This is a note to let you know that I've just added the patch titled

usb: core: hub: Improved device recognition on remote wakeup

to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From 9c06ac4c83df6d6fbdbf7488fbad822b4002ba19 Mon Sep 17 00:00:00 2001

From: Keiya Nobuta nobuta.keiya@fujitsu.com Date: Thu, 9 Jan 2020 14:14:48 +0900 Subject: usb: core: hub: Improved device recognition on remote wakeup

If hub_activate() is called before D+ has stabilized after remote wakeup, the following situation might occur:

__ ___________________ / \ / D+ __/ __/

Hub _______________________________ | ^ ^ ^ | | | | Host _____v__|___|___________|______ | | | | | | | -- Interrupt Transfer (*3) | | -- ClearPortFeature (*2) | -- GetPortStatus (*1) -- Host detects remote wakeup

- D+ goes high, Host starts running by remote wakeup - D+ is not stable, goes low - Host requests GetPortStatus at (*1) and gets the following hub status: - Current Connect Status bit is 0 - Connect Status Change bit is 1 - D+ stabilizes, goes high - Host requests ClearPortFeature and thus Connect Status Change bit is cleared at (*2) - After waiting 100 ms, Host starts the Interrupt Transfer at (*3) - Since the Connect Status Change bit is 0, Hub returns NAK.

In this case, port_event() is not called in hub_event() and Host cannot recognize device. To solve this issue, flag change_bits even if only Connect Status Change bit is 1 when got in the first GetPortStatus.

This issue occurs rarely because it only if D+ changes during a very short time between GetPortStatus and ClearPortFeature. However, it is fatal if it occurs in embedded system.

Signed-off-by: Keiya Nobuta nobuta.keiya@fujitsu.com Cc: stable stable@vger.kernel.org Acked-by: Alan Stern stern@rowland.harvard.edu Link: https://lore.kernel.org/r/20200109051448.28150-1-nobuta.keiya@fujitsu.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/core/hub.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 8c4e5adbf820..3405b146edc9 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1192,6 +1192,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) * PORT_OVER_CURRENT is not. So check for any of them. */ if (udev || (portstatus & USB_PORT_STAT_CONNECTION) || + (portchange & USB_PORT_STAT_C_CONNECTION) || (portstatus & USB_PORT_STAT_OVERCURRENT) || (portchange & USB_PORT_STAT_C_OVERCURRENT)) set_bit(port1, hub->change_bits);