There were some problem in ipq8074 gen2 pcie phy init sequence, fix these to make gen2 pcie port on ipq8074 to work.
Fixes: eef243d04b2b6 ("phy: qcom-qmp: Add support for IPQ8074")
Cc: stable@vger.kernel.org Co-developed-by: Selvam Sathappan Periakaruppan speriaka@codeaurora.org Signed-off-by: Selvam Sathappan Periakaruppan speriaka@codeaurora.org Signed-off-by: Sivaprakash Murugesan sivaprak@codeaurora.org --- drivers/phy/qualcomm/phy-qcom-qmp.c | 16 +++++++++------- drivers/phy/qualcomm/phy-qcom-qmp.h | 2 ++ 2 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index e91040af3394..ba277136f52b 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -504,8 +504,8 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf), QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1), QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0), - QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0x1f), - QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f), QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6), QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf), QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0), @@ -531,7 +531,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0), QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1), - QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0xa), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1), @@ -540,7 +539,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19), QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19), - QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x7), };
static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = { @@ -548,6 +546,8 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6), QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2), QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36), + QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a), };
static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = { @@ -558,7 +558,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb), QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b), QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4), - QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x4), };
static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = { @@ -1673,6 +1672,9 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { .pwrdn_ctrl = SW_PWRDN, };
+static const char * const ipq8074_pciephy_clk_l[] = { + "aux", "cfg_ahb", +}; /* list of resets */ static const char * const ipq8074_pciephy_reset_l[] = { "phy", "common", @@ -1690,8 +1692,8 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = { .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl), .pcs_tbl = ipq8074_pcie_pcs_tbl, .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl), - .clk_list = NULL, - .num_clks = 0, + .clk_list = ipq8074_pciephy_clk_l, + .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l), .reset_list = ipq8074_pciephy_reset_l, .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l), .vreg_list = NULL, diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 6d017a0c0c8d..832b3d098403 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -77,6 +77,8 @@ #define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc
/* Only for QMP V2 PHY - TX registers */ +#define QSERDES_TX_EMP_POST1_LVL 0x018 +#define QSERDES_TX_SLEW_CNTL 0x040 #define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054 #define QSERDES_TX_DEBUG_BUS_SEL 0x064 #define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068
Hi
[This is an automated email]
This commit has been processed because it contains a "Fixes:" tag fixing commit: eef243d04b2b ("phy: qcom-qmp: Add support for IPQ8074").
The bot has tested the following trees: v5.7.7, v5.4.50, v4.19.131, v4.14.187.
v5.7.7: Build OK! v5.4.50: Build OK! v4.19.131: Build OK! v4.14.187: Failed to apply! Possible dependencies: e2248617ec157 ("phy: qcom-qmp: Move register offsets to header file")
NOTE: The patch will not be queued to stable trees until it is upstream.
How should we proceed with this patch?
On 05-07-20, 14:47, Sivaprakash Murugesan wrote:
There were some problem in ipq8074 gen2 pcie phy init sequence, fix
Can you please describe these problems, it would help review to understand the issues and also for future reference to you
these to make gen2 pcie port on ipq8074 to work.
Fixes: eef243d04b2b6 ("phy: qcom-qmp: Add support for IPQ8074")
Cc: stable@vger.kernel.org Co-developed-by: Selvam Sathappan Periakaruppan speriaka@codeaurora.org Signed-off-by: Selvam Sathappan Periakaruppan speriaka@codeaurora.org Signed-off-by: Sivaprakash Murugesan sivaprak@codeaurora.org
drivers/phy/qualcomm/phy-qcom-qmp.c | 16 +++++++++------- drivers/phy/qualcomm/phy-qcom-qmp.h | 2 ++ 2 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index e91040af3394..ba277136f52b 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -504,8 +504,8 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf), QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1), QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
- QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0x1f),
- QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
- QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
- QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f), QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6), QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf), QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
@@ -531,7 +531,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0), QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
- QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0xa), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
@@ -540,7 +539,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19), QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
- QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x7),
}; static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = { @@ -548,6 +546,8 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6), QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2), QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
- QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36),
- QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a),
}; static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = { @@ -558,7 +558,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb), QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b), QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
- QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x4),
}; static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = { @@ -1673,6 +1672,9 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { .pwrdn_ctrl = SW_PWRDN, }; +static const char * const ipq8074_pciephy_clk_l[] = {
- "aux", "cfg_ahb",
+}; /* list of resets */ static const char * const ipq8074_pciephy_reset_l[] = { "phy", "common", @@ -1690,8 +1692,8 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = { .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl), .pcs_tbl = ipq8074_pcie_pcs_tbl, .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
- .clk_list = NULL,
- .num_clks = 0,
- .clk_list = ipq8074_pciephy_clk_l,
- .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
I see patch is modifying some register values and then adding clks, in the absence of proper patch description it is extremely hard to understand what is going on..
.reset_list = ipq8074_pciephy_reset_l, .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l), .vreg_list = NULL, diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 6d017a0c0c8d..832b3d098403 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -77,6 +77,8 @@ #define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc /* Only for QMP V2 PHY - TX registers */ +#define QSERDES_TX_EMP_POST1_LVL 0x018 +#define QSERDES_TX_SLEW_CNTL 0x040 #define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054 #define QSERDES_TX_DEBUG_BUS_SEL 0x064
#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068
2.7.4
On 7/13/2020 11:25 AM, Vinod Koul wrote:
On 05-07-20, 14:47, Sivaprakash Murugesan wrote:
There were some problem in ipq8074 gen2 pcie phy init sequence, fix
Can you please describe these problems, it would help review to understand the issues and also for future reference to you
Hi Vinod,
As you mentioned we are updating few register values
and also adding clocks and resets.
the register values are given by the Hardware team and there
is some fine tuning values are provided by Hardware team for the
issues we faced downstream.
Also, few register values are typos for example QSERDES_RX_SIGDET_CNTRL
is a rx register it was wrongly in serdes table.
I will try to mention these details in next patch.
Hi Sivaprakash,
On 29-07-20, 12:15, Sivaprakash Murugesan wrote:
On 7/13/2020 11:25 AM, Vinod Koul wrote:
On 05-07-20, 14:47, Sivaprakash Murugesan wrote:
There were some problem in ipq8074 gen2 pcie phy init sequence, fix
Can you please describe these problems, it would help review to understand the issues and also for future reference to you
Hi Vinod,
As you mentioned we are updating few register values
and also adding clocks and resets.
the register values are given by the Hardware team and there
is some fine tuning values are provided by Hardware team for the
issues we faced downstream.
Also, few register values are typos for example QSERDES_RX_SIGDET_CNTRL
is a rx register it was wrongly in serdes table.
I will try to mention these details in next patch.
The right thing to do would be a change per patch explaining the reason. For example, fixing typos in QSERDES_RX_SIGDET_CNTRL, then another to update tuning values based on hw recommendations. Clocks and reset should be different patch
This helps us review each change for what it does and helps you down the line to figure why a line of code was changed
HTH
linux-stable-mirror@lists.linaro.org
-
Sasha Levin -
Sivaprakash Murugesan -
Vinod Koul