The connector type for the DataImage SCF0700C48GGU18 panel is missing and devm_drm_panel_bridge_add() requires connector type to be set. This leads to a warning and a backtrace in the kernel log and panel does not work: " WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8 " The warning is triggered by a check for valid connector type in devm_drm_panel_bridge_add(). If there is no valid connector type set for a panel, the warning is printed and panel is not added. Fill in the missing connector type to fix the warning and make the panel operational once again.

Cc: stable@vger.kernel.org Fixes: 97ceb1fb08b6 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18") Signed-off-by: Marek Vasut marex@nabladev.com --- Cc: David Airlie airlied@gmail.com Cc: Jessica Zhang jesszhan0024@gmail.com Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Cc: Maxime Ripard mripard@kernel.org Cc: Neil Armstrong neil.armstrong@linaro.org Cc: Simona Vetter simona@ffwll.ch Cc: Thomas Zimmermann tzimmermann@suse.de Cc: dri-devel@lists.freedesktop.org Cc: kernel@dh-electronics.com Cc: linux-kernel@vger.kernel.org --- drivers/gpu/drm/panel/panel-simple.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 3acc9f3dac16a..e33ee2308e715 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1900,6 +1900,7 @@ static const struct panel_desc dataimage_scf0700c48ggu18 = { }, .bus_format = MEDIA_BUS_FMT_RGB888_1X24, .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, + .connector_type = DRM_MODE_CONNECTOR_DPI, };

static const struct display_timing dlc_dlc0700yzg_1_timing = {