From: Jason Gerecke jason.gerecke@wacom.com

The serial number and tool type information that is reported by the tablet while a pen is merely "in prox" instead of fully "in range" can be stale and cause us to report incorrect tool information. Serial number, tool type, and other information is only valid once the pen comes fully in range so we should be careful to not use this information until that point.

In particular, this issue may cause the driver to incorectly report BTN_TOOL_RUBBER after switching from the eraser tool back to the pen.

Fixes: a48324de6d4d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range") Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Jason Gerecke jason.gerecke@wacom.com Reviewed-by: Aaron Armstrong Skomra aaron.skomra@wacom.com Signed-off-by: Benjamin Tissoires benjamin.tissoires@redhat.com --- Original commit in Linus' tree: 2cc08800a6b9fcda7c7afbcf2da1a6e8808da725

drivers/hid/wacom_wac.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 22e80685cd52..53363368da8c 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -1225,13 +1225,13 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) /* Add back in missing bits of ID for non-USI pens */ wacom->id[0] |= (wacom->serial[0] >> 32) & 0xFFFFF; } - wacom->tool[0] = wacom_intuos_get_tool_type(wacom_intuos_id_mangle(wacom->id[0]));

for (i = 0; i < pen_frames; i++) { unsigned char *frame = &data[i*pen_frame_len + 1]; bool valid = frame[0] & 0x80; bool prox = frame[0] & 0x40; bool range = frame[0] & 0x20; + bool invert = frame[0] & 0x10;

if (!valid) continue; @@ -1240,8 +1240,13 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) wacom->shared->stylus_in_proximity = false; wacom_exit_report(wacom); input_sync(pen_input); + + wacom->tool[0] = 0; + wacom->id[0] = 0; + wacom->serial[0] = 0; return; } + if (range) { /* Fix rotation alignment: userspace expects zero at left */ int16_t rotation = (int16_t)get_unaligned_le16(&frame[9]); @@ -1249,6 +1254,16 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) if (rotation > 899) rotation -= 1800;

+ if (!wacom->tool[0]) { /* first in range */ + /* Going into range select tool */ + if (invert) + wacom->tool[0] = BTN_TOOL_RUBBER; + else if (wacom->id[0]) + wacom->tool[0] = wacom_intuos_get_tool_type(wacom->id[0]); + else + wacom->tool[0] = BTN_TOOL_PEN; + } + input_report_abs(pen_input, ABS_X, get_unaligned_le16(&frame[1])); input_report_abs(pen_input, ABS_Y, get_unaligned_le16(&frame[3])); input_report_abs(pen_input, ABS_TILT_X, (char)frame[7]);