The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x c158647c107358bf1be579f98e4bb705c1953292 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2025022400-flinch-overfeed-d8e9@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From c158647c107358bf1be579f98e4bb705c1953292 Mon Sep 17 00:00:00 2001 From: Komal Bajaj quic_kbajaj@quicinc.com Date: Tue, 19 Nov 2024 12:16:08 +0530 Subject: [PATCH] EDAC/qcom: Correct interrupt enable register configuration

The previous implementation incorrectly configured the cmn_interrupt_2_enable register for interrupt handling. Using cmn_interrupt_2_enable to configure Tag, Data RAM ECC interrupts would lead to issues like double handling of the interrupts (EL1 and EL3) as cmn_interrupt_2_enable is meant to be configured for interrupts which needs to be handled by EL3.

EL1 LLCC EDAC driver needs to use cmn_interrupt_0_enable register to configure Tag, Data RAM ECC interrupts instead of cmn_interrupt_2_enable.

Fixes: 27450653f1db ("drivers: edac: Add EDAC driver support for QCOM SoCs") Signed-off-by: Komal Bajaj quic_kbajaj@quicinc.com Signed-off-by: Borislav Petkov (AMD) bp@alien8.de Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Cc: stable@kernel.org Link: https://lore.kernel.org/r/20241119064608.12326-1-quic_kbajaj@quicinc.com

diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c index 04c42c83a2ba..f3da9385ca0d 100644 --- a/drivers/edac/qcom_edac.c +++ b/drivers/edac/qcom_edac.c @@ -95,7 +95,7 @@ static int qcom_llcc_core_setup(struct llcc_drv_data *drv, struct regmap *llcc_b * Configure interrupt enable registers such that Tag, Data RAM related * interrupts are propagated to interrupt controller for servicing */ - ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_2_enable, + ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_0_enable, TRP0_INTERRUPT_ENABLE, TRP0_INTERRUPT_ENABLE); if (ret) @@ -113,7 +113,7 @@ static int qcom_llcc_core_setup(struct llcc_drv_data *drv, struct regmap *llcc_b if (ret) return ret;

- ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_2_enable, + ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_0_enable, DRP0_INTERRUPT_ENABLE, DRP0_INTERRUPT_ENABLE); if (ret)