There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit the fixup to only affect the relevant PCIe bridges.
Cc: stable@vger.kernel.org Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org ---
Stan, I picked up all the suggested device id's from the previous thread and added 0x1000 for QCS404. I looked at creating platform specific defines in pci_ids.h, but SDM845 has both 106 and 107... Please let me know if you would prefer that I do this anyway.
drivers/pci/controller/dwc/pcie-qcom.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 5ea527a6bd9f..138e1a2d21cc 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1439,7 +1439,13 @@ static void qcom_fixup_class(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_PCI << 8; } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class);
static struct platform_driver qcom_pcie_driver = { .probe = qcom_pcie_probe,
Hi Bjorn,
On 12/27/19 3:27 AM, Bjorn Andersson wrote:
There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit the fixup to only affect the relevant PCIe bridges.
Cc: stable@vger.kernel.org Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org
Stan, I picked up all the suggested device id's from the previous thread and added 0x1000 for QCS404. I looked at creating platform specific defines in pci_ids.h, but SDM845 has both 106 and 107... Please let me know if you would prefer that I do this anyway.
Looks good,
Acked-by: Stanimir Varbanov svarbanov@mm-sol.com
drivers/pci/controller/dwc/pcie-qcom.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 5ea527a6bd9f..138e1a2d21cc 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1439,7 +1439,13 @@ static void qcom_fixup_class(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_PCI << 8; } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class); static struct platform_driver qcom_pcie_driver = { .probe = qcom_pcie_probe,
On 27/12/2019 09:51, Stanimir Varbanov wrote:
On 12/27/19 3:27 AM, Bjorn Andersson wrote:
There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit the fixup to only affect the relevant PCIe bridges.
Cc: stable@vger.kernel.org Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org
Stan, I picked up all the suggested device id's from the previous thread and added 0x1000 for QCS404. I looked at creating platform specific defines in pci_ids.h, but SDM845 has both 106 and 107... Please let me know if you would prefer that I do this anyway.
Looks good,
Acked-by: Stanimir Varbanov svarbanov@mm-sol.com
drivers/pci/controller/dwc/pcie-qcom.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 5ea527a6bd9f..138e1a2d21cc 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1439,7 +1439,13 @@ static void qcom_fixup_class(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_PCI << 8; } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class);
Hrmmm... still not CCed on the patch, and still don't think the fixup is required(?) for 0x106 and 0x107.
Regards.
On Sat 28 Dec 07:41 PST 2019, Marc Gonzalez wrote:
On 27/12/2019 09:51, Stanimir Varbanov wrote:
On 12/27/19 3:27 AM, Bjorn Andersson wrote:
There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit the fixup to only affect the relevant PCIe bridges.
Cc: stable@vger.kernel.org Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org
Stan, I picked up all the suggested device id's from the previous thread and added 0x1000 for QCS404. I looked at creating platform specific defines in pci_ids.h, but SDM845 has both 106 and 107... Please let me know if you would prefer that I do this anyway.
Looks good,
Acked-by: Stanimir Varbanov svarbanov@mm-sol.com
drivers/pci/controller/dwc/pcie-qcom.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 5ea527a6bd9f..138e1a2d21cc 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1439,7 +1439,13 @@ static void qcom_fixup_class(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_PCI << 8; } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class);
Hrmmm... still not CCed on the patch,
You are Cc'ed on the patch, but as usual your mail server responds "451 too many errors from your ip" and throw my emails away.
and still don't think the fixup is required(?) for 0x106 and 0x107.
I re-read your reply in my v1 thread. So we know that 0x104 doesn't need the fixup, so resumably only 0x101 needs the fixup?
Regards, Bjorn
On 29/12/2019 03:45, Bjorn Andersson wrote:
On Sat 28 Dec 07:41 PST 2019, Marc Gonzalez wrote:
On 27/12/2019 09:51, Stanimir Varbanov wrote:
On 12/27/19 3:27 AM, Bjorn Andersson wrote:
There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit the fixup to only affect the relevant PCIe bridges.
Cc: stable@vger.kernel.org Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org
Stan, I picked up all the suggested device id's from the previous thread and added 0x1000 for QCS404. I looked at creating platform specific defines in pci_ids.h, but SDM845 has both 106 and 107... Please let me know if you would prefer that I do this anyway.
Looks good,
Acked-by: Stanimir Varbanov svarbanov@mm-sol.com
drivers/pci/controller/dwc/pcie-qcom.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 5ea527a6bd9f..138e1a2d21cc 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1439,7 +1439,13 @@ static void qcom_fixup_class(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_PCI << 8; } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class);
Hrmmm... still not CCed on the patch,
You are Cc'ed on the patch, but as usual your mail server responds "451 too many errors from your ip" and throw my emails away.
and still don't think the fixup is required(?) for 0x106 and 0x107.
I re-read your reply in my v1 thread. So we know that 0x104 doesn't need the fixup, so presumably only 0x101 needs the fixup?
I apologize for the tone of my reply. I did not mean to sound so snarky.
All I can say is that, if I remember correctly, the fixup was not necessary on apq8098 (0x0105) and it was probably not required on msm8996 and sdm845. For older platforms, all bets are off.
Regards.
On Mon, Dec 30, 2019 at 09:25:28PM +0100, Marc Gonzalez wrote:
On 29/12/2019 03:45, Bjorn Andersson wrote:
On Sat 28 Dec 07:41 PST 2019, Marc Gonzalez wrote:
On 27/12/2019 09:51, Stanimir Varbanov wrote:
On 12/27/19 3:27 AM, Bjorn Andersson wrote:
There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit the fixup to only affect the relevant PCIe bridges.
Cc: stable@vger.kernel.org Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org
Stan, I picked up all the suggested device id's from the previous thread and added 0x1000 for QCS404. I looked at creating platform specific defines in pci_ids.h, but SDM845 has both 106 and 107... Please let me know if you would prefer that I do this anyway.
Looks good,
Acked-by: Stanimir Varbanov svarbanov@mm-sol.com
drivers/pci/controller/dwc/pcie-qcom.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 5ea527a6bd9f..138e1a2d21cc 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1439,7 +1439,13 @@ static void qcom_fixup_class(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_PCI << 8; } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class);
Hrmmm... still not CCed on the patch,
You are Cc'ed on the patch, but as usual your mail server responds "451 too many errors from your ip" and throw my emails away.
and still don't think the fixup is required(?) for 0x106 and 0x107.
I re-read your reply in my v1 thread. So we know that 0x104 doesn't need the fixup, so presumably only 0x101 needs the fixup?
I apologize for the tone of my reply. I did not mean to sound so snarky.
All I can say is that, if I remember correctly, the fixup was not necessary on apq8098 (0x0105) and it was probably not required on msm8996 and sdm845. For older platforms, all bets are off.
How are we proceeding with this patch then ?
Thanks, Lorenzo
Hi Lorenzo,
On 2/21/20 4:35 PM, Lorenzo Pieralisi wrote:
On Mon, Dec 30, 2019 at 09:25:28PM +0100, Marc Gonzalez wrote:
On 29/12/2019 03:45, Bjorn Andersson wrote:
On Sat 28 Dec 07:41 PST 2019, Marc Gonzalez wrote:
On 27/12/2019 09:51, Stanimir Varbanov wrote:
On 12/27/19 3:27 AM, Bjorn Andersson wrote:
There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit the fixup to only affect the relevant PCIe bridges.
Cc: stable@vger.kernel.org Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org
Stan, I picked up all the suggested device id's from the previous thread and added 0x1000 for QCS404. I looked at creating platform specific defines in pci_ids.h, but SDM845 has both 106 and 107... Please let me know if you would prefer that I do this anyway.
Looks good,
Acked-by: Stanimir Varbanov svarbanov@mm-sol.com
drivers/pci/controller/dwc/pcie-qcom.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 5ea527a6bd9f..138e1a2d21cc 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1439,7 +1439,13 @@ static void qcom_fixup_class(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_PCI << 8; } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class);
Hrmmm... still not CCed on the patch,
You are Cc'ed on the patch, but as usual your mail server responds "451 too many errors from your ip" and throw my emails away.
and still don't think the fixup is required(?) for 0x106 and 0x107.
I re-read your reply in my v1 thread. So we know that 0x104 doesn't need the fixup, so presumably only 0x101 needs the fixup?
I apologize for the tone of my reply. I did not mean to sound so snarky.
All I can say is that, if I remember correctly, the fixup was not necessary on apq8098 (0x0105) and it was probably not required on msm8996 and sdm845. For older platforms, all bets are off.
How are we proceeding with this patch then ?
It took too much time, please take it as-is in v2 with my Ack.
We can drop the not-affected SoCs with follow-up patches once we are sure that we do not break the supported SoCs.
On Thu, Dec 26, 2019 at 05:27:17PM -0800, Bjorn Andersson wrote:
There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit the fixup to only affect the relevant PCIe bridges.
Cc: stable@vger.kernel.org
Hi Bjorn,
to simplify stable's merging, would you mind helping me with the stable releases you want this patch to apply to please ?
I will apply it then.
Thanks, Lorenzo
Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org
Stan, I picked up all the suggested device id's from the previous thread and added 0x1000 for QCS404. I looked at creating platform specific defines in pci_ids.h, but SDM845 has both 106 and 107... Please let me know if you would prefer that I do this anyway.
drivers/pci/controller/dwc/pcie-qcom.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 5ea527a6bd9f..138e1a2d21cc 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1439,7 +1439,13 @@ static void qcom_fixup_class(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_PCI << 8; } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class); static struct platform_driver qcom_pcie_driver = { .probe = qcom_pcie_probe, -- 2.24.0
Hi Lorenzo,
On 2/26/20 12:22 PM, Lorenzo Pieralisi wrote:
On Thu, Dec 26, 2019 at 05:27:17PM -0800, Bjorn Andersson wrote:
There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit the fixup to only affect the relevant PCIe bridges.
Cc: stable@vger.kernel.org
Hi Bjorn,
to simplify stable's merging, would you mind helping me with the stable releases you want this patch to apply to please ?
We've to have this in the patch:
Cc: stable@vger.kernel.org # v5.2+ Fixes: 322f03436692 ("PCI: qcom: Use default config space read function")
I will apply it then.
Thanks, Lorenzo
Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org
Stan, I picked up all the suggested device id's from the previous thread and added 0x1000 for QCS404. I looked at creating platform specific defines in pci_ids.h, but SDM845 has both 106 and 107... Please let me know if you would prefer that I do this anyway.
drivers/pci/controller/dwc/pcie-qcom.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 5ea527a6bd9f..138e1a2d21cc 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1439,7 +1439,13 @@ static void qcom_fixup_class(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_PCI << 8; } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class); static struct platform_driver qcom_pcie_driver = { .probe = qcom_pcie_probe, -- 2.24.0
On Wed, Feb 26, 2020 at 12:56:23PM +0200, Stanimir Varbanov wrote:
Hi Lorenzo,
On 2/26/20 12:22 PM, Lorenzo Pieralisi wrote:
On Thu, Dec 26, 2019 at 05:27:17PM -0800, Bjorn Andersson wrote:
There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit the fixup to only affect the relevant PCIe bridges.
Cc: stable@vger.kernel.org
Hi Bjorn,
to simplify stable's merging, would you mind helping me with the stable releases you want this patch to apply to please ?
We've to have this in the patch:
Cc: stable@vger.kernel.org # v5.2+ Fixes: 322f03436692 ("PCI: qcom: Use default config space read function")
Done, applied to pci/qcom for v5.7.
Thanks, Lorenzo
I will apply it then.
Thanks, Lorenzo
Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org
Stan, I picked up all the suggested device id's from the previous thread and added 0x1000 for QCS404. I looked at creating platform specific defines in pci_ids.h, but SDM845 has both 106 and 107... Please let me know if you would prefer that I do this anyway.
drivers/pci/controller/dwc/pcie-qcom.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 5ea527a6bd9f..138e1a2d21cc 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1439,7 +1439,13 @@ static void qcom_fixup_class(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_PCI << 8; } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class); static struct platform_driver qcom_pcie_driver = { .probe = qcom_pcie_probe, -- 2.24.0
-- regards, Stan
linux-stable-mirror@lists.linaro.org
-
Bjorn Andersson -
Lorenzo Pieralisi -
Marc Gonzalez -
Stanimir Varbanov