From: Douglas Anderson dianders@chromium.org

commit b82d6c1f8f8288f744a9dcc16cd3085d535decca upstream.

The commit fc3a2fcaa1ba ("mwifiex: use atomic bitops to represent adapter status variables") had a fairly straightforward bug in it. It contained this bit of diff:

- if (!adapter->is_suspended) { + if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) {

As you can see the patch missed the "!" when converting to the atomic bitops. This meant that the resume hasn't done anything at all since that commit landed and suspend/resume for mwifiex SDIO cards has been totally broken.

After fixing this mwifiex suspend/resume appears to work again, at least with the simple testing I've done.

Fixes: fc3a2fcaa1ba ("mwifiex: use atomic bitops to represent adapter status variables") Cc: stable@vger.kernel.org Signed-off-by: Douglas Anderson dianders@chromium.org Reviewed-by: Brian Norris briannorris@chromium.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/wireless/marvell/mwifiex/sdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/marvell/mwifiex/sdio.c +++ b/drivers/net/wireless/marvell/mwifiex/sdio.c @@ -181,7 +181,7 @@ static int mwifiex_sdio_resume(struct de

adapter = card->adapter;

- if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) { + if (!test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) { mwifiex_dbg(adapter, WARN, "device already resumed\n"); return 0;

From: Ard Biesheuvel ard.biesheuvel@linaro.org

commit 95e0cf3caeb11e1b0398c747b5cfa12828263824 upstream.

The I2C host driver for SynQuacer fails to populate the of_node and ACPI companion fields of the struct i2c_adapter it instantiates, resulting in enumeration of the subordinate I2C bus to fail.

Fixes: 0d676a6c4390 ("i2c: add support for Socionext SynQuacer I2C controller") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Ard Biesheuvel ard.biesheuvel@linaro.org Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/i2c/busses/i2c-synquacer.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/i2c/busses/i2c-synquacer.c +++ b/drivers/i2c/busses/i2c-synquacer.c @@ -602,6 +602,8 @@ static int synquacer_i2c_probe(struct pl i2c->adapter = synquacer_i2c_ops; i2c_set_adapdata(&i2c->adapter, i2c); i2c->adapter.dev.parent = &pdev->dev; + i2c->adapter.dev.of_node = pdev->dev.of_node; + ACPI_COMPANION_SET(&i2c->adapter.dev, ACPI_COMPANION(&pdev->dev)); i2c->adapter.nr = pdev->id; init_completion(&i2c->completion);

From: Charles Keepax ckeepax@opensource.cirrus.com

commit b9bb3fdf4e870fb655064f5c3c81c1fee7fd89ce upstream.

irq_create_mapping calls irq_find_mapping internally and will use the found mapping if one exists, so there is no need to manually call this from i2c_smbus_host_notify_to_irq.

Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com Reviewed-by: Benjamin Tissoires benjamin.tissoires@redhat.com Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/i2c/i2c-core-base.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -306,10 +306,7 @@ static int i2c_smbus_host_notify_to_irq( if (client->flags & I2C_CLIENT_TEN) return -EINVAL;

- irq = irq_find_mapping(adap->host_notify_domain, client->addr); - if (!irq) - irq = irq_create_mapping(adap->host_notify_domain, - client->addr); + irq = irq_create_mapping(adap->host_notify_domain, client->addr);

return irq > 0 ? irq : -ENXIO; }

From: Jim Broadus jbroadus@gmail.com

commit 93b6604c5a669d84e45fe5129294875bf82eb1ff upstream.

A previous change allowed I2C client devices to discover new IRQs upon reprobe by clearing the IRQ in i2c_device_remove. However, if an IRQ was assigned in i2c_new_device, that information is lost.

For example, the touchscreen and trackpad devices on a Dell Inspiron laptop are I2C devices whose IRQs are defined by ACPI extended IRQ types. The client device structures are initialized during an ACPI walk. After removing the i2c_hid device, modprobe fails.

This change caches the initial IRQ value in i2c_new_device and then resets the client device IRQ to the initial value in i2c_device_remove.

Fixes: 6f108dd70d30 ("i2c: Clear client->irq in i2c_device_remove") Signed-off-by: Jim Broadus jbroadus@gmail.com Reviewed-by: Benjamin Tissoires benjamin.tissoires@redhat.com Reviewed-by: Charles Keepax ckeepax@opensource.cirrus.com [wsa: this is an easy to backport fix for the regression. We will refactor the code to handle irq assignments better in general.] Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/i2c/i2c-core-base.c | 9 +++++---- include/linux/i2c.h | 1 + 2 files changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -430,7 +430,7 @@ static int i2c_device_remove(struct devi dev_pm_clear_wake_irq(&client->dev); device_init_wakeup(&client->dev, false);

- client->irq = 0; + client->irq = client->init_irq;

return status; } @@ -741,10 +741,11 @@ i2c_new_device(struct i2c_adapter *adap, client->flags = info->flags; client->addr = info->addr;

- client->irq = info->irq; - if (!client->irq) - client->irq = i2c_dev_irq_from_resources(info->resources, + client->init_irq = info->irq; + if (!client->init_irq) + client->init_irq = i2c_dev_irq_from_resources(info->resources, info->num_resources); + client->irq = client->init_irq;

strlcpy(client->name, info->type, sizeof(client->name));

--- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -333,6 +333,7 @@ struct i2c_client { char name[I2C_NAME_SIZE]; struct i2c_adapter *adapter; /* the adapter we sit on */ struct device dev; /* the device structure */ + int init_irq; /* irq set at initialization */ int irq; /* irq issued by device */ struct list_head detected; #if IS_ENABLED(CONFIG_I2C_SLAVE)

From: Kailang Yang kailang@realtek.com

commit 0a29c57b76624723b6b00c027e0e992d130ace49 upstream.

Add two Dell platform for headset mode.

[ Note: this is a further correction / addition of the previous pin-based quirks for Dell machines; another entry for ALC236 with the d-mic pin 0x12 and an entry for ALC295 -- tiwai ]

Fixes: b26e36b7ef36 ("ALSA: hda/realtek - add two more pin configuration sets to quirk table") Signed-off-by: Kailang Yang kailang@realtek.com Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/pci/hda/patch_realtek.c | 7 +++++++ 1 file changed, 7 insertions(+)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7172,6 +7172,10 @@ static const struct snd_hda_pin_quirk al {0x21, 0x02211020}), SND_HDA_PIN_QUIRK(0x10ec0236, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, {0x21, 0x02211020}), + SND_HDA_PIN_QUIRK(0x10ec0236, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, + {0x12, 0x40000000}, + {0x14, 0x90170110}, + {0x21, 0x02211020}), SND_HDA_PIN_QUIRK(0x10ec0255, 0x1028, "Dell", ALC255_FIXUP_DELL2_MIC_NO_PRESENCE, {0x14, 0x90170110}, {0x21, 0x02211020}), @@ -7446,6 +7450,9 @@ static const struct snd_hda_pin_quirk al {0x17, 0x90170110}, {0x21, 0x04211020}), SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, + {0x14, 0x90170110}, + {0x21, 0x04211020}), + SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, ALC295_STANDARD_PINS, {0x17, 0x21014020}, {0x18, 0x21a19030}),

From: Takashi Iwai tiwai@suse.de

commit 3887c26c0e24d50a4d0ce20cf4726737cee1a2fd upstream.

Some ASUS models like Q325UAR with ALC295 codec requires the same fixup that has been applied to ALC294 codec. Just copy the entry with the pin matching to cover ALC295 too.

BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1784485 Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/pci/hda/patch_realtek.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7451,6 +7451,10 @@ static const struct snd_hda_pin_quirk al {0x12, 0x90a60130}, {0x17, 0x90170110}, {0x21, 0x04211020}), + SND_HDA_PIN_QUIRK(0x10ec0295, 0x1043, "ASUS", ALC294_FIXUP_ASUS_SPK, + {0x12, 0x90a60130}, + {0x17, 0x90170110}, + {0x21, 0x03211020}), SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, {0x14, 0x90170110}, {0x21, 0x04211020}),

From: Alan Stern stern@rowland.harvard.edu

commit c114944d7d67f24e71562fcfc18d550ab787e4d4 upstream.

The syzkaller USB fuzzer spotted a slab-out-of-bounds bug in the ds2490 driver. This bug is caused by improper use of the altsetting array in the usb_interface structure (the array's entries are not always stored in numerical order), combined with a naive assumption that all interfaces probed by the driver will have the expected number of altsettings.

The bug can be fixed by replacing references to the possibly non-existent intf->altsetting[alt] entry with the guaranteed-to-exist intf->cur_altsetting entry.

Signed-off-by: Alan Stern stern@rowland.harvard.edu Reported-and-tested-by: syzbot+d65f673b847a1a96cdba@syzkaller.appspotmail.com CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/w1/masters/ds2490.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/w1/masters/ds2490.c +++ b/drivers/w1/masters/ds2490.c @@ -1016,15 +1016,15 @@ static int ds_probe(struct usb_interface /* alternative 3, 1ms interrupt (greatly speeds search), 64 byte bulk */ alt = 3; err = usb_set_interface(dev->udev, - intf->altsetting[alt].desc.bInterfaceNumber, alt); + intf->cur_altsetting->desc.bInterfaceNumber, alt); if (err) { dev_err(&dev->udev->dev, "Failed to set alternative setting %d " "for %d interface: err=%d.\n", alt, - intf->altsetting[alt].desc.bInterfaceNumber, err); + intf->cur_altsetting->desc.bInterfaceNumber, err); goto err_out_clear; }

- iface_desc = &intf->altsetting[alt]; + iface_desc = intf->cur_altsetting; if (iface_desc->desc.bNumEndpoints != NUM_EP-1) { pr_info("Num endpoints=%d. It is not DS9490R.\n", iface_desc->desc.bNumEndpoints);

From: Malte Leip malte@leip.net

commit c409ca3be3c6ff3a1eeb303b191184e80d412862 upstream.

Change the validation of number_of_packets in get_pipe to compare the number of packets to a fixed maximum number of packets allowed, set to be 1024. This number was chosen due to it being used by other drivers as well, for example drivers/usb/host/uhci-q.c

Background/reason: The get_pipe function in stub_rx.c validates the number of packets in isochronous mode and aborts with an error if that number is too large, in order to prevent malicious input from possibly triggering large memory allocations. This was previously done by checking whether pdu->u.cmd_submit.number_of_packets is bigger than the number of packets that would be needed for pdu->u.cmd_submit.transfer_buffer_length bytes if all except possibly the last packet had maximum length, given by usb_endpoint_maxp(epd) * usb_endpoint_maxp_mult(epd). This leads to an error if URBs with packets shorter than the maximum possible length are submitted, which is allowed according to Documentation/driver-api/usb/URB.rst and occurs for example with the snd-usb-audio driver.

Fixes: c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input") Signed-off-by: Malte Leip malte@leip.net Cc: stable stable@vger.kernel.org Acked-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/usbip/stub_rx.c | 12 +++--------- drivers/usb/usbip/usbip_common.h | 7 +++++++ 2 files changed, 10 insertions(+), 9 deletions(-)

--- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -361,16 +361,10 @@ static int get_pipe(struct stub_device * }

if (usb_endpoint_xfer_isoc(epd)) { - /* validate packet size and number of packets */ - unsigned int maxp, packets, bytes; - - maxp = usb_endpoint_maxp(epd); - maxp *= usb_endpoint_maxp_mult(epd); - bytes = pdu->u.cmd_submit.transfer_buffer_length; - packets = DIV_ROUND_UP(bytes, maxp); - + /* validate number of packets */ if (pdu->u.cmd_submit.number_of_packets < 0 || - pdu->u.cmd_submit.number_of_packets > packets) { + pdu->u.cmd_submit.number_of_packets > + USBIP_MAX_ISO_PACKETS) { dev_err(&sdev->udev->dev, "CMD_SUBMIT: isoc invalid num packets %d\n", pdu->u.cmd_submit.number_of_packets); --- a/drivers/usb/usbip/usbip_common.h +++ b/drivers/usb/usbip/usbip_common.h @@ -121,6 +121,13 @@ extern struct device_attribute dev_attr_ #define USBIP_DIR_OUT 0x00 #define USBIP_DIR_IN 0x01

+/* + * Arbitrary limit for the maximum number of isochronous packets in an URB, + * compare for example the uhci_submit_isochronous function in + * drivers/usb/host/uhci-q.c + */ +#define USBIP_MAX_ISO_PACKETS 1024 + /** * struct usbip_header_basic - data pertinent to every request * @command: the usbip request type

From: Alan Stern stern@rowland.harvard.edu

commit c2b71462d294cf517a0bc6e4fd6424d7cee5596f upstream.

The syzkaller fuzzer reported a bug in the USB hub driver which turned out to be caused by a negative runtime-PM usage counter. This allowed a hub to be runtime suspended at a time when the driver did not expect it. The symptom is a WARNING issued because the hub's status URB is submitted while it is already active:

URB 0000000031fb463e submitted while active WARNING: CPU: 0 PID: 2917 at drivers/usb/core/urb.c:363

The negative runtime-PM usage count was caused by an unfortunate design decision made when runtime PM was first implemented for USB. At that time, USB class drivers were allowed to unbind from their interfaces without balancing the usage counter (i.e., leaving it with a positive count). The core code would take care of setting the counter back to 0 before allowing another driver to bind to the interface.

Later on when runtime PM was implemented for the entire kernel, the opposite decision was made: Drivers were required to balance their runtime-PM get and put calls. In order to maintain backward compatibility, however, the USB subsystem adapted to the new implementation by keeping an independent usage counter for each interface and using it to automatically adjust the normal usage counter back to 0 whenever a driver was unbound.

This approach involves duplicating information, but what is worse, it doesn't work properly in cases where a USB class driver delays decrementing the usage counter until after the driver's disconnect() routine has returned and the counter has been adjusted back to 0. Doing so would cause the usage counter to become negative. There's even a warning about this in the USB power management documentation!

As it happens, this is exactly what the hub driver does. The kick_hub_wq() routine increments the runtime-PM usage counter, and the corresponding decrement is carried out by hub_event() in the context of the hub_wq work-queue thread. This work routine may sometimes run after the driver has been unbound from its interface, and when it does it causes the usage counter to go negative.

It is not possible for hub_disconnect() to wait for a pending hub_event() call to finish, because hub_disconnect() is called with the device lock held and hub_event() acquires that lock. The only feasible fix is to reverse the original design decision: remove the duplicate interface-specific usage counter and require USB drivers to balance their runtime PM gets and puts. As far as I know, all existing drivers currently do this.

Signed-off-by: Alan Stern stern@rowland.harvard.edu Reported-and-tested-by: syzbot+7634edaea4d0b341c625@syzkaller.appspotmail.com CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- Documentation/driver-api/usb/power-management.rst | 14 +++++++++----- drivers/usb/core/driver.c | 13 ------------- drivers/usb/storage/realtek_cr.c | 13 +++++-------- include/linux/usb.h | 2 -- 4 files changed, 14 insertions(+), 28 deletions(-)

--- a/Documentation/driver-api/usb/power-management.rst +++ b/Documentation/driver-api/usb/power-management.rst @@ -370,11 +370,15 @@ autosuspend the interface's device. Whe then the interface is considered to be idle, and the kernel may autosuspend the device.

-Drivers need not be concerned about balancing changes to the usage -counter; the USB core will undo any remaining "get"s when a driver -is unbound from its interface. As a corollary, drivers must not call -any of the ``usb_autopm_*`` functions after their ``disconnect`` -routine has returned. +Drivers must be careful to balance their overall changes to the usage +counter. Unbalanced "get"s will remain in effect when a driver is +unbound from its interface, preventing the device from going into +runtime suspend should the interface be bound to a driver again. On +the other hand, drivers are allowed to achieve this balance by calling +the ``usb_autopm_*`` functions even after their ``disconnect`` routine +has returned -- say from within a work-queue routine -- provided they +retain an active reference to the interface (via ``usb_get_intf`` and +``usb_put_intf``).

Drivers using the async routines are responsible for their own synchronization and mutual exclusion. --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -473,11 +473,6 @@ static int usb_unbind_interface(struct d pm_runtime_disable(dev); pm_runtime_set_suspended(dev);

- /* Undo any residual pm_autopm_get_interface_* calls */ - for (r = atomic_read(&intf->pm_usage_cnt); r > 0; --r) - usb_autopm_put_interface_no_suspend(intf); - atomic_set(&intf->pm_usage_cnt, 0); - if (!error) usb_autosuspend_device(udev);

@@ -1636,7 +1631,6 @@ void usb_autopm_put_interface(struct usb int status;

usb_mark_last_busy(udev); - atomic_dec(&intf->pm_usage_cnt); status = pm_runtime_put_sync(&intf->dev); dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", __func__, atomic_read(&intf->dev.power.usage_count), @@ -1665,7 +1659,6 @@ void usb_autopm_put_interface_async(stru int status;

usb_mark_last_busy(udev); - atomic_dec(&intf->pm_usage_cnt); status = pm_runtime_put(&intf->dev); dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", __func__, atomic_read(&intf->dev.power.usage_count), @@ -1687,7 +1680,6 @@ void usb_autopm_put_interface_no_suspend struct usb_device *udev = interface_to_usbdev(intf);

usb_mark_last_busy(udev); - atomic_dec(&intf->pm_usage_cnt); pm_runtime_put_noidle(&intf->dev); } EXPORT_SYMBOL_GPL(usb_autopm_put_interface_no_suspend); @@ -1718,8 +1710,6 @@ int usb_autopm_get_interface(struct usb_ status = pm_runtime_get_sync(&intf->dev); if (status < 0) pm_runtime_put_sync(&intf->dev); - else - atomic_inc(&intf->pm_usage_cnt); dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", __func__, atomic_read(&intf->dev.power.usage_count), status); @@ -1753,8 +1743,6 @@ int usb_autopm_get_interface_async(struc status = pm_runtime_get(&intf->dev); if (status < 0 && status != -EINPROGRESS) pm_runtime_put_noidle(&intf->dev); - else - atomic_inc(&intf->pm_usage_cnt); dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", __func__, atomic_read(&intf->dev.power.usage_count), status); @@ -1778,7 +1766,6 @@ void usb_autopm_get_interface_no_resume( struct usb_device *udev = interface_to_usbdev(intf);

usb_mark_last_busy(udev); - atomic_inc(&intf->pm_usage_cnt); pm_runtime_get_noresume(&intf->dev); } EXPORT_SYMBOL_GPL(usb_autopm_get_interface_no_resume); --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -763,18 +763,16 @@ static void rts51x_suspend_timer_fn(stru break; case RTS51X_STAT_IDLE: case RTS51X_STAT_SS: - usb_stor_dbg(us, "RTS51X_STAT_SS, intf->pm_usage_cnt:%d, power.usage:%d\n", - atomic_read(&us->pusb_intf->pm_usage_cnt), + usb_stor_dbg(us, "RTS51X_STAT_SS, power.usage:%d\n", atomic_read(&us->pusb_intf->dev.power.usage_count));

- if (atomic_read(&us->pusb_intf->pm_usage_cnt) > 0) { + if (atomic_read(&us->pusb_intf->dev.power.usage_count) > 0) { usb_stor_dbg(us, "Ready to enter SS state\n"); rts51x_set_stat(chip, RTS51X_STAT_SS); /* ignore mass storage interface's children */ pm_suspend_ignore_children(&us->pusb_intf->dev, true); usb_autopm_put_interface_async(us->pusb_intf); - usb_stor_dbg(us, "RTS51X_STAT_SS 01, intf->pm_usage_cnt:%d, power.usage:%d\n", - atomic_read(&us->pusb_intf->pm_usage_cnt), + usb_stor_dbg(us, "RTS51X_STAT_SS 01, power.usage:%d\n", atomic_read(&us->pusb_intf->dev.power.usage_count)); } break; @@ -807,11 +805,10 @@ static void rts51x_invoke_transport(stru int ret;

if (working_scsi(srb)) { - usb_stor_dbg(us, "working scsi, intf->pm_usage_cnt:%d, power.usage:%d\n", - atomic_read(&us->pusb_intf->pm_usage_cnt), + usb_stor_dbg(us, "working scsi, power.usage:%d\n", atomic_read(&us->pusb_intf->dev.power.usage_count));

- if (atomic_read(&us->pusb_intf->pm_usage_cnt) <= 0) { + if (atomic_read(&us->pusb_intf->dev.power.usage_count) <= 0) { ret = usb_autopm_get_interface(us->pusb_intf); usb_stor_dbg(us, "working scsi, ret=%d\n", ret); } --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -200,7 +200,6 @@ usb_find_last_int_out_endpoint(struct us * @dev: driver model's view of this device * @usb_dev: if an interface is bound to the USB major, this will point * to the sysfs representation for that device. - * @pm_usage_cnt: PM usage counter for this interface * @reset_ws: Used for scheduling resets from atomic context. * @resetting_device: USB core reset the device, so use alt setting 0 as * current; needs bandwidth alloc after reset. @@ -257,7 +256,6 @@ struct usb_interface {

struct device dev; /* interface specific device info */ struct device *usb_dev; - atomic_t pm_usage_cnt; /* usage counter for autosuspend */ struct work_struct reset_ws; /* for resets in atomic context */ }; #define to_usb_interface(d) container_of(d, struct usb_interface, dev)

[ Upstream commit ef1491e791308317bb9851a0ad380c4a68b58d54 ]

The following commit:

9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler")

converted 'efi_rts_work' from an auto variable to a global variable. However, when submitting the work, INIT_WORK_ONSTACK() was still used, causing the following complaint from debugobjects:

ODEBUG: object 00000000ed27b500 is NOT on stack 00000000c7d38760, but annotated.

Change the macro to just INIT_WORK() to eliminate the warning.

Signed-off-by: Waiman Long longman@redhat.com Signed-off-by: Ard Biesheuvel ard.biesheuvel@linaro.org Acked-by: Sai Praneeth Prakhya sai.praneeth.prakhya@intel.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: linux-efi@vger.kernel.org Fixes: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler") Link: http://lkml.kernel.org/r/20181114175544.12860-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/efi/runtime-wrappers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c index b0aeffd4e269..1606abead22c 100644 --- a/drivers/firmware/efi/runtime-wrappers.c +++ b/drivers/firmware/efi/runtime-wrappers.c @@ -95,7 +95,7 @@ struct efi_runtime_work { efi_rts_work.status = EFI_ABORTED; \ \ init_completion(&efi_rts_work.efi_rts_comp); \ - INIT_WORK_ONSTACK(&efi_rts_work.work, efi_call_rts); \ + INIT_WORK(&efi_rts_work.work, efi_call_rts); \ efi_rts_work.arg1 = _arg1; \ efi_rts_work.arg2 = _arg2; \ efi_rts_work.arg3 = _arg3; \

[ Upstream commit 6c44b15e1c9076d925d5236ddadf1318b0a25ce2 ]

create_singlethread_workqueue may fail and return NULL. The fix checks if it is NULL to avoid NULL pointer dereference. Also, the fix moves the call of create_singlethread_workqueue earlier to avoid resource-release issues.

Signed-off-by: Kangjie Lu kjlu@umn.edu Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-logitech-hidpp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index 19cc980eebce..8425d3548a41 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -1907,6 +1907,13 @@ static int hidpp_ff_init(struct hidpp_device *hidpp, u8 feature_index) kfree(data); return -ENOMEM; } + data->wq = create_singlethread_workqueue("hidpp-ff-sendqueue"); + if (!data->wq) { + kfree(data->effect_ids); + kfree(data); + return -ENOMEM; + } + data->hidpp = hidpp; data->feature_index = feature_index; data->version = version; @@ -1951,7 +1958,6 @@ static int hidpp_ff_init(struct hidpp_device *hidpp, u8 feature_index) /* ignore boost value at response.fap.params[2] */

/* init the hardware command queue */ - data->wq = create_singlethread_workqueue("hidpp-ff-sendqueue"); atomic_set(&data->workqueue_size, 0);

/* initialize with zero autocenter to get wheel in usable state */

[ Upstream commit d6752e185c3168771787a02dc6a55f32260943cc ]

If we encounter a failure during suspend where this RTC was programmed to wakeup the system from suspend, but that wakeup couldn't be configured because the system didn't support wakeup interrupts, we'll run into the following warning:

Unbalanced IRQ 166 wake disable WARNING: CPU: 7 PID: 3071 at kernel/irq/manage.c:669 irq_set_irq_wake+0x108/0x278

This happens because the suspend process isn't aborted when the RTC fails to configure the wakeup IRQ. Instead, we continue suspending the system and then another suspend callback fails the suspend process and "unwinds" the previously suspended drivers by calling their resume callbacks. When we get back to resuming this RTC driver, we'll call disable_irq_wake() on an IRQ that hasn't been configured for wake.

Let's just fail suspend/resume here if we can't configure the system to wake and the user has chosen to wakeup with this device. This fixes this warning and makes the code more robust in case there are systems out there that can't wakeup from suspend on this line but the user has chosen to do so.

Cc: Enric Balletbo i Serra enric.balletbo@collabora.com Cc: Evan Green evgreen@chromium.org Cc: Benson Leung bleung@chromium.org Cc: Guenter Roeck groeck@chromium.org Signed-off-by: Stephen Boyd swboyd@chromium.org Acked-By: Benson Leung bleung@chromium.org Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/rtc/rtc-cros-ec.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-cros-ec.c b/drivers/rtc/rtc-cros-ec.c index e5444296075e..4d6bf9304ceb 100644 --- a/drivers/rtc/rtc-cros-ec.c +++ b/drivers/rtc/rtc-cros-ec.c @@ -298,7 +298,7 @@ static int cros_ec_rtc_suspend(struct device *dev) struct cros_ec_rtc *cros_ec_rtc = dev_get_drvdata(&pdev->dev);

if (device_may_wakeup(dev)) - enable_irq_wake(cros_ec_rtc->cros_ec->irq); + return enable_irq_wake(cros_ec_rtc->cros_ec->irq);

return 0; } @@ -309,7 +309,7 @@ static int cros_ec_rtc_resume(struct device *dev) struct cros_ec_rtc *cros_ec_rtc = dev_get_drvdata(&pdev->dev);

if (device_may_wakeup(dev)) - disable_irq_wake(cros_ec_rtc->cros_ec->irq); + return disable_irq_wake(cros_ec_rtc->cros_ec->irq);

return 0; }

[ Upstream commit 4ba104f468bbfc27362c393815d03aa18fb7a20f ]

The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle.

The batadv_bla_del_claim is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced.

Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as:

refcount_t: underflow; use-after-free.

Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de Signed-off-by: Sasha Levin sashal@kernel.org --- net/batman-adv/bridge_loop_avoidance.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index 5f1aeeded0e3..85faf25c2912 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -803,6 +803,8 @@ static void batadv_bla_del_claim(struct batadv_priv *bat_priv, const u8 *mac, const unsigned short vid) { struct batadv_bla_claim search_claim, *claim; + struct batadv_bla_claim *claim_removed_entry; + struct hlist_node *claim_removed_node;

ether_addr_copy(search_claim.addr, mac); search_claim.vid = vid; @@ -813,10 +815,18 @@ static void batadv_bla_del_claim(struct batadv_priv *bat_priv, batadv_dbg(BATADV_DBG_BLA, bat_priv, "%s(): %pM, vid %d\n", __func__, mac, batadv_print_vid(vid));

- batadv_hash_remove(bat_priv->bla.claim_hash, batadv_compare_claim, - batadv_choose_claim, claim); - batadv_claim_put(claim); /* reference from the hash is gone */ + claim_removed_node = batadv_hash_remove(bat_priv->bla.claim_hash, + batadv_compare_claim, + batadv_choose_claim, claim); + if (!claim_removed_node) + goto free_claim;

+ /* reference from the hash is gone */ + claim_removed_entry = hlist_entry(claim_removed_node, + struct batadv_bla_claim, hash_entry); + batadv_claim_put(claim_removed_entry); + +free_claim: /* don't need the reference from hash_find() anymore */ batadv_claim_put(claim); }

[ Upstream commit f131a56880d10932931e74773fb8702894a94a75 ]

The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle.

The batadv_tt_global_free is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced.

Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as:

refcount_t: underflow; use-after-free.

Fixes: 7683fdc1e886 ("batman-adv: protect the local and the global trans-tables with rcu") Reported-by: Martin Weinelt martin@linuxlounge.net Signed-off-by: Sven Eckelmann sven@narfation.org Acked-by: Antonio Quartulli a@unstable.cc Signed-off-by: Simon Wunderlich sw@simonwunderlich.de Signed-off-by: Sasha Levin sashal@kernel.org --- net/batman-adv/translation-table.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 696e6ddc534b..359ec1a6e822 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -616,14 +616,26 @@ static void batadv_tt_global_free(struct batadv_priv *bat_priv, struct batadv_tt_global_entry *tt_global, const char *message) { + struct batadv_tt_global_entry *tt_removed_entry; + struct hlist_node *tt_removed_node; + batadv_dbg(BATADV_DBG_TT, bat_priv, "Deleting global tt entry %pM (vid: %d): %s\n", tt_global->common.addr, batadv_print_vid(tt_global->common.vid), message);

- batadv_hash_remove(bat_priv->tt.global_hash, batadv_compare_tt, - batadv_choose_tt, &tt_global->common); - batadv_tt_global_entry_put(tt_global); + tt_removed_node = batadv_hash_remove(bat_priv->tt.global_hash, + batadv_compare_tt, + batadv_choose_tt, + &tt_global->common); + if (!tt_removed_node) + return; + + /* drop reference of remove hash entry */ + tt_removed_entry = hlist_entry(tt_removed_node, + struct batadv_tt_global_entry, + common.hash_entry); + batadv_tt_global_entry_put(tt_removed_entry); }

/**

[ Upstream commit d040e4e8deeaa8257d6aa260e29ad69832b5d630 ]

The device tree compiler yells like this: Warning (unit_address_vs_reg): /gpu-opp-table/opp@100000000: node has a unit name, but no reg property

Let's match the cpu opp node names and use a dash.

Signed-off-by: Douglas Anderson dianders@chromium.org Reviewed-by: Matthias Kaehlcke mka@chromium.org Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/rk3288.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index e6a36a792bae..c706adf4aed2 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -1261,27 +1261,27 @@ gpu_opp_table: gpu-opp-table { compatible = "operating-points-v2";

- opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <950000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <950000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <1000000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1100000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <1200000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1250000>; };

[ Upstream commit dabb8338be533c18f50255cf39ff4f66d4dabdbe ]

The runtime_suspend device callbacks are not supposed to save configuration state or change the power state. Commit fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") changed the driver to not save configuration state during runtime suspend, however the driver callback still put the device into a low-power state. This causes a warning in the pci pm core and results in pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend.

Fix this by not changing the power state either, leaving that to pci pm core, and make the same change for suspend callback as well.

Also move a couple of defines into the appropriate header file instead of inline in the .c file.

Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") Signed-off-by: Arvind Sankar niveditas98@gmail.com Reviewed-by: Kai-Heng Feng kai.heng.feng@canonical.com Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/intel/igb/e1000_defines.h | 2 + drivers/net/ethernet/intel/igb/igb_main.c | 57 +++---------------- 2 files changed, 10 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index 8a28f3388f69..dca671591ef6 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -194,6 +194,8 @@ /* enable link status from external LINK_0 and LINK_1 pins */ #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ +#define E1000_CTRL_ADVD3WUC 0x00100000 /* D3 WUC */ +#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 /* PHY PM enable */ #define E1000_CTRL_SDP0_DIR 0x00400000 /* SDP0 Data direction */ #define E1000_CTRL_SDP1_DIR 0x00800000 /* SDP1 Data direction */ #define E1000_CTRL_RST 0x04000000 /* Global reset */ diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index ffaa6e031632..aa39a068858e 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -8754,9 +8754,7 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake, struct e1000_hw *hw = &adapter->hw; u32 ctrl, rctl, status; u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol; -#ifdef CONFIG_PM - int retval = 0; -#endif + bool wake;

rtnl_lock(); netif_device_detach(netdev); @@ -8769,14 +8767,6 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake, igb_clear_interrupt_scheme(adapter); rtnl_unlock();

-#ifdef CONFIG_PM - if (!runtime) { - retval = pci_save_state(pdev); - if (retval) - return retval; - } -#endif - status = rd32(E1000_STATUS); if (status & E1000_STATUS_LU) wufc &= ~E1000_WUFC_LNKC; @@ -8793,10 +8783,6 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake, }

ctrl = rd32(E1000_CTRL); - /* advertise wake from D3Cold */ - #define E1000_CTRL_ADVD3WUC 0x00100000 - /* phy power management enable */ - #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 ctrl |= E1000_CTRL_ADVD3WUC; wr32(E1000_CTRL, ctrl);

@@ -8810,12 +8796,15 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake, wr32(E1000_WUFC, 0); }

- *enable_wake = wufc || adapter->en_mng_pt; - if (!*enable_wake) + wake = wufc || adapter->en_mng_pt; + if (!wake) igb_power_down_link(adapter); else igb_power_up_link(adapter);

+ if (enable_wake) + *enable_wake = wake; + /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ @@ -8858,22 +8847,7 @@ static void igb_deliver_wake_packet(struct net_device *netdev)

static int __maybe_unused igb_suspend(struct device *dev) { - int retval; - bool wake; - struct pci_dev *pdev = to_pci_dev(dev); - - retval = __igb_shutdown(pdev, &wake, 0); - if (retval) - return retval; - - if (wake) { - pci_prepare_to_sleep(pdev); - } else { - pci_wake_from_d3(pdev, false); - pci_set_power_state(pdev, PCI_D3hot); - } - - return 0; + return __igb_shutdown(to_pci_dev(dev), NULL, 0); }

static int __maybe_unused igb_resume(struct device *dev) @@ -8944,22 +8918,7 @@ static int __maybe_unused igb_runtime_idle(struct device *dev)

static int __maybe_unused igb_runtime_suspend(struct device *dev) { - struct pci_dev *pdev = to_pci_dev(dev); - int retval; - bool wake; - - retval = __igb_shutdown(pdev, &wake, 1); - if (retval) - return retval; - - if (wake) { - pci_prepare_to_sleep(pdev); - } else { - pci_wake_from_d3(pdev, false); - pci_set_power_state(pdev, PCI_D3hot); - } - - return 0; + return __igb_shutdown(to_pci_dev(dev), NULL, 1); }

static int __maybe_unused igb_runtime_resume(struct device *dev)

[ Upstream commit 2bafa1e9625400bec4c840a168d70ba52607a58d ]

Similar to commit edfc3722cfef ("HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not working"), the Lenovo Miix 630 has a combo keyboard/touchpad device with vid:pid of 04F3:0400, which is shared with Elan touchpads. The combo on the Miix 630 has an ACPI id of QTEC0001, which is not claimed by the elan_i2c driver, so key on that similar to what was done for the Toshiba Click Mini.

Signed-off-by: Jeffrey Hugo jeffrey.l.hugo@gmail.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-quirks.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 94088c0ed68a..e24790c988c0 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -744,7 +744,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DEALEXTREAME, USB_DEVICE_ID_DEALEXTREAME_RADIO_SI4701) }, { HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) }, { HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) }, - { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, 0x0400) }, { HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) }, { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) }, { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) }, @@ -1025,6 +1024,10 @@ bool hid_ignore(struct hid_device *hdev) if (hdev->product == 0x0401 && strncmp(hdev->name, "ELAN0800", 8) != 0) return true; + /* Same with product id 0x0400 */ + if (hdev->product == 0x0400 && + strncmp(hdev->name, "QTEC0001", 8) != 0) + return true; break; }

[ Upstream commit eca4a928585ac08147e5cc8e2111ecbc6279ee31 ]

Traditionally, the PF (Physical Function) which resides on vport 0 was the E-switch manager. Since the ECPF (Embedded CPU Physical Function), which resides on vport 0xfffe, was introduced as the E-Switch manager, the assumption that the E-switch manager is on vport 0 is incorrect.

Since the eswitch code already uses the actual vport value, all we need is to always set other_vport=1.

Signed-off-by: Omri Kahalon omrik@mellanox.com Reviewed-by: Max Gurtovoy maxg@mellanox.com Signed-off-by: Saeed Mahameed saeedm@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index 26c9f9421901..55ccd90beeb0 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -80,8 +80,7 @@ static int arm_vport_context_events_cmd(struct mlx5_core_dev *dev, u16 vport, opcode, MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT); MLX5_SET(modify_nic_vport_context_in, in, field_select.change_event, 1); MLX5_SET(modify_nic_vport_context_in, in, vport_number, vport); - if (vport) - MLX5_SET(modify_nic_vport_context_in, in, other_vport, 1); + MLX5_SET(modify_nic_vport_context_in, in, other_vport, 1); nic_vport_ctx = MLX5_ADDR_OF(modify_nic_vport_context_in, in, nic_vport_context);

@@ -109,8 +108,7 @@ static int modify_esw_vport_context_cmd(struct mlx5_core_dev *dev, u16 vport, MLX5_SET(modify_esw_vport_context_in, in, opcode, MLX5_CMD_OP_MODIFY_ESW_VPORT_CONTEXT); MLX5_SET(modify_esw_vport_context_in, in, vport_number, vport); - if (vport) - MLX5_SET(modify_esw_vport_context_in, in, other_vport, 1); + MLX5_SET(modify_esw_vport_context_in, in, other_vport, 1); return mlx5_cmd_exec(dev, in, inlen, out, sizeof(out)); }

[ Upstream commit 583e6361414903c5206258a30e5bd88cb03c0254 ]

We always program the maximum DMA buffer size into the receive descriptor, although the allocated size may be less. E.g. with the default MTU size we allocate only 1536 bytes. If somebody sends us a bigger frame, then memory may get corrupted.

Fix by using exact buffer sizes.

Signed-off-by: Aaro Koskinen aaro.koskinen@nokia.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/stmicro/stmmac/descs_com.h | 22 ++++++++++++------- .../ethernet/stmicro/stmmac/dwmac4_descs.c | 2 +- .../ethernet/stmicro/stmmac/dwxgmac2_descs.c | 2 +- .../net/ethernet/stmicro/stmmac/enh_desc.c | 10 ++++++--- drivers/net/ethernet/stmicro/stmmac/hwif.h | 2 +- .../net/ethernet/stmicro/stmmac/norm_desc.c | 10 ++++++--- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++-- 7 files changed, 35 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/descs_com.h b/drivers/net/ethernet/stmicro/stmmac/descs_com.h index 40d6356a7e73..3dfb07a78952 100644 --- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h +++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h @@ -29,11 +29,13 @@ /* Specific functions used for Ring mode */

/* Enhanced descriptors */ -static inline void ehn_desc_rx_set_on_ring(struct dma_desc *p, int end) +static inline void ehn_desc_rx_set_on_ring(struct dma_desc *p, int end, + int bfsize) { - p->des1 |= cpu_to_le32((BUF_SIZE_8KiB - << ERDES1_BUFFER2_SIZE_SHIFT) - & ERDES1_BUFFER2_SIZE_MASK); + if (bfsize == BUF_SIZE_16KiB) + p->des1 |= cpu_to_le32((BUF_SIZE_8KiB + << ERDES1_BUFFER2_SIZE_SHIFT) + & ERDES1_BUFFER2_SIZE_MASK);

if (end) p->des1 |= cpu_to_le32(ERDES1_END_RING); @@ -59,11 +61,15 @@ static inline void enh_set_tx_desc_len_on_ring(struct dma_desc *p, int len) }

/* Normal descriptors */ -static inline void ndesc_rx_set_on_ring(struct dma_desc *p, int end) +static inline void ndesc_rx_set_on_ring(struct dma_desc *p, int end, int bfsize) { - p->des1 |= cpu_to_le32(((BUF_SIZE_2KiB - 1) - << RDES1_BUFFER2_SIZE_SHIFT) - & RDES1_BUFFER2_SIZE_MASK); + if (bfsize >= BUF_SIZE_2KiB) { + int bfsize2; + + bfsize2 = min(bfsize - BUF_SIZE_2KiB + 1, BUF_SIZE_2KiB - 1); + p->des1 |= cpu_to_le32((bfsize2 << RDES1_BUFFER2_SIZE_SHIFT) + & RDES1_BUFFER2_SIZE_MASK); + }

if (end) p->des1 |= cpu_to_le32(RDES1_END_RING); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c index 736e29635b77..313a58b68fee 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c @@ -296,7 +296,7 @@ static int dwmac4_wrback_get_rx_timestamp_status(void *desc, void *next_desc, }

static void dwmac4_rd_init_rx_desc(struct dma_desc *p, int disable_rx_ic, - int mode, int end) + int mode, int end, int bfsize) { dwmac4_set_rx_owner(p, disable_rx_ic); } diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c index 1d858fdec997..98fa471da7c0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c @@ -123,7 +123,7 @@ static int dwxgmac2_get_rx_timestamp_status(void *desc, void *next_desc, }

static void dwxgmac2_init_rx_desc(struct dma_desc *p, int disable_rx_ic, - int mode, int end) + int mode, int end, int bfsize) { dwxgmac2_set_rx_owner(p, disable_rx_ic); } diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c index 5ef91a790f9d..e8855e6adb48 100644 --- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c @@ -259,15 +259,19 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x, }

static void enh_desc_init_rx_desc(struct dma_desc *p, int disable_rx_ic, - int mode, int end) + int mode, int end, int bfsize) { + int bfsize1; + p->des0 |= cpu_to_le32(RDES0_OWN); - p->des1 |= cpu_to_le32(BUF_SIZE_8KiB & ERDES1_BUFFER1_SIZE_MASK); + + bfsize1 = min(bfsize, BUF_SIZE_8KiB); + p->des1 |= cpu_to_le32(bfsize1 & ERDES1_BUFFER1_SIZE_MASK);

if (mode == STMMAC_CHAIN_MODE) ehn_desc_rx_set_on_chain(p); else - ehn_desc_rx_set_on_ring(p, end); + ehn_desc_rx_set_on_ring(p, end, bfsize);

if (disable_rx_ic) p->des1 |= cpu_to_le32(ERDES1_DISABLE_IC); diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h index 92b8944f26e3..5bb00234d961 100644 --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h @@ -33,7 +33,7 @@ struct dma_extended_desc; struct stmmac_desc_ops { /* DMA RX descriptor ring initialization */ void (*init_rx_desc)(struct dma_desc *p, int disable_rx_ic, int mode, - int end); + int end, int bfsize); /* DMA TX descriptor ring initialization */ void (*init_tx_desc)(struct dma_desc *p, int mode, int end); /* Invoked by the xmit function to prepare the tx descriptor */ diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c index de65bb29feba..c55a9815b394 100644 --- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c @@ -135,15 +135,19 @@ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x, }

static void ndesc_init_rx_desc(struct dma_desc *p, int disable_rx_ic, int mode, - int end) + int end, int bfsize) { + int bfsize1; + p->des0 |= cpu_to_le32(RDES0_OWN); - p->des1 |= cpu_to_le32((BUF_SIZE_2KiB - 1) & RDES1_BUFFER1_SIZE_MASK); + + bfsize1 = min(bfsize, BUF_SIZE_2KiB - 1); + p->des1 |= cpu_to_le32(bfsize & RDES1_BUFFER1_SIZE_MASK);

if (mode == STMMAC_CHAIN_MODE) ndesc_rx_set_on_chain(p, end); else - ndesc_rx_set_on_ring(p, end); + ndesc_rx_set_on_ring(p, end, bfsize);

if (disable_rx_ic) p->des1 |= cpu_to_le32(RDES1_DISABLE_IC); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 39c105092214..b44ca0c90c5c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1111,11 +1111,13 @@ static void stmmac_clear_rx_descriptors(struct stmmac_priv *priv, u32 queue) if (priv->extend_desc) stmmac_init_rx_desc(priv, &rx_q->dma_erx[i].basic, priv->use_riwt, priv->mode, - (i == DMA_RX_SIZE - 1)); + (i == DMA_RX_SIZE - 1), + priv->dma_buf_sz); else stmmac_init_rx_desc(priv, &rx_q->dma_rx[i], priv->use_riwt, priv->mode, - (i == DMA_RX_SIZE - 1)); + (i == DMA_RX_SIZE - 1), + priv->dma_buf_sz); }

/**

[ Upstream commit 07b3975352374c3f5ebb4a42ef0b253fe370542d ]

Currently, if we drop a packet, we exit from NAPI loop before the budget is consumed. In some situations this will make the RX processing stall e.g. when flood pinging the system with oversized packets, as the errorneous packets are not dropped efficiently.

If we drop a packet, we should just continue to the next one as long as the budget allows.

Signed-off-by: Aaro Koskinen aaro.koskinen@nokia.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index bacc2fd63bfc..5debe93ea4eb 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3333,9 +3333,8 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue) { struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue]; struct stmmac_channel *ch = &priv->channel[queue]; - unsigned int entry = rx_q->cur_rx; + unsigned int next_entry = rx_q->cur_rx; int coe = priv->hw->rx_csum; - unsigned int next_entry; unsigned int count = 0; bool xmac;

@@ -3353,10 +3352,12 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue) stmmac_display_ring(priv, rx_head, DMA_RX_SIZE, true); } while (count < limit) { - int status; + int entry, status; struct dma_desc *p; struct dma_desc *np;

+ entry = next_entry; + if (priv->extend_desc) p = (struct dma_desc *)(rx_q->dma_erx + entry); else @@ -3417,7 +3418,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue) "len %d larger than size (%d)\n", frame_len, priv->dma_buf_sz); priv->dev->stats.rx_length_errors++; - break; + continue; }

/* ACS is set; GMAC core strips PAD/FCS for IEEE 802.3 @@ -3452,7 +3453,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue) dev_warn(priv->device, "packet dropped\n"); priv->dev->stats.rx_dropped++; - break; + continue; }

dma_sync_single_for_cpu(priv->device, @@ -3477,7 +3478,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue) "%s: Inconsistent Rx chain\n", priv->dev->name); priv->dev->stats.rx_dropped++; - break; + continue; } prefetch(skb->data - NET_IP_ALIGN); rx_q->rx_skbuff[entry] = NULL; @@ -3512,7 +3513,6 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue) priv->dev->stats.rx_packets++; priv->dev->stats.rx_bytes += frame_len; } - entry = next_entry; }

stmmac_rx_refill(priv, queue);

[ Upstream commit 8ac0c24fe1c256af6644caf3d311029440ec2fbd ]

Packets without the last descriptor set should be dropped early. If we receive a frame larger than the DMA buffer, the HW will continue using the next descriptor. Driver mistakes these as individual frames, and sometimes a truncated frame (without the LD set) may look like a valid packet.

This fixes a strange issue where the system replies to 4098-byte ping although the MTU/DMA buffer size is set to 4096, and yet at the same time it's logging an oversized packet.

Signed-off-by: Aaro Koskinen aaro.koskinen@nokia.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c index c42ef6c729c0..5202d6ad7919 100644 --- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c @@ -201,6 +201,11 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x, if (unlikely(rdes0 & RDES0_OWN)) return dma_own;

+ if (unlikely(!(rdes0 & RDES0_LAST_DESCRIPTOR))) { + stats->rx_length_errors++; + return discard_frame; + } + if (unlikely(rdes0 & RDES0_ERROR_SUMMARY)) { if (unlikely(rdes0 & RDES0_DESCRIPTOR_ERROR)) { x->rx_desc++;

[ Upstream commit 4fdcfab5b5537c21891e22e65996d4d0dd8ab4ca ]

free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory.

Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jffs2/readinode.c | 5 ----- fs/jffs2/super.c | 5 ++++- 2 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c index 389ea53ea487..bccfc40b3a74 100644 --- a/fs/jffs2/readinode.c +++ b/fs/jffs2/readinode.c @@ -1414,11 +1414,6 @@ void jffs2_do_clear_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f)

jffs2_kill_fragtree(&f->fragtree, deleted?c:NULL);

- if (f->target) { - kfree(f->target); - f->target = NULL; - } - fds = f->dents; while(fds) { fd = fds; diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c index bb6ae387469f..05d892c79339 100644 --- a/fs/jffs2/super.c +++ b/fs/jffs2/super.c @@ -47,7 +47,10 @@ static struct inode *jffs2_alloc_inode(struct super_block *sb) static void jffs2_i_callback(struct rcu_head *head) { struct inode *inode = container_of(head, struct inode, i_rcu); - kmem_cache_free(jffs2_inode_cachep, JFFS2_INODE_INFO(inode)); + struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode); + + kfree(f->target); + kmem_cache_free(jffs2_inode_cachep, f); }

static void jffs2_destroy_inode(struct inode *inode)

[ Upstream commit 20bb907f7dc82ecc9e135ad7067ac7eb69c81222 ]

Since commit 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend") on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get() in i2c-omap.c returns -EACCES.

[ 86.474365] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [ 86.485473] printk: Suspending console(s) (use no_console_suspend to debug) [ 86.555572] Disabling non-boot CPUs ... [ 86.555664] Successfully put all powerdomains to target state [ 86.563720] twl: Read failed (mod 1, reg 0x01 count 1) [ 86.563751] twl4030: I2C error -13 reading PIH ISR [ 86.563812] twl: Read failed (mod 1, reg 0x01 count 1) [ 86.563812] twl4030: I2C error -13 reading PIH ISR [ 86.563873] twl: Read failed (mod 1, reg 0x01 count 1) [ 86.563903] twl4030: I2C error -13 reading PIH ISR

This happens when we wakeup via something behing twl4030 (powerbutton or rtc alarm). This goes on for minutes until the system is finally resumed. Disable the irq on suspend and enable it on resume to avoid having i2c access problems when the irq registers are checked.

Fixes: 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend") Signed-off-by: Andreas Kemnade andreas@kemnade.info Tested-by: Tony Lindgren tony@atomide.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/twl-core.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)

diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 299016bc46d9..104477b512a2 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -1245,6 +1245,28 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) return status; }

+static int __maybe_unused twl_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (client->irq) + disable_irq(client->irq); + + return 0; +} + +static int __maybe_unused twl_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (client->irq) + enable_irq(client->irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(twl_dev_pm_ops, twl_suspend, twl_resume); + static const struct i2c_device_id twl_ids[] = { { "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */ { "twl5030", 0 }, /* T2 updated */ @@ -1262,6 +1284,7 @@ static const struct i2c_device_id twl_ids[] = { /* One Client Driver , 4 Clients */ static struct i2c_driver twl_driver = { .driver.name = DRIVER_NAME, + .driver.pm = &twl_dev_pm_ops, .id_table = twl_ids, .probe = twl_probe, .remove = twl_remove,

[ Upstream commit 882c5e552ffd06856de42261460f46e18319d259 ]

The DA9063AD doesn't support alarms on any seconds and its granularity is the minute. Set uie_unsupported in that case.

Reported-by: Wolfram Sang wsa+renesas@sang-engineering.com Reported-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Wolfram Sang wsa+renesas@sang-engineering.com Tested-by: Wolfram Sang wsa+renesas@sang-engineering.com Acked-by: Steve Twiss stwiss.opensource@diasemi.com Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/rtc/rtc-da9063.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c index b4e054c64bad..69b54e5556c0 100644 --- a/drivers/rtc/rtc-da9063.c +++ b/drivers/rtc/rtc-da9063.c @@ -480,6 +480,13 @@ static int da9063_rtc_probe(struct platform_device *pdev) da9063_data_to_tm(data, &rtc->alarm_time, rtc); rtc->rtc_sync = false;

+ /* + * TODO: some models have alarms on a minute boundary but still support + * real hardware interrupts. Add this once the core supports it. + */ + if (config->rtc_data_start != RTC_SEC) + rtc->rtc_dev->uie_unsupported = 1; + irq_alarm = platform_get_irq_byname(pdev, "ALARM"); ret = devm_request_threaded_irq(&pdev->dev, irq_alarm, NULL, da9063_alarm_event,

[ Upstream commit 426b046b748d1f47e096e05bdcc6fb4172791307 ]

When compiling with -Wformat, clang emits the following warnings:

drivers/vfio/pci/vfio_pci.c:1601:5: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~

drivers/vfio/pci/vfio_pci.c:1601:13: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~

drivers/vfio/pci/vfio_pci.c:1601:21: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~

drivers/vfio/pci/vfio_pci.c:1601:32: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~

drivers/vfio/pci/vfio_pci.c:1605:5: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~

drivers/vfio/pci/vfio_pci.c:1605:13: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~

drivers/vfio/pci/vfio_pci.c:1605:21: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~

drivers/vfio/pci/vfio_pci.c:1605:32: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct ones for unsigned ints.

Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Louis Taylor louis@kragniz.eu Reviewed-by: Nick Desaulniers ndesaulniers@google.com Signed-off-by: Alex Williamson alex.williamson@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vfio/pci/vfio_pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index cddb453a1ba5..6cf00d9f512b 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -1443,11 +1443,11 @@ static void __init vfio_pci_fill_ids(void) rc = pci_add_dynid(&vfio_pci_driver, vendor, device, subvendor, subdevice, class, class_mask, 0); if (rc) - pr_warn("failed to add dynamic id [%04hx:%04hx[%04hx:%04hx]] class %#08x/%08x (%d)\n", + pr_warn("failed to add dynamic id [%04x:%04x[%04x:%04x]] class %#08x/%08x (%d)\n", vendor, device, subvendor, subdevice, class, class_mask, rc); else - pr_info("add [%04hx:%04hx[%04hx:%04hx]] class %#08x/%08x\n", + pr_info("add [%04x:%04x[%04x:%04x]] class %#08x/%08x\n", vendor, device, subvendor, subdevice, class, class_mask); }

[ Upstream commit 382e06d11e075a40b4094b6ef809f8d4bcc7ab2a ]

When the number of sub-channels offered by Hyper-V is >= the number of CPUs in the VM, calculate the correct number of sub-channels. The current code produces one too many.

This scenario arises only when the number of CPUs is artificially restricted (for example, with maxcpus=<n> on the kernel boot line), because Hyper-V normally offers a sub-channel count < number of CPUs. While the current code doesn't break, the extra sub-channel is unbalanced across the CPUs (for example, a total of 5 channels on a VM with 4 CPUs).

Signed-off-by: Michael Kelley mikelley@microsoft.com Reviewed-by: Vitaly Kuznetsov vkuznets@redhat.com Reviewed-by: Long Li longli@microsoft.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/storvsc_drv.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index f03dc03a42c3..0c2ba075bc71 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -664,13 +664,22 @@ static void handle_sc_creation(struct vmbus_channel *new_sc) static void handle_multichannel_storage(struct hv_device *device, int max_chns) { struct storvsc_device *stor_device; - int num_cpus = num_online_cpus(); int num_sc; struct storvsc_cmd_request *request; struct vstor_packet *vstor_packet; int ret, t;

- num_sc = ((max_chns > num_cpus) ? num_cpus : max_chns); + /* + * If the number of CPUs is artificially restricted, such as + * with maxcpus=1 on the kernel boot line, Hyper-V could offer + * sub-channels >= the number of CPUs. These sub-channels + * should not be created. The primary channel is already created + * and assigned to one CPU, so check against # CPUs - 1. + */ + num_sc = min((int)(num_online_cpus() - 1), max_chns); + if (!num_sc) + return; + stor_device = get_out_stor_device(device); if (!stor_device) return;

[ Upstream commit 1c41860864c8ae0387ef7d44f0000e99cbb2e06d ]

When doing unwind_frame() in the context of pseudo nmi (need enable CONFIG_ARM64_PSEUDO_NMI), reaching the bottom of the stack (fp == 0, pc != 0), function on_sdei_stack() will return true while the sdei acpi table is not inited in fact. This will cause a "NULL pointer dereference" oops when going on.

Reviewed-by: Julien Thierry julien.thierry@arm.com Signed-off-by: Wei Li liwei391@huawei.com Signed-off-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kernel/sdei.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/kernel/sdei.c b/arch/arm64/kernel/sdei.c index 5ba4465e44f0..ea94cf8f9dc6 100644 --- a/arch/arm64/kernel/sdei.c +++ b/arch/arm64/kernel/sdei.c @@ -94,6 +94,9 @@ static bool on_sdei_normal_stack(unsigned long sp, struct stack_info *info) unsigned long low = (unsigned long)raw_cpu_read(sdei_stack_normal_ptr); unsigned long high = low + SDEI_STACK_SIZE;

+ if (!low) + return false; + if (sp < low || sp >= high) return false;

@@ -111,6 +114,9 @@ static bool on_sdei_critical_stack(unsigned long sp, struct stack_info *info) unsigned long low = (unsigned long)raw_cpu_read(sdei_stack_critical_ptr); unsigned long high = low + SDEI_STACK_SIZE;

+ if (!low) + return false; + if (sp < low || sp >= high) return false;

[ Upstream commit acb1ce15a61154aa501891d67ebf79bc9ea26818 ]

When the HNS driver loaded, always have an error print: "netif_napi_add() called with weight 256"

This is because the kernel checks the NAPI polling weights requested by drivers and it prints an error message if a driver requests a weight bigger than 64.

So use NAPI_POLL_WEIGHT to fix it.

Signed-off-by: Yonglong Liu liuyonglong@huawei.com Signed-off-by: Peng Li lipeng321@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c index 3a6e5cc76c5b..1c70f9aa0aa7 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c @@ -29,9 +29,6 @@

#define SERVICE_TIMER_HZ (1 * HZ)

-#define NIC_TX_CLEAN_MAX_NUM 256 -#define NIC_RX_CLEAN_MAX_NUM 64 - #define RCB_IRQ_NOT_INITED 0 #define RCB_IRQ_INITED 1 #define HNS_BUFFER_SIZE_2048 2048 @@ -2151,7 +2148,7 @@ static int hns_nic_init_ring_data(struct hns_nic_priv *priv) hns_nic_tx_fini_pro_v2;

netif_napi_add(priv->netdev, &rd->napi, - hns_nic_common_poll, NIC_TX_CLEAN_MAX_NUM); + hns_nic_common_poll, NAPI_POLL_WEIGHT); rd->ring->irq_init_flag = RCB_IRQ_NOT_INITED; } for (i = h->q_num; i < h->q_num * 2; i++) { @@ -2164,7 +2161,7 @@ static int hns_nic_init_ring_data(struct hns_nic_priv *priv) hns_nic_rx_fini_pro_v2;

netif_napi_add(priv->netdev, &rd->napi, - hns_nic_common_poll, NIC_RX_CLEAN_MAX_NUM); + hns_nic_common_poll, NAPI_POLL_WEIGHT); rd->ring->irq_init_flag = RCB_IRQ_NOT_INITED; }

[ Upstream commit f058e46855dcbc28edb2ed4736f38a71fd19cadb ]

ICMP6 neighbor solicitation messages will be discard by the Hip06 chips, because of not setting forwarding pool. Enable promisc mode has the same problem.

This patch fix the wrong forwarding table configs for the multicast vague matching when enable promisc mode, and add forwarding pool for the forwarding table.

Signed-off-by: Yonglong Liu liuyonglong@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../ethernet/hisilicon/hns/hns_dsaf_main.c | 33 +++++++++++++++---- 1 file changed, 27 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c index b8155f5e71b4..fdff5526d2e8 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c @@ -2750,6 +2750,17 @@ int hns_dsaf_get_regs_count(void) return DSAF_DUMP_REGS_NUM; }

+static int hns_dsaf_get_port_id(u8 port) +{ + if (port < DSAF_SERVICE_NW_NUM) + return port; + + if (port >= DSAF_BASE_INNER_PORT_NUM) + return port - DSAF_BASE_INNER_PORT_NUM + DSAF_SERVICE_NW_NUM; + + return -EINVAL; +} + static void set_promisc_tcam_enable(struct dsaf_device *dsaf_dev, u32 port) { struct dsaf_tbl_tcam_ucast_cfg tbl_tcam_ucast = {0, 1, 0, 0, 0x80}; @@ -2815,23 +2826,33 @@ static void set_promisc_tcam_enable(struct dsaf_device *dsaf_dev, u32 port) memset(&temp_key, 0x0, sizeof(temp_key)); mask_entry.addr[0] = 0x01; hns_dsaf_set_mac_key(dsaf_dev, &mask_key, mask_entry.in_vlan_id, - port, mask_entry.addr); + 0xf, mask_entry.addr); tbl_tcam_mcast.tbl_mcast_item_vld = 1; tbl_tcam_mcast.tbl_mcast_old_en = 0;

- if (port < DSAF_SERVICE_NW_NUM) { - mskid = port; - } else if (port >= DSAF_BASE_INNER_PORT_NUM) { - mskid = port - DSAF_BASE_INNER_PORT_NUM + DSAF_SERVICE_NW_NUM; - } else { + /* set MAC port to handle multicast */ + mskid = hns_dsaf_get_port_id(port); + if (mskid == -EINVAL) { dev_err(dsaf_dev->dev, "%s,pnum(%d)error,key(%#x:%#x)\n", dsaf_dev->ae_dev.name, port, mask_key.high.val, mask_key.low.val); return; } + dsaf_set_bit(tbl_tcam_mcast.tbl_mcast_port_msk[mskid / 32], + mskid % 32, 1);

+ /* set pool bit map to handle multicast */ + mskid = hns_dsaf_get_port_id(port_num); + if (mskid == -EINVAL) { + dev_err(dsaf_dev->dev, + "%s, pool bit map pnum(%d)error,key(%#x:%#x)\n", + dsaf_dev->ae_dev.name, port_num, + mask_key.high.val, mask_key.low.val); + return; + } dsaf_set_bit(tbl_tcam_mcast.tbl_mcast_port_msk[mskid / 32], mskid % 32, 1); + memcpy(&temp_key, &mask_key, sizeof(mask_key)); hns_dsaf_tcam_mc_cfg_vague(dsaf_dev, entry_index, &tbl_tcam_data_mc, (struct dsaf_tbl_tcam_data *)(&mask_key),

[ Upstream commit cc5a726c79158bd307150e8d4176ec79b52001ea ]

BITS_TO_LONGS() uses DIV_ROUND_UP() because of this ppmax value can be greater than available per cpu page pods.

This patch removes BITS_TO_LONGS() to fix this issue.

Signed-off-by: Varun Prakash varun@chelsio.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c b/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c index 74849be5f004..e2919005ead3 100644 --- a/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c +++ b/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c @@ -354,7 +354,10 @@ static struct cxgbi_ppm_pool *ppm_alloc_cpu_pool(unsigned int *total, ppmax = max;

/* pool size must be multiple of unsigned long */ - bmap = BITS_TO_LONGS(ppmax); + bmap = ppmax / BITS_PER_TYPE(unsigned long); + if (!bmap) + return NULL; + ppmax = (bmap * sizeof(unsigned long)) << 3;

alloc_sz = sizeof(*pools) + sizeof(unsigned long) * bmap; @@ -402,6 +405,10 @@ int cxgbi_ppm_init(void **ppm_pp, struct net_device *ndev, if (reserve_factor) { ppmax_pool = ppmax / reserve_factor; pool = ppm_alloc_cpu_pool(&ppmax_pool, &pool_index_max); + if (!pool) { + ppmax_pool = 0; + reserve_factor = 0; + }

pr_debug("%s: ppmax %u, cpu total %u, per cpu %u.\n", ndev->name, ppmax, ppmax_pool, pool_index_max);

[ Upstream commit 298a32b132087550d3fa80641ca58323c5dfd4d9 ]

Commit 2d4f567103ff ("KVM: PPC: Introduce kvm_tmp framework") adds kvm_tmp[] into the .bss section and then free the rest of unused spaces back to the page allocator.

kernel_init kvm_guest_init kvm_free_tmp free_reserved_area free_unref_page free_unref_page_prepare

With DEBUG_PAGEALLOC=y, it will unmap those pages from kernel. As the result, kmemleak scan will trigger a panic when it scans the .bss section with unmapped pages.

This patch creates dedicated kmemleak objects for the .data, .bss and potentially .data..ro_after_init sections to allow partial freeing via the kmemleak_free_part() in the powerpc kvm_free_tmp() function.

Link: http://lkml.kernel.org/r/20190321171917.62049-1-catalin.marinas@arm.com Signed-off-by: Catalin Marinas catalin.marinas@arm.com Reported-by: Qian Cai cai@lca.pw Acked-by: Michael Ellerman mpe@ellerman.id.au (powerpc) Tested-by: Qian Cai cai@lca.pw Cc: Paul Mackerras paulus@samba.org Cc: Benjamin Herrenschmidt benh@kernel.crashing.org Cc: Avi Kivity avi@redhat.com Cc: Paolo Bonzini pbonzini@redhat.com Cc: Radim Krcmar rkrcmar@redhat.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/kvm.c | 7 +++++++ mm/kmemleak.c | 16 +++++++++++----- 2 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c index 683b5b3805bd..cd381e2291df 100644 --- a/arch/powerpc/kernel/kvm.c +++ b/arch/powerpc/kernel/kvm.c @@ -22,6 +22,7 @@ #include <linux/kvm_host.h> #include <linux/init.h> #include <linux/export.h> +#include <linux/kmemleak.h> #include <linux/kvm_para.h> #include <linux/slab.h> #include <linux/of.h> @@ -712,6 +713,12 @@ static void kvm_use_magic_page(void)

static __init void kvm_free_tmp(void) { + /* + * Inform kmemleak about the hole in the .bss section since the + * corresponding pages will be unmapped with DEBUG_PAGEALLOC=y. + */ + kmemleak_free_part(&kvm_tmp[kvm_tmp_index], + ARRAY_SIZE(kvm_tmp) - kvm_tmp_index); free_reserved_area(&kvm_tmp[kvm_tmp_index], &kvm_tmp[ARRAY_SIZE(kvm_tmp)], -1, NULL); } diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 17dd883198ae..5912a26e041c 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1501,11 +1501,6 @@ static void kmemleak_scan(void) } rcu_read_unlock();

- /* data/bss scanning */ - scan_large_block(_sdata, _edata); - scan_large_block(__bss_start, __bss_stop); - scan_large_block(__start_ro_after_init, __end_ro_after_init); - #ifdef CONFIG_SMP /* per-cpu sections scanning */ for_each_possible_cpu(i) @@ -2036,6 +2031,17 @@ void __init kmemleak_init(void) } local_irq_restore(flags);

+ /* register the data/bss sections */ + create_object((unsigned long)_sdata, _edata - _sdata, + KMEMLEAK_GREY, GFP_ATOMIC); + create_object((unsigned long)__bss_start, __bss_stop - __bss_start, + KMEMLEAK_GREY, GFP_ATOMIC); + /* only register .data..ro_after_init if not within .data */ + if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata) + create_object((unsigned long)__start_ro_after_init, + __end_ro_after_init - __start_ro_after_init, + KMEMLEAK_GREY, GFP_ATOMIC); + /* * This is the point where tracking allocations is safe. Automatic * scanning is started during the late initcall. Add the early logged

[ Upstream commit acaf892ecbf5be7710ae05a61fd43c668f68ad95 ]

Many of the sh CPU-types have their own plat_irq_setup() and arch_init_clk_ops() functions, so these same (empty) functions in arch/sh/boards/of-generic.c are not needed and cause build errors.

If there is some case where these empty functions are needed, they can be retained by marking them as "__weak" while at the same time making builds that do not need them succeed.

Fixes these build errors:

arch/sh/boards/of-generic.o: In function `plat_irq_setup': (.init.text+0x134): multiple definition of `plat_irq_setup' arch/sh/kernel/cpu/sh2/setup-sh7619.o:(.init.text+0x30): first defined here arch/sh/boards/of-generic.o: In function `arch_init_clk_ops': (.init.text+0x118): multiple definition of `arch_init_clk_ops' arch/sh/kernel/cpu/sh2/clock-sh7619.o:(.init.text+0x0): first defined here

Link: http://lkml.kernel.org/r/9ee4e0c5-f100-86a2-bd4d-1d3287ceab31@infradead.org Signed-off-by: Randy Dunlap rdunlap@infradead.org Reported-by: kbuild test robot lkp@intel.com Cc: Takashi Iwai tiwai@suse.de Cc: Yoshinori Sato ysato@users.sourceforge.jp Cc: Rich Felker dalias@libc.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/sh/boards/of-generic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c index 26789ad28193..cb99df514a1c 100644 --- a/arch/sh/boards/of-generic.c +++ b/arch/sh/boards/of-generic.c @@ -175,10 +175,10 @@ static struct sh_machine_vector __initmv sh_of_generic_mv = {

struct sh_clk_ops;

-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx) +void __init __weak arch_init_clk_ops(struct sh_clk_ops **ops, int idx) { }

-void __init plat_irq_setup(void) +void __init __weak plat_irq_setup(void) { }

[ Upstream commit 10dce8af34226d90fa56746a934f8da5dcdba3df ]

Commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX") added locking for file.f_pos access and in particular made concurrent read and write not possible - now both those functions take f_pos lock for the whole run, and so if e.g. a read is blocked waiting for data, write will deadlock waiting for that read to complete.

This caused regression for stream-like files where previously read and write could run simultaneously, but after that patch could not do so anymore. See e.g. commit 581d21a2d02a ("xenbus: fix deadlock on writes to /proc/xen/xenbus") which fixes such regression for particular case of /proc/xen/xenbus.

The patch that added f_pos lock in 2014 did so to guarantee POSIX thread safety for read/write/lseek and added the locking to file descriptors of all regular files. In 2014 that thread-safety problem was not new as it was already discussed earlier in 2006.

However even though 2006'th version of Linus's patch was adding f_pos locking "only for files that are marked seekable with FMODE_LSEEK (thus avoiding the stream-like objects like pipes and sockets)", the 2014 version - the one that actually made it into the tree as 9c225f2655e3 - is doing so irregardless of whether a file is seekable or not.

See

https://lore.kernel.org/lkml/53022DB1.4070805@gmail.com/ https://lwn.net/Articles/180387 https://lwn.net/Articles/180396

for historic context.

The reason that it did so is, probably, that there are many files that are marked non-seekable, but e.g. their read implementation actually depends on knowing current position to correctly handle the read. Some examples:

kernel/power/user.c snapshot_read fs/debugfs/file.c u32_array_read fs/fuse/control.c fuse_conn_waiting_read + ... drivers/hwmon/asus_atk0110.c atk_debugfs_ggrp_read arch/s390/hypfs/inode.c hypfs_read_iter ...

Despite that, many nonseekable_open users implement read and write with pure stream semantics - they don't depend on passed ppos at all. And for those cases where read could wait for something inside, it creates a situation similar to xenbus - the write could be never made to go until read is done, and read is waiting for some, potentially external, event, for potentially unbounded time -> deadlock.

Besides xenbus, there are 14 such places in the kernel that I've found with semantic patch (see below):

drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write() drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write() drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write() drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write() net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write() drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write() drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write() drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write() net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write() drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write() drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write() drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write() drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write() drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write()

In addition to the cases above another regression caused by f_pos locking is that now FUSE filesystems that implement open with FOPEN_NONSEEKABLE flag, can no longer implement bidirectional stream-like files - for the same reason as above e.g. read can deadlock write locking on file.f_pos in the kernel.

FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990f715 ("fuse: implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and write routines not depending on current position at all, and with both read and write being potentially blocking operations:

See

https://github.com/libfuse/osspd https://lwn.net/Articles/308445

https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1406 https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1438-L1477 https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1479-L1510

Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as "somewhat pipe-like files ..." with read handler not using offset. However that test implements only read without write and cannot exercise the deadlock scenario:

https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c... https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c... https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c...

I've actually hit the read vs write deadlock for real while implementing my FUSE filesystem where there is /head/watch file, for which open creates separate bidirectional socket-like stream in between filesystem and its user with both read and write being later performed simultaneously. And there it is semantically not easy to split the stream into two separate read-only and write-only channels:

https://lab.nexedi.com/kirr/wendelin.core/blob/f13aa600/wcfs/wcfs.go#L88-169

Let's fix this regression. The plan is:

1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS - doing so would break many in-kernel nonseekable_open users which actually use ppos in read/write handlers.

2. Add stream_open() to kernel to open stream-like non-seekable file descriptors. Read and write on such file descriptors would never use nor change ppos. And with that property on stream-like files read and write will be running without taking f_pos lock - i.e. read and write could be running simultaneously.

3. With semantic patch search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access.

4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via steam_open if that bit is present in filesystem open reply.

It was tempting to change fs/fuse/ open handler to use stream_open instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE, and in particular GVFS which actually uses offset in its read and write handlers

https://codesearch.debian.net/search?q=-%3Enonseekable+%3D https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfused... https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfused... https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfused...

so if we would do such a change it will break a real user.

5. Add stream_open and FOPEN_STREAM handling to stable kernels starting from v3.14+ (the kernel where 9c225f2655 first appeared).

This will allow to patch OSSPD and other FUSE filesystems that provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE in their open handler and this way avoid the deadlock on all kernel versions. This should work because fs/fuse/ ignores unknown open flags returned from a filesystem and so passing FOPEN_STREAM to a kernel that is not aware of this flag cannot hurt. In turn the kernel that is not aware of FOPEN_STREAM will be < v3.14 where just FOPEN_NONSEEKABLE is sufficient to implement streams without read vs write deadlock.

This patch adds stream_open, converts /proc/xen/xenbus to it and adds semantic patch to automatically locate in-kernel places that are either required to be converted due to read vs write deadlock, or that are just safe to be converted because read and write do not use ppos and there are no other funky methods in file_operations.

Regarding semantic patch I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations.

The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c)

Cc: Michael Kerrisk mtk.manpages@gmail.com Cc: Yongzhi Pan panyongzhi@gmail.com Cc: Jonathan Corbet corbet@lwn.net Cc: David Vrabel david.vrabel@citrix.com Cc: Juergen Gross jgross@suse.com Cc: Miklos Szeredi miklos@szeredi.hu Cc: Tejun Heo tj@kernel.org Cc: Kirill Tkhai ktkhai@virtuozzo.com Cc: Arnd Bergmann arnd@arndb.de Cc: Christoph Hellwig hch@lst.de Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Julia Lawall Julia.Lawall@lip6.fr Cc: Nikolaus Rath Nikolaus@rath.org Cc: Han-Wen Nienhuys hanwen@google.com Signed-off-by: Kirill Smelkov kirr@nexedi.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/xenbus/xenbus_dev_frontend.c | 4 +- fs/open.c | 18 ++ fs/read_write.c | 5 +- include/linux/fs.h | 4 + scripts/coccinelle/api/stream_open.cocci | 363 +++++++++++++++++++++++ 5 files changed, 389 insertions(+), 5 deletions(-) create mode 100644 scripts/coccinelle/api/stream_open.cocci

diff --git a/drivers/xen/xenbus/xenbus_dev_frontend.c b/drivers/xen/xenbus/xenbus_dev_frontend.c index c3e201025ef0..0782ff3c2273 100644 --- a/drivers/xen/xenbus/xenbus_dev_frontend.c +++ b/drivers/xen/xenbus/xenbus_dev_frontend.c @@ -622,9 +622,7 @@ static int xenbus_file_open(struct inode *inode, struct file *filp) if (xen_store_evtchn == 0) return -ENOENT;

- nonseekable_open(inode, filp); - - filp->f_mode &= ~FMODE_ATOMIC_POS; /* cdev-style semantics */ + stream_open(inode, filp);

u = kzalloc(sizeof(*u), GFP_KERNEL); if (u == NULL) diff --git a/fs/open.c b/fs/open.c index f1c2f855fd43..a00350018a47 100644 --- a/fs/open.c +++ b/fs/open.c @@ -1215,3 +1215,21 @@ int nonseekable_open(struct inode *inode, struct file *filp) }

EXPORT_SYMBOL(nonseekable_open); + +/* + * stream_open is used by subsystems that want stream-like file descriptors. + * Such file descriptors are not seekable and don't have notion of position + * (file.f_pos is always 0). Contrary to file descriptors of other regular + * files, .read() and .write() can run simultaneously. + * + * stream_open never fails and is marked to return int so that it could be + * directly used as file_operations.open . + */ +int stream_open(struct inode *inode, struct file *filp) +{ + filp->f_mode &= ~(FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE | FMODE_ATOMIC_POS); + filp->f_mode |= FMODE_STREAM; + return 0; +} + +EXPORT_SYMBOL(stream_open); diff --git a/fs/read_write.c b/fs/read_write.c index 562974a0616c..85fd7a8ee29e 100644 --- a/fs/read_write.c +++ b/fs/read_write.c @@ -560,12 +560,13 @@ ssize_t vfs_write(struct file *file, const char __user *buf, size_t count, loff_

static inline loff_t file_pos_read(struct file *file) { - return file->f_pos; + return file->f_mode & FMODE_STREAM ? 0 : file->f_pos; }

static inline void file_pos_write(struct file *file, loff_t pos) { - file->f_pos = pos; + if ((file->f_mode & FMODE_STREAM) == 0) + file->f_pos = pos; }

ssize_t ksys_read(unsigned int fd, char __user *buf, size_t count) diff --git a/include/linux/fs.h b/include/linux/fs.h index 111c94c4baa1..d4e1b43a53c3 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -153,6 +153,9 @@ typedef int (dio_iodone_t)(struct kiocb *iocb, loff_t offset, #define FMODE_OPENED ((__force fmode_t)0x80000) #define FMODE_CREATED ((__force fmode_t)0x100000)

+/* File is stream-like */ +#define FMODE_STREAM ((__force fmode_t)0x200000) + /* File was opened by fanotify and shouldn't generate fanotify events */ #define FMODE_NONOTIFY ((__force fmode_t)0x4000000)

@@ -3019,6 +3022,7 @@ extern loff_t no_seek_end_llseek_size(struct file *, loff_t, int, loff_t); extern loff_t no_seek_end_llseek(struct file *, loff_t, int); extern int generic_file_open(struct inode * inode, struct file * filp); extern int nonseekable_open(struct inode * inode, struct file * filp); +extern int stream_open(struct inode * inode, struct file * filp);

#ifdef CONFIG_BLOCK typedef void (dio_submit_t)(struct bio *bio, struct inode *inode, diff --git a/scripts/coccinelle/api/stream_open.cocci b/scripts/coccinelle/api/stream_open.cocci new file mode 100644 index 000000000000..350145da7669 --- /dev/null +++ b/scripts/coccinelle/api/stream_open.cocci @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0 +// Author: Kirill Smelkov (kirr@nexedi.com) +// +// Search for stream-like files that are using nonseekable_open and convert +// them to stream_open. A stream-like file is a file that does not use ppos in +// its read and write. Rationale for the conversion is to avoid deadlock in +// between read and write. + +virtual report +virtual patch +virtual explain // explain decisions in the patch (SPFLAGS="-D explain") + +// stream-like reader & writer - ones that do not depend on f_pos. +@ stream_reader @ +identifier readstream, ppos; +identifier f, buf, len; +type loff_t; +@@ + ssize_t readstream(struct file *f, char *buf, size_t len, loff_t *ppos) + { + ... when != ppos + } + +@ stream_writer @ +identifier writestream, ppos; +identifier f, buf, len; +type loff_t; +@@ + ssize_t writestream(struct file *f, const char *buf, size_t len, loff_t *ppos) + { + ... when != ppos + } + + +// a function that blocks +@ blocks @ +identifier block_f; +identifier wait_event =~ "^wait_event_.*"; +@@ + block_f(...) { + ... when exists + wait_event(...) + ... when exists + } + +// stream_reader that can block inside. +// +// XXX wait_* can be called not directly from current function (e.g. func -> f -> g -> wait()) +// XXX currently reader_blocks supports only direct and 1-level indirect cases. +@ reader_blocks_direct @ +identifier stream_reader.readstream; +identifier wait_event =~ "^wait_event_.*"; +@@ + readstream(...) + { + ... when exists + wait_event(...) + ... when exists + } + +@ reader_blocks_1 @ +identifier stream_reader.readstream; +identifier blocks.block_f; +@@ + readstream(...) + { + ... when exists + block_f(...) + ... when exists + } + +@ reader_blocks depends on reader_blocks_direct || reader_blocks_1 @ +identifier stream_reader.readstream; +@@ + readstream(...) { + ... + } + + +// file_operations + whether they have _any_ .read, .write, .llseek ... at all. +// +// XXX add support for file_operations xxx[N] = ... (sound/core/pcm_native.c) +@ fops0 @ +identifier fops; +@@ + struct file_operations fops = { + ... + }; + +@ has_read @ +identifier fops0.fops; +identifier read_f; +@@ + struct file_operations fops = { + .read = read_f, + }; + +@ has_read_iter @ +identifier fops0.fops; +identifier read_iter_f; +@@ + struct file_operations fops = { + .read_iter = read_iter_f, + }; + +@ has_write @ +identifier fops0.fops; +identifier write_f; +@@ + struct file_operations fops = { + .write = write_f, + }; + +@ has_write_iter @ +identifier fops0.fops; +identifier write_iter_f; +@@ + struct file_operations fops = { + .write_iter = write_iter_f, + }; + +@ has_llseek @ +identifier fops0.fops; +identifier llseek_f; +@@ + struct file_operations fops = { + .llseek = llseek_f, + }; + +@ has_no_llseek @ +identifier fops0.fops; +@@ + struct file_operations fops = { + .llseek = no_llseek, + }; + +@ has_mmap @ +identifier fops0.fops; +identifier mmap_f; +@@ + struct file_operations fops = { + .mmap = mmap_f, + }; + +@ has_copy_file_range @ +identifier fops0.fops; +identifier copy_file_range_f; +@@ + struct file_operations fops = { + .copy_file_range = copy_file_range_f, + }; + +@ has_remap_file_range @ +identifier fops0.fops; +identifier remap_file_range_f; +@@ + struct file_operations fops = { + .remap_file_range = remap_file_range_f, + }; + +@ has_splice_read @ +identifier fops0.fops; +identifier splice_read_f; +@@ + struct file_operations fops = { + .splice_read = splice_read_f, + }; + +@ has_splice_write @ +identifier fops0.fops; +identifier splice_write_f; +@@ + struct file_operations fops = { + .splice_write = splice_write_f, + }; + + +// file_operations that is candidate for stream_open conversion - it does not +// use mmap and other methods that assume @offset access to file. +// +// XXX for simplicity require no .{read/write}_iter and no .splice_{read/write} for now. +// XXX maybe_steam.fops cannot be used in other rules - it gives "bad rule maybe_stream or bad variable fops". +@ maybe_stream depends on (!has_llseek || has_no_llseek) && !has_mmap && !has_copy_file_range && !has_remap_file_range && !has_read_iter && !has_write_iter && !has_splice_read && !has_splice_write @ +identifier fops0.fops; +@@ + struct file_operations fops = { + }; + + +// ---- conversions ---- + +// XXX .open = nonseekable_open -> .open = stream_open +// XXX .open = func -> openfunc -> nonseekable_open + +// read & write +// +// if both are used in the same file_operations together with an opener - +// under that conditions we can use stream_open instead of nonseekable_open. +@ fops_rw depends on maybe_stream @ +identifier fops0.fops, openfunc; +identifier stream_reader.readstream; +identifier stream_writer.writestream; +@@ + struct file_operations fops = { + .open = openfunc, + .read = readstream, + .write = writestream, + }; + +@ report_rw depends on report @ +identifier fops_rw.openfunc; +position p1; +@@ + openfunc(...) { + <... + nonseekable_open@p1 + ...> + } + +@ script:python depends on report && reader_blocks @ +fops << fops0.fops; +p << report_rw.p1; +@@ +coccilib.report.print_report(p[0], + "ERROR: %s: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix." % (fops,)) + +@ script:python depends on report && !reader_blocks @ +fops << fops0.fops; +p << report_rw.p1; +@@ +coccilib.report.print_report(p[0], + "WARNING: %s: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open." % (fops,)) + + +@ explain_rw_deadlocked depends on explain && reader_blocks @ +identifier fops_rw.openfunc; +@@ + openfunc(...) { + <... +- nonseekable_open ++ nonseekable_open /* read & write (was deadlock) */ + ...> + } + + +@ explain_rw_nodeadlock depends on explain && !reader_blocks @ +identifier fops_rw.openfunc; +@@ + openfunc(...) { + <... +- nonseekable_open ++ nonseekable_open /* read & write (no direct deadlock) */ + ...> + } + +@ patch_rw depends on patch @ +identifier fops_rw.openfunc; +@@ + openfunc(...) { + <... +- nonseekable_open ++ stream_open + ...> + } + + +// read, but not write +@ fops_r depends on maybe_stream && !has_write @ +identifier fops0.fops, openfunc; +identifier stream_reader.readstream; +@@ + struct file_operations fops = { + .open = openfunc, + .read = readstream, + }; + +@ report_r depends on report @ +identifier fops_r.openfunc; +position p1; +@@ + openfunc(...) { + <... + nonseekable_open@p1 + ...> + } + +@ script:python depends on report @ +fops << fops0.fops; +p << report_r.p1; +@@ +coccilib.report.print_report(p[0], + "WARNING: %s: .read() has stream semantic; safe to change nonseekable_open -> stream_open." % (fops,)) + +@ explain_r depends on explain @ +identifier fops_r.openfunc; +@@ + openfunc(...) { + <... +- nonseekable_open ++ nonseekable_open /* read only */ + ...> + } + +@ patch_r depends on patch @ +identifier fops_r.openfunc; +@@ + openfunc(...) { + <... +- nonseekable_open ++ stream_open + ...> + } + + +// write, but not read +@ fops_w depends on maybe_stream && !has_read @ +identifier fops0.fops, openfunc; +identifier stream_writer.writestream; +@@ + struct file_operations fops = { + .open = openfunc, + .write = writestream, + }; + +@ report_w depends on report @ +identifier fops_w.openfunc; +position p1; +@@ + openfunc(...) { + <... + nonseekable_open@p1 + ...> + } + +@ script:python depends on report @ +fops << fops0.fops; +p << report_w.p1; +@@ +coccilib.report.print_report(p[0], + "WARNING: %s: .write() has stream semantic; safe to change nonseekable_open -> stream_open." % (fops,)) + +@ explain_w depends on explain @ +identifier fops_w.openfunc; +@@ + openfunc(...) { + <... +- nonseekable_open ++ nonseekable_open /* write only */ + ...> + } + +@ patch_w depends on patch @ +identifier fops_w.openfunc; +@@ + openfunc(...) { + <... +- nonseekable_open ++ stream_open + ...> + } + + +// no read, no write - don't change anything

[ Upstream commit 2125801ccce19249708ca3245d48998e70569ab8 ]

clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64:

arch/arm/mach-iop13xx/setup.c:303:35: error: shift count >= width of type [-Werror,-Wshift-count-overflow] static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64); ^~~~~~~~~~~~~~~~ include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK' #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) ^ ~~~

The ones in iop shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning.

Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Olof Johansson olof@lixom.net Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-iop13xx/setup.c | 8 ++++---- arch/arm/mach-iop13xx/tpmi.c | 10 +++++----- arch/arm/plat-iop/adma.c | 6 +++--- 3 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index 53c316f7301e..fe4932fda01d 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -300,7 +300,7 @@ static struct resource iop13xx_adma_2_resources[] = { } };

-static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64); +static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(32); static struct iop_adma_platform_data iop13xx_adma_0_data = { .hw_id = 0, .pool_size = PAGE_SIZE, @@ -324,7 +324,7 @@ static struct platform_device iop13xx_adma_0_channel = { .resource = iop13xx_adma_0_resources, .dev = { .dma_mask = &iop13xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop13xx_adma_0_data, }, }; @@ -336,7 +336,7 @@ static struct platform_device iop13xx_adma_1_channel = { .resource = iop13xx_adma_1_resources, .dev = { .dma_mask = &iop13xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop13xx_adma_1_data, }, }; @@ -348,7 +348,7 @@ static struct platform_device iop13xx_adma_2_channel = { .resource = iop13xx_adma_2_resources, .dev = { .dma_mask = &iop13xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop13xx_adma_2_data, }, }; diff --git a/arch/arm/mach-iop13xx/tpmi.c b/arch/arm/mach-iop13xx/tpmi.c index db511ec2b1df..116feb6b261e 100644 --- a/arch/arm/mach-iop13xx/tpmi.c +++ b/arch/arm/mach-iop13xx/tpmi.c @@ -152,7 +152,7 @@ static struct resource iop13xx_tpmi_3_resources[] = { } };

-u64 iop13xx_tpmi_mask = DMA_BIT_MASK(64); +u64 iop13xx_tpmi_mask = DMA_BIT_MASK(32); static struct platform_device iop13xx_tpmi_0_device = { .name = "iop-tpmi", .id = 0, @@ -160,7 +160,7 @@ static struct platform_device iop13xx_tpmi_0_device = { .resource = iop13xx_tpmi_0_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, };

@@ -171,7 +171,7 @@ static struct platform_device iop13xx_tpmi_1_device = { .resource = iop13xx_tpmi_1_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, };

@@ -182,7 +182,7 @@ static struct platform_device iop13xx_tpmi_2_device = { .resource = iop13xx_tpmi_2_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, };

@@ -193,7 +193,7 @@ static struct platform_device iop13xx_tpmi_3_device = { .resource = iop13xx_tpmi_3_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, };

diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c index a4d1f8de3b5b..d9612221e484 100644 --- a/arch/arm/plat-iop/adma.c +++ b/arch/arm/plat-iop/adma.c @@ -143,7 +143,7 @@ struct platform_device iop3xx_dma_0_channel = { .resource = iop3xx_dma_0_resources, .dev = { .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop3xx_dma_0_data, }, }; @@ -155,7 +155,7 @@ struct platform_device iop3xx_dma_1_channel = { .resource = iop3xx_dma_1_resources, .dev = { .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop3xx_dma_1_data, }, }; @@ -167,7 +167,7 @@ struct platform_device iop3xx_aau_channel = { .resource = iop3xx_aau_resources, .dev = { .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop3xx_aau_data, }, };

From: Kim Phillips kim.phillips@amd.com

commit 0e3b74e26280f2cf8753717a950b97d424da6046 upstream.

Add a new amd_hw_cache_event_ids_f17h assignment structure set for AMD families 17h and above, since a lot has changed. Specifically:

L1 Data Cache

The data cache access counter remains the same on Family 17h.

For DC misses, PMCx041's definition changes with Family 17h, so instead we use the L2 cache accesses from L1 data cache misses counter (PMCx060,umask=0xc8).

For DC hardware prefetch events, Family 17h breaks compatibility for PMCx067 "Data Prefetcher", so instead, we use PMCx05a "Hardware Prefetch DC Fills."

L1 Instruction Cache

PMCs 0x80 and 0x81 (32-byte IC fetches and misses) are backward compatible on Family 17h.

For prefetches, we remove the erroneous PMCx04B assignment which counts how many software data cache prefetch load instructions were dispatched.

LL - Last Level Cache

Removing PMCs 7D, 7E, and 7F assignments, as they do not exist on Family 17h, where the last level cache is L3. L3 counters can be accessed using the existing AMD Uncore driver.

Data TLB

On Intel machines, data TLB accesses ("dTLB-loads") are assigned to counters that count load/store instructions retired. This is inconsistent with instruction TLB accesses, where Intel implementations report iTLB misses that hit in the STLB.

Ideally, dTLB-loads would count higher level dTLB misses that hit in lower level TLBs, and dTLB-load-misses would report those that also missed in those lower-level TLBs, therefore causing a page table walk. That would be consistent with instruction TLB operation, remove the redundancy between dTLB-loads and L1-dcache-loads, and prevent perf from producing artificially low percentage ratios, i.e. the "0.01%" below:

42,550,869 L1-dcache-loads 41,591,860 dTLB-loads 4,802 dTLB-load-misses # 0.01% of all dTLB cache hits 7,283,682 L1-dcache-stores 7,912,392 dTLB-stores 310 dTLB-store-misses

On AMD Families prior to 17h, the "Data Cache Accesses" counter is used, which is slightly better than load/store instructions retired, but still counts in terms of individual load/store operations instead of TLB operations.

So, for AMD Families 17h and higher, this patch assigns "dTLB-loads" to a counter for L1 dTLB misses that hit in the L2 dTLB, and "dTLB-load-misses" to a counter for L1 DTLB misses that caused L2 DTLB misses and therefore also caused page table walks. This results in a much more accurate view of data TLB performance:

60,961,781 L1-dcache-loads 4,601 dTLB-loads 963 dTLB-load-misses # 20.93% of all dTLB cache hits

Note that for all AMD families, data loads and stores are combined in a single accesses counter, so no 'L1-dcache-stores' are reported separately, and stores are counted with loads in 'L1-dcache-loads'.

Also note that the "% of all dTLB cache hits" string is misleading because (a) "dTLB cache": although TLBs can be considered caches for page tables, in this context, it can be misinterpreted as data cache hits because the figures are similar (at least on Intel), and (b) not all those loads (technically accesses) technically "hit" at that hardware level. "% of all dTLB accesses" would be more clear/accurate.

Instruction TLB

On Intel machines, 'iTLB-loads' measure iTLB misses that hit in the STLB, and 'iTLB-load-misses' measure iTLB misses that also missed in the STLB and completed a page table walk.

For AMD Family 17h and above, for 'iTLB-loads' we replace the erroneous instruction cache fetches counter with PMCx084 "L1 ITLB Miss, L2 ITLB Hit".

For 'iTLB-load-misses' we still use PMCx085 "L1 ITLB Miss, L2 ITLB Miss", but set a 0xff umask because without it the event does not get counted.

Branch Predictor (BPU)

PMCs 0xc2 and 0xc3 continue to be valid across all AMD Families.

Node Level Events

Family 17h does not have a PMCx0e9 counter, and corresponding counters have not been made available publicly, so for now, we mark them as unsupported for Families 17h and above.

Reference:

"Open-Source Register Reference For AMD Family 17h Processors Models 00h-2Fh" Released 7/17/2018, Publication #56255, Revision 3.03: https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf

[ mingo: tidied up the line breaks. ] Signed-off-by: Kim Phillips kim.phillips@amd.com Cc: stable@vger.kernel.org # v4.9+ Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Arnaldo Carvalho de Melo acme@redhat.com Cc: Borislav Petkov bp@alien8.de Cc: H. Peter Anvin hpa@zytor.com Cc: Janakarajan Natarajan Janakarajan.Natarajan@amd.com Cc: Jiri Olsa jolsa@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Martin Liška mliska@suse.cz Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: Pu Wen puwen@hygon.cn Cc: Stephane Eranian eranian@google.com Cc: Suravee Suthikulpanit Suravee.Suthikulpanit@amd.com Cc: Thomas Gleixner tglx@linutronix.de Cc: Thomas Lendacky Thomas.Lendacky@amd.com Cc: Vince Weaver vincent.weaver@maine.edu Cc: linux-kernel@vger.kernel.org Cc: linux-perf-users@vger.kernel.org Fixes: e40ed1542dd7 ("perf/x86: Add perf support for AMD family-17h processors") Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/events/amd/core.c | 111 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 108 insertions(+), 3 deletions(-)

--- a/arch/x86/events/amd/core.c +++ b/arch/x86/events/amd/core.c @@ -116,6 +116,110 @@ static __initconst const u64 amd_hw_cach }, };

+static __initconst const u64 amd_hw_cache_event_ids_f17h + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { +[C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = 0x0040, /* Data Cache Accesses */ + [C(RESULT_MISS)] = 0xc860, /* L2$ access from DC Miss */ + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = 0, + [C(RESULT_MISS)] = 0, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = 0xff5a, /* h/w prefetch DC Fills */ + [C(RESULT_MISS)] = 0, + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = 0x0080, /* Instruction cache fetches */ + [C(RESULT_MISS)] = 0x0081, /* Instruction cache misses */ + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS)] = -1, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = 0, + [C(RESULT_MISS)] = 0, + }, +}, +[C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = 0, + [C(RESULT_MISS)] = 0, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = 0, + [C(RESULT_MISS)] = 0, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = 0, + [C(RESULT_MISS)] = 0, + }, +}, +[C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = 0xff45, /* All L2 DTLB accesses */ + [C(RESULT_MISS)] = 0xf045, /* L2 DTLB misses (PT walks) */ + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = 0, + [C(RESULT_MISS)] = 0, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = 0, + [C(RESULT_MISS)] = 0, + }, +}, +[C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = 0x0084, /* L1 ITLB misses, L2 ITLB hits */ + [C(RESULT_MISS)] = 0xff85, /* L1 ITLB misses, L2 misses */ + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS)] = -1, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS)] = -1, + }, +}, +[C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = 0x00c2, /* Retired Branch Instr. */ + [C(RESULT_MISS)] = 0x00c3, /* Retired Mispredicted BI */ + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS)] = -1, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS)] = -1, + }, +}, +[C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = 0, + [C(RESULT_MISS)] = 0, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS)] = -1, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS)] = -1, + }, +}, +}; + /* * AMD Performance Monitor K7 and later, up to and including Family 16h: */ @@ -861,9 +965,10 @@ __init int amd_pmu_init(void) x86_pmu.amd_nb_constraints = 0; }

- /* Events are common for all AMDs */ - memcpy(hw_cache_event_ids, amd_hw_cache_event_ids, - sizeof(hw_cache_event_ids)); + if (boot_cpu_data.x86 >= 0x17) + memcpy(hw_cache_event_ids, amd_hw_cache_event_ids_f17h, sizeof(hw_cache_event_ids)); + else + memcpy(hw_cache_event_ids, amd_hw_cache_event_ids, sizeof(hw_cache_event_ids));

return 0; }

From: Sean Wang sean.wang@mediatek.com

commit 77f328dbc6cf42f22c691a164958a5452142a542 upstream.

Restore bdev->tx_state with clearing bit BTMTKUART_TX_WAIT_VND_EVT when there is an error on waiting for the corresponding event.

Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by: Sean Wang sean.wang@mediatek.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/bluetooth/btmtkuart.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/bluetooth/btmtkuart.c +++ b/drivers/bluetooth/btmtkuart.c @@ -115,11 +115,13 @@ static int mtk_hci_wmt_sync(struct hci_d TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT); if (err == -EINTR) { bt_dev_err(hdev, "Execution of wmt command interrupted"); + clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); return err; }

if (err) { bt_dev_err(hdev, "Execution of wmt command timed out"); + clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); return -ETIMEDOUT; }

From: Jeremy Fertic jeremyfertic@gmail.com

commit 10bfe7cc1739c22f0aa296b39e53f61e9e3f4d99 upstream.

With adt7516/7/9, internal vref is available for dacs a and b, dacs c and d, or all dacs. The driver doesn't currently support internal vref for all dacs. Change the else if to an if so both bits are checked rather than just one or the other.

Signed-off-by: Jeremy Fertic jeremyfertic@gmail.com Fixes: 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver") Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/staging/iio/addac/adt7316.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/iio/addac/adt7316.c +++ b/drivers/staging/iio/addac/adt7316.c @@ -1086,7 +1086,7 @@ static ssize_t adt7316_store_DAC_interna ldac_config = chip->ldac_config & (~ADT7516_DAC_IN_VREF_MASK); if (data & 0x1) ldac_config |= ADT7516_DAC_AB_IN_VREF; - else if (data & 0x2) + if (data & 0x2) ldac_config |= ADT7516_DAC_CD_IN_VREF; } else { ret = kstrtou8(buf, 16, &data);

From: Jeremy Fertic jeremyfertic@gmail.com

commit 78accaea117c1ae878774974fab91ac4a0b0e2b0 upstream.

The lsb calculation is not masking the correct bits from the user input. Subtract 1 from (1 << offset) to correctly set up the mask to be applied to user input.

The lsb register stores its value starting at the bit 7 position. adt7316_store_DAC() currently assumes the value is at the other end of the register. Shift the lsb value before storing it in a new variable lsb_reg, and write this variable to the lsb register.

Fixes: 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver") Signed-off-by: Jeremy Fertic jeremyfertic@gmail.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/staging/iio/addac/adt7316.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/staging/iio/addac/adt7316.c +++ b/drivers/staging/iio/addac/adt7316.c @@ -1447,7 +1447,7 @@ static ssize_t adt7316_show_DAC(struct a static ssize_t adt7316_store_DAC(struct adt7316_chip_info *chip, int channel, const char *buf, size_t len) { - u8 msb, lsb, offset; + u8 msb, lsb, lsb_reg, offset; u16 data; int ret;

@@ -1465,9 +1465,13 @@ static ssize_t adt7316_store_DAC(struct return -EINVAL;

if (chip->dac_bits > 8) { - lsb = data & (1 << offset); + lsb = data & ((1 << offset) - 1); + if (chip->dac_bits == 12) + lsb_reg = lsb << ADT7316_DA_12_BIT_LSB_SHIFT; + else + lsb_reg = lsb << ADT7316_DA_10_BIT_LSB_SHIFT; ret = chip->bus.write(chip->bus.client, - ADT7316_DA_DATA_BASE + channel * 2, lsb); + ADT7316_DA_DATA_BASE + channel * 2, lsb_reg); if (ret) return -EIO; }

From: Hans de Goede hdegoede@redhat.com

commit aee48a9ffa5a128bf4e433c57c39e015ea5b0208 upstream.

Commit 37c7401e8c1f ("ASoC: Intel: bytcr_rt5651: Fix DMIC map headsetmic mapping"), changed the headsetmic mapping from IN3P to IN2P, this was based on the observation that all bytcr_rt5651 devices I have access to (7 devices) where all using IN3P for the headsetmic. This was an attempt to unifify / simplify the mapping, but it was wrong.

None of those devices was actually using a digital internal mic. Now I've access to a Point of View TAB-P1006W-232 (v1.0) tabler, which does use a DMIC and it does have its headsetmic connected to IN2P, showing that the original mapping was correct, so this commit reverts the change changing the mapping back to IN2P.

Fixes: 37c7401e8c1f ("ASoC: Intel: bytcr_rt5651: Fix DMIC map ... mapping") Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/soc/intel/boards/bytcr_rt5651.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -267,7 +267,7 @@ static const struct snd_soc_dapm_route b static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = { {"DMIC L1", NULL, "Internal Mic"}, {"DMIC R1", NULL, "Internal Mic"}, - {"IN3P", NULL, "Headset Mic"}, + {"IN2P", NULL, "Headset Mic"}, };

static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = {

From: Arnaud Pouliquen arnaud.pouliquen@st.com

commit 17d3069ccf06970e2db3f7cbf4335f207524279e upstream.

This patch fixes the sai driver structure overwriting which results in a cpu dai name equal NULL.

Fixes: 3e086ed ("ASoC: stm32: add SAI driver")

Signed-off-by: Arnaud Pouliquen arnaud.pouliquen@st.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/soc/stm/stm32_sai_sub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/soc/stm/stm32_sai_sub.c +++ b/sound/soc/stm/stm32_sai_sub.c @@ -1194,7 +1194,6 @@ static int stm32_sai_sub_dais_init(struc if (!sai->cpu_dai_drv) return -ENOMEM;

- sai->cpu_dai_drv->name = dev_name(&pdev->dev); if (STM_SAI_IS_PLAYBACK(sai)) { memcpy(sai->cpu_dai_drv, &stm32_sai_playback_dai, sizeof(stm32_sai_playback_dai)); @@ -1204,6 +1203,7 @@ static int stm32_sai_sub_dais_init(struc sizeof(stm32_sai_capture_dai)); sai->cpu_dai_drv->capture.stream_name = sai->cpu_dai_drv->name; } + sai->cpu_dai_drv->name = dev_name(&pdev->dev);

return 0; }

From: Rajneesh Bhardwaj rajneesh.bhardwaj@linux.intel.com

commit e50af8332785355de3cb40d9f5e8c45dbfc86f53 upstream.

Only Coffeelake should use Cannonlake regmap other than Cannonlake platform. This allows Coffeelake special handling only when there is no matching PCI device and default reg map selected as per CPUID is for Sunrisepoint PCH. This change is needed to enable support for newer SoCs such as Icelake.

Cc: "David E. Box" david.e.box@intel.com Cc: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com Fixes: 661405bd817b ("platform/x86: intel_pmc_core: Special case for Coffeelake") Acked-by: "David E. Box" david.e.box@linux.intel.com Signed-off-by: Rajneesh Bhardwaj rajneesh.bhardwaj@linux.intel.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/platform/x86/intel_pmc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/platform/x86/intel_pmc_core.c +++ b/drivers/platform/x86/intel_pmc_core.c @@ -682,7 +682,7 @@ static int __init pmc_core_probe(void) * Sunrisepoint PCH regmap can't be used. Use Cannonlake PCH regmap * in this case. */ - if (!pci_dev_present(pmc_pci_ids)) + if (pmcdev->map == &spt_reg_map && !pci_dev_present(pmc_pci_ids)) pmcdev->map = &cnp_reg_map;

if (lpit_read_residency_count_address(&slp_s0_addr))

From: Daniel Jurgens danielj@mellanox.com

commit 6e88e672b69f0e627acdae74a527b730ea224b6b upstream.

If the MAD agents isn't allowed to manage the subnet, or fails to register for the LSM notifier, the security context is leaked. Free the context in these cases.

Fixes: 47a2b338fe63 ("IB/core: Enforce security on management datagrams") Signed-off-by: Daniel Jurgens danielj@mellanox.com Reviewed-by: Parav Pandit parav@mellanox.com Reported-by: Parav Pandit parav@mellanox.com Signed-off-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/core/security.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/infiniband/core/security.c +++ b/drivers/infiniband/core/security.c @@ -711,16 +711,20 @@ int ib_mad_agent_security_setup(struct i agent->device->name, agent->port_num); if (ret) - return ret; + goto free_security;

agent->lsm_nb.notifier_call = ib_mad_agent_security_change; ret = register_lsm_notifier(&agent->lsm_nb); if (ret) - return ret; + goto free_security;

agent->smp_allowed = true; agent->lsm_nb_reg = true; return 0; + +free_security: + security_ib_free_security(agent->security); + return ret; }

void ib_mad_agent_security_cleanup(struct ib_mad_agent *agent)

From: Anson Huang anson.huang@nxp.com

commit bf2a7ca39fd3ab47ef71c621a7ee69d1813b1f97 upstream.

SNVS IRQ is requested before necessary driver data initialized, if there is a pending IRQ during driver probe phase, kernel NULL pointer panic will occur in IRQ handler. To avoid such scenario, just initialize necessary driver data before enabling IRQ. This patch is inspired by NXP's internal kernel tree.

Fixes: d3dc6e232215 ("input: keyboard: imx: add snvs power key driver") Signed-off-by: Anson Huang Anson.Huang@nxp.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/input/keyboard/snvs_pwrkey.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/input/keyboard/snvs_pwrkey.c +++ b/drivers/input/keyboard/snvs_pwrkey.c @@ -148,6 +148,9 @@ static int imx_snvs_pwrkey_probe(struct return error; }

+ pdata->input = input; + platform_set_drvdata(pdev, pdata); + error = devm_request_irq(&pdev->dev, pdata->irq, imx_snvs_pwrkey_interrupt, 0, pdev->name, pdev); @@ -163,9 +166,6 @@ static int imx_snvs_pwrkey_probe(struct return error; }

- pdata->input = input; - platform_set_drvdata(pdev, pdata); - device_init_wakeup(&pdev->dev, pdata->wakeup);

return 0;

From: Anson Huang anson.huang@nxp.com

commit a329bbe707cee2cf8c660890ef2ad0d00ec7e8a3 upstream.

On i.MX8MQ platform, clock driver uses platform driver model and it is probed after GPIO driver, so when GPIO driver fails to get clock, it should check the error type to decide whether to return defer probe or just ignore the clock operation.

Fixes: 2808801aab8a ("gpio: mxc: add clock operation") Signed-off-by: Anson Huang Anson.Huang@nxp.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpio/gpio-mxc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -438,8 +438,11 @@ static int mxc_gpio_probe(struct platfor

/* the controller clock is optional */ port->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(port->clk)) + if (IS_ERR(port->clk)) { + if (PTR_ERR(port->clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; port->clk = NULL; + }

err = clk_prepare_enable(port->clk); if (err) {

From: Ondrej Mosnacek omosnace@redhat.com

commit a83d6ddaebe541570291205cb538e35ad4ff94f9 upstream.

In the SECURITY_FS_USE_MNTPOINT case we never want to allow relabeling files/directories, so we should never set the SBLABEL_MNT flag. The 'special handling' in selinux_is_sblabel_mnt() is only intended for when the behavior is set to SECURITY_FS_USE_GENFS.

While there, make the logic in selinux_is_sblabel_mnt() more explicit and add a BUILD_BUG_ON() to make sure that introducing a new SECURITY_FS_USE_* forces a review of the logic.

Fixes: d5f3a5f6e7e7 ("selinux: add security in-core xattr support for pstore and debugfs") Signed-off-by: Ondrej Mosnacek omosnace@redhat.com Reviewed-by: Stephen Smalley sds@tycho.nsa.gov Signed-off-by: Paul Moore paul@paul-moore.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- security/selinux/hooks.c | 40 +++++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-)

--- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -497,16 +497,10 @@ static int may_context_mount_inode_relab return rc; }

-static int selinux_is_sblabel_mnt(struct super_block *sb) +static int selinux_is_genfs_special_handling(struct super_block *sb) { - struct superblock_security_struct *sbsec = sb->s_security; - - return sbsec->behavior == SECURITY_FS_USE_XATTR || - sbsec->behavior == SECURITY_FS_USE_TRANS || - sbsec->behavior == SECURITY_FS_USE_TASK || - sbsec->behavior == SECURITY_FS_USE_NATIVE || - /* Special handling. Genfs but also in-core setxattr handler */ - !strcmp(sb->s_type->name, "sysfs") || + /* Special handling. Genfs but also in-core setxattr handler */ + return !strcmp(sb->s_type->name, "sysfs") || !strcmp(sb->s_type->name, "pstore") || !strcmp(sb->s_type->name, "debugfs") || !strcmp(sb->s_type->name, "tracefs") || @@ -516,6 +510,34 @@ static int selinux_is_sblabel_mnt(struct !strcmp(sb->s_type->name, "cgroup2"))); }

+static int selinux_is_sblabel_mnt(struct super_block *sb) +{ + struct superblock_security_struct *sbsec = sb->s_security; + + /* + * IMPORTANT: Double-check logic in this function when adding a new + * SECURITY_FS_USE_* definition! + */ + BUILD_BUG_ON(SECURITY_FS_USE_MAX != 7); + + switch (sbsec->behavior) { + case SECURITY_FS_USE_XATTR: + case SECURITY_FS_USE_TRANS: + case SECURITY_FS_USE_TASK: + case SECURITY_FS_USE_NATIVE: + return 1; + + case SECURITY_FS_USE_GENFS: + return selinux_is_genfs_special_handling(sb); + + /* Never allow relabeling on context mounts */ + case SECURITY_FS_USE_MNTPOINT: + case SECURITY_FS_USE_NONE: + default: + return 0; + } +} + static int sb_finish_set_opts(struct super_block *sb) { struct superblock_security_struct *sbsec = sb->s_security;

From: Aneesh Kumar K.V aneesh.kumar@linux.ibm.com

commit 3b4d07d2674f6b4a9281031f99d1f7efd325b16d upstream.

When doing top-down search the low_limit is not PAGE_SIZE but rather max(PAGE_SIZE, mmap_min_addr). This handle cases in which mmap_min_addr > PAGE_SIZE.

Fixes: fba2369e6ceb ("mm: use vm_unmapped_area() on powerpc architecture") Reviewed-by: Laurent Dufour ldufour@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V aneesh.kumar@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/powerpc/mm/slice.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/arch/powerpc/mm/slice.c +++ b/arch/powerpc/mm/slice.c @@ -31,6 +31,7 @@ #include <linux/spinlock.h> #include <linux/export.h> #include <linux/hugetlb.h> +#include <linux/security.h> #include <asm/mman.h> #include <asm/mmu.h> #include <asm/copro.h> @@ -376,6 +377,7 @@ static unsigned long slice_find_area_top int pshift = max_t(int, mmu_psize_defs[psize].shift, PAGE_SHIFT); unsigned long addr, found, prev; struct vm_unmapped_area_info info; + unsigned long min_addr = max(PAGE_SIZE, mmap_min_addr);

info.flags = VM_UNMAPPED_AREA_TOPDOWN; info.length = len; @@ -392,7 +394,7 @@ static unsigned long slice_find_area_top if (high_limit > DEFAULT_MAP_WINDOW) addr += mm->context.slb_addr_limit - DEFAULT_MAP_WINDOW;

- while (addr > PAGE_SIZE) { + while (addr > min_addr) { info.high_limit = addr; if (!slice_scan_available(addr - 1, available, 0, &addr)) continue; @@ -404,8 +406,8 @@ static unsigned long slice_find_area_top * Check if we need to reduce the range, or if we can * extend it to cover the previous available slice. */ - if (addr < PAGE_SIZE) - addr = PAGE_SIZE; + if (addr < min_addr) + addr = min_addr; else if (slice_scan_available(addr - 1, available, 0, &prev)) { addr = prev; goto prev_slice; @@ -527,7 +529,7 @@ unsigned long slice_get_unmapped_area(un addr = _ALIGN_UP(addr, page_size); slice_dbg(" aligned addr=%lx\n", addr); /* Ignore hint if it's too large or overlaps a VMA */ - if (addr > high_limit - len || + if (addr > high_limit - len || addr < mmap_min_addr || !slice_area_is_free(mm, addr, len)) addr = 0; }

From: David Müller dave.mueller@gmx.ch

commit 7c2e07130090ae001a97a6b65597830d6815e93e upstream.

Since commit 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL"), the pmc_plt_clocks of the Bay Trail SoC are unconditionally gated off. Unfortunately this will break systems where these clocks are used for external purposes beyond the kernel's knowledge. Fix it by implementing a system specific quirk to mark the necessary pmc_plt_clks as critical.

Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Signed-off-by: David Müller dave.mueller@gmx.ch Signed-off-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/clk/x86/clk-pmc-atom.c | 14 +++++++++++--- drivers/platform/x86/pmc_atom.c | 21 +++++++++++++++++++++ include/linux/platform_data/x86/clk-pmc-atom.h | 3 +++ 3 files changed, 35 insertions(+), 3 deletions(-)

--- a/drivers/clk/x86/clk-pmc-atom.c +++ b/drivers/clk/x86/clk-pmc-atom.c @@ -165,7 +165,7 @@ static const struct clk_ops plt_clk_ops };

static struct clk_plt *plt_clk_register(struct platform_device *pdev, int id, - void __iomem *base, + const struct pmc_clk_data *pmc_data, const char **parent_names, int num_parents) { @@ -184,9 +184,17 @@ static struct clk_plt *plt_clk_register( init.num_parents = num_parents;

pclk->hw.init = &init; - pclk->reg = base + PMC_CLK_CTL_OFFSET + id * PMC_CLK_CTL_SIZE; + pclk->reg = pmc_data->base + PMC_CLK_CTL_OFFSET + id * PMC_CLK_CTL_SIZE; spin_lock_init(&pclk->lock);

+ /* + * On some systems, the pmc_plt_clocks already enabled by the + * firmware are being marked as critical to avoid them being + * gated by the clock framework. + */ + if (pmc_data->critical && plt_clk_is_enabled(&pclk->hw)) + init.flags |= CLK_IS_CRITICAL; + ret = devm_clk_hw_register(&pdev->dev, &pclk->hw); if (ret) { pclk = ERR_PTR(ret); @@ -332,7 +340,7 @@ static int plt_clk_probe(struct platform return PTR_ERR(parent_names);

for (i = 0; i < PMC_CLK_NUM; i++) { - data->clks[i] = plt_clk_register(pdev, i, pmc_data->base, + data->clks[i] = plt_clk_register(pdev, i, pmc_data, parent_names, data->nparents); if (IS_ERR(data->clks[i])) { err = PTR_ERR(data->clks[i]); --- a/drivers/platform/x86/pmc_atom.c +++ b/drivers/platform/x86/pmc_atom.c @@ -17,6 +17,7 @@

#include <linux/debugfs.h> #include <linux/device.h> +#include <linux/dmi.h> #include <linux/init.h> #include <linux/io.h> #include <linux/platform_data/x86/clk-pmc-atom.h> @@ -391,11 +392,27 @@ static int pmc_dbgfs_register(struct pmc } #endif /* CONFIG_DEBUG_FS */

+/* + * Some systems need one or more of their pmc_plt_clks to be + * marked as critical. + */ +static const struct dmi_system_id critclk_systems[] __initconst = { + { + .ident = "MPL CEC1x", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MPL AG"), + DMI_MATCH(DMI_PRODUCT_NAME, "CEC10 Family"), + }, + }, + { /*sentinel*/ } +}; + static int pmc_setup_clks(struct pci_dev *pdev, void __iomem *pmc_regmap, const struct pmc_data *pmc_data) { struct platform_device *clkdev; struct pmc_clk_data *clk_data; + const struct dmi_system_id *d = dmi_first_match(critclk_systems);

clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL); if (!clk_data) @@ -403,6 +420,10 @@ static int pmc_setup_clks(struct pci_dev

clk_data->base = pmc_regmap; /* offset is added by client */ clk_data->clks = pmc_data->clks; + if (d) { + clk_data->critical = true; + pr_info("%s critclks quirk enabled\n", d->ident); + }

clkdev = platform_device_register_data(&pdev->dev, "clk-pmc-atom", PLATFORM_DEVID_NONE, --- a/include/linux/platform_data/x86/clk-pmc-atom.h +++ b/include/linux/platform_data/x86/clk-pmc-atom.h @@ -35,10 +35,13 @@ struct pmc_clk { * * @base: PMC clock register base offset * @clks: pointer to set of registered clocks, typically 0..5 + * @critical: flag to indicate if firmware enabled pmc_plt_clks + * should be marked as critial or not */ struct pmc_clk_data { void __iomem *base; const struct pmc_clk *clks; + bool critical; };

#endif /* __PLATFORM_DATA_X86_CLK_PMC_ATOM_H */

From: Qian Cai cai@lca.pw

commit 0d02113b31b2017dd349ec9df2314e798a90fa6e upstream.

The first kmemleak_scan() call after boot would trigger the crash below because this callpath:

kernel_init free_initmem mem_encrypt_free_decrypted_mem free_init_pages

unmaps memory inside the .bss when DEBUG_PAGEALLOC=y.

kmemleak_init() will register the .data/.bss sections and then kmemleak_scan() will scan those addresses and dereference them looking for pointer references. If free_init_pages() frees and unmaps pages in those sections, kmemleak_scan() will crash if referencing one of those addresses:

BUG: unable to handle kernel paging request at ffffffffbd402000 CPU: 12 PID: 325 Comm: kmemleak Not tainted 5.1.0-rc4+ #4 RIP: 0010:scan_block Call Trace: scan_gray_list kmemleak_scan kmemleak_scan_thread kthread ret_from_fork

Since kmemleak_free_part() is tolerant to unknown objects (not tracked by kmemleak), it is fine to call it from free_init_pages() even if not all address ranges passed to this function are known to kmemleak.

[ bp: Massage. ]

Fixes: b3f0907c71e0 ("x86/mm: Add .bss..decrypted section to hold shared variables") Signed-off-by: Qian Cai cai@lca.pw Signed-off-by: Borislav Petkov bp@suse.de Reviewed-by: Catalin Marinas catalin.marinas@arm.com Cc: Andy Lutomirski luto@kernel.org Cc: Brijesh Singh brijesh.singh@amd.com Cc: Dave Hansen dave.hansen@linux.intel.com Cc: "H. Peter Anvin" hpa@zytor.com Cc: Ingo Molnar mingo@redhat.com Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: x86-ml x86@kernel.org Link: https://lkml.kernel.org/r/20190423165811.36699-1-cai@lca.pw Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/mm/init.c | 6 ++++++ 1 file changed, 6 insertions(+)

--- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -6,6 +6,7 @@ #include <linux/bootmem.h> /* for max_low_pfn */ #include <linux/swapfile.h> #include <linux/swapops.h> +#include <linux/kmemleak.h>

#include <asm/set_memory.h> #include <asm/e820/api.h> @@ -767,6 +768,11 @@ void free_init_pages(char *what, unsigne if (debug_pagealloc_enabled()) { pr_info("debug: unmapping init [mem %#010lx-%#010lx]\n", begin, end - 1); + /* + * Inform kmemleak about the hole in the memory since the + * corresponding pages will be unmapped. + */ + kmemleak_free_part((void *)begin, end - begin); set_memory_np(begin, (end - begin) >> PAGE_SHIFT); } else { /*

From: Nicolas Le Bayon nicolas.le.bayon@st.com

commit c86da50cfd840edf223a242580913692acddbcf6 upstream.

It conforms with Reference Manual I2C timing section.

Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Nicolas Le Bayon nicolas.le.bayon@st.com Signed-off-by: Bich Hemon bich.hemon@st.com Reviewed-by: Pierre-Yves MORDRET pierre-yves.mordret@st.com Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/i2c/busses/i2c-stm32f7.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -424,7 +424,7 @@ static int stm32f7_i2c_compute_timing(st STM32F7_I2C_ANALOG_FILTER_DELAY_MAX : 0); dnf_delay = setup->dnf * i2cclk;

- sdadel_min = setup->fall_time - i2c_specs[setup->speed].hddat_min - + sdadel_min = i2c_specs[setup->speed].hddat_min + setup->fall_time - af_delay_min - (setup->dnf + 3) * i2cclk;

sdadel_max = i2c_specs[setup->speed].vddat_max - setup->rise_time -