From: Federico Pellegrin fede@evolware.org

According to the datasheet PA7 can be set to either function A, B or C (see table 6-2 of DS60001579D). The previous value would permit just configuring with function C.

Signed-off-by: Federico Pellegrin fede@evolware.org Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Cc: stable@vger.kernel.org # 5.6+ Cc: Sandeep Sheriker Mallikarjun sandeepsheriker.mallikarjun@microchip.com Signed-off-by: Nicolas Ferre nicolas.ferre@microchip.com --- arch/arm/boot/dts/at91-sam9x60ek.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 73b6b1f89de9..4c40ae571154 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -336,7 +336,7 @@ ethernet-phy@0 { &pinctrl { atmel,mux-mask = < /* A B C */ - 0xFFFFFE7F 0xC0E0397F 0xEF00019D /* pioA */ + 0xFFFFFEFF 0xC0E039FF 0xEF00019D /* pioA */ 0x03FFFFFF 0x02FC7E68 0x00780000 /* pioB */ 0xffffffff 0xF83FFFFF 0xB800F3FC /* pioC */ 0x003FFFFF 0x003F8000 0x00000000 /* pioD */