This is a note to let you know that I've just added the patch titled

usb: xhci: only set D3hot for pci device

to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From f2c710f7dca8457e88b4ac9de2060f011254f9dd Mon Sep 17 00:00:00 2001

From: Henry Lin henryl@nvidia.com Date: Wed, 11 Dec 2019 16:20:04 +0200 Subject: usb: xhci: only set D3hot for pci device

Xhci driver cannot call pci_set_power_state() on non-pci xhci host controllers. For example, NVIDIA Tegra XHCI host controller which acts as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform hits this issue during shutdown.

Cc: stable@vger.kernel.org Fixes: 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell") Signed-off-by: Henry Lin henryl@nvidia.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20191211142007.8847-4-mathias.nyman@linux.intel.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci-pci.c | 13 +++++++++++++ drivers/usb/host/xhci.c | 7 ++----- drivers/usb/host/xhci.h | 1 + 3 files changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index a0025d23b257..2907fe4d78dd 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -521,6 +521,18 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) } #endif /* CONFIG_PM */

+static void xhci_pci_shutdown(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + + xhci_shutdown(hcd); + + /* Yet another workaround for spurious wakeups at shutdown with HSW */ + if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) + pci_set_power_state(pdev, PCI_D3hot); +} + /*-------------------------------------------------------------------------*/

/* PCI driver selection metadata; PCI hotplugging uses this */ @@ -556,6 +568,7 @@ static int __init xhci_pci_init(void) #ifdef CONFIG_PM xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend; xhci_pci_hc_driver.pci_resume = xhci_pci_resume; + xhci_pci_hc_driver.shutdown = xhci_pci_shutdown; #endif return pci_register_driver(&xhci_pci_driver); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 6721d059f58a..c5ee562c4c74 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -770,7 +770,7 @@ static void xhci_stop(struct usb_hcd *hcd) * * This will only ever be called with the main usb_hcd (the USB3 roothub). */ -static void xhci_shutdown(struct usb_hcd *hcd) +void xhci_shutdown(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd);

@@ -789,11 +789,8 @@ static void xhci_shutdown(struct usb_hcd *hcd) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_shutdown completed - status = %x", readl(&xhci->op_regs->status)); - - /* Yet another workaround for spurious wakeups at shutdown with HSW */ - if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) - pci_set_power_state(to_pci_dev(hcd->self.sysdev), PCI_D3hot); } +EXPORT_SYMBOL_GPL(xhci_shutdown);

#ifdef CONFIG_PM static void xhci_save_registers(struct xhci_hcd *xhci) diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index dc6f62a4b197..13d8838cd552 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -2050,6 +2050,7 @@ int xhci_start(struct xhci_hcd *xhci); int xhci_reset(struct xhci_hcd *xhci); int xhci_run(struct usb_hcd *hcd); int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks); +void xhci_shutdown(struct usb_hcd *hcd); void xhci_init_driver(struct hc_driver *drv, const struct xhci_driver_overrides *over); int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id);