[PATCH AUTOSEL 6.6 01/12] ASoC: imx-card: Adjust over allocation of memory in imx_card_parse_of()

List overview All Threads
Download

newer

older

[PATCH AUTOSEL 6.1 1/6] ASoC:...

[PATCH AUTOSEL 6.12 01/18] ASoC:...

Sasha Levin

6 May 2025 6 May '25

9:36 p.m.

From: Chenyuan Yang chenyuan0y@gmail.com

[ Upstream commit a9a69c3b38c89d7992fb53db4abb19104b531d32 ]

Incorrect types are used as sizeof() arguments in devm_kcalloc(). It should be sizeof(dai_link_data) for link_data instead of sizeof(snd_soc_dai_link).

This is found by our static analysis tool.

Signed-off-by: Chenyuan Yang chenyuan0y@gmail.com Link: https://patch.msgid.link/20250406210854.149316-1-chenyuan0y@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/fsl/imx-card.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/fsl/imx-card.c b/sound/soc/fsl/imx-card.c index 7128bcf3a743e..bb304de5cc38a 100644 --- a/sound/soc/fsl/imx-card.c +++ b/sound/soc/fsl/imx-card.c @@ -517,7 +517,7 @@ static int imx_card_parse_of(struct imx_card_data *data) if (!card->dai_link) return -ENOMEM;

- data->link_data = devm_kcalloc(dev, num_links, sizeof(*link), GFP_KERNEL); + data->link_data = devm_kcalloc(dev, num_links, sizeof(*link_data), GFP_KERNEL); if (!data->link_data) return -ENOMEM;

-- 2.39.5

Show replies by date

Sasha Levin

6 May 6 May

9:36 p.m.

New subject: [PATCH AUTOSEL 6.6 02/12] book3s64/radix: Fix compile errors when CONFIG_ARCH_WANT_OPTIMIZE_DAX_VMEMMAP=n

From: "Ritesh Harjani (IBM)" ritesh.list@gmail.com

[ Upstream commit 29bdc1f1c1df80868fb35bc69d1f073183adc6de ]

Fix compile errors when CONFIG_ARCH_WANT_OPTIMIZE_DAX_VMEMMAP=n

Signed-off-by: Ritesh Harjani (IBM) ritesh.list@gmail.com Signed-off-by: Donet Tom donettom@linux.ibm.com Signed-off-by: Madhavan Srinivasan maddy@linux.ibm.com Link: https://patch.msgid.link/8231763344223c193e3452eab0ae8ea966aff466.1741609795... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/mm/book3s64/radix_pgtable.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c index c6a4ac766b2bf..425b1a9eed8f0 100644 --- a/arch/powerpc/mm/book3s64/radix_pgtable.c +++ b/arch/powerpc/mm/book3s64/radix_pgtable.c @@ -912,7 +912,7 @@ int __meminit radix__vmemmap_create_mapping(unsigned long start, return 0; }

- +#ifdef CONFIG_ARCH_WANT_OPTIMIZE_DAX_VMEMMAP bool vmemmap_can_optimize(struct vmem_altmap *altmap, struct dev_pagemap *pgmap) { if (radix_enabled()) @@ -920,6 +920,7 @@ bool vmemmap_can_optimize(struct vmem_altmap *altmap, struct dev_pagemap *pgmap)

return false; } +#endif

int __meminit vmemmap_check_pmd(pmd_t *pmdp, int node, unsigned long addr, unsigned long next)

-- 2.39.5

Sasha Levin

9:36 p.m.

New subject: [PATCH AUTOSEL 6.6 03/12] pinctrl: meson: define the pull up/down resistor value as 60 kOhm

From: Martin Blumenstingl martin.blumenstingl@googlemail.com

[ Upstream commit e56088a13708757da68ad035269d69b93ac8c389 ]

The public datasheets of the following Amlogic SoCs describe a typical resistor value for the built-in pull up/down resistor: - Meson8/8b/8m2: not documented - GXBB (S905): 60 kOhm - GXL (S905X): 60 kOhm - GXM (S912): 60 kOhm - G12B (S922X): 60 kOhm - SM1 (S905D3): 60 kOhm

The public G12B and SM1 datasheets additionally state min and max values: - min value: 50 kOhm for both, pull-up and pull-down - max value for the pull-up: 70 kOhm - max value for the pull-down: 130 kOhm

Use 60 kOhm in the pinctrl-meson driver as well so it's shown in the debugfs output. It may not be accurate for Meson8/8b/8m2 but in reality 60 kOhm is closer to the actual value than 1 Ohm.

Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Link: https://lore.kernel.org/20250329190132.855196-1-martin.blumenstingl@googlema... Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/meson/pinctrl-meson.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c index 524424ee6c4e7..5cc00fdc48d84 100644 --- a/drivers/pinctrl/meson/pinctrl-meson.c +++ b/drivers/pinctrl/meson/pinctrl-meson.c @@ -486,7 +486,7 @@ static int meson_pinconf_get(struct pinctrl_dev *pcdev, unsigned int pin, case PIN_CONFIG_BIAS_PULL_DOWN: case PIN_CONFIG_BIAS_PULL_UP: if (meson_pinconf_get_pull(pc, pin) == param) - arg = 1; + arg = 60000; else return -EINVAL; break;

-- 2.39.5

Sasha Levin

9:36 p.m.

New subject: [PATCH AUTOSEL 6.6 04/12] ASoC: cs42l43: Disable headphone clamps during type detection

From: Charles Keepax ckeepax@opensource.cirrus.com

[ Upstream commit 70ad2e6bd180f94be030aef56e59693e36d945f3 ]

The headphone clamps cause fairly loud pops during type detect because they sink current from the detection process itself. Disable the clamps whilst the type detect runs, to improve the detection pop performance.

Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://patch.msgid.link/20250423090944.1504538-1-ckeepax@opensource.cirrus.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs42l43-jack.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/sound/soc/codecs/cs42l43-jack.c b/sound/soc/codecs/cs42l43-jack.c index 0b8e88b19888e..6d8455c1bee6d 100644 --- a/sound/soc/codecs/cs42l43-jack.c +++ b/sound/soc/codecs/cs42l43-jack.c @@ -642,6 +642,10 @@ static int cs42l43_run_type_detect(struct cs42l43_codec *priv)

reinit_completion(&priv->type_detect);

+ regmap_update_bits(cs42l43->regmap, CS42L43_STEREO_MIC_CLAMP_CTRL, + CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_VAL_MASK, + CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_VAL_MASK); + cs42l43_start_hs_bias(priv, true); regmap_update_bits(cs42l43->regmap, CS42L43_HS2, CS42L43_HSDET_MODE_MASK, 0x3 << CS42L43_HSDET_MODE_SHIFT); @@ -653,6 +657,9 @@ static int cs42l43_run_type_detect(struct cs42l43_codec *priv) CS42L43_HSDET_MODE_MASK, 0x2 << CS42L43_HSDET_MODE_SHIFT); cs42l43_stop_hs_bias(priv);

+ regmap_update_bits(cs42l43->regmap, CS42L43_STEREO_MIC_CLAMP_CTRL, + CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_VAL_MASK, 0); + if (!time_left) return -ETIMEDOUT;

-- 2.39.5

Sasha Levin

9:36 p.m.

New subject: [PATCH AUTOSEL 6.6 05/12] ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013

From: Takashi Iwai tiwai@suse.de

[ Upstream commit a549b927ea3f5e50b1394209b64e6e17e31d4db8 ]

Acer Aspire SW3-013 requires the very same quirk as other Acer Aspire model for making it working.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=220011 Signed-off-by: Takashi Iwai tiwai@suse.de Link: https://patch.msgid.link/20250420085716.12095-1-tiwai@suse.de Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index ce80adc30fe94..6a85e8fdcae64 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -576,6 +576,19 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, + { /* Acer Aspire SW3-013 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW3-013"), + }, + .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"),

-- 2.39.5

Sasha Levin

9:36 p.m.

New subject: [PATCH AUTOSEL 6.6 06/12] ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxx

From: Takashi Iwai tiwai@suse.de

[ Upstream commit be0c40da888840fe91b45474cb70779e6cbaf7ca ]

HP Spectre x360 15-df1xxx with SSID 13c:863e requires similar workarounds that were applied to another HP Spectre x360 models; it has a mute LED only, no micmute LEDs, and needs the speaker GPIO seup.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=220054 Link: https://patch.msgid.link/20250427081035.11567-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/patch_realtek.c | 42 +++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2f3f295f2b0cb..62a8a5338178c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6789,6 +6789,41 @@ static void alc285_fixup_hp_spectre_x360_eb1(struct hda_codec *codec, } }

+/* GPIO1 = amplifier on/off */ +static void alc285_fixup_hp_spectre_x360_df1(struct hda_codec *codec, + const struct hda_fixup *fix, + int action) +{ + struct alc_spec *spec = codec->spec; + static const hda_nid_t conn[] = { 0x02 }; + static const struct hda_pintbl pincfgs[] = { + { 0x14, 0x90170110 }, /* front/high speakers */ + { 0x17, 0x90170130 }, /* back/bass speakers */ + { } + }; + + // enable mute led + alc285_fixup_hp_mute_led_coefbit(codec, fix, action); + + switch (action) { + case HDA_FIXUP_ACT_PRE_PROBE: + /* needed for amp of back speakers */ + spec->gpio_mask |= 0x01; + spec->gpio_dir |= 0x01; + snd_hda_apply_pincfgs(codec, pincfgs); + /* share DAC to have unified volume control */ + snd_hda_override_conn_list(codec, 0x14, ARRAY_SIZE(conn), conn); + snd_hda_override_conn_list(codec, 0x17, ARRAY_SIZE(conn), conn); + break; + case HDA_FIXUP_ACT_INIT: + /* need to toggle GPIO to enable the amp of back speakers */ + alc_update_gpio_data(codec, 0x01, true); + msleep(100); + alc_update_gpio_data(codec, 0x01, false); + break; + } +} + static void alc285_fixup_hp_spectre_x360(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -7376,6 +7411,7 @@ enum { ALC280_FIXUP_HP_9480M, ALC245_FIXUP_HP_X360_AMP, ALC285_FIXUP_HP_SPECTRE_X360_EB1, + ALC285_FIXUP_HP_SPECTRE_X360_DF1, ALC285_FIXUP_HP_ENVY_X360, ALC288_FIXUP_DELL_HEADSET_MODE, ALC288_FIXUP_DELL1_MIC_NO_PRESENCE, @@ -9407,6 +9443,10 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc285_fixup_hp_spectre_x360_eb1 }, + [ALC285_FIXUP_HP_SPECTRE_X360_DF1] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc285_fixup_hp_spectre_x360_df1 + }, [ALC285_FIXUP_HP_ENVY_X360] = { .type = HDA_FIXUP_FUNC, .v.func = alc285_fixup_hp_envy_x360, @@ -10006,6 +10046,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x86c1, "HP Laptop 15-da3001TU", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2), SND_PCI_QUIRK(0x103c, 0x86c7, "HP Envy AiO 32", ALC274_FIXUP_HP_ENVY_GPIO), SND_PCI_QUIRK(0x103c, 0x86e7, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), + SND_PCI_QUIRK(0x103c, 0x863e, "HP Spectre x360 15-df1xxx", ALC285_FIXUP_HP_SPECTRE_X360_DF1), SND_PCI_QUIRK(0x103c, 0x86e8, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), SND_PCI_QUIRK(0x103c, 0x86f9, "HP Spectre x360 13-aw0xxx", ALC285_FIXUP_HP_SPECTRE_X360_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x8716, "HP Elite Dragonfly G2 Notebook PC", ALC285_FIXUP_HP_GPIO_AMP_INIT), @@ -10754,6 +10795,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC295_FIXUP_HP_OMEN, .name = "alc295-hp-omen"}, {.id = ALC285_FIXUP_HP_SPECTRE_X360, .name = "alc285-hp-spectre-x360"}, {.id = ALC285_FIXUP_HP_SPECTRE_X360_EB1, .name = "alc285-hp-spectre-x360-eb1"}, + {.id = ALC285_FIXUP_HP_SPECTRE_X360_DF1, .name = "alc285-hp-spectre-x360-df1"}, {.id = ALC285_FIXUP_HP_ENVY_X360, .name = "alc285-hp-envy-x360"}, {.id = ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP, .name = "alc287-ideapad-bass-spk-amp"}, {.id = ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN, .name = "alc287-yoga9-bass-spk-pin"},

-- 2.39.5

Sasha Levin

9:36 p.m.

New subject: [PATCH AUTOSEL 6.6 07/12] nvme-pci: add quirks for device 126f:1001

From: Wentao Guan guanwentao@uniontech.com

[ Upstream commit 5b960f92ac3e5b4d7f60a506a6b6735eead1da01 ]

This commit adds NVME_QUIRK_NO_DEEPEST_PS and NVME_QUIRK_BOGUS_NID for device [126f:1001].

It is similar to commit e89086c43f05 ("drivers/nvme: Add quirks for device 126f:2262")

Diff is according the dmesg, use NVME_QUIRK_IGNORE_DEV_SUBNQN.

dmesg | grep -i nvme0: nvme nvme0: pci function 0000:01:00.0 nvme nvme0: missing or invalid SUBNQN field. nvme nvme0: 12/0/0 default/read/poll queues

Link:https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... Signed-off-by: Wentao Guan guanwentao@uniontech.com Signed-off-by: WangYuli wangyuli@uniontech.com Reviewed-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/pci.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index a763df0200ab4..8eee28282b1e9 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3427,6 +3427,9 @@ static const struct pci_device_id nvme_id_table[] = { .driver_data = NVME_QUIRK_BOGUS_NID, }, { PCI_DEVICE(0x1217, 0x8760), /* O2 Micro 64GB Steam Deck */ .driver_data = NVME_QUIRK_DMAPOOL_ALIGN_512, }, + { PCI_DEVICE(0x126f, 0x1001), /* Silicon Motion generic */ + .driver_data = NVME_QUIRK_NO_DEEPEST_PS | + NVME_QUIRK_IGNORE_DEV_SUBNQN, }, { PCI_DEVICE(0x126f, 0x2262), /* Silicon Motion generic */ .driver_data = NVME_QUIRK_NO_DEEPEST_PS | NVME_QUIRK_BOGUS_NID, },

-- 2.39.5

Sasha Levin

9:36 p.m.

New subject: [PATCH AUTOSEL 6.6 08/12] nvme-pci: add quirks for WDC Blue SN550 15b7:5009

From: Wentao Guan guanwentao@uniontech.com

[ Upstream commit ab35ad950d439ec3409509835d229b3d93d3c7f9 ]

Add two quirks for the WDC Blue SN550 (PCI ID 15b7:5009) based on user reports and hardware analysis:

- NVME_QUIRK_NO_DEEPEST_PS: liaozw talked to me the problem and solved with nvme_core.default_ps_max_latency_us=0, so add the quirk. I also found some reports in the following link.

- NVME_QUIRK_BROKEN_MSI: after get the lspci from Jack Rio. I think that the disk also have NVME_QUIRK_BROKEN_MSI. described in commit d5887dc6b6c0 ("nvme-pci: Add quirk for broken MSIs") as sean said in link which match the MSI 1/32 and MSI-X 17.

Log: lspci -nn | grep -i memory 03:00.0 Non-Volatile memory controller [0108]: Sandisk Corp SanDisk Ultra 3D / WD PC SN530, IX SN530, Blue SN550 NVMe SSD (DRAM-less) [15b7:5009] (rev 01) lspci -v -d 15b7:5009 03:00.0 Non-Volatile memory controller: Sandisk Corp SanDisk Ultra 3D / WD PC SN530, IX SN530, Blue SN550 NVMe SSD (DRAM-less) (rev 01) (prog-if 02 [NVM Express]) Subsystem: Sandisk Corp WD Blue SN550 NVMe SSD Flags: bus master, fast devsel, latency 0, IRQ 35, IOMMU group 10 Memory at fe800000 (64-bit, non-prefetchable) [size=16K] Memory at fe804000 (64-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [b0] MSI-X: Enable+ Count=17 Masked- Capabilities: [c0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [150] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [1b8] Latency Tolerance Reporting Capabilities: [300] Secondary PCI Express Capabilities: [900] L1 PM Substates Kernel driver in use: nvme dmesg | grep nvme [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.12.20-amd64-desktop-rolling root=UUID= ro splash quiet nvme_core.default_ps_max_latency_us=0 DEEPIN_GFXMODE= [ 0.059301] Kernel command line: BOOT_IMAGE=/vmlinuz-6.12.20-amd64-desktop-rolling root=UUID= ro splash quiet nvme_core.default_ps_max_latency_us=0 DEEPIN_GFXMODE= [ 0.542430] nvme nvme0: pci function 0000:03:00.0 [ 0.560426] nvme nvme0: allocated 32 MiB host memory buffer. [ 0.562491] nvme nvme0: 16/0/0 default/read/poll queues [ 0.567764] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 6.388726] EXT4-fs (nvme0n1p7): mounted filesystem ro with ordered data mode. Quota mode: none. [ 6.893421] EXT4-fs (nvme0n1p7): re-mounted r/w. Quota mode: none. [ 7.125419] Adding 16777212k swap on /dev/nvme0n1p8. Priority:-2 extents:1 across:16777212k SS [ 7.157588] EXT4-fs (nvme0n1p6): mounted filesystem r/w with ordered data mode. Quota mode: none. [ 7.165021] EXT4-fs (nvme0n1p9): mounted filesystem r/w with ordered data mode. Quota mode: none. [ 8.036932] nvme nvme0: using unchecked data buffer [ 8.096023] block nvme0n1: No UUID available providing old NGUID

Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... Link: https://lore.kernel.org/all/20240422162822.3539156-1-sean.anderson@linux.dev... Reported-by: liaozw hedgehog-002@163.com Closes: https://bbs.deepin.org.cn/post/286300 Reported-by: rugk rugk+github@posteo.de Closes: https://bugzilla.kernel.org/show_bug.cgi?id=208123 Signed-off-by: Wentao Guan guanwentao@uniontech.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/pci.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 8eee28282b1e9..b6153f595076b 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3453,6 +3453,9 @@ static const struct pci_device_id nvme_id_table[] = { NVME_QUIRK_IGNORE_DEV_SUBNQN, }, { PCI_DEVICE(0x15b7, 0x5008), /* Sandisk SN530 */ .driver_data = NVME_QUIRK_BROKEN_MSI }, + { PCI_DEVICE(0x15b7, 0x5009), /* Sandisk SN550 */ + .driver_data = NVME_QUIRK_BROKEN_MSI | + NVME_QUIRK_NO_DEEPEST_PS }, { PCI_DEVICE(0x1987, 0x5012), /* Phison E12 */ .driver_data = NVME_QUIRK_BOGUS_NID, }, { PCI_DEVICE(0x1987, 0x5016), /* Phison E16 */

-- 2.39.5

Sasha Levin

9:36 p.m.

New subject: [PATCH AUTOSEL 6.6 09/12] nvmet-tcp: don't restore null sk_state_change

From: Alistair Francis alistair.francis@wdc.com

[ Upstream commit 46d22b47df2741996af277a2838b95f130436c13 ]

queue->state_change is set as part of nvmet_tcp_set_queue_sock(), but if the TCP connection isn't established when nvmet_tcp_set_queue_sock() is called then queue->state_change isn't set and sock->sk->sk_state_change isn't replaced.

As such we don't need to restore sock->sk->sk_state_change if queue->state_change is NULL.

This avoids NULL pointer dereferences such as this:

[ 286.462026][ C0] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 286.462814][ C0] #PF: supervisor instruction fetch in kernel mode [ 286.463796][ C0] #PF: error_code(0x0010) - not-present page [ 286.464392][ C0] PGD 8000000140620067 P4D 8000000140620067 PUD 114201067 PMD 0 [ 286.465086][ C0] Oops: Oops: 0010 [#1] SMP KASAN PTI [ 286.465559][ C0] CPU: 0 UID: 0 PID: 1628 Comm: nvme Not tainted 6.15.0-rc2+ #11 PREEMPT(voluntary) [ 286.466393][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [ 286.467147][ C0] RIP: 0010:0x0 [ 286.467420][ C0] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 286.467977][ C0] RSP: 0018:ffff8883ae008580 EFLAGS: 00010246 [ 286.468425][ C0] RAX: 0000000000000000 RBX: ffff88813fd34100 RCX: ffffffffa386cc43 [ 286.469019][ C0] RDX: 1ffff11027fa68b6 RSI: 0000000000000008 RDI: ffff88813fd34100 [ 286.469545][ C0] RBP: ffff88813fd34160 R08: 0000000000000000 R09: ffffed1027fa682c [ 286.470072][ C0] R10: ffff88813fd34167 R11: 0000000000000000 R12: ffff88813fd344c3 [ 286.470585][ C0] R13: ffff88813fd34112 R14: ffff88813fd34aec R15: ffff888132cdd268 [ 286.471070][ C0] FS: 00007fe3c04c7d80(0000) GS:ffff88840743f000(0000) knlGS:0000000000000000 [ 286.471644][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 286.472543][ C0] CR2: ffffffffffffffd6 CR3: 000000012daca000 CR4: 00000000000006f0 [ 286.473500][ C0] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 286.474467][ C0] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 [ 286.475453][ C0] Call Trace: [ 286.476102][ C0] <IRQ> [ 286.476719][ C0] tcp_fin+0x2bb/0x440 [ 286.477429][ C0] tcp_data_queue+0x190f/0x4e60 [ 286.478174][ C0] ? __build_skb_around+0x234/0x330 [ 286.478940][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.479659][ C0] ? __pfx_tcp_data_queue+0x10/0x10 [ 286.480431][ C0] ? tcp_try_undo_loss+0x640/0x6c0 [ 286.481196][ C0] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 286.482046][ C0] ? kvm_clock_get_cycles+0x14/0x30 [ 286.482769][ C0] ? ktime_get+0x66/0x150 [ 286.483433][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.484146][ C0] tcp_rcv_established+0x6e4/0x2050 [ 286.484857][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.485523][ C0] ? ipv4_dst_check+0x160/0x2b0 [ 286.486203][ C0] ? __pfx_tcp_rcv_established+0x10/0x10 [ 286.486917][ C0] ? lock_release+0x217/0x2c0 [ 286.487595][ C0] tcp_v4_do_rcv+0x4d6/0x9b0 [ 286.488279][ C0] tcp_v4_rcv+0x2af8/0x3e30 [ 286.488904][ C0] ? raw_local_deliver+0x51b/0xad0 [ 286.489551][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.490198][ C0] ? __pfx_tcp_v4_rcv+0x10/0x10 [ 286.490813][ C0] ? __pfx_raw_local_deliver+0x10/0x10 [ 286.491487][ C0] ? __pfx_nf_confirm+0x10/0x10 [nf_conntrack] [ 286.492275][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.492900][ C0] ip_protocol_deliver_rcu+0x8f/0x370 [ 286.493579][ C0] ip_local_deliver_finish+0x297/0x420 [ 286.494268][ C0] ip_local_deliver+0x168/0x430 [ 286.494867][ C0] ? __pfx_ip_local_deliver+0x10/0x10 [ 286.495498][ C0] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 286.496204][ C0] ? ip_rcv_finish_core+0x19a/0x1f20 [ 286.496806][ C0] ? lock_release+0x217/0x2c0 [ 286.497414][ C0] ip_rcv+0x455/0x6e0 [ 286.497945][ C0] ? __pfx_ip_rcv+0x10/0x10 [ 286.498550][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.499137][ C0] ? __pfx_ip_rcv_finish+0x10/0x10 [ 286.499763][ C0] ? lock_release+0x217/0x2c0 [ 286.500327][ C0] ? dl_scaled_delta_exec+0xd1/0x2c0 [ 286.500922][ C0] ? __pfx_ip_rcv+0x10/0x10 [ 286.501480][ C0] __netif_receive_skb_one_core+0x166/0x1b0 [ 286.502173][ C0] ? __pfx___netif_receive_skb_one_core+0x10/0x10 [ 286.502903][ C0] ? lock_acquire+0x2b2/0x310 [ 286.503487][ C0] ? process_backlog+0x372/0x1350 [ 286.504087][ C0] ? lock_release+0x217/0x2c0 [ 286.504642][ C0] process_backlog+0x3b9/0x1350 [ 286.505214][ C0] ? process_backlog+0x372/0x1350 [ 286.505779][ C0] __napi_poll.constprop.0+0xa6/0x490 [ 286.506363][ C0] net_rx_action+0x92e/0xe10 [ 286.506889][ C0] ? __pfx_net_rx_action+0x10/0x10 [ 286.507437][ C0] ? timerqueue_add+0x1f0/0x320 [ 286.507977][ C0] ? sched_clock_cpu+0x68/0x540 [ 286.508492][ C0] ? lock_acquire+0x2b2/0x310 [ 286.509043][ C0] ? kvm_sched_clock_read+0xd/0x20 [ 286.509607][ C0] ? handle_softirqs+0x1aa/0x7d0 [ 286.510187][ C0] handle_softirqs+0x1f2/0x7d0 [ 286.510754][ C0] ? __pfx_handle_softirqs+0x10/0x10 [ 286.511348][ C0] ? irqtime_account_irq+0x181/0x290 [ 286.511937][ C0] ? __dev_queue_xmit+0x85d/0x3450 [ 286.512510][ C0] do_softirq.part.0+0x89/0xc0 [ 286.513100][ C0] </IRQ> [ 286.513548][ C0] <TASK> [ 286.513953][ C0] __local_bh_enable_ip+0x112/0x140 [ 286.514522][ C0] ? __dev_queue_xmit+0x85d/0x3450 [ 286.515072][ C0] __dev_queue_xmit+0x872/0x3450 [ 286.515619][ C0] ? nft_do_chain+0xe16/0x15b0 [nf_tables] [ 286.516252][ C0] ? __pfx___dev_queue_xmit+0x10/0x10 [ 286.516817][ C0] ? selinux_ip_postroute+0x43c/0xc50 [ 286.517433][ C0] ? __pfx_selinux_ip_postroute+0x10/0x10 [ 286.518061][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.518606][ C0] ? ip_output+0x164/0x4a0 [ 286.519149][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.519671][ C0] ? ip_finish_output2+0x17d5/0x1fb0 [ 286.520258][ C0] ip_finish_output2+0xb4b/0x1fb0 [ 286.520787][ C0] ? __pfx_ip_finish_output2+0x10/0x10 [ 286.521355][ C0] ? __ip_finish_output+0x15d/0x750 [ 286.521890][ C0] ip_output+0x164/0x4a0 [ 286.522372][ C0] ? __pfx_ip_output+0x10/0x10 [ 286.522872][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.523402][ C0] ? _raw_spin_unlock_irqrestore+0x4c/0x60 [ 286.524031][ C0] ? __pfx_ip_finish_output+0x10/0x10 [ 286.524605][ C0] ? __ip_queue_xmit+0x999/0x2260 [ 286.525200][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.525744][ C0] ? ipv4_dst_check+0x16a/0x2b0 [ 286.526279][ C0] ? lock_release+0x217/0x2c0 [ 286.526793][ C0] __ip_queue_xmit+0x1883/0x2260 [ 286.527324][ C0] ? __skb_clone+0x54c/0x730 [ 286.527827][ C0] __tcp_transmit_skb+0x209b/0x37a0 [ 286.528374][ C0] ? __pfx___tcp_transmit_skb+0x10/0x10 [ 286.528952][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.529472][ C0] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 286.530152][ C0] ? trace_hardirqs_on+0x12/0x120 [ 286.530691][ C0] tcp_write_xmit+0xb81/0x88b0 [ 286.531224][ C0] ? mod_memcg_state+0x4d/0x60 [ 286.531736][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.532253][ C0] __tcp_push_pending_frames+0x90/0x320 [ 286.532826][ C0] tcp_send_fin+0x141/0xb50 [ 286.533352][ C0] ? __pfx_tcp_send_fin+0x10/0x10 [ 286.533908][ C0] ? __local_bh_enable_ip+0xab/0x140 [ 286.534495][ C0] inet_shutdown+0x243/0x320 [ 286.535077][ C0] nvme_tcp_alloc_queue+0xb3b/0x2590 [nvme_tcp] [ 286.535709][ C0] ? do_raw_spin_lock+0x129/0x260 [ 286.536314][ C0] ? __pfx_nvme_tcp_alloc_queue+0x10/0x10 [nvme_tcp] [ 286.536996][ C0] ? do_raw_spin_unlock+0x54/0x1e0 [ 286.537550][ C0] ? _raw_spin_unlock+0x29/0x50 [ 286.538127][ C0] ? do_raw_spin_lock+0x129/0x260 [ 286.538664][ C0] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 286.539249][ C0] ? nvme_tcp_alloc_admin_queue+0xd5/0x340 [nvme_tcp] [ 286.539892][ C0] ? __wake_up+0x40/0x60 [ 286.540392][ C0] nvme_tcp_alloc_admin_queue+0xd5/0x340 [nvme_tcp] [ 286.541047][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.541589][ C0] nvme_tcp_setup_ctrl+0x8b/0x7a0 [nvme_tcp] [ 286.542254][ C0] ? _raw_spin_unlock_irqrestore+0x4c/0x60 [ 286.542887][ C0] ? __pfx_nvme_tcp_setup_ctrl+0x10/0x10 [nvme_tcp] [ 286.543568][ C0] ? trace_hardirqs_on+0x12/0x120 [ 286.544166][ C0] ? _raw_spin_unlock_irqrestore+0x35/0x60 [ 286.544792][ C0] ? nvme_change_ctrl_state+0x196/0x2e0 [nvme_core] [ 286.545477][ C0] nvme_tcp_create_ctrl+0x839/0xb90 [nvme_tcp] [ 286.546126][ C0] nvmf_dev_write+0x3db/0x7e0 [nvme_fabrics] [ 286.546775][ C0] ? rw_verify_area+0x69/0x520 [ 286.547334][ C0] vfs_write+0x218/0xe90 [ 286.547854][ C0] ? do_syscall_64+0x9f/0x190 [ 286.548408][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120 [ 286.549037][ C0] ? syscall_exit_to_user_mode+0x93/0x280 [ 286.549659][ C0] ? __pfx_vfs_write+0x10/0x10 [ 286.550259][ C0] ? do_syscall_64+0x9f/0x190 [ 286.550840][ C0] ? syscall_exit_to_user_mode+0x8e/0x280 [ 286.551516][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120 [ 286.552180][ C0] ? syscall_exit_to_user_mode+0x93/0x280 [ 286.552834][ C0] ? ksys_read+0xf5/0x1c0 [ 286.553386][ C0] ? __pfx_ksys_read+0x10/0x10 [ 286.553964][ C0] ksys_write+0xf5/0x1c0 [ 286.554499][ C0] ? __pfx_ksys_write+0x10/0x10 [ 286.555072][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120 [ 286.555698][ C0] ? syscall_exit_to_user_mode+0x93/0x280 [ 286.556319][ C0] ? do_syscall_64+0x54/0x190 [ 286.556866][ C0] do_syscall_64+0x93/0x190 [ 286.557420][ C0] ? rcu_read_unlock+0x17/0x60 [ 286.557986][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.558526][ C0] ? lock_release+0x217/0x2c0 [ 286.559087][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.559659][ C0] ? count_memcg_events.constprop.0+0x4a/0x60 [ 286.560476][ C0] ? exc_page_fault+0x7a/0x110 [ 286.561064][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.561647][ C0] ? lock_release+0x217/0x2c0 [ 286.562257][ C0] ? do_user_addr_fault+0x171/0xa00 [ 286.562839][ C0] ? do_user_addr_fault+0x4a2/0xa00 [ 286.563453][ C0] ? irqentry_exit_to_user_mode+0x84/0x270 [ 286.564112][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.564677][ C0] ? irqentry_exit_to_user_mode+0x84/0x270 [ 286.565317][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120 [ 286.565922][ C0] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 286.566542][ C0] RIP: 0033:0x7fe3c05e6504 [ 286.567102][ C0] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d c5 8b 10 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 [ 286.568931][ C0] RSP: 002b:00007fff76444f58 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 286.569807][ C0] RAX: ffffffffffffffda RBX: 000000003b40d930 RCX: 00007fe3c05e6504 [ 286.570621][ C0] RDX: 00000000000000cf RSI: 000000003b40d930 RDI: 0000000000000003 [ 286.571443][ C0] RBP: 0000000000000003 R08: 00000000000000cf R09: 000000003b40d930 [ 286.572246][ C0] R10: 0000000000000000 R11: 0000000000000202 R12: 000000003b40cd60 [ 286.573069][ C0] R13: 00000000000000cf R14: 00007fe3c07417f8 R15: 00007fe3c073502e [ 286.573886][ C0] </TASK>

Closes: https://lore.kernel.org/linux-nvme/5hdonndzoqa265oq3bj6iarwtfk5dewxxjtbjvn5u... Signed-off-by: Alistair Francis alistair.francis@wdc.com Reviewed-by: Sagi Grimberg sagi@grimberg.me Tested-by: Shin'ichiro Kawasaki shinichiro.kawasaki@wdc.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/tcp.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c index a0af659a4c4a2..6a539c3b8b530 100644 --- a/drivers/nvme/target/tcp.c +++ b/drivers/nvme/target/tcp.c @@ -1456,6 +1456,9 @@ static void nvmet_tcp_restore_socket_callbacks(struct nvmet_tcp_queue *queue) { struct socket *sock = queue->sock;

+ if (!queue->state_change) + return; + write_lock_bh(&sock->sk->sk_callback_lock); sock->sk->sk_data_ready = queue->data_ready; sock->sk->sk_state_change = queue->state_change;

-- 2.39.5

Sasha Levin

9:36 p.m.

New subject: [PATCH AUTOSEL 6.6 10/12] io_uring/fdinfo: annotate racy sq/cq head/tail reads

From: Jens Axboe axboe@kernel.dk

[ Upstream commit f024d3a8ded0d8d2129ae123d7a5305c29ca44ce ]

syzbot complains about the cached sq head read, and it's totally right. But we don't need to care, it's just reading fdinfo, and reading the CQ or SQ tail/head entries are known racy in that they are just a view into that very instant and may of course be outdated by the time they are reported.

Annotate both the SQ head and CQ tail read with data_race() to avoid this syzbot complaint.

Link: https://lore.kernel.org/io-uring/6811f6dc.050a0220.39e3a1.0d0e.GAE@google.co... Reported-by: syzbot+3e77fd302e99f5af9394@syzkaller.appspotmail.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- io_uring/fdinfo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/io_uring/fdinfo.c b/io_uring/fdinfo.c index 976e9500f6518..a26cf840e623d 100644 --- a/io_uring/fdinfo.c +++ b/io_uring/fdinfo.c @@ -81,11 +81,11 @@ __cold void io_uring_show_fdinfo(struct seq_file *m, struct file *f) seq_printf(m, "SqMask:\t0x%x\n", sq_mask); seq_printf(m, "SqHead:\t%u\n", sq_head); seq_printf(m, "SqTail:\t%u\n", sq_tail); - seq_printf(m, "CachedSqHead:\t%u\n", ctx->cached_sq_head); + seq_printf(m, "CachedSqHead:\t%u\n", data_race(ctx->cached_sq_head)); seq_printf(m, "CqMask:\t0x%x\n", cq_mask); seq_printf(m, "CqHead:\t%u\n", cq_head); seq_printf(m, "CqTail:\t%u\n", cq_tail); - seq_printf(m, "CachedCqTail:\t%u\n", ctx->cached_cq_tail); + seq_printf(m, "CachedCqTail:\t%u\n", data_race(ctx->cached_cq_tail)); seq_printf(m, "SQEs:\t%u\n", sq_tail - sq_head); sq_entries = min(sq_tail - sq_head, ctx->sq_entries); for (i = 0; i < sq_entries; i++) {

-- 2.39.5

Sasha Levin

9:36 p.m.

New subject: [PATCH AUTOSEL 6.6 11/12] cifs: Fix and improve cifs_query_path_info() and cifs_query_file_info()

From: Pali Rohár pali@kernel.org

[ Upstream commit 1041c117a2c33cdffc4f695ac4b469e9124d24d5 ]

When CAP_NT_SMBS was not negotiated then do not issue CIFSSMBQPathInfo() and CIFSSMBQFileInfo() commands. CIFSSMBQPathInfo() is not supported by non-NT Win9x SMB server and CIFSSMBQFileInfo() returns from Win9x SMB server bogus data in Attributes field (for example lot of files are marked as reparse points, even Win9x does not support them and read-only bit is not marked for read-only files). Correct information is returned by CIFSFindFirst() or SMBQueryInformation() command.

So as a fallback in cifs_query_path_info() function use CIFSFindFirst() with SMB_FIND_FILE_FULL_DIRECTORY_INFO level which is supported by both NT and non-NT servers and as a last option use SMBQueryInformation() as it was before.

And in function cifs_query_file_info() immediately returns -EOPNOTSUPP when not communicating with NT server. Client then revalidate inode entry by the cifs_query_path_info() call, which is working fine. So fstat() syscall on already opened file will receive correct information.

Note that both fallback functions in non-UNICODE mode expands wildcards. Therefore those fallback functions cannot be used on paths which contain SMB wildcard characters (* ? " > <).

CIFSFindFirst() returns all 4 time attributes as opposite of SMBQueryInformation() which returns only one.

With this change it is possible to query all 4 times attributes from Win9x server and at the same time, client minimize sending of unsupported commands to server.

Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/smb1ops.c | 103 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 95 insertions(+), 8 deletions(-)

diff --git a/fs/smb/client/smb1ops.c b/fs/smb/client/smb1ops.c index caa1d852ece49..1ecb32186b06b 100644 --- a/fs/smb/client/smb1ops.c +++ b/fs/smb/client/smb1ops.c @@ -548,24 +548,104 @@ static int cifs_query_path_info(const unsigned int xid, const char *full_path, struct cifs_open_info_data *data) { - int rc; + int rc = -EOPNOTSUPP; FILE_ALL_INFO fi = {}; + struct cifs_search_info search_info = {}; + bool non_unicode_wildcard = false;

data->symlink = false; data->adjust_tz = false;

- /* could do find first instead but this returns more info */ - rc = CIFSSMBQPathInfo(xid, tcon, full_path, &fi, 0 /* not legacy */, cifs_sb->local_nls, - cifs_remap(cifs_sb)); /* - * BB optimize code so we do not make the above call when server claims - * no NT SMB support and the above call failed at least once - set flag - * in tcon or mount. + * First try CIFSSMBQPathInfo() function which returns more info + * (NumberOfLinks) than CIFSFindFirst() fallback function. + * Some servers like Win9x do not support SMB_QUERY_FILE_ALL_INFO over + * TRANS2_QUERY_PATH_INFORMATION, but supports it with filehandle over + * TRANS2_QUERY_FILE_INFORMATION (function CIFSSMBQFileInfo(). But SMB + * Open command on non-NT servers works only for files, does not work + * for directories. And moreover Win9x SMB server returns bogus data in + * SMB_QUERY_FILE_ALL_INFO Attributes field. So for non-NT servers, + * do not even use CIFSSMBQPathInfo() or CIFSSMBQFileInfo() function. + */ + if (tcon->ses->capabilities & CAP_NT_SMBS) + rc = CIFSSMBQPathInfo(xid, tcon, full_path, &fi, 0 /* not legacy */, + cifs_sb->local_nls, cifs_remap(cifs_sb)); + + /* + * Non-UNICODE variant of fallback functions below expands wildcards, + * so they cannot be used for querying paths with wildcard characters. */ - if ((rc == -EOPNOTSUPP) || (rc == -EINVAL)) { + if (rc && !(tcon->ses->capabilities & CAP_UNICODE) && strpbrk(full_path, "*?"><")) + non_unicode_wildcard = true; + + /* + * Then fallback to CIFSFindFirst() which works also with non-NT servers + * but does not does not provide NumberOfLinks. + */ + if ((rc == -EOPNOTSUPP || rc == -EINVAL) && + !non_unicode_wildcard) { + if (!(tcon->ses->capabilities & tcon->ses->server->vals->cap_nt_find)) + search_info.info_level = SMB_FIND_FILE_INFO_STANDARD; + else + search_info.info_level = SMB_FIND_FILE_FULL_DIRECTORY_INFO; + rc = CIFSFindFirst(xid, tcon, full_path, cifs_sb, NULL, + CIFS_SEARCH_CLOSE_ALWAYS | CIFS_SEARCH_CLOSE_AT_END, + &search_info, false); + if (rc == 0) { + if (!(tcon->ses->capabilities & tcon->ses->server->vals->cap_nt_find)) { + FIND_FILE_STANDARD_INFO *di; + int offset = tcon->ses->server->timeAdj; + + di = (FIND_FILE_STANDARD_INFO *)search_info.srch_entries_start; + fi.CreationTime = cpu_to_le64(cifs_UnixTimeToNT(cnvrtDosUnixTm( + di->CreationDate, di->CreationTime, offset))); + fi.LastAccessTime = cpu_to_le64(cifs_UnixTimeToNT(cnvrtDosUnixTm( + di->LastAccessDate, di->LastAccessTime, offset))); + fi.LastWriteTime = cpu_to_le64(cifs_UnixTimeToNT(cnvrtDosUnixTm( + di->LastWriteDate, di->LastWriteTime, offset))); + fi.ChangeTime = fi.LastWriteTime; + fi.Attributes = cpu_to_le32(le16_to_cpu(di->Attributes)); + fi.AllocationSize = cpu_to_le64(le32_to_cpu(di->AllocationSize)); + fi.EndOfFile = cpu_to_le64(le32_to_cpu(di->DataSize)); + } else { + FILE_FULL_DIRECTORY_INFO *di; + + di = (FILE_FULL_DIRECTORY_INFO *)search_info.srch_entries_start; + fi.CreationTime = di->CreationTime; + fi.LastAccessTime = di->LastAccessTime; + fi.LastWriteTime = di->LastWriteTime; + fi.ChangeTime = di->ChangeTime; + fi.Attributes = di->ExtFileAttributes; + fi.AllocationSize = di->AllocationSize; + fi.EndOfFile = di->EndOfFile; + fi.EASize = di->EaSize; + } + fi.NumberOfLinks = cpu_to_le32(1); + fi.DeletePending = 0; + fi.Directory = !!(le32_to_cpu(fi.Attributes) & ATTR_DIRECTORY); + cifs_buf_release(search_info.ntwrk_buf_start); + } else if (!full_path[0]) { + /* + * CIFSFindFirst() does not work on root path if the + * root path was exported on the server from the top + * level path (drive letter). + */ + rc = -EOPNOTSUPP; + } + } + + /* + * If everything failed then fallback to the legacy SMB command + * SMB_COM_QUERY_INFORMATION which works with all servers, but + * provide just few information. + */ + if ((rc == -EOPNOTSUPP || rc == -EINVAL) && !non_unicode_wildcard) { rc = SMBQueryInformation(xid, tcon, full_path, &fi, cifs_sb->local_nls, cifs_remap(cifs_sb)); data->adjust_tz = true; + } else if ((rc == -EOPNOTSUPP || rc == -EINVAL) && non_unicode_wildcard) { + /* Path with non-UNICODE wildcard character cannot exist. */ + rc = -ENOENT; }

if (!rc) { @@ -662,6 +742,13 @@ static int cifs_query_file_info(const unsigned int xid, struct cifs_tcon *tcon, int rc; FILE_ALL_INFO fi = {};

+ /* + * CIFSSMBQFileInfo() for non-NT servers returns bogus data in + * Attributes fields. So do not use this command for non-NT servers. + */ + if (!(tcon->ses->capabilities & CAP_NT_SMBS)) + return -EOPNOTSUPP; + if (cfile->symlink_target) { data->symlink_target = kstrdup(cfile->symlink_target, GFP_KERNEL); if (!data->symlink_target)

-- 2.39.5

Sasha Levin

9:36 p.m.

New subject: [PATCH AUTOSEL 6.6 12/12] cifs: Fix changing times and read-only attr over SMB1 smb_set_file_info() function

From: Pali Rohár pali@kernel.org

[ Upstream commit f122121796f91168d0894c2710b8dd71330a34f8 ]

Function CIFSSMBSetPathInfo() is not supported by non-NT servers and returns error. Fallback code via open filehandle and CIFSSMBSetFileInfo() does not work neither because CIFS_open() works also only on NT server.

Therefore currently the whole smb_set_file_info() function as a SMB1 callback for the ->set_file_info() does not work with older non-NT SMB servers, like Win9x and others.

This change implements fallback code in smb_set_file_info() which will works with any server and allows to change time values and also to set or clear read-only attributes.

To make existing fallback code via CIFSSMBSetFileInfo() working with also non-NT servers, it is needed to change open function from CIFS_open() (which is NT specific) to cifs_open_file() which works with any server (this is just a open wrapper function which choose the correct open function supported by the server).

CIFSSMBSetFileInfo() is working also on non-NT servers, but zero time values are not treated specially. So first it is needed to fill all time values if some of them are missing, via cifs_query_path_info() call.

There is another issue, opening file in write-mode (needed for changing attributes) is not possible when the file has read-only attribute set. The only option how to clear read-only attribute is via SMB_COM_SETATTR command. And opening directory is not possible neither and here the SMB_COM_SETATTR command is the only option how to change attributes. And CIFSSMBSetFileInfo() does not honor setting read-only attribute, so for setting is also needed to use SMB_COM_SETATTR command.

Existing code in cifs_query_path_info() is already using SMB_COM_GETATTR as a fallback code path (function SMBQueryInformation()), so introduce a new function SMBSetInformation which will implement SMB_COM_SETATTR command.

My testing showed that Windows XP SMB1 client is also using SMB_COM_SETATTR command for setting or clearing read-only attribute against non-NT server. So this can prove that this is the correct way how to do it.

With this change it is possible set all 4 time values and all attributes, including clearing and setting read-only bit on non-NT SMB servers. Tested against Win98 SMB1 server.

This change fixes "touch" command which was failing when called on existing file. And fixes also "chmod +w" and "chmod -w" commands which were also failing (as they are changing read-only attribute).

Note that this change depends on following change "cifs: Improve cifs_query_path_info() and cifs_query_file_info()" as it require to query all 4 time attribute values.

Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/cifspdu.h | 5 +- fs/smb/client/cifsproto.h | 4 ++ fs/smb/client/cifssmb.c | 57 +++++++++++++++++++ fs/smb/client/smb1ops.c | 112 +++++++++++++++++++++++++++++++++++--- 4 files changed, 166 insertions(+), 12 deletions(-)

diff --git a/fs/smb/client/cifspdu.h b/fs/smb/client/cifspdu.h index c46d418c1c0c3..ca33f6cd6a800 100644 --- a/fs/smb/client/cifspdu.h +++ b/fs/smb/client/cifspdu.h @@ -1226,10 +1226,9 @@ typedef struct smb_com_query_information_rsp { typedef struct smb_com_setattr_req { struct smb_hdr hdr; /* wct = 8 */ __le16 attr; - __le16 time_low; - __le16 time_high; + __le32 last_write_time; __le16 reserved[5]; /* must be zero */ - __u16 ByteCount; + __le16 ByteCount; __u8 BufferFormat; /* 4 = ASCII */ unsigned char fileName[]; } __attribute__((packed)) SETATTR_REQ; diff --git a/fs/smb/client/cifsproto.h b/fs/smb/client/cifsproto.h index 7f97e54686524..d6686f77d4175 100644 --- a/fs/smb/client/cifsproto.h +++ b/fs/smb/client/cifsproto.h @@ -395,6 +395,10 @@ extern int CIFSSMBQFSUnixInfo(const unsigned int xid, struct cifs_tcon *tcon); extern int CIFSSMBQFSPosixInfo(const unsigned int xid, struct cifs_tcon *tcon, struct kstatfs *FSData);

+extern int SMBSetInformation(const unsigned int xid, struct cifs_tcon *tcon, + const char *fileName, __le32 attributes, __le64 write_time, + const struct nls_table *nls_codepage, + struct cifs_sb_info *cifs_sb); extern int CIFSSMBSetPathInfo(const unsigned int xid, struct cifs_tcon *tcon, const char *fileName, const FILE_BASIC_INFO *data, const struct nls_table *nls_codepage, diff --git a/fs/smb/client/cifssmb.c b/fs/smb/client/cifssmb.c index 769950adb7763..b91184ebce02c 100644 --- a/fs/smb/client/cifssmb.c +++ b/fs/smb/client/cifssmb.c @@ -5157,6 +5157,63 @@ CIFSSMBSetFileSize(const unsigned int xid, struct cifs_tcon *tcon, return rc; }

+int +SMBSetInformation(const unsigned int xid, struct cifs_tcon *tcon, + const char *fileName, __le32 attributes, __le64 write_time, + const struct nls_table *nls_codepage, + struct cifs_sb_info *cifs_sb) +{ + SETATTR_REQ *pSMB; + SETATTR_RSP *pSMBr; + struct timespec64 ts; + int bytes_returned; + int name_len; + int rc; + + cifs_dbg(FYI, "In %s path %s\n", __func__, fileName); + +retry: + rc = smb_init(SMB_COM_SETATTR, 8, tcon, (void **) &pSMB, + (void **) &pSMBr); + if (rc) + return rc; + + if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) { + name_len = + cifsConvertToUTF16((__le16 *) pSMB->fileName, + fileName, PATH_MAX, nls_codepage, + cifs_remap(cifs_sb)); + name_len++; /* trailing null */ + name_len *= 2; + } else { + name_len = copy_path_name(pSMB->fileName, fileName); + } + /* Only few attributes can be set by this command, others are not accepted by Win9x. */ + pSMB->attr = cpu_to_le16(le32_to_cpu(attributes) & + (ATTR_READONLY | ATTR_HIDDEN | ATTR_SYSTEM | ATTR_ARCHIVE)); + /* Zero write time value (in both NT and SETATTR formats) means to not change it. */ + if (le64_to_cpu(write_time) != 0) { + ts = cifs_NTtimeToUnix(write_time); + pSMB->last_write_time = cpu_to_le32(ts.tv_sec); + } + pSMB->BufferFormat = 0x04; + name_len++; /* account for buffer type byte */ + inc_rfc1001_len(pSMB, (__u16)name_len); + pSMB->ByteCount = cpu_to_le16(name_len); + + rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB, + (struct smb_hdr *) pSMBr, &bytes_returned, 0); + if (rc) + cifs_dbg(FYI, "Send error in %s = %d\n", __func__, rc); + + cifs_buf_release(pSMB); + + if (rc == -EAGAIN) + goto retry; + + return rc; +} + /* Some legacy servers such as NT4 require that the file times be set on an open handle, rather than by pathname - this is awkward due to potential access conflicts on the open, but it is unavoidable for these diff --git a/fs/smb/client/smb1ops.c b/fs/smb/client/smb1ops.c index 1ecb32186b06b..5c5cd5e238272 100644 --- a/fs/smb/client/smb1ops.c +++ b/fs/smb/client/smb1ops.c @@ -919,6 +919,9 @@ smb_set_file_info(struct inode *inode, const char *full_path, struct cifs_fid fid; struct cifs_open_parms oparms; struct cifsFileInfo *open_file; + FILE_BASIC_INFO new_buf; + struct cifs_open_info_data query_data; + __le64 write_time = buf->LastWriteTime; struct cifsInodeInfo *cinode = CIFS_I(inode); struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); struct tcon_link *tlink = NULL; @@ -926,20 +929,58 @@ smb_set_file_info(struct inode *inode, const char *full_path,

/* if the file is already open for write, just use that fileid */ open_file = find_writable_file(cinode, FIND_WR_FSUID_ONLY); + if (open_file) { fid.netfid = open_file->fid.netfid; netpid = open_file->pid; tcon = tlink_tcon(open_file->tlink); - goto set_via_filehandle; + } else { + tlink = cifs_sb_tlink(cifs_sb); + if (IS_ERR(tlink)) { + rc = PTR_ERR(tlink); + tlink = NULL; + goto out; + } + tcon = tlink_tcon(tlink); }

- tlink = cifs_sb_tlink(cifs_sb); - if (IS_ERR(tlink)) { - rc = PTR_ERR(tlink); - tlink = NULL; - goto out; + /* + * Non-NT servers interprets zero time value in SMB_SET_FILE_BASIC_INFO + * over TRANS2_SET_FILE_INFORMATION as a valid time value. NT servers + * interprets zero time value as do not change existing value on server. + * API of ->set_file_info() callback expects that zero time value has + * the NT meaning - do not change. Therefore if server is non-NT and + * some time values in "buf" are zero, then fetch missing time values. + */ + if (!(tcon->ses->capabilities & CAP_NT_SMBS) && + (!buf->CreationTime || !buf->LastAccessTime || + !buf->LastWriteTime || !buf->ChangeTime)) { + rc = cifs_query_path_info(xid, tcon, cifs_sb, full_path, &query_data); + if (rc) { + if (open_file) { + cifsFileInfo_put(open_file); + open_file = NULL; + } + goto out; + } + /* + * Original write_time from buf->LastWriteTime is preserved + * as SMBSetInformation() interprets zero as do not change. + */ + new_buf = *buf; + buf = &new_buf; + if (!buf->CreationTime) + buf->CreationTime = query_data.fi.CreationTime; + if (!buf->LastAccessTime) + buf->LastAccessTime = query_data.fi.LastAccessTime; + if (!buf->LastWriteTime) + buf->LastWriteTime = query_data.fi.LastWriteTime; + if (!buf->ChangeTime) + buf->ChangeTime = query_data.fi.ChangeTime; } - tcon = tlink_tcon(tlink); + + if (open_file) + goto set_via_filehandle;

rc = CIFSSMBSetPathInfo(xid, tcon, full_path, buf, cifs_sb->local_nls, cifs_sb); @@ -960,8 +1001,45 @@ smb_set_file_info(struct inode *inode, const char *full_path, .fid = &fid, };

- cifs_dbg(FYI, "calling SetFileInfo since SetPathInfo for times not supported by this server\n"); - rc = CIFS_open(xid, &oparms, &oplock, NULL); + if (S_ISDIR(inode->i_mode) && !(tcon->ses->capabilities & CAP_NT_SMBS)) { + /* Opening directory path is not possible on non-NT servers. */ + rc = -EOPNOTSUPP; + } else { + /* + * Use cifs_open_file() instead of CIFS_open() as the + * cifs_open_file() selects the correct function which + * works also on non-NT servers. + */ + rc = cifs_open_file(xid, &oparms, &oplock, NULL); + /* + * Opening path for writing on non-NT servers is not + * possible when the read-only attribute is already set. + * Non-NT server in this case returns -EACCES. For those + * servers the only possible way how to clear the read-only + * bit is via SMB_COM_SETATTR command. + */ + if (rc == -EACCES && + (cinode->cifsAttrs & ATTR_READONLY) && + le32_to_cpu(buf->Attributes) != 0 && /* 0 = do not change attrs */ + !(le32_to_cpu(buf->Attributes) & ATTR_READONLY) && + !(tcon->ses->capabilities & CAP_NT_SMBS)) + rc = -EOPNOTSUPP; + } + + /* Fallback to SMB_COM_SETATTR command when absolutelty needed. */ + if (rc == -EOPNOTSUPP) { + cifs_dbg(FYI, "calling SetInformation since SetPathInfo for attrs/times not supported by this server\n"); + rc = SMBSetInformation(xid, tcon, full_path, + buf->Attributes != 0 ? buf->Attributes : cpu_to_le32(cinode->cifsAttrs), + write_time, + cifs_sb->local_nls, cifs_sb); + if (rc == 0) + cinode->cifsAttrs = le32_to_cpu(buf->Attributes); + else + rc = -EACCES; + goto out; + } + if (rc != 0) { if (rc == -EIO) rc = -EINVAL; @@ -969,6 +1047,7 @@ smb_set_file_info(struct inode *inode, const char *full_path, }

netpid = current->tgid; + cifs_dbg(FYI, "calling SetFileInfo since SetPathInfo for attrs/times not supported by this server\n");

set_via_filehandle: rc = CIFSSMBSetFileInfo(xid, tcon, buf, fid.netfid, netpid); @@ -979,6 +1058,21 @@ smb_set_file_info(struct inode *inode, const char *full_path, CIFSSMBClose(xid, tcon, fid.netfid); else cifsFileInfo_put(open_file); + + /* + * Setting the read-only bit is not honered on non-NT servers when done + * via open-semantics. So for setting it, use SMB_COM_SETATTR command. + * This command works only after the file is closed, so use it only when + * operation was called without the filehandle. + */ + if (open_file == NULL && + !(tcon->ses->capabilities & CAP_NT_SMBS) && + le32_to_cpu(buf->Attributes) & ATTR_READONLY) { + SMBSetInformation(xid, tcon, full_path, + buf->Attributes, + 0 /* do not change write time */, + cifs_sb->local_nls, cifs_sb); + } out: if (tlink != NULL) cifs_put_tlink(tlink);

-- 2.39.5

days inactive

days old

linux-stable-mirror@lists.linaro.org

11 comments

participants

tags (0)

participants (1)

Sasha Levin