Currently, due to the sequential use of min_t() and clamp_t() macros, in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic sets tx_max to 0. This is then used to allocate the data area of the SKB requested later in cdc_ncm_fill_tx_frame().
This does not cause an issue presently because when memory is allocated during initialisation phase of SKB creation, more memory (512b) is allocated than is required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b).
However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b).
Consequently the SKB bounds checking semantics fails and panics:
skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172 \ head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:<NULL>
------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106 <snip> Call Trace: <IRQ> skb_over_panic+0x2c/0x30 net/core/skbuff.c:115 skb_put+0x205/0x210 net/core/skbuff.c:1877 skb_put_zero include/linux/skbuff.h:2270 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline] cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293 cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514
By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX when not offered through the system provided params, we ensure enough data space is allocated to handle the CDC data, meaning no crash will occur.
Cc: stable@vger.kernel.org Cc: Oliver Neukum oliver@neukum.org Cc: "David S. Miller" davem@davemloft.net Cc: Jakub Kicinski kuba@kernel.org Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Fixes: 289507d3364f9 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Signed-off-by: Lee Jones lee.jones@linaro.org --- drivers/net/usb/cdc_ncm.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 24753a4da7e60..e303b522efb50 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -181,6 +181,8 @@ static u32 cdc_ncm_check_tx_max(struct usbnet *dev, u32 new_tx) min = ctx->max_datagram_size + ctx->max_ndp_size + sizeof(struct usb_cdc_ncm_nth32);
max = min_t(u32, CDC_NCM_NTB_MAX_SIZE_TX, le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize)); + if (max == 0) + max = CDC_NCM_NTB_MAX_SIZE_TX; /* dwNtbOutMaxSize not set */
/* some devices set dwNtbOutMaxSize too low for the above default */ min = min(min, max);
On Thu, 2 Dec 2021 14:34:37 +0000 Lee Jones wrote:
Currently, due to the sequential use of min_t() and clamp_t() macros, in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic sets tx_max to 0. This is then used to allocate the data area of the SKB requested later in cdc_ncm_fill_tx_frame().
This does not cause an issue presently because when memory is allocated during initialisation phase of SKB creation, more memory (512b) is allocated than is required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b).
However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b).
Consequently the SKB bounds checking semantics fails and panics:
skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172 \ head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:<NULL>
------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106
<snip> Call Trace: <IRQ> skb_over_panic+0x2c/0x30 net/core/skbuff.c:115 skb_put+0x205/0x210 net/core/skbuff.c:1877 skb_put_zero include/linux/skbuff.h:2270 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline] cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293 cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514
By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX when not offered through the system provided params, we ensure enough data space is allocated to handle the CDC data, meaning no crash will occur.
Cc: stable@vger.kernel.org Cc: Oliver Neukum oliver@neukum.org Cc: "David S. Miller" davem@davemloft.net Cc: Jakub Kicinski kuba@kernel.org Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Fixes: 289507d3364f9 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Signed-off-by: Lee Jones lee.jones@linaro.org
CC: bjorn@mork.no
Please make sure you CC the authors of all blamed commits as they are likely to have the most context.
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 24753a4da7e60..e303b522efb50 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -181,6 +181,8 @@ static u32 cdc_ncm_check_tx_max(struct usbnet *dev, u32 new_tx) min = ctx->max_datagram_size + ctx->max_ndp_size + sizeof(struct usb_cdc_ncm_nth32); max = min_t(u32, CDC_NCM_NTB_MAX_SIZE_TX, le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize));
- if (max == 0)
max = CDC_NCM_NTB_MAX_SIZE_TX; /* dwNtbOutMaxSize not set *//* some devices set dwNtbOutMaxSize too low for the above default */ min = min(min, max);
Hello Lee!
Jakub Kicinski kuba@kernel.org writes:
On Thu, 2 Dec 2021 14:34:37 +0000 Lee Jones wrote:
Currently, due to the sequential use of min_t() and clamp_t() macros, in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic sets tx_max to 0. This is then used to allocate the data area of the SKB requested later in cdc_ncm_fill_tx_frame().
This does not cause an issue presently because when memory is allocated during initialisation phase of SKB creation, more memory (512b) is allocated than is required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b).
However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b).
Consequently the SKB bounds checking semantics fails and panics:
skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172 \ head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:<NULL>
------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106
<snip> Call Trace: <IRQ> skb_over_panic+0x2c/0x30 net/core/skbuff.c:115 skb_put+0x205/0x210 net/core/skbuff.c:1877 skb_put_zero include/linux/skbuff.h:2270 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline] cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293 cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514
By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX when not offered through the system provided params, we ensure enough data space is allocated to handle the CDC data, meaning no crash will occur.
Just out of curiouslity: Is this a real device, or was this the result of fuzzing around?
Not that it matters - it's obviously a bug to fix in any case. Good catch!
(We probably have many more of the same, assuming the device presents semi-sane values in the NCM parameter struct)
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 24753a4da7e60..e303b522efb50 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -181,6 +181,8 @@ static u32 cdc_ncm_check_tx_max(struct usbnet *dev, u32 new_tx) min = ctx->max_datagram_size + ctx->max_ndp_size + sizeof(struct usb_cdc_ncm_nth32); max = min_t(u32, CDC_NCM_NTB_MAX_SIZE_TX, le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize));
- if (max == 0)
max = CDC_NCM_NTB_MAX_SIZE_TX; /* dwNtbOutMaxSize not set *//* some devices set dwNtbOutMaxSize too low for the above default */ min = min(min, max);
It's been a while since I looked at this, so excuse me if I read it wrongly. But I think we need to catch more illegal/impossible values than just zero here? Any buffer size which cannot hold a single datagram is pointless.
Trying to figure out what I possible meant to do with that
min = min(min, max);
I don't think it makes any sense? Does it? The "min" value we've carefully calculated allow one max sized datagram and headers. I don't think we should ever continue with a smaller buffer than that. Or are there cases where this is valid?
So that really should haven been catching this bug with a
max = max(min, max)
or maybe more readable
if (max < min) max = min
What do you think?
Bjørn
On Fri, 03 Dec 2021, Bjørn Mork wrote:
Hello Lee!
Jakub Kicinski kuba@kernel.org writes:
On Thu, 2 Dec 2021 14:34:37 +0000 Lee Jones wrote:
Currently, due to the sequential use of min_t() and clamp_t() macros, in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic sets tx_max to 0. This is then used to allocate the data area of the SKB requested later in cdc_ncm_fill_tx_frame().
This does not cause an issue presently because when memory is allocated during initialisation phase of SKB creation, more memory (512b) is allocated than is required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b).
However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b).
Consequently the SKB bounds checking semantics fails and panics:
skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172 \ head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:<NULL>
------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106
<snip> Call Trace: <IRQ> skb_over_panic+0x2c/0x30 net/core/skbuff.c:115 skb_put+0x205/0x210 net/core/skbuff.c:1877 skb_put_zero include/linux/skbuff.h:2270 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline] cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293 cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514
By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX when not offered through the system provided params, we ensure enough data space is allocated to handle the CDC data, meaning no crash will occur.
Just out of curiouslity: Is this a real device, or was this the result of fuzzing around?
This is the result of "fuzzing around" on qemu. :)
https://syzkaller.appspot.com/bug?extid=2c9b6751e87ab8706cb3
Not that it matters - it's obviously a bug to fix in any case. Good catch!
(We probably have many more of the same, assuming the device presents semi-sane values in the NCM parameter struct)
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 24753a4da7e60..e303b522efb50 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -181,6 +181,8 @@ static u32 cdc_ncm_check_tx_max(struct usbnet *dev, u32 new_tx) min = ctx->max_datagram_size + ctx->max_ndp_size + sizeof(struct usb_cdc_ncm_nth32); max = min_t(u32, CDC_NCM_NTB_MAX_SIZE_TX, le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize));
- if (max == 0)
max = CDC_NCM_NTB_MAX_SIZE_TX; /* dwNtbOutMaxSize not set *//* some devices set dwNtbOutMaxSize too low for the above default */ min = min(min, max);
It's been a while since I looked at this, so excuse me if I read it wrongly. But I think we need to catch more illegal/impossible values than just zero here? Any buffer size which cannot hold a single datagram is pointless.
Trying to figure out what I possible meant to do with that
min = min(min, max);
I don't think it makes any sense? Does it? The "min" value we've carefully calculated allow one max sized datagram and headers. I don't think we should ever continue with a smaller buffer than that
I was more confused with the comment you added to that code:
/* some devices set dwNtbOutMaxSize too low for the above default */ min = min(min, max);
... which looks as though it should solve the issue of an inadequate dwNtbOutMaxSize, but it almost does the opposite. I initially changed this segment to use the max() macro instead, but the subsequent clamp_t() macro simply chooses 'max' (0) value over the now sane 'min' one.
Which is why I chose
Or are there cases where this is valid?
I'm not an expert on the SKB code, but in my simple view of the world, if you wish to use a buffer for any amount of data, you should allocate space for it.
So that really should haven been catching this bug with a
max = max(min, max)
I tried this. It didn't work either.
See the subsequent clamp_t() call a few lines down.
or maybe more readable
if (max < min) max = min
What do you think?
So the data that is added to the SKB is ctx->max_ndp_size, which is allocated in cdc_ncm_init(). The code that does it looks like:
if (ctx->is_ndp16) ctx->max_ndp_size = sizeof(struct usb_cdc_ncm_ndp16) + (ctx->tx_max_datagrams + 1) * sizeof(struct usb_cdc_ncm_dpe16); else ctx->max_ndp_size = sizeof(struct usb_cdc_ncm_ndp32) + (ctx->tx_max_datagrams + 1) * sizeof(struct usb_cdc_ncm_dpe32);
So this should be the size of the allocation too, right?
Why would the platform ever need to over-ride this? The platform can't make the data area smaller since there won't be enough room. It could perhaps make it bigger, but the min_t() and clamp_t() macros will end up choosing the above allocation anyway.
This leaves me feeling a little perplexed.
If there isn't a good reason for over-riding then I could simplify cdc_ncm_check_tx_max() greatly.
What do *you* think? :)
Lee Jones lee.jones@linaro.org writes:
On Fri, 03 Dec 2021, Bjørn Mork wrote:
Just out of curiouslity: Is this a real device, or was this the result of fuzzing around?
This is the result of "fuzzing around" on qemu. :)
https://syzkaller.appspot.com/bug?extid=2c9b6751e87ab8706cb3
OK. Makes sense. I'd be surprised of such a device worked on that other OS.
Not that it matters - it's obviously a bug to fix in any case. Good catch!
(We probably have many more of the same, assuming the device presents semi-sane values in the NCM parameter struct)
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 24753a4da7e60..e303b522efb50 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -181,6 +181,8 @@ static u32 cdc_ncm_check_tx_max(struct usbnet *dev, u32 new_tx) min = ctx->max_datagram_size + ctx->max_ndp_size + sizeof(struct usb_cdc_ncm_nth32); max = min_t(u32, CDC_NCM_NTB_MAX_SIZE_TX, le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize));
- if (max == 0)
max = CDC_NCM_NTB_MAX_SIZE_TX; /* dwNtbOutMaxSize not set *//* some devices set dwNtbOutMaxSize too low for the above default */ min = min(min, max);
It's been a while since I looked at this, so excuse me if I read it wrongly. But I think we need to catch more illegal/impossible values than just zero here? Any buffer size which cannot hold a single datagram is pointless.
Trying to figure out what I possible meant to do with that
min = min(min, max);
I don't think it makes any sense? Does it? The "min" value we've carefully calculated allow one max sized datagram and headers. I don't think we should ever continue with a smaller buffer than that
I was more confused with the comment you added to that code:
/* some devices set dwNtbOutMaxSize too low for the above default */ min = min(min, max);
... which looks as though it should solve the issue of an inadequate dwNtbOutMaxSize, but it almost does the opposite.
That's what I read too. I must admit that I cannot remember writing any of this stuff. But I trust git...
I initially changed this segment to use the max() macro instead, but the subsequent clamp_t() macro simply chooses 'max' (0) value over the now sane 'min' one.
Yes, but what if we adjust max here instead of min?
Which is why I chose
Or are there cases where this is valid?
I'm not an expert on the SKB code, but in my simple view of the world, if you wish to use a buffer for any amount of data, you should allocate space for it.
So that really should haven been catching this bug with a
max = max(min, max)
I tried this. It didn't work either.
See the subsequent clamp_t() call a few lines down.
This I don't understand. If we have for example
new_tx = 0 max = 0 min = 1514(=datagram) + 8(=ndp) + 2(=1+1) * 4(=dpe) + 12(=nth) = 1542
then
max = max(min, max) = 1542 val = clamp_t(u32, new_tx, min, max) = 1542
so we return 1542 and everything is fine.
or maybe more readable
if (max < min) max = min
What do you think?
So the data that is added to the SKB is ctx->max_ndp_size, which is allocated in cdc_ncm_init(). The code that does it looks like:
if (ctx->is_ndp16) ctx->max_ndp_size = sizeof(struct usb_cdc_ncm_ndp16) + (ctx->tx_max_datagrams + 1) * sizeof(struct usb_cdc_ncm_dpe16); else ctx->max_ndp_size = sizeof(struct usb_cdc_ncm_ndp32) + (ctx->tx_max_datagrams + 1) * sizeof(struct usb_cdc_ncm_dpe32);
So this should be the size of the allocation too, right?
This driver doesn't add data to the skb. It allocates a new buffer and copies one or more skbs into it. I'm sure that could be improved too..
Without a complete rewrite we need to allocate new skbs large enough to hold
NTH - frame header NDP x 1 - index table, with minimum two entries (1 datagram + terminator) datagram x 1 - ethernet frame
This gives the minimum "tx_max" value.
The device is supposed to tell us the maximum "tx_max" value in dwNtbOutMaxSize. In theory. In practice we cannot trust the device, as you point out. We know aleady deal with too large values (which are commonly seen in real products), but we also need to deal with too low values.
I believe the "too low" is defined by the calculated minimum value, and the comment indicates that this what I tried to express but failed.
Why would the platform ever need to over-ride this? The platform can't make the data area smaller since there won't be enough room. It could perhaps make it bigger, but the min_t() and clamp_t() macros will end up choosing the above allocation anyway.
This leaves me feeling a little perplexed.
If there isn't a good reason for over-riding then I could simplify cdc_ncm_check_tx_max() greatly.
What do *you* think? :)
I also have the feeling that this could and should be simplified. This discussion shows that refactoring is required. git blame makes this all too embarrassing ;-)
Bjørn
On Fri, 03 Dec 2021, Bjørn Mork wrote:
It's been a while since I looked at this, so excuse me if I read it wrongly. But I think we need to catch more illegal/impossible values than just zero here? Any buffer size which cannot hold a single datagram is pointless.
Trying to figure out what I possible meant to do with that
min = min(min, max);
I don't think it makes any sense? Does it? The "min" value we've carefully calculated allow one max sized datagram and headers. I don't think we should ever continue with a smaller buffer than that
I was more confused with the comment you added to that code:
/* some devices set dwNtbOutMaxSize too low for the above default */ min = min(min, max);
... which looks as though it should solve the issue of an inadequate dwNtbOutMaxSize, but it almost does the opposite.
That's what I read too. I must admit that I cannot remember writing any of this stuff. But I trust git...
In Git we trust!
I initially changed this segment to use the max() macro instead, but the subsequent clamp_t() macro simply chooses 'max' (0) value over the now sane 'min' one.
Yes, but what if we adjust max here instead of min?
That's what my patch does.
Which is why I chose
Or are there cases where this is valid?
I'm not an expert on the SKB code, but in my simple view of the world, if you wish to use a buffer for any amount of data, you should allocate space for it.
So that really should haven been catching this bug with a
max = max(min, max)
I tried this. It didn't work either.
See the subsequent clamp_t() call a few lines down.
This I don't understand. If we have for example
new_tx = 0 max = 0 min = 1514(=datagram) + 8(=ndp) + 2(=1+1) * 4(=dpe) + 12(=nth) = 1542
then
max = max(min, max) = 1542 val = clamp_t(u32, new_tx, min, max) = 1542
so we return 1542 and everything is fine.
I don't believe so.
#define clamp_t(type, val, lo, hi) \ min_t(type, max_t(type, val, lo), hi)
So: min_t(u32, max_t(u32, 0, 1542), 0)
So: min_t(u32, 1542, 0) = 0
So we return 0 and everything is not fine. :)
Perhaps we should use max_t() here instead of clamp?
or maybe more readable
if (max < min) max = min
What do you think?
So the data that is added to the SKB is ctx->max_ndp_size, which is allocated in cdc_ncm_init(). The code that does it looks like:
if (ctx->is_ndp16) ctx->max_ndp_size = sizeof(struct usb_cdc_ncm_ndp16) + (ctx->tx_max_datagrams + 1) * sizeof(struct usb_cdc_ncm_dpe16); else ctx->max_ndp_size = sizeof(struct usb_cdc_ncm_ndp32) + (ctx->tx_max_datagrams + 1) * sizeof(struct usb_cdc_ncm_dpe32);
So this should be the size of the allocation too, right?
This driver doesn't add data to the skb. It allocates a new buffer and copies one or more skbs into it. I'm sure that could be improved too..
"one or more skbs" == data :)
Either way, it's asking for more bits to be copied in than there is space for. It's amazing that this worked at all. We only noticed it when we increased the size of one of the SKB headers and some of the accidentally allocated memory was eaten up.
Without a complete rewrite we need to allocate new skbs large enough to hold
NTH - frame header NDP x 1 - index table, with minimum two entries (1 datagram + terminator) datagram x 1 - ethernet frame
This gives the minimum "tx_max" value.
The device is supposed to tell us the maximum "tx_max" value in dwNtbOutMaxSize. In theory. In practice we cannot trust the device, as you point out. We know aleady deal with too large values (which are commonly seen in real products), but we also need to deal with too low values.
I believe the "too low" is defined by the calculated minimum value, and the comment indicates that this what I tried to express but failed.
Right, that's how I read it too.
Why would the platform ever need to over-ride this? The platform can't make the data area smaller since there won't be enough room. It could perhaps make it bigger, but the min_t() and clamp_t() macros will end up choosing the above allocation anyway.
This leaves me feeling a little perplexed.
If there isn't a good reason for over-riding then I could simplify cdc_ncm_check_tx_max() greatly.
What do *you* think? :)
I also have the feeling that this could and should be simplified. This discussion shows that refactoring is required.
I'm happy to help with the coding, if we agree on a solution.
git blame makes this all too embarrassing ;-)
:D
Lee Jones lee.jones@linaro.org writes:
On Fri, 03 Dec 2021, Bjørn Mork wrote:
This I don't understand. If we have for example
new_tx = 0 max = 0 min = 1514(=datagram) + 8(=ndp) + 2(=1+1) * 4(=dpe) + 12(=nth) = 1542
then
max = max(min, max) = 1542 val = clamp_t(u32, new_tx, min, max) = 1542
so we return 1542 and everything is fine.
I don't believe so.
#define clamp_t(type, val, lo, hi) \ min_t(type, max_t(type, val, lo), hi)
So: min_t(u32, max_t(u32, 0, 1542), 0)
I don't think so. If we have:
new_tx = 0 max = 0 min = 1514(=datagram) + 8(=ndp) + 2(=1+1) * 4(=dpe) + 12(=nth) = 1542 max = max(min, max) = 1542
Then we have
min_t(u32, max_t(u32, 0, 1542), 1542)
If it wasn't clear - My proposal was to change this:
- min = min(min, max); + max = max(min, max);
in the original code.
But looking further I don't think that's a good idea either. I searched through old email and found this commit:
commit a6fe67087d7cb916e41b4ad1b3a57c91150edb88 Author: Bjørn Mork bjorn@mork.no Date: Fri Nov 1 11:17:01 2013 +0100
net: cdc_ncm: no not set tx_max higher than the device supports
There are MBIM devices out there reporting
dwNtbInMaxSize=2048 dwNtbOutMaxSize=2048
and since the spec require a datagram max size of at least 2048, this means that a full sized datagram will never fit.
Still, sending larger NTBs than the device supports is not going to help. We do not have any other options than either a) refusing to bindi, or b) respect the insanely low value.
Alternative b will at least make these devices work, so go for it.
Cc: Alexey Orishko alexey.orishko@gmail.com Signed-off-by: Bjørn Mork bjorn@mork.no Signed-off-by: David S. Miller davem@davemloft.net
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 4531f38fc0e5..11c703337577 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -159,8 +159,7 @@ static u8 cdc_ncm_setup(struct usbnet *dev) }
/* verify maximum size of transmitted NTB in bytes */ - if ((ctx->tx_max < (CDC_NCM_MIN_HDR_SIZE + ctx->max_datagram_size)) || - (ctx->tx_max > CDC_NCM_NTB_MAX_SIZE_TX)) { + if (ctx->tx_max > CDC_NCM_NTB_MAX_SIZE_TX) { dev_dbg(&dev->intf->dev, "Using default maximum transmit length=%d\n", CDC_NCM_NTB_MAX_SIZE_TX); ctx->tx_max = CDC_NCM_NTB_MAX_SIZE_TX;
So there are real devices depending on a dwNtbOutMaxSize which is too low. Our calculated minimum for MBIM will not fit.
So let's go back your original test for zero. It's better than nothing. I'll just ack that.
Perhaps we should use max_t() here instead of clamp?
No. That would allow userspace to set an unlimited buffer size.
Bjørn
On Fri, 03 Dec 2021, Bjørn Mork wrote:
Lee Jones lee.jones@linaro.org writes:
On Fri, 03 Dec 2021, Bjørn Mork wrote:
This I don't understand. If we have for example
new_tx = 0 max = 0 min = 1514(=datagram) + 8(=ndp) + 2(=1+1) * 4(=dpe) + 12(=nth) = 1542
then
max = max(min, max) = 1542 val = clamp_t(u32, new_tx, min, max) = 1542
so we return 1542 and everything is fine.
I don't believe so.
#define clamp_t(type, val, lo, hi) \ min_t(type, max_t(type, val, lo), hi)
So: min_t(u32, max_t(u32, 0, 1542), 0)
I don't think so. If we have:
new_tx = 0 max = 0 min = 1514(=datagram) + 8(=ndp) + 2(=1+1) * 4(=dpe) + 12(=nth) = 1542 max = max(min, max) = 1542
Then we have
min_t(u32, max_t(u32, 0, 1542), 1542)
If it wasn't clear - My proposal was to change this:
- min = min(min, max);
- max = max(min, max);
in the original code.
Oh, I see. Yes, I missed the reallocation of 'max'.
I thought we were using original values and just changing min() to max().
But looking further I don't think that's a good idea either. I searched through old email and found this commit:
commit a6fe67087d7cb916e41b4ad1b3a57c91150edb88 Author: Bjørn Mork bjorn@mork.no Date: Fri Nov 1 11:17:01 2013 +0100
net: cdc_ncm: no not set tx_max higher than the device supportsThere are MBIM devices out there reporting dwNtbInMaxSize=2048 dwNtbOutMaxSize=2048 and since the spec require a datagram max size of at least 2048, this means that a full sized datagram will never fit. Still, sending larger NTBs than the device supports is not going to help. We do not have any other options than either a) refusing to bindi, or b) respect the insanely low value. Alternative b will at least make these devices work, so go for it. Cc: Alexey Orishko alexey.orishko@gmail.com Signed-off-by: Bjørn Mork bjorn@mork.no Signed-off-by: David S. Miller davem@davemloft.net
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 4531f38fc0e5..11c703337577 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -159,8 +159,7 @@ static u8 cdc_ncm_setup(struct usbnet *dev) } /* verify maximum size of transmitted NTB in bytes */
if ((ctx->tx_max < (CDC_NCM_MIN_HDR_SIZE + ctx->max_datagram_size)) ||(ctx->tx_max > CDC_NCM_NTB_MAX_SIZE_TX)) {
if (ctx->tx_max > CDC_NCM_NTB_MAX_SIZE_TX) { dev_dbg(&dev->intf->dev, "Using default maximum transmit length=%d\n", CDC_NCM_NTB_MAX_SIZE_TX); ctx->tx_max = CDC_NCM_NTB_MAX_SIZE_TX;So there are real devices depending on a dwNtbOutMaxSize which is too low. Our calculated minimum for MBIM will not fit.
So let's go back your original test for zero. It's better than nothing. I'll just ack that.
Sure, no problem.
Thanks for conversing with me.
Perhaps we should use max_t() here instead of clamp?
No. That would allow userspace to set an unlimited buffer size.
Right, I see.
Lee Jones lee.jones@linaro.org writes:
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 24753a4da7e60..e303b522efb50 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -181,6 +181,8 @@ static u32 cdc_ncm_check_tx_max(struct usbnet *dev, u32 new_tx) min = ctx->max_datagram_size + ctx->max_ndp_size + sizeof(struct usb_cdc_ncm_nth32); max = min_t(u32, CDC_NCM_NTB_MAX_SIZE_TX, le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize));
- if (max == 0)
max = CDC_NCM_NTB_MAX_SIZE_TX; /* dwNtbOutMaxSize not set *//* some devices set dwNtbOutMaxSize too low for the above default */ min = min(min, max);
I believe this is the best possible fix, considering the regressions anything stricter might cause.
We know of at least one MBIM device where dwNtbOutMaxSize is as low as 2048.
According to the MBIM spec, the minimum and default value for wMaxSegmentSize is also 2048. This implies that the calculated "min" value is at least 2076, which is why we need that odd looking
min = min(min, max);
So let's just fix this specific zero case without breaking the non-conforming devices.
Reviewed-by: Bjørn Mork bjorn@mork.no
On Fri, 03 Dec 2021 15:52:48 +0100 Bjørn Mork wrote:
Lee Jones lee.jones@linaro.org writes:
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 24753a4da7e60..e303b522efb50 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -181,6 +181,8 @@ static u32 cdc_ncm_check_tx_max(struct usbnet *dev, u32 new_tx) min = ctx->max_datagram_size + ctx->max_ndp_size + sizeof(struct usb_cdc_ncm_nth32); max = min_t(u32, CDC_NCM_NTB_MAX_SIZE_TX, le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize));
- if (max == 0)
max = CDC_NCM_NTB_MAX_SIZE_TX; /* dwNtbOutMaxSize not set *//* some devices set dwNtbOutMaxSize too low for the above default */ min = min(min, max);
I believe this is the best possible fix, considering the regressions anything stricter might cause.
We know of at least one MBIM device where dwNtbOutMaxSize is as low as 2048.
According to the MBIM spec, the minimum and default value for wMaxSegmentSize is also 2048. This implies that the calculated "min" value is at least 2076, which is why we need that odd looking
min = min(min, max);
So let's just fix this specific zero case without breaking the non-conforming devices.
Reviewed-by: Bjørn Mork bjorn@mork.no
Applied to net, thanks!
Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled.
For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d16a084 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero")
Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b).
However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b).
Consequently the SKB bounds checking semantics fails and panics:
skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace: <TASK> skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100
Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE.
Fixes: 289507d3364f ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Cc: stable@vger.kernel.org Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/ Signed-off-by: Tudor Ambarus tudor.ambarus@linaro.org --- drivers/net/usb/cdc_ncm.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 6ce8f4f0c70e..db05622f1f70 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -181,9 +181,12 @@ static u32 cdc_ncm_check_tx_max(struct usbnet *dev, u32 new_tx) else min = ctx->max_datagram_size + ctx->max_ndp_size + sizeof(struct usb_cdc_ncm_nth32);
- max = min_t(u32, CDC_NCM_NTB_MAX_SIZE_TX, le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize)); - if (max == 0) + if (le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize) == 0) max = CDC_NCM_NTB_MAX_SIZE_TX; /* dwNtbOutMaxSize not set */ + else + max = clamp_t(u32, le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize), + USB_CDC_NCM_NTB_MIN_OUT_SIZE, + CDC_NCM_NTB_MAX_SIZE_TX);
/* some devices set dwNtbOutMaxSize too low for the above default */ min = min(min, max); @@ -1244,6 +1247,9 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign) * further. */ if (skb_out == NULL) { + /* If even the smallest allocation fails, abort. */ + if (ctx->tx_curr_size == USB_CDC_NCM_NTB_MIN_OUT_SIZE) + goto alloc_failed; ctx->tx_low_mem_max_cnt = min(ctx->tx_low_mem_max_cnt + 1, (unsigned)CDC_NCM_LOW_MEM_MAX_CNT); ctx->tx_low_mem_val = ctx->tx_low_mem_max_cnt; @@ -1262,13 +1268,8 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign) skb_out = alloc_skb(ctx->tx_curr_size, GFP_ATOMIC);
/* No allocation possible so we will abort */ - if (skb_out == NULL) { - if (skb != NULL) { - dev_kfree_skb_any(skb); - dev->net->stats.tx_dropped++; - } - goto exit_no_skb; - } + if (!skb_out) + goto alloc_failed; ctx->tx_low_mem_val--; } if (ctx->is_ndp16) { @@ -1461,6 +1462,11 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign)
return skb_out;
+alloc_failed: + if (skb) { + dev_kfree_skb_any(skb); + dev->net->stats.tx_dropped++; + } exit_no_skb: /* Start timer, if there is a remaining non-empty skb */ if (ctx->tx_curr_skb != NULL && n > 0)
Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled.
For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d16a084 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero")
Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b).
However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b).
Consequently the SKB bounds checking semantics fails and panics:
skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace: <TASK> skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100
Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE.
Fixes: 289507d3364f ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Cc: stable@vger.kernel.org Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/ Signed-off-by: Tudor Ambarus tudor.ambarus@linaro.org --- drivers/net/usb/cdc_ncm.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 6ce8f4f0c70e..db05622f1f70 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -181,9 +181,12 @@ static u32 cdc_ncm_check_tx_max(struct usbnet *dev, u32 new_tx) else min = ctx->max_datagram_size + ctx->max_ndp_size + sizeof(struct usb_cdc_ncm_nth32);
- max = min_t(u32, CDC_NCM_NTB_MAX_SIZE_TX, le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize)); - if (max == 0) + if (le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize) == 0) max = CDC_NCM_NTB_MAX_SIZE_TX; /* dwNtbOutMaxSize not set */ + else + max = clamp_t(u32, le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize), + USB_CDC_NCM_NTB_MIN_OUT_SIZE, + CDC_NCM_NTB_MAX_SIZE_TX);
/* some devices set dwNtbOutMaxSize too low for the above default */ min = min(min, max); @@ -1244,6 +1247,9 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign) * further. */ if (skb_out == NULL) { + /* If even the smallest allocation fails, abort. */ + if (ctx->tx_curr_size == USB_CDC_NCM_NTB_MIN_OUT_SIZE) + goto alloc_failed; ctx->tx_low_mem_max_cnt = min(ctx->tx_low_mem_max_cnt + 1, (unsigned)CDC_NCM_LOW_MEM_MAX_CNT); ctx->tx_low_mem_val = ctx->tx_low_mem_max_cnt; @@ -1262,13 +1268,8 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign) skb_out = alloc_skb(ctx->tx_curr_size, GFP_ATOMIC);
/* No allocation possible so we will abort */ - if (skb_out == NULL) { - if (skb != NULL) { - dev_kfree_skb_any(skb); - dev->net->stats.tx_dropped++; - } - goto exit_no_skb; - } + if (!skb_out) + goto alloc_failed; ctx->tx_low_mem_val--; } if (ctx->is_ndp16) { @@ -1461,6 +1462,11 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign)
return skb_out;
+alloc_failed: + if (skb) { + dev_kfree_skb_any(skb); + dev->net->stats.tx_dropped++; + } exit_no_skb: /* Start timer, if there is a remaining non-empty skb */ if (ctx->tx_curr_skb != NULL && n > 0)
On Wed, May 17, 2023 at 01:38:08PM +0000, Tudor Ambarus wrote:
Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled.
For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d16a084 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero")
Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b).
However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b).
Consequently the SKB bounds checking semantics fails and panics:
skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace:
<TASK> skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100
Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE.
Fixes: 289507d3364f ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Cc: stable@vger.kernel.org Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/ Signed-off-by: Tudor Ambarus tudor.ambarus@linaro.org
Reviewed-by: Simon Horman simon.horman@corigine.com
Hello:
This patch was applied to netdev/net.git (main) by Jakub Kicinski kuba@kernel.org:
On Wed, 17 May 2023 13:38:08 +0000 you wrote:
Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled.
For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d16a084 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero")
[...]
Here is the summary with links: - net: cdc_ncm: Deal with too low values of dwNtbOutMaxSize https://git.kernel.org/netdev/net/c/7e01c7f7046e
You are awesome, thank you!
linux-stable-mirror@lists.linaro.org
-
Bjørn Mork -
Jakub Kicinski -
Lee Jones -
patchwork-bot+netdevbpf＠kernel.org -
Simon Horman -
Tudor Ambarus