On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with sm712fb framebuffer driver would cause a white screen of death on the next POST, presumably the proper timings for the LCD panel was not reprogrammed properly by the BIOS.

Experiments showed a few CRTC Scratch Registers, including CRT3D, CRT3E and CRT3F may be used internally by BIOS as some flags. CRT3B is a hardware testing register, we shouldn't mess with it. CRT3C has blanking signal and line compare control, which is not needed for this driver.

Stop writing to CR3B-CR3F (a.k.a CRT3B-CRT3F) registers. Even if these registers don't have side-effect on other systems, writing to them is also highly questionable.

Signed-off-by: Yifeng Li tomli@tomli.me Cc: stable@vger.kernel.org # v4.4+ --- drivers/video/fbdev/sm712fb.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/sm712fb.c b/drivers/video/fbdev/sm712fb.c index 502d0de2feec..d05379affa32 100644 --- a/drivers/video/fbdev/sm712fb.c +++ b/drivers/video/fbdev/sm712fb.c @@ -1171,8 +1171,12 @@ static void sm7xx_set_timing(struct smtcfb_info *sfb) smtc_crtcw(i, vgamode[j].init_cr00_cr18[i]);

/* init CRTC register CR30 - CR4D */ - for (i = 0; i < SIZE_CR30_CR4D; i++) + for (i = 0; i < SIZE_CR30_CR4D; i++) { + if ((i + 0x30) >= 0x3B && (i + 0x30) <= 0x3F) + /* side-effect, don't write to CR3B-CR3F */ + continue; smtc_crtcw(i + 0x30, vgamode[j].init_cr30_cr4d[i]); + }

/* init CRTC register CR90 - CRA7 */ for (i = 0; i < SIZE_CR90_CRA7; i++)