4.14-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 30efae3d789cd0714ef795545a46749236e29558 ]

While there are issues related to object lifetime management, unregister the media device first when the driver is being unbound. This is slightly safer.

Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/omap3isp/isp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c index 6e6e978263b0..c834fea5f9b0 100644 --- a/drivers/media/platform/omap3isp/isp.c +++ b/drivers/media/platform/omap3isp/isp.c @@ -1592,6 +1592,8 @@ static void isp_pm_complete(struct device *dev)

static void isp_unregister_entities(struct isp_device *isp) { + media_device_unregister(&isp->media_dev); + omap3isp_csi2_unregister_entities(&isp->isp_csi2a); omap3isp_ccp2_unregister_entities(&isp->isp_ccp2); omap3isp_ccdc_unregister_entities(&isp->isp_ccdc); @@ -1602,7 +1604,6 @@ static void isp_unregister_entities(struct isp_device *isp) omap3isp_stat_unregister_entities(&isp->isp_hist);

v4l2_device_unregister(&isp->v4l2_dev); - media_device_unregister(&isp->media_dev); media_device_cleanup(&isp->media_dev); }

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 3401d42c7ea2d064d15c66698ff8eb96553179ce ]

Previous commit /adding/ support for 160 MHz chanspecs was incomplete. It didn't set bandwidth info and didn't extract control channel info. As the result it was also using uninitialized "sb" var.

This change has been tested for two chanspecs found to be reported by some devices/firmwares: 1) 60/160 (0xee32) Before: chnum:50 control_ch_num:36 After: chnum:50 control_ch_num:60 2) 120/160 (0xed72) Before: chnum:114 control_ch_num:100 After: chnum:114 control_ch_num:120

Fixes: 330994e8e8ec ("brcmfmac: fix for proper support of 160MHz bandwidth") Signed-off-by: Rafał Miłecki rafal@milecki.pl Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c index e7584b842dce..eb5db94f5745 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c @@ -193,6 +193,9 @@ static void brcmu_d11ac_decchspec(struct brcmu_chan *ch) } break; case BRCMU_CHSPEC_D11AC_BW_160: + ch->bw = BRCMU_CHAN_BW_160; + ch->sb = brcmu_maskget16(ch->chspec, BRCMU_CHSPEC_D11AC_SB_MASK, + BRCMU_CHSPEC_D11AC_SB_SHIFT); switch (ch->sb) { case BRCMU_CHAN_SB_LLL: ch->control_ch_num -= CH_70MHZ_APART;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 68c8d209cd4337da4fa04c672f0b62bb735969bc ]

Assigning 2 to "renesas,can-clock-select" tricks the driver into registering the CAN interface, even though we don't want that. This patch improves one of the checks to prevent that from happening.

Fixes: 862e2b6af9413b43 ("can: rcar_can: support all input clocks") Signed-off-by: Fabrizio Castro fabrizio.castro@bp.renesas.com Signed-off-by: Chris Paterson Chris.Paterson2@renesas.com Reviewed-by: Simon Horman horms+renesas@verge.net.au Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/can/rcar/rcar_can.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c index 11662f479e76..771a46083739 100644 --- a/drivers/net/can/rcar/rcar_can.c +++ b/drivers/net/can/rcar/rcar_can.c @@ -24,6 +24,9 @@

#define RCAR_CAN_DRV_NAME "rcar_can"

+#define RCAR_SUPPORTED_CLOCKS (BIT(CLKR_CLKP1) | BIT(CLKR_CLKP2) | \ + BIT(CLKR_CLKEXT)) + /* Mailbox configuration: * mailbox 60 - 63 - Rx FIFO mailboxes * mailbox 56 - 59 - Tx FIFO mailboxes @@ -789,7 +792,7 @@ static int rcar_can_probe(struct platform_device *pdev) goto fail_clk; }

- if (clock_select >= ARRAY_SIZE(clock_names)) { + if (!(BIT(clock_select) & RCAR_SUPPORTED_CLOCKS)) { err = -EINVAL; dev_err(&pdev->dev, "invalid CAN clock selected\n"); goto fail_clk;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 0fd791841a6d67af1155a9c3de54dea51220721e ]

The Motorola/Zebra Symbol DS4308-HD is a handheld USB barcode scanner which does not have a battery, but reports one anyway that always has capacity 2.

Let's apply the IGNORE quirk to prevent it from being treated like a power supply so that userspaces don't get confused that this accessory is almost out of power and warn the user that they need to charge their wired barcode scanner.

Reported here: https://bugs.chromium.org/p/chromium/issues/detail?id=804720

Signed-off-by: Benson Leung bleung@chromium.org Reviewed-by: Benjamin Tissoires benjamin.tissoires@redhat.com Signed-off-by: Benjamin Tissoires benjamin.tissoires@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-input.c | 3 +++ 2 files changed, 4 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 3fc8c0d67592..87904d2adadb 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -1001,6 +1001,7 @@ #define USB_VENDOR_ID_SYMBOL 0x05e0 #define USB_DEVICE_ID_SYMBOL_SCANNER_1 0x0800 #define USB_DEVICE_ID_SYMBOL_SCANNER_2 0x1300 +#define USB_DEVICE_ID_SYMBOL_SCANNER_3 0x1200

#define USB_VENDOR_ID_SYNAPTICS 0x06cb #define USB_DEVICE_ID_SYNAPTICS_TP 0x0001 diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index bb984cc9753b..d146a9b545ee 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -325,6 +325,9 @@ static const struct hid_device_id hid_battery_quirks[] = { { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084), HID_BATTERY_QUIRK_IGNORE }, + { HID_USB_DEVICE(USB_VENDOR_ID_SYMBOL, + USB_DEVICE_ID_SYMBOL_SCANNER_3), + HID_BATTERY_QUIRK_IGNORE }, {} };

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit d7d8bbb40a5b1f682ee6589e212934f4c6b8ad60 ]

The complete size ("total_size") of the fragmented packet is stored in the fragment header and in the size of the fragment chain. When the fragments are ready for merge, the skbuff's tail of the first fragment is expanded to have enough room after the data pointer for at least total_size. This means that it gets expanded by total_size - first_skb->len.

But this is ignoring the fact that after expanding the buffer, the fragment header is pulled by from this buffer. Assuming that the tailroom of the buffer was already 0, the buffer after the data pointer of the skbuff is now only total_size - len(fragment_header) large. When the merge function is then processing the remaining fragments, the code to copy the data over to the merged skbuff will cause an skb_over_panic when it tries to actually put enough data to fill the total_size bytes of the packet.

The size of the skb_pull must therefore also be taken into account when the buffer's tailroom is expanded.

Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") Reported-by: Martin Weinelt martin@darmstadt.freifunk.net Co-authored-by: Linus Lüssing linus.luessing@c0d3.blue Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de Signed-off-by: Sasha Levin sashal@kernel.org --- net/batman-adv/fragmentation.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/batman-adv/fragmentation.c b/net/batman-adv/fragmentation.c index b6abd19ab23e..c6d37d22bd12 100644 --- a/net/batman-adv/fragmentation.c +++ b/net/batman-adv/fragmentation.c @@ -274,7 +274,7 @@ batadv_frag_merge_packets(struct hlist_head *chain) kfree(entry);

packet = (struct batadv_frag_packet *)skb_out->data; - size = ntohs(packet->total_size); + size = ntohs(packet->total_size) + hdr_size;

/* Make room for the rest of the fragments. */ if (pskb_expand_head(skb_out, 0, size - skb_out->len, GFP_ATOMIC) < 0) {

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 77e461d14ed141253573eeeb4d34eccc51e38328 ]

Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW uses this channel for DMAE operations (e.g., TIME_SYNC implementation). Driver also uses the same channel 0 for DMAE operations for some of the PFs (e.g., PF0 on Port0). This could lead to concurrent access to the DMAE channel by FW and driver which is not legal. Hence need to assign unique DMAE id for FW. Currently following DMAE channels are used by the clients, MFW - OCBB/OCSD functionality uses DMAE channel 14/15 Driver 0-3 and 8-11 (for PF dmae operations) 4 and 12 (for stats requests) Assigning unique dmae_id '13' to the FW.

Changes from previous version: ------------------------------ v2: Incorporated the review comments.

Signed-off-by: Sudarsana Reddy Kalluru Sudarsana.Kalluru@cavium.com Signed-off-by: Michal Kalderon Michal.Kalderon@cavium.com Signed-off-by: David S. Miller davem@davemloft.net

Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 7 +++++++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 1 + 2 files changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 828e2e56b75e..1b7f4342dab9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -2187,6 +2187,13 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, #define PMF_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \ E1HVN_MAX)

+/* Following is the DMAE channel number allocation for the clients. + * MFW: OCBB/OCSD implementations use DMAE channels 14/15 respectively. + * Driver: 0-3 and 8-11 (for PF dmae operations) + * 4 and 12 (for stats requests) + */ +#define BNX2X_FW_DMAE_C 13 /* Channel for FW DMAE operations */ + /* PCIE link and speed */ #define PCICFG_LINK_WIDTH 0x1f00000 #define PCICFG_LINK_WIDTH_SHIFT 20 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 8baf9d3eb4b1..453bfd83a070 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -6149,6 +6149,7 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp, rdata->sd_vlan_tag = cpu_to_le16(start_params->sd_vlan_tag); rdata->path_id = BP_PATH(bp); rdata->network_cos_mode = start_params->network_cos_mode; + rdata->dmae_cmd_id = BNX2X_FW_DMAE_C;

rdata->vxlan_dst_port = cpu_to_le16(start_params->vxlan_dst_port); rdata->geneve_dst_port = cpu_to_le16(start_params->geneve_dst_port);

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ed4eac20dcffdad47709422e0cb925981b056668 ]

The value of "sb_index" is written by the hardware. Reading its value and writing it to "index" must finish before checking the loop condition.

Signed-off-by: Denis Bolotin denis.bolotin@cavium.com Signed-off-by: Michal Kalderon michal.kalderon@cavium.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qed/qed_int.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c index 719cdbfe1695..7746417130bd 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_int.c +++ b/drivers/net/ethernet/qlogic/qed/qed_int.c @@ -992,6 +992,8 @@ static int qed_int_attentions(struct qed_hwfn *p_hwfn) */ do { index = p_sb_attn->sb_index; + /* finish reading index before the loop condition */ + dma_rmb(); attn_bits = le32_to_cpu(p_sb_attn->atten_bits); attn_acks = le32_to_cpu(p_sb_attn->atten_ack); } while (index != p_sb_attn->sb_index);

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit bd85fbc2038a1bbe84990b23ff69b6fc81a32b2c ]

When re-registering a user mr, the mpt information for the existing mr when running SRIOV is obtained via the QUERY_MPT fw command. The returned information includes the mpt's lkey.

This retrieved mpt information is used to move the mpt back to hardware ownership in the rereg flow (via the SW2HW_MPT fw command when running SRIOV).

The fw API spec states that for SW2HW_MPT, the lkey field must be zero. Any ConnectX-3 PF driver which checks for strict spec adherence will return failure for SW2HW_MPT if the lkey field is not zero (although the fw in practice ignores this field for SW2HW_MPT).

Thus, in order to conform to the fw API spec, set the lkey field to zero before invoking SW2HW_MPT when running SRIOV.

Fixes: e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration") Signed-off-by: Jack Morgenstein jackm@dev.mellanox.co.il Signed-off-by: Tariq Toukan tariqt@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlx4/mr.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c index c7c0764991c9..20043f82c1d8 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mr.c +++ b/drivers/net/ethernet/mellanox/mlx4/mr.c @@ -363,6 +363,7 @@ int mlx4_mr_hw_write_mpt(struct mlx4_dev *dev, struct mlx4_mr *mmr, container_of((void *)mpt_entry, struct mlx4_cmd_mailbox, buf);

+ (*mpt_entry)->lkey = 0; err = mlx4_SW2HW_MPT(dev, mailbox, key); }

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit a463146e67c848cbab5ce706d6528281b7cded08 ]

UBSAN: Undefined behavior in drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29 signed integer overflow: 1802201963 + 1802201963 cannot be represented in type 'int'

The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors granting of reserved resources. The grant operation is calculated and protected, thus both members of the union cannot be negative. Changed type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed int to unsigned int, allowing large value.

Fixes: 5a0d0a6161ae ("mlx4: Structures and init/teardown for VF resource quotas") Signed-off-by: Aya Levin ayal@mellanox.com Signed-off-by: Tariq Toukan tariqt@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlx4/mlx4.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index c68da1986e51..aaeb446bba62 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -541,8 +541,8 @@ struct slave_list { struct resource_allocator { spinlock_t alloc_lock; /* protect quotas */ union { - int res_reserved; - int res_port_rsvd[MLX4_MAX_PORTS]; + unsigned int res_reserved; + unsigned int res_port_rsvd[MLX4_MAX_PORTS]; }; union { int res_free;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 33bf5519ae5dd356b182a94e3622f42860274a38 ]

PAGE_READ is used by RISC-V arch code included through mm headers, and it makes sense to bring in a prefix on these in the driver.

drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined #define PAGE_READ 0x2 In file included from include/linux/memremap.h:7, from include/linux/mm.h:27, from include/linux/scatterlist.h:8, from include/linux/dma-mapping.h:11, from drivers/mtd/nand/raw/qcom_nandc.c:17: arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition

Caught by riscv allmodconfig.

Signed-off-by: Olof Johansson olof@lixom.net Reviewed-by: Miquel Raynal miquel.raynal@bootlin.com Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mtd/nand/qcom_nandc.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c index b49ca02b399d..09d5f7df6023 100644 --- a/drivers/mtd/nand/qcom_nandc.c +++ b/drivers/mtd/nand/qcom_nandc.c @@ -149,15 +149,15 @@ #define NAND_VERSION_MINOR_SHIFT 16

/* NAND OP_CMDs */ -#define PAGE_READ 0x2 -#define PAGE_READ_WITH_ECC 0x3 -#define PAGE_READ_WITH_ECC_SPARE 0x4 -#define PROGRAM_PAGE 0x6 -#define PAGE_PROGRAM_WITH_ECC 0x7 -#define PROGRAM_PAGE_SPARE 0x9 -#define BLOCK_ERASE 0xa -#define FETCH_ID 0xb -#define RESET_DEVICE 0xd +#define OP_PAGE_READ 0x2 +#define OP_PAGE_READ_WITH_ECC 0x3 +#define OP_PAGE_READ_WITH_ECC_SPARE 0x4 +#define OP_PROGRAM_PAGE 0x6 +#define OP_PAGE_PROGRAM_WITH_ECC 0x7 +#define OP_PROGRAM_PAGE_SPARE 0x9 +#define OP_BLOCK_ERASE 0xa +#define OP_FETCH_ID 0xb +#define OP_RESET_DEVICE 0xd

/* Default Value for NAND_DEV_CMD_VLD */ #define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \ @@ -629,11 +629,11 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)

if (read) { if (host->use_ecc) - cmd = PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE; + cmd = OP_PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE; else - cmd = PAGE_READ | PAGE_ACC | LAST_PAGE; + cmd = OP_PAGE_READ | PAGE_ACC | LAST_PAGE; } else { - cmd = PROGRAM_PAGE | PAGE_ACC | LAST_PAGE; + cmd = OP_PROGRAM_PAGE | PAGE_ACC | LAST_PAGE; }

if (host->use_ecc) { @@ -1030,7 +1030,7 @@ static int nandc_param(struct qcom_nand_host *host) * in use. we configure the controller to perform a raw read of 512 * bytes to read onfi params */ - nandc_set_reg(nandc, NAND_FLASH_CMD, PAGE_READ | PAGE_ACC | LAST_PAGE); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_PAGE_READ | PAGE_ACC | LAST_PAGE); nandc_set_reg(nandc, NAND_ADDR0, 0); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_DEV0_CFG0, 0 << CW_PER_PAGE @@ -1084,7 +1084,7 @@ static int erase_block(struct qcom_nand_host *host, int page_addr) struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);

nandc_set_reg(nandc, NAND_FLASH_CMD, - BLOCK_ERASE | PAGE_ACC | LAST_PAGE); + OP_BLOCK_ERASE | PAGE_ACC | LAST_PAGE); nandc_set_reg(nandc, NAND_ADDR0, page_addr); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_DEV0_CFG0, @@ -1115,7 +1115,7 @@ static int read_id(struct qcom_nand_host *host, int column) if (column == -1) return 0;

- nandc_set_reg(nandc, NAND_FLASH_CMD, FETCH_ID); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_FETCH_ID); nandc_set_reg(nandc, NAND_ADDR0, column); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, @@ -1136,7 +1136,7 @@ static int reset(struct qcom_nand_host *host) struct nand_chip *chip = &host->chip; struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);

- nandc_set_reg(nandc, NAND_FLASH_CMD, RESET_DEVICE); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_RESET_DEVICE); nandc_set_reg(nandc, NAND_EXEC_CMD, 1);

write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit a6a66f80c85e8e20573ca03fabf32445954a88d5 ]

The current Cadence QSPI driver caused a kernel panic sporadically when writing to QSPI. The problem was caused by writing more bytes than needed because the QSPI operated on 4 bytes at a time. <snip> [ 11.202044] Unable to handle kernel paging request at virtual address bffd3000 [ 11.209254] pgd = e463054d [ 11.211948] [bffd3000] *pgd=2fffb811, *pte=00000000, *ppte=00000000 [ 11.218202] Internal error: Oops: 7 [#1] SMP ARM [ 11.222797] Modules linked in: [ 11.225844] CPU: 1 PID: 1317 Comm: systemd-hwdb Not tainted 4.17.7-d0c45cd44a8f [ 11.235796] Hardware name: Altera SOCFPGA Arria10 [ 11.240487] PC is at __raw_writesl+0x70/0xd4 [ 11.244741] LR is at cqspi_write+0x1a0/0x2cc </snip> On a page boundary limit the number of bytes copied from the tx buffer to remain within the page.

This patch uses a temporary buffer to hold the 4 bytes to write and then copies only the bytes required from the tx buffer.

Reported-by: Adrian Amborzewicz adrian.ambrozewicz@intel.com Signed-off-by: Thor Thayer thor.thayer@linux.intel.com Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mtd/spi-nor/cadence-quadspi.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index 8d89204b90d2..f22dd34f4f83 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -625,9 +625,23 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor, reg_base + CQSPI_REG_INDIRECTWR);

while (remaining > 0) { + size_t write_words, mod_bytes; + write_bytes = remaining > page_size ? page_size : remaining; - iowrite32_rep(cqspi->ahb_base, txbuf, - DIV_ROUND_UP(write_bytes, 4)); + write_words = write_bytes / 4; + mod_bytes = write_bytes % 4; + /* Write 4 bytes at a time then single bytes. */ + if (write_words) { + iowrite32_rep(cqspi->ahb_base, txbuf, write_words); + txbuf += (write_words * 4); + } + if (mod_bytes) { + unsigned int temp = 0xFFFFFFFF; + + memcpy(&temp, txbuf, mod_bytes); + iowrite32(temp, cqspi->ahb_base); + txbuf += mod_bytes; + }

ret = wait_for_completion_timeout(&cqspi->transfer_complete, msecs_to_jiffies @@ -638,7 +652,6 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor, goto failwr; }

- txbuf += write_bytes; remaining -= write_bytes;

if (remaining > 0)

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit eb62cca9bee842e5b23bd0ddfb1f271ca95e8759 ]

The getter callers doesn't know the valid Physical Queues (PQ) values. This patch makes sure that a valid PQ will always be returned.

The patch consists of 3 fixes:

- When qed_init_qm_get_idx_from_flags() receives a disabled flag, it returned PQ 0, which can potentially be another function's pq. Verify that flag is enabled, otherwise return default start_pq.

- When qed_init_qm_get_idx_from_flags() receives an unknown flag, it returned NULL and could lead to a segmentation fault. Return default start_pq instead.

- A modulo operation was added to MCOS/VFS PQ getters to make sure the PQ returned is in range of the required flag.

Fixes: b5a9ee7cf3be ("qed: Revise QM cofiguration") Signed-off-by: Denis Bolotin denis.bolotin@cavium.com Signed-off-by: Michal Kalderon michal.kalderon@cavium.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 24 +++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index a51cd1028ecb..16953c4ebd71 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -446,6 +446,11 @@ static u16 *qed_init_qm_get_idx_from_flags(struct qed_hwfn *p_hwfn, goto err; }

+ if (!(qed_get_pq_flags(p_hwfn) & pq_flags)) { + DP_ERR(p_hwfn, "pq flag 0x%x is not set\n", pq_flags); + goto err; + } + switch (pq_flags) { case PQ_FLAGS_RLS: return &qm_info->first_rl_pq; @@ -468,8 +473,7 @@ static u16 *qed_init_qm_get_idx_from_flags(struct qed_hwfn *p_hwfn, }

err: - DP_ERR(p_hwfn, "BAD pq flags %d\n", pq_flags); - return NULL; + return &qm_info->start_pq; }

/* save pq index in qm info */ @@ -493,20 +497,32 @@ u16 qed_get_cm_pq_idx_mcos(struct qed_hwfn *p_hwfn, u8 tc) { u8 max_tc = qed_init_qm_get_num_tcs(p_hwfn);

+ if (max_tc == 0) { + DP_ERR(p_hwfn, "pq with flag 0x%lx do not exist\n", + PQ_FLAGS_MCOS); + return p_hwfn->qm_info.start_pq; + } + if (tc > max_tc) DP_ERR(p_hwfn, "tc %d must be smaller than %d\n", tc, max_tc);

- return qed_get_cm_pq_idx(p_hwfn, PQ_FLAGS_MCOS) + tc; + return qed_get_cm_pq_idx(p_hwfn, PQ_FLAGS_MCOS) + (tc % max_tc); }

u16 qed_get_cm_pq_idx_vf(struct qed_hwfn *p_hwfn, u16 vf) { u16 max_vf = qed_init_qm_get_num_vfs(p_hwfn);

+ if (max_vf == 0) { + DP_ERR(p_hwfn, "pq with flag 0x%lx do not exist\n", + PQ_FLAGS_VFS); + return p_hwfn->qm_info.start_pq; + } + if (vf > max_vf) DP_ERR(p_hwfn, "vf %d must be smaller than %d\n", vf, max_vf);

- return qed_get_cm_pq_idx(p_hwfn, PQ_FLAGS_VFS) + vf; + return qed_get_cm_pq_idx(p_hwfn, PQ_FLAGS_VFS) + (vf % max_vf); }

u16 qed_get_cm_pq_idx_rl(struct qed_hwfn *p_hwfn, u8 rl)

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 829383e183728dec7ed9150b949cd6de64127809 ]

memunmap() should be used to free the return of memremap(), not iounmap().

Fixes: dfddb969edf0 ('iommu/vt-d: Switch from ioremap_cache to memremap') Signed-off-by: Pan Bian bianpan2016@163.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/intel-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index aaf3fed97477..e86c1c8ec7f6 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -3086,7 +3086,7 @@ static int copy_context_table(struct intel_iommu *iommu, }

if (old_ce) - iounmap(old_ce); + memunmap(old_ce);

ret = 0; if (devfn < 0x80)

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b7cdec3d699db2e5985ad39de0f25d3b6111928e ]

The wrong index is used when cleaning up RX buffer objects during release of RX queues. Update to use the correct index counter.

Signed-off-by: Thomas Falcon tlfalcon@linux.ibm.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/ibm/ibmvnic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 5c7134ccc1fd..14c53ed5cca6 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -457,8 +457,8 @@ static void release_rx_pools(struct ibmvnic_adapter *adapter)

for (j = 0; j < rx_pool->size; j++) { if (rx_pool->rx_buff[j].skb) { - dev_kfree_skb_any(rx_pool->rx_buff[i].skb); - rx_pool->rx_buff[i].skb = NULL; + dev_kfree_skb_any(rx_pool->rx_buff[j].skb); + rx_pool->rx_buff[j].skb = NULL; } }

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit c44c749d3b6fdfca39002e7e48e03fe9f9fe37a3 ]

of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place doesn't do that, so fix it.

Signed-off-by: Yangtao Li tiny.windzz@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/amd/sunlance.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amd/sunlance.c b/drivers/net/ethernet/amd/sunlance.c index 291ca5187f12..9845e07d40cd 100644 --- a/drivers/net/ethernet/amd/sunlance.c +++ b/drivers/net/ethernet/amd/sunlance.c @@ -1418,7 +1418,7 @@ static int sparc_lance_probe_one(struct platform_device *op,

prop = of_get_property(nd, "tpe-link-test?", NULL); if (!prop) - goto no_link_test; + goto node_put;

if (strcmp(prop, "true")) { printk(KERN_NOTICE "SunLance: warning: overriding option " @@ -1427,6 +1427,8 @@ static int sparc_lance_probe_one(struct platform_device *op, "to ecd@skynet.be\n"); auxio_set_lte(AUXIO_LTE_ON); } +node_put: + of_node_put(nd); no_link_test: lp->auto_select = 1; lp->tpe = 0;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Harry Pan harry.pan@intel.com

commit 2f2dde6ba89b1ef1fe23c1138131b315d9aa4019 upstream.

Some lower volume SanDisk Ultra Flair in 16GB, which the VID:PID is in 0781:5591, will aggressively request LPM of U1/U2 during runtime, when using this thumb drive as the OS installation key we found the device will generate failure during U1 exit path making it dropped from the USB bus, this causes a corrupted installation in system at the end.

i.e., [ 166.918296] hub 2-0:1.0: state 7 ports 7 chg 0000 evt 0004 [ 166.918327] usb usb2-port2: link state change [ 166.918337] usb usb2-port2: do warm reset [ 166.970039] usb usb2-port2: not warm reset yet, waiting 50ms [ 167.022040] usb usb2-port2: not warm reset yet, waiting 200ms [ 167.276043] usb usb2-port2: status 02c0, change 0041, 5.0 Gb/s [ 167.276050] usb 2-2: USB disconnect, device number 2 [ 167.276058] usb 2-2: unregistering device [ 167.276060] usb 2-2: unregistering interface 2-2:1.0 [ 167.276170] xhci_hcd 0000:00:15.0: shutdown urb ffffa3c7cc695cc0 ep1in-bulk [ 167.284055] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 167.284064] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 33 04 90 00 01 00 00 ...

Analyzed the USB trace in the link layer we realized it is because of the 6-ms timer of tRecoveryConfigurationTimeout which documented on the USB 3.2 Revision 1.0, the section 7.5.10.4.2 of "Exit from Recovery.Configuration"; device initiates U1 exit -> Recovery.Active -> Recovery.Configuration, then the host timer timeout makes the link transits to eSS.Inactive -> Rx.Detect follows by a Warm Reset.

Interestingly, the other higher volume of SanDisk Ultra Flair sharing the same VID:PID, such as 64GB, would not request LPM during runtime, it sticks at U0 always, thus disabling LPM does not affect those thumb drives at all.

The same odd occures in SanDisk Ultra Fit 16GB, VID:PID in 0781:5583.

Signed-off-by: Harry Pan harry.pan@intel.com Cc: stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -188,6 +188,10 @@ static const struct usb_device_id usb_qu /* Midiman M-Audio Keystation 88es */ { USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME },

+ /* SanDisk Ultra Fit and Ultra Flair */ + { USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM }, + { USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mathias Payer mathias.payer@nebelwelt.net

commit 704620afc70cf47abb9d6a1a57f3825d2bca49cf upstream.

When reading an extra descriptor, we need to properly check the minimum and maximum size allowed, to prevent from invalid data being sent by a device.

Reported-by: Hui Peng benquike@gmail.com Reported-by: Mathias Payer mathias.payer@nebelwelt.net Co-developed-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Hui Peng benquike@gmail.com Signed-off-by: Mathias Payer mathias.payer@nebelwelt.net Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Cc: stable stable@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/core/hub.c | 2 +- drivers/usb/core/usb.c | 6 +++--- drivers/usb/host/hwa-hc.c | 2 +- include/linux/usb.h | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2231,7 +2231,7 @@ static int usb_enumerate_device_otg(stru /* descriptor may appear anywhere in config */ err = __usb_get_extra_descriptor(udev->rawdescriptors[0], le16_to_cpu(udev->config[0].desc.wTotalLength), - USB_DT_OTG, (void **) &desc); + USB_DT_OTG, (void **) &desc, sizeof(*desc)); if (err || !(desc->bmAttributes & USB_OTG_HNP)) return 0;

--- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -833,14 +833,14 @@ EXPORT_SYMBOL_GPL(usb_get_current_frame_ */

int __usb_get_extra_descriptor(char *buffer, unsigned size, - unsigned char type, void **ptr) + unsigned char type, void **ptr, size_t minsize) { struct usb_descriptor_header *header;

while (size >= sizeof(struct usb_descriptor_header)) { header = (struct usb_descriptor_header *)buffer;

- if (header->bLength < 2) { + if (header->bLength < 2 || header->bLength > size) { printk(KERN_ERR "%s: bogus descriptor, type %d length %d\n", usbcore_name, @@ -849,7 +849,7 @@ int __usb_get_extra_descriptor(char *buf return -1; }

- if (header->bDescriptorType == type) { + if (header->bDescriptorType == type && header->bLength >= minsize) { *ptr = header; return 0; } --- a/drivers/usb/host/hwa-hc.c +++ b/drivers/usb/host/hwa-hc.c @@ -654,7 +654,7 @@ static int hwahc_security_create(struct top = itr + itr_size; result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index], le16_to_cpu(usb_dev->actconfig->desc.wTotalLength), - USB_DT_SECURITY, (void **) &secd); + USB_DT_SECURITY, (void **) &secd, sizeof(*secd)); if (result == -1) { dev_warn(dev, "BUG? WUSB host has no security descriptors\n"); return 0; --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -407,11 +407,11 @@ struct usb_host_bos { };

int __usb_get_extra_descriptor(char *buffer, unsigned size, - unsigned char type, void **ptr); + unsigned char type, void **ptr, size_t min); #define usb_get_extra_descriptor(ifpoint, type, ptr) \ __usb_get_extra_descriptor((ifpoint)->extra, \ (ifpoint)->extralen, \ - type, (void **)ptr) + type, (void **)ptr, sizeof(**(ptr)))

/* ----------------------------------------------------------------------- */

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kai-Heng Feng kai.heng.feng@canonical.com

commit 3deef52ce10514ccdebba8e8ab85f9cebd0eb3f7 upstream.

It's similar to other AMD audio devices, it also supports D3, which can save some power drain.

Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/pci/hda/hda_intel.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2513,6 +2513,10 @@ static const struct pci_device_id azx_id /* AMD Hudson */ { PCI_DEVICE(0x1022, 0x780d), .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB }, + /* AMD Stoney */ + { PCI_DEVICE(0x1022, 0x157a), + .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB | + AZX_DCAPS_PM_RUNTIME }, /* AMD Raven */ { PCI_DEVICE(0x1022, 0x15e3), .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB |

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai tiwai@suse.de

commit b51abed8355e5556886623b2772fa6b7598d2282 upstream.

Currently the PCM core calls snd_pcm_unlink() always unconditionally at closing a stream. However, since snd_pcm_unlink() invokes the global rwsem down, the lock can be easily contended. More badly, when a thread runs in a high priority RT-FIFO, it may stall at spinning.

Basically the call of snd_pcm_unlink() is required only for the linked streams that are already rare occasion. For normal use cases, this code path is fairly superfluous.

As an optimization (and also as a workaround for the RT problem above in normal situations without linked streams), this patch adds a check before calling snd_pcm_unlink() and calls it only when needed.

Reported-by: Chanho Min chanho.min@lge.com Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/core/pcm_native.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -2338,7 +2338,8 @@ int snd_pcm_hw_constraints_complete(stru

static void pcm_release_private(struct snd_pcm_substream *substream) { - snd_pcm_unlink(substream); + if (snd_pcm_stream_linked(substream)) + snd_pcm_unlink(substream); }

void snd_pcm_release_substream(struct snd_pcm_substream *substream)

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai tiwai@suse.de

commit 54947cd64c1b8290f64bb2958e343c07270e3a58 upstream.

We've got a regression report for some Thinkpad models (at least T570s) which shows the too low speaker output volume. The bisection leaded to the commit 61fcf8ece9b6 ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform"), and it's basically adding the two pin configurations for the dock, and looks harmless.

The real culprit seems, though, that the DAC assignment for the speaker pin is implicitly assumed on these devices, i.e. pin NID 0x14 to be coupled with DAC NID 0x03. When more pins are configured by the commit above, the auto-parser changes the DAC assignment, and this resulted in the regression.

As a workaround, just provide the fixed pin / DAC mapping table for this Thinkpad fixup function. It's no generic solution, but the problem itself is pretty much device-specific, so must be good enough.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1554304 Fixes: 61fcf8ece9b6 ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform") Cc: stable@vger.kernel.org Reported-and-tested-by: Jeremy Cline jcline@redhat.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/pci/hda/patch_realtek.c | 9 +++++++++ 1 file changed, 9 insertions(+)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4863,9 +4863,18 @@ static void alc_fixup_tpt470_dock(struct { 0x19, 0x21a11010 }, /* dock mic */ { } }; + /* Assure the speaker pin to be coupled with DAC NID 0x03; otherwise + * the speaker output becomes too low by some reason on Thinkpads with + * ALC298 codec + */ + static hda_nid_t preferred_pairs[] = { + 0x14, 0x03, 0x17, 0x02, 0x21, 0x02, + 0 + }; struct alc_spec *spec = codec->spec;

if (action == HDA_FIXUP_ACT_PRE_PROBE) { + spec->gen.preferred_dacs = preferred_pairs; spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP; snd_hda_apply_pincfgs(codec, pincfgs); } else if (action == HDA_FIXUP_ACT_INIT) {

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Halil Pasic pasic@linux.ibm.com

commit 78b1a52e05c9db11d293342e8d6d8a230a04b4e7 upstream.

While ccw_io_helper() seems like intended to be exclusive in a sense that it is supposed to facilitate I/O for at most one thread at any given time, there is actually nothing ensuring that threads won't pile up at vcdev->wait_q. If they do, all threads get woken up and see the status that belongs to some other request than their own. This can lead to bugs. For an example see: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788432

This race normally does not cause any problems. The operations provided by struct virtio_config_ops are usually invoked in a well defined sequence, normally don't fail, and are normally used quite infrequent too.

Yet, if some of the these operations are directly triggered via sysfs attributes, like in the case described by the referenced bug, userspace is given an opportunity to force races by increasing the frequency of the given operations.

Let us fix the problem by ensuring, that for each device, we finish processing the previous request before starting with a new one.

Signed-off-by: Halil Pasic pasic@linux.ibm.com Reported-by: Colin Ian King colin.king@canonical.com Cc: stable@vger.kernel.org Message-Id: 20180925121309.58524-3-pasic@linux.ibm.com Signed-off-by: Cornelia Huck cohuck@redhat.com Signed-off-by: Michael S. Tsirkin mst@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/s390/virtio/virtio_ccw.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/s390/virtio/virtio_ccw.c +++ b/drivers/s390/virtio/virtio_ccw.c @@ -59,6 +59,7 @@ struct virtio_ccw_device { unsigned int revision; /* Transport revision */ wait_queue_head_t wait_q; spinlock_t lock; + struct mutex io_lock; /* Serializes I/O requests */ struct list_head virtqueues; unsigned long indicators; unsigned long indicators2; @@ -299,6 +300,7 @@ static int ccw_io_helper(struct virtio_c unsigned long flags; int flag = intparm & VIRTIO_CCW_INTPARM_MASK;

+ mutex_lock(&vcdev->io_lock); do { spin_lock_irqsave(get_ccwdev_lock(vcdev->cdev), flags); ret = ccw_device_start(vcdev->cdev, ccw, intparm, 0, 0); @@ -311,7 +313,9 @@ static int ccw_io_helper(struct virtio_c cpu_relax(); } while (ret == -EBUSY); wait_event(vcdev->wait_q, doing_io(vcdev, flag) == 0); - return ret ? ret : vcdev->err; + ret = ret ? ret : vcdev->err; + mutex_unlock(&vcdev->io_lock); + return ret; }

static void virtio_ccw_drop_indicator(struct virtio_ccw_device *vcdev, @@ -1256,6 +1260,7 @@ static int virtio_ccw_online(struct ccw_ init_waitqueue_head(&vcdev->wait_q); INIT_LIST_HEAD(&vcdev->virtqueues); spin_lock_init(&vcdev->lock); + mutex_init(&vcdev->io_lock);

spin_lock_irqsave(get_ccwdev_lock(cdev), flags); dev_set_drvdata(&cdev->dev, vcdev);

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chuck Lever chuck.lever@oracle.com

commit 8dae5398ab1ac107b1517e8195ed043d5f422bd0 upstream.

call_encode can be invoked more than once per RPC call. Ensure that each call to gss_wrap_req_priv does not overwrite pointers to previously allocated memory.

Signed-off-by: Chuck Lever chuck.lever@oracle.com Cc: stable@kernel.org Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/sunrpc/auth_gss/auth_gss.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -1736,6 +1736,7 @@ priv_release_snd_buf(struct rpc_rqst *rq for (i=0; i < rqstp->rq_enc_pages_num; i++) __free_page(rqstp->rq_enc_pages[i]); kfree(rqstp->rq_enc_pages); + rqstp->rq_release_snd_buf = NULL; }

static int @@ -1744,6 +1745,9 @@ alloc_enc_pages(struct rpc_rqst *rqstp) struct xdr_buf *snd_buf = &rqstp->rq_snd_buf; int first, last, i;

+ if (rqstp->rq_release_snd_buf) + rqstp->rq_release_snd_buf(rqstp); + if (snd_buf->page_len == 0) { rqstp->rq_enc_pages_num = 0; return 0;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bin Liu b-liu@ti.com

commit 59861547ec9a9736e7882f6fb0c096a720ff811a upstream.

The driver defines three states for a cppi channel. - idle: .chan_busy == 0 && not in .pending list - pending: .chan_busy == 0 && in .pending list - busy: .chan_busy == 1 && not in .pending list

There are cases in which the cppi channel could be in the pending state when cppi41_dma_issue_pending() is called after cppi41_runtime_suspend() is called.

cppi41_stop_chan() has a bug for these cases to set channels to idle state. It only checks the .chan_busy flag, but not the .pending list, then later when cppi41_runtime_resume() is called the channels in .pending list will be transitioned to busy state.

Removing channels from the .pending list solves the problem.

Fixes: 975faaeb9985 ("dma: cppi41: start tear down only if channel is busy") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Bin Liu b-liu@ti.com Reviewed-by: Peter Ujfalusi peter.ujfalusi@ti.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/dma/cppi41.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)

--- a/drivers/dma/cppi41.c +++ b/drivers/dma/cppi41.c @@ -723,8 +723,22 @@ static int cppi41_stop_chan(struct dma_c

desc_phys = lower_32_bits(c->desc_phys); desc_num = (desc_phys - cdd->descs_phys) / sizeof(struct cppi41_desc); - if (!cdd->chan_busy[desc_num]) + if (!cdd->chan_busy[desc_num]) { + struct cppi41_channel *cc, *_ct; + + /* + * channels might still be in the pendling list if + * cppi41_dma_issue_pending() is called after + * cppi41_runtime_suspend() is called + */ + list_for_each_entry_safe(cc, _ct, &cdd->pending, node) { + if (cc != c) + continue; + list_del(&cc->node); + break; + } return 0; + }

ret = cppi41_tear_down_chan(c); if (ret)

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sandeep Singh sandeep.singh@amd.com

commit a7d57abcc8a5bdeb53bbf8e87558e8e0a2c2a29d upstream.

Occasionally AMD SNPS 3.0 xHC does not respond to CSS when set, also it does not flag anything on SRE and HCE to point the internal xHC errors on USBSTS register. This stalls the entire system wide suspend and there is no point in stalling just because of xHC CSS is not responding.

To work around this problem, if the xHC does not flag anything on SRE and HCE, we can skip the CSS timeout and allow the system to continue the suspend. Once the system resume happens we can internally reset the controller using XHCI_RESET_ON_RESUME quirk

Signed-off-by: Shyam Sundar S K Shyam-sundar.S-k@amd.com Signed-off-by: Sandeep Singh Sandeep.Singh@amd.com cc: Nehal Shah Nehal-bakulchandra.Shah@amd.com Cc: stable@vger.kernel.org Tested-by: Kai-Heng Feng kai.heng.feng@canonical.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/host/xhci-pci.c | 4 ++++ drivers/usb/host/xhci.c | 26 ++++++++++++++++++++++---- drivers/usb/host/xhci.h | 3 +++ 3 files changed, 29 insertions(+), 4 deletions(-)

--- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -144,6 +144,10 @@ static void xhci_pci_quirks(struct devic pdev->device == 0x43bb)) xhci->quirks |= XHCI_SUSPEND_DELAY;

+ if (pdev->vendor == PCI_VENDOR_ID_AMD && + (pdev->device == 0x15e0 || pdev->device == 0x15e1)) + xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND; + if (pdev->vendor == PCI_VENDOR_ID_AMD) xhci->quirks |= XHCI_TRUST_TX_LENGTH;

--- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -918,6 +918,7 @@ int xhci_suspend(struct xhci_hcd *xhci, unsigned int delay = XHCI_MAX_HALT_USEC; struct usb_hcd *hcd = xhci_to_hcd(xhci); u32 command; + u32 res;

if (!hcd->state) return 0; @@ -969,11 +970,28 @@ int xhci_suspend(struct xhci_hcd *xhci, command = readl(&xhci->op_regs->command); command |= CMD_CSS; writel(command, &xhci->op_regs->command); + xhci->broken_suspend = 0; if (xhci_handshake(&xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) { - xhci_warn(xhci, "WARN: xHC save state timeout\n"); - spin_unlock_irq(&xhci->lock); - return -ETIMEDOUT; + /* + * AMD SNPS xHC 3.0 occasionally does not clear the + * SSS bit of USBSTS and when driver tries to poll + * to see if the xHC clears BIT(8) which never happens + * and driver assumes that controller is not responding + * and times out. To workaround this, its good to check + * if SRE and HCE bits are not set (as per xhci + * Section 5.4.2) and bypass the timeout. + */ + res = readl(&xhci->op_regs->status); + if ((xhci->quirks & XHCI_SNPS_BROKEN_SUSPEND) && + (((res & STS_SRE) == 0) && + ((res & STS_HCE) == 0))) { + xhci->broken_suspend = 1; + } else { + xhci_warn(xhci, "WARN: xHC save state timeout\n"); + spin_unlock_irq(&xhci->lock); + return -ETIMEDOUT; + } } spin_unlock_irq(&xhci->lock);

@@ -1026,7 +1044,7 @@ int xhci_resume(struct xhci_hcd *xhci, b set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);

spin_lock_irq(&xhci->lock); - if (xhci->quirks & XHCI_RESET_ON_RESUME) + if ((xhci->quirks & XHCI_RESET_ON_RESUME) || xhci->broken_suspend) hibernated = true;

if (!hibernated) { --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1839,6 +1839,7 @@ struct xhci_hcd { #define XHCI_SUSPEND_DELAY BIT_ULL(30) #define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31) #define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34) +#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)

unsigned int num_active_eps; unsigned int limit_active_eps; @@ -1870,6 +1871,8 @@ struct xhci_hcd {

/* platform-specific data -- must come last */ unsigned long priv[0] __aligned(sizeof(s64)); + /* Broken Suspend flag for SNPS Suspend resume issue */ + u8 broken_suspend; };

/* Platform specific overrides to generic XHCI hc_driver ops */

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

commit 91291e9998d208370eb8156c760691b873bd7522 upstream.

This patch adds f2fs_is_valid_blkaddr() in below functions to do sanity check with block address to avoid pentential panic: - f2fs_grab_read_bio() - __written_first_block()

https://bugzilla.kernel.org/show_bug.cgi?id=200465

- Reproduce

- POC (poc.c) #define _GNU_SOURCE #include <sys/types.h> #include <sys/mount.h> #include <sys/mman.h> #include <sys/stat.h> #include <sys/xattr.h>

#include <dirent.h> #include <errno.h> #include <error.h> #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h>

#include <linux/falloc.h> #include <linux/loop.h>

static void activity(char *mpoint) {

char *xattr; int err;

err = asprintf(&xattr, "%s/foo/bar/xattr", mpoint);

char buf2[113]; memset(buf2, 0, sizeof(buf2)); listxattr(xattr, buf2, sizeof(buf2));

}

int main(int argc, char *argv[]) { activity(argv[1]); return 0; }

- kernel message [ 844.718738] F2FS-fs (loop0): Mounted with checkpoint version = 2 [ 846.430929] F2FS-fs (loop0): access invalid blkaddr:1024 [ 846.431058] WARNING: CPU: 1 PID: 1249 at fs/f2fs/checkpoint.c:154 f2fs_is_valid_blkaddr+0x10f/0x160 [ 846.431059] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper [ 846.431310] CPU: 1 PID: 1249 Comm: a.out Not tainted 4.18.0-rc3+ #1 [ 846.431312] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 846.431315] RIP: 0010:f2fs_is_valid_blkaddr+0x10f/0x160 [ 846.431316] Code: 00 eb ed 31 c0 83 fa 05 75 ae 48 83 ec 08 48 8b 3f 89 f1 48 c7 c2 fc 0b 0f 8b 48 c7 c6 8b d7 09 8b 88 44 24 07 e8 61 8b ff ff <0f> 0b 0f b6 44 24 07 48 83 c4 08 eb 81 4c 8b 47 10 8b 8f 38 04 00 [ 846.431347] RSP: 0018:ffff961c414a7bc0 EFLAGS: 00010282 [ 846.431349] RAX: 0000000000000000 RBX: ffffc5f787b8ea80 RCX: 0000000000000000 [ 846.431350] RDX: 0000000000000000 RSI: ffff89dfffd165d8 RDI: ffff89dfffd165d8 [ 846.431351] RBP: ffff961c414a7c20 R08: 0000000000000001 R09: 0000000000000248 [ 846.431353] R10: 0000000000000000 R11: 0000000000000248 R12: 0000000000000007 [ 846.431369] R13: ffff89dff5492800 R14: ffff89dfae3aa000 R15: ffff89dff4ff88d0 [ 846.431372] FS: 00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000 [ 846.431373] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.431374] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0 [ 846.431384] Call Trace: [ 846.431426] f2fs_iget+0x6f4/0xe70 [ 846.431430] ? f2fs_find_entry+0x71/0x90 [ 846.431432] f2fs_lookup+0x1aa/0x390 [ 846.431452] __lookup_slow+0x97/0x150 [ 846.431459] lookup_slow+0x35/0x50 [ 846.431462] walk_component+0x1c6/0x470 [ 846.431479] ? memcg_kmem_charge_memcg+0x70/0x90 [ 846.431488] ? page_add_file_rmap+0x13/0x200 [ 846.431491] path_lookupat+0x76/0x230 [ 846.431501] ? __alloc_pages_nodemask+0xfc/0x280 [ 846.431504] filename_lookup+0xb8/0x1a0 [ 846.431534] ? _cond_resched+0x16/0x40 [ 846.431541] ? kmem_cache_alloc+0x160/0x1d0 [ 846.431549] ? path_listxattr+0x41/0xa0 [ 846.431551] path_listxattr+0x41/0xa0 [ 846.431570] do_syscall_64+0x55/0x100 [ 846.431583] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 846.431607] RIP: 0033:0x7f882de1c0d7 [ 846.431607] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48 [ 846.431639] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2 [ 846.431641] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7 [ 846.431642] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0 [ 846.431643] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000 [ 846.431645] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550 [ 846.431646] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000 [ 846.431648] ---[ end trace abca54df39d14f5c ]--- [ 846.431651] F2FS-fs (loop0): invalid blkaddr: 1024, type: 5, run fsck to fix. [ 846.431762] WARNING: CPU: 1 PID: 1249 at fs/f2fs/f2fs.h:2697 f2fs_iget+0xd17/0xe70 [ 846.431763] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper [ 846.431797] CPU: 1 PID: 1249 Comm: a.out Tainted: G W 4.18.0-rc3+ #1 [ 846.431798] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 846.431800] RIP: 0010:f2fs_iget+0xd17/0xe70 [ 846.431801] Code: ff ff 48 63 d8 e9 e1 f6 ff ff 48 8b 45 c8 41 b8 05 00 00 00 48 c7 c2 d8 e8 0e 8b 48 c7 c6 1d b0 0a 8b 48 8b 38 e8 f9 b4 00 00 <0f> 0b 48 8b 45 c8 f0 80 48 48 04 e9 d8 f9 ff ff 0f 0b 48 8b 43 18 [ 846.431832] RSP: 0018:ffff961c414a7bd0 EFLAGS: 00010282 [ 846.431834] RAX: 0000000000000000 RBX: ffffc5f787b8ea80 RCX: 0000000000000006 [ 846.431835] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff89dfffd165d0 [ 846.431836] RBP: ffff961c414a7c20 R08: 0000000000000000 R09: 0000000000000273 [ 846.431837] R10: 0000000000000000 R11: ffff89dfad50ca60 R12: 0000000000000007 [ 846.431838] R13: ffff89dff5492800 R14: ffff89dfae3aa000 R15: ffff89dff4ff88d0 [ 846.431840] FS: 00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000 [ 846.431841] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.431842] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0 [ 846.431846] Call Trace: [ 846.431850] ? f2fs_find_entry+0x71/0x90 [ 846.431853] f2fs_lookup+0x1aa/0x390 [ 846.431856] __lookup_slow+0x97/0x150 [ 846.431858] lookup_slow+0x35/0x50 [ 846.431874] walk_component+0x1c6/0x470 [ 846.431878] ? memcg_kmem_charge_memcg+0x70/0x90 [ 846.431880] ? page_add_file_rmap+0x13/0x200 [ 846.431882] path_lookupat+0x76/0x230 [ 846.431884] ? __alloc_pages_nodemask+0xfc/0x280 [ 846.431886] filename_lookup+0xb8/0x1a0 [ 846.431890] ? _cond_resched+0x16/0x40 [ 846.431891] ? kmem_cache_alloc+0x160/0x1d0 [ 846.431894] ? path_listxattr+0x41/0xa0 [ 846.431896] path_listxattr+0x41/0xa0 [ 846.431898] do_syscall_64+0x55/0x100 [ 846.431901] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 846.431902] RIP: 0033:0x7f882de1c0d7 [ 846.431903] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48 [ 846.431934] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2 [ 846.431936] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7 [ 846.431937] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0 [ 846.431939] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000 [ 846.431940] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550 [ 846.431941] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000 [ 846.431943] ---[ end trace abca54df39d14f5d ]--- [ 846.432033] F2FS-fs (loop0): access invalid blkaddr:1024 [ 846.432051] WARNING: CPU: 1 PID: 1249 at fs/f2fs/checkpoint.c:154 f2fs_is_valid_blkaddr+0x10f/0x160 [ 846.432051] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper [ 846.432085] CPU: 1 PID: 1249 Comm: a.out Tainted: G W 4.18.0-rc3+ #1 [ 846.432086] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 846.432089] RIP: 0010:f2fs_is_valid_blkaddr+0x10f/0x160 [ 846.432089] Code: 00 eb ed 31 c0 83 fa 05 75 ae 48 83 ec 08 48 8b 3f 89 f1 48 c7 c2 fc 0b 0f 8b 48 c7 c6 8b d7 09 8b 88 44 24 07 e8 61 8b ff ff <0f> 0b 0f b6 44 24 07 48 83 c4 08 eb 81 4c 8b 47 10 8b 8f 38 04 00 [ 846.432120] RSP: 0018:ffff961c414a7900 EFLAGS: 00010286 [ 846.432122] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000006 [ 846.432123] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff89dfffd165d0 [ 846.432124] RBP: ffff89dff5492800 R08: 0000000000000001 R09: 000000000000029d [ 846.432125] R10: ffff961c414a7820 R11: 000000000000029d R12: 0000000000000400 [ 846.432126] R13: 0000000000000000 R14: ffff89dff4ff88d0 R15: 0000000000000000 [ 846.432128] FS: 00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000 [ 846.432130] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.432131] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0 [ 846.432135] Call Trace: [ 846.432151] f2fs_wait_on_block_writeback+0x20/0x110 [ 846.432158] f2fs_grab_read_bio+0xbc/0xe0 [ 846.432161] f2fs_submit_page_read+0x21/0x280 [ 846.432163] f2fs_get_read_data_page+0xb7/0x3c0 [ 846.432165] f2fs_get_lock_data_page+0x29/0x1e0 [ 846.432167] f2fs_get_new_data_page+0x148/0x550 [ 846.432170] f2fs_add_regular_entry+0x1d2/0x550 [ 846.432178] ? __switch_to+0x12f/0x460 [ 846.432181] f2fs_add_dentry+0x6a/0xd0 [ 846.432184] f2fs_do_add_link+0xe9/0x140 [ 846.432186] __recover_dot_dentries+0x260/0x280 [ 846.432189] f2fs_lookup+0x343/0x390 [ 846.432193] __lookup_slow+0x97/0x150 [ 846.432195] lookup_slow+0x35/0x50 [ 846.432208] walk_component+0x1c6/0x470 [ 846.432212] ? memcg_kmem_charge_memcg+0x70/0x90 [ 846.432215] ? page_add_file_rmap+0x13/0x200 [ 846.432217] path_lookupat+0x76/0x230 [ 846.432219] ? __alloc_pages_nodemask+0xfc/0x280 [ 846.432221] filename_lookup+0xb8/0x1a0 [ 846.432224] ? _cond_resched+0x16/0x40 [ 846.432226] ? kmem_cache_alloc+0x160/0x1d0 [ 846.432228] ? path_listxattr+0x41/0xa0 [ 846.432230] path_listxattr+0x41/0xa0 [ 846.432233] do_syscall_64+0x55/0x100 [ 846.432235] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 846.432237] RIP: 0033:0x7f882de1c0d7 [ 846.432237] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48 [ 846.432269] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2 [ 846.432271] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7 [ 846.432272] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0 [ 846.432273] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000 [ 846.432274] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550 [ 846.432275] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000 [ 846.432277] ---[ end trace abca54df39d14f5e ]--- [ 846.432279] F2FS-fs (loop0): invalid blkaddr: 1024, type: 5, run fsck to fix. [ 846.432376] WARNING: CPU: 1 PID: 1249 at fs/f2fs/f2fs.h:2697 f2fs_wait_on_block_writeback+0xb1/0x110 [ 846.432376] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper [ 846.432410] CPU: 1 PID: 1249 Comm: a.out Tainted: G W 4.18.0-rc3+ #1 [ 846.432411] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 846.432413] RIP: 0010:f2fs_wait_on_block_writeback+0xb1/0x110 [ 846.432414] Code: 66 90 f0 ff 4b 34 74 59 5b 5d c3 48 8b 7d 00 41 b8 05 00 00 00 89 d9 48 c7 c2 d8 e8 0e 8b 48 c7 c6 1d b0 0a 8b e8 df bc fd ff <0f> 0b f0 80 4d 48 04 e9 67 ff ff ff 48 8b 03 48 c1 e8 37 83 e0 07 [ 846.432445] RSP: 0018:ffff961c414a7910 EFLAGS: 00010286 [ 846.432447] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000006 [ 846.432448] RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffff89dfffd165d0 [ 846.432449] RBP: ffff89dff5492800 R08: 0000000000000000 R09: 00000000000002d1 [ 846.432450] R10: ffff961c414a7820 R11: ffff89dfad50cf80 R12: 0000000000000400 [ 846.432451] R13: 0000000000000000 R14: ffff89dff4ff88d0 R15: 0000000000000000 [ 846.432453] FS: 00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000 [ 846.432454] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.432455] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0 [ 846.432459] Call Trace: [ 846.432463] f2fs_grab_read_bio+0xbc/0xe0 [ 846.432464] f2fs_submit_page_read+0x21/0x280 [ 846.432466] f2fs_get_read_data_page+0xb7/0x3c0 [ 846.432468] f2fs_get_lock_data_page+0x29/0x1e0 [ 846.432470] f2fs_get_new_data_page+0x148/0x550 [ 846.432473] f2fs_add_regular_entry+0x1d2/0x550 [ 846.432475] ? __switch_to+0x12f/0x460 [ 846.432477] f2fs_add_dentry+0x6a/0xd0 [ 846.432480] f2fs_do_add_link+0xe9/0x140 [ 846.432483] __recover_dot_dentries+0x260/0x280 [ 846.432485] f2fs_lookup+0x343/0x390 [ 846.432488] __lookup_slow+0x97/0x150 [ 846.432490] lookup_slow+0x35/0x50 [ 846.432505] walk_component+0x1c6/0x470 [ 846.432509] ? memcg_kmem_charge_memcg+0x70/0x90 [ 846.432511] ? page_add_file_rmap+0x13/0x200 [ 846.432513] path_lookupat+0x76/0x230 [ 846.432515] ? __alloc_pages_nodemask+0xfc/0x280 [ 846.432517] filename_lookup+0xb8/0x1a0 [ 846.432520] ? _cond_resched+0x16/0x40 [ 846.432522] ? kmem_cache_alloc+0x160/0x1d0 [ 846.432525] ? path_listxattr+0x41/0xa0 [ 846.432526] path_listxattr+0x41/0xa0 [ 846.432529] do_syscall_64+0x55/0x100 [ 846.432531] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 846.432533] RIP: 0033:0x7f882de1c0d7 [ 846.432533] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48 [ 846.432565] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2 [ 846.432567] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7 [ 846.432568] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0 [ 846.432569] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000 [ 846.432570] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550 [ 846.432571] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000 [ 846.432573] ---[ end trace abca54df39d14f5f ]--- [ 846.434280] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 846.434424] PGD 80000001ebd3a067 P4D 80000001ebd3a067 PUD 1eb1ae067 PMD 0 [ 846.434551] Oops: 0000 [#1] SMP PTI [ 846.434697] CPU: 0 PID: 44 Comm: kworker/u5:0 Tainted: G W 4.18.0-rc3+ #1 [ 846.434805] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 846.435000] Workqueue: fscrypt_read_queue decrypt_work [ 846.435174] RIP: 0010:fscrypt_do_page_crypto+0x6e/0x2d0 [ 846.435351] Code: 00 65 48 8b 04 25 28 00 00 00 48 89 84 24 88 00 00 00 31 c0 e8 43 c2 e0 ff 49 8b 86 48 02 00 00 85 ed c7 44 24 70 00 00 00 00 <48> 8b 58 08 0f 84 14 02 00 00 48 8b 78 10 48 8b 0c 24 48 c7 84 24 [ 846.435696] RSP: 0018:ffff961c40f9bd60 EFLAGS: 00010206 [ 846.435870] RAX: 0000000000000000 RBX: ffffc5f787719b80 RCX: ffffc5f787719b80 [ 846.436051] RDX: ffffffff8b9f4b88 RSI: ffffffff8b0ae622 RDI: ffff961c40f9bdb8 [ 846.436261] RBP: 0000000000001000 R08: ffffc5f787719b80 R09: 0000000000001000 [ 846.436433] R10: 0000000000000018 R11: fefefefefefefeff R12: ffffc5f787719b80 [ 846.436562] R13: ffffc5f787719b80 R14: ffff89dff4ff88d0 R15: 0ffff89dfaddee60 [ 846.436658] FS: 0000000000000000(0000) GS:ffff89dfffc00000(0000) knlGS:0000000000000000 [ 846.436758] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.436898] CR2: 0000000000000008 CR3: 00000001eddd0000 CR4: 00000000000006f0 [ 846.437001] Call Trace: [ 846.437181] ? check_preempt_wakeup+0xf2/0x230 [ 846.437276] ? check_preempt_curr+0x7c/0x90 [ 846.437370] fscrypt_decrypt_page+0x48/0x4d [ 846.437466] __fscrypt_decrypt_bio+0x5b/0x90 [ 846.437542] decrypt_work+0x12/0x20 [ 846.437651] process_one_work+0x15e/0x3d0 [ 846.437740] worker_thread+0x4c/0x440 [ 846.437848] kthread+0xf8/0x130 [ 846.437938] ? rescuer_thread+0x350/0x350 [ 846.438022] ? kthread_associate_blkcg+0x90/0x90 [ 846.438117] ret_from_fork+0x35/0x40 [ 846.438201] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper [ 846.438653] CR2: 0000000000000008 [ 846.438713] ---[ end trace abca54df39d14f60 ]--- [ 846.438796] RIP: 0010:fscrypt_do_page_crypto+0x6e/0x2d0 [ 846.438844] Code: 00 65 48 8b 04 25 28 00 00 00 48 89 84 24 88 00 00 00 31 c0 e8 43 c2 e0 ff 49 8b 86 48 02 00 00 85 ed c7 44 24 70 00 00 00 00 <48> 8b 58 08 0f 84 14 02 00 00 48 8b 78 10 48 8b 0c 24 48 c7 84 24 [ 846.439084] RSP: 0018:ffff961c40f9bd60 EFLAGS: 00010206 [ 846.439176] RAX: 0000000000000000 RBX: ffffc5f787719b80 RCX: ffffc5f787719b80 [ 846.440927] RDX: ffffffff8b9f4b88 RSI: ffffffff8b0ae622 RDI: ffff961c40f9bdb8 [ 846.442083] RBP: 0000000000001000 R08: ffffc5f787719b80 R09: 0000000000001000 [ 846.443284] R10: 0000000000000018 R11: fefefefefefefeff R12: ffffc5f787719b80 [ 846.444448] R13: ffffc5f787719b80 R14: ffff89dff4ff88d0 R15: 0ffff89dfaddee60 [ 846.445558] FS: 0000000000000000(0000) GS:ffff89dfffc00000(0000) knlGS:0000000000000000 [ 846.446687] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.447796] CR2: 0000000000000008 CR3: 00000001eddd0000 CR4: 00000000000006f0

- Location https://elixir.bootlin.com/linux/v4.18-rc4/source/fs/crypto/crypto.c#L149 struct crypto_skcipher *tfm = ci->ci_ctfm; Here ci can be NULL

Note that this issue maybe require CONFIG_F2FS_FS_ENCRYPTION=y to reproduce.

Reported-by Wen Xu wen.xu@gatech.edu Signed-off-by: Chao Yu yuchao0@huawei.com Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org [bwh: Backported to 4.14: adjust context] Signed-off-by: Ben Hutchings ben.hutchings@codethink.co.uk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/f2fs/data.c | 3 +++ fs/f2fs/inode.c | 18 +++++++++++++----- 2 files changed, 16 insertions(+), 5 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index 8f6e7c3a10f8..c68b319b07aa 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -468,6 +468,9 @@ static struct bio *f2fs_grab_read_bio(struct inode *inode, block_t blkaddr, struct fscrypt_ctx *ctx = NULL; struct bio *bio;

+ if (!f2fs_is_valid_blkaddr(sbi, blkaddr, DATA_GENERIC)) + return ERR_PTR(-EFAULT); + if (f2fs_encrypted_file(inode)) { ctx = fscrypt_get_ctx(inode, GFP_NOFS); if (IS_ERR(ctx)) diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c index 9a40724dbaa6..50818b519df8 100644 --- a/fs/f2fs/inode.c +++ b/fs/f2fs/inode.c @@ -62,14 +62,16 @@ static void __get_inode_rdev(struct inode *inode, struct f2fs_inode *ri) } }

-static bool __written_first_block(struct f2fs_sb_info *sbi, +static int __written_first_block(struct f2fs_sb_info *sbi, struct f2fs_inode *ri) { block_t addr = le32_to_cpu(ri->i_addr[offset_in_addr(ri)]);

- if (is_valid_data_blkaddr(sbi, addr)) - return true; - return false; + if (!__is_valid_data_blkaddr(addr)) + return 1; + if (!f2fs_is_valid_blkaddr(sbi, addr, DATA_GENERIC)) + return -EFAULT; + return 0; }

static void __set_inode_rdev(struct inode *inode, struct f2fs_inode *ri) @@ -253,6 +255,7 @@ static int do_read_inode(struct inode *inode) struct page *node_page; struct f2fs_inode *ri; projid_t i_projid; + int err;

/* Check if ino is within scope */ if (check_nid_range(sbi, inode->i_ino)) @@ -307,7 +310,12 @@ static int do_read_inode(struct inode *inode) /* get rdev by using inline_info */ __get_inode_rdev(inode, ri);

- if (__written_first_block(sbi, ri)) + err = __written_first_block(sbi, ri); + if (err < 0) { + f2fs_put_page(node_page, 1); + return err; + } + if (!err) set_inode_flag(inode, FI_FIRST_BLOCK_WRITTEN);

if (!need_inode_block_update(sbi, inode->i_ino))

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[for older kernels only, lustre has been removed from upstream]

When someone writes: strncpy(dest, source, sizeof(source)); they really are just doing the same thing as: strcpy(dest, source); but somehow they feel better because they are now using the "safe" version of the string functions. Cargo-cult programming at its finest...

gcc-8 rightfully warns you about doing foolish things like this. Now that the stable kernels are all starting to be built using gcc-8, let's get rid of this warning so that we do not have to gaze at this horror.

To dropt the warning, just convert the code to using strcpy() so that if someone really wants to audit this code and find all of the obvious problems, it will be easier to do so.

Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/staging/lustre/lnet/lnet/config.c | 3 +-- drivers/staging/lustre/lustre/lmv/lmv_obd.c | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/staging/lustre/lnet/lnet/config.c +++ b/drivers/staging/lustre/lnet/lnet/config.c @@ -354,8 +354,7 @@ lnet_parse_networks(struct list_head *ni CERROR("Can't allocate net interface name\n"); goto failed; } - strncpy(ni->ni_interfaces[niface], iface, - strlen(iface)); + strcpy(ni->ni_interfaces[niface], iface); niface++; iface = comma; } while (iface); --- a/drivers/staging/lustre/lustre/lmv/lmv_obd.c +++ b/drivers/staging/lustre/lustre/lmv/lmv_obd.c @@ -645,7 +645,7 @@ repeat_fid2path: memmove(ptr + strlen(gf->gf_path) + 1, ptr, strlen(ori_gf->gf_path));

- strncpy(ptr, gf->gf_path, strlen(gf->gf_path)); + strcpy(ptr, gf->gf_path); ptr += strlen(gf->gf_path); *ptr = '/'; }

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paulo Alcantara palcantara@suse.com

commit c988de29ca161823db6a7125e803d597ef75b49c upstream.

Make sure to use the CIFS_DIR_SEP(cifs_sb) as path separator for prefixpath too. Fixes a bug with smb1 UNIX extensions.

Fixes: a6b5058fafdf ("fs/cifs: make share unaccessible at root level mountable") Signed-off-by: Paulo Alcantara palcantara@suse.com Reviewed-by: Aurelien Aptel aaptel@suse.com Signed-off-by: Steve French stfrench@microsoft.com CC: Stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/cifs/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -174,7 +174,7 @@ cifs_bp_rename_retry:

cifs_dbg(FYI, "using cifs_sb prepath <%s>\n", cifs_sb->prepath); memcpy(full_path+dfsplen+1, cifs_sb->prepath, pplen-1); - full_path[dfsplen] = '\'; + full_path[dfsplen] = dirsep; for (i = 0; i < pplen-1; i++) if (full_path[dfsplen+1+i] == '/') full_path[dfsplen+1+i] = CIFS_DIR_SEP(cifs_sb);

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Young Xiao YangX92@hotmail.com

commit 87e4a5405f087427fbf8b437d2796283dce2b38f upstream.

pstapriv->max_num_sta is always <= NUM_STA, since max_num_sta is either set in _rtw_init_sta_priv() or rtw_set_beacon().

Fixes: ef9209b642f1 ("staging: rtl8723bs: Fix indenting errors and an off-by-one mistake in core/rtw_mlme_ext.c") Signed-off-by: Young Xiao YangX92@hotmail.com Reviewed-by: Dan Carpenter dan.carpenter@oracle.com Cc: stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/staging/rtl8723bs/core/rtw_mlme_ext.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c +++ b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c @@ -1574,7 +1574,7 @@ unsigned int OnAssocReq(struct adapter * if (pstat->aid > 0) { DBG_871X(" old AID %d\n", pstat->aid); } else { - for (pstat->aid = 1; pstat->aid < NUM_STA; pstat->aid++) + for (pstat->aid = 1; pstat->aid <= NUM_STA; pstat->aid++) if (pstapriv->sta_aid[pstat->aid - 1] == NULL) break;

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alex Deucher alexander.deucher@amd.com

commit a81a7c9c9ea3042ab02d66ac35def74abf091c15 upstream.

Some variants require different MC firmware images.

Acked-by: Christian König christian.koenig@amd.com Reviewed-by: Junwei Zhang Jerry.Zhang@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c @@ -52,6 +52,8 @@ MODULE_FIRMWARE("amdgpu/tonga_mc.bin"); MODULE_FIRMWARE("amdgpu/polaris11_mc.bin"); MODULE_FIRMWARE("amdgpu/polaris10_mc.bin"); MODULE_FIRMWARE("amdgpu/polaris12_mc.bin"); +MODULE_FIRMWARE("amdgpu/polaris11_k_mc.bin"); +MODULE_FIRMWARE("amdgpu/polaris10_k_mc.bin"); MODULE_FIRMWARE("amdgpu/polaris12_k_mc.bin");

static const u32 golden_settings_tonga_a11[] = @@ -220,22 +222,39 @@ static int gmc_v8_0_init_microcode(struc chip_name = "tonga"; break; case CHIP_POLARIS11: - chip_name = "polaris11"; + if (((adev->pdev->device == 0x67ef) && + ((adev->pdev->revision == 0xe0) || + (adev->pdev->revision == 0xe5))) || + ((adev->pdev->device == 0x67ff) && + ((adev->pdev->revision == 0xcf) || + (adev->pdev->revision == 0xef) || + (adev->pdev->revision == 0xff)))) + chip_name = "polaris11_k"; + else if ((adev->pdev->device == 0x67ef) && + (adev->pdev->revision == 0xe2)) + chip_name = "polaris11_k"; + else + chip_name = "polaris11"; break; case CHIP_POLARIS10: - chip_name = "polaris10"; + if ((adev->pdev->device == 0x67df) && + ((adev->pdev->revision == 0xe1) || + (adev->pdev->revision == 0xf7))) + chip_name = "polaris10_k"; + else + chip_name = "polaris10"; break; case CHIP_POLARIS12: - chip_name = "polaris12"; if (((adev->pdev->device == 0x6987) && ((adev->pdev->revision == 0xc0) || (adev->pdev->revision == 0xc3))) || ((adev->pdev->device == 0x6981) && ((adev->pdev->revision == 0x00) || (adev->pdev->revision == 0x01) || - (adev->pdev->revision == 0x10)))) { + (adev->pdev->revision == 0x10)))) chip_name = "polaris12_k"; - } + else + chip_name = "polaris12"; break; case CHIP_FIJI: case CHIP_CARRIZO:

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Shih pihsun@chromium.org

commit 100bc3e2bebf95506da57cbdf5f26b25f6da4c81 upstream.

serial8250_register_8250_port calls uart_config_port, which calls config_port on the port before it tries to power on the port. So we need the port to be on before calling serial8250_register_8250_port. Change the code to always do a runtime resume in probe before registering port, and always do a runtime suspend in remove.

This basically reverts the change in commit 68e5fc4a255a ("tty: serial: 8250_mtk: use pm_runtime callbacks for enabling"), but still use pm_runtime callbacks.

Fixes: 68e5fc4a255a ("tty: serial: 8250_mtk: use pm_runtime callbacks for enabling") Signed-off-by: Peter Shih pihsun@chromium.org Cc: stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/tty/serial/8250/8250_mtk.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-)

--- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -222,17 +222,17 @@ static int mtk8250_probe(struct platform

platform_set_drvdata(pdev, data);

- pm_runtime_enable(&pdev->dev); - if (!pm_runtime_enabled(&pdev->dev)) { - err = mtk8250_runtime_resume(&pdev->dev); - if (err) - return err; - } + err = mtk8250_runtime_resume(&pdev->dev); + if (err) + return err;

data->line = serial8250_register_8250_port(&uart); if (data->line < 0) return data->line;

+ pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + return 0; }

@@ -243,13 +243,11 @@ static int mtk8250_remove(struct platfor pm_runtime_get_sync(&pdev->dev);

serial8250_unregister_port(data->line); + mtk8250_runtime_suspend(&pdev->dev);

pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev);

- if (!pm_runtime_status_suspended(&pdev->dev)) - mtk8250_runtime_suspend(&pdev->dev); - return 0; }

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Macpaul Lin macpaul@gmail.com

commit dada6a43b0402eba438a17ac86fdc64ac56a4607 upstream.

This patch is trying to fix KE issue due to "BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198" reported by Syzkaller scan."

[26364:syz-executor0][name:report8t]BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198 [26364:syz-executor0][name:report&]Read of size 1 at addr ffffff900e44f95f by task syz-executor0/26364 [26364:syz-executor0][name:report&] [26364:syz-executor0]CPU: 7 PID: 26364 Comm: syz-executor0 Tainted: G W 0 [26364:syz-executor0]Call trace: [26364:syz-executor0][<ffffff9008095cf8>] dump_bacIctrace+Ox0/0x470 [26364:syz-executor0][<ffffff9008096de0>] show_stack+0x20/0x30 [26364:syz-executor0][<ffffff90089cc9c8>] dump_stack+Oxd8/0x128 [26364:syz-executor0][<ffffff90084edb38>] print_address_description +0x80/0x4a8 [26364:syz-executor0][<ffffff90084ee270>] kasan_report+Ox178/0x390 [26364:syz-executor0][<ffffff90084ee4a0>] _asan_report_loadi_noabort+Ox18/0x20 [26364:syz-executor0][<ffffff9008b092ac>] param_set_kgdboc_var+Ox194/0x198 [26364:syz-executor0][<ffffff900813af64>] param_attr_store+Ox14c/0x270 [26364:syz-executor0][<ffffff90081394c8>] module_attr_store+0x60/0x90 [26364:syz-executor0][<ffffff90086690c0>] sysfs_kl_write+Ox100/0x158 [26364:syz-executor0][<ffffff9008666d84>] kernfs_fop_write+0x27c/0x3a8 [26364:syz-executor0][<ffffff9008508264>] do_loop_readv_writev+0x114/0x1b0 [26364:syz-executor0][<ffffff9008509ac8>] do_readv_writev+0x4f8/0x5e0 [26364:syz-executor0][<ffffff9008509ce4>] vfs_writev+0x7c/Oxb8 [26364:syz-executor0][<ffffff900850ba64>] SyS_writev+Oxcc/0x208 [26364:syz-executor0][<ffffff90080883f0>] elO_svc_naked +0x24/0x28 [26364:syz-executor0][name:report&] [26364:syz-executor0][name:report&]The buggy address belongs to the variable: [26364:syz-executor0][name:report&] kgdb_tty_line+Ox3f/0x40 [26364:syz-executor0][name:report&] [26364:syz-executor0][name:report&]Memory state around the buggy address: [26364:syz-executor0] ffffff900e44f800: 00 00 00 00 00 04 fa fa fa fa fa fa 00 fa fa fa [26364:syz-executor0] ffffff900e44f880: fa fa fa fa 00 fa fa fa fa fa fa fa 00 fa fa fa [26364:syz-executor0]> ffffff900e44f900: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 [26364:syz-executor0][name:report&] ^ [26364:syz-executor0] ffffff900e44f980: 00 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa [26364:syz-executor0] ffffff900e44fa00: 04 fa fa fa fa fa fa fa 00 fa fa fa fa fa fa fa [26364:syz-executor0][name:report&] [26364:syz-executor0][name:panic&]Disabling lock debugging due to kernel taint [26364:syz-executor0]------------[cut here]------------

After checking the source code, we've found there might be an out-of-bounds access to "config[len - 1]" array when the variable "len" is zero.

Signed-off-by: Macpaul Lin macpaul@gmail.com Acked-by: Daniel Thompson daniel.thompson@linaro.org Cc: stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/tty/serial/kgdboc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/kgdboc.c +++ b/drivers/tty/serial/kgdboc.c @@ -232,7 +232,7 @@ static void kgdboc_put_char(u8 chr)

static int param_set_kgdboc_var(const char *kmessage, struct kernel_param *kp) { - int len = strlen(kmessage); + size_t len = strlen(kmessage);

if (len >= MAX_CONFIG_LEN) { printk(KERN_ERR "kgdboc: config string too long\n"); @@ -254,7 +254,7 @@ static int param_set_kgdboc_var(const ch

strcpy(config, kmessage); /* Chop out \n char as a result of echo */ - if (config[len - 1] == '\n') + if (len && config[len - 1] == '\n') config[len - 1] = '\0';

if (configured == 1)

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vasyl Vavrychuk vasyl.vavrychuk@globallogic.com

commit a1881c9b8a1edef0a5ae1d5c1b61406fe3402114 upstream.

Otherwise if network manager starts configuring Wi-Fi interface immidiatelly after getting notification of its creation, we will get NULL pointer dereference:

BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff95ae94c8>] hrtimer_active+0x28/0x50 ... Call Trace: [<ffffffff95ae9997>] ? hrtimer_try_to_cancel+0x27/0x110 [<ffffffff95ae9a95>] ? hrtimer_cancel+0x15/0x20 [<ffffffffc0803bf0>] ? mac80211_hwsim_config+0x140/0x1c0 [mac80211_hwsim]

Cc: stable@vger.kernel.org Signed-off-by: Vasyl Vavrychuk vasyl.vavrychuk@globallogic.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/wireless/mac80211_hwsim.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -2698,6 +2698,10 @@ static int mac80211_hwsim_new_radio(stru

wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);

+ tasklet_hrtimer_init(&data->beacon_timer, + mac80211_hwsim_beacon, + CLOCK_MONOTONIC, HRTIMER_MODE_ABS); + err = ieee80211_register_hw(hw); if (err < 0) { printk(KERN_DEBUG "mac80211_hwsim: ieee80211_register_hw failed (%d)\n", @@ -2722,10 +2726,6 @@ static int mac80211_hwsim_new_radio(stru data->debugfs, data, &hwsim_simulate_radar);

- tasklet_hrtimer_init(&data->beacon_timer, - mac80211_hwsim_beacon, - CLOCK_MONOTONIC, HRTIMER_MODE_ABS); - spin_lock_bh(&hwsim_radio_lock); list_add_tail(&data->list, &hwsim_radios); spin_unlock_bh(&hwsim_radio_lock);

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Felix Fietkau nbd@nbd.name

commit a317e65face482371de30246b6494feb093ff7f9 upstream.

Make it behave like regular ieee80211_tx_status calls, except for the lack of filtered frame processing. This fixes spurious low-ack triggered disconnections with powersave clients connected to an AP.

Fixes: f027c2aca0cf4 ("mac80211: add ieee80211_tx_status_noskb") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/mac80211/status.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -953,6 +953,8 @@ void ieee80211_tx_status_ext(struct ieee /* Track when last TDLS packet was ACKed */ if (test_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH)) sta->status_stats.last_tdls_pkt_time = jiffies; + } else if (test_sta_flag(sta, WLAN_STA_PS_STA)) { + return; } else { ieee80211_lost_packet(sta, info); }

4.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach emmanuel.grumbach@intel.com

commit 990d71846a0b7281bd933c34d734e6afc7408e7e upstream.

NullFunc packets should never be duplicate just like QoS-NullFunc packets.

We saw a client that enters / exits power save with NullFunc frames (and not with QoS-NullFunc) despite the fact that the association supports HT. This specific client also re-uses a non-zero sequence number for different NullFunc frames. At some point, the client had to send a retransmission of the NullFunc frame and we dropped it, leading to a misalignment in the power save state. Fix this by never consider a NullFunc frame as duplicate, just like we do for QoS NullFunc frames.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201449

CC: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/mac80211/rx.c | 1 + 1 file changed, 1 insertion(+)

--- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1254,6 +1254,7 @@ ieee80211_rx_h_check_dup(struct ieee8021 return RX_CONTINUE;

if (ieee80211_is_ctl(hdr->frame_control) || + ieee80211_is_nullfunc(hdr->frame_control) || ieee80211_is_qos_nullfunc(hdr->frame_control) || is_multicast_ether_addr(hdr->addr1)) return RX_CONTINUE;