PVSCSI implementation in VMware hypervisor under specific configuration ("SCSI Bus Sharing" set to "Physical") returns zero dataLen in completion descriptor for read_capacity_16. As a result, the kernel can not detect proper disk geometry. It can be recognized by the kernel message: [ 0.776588] sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.

PVSCSI implementation in QEMU does not set dataLen at all keeping it zeroed, leading to the boot hang, as was reported by Shmulik Ladkani.

It is likely that the controller returns the garbage at the end of the buffer. Residual length should be set by the driver in that case. scsi_lib layer will erase corresponding data. See commit bdb2b8cab439 ("[SCSI] erase invalid data returned by device") for details.

Commit e662502b3a78 ("scsi: vmw_pvscsi: Set correct residual data length") introduced the issue by setting residual length unconditionally causing scsi_lib layer to erase the useful payload beyond dataLen in the mentioned above cases.

Considering existing issues in implementations of PVSCSI controllers, we do not want to call scsi_set_resid() when dataLen == 0. Calling scsi_set_resid() has no effect if dataLen equals buffer length.

Fixes: e662502b3a78 ("scsi: vmw_pvscsi: Set correct residual data length") Reported-and-suggested-by: Shmulik Ladkani shmulik.ladkani@gmail.com Link: https://lore.kernel.org/lkml/20210824120028.30d9c071@blondie/ Cc: Matt Wang wwentao@vmware.com Cc: Martin K. Petersen martin.petersen@oracle.com Cc: Vishal Bhakta vbhakta@vmware.com Cc: VMware PV-Drivers pv-drivers@vmware.com Cc: James E.J. Bottomley jejb@linux.ibm.com Cc: linux-scsi@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Alexey Makhalov amakhalov@vmware.com --- drivers/scsi/vmw_pvscsi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c index ce1ba1b93..9419d6d1d 100644 --- a/drivers/scsi/vmw_pvscsi.c +++ b/drivers/scsi/vmw_pvscsi.c @@ -586,9 +586,12 @@ static void pvscsi_complete_request(struct pvscsi_adapter *adapter, * Commands like INQUIRY may transfer less data than * requested by the initiator via bufflen. Set residual * count to make upper layer aware of the actual amount - * of data returned. + * of data returned. There are cases when controller + * returns zero dataLen with non zero data - do not set + * residual count in that case. */ - scsi_set_resid(cmd, scsi_bufflen(cmd) - e->dataLen); + if (e->dataLen && (e->dataLen < scsi_bufflen(cmd))) + scsi_set_resid(cmd, scsi_bufflen(cmd) - e->dataLen); cmd->result = (DID_OK << 16); break;