From: Tony Lindgren tony@atomide.com

[ Upstream commit a7b5d7c4969aba8d1f04c29048906abaa71fb6a9 ]

We currently get thefollowing on driver unbind if a reset is configured and asserted:

WARNING: CPU: 0 PID: 993 at drivers/reset/core.c:432 reset_control_assert ... (reset_control_assert) from [<c0fecda8>] (sysc_remove+0x190/0x1e4) (sysc_remove) from [<c0a2bb58>] (platform_remove+0x24/0x3c) (platform_remove) from [<c0a292fc>] (__device_release_driver+0x154/0x214) (__device_release_driver) from [<c0a2a210>] (device_driver_detach+0x3c/0x8c) (device_driver_detach) from [<c0a27d64>] (unbind_store+0x60/0xd4) (unbind_store) from [<c0546bec>] (kernfs_fop_write_iter+0x10c/0x1cc)

Let's fix it by checking the reset status.

Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bus/ti-sysc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 45f5530666d3..16e389dce111 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -3044,7 +3044,9 @@ static int sysc_remove(struct platform_device *pdev)

pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); - reset_control_assert(ddata->rsts); + + if (!reset_control_status(ddata->rsts)) + reset_control_assert(ddata->rsts);

unprepare: sysc_unprepare(ddata);

From: Yonghong Song yhs@fb.com

[ Upstream commit de920fc64cbaa031f947e9be964bda05fd090380 ]

x86 bpf_jit_comp.c used kmalloc_array to store jited addresses for each bpf insn. With a large bpf program, we have see the following allocation failures in our production server:

page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0" Call Trace: dump_stack+0x50/0x70 warn_alloc.cold.120+0x72/0xd2 ? __alloc_pages_direct_compact+0x157/0x160 __alloc_pages_slowpath+0xcdb/0xd00 ? get_page_from_freelist+0xe44/0x1600 ? vunmap_page_range+0x1ba/0x340 __alloc_pages_nodemask+0x2c9/0x320 kmalloc_order+0x18/0x80 kmalloc_order_trace+0x1d/0xa0 bpf_int_jit_compile+0x1e2/0x484 ? kmalloc_order_trace+0x1d/0xa0 bpf_prog_select_runtime+0xc3/0x150 bpf_prog_load+0x480/0x720 ? __mod_memcg_lruvec_state+0x21/0x100 __do_sys_bpf+0xc31/0x2040 ? close_pdeo+0x86/0xe0 do_syscall_64+0x42/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f2f300f7fa9 Code: Bad RIP value.

Dumped assembly:

ffffffff810b6d70 <bpf_int_jit_compile>: ; { ffffffff810b6d70: e8 eb a5 b4 00 callq 0xffffffff81c01360 <__fentry__> ffffffff810b6d75: 41 57 pushq %r15 ... ffffffff810b6f39: e9 72 fe ff ff jmp 0xffffffff810b6db0 <bpf_int_jit_compile+0x40> ; addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL); ffffffff810b6f3e: 8b 45 0c movl 12(%rbp), %eax ; return __kmalloc(bytes, flags); ffffffff810b6f41: be c0 0c 00 00 movl $3264, %esi ; addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL); ffffffff810b6f46: 8d 78 01 leal 1(%rax), %edi ; if (unlikely(check_mul_overflow(n, size, &bytes))) ffffffff810b6f49: 48 c1 e7 02 shlq $2, %rdi ; return __kmalloc(bytes, flags); ffffffff810b6f4d: e8 8e 0c 1d 00 callq 0xffffffff81287be0 <__kmalloc> ; if (!addrs) { ffffffff810b6f52: 48 85 c0 testq %rax, %rax

Change kmalloc_array() to kvmalloc_array() to avoid potential allocation error for big bpf programs.

Signed-off-by: Yonghong Song yhs@fb.com Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/bpf/20210309015647.3657852-1-yhs@fb.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/net/bpf_jit_comp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 796506dcfc42..49a506583e0c 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -2019,7 +2019,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) extra_pass = true; goto skip_init_addrs; } - addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL); + addrs = kvmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL); if (!addrs) { prog = orig_prog; goto out_addrs; @@ -2109,7 +2109,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) if (image) bpf_prog_fill_jited_linfo(prog, addrs + 1); out_addrs: - kfree(addrs); + kvfree(addrs); kfree(jit_data); prog->aux->jit_data = NULL; }

From: Pavel Andrianov andrianov@ispras.ru

[ Upstream commit 0571a753cb07982cc82f4a5115e0b321da89e1f3 ]

pxa168_eth_remove() firstly calls unregister_netdev(), then cancels a timeout work. unregister_netdev() shuts down a device interface and removes it from the kernel tables. If the timeout occurs in parallel, the timeout work (pxa168_eth_tx_timeout_task) performs stop and open of the device. It may lead to an inconsistent state and memory leaks.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Pavel Andrianov andrianov@ispras.ru Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/marvell/pxa168_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index d1e4d42e497d..3712e1786091 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -1544,8 +1544,8 @@ static int pxa168_eth_remove(struct platform_device *pdev) clk_disable_unprepare(pep->clk); mdiobus_unregister(pep->smi_bus); mdiobus_free(pep->smi_bus); - unregister_netdev(dev); cancel_work_sync(&pep->tx_timeout_task); + unregister_netdev(dev); free_netdev(dev); return 0; }

From: Tong Zhang ztong0001@gmail.com

[ Upstream commit a9f81244d2e33e6dfcef120fefd30c96b3f7cdb0 ]

setup_fritz() in avmfritz.c might fail with -EIO and in this case the isac.type and isac.write_reg is not initialized and remains 0(NULL). A subsequent call to isac_release() will dereference isac->write_reg and crash.

[ 1.737444] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1.737809] #PF: supervisor instruction fetch in kernel mode [ 1.738106] #PF: error_code(0x0010) - not-present page [ 1.738378] PGD 0 P4D 0 [ 1.738515] Oops: 0010 [#1] SMP NOPTI [ 1.738711] CPU: 0 PID: 180 Comm: systemd-udevd Not tainted 5.12.0-rc2+ #78 [ 1.739077] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-p rebuilt.qemu.org 04/01/2014 [ 1.739664] RIP: 0010:0x0 [ 1.739807] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 1.740200] RSP: 0018:ffffc9000027ba10 EFLAGS: 00010202 [ 1.740478] RAX: 0000000000000000 RBX: ffff888102f41840 RCX: 0000000000000027 [ 1.740853] RDX: 00000000000000ff RSI: 0000000000000020 RDI: ffff888102f41800 [ 1.741226] RBP: ffffc9000027ba20 R08: ffff88817bc18440 R09: ffffc9000027b808 [ 1.741600] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888102f41840 [ 1.741976] R13: 00000000fffffffb R14: ffff888102f41800 R15: ffff8881008b0000 [ 1.742351] FS: 00007fda3a38a8c0(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 1.742774] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.743076] CR2: ffffffffffffffd6 CR3: 00000001021ec000 CR4: 00000000000006f0 [ 1.743452] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1.743828] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1.744206] Call Trace: [ 1.744339] isac_release+0xcc/0xe0 [mISDNipac] [ 1.744582] fritzpci_probe.cold+0x282/0x739 [avmfritz] [ 1.744861] local_pci_probe+0x48/0x80 [ 1.745063] pci_device_probe+0x10f/0x1c0 [ 1.745278] really_probe+0xfb/0x420 [ 1.745471] driver_probe_device+0xe9/0x160 [ 1.745693] device_driver_attach+0x5d/0x70 [ 1.745917] __driver_attach+0x8f/0x150 [ 1.746123] ? device_driver_attach+0x70/0x70 [ 1.746354] bus_for_each_dev+0x7e/0xc0 [ 1.746560] driver_attach+0x1e/0x20 [ 1.746751] bus_add_driver+0x152/0x1f0 [ 1.746957] driver_register+0x74/0xd0 [ 1.747157] ? 0xffffffffc00d8000 [ 1.747334] __pci_register_driver+0x54/0x60 [ 1.747562] AVM_init+0x36/0x1000 [avmfritz] [ 1.747791] do_one_initcall+0x48/0x1d0 [ 1.747997] ? __cond_resched+0x19/0x30 [ 1.748206] ? kmem_cache_alloc_trace+0x390/0x440 [ 1.748458] ? do_init_module+0x28/0x250 [ 1.748669] do_init_module+0x62/0x250 [ 1.748870] load_module+0x23ee/0x26a0 [ 1.749073] __do_sys_finit_module+0xc2/0x120 [ 1.749307] ? __do_sys_finit_module+0xc2/0x120 [ 1.749549] __x64_sys_finit_module+0x1a/0x20 [ 1.749782] do_syscall_64+0x38/0x90

Signed-off-by: Tong Zhang ztong0001@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/isdn/hardware/mISDN/mISDNipac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c index ec475087fbf9..39f841b42488 100644 --- a/drivers/isdn/hardware/mISDN/mISDNipac.c +++ b/drivers/isdn/hardware/mISDN/mISDNipac.c @@ -694,7 +694,7 @@ isac_release(struct isac_hw *isac) { if (isac->type & IPAC_TYPE_ISACX) WriteISAC(isac, ISACX_MASK, 0xff); - else + else if (isac->type != 0) WriteISAC(isac, ISAC_MASK, 0xff); if (isac->dch.timer.function != NULL) { del_timer(&isac->dch.timer);

From: Markus Theil markus.theil@tu-ilmenau.de

[ Upstream commit 3bd801b14e0c5d29eeddc7336558beb3344efaa3 ]

Clear beacon ie pointer and ie length after free in order to prevent double free.

================================================================== BUG: KASAN: double-free or invalid-free \ in ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876

CPU: 0 PID: 8472 Comm: syz-executor100 Not tainted 5.11.0-rc6-syzkaller #0 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 print_address_description.constprop.0.cold+0x5b/0x2c6 mm/kasan/report.c:230 kasan_report_invalid_free+0x51/0x80 mm/kasan/report.c:355 ____kasan_slab_free+0xcc/0xe0 mm/kasan/common.c:341 kasan_slab_free include/linux/kasan.h:192 [inline] __cache_free mm/slab.c:3424 [inline] kfree+0xed/0x270 mm/slab.c:3760 ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876 rdev_leave_ibss net/wireless/rdev-ops.h:545 [inline] __cfg80211_leave_ibss+0x19a/0x4c0 net/wireless/ibss.c:212 __cfg80211_leave+0x327/0x430 net/wireless/core.c:1172 cfg80211_leave net/wireless/core.c:1221 [inline] cfg80211_netdev_notifier_call+0x9e8/0x12c0 net/wireless/core.c:1335 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2040 call_netdevice_notifiers_extack net/core/dev.c:2052 [inline] call_netdevice_notifiers net/core/dev.c:2066 [inline] __dev_close_many+0xee/0x2e0 net/core/dev.c:1586 __dev_close net/core/dev.c:1624 [inline] __dev_change_flags+0x2cb/0x730 net/core/dev.c:8476 dev_change_flags+0x8a/0x160 net/core/dev.c:8549 dev_ifsioc+0x210/0xa70 net/core/dev_ioctl.c:265 dev_ioctl+0x1b1/0xc40 net/core/dev_ioctl.c:511 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060 sock_ioctl+0x477/0x6a0 net/socket.c:1177 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+93976391bf299d425f44@syzkaller.appspotmail.com Signed-off-by: Markus Theil markus.theil@tu-ilmenau.de Link: https://lore.kernel.org/r/20210213133653.367130-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/ibss.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 1f552f374e97..a7ac53a2f00d 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -1874,6 +1874,8 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata)

/* remove beacon */ kfree(sdata->u.ibss.ie); + sdata->u.ibss.ie = NULL; + sdata->u.ibss.ie_len = 0;

/* on the next join, re-program HT parameters */ memset(&ifibss->ht_capa, 0, sizeof(ifibss->ht_capa));

From: Karthikeyan Kathirvel kathirve@codeaurora.org

[ Upstream commit 041c881a0ba8a75f71118bd9766b78f04beed469 ]

Even if the first channel from sband channel list is invalid or disabled mac80211 ends up choosing it as the default channel for monitor interfaces, making them not usable.

Fix this by assigning the first available valid or enabled channel instead.

Signed-off-by: Karthikeyan Kathirvel kathirve@codeaurora.org Link: https://lore.kernel.org/r/1615440547-7661-1-git-send-email-kathirve@codeauro... [reword commit message, comment, code cleanups] Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/main.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 523380aed92e..19c093bb3876 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -982,8 +982,19 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) continue;

if (!dflt_chandef.chan) { + /* + * Assign the first enabled channel to dflt_chandef + * from the list of channels + */ + for (i = 0; i < sband->n_channels; i++) + if (!(sband->channels[i].flags & + IEEE80211_CHAN_DISABLED)) + break; + /* if none found then use the first anyway */ + if (i == sband->n_channels) + i = 0; cfg80211_chandef_create(&dflt_chandef, - &sband->channels[0], + &sband->channels[i], NL80211_CHAN_NO_HT); /* init channel we're on */ if (!local->use_chanctx && !local->_oper_chandef.chan) {

From: Konrad Dybcio konrad.dybcio@somainline.org

[ Upstream commit 4a9d36b0610aa7034340e976652e5b43320dd7c5 ]

While passing the A530-specific lm_setup func to A530 and A540 to !A530 was fine back when only these two were supported, it certainly is not a good idea to send A540 specifics to smaller GPUs like A508 and friends.

Signed-off-by: Konrad Dybcio konrad.dybcio@somainline.org Signed-off-by: Rob Clark robdclark@chromium.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/adreno/a5xx_power.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/adreno/a5xx_power.c b/drivers/gpu/drm/msm/adreno/a5xx_power.c index f176a6f3eff6..e58670a61df4 100644 --- a/drivers/gpu/drm/msm/adreno/a5xx_power.c +++ b/drivers/gpu/drm/msm/adreno/a5xx_power.c @@ -304,7 +304,7 @@ int a5xx_power_init(struct msm_gpu *gpu) /* Set up the limits management */ if (adreno_is_a530(adreno_gpu)) a530_lm_setup(gpu); - else + else if (adreno_is_a540(adreno_gpu)) a540_lm_setup(gpu);

/* Set up SP/TP power collpase */

From: Ludovic Senecaux linuxludo@free.fr

[ Upstream commit 8b2030b4305951f44afef80225f1475618e25a73 ]

This fix permits gre connections to be tracked within ip6tables rules

Signed-off-by: Ludovic Senecaux linuxludo@free.fr Acked-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_conntrack_proto_gre.c | 3 --- 1 file changed, 3 deletions(-)

diff --git a/net/netfilter/nf_conntrack_proto_gre.c b/net/netfilter/nf_conntrack_proto_gre.c index 5b05487a60d2..db11e403d818 100644 --- a/net/netfilter/nf_conntrack_proto_gre.c +++ b/net/netfilter/nf_conntrack_proto_gre.c @@ -218,9 +218,6 @@ int nf_conntrack_gre_packet(struct nf_conn *ct, enum ip_conntrack_info ctinfo, const struct nf_hook_state *state) { - if (state->pf != NFPROTO_IPV4) - return -NF_ACCEPT; - if (!nf_ct_is_confirmed(ct)) { unsigned int *timeouts = nf_ct_timeout_lookup(ct);

From: Alex Elder elder@linaro.org

[ Upstream commit b4afd4b90a7cfe54c7cd9db49e3c36d552325eac ]

We use ipa_cmd_header_valid() to ensure certain values we will program into hardware are within range, well in advance of when we actually program them. This way we avoid having to check for errors when we actually program the hardware.

Unfortunately the dev_err() call for a bad offset value does not supply the arguments to match the format specifiers properly. Fix this.

There was also supposed to be a check to ensure the size to be programmed fits in the field that holds it. Add this missing check.

Rearrange the way we ensure the header table fits in overall IPA memory range.

Finally, update ipa_cmd_table_valid() so the format of messages printed for errors matches what's done in ipa_cmd_header_valid().

Signed-off-by: Alex Elder elder@linaro.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ipa/ipa_cmd.c | 50 ++++++++++++++++++++++++++------------- 1 file changed, 33 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ipa/ipa_cmd.c b/drivers/net/ipa/ipa_cmd.c index d92dd3f09b73..b59d1948114a 100644 --- a/drivers/net/ipa/ipa_cmd.c +++ b/drivers/net/ipa/ipa_cmd.c @@ -175,21 +175,23 @@ bool ipa_cmd_table_valid(struct ipa *ipa, const struct ipa_mem *mem, : field_max(IP_FLTRT_FLAGS_NHASH_ADDR_FMASK); if (mem->offset > offset_max || ipa->mem_offset > offset_max - mem->offset) { - dev_err(dev, "IPv%c %s%s table region offset too large " - "(0x%04x + 0x%04x > 0x%04x)\n", - ipv6 ? '6' : '4', hashed ? "hashed " : "", - route ? "route" : "filter", - ipa->mem_offset, mem->offset, offset_max); + dev_err(dev, "IPv%c %s%s table region offset too large\n", + ipv6 ? '6' : '4', hashed ? "hashed " : "", + route ? "route" : "filter"); + dev_err(dev, " (0x%04x + 0x%04x > 0x%04x)\n", + ipa->mem_offset, mem->offset, offset_max); + return false; }

if (mem->offset > ipa->mem_size || mem->size > ipa->mem_size - mem->offset) { - dev_err(dev, "IPv%c %s%s table region out of range " - "(0x%04x + 0x%04x > 0x%04x)\n", - ipv6 ? '6' : '4', hashed ? "hashed " : "", - route ? "route" : "filter", - mem->offset, mem->size, ipa->mem_size); + dev_err(dev, "IPv%c %s%s table region out of range\n", + ipv6 ? '6' : '4', hashed ? "hashed " : "", + route ? "route" : "filter"); + dev_err(dev, " (0x%04x + 0x%04x > 0x%04x)\n", + mem->offset, mem->size, ipa->mem_size); + return false; }

@@ -205,22 +207,36 @@ static bool ipa_cmd_header_valid(struct ipa *ipa) u32 size_max; u32 size;

+ /* In ipa_cmd_hdr_init_local_add() we record the offset and size + * of the header table memory area. Make sure the offset and size + * fit in the fields that need to hold them, and that the entire + * range is within the overall IPA memory range. + */ offset_max = field_max(HDR_INIT_LOCAL_FLAGS_HDR_ADDR_FMASK); if (mem->offset > offset_max || ipa->mem_offset > offset_max - mem->offset) { - dev_err(dev, "header table region offset too large " - "(0x%04x + 0x%04x > 0x%04x)\n", - ipa->mem_offset + mem->offset, offset_max); + dev_err(dev, "header table region offset too large\n"); + dev_err(dev, " (0x%04x + 0x%04x > 0x%04x)\n", + ipa->mem_offset, mem->offset, offset_max); + return false; }

size_max = field_max(HDR_INIT_LOCAL_FLAGS_TABLE_SIZE_FMASK); size = ipa->mem[IPA_MEM_MODEM_HEADER].size; size += ipa->mem[IPA_MEM_AP_HEADER].size; - if (mem->offset > ipa->mem_size || size > ipa->mem_size - mem->offset) { - dev_err(dev, "header table region out of range " - "(0x%04x + 0x%04x > 0x%04x)\n", - mem->offset, size, ipa->mem_size); + + if (size > size_max) { + dev_err(dev, "header table region size too large\n"); + dev_err(dev, " (0x%04x > 0x%08x)\n", size, size_max); + + return false; + } + if (size > ipa->mem_size || mem->offset > ipa->mem_size - size) { + dev_err(dev, "header table region out of range\n"); + dev_err(dev, " (0x%04x + 0x%04x > 0x%04x)\n", + mem->offset, size, ipa->mem_size); + return false; }

From: Andre Przywara andre.przywara@arm.com

[ Upstream commit 7011d72588d16a9e5f5d85acbc8b10019809599c ]

The "First Fault Register" (FFR) is an SVE register that mimics a predicate register, but clears bits when a load or store fails to handle an element of a vector. The supposed usage scenario is to initialise this register (using SETFFR), then *read* it later on to learn about elements that failed to load or store. Explicit writes to this register using the WRFFR instruction are only supposed to *restore* values previously read from the register (for context-switching only). As the manual describes, this register holds only certain values, it: "... contains a monotonic predicate value, in which starting from bit 0 there are zero or more 1 bits, followed only by 0 bits in any remaining bit positions." Any other value is UNPREDICTABLE and is not supposed to be "restored" into the register.

The SVE test currently tries to write a signature pattern into the register, which is *not* a canonical FFR value. Apparently the existing setups treat UNPREDICTABLE as "read-as-written", but a new implementation actually only stores canonical values. As a consequence, the sve-test fails immediately when comparing the FFR value: ----------- # ./sve-test Vector length: 128 bits PID: 207 Mismatch: PID=207, iteration=0, reg=48 Expected [cf00] Got [0f00] Aborted -----------

Fix this by only populating the FFR with proper canonical values. Effectively the requirement described above limits us to 17 unique values over 16 bits worth of FFR, so we condense our signature down to 4 bits (2 bits from the PID, 2 bits from the generation) and generate the canonical pattern from it. Any bits describing elements above the minimum 128 bit are set to 0.

This aligns the FFR usage to the architecture and fixes the test on microarchitectures implementing FFR in a more restricted way.

Signed-off-by: Andre Przywara andre.przywara@arm.com Reviwed-by: Mark Brown broonie@kernel.org Link: https://lore.kernel.org/r/20210319120128.29452-1-andre.przywara@arm.com Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/arm64/fp/sve-test.S | 22 ++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/arm64/fp/sve-test.S b/tools/testing/selftests/arm64/fp/sve-test.S index f95074c9b48b..07f14e279a90 100644 --- a/tools/testing/selftests/arm64/fp/sve-test.S +++ b/tools/testing/selftests/arm64/fp/sve-test.S @@ -284,16 +284,28 @@ endfunction // Set up test pattern in the FFR // x0: pid // x2: generation +// +// We need to generate a canonical FFR value, which consists of a number of +// low "1" bits, followed by a number of zeros. This gives us 17 unique values +// per 16 bits of FFR, so we create a 4 bit signature out of the PID and +// generation, and use that as the initial number of ones in the pattern. +// We fill the upper lanes of FFR with zeros. // Beware: corrupts P0. function setup_ffr mov x4, x30

- bl pattern + and w0, w0, #0x3 + bfi w0, w2, #2, #2 + mov w1, #1 + lsl w1, w1, w0 + sub w1, w1, #1 + ldr x0, =ffrref - ldr x1, =scratch - rdvl x2, #1 - lsr x2, x2, #3 - bl memcpy + strh w1, [x0], 2 + rdvl x1, #1 + lsr x1, x1, #3 + sub x1, x1, #2 + bl memclr

mov x0, #0 ldr x1, =ffrref

From: Arnd Bergmann arnd@arndb.de

[ Upstream commit 9fcb51c14da2953de585c5c6e50697b8a6e91a7b ]

The new Ubuntu GCC packages turn on -fcf-protection globally, which causes a build failure in the x86 realmode code:

cc1: error: ‘-fcf-protection’ is not compatible with this target

Turn it off explicitly on compilers that understand this option.

Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Ingo Molnar mingo@kernel.org Link: https://lore.kernel.org/r/20210323124846.1584944-1-arnd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 0a6d497221e4..9c86f2dc16b1 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -34,7 +34,7 @@ M16_CFLAGS := $(call cc-option, -m16, $(CODE16GCC_CFLAGS)) REALMODE_CFLAGS := $(M16_CFLAGS) -g -Os -DDISABLE_BRANCH_PROFILING \ -Wall -Wstrict-prototypes -march=i386 -mregparm=3 \ -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ - -mno-mmx -mno-sse + -mno-mmx -mno-sse $(call cc-option,-fcf-protection=none)

REALMODE_CFLAGS += -ffreestanding REALMODE_CFLAGS += -fno-stack-protector

From: "David E. Box" david.e.box@linux.intel.com

[ Upstream commit d1635448f1105e549b4041aab930dbc6945fc635 ]

Due to a HW limitation, the Latency Tolerance Reporting (LTR) value programmed in the Tiger Lake GBE controller is not large enough to allow the platform to enter Package C10, which in turn prevents the platform from achieving its low power target during suspend-to-idle. Ignore the GBE LTR value on Tiger Lake. LTR ignore functionality is currently performed solely by a debugfs write call. Split out the LTR code into its own function that can be called by both the debugfs writer and by this work around.

Signed-off-by: David E. Box david.e.box@linux.intel.com Reviewed-by: Sasha Neftin sasha.neftin@intel.com Cc: intel-wired-lan@lists.osuosl.org Reviewed-by: Rajneesh Bhardwaj irenic.rajneesh@gmail.com Link: https://lore.kernel.org/r/20210319201844.3305399-2-david.e.box@linux.intel.c... Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/intel_pmc_core.c | 50 +++++++++++++++++++-------- 1 file changed, 35 insertions(+), 15 deletions(-)

diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c index 3e5fe66333f1..e06b36e87a33 100644 --- a/drivers/platform/x86/intel_pmc_core.c +++ b/drivers/platform/x86/intel_pmc_core.c @@ -863,34 +863,45 @@ static int pmc_core_pll_show(struct seq_file *s, void *unused) } DEFINE_SHOW_ATTRIBUTE(pmc_core_pll);

-static ssize_t pmc_core_ltr_ignore_write(struct file *file, - const char __user *userbuf, - size_t count, loff_t *ppos) +static int pmc_core_send_ltr_ignore(u32 value) { struct pmc_dev *pmcdev = &pmc; const struct pmc_reg_map *map = pmcdev->map; - u32 val, buf_size, fd; - int err; - - buf_size = count < 64 ? count : 64; - - err = kstrtou32_from_user(userbuf, buf_size, 10, &val); - if (err) - return err; + u32 reg; + int err = 0;

mutex_lock(&pmcdev->lock);

- if (val > map->ltr_ignore_max) { + if (value > map->ltr_ignore_max) { err = -EINVAL; goto out_unlock; }

- fd = pmc_core_reg_read(pmcdev, map->ltr_ignore_offset); - fd |= (1U << val); - pmc_core_reg_write(pmcdev, map->ltr_ignore_offset, fd); + reg = pmc_core_reg_read(pmcdev, map->ltr_ignore_offset); + reg |= BIT(value); + pmc_core_reg_write(pmcdev, map->ltr_ignore_offset, reg);

out_unlock: mutex_unlock(&pmcdev->lock); + + return err; +} + +static ssize_t pmc_core_ltr_ignore_write(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + u32 buf_size, value; + int err; + + buf_size = min_t(u32, count, 64); + + err = kstrtou32_from_user(userbuf, buf_size, 10, &value); + if (err) + return err; + + err = pmc_core_send_ltr_ignore(value); + return err == 0 ? count : err; }

@@ -1244,6 +1255,15 @@ static int pmc_core_probe(struct platform_device *pdev) pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit(); dmi_check_system(pmc_core_dmi_table);

+ /* + * On TGL, due to a hardware limitation, the GBE LTR blocks PC10 when + * a cable is attached. Tell the PMC to ignore it. + */ + if (pmcdev->map == &tgl_reg_map) { + dev_dbg(&pdev->dev, "ignoring GBE LTR\n"); + pmc_core_send_ltr_ignore(3); + } + pmc_core_dbgfs_register(pmcdev);

device_initialized = true;

From: Martin Wilck mwilck@suse.com

[ Upstream commit 36fa766faa0c822c860e636fe82b1affcd022974 ]

If pscsi_map_sg() fails, make sure to drop references to already allocated bios.

Link: https://lore.kernel.org/r/20210323212431.15306-2-mwilck@suse.com Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Lee Duncan lduncan@suse.com Signed-off-by: Martin Wilck mwilck@suse.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/target/target_core_pscsi.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 4e37fa9b409d..723a51a3f431 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -939,6 +939,14 @@ pscsi_map_sg(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,

return 0; fail: + if (bio) + bio_put(bio); + while (req->bio) { + bio = req->bio; + req->bio = bio->bi_next; + bio_put(bio); + } + req->biotail = NULL; return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; }

From: Sergei Trofimovich slyfox@gentoo.org

[ Upstream commit f2a419cf495f95cac49ea289318b833477e1a0e2 ]

The sleep warning happens at early boot right at secondary CPU activation bootup:

smp: Bringing up secondary CPUs ... BUG: sleeping function called from invalid context at mm/page_alloc.c:4942 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.12.0-rc2-00007-g79e228d0b611-dirty #99 .. Call Trace: show_stack+0x90/0xc0 dump_stack+0x150/0x1c0 ___might_sleep+0x1c0/0x2a0 __might_sleep+0xa0/0x160 __alloc_pages_nodemask+0x1a0/0x600 alloc_page_interleave+0x30/0x1c0 alloc_pages_current+0x2c0/0x340 __get_free_pages+0x30/0xa0 ia64_mca_cpu_init+0x2d0/0x3a0 cpu_init+0x8b0/0x1440 start_secondary+0x60/0x700 start_ap+0x750/0x780 Fixed BSP b0 value from CPU 1

As I understand interrupts are not enabled yet and system has a lot of memory. There is little chance to sleep and switch to GFP_ATOMIC should be a no-op.

Link: https://lkml.kernel.org/r/20210315085045.204414-1-slyfox@gentoo.org Signed-off-by: Sergei Trofimovich slyfox@gentoo.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/ia64/kernel/mca.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 2703f7795672..bd0a51dc345a 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -1822,7 +1822,7 @@ ia64_mca_cpu_init(void *cpu_data) data = mca_bootmem(); first_time = 0; } else - data = (void *)__get_free_pages(GFP_KERNEL, + data = (void *)__get_free_pages(GFP_ATOMIC, get_order(sz)); if (!data) panic("Could not allocate MCA memory for cpu %d\n",

From: Ronnie Sahlberg lsahlber@redhat.com

[ Upstream commit cee8f4f6fcabfdf229542926128e9874d19016d5 ]

RHBZ: 1933527

Under SMB1 + POSIX, if an inode is reused on a server after we have read and cached a part of a file, when we then open the new file with the re-cycled inode there is a chance that we may serve the old data out of cache to the application. This only happens for SMB1 (deprecated) and when posix are used. The simplest solution to avoid this race is to force a revalidate on smb1-posix open.

Signed-off-by: Ronnie Sahlberg lsahlber@redhat.com Reviewed-by: Paulo Alcantara (SUSE) pc@cjr.nz Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/file.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c index be46fab4c96d..da057570bb93 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -164,6 +164,7 @@ int cifs_posix_open(char *full_path, struct inode **pinode, goto posix_open_ret; } } else { + cifs_revalidate_mapping(*pinode); cifs_fattr_to_inode(*pinode, &fattr); }

From: Pavel Begunkov asml.silence@gmail.com

[ Upstream commit 1ee4160c73b2102a52bc97a4128a89c34821414f ]

When we cancel a timeout we should emit a sensible return code, like -ECANCELED but not 0, otherwise it may trick users.

Signed-off-by: Pavel Begunkov asml.silence@gmail.com Link: https://lore.kernel.org/r/7b0ad1065e3bd1994722702bd0ba9e7bc9b0683b.161669699... Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/io_uring.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/fs/io_uring.c b/fs/io_uring.c index 06e9c2181995..f635749766a7 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -1489,7 +1489,7 @@ static void io_queue_async_work(struct io_kiocb *req) io_queue_linked_timeout(link); }

-static void io_kill_timeout(struct io_kiocb *req) +static void io_kill_timeout(struct io_kiocb *req, int status) { struct io_timeout_data *io = req->async_data; int ret; @@ -1499,7 +1499,7 @@ static void io_kill_timeout(struct io_kiocb *req) atomic_set(&req->ctx->cq_timeouts, atomic_read(&req->ctx->cq_timeouts) + 1); list_del_init(&req->timeout.list); - io_cqring_fill_event(req, 0); + io_cqring_fill_event(req, status); io_put_req_deferred(req, 1); } } @@ -1516,7 +1516,7 @@ static bool io_kill_timeouts(struct io_ring_ctx *ctx, struct task_struct *tsk, spin_lock_irq(&ctx->completion_lock); list_for_each_entry_safe(req, tmp, &ctx->timeout_list, timeout.list) { if (io_match_task(req, tsk, files)) { - io_kill_timeout(req); + io_kill_timeout(req, -ECANCELED); canceled++; } } @@ -1568,7 +1568,7 @@ static void io_flush_timeouts(struct io_ring_ctx *ctx) break;

list_del_init(&req->timeout.list); - io_kill_timeout(req); + io_kill_timeout(req, 0); } while (!list_empty(&ctx->timeout_list));

ctx->cq_last_tm_flush = seq;