From: Matt Ranostay matt.ranostay@konsulko.com

[ Upstream commit ce054546cc2c26891cefa2f284d90d93b52205de ]

ADC channel 0 photodiode detects both infrared + visible light, but ADC channel 1 just detects infrared. However, the latter is a bit more sensitive in that range so complete darkness or low light causes a error condition in which the chan0 - chan1 is negative that results in a -EAGAIN.

This patch changes the resulting lux1_input sysfs attribute message from "Resource temporarily unavailable" to a user-grokable lux value of 0.

Cc: Arnd Bergmann arnd@arndb.de Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Matt Ranostay matt.ranostay@konsulko.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/misc/tsl2550.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/tsl2550.c b/drivers/misc/tsl2550.c index b00335652e52..59b9e46c0a7b 100644 --- a/drivers/misc/tsl2550.c +++ b/drivers/misc/tsl2550.c @@ -177,7 +177,7 @@ static int tsl2550_calculate_lux(u8 ch0, u8 ch1) } else lux = 0; else - return -EAGAIN; + return 0;

/* LUX range check */ return lux > TSL2550_MAX_LUX ? TSL2550_MAX_LUX : lux;

From: Johan Hovold johan@kernel.org

[ Upstream commit a420b5d939ee58f1d950f0ea782834056520aeaa ]

Make sure to return -EIO in case of a short modem-status read request.

While at it, split the debug message to not include the (zeroed) transfer-buffer content in case of errors.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/usb/serial/kobil_sct.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 02c420af251e..d056bdb42771 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -396,12 +396,20 @@ static int kobil_tiocmget(struct tty_struct *tty) transfer_buffer_length, KOBIL_TIMEOUT);

- dev_dbg(&port->dev, "%s - Send get_status_line_state URB returns: %i. Statusline: %02x\n", - __func__, result, transfer_buffer[0]); + dev_dbg(&port->dev, "Send get_status_line_state URB returns: %i\n", + result); + if (result < 1) { + if (result >= 0) + result = -EIO; + goto out_free; + } + + dev_dbg(&port->dev, "Statusline: %02x\n", transfer_buffer[0]);

result = 0; if ((transfer_buffer[0] & SUSBCR_GSL_DSR) != 0) result = TIOCM_DSR; +out_free: kfree(transfer_buffer); return result; }

From: Sylwester Nawrocki s.nawrocki@samsung.com

[ Upstream commit 7c1b9a5aeed91bef98988ac0fcf38c8c1f4f9a3a ]

This patch fixes potential NULL pointer dereference as indicated by the following static checker warning:

drivers/media/platform/exynos4-is/fimc-isp-video.c:408 isp_video_try_fmt_mplane() error: NULL dereference inside function '__isp_video_try_fmt(isp, &f->fmt.pix_mp, (0))()'.

Fixes: 34947b8aebe3: ("[media] exynos4-is: Add the FIMC-IS ISP capture DMA driver")

Reported-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/media/platform/exynos4-is/fimc-isp-video.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.c b/drivers/media/platform/exynos4-is/fimc-isp-video.c index 76b6b4d14616..322677f2cbb0 100644 --- a/drivers/media/platform/exynos4-is/fimc-isp-video.c +++ b/drivers/media/platform/exynos4-is/fimc-isp-video.c @@ -389,12 +389,17 @@ static void __isp_video_try_fmt(struct fimc_isp *isp, struct v4l2_pix_format_mplane *pixm, const struct fimc_fmt **fmt) { - *fmt = fimc_isp_find_format(&pixm->pixelformat, NULL, 2); + const struct fimc_fmt *__fmt; + + __fmt = fimc_isp_find_format(&pixm->pixelformat, NULL, 2); + + if (fmt) + *fmt = __fmt;

pixm->colorspace = V4L2_COLORSPACE_SRGB; pixm->field = V4L2_FIELD_NONE; - pixm->num_planes = (*fmt)->memplanes; - pixm->pixelformat = (*fmt)->fourcc; + pixm->num_planes = __fmt->memplanes; + pixm->pixelformat = __fmt->fourcc; /* * TODO: double check with the docmentation these width/height * constraints are correct.

From: Andy Shevchenko andriy.shevchenko@linux.intel.com

[ Upstream commit dbd0fbc76c77daac08ddd245afdcbade0d506e19 ]

Add a missing header otherwise compiler warns about missed prototype:

CC arch/x86/kernel/tsc_msr.o arch/x86/kernel/tsc_msr.c:73:15: warning: no previous prototype for ‘cpu_khz_from_msr’ [-Wmissing-prototypes] unsigned long cpu_khz_from_msr(void) ^~~~~~~~~~~~~~~~

Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: "H. Peter Anvin" hpa@zytor.com Cc: Pavel Tatashin pasha.tatashin@oracle.com Link: https://lkml.kernel.org/r/20180629193113.84425-4-andriy.shevchenko@linux.int... Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- arch/x86/kernel/tsc_msr.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/arch/x86/kernel/tsc_msr.c b/arch/x86/kernel/tsc_msr.c index 6aa0f4d9eea6..0e37e369b3a0 100644 --- a/arch/x86/kernel/tsc_msr.c +++ b/arch/x86/kernel/tsc_msr.c @@ -21,6 +21,7 @@ #include <asm/setup.h> #include <asm/apic.h> #include <asm/param.h> +#include <asm/tsc.h>

/* CPU reference clock frequency: in KHz */ #define FREQ_83 83200

From: Julia Lawall Julia.Lawall@lip6.fr

[ Upstream commit d3ac5598c5010a8999978ebbcca3b1c6188ca36b ]

Comparing an int to a size, which is unsigned, causes the int to become unsigned, giving the wrong result. usb_get_descriptor can return a negative error code.

A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/)

// <smpl> @@ int x; expression e,e1; identifier f; @@

*x = f(...); ... when != x = e1 when != if (x < 0 || ...) { ... return ...; } *x < sizeof(e) // </smpl>

Signed-off-by: Julia Lawall Julia.Lawall@lip6.fr Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/usb/wusbcore/security.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c index cc74d669c802..63ab92af2473 100644 --- a/drivers/usb/wusbcore/security.c +++ b/drivers/usb/wusbcore/security.c @@ -230,7 +230,7 @@ int wusb_dev_sec_add(struct wusbhc *wusbhc,

result = usb_get_descriptor(usb_dev, USB_DT_SECURITY, 0, secd, sizeof(*secd)); - if (result < sizeof(*secd)) { + if (result < (int)sizeof(*secd)) { dev_err(dev, "Can't read security descriptor or " "not enough data: %d\n", result); goto out;

From: Thomas Gleixner tglx@linutronix.de

[ Upstream commit 5f936e19cc0ef97dbe3a56e9498922ad5ba1edef ]

Air Icy reported:

UBSAN: Undefined behaviour in kernel/time/alarmtimer.c:811:7 signed integer overflow: 1529859276030040771 + 9223372036854775807 cannot be represented in type 'long long int' Call Trace: alarm_timer_nsleep+0x44c/0x510 kernel/time/alarmtimer.c:811 __do_sys_clock_nanosleep kernel/time/posix-timers.c:1235 [inline] __se_sys_clock_nanosleep kernel/time/posix-timers.c:1213 [inline] __x64_sys_clock_nanosleep+0x326/0x4e0 kernel/time/posix-timers.c:1213 do_syscall_64+0xb8/0x3a0 arch/x86/entry/common.c:290

alarm_timer_nsleep() uses ktime_add() to add the current time and the relative expiry value. ktime_add() has no sanity checks so the addition can overflow when the relative timeout is large enough.

Use ktime_add_safe() which has the necessary sanity checks in place and limits the result to the valid range.

Fixes: 9a7adcf5c6de ("timers: Posix interface for alarm-timers") Reported-by: Team OWL337 icytxw@gmail.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: John Stultz john.stultz@linaro.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1807020926360.1595@nanos.tec.linut... Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- kernel/time/alarmtimer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c index 119847b93ba6..0436d5edbccf 100644 --- a/kernel/time/alarmtimer.c +++ b/kernel/time/alarmtimer.c @@ -776,7 +776,8 @@ static int alarm_timer_nsleep(const clockid_t which_clock, int flags, /* Convert (if necessary) to absolute time */ if (flags != TIMER_ABSTIME) { ktime_t now = alarm_bases[type].gettime(); - exp = ktime_add(now, exp); + + exp = ktime_add_safe(now, exp); }

if (alarmtimer_do_nsleep(&alarm, exp))

From: Nicholas Mc Guire hofrat@osadl.org

[ Upstream commit 222bce5eb88d1af656419db04bcd84b2419fb900 ]

Both calls to of_find_node_by_name() and of_get_next_child() return a node pointer with refcount incremented thus it must be explicidly decremented here after the last usage. As we are assured to have a refcounted np either from the initial of_find_node_by_name(NULL, name); or from the of_get_next_child(gpio, np) in the while loop if we reached the error code path below, an x of_node_put(np) is needed.

Signed-off-by: Nicholas Mc Guire hofrat@osadl.org Fixes: commit f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- sound/aoa/core/gpio-feature.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/aoa/core/gpio-feature.c b/sound/aoa/core/gpio-feature.c index f34153962d07..585b594bd838 100644 --- a/sound/aoa/core/gpio-feature.c +++ b/sound/aoa/core/gpio-feature.c @@ -88,8 +88,10 @@ static struct device_node *get_gpio(char *name, }

reg = of_get_property(np, "reg", NULL); - if (!reg) + if (!reg) { + of_node_put(np); return NULL; + }

*gpioptr = *reg;

From: Akinobu Mita akinobu.mita@gmail.com

[ Upstream commit 22216ec41e919682c15345e95928f266e8ba6f9e ]

The banding filter ON/OFF is controlled via bit 5 of COM8 register. It is attempted to be enabled in ov772x_set_params() by the following line.

ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1);

But this unexpectedly results disabling the banding filter, because the mask and set bits are exclusive.

On the other hand, ov772x_s_ctrl() correctly sets the bit by:

ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, BNDF_ON_OFF);

The same fix was already applied to non-soc_camera version of ov772x driver in the commit commit a024ee14cd36 ("media: ov772x: correct setting of banding filter")

Cc: Jacopo Mondi jacopo+renesas@jmondi.org Cc: Laurent Pinchart laurent.pinchart@ideasonboard.com Cc: Hans Verkuil hans.verkuil@cisco.com Signed-off-by: Akinobu Mita akinobu.mita@gmail.com Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/media/i2c/soc_camera/ov772x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/soc_camera/ov772x.c b/drivers/media/i2c/soc_camera/ov772x.c index 970a04e1e56e..a08502766474 100644 --- a/drivers/media/i2c/soc_camera/ov772x.c +++ b/drivers/media/i2c/soc_camera/ov772x.c @@ -834,7 +834,7 @@ static int ov772x_set_params(struct ov772x_priv *priv, * set COM8 */ if (priv->band_filter) { - ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1); + ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, BNDF_ON_OFF); if (!ret) ret = ov772x_mask_set(client, BDBASE, 0xff, 256 - priv->band_filter);

From: Zhouyang Jia jiazhouyang09@gmail.com

[ Upstream commit 85c634e919bd6ef17427f26a52920aeba12e16ee ]

When pcmcia_loop_config fails, the lack of error-handling code may cause unexpected results.

This patch adds error-handling code after calling pcmcia_loop_config.

Signed-off-by: Zhouyang Jia jiazhouyang09@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/tty/serial/8250/serial_cs.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c index 4d180c9423ef..1a14948c86d6 100644 --- a/drivers/tty/serial/8250/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c @@ -629,8 +629,10 @@ static int serial_config(struct pcmcia_device * link) (link->has_func_id) && (link->socket->pcmcia_pfc == 0) && ((link->func_id == CISTPL_FUNCID_MULTI) || - (link->func_id == CISTPL_FUNCID_SERIAL))) - pcmcia_loop_config(link, serial_check_for_multi, info); + (link->func_id == CISTPL_FUNCID_SERIAL))) { + if (pcmcia_loop_config(link, serial_check_for_multi, info)) + goto failed; + }

/* * Apply any multi-port quirk.

From: Kai-Heng Feng kai.heng.feng@canonical.com

[ Upstream commit 1adca4b0cd65c14cb8b8c9c257720385869c3d5f ]

This patch can make audio controller in AMD Raven Ridge gets runtime suspended to D3, to save ~1W power when it's not in use.

Cc: Vijendar Mukunda Vijendar.Mukunda@amd.com Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- sound/pci/hda/hda_intel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 5b89e110f6d4..7218e40f4d9f 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2094,7 +2094,8 @@ static const struct pci_device_id azx_ids[] = { .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB }, /* AMD Raven */ { PCI_DEVICE(0x1022, 0x15e3), - .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB }, + .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB | + AZX_DCAPS_PM_RUNTIME }, /* ATI HDMI */ { PCI_DEVICE(0x1002, 0x0002), .driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI_NS },

From: Ethan Tuttle ethan@ethantuttle.com

[ Upstream commit d0d378ff451a66e486488eec842e507d28145813 ]

With CONFIG_FORTIFY_SOURCE, memcpy uses the declared size of operands to detect buffer overflows. If src or dest is declared as a char, attempts to copy more than byte will result in a fortify_panic().

Address this problem in mvebu_setup_boot_addr_wa() by declaring mvebu_boot_wa_start and mvebu_boot_wa_end as character arrays. Also remove a couple addressof operators to avoid "arithmetic on pointer to an incomplete type" compiler error.

See commit 54a7d50b9205 ("x86: mark kprobe templates as character arrays, not single characters") for a similar fix.

Fixes "detected buffer overflow in memcpy" error during init on some mvebu systems (armada-370-xp, armada-375):

(fortify_panic) from (mvebu_setup_boot_addr_wa+0xb0/0xb4) (mvebu_setup_boot_addr_wa) from (mvebu_v7_cpu_pm_init+0x154/0x204) (mvebu_v7_cpu_pm_init) from (do_one_initcall+0x7c/0x1a8) (do_one_initcall) from (kernel_init_freeable+0x1bc/0x254) (kernel_init_freeable) from (kernel_init+0x8/0x114) (kernel_init) from (ret_from_fork+0x14/0x2c)

Signed-off-by: Ethan Tuttle ethan@ethantuttle.com Tested-by: Ethan Tuttle ethan@ethantuttle.com Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- arch/arm/mach-mvebu/pmsu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 6f8a85c5965c..7bbe32e56bbc 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -117,8 +117,8 @@ void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr) PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); }

-extern unsigned char mvebu_boot_wa_start; -extern unsigned char mvebu_boot_wa_end; +extern unsigned char mvebu_boot_wa_start[]; +extern unsigned char mvebu_boot_wa_end[];

/* * This function sets up the boot address workaround needed for SMP @@ -131,7 +131,7 @@ int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target, phys_addr_t resume_addr_reg) { void __iomem *sram_virt_base; - u32 code_len = &mvebu_boot_wa_end - &mvebu_boot_wa_start; + u32 code_len = mvebu_boot_wa_end - mvebu_boot_wa_start;

mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE); mvebu_mbus_add_window_by_id(crypto_eng_target, crypto_eng_attribute,

From: Zhouyang Jia jiazhouyang09@gmail.com

[ Upstream commit 44d4d51de9a3534a2b63d69efda02a10e66541e4 ]

When sysfs_create_group fails, the lack of error-handling code may cause unexpected results.

This patch adds error-handling code after calling sysfs_create_group.

Signed-off-by: Zhouyang Jia jiazhouyang09@gmail.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/hid/hid-ntrig.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c index 600f2075512f..dc497b633e28 100644 --- a/drivers/hid/hid-ntrig.c +++ b/drivers/hid/hid-ntrig.c @@ -953,6 +953,8 @@ static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id)

ret = sysfs_create_group(&hdev->dev.kobj, &ntrig_attribute_group); + if (ret) + hid_err(hdev, "cannot create sysfs group\n");

return 0; err_free:

From: Ondrej Mosnáček omosnace@redhat.com

[ Upstream commit af85d1772e31fed34165a1b3decef340cf4080c0 ]

The audit_filter_rules() function in auditsc.c used the in_[e]group_p() functions to check GID/EGID match, but these functions use the current task's credentials, while the comparison should use the credentials of the task given to audit_filter_rules() as a parameter (tsk).

Note that we can use group_search(cred->group_info, ...) as a replacement for both in_group_p and in_egroup_p as these functions only compare the parameter to cred->fsgid/egid and then call group_search.

In fact, the usage of in_group_p was even more incorrect: it compares to cred->fsgid (which is usually equal to cred->egid) and not cred->gid.

GitHub issue: https://github.com/linux-audit/audit-kernel/issues/82

Fixes: 37eebe39c973 ("audit: improve GID/EGID comparation logic") Signed-off-by: Ondrej Mosnacek omosnace@redhat.com Signed-off-by: Paul Moore paul@paul-moore.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- kernel/auditsc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 3a6e01013b34..889ba4c9a5e3 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -484,20 +484,20 @@ static int audit_filter_rules(struct task_struct *tsk, result = audit_gid_comparator(cred->gid, f->op, f->gid); if (f->op == Audit_equal) { if (!result) - result = in_group_p(f->gid); + result = groups_search(cred->group_info, f->gid); } else if (f->op == Audit_not_equal) { if (result) - result = !in_group_p(f->gid); + result = !groups_search(cred->group_info, f->gid); } break; case AUDIT_EGID: result = audit_gid_comparator(cred->egid, f->op, f->gid); if (f->op == Audit_equal) { if (!result) - result = in_egroup_p(f->gid); + result = groups_search(cred->group_info, f->gid); } else if (f->op == Audit_not_equal) { if (result) - result = !in_egroup_p(f->gid); + result = !groups_search(cred->group_info, f->gid); } break; case AUDIT_SGID:

From: Jessica Yu jeyu@kernel.org

[ Upstream commit 9f2d1e68cf4d641def734adaccfc3823d3575e6c ]

Livepatch modules are special in that we preserve their entire symbol tables in order to be able to apply relocations after module load. The unwanted side effect of this is that undefined (SHN_UNDEF) symbols of livepatch modules are accessible via the kallsyms api and this can confuse symbol resolution in livepatch (klp_find_object_symbol()) and cause subtle bugs in livepatch.

Have the module kallsyms api skip over SHN_UNDEF symbols. These symbols are usually not available for normal modules anyway as we cut down their symbol tables to just the core (non-undefined) symbols, so this should really just affect livepatch modules. Note that this patch doesn't affect the display of undefined symbols in /proc/kallsyms.

Reported-by: Josh Poimboeuf jpoimboe@redhat.com Tested-by: Josh Poimboeuf jpoimboe@redhat.com Reviewed-by: Josh Poimboeuf jpoimboe@redhat.com Signed-off-by: Jessica Yu jeyu@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- kernel/module.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/kernel/module.c b/kernel/module.c index 737d53099360..bc417377930b 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -3592,7 +3592,7 @@ static unsigned long mod_find_symname(struct module *mod, const char *name)

for (i = 0; i < kallsyms->num_symtab; i++) if (strcmp(name, symname(kallsyms, i)) == 0 && - kallsyms->symtab[i].st_info != 'U') + kallsyms->symtab[i].st_shndx != SHN_UNDEF) return kallsyms->symtab[i].st_value; return 0; } @@ -3636,6 +3636,10 @@ int module_kallsyms_on_each_symbol(int (*fn)(void *, const char *, if (mod->state == MODULE_STATE_UNFORMED) continue; for (i = 0; i < kallsyms->num_symtab; i++) { + + if (kallsyms->symtab[i].st_shndx == SHN_UNDEF) + continue; + ret = fn(data, symname(kallsyms, i), mod, kallsyms->symtab[i].st_value); if (ret != 0)