Fixes the occasional adapter panic when sg_reset is issued with -d, -t, -b and -H flags. Removal of command type HBA_IU_TYPE_SCSI_TM_REQ in aac_hba_send since iu_type, request_id and fib_flags are not populated. Device and target reset handlers made to send TMF commands only when reset_state is 0.

Signed-off-by: Balsundar P balsundar.p@microsemi.com Signed-off-by: Sagar Biradar Sagar.Biradar@microchip.com Reviewed-by: Sagar Biradar Sagar.Biradar@microchip.com --- drivers/scsi/aacraid/commsup.c | 2 +- drivers/scsi/aacraid/linit.c | 34 +++++++++++++++++++++++++--------- 2 files changed, 26 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 5a8a999..5118bee 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -729,7 +729,7 @@ int aac_hba_send(u8 command, struct fib *fibptr, fib_callback callback, hbacmd->request_id = cpu_to_le32((((u32)(fibptr - dev->fibs)) << 2) + 1); fibptr->flags |= FIB_CONTEXT_FLAG_SCSI_CMD; - } else if (command != HBA_IU_TYPE_SCSI_TM_REQ) + } else return -EINVAL;

diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index ee6bc2f..9130e03 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -731,7 +731,11 @@ static int aac_eh_abort(struct scsi_cmnd* cmd) status = aac_hba_send(HBA_IU_TYPE_SCSI_TM_REQ, fib, (fib_callback) aac_hba_callback, (void *) cmd); - + if (status != -EINPROGRESS) { + aac_fib_complete(fib); + aac_fib_free(fib); + return ret; + } /* Wait up to 15 secs for completion */ for (count = 0; count < 15; ++count) { if (cmd->SCp.sent_command) { @@ -910,11 +914,11 @@ static int aac_eh_dev_reset(struct scsi_cmnd *cmd)

info = &aac->hba_map[bus][cid];

- if (info->devtype != AAC_DEVTYPE_NATIVE_RAW && - info->reset_state > 0) + if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW && + !(info->reset_state > 0))) return FAILED;

- pr_err("%s: Host adapter reset request. SCSI hang ?\n", + pr_err("%s: Host device reset request. SCSI hang ?\n", AAC_DRIVERNAME);

fib = aac_fib_alloc(aac); @@ -929,7 +933,12 @@ static int aac_eh_dev_reset(struct scsi_cmnd *cmd) status = aac_hba_send(command, fib, (fib_callback) aac_tmf_callback, (void *) info); - + if (status != -EINPROGRESS) { + info->reset_state = 0; + aac_fib_complete(fib); + aac_fib_free(fib); + return ret; + } /* Wait up to 15 seconds for completion */ for (count = 0; count < 15; ++count) { if (info->reset_state == 0) { @@ -968,11 +977,11 @@ static int aac_eh_target_reset(struct scsi_cmnd *cmd)

info = &aac->hba_map[bus][cid];

- if (info->devtype != AAC_DEVTYPE_NATIVE_RAW && - info->reset_state > 0) + if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW && + !(info->reset_state > 0))) return FAILED;

- pr_err("%s: Host adapter reset request. SCSI hang ?\n", + pr_err("%s: Host target reset request. SCSI hang ?\n", AAC_DRIVERNAME);

fib = aac_fib_alloc(aac); @@ -989,6 +998,13 @@ static int aac_eh_target_reset(struct scsi_cmnd *cmd) (fib_callback) aac_tmf_callback, (void *) info);

+ if (status != -EINPROGRESS) { + info->reset_state = 0; + aac_fib_complete(fib); + aac_fib_free(fib); + return ret; + } + /* Wait up to 15 seconds for completion */ for (count = 0; count < 15; ++count) { if (info->reset_state <= 0) { @@ -1041,7 +1057,7 @@ static int aac_eh_bus_reset(struct scsi_cmnd* cmd) } }

- pr_err("%s: Host adapter reset request. SCSI hang ?\n", AAC_DRIVERNAME); + pr_err("%s: Host bus reset request. SCSI hang ?\n", AAC_DRIVERNAME);

/* * Check the health of the controller