[PATCH AUTOSEL 5.13 01/24] dmaengine: xilinx_dma: Fix read-after-free bug when terminating transfers
From: Adrian Larumbe adrian.martinezlarumbe@imgtec.com
[ Upstream commit 7dd2dd4ff9f3abda601f22b9d01441a0869d20d7 ]
When user calls dmaengine_terminate_sync, the driver will clean up any remaining descriptors for all the pending or active transfers that had previously been submitted. However, this might happen whilst the tasklet is invoking the DMA callback for the last finished transfer, so by the time it returns and takes over the channel's spinlock, the list of completed descriptors it was traversing is no longer valid. This leads to a read-after-free situation.
Fix it by signalling whether a user-triggered termination has happened by means of a boolean variable.
Signed-off-by: Adrian Larumbe adrian.martinezlarumbe@imgtec.com Link: https://lore.kernel.org/r/20210706234338.7696-3-adrian.martinezlarumbe@imgte... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/xilinx/xilinx_dma.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c index 75c0b8e904e5..4b9530a7bf65 100644 --- a/drivers/dma/xilinx/xilinx_dma.c +++ b/drivers/dma/xilinx/xilinx_dma.c @@ -394,6 +394,7 @@ struct xilinx_dma_tx_descriptor { * @genlock: Support genlock mode * @err: Channel has errors * @idle: Check for channel idle + * @terminating: Check for channel being synchronized by user * @tasklet: Cleanup work after irq * @config: Device configuration info * @flush_on_fsync: Flush on Frame sync @@ -431,6 +432,7 @@ struct xilinx_dma_chan { bool genlock; bool err; bool idle; + bool terminating; struct tasklet_struct tasklet; struct xilinx_vdma_config config; bool flush_on_fsync; @@ -1049,6 +1051,13 @@ static void xilinx_dma_chan_desc_cleanup(struct xilinx_dma_chan *chan) /* Run any dependencies, then free the descriptor */ dma_run_dependencies(&desc->async_tx); xilinx_dma_free_tx_descriptor(chan, desc); + + /* + * While we ran a callback the user called a terminate function, + * which takes care of cleaning up any remaining descriptors + */ + if (chan->terminating) + break; }
spin_unlock_irqrestore(&chan->lock, flags); @@ -1965,6 +1974,8 @@ static dma_cookie_t xilinx_dma_tx_submit(struct dma_async_tx_descriptor *tx) if (desc->cyclic) chan->cyclic = true;
+ chan->terminating = false; + spin_unlock_irqrestore(&chan->lock, flags);
return cookie; @@ -2436,6 +2447,7 @@ static int xilinx_dma_terminate_all(struct dma_chan *dchan)
xilinx_dma_chan_reset(chan); /* Remove and free all of the descriptors in the lists */ + chan->terminating = true; xilinx_dma_free_descriptors(chan); chan->idle = true;
From: Yu Kuai yukuai3@huawei.com
[ Upstream commit 1da569fa7ec8cb0591c74aa3050d4ea1397778b4 ]
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by moving the error_pm label above the pm_runtime_put() in the error path.
Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Yu Kuai yukuai3@huawei.com Link: https://lore.kernel.org/r/20210706124521.1371901-1-yukuai3@huawei.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/sh/usb-dmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/sh/usb-dmac.c b/drivers/dma/sh/usb-dmac.c index 8f7ceb698226..1cc06900153e 100644 --- a/drivers/dma/sh/usb-dmac.c +++ b/drivers/dma/sh/usb-dmac.c @@ -855,8 +855,8 @@ static int usb_dmac_probe(struct platform_device *pdev)
error: of_dma_controller_free(pdev->dev.of_node); - pm_runtime_put(&pdev->dev); error_pm: + pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); return ret; }
From: Uwe Kleine-König u.kleine-koenig@pengutronix.de
[ Upstream commit 1d5ccab95f06675a269f4cb223a1e3f6d1ebef42 ]
With the spi device table udev can autoload the spi-mux module in the presence of an spi-mux device.
Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Link: https://lore.kernel.org/r/20210721095321.2165453-1-u.kleine-koenig@pengutron... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-mux.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/spi/spi-mux.c b/drivers/spi/spi-mux.c index 37dfc6e82804..9708b7827ff7 100644 --- a/drivers/spi/spi-mux.c +++ b/drivers/spi/spi-mux.c @@ -167,10 +167,17 @@ static int spi_mux_probe(struct spi_device *spi) return ret; }
+static const struct spi_device_id spi_mux_id[] = { + { "spi-mux" }, + { } +}; +MODULE_DEVICE_TABLE(spi, spi_mux_id); + static const struct of_device_id spi_mux_of_match[] = { { .compatible = "spi-mux" }, { } }; +MODULE_DEVICE_TABLE(of, spi_mux_of_match);
static struct spi_driver spi_mux_driver = { .probe = spi_mux_probe, @@ -178,6 +185,7 @@ static struct spi_driver spi_mux_driver = { .name = "spi-mux", .of_match_table = spi_mux_of_match, }, + .id_table = spi_mux_id, };
module_spi_driver(spi_mux_driver);
From: Harshvardhan Jha harshvardhan.jha@oracle.com
[ Upstream commit 480e93e12aa04d857f7cc2e6fcec181c0d690404 ]
The list_for_each_entry() iterator, "pos" in this code, can never be NULL so the warning will never be printed.
Signed-off-by: Harshvardhan Jha harshvardhan.jha@oracle.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/xfrm/xfrm_ipcomp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/xfrm/xfrm_ipcomp.c b/net/xfrm/xfrm_ipcomp.c index 2e8afe078d61..cb40ff0ff28d 100644 --- a/net/xfrm/xfrm_ipcomp.c +++ b/net/xfrm/xfrm_ipcomp.c @@ -241,7 +241,7 @@ static void ipcomp_free_tfms(struct crypto_comp * __percpu *tfms) break; }
- WARN_ON(!pos); + WARN_ON(list_entry_is_head(pos, &ipcomp_tfms_list, list));
if (--pos->users) return;
From: Dave Gerlach d-gerlach@ti.com
[ Upstream commit 20a6b3fd8e2e2c063b25fbf2ee74d86b898e5087 ]
Based on the latest timing specifications for the TPS65218 from the data sheet, http://www.ti.com/lit/ds/symlink/tps65218.pdf, document SLDS206 from November 2014, we must change the i2c bus speed to better fit within the minimum high SCL time required for proper i2c transfer.
When running at 400khz, measurements show that SCL spends 0.8125 uS/1.666 uS high/low which violates the requirement for minimum high period of SCL provided in datasheet Table 7.6 which is 1 uS. Switching to 100khz gives us 5 uS/5 uS high/low which both fall above the minimum given values for 100 khz, 4.0 uS/4.7 uS high/low.
Without this patch occasionally a voltage set operation from the kernel will appear to have worked but the actual voltage reflected on the PMIC will not have updated, causing problems especially with cpufreq that may update to a higher OPP without actually raising the voltage on DCDC2, leading to a hang.
Signed-off-by: Dave Gerlach d-gerlach@ti.com Signed-off-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/am43x-epos-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 8b696107eef8..d2aebdbc7e0f 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -582,7 +582,7 @@ &i2c0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; - clock-frequency = <400000>; + clock-frequency = <100000>;
tps65218: tps65218@24 { reg = <0x24>;
From: Peter Ujfalusi peter.ujfalusi@gmail.com
[ Upstream commit eda97cb095f2958bbad55684a6ca3e7d7af0176a ]
If the router_xlate can not find the controller in the available DMA devices then it should return with -EPORBE_DEFER in a same way as the of_dma_request_slave_channel() does.
The issue can be reproduced if the event router is registered before the DMA controller itself and a driver would request for a channel before the controller is registered. In of_dma_request_slave_channel(): 1. of_dma_find_controller() would find the dma_router 2. ofdma->of_dma_xlate() would fail and returned NULL 3. -ENODEV is returned as error code
with this patch we would return in this case the correct -EPROBE_DEFER and the client can try to request the channel later.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@gmail.com Link: https://lore.kernel.org/r/20210717190021.21897-1-peter.ujfalusi@gmail.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/of-dma.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/of-dma.c b/drivers/dma/of-dma.c index ec00b20ae8e4..ac61ecda2926 100644 --- a/drivers/dma/of-dma.c +++ b/drivers/dma/of-dma.c @@ -67,8 +67,12 @@ static struct dma_chan *of_dma_router_xlate(struct of_phandle_args *dma_spec, return NULL;
ofdma_target = of_dma_find_controller(&dma_spec_target); - if (!ofdma_target) - return NULL; + if (!ofdma_target) { + ofdma->dma_router->route_free(ofdma->dma_router->dev, + route_data); + chan = ERR_PTR(-EPROBE_DEFER); + goto err; + }
chan = ofdma_target->of_dma_xlate(&dma_spec_target, ofdma_target); if (IS_ERR_OR_NULL(chan)) { @@ -89,6 +93,7 @@ static struct dma_chan *of_dma_router_xlate(struct of_phandle_args *dma_spec, } }
+err: /* * Need to put the node back since the ofdma->of_dma_route_allocate * has taken it for generating the new, translated dma_spec
From: Igor Pylypiv ipylypiv@google.com
[ Upstream commit d712d3fb484b7fa8d1d57e9ca6f134bb9d8c18b1 ]
The TMF timeout timer may trigger at the same time when the response from a controller is being handled. When this happens the SAS task may get freed before the response processing is finished.
Fix this by calling complete() only when SAS_TASK_STATE_DONE is not set.
A similar race condition was fixed in commit b90cd6f2b905 ("scsi: libsas: fix a race condition when smp task timeout")
Link: https://lore.kernel.org/r/20210707185945.35559-1-ipylypiv@google.com Reviewed-by: Vishakha Channapattan vishakhavc@google.com Acked-by: Jack Wang jinpu.wang@ionos.com Signed-off-by: Igor Pylypiv ipylypiv@google.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/pm8001/pm8001_sas.c | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 335cf37e6cb9..2e429e31f1f0 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -684,8 +684,7 @@ int pm8001_dev_found(struct domain_device *dev)
void pm8001_task_done(struct sas_task *task) { - if (!del_timer(&task->slow_task->timer)) - return; + del_timer(&task->slow_task->timer); complete(&task->slow_task->completion); }
@@ -693,9 +692,14 @@ static void pm8001_tmf_timedout(struct timer_list *t) { struct sas_task_slow *slow = from_timer(slow, t, timer); struct sas_task *task = slow->task; + unsigned long flags;
- task->task_state_flags |= SAS_TASK_STATE_ABORTED; - complete(&task->slow_task->completion); + spin_lock_irqsave(&task->task_state_lock, flags); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { + task->task_state_flags |= SAS_TASK_STATE_ABORTED; + complete(&task->slow_task->completion); + } + spin_unlock_irqrestore(&task->task_state_lock, flags); }
#define PM8001_TASK_TIMEOUT 20 @@ -748,13 +752,10 @@ static int pm8001_exec_internal_tmf_task(struct domain_device *dev, } res = -TMF_RESP_FUNC_FAILED; /* Even TMF timed out, return direct. */ - if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { - if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { - pm8001_dbg(pm8001_ha, FAIL, - "TMF task[%x]timeout.\n", - tmf->tmf); - goto ex_err; - } + if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { + pm8001_dbg(pm8001_ha, FAIL, "TMF task[%x]timeout.\n", + tmf->tmf); + goto ex_err; }
if (task->task_status.resp == SAS_TASK_COMPLETE && @@ -834,12 +835,9 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha, wait_for_completion(&task->slow_task->completion); res = TMF_RESP_FUNC_FAILED; /* Even TMF timed out, return direct. */ - if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { - if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { - pm8001_dbg(pm8001_ha, FAIL, - "TMF task timeout.\n"); - goto ex_err; - } + if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { + pm8001_dbg(pm8001_ha, FAIL, "TMF task timeout.\n"); + goto ex_err; }
if (task->task_status.resp == SAS_TASK_COMPLETE &&
From: Harshvardhan Jha harshvardhan.jha@oracle.com
[ Upstream commit 77541f78eadfe9fdb018a7b8b69f0f2af2cf4b82 ]
The list_for_each_entry() iterator, "adapter" in this code, can never be NULL. If we exit the loop without finding the correct adapter then "adapter" points invalid memory that is an offset from the list head. This will eventually lead to memory corruption and presumably a kernel crash.
Link: https://lore.kernel.org/r/20210708074642.23599-1-harshvardhan.jha@oracle.com Acked-by: Sumit Saxena sumit.saxena@broadcom.com Signed-off-by: Harshvardhan Jha harshvardhan.jha@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/megaraid/megaraid_mm.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c index abf7b401f5b9..c509440bd161 100644 --- a/drivers/scsi/megaraid/megaraid_mm.c +++ b/drivers/scsi/megaraid/megaraid_mm.c @@ -238,7 +238,7 @@ mraid_mm_get_adapter(mimd_t __user *umimd, int *rval) mimd_t mimd; uint32_t adapno; int iterator; - + bool is_found;
if (copy_from_user(&mimd, umimd, sizeof(mimd_t))) { *rval = -EFAULT; @@ -254,12 +254,16 @@ mraid_mm_get_adapter(mimd_t __user *umimd, int *rval)
adapter = NULL; iterator = 0; + is_found = false;
list_for_each_entry(adapter, &adapters_list_g, list) { - if (iterator++ == adapno) break; + if (iterator++ == adapno) { + is_found = true; + break; + } }
- if (!adapter) { + if (!is_found) { *rval = -ENODEV; return NULL; } @@ -725,6 +729,7 @@ ioctl_done(uioc_t *kioc) uint32_t adapno; int iterator; mraid_mmadp_t* adapter; + bool is_found;
/* * When the kioc returns from driver, make sure it still doesn't @@ -747,19 +752,23 @@ ioctl_done(uioc_t *kioc) iterator = 0; adapter = NULL; adapno = kioc->adapno; + is_found = false;
con_log(CL_ANN, ( KERN_WARNING "megaraid cmm: completed " "ioctl that was timedout before\n"));
list_for_each_entry(adapter, &adapters_list_g, list) { - if (iterator++ == adapno) break; + if (iterator++ == adapno) { + is_found = true; + break; + } }
kioc->timedout = 0;
- if (adapter) { + if (is_found) mraid_mm_dealloc_kioc( adapter, kioc ); - } + } else { wake_up(&wait_q);
From: Ye Bin yebin10@huawei.com
[ Upstream commit bc546c0c9abb3bb2fb46866b3d1e6ade9695a5f6 ]
The following BUG_ON() was observed during RDAC scan:
[595952.944297] kernel BUG at drivers/scsi/device_handler/scsi_dh_rdac.c:427! [595952.951143] Internal error: Oops - BUG: 0 [#1] SMP ...... [595953.251065] Call trace: [595953.259054] check_ownership+0xb0/0x118 [595953.269794] rdac_bus_attach+0x1f0/0x4b0 [595953.273787] scsi_dh_handler_attach+0x3c/0xe8 [595953.278211] scsi_dh_add_device+0xc4/0xe8 [595953.282291] scsi_sysfs_add_sdev+0x8c/0x2a8 [595953.286544] scsi_probe_and_add_lun+0x9fc/0xd00 [595953.291142] __scsi_scan_target+0x598/0x630 [595953.295395] scsi_scan_target+0x120/0x130 [595953.299481] fc_user_scan+0x1a0/0x1c0 [scsi_transport_fc] [595953.304944] store_scan+0xb0/0x108 [595953.308420] dev_attr_store+0x44/0x60 [595953.312160] sysfs_kf_write+0x58/0x80 [595953.315893] kernfs_fop_write+0xe8/0x1f0 [595953.319888] __vfs_write+0x60/0x190 [595953.323448] vfs_write+0xac/0x1c0 [595953.326836] ksys_write+0x74/0xf0 [595953.330221] __arm64_sys_write+0x24/0x30
Code is in check_ownership:
list_for_each_entry_rcu(tmp, &h->ctlr->dh_list, node) { /* h->sdev should always be valid */ BUG_ON(!tmp->sdev); tmp->sdev->access_state = access_state; }
rdac_bus_attach initialize_controller list_add_rcu(&h->node, &h->ctlr->dh_list); h->sdev = sdev;
rdac_bus_detach list_del_rcu(&h->node); h->sdev = NULL;
Fix the race between rdac_bus_attach() and rdac_bus_detach() where h->sdev is NULL when processing the RDAC attach.
Link: https://lore.kernel.org/r/20210113063103.2698953-1-yebin10@huawei.com Reviewed-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Ye Bin yebin10@huawei.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/device_handler/scsi_dh_rdac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 25f6e1ac9e7b..66652ab409cc 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -453,8 +453,8 @@ static int initialize_controller(struct scsi_device *sdev, if (!h->ctlr) err = SCSI_DH_RES_TEMP_UNAVAIL; else { - list_add_rcu(&h->node, &h->ctlr->dh_list); h->sdev = sdev; + list_add_rcu(&h->node, &h->ctlr->dh_list); } spin_unlock(&list_lock); err = SCSI_DH_OK; @@ -778,11 +778,11 @@ static void rdac_bus_detach( struct scsi_device *sdev ) spin_lock(&list_lock); if (h->ctlr) { list_del_rcu(&h->node); - h->sdev = NULL; kref_put(&h->ctlr->kref, release_controller); } spin_unlock(&list_lock); sdev->handler_data = NULL; + synchronize_rcu(); kfree(h); }
From: Sreekanth Reddy sreekanth.reddy@broadcom.com
[ Upstream commit 70edd2e6f652f67d854981fd67f9ad0f1deaea92 ]
Avoid printing a 'target allocation failed' error if the driver target_alloc() callback function returns -ENXIO. This return value indicates that the corresponding H:C:T:L entry is empty.
Removing this error reduces the scan time if the user issues SCAN_WILD_CARD scan operation through sysfs parameter on a host with a lot of empty H:C:T:L entries.
Avoiding the printk on -ENXIO matches the behavior of the other callback functions during scanning.
Link: https://lore.kernel.org/r/20210726115402.1936-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy sreekanth.reddy@broadcom.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/scsi_scan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 12f54571b83e..f0367115632b 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -471,7 +471,8 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, error = shost->hostt->target_alloc(starget);
if(error) { - dev_printk(KERN_ERR, dev, "target allocation failed, error %d\n", error); + if (error != -ENXIO) + dev_err(dev, "target allocation failed, error %d\n", error); /* don't want scsi_target_reap to do the final * put because it will be under the host lock */ scsi_target_destroy(starget);
From: lijinlin lijinlin3@huawei.com
[ Upstream commit f0f82e2476f6adb9c7a0135cfab8091456990c99 ]
After adding physical volumes to a volume group through vgextend, the kernel will rescan the partitions. This in turn will cause the device capacity to be queried.
If the device status is set to offline through sysfs at this time, READ CAPACITY command will return a result which the host byte is DID_NO_CONNECT, and the capacity of the device will be set to zero in read_capacity_error(). After setting device status back to running, the capacity of the device will remain stuck at zero.
Fix this issue by rescanning device when the device state changes to SDEV_RUNNING.
Link: https://lore.kernel.org/r/20210727034455.1494960-1-lijinlin3@huawei.com Reviewed-by: Bart Van Assche bvanassche@acm.org Signed-off-by: lijinlin lijinlin3@huawei.com Signed-off-by: Wu Bo wubo40@huawei.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/scsi_sysfs.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 32489d25158f..ae9bfc658203 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -807,11 +807,14 @@ store_state_field(struct device *dev, struct device_attribute *attr, mutex_lock(&sdev->state_mutex); ret = scsi_device_set_state(sdev, state); /* - * If the device state changes to SDEV_RUNNING, we need to run - * the queue to avoid I/O hang. + * If the device state changes to SDEV_RUNNING, we need to + * rescan the device to revalidate it, and run the queue to + * avoid I/O hang. */ - if (ret == 0 && state == SDEV_RUNNING) + if (ret == 0 && state == SDEV_RUNNING) { + scsi_rescan_device(dev); blk_mq_run_hw_queues(sdev->request_queue, true); + } mutex_unlock(&sdev->state_mutex);
return ret == 0 ? count : -EINVAL;
From: Yifan Zhang yifan1.zhang@amd.com
[ Upstream commit 1c0539a6fc8a4a4b77278e35d763073890de96b9 ]
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
Signed-off-by: Yifan Zhang yifan1.zhang@amd.com Reviewed-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index 516467e962b7..3a476b86485e 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -1293,6 +1293,16 @@ static bool is_raven_kicker(struct amdgpu_device *adev) return false; }
+static bool check_if_enlarge_doorbell_range(struct amdgpu_device *adev) +{ + if ((adev->asic_type == CHIP_RENOIR) && + (adev->gfx.me_fw_version >= 0x000000a5) && + (adev->gfx.me_feature_version >= 52)) + return true; + else + return false; +} + static void gfx_v9_0_check_if_need_gfxoff(struct amdgpu_device *adev) { if (gfx_v9_0_should_disable_gfxoff(adev->pdev)) @@ -3673,7 +3683,16 @@ static int gfx_v9_0_kiq_init_register(struct amdgpu_ring *ring) if (ring->use_doorbell) { WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_LOWER, (adev->doorbell_index.kiq * 2) << 2); - WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_UPPER, + /* If GC has entered CGPG, ringing doorbell > first page + * doesn't wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to + * workaround this issue. And this change has to align with firmware + * update. + */ + if (check_if_enlarge_doorbell_range(adev)) + WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_UPPER, + (adev->doorbell.size - 4)); + else + WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_UPPER, (adev->doorbell_index.userqueue_end * 2) << 2); }
From: Prabhakar Kushwaha pkushwaha@marvell.com
[ Upstream commit 1159e25c137422bdc48ee96e3fb014bd942092c6 ]
A crash has been observed if rmmod is done while automatic debug collection in progress. It is due to a race condition between both of them.
To fix stop the sp_task during unload to avoid running qede_sp_task even if they are schedule during removal process.
Signed-off-by: Alok Prasad palok@marvell.com Signed-off-by: Shai Malin smalin@marvell.com Signed-off-by: Ariel Elior aelior@marvell.com Signed-off-by: Prabhakar Kushwaha pkushwaha@marvell.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qede/qede.h | 1 + drivers/net/ethernet/qlogic/qede/qede_main.c | 8 ++++++++ 2 files changed, 9 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h index 2e62a2c4eb63..5630008f38b7 100644 --- a/drivers/net/ethernet/qlogic/qede/qede.h +++ b/drivers/net/ethernet/qlogic/qede/qede.h @@ -501,6 +501,7 @@ struct qede_fastpath { #define QEDE_SP_HW_ERR 4 #define QEDE_SP_ARFS_CONFIG 5 #define QEDE_SP_AER 7 +#define QEDE_SP_DISABLE 8
#ifdef CONFIG_RFS_ACCEL int qede_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb, diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 01ac1e93d27a..7c6064baeba2 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -1009,6 +1009,13 @@ static void qede_sp_task(struct work_struct *work) struct qede_dev *edev = container_of(work, struct qede_dev, sp_task.work);
+ /* Disable execution of this deferred work once + * qede removal is in progress, this stop any future + * scheduling of sp_task. + */ + if (test_bit(QEDE_SP_DISABLE, &edev->sp_flags)) + return; + /* The locking scheme depends on the specific flag: * In case of QEDE_SP_RECOVERY, acquiring the RTNL lock is required to * ensure that ongoing flows are ended and new ones are not started. @@ -1300,6 +1307,7 @@ static void __qede_remove(struct pci_dev *pdev, enum qede_remove_mode mode) qede_rdma_dev_remove(edev, (mode == QEDE_REMOVE_RECOVERY));
if (mode != QEDE_REMOVE_RECOVERY) { + set_bit(QEDE_SP_DISABLE, &edev->sp_flags); unregister_netdev(ndev);
cancel_delayed_work_sync(&edev->sp_task);
From: Sudeep Holla sudeep.holla@arm.com
[ Upstream commit 47091f473b364c98207c4def197a0ae386fc9af1 ]
Once the new schema interrupt-controller/arm,vic.yaml is added, we get the below warnings:
arch/arm/boot/dts/ste-nomadik-nhk15.dt.yaml: intc@10140000: $nodename:0: 'intc@10140000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
Fix the node names for the interrupt controller to conform to the standard node name interrupt-controller@..
Signed-off-by: Sudeep Holla sudeep.holla@arm.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Cc: Linus Walleij linus.walleij@linaro.org Link: https://lore.kernel.org/r/20210617210825.3064367-2-sudeep.holla@arm.com Link: https://lore.kernel.org/r/20210626000103.830184-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index c9b906432341..1815361fe73c 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -755,14 +755,14 @@ clcd@10120000 { status = "disabled"; };
- vica: intc@10140000 { + vica: interrupt-controller@10140000 { compatible = "arm,versatile-vic"; interrupt-controller; #interrupt-cells = <1>; reg = <0x10140000 0x20>; };
- vicb: intc@10140020 { + vicb: interrupt-controller@10140020 { compatible = "arm,versatile-vic"; interrupt-controller; #interrupt-cells = <1>;
From: "Rafael J. Wysocki" rafael.j.wysocki@intel.com
[ Upstream commit 6511a8b5b7a65037340cd8ee91a377811effbc83 ]
Revert commit c27bac0314131 ("ACPICA: Fix memory leak caused by _CID repair function") which is reported to cause a boot issue on Acer Swift 3 (SF314-51).
Reported-by: Adrien Precigout dev@asdrip.fr Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/acpica/nsrepair2.c | 7 ------- 1 file changed, 7 deletions(-)
diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c index 38e10ab976e6..14b71b41e845 100644 --- a/drivers/acpi/acpica/nsrepair2.c +++ b/drivers/acpi/acpica/nsrepair2.c @@ -379,13 +379,6 @@ acpi_ns_repair_CID(struct acpi_evaluate_info *info,
(*element_ptr)->common.reference_count = original_ref_count; - - /* - * The original_element holds a reference from the package object - * that represents _HID. Since a new element was created by _HID, - * remove the reference from the _CID package. - */ - acpi_ut_remove_reference(original_element); }
element_ptr++;
From: Qiu Wenbo qiuwenbo@kylinos.com.cn
[ Upstream commit d09560435cb712c9ec1e62b8a43a79b0af69fe77 ]
The production version of HiFive Unmatched have 16GB memory.
Signed-off-by: Qiu Wenbo qiuwenbo@kylinos.com.cn Signed-off-by: Palmer Dabbelt palmerdabbelt@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts index b1c3c596578f..2e4ea84f27e7 100644 --- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts +++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts @@ -24,7 +24,7 @@ cpus {
memory@80000000 { device_type = "memory"; - reg = <0x0 0x80000000 0x2 0x00000000>; + reg = <0x0 0x80000000 0x4 0x00000000>; };
soc {
From: Petko Manolov petkan@nucleusys.com
[ Upstream commit 8a160e2e9aeb8318159b48701ad8a6e22274372d ]
Certain call sites of get_geristers() did not do proper error handling. This could be a problem as get_geristers() typically return the data via pointer to a buffer. If an error occurred the code is carelessly manipulating the wrong data.
Signed-off-by: Petko Manolov petkan@nucleusys.com Reviewed-by: Pavel Skripkin paskripkin@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/pegasus.c | 108 ++++++++++++++++++++++++++------------ 1 file changed, 75 insertions(+), 33 deletions(-)
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 9a907182569c..22353bab76c8 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -132,9 +132,15 @@ static int get_registers(pegasus_t *pegasus, __u16 indx, __u16 size, void *data) static int set_registers(pegasus_t *pegasus, __u16 indx, __u16 size, const void *data) { - return usb_control_msg_send(pegasus->usb, 0, PEGASUS_REQ_SET_REGS, + int ret; + + ret = usb_control_msg_send(pegasus->usb, 0, PEGASUS_REQ_SET_REGS, PEGASUS_REQT_WRITE, 0, indx, data, size, 1000, GFP_NOIO); + if (ret < 0) + netif_dbg(pegasus, drv, pegasus->net, "%s failed with %d\n", __func__, ret); + + return ret; }
/* @@ -145,10 +151,15 @@ static int set_registers(pegasus_t *pegasus, __u16 indx, __u16 size, static int set_register(pegasus_t *pegasus, __u16 indx, __u8 data) { void *buf = &data; + int ret;
- return usb_control_msg_send(pegasus->usb, 0, PEGASUS_REQ_SET_REG, + ret = usb_control_msg_send(pegasus->usb, 0, PEGASUS_REQ_SET_REG, PEGASUS_REQT_WRITE, data, indx, buf, 1, 1000, GFP_NOIO); + if (ret < 0) + netif_dbg(pegasus, drv, pegasus->net, "%s failed with %d\n", __func__, ret); + + return ret; }
static int update_eth_regs_async(pegasus_t *pegasus) @@ -188,10 +199,9 @@ static int update_eth_regs_async(pegasus_t *pegasus)
static int __mii_op(pegasus_t *p, __u8 phy, __u8 indx, __u16 *regd, __u8 cmd) { - int i; - __u8 data[4] = { phy, 0, 0, indx }; + int i, ret; __le16 regdi; - int ret = -ETIMEDOUT; + __u8 data[4] = { phy, 0, 0, indx };
if (cmd & PHY_WRITE) { __le16 *t = (__le16 *) & data[1]; @@ -207,12 +217,15 @@ static int __mii_op(pegasus_t *p, __u8 phy, __u8 indx, __u16 *regd, __u8 cmd) if (data[0] & PHY_DONE) break; } - if (i >= REG_TIMEOUT) + if (i >= REG_TIMEOUT) { + ret = -ETIMEDOUT; goto fail; + } if (cmd & PHY_READ) { ret = get_registers(p, PhyData, 2, ®di); + if (ret < 0) + goto fail; *regd = le16_to_cpu(regdi); - return ret; } return 0; fail: @@ -235,9 +248,13 @@ static int write_mii_word(pegasus_t *pegasus, __u8 phy, __u8 indx, __u16 *regd) static int mdio_read(struct net_device *dev, int phy_id, int loc) { pegasus_t *pegasus = netdev_priv(dev); + int ret; u16 res;
- read_mii_word(pegasus, phy_id, loc, &res); + ret = read_mii_word(pegasus, phy_id, loc, &res); + if (ret < 0) + return ret; + return (int)res; }
@@ -251,10 +268,9 @@ static void mdio_write(struct net_device *dev, int phy_id, int loc, int val)
static int read_eprom_word(pegasus_t *pegasus, __u8 index, __u16 *retdata) { - int i; - __u8 tmp = 0; + int ret, i; __le16 retdatai; - int ret; + __u8 tmp = 0;
set_register(pegasus, EpromCtrl, 0); set_register(pegasus, EpromOffset, index); @@ -262,21 +278,25 @@ static int read_eprom_word(pegasus_t *pegasus, __u8 index, __u16 *retdata)
for (i = 0; i < REG_TIMEOUT; i++) { ret = get_registers(pegasus, EpromCtrl, 1, &tmp); + if (ret < 0) + goto fail; if (tmp & EPROM_DONE) break; - if (ret == -ESHUTDOWN) - goto fail; } - if (i >= REG_TIMEOUT) + if (i >= REG_TIMEOUT) { + ret = -ETIMEDOUT; goto fail; + }
ret = get_registers(pegasus, EpromData, 2, &retdatai); + if (ret < 0) + goto fail; *retdata = le16_to_cpu(retdatai); return ret;
fail: - netif_warn(pegasus, drv, pegasus->net, "%s failed\n", __func__); - return -ETIMEDOUT; + netif_dbg(pegasus, drv, pegasus->net, "%s failed\n", __func__); + return ret; }
#ifdef PEGASUS_WRITE_EEPROM @@ -324,10 +344,10 @@ static int write_eprom_word(pegasus_t *pegasus, __u8 index, __u16 data) return ret;
fail: - netif_warn(pegasus, drv, pegasus->net, "%s failed\n", __func__); + netif_dbg(pegasus, drv, pegasus->net, "%s failed\n", __func__); return -ETIMEDOUT; } -#endif /* PEGASUS_WRITE_EEPROM */ +#endif /* PEGASUS_WRITE_EEPROM */
static inline int get_node_id(pegasus_t *pegasus, u8 *id) { @@ -367,19 +387,21 @@ static void set_ethernet_addr(pegasus_t *pegasus) return; err: eth_hw_addr_random(pegasus->net); - dev_info(&pegasus->intf->dev, "software assigned MAC address.\n"); + netif_dbg(pegasus, drv, pegasus->net, "software assigned MAC address.\n");
return; }
static inline int reset_mac(pegasus_t *pegasus) { + int ret, i; __u8 data = 0x8; - int i;
set_register(pegasus, EthCtrl1, data); for (i = 0; i < REG_TIMEOUT; i++) { - get_registers(pegasus, EthCtrl1, 1, &data); + ret = get_registers(pegasus, EthCtrl1, 1, &data); + if (ret < 0) + goto fail; if (~data & 0x08) { if (loopback) break; @@ -402,22 +424,29 @@ static inline int reset_mac(pegasus_t *pegasus) } if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_ELCON) { __u16 auxmode; - read_mii_word(pegasus, 3, 0x1b, &auxmode); + ret = read_mii_word(pegasus, 3, 0x1b, &auxmode); + if (ret < 0) + goto fail; auxmode |= 4; write_mii_word(pegasus, 3, 0x1b, &auxmode); }
return 0; +fail: + netif_dbg(pegasus, drv, pegasus->net, "%s failed\n", __func__); + return ret; }
static int enable_net_traffic(struct net_device *dev, struct usb_device *usb) { - __u16 linkpart; - __u8 data[4]; pegasus_t *pegasus = netdev_priv(dev); int ret; + __u16 linkpart; + __u8 data[4];
- read_mii_word(pegasus, pegasus->phy, MII_LPA, &linkpart); + ret = read_mii_word(pegasus, pegasus->phy, MII_LPA, &linkpart); + if (ret < 0) + goto fail; data[0] = 0xc8; /* TX & RX enable, append status, no CRC */ data[1] = 0; if (linkpart & (ADVERTISE_100FULL | ADVERTISE_10FULL)) @@ -435,11 +464,16 @@ static int enable_net_traffic(struct net_device *dev, struct usb_device *usb) usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS2 || usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) { u16 auxmode; - read_mii_word(pegasus, 0, 0x1b, &auxmode); + ret = read_mii_word(pegasus, 0, 0x1b, &auxmode); + if (ret < 0) + goto fail; auxmode |= 4; write_mii_word(pegasus, 0, 0x1b, &auxmode); }
+ return 0; +fail: + netif_dbg(pegasus, drv, pegasus->net, "%s failed\n", __func__); return ret; }
@@ -447,9 +481,9 @@ static void read_bulk_callback(struct urb *urb) { pegasus_t *pegasus = urb->context; struct net_device *net; + u8 *buf = urb->transfer_buffer; int rx_status, count = urb->actual_length; int status = urb->status; - u8 *buf = urb->transfer_buffer; __u16 pkt_len;
if (!pegasus) @@ -998,8 +1032,7 @@ static int pegasus_ioctl(struct net_device *net, struct ifreq *rq, int cmd) data[0] = pegasus->phy; fallthrough; case SIOCDEVPRIVATE + 1: - read_mii_word(pegasus, data[0], data[1] & 0x1f, &data[3]); - res = 0; + res = read_mii_word(pegasus, data[0], data[1] & 0x1f, &data[3]); break; case SIOCDEVPRIVATE + 2: if (!capable(CAP_NET_ADMIN)) @@ -1033,22 +1066,25 @@ static void pegasus_set_multicast(struct net_device *net)
static __u8 mii_phy_probe(pegasus_t *pegasus) { - int i; + int i, ret; __u16 tmp;
for (i = 0; i < 32; i++) { - read_mii_word(pegasus, i, MII_BMSR, &tmp); + ret = read_mii_word(pegasus, i, MII_BMSR, &tmp); + if (ret < 0) + goto fail; if (tmp == 0 || tmp == 0xffff || (tmp & BMSR_MEDIA) == 0) continue; else return i; } - +fail: return 0xff; }
static inline void setup_pegasus_II(pegasus_t *pegasus) { + int ret; __u8 data = 0xa5;
set_register(pegasus, Reg1d, 0); @@ -1060,7 +1096,9 @@ static inline void setup_pegasus_II(pegasus_t *pegasus) set_register(pegasus, Reg7b, 2);
set_register(pegasus, 0x83, data); - get_registers(pegasus, 0x83, 1, &data); + ret = get_registers(pegasus, 0x83, 1, &data); + if (ret < 0) + goto fail;
if (data == 0xa5) pegasus->chip = 0x8513; @@ -1075,6 +1113,10 @@ static inline void setup_pegasus_II(pegasus_t *pegasus) set_register(pegasus, Reg81, 6); else set_register(pegasus, Reg81, 2); + + return; +fail: + netif_dbg(pegasus, drv, pegasus->net, "%s failed\n", __func__); }
static void check_carrier(struct work_struct *work)
From: "Ivan T. Ivanov" iivanov@suse.de
[ Upstream commit 6b67d4d63edece1033972214704c04f36c5be89a ]
Currently phy_device state could be left in inconsistent state shown by following alert message[1]. This is because phy_read_status could be called concurrently from lan78xx_delayedwork, phy_state_machine and __ethtool_get_link. Fix this by making sure that phy_device state is updated atomically.
[1] lan78xx 1-1.1.1:1.0 eth0: No phy led trigger registered for speed(-1)
Signed-off-by: Ivan T. Ivanov iivanov@suse.de Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/lan78xx.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 02bce40a67e5..c46a66ea32eb 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -1154,7 +1154,7 @@ static int lan78xx_link_reset(struct lan78xx_net *dev) { struct phy_device *phydev = dev->net->phydev; struct ethtool_link_ksettings ecmd; - int ladv, radv, ret; + int ladv, radv, ret, link; u32 buf;
/* clear LAN78xx interrupt status */ @@ -1162,9 +1162,12 @@ static int lan78xx_link_reset(struct lan78xx_net *dev) if (unlikely(ret < 0)) return -EIO;
+ mutex_lock(&phydev->lock); phy_read_status(phydev); + link = phydev->link; + mutex_unlock(&phydev->lock);
- if (!phydev->link && dev->link_on) { + if (!link && dev->link_on) { dev->link_on = false;
/* reset MAC */ @@ -1177,7 +1180,7 @@ static int lan78xx_link_reset(struct lan78xx_net *dev) return -EIO;
del_timer(&dev->stat_monitor); - } else if (phydev->link && !dev->link_on) { + } else if (link && !dev->link_on) { dev->link_on = true;
phy_ethtool_ksettings_get(phydev, &ecmd); @@ -1466,9 +1469,14 @@ static int lan78xx_set_eee(struct net_device *net, struct ethtool_eee *edata)
static u32 lan78xx_get_link(struct net_device *net) { + u32 link; + + mutex_lock(&net->phydev->lock); phy_read_status(net->phydev); + link = net->phydev->link; + mutex_unlock(&net->phydev->lock);
- return net->phydev->link; + return link; }
static void lan78xx_get_drvinfo(struct net_device *net,
From: Peter Zijlstra peterz@infradead.org
[ Upstream commit f4b4b45652578357031fbbef7f7a1b04f6fa2dc3 ]
On Wed, Jul 28, 2021 at 12:49:43PM -0400, Vince Weaver wrote:
[32694.087403] unchecked MSR access error: WRMSR to 0x318 (tried to write 0x0000000000000000) at rIP: 0xffffffff8106f854 (native_write_msr+0x4/0x20) [32694.101374] Call Trace: [32694.103974] perf_clear_dirty_counters+0x86/0x100
The problem being that it doesn't filter out all fake counters, in specific the above (erroneously) tries to use FIXED_BTS. Limit the fixed counters indexes to the hardware supplied number.
Reported-by: Vince Weaver vincent.weaver@maine.edu Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Tested-by: Vince Weaver vincent.weaver@maine.edu Tested-by: Like Xu likexu@tencent.com Link: https://lkml.kernel.org/r/YQJxka3dxgdIdebG@hirez.programming.kicks-ass.net Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/events/core.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c index 1eb45139fcc6..3092fbf9dbe4 100644 --- a/arch/x86/events/core.c +++ b/arch/x86/events/core.c @@ -2489,13 +2489,15 @@ void perf_clear_dirty_counters(void) return;
for_each_set_bit(i, cpuc->dirty, X86_PMC_IDX_MAX) { - /* Metrics and fake events don't have corresponding HW counters. */ - if (is_metric_idx(i) || (i == INTEL_PMC_IDX_FIXED_VLBR)) - continue; - else if (i >= INTEL_PMC_IDX_FIXED) + if (i >= INTEL_PMC_IDX_FIXED) { + /* Metrics and fake events don't have corresponding HW counters. */ + if ((i - INTEL_PMC_IDX_FIXED) >= hybrid(cpuc->pmu, num_counters_fixed)) + continue; + wrmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + (i - INTEL_PMC_IDX_FIXED), 0); - else + } else { wrmsrl(x86_pmu_event_addr(i), 0); + } }
bitmap_zero(cpuc->dirty, X86_PMC_IDX_MAX);
From: Apurva Nandan a-nandan@ti.com
[ Upstream commit 0395be967b067d99494113d78470574e86a02ed4 ]
buswidth and dtr fields in spi_mem_op are only valid when the corresponding spi_mem_op phase has a non-zero length. For example, SPI NAND core doesn't set buswidth when using SPI_MEM_OP_NO_ADDR phase.
Fix the dtr checks in set_protocol() and suppports_mem_op() to ignore empty spi_mem_op phases, as checking for dtr field in empty phase will result in false negatives.
Signed-off-by: Apurva Nandan a-nandan@ti.com Link: https://lore.kernel.org/r/20210716232504.182-3-a-nandan@ti.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-cadence-quadspi.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index d62d69dd72b9..73d4f0a1558d 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -325,7 +325,15 @@ static int cqspi_set_protocol(struct cqspi_flash_pdata *f_pdata, f_pdata->inst_width = CQSPI_INST_TYPE_SINGLE; f_pdata->addr_width = CQSPI_INST_TYPE_SINGLE; f_pdata->data_width = CQSPI_INST_TYPE_SINGLE; - f_pdata->dtr = op->data.dtr && op->cmd.dtr && op->addr.dtr; + + /* + * For an op to be DTR, cmd phase along with every other non-empty + * phase should have dtr field set to 1. If an op phase has zero + * nbytes, ignore its dtr field; otherwise, check its dtr field. + */ + f_pdata->dtr = op->cmd.dtr && + (!op->addr.nbytes || op->addr.dtr) && + (!op->data.nbytes || op->data.dtr);
switch (op->data.buswidth) { case 0: @@ -1227,8 +1235,15 @@ static bool cqspi_supports_mem_op(struct spi_mem *mem, { bool all_true, all_false;
- all_true = op->cmd.dtr && op->addr.dtr && op->dummy.dtr && - op->data.dtr; + /* + * op->dummy.dtr is required for converting nbytes into ncycles. + * Also, don't check the dtr field of the op phase having zero nbytes. + */ + all_true = op->cmd.dtr && + (!op->addr.nbytes || op->addr.dtr) && + (!op->dummy.nbytes || op->dummy.dtr) && + (!op->data.nbytes || op->data.dtr); + all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr && !op->data.dtr;
From: Bing Guo bing.guo@amd.com
[ Upstream commit 06050a0f01dbac2ca33145ef19a72041206ea983 ]
Why: In DCN2x, HW doesn't automatically divide MASTER_UPDATE_LOCK_DB_X by the number of pipes ODM Combined.
How: Set MASTER_UPDATE_LOCK_DB_X to the value that is adjusted by the number of pipes ODM Combined.
Reviewed-by: Martin Leung martin.leung@amd.com Acked-by: Aurabindo Pillai aurabindo.pillai@amd.com Signed-off-by: Bing Guo bing.guo@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c index 3139d90017ee..23f830986f78 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c @@ -464,7 +464,7 @@ void optc2_lock_doublebuffer_enable(struct timing_generator *optc)
REG_UPDATE_2(OTG_GLOBAL_CONTROL1, MASTER_UPDATE_LOCK_DB_X, - h_blank_start - 200 - 1, + (h_blank_start - 200 - 1) / optc1->opp_count, MASTER_UPDATE_LOCK_DB_Y, v_blank_start - 1); }
From: Qingqing Zhuo qingqing.zhuo@amd.com
[ Upstream commit c4152b297d56d3696ad0a9003169bc5b98ad7b72 ]
[Why] HPD disable and enable sequences are not mutually exclusive on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s), part of the disable sequence (specifically, a request to SMU to lower refclk) could come right before the call to PHY enable, causing DMUB to access an unresponsive PHY and thus a hard hang on the system.
[How] Disable 48mhz refclk off on native DP.
Reviewed-by: Hersen Wu hersenxs.wu@amd.com Acked-by: Aurabindo Pillai aurabindo.pillai@amd.com Signed-off-by: Qingqing Zhuo qingqing.zhuo@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c index 75ba86f951f8..7bbedb6b4a9e 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c @@ -66,9 +66,11 @@ int rn_get_active_display_cnt_wa( for (i = 0; i < context->stream_count; i++) { const struct dc_stream_state *stream = context->streams[i];
+ /* Extend the WA to DP for Linux*/ if (stream->signal == SIGNAL_TYPE_HDMI_TYPE_A || stream->signal == SIGNAL_TYPE_DVI_SINGLE_LINK || - stream->signal == SIGNAL_TYPE_DVI_DUAL_LINK) + stream->signal == SIGNAL_TYPE_DVI_DUAL_LINK || + stream->signal == SIGNAL_TYPE_DISPLAY_PORT) tmds_present = true; }
From: Vincent Fu vincent.fu@samsung.com
[ Upstream commit fb7b9b0231ba8f77587c23f5257a4fdb6df1219e ]
The kyber ioscheduler calls trace_block_rq_insert() *after* the request is added to the queue but the documentation for trace_block_rq_insert() says that the call should be made *before* the request is added to the queue. Move the tracepoint for the kyber ioscheduler so that it is consistent with the documentation.
Signed-off-by: Vincent Fu vincent.fu@samsung.com Link: https://lore.kernel.org/r/20210804194913.10497-1-vincent.fu@samsung.com Reviewed by: Adam Manzanares a.manzanares@samsung.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/kyber-iosched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/block/kyber-iosched.c b/block/kyber-iosched.c index 81e3279ecd57..15a8be57203d 100644 --- a/block/kyber-iosched.c +++ b/block/kyber-iosched.c @@ -596,13 +596,13 @@ static void kyber_insert_requests(struct blk_mq_hw_ctx *hctx, struct list_head *head = &kcq->rq_list[sched_domain];
spin_lock(&kcq->lock); + trace_block_rq_insert(rq); if (at_head) list_move(&rq->queuelist, head); else list_move_tail(&rq->queuelist, head); sbitmap_set_bit(&khd->kcq_map[sched_domain], rq->mq_ctx->index_hw[hctx->type]); - trace_block_rq_insert(rq); spin_unlock(&kcq->lock); } }
linux-stable-mirror@lists.linaro.org
-
Sasha Levin