[PATCH AUTOSEL 4.9 01/35] net: pch_gbe: Use proper accessors to BE data in pch_ptp_match()
From: Andy Shevchenko andriy.shevchenko@linux.intel.com
[ Upstream commit 443ef39b499cc9c6635f83238101f1bb923e9326 ]
Sparse is not happy about handling of strict types in pch_ptp_match():
.../pch_gbe_main.c:158:33: warning: incorrect type in argument 2 (different base types) .../pch_gbe_main.c:158:33: expected unsigned short [usertype] uid_hi .../pch_gbe_main.c:158:33: got restricted __be16 [usertype] .../pch_gbe_main.c:158:45: warning: incorrect type in argument 3 (different base types) .../pch_gbe_main.c:158:45: expected unsigned int [usertype] uid_lo .../pch_gbe_main.c:158:45: got restricted __be32 [usertype] .../pch_gbe_main.c:158:56: warning: incorrect type in argument 4 (different base types) .../pch_gbe_main.c:158:56: expected unsigned short [usertype] seqid .../pch_gbe_main.c:158:56: got restricted __be16 [usertype]
Fix that by switching to use proper accessors to BE data.
Reported-by: kernel test robot lkp@intel.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Tested-by: Flavio Suligoi f.suligoi@asem.it Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 3cd87a41ac92..13ca1ae89b0d 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -124,7 +124,7 @@ static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid) { u8 *data = skb->data; unsigned int offset; - u16 *hi, *id; + u16 hi, id; u32 lo;
if (ptp_classify_raw(skb) == PTP_CLASS_NONE) @@ -135,14 +135,11 @@ static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid) if (skb->len < offset + OFF_PTP_SEQUENCE_ID + sizeof(seqid)) return 0;
- hi = (u16 *)(data + offset + OFF_PTP_SOURCE_UUID); - id = (u16 *)(data + offset + OFF_PTP_SEQUENCE_ID); + hi = get_unaligned_be16(data + offset + OFF_PTP_SOURCE_UUID + 0); + lo = get_unaligned_be32(data + offset + OFF_PTP_SOURCE_UUID + 2); + id = get_unaligned_be16(data + offset + OFF_PTP_SEQUENCE_ID);
- memcpy(&lo, &hi[1], sizeof(lo)); - - return (uid_hi == *hi && - uid_lo == lo && - seqid == *id); + return (uid_hi == hi && uid_lo == lo && seqid == id); }
static void @@ -152,7 +149,6 @@ pch_rx_timestamp(struct pch_gbe_adapter *adapter, struct sk_buff *skb) struct pci_dev *pdev; u64 ns; u32 hi, lo, val; - u16 uid, seq;
if (!adapter->hwts_rx_en) return; @@ -168,10 +164,7 @@ pch_rx_timestamp(struct pch_gbe_adapter *adapter, struct sk_buff *skb) lo = pch_src_uuid_lo_read(pdev); hi = pch_src_uuid_hi_read(pdev);
- uid = hi & 0xffff; - seq = (hi >> 16) & 0xffff; - - if (!pch_ptp_match(skb, htons(uid), htonl(lo), htons(seq))) + if (!pch_ptp_match(skb, hi, lo, hi >> 16)) goto out;
ns = pch_rx_snap_read(pdev);
From: Bibo Mao maobibo@loongson.cn
[ Upstream commit 33ae8f801ad8bec48e886d368739feb2816478f2 ]
If multiple threads are accessing the same huge page at the same time, hugetlb_cow will be called if one thread write the COW huge page. And function huge_ptep_clear_flush is called to notify other threads to clear the huge pte tlb entry. The other threads clear the huge pte tlb entry and reload it from page table, the reload huge pte entry may be old.
This patch fixes this issue on mips platform, and it clears huge pte entry before notifying other threads to flush current huge page entry, it is similar with other architectures.
Signed-off-by: Bibo Mao maobibo@loongson.cn Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/include/asm/hugetlb.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/mips/include/asm/hugetlb.h b/arch/mips/include/asm/hugetlb.h index 982bc0685330..4747a4694669 100644 --- a/arch/mips/include/asm/hugetlb.h +++ b/arch/mips/include/asm/hugetlb.h @@ -67,7 +67,13 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) { - flush_tlb_page(vma, addr & huge_page_mask(hstate_vma(vma))); + /* + * clear the huge pte entry firstly, so that the other smp threads will + * not get old pte entry after finishing flush_tlb_page and before + * setting new huge pte entry + */ + huge_ptep_get_and_clear(vma->vm_mm, addr, ptep); + flush_tlb_page(vma, addr); }
static inline int huge_pte_none(pte_t pte)
From: Zou Wei zou_wei@huawei.com
[ Upstream commit 1c72e6ab66b9598cac741ed397438a52065a8f1f ]
This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.
Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Zou Wei zou_wei@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/iphase.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index fe47c924dc64..a1427cb9b9ed 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -3301,7 +3301,7 @@ static void __exit ia_module_exit(void) { pci_unregister_driver(&ia_driver);
- del_timer(&ia_timer); + del_timer_sync(&ia_timer); }
module_init(ia_module_init);
From: Zou Wei zou_wei@huawei.com
[ Upstream commit 009fc857c5f6fda81f2f7dd851b2d54193a8e733 ]
This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.
Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Zou Wei zou_wei@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/isdn/hardware/mISDN/hfcpci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c index ff48da61c94c..89cf1d695a01 100644 --- a/drivers/isdn/hardware/mISDN/hfcpci.c +++ b/drivers/isdn/hardware/mISDN/hfcpci.c @@ -2352,7 +2352,7 @@ static void __exit HFC_cleanup(void) { if (timer_pending(&hfc_tl)) - del_timer(&hfc_tl); + del_timer_sync(&hfc_tl);
pci_unregister_driver(&hfc_driver); }
From: Zou Wei zou_wei@huawei.com
[ Upstream commit 34e7434ba4e97f4b85c1423a59b2922ba7dff2ea ]
This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.
Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Zou Wei zou_wei@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/nicstar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c index 8bcd09fb0feb..b2bae94ffe4d 100644 --- a/drivers/atm/nicstar.c +++ b/drivers/atm/nicstar.c @@ -298,7 +298,7 @@ static void __exit nicstar_cleanup(void) { XPRINTK("nicstar: nicstar_cleanup() called.\n");
- del_timer(&ns_timer); + del_timer_sync(&ns_timer);
pci_unregister_driver(&nicstar_driver);
From: Sebastian Andrzej Siewior bigeasy@linutronix.de
[ Upstream commit 8380c81d5c4fced6f4397795a5ae65758272bbfd ]
__napi_schedule_irqoff() is an optimized version of __napi_schedule() which can be used where it is known that interrupts are disabled, e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer callbacks.
On PREEMPT_RT enabled kernels this assumptions is not true. Force- threaded interrupt handlers and spinlocks are not disabling interrupts and the NAPI hrtimer callback is forced into softirq context which runs with interrupts enabled as well.
Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole game so make __napi_schedule_irqoff() invoke __napi_schedule() for PREEMPT_RT kernels.
The callers of ____napi_schedule() in the networking core have been audited and are correct on PREEMPT_RT kernels as well.
Reported-by: Juri Lelli juri.lelli@redhat.com Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Reviewed-by: Thomas Gleixner tglx@linutronix.de Reviewed-by: Juri Lelli juri.lelli@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/dev.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/net/core/dev.c b/net/core/dev.c index 5b69a9a41dd5..47468fc5d0c9 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4998,11 +4998,18 @@ EXPORT_SYMBOL(__napi_schedule); * __napi_schedule_irqoff - schedule for receive * @n: entry to schedule * - * Variant of __napi_schedule() assuming hard irqs are masked + * Variant of __napi_schedule() assuming hard irqs are masked. + * + * On PREEMPT_RT enabled kernels this maps to __napi_schedule() + * because the interrupt disabled assumption might not be true + * due to force-threaded interrupts and spinlock substitution. */ void __napi_schedule_irqoff(struct napi_struct *n) { - ____napi_schedule(this_cpu_ptr(&softnet_data), n); + if (!IS_ENABLED(CONFIG_PREEMPT_RT)) + ____napi_schedule(this_cpu_ptr(&softnet_data), n); + else + __napi_schedule(n); } EXPORT_SYMBOL(__napi_schedule_irqoff);
From: Pavel Skripkin paskripkin@gmail.com
[ Upstream commit a149127be52fa7eaf5b3681a0317a2bbb772d5a9 ]
syzbot reported divide error in reiserfs. The problem was in incorrect journal 1st block.
Syzbot's reproducer manualy generated wrong superblock with incorrect 1st block. In journal_init() wasn't any checks about this particular case.
For example, if 1st journal block is before superblock 1st block, it can cause zeroing important superblock members in do_journal_end().
Link: https://lore.kernel.org/r/20210517121545.29645-1-paskripkin@gmail.com Reported-by: syzbot+0ba9909df31c6a36974d@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin paskripkin@gmail.com Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/reiserfs/journal.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index 2a5c4813c47d..94871f611fa8 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -2766,6 +2766,20 @@ int journal_init(struct super_block *sb, const char *j_dev_name, goto free_and_return; }
+ /* + * Sanity check to see if journal first block is correct. + * If journal first block is invalid it can cause + * zeroing important superblock members. + */ + if (!SB_ONDISK_JOURNAL_DEVICE(sb) && + SB_ONDISK_JOURNAL_1st_BLOCK(sb) < SB_JOURNAL_1st_RESERVED_BLOCK(sb)) { + reiserfs_warning(sb, "journal-1393", + "journal 1st super block is invalid: 1st reserved block %d, but actual 1st block is %d", + SB_JOURNAL_1st_RESERVED_BLOCK(sb), + SB_ONDISK_JOURNAL_1st_BLOCK(sb)); + goto free_and_return; + } + if (journal_init_dev(sb, journal, j_dev_name) != 0) { reiserfs_warning(sb, "sh-462", "unable to initialize journal device");
From: Xie Yongji xieyongji@bytedance.com
[ Upstream commit 17f46f488a5d82c5568e6e786cd760bba1c2ee09 ]
The dev->dev_private might not be allocated if virtio_gpu_pci_quirk() or virtio_gpu_init() failed. In this case, we should avoid the cleanup in virtio_gpu_release().
Signed-off-by: Xie Yongji xieyongji@bytedance.com Link: http://patchwork.freedesktop.org/patch/msgid/20210517084913.403-1-xieyongji@... Signed-off-by: Gerd Hoffmann kraxel@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/virtio/virtgpu_kms.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/virtio/virtgpu_kms.c b/drivers/gpu/drm/virtio/virtgpu_kms.c index ba7855da7c7f..d8b2027730d0 100644 --- a/drivers/gpu/drm/virtio/virtgpu_kms.c +++ b/drivers/gpu/drm/virtio/virtgpu_kms.c @@ -258,6 +258,9 @@ int virtio_gpu_driver_unload(struct drm_device *dev) flush_work(&vgdev->config_changed_work); vgdev->vdev->config->del_vqs(vgdev->vdev);
+ if (!vgdev) + return; + virtio_gpu_modeset_fini(vgdev); virtio_gpu_ttm_fini(vgdev); virtio_gpu_free_vbufs(vgdev);
From: Xie Yongji xieyongji@bytedance.com
[ Upstream commit cec7f1774605a5ef47c134af62afe7c75c30b0ee ]
The virtio_gpu_init() will free vgdev and vgdev->vbufs on failure. But such failure will be caught by virtio_gpu_probe() and then virtio_gpu_release() will be called to do some cleanup which will free vgdev and vgdev->vbufs again. So let's set dev->dev_private to NULL to avoid double free.
Signed-off-by: Xie Yongji xieyongji@bytedance.com Link: http://patchwork.freedesktop.org/patch/msgid/20210517084913.403-2-xieyongji@... Signed-off-by: Gerd Hoffmann kraxel@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/virtio/virtgpu_kms.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/virtio/virtgpu_kms.c b/drivers/gpu/drm/virtio/virtgpu_kms.c index d8b2027730d0..cde38e14232c 100644 --- a/drivers/gpu/drm/virtio/virtgpu_kms.c +++ b/drivers/gpu/drm/virtio/virtgpu_kms.c @@ -234,6 +234,7 @@ int virtio_gpu_driver_load(struct drm_device *dev, unsigned long flags) err_vbufs: vgdev->vdev->config->del_vqs(vgdev->vdev); err_vqs: + dev->dev_private = NULL; kfree(vgdev); return ret; }
From: Arturo Giusti koredump@protonmail.com
[ Upstream commit fa236c2b2d4436d9f19ee4e5d5924e90ffd7bb43 ]
In function udf_symlink, epos.bh is assigned with the value returned by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c and returns the value of sb_getblk function that could be NULL. Then, epos.bh is used without any check, causing a possible NULL pointer dereference when sb_getblk fails.
This fix adds a check to validate the value of epos.bh.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213083 Signed-off-by: Arturo Giusti koredump@protonmail.com Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/udf/namei.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/fs/udf/namei.c b/fs/udf/namei.c index 348b922d1b6a..bfa53dead8c8 100644 --- a/fs/udf/namei.c +++ b/fs/udf/namei.c @@ -956,6 +956,10 @@ static int udf_symlink(struct inode *dir, struct dentry *dentry, iinfo->i_location.partitionReferenceNum, 0); epos.bh = udf_tgetblk(sb, block); + if (unlikely(!epos.bh)) { + err = -ENOMEM; + goto out_no_entry; + } lock_buffer(epos.bh); memset(epos.bh->b_data, 0x00, bsize); set_buffer_uptodate(epos.bh);
From: Jesse Brandeburg jesse.brandeburg@intel.com
[ Upstream commit d4ef55288aa2e1b76033717242728ac98ddc4721 ]
Sparse tool was warning on some implicit conversions from little endian data read from the EEPROM on the e100 cards.
Fix these by being explicit about the conversions using le16_to_cpu().
Signed-off-by: Jesse Brandeburg jesse.brandeburg@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/e100.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index 93c29094ceff..9035cb5fc70d 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -1423,7 +1423,7 @@ static int e100_phy_check_without_mii(struct nic *nic) u8 phy_type; int without_mii;
- phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f; + phy_type = (le16_to_cpu(nic->eeprom[eeprom_phy_iface]) >> 8) & 0x0f;
switch (phy_type) { case NoSuchPhy: /* Non-MII PHY; UNTESTED! */ @@ -1543,7 +1543,7 @@ static int e100_phy_init(struct nic *nic) mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr); } else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) && (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) && - (nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) { + (le16_to_cpu(nic->eeprom[eeprom_cnfg_mdix]) & eeprom_mdix_enabled))) { /* enable/disable MDI/MDI-X auto-switching. */ mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH); @@ -2298,9 +2298,9 @@ static int e100_asf(struct nic *nic) { /* ASF can be enabled from eeprom */ return (nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) && - (nic->eeprom[eeprom_config_asf] & eeprom_asf) && - !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) && - ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE); + (le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_asf) && + !(le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_gcl) && + ((le16_to_cpu(nic->eeprom[eeprom_smbus_addr]) & 0xFF) != 0xFE); }
static int e100_up(struct nic *nic) @@ -2952,7 +2952,7 @@ static int e100_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Wol magic packet can be enabled from eeprom */ if ((nic->mac >= mac_82558_D101_A4) && - (nic->eeprom[eeprom_id] & eeprom_id_wol)) { + (le16_to_cpu(nic->eeprom[eeprom_id]) & eeprom_id_wol)) { nic->flags |= wol_magic; device_set_wakeup_enable(&pdev->dev, true); }
From: Dmitry Osipenko digetx@gmail.com
[ Upstream commit a7196048cd5168096c2c4f44a3939d7a6dcd06b9 ]
The PLLU (USB) consists of the PLL configuration itself and configuration of the PLLU outputs. The PLLU programming is inconsistent on T30 vs T114, where T114 immediately bails out if PLLU is enabled and T30 re-enables a potentially already enabled PLL (left after bootloader) and then fully reprograms it, which could be unsafe to do. The correct way should be to skip enabling of the PLL if it's already enabled and then apply configuration to the outputs. This patch doesn't fix any known problems, it's a minor improvement.
Acked-by: Thierry Reding treding@nvidia.com Signed-off-by: Dmitry Osipenko digetx@gmail.com Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/tegra/clk-pll.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c index 1ab36a355daf..789efad791a3 100644 --- a/drivers/clk/tegra/clk-pll.c +++ b/drivers/clk/tegra/clk-pll.c @@ -1085,7 +1085,8 @@ static int clk_pllu_enable(struct clk_hw *hw) if (pll->lock) spin_lock_irqsave(pll->lock, flags);
- _clk_pll_enable(hw); + if (!clk_pll_is_enabled(hw)) + _clk_pll_enable(hw);
ret = clk_pll_wait_for_lock(pll); if (ret < 0) @@ -1702,7 +1703,8 @@ static int clk_pllu_tegra114_enable(struct clk_hw *hw) if (pll->lock) spin_lock_irqsave(pll->lock, flags);
- _clk_pll_enable(hw); + if (!clk_pll_is_enabled(hw)) + _clk_pll_enable(hw);
ret = clk_pll_wait_for_lock(pll); if (ret < 0)
From: Willy Tarreau w@1wt.eu
[ Upstream commit 62f20e068ccc50d6ab66fdb72ba90da2b9418c99 ]
This is a complement to commit aa6dd211e4b1 ("inet: use bigger hash table for IP ID generation"), but focusing on some specific aspects of IPv6.
Contary to IPv4, IPv6 only uses packet IDs with fragments, and with a minimum MTU of 1280, it's much less easy to force a remote peer to produce many fragments to explore its ID sequence. In addition packet IDs are 32-bit in IPv6, which further complicates their analysis. On the other hand, it is often easier to choose among plenty of possible source addresses and partially work around the bigger hash table the commit above permits, which leaves IPv6 partially exposed to some possibilities of remote analysis at the risk of weakening some protocols like DNS if some IDs can be predicted with a good enough probability.
Given the wide range of permitted IDs, the risk of collision is extremely low so there's no need to rely on the positive increment algorithm that is shared with the IPv4 code via ip_idents_reserve(). We have a fast PRNG, so let's simply call prandom_u32() and be done with it.
Performance measurements at 10 Gbps couldn't show any difference with the previous code, even when using a single core, because due to the large fragments, we're limited to only ~930 kpps at 10 Gbps and the cost of the random generation is completely offset by other operations and by the network transfer time. In addition, this change removes the need to update a shared entry in the idents table so it may even end up being slightly faster on large scale systems where this matters.
The risk of at least one collision here is about 1/80 million among 10 IDs, 1/850k among 100 IDs, and still only 1/8.5k among 1000 IDs, which remains very low compared to IPv4 where all IDs are reused every 4 to 80ms on a 10 Gbps flow depending on packet sizes.
Reported-by: Amit Klein aksecurity@gmail.com Signed-off-by: Willy Tarreau w@1wt.eu Reviewed-by: Eric Dumazet edumazet@google.com Link: https://lore.kernel.org/r/20210529110746.6796-1-w@1wt.eu Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/output_core.c | 28 +++++----------------------- 1 file changed, 5 insertions(+), 23 deletions(-)
diff --git a/net/ipv6/output_core.c b/net/ipv6/output_core.c index 6a6d01cb1ace..9c25e8b09306 100644 --- a/net/ipv6/output_core.c +++ b/net/ipv6/output_core.c @@ -14,29 +14,11 @@ static u32 __ipv6_select_ident(struct net *net, const struct in6_addr *dst, const struct in6_addr *src) { - const struct { - struct in6_addr dst; - struct in6_addr src; - } __aligned(SIPHASH_ALIGNMENT) combined = { - .dst = *dst, - .src = *src, - }; - u32 hash, id; - - /* Note the following code is not safe, but this is okay. */ - if (unlikely(siphash_key_is_zero(&net->ipv4.ip_id_key))) - get_random_bytes(&net->ipv4.ip_id_key, - sizeof(net->ipv4.ip_id_key)); - - hash = siphash(&combined, sizeof(combined), &net->ipv4.ip_id_key); - - /* Treat id of 0 as unset and if we get 0 back from ip_idents_reserve, - * set the hight order instead thus minimizing possible future - * collisions. - */ - id = ip_idents_reserve(hash, 1); - if (unlikely(!id)) - id = 1 << 31; + u32 id; + + do { + id = prandom_u32(); + } while (!id);
return id; }
From: Jiapeng Chong jiapeng.chong@linux.alibaba.com
[ Upstream commit aeb27bb76ad8197eb47890b1ff470d5faf8ec9a5 ]
The error code is missing in this code scenario so 0 will be returned. Add the error code '-EINVAL' to the return value 'ret'.
Eliminates the follow smatch warning:
drivers/infiniband/hw/cxgb4/qp.c:298 create_qp() warn: missing error code 'ret'.
Link: https://lore.kernel.org/r/1622545669-20625-1-git-send-email-jiapeng.chong@li... Reported-by: Abaci Robot abaci@linux.alibaba.com Signed-off-by: Jiapeng Chong jiapeng.chong@linux.alibaba.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/cxgb4/qp.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 36bdb04f8f01..87bc7b0db892 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -277,6 +277,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq, if (user && (!wq->sq.bar2_pa || !wq->rq.bar2_pa)) { pr_warn(MOD "%s: sqid %u or rqid %u not in BAR2 range.\n", pci_name(rdev->lldi.pdev), wq->sq.qid, wq->rq.qid); + ret = -EINVAL; goto free_dma; }
From: Joe Thornber ejt@redhat.com
[ Upstream commit 5faafc77f7de69147d1e818026b9a0cbf036a7b2 ]
Current commit code resets the place where the search for free blocks will begin back to the start of the metadata device. There are a couple of repercussions to this:
- The first allocation after the commit is likely to take longer than normal as it searches for a free block in an area that is likely to have very few free blocks (if any).
- Any free blocks it finds will have been recently freed. Reusing them means we have fewer old copies of the metadata to aid recovery from hardware error.
Fix these issues by leaving the cursor alone, only resetting when the search hits the end of the metadata device.
Signed-off-by: Joe Thornber ejt@redhat.com Signed-off-by: Mike Snitzer snitzer@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/persistent-data/dm-space-map-disk.c | 9 ++++++++- drivers/md/persistent-data/dm-space-map-metadata.c | 9 ++++++++- 2 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/md/persistent-data/dm-space-map-disk.c b/drivers/md/persistent-data/dm-space-map-disk.c index bf4c5e2ccb6f..e0acae7a3815 100644 --- a/drivers/md/persistent-data/dm-space-map-disk.c +++ b/drivers/md/persistent-data/dm-space-map-disk.c @@ -171,6 +171,14 @@ static int sm_disk_new_block(struct dm_space_map *sm, dm_block_t *b) * Any block we allocate has to be free in both the old and current ll. */ r = sm_ll_find_common_free_block(&smd->old_ll, &smd->ll, smd->begin, smd->ll.nr_blocks, b); + if (r == -ENOSPC) { + /* + * There's no free block between smd->begin and the end of the metadata device. + * We search before smd->begin in case something has been freed. + */ + r = sm_ll_find_common_free_block(&smd->old_ll, &smd->ll, 0, smd->begin, b); + } + if (r) return r;
@@ -199,7 +207,6 @@ static int sm_disk_commit(struct dm_space_map *sm) return r;
memcpy(&smd->old_ll, &smd->ll, sizeof(smd->old_ll)); - smd->begin = 0; smd->nr_allocated_this_transaction = 0;
r = sm_disk_get_nr_free(sm, &nr_free); diff --git a/drivers/md/persistent-data/dm-space-map-metadata.c b/drivers/md/persistent-data/dm-space-map-metadata.c index 967d8f2a731f..62a4d7da9bd9 100644 --- a/drivers/md/persistent-data/dm-space-map-metadata.c +++ b/drivers/md/persistent-data/dm-space-map-metadata.c @@ -451,6 +451,14 @@ static int sm_metadata_new_block_(struct dm_space_map *sm, dm_block_t *b) * Any block we allocate has to be free in both the old and current ll. */ r = sm_ll_find_common_free_block(&smm->old_ll, &smm->ll, smm->begin, smm->ll.nr_blocks, b); + if (r == -ENOSPC) { + /* + * There's no free block between smm->begin and the end of the metadata device. + * We search before smm->begin in case something has been freed. + */ + r = sm_ll_find_common_free_block(&smm->old_ll, &smm->ll, 0, smm->begin, b); + } + if (r) return r;
@@ -502,7 +510,6 @@ static int sm_metadata_commit(struct dm_space_map *sm) return r;
memcpy(&smm->old_ll, &smm->ll, sizeof(smm->old_ll)); - smm->begin = 0; smm->allocated_this_transaction = 0;
return 0;
From: Yang Yingliang yangyingliang@huawei.com
[ Upstream commit 20f1932e2282c58cb5ac59517585206cf5b385ae ]
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.
Signed-off-by: Yang Yingliang yangyingliang@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/micrel/ks8842.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/micrel/ks8842.c b/drivers/net/ethernet/micrel/ks8842.c index cb0102dd7f70..d691c33dffc6 100644 --- a/drivers/net/ethernet/micrel/ks8842.c +++ b/drivers/net/ethernet/micrel/ks8842.c @@ -1150,6 +1150,10 @@ static int ks8842_probe(struct platform_device *pdev) unsigned i;
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iomem) { + dev_err(&pdev->dev, "Invalid resource\n"); + return -EINVAL; + } if (!request_mem_region(iomem->start, resource_size(iomem), DRV_NAME)) goto err_mem_region;
From: Yang Yingliang yangyingliang@huawei.com
[ Upstream commit 35cba15a504bf4f585bb9d78f47b22b28a1a06b2 ]
Use devm_platform_get_and_ioremap_resource() to simplify code and avoid a null-ptr-deref by checking 'res' in it.
Signed-off-by: Yang Yingliang yangyingliang@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/moxa/moxart_ether.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c index 6fe61d9343cb..9673fbe16774 100644 --- a/drivers/net/ethernet/moxa/moxart_ether.c +++ b/drivers/net/ethernet/moxa/moxart_ether.c @@ -487,14 +487,13 @@ static int moxart_mac_probe(struct platform_device *pdev) priv = netdev_priv(ndev); priv->ndev = ndev;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ndev->base_addr = res->start; - priv->base = devm_ioremap_resource(p_dev, res); + priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); if (IS_ERR(priv->base)) { dev_err(p_dev, "devm_ioremap_resource failed\n"); ret = PTR_ERR(priv->base); goto init_fail; } + ndev->base_addr = res->start;
spin_lock_init(&priv->txlock);
From: Yang Yingliang yangyingliang@huawei.com
[ Upstream commit f18c11812c949553d2b2481ecaa274dd51bed1e7 ]
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.
Signed-off-by: Yang Yingliang yangyingliang@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/fjes/fjes_main.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/net/fjes/fjes_main.c b/drivers/net/fjes/fjes_main.c index 3511d40ba3f1..440047a239f5 100644 --- a/drivers/net/fjes/fjes_main.c +++ b/drivers/net/fjes/fjes_main.c @@ -1212,6 +1212,10 @@ static int fjes_probe(struct platform_device *plat_dev) adapter->interrupt_watch_enable = false;
res = platform_get_resource(plat_dev, IORESOURCE_MEM, 0); + if (!res) { + err = -EINVAL; + goto err_free_control_wq; + } hw->hw_res.start = res->start; hw->hw_res.size = resource_size(res); hw->hw_res.irq = platform_get_irq(plat_dev, 0);
From: Minchan Kim minchan@kernel.org
[ Upstream commit 648f2c6100cfa18e7dfe43bc0b9c3b73560d623c ]
In the field, we have seen lots of allocation failure from the call path below.
06-03 13:29:12.999 1010315 31557 31557 W Binder : 31542_2: page allocation failure: order:0, mode:0x800(GFP_NOWAIT), nodemask=(null),cpuset=background,mems_allowed=0 ... ... 06-03 13:29:12.999 1010315 31557 31557 W Call trace: 06-03 13:29:12.999 1010315 31557 31557 W : dump_backtrace.cfi_jt+0x0/0x8 06-03 13:29:12.999 1010315 31557 31557 W : dump_stack+0xc8/0x14c 06-03 13:29:12.999 1010315 31557 31557 W : warn_alloc+0x158/0x1c8 06-03 13:29:12.999 1010315 31557 31557 W : __alloc_pages_slowpath+0x9d8/0xb80 06-03 13:29:12.999 1010315 31557 31557 W : __alloc_pages_nodemask+0x1c4/0x430 06-03 13:29:12.999 1010315 31557 31557 W : allocate_slab+0xb4/0x390 06-03 13:29:12.999 1010315 31557 31557 W : ___slab_alloc+0x12c/0x3a4 06-03 13:29:12.999 1010315 31557 31557 W : kmem_cache_alloc+0x358/0x5e4 06-03 13:29:12.999 1010315 31557 31557 W : avc_alloc_node+0x30/0x184 06-03 13:29:12.999 1010315 31557 31557 W : avc_update_node+0x54/0x4f0 06-03 13:29:12.999 1010315 31557 31557 W : avc_has_extended_perms+0x1a4/0x460 06-03 13:29:12.999 1010315 31557 31557 W : selinux_file_ioctl+0x320/0x3d0 06-03 13:29:12.999 1010315 31557 31557 W : __arm64_sys_ioctl+0xec/0x1fc 06-03 13:29:12.999 1010315 31557 31557 W : el0_svc_common+0xc0/0x24c 06-03 13:29:12.999 1010315 31557 31557 W : el0_svc+0x28/0x88 06-03 13:29:12.999 1010315 31557 31557 W : el0_sync_handler+0x8c/0xf0 06-03 13:29:12.999 1010315 31557 31557 W : el0_sync+0x1a4/0x1c0 .. .. 06-03 13:29:12.999 1010315 31557 31557 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010315 31557 31557 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010315 31557 31557 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:12.999 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:12.999 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:12.999 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 10230 30892 30892 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 10230 30892 30892 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 10230 30892 30892 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 10230 30892 30892 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 10230 30892 30892 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
Based on [1], selinux is tolerate for failure of memory allocation. Then, use __GFP_NOWARN together.
[1] 476accbe2f6e ("selinux: use GFP_NOWAIT in the AVC kmem_caches")
Signed-off-by: Minchan Kim minchan@kernel.org [PM: subj fix, line wraps, normalized commit refs] Signed-off-by: Paul Moore paul@paul-moore.com Signed-off-by: Sasha Levin sashal@kernel.org --- security/selinux/avc.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/security/selinux/avc.c b/security/selinux/avc.c index f3c473791b69..a16c72c2a967 100644 --- a/security/selinux/avc.c +++ b/security/selinux/avc.c @@ -348,26 +348,27 @@ static struct avc_xperms_decision_node struct avc_xperms_decision_node *xpd_node; struct extended_perms_decision *xpd;
- xpd_node = kmem_cache_zalloc(avc_xperms_decision_cachep, GFP_NOWAIT); + xpd_node = kmem_cache_zalloc(avc_xperms_decision_cachep, + GFP_NOWAIT | __GFP_NOWARN); if (!xpd_node) return NULL;
xpd = &xpd_node->xpd; if (which & XPERMS_ALLOWED) { xpd->allowed = kmem_cache_zalloc(avc_xperms_data_cachep, - GFP_NOWAIT); + GFP_NOWAIT | __GFP_NOWARN); if (!xpd->allowed) goto error; } if (which & XPERMS_AUDITALLOW) { xpd->auditallow = kmem_cache_zalloc(avc_xperms_data_cachep, - GFP_NOWAIT); + GFP_NOWAIT | __GFP_NOWARN); if (!xpd->auditallow) goto error; } if (which & XPERMS_DONTAUDIT) { xpd->dontaudit = kmem_cache_zalloc(avc_xperms_data_cachep, - GFP_NOWAIT); + GFP_NOWAIT | __GFP_NOWARN); if (!xpd->dontaudit) goto error; } @@ -395,7 +396,7 @@ static struct avc_xperms_node *avc_xperms_alloc(void) { struct avc_xperms_node *xp_node;
- xp_node = kmem_cache_zalloc(avc_xperms_cachep, GFP_NOWAIT); + xp_node = kmem_cache_zalloc(avc_xperms_cachep, GFP_NOWAIT | __GFP_NOWARN); if (!xp_node) return xp_node; INIT_LIST_HEAD(&xp_node->xpd_head); @@ -548,7 +549,7 @@ static struct avc_node *avc_alloc_node(void) { struct avc_node *node;
- node = kmem_cache_zalloc(avc_node_cachep, GFP_NOWAIT); + node = kmem_cache_zalloc(avc_node_cachep, GFP_NOWAIT | __GFP_NOWARN); if (!node) goto out;
From: Steffen Klassert steffen.klassert@secunet.com
[ Upstream commit 6fd06963fa74197103cdbb4b494763127b3f2f34 ]
When memory allocation for XFRMA_ENCAP or XFRMA_COADDR fails, the error will not be reported because the -ENOMEM assignment to the err variable is overwritten before. Fix this by moving these two in front of the function so that memory allocation failures will be reported.
Reported-by: Tobias Brunner tobias@strongswan.org Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/xfrm/xfrm_user.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index feb24ca530f2..48139e1a0ac9 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -566,6 +566,20 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
copy_from_user_state(x, p);
+ if (attrs[XFRMA_ENCAP]) { + x->encap = kmemdup(nla_data(attrs[XFRMA_ENCAP]), + sizeof(*x->encap), GFP_KERNEL); + if (x->encap == NULL) + goto error; + } + + if (attrs[XFRMA_COADDR]) { + x->coaddr = kmemdup(nla_data(attrs[XFRMA_COADDR]), + sizeof(*x->coaddr), GFP_KERNEL); + if (x->coaddr == NULL) + goto error; + } + if (attrs[XFRMA_SA_EXTRA_FLAGS]) x->props.extra_flags = nla_get_u32(attrs[XFRMA_SA_EXTRA_FLAGS]);
@@ -586,23 +600,9 @@ static struct xfrm_state *xfrm_state_construct(struct net *net, attrs[XFRMA_ALG_COMP]))) goto error;
- if (attrs[XFRMA_ENCAP]) { - x->encap = kmemdup(nla_data(attrs[XFRMA_ENCAP]), - sizeof(*x->encap), GFP_KERNEL); - if (x->encap == NULL) - goto error; - } - if (attrs[XFRMA_TFCPAD]) x->tfcpad = nla_get_u32(attrs[XFRMA_TFCPAD]);
- if (attrs[XFRMA_COADDR]) { - x->coaddr = kmemdup(nla_data(attrs[XFRMA_COADDR]), - sizeof(*x->coaddr), GFP_KERNEL); - if (x->coaddr == NULL) - goto error; - } - xfrm_mark_get(attrs, &x->mark);
err = __xfrm_init_state(x, false);
From: Tony Lindgren tony@atomide.com
[ Upstream commit 11ef6bc846dcdce838f0b00c5f6a562c57e5d43b ]
At least on wl12xx, reading the MAC after boot can fail with a warning at drivers/net/wireless/ti/wlcore/sdio.c:78 wl12xx_sdio_raw_read. The failed call comes from wl12xx_get_mac() that wlcore_nvs_cb() calls after request_firmware_work_func().
After the error, no wireless interface is created. Reloading the wl12xx module makes the interface work.
Turns out the wlan controller can be in a low-power ELP state after the boot from the bootloader or kexec, and needs to be woken up first.
Let's wake the hardware and add a sleep after that similar to wl12xx_pre_boot() is already doing.
Note that a similar issue could exist for wl18xx, but I have not seen it so far. And a search for wl18xx_get_mac and wl12xx_sdio_raw_read did not produce similar errors.
Cc: Carl Philipp Klemm philipp@uvos.xyz Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20210603062814.19464-1-tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ti/wl12xx/main.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 9bd635ec7827..72991d3a55f1 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1516,6 +1516,13 @@ static int wl12xx_get_fuse_mac(struct wl1271 *wl) u32 mac1, mac2; int ret;
+ /* Device may be in ELP from the bootloader or kexec */ + ret = wlcore_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); + if (ret < 0) + goto out; + + usleep_range(500000, 700000); + ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]); if (ret < 0) goto out;
From: Lee Gibson leegib@gmail.com
[ Upstream commit d10a87a3535cce2b890897914f5d0d83df669c63 ]
Function wl1251_cmd_scan calls memcpy without checking the length. Harden by checking the length is within the maximum allowed size.
Signed-off-by: Lee Gibson leegib@gmail.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20210428115508.25624-1-leegib@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ti/wl1251/cmd.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ti/wl1251/cmd.c b/drivers/net/wireless/ti/wl1251/cmd.c index ede31f048ef9..247f4310a38f 100644 --- a/drivers/net/wireless/ti/wl1251/cmd.c +++ b/drivers/net/wireless/ti/wl1251/cmd.c @@ -465,9 +465,12 @@ int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len, cmd->channels[i].channel = channels[i]->hw_value; }
- cmd->params.ssid_len = ssid_len; - if (ssid) - memcpy(cmd->params.ssid, ssid, ssid_len); + if (ssid) { + int len = clamp_val(ssid_len, 0, IEEE80211_MAX_SSID_LEN); + + cmd->params.ssid_len = len; + memcpy(cmd->params.ssid, ssid, len); + }
ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd)); if (ret < 0) {
From: Zou Wei zou_wei@huawei.com
[ Upstream commit dd778f89225cd258e8f0fed2b7256124982c8bb5 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.
Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Zou Wei zou_wei@huawei.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/1620788714-14300-1-git-send-email-zou_wei@huawei.c... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/st/cw1200/cw1200_sdio.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/st/cw1200/cw1200_sdio.c b/drivers/net/wireless/st/cw1200/cw1200_sdio.c index d3acc85932a5..de92107549ee 100644 --- a/drivers/net/wireless/st/cw1200/cw1200_sdio.c +++ b/drivers/net/wireless/st/cw1200/cw1200_sdio.c @@ -62,6 +62,7 @@ static const struct sdio_device_id cw1200_sdio_ids[] = { { SDIO_DEVICE(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200) }, { /* end: all zeroes */ }, }; +MODULE_DEVICE_TABLE(sdio, cw1200_sdio_ids);
/* hwbus_ops implemetation */
From: Huang Pei huangpei@loongson.cn
[ Upstream commit ed914d48b6a1040d1039d371b56273d422c0081e ]
This fixes Page Table accounting bug.
MIPS is the ONLY arch just defining __HAVE_ARCH_PMD_ALLOC_ONE alone. Since commit b2b29d6d011944 (mm: account PMD tables like PTE tables), "pmd_free" in asm-generic with PMD table accounting and "pmd_alloc_one" in MIPS without PMD table accounting causes PageTable accounting number negative, which read by global_zone_page_state(), always returns 0.
Signed-off-by: Huang Pei huangpei@loongson.cn Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/include/asm/pgalloc.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h index a03e86969f78..ff982d8b62f6 100644 --- a/arch/mips/include/asm/pgalloc.h +++ b/arch/mips/include/asm/pgalloc.h @@ -107,11 +107,15 @@ do { \
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) { - pmd_t *pmd; + pmd_t *pmd = NULL; + struct page *pg;
- pmd = (pmd_t *) __get_free_pages(GFP_KERNEL, PMD_ORDER); - if (pmd) + pg = alloc_pages(GFP_KERNEL | __GFP_ACCOUNT, PMD_ORDER); + if (pg) { + pgtable_pmd_page_ctor(pg); + pmd = (pmd_t *)page_address(pg); pmd_init((unsigned long)pmd, (unsigned long)invalid_pte_table); + } return pmd; }
From: Zheyu Ma zheyuma97@gmail.com
[ Upstream commit 6a1e5a4af17e440dd82a58a2c5f40ff17a82b722 ]
When 'nicstar_init_one' fails, 'ns_init_card_error' will be executed for error handling, but the correct memory free function should be used, otherwise it will cause an error. Since 'card->rsq.org' and 'card->tsq.org' are allocated using 'dma_alloc_coherent' function, they should be freed using 'dma_free_coherent'.
Fix this by using 'dma_free_coherent' instead of 'kfree'
This log reveals it:
[ 3.440294] kernel BUG at mm/slub.c:4206! [ 3.441059] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 3.441430] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #141 [ 3.441986] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.442780] RIP: 0010:kfree+0x26a/0x300 [ 3.443065] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0 [ 3.443396] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246 [ 3.443396] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000 [ 3.443396] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6 [ 3.443396] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001 [ 3.443396] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000 [ 3.443396] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160 [ 3.443396] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 3.443396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.443396] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0 [ 3.443396] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.443396] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.443396] Call Trace: [ 3.443396] ns_init_card_error+0x12c/0x220 [ 3.443396] nicstar_init_one+0x10d2/0x1130 [ 3.443396] local_pci_probe+0x4a/0xb0 [ 3.443396] pci_device_probe+0x126/0x1d0 [ 3.443396] ? pci_device_remove+0x100/0x100 [ 3.443396] really_probe+0x27e/0x650 [ 3.443396] driver_probe_device+0x84/0x1d0 [ 3.443396] ? mutex_lock_nested+0x16/0x20 [ 3.443396] device_driver_attach+0x63/0x70 [ 3.443396] __driver_attach+0x117/0x1a0 [ 3.443396] ? device_driver_attach+0x70/0x70 [ 3.443396] bus_for_each_dev+0xb6/0x110 [ 3.443396] ? rdinit_setup+0x40/0x40 [ 3.443396] driver_attach+0x22/0x30 [ 3.443396] bus_add_driver+0x1e6/0x2a0 [ 3.443396] driver_register+0xa4/0x180 [ 3.443396] __pci_register_driver+0x77/0x80 [ 3.443396] ? uPD98402_module_init+0xd/0xd [ 3.443396] nicstar_init+0x1f/0x75 [ 3.443396] do_one_initcall+0x7a/0x3d0 [ 3.443396] ? rdinit_setup+0x40/0x40 [ 3.443396] ? rcu_read_lock_sched_held+0x4a/0x70 [ 3.443396] kernel_init_freeable+0x2a7/0x2f9 [ 3.443396] ? rest_init+0x2c0/0x2c0 [ 3.443396] kernel_init+0x13/0x180 [ 3.443396] ? rest_init+0x2c0/0x2c0 [ 3.443396] ? rest_init+0x2c0/0x2c0 [ 3.443396] ret_from_fork+0x1f/0x30 [ 3.443396] Modules linked in: [ 3.443396] Dumping ftrace buffer: [ 3.443396] (ftrace buffer empty) [ 3.458593] ---[ end trace 3c6f8f0d8ef59bcd ]--- [ 3.458922] RIP: 0010:kfree+0x26a/0x300 [ 3.459198] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0 [ 3.460499] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246 [ 3.460870] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000 [ 3.461371] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6 [ 3.461873] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001 [ 3.462372] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000 [ 3.462871] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160 [ 3.463368] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 3.463949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.464356] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0 [ 3.464856] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.465356] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.465860] Kernel panic - not syncing: Fatal exception [ 3.466370] Dumping ftrace buffer: [ 3.466616] (ftrace buffer empty) [ 3.466871] Kernel Offset: disabled [ 3.467122] Rebooting in 1 seconds..
Signed-off-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/nicstar.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c index b2bae94ffe4d..7c9544ac1849 100644 --- a/drivers/atm/nicstar.c +++ b/drivers/atm/nicstar.c @@ -838,10 +838,12 @@ static void ns_init_card_error(ns_dev *card, int error) dev_kfree_skb_any(hb); } if (error >= 12) { - kfree(card->rsq.org); + dma_free_coherent(&card->pcidev->dev, NS_RSQSIZE + NS_RSQ_ALIGNMENT, + card->rsq.org, card->rsq.dma); } if (error >= 11) { - kfree(card->tsq.org); + dma_free_coherent(&card->pcidev->dev, NS_TSQSIZE + NS_TSQ_ALIGNMENT, + card->tsq.org, card->tsq.dma); } if (error >= 10) { free_irq(card->pcidev->irq, card);
From: Zheyu Ma zheyuma97@gmail.com
[ Upstream commit 70b639dc41ad499384e41e106fce72e36805c9f2 ]
Because the error handling is sequential, the application of resources should be carried out in the order of error handling, so the operation of registering the interrupt handler should be put in front, so as not to free the unregistered interrupt handler during error handling.
This log reveals it:
[ 3.438724] Trying to free already-free IRQ 23 [ 3.439060] WARNING: CPU: 5 PID: 1 at kernel/irq/manage.c:1825 free_irq+0xfb/0x480 [ 3.440039] Modules linked in: [ 3.440257] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142 [ 3.440793] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.441561] RIP: 0010:free_irq+0xfb/0x480 [ 3.441845] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80 [ 3.443121] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086 [ 3.443483] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000 [ 3.443972] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff [ 3.444462] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003 [ 3.444950] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8 [ 3.444994] FS: 0000000000000000(0000) GS:ffff88817bd40000(0000) knlGS:0000000000000000 [ 3.444994] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.444994] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0 [ 3.444994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.444994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.444994] Call Trace: [ 3.444994] ns_init_card_error+0x18e/0x250 [ 3.444994] nicstar_init_one+0x10d2/0x1130 [ 3.444994] local_pci_probe+0x4a/0xb0 [ 3.444994] pci_device_probe+0x126/0x1d0 [ 3.444994] ? pci_device_remove+0x100/0x100 [ 3.444994] really_probe+0x27e/0x650 [ 3.444994] driver_probe_device+0x84/0x1d0 [ 3.444994] ? mutex_lock_nested+0x16/0x20 [ 3.444994] device_driver_attach+0x63/0x70 [ 3.444994] __driver_attach+0x117/0x1a0 [ 3.444994] ? device_driver_attach+0x70/0x70 [ 3.444994] bus_for_each_dev+0xb6/0x110 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] driver_attach+0x22/0x30 [ 3.444994] bus_add_driver+0x1e6/0x2a0 [ 3.444994] driver_register+0xa4/0x180 [ 3.444994] __pci_register_driver+0x77/0x80 [ 3.444994] ? uPD98402_module_init+0xd/0xd [ 3.444994] nicstar_init+0x1f/0x75 [ 3.444994] do_one_initcall+0x7a/0x3d0 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] ? rcu_read_lock_sched_held+0x4a/0x70 [ 3.444994] kernel_init_freeable+0x2a7/0x2f9 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] kernel_init+0x13/0x180 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ret_from_fork+0x1f/0x30 [ 3.444994] Kernel panic - not syncing: panic_on_warn set ... [ 3.444994] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142 [ 3.444994] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.444994] Call Trace: [ 3.444994] dump_stack+0xba/0xf5 [ 3.444994] ? free_irq+0xfb/0x480 [ 3.444994] panic+0x155/0x3ed [ 3.444994] ? __warn+0xed/0x150 [ 3.444994] ? free_irq+0xfb/0x480 [ 3.444994] __warn+0x103/0x150 [ 3.444994] ? free_irq+0xfb/0x480 [ 3.444994] report_bug+0x119/0x1c0 [ 3.444994] handle_bug+0x3b/0x80 [ 3.444994] exc_invalid_op+0x18/0x70 [ 3.444994] asm_exc_invalid_op+0x12/0x20 [ 3.444994] RIP: 0010:free_irq+0xfb/0x480 [ 3.444994] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80 [ 3.444994] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086 [ 3.444994] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000 [ 3.444994] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff [ 3.444994] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003 [ 3.444994] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8 [ 3.444994] ? vprintk_func+0x71/0x110 [ 3.444994] ns_init_card_error+0x18e/0x250 [ 3.444994] nicstar_init_one+0x10d2/0x1130 [ 3.444994] local_pci_probe+0x4a/0xb0 [ 3.444994] pci_device_probe+0x126/0x1d0 [ 3.444994] ? pci_device_remove+0x100/0x100 [ 3.444994] really_probe+0x27e/0x650 [ 3.444994] driver_probe_device+0x84/0x1d0 [ 3.444994] ? mutex_lock_nested+0x16/0x20 [ 3.444994] device_driver_attach+0x63/0x70 [ 3.444994] __driver_attach+0x117/0x1a0 [ 3.444994] ? device_driver_attach+0x70/0x70 [ 3.444994] bus_for_each_dev+0xb6/0x110 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] driver_attach+0x22/0x30 [ 3.444994] bus_add_driver+0x1e6/0x2a0 [ 3.444994] driver_register+0xa4/0x180 [ 3.444994] __pci_register_driver+0x77/0x80 [ 3.444994] ? uPD98402_module_init+0xd/0xd [ 3.444994] nicstar_init+0x1f/0x75 [ 3.444994] do_one_initcall+0x7a/0x3d0 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] ? rcu_read_lock_sched_held+0x4a/0x70 [ 3.444994] kernel_init_freeable+0x2a7/0x2f9 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] kernel_init+0x13/0x180 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ret_from_fork+0x1f/0x30 [ 3.444994] Dumping ftrace buffer: [ 3.444994] (ftrace buffer empty) [ 3.444994] Kernel Offset: disabled [ 3.444994] Rebooting in 1 seconds..
Signed-off-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/nicstar.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c index 7c9544ac1849..8c675c4f6d54 100644 --- a/drivers/atm/nicstar.c +++ b/drivers/atm/nicstar.c @@ -526,6 +526,15 @@ static int ns_init_card(int i, struct pci_dev *pcidev) /* Set the VPI/VCI MSb mask to zero so we can receive OAM cells */ writel(0x00000000, card->membase + VPM);
+ card->intcnt = 0; + if (request_irq + (pcidev->irq, &ns_irq_handler, IRQF_SHARED, "nicstar", card) != 0) { + pr_err("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq); + error = 9; + ns_init_card_error(card, error); + return error; + } + /* Initialize TSQ */ card->tsq.org = dma_alloc_coherent(&card->pcidev->dev, NS_TSQSIZE + NS_TSQ_ALIGNMENT, @@ -752,15 +761,6 @@ static int ns_init_card(int i, struct pci_dev *pcidev)
card->efbie = 1;
- card->intcnt = 0; - if (request_irq - (pcidev->irq, &ns_irq_handler, IRQF_SHARED, "nicstar", card) != 0) { - printk("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq); - error = 9; - ns_init_card_error(card, error); - return error; - } - /* Register device */ card->atmdev = atm_dev_register("nicstar", &card->pcidev->dev, &atm_ops, -1, NULL);
From: Xiao Yang yangx.jy@fujitsu.com
[ Upstream commit 20ec0a6d6016aa28b9b3299be18baef1a0f91cd2 ]
rxe_mr_init_user() always returns the fixed -EINVAL when ib_umem_get() fails so it's hard for user to know which actual error happens in ib_umem_get(). For example, ib_umem_get() will return -EOPNOTSUPP when trying to pin pages on a DAX file.
Return actual error as mlx4/mlx5 does.
Link: https://lore.kernel.org/r/20210621071456.4259-1-ice_yangxiao@163.com Signed-off-by: Xiao Yang yangx.jy@fujitsu.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/sw/rxe/rxe_mr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_mr.c b/drivers/infiniband/sw/rxe/rxe_mr.c index 6d1ba75398a1..e23b322224ab 100644 --- a/drivers/infiniband/sw/rxe/rxe_mr.c +++ b/drivers/infiniband/sw/rxe/rxe_mr.c @@ -175,7 +175,7 @@ int rxe_mem_init_user(struct rxe_dev *rxe, struct rxe_pd *pd, u64 start, if (IS_ERR(umem)) { pr_warn("err %d from rxe_umem_get\n", (int)PTR_ERR(umem)); - err = -EINVAL; + err = PTR_ERR(umem); goto err1; }
From: Íñigo Huguet ihuguet@redhat.com
[ Upstream commit 45423cff1db66cf0993e8a9bd0ac93e740149e49 ]
If pci_remove was called for a PF with VFs, the removal of the VFs was called twice from efx_ef10_sriov_fini: one directly with pci_driver->remove and another implicit by calling pci_disable_sriov, which also perform the VFs remove. This was leading to crashing the kernel on the second attempt.
Given that pci_disable_sriov already calls to pci remove function, get rid of the direct call to pci_driver->remove from the driver.
2 different ways to trigger the bug: - Create one or more VFs, then attach the PF to a virtual machine (at least with qemu/KVM) - Create one or more VFs, then remove the PF with: echo 1 > /sys/bus/pci/devices/PF_PCI_ID/remove
Removing sfc module does not trigger the error, at least for me, because it removes the VF first, and then the PF.
Example of a log with the error: list_del corruption, ffff967fd20a8ad0->next is LIST_POISON1 (dead000000000100) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:47! [...trimmed...] RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x4c [...trimmed...] Call Trace: efx_dissociate+0x1f/0x140 [sfc] efx_pci_remove+0x27/0x150 [sfc] pci_device_remove+0x3b/0xc0 device_release_driver_internal+0x103/0x1f0 pci_stop_bus_device+0x69/0x90 pci_stop_and_remove_bus_device+0xe/0x20 pci_iov_remove_virtfn+0xba/0x120 sriov_disable+0x2f/0xe0 efx_ef10_pci_sriov_disable+0x52/0x80 [sfc] ? pcie_aer_is_native+0x12/0x40 efx_ef10_sriov_fini+0x72/0x110 [sfc] efx_pci_remove+0x62/0x150 [sfc] pci_device_remove+0x3b/0xc0 device_release_driver_internal+0x103/0x1f0 unbind_store+0xf6/0x130 kernfs_fop_write+0x116/0x190 vfs_write+0xa5/0x1a0 ksys_write+0x4f/0xb0 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca
Signed-off-by: Íñigo Huguet ihuguet@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sfc/ef10_sriov.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ef10_sriov.c b/drivers/net/ethernet/sfc/ef10_sriov.c index a949b9d27329..23aac3b37d6e 100644 --- a/drivers/net/ethernet/sfc/ef10_sriov.c +++ b/drivers/net/ethernet/sfc/ef10_sriov.c @@ -442,7 +442,6 @@ int efx_ef10_sriov_init(struct efx_nic *efx) void efx_ef10_sriov_fini(struct efx_nic *efx) { struct efx_ef10_nic_data *nic_data = efx->nic_data; - unsigned int i; int rc;
if (!nic_data->vf) { @@ -452,14 +451,7 @@ void efx_ef10_sriov_fini(struct efx_nic *efx) return; }
- /* Remove any VFs in the host */ - for (i = 0; i < efx->vf_count; ++i) { - struct efx_nic *vf_efx = nic_data->vf[i].efx; - - if (vf_efx) - vf_efx->pci_dev->driver->remove(vf_efx->pci_dev); - } - + /* Disable SRIOV and remove any VFs in the host */ rc = efx_ef10_pci_sriov_disable(efx, true); if (rc) netif_dbg(efx, drv, efx->net_dev,
From: Íñigo Huguet ihuguet@redhat.com
[ Upstream commit 1ebe4feb8b442884f5a28d2437040096723dd1ea ]
If SRIOV cannot be disabled during device removal or module unloading, return error code so it can be logged properly in the calling function.
Note that this can only happen if any VF is currently attached to a guest using Xen, but not with vfio/KVM. Despite that in that case the VFs won't work properly with PF removed and/or the module unloaded, I have let it as is because I don't know what side effects may have changing it, and also it seems to be the same that other drivers are doing in this situation.
In the case of being called during SRIOV reconfiguration, the behavior hasn't changed because the function is called with force=false.
Signed-off-by: Íñigo Huguet ihuguet@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sfc/ef10_sriov.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ef10_sriov.c b/drivers/net/ethernet/sfc/ef10_sriov.c index 23aac3b37d6e..bef23e19cbbd 100644 --- a/drivers/net/ethernet/sfc/ef10_sriov.c +++ b/drivers/net/ethernet/sfc/ef10_sriov.c @@ -405,12 +405,17 @@ static int efx_ef10_pci_sriov_enable(struct efx_nic *efx, int num_vfs) return rc; }
+/* Disable SRIOV and remove VFs + * If some VFs are attached to a guest (using Xen, only) nothing is + * done if force=false, and vports are freed if force=true (for the non + * attachedc ones, only) but SRIOV is not disabled and VFs are not + * removed in either case. + */ static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force) { struct pci_dev *dev = efx->pci_dev; - unsigned int vfs_assigned = 0; - - vfs_assigned = pci_vfs_assigned(dev); + unsigned int vfs_assigned = pci_vfs_assigned(dev); + int rc = 0;
if (vfs_assigned && !force) { netif_info(efx, drv, efx->net_dev, "VFs are assigned to guests; " @@ -420,10 +425,12 @@ static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
if (!vfs_assigned) pci_disable_sriov(dev); + else + rc = -EBUSY;
efx_ef10_sriov_free_vf_vswitching(efx); efx->vf_count = 0; - return 0; + return rc; }
int efx_ef10_sriov_configure(struct efx_nic *efx, int num_vfs)
From: "Gustavo A. R. Silva" gustavoars@kernel.org
[ Upstream commit e93bdd78406da9ed01554c51e38b2a02c8ef8025 ]
Fix the following out-of-bounds warning:
net/wireless/wext-spy.c:178:2: warning: 'memcpy' offset [25, 28] from the object at 'threshold' is out of the bounds of referenced subobject 'low' with type 'struct iw_quality' at offset 20 [-Warray-bounds]
The problem is that the original code is trying to copy data into a couple of struct members adjacent to each other in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &threshold.low and &spydata->spy_thr_low. As these are just a couple of struct members, fix this by using direct assignments, instead of memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy().
Link: https://github.com/KSPP/linux/issues/109 Reported-by: kernel test robot lkp@intel.com Signed-off-by: Gustavo A. R. Silva gustavoars@kernel.org Reviewed-by: Kees Cook keescook@chromium.org Link: https://lore.kernel.org/r/20210422200032.GA168995@embeddedor Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/wireless/wext-spy.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/net/wireless/wext-spy.c b/net/wireless/wext-spy.c index 33bef22e44e9..b379a0371653 100644 --- a/net/wireless/wext-spy.c +++ b/net/wireless/wext-spy.c @@ -120,8 +120,8 @@ int iw_handler_set_thrspy(struct net_device * dev, return -EOPNOTSUPP;
/* Just do it */ - memcpy(&(spydata->spy_thr_low), &(threshold->low), - 2 * sizeof(struct iw_quality)); + spydata->spy_thr_low = threshold->low; + spydata->spy_thr_high = threshold->high;
/* Clear flag */ memset(spydata->spy_thr_under, '\0', sizeof(spydata->spy_thr_under)); @@ -147,8 +147,8 @@ int iw_handler_get_thrspy(struct net_device * dev, return -EOPNOTSUPP;
/* Just do it */ - memcpy(&(threshold->low), &(spydata->spy_thr_low), - 2 * sizeof(struct iw_quality)); + threshold->low = spydata->spy_thr_low; + threshold->high = spydata->spy_thr_high;
return 0; } @@ -173,10 +173,10 @@ static void iw_send_thrspy_event(struct net_device * dev, memcpy(threshold.addr.sa_data, address, ETH_ALEN); threshold.addr.sa_family = ARPHRD_ETHER; /* Copy stats */ - memcpy(&(threshold.qual), wstats, sizeof(struct iw_quality)); + threshold.qual = *wstats; /* Copy also thresholds */ - memcpy(&(threshold.low), &(spydata->spy_thr_low), - 2 * sizeof(struct iw_quality)); + threshold.low = spydata->spy_thr_low; + threshold.high = spydata->spy_thr_high;
/* Send event to user space */ wireless_send_event(dev, SIOCGIWTHRSPY, &wrqu, (char *) &threshold);
From: Gerd Rausch gerd.rausch@oracle.com
[ Upstream commit 74f160ead74bfe5f2b38afb4fcf86189f9ff40c9 ]
Fix a memory leak when "mda_resolve_route() is called more than once on the same "rdma_cm_id".
This is possible if cma_query_handler() triggers the RDMA_CM_EVENT_ROUTE_ERROR flow which puts the state machine back and allows rdma_resolve_route() to be called again.
Link: https://lore.kernel.org/r/f6662b7b-bdb7-2706-1e12-47c61d3474b6@oracle.com Signed-off-by: Gerd Rausch gerd.rausch@oracle.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/core/cma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 0a6cc78ebcf7..149d210c68ab 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -2370,7 +2370,8 @@ static int cma_resolve_ib_route(struct rdma_id_private *id_priv, int timeout_ms) work->new_state = RDMA_CM_ROUTE_RESOLVED; work->event.event = RDMA_CM_EVENT_ROUTE_RESOLVED;
- route->path_rec = kmalloc(sizeof *route->path_rec, GFP_KERNEL); + if (!route->path_rec) + route->path_rec = kmalloc(sizeof *route->path_rec, GFP_KERNEL); if (!route->path_rec) { ret = -ENOMEM; goto err1;
From: Yu Liu yudiliu@google.com
[ Upstream commit 4ef36a52b0e47c80bbfd69c0cce61c7ae9f541ed ]
0x2B, 0x31 and 0x33 are reserved for future use but were not present in the HCI to MGMT conversion table, this caused the conversion to be incorrect for the HCI status code greater than 0x2A.
Reviewed-by: Miao-chen Chou mcchou@chromium.org Signed-off-by: Yu Liu yudiliu@google.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/mgmt.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index bca1408f815f..be634b97b857 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -219,12 +219,15 @@ static u8 mgmt_status_table[] = { MGMT_STATUS_TIMEOUT, /* Instant Passed */ MGMT_STATUS_NOT_SUPPORTED, /* Pairing Not Supported */ MGMT_STATUS_FAILED, /* Transaction Collision */ + MGMT_STATUS_FAILED, /* Reserved for future use */ MGMT_STATUS_INVALID_PARAMS, /* Unacceptable Parameter */ MGMT_STATUS_REJECTED, /* QoS Rejected */ MGMT_STATUS_NOT_SUPPORTED, /* Classification Not Supported */ MGMT_STATUS_REJECTED, /* Insufficient Security */ MGMT_STATUS_INVALID_PARAMS, /* Parameter Out Of Range */ + MGMT_STATUS_FAILED, /* Reserved for future use */ MGMT_STATUS_BUSY, /* Role Switch Pending */ + MGMT_STATUS_FAILED, /* Reserved for future use */ MGMT_STATUS_FAILED, /* Slot Violation */ MGMT_STATUS_FAILED, /* Role Switch Failed */ MGMT_STATUS_INVALID_PARAMS, /* EIR Too Large */
From: Kai-Heng Feng kai.heng.feng@canonical.com
[ Upstream commit 0ea9fd001a14ebc294f112b0361a4e601551d508 ]
Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it stops working: [ 509.691509] Bluetooth: hci0: HCI reset during shutdown failed [ 514.897584] Bluetooth: hci0: MSFT filter_enable is already on [ 530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd [ 545.660350] usb 3-10: device descriptor read/64, error -110 [ 561.283530] usb 3-10: device descriptor read/64, error -110 [ 561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd [ 566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500 [ 568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113) [ 578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110) [ 586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113) [ 596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110)
Or kernel panics because other workqueues already freed skb: [ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 2048.663775] #PF: supervisor read access in kernel mode [ 2048.663779] #PF: error_code(0x0000) - not-present page [ 2048.663782] PGD 0 P4D 0 [ 2048.663787] Oops: 0000 [#1] SMP NOPTI [ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G W 5.13.0-rc1-next-20210510+ #20 [ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020 [ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50 [ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1 07 83 f8 01 [ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286 [ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000 [ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000 [ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0 [ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000 [ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000 [ 2048.663843] FS: 00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000 [ 2048.663849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0 [ 2048.663856] PKRU: 55555554 [ 2048.663859] Call Trace: [ 2048.663865] ? skb_release_head_state+0x5e/0x80 [ 2048.663873] kfree_skb+0x2f/0xb0 [ 2048.663881] btusb_shutdown_intel_new+0x36/0x60 [btusb] [ 2048.663905] hci_dev_do_close+0x48c/0x5e0 [bluetooth] [ 2048.663954] ? __cond_resched+0x1a/0x50 [ 2048.663962] hci_rfkill_set_block+0x56/0xa0 [bluetooth] [ 2048.664007] rfkill_set_block+0x98/0x170 [ 2048.664016] rfkill_fop_write+0x136/0x1e0 [ 2048.664022] vfs_write+0xc7/0x260 [ 2048.664030] ksys_write+0xb1/0xe0 [ 2048.664035] ? exit_to_user_mode_prepare+0x37/0x1c0 [ 2048.664042] __x64_sys_write+0x1a/0x20 [ 2048.664048] do_syscall_64+0x40/0xb0 [ 2048.664055] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2048.664060] RIP: 0033:0x7fe02ac23c27 [ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27 [ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003 [ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440 [ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 [ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff
So move the shutdown callback to a place where workqueues are either flushed or cancelled to resolve the issue.
Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/hci_core.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 839c534bdcdb..50b9a0bbe5df 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1533,14 +1533,6 @@ int hci_dev_do_close(struct hci_dev *hdev)
BT_DBG("%s %p", hdev->name, hdev);
- if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && - test_bit(HCI_UP, &hdev->flags)) { - /* Execute vendor specific shutdown routine */ - if (hdev->shutdown) - hdev->shutdown(hdev); - } - cancel_delayed_work(&hdev->power_off);
hci_request_cancel_all(hdev); @@ -1608,6 +1600,14 @@ int hci_dev_do_close(struct hci_dev *hdev) clear_bit(HCI_INIT, &hdev->flags); }
+ if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && + !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && + test_bit(HCI_UP, &hdev->flags)) { + /* Execute vendor specific shutdown routine */ + if (hdev->shutdown) + hdev->shutdown(hdev); + } + /* flush cmd work */ flush_work(&hdev->cmd_work);
From: Tim Jiang tjiang@codeaurora.org
[ Upstream commit 4f00bfb372674d586c4a261bfc595cbce101fbb6 ]
This is btsoc timing issue, after host start to downloading bt firmware, ep2 need time to switch from function acl to function dfu, so host add 20ms delay as workaround.
Signed-off-by: Tim Jiang tjiang@codeaurora.org Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bluetooth/btusb.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 4e3b24a0511f..30c09b9ddbf0 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -2508,6 +2508,11 @@ static int btusb_setup_qca_download_fw(struct hci_dev *hdev, sent += size; count -= size;
+ /* ep2 need time to switch from function acl to function dfu, + * so we add 20ms delay here. + */ + msleep(20); + while (count) { size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
From: Marcelo Ricardo Leitner marcelo.leitner@gmail.com
[ Upstream commit 50619dbf8db77e98d821d615af4f634d08e22698 ]
The first chunk in a packet is ensured to be present at the beginning of sctp_rcv(), as a packet needs to have at least 1 chunk. But the second one, may not be completely available and ch->length can be over uninitialized memory.
Fix here is by only trying to walk on the next chunk if there is enough to hold at least the header, and then proceed with the ch->length validation that is already there.
Reported-by: Ilja Van Sprundel ivansprundel@ioactive.com Signed-off-by: Marcelo Ricardo Leitner marcelo.leitner@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/sctp/input.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/sctp/input.c b/net/sctp/input.c index 12d821ea8a1f..8f4574c4aa6c 100644 --- a/net/sctp/input.c +++ b/net/sctp/input.c @@ -1165,7 +1165,7 @@ static struct sctp_association *__sctp_rcv_walk_lookup(struct net *net,
ch = (sctp_chunkhdr_t *) ch_end; chunk_num++; - } while (ch_end < skb_tail_pointer(skb)); + } while (ch_end + sizeof(*ch) < skb_tail_pointer(skb));
return asoc; }
linux-stable-mirror@lists.linaro.org
-
Sasha Levin