When babble condition happens, the musb controller might automatically turns off VBUS. On DA8xx platform, the controller generates drvvbus interrupt for turning off VBUS along with the babble interrupt.

In this case, we should handle the babble interrupt first and recover from the babble condition.

This change ignores the drvvbus interrupt if babble interrupt is also generated at the same time, so the babble recovery routine works properly.

Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Bin Liu b-liu@ti.com --- drivers/usb/musb/da8xx.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 0397606a211b..6c036de63272 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -284,7 +284,15 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; portstate(musb->port1_status |= USB_PORT_STAT_POWER); del_timer(&musb->dev_timer); - } else { + } else if (!(musb->int_usb & MUSB_INTR_BABBLE)) { + /* + * When babble condition happens, drvvbus interrupt + * is also generated. Ignore this drvvbus interrupt + * and let babble interrupt handler recovers the + * controller; otherwise, the host-mode flag is lost + * due to the MUSB_DEV_MODE() call below and babble + * recovery logic will not be called. + */ musb->is_active = 0; MUSB_DEV_MODE(musb); otg->default_a = 0;