Pin PH11 is used on various A83T board to detect a change in the OTG port's ID pin, as in when an OTG host cable is plugged in.

The incorrect offset meant the gpiochip/irqchip was activating the wrong pin for interrupts.

Fixes: 4730f33f0d82 ("pinctrl: sunxi: add allwinner A83T PIO controller support") Cc: stable@vger.kernel.org Signed-off-by: Chen-Yu Tsai wens@csie.org --- drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c index 6624499eae72..4ada80317a3b 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c @@ -568,7 +568,7 @@ static const struct sunxi_desc_pin sun8i_a83t_pins[] = { SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 11), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 1)), /* PH_EINT11 */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 11)), /* PH_EINT11 */ };

static const struct sunxi_pinctrl_desc sun8i_a83t_pinctrl_data = {