From: Maxim Kochetkov fido_max@inbox.ru
[ Upstream commit ab6ecfbf40fccf74b6ec2ba7ed6dd2fc024c3af2 ]
On slow CPU (FPGA/QEMU emulated) printing overrun messages from interrupt handler to uart console may leads to more overrun errors. So use dev_err_ratelimited to limit the number of error messages.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru Link: https://lore.kernel.org/r/20230505062820.21840-1-fido_max@inbox.ru Signed-off-by: Mark Brown <broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/dwc/dwc-i2s.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/dwc/dwc-i2s.c b/sound/soc/dwc/dwc-i2s.c index 36da0f01571a1..5469399abcb44 100644 --- a/sound/soc/dwc/dwc-i2s.c +++ b/sound/soc/dwc/dwc-i2s.c @@ -132,13 +132,13 @@ static irqreturn_t i2s_irq_handler(int irq, void *dev_id)
/* Error Handling: TX */ if (isr[i] & ISR_TXFO) { - dev_err(dev->dev, "TX overrun (ch_id=%d)\n", i); + dev_err_ratelimited(dev->dev, "TX overrun (ch_id=%d)\n", i); irq_valid = true; }
/* Error Handling: TX */ if (isr[i] & ISR_RXFO) { - dev_err(dev->dev, "RX overrun (ch_id=%d)\n", i); + dev_err_ratelimited(dev->dev, "RX overrun (ch_id=%d)\n", i); irq_valid = true; } }
From: Mark Brown broonie@kernel.org
[ Upstream commit dbcf76390eb9a65d5d0c37b0cd57335218564e37 ]
The ftrace selftests do not currently produce KTAP output, they produce a custom format much nicer for human consumption. This means that when run in automated test systems we just get a single result for the suite as a whole rather than recording results for individual test cases, making it harder to look at the test data and masking things like inappropriate skips.
Address this by adding support for KTAP output to the ftracetest script and providing a trivial wrapper which will be invoked by the kselftest runner to generate output in this format by default, users using ftracetest directly will continue to get the existing output.
This is not the most elegant solution but it is simple and effective. I did consider implementing this by post processing the existing output format but that felt more complex and likely to result in all output being lost if something goes seriously wrong during the run which would not be helpful. I did also consider just writing a separate runner script but there's enough going on with things like the signal handling for that to seem like it would be duplicating too much.
Acked-by: Steven Rostedt (Google) rostedt@goodmis.org Acked-by: Masami Hiramatsu (Google) mhiramat@kernel.org Tested-by: Masami Hiramatsu (Google) mhiramat@kernel.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/ftrace/Makefile | 3 +- tools/testing/selftests/ftrace/ftracetest | 63 ++++++++++++++++++- .../testing/selftests/ftrace/ftracetest-ktap | 8 +++ 3 files changed, 70 insertions(+), 4 deletions(-) create mode 100755 tools/testing/selftests/ftrace/ftracetest-ktap
diff --git a/tools/testing/selftests/ftrace/Makefile b/tools/testing/selftests/ftrace/Makefile index d6e106fbce11c..a1e955d2de4cc 100644 --- a/tools/testing/selftests/ftrace/Makefile +++ b/tools/testing/selftests/ftrace/Makefile @@ -1,7 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 all:
-TEST_PROGS := ftracetest +TEST_PROGS_EXTENDED := ftracetest +TEST_PROGS := ftracetest-ktap TEST_FILES := test.d settings EXTRA_CLEAN := $(OUTPUT)/logs/*
diff --git a/tools/testing/selftests/ftrace/ftracetest b/tools/testing/selftests/ftrace/ftracetest index 8ec1922e974eb..9a73a110a8bfc 100755 --- a/tools/testing/selftests/ftrace/ftracetest +++ b/tools/testing/selftests/ftrace/ftracetest @@ -13,6 +13,7 @@ echo "Usage: ftracetest [options] [testcase(s)] [testcase-directory(s)]" echo " Options:" echo " -h|--help Show help message" echo " -k|--keep Keep passed test logs" +echo " -K|--ktap Output in KTAP format" echo " -v|--verbose Increase verbosity of test messages" echo " -vv Alias of -v -v (Show all results in stdout)" echo " -vvv Alias of -v -v -v (Show all commands immediately)" @@ -85,6 +86,10 @@ parse_opts() { # opts KEEP_LOG=1 shift 1 ;; + --ktap|-K) + KTAP=1 + shift 1 + ;; --verbose|-v|-vv|-vvv) if [ $VERBOSE -eq -1 ]; then usage "--console can not use with --verbose" @@ -178,6 +183,7 @@ TEST_DIR=$TOP_DIR/test.d TEST_CASES=`find_testcases $TEST_DIR` LOG_DIR=$TOP_DIR/logs/`date +%Y%m%d-%H%M%S`/ KEEP_LOG=0 +KTAP=0 DEBUG=0 VERBOSE=0 UNSUPPORTED_RESULT=0 @@ -229,7 +235,7 @@ prlog() { # messages newline= shift fi - printf "$*$newline" + [ "$KTAP" != "1" ] && printf "$*$newline" [ "$LOG_FILE" ] && printf "$*$newline" | strip_esc >> $LOG_FILE } catlog() { #file @@ -260,11 +266,11 @@ TOTAL_RESULT=0
INSTANCE= CASENO=0 +CASENAME=
testcase() { # testfile CASENO=$((CASENO+1)) - desc=`grep "^#[ \t]*description:" $1 | cut -f2- -d:` - prlog -n "[$CASENO]$INSTANCE$desc" + CASENAME=`grep "^#[ \t]*description:" $1 | cut -f2- -d:` }
checkreq() { # testfile @@ -277,40 +283,68 @@ test_on_instance() { # testfile grep -q "^#[ \t]*flags:.*instance" $1 }
+ktaptest() { # result comment + if [ "$KTAP" != "1" ]; then + return + fi + + local result= + if [ "$1" = "1" ]; then + result="ok" + else + result="not ok" + fi + shift + + local comment=$* + if [ "$comment" != "" ]; then + comment="# $comment" + fi + + echo $CASENO $result $INSTANCE$CASENAME $comment +} + eval_result() { # sigval case $1 in $PASS) prlog " [${color_green}PASS${color_reset}]" + ktaptest 1 PASSED_CASES="$PASSED_CASES $CASENO" return 0 ;; $FAIL) prlog " [${color_red}FAIL${color_reset}]" + ktaptest 0 FAILED_CASES="$FAILED_CASES $CASENO" return 1 # this is a bug. ;; $UNRESOLVED) prlog " [${color_blue}UNRESOLVED${color_reset}]" + ktaptest 0 UNRESOLVED UNRESOLVED_CASES="$UNRESOLVED_CASES $CASENO" return $UNRESOLVED_RESULT # depends on use case ;; $UNTESTED) prlog " [${color_blue}UNTESTED${color_reset}]" + ktaptest 1 SKIP UNTESTED_CASES="$UNTESTED_CASES $CASENO" return 0 ;; $UNSUPPORTED) prlog " [${color_blue}UNSUPPORTED${color_reset}]" + ktaptest 1 SKIP UNSUPPORTED_CASES="$UNSUPPORTED_CASES $CASENO" return $UNSUPPORTED_RESULT # depends on use case ;; $XFAIL) prlog " [${color_green}XFAIL${color_reset}]" + ktaptest 1 XFAIL XFAILED_CASES="$XFAILED_CASES $CASENO" return 0 ;; *) prlog " [${color_blue}UNDEFINED${color_reset}]" + ktaptest 0 error UNDEFINED_CASES="$UNDEFINED_CASES $CASENO" return 1 # this must be a test bug ;; @@ -371,6 +405,7 @@ __run_test() { # testfile run_test() { # testfile local testname=`basename $1` testcase $1 + prlog -n "[$CASENO]$INSTANCE$CASENAME" if [ ! -z "$LOG_FILE" ] ; then local testlog=`mktemp $LOG_DIR/${CASENO}-${testname}-log.XXXXXX` else @@ -405,6 +440,17 @@ run_test() { # testfile # load in the helper functions . $TEST_DIR/functions
+if [ "$KTAP" = "1" ]; then + echo "TAP version 13" + + casecount=`echo $TEST_CASES | wc -w` + for t in $TEST_CASES; do + test_on_instance $t || continue + casecount=$((casecount+1)) + done + echo "1..${casecount}" +fi + # Main loop for t in $TEST_CASES; do run_test $t @@ -439,6 +485,17 @@ prlog "# of unsupported: " `echo $UNSUPPORTED_CASES | wc -w` prlog "# of xfailed: " `echo $XFAILED_CASES | wc -w` prlog "# of undefined(test bug): " `echo $UNDEFINED_CASES | wc -w`
+if [ "$KTAP" = "1" ]; then + echo -n "# Totals:" + echo -n " pass:"`echo $PASSED_CASES | wc -w` + echo -n " faii:"`echo $FAILED_CASES | wc -w` + echo -n " xfail:"`echo $XFAILED_CASES | wc -w` + echo -n " xpass:0" + echo -n " skip:"`echo $UNTESTED_CASES $UNSUPPORTED_CASES | wc -w` + echo -n " error:"`echo $UNRESOLVED_CASES $UNDEFINED_CASES | wc -w` + echo +fi + cleanup
# if no error, return 0 diff --git a/tools/testing/selftests/ftrace/ftracetest-ktap b/tools/testing/selftests/ftrace/ftracetest-ktap new file mode 100755 index 0000000000000..b3284679ef3af --- /dev/null +++ b/tools/testing/selftests/ftrace/ftracetest-ktap @@ -0,0 +1,8 @@ +#!/bin/sh -e +# SPDX-License-Identifier: GPL-2.0-only +# +# ftracetest-ktap: Wrapper to integrate ftracetest with the kselftest runner +# +# Copyright (C) Arm Ltd., 2023 + +./ftracetest -K
From: Benedict Wong benedictwong@google.com
[ Upstream commit 8680407b6f8f5fba59e8f1d63c869abc280f04df ]
This change ensures that if configured in the policy, the if_id set in the policy and secpath states match during the inbound policy check. Without this, there is potential for ambiguity where entries in the secpath differing by only the if_id could be mismatched.
Notably, this is checked in the outbound direction when resolving templates to SAs, but not on the inbound path when matching SAs and policies.
Test: Tested against Android kernel unit tests & CTS Signed-off-by: Benedict Wong benedictwong@google.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/xfrm/xfrm_policy.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index d15aa62887de0..aa88a8c389abb 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -3240,7 +3240,7 @@ xfrm_secpath_reject(int idx, struct sk_buff *skb, const struct flowi *fl)
static inline int xfrm_state_ok(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x, - unsigned short family) + unsigned short family, u32 if_id) { if (xfrm_state_kern(x)) return tmpl->optional && !xfrm_state_addr_cmp(tmpl, x, tmpl->encap_family); @@ -3251,7 +3251,8 @@ xfrm_state_ok(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x, (tmpl->allalgs || (tmpl->aalgos & (1<<x->props.aalgo)) || !(xfrm_id_proto_match(tmpl->id.proto, IPSEC_PROTO_ANY))) && !(x->props.mode != XFRM_MODE_TRANSPORT && - xfrm_state_addr_cmp(tmpl, x, family)); + xfrm_state_addr_cmp(tmpl, x, family)) && + (if_id == 0 || if_id == x->if_id); }
/* @@ -3263,7 +3264,7 @@ xfrm_state_ok(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x, */ static inline int xfrm_policy_ok(const struct xfrm_tmpl *tmpl, const struct sec_path *sp, int start, - unsigned short family) + unsigned short family, u32 if_id) { int idx = start;
@@ -3273,7 +3274,7 @@ xfrm_policy_ok(const struct xfrm_tmpl *tmpl, const struct sec_path *sp, int star } else start = -1; for (; idx < sp->len; idx++) { - if (xfrm_state_ok(tmpl, sp->xvec[idx], family)) + if (xfrm_state_ok(tmpl, sp->xvec[idx], family, if_id)) return ++idx; if (sp->xvec[idx]->props.mode != XFRM_MODE_TRANSPORT) { if (start == -1) @@ -3695,7 +3696,7 @@ int __xfrm_policy_check(struct sock *sk, int dir, struct sk_buff *skb, * are implied between each two transformations. */ for (i = xfrm_nr-1, k = 0; i >= 0; i--) { - k = xfrm_policy_ok(tpp[i], sp, k, family); + k = xfrm_policy_ok(tpp[i], sp, k, family, if_id); if (k < 0) { if (k < -1) /* "-2 - errored_index" returned */
From: Martin Povišer povik+lin@cutebit.org
[ Upstream commit efb2bfd7b3d210c479b9361c176d7426e5eb8663 ]
A bunch of TI's codecs have binding schemas which force #sound-dai-cells to one despite those codecs only having a single DAI. Allow for bindings with zero DAI cells and deprecate the former non-zero value.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org Link: https://lore.kernel.org/r/20230509153412.62847-1-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- Documentation/devicetree/bindings/sound/tas2562.yaml | 6 ++++-- Documentation/devicetree/bindings/sound/tas2764.yaml | 6 ++++-- Documentation/devicetree/bindings/sound/tas2770.yaml | 6 ++++-- 3 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml index 27f7132ba2ef0..6ccb346d4a4d5 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -50,7 +50,9 @@ properties: description: TDM TX current sense time slot.
'#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1]
required: - compatible @@ -67,7 +69,7 @@ examples: codec: codec@4c { compatible = "ti,tas2562"; reg = <0x4c>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; shutdown-gpios = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/tas2764.yaml b/Documentation/devicetree/bindings/sound/tas2764.yaml index 5bf8c76ecda11..1ffe1a01668fe 100644 --- a/Documentation/devicetree/bindings/sound/tas2764.yaml +++ b/Documentation/devicetree/bindings/sound/tas2764.yaml @@ -46,7 +46,9 @@ properties: description: TDM TX voltage sense time slot.
'#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1]
required: - compatible @@ -63,7 +65,7 @@ examples: codec: codec@38 { compatible = "ti,tas2764"; reg = <0x38>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; reset-gpios = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml index 07e7f9951d2ed..f3d0ca067bea4 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -52,7 +52,9 @@ properties: - 1 # Falling edge
'#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1]
required: - compatible @@ -69,7 +71,7 @@ examples: codec: codec@41 { compatible = "ti,tas2770"; reg = <0x41>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; reset-gpio = <&gpio1 15 0>;
From: Paweł Anikiel pan@semihalf.com
[ Upstream commit f63550e2b165208a2f382afcaf5551df9569e1d4 ]
Apply a workaround for what appears to be a hardware quirk.
The problem seems to happen when enabling "whole chip power" (bit D7 register R6) for the very first time after the chip receives power. If either "output" (D4) or "DAC" (D3) aren't powered on at that time, playback becomes very distorted later on.
This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10: https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-... I suspect this happens only when using an external MCLK signal (which is the case for both of these boards).
Here are some experiments run on a Google Chameleon v3. These were run in userspace using a wrapper around the i2cset utility: ssmset() { i2cset -y 0 0x1a $(($1*2)) $2 }
For each of the following sequences, we apply power to the ssm2603 chip, set the configuration registers R0-R5 and R7-R8, run the selected sequence, and check for distortions on playback.
ssmset 0x09 0x01 # core ssmset 0x06 0x07 # chip, out, dac OK
ssmset 0x09 0x01 # core ssmset 0x06 0x87 # out, dac ssmset 0x06 0x07 # chip OK
(disable MCLK) ssmset 0x09 0x01 # core ssmset 0x06 0x1f # chip ssmset 0x06 0x07 # out, dac (enable MCLK) OK
ssmset 0x09 0x01 # core ssmset 0x06 0x1f # chip ssmset 0x06 0x07 # out, dac NOT OK
ssmset 0x06 0x1f # chip ssmset 0x09 0x01 # core ssmset 0x06 0x07 # out, dac NOT OK
ssmset 0x09 0x01 # core ssmset 0x06 0x0f # chip, out ssmset 0x06 0x07 # dac NOT OK
ssmset 0x09 0x01 # core ssmset 0x06 0x17 # chip, dac ssmset 0x06 0x07 # out NOT OK
For each of the following sequences, we apply power to the ssm2603 chip, run the selected sequence, issue a reset with R15, configure R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check for distortions.
ssmset 0x09 0x01 # core ssmset 0x06 0x07 # chip, out, dac OK
(disable MCLK) ssmset 0x09 0x01 # core ssmset 0x06 0x07 # chip, out, dac (enable MCLK after reset) NOT OK
ssmset 0x09 0x01 # core ssmset 0x06 0x17 # chip, dac NOT OK
ssmset 0x09 0x01 # core ssmset 0x06 0x0f # chip, out NOT OK
ssmset 0x06 0x07 # chip, out, dac NOT OK
Signed-off-by: Paweł Anikiel <pan@semihalf.com Link: https://lore.kernel.org/r/20230508113037.137627-8-pan@semihalf.com Signed-off-by: Mark Brown <broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/ssm2602.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c index 9051602466146..c7a90c34d8f08 100644 --- a/sound/soc/codecs/ssm2602.c +++ b/sound/soc/codecs/ssm2602.c @@ -53,6 +53,18 @@ static const struct reg_default ssm2602_reg[SSM2602_CACHEREGNUM] = { { .reg = 0x09, .def = 0x0000 } };
+/* + * ssm2602 register patch + * Workaround for playback distortions after power up: activates digital + * core, and then powers on output, DAC, and whole chip at the same time + */ + +static const struct reg_sequence ssm2602_patch[] = { + { SSM2602_ACTIVE, 0x01 }, + { SSM2602_PWR, 0x07 }, + { SSM2602_RESET, 0x00 }, +}; +
/*Appending several "None"s just for OSS mixer use*/ static const char *ssm2602_input_select[] = { @@ -589,6 +601,9 @@ static int ssm260x_component_probe(struct snd_soc_component *component) return ret; }
+ regmap_register_patch(ssm2602->regmap, ssm2602_patch, + ARRAY_SIZE(ssm2602_patch)); + /* set the update bits */ regmap_update_bits(ssm2602->regmap, SSM2602_LINVOL, LINVOL_LRIN_BOTH, LINVOL_LRIN_BOTH);
From: YongSu Yoo yongsuyoo0215@gmail.com
[ Upstream commit 7efb10d8dc70ea3000cc70dca53407c52488acd1 ]
In dvb_demux.c, some logics exist which compare the expected continuity counter and the real continuity counter. If they are not matched each other, both of the expected continuity counter and the real continuity counter should be printed. But there exists a bug that the expected continuity counter is not correctly printed. The expected continuity counter is replaced with the real countinuity counter + 1 so that the epected continuity counter is not correclty printed. This is wrong. This bug is fixed.
Link: https://lore.kernel.org/linux-media/20230305212519.499-1-yongsuyoo0215@gmail...
Signed-off-by: YongSu Yoo yongsuyoo0215@gmail.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/dvb-core/dvb_demux.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c index 5fde1d38b3e34..80b495982f63c 100644 --- a/drivers/media/dvb-core/dvb_demux.c +++ b/drivers/media/dvb-core/dvb_demux.c @@ -125,12 +125,12 @@ static inline int dvb_dmx_swfilter_payload(struct dvb_demux_feed *feed,
cc = buf[3] & 0x0f; ccok = ((feed->cc + 1) & 0x0f) == cc; - feed->cc = cc; if (!ccok) { set_buf_flags(feed, DMX_BUFFER_FLAG_DISCONTINUITY_DETECTED); dprintk_sect_loss("missed packet: %d instead of %d!\n", cc, (feed->cc + 1) & 0x0f); } + feed->cc = cc;
if (buf[1] & 0x40) // PUSI ? feed->peslen = 0xfffa; @@ -310,7 +310,6 @@ static int dvb_dmx_swfilter_section_packet(struct dvb_demux_feed *feed,
cc = buf[3] & 0x0f; ccok = ((feed->cc + 1) & 0x0f) == cc; - feed->cc = cc;
if (buf[3] & 0x20) { /* adaption field present, check for discontinuity_indicator */ @@ -346,6 +345,7 @@ static int dvb_dmx_swfilter_section_packet(struct dvb_demux_feed *feed, feed->pusi_seen = false; dvb_dmx_swfilter_section_new(feed); } + feed->cc = cc;
if (buf[1] & 0x40) { /* PUSI=1 (is set), section boundary is here */
From: Wei Chen harperchen1110@gmail.com
[ Upstream commit 858e97d7956d17a2cb56a9413468704a4d5abfe1 ]
In az6027_i2c_xfer, msg is controlled by user. When msg[i].buf is null, commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") fix the null-ptr-deref bug when msg[i].addr is 0x99. However, null-ptr-deref also happens when msg[i].addr is 0xd0 and 0xc0. We add check on msg[i].len to prevent null-ptr-deref.
Link: https://lore.kernel.org/linux-media/20230310165604.3093483-1-harperchen1110@... Signed-off-by: Wei Chen harperchen1110@gmail.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/dvb-usb/az6027.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/drivers/media/usb/dvb-usb/az6027.c b/drivers/media/usb/dvb-usb/az6027.c index 32b4ee65c2802..991f4510aaebb 100644 --- a/drivers/media/usb/dvb-usb/az6027.c +++ b/drivers/media/usb/dvb-usb/az6027.c @@ -988,6 +988,10 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n /* write/read request */ if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) { req = 0xB9; + if (msg[i].len < 1) { + i = -EOPNOTSUPP; + break; + } index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff)); value = msg[i].addr + (msg[i].len << 8); length = msg[i + 1].len + 6; @@ -1001,6 +1005,10 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
/* demod 16bit addr */ req = 0xBD; + if (msg[i].len < 1) { + i = -EOPNOTSUPP; + break; + } index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff)); value = msg[i].addr + (2 << 8); length = msg[i].len - 2; @@ -1026,6 +1034,10 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n } else {
req = 0xBD; + if (msg[i].len < 1) { + i = -EOPNOTSUPP; + break; + } index = msg[i].buf[0] & 0x00FF; value = msg[i].addr + (1 << 8); length = msg[i].len - 1;
From: Wei Chen harperchen1110@gmail.com
[ Upstream commit a6dcefcc08eca1bf4e3d213c97c3cfb75f377935 ]
In ec168_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. If accessing msg[i].buf[0] without sanity check, null pointer deref would happen. We add check on msg[i].len to prevent crash.
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Link: https://lore.kernel.org/linux-media/20230313085853.3252349-1-harperchen1110@... Signed-off-by: Wei Chen harperchen1110@gmail.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/dvb-usb-v2/ec168.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/drivers/media/usb/dvb-usb-v2/ec168.c b/drivers/media/usb/dvb-usb-v2/ec168.c index 7ed0ab9e429b1..0e4773fc025c9 100644 --- a/drivers/media/usb/dvb-usb-v2/ec168.c +++ b/drivers/media/usb/dvb-usb-v2/ec168.c @@ -115,6 +115,10 @@ static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], while (i < num) { if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { if (msg[i].addr == ec168_ec100_config.demod_address) { + if (msg[i].len < 1) { + i = -EOPNOTSUPP; + break; + } req.cmd = READ_DEMOD; req.value = 0; req.index = 0xff00 + msg[i].buf[0]; /* reg */ @@ -131,6 +135,10 @@ static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], } } else { if (msg[i].addr == ec168_ec100_config.demod_address) { + if (msg[i].len < 1) { + i = -EOPNOTSUPP; + break; + } req.cmd = WRITE_DEMOD; req.value = msg[i].buf[1]; /* val */ req.index = 0xff00 + msg[i].buf[0]; /* reg */ @@ -139,6 +147,10 @@ static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], ret = ec168_ctrl_msg(d, &req); i += 1; } else { + if (msg[i].len < 1) { + i = -EOPNOTSUPP; + break; + } req.cmd = WRITE_I2C; req.value = msg[i].buf[0]; /* val */ req.index = 0x0100 + msg[i].addr; /* I2C addr */
From: Wei Chen harperchen1110@gmail.com
[ Upstream commit dff919090155fb22679869e8469168f270dcd97f ]
In ce6230_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach ce6230_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash.
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Link: https://lore.kernel.org/linux-media/20230313092751.209496-1-harperchen1110@g... Signed-off-by: Wei Chen harperchen1110@gmail.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/dvb-usb-v2/ce6230.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/media/usb/dvb-usb-v2/ce6230.c b/drivers/media/usb/dvb-usb-v2/ce6230.c index 44540de1a2066..d3b5cb4a24daf 100644 --- a/drivers/media/usb/dvb-usb-v2/ce6230.c +++ b/drivers/media/usb/dvb-usb-v2/ce6230.c @@ -101,6 +101,10 @@ static int ce6230_i2c_master_xfer(struct i2c_adapter *adap, if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { if (msg[i].addr == ce6230_zl10353_config.demod_address) { + if (msg[i].len < 1) { + i = -EOPNOTSUPP; + break; + } req.cmd = DEMOD_READ; req.value = msg[i].addr >> 1; req.index = msg[i].buf[0]; @@ -117,6 +121,10 @@ static int ce6230_i2c_master_xfer(struct i2c_adapter *adap, } else { if (msg[i].addr == ce6230_zl10353_config.demod_address) { + if (msg[i].len < 1) { + i = -EOPNOTSUPP; + break; + } req.cmd = DEMOD_WRITE; req.value = msg[i].addr >> 1; req.index = msg[i].buf[0];
From: Zhang Shurong zhang_shurong@foxmail.com
[ Upstream commit aa4a447b81b84f69c1a89ad899df157f386d7636 ]
In rtl28xxu_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach rtl28xxu_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash.
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Link: https://lore.kernel.org/linux-media/tencent_3623572106754AC2F266B316798B0F6C... Signed-off-by: Zhang Shurong zhang_shurong@foxmail.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index c278b9b0f1024..70a2f04942164 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -176,6 +176,10 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], ret = -EOPNOTSUPP; goto err_mutex_unlock; } else if (msg[0].addr == 0x10) { + if (msg[0].len < 1 || msg[1].len < 1) { + ret = -EOPNOTSUPP; + goto err_mutex_unlock; + } /* method 1 - integrated demod */ if (msg[0].buf[0] == 0x00) { /* return demod page from driver cache */ @@ -189,6 +193,10 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], ret = rtl28xxu_ctrl_msg(d, &req); } } else if (msg[0].len < 2) { + if (msg[0].len < 1) { + ret = -EOPNOTSUPP; + goto err_mutex_unlock; + } /* method 2 - old I2C */ req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); req.index = CMD_I2C_RD; @@ -217,8 +225,16 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], ret = -EOPNOTSUPP; goto err_mutex_unlock; } else if (msg[0].addr == 0x10) { + if (msg[0].len < 1) { + ret = -EOPNOTSUPP; + goto err_mutex_unlock; + } /* method 1 - integrated demod */ if (msg[0].buf[0] == 0x00) { + if (msg[0].len < 2) { + ret = -EOPNOTSUPP; + goto err_mutex_unlock; + } /* save demod page for later demod access */ dev->page = msg[0].buf[1]; ret = 0; @@ -231,6 +247,10 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], ret = rtl28xxu_ctrl_msg(d, &req); } } else if ((msg[0].len < 23) && (!dev->new_i2c_write)) { + if (msg[0].len < 1) { + ret = -EOPNOTSUPP; + goto err_mutex_unlock; + } /* method 2 - old I2C */ req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); req.index = CMD_I2C_WR;
From: Wei Chen harperchen1110@gmail.com
[ Upstream commit 9ded5bd2a49ce3015b7c936743eec0a0e6e11f0c ]
In digitv_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach digitv_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash.
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Link: https://lore.kernel.org/linux-media/20230313095008.1039689-1-harperchen1110@... Signed-off-by: Wei Chen harperchen1110@gmail.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/dvb-usb/digitv.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c index 4e3b3c064bcfb..e56efebd4f0a1 100644 --- a/drivers/media/usb/dvb-usb/digitv.c +++ b/drivers/media/usb/dvb-usb/digitv.c @@ -63,6 +63,10 @@ static int digitv_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num warn("more than 2 i2c messages at a time is not handled yet. TODO.");
for (i = 0; i < num; i++) { + if (msg[i].len < 1) { + i = -EOPNOTSUPP; + break; + } /* write/read request */ if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { if (digitv_ctrl_msg(d, USB_READ_COFDM, msg[i].buf[0], NULL, 0,
From: Wei Chen harperchen1110@gmail.com
[ Upstream commit a3fd1ef27aa686d871cefe207bd6168c4b0cd29e ]
In su3000_read_mac_address, if i2c_transfer fails to execute two messages, array mac address will not be initialized. Without handling such error, later in function dvb_usb_adapter_dvb_init, proposed_mac is accessed before initialization.
Fix this error by returning a negative value if message execution fails.
Link: https://lore.kernel.org/linux-media/20230328124416.560889-1-harperchen1110@g... Signed-off-by: Wei Chen harperchen1110@gmail.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/dvb-usb/dw2102.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c index aa929db56db1f..3c4ac998d040f 100644 --- a/drivers/media/usb/dvb-usb/dw2102.c +++ b/drivers/media/usb/dvb-usb/dw2102.c @@ -946,7 +946,7 @@ static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) for (i = 0; i < 6; i++) { obuf[1] = 0xf0 + i; if (i2c_transfer(&d->i2c_adap, msg, 2) != 2) - break; + return -1; else mac[i] = ibuf[0]; }
From: Wei Chen harperchen1110@gmail.com
[ Upstream commit e6ad6233592593079db5c8fa592c298e51bc1356 ]
IRQ handler netup_spi_interrupt() takes spinlock spi->lock. The lock is initialized in netup_spi_init(). However, irq handler is registered before initializing the lock.
Spinlock dma->lock and i2c->lock suffer from the same problem.
Fix this by registering the irq at the end of probe.
Link: https://lore.kernel.org/linux-media/20230315134518.1074497-1-harperchen1110@... Signed-off-by: Wei Chen harperchen1110@gmail.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../media/pci/netup_unidvb/netup_unidvb_core.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c index 77bae14685513..3fa1d178e70fd 100644 --- a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c +++ b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c @@ -887,12 +887,7 @@ static int netup_unidvb_initdev(struct pci_dev *pci_dev, ndev->lmmio0, (u32)pci_resource_len(pci_dev, 0), ndev->lmmio1, (u32)pci_resource_len(pci_dev, 1), pci_dev->irq); - if (request_irq(pci_dev->irq, netup_unidvb_isr, IRQF_SHARED, - "netup_unidvb", pci_dev) < 0) { - dev_err(&pci_dev->dev, - "%s(): can't get IRQ %d\n", __func__, pci_dev->irq); - goto irq_request_err; - } + ndev->dma_size = 2 * 188 * NETUP_DMA_BLOCKS_COUNT * NETUP_DMA_PACKETS_COUNT; ndev->dma_virt = dma_alloc_coherent(&pci_dev->dev, @@ -933,6 +928,14 @@ static int netup_unidvb_initdev(struct pci_dev *pci_dev, dev_err(&pci_dev->dev, "netup_unidvb: DMA setup failed\n"); goto dma_setup_err; } + + if (request_irq(pci_dev->irq, netup_unidvb_isr, IRQF_SHARED, + "netup_unidvb", pci_dev) < 0) { + dev_err(&pci_dev->dev, + "%s(): can't get IRQ %d\n", __func__, pci_dev->irq); + goto dma_setup_err; + } + dev_info(&pci_dev->dev, "netup_unidvb: device has been initialized\n"); return 0; @@ -951,8 +954,6 @@ static int netup_unidvb_initdev(struct pci_dev *pci_dev, dma_free_coherent(&pci_dev->dev, ndev->dma_size, ndev->dma_virt, ndev->dma_phys); dma_alloc_err: - free_irq(pci_dev->irq, pci_dev); -irq_request_err: iounmap(ndev->lmmio1); pci_bar1_error: iounmap(ndev->lmmio0);
From: YongSu Yoo yongsuyoo0215@gmail.com
[ Upstream commit a4315e5be7020aac9b24a8151caf4bb85224cd0e ]
The function of "dvb_ca_en50221_write_data" at source/drivers/media /dvb-core/dvb_ca_en50221.c is used for two cases. The first case is for writing APDU data in the function of "dvb_ca_en50221_io_write" at source/drivers/media/dvb-core/ dvb_ca_en50221.c. The second case is for writing the host link buf size on the Command Register in the function of "dvb_ca_en50221_link_init" at source/drivers/media/dvb-core/dvb_ca_en50221.c. In the second case, there exists a bug like following. In the function of the "dvb_ca_en50221_link_init", after a TV host calculates the host link buf_size, the TV host writes the calculated host link buf_size on the Size Register. Accroding to the en50221 Spec (the page 60 of https://dvb.org/wp-content/uploads/2020/02/En50221.V1.pdf), before this writing operation, the "SW(CMDREG_SW)" flag in the Command Register should be set. We can see this setting operation in the function of the "dvb_ca_en50221_link_init" like below. ... if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SW)) != 0) return ret; ... But, after that, the real writing operation is implemented using the function of the "dvb_ca_en50221_write_data" in the function of "dvb_ca_en50221_link_init", and the "dvb_ca_en50221_write_data" includes the function of "ca->pub->write_cam_control", and the function of the "ca->pub->write_cam_control" in the function of the "dvb_ca_en50221_wrte_data" does not include "CMDREG_SW" flag like below. ... if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_HC)) != 0) ... In the above source code, we can see only the "IRQEN | CMDREG_HC", but we cannot see the "CMDREG_SW". The "CMDREG_SW" flag which was set in the function of the "dvb_ca_en50221_link_init" was rollbacked by the follwoing function of the "dvb_ca_en50221_write_data". This is a bug. and this bug causes that the calculated host link buf_size is not properly written in the CI module. Through this patch, we fix this bug.
Link: https://lore.kernel.org/linux-media/20220818125027.1131-1-yongsuyoo0215@gmai... Signed-off-by: YongSu Yoo yongsuyoo0215@gmail.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/dvb-core/dvb_ca_en50221.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c index fd476536d32ed..b1a7b5f8b9aa4 100644 --- a/drivers/media/dvb-core/dvb_ca_en50221.c +++ b/drivers/media/dvb-core/dvb_ca_en50221.c @@ -187,7 +187,7 @@ static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca); static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 *ebuf, int ecount); static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, - u8 *ebuf, int ecount); + u8 *ebuf, int ecount, int size_write_flag);
/** * Safely find needle in haystack. @@ -370,7 +370,7 @@ static int dvb_ca_en50221_link_init(struct dvb_ca_private *ca, int slot) ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_FR, HZ / 10); if (ret) return ret; - ret = dvb_ca_en50221_write_data(ca, slot, buf, 2); + ret = dvb_ca_en50221_write_data(ca, slot, buf, 2, CMDREG_SW); if (ret != 2) return -EIO; ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN); @@ -778,11 +778,13 @@ static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, * @buf: The data in this buffer is treated as a complete link-level packet to * be written. * @bytes_write: Size of ebuf. + * @size_write_flag: A flag on Command Register which says whether the link size + * information will be writen or not. * * return: Number of bytes written, or < 0 on error. */ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, - u8 *buf, int bytes_write) + u8 *buf, int bytes_write, int size_write_flag) { struct dvb_ca_slot *sl = &ca->slot_info[slot]; int status; @@ -817,7 +819,7 @@ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot,
/* OK, set HC bit */ status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, - IRQEN | CMDREG_HC); + IRQEN | CMDREG_HC | size_write_flag); if (status) goto exit;
@@ -1505,7 +1507,7 @@ static ssize_t dvb_ca_en50221_io_write(struct file *file,
mutex_lock(&sl->slot_lock); status = dvb_ca_en50221_write_data(ca, slot, fragbuf, - fraglen + 2); + fraglen + 2, 0); mutex_unlock(&sl->slot_lock); if (status == (fraglen + 2)) { written = 1;
From: Hyunwoo Kim imv4bel@gmail.com
[ Upstream commit 517a281338322ff8293f988771c98aaa7205e457 ]
Since dvb_frontend_detach() is not called in ttusb_dec_exit_dvb(), which is called when the device is disconnected, dvb_frontend_free() is not finally called.
This causes a memory leak just by repeatedly plugging and unplugging the device.
Fix this issue by adding dvb_frontend_detach() to ttusb_dec_exit_dvb().
Link: https://lore.kernel.org/linux-media/20221117045925.14297-5-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim imv4bel@gmail.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/ttusb-dec/ttusb_dec.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/usb/ttusb-dec/ttusb_dec.c b/drivers/media/usb/ttusb-dec/ttusb_dec.c index df6c5e4a0f058..68f88143c8a6e 100644 --- a/drivers/media/usb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/usb/ttusb-dec/ttusb_dec.c @@ -1551,8 +1551,7 @@ static void ttusb_dec_exit_dvb(struct ttusb_dec *dec) dvb_dmx_release(&dec->demux); if (dec->fe) { dvb_unregister_frontend(dec->fe); - if (dec->fe->ops.release) - dec->fe->ops.release(dec->fe); + dvb_frontend_detach(dec->fe); } dvb_unregister_adapter(&dec->adapter); }
From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
[ Upstream commit ae11c0efaec32fb45130ee9886689f467232eebc ]
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error:
drivers/media/dvb-frontends/mn88443x.c:782:34: error: ‘mn88443x_of_match’ defined but not used [-Werror=unused-const-variable=]
Link: https://lore.kernel.org/linux-media/20230312131318.351173-28-krzysztof.kozlo... Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/dvb-frontends/mn88443x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/dvb-frontends/mn88443x.c b/drivers/media/dvb-frontends/mn88443x.c index fff212c0bf3b5..05894deb8a19a 100644 --- a/drivers/media/dvb-frontends/mn88443x.c +++ b/drivers/media/dvb-frontends/mn88443x.c @@ -800,7 +800,7 @@ MODULE_DEVICE_TABLE(i2c, mn88443x_i2c_id); static struct i2c_driver mn88443x_driver = { .driver = { .name = "mn88443x", - .of_match_table = of_match_ptr(mn88443x_of_match), + .of_match_table = mn88443x_of_match, }, .probe = mn88443x_probe, .remove = mn88443x_remove,
From: Hyunwoo Kim imv4bel@gmail.com
[ Upstream commit 4172385b0c9ac366dcab78eda48c26814b87ed1a ]
A race condition may occur between the .disconnect function, which is called when the device is disconnected, and the dvb_device_open() function, which is called when the device node is open()ed. This results in several types of UAFs.
The root cause of this is that you use the dvb_device_open() function, which does not implement a conditional statement that checks 'dvbnet->exit'.
So, add 'remove_mutex` to protect 'dvbnet->exit' and use locked_dvb_net_open() function to check 'dvbnet->exit'.
[mchehab: fix a checkpatch warning]
Link: https://lore.kernel.org/linux-media/20221117045925.14297-3-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim imv4bel@gmail.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/dvb-core/dvb_net.c | 38 +++++++++++++++++++++++++++++--- include/media/dvb_net.h | 4 ++++ 2 files changed, 39 insertions(+), 3 deletions(-)
diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c index dddebea644bb8..c594b1bdfcaa5 100644 --- a/drivers/media/dvb-core/dvb_net.c +++ b/drivers/media/dvb-core/dvb_net.c @@ -1564,15 +1564,43 @@ static long dvb_net_ioctl(struct file *file, return dvb_usercopy(file, cmd, arg, dvb_net_do_ioctl); }
+static int locked_dvb_net_open(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_net *dvbnet = dvbdev->priv; + int ret; + + if (mutex_lock_interruptible(&dvbnet->remove_mutex)) + return -ERESTARTSYS; + + if (dvbnet->exit) { + mutex_unlock(&dvbnet->remove_mutex); + return -ENODEV; + } + + ret = dvb_generic_open(inode, file); + + mutex_unlock(&dvbnet->remove_mutex); + + return ret; +} + static int dvb_net_close(struct inode *inode, struct file *file) { struct dvb_device *dvbdev = file->private_data; struct dvb_net *dvbnet = dvbdev->priv;
+ mutex_lock(&dvbnet->remove_mutex); + dvb_generic_release(inode, file);
- if(dvbdev->users == 1 && dvbnet->exit == 1) + if (dvbdev->users == 1 && dvbnet->exit == 1) { + mutex_unlock(&dvbnet->remove_mutex); wake_up(&dvbdev->wait_queue); + } else { + mutex_unlock(&dvbnet->remove_mutex); + } + return 0; }
@@ -1580,7 +1608,7 @@ static int dvb_net_close(struct inode *inode, struct file *file) static const struct file_operations dvb_net_fops = { .owner = THIS_MODULE, .unlocked_ioctl = dvb_net_ioctl, - .open = dvb_generic_open, + .open = locked_dvb_net_open, .release = dvb_net_close, .llseek = noop_llseek, }; @@ -1599,10 +1627,13 @@ void dvb_net_release (struct dvb_net *dvbnet) { int i;
+ mutex_lock(&dvbnet->remove_mutex); dvbnet->exit = 1; + mutex_unlock(&dvbnet->remove_mutex); + if (dvbnet->dvbdev->users < 1) wait_event(dvbnet->dvbdev->wait_queue, - dvbnet->dvbdev->users==1); + dvbnet->dvbdev->users == 1);
dvb_unregister_device(dvbnet->dvbdev);
@@ -1621,6 +1652,7 @@ int dvb_net_init (struct dvb_adapter *adap, struct dvb_net *dvbnet, int i;
mutex_init(&dvbnet->ioctl_mutex); + mutex_init(&dvbnet->remove_mutex); dvbnet->demux = dmx;
for (i=0; i<DVB_NET_DEVICES_MAX; i++) diff --git a/include/media/dvb_net.h b/include/media/dvb_net.h index 5e31d37f25fac..cc01dffcc9f35 100644 --- a/include/media/dvb_net.h +++ b/include/media/dvb_net.h @@ -41,6 +41,9 @@ * @exit: flag to indicate when the device is being removed. * @demux: pointer to &struct dmx_demux. * @ioctl_mutex: protect access to this struct. + * @remove_mutex: mutex that avoids a race condition between a callback + * called when the hardware is disconnected and the + * file_operations of dvb_net. * * Currently, the core supports up to %DVB_NET_DEVICES_MAX (10) network * devices. @@ -53,6 +56,7 @@ struct dvb_net { unsigned int exit:1; struct dmx_demux *demux; struct mutex ioctl_mutex; + struct mutex remove_mutex; };
/**
From: Takashi Iwai tiwai@suse.de
[ Upstream commit b8c75e4a1b325ea0a9433fa8834be97b5836b946 ]
Using a semaphore in the wait_event*() condition is no good idea. It hits a kernel WARN_ON() at prepare_to_wait_event() like: do not call blocking ops when !TASK_RUNNING; state=1 set at prepare_to_wait_event+0x6d/0x690
For avoiding the potential deadlock, rewrite to an open-coded loop instead. Unlike the loop in wait_event*(), this uses wait_woken() after the condition check, hence the task state stays consistent.
CVE-2023-31084 was assigned to this bug.
Link: https://lore.kernel.org/r/CA+UBctCu7fXn4q41O_3=id1+OdyQ85tZY1x+TkT-6OVBL6KAU...
Link: https://lore.kernel.org/linux-media/20230512151800.1874-1-tiwai@suse.de Reported-by: Yu Hao yhao016@ucr.edu Closes: https://nvd.nist.gov/vuln/detail/CVE-2023-31084 Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/dvb-core/dvb_frontend.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c index b04638321b75b..ad3e42a4eaf73 100644 --- a/drivers/media/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb-core/dvb_frontend.c @@ -292,14 +292,22 @@ static int dvb_frontend_get_event(struct dvb_frontend *fe, }
if (events->eventw == events->eventr) { - int ret; + struct wait_queue_entry wait; + int ret = 0;
if (flags & O_NONBLOCK) return -EWOULDBLOCK;
- ret = wait_event_interruptible(events->wait_queue, - dvb_frontend_test_event(fepriv, events)); - + init_waitqueue_entry(&wait, current); + add_wait_queue(&events->wait_queue, &wait); + while (!dvb_frontend_test_event(fepriv, events)) { + wait_woken(&wait, TASK_INTERRUPTIBLE, 0); + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } + } + remove_wait_queue(&events->wait_queue, &wait); if (ret < 0) return ret; }
From: Hyunwoo Kim v4bel@theori.io
[ Upstream commit 280a8ab81733da8bc442253c700a52c4c0886ffd ]
If the device node of dvb_ca_en50221 is open() and the device is disconnected, a UAF may occur when calling close() on the device node.
The root cause is that wake_up() and wait_event() for dvbdev->wait_queue are not implemented.
So implement wait_event() function in dvb_ca_en50221_release() and add 'remove_mutex' which prevents race condition for 'ca->exit'.
[mchehab: fix a checkpatch warning]
Link: https://lore.kernel.org/linux-media/20221121063308.GA33821@ubuntu Signed-off-by: Hyunwoo Kim v4bel@theori.io Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/dvb-core/dvb_ca_en50221.c | 37 ++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-)
diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c index b1a7b5f8b9aa4..dec036e0336cb 100644 --- a/drivers/media/dvb-core/dvb_ca_en50221.c +++ b/drivers/media/dvb-core/dvb_ca_en50221.c @@ -151,6 +151,12 @@ struct dvb_ca_private {
/* mutex serializing ioctls */ struct mutex ioctl_mutex; + + /* A mutex used when a device is disconnected */ + struct mutex remove_mutex; + + /* Whether the device is disconnected */ + int exit; };
static void dvb_ca_private_free(struct dvb_ca_private *ca) @@ -1708,12 +1714,22 @@ static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
dprintk("%s\n", __func__);
- if (!try_module_get(ca->pub->owner)) + mutex_lock(&ca->remove_mutex); + + if (ca->exit) { + mutex_unlock(&ca->remove_mutex); + return -ENODEV; + } + + if (!try_module_get(ca->pub->owner)) { + mutex_unlock(&ca->remove_mutex); return -EIO; + }
err = dvb_generic_open(inode, file); if (err < 0) { module_put(ca->pub->owner); + mutex_unlock(&ca->remove_mutex); return err; }
@@ -1738,6 +1754,7 @@ static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
dvb_ca_private_get(ca);
+ mutex_unlock(&ca->remove_mutex); return 0; }
@@ -1757,6 +1774,8 @@ static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
dprintk("%s\n", __func__);
+ mutex_lock(&ca->remove_mutex); + /* mark the CA device as closed */ ca->open = 0; dvb_ca_en50221_thread_update_delay(ca); @@ -1767,6 +1786,13 @@ static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
dvb_ca_private_put(ca);
+ if (dvbdev->users == 1 && ca->exit == 1) { + mutex_unlock(&ca->remove_mutex); + wake_up(&dvbdev->wait_queue); + } else { + mutex_unlock(&ca->remove_mutex); + } + return err; }
@@ -1890,6 +1916,7 @@ int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter, }
mutex_init(&ca->ioctl_mutex); + mutex_init(&ca->remove_mutex);
if (signal_pending(current)) { ret = -EINTR; @@ -1932,6 +1959,14 @@ void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca)
dprintk("%s\n", __func__);
+ mutex_lock(&ca->remove_mutex); + ca->exit = 1; + mutex_unlock(&ca->remove_mutex); + + if (ca->dvbdev->users < 1) + wait_event(ca->dvbdev->wait_queue, + ca->dvbdev->users == 1); + /* shutdown the thread if there was one */ kthread_stop(ca->thread);
From: Holger Dengler dengler@linux.ibm.com
[ Upstream commit 844cf829e5f33e00b279230470c8c93b58b8c16f ]
Key blobs for the IOCTLs PKEY_KBLOB2PROTK[23] may contain clear key material. Zeroize the copies of these keys in kernel memory after creating the protected key.
Reviewed-by: Harald Freudenberger freude@linux.ibm.com Signed-off-by: Holger Dengler dengler@linux.ibm.com Signed-off-by: Alexander Gordeev agordeev@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/crypto/pkey_api.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/s390/crypto/pkey_api.c b/drivers/s390/crypto/pkey_api.c index dd84995049b91..870e00effe439 100644 --- a/drivers/s390/crypto/pkey_api.c +++ b/drivers/s390/crypto/pkey_api.c @@ -1271,6 +1271,7 @@ static long pkey_unlocked_ioctl(struct file *filp, unsigned int cmd, return PTR_ERR(kkey); rc = pkey_keyblob2pkey(kkey, ktp.keylen, &ktp.protkey); DEBUG_DBG("%s pkey_keyblob2pkey()=%d\n", __func__, rc); + memzero_explicit(kkey, ktp.keylen); kfree(kkey); if (rc) break; @@ -1404,6 +1405,7 @@ static long pkey_unlocked_ioctl(struct file *filp, unsigned int cmd, kkey, ktp.keylen, &ktp.protkey); DEBUG_DBG("%s pkey_keyblob2pkey2()=%d\n", __func__, rc); kfree(apqns); + memzero_explicit(kkey, ktp.keylen); kfree(kkey); if (rc) break; @@ -1530,6 +1532,7 @@ static long pkey_unlocked_ioctl(struct file *filp, unsigned int cmd, protkey, &protkeylen); DEBUG_DBG("%s pkey_keyblob2pkey3()=%d\n", __func__, rc); kfree(apqns); + memzero_explicit(kkey, ktp.keylen); kfree(kkey); if (rc) { kfree(protkey);
From: Yun Lu luyun@kylinos.cn
[ Upstream commit 20429444e653ee8242dfbf815c0c37866beb371b ]
When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a probability of failure, which shows "authentication with ... timed out". Through debugging, it was found that the RCR register has been inexplicably modified to an incorrect value, resulting in the nic not being able to receive authenticated frames.
To fix this problem, add regrcr in rtl8xxxu_priv struct, and store the RCR value every time the register is written, and use it the next time the register need to be modified.
Signed-off-by: Yun Lu luyun@kylinos.cn Link: https://lore.kernel.org/all/20230427020512.1221062-1-luyun_611@163.com Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/20230512012055.2990472-1-luyun_611@163.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 + drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index 0ed4d67308d78..fe1e4c4c17c42 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1346,6 +1346,7 @@ struct rtl8xxxu_priv { u32 rege9c; u32 regeb4; u32 regebc; + u32 regrcr; int next_mbox; int nr_out_eps;
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index deef1c09de319..004778faf3d07 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -4045,6 +4045,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) RCR_ACCEPT_MGMT_FRAME | RCR_HTC_LOC_CTRL | RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC; rtl8xxxu_write32(priv, REG_RCR, val32); + priv->regrcr = val32;
/* * Accept all multicast @@ -5999,7 +6000,7 @@ static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw, unsigned int *total_flags, u64 multicast) { struct rtl8xxxu_priv *priv = hw->priv; - u32 rcr = rtl8xxxu_read32(priv, REG_RCR); + u32 rcr = priv->regrcr;
dev_dbg(&priv->udev->dev, "%s: changed_flags %08x, total_flags %08x\n", __func__, changed_flags, *total_flags); @@ -6045,6 +6046,7 @@ static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw, */
rtl8xxxu_write32(priv, REG_RCR, rcr); + priv->regrcr = rcr;
*total_flags &= (FIF_ALLMULTI | FIF_FCSFAIL | FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL | FIF_OTHER_BSS | FIF_PSPOLL |
From: Dario Binacchi dario.binacchi@amarulasolutions.com
[ Upstream commit 011644249686f2675e142519cd59e81e04cfc231 ]
Add pin configurations for using CAN controller on stm32f7.
Signed-off-by: Dario Binacchi dario.binacchi@amarulasolutions.com Link: https://lore.kernel.org/all/20230427204540.3126234-4-dario.binacchi@amarulas... Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 82 ++++++++++++++++++++++++++ 1 file changed, 82 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi index fe4cfda72a476..4e1b8b3359e21 100644 --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi @@ -284,6 +284,88 @@ pins2 { slew-rate = <2>; }; }; + + can1_pins_a: can1-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */ + bias-pull-up; + }; + }; + + can1_pins_b: can1-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */ + bias-pull-up; + }; + }; + + can1_pins_c: can1-2 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */ + bias-pull-up; + + }; + }; + + can1_pins_d: can1-3 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */ + bias-pull-up; + + }; + }; + + can2_pins_a: can2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */ + bias-pull-up; + }; + }; + + can2_pins_b: can2-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */ + bias-pull-up; + }; + }; + + can3_pins_a: can3-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 15, AF11)>; /* CAN3_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 8, AF11)>; /* CAN3_RX */ + bias-pull-up; + }; + }; + + can3_pins_b: can3-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 4, AF11)>; /* CAN3_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 3, AF11)>; /* CAN3_RX */ + bias-pull-up; + }; + }; }; }; };
From: Dario Binacchi dario.binacchi@amarulasolutions.com
[ Upstream commit 0920ccdf41e3078a4dd2567eb905ea154bc826e6 ]
Add support for bxcan (Basic eXtended CAN controller) to STM32F746. The chip contains three CAN peripherals, CAN1 and CAN2 in dual peripheral configuration and CAN3 in single peripheral configuration: - Dual CAN peripheral configuration: * CAN1: Primary bxCAN for managing the communication between a secondary bxCAN and the 512-byte SRAM memory. * CAN2: Secondary bxCAN with no direct access to the SRAM memory. This means that the two bxCAN cells share the 512-byte SRAM memory and CAN2 can't be used without enabling CAN1. - Single CAN peripheral configuration: * CAN3: Primary bxCAN with dedicated Memory Access Controller unit and 512-byte SRAM memory.
------------------------------------------------------------------------- | features | CAN1 | CAN2 | CAN 3 | ------------------------------------------------------------------------- | SRAM | 512-byte shared between CAN1 & CAN2 | 512-byte | ------------------------------------------------------------------------- | Filters | 26 filters shared between CAN1 & CAN2 | 14 filters | -------------------------------------------------------------------------
Signed-off-by: Dario Binacchi dario.binacchi@amarulasolutions.com Link: https://lore.kernel.org/all/20230427204540.3126234-6-dario.binacchi@amarulas... Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/stm32f746.dtsi | 47 ++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index d49e481b3aa62..020f83da89294 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -304,6 +304,23 @@ rtc: rtc@40002800 { status = "disabled"; };
+ can3: can@40003400 { + compatible = "st,stm32f4-bxcan"; + reg = <0x40003400 0x200>; + interrupts = <104>, <105>, <106>, <107>; + interrupt-names = "tx", "rx0", "rx1", "sce"; + resets = <&rcc STM32F7_APB1_RESET(CAN3)>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>; + st,gcan = <&gcan3>; + status = "disabled"; + }; + + gcan3: gcan@40003600 { + compatible = "st,stm32f4-gcan", "syscon"; + reg = <0x40003600 0x200>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>; + }; + usart2: serial@40004400 { compatible = "st,stm32f7-uart"; reg = <0x40004400 0x400>; @@ -384,6 +401,36 @@ i2c4: i2c@40006000 { status = "disabled"; };
+ can1: can@40006400 { + compatible = "st,stm32f4-bxcan"; + reg = <0x40006400 0x200>; + interrupts = <19>, <20>, <21>, <22>; + interrupt-names = "tx", "rx0", "rx1", "sce"; + resets = <&rcc STM32F7_APB1_RESET(CAN1)>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>; + st,can-primary; + st,gcan = <&gcan1>; + status = "disabled"; + }; + + gcan1: gcan@40006600 { + compatible = "st,stm32f4-gcan", "syscon"; + reg = <0x40006600 0x200>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>; + }; + + can2: can@40006800 { + compatible = "st,stm32f4-bxcan"; + reg = <0x40006800 0x200>; + interrupts = <63>, <64>, <65>, <66>; + interrupt-names = "tx", "rx0", "rx1", "sce"; + resets = <&rcc STM32F7_APB1_RESET(CAN2)>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN2)>; + st,can-secondary; + st,gcan = <&gcan1>; + status = "disabled"; + }; + cec: cec@40006c00 { compatible = "st,stm32-cec"; reg = <0x40006C00 0x400>;
From: Min-Hua Chen minhuadotchen@gmail.com
[ Upstream commit d91d580878064b880f3574ac35b98d8b70ee8620 ]
This patch fixes several sparse warnings for fault.c:
arch/arm64/mm/fault.c:493:24: sparse: warning: incorrect type in return expression (different base types) arch/arm64/mm/fault.c:493:24: sparse: expected restricted vm_fault_t arch/arm64/mm/fault.c:493:24: sparse: got int arch/arm64/mm/fault.c:501:32: sparse: warning: incorrect type in return expression (different base types) arch/arm64/mm/fault.c:501:32: sparse: expected restricted vm_fault_t arch/arm64/mm/fault.c:501:32: sparse: got int arch/arm64/mm/fault.c:503:32: sparse: warning: incorrect type in return expression (different base types) arch/arm64/mm/fault.c:503:32: sparse: expected restricted vm_fault_t arch/arm64/mm/fault.c:503:32: sparse: got int arch/arm64/mm/fault.c:511:24: sparse: warning: incorrect type in return expression (different base types) arch/arm64/mm/fault.c:511:24: sparse: expected restricted vm_fault_t arch/arm64/mm/fault.c:511:24: sparse: got int arch/arm64/mm/fault.c:670:13: sparse: warning: restricted vm_fault_t degrades to integer arch/arm64/mm/fault.c:670:13: sparse: warning: restricted vm_fault_t degrades to integer arch/arm64/mm/fault.c:713:39: sparse: warning: restricted vm_fault_t degrades to integer
Reported-by: kernel test robot lkp@intel.com Signed-off-by: Min-Hua Chen minhuadotchen@gmail.com Link: https://lore.kernel.org/r/20230502151909.128810-1-minhuadotchen@gmail.com Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/mm/fault.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 2be856731e817..d8baedd160de0 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -402,8 +402,8 @@ static void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *re } }
-#define VM_FAULT_BADMAP 0x010000 -#define VM_FAULT_BADACCESS 0x020000 +#define VM_FAULT_BADMAP ((__force vm_fault_t)0x010000) +#define VM_FAULT_BADACCESS ((__force vm_fault_t)0x020000)
static vm_fault_t __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int mm_flags, unsigned long vm_flags,
From: Wenchao Hao haowenchao2@huawei.com
[ Upstream commit 09e797c8641f6ad435c33ae24c223351197ea29a ]
If scsi_dispatch_cmd() failed, the SCSI command was not sent to the target, scsi_queue_rq() would return BLK_STS_RESOURCE and the related request would be requeued. The timeout of this request would not fire, no one would increase iodone_cnt.
The above flow would result the iodone_cnt smaller than iorequest_cnt. So decrease the iorequest_cnt if dispatch failed to workaround the issue.
Signed-off-by: Wenchao Hao haowenchao2@huawei.com Reported-by: Ming Lei ming.lei@redhat.com Closes: https://lore.kernel.org/r/ZF+zB+bB7iqe0wGd@ovpn-8-17.pek2.redhat.com Link: https://lore.kernel.org/r/20230515070156.1790181-3-haowenchao2@huawei.com Reviewed-by: Ming Lei ming.lei@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/scsi_lib.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 6f3d29d16d1f4..99b90031500b2 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1490,6 +1490,7 @@ static int scsi_dispatch_cmd(struct scsi_cmnd *cmd) */ SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd, "queuecommand : device blocked\n")); + atomic_dec(&cmd->device->iorequest_cnt); return SCSI_MLQUEUE_DEVICE_BUSY; }
@@ -1522,6 +1523,7 @@ static int scsi_dispatch_cmd(struct scsi_cmnd *cmd) trace_scsi_dispatch_cmd_start(cmd); rtn = host->hostt->queuecommand(host, cmd); if (rtn) { + atomic_dec(&cmd->device->iorequest_cnt); trace_scsi_dispatch_cmd_error(cmd, rtn); if (rtn != SCSI_MLQUEUE_DEVICE_BUSY && rtn != SCSI_MLQUEUE_TARGET_BUSY)
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit 212457ccbd60dba34f965e4ffbe62f0e4f970538 ]
clang warns about an unpacked structure inside of a packed one:
drivers/net/wireless/broadcom/b43/b43.h:654:4: error: field data within 'struct b43_iv' is less aligned than 'union (unnamed union at /home/arnd/arm-soc/drivers/net/wireless/broadcom/b43/b43.h:651:2)' and is usually due to 'struct b43_iv' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
The problem here is that the anonymous union has the default alignment from its members, apparently because the original author mixed up the placement of the __packed attribute by placing it next to the struct member rather than the union definition. As the struct itself is also marked as __packed, there is no need to mark its members, so just move the annotation to the inner type instead.
As Michael noted, the same problem is present in b43legacy, so change both at the same time.
Acked-by: Michael Büsch m@bues.ch Reported-by: kernel test robot lkp@intel.com Reviewed-by: Simon Horman simon.horman@corigine.com Tested-by: Larry Finger Larry.Finger@lwfinger.net Link: https://lore.kernel.org/oe-kbuild-all/202305160749.ay1HAoyP-lkp@intel.com/ Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/20230516183442.536589-1-arnd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/broadcom/b43/b43.h | 2 +- drivers/net/wireless/broadcom/b43legacy/b43legacy.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/b43/b43.h b/drivers/net/wireless/broadcom/b43/b43.h index 9fc7c088a539e..67b4bac048e58 100644 --- a/drivers/net/wireless/broadcom/b43/b43.h +++ b/drivers/net/wireless/broadcom/b43/b43.h @@ -651,7 +651,7 @@ struct b43_iv { union { __be16 d16; __be32 d32; - } data __packed; + } __packed data; } __packed;
diff --git a/drivers/net/wireless/broadcom/b43legacy/b43legacy.h b/drivers/net/wireless/broadcom/b43legacy/b43legacy.h index 6b0cec467938f..f49365d14619f 100644 --- a/drivers/net/wireless/broadcom/b43legacy/b43legacy.h +++ b/drivers/net/wireless/broadcom/b43legacy/b43legacy.h @@ -379,7 +379,7 @@ struct b43legacy_iv { union { __be16 d16; __be32 d32; - } data __packed; + } __packed data; } __packed;
#define B43legacy_PHYMODE(phytype) (1 << (phytype))
From: Tom Rix trix@redhat.com
[ Upstream commit 224a876e37543eee111bf9b6aa4935080e619335 ]
gcc with W=1 and ! CONFIG_NF_NAT net/netfilter/nf_conntrack_netlink.c:3463:32: error: ‘exp_nat_nla_policy’ defined but not used [-Werror=unused-const-variable=] 3463 | static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = { | ^~~~~~~~~~~~~~~~~~ net/netfilter/nf_conntrack_netlink.c:2979:33: error: ‘any_addr’ defined but not used [-Werror=unused-const-variable=] 2979 | static const union nf_inet_addr any_addr; | ^~~~~~~~
These variables use is controlled by CONFIG_NF_NAT, so should their definitions.
Signed-off-by: Tom Rix trix@redhat.com Reviewed-by: Simon Horman simon.horman@corigine.com Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_conntrack_netlink.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index c9ca857f1068d..27d3e54666b90 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -2976,7 +2976,9 @@ static int ctnetlink_exp_dump_mask(struct sk_buff *skb, return -1; }
+#if IS_ENABLED(CONFIG_NF_NAT) static const union nf_inet_addr any_addr; +#endif
static __be32 nf_expect_get_id(const struct nf_conntrack_expect *exp) { @@ -3466,10 +3468,12 @@ ctnetlink_change_expect(struct nf_conntrack_expect *x, return 0; }
+#if IS_ENABLED(CONFIG_NF_NAT) static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = { [CTA_EXPECT_NAT_DIR] = { .type = NLA_U32 }, [CTA_EXPECT_NAT_TUPLE] = { .type = NLA_NESTED }, }; +#endif
static int ctnetlink_parse_expect_nat(const struct nlattr *attr,
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit 040b5a046a9e18098580d3ccd029e2318fca7859 ]
Two functions are defined and used in pcm_oss.c but also optionally used from io.c, with an optional prototype. If CONFIG_SND_PCM_OSS_PLUGINS is disabled, this causes a warning as the functions are not static and have no prototype:
sound/core/oss/pcm_oss.c:1235:19: error: no previous prototype for 'snd_pcm_oss_write3' [-Werror=missing-prototypes] sound/core/oss/pcm_oss.c:1266:19: error: no previous prototype for 'snd_pcm_oss_read3' [-Werror=missing-prototypes]
Avoid this by making the prototypes unconditional.
Signed-off-by: Arnd Bergmann arnd@arndb.de Link: https://lore.kernel.org/r/20230516195046.550584-2-arnd@kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/core/oss/pcm_plugin.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/sound/core/oss/pcm_plugin.h b/sound/core/oss/pcm_plugin.h index 46e273bd4a786..50a6b50f5db4c 100644 --- a/sound/core/oss/pcm_plugin.h +++ b/sound/core/oss/pcm_plugin.h @@ -141,6 +141,14 @@ int snd_pcm_area_copy(const struct snd_pcm_channel_area *src_channel,
void *snd_pcm_plug_buf_alloc(struct snd_pcm_substream *plug, snd_pcm_uframes_t size); void snd_pcm_plug_buf_unlock(struct snd_pcm_substream *plug, void *ptr); +#else + +static inline snd_pcm_sframes_t snd_pcm_plug_client_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t drv_size) { return drv_size; } +static inline snd_pcm_sframes_t snd_pcm_plug_slave_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t clt_size) { return clt_size; } +static inline int snd_pcm_plug_slave_format(int format, const struct snd_mask *format_mask) { return format; } + +#endif + snd_pcm_sframes_t snd_pcm_oss_write3(struct snd_pcm_substream *substream, const char *ptr, snd_pcm_uframes_t size, int in_kernel); @@ -151,14 +159,6 @@ snd_pcm_sframes_t snd_pcm_oss_writev3(struct snd_pcm_substream *substream, snd_pcm_sframes_t snd_pcm_oss_readv3(struct snd_pcm_substream *substream, void **bufs, snd_pcm_uframes_t frames);
-#else - -static inline snd_pcm_sframes_t snd_pcm_plug_client_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t drv_size) { return drv_size; } -static inline snd_pcm_sframes_t snd_pcm_plug_slave_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t clt_size) { return clt_size; } -static inline int snd_pcm_plug_slave_format(int format, const struct snd_mask *format_mask) { return format; } - -#endif - #ifdef PLUGIN_DEBUG #define pdprintf(fmt, args...) printk(KERN_DEBUG "plugin: " fmt, ##args) #else
From: Rob Clark robdclark@chromium.org
[ Upstream commit 5c054db54c43a5fcb5cc81012361f5e3fac37637 ]
Otherwise it is not always obvious if a dt or iommu change is causing us to fall back to global pgtable.
Signed-off-by: Rob Clark robdclark@chromium.org Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Patchwork: https://patchwork.freedesktop.org/patch/537359/ Link: https://lore.kernel.org/r/20230516222039.907690-2-robdclark@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/msm_iommu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/msm_iommu.c b/drivers/gpu/drm/msm/msm_iommu.c index ecab6287c1c39..b81390d6ebd38 100644 --- a/drivers/gpu/drm/msm/msm_iommu.c +++ b/drivers/gpu/drm/msm/msm_iommu.c @@ -155,7 +155,12 @@ struct msm_mmu *msm_iommu_pagetable_create(struct msm_mmu *parent) /* Get the pagetable configuration from the domain */ if (adreno_smmu->cookie) ttbr1_cfg = adreno_smmu->get_ttbr1_cfg(adreno_smmu->cookie); - if (!ttbr1_cfg) + + /* + * If you hit this WARN_ONCE() you are probably missing an entry in + * qcom_smmu_impl_of_match[] in arm-smmu-qcom.c + */ + if (WARN_ONCE(!ttbr1_cfg, "No per-process page tables")) return ERR_PTR(-ENODEV);
pagetable = kzalloc(sizeof(*pagetable), GFP_KERNEL);
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit fb1b7be9b16c1f4626969ba4e95a97da2a452b41 ]
When CONFIG_PROC_FS is disabled, the function declarations for some procfs functions are hidden, but the definitions are still build, as shown by this compiler warning:
net/atm/resources.c:403:7: error: no previous prototype for 'atm_dev_seq_start' [-Werror=missing-prototypes] net/atm/resources.c:409:6: error: no previous prototype for 'atm_dev_seq_stop' [-Werror=missing-prototypes] net/atm/resources.c:414:7: error: no previous prototype for 'atm_dev_seq_next' [-Werror=missing-prototypes]
Add another #ifdef to leave these out of the build.
Signed-off-by: Arnd Bergmann arnd@arndb.de Link: https://lore.kernel.org/r/20230516194625.549249-2-arnd@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/atm/resources.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/net/atm/resources.c b/net/atm/resources.c index 53236986dfe09..3ad39ae971323 100644 --- a/net/atm/resources.c +++ b/net/atm/resources.c @@ -403,6 +403,7 @@ int atm_dev_ioctl(unsigned int cmd, void __user *buf, int __user *sioc_len, return error; }
+#ifdef CONFIG_PROC_FS void *atm_dev_seq_start(struct seq_file *seq, loff_t *pos) { mutex_lock(&atm_dev_mutex); @@ -418,3 +419,4 @@ void *atm_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos) { return seq_list_next(v, &atm_devs, pos); } +#endif
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit 2e9f8ab68f42b059e80db71266c1675c07c664bd ]
mdio_bus_init() is either used as a local module_init() entry, or it gets called in phy_device.c. In the former case, there is no declaration, which causes a warning:
drivers/net/phy/mdio_bus.c:1371:12: error: no previous prototype for 'mdio_bus_init' [-Werror=missing-prototypes]
Remove the #ifdef around the declaration to avoid the warning..
Signed-off-by: Arnd Bergmann arnd@arndb.de Link: https://lore.kernel.org/r/20230516194625.549249-4-arnd@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/phy.h | 2 -- 1 file changed, 2 deletions(-)
diff --git a/include/linux/phy.h b/include/linux/phy.h index 08725a262f320..273a9409c77d6 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1604,10 +1604,8 @@ void phy_package_leave(struct phy_device *phydev); int devm_phy_package_join(struct device *dev, struct phy_device *phydev, int addr, size_t priv_size);
-#if IS_ENABLED(CONFIG_PHYLIB) int __init mdio_bus_init(void); void mdio_bus_exit(void); -#endif
int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data); int phy_ethtool_get_sset_count(struct phy_device *phydev);
linux-stable-mirror@lists.linaro.org
-
Sasha Levin