Commit 663abb1a7a7f ("tty: serial: qcom_geni_serial: Fix UART hang") addressed an issue with stalled tx after the console code interrupted the last bytes of a tx command by reenabling the watermark interrupt if there is data in write buffer. This can however break software flow control by re-enabling tx after the user has stopped it.

Address the original issue by not clearing the CMD_DONE flag after polling for command completion. This allows the interrupt handler to start another transfer when the CMD_DONE interrupt has not been disabled due to flow control.

Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP") Fixes: 663abb1a7a7f ("tty: serial: qcom_geni_serial: Fix UART hang") Cc: stable@vger.kernel.org # 4.17 Signed-off-by: Johan Hovold johan+linaro@kernel.org --- drivers/tty/serial/qcom_geni_serial.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index e1926124339d..0af4a93c0af5 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -314,18 +314,16 @@ static void qcom_geni_serial_setup_tx(struct uart_port *uport, u32 xmit_size) static void qcom_geni_serial_poll_tx_done(struct uart_port *uport) { int done; - u32 irq_clear = M_CMD_DONE_EN;

done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, M_CMD_DONE_EN, true); if (!done) { writel(M_GENI_CMD_ABORT, uport->membase + SE_GENI_M_CMD_CTRL_REG); - irq_clear |= M_CMD_ABORT_EN; qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, M_CMD_ABORT_EN, true); + writel(M_CMD_ABORT_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); } - writel(irq_clear, uport->membase + SE_GENI_M_IRQ_CLEAR); }

static void qcom_geni_serial_abort_rx(struct uart_port *uport) @@ -386,6 +384,7 @@ static void qcom_geni_serial_poll_put_char(struct uart_port *uport, unsigned char c) { writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG); + writel(M_CMD_DONE_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); qcom_geni_serial_setup_tx(uport, 1); WARN_ON(!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, M_TX_FIFO_WATERMARK_EN, true)); @@ -430,6 +429,7 @@ __qcom_geni_serial_console_write(struct uart_port *uport, const char *s, }

writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG); + writel(M_CMD_DONE_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); qcom_geni_serial_setup_tx(uport, bytes_to_send); for (i = 0; i < count; ) { size_t chars_to_write = 0; @@ -471,7 +471,6 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s, bool locked = true; unsigned long flags; u32 geni_status; - u32 irq_en;

WARN_ON(co->index < 0 || co->index >= GENI_UART_CONS_PORTS);

@@ -503,12 +502,6 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s, * has been sent, in which case we need to look for done first. */ qcom_geni_serial_poll_tx_done(uport); - - if (!kfifo_is_empty(&uport->state->port.xmit_fifo)) { - irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); - writel(irq_en | M_TX_FIFO_WATERMARK_EN, - uport->membase + SE_GENI_M_IRQ_EN); - } }

__qcom_geni_serial_console_write(uport, s, count);