From: Nicholas Piggin npiggin@gmail.com

commit bdcb1aefc5b3f7d0f1dc8b02673602bca2ff7a4b upstream.

The fallback RFI flush is used when firmware does not provide a way to flush the cache. It's a "displacement flush" that evicts useful data by displacing it with an uninteresting buffer.

The flush has to take care to work with implementation specific cache replacment policies, so the recipe has been in flux. The initial slow but conservative approach is to touch all lines of a congruence class, with dependencies between each load. It has since been determined that a linear pattern of loads without dependencies is sufficient, and is significantly faster.

Measuring the speed of a null syscall with RFI fallback flush enabled gives the relative improvement:

P8 - 1.83x P9 - 1.75x

The flush also becomes simpler and more adaptable to different cache geometries.

Signed-off-by: Nicholas Piggin npiggin@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au --- arch/powerpc/include/asm/paca.h | 3 +- arch/powerpc/kernel/asm-offsets.c | 3 +- arch/powerpc/kernel/exceptions-64s.S | 76 +++++++++++++++++------------------- arch/powerpc/kernel/setup_64.c | 13 +----- arch/powerpc/xmon/xmon.c | 2 + 5 files changed, 41 insertions(+), 56 deletions(-)

diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index b8366df50d19..e6bd59353e40 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -238,8 +238,7 @@ struct paca_struct { */ u64 exrfi[EX_SIZE] __aligned(0x80); void *rfi_flush_fallback_area; - u64 l1d_flush_congruence; - u64 l1d_flush_sets; + u64 l1d_flush_size; #endif };

diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 748cdc4bb89a..2e5ea300258a 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -239,8 +239,7 @@ int main(void) OFFSET(PACA_IN_NMI, paca_struct, in_nmi); OFFSET(PACA_RFI_FLUSH_FALLBACK_AREA, paca_struct, rfi_flush_fallback_area); OFFSET(PACA_EXRFI, paca_struct, exrfi); - OFFSET(PACA_L1D_FLUSH_CONGRUENCE, paca_struct, l1d_flush_congruence); - OFFSET(PACA_L1D_FLUSH_SETS, paca_struct, l1d_flush_sets); + OFFSET(PACA_L1D_FLUSH_SIZE, paca_struct, l1d_flush_size);

#endif OFFSET(PACAHWCPUID, paca_struct, hw_cpu_id); diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index f9ca4bb3d48e..feba0a8d040e 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -1440,39 +1440,37 @@ TRAMP_REAL_BEGIN(rfi_flush_fallback) std r9,PACA_EXRFI+EX_R9(r13) std r10,PACA_EXRFI+EX_R10(r13) std r11,PACA_EXRFI+EX_R11(r13) - std r12,PACA_EXRFI+EX_R12(r13) - std r8,PACA_EXRFI+EX_R13(r13) mfctr r9 ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13) - ld r11,PACA_L1D_FLUSH_SETS(r13) - ld r12,PACA_L1D_FLUSH_CONGRUENCE(r13) - /* - * The load adresses are at staggered offsets within cachelines, - * which suits some pipelines better (on others it should not - * hurt). - */ - addi r12,r12,8 + ld r11,PACA_L1D_FLUSH_SIZE(r13) + srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */ mtctr r11 DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */

/* order ld/st prior to dcbt stop all streams with flushing */ sync -1: li r8,0 - .rept 8 /* 8-way set associative */ - ldx r11,r10,r8 - add r8,r8,r12 - xor r11,r11,r11 // Ensure r11 is 0 even if fallback area is not - add r8,r8,r11 // Add 0, this creates a dependency on the ldx - .endr - addi r10,r10,128 /* 128 byte cache line */ + + /* + * The load adresses are at staggered offsets within cachelines, + * which suits some pipelines better (on others it should not + * hurt). + */ +1: + ld r11,(0x80 + 8)*0(r10) + ld r11,(0x80 + 8)*1(r10) + ld r11,(0x80 + 8)*2(r10) + ld r11,(0x80 + 8)*3(r10) + ld r11,(0x80 + 8)*4(r10) + ld r11,(0x80 + 8)*5(r10) + ld r11,(0x80 + 8)*6(r10) + ld r11,(0x80 + 8)*7(r10) + addi r10,r10,0x80*8 bdnz 1b

mtctr r9 ld r9,PACA_EXRFI+EX_R9(r13) ld r10,PACA_EXRFI+EX_R10(r13) ld r11,PACA_EXRFI+EX_R11(r13) - ld r12,PACA_EXRFI+EX_R12(r13) - ld r8,PACA_EXRFI+EX_R13(r13) GET_SCRATCH0(r13); rfid

@@ -1482,39 +1480,37 @@ TRAMP_REAL_BEGIN(hrfi_flush_fallback) std r9,PACA_EXRFI+EX_R9(r13) std r10,PACA_EXRFI+EX_R10(r13) std r11,PACA_EXRFI+EX_R11(r13) - std r12,PACA_EXRFI+EX_R12(r13) - std r8,PACA_EXRFI+EX_R13(r13) mfctr r9 ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13) - ld r11,PACA_L1D_FLUSH_SETS(r13) - ld r12,PACA_L1D_FLUSH_CONGRUENCE(r13) - /* - * The load adresses are at staggered offsets within cachelines, - * which suits some pipelines better (on others it should not - * hurt). - */ - addi r12,r12,8 + ld r11,PACA_L1D_FLUSH_SIZE(r13) + srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */ mtctr r11 DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */

/* order ld/st prior to dcbt stop all streams with flushing */ sync -1: li r8,0 - .rept 8 /* 8-way set associative */ - ldx r11,r10,r8 - add r8,r8,r12 - xor r11,r11,r11 // Ensure r11 is 0 even if fallback area is not - add r8,r8,r11 // Add 0, this creates a dependency on the ldx - .endr - addi r10,r10,128 /* 128 byte cache line */ + + /* + * The load adresses are at staggered offsets within cachelines, + * which suits some pipelines better (on others it should not + * hurt). + */ +1: + ld r11,(0x80 + 8)*0(r10) + ld r11,(0x80 + 8)*1(r10) + ld r11,(0x80 + 8)*2(r10) + ld r11,(0x80 + 8)*3(r10) + ld r11,(0x80 + 8)*4(r10) + ld r11,(0x80 + 8)*5(r10) + ld r11,(0x80 + 8)*6(r10) + ld r11,(0x80 + 8)*7(r10) + addi r10,r10,0x80*8 bdnz 1b

mtctr r9 ld r9,PACA_EXRFI+EX_R9(r13) ld r10,PACA_EXRFI+EX_R10(r13) ld r11,PACA_EXRFI+EX_R11(r13) - ld r12,PACA_EXRFI+EX_R12(r13) - ld r8,PACA_EXRFI+EX_R13(r13) GET_SCRATCH0(r13); hrfid

diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 9527a4c6cbc2..333c64a794eb 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -851,19 +851,8 @@ static void init_fallback_flush(void) memset(l1d_flush_fallback_area, 0, l1d_size * 2);

for_each_possible_cpu(cpu) { - /* - * The fallback flush is currently coded for 8-way - * associativity. Different associativity is possible, but it - * will be treated as 8-way and may not evict the lines as - * effectively. - * - * 128 byte lines are mandatory. - */ - u64 c = l1d_size / 8; - paca[cpu].rfi_flush_fallback_area = l1d_flush_fallback_area; - paca[cpu].l1d_flush_congruence = c; - paca[cpu].l1d_flush_sets = c / 128; + paca[cpu].l1d_flush_size = l1d_size; } }

diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 2c8b325591cc..a5938fadd031 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2348,6 +2348,8 @@ static void dump_one_paca(int cpu) DUMP(p, slb_cache_ptr, "x"); for (i = 0; i < SLB_CACHE_ENTRIES; i++) printf(" slb_cache[%d]: = 0x%016lx\n", i, p->slb_cache[i]); + + DUMP(p, rfi_flush_fallback_area, "px"); #endif DUMP(p, dscr_default, "llx"); #ifdef CONFIG_PPC_BOOK3E

commit eb0a2d2620ae431c543963c8c7f08f597366fc60 upstream.

Some versions of firmware will have a setting that can be configured to disable the RFI flush, add support for it.

Fixes: 6e032b350cd1 ("powerpc/powernv: Check device-tree for RFI flush settings") Signed-off-by: Michael Ellerman mpe@ellerman.id.au --- arch/powerpc/platforms/powernv/setup.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 7966a314d93a..37a7f5ef00b7 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -79,6 +79,10 @@ static void pnv_setup_rfi_flush(void) if (np && of_property_read_bool(np, "disabled")) enable--;

+ np = of_get_child_by_name(fw_features, "speculation-policy-favor-security"); + if (np && of_property_read_bool(np, "disabled")) + enable = 0; + of_node_put(np); of_node_put(fw_features); }

commit abf110f3e1cea40f5ea15e85f5d67c39c14568a7 upstream.

For PowerVM migration we want to be able to call setup_rfi_flush() again after we've migrated the partition.

To support that we need to check that we're not trying to allocate the fallback flush area after memblock has gone away (i.e., boot-time only).

Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Mauricio Faria de Oliveira mauricfo@linux.vnet.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au --- arch/powerpc/include/asm/setup.h | 2 +- arch/powerpc/kernel/setup_64.c | 6 +++++- 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h index 469b7fdc9be4..bbcdf929be54 100644 --- a/arch/powerpc/include/asm/setup.h +++ b/arch/powerpc/include/asm/setup.h @@ -49,7 +49,7 @@ enum l1d_flush_type { L1D_FLUSH_MTTRIG = 0x8, };

-void __init setup_rfi_flush(enum l1d_flush_type, bool enable); +void setup_rfi_flush(enum l1d_flush_type, bool enable); void do_rfi_flush_fixups(enum l1d_flush_type types);

#endif /* !__ASSEMBLY__ */ diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index cbb3fb1820ce..ace6a10a242f 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -836,6 +836,10 @@ static void init_fallback_flush(void) u64 l1d_size, limit; int cpu;

+ /* Only allocate the fallback flush area once (at boot time). */ + if (l1d_flush_fallback_area) + return; + l1d_size = ppc64_caches.l1d.size; limit = min(safe_stack_limit(), ppc64_rma_size);

@@ -853,7 +857,7 @@ static void init_fallback_flush(void) } }

-void __init setup_rfi_flush(enum l1d_flush_type types, bool enable) +void setup_rfi_flush(enum l1d_flush_type types, bool enable) { if (types & L1D_FLUSH_FALLBACK) { pr_info("rfi-flush: Using fallback displacement flush\n");

From: Mauricio Faria de Oliveira mauricfo@linux.vnet.ibm.com

commit 0063d61ccfc011f379a31acaeba6de7c926fed2c upstream.

Currently the rfi-flush messages print 'Using <type> flush' for all enabled_flush_types, but that is not necessarily true -- as now the fallback flush is always enabled on pseries, but the fixup function overwrites its nop/branch slot with other flush types, if available.

So, replace the 'Using <type> flush' messages with '<type> flush is available'.

Also, print the patched flush types in the fixup function, so users can know what is (not) being used (e.g., the slower, fallback flush, or no flush type at all if flush is disabled via the debugfs switch).

Suggested-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Mauricio Faria de Oliveira mauricfo@linux.vnet.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au --- arch/powerpc/kernel/setup_64.c | 6 +++--- arch/powerpc/lib/feature-fixups.c | 9 ++++++++- 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index ace6a10a242f..da12b54cbe5c 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -860,15 +860,15 @@ static void init_fallback_flush(void) void setup_rfi_flush(enum l1d_flush_type types, bool enable) { if (types & L1D_FLUSH_FALLBACK) { - pr_info("rfi-flush: Using fallback displacement flush\n"); + pr_info("rfi-flush: fallback displacement flush available\n"); init_fallback_flush(); }

if (types & L1D_FLUSH_ORI) - pr_info("rfi-flush: Using ori type flush\n"); + pr_info("rfi-flush: ori type flush available\n");

if (types & L1D_FLUSH_MTTRIG) - pr_info("rfi-flush: Using mttrig type flush\n"); + pr_info("rfi-flush: mttrig type flush available\n");

enabled_flush_types = types;

diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c index d0c0b8443dcf..8ac72f7d638f 100644 --- a/arch/powerpc/lib/feature-fixups.c +++ b/arch/powerpc/lib/feature-fixups.c @@ -153,7 +153,14 @@ void do_rfi_flush_fixups(enum l1d_flush_type types) patch_instruction(dest + 2, instrs[2]); }

- printk(KERN_DEBUG "rfi-flush: patched %d locations\n", i); + printk(KERN_DEBUG "rfi-flush: patched %d locations (%s flush)\n", i, + (types == L1D_FLUSH_NONE) ? "no" : + (types == L1D_FLUSH_FALLBACK) ? "fallback displacement" : + (types & L1D_FLUSH_ORI) ? (types & L1D_FLUSH_MTTRIG) + ? "ori+mttrig type" + : "ori type" : + (types & L1D_FLUSH_MTTRIG) ? "mttrig type" + : "unknown"); } #endif /* CONFIG_PPC_BOOK3S_64 */

commit c4bc36628d7f8b664657d8bd6ad1c44c177880b7 upstream.

Add some additional values which have been defined for the H_GET_CPU_CHARACTERISTICS hypercall.

Signed-off-by: Michael Ellerman mpe@ellerman.id.au --- arch/powerpc/include/asm/hvcall.h | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index eca3f9c68907..5a740feb7bd7 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -337,6 +337,9 @@ #define H_CPU_CHAR_L1D_FLUSH_ORI30 (1ull << 61) // IBM bit 2 #define H_CPU_CHAR_L1D_FLUSH_TRIG2 (1ull << 60) // IBM bit 3 #define H_CPU_CHAR_L1D_THREAD_PRIV (1ull << 59) // IBM bit 4 +#define H_CPU_CHAR_BRANCH_HINTS_HONORED (1ull << 58) // IBM bit 5 +#define H_CPU_CHAR_THREAD_RECONFIG_CTRL (1ull << 57) // IBM bit 6 +#define H_CPU_CHAR_COUNT_CACHE_DISABLED (1ull << 56) // IBM bit 7

#define H_CPU_BEHAV_FAVOUR_SECURITY (1ull << 63) // IBM bit 0 #define H_CPU_BEHAV_L1D_FLUSH_PR (1ull << 62) // IBM bit 1

commit f636c14790ead6cc22cf62279b1f8d7e11a67116 upstream.

Now that we have feature flags for security related things, set or clear them based on what we receive from the hypercall.

Signed-off-by: Michael Ellerman mpe@ellerman.id.au --- arch/powerpc/platforms/pseries/setup.c | 43 ++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index b2d99b384089..65b157a35161 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -68,6 +68,7 @@ #include <asm/plpar_wrappers.h> #include <asm/kexec.h> #include <asm/isa-bridge.h> +#include <asm/security_features.h>

#include "pseries.h"

@@ -459,6 +460,40 @@ static void __init find_and_init_phbs(void) of_pci_check_probe_only(); }

+static void init_cpu_char_feature_flags(struct h_cpu_char_result *result) +{ + if (result->character & H_CPU_CHAR_SPEC_BAR_ORI31) + security_ftr_set(SEC_FTR_SPEC_BAR_ORI31); + + if (result->character & H_CPU_CHAR_BCCTRL_SERIALISED) + security_ftr_set(SEC_FTR_BCCTRL_SERIALISED); + + if (result->character & H_CPU_CHAR_L1D_FLUSH_ORI30) + security_ftr_set(SEC_FTR_L1D_FLUSH_ORI30); + + if (result->character & H_CPU_CHAR_L1D_FLUSH_TRIG2) + security_ftr_set(SEC_FTR_L1D_FLUSH_TRIG2); + + if (result->character & H_CPU_CHAR_L1D_THREAD_PRIV) + security_ftr_set(SEC_FTR_L1D_THREAD_PRIV); + + if (result->character & H_CPU_CHAR_COUNT_CACHE_DISABLED) + security_ftr_set(SEC_FTR_COUNT_CACHE_DISABLED); + + /* + * The features below are enabled by default, so we instead look to see + * if firmware has *disabled* them, and clear them if so. + */ + if (!(result->character & H_CPU_BEHAV_FAVOUR_SECURITY)) + security_ftr_clear(SEC_FTR_FAVOUR_SECURITY); + + if (!(result->character & H_CPU_BEHAV_L1D_FLUSH_PR)) + security_ftr_clear(SEC_FTR_L1D_FLUSH_PR); + + if (!(result->character & H_CPU_BEHAV_BNDS_CHK_SPEC_BAR)) + security_ftr_clear(SEC_FTR_BNDS_CHK_SPEC_BAR); +} + void pseries_setup_rfi_flush(void) { struct h_cpu_char_result result; @@ -472,6 +507,8 @@ void pseries_setup_rfi_flush(void)

rc = plpar_get_cpu_characteristics(&result); if (rc == H_SUCCESS) { + init_cpu_char_feature_flags(&result); + if (result.character & H_CPU_CHAR_L1D_FLUSH_TRIG2) types |= L1D_FLUSH_MTTRIG; if (result.character & H_CPU_CHAR_L1D_FLUSH_ORI30) @@ -482,6 +519,12 @@ void pseries_setup_rfi_flush(void) enable = false; }

+ /* + * We're the guest so this doesn't apply to us, clear it to simplify + * handling of it elsewhere. + */ + security_ftr_clear(SEC_FTR_L1D_FLUSH_HV); + setup_rfi_flush(types, enable); }

commit 8ad33041563a10b34988800c682ada14b2612533 upstream.

This landed in setup_64.c for no good reason other than we had nowhere else to put it. Now that we have a security-related file, that is a better place for it so move it.

Signed-off-by: Michael Ellerman mpe@ellerman.id.au --- arch/powerpc/kernel/security.c | 11 +++++++++++ arch/powerpc/kernel/setup_64.c | 8 -------- 2 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c index 4ccba00d224c..564e7f182a16 100644 --- a/arch/powerpc/kernel/security.c +++ b/arch/powerpc/kernel/security.c @@ -5,6 +5,8 @@ // Copyright 2018, Michael Ellerman, IBM Corporation.

#include <linux/kernel.h> +#include <linux/device.h> + #include <asm/security_features.h>

@@ -13,3 +15,12 @@ unsigned long powerpc_security_features __read_mostly = \ SEC_FTR_L1D_FLUSH_PR | \ SEC_FTR_BNDS_CHK_SPEC_BAR | \ SEC_FTR_FAVOUR_SECURITY; + + +ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, char *buf) +{ + if (rfi_flush) + return sprintf(buf, "Mitigation: RFI Flush\n"); + + return sprintf(buf, "Vulnerable\n"); +} diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index da12b54cbe5c..1146174f45c5 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -910,12 +910,4 @@ static __init int rfi_flush_debugfs_init(void) } device_initcall(rfi_flush_debugfs_init); #endif - -ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, char *buf) -{ - if (rfi_flush) - return sprintf(buf, "Mitigation: RFI Flush\n"); - - return sprintf(buf, "Vulnerable\n"); -} #endif /* CONFIG_PPC_BOOK3S_64 */

commit 37c0bdd00d3ae83369ab60a6712c28e11e6458d5 upstream.

Now that we have the security flags we can significantly simplify the code in pnv_setup_rfi_flush(), because we can use the flags instead of checking device tree properties and because the security flags have pessimistic defaults.

Signed-off-by: Michael Ellerman mpe@ellerman.id.au --- arch/powerpc/platforms/powernv/setup.c | 41 +++++++++------------------------- 1 file changed, 10 insertions(+), 31 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 4b7f2c00f870..14a24c63e6b0 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -65,7 +65,7 @@ static void init_fw_feat_flags(struct device_node *np) if (fw_feature_is("enabled", "fw-bcctrl-serialized", np)) security_ftr_set(SEC_FTR_BCCTRL_SERIALISED);

- if (fw_feature_is("enabled", "inst-spec-barrier-ori31,31,0", np)) + if (fw_feature_is("enabled", "inst-l1d-flush-ori30,30,0", np)) security_ftr_set(SEC_FTR_L1D_FLUSH_ORI30);

if (fw_feature_is("enabled", "inst-l1d-flush-trig2", np)) @@ -98,11 +98,10 @@ static void pnv_setup_rfi_flush(void) { struct device_node *np, *fw_features; enum l1d_flush_type type; - int enable; + bool enable;

/* Default to fallback in case fw-features are not available */ type = L1D_FLUSH_FALLBACK; - enable = 1;

np = of_find_node_by_name(NULL, "ibm,opal"); fw_features = of_get_child_by_name(np, "fw-features"); @@ -110,40 +109,20 @@ static void pnv_setup_rfi_flush(void)

if (fw_features) { init_fw_feat_flags(fw_features); + of_node_put(fw_features);

- np = of_get_child_by_name(fw_features, "inst-l1d-flush-trig2"); - if (np && of_property_read_bool(np, "enabled")) + if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_TRIG2)) type = L1D_FLUSH_MTTRIG;

- of_node_put(np); - - np = of_get_child_by_name(fw_features, "inst-l1d-flush-ori30,30,0"); - if (np && of_property_read_bool(np, "enabled")) + if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_ORI30)) type = L1D_FLUSH_ORI; - - of_node_put(np); - - /* Enable unless firmware says NOT to */ - enable = 2; - np = of_get_child_by_name(fw_features, "needs-l1d-flush-msr-hv-1-to-0"); - if (np && of_property_read_bool(np, "disabled")) - enable--; - - of_node_put(np); - - np = of_get_child_by_name(fw_features, "needs-l1d-flush-msr-pr-0-to-1"); - if (np && of_property_read_bool(np, "disabled")) - enable--; - - np = of_get_child_by_name(fw_features, "speculation-policy-favor-security"); - if (np && of_property_read_bool(np, "disabled")) - enable = 0; - - of_node_put(np); - of_node_put(fw_features); }

- setup_rfi_flush(type, enable > 0); + enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \ + (security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) || \ + security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV)); + + setup_rfi_flush(type, enable); }

static void __init pnv_setup_arch(void)

commit 56986016cb8cd9050e601831fe89f332b4e3c46e upstream.

Add a definition for cpu_show_spectre_v1() to override the generic version. Currently this just prints "Not affected" or "Vulnerable" based on the firmware flag.

Although the kernel does have array_index_nospec() in a few places, we haven't yet audited all the powerpc code to see where it's necessary, so for now we don't list that as a mitigation.

Signed-off-by: Michael Ellerman mpe@ellerman.id.au --- arch/powerpc/kernel/security.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c index 865db6f8bcca..0eace3cac818 100644 --- a/arch/powerpc/kernel/security.c +++ b/arch/powerpc/kernel/security.c @@ -50,3 +50,11 @@ ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, cha

return sprintf(buf, "Vulnerable\n"); } + +ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf) +{ + if (!security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR)) + return sprintf(buf, "Not affected\n"); + + return sprintf(buf, "Vulnerable\n"); +}

From: Mauricio Faria de Oliveira mauricfo@linux.vnet.ibm.com

commit 0f9bdfe3c77091e8704d2e510eb7c2c2c6cde524 upstream.

The H_CPU_BEHAV_* flags should be checked for in the 'behaviour' field of 'struct h_cpu_char_result' -- 'character' is for H_CPU_CHAR_* flags.

Found by playing around with QEMU's implementation of the hypercall:

H_CPU_CHAR=0xf000000000000000 H_CPU_BEHAV=0x0000000000000000

This clears H_CPU_BEHAV_FAVOUR_SECURITY and H_CPU_BEHAV_L1D_FLUSH_PR so pseries_setup_rfi_flush() disables 'rfi_flush'; and it also clears H_CPU_CHAR_L1D_THREAD_PRIV flag. So there is no RFI flush mitigation at all for cpu_show_meltdown() to report; but currently it does:

Original kernel:

# cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush

Patched kernel:

# cat /sys/devices/system/cpu/vulnerabilities/meltdown Not affected

H_CPU_CHAR=0x0000000000000000 H_CPU_BEHAV=0xf000000000000000

This sets H_CPU_BEHAV_BNDS_CHK_SPEC_BAR so cpu_show_spectre_v1() should report vulnerable; but currently it doesn't:

Original kernel:

# cat /sys/devices/system/cpu/vulnerabilities/spectre_v1 Not affected

Patched kernel:

# cat /sys/devices/system/cpu/vulnerabilities/spectre_v1 Vulnerable

Brown-paper-bag-by: Michael Ellerman mpe@ellerman.id.au Fixes: f636c14790ea ("powerpc/pseries: Set or clear security feature flags") Signed-off-by: Mauricio Faria de Oliveira mauricfo@linux.vnet.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au --- arch/powerpc/platforms/pseries/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index ba0a36c577ca..3cb12d27f168 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -484,13 +484,13 @@ static void init_cpu_char_feature_flags(struct h_cpu_char_result *result) * The features below are enabled by default, so we instead look to see * if firmware has *disabled* them, and clear them if so. */ - if (!(result->character & H_CPU_BEHAV_FAVOUR_SECURITY)) + if (!(result->behaviour & H_CPU_BEHAV_FAVOUR_SECURITY)) security_ftr_clear(SEC_FTR_FAVOUR_SECURITY);

- if (!(result->character & H_CPU_BEHAV_L1D_FLUSH_PR)) + if (!(result->behaviour & H_CPU_BEHAV_L1D_FLUSH_PR)) security_ftr_clear(SEC_FTR_L1D_FLUSH_PR);

- if (!(result->character & H_CPU_BEHAV_BNDS_CHK_SPEC_BAR)) + if (!(result->behaviour & H_CPU_BEHAV_BNDS_CHK_SPEC_BAR)) security_ftr_clear(SEC_FTR_BNDS_CHK_SPEC_BAR); }

From: Mauricio Faria de Oliveira mauricfo@linux.vnet.ibm.com

commit 6232774f1599028a15418179d17f7df47ede770a upstream.

After migration the security feature flags might have changed (e.g., destination system with unpatched firmware), but some flags are not set/clear again in init_cpu_char_feature_flags() because it assumes the security flags to be the defaults.

Additionally, if the H_GET_CPU_CHARACTERISTICS hypercall fails then init_cpu_char_feature_flags() does not run again, which potentially might leave the system in an insecure or sub-optimal configuration.

So, just restore the security feature flags to the defaults assumed by init_cpu_char_feature_flags() so it can set/clear them correctly, and to ensure safe settings are in place in case the hypercall fail.

Fixes: f636c14790ea ("powerpc/pseries: Set or clear security feature flags") Depends-on: 19887d6a28e2 ("powerpc: Move default security feature flags") Signed-off-by: Mauricio Faria de Oliveira mauricfo@linux.vnet.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au --- arch/powerpc/platforms/pseries/setup.c | 11 +++++++++++ 1 file changed, 11 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 3cb12d27f168..1973de3cf355 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -462,6 +462,10 @@ static void __init find_and_init_phbs(void)

static void init_cpu_char_feature_flags(struct h_cpu_char_result *result) { + /* + * The features below are disabled by default, so we instead look to see + * if firmware has *enabled* them, and set them if so. + */ if (result->character & H_CPU_CHAR_SPEC_BAR_ORI31) security_ftr_set(SEC_FTR_SPEC_BAR_ORI31);

@@ -501,6 +505,13 @@ void pseries_setup_rfi_flush(void) bool enable; long rc;

+ /* + * Set features to the defaults assumed by init_cpu_char_feature_flags() + * so it can set/clear again any features that might have changed after + * migration, and in case the hypercall fails and it is not even called. + */ + powerpc_security_features = SEC_FTR_DEFAULT; + rc = plpar_get_cpu_characteristics(&result); if (rc == H_SUCCESS) init_cpu_char_feature_flags(&result);

From: Nicholas Piggin npiggin@gmail.com

commit a048a07d7f4535baa4cbad6bc024f175317ab938 upstream.

On some CPUs we can prevent a vulnerability related to store-to-load forwarding by preventing store forwarding between privilege domains, by inserting a barrier in kernel entry and exit paths.

This is known to be the case on at least Power7, Power8 and Power9 powerpc CPUs.

Barriers must be inserted generally before the first load after moving to a higher privilege, and after the last store before moving to a lower privilege, HV and PR privilege transitions must be protected.

Barriers are added as patch sections, with all kernel/hypervisor entry points patched, and the exit points to lower privilge levels patched similarly to the RFI flush patching.

Firmware advertisement is not implemented yet, so CPU flush types are hard coded.

Thanks to Michal Suchánek for bug fixes and review.

Signed-off-by: Nicholas Piggin npiggin@gmail.com Signed-off-by: Mauricio Faria de Oliveira mauricfo@linux.vnet.ibm.com Signed-off-by: Michael Neuling mikey@neuling.org Signed-off-by: Michal Suchánek msuchanek@suse.de Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Linus Torvalds torvalds@linux-foundation.org --- arch/powerpc/include/asm/exception-64s.h | 29 ++++++ arch/powerpc/include/asm/feature-fixups.h | 19 ++++ arch/powerpc/include/asm/security_features.h | 11 ++ arch/powerpc/kernel/exceptions-64s.S | 19 +++- arch/powerpc/kernel/security.c | 149 +++++++++++++++++++++++++++ arch/powerpc/kernel/vmlinux.lds.S | 14 +++ arch/powerpc/lib/feature-fixups.c | 115 +++++++++++++++++++++ arch/powerpc/platforms/powernv/setup.c | 1 + arch/powerpc/platforms/pseries/setup.c | 1 + 9 files changed, 356 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index ccf10c2f8899..c3bdd2d8ec90 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -69,6 +69,27 @@ */ #define EX_R3 EX_DAR

+#define STF_ENTRY_BARRIER_SLOT \ + STF_ENTRY_BARRIER_FIXUP_SECTION; \ + nop; \ + nop; \ + nop + +#define STF_EXIT_BARRIER_SLOT \ + STF_EXIT_BARRIER_FIXUP_SECTION; \ + nop; \ + nop; \ + nop; \ + nop; \ + nop; \ + nop + +/* + * r10 must be free to use, r13 must be paca + */ +#define INTERRUPT_TO_KERNEL \ + STF_ENTRY_BARRIER_SLOT + /* * Macros for annotating the expected destination of (h)rfid * @@ -85,16 +106,19 @@ rfid

#define RFI_TO_USER \ + STF_EXIT_BARRIER_SLOT; \ RFI_FLUSH_SLOT; \ rfid; \ b rfi_flush_fallback

#define RFI_TO_USER_OR_KERNEL \ + STF_EXIT_BARRIER_SLOT; \ RFI_FLUSH_SLOT; \ rfid; \ b rfi_flush_fallback

#define RFI_TO_GUEST \ + STF_EXIT_BARRIER_SLOT; \ RFI_FLUSH_SLOT; \ rfid; \ b rfi_flush_fallback @@ -103,21 +127,25 @@ hrfid

#define HRFI_TO_USER \ + STF_EXIT_BARRIER_SLOT; \ RFI_FLUSH_SLOT; \ hrfid; \ b hrfi_flush_fallback

#define HRFI_TO_USER_OR_KERNEL \ + STF_EXIT_BARRIER_SLOT; \ RFI_FLUSH_SLOT; \ hrfid; \ b hrfi_flush_fallback

#define HRFI_TO_GUEST \ + STF_EXIT_BARRIER_SLOT; \ RFI_FLUSH_SLOT; \ hrfid; \ b hrfi_flush_fallback

#define HRFI_TO_UNKNOWN \ + STF_EXIT_BARRIER_SLOT; \ RFI_FLUSH_SLOT; \ hrfid; \ b hrfi_flush_fallback @@ -249,6 +277,7 @@ END_FTR_SECTION_NESTED(ftr,ftr,943) #define __EXCEPTION_PROLOG_1(area, extra, vec) \ OPT_SAVE_REG_TO_PACA(area+EX_PPR, r9, CPU_FTR_HAS_PPR); \ OPT_SAVE_REG_TO_PACA(area+EX_CFAR, r10, CPU_FTR_CFAR); \ + INTERRUPT_TO_KERNEL; \ SAVE_CTR(r10, area); \ mfcr r9; \ extra(vec); \ diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h index 1e82eb3caabd..a9b64df34e2a 100644 --- a/arch/powerpc/include/asm/feature-fixups.h +++ b/arch/powerpc/include/asm/feature-fixups.h @@ -187,6 +187,22 @@ label##3: \ FTR_ENTRY_OFFSET label##1b-label##3b; \ .popsection;

+#define STF_ENTRY_BARRIER_FIXUP_SECTION \ +953: \ + .pushsection __stf_entry_barrier_fixup,"a"; \ + .align 2; \ +954: \ + FTR_ENTRY_OFFSET 953b-954b; \ + .popsection; + +#define STF_EXIT_BARRIER_FIXUP_SECTION \ +955: \ + .pushsection __stf_exit_barrier_fixup,"a"; \ + .align 2; \ +956: \ + FTR_ENTRY_OFFSET 955b-956b; \ + .popsection; + #define RFI_FLUSH_FIXUP_SECTION \ 951: \ .pushsection __rfi_flush_fixup,"a"; \ @@ -199,6 +215,9 @@ label##3: \ #ifndef __ASSEMBLY__ #include <linux/types.h>

+extern long stf_barrier_fallback; +extern long __start___stf_entry_barrier_fixup, __stop___stf_entry_barrier_fixup; +extern long __start___stf_exit_barrier_fixup, __stop___stf_exit_barrier_fixup; extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup;

void apply_feature_fixups(void); diff --git a/arch/powerpc/include/asm/security_features.h b/arch/powerpc/include/asm/security_features.h index fa4d2e1cf772..44989b22383c 100644 --- a/arch/powerpc/include/asm/security_features.h +++ b/arch/powerpc/include/asm/security_features.h @@ -12,6 +12,17 @@ extern unsigned long powerpc_security_features; extern bool rfi_flush;

+/* These are bit flags */ +enum stf_barrier_type { + STF_BARRIER_NONE = 0x1, + STF_BARRIER_FALLBACK = 0x2, + STF_BARRIER_EIEIO = 0x4, + STF_BARRIER_SYNC_ORI = 0x8, +}; + +void setup_stf_barrier(void); +void do_stf_barrier_fixups(enum stf_barrier_type types); + static inline void security_ftr_set(unsigned long feature) { powerpc_security_features |= feature; diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index feba0a8d040e..c09f0a6f8495 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -825,7 +825,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM) #endif

-EXC_REAL_MASKABLE(decrementer, 0x900, 0x80) +EXC_REAL_OOL_MASKABLE(decrementer, 0x900, 0x80) EXC_VIRT_MASKABLE(decrementer, 0x4900, 0x80, 0x900) TRAMP_KVM(PACA_EXGEN, 0x900) EXC_COMMON_ASYNC(decrementer_common, 0x900, timer_interrupt) @@ -901,6 +901,7 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception) mtctr r13; \ GET_PACA(r13); \ std r10,PACA_EXGEN+EX_R10(r13); \ + INTERRUPT_TO_KERNEL; \ KVMTEST_PR(0xc00); /* uses r10, branch to do_kvm_0xc00_system_call */ \ HMT_MEDIUM; \ mfctr r9; @@ -909,7 +910,8 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception) #define SYSCALL_KVMTEST \ HMT_MEDIUM; \ mr r9,r13; \ - GET_PACA(r13); + GET_PACA(r13); \ + INTERRUPT_TO_KERNEL; #endif #define LOAD_SYSCALL_HANDLER(reg) \ @@ -1434,6 +1436,19 @@ masked_##_H##interrupt: \ b .; \ MASKED_DEC_HANDLER(_H)

+TRAMP_REAL_BEGIN(stf_barrier_fallback) + std r9,PACA_EXRFI+EX_R9(r13) + std r10,PACA_EXRFI+EX_R10(r13) + sync + ld r9,PACA_EXRFI+EX_R9(r13) + ld r10,PACA_EXRFI+EX_R10(r13) + ori 31,31,0 + .rept 14 + b 1f +1: + .endr + blr + TRAMP_REAL_BEGIN(rfi_flush_fallback) SET_SCRATCH0(r13); GET_PACA(r13); diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c index bab5a27ea805..b98a722da915 100644 --- a/arch/powerpc/kernel/security.c +++ b/arch/powerpc/kernel/security.c @@ -8,6 +8,7 @@ #include <linux/device.h> #include <linux/seq_buf.h>

+#include <asm/debugfs.h> #include <asm/security_features.h>

@@ -86,3 +87,151 @@ ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, c

return s.len; } + +/* + * Store-forwarding barrier support. + */ + +static enum stf_barrier_type stf_enabled_flush_types; +static bool no_stf_barrier; +bool stf_barrier; + +static int __init handle_no_stf_barrier(char *p) +{ + pr_info("stf-barrier: disabled on command line."); + no_stf_barrier = true; + return 0; +} + +early_param("no_stf_barrier", handle_no_stf_barrier); + +/* This is the generic flag used by other architectures */ +static int __init handle_ssbd(char *p) +{ + if (!p || strncmp(p, "auto", 5) == 0 || strncmp(p, "on", 2) == 0 ) { + /* Until firmware tells us, we have the barrier with auto */ + return 0; + } else if (strncmp(p, "off", 3) == 0) { + handle_no_stf_barrier(NULL); + return 0; + } else + return 1; + + return 0; +} +early_param("spec_store_bypass_disable", handle_ssbd); + +/* This is the generic flag used by other architectures */ +static int __init handle_no_ssbd(char *p) +{ + handle_no_stf_barrier(NULL); + return 0; +} +early_param("nospec_store_bypass_disable", handle_no_ssbd); + +static void stf_barrier_enable(bool enable) +{ + if (enable) + do_stf_barrier_fixups(stf_enabled_flush_types); + else + do_stf_barrier_fixups(STF_BARRIER_NONE); + + stf_barrier = enable; +} + +void setup_stf_barrier(void) +{ + enum stf_barrier_type type; + bool enable, hv; + + hv = cpu_has_feature(CPU_FTR_HVMODE); + + /* Default to fallback in case fw-features are not available */ + if (cpu_has_feature(CPU_FTR_ARCH_300)) + type = STF_BARRIER_EIEIO; + else if (cpu_has_feature(CPU_FTR_ARCH_207S)) + type = STF_BARRIER_SYNC_ORI; + else if (cpu_has_feature(CPU_FTR_ARCH_206)) + type = STF_BARRIER_FALLBACK; + else + type = STF_BARRIER_NONE; + + enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && + (security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) || + (security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) && hv)); + + if (type == STF_BARRIER_FALLBACK) { + pr_info("stf-barrier: fallback barrier available\n"); + } else if (type == STF_BARRIER_SYNC_ORI) { + pr_info("stf-barrier: hwsync barrier available\n"); + } else if (type == STF_BARRIER_EIEIO) { + pr_info("stf-barrier: eieio barrier available\n"); + } + + stf_enabled_flush_types = type; + + if (!no_stf_barrier) + stf_barrier_enable(enable); +} + +ssize_t cpu_show_spec_store_bypass(struct device *dev, struct device_attribute *attr, char *buf) +{ + if (stf_barrier && stf_enabled_flush_types != STF_BARRIER_NONE) { + const char *type; + switch (stf_enabled_flush_types) { + case STF_BARRIER_EIEIO: + type = "eieio"; + break; + case STF_BARRIER_SYNC_ORI: + type = "hwsync"; + break; + case STF_BARRIER_FALLBACK: + type = "fallback"; + break; + default: + type = "unknown"; + } + return sprintf(buf, "Mitigation: Kernel entry/exit barrier (%s)\n", type); + } + + if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) && + !security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR)) + return sprintf(buf, "Not affected\n"); + + return sprintf(buf, "Vulnerable\n"); +} + +#ifdef CONFIG_DEBUG_FS +static int stf_barrier_set(void *data, u64 val) +{ + bool enable; + + if (val == 1) + enable = true; + else if (val == 0) + enable = false; + else + return -EINVAL; + + /* Only do anything if we're changing state */ + if (enable != stf_barrier) + stf_barrier_enable(enable); + + return 0; +} + +static int stf_barrier_get(void *data, u64 *val) +{ + *val = stf_barrier ? 1 : 0; + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(fops_stf_barrier, stf_barrier_get, stf_barrier_set, "%llu\n"); + +static __init int stf_barrier_debugfs_init(void) +{ + debugfs_create_file("stf_barrier", 0600, powerpc_debugfs_root, NULL, &fops_stf_barrier); + return 0; +} +device_initcall(stf_barrier_debugfs_init); +#endif /* CONFIG_DEBUG_FS */ diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 307843d23682..c89ffb88fa3b 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -133,6 +133,20 @@ SECTIONS RO_DATA(PAGE_SIZE)

#ifdef CONFIG_PPC64 + . = ALIGN(8); + __stf_entry_barrier_fixup : AT(ADDR(__stf_entry_barrier_fixup) - LOAD_OFFSET) { + __start___stf_entry_barrier_fixup = .; + *(__stf_entry_barrier_fixup) + __stop___stf_entry_barrier_fixup = .; + } + + . = ALIGN(8); + __stf_exit_barrier_fixup : AT(ADDR(__stf_exit_barrier_fixup) - LOAD_OFFSET) { + __start___stf_exit_barrier_fixup = .; + *(__stf_exit_barrier_fixup) + __stop___stf_exit_barrier_fixup = .; + } + . = ALIGN(8); __rfi_flush_fixup : AT(ADDR(__rfi_flush_fixup) - LOAD_OFFSET) { __start___rfi_flush_fixup = .; diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c index 8ac72f7d638f..762a899e85a4 100644 --- a/arch/powerpc/lib/feature-fixups.c +++ b/arch/powerpc/lib/feature-fixups.c @@ -23,6 +23,7 @@ #include <asm/page.h> #include <asm/sections.h> #include <asm/setup.h> +#include <asm/security_features.h> #include <asm/firmware.h>

struct fixup_entry { @@ -117,6 +118,120 @@ void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end) }

#ifdef CONFIG_PPC_BOOK3S_64 +void do_stf_entry_barrier_fixups(enum stf_barrier_type types) +{ + unsigned int instrs[3], *dest; + long *start, *end; + int i; + + start = PTRRELOC(&__start___stf_entry_barrier_fixup), + end = PTRRELOC(&__stop___stf_entry_barrier_fixup); + + instrs[0] = 0x60000000; /* nop */ + instrs[1] = 0x60000000; /* nop */ + instrs[2] = 0x60000000; /* nop */ + + i = 0; + if (types & STF_BARRIER_FALLBACK) { + instrs[i++] = 0x7d4802a6; /* mflr r10 */ + instrs[i++] = 0x60000000; /* branch patched below */ + instrs[i++] = 0x7d4803a6; /* mtlr r10 */ + } else if (types & STF_BARRIER_EIEIO) { + instrs[i++] = 0x7e0006ac; /* eieio + bit 6 hint */ + } else if (types & STF_BARRIER_SYNC_ORI) { + instrs[i++] = 0x7c0004ac; /* hwsync */ + instrs[i++] = 0xe94d0000; /* ld r10,0(r13) */ + instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */ + } + + for (i = 0; start < end; start++, i++) { + dest = (void *)start + *start; + + pr_devel("patching dest %lx\n", (unsigned long)dest); + + patch_instruction(dest, instrs[0]); + + if (types & STF_BARRIER_FALLBACK) + patch_branch(dest + 1, (unsigned long)&stf_barrier_fallback, + BRANCH_SET_LINK); + else + patch_instruction(dest + 1, instrs[1]); + + patch_instruction(dest + 2, instrs[2]); + } + + printk(KERN_DEBUG "stf-barrier: patched %d entry locations (%s barrier)\n", i, + (types == STF_BARRIER_NONE) ? "no" : + (types == STF_BARRIER_FALLBACK) ? "fallback" : + (types == STF_BARRIER_EIEIO) ? "eieio" : + (types == (STF_BARRIER_SYNC_ORI)) ? "hwsync" + : "unknown"); +} + +void do_stf_exit_barrier_fixups(enum stf_barrier_type types) +{ + unsigned int instrs[6], *dest; + long *start, *end; + int i; + + start = PTRRELOC(&__start___stf_exit_barrier_fixup), + end = PTRRELOC(&__stop___stf_exit_barrier_fixup); + + instrs[0] = 0x60000000; /* nop */ + instrs[1] = 0x60000000; /* nop */ + instrs[2] = 0x60000000; /* nop */ + instrs[3] = 0x60000000; /* nop */ + instrs[4] = 0x60000000; /* nop */ + instrs[5] = 0x60000000; /* nop */ + + i = 0; + if (types & STF_BARRIER_FALLBACK || types & STF_BARRIER_SYNC_ORI) { + if (cpu_has_feature(CPU_FTR_HVMODE)) { + instrs[i++] = 0x7db14ba6; /* mtspr 0x131, r13 (HSPRG1) */ + instrs[i++] = 0x7db04aa6; /* mfspr r13, 0x130 (HSPRG0) */ + } else { + instrs[i++] = 0x7db243a6; /* mtsprg 2,r13 */ + instrs[i++] = 0x7db142a6; /* mfsprg r13,1 */ + } + instrs[i++] = 0x7c0004ac; /* hwsync */ + instrs[i++] = 0xe9ad0000; /* ld r13,0(r13) */ + instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */ + if (cpu_has_feature(CPU_FTR_HVMODE)) { + instrs[i++] = 0x7db14aa6; /* mfspr r13, 0x131 (HSPRG1) */ + } else { + instrs[i++] = 0x7db242a6; /* mfsprg r13,2 */ + } + } else if (types & STF_BARRIER_EIEIO) { + instrs[i++] = 0x7e0006ac; /* eieio + bit 6 hint */ + } + + for (i = 0; start < end; start++, i++) { + dest = (void *)start + *start; + + pr_devel("patching dest %lx\n", (unsigned long)dest); + + patch_instruction(dest, instrs[0]); + patch_instruction(dest + 1, instrs[1]); + patch_instruction(dest + 2, instrs[2]); + patch_instruction(dest + 3, instrs[3]); + patch_instruction(dest + 4, instrs[4]); + patch_instruction(dest + 5, instrs[5]); + } + printk(KERN_DEBUG "stf-barrier: patched %d exit locations (%s barrier)\n", i, + (types == STF_BARRIER_NONE) ? "no" : + (types == STF_BARRIER_FALLBACK) ? "fallback" : + (types == STF_BARRIER_EIEIO) ? "eieio" : + (types == (STF_BARRIER_SYNC_ORI)) ? "hwsync" + : "unknown"); +} + + +void do_stf_barrier_fixups(enum stf_barrier_type types) +{ + do_stf_entry_barrier_fixups(types); + do_stf_exit_barrier_fixups(types); +} + void do_rfi_flush_fixups(enum l1d_flush_type types) { unsigned int instrs[3], *dest; diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 14a24c63e6b0..fd143c934768 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -130,6 +130,7 @@ static void __init pnv_setup_arch(void) set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT);

pnv_setup_rfi_flush(); + setup_stf_barrier();

/* Initialize SMP */ pnv_smp_init(); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 1973de3cf355..45f814041448 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -554,6 +554,7 @@ static void __init pSeries_setup_arch(void) fwnmi_init();

pseries_setup_rfi_flush(); + setup_stf_barrier();

/* By default, only probe PCI (can be overridden by rtas_pci) */ pci_add_flags(PCI_PROBE_ONLY);