From: Takashi Iwai tiwai@suse.de

commit 2e6b836312a477d647a7920b56810a5a25f6c856 upstream.

PCM buffers might be allocated dynamically when the buffer preallocation failed or a larger buffer is requested, and it's not guaranteed that substream->dma_buffer points to the actually used buffer. The address should be retrieved from runtime->dma_addr, instead of substream->dma_buffer (and shouldn't use virt_to_phys).

Also, remove the line overriding runtime->dma_area superfluously, which was already set up at the PCM buffer allocation.

Cc: Cezary Rojewski cezary.rojewski@intel.com Cc: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Link: https://lore.kernel.org/r/20210728112353.6675-3-tiwai@suse.de Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/intel/atom/sst-mfld-platform-pcm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/sound/soc/intel/atom/sst-mfld-platform-pcm.c b/sound/soc/intel/atom/sst-mfld-platform-pcm.c index edb244331e6e..64079423b298 100644 --- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c +++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c @@ -134,7 +134,7 @@ static void sst_fill_alloc_params(struct snd_pcm_substream *substream, snd_pcm_uframes_t period_size; ssize_t periodbytes; ssize_t buffer_bytes = snd_pcm_lib_buffer_bytes(substream); - u32 buffer_addr = virt_to_phys(substream->dma_buffer.area); + u32 buffer_addr = substream->runtime->dma_addr;

channels = substream->runtime->channels; period_size = substream->runtime->period_size; @@ -240,7 +240,6 @@ static int sst_platform_alloc_stream(struct snd_pcm_substream *substream, /* set codec params and inform SST driver the same */ sst_fill_pcm_params(substream, &param); sst_fill_alloc_params(substream, &alloc_params); - substream->runtime->dma_area = substream->dma_buffer.area; str_params.sparams = param; str_params.aparams = alloc_params; str_params.codec = SST_CODEC_TYPE_PCM;

From: Takeshi Misawa jeliantsurux@gmail.com

[ Upstream commit 1090340f7ee53e824fd4eef66a4855d548110c5b ]

If IEEE-802.15.4-RAW is closed before receive skb, skb is leaked. Fix this, by freeing sk_receive_queue in sk->sk_destruct().

syzbot report: BUG: memory leak unreferenced object 0xffff88810f644600 (size 232): comm "softirq", pid 0, jiffies 4294967032 (age 81.270s) hex dump (first 32 bytes): 10 7d 4b 12 81 88 ff ff 10 7d 4b 12 81 88 ff ff .}K......}K..... 00 00 00 00 00 00 00 00 40 7c 4b 12 81 88 ff ff ........@|K..... backtrace: [<ffffffff83651d4a>] skb_clone+0xaa/0x2b0 net/core/skbuff.c:1496 [<ffffffff83fe1b80>] ieee802154_raw_deliver net/ieee802154/socket.c:369 [inline] [<ffffffff83fe1b80>] ieee802154_rcv+0x100/0x340 net/ieee802154/socket.c:1070 [<ffffffff8367cc7a>] __netif_receive_skb_one_core+0x6a/0xa0 net/core/dev.c:5384 [<ffffffff8367cd07>] __netif_receive_skb+0x27/0xa0 net/core/dev.c:5498 [<ffffffff8367cdd9>] netif_receive_skb_internal net/core/dev.c:5603 [inline] [<ffffffff8367cdd9>] netif_receive_skb+0x59/0x260 net/core/dev.c:5662 [<ffffffff83fe6302>] ieee802154_deliver_skb net/mac802154/rx.c:29 [inline] [<ffffffff83fe6302>] ieee802154_subif_frame net/mac802154/rx.c:102 [inline] [<ffffffff83fe6302>] __ieee802154_rx_handle_packet net/mac802154/rx.c:212 [inline] [<ffffffff83fe6302>] ieee802154_rx+0x612/0x620 net/mac802154/rx.c:284 [<ffffffff83fe59a6>] ieee802154_tasklet_handler+0x86/0xa0 net/mac802154/main.c:35 [<ffffffff81232aab>] tasklet_action_common.constprop.0+0x5b/0x100 kernel/softirq.c:557 [<ffffffff846000bf>] __do_softirq+0xbf/0x2ab kernel/softirq.c:345 [<ffffffff81232f4c>] do_softirq kernel/softirq.c:248 [inline] [<ffffffff81232f4c>] do_softirq+0x5c/0x80 kernel/softirq.c:235 [<ffffffff81232fc1>] __local_bh_enable_ip+0x51/0x60 kernel/softirq.c:198 [<ffffffff8367a9a4>] local_bh_enable include/linux/bottom_half.h:32 [inline] [<ffffffff8367a9a4>] rcu_read_unlock_bh include/linux/rcupdate.h:745 [inline] [<ffffffff8367a9a4>] __dev_queue_xmit+0x7f4/0xf60 net/core/dev.c:4221 [<ffffffff83fe2db4>] raw_sendmsg+0x1f4/0x2b0 net/ieee802154/socket.c:295 [<ffffffff8363af16>] sock_sendmsg_nosec net/socket.c:654 [inline] [<ffffffff8363af16>] sock_sendmsg+0x56/0x80 net/socket.c:674 [<ffffffff8363deec>] __sys_sendto+0x15c/0x200 net/socket.c:1977 [<ffffffff8363dfb6>] __do_sys_sendto net/socket.c:1989 [inline] [<ffffffff8363dfb6>] __se_sys_sendto net/socket.c:1985 [inline] [<ffffffff8363dfb6>] __x64_sys_sendto+0x26/0x30 net/socket.c:1985

Fixes: 9ec767160357 ("net: add IEEE 802.15.4 socket family implementation") Reported-and-tested-by: syzbot+1f68113fa907bf0695a8@syzkaller.appspotmail.com Signed-off-by: Takeshi Misawa jeliantsurux@gmail.com Acked-by: Alexander Aring aahringo@redhat.com Link: https://lore.kernel.org/r/20210805075414.GA15796@DESKTOP Signed-off-by: Stefan Schmidt stefan@datenfreihafen.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ieee802154/socket.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/net/ieee802154/socket.c b/net/ieee802154/socket.c index cb6c0772ea36..42ab1b61b513 100644 --- a/net/ieee802154/socket.c +++ b/net/ieee802154/socket.c @@ -983,6 +983,11 @@ static const struct proto_ops ieee802154_dgram_ops = { #endif };

+static void ieee802154_sock_destruct(struct sock *sk) +{ + skb_queue_purge(&sk->sk_receive_queue); +} + /* Create a socket. Initialise the socket, blank the addresses * set the state. */ @@ -1023,7 +1028,7 @@ static int ieee802154_create(struct net *net, struct socket *sock, sock->ops = ops;

sock_init_data(sock, sk); - /* FIXME: sk->sk_destruct */ + sk->sk_destruct = ieee802154_sock_destruct; sk->sk_family = PF_IEEE802154;

/* Checksums on by default */

From: Randy Dunlap rdunlap@infradead.org

[ Upstream commit 839ad22f755132838f406751439363c07272ad87 ]

Skip (omit) any version string info that is parenthesized.

Warning: objdump version 15) is older than 2.19 Warning: Skipping posttest.

where 'objdump -v' says: GNU objdump (GNU Binutils; SUSE Linux Enterprise 15) 2.35.1.20201123-7.18

Fixes: 8bee738bb1979 ("x86: Fix objdump version check in chkobjdump.awk for different formats.") Signed-off-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Thomas Gleixner tglx@linutronix.de Reviewed-by: Masami Hiramatsu mhiramat@kernel.org Link: https://lore.kernel.org/r/20210731000146.2720-1-rdunlap@infradead.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/tools/chkobjdump.awk | 1 + 1 file changed, 1 insertion(+)

diff --git a/arch/x86/tools/chkobjdump.awk b/arch/x86/tools/chkobjdump.awk index fd1ab80be0de..a4cf678cf5c8 100644 --- a/arch/x86/tools/chkobjdump.awk +++ b/arch/x86/tools/chkobjdump.awk @@ -10,6 +10,7 @@ BEGIN {

/^GNU objdump/ { verstr = "" + gsub(/(.*)/, ""); for (i = 3; i <= NF; i++) if (match($(i), "^[0-9]")) { verstr = $(i);

From: Thomas Gleixner tglx@linutronix.de

commit 361fd37397f77578735907341579397d5bed0a2d upstream.

msi_mask_irq() takes a mask and a flags argument. The mask argument is used to mask out bits from the cached mask and the flags argument to set bits.

Some places invoke it with a flags argument which sets bits which are not used by the device, i.e. when the device supports up to 8 vectors a full unmask in some places sets the mask to 0xFFFFFF00. While devices probably do not care, it's still bad practice.

Fixes: 7ba1930db02f ("PCI MSI: Unmask MSI if setup failed") Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Marc Zyngier maz@kernel.org Reviewed-by: Marc Zyngier maz@kernel.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.568173099@linutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/msi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 58bef2f6126b..4680632b9e65 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -624,21 +624,21 @@ static int msi_capability_init(struct pci_dev *dev, int nvec) /* Configure MSI capability structure */ ret = pci_msi_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI); if (ret) { - msi_mask_irq(entry, mask, ~mask); + msi_mask_irq(entry, mask, 0); free_msi_irqs(dev); return ret; }

ret = msi_verify_entries(dev); if (ret) { - msi_mask_irq(entry, mask, ~mask); + msi_mask_irq(entry, mask, 0); free_msi_irqs(dev); return ret; }

ret = populate_msi_sysfs(dev); if (ret) { - msi_mask_irq(entry, mask, ~mask); + msi_mask_irq(entry, mask, 0); free_msi_irqs(dev); return ret; } @@ -891,7 +891,7 @@ void pci_msi_shutdown(struct pci_dev *dev) /* Return the device with MSI unmasked as initial states */ mask = msi_mask(desc->msi_attrib.multi_cap); /* Keep cached state to be restored */ - __pci_msi_desc_mask_irq(desc, mask, ~mask); + __pci_msi_desc_mask_irq(desc, mask, 0);

/* Restore dev->irq to its default pin-assertion irq */ dev->irq = desc->msi_attrib.default_irq;

From: Thomas Gleixner tglx@linutronix.de

commit d28d4ad2a1aef27458b3383725bb179beb8d015c upstream.

No point in using the raw write function from shutdown. Preparatory change to introduce proper serialization for the msi_desc::masked cache.

Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Marc Zyngier maz@kernel.org Reviewed-by: Marc Zyngier maz@kernel.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.674391354@linutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/msi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 84ccff0f4b1b..e3865e274389 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -890,7 +890,7 @@ void pci_msi_shutdown(struct pci_dev *dev)

/* Return the device with MSI unmasked as initial states */ mask = msi_mask(desc->msi_attrib.multi_cap); - __pci_msi_desc_mask_irq(desc, mask, 0); + msi_mask_irq(desc, mask, 0);

/* Restore dev->irq to its default pin-assertion irq */ dev->irq = desc->msi_attrib.default_irq;

From: Thomas Gleixner tglx@linutronix.de

commit 7d5ec3d3612396dc6d4b76366d20ab9fc06f399f upstream.

When MSI-X is enabled the ordering of calls is:

msix_map_region(); msix_setup_entries(); pci_msi_setup_msi_irqs(); msix_program_entries();

This has a few interesting issues:

1) msix_setup_entries() allocates the MSI descriptors and initializes them except for the msi_desc:masked member which is left zero initialized.

2) pci_msi_setup_msi_irqs() allocates the interrupt descriptors and sets up the MSI interrupts which ends up in pci_write_msi_msg() unless the interrupt chip provides its own irq_write_msi_msg() function.

3) msix_program_entries() does not do what the name suggests. It solely updates the entries array (if not NULL) and initializes the masked member for each MSI descriptor by reading the hardware state and then masks the entry.

Obviously this has some issues:

1) The uninitialized masked member of msi_desc prevents the enforcement of masking the entry in pci_write_msi_msg() depending on the cached masked bit. Aside of that half initialized data is a NONO in general

2) msix_program_entries() only ensures that the actually allocated entries are masked. This is wrong as experimentation with crash testing and crash kernel kexec has shown.

This limited testing unearthed that when the production kernel had more entries in use and unmasked when it crashed and the crash kernel allocated a smaller amount of entries, then a full scan of all entries found unmasked entries which were in use in the production kernel.

This is obviously a device or emulation issue as the device reset should mask all MSI-X table entries, but obviously that's just part of the paper specification.

Cure this by:

1) Masking all table entries in hardware 2) Initializing msi_desc::masked in msix_setup_entries() 3) Removing the mask dance in msix_program_entries() 4) Renaming msix_program_entries() to msix_update_entries() to reflect the purpose of that function.

As the masking of unused entries has never been done the Fixes tag refers to a commit in: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git

Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support") Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Marc Zyngier maz@kernel.org Reviewed-by: Marc Zyngier maz@kernel.org Acked-by: Bjorn Helgaas bhelgaas@google.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.403833459@linutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/msi.c | 45 +++++++++++++++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 14 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index dffa5c5bcc76..9cc4a598c652 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -208,6 +208,12 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) __pci_msi_desc_mask_irq(desc, mask, flag); }

+static void __iomem *pci_msix_desc_addr(struct msi_desc *desc) +{ + return desc->mask_base + + desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; +} + /* * This internal function does not flush PCI writes to the device. * All users must ensure that they read from the device before either @@ -678,6 +684,7 @@ static int msix_setup_entries(struct pci_dev *dev, void __iomem *base, struct msix_entry *entries, int nvec) { struct msi_desc *entry; + void __iomem *addr; int i;

for (i = 0; i < nvec; i++) { @@ -698,29 +705,35 @@ static int msix_setup_entries(struct pci_dev *dev, void __iomem *base, entry->mask_base = base; entry->nvec_used = 1;

+ addr = pci_msix_desc_addr(entry); + entry->masked = readl(addr + PCI_MSIX_ENTRY_VECTOR_CTRL); list_add_tail(&entry->list, dev_to_msi_list(&dev->dev)); }

return 0; }

-static void msix_program_entries(struct pci_dev *dev, - struct msix_entry *entries) +static void msix_update_entries(struct pci_dev *dev, struct msix_entry *entries) { struct msi_desc *entry; - int i = 0;

for_each_pci_msi_entry(entry, dev) { - int offset = entries[i].entry * PCI_MSIX_ENTRY_SIZE + - PCI_MSIX_ENTRY_VECTOR_CTRL; - - entries[i].vector = entry->irq; - entry->masked = readl(entry->mask_base + offset); - msix_mask_irq(entry, 1); - i++; + if (entries) { + entries->vector = entry->irq; + entries++; + } } }

+static void msix_mask_all(void __iomem *base, int tsize) +{ + u32 ctrl = PCI_MSIX_ENTRY_CTRL_MASKBIT; + int i; + + for (i = 0; i < tsize; i++, base += PCI_MSIX_ENTRY_SIZE) + writel(ctrl, base + PCI_MSIX_ENTRY_VECTOR_CTRL); +} + /** * msix_capability_init - configure device's MSI-X capability * @dev: pointer to the pci_dev data structure of MSI-X device function @@ -734,9 +747,9 @@ static void msix_program_entries(struct pci_dev *dev, static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries, int nvec) { - int ret; - u16 control; void __iomem *base; + int ret, tsize; + u16 control;

/* * Some devices require MSI-X to be enabled before the MSI-X @@ -748,12 +761,16 @@ static int msix_capability_init(struct pci_dev *dev,

pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &control); /* Request & Map MSI-X table region */ - base = msix_map_region(dev, msix_table_size(control)); + tsize = msix_table_size(control); + base = msix_map_region(dev, tsize); if (!base) { ret = -ENOMEM; goto out_disable; }

+ /* Ensure that all table entries are masked. */ + msix_mask_all(base, tsize); + ret = msix_setup_entries(dev, base, entries, nvec); if (ret) goto out_disable; @@ -767,7 +784,7 @@ static int msix_capability_init(struct pci_dev *dev, if (ret) goto out_free;

- msix_program_entries(dev, entries); + msix_update_entries(dev, entries);

ret = populate_msi_sysfs(dev); if (ret)

From: Thomas Gleixner tglx@linutronix.de

commit b9255a7cb51754e8d2645b65dd31805e282b4f3e upstream.

Nothing enforces the posted writes to be visible when the function returns. Flush them even if the flush might be redundant when the entry is masked already as the unmask will flush as well. This is either setup or a rare affinity change event so the extra flush is not the end of the world.

While this is more a theoretical issue especially the logic in the X86 specific msi_set_affinity() function relies on the assumption that the update has reached the hardware when the function returns.

Again, as this never has been enforced the Fixes tag refers to a commit in: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git

Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support") Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Marc Zyngier maz@kernel.org Reviewed-by: Marc Zyngier maz@kernel.org Acked-by: Bjorn Helgaas bhelgaas@google.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.515188147@linutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/msi.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 208d7b179914..e9c98f1576dd 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -340,6 +340,9 @@ void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg)

if (unmasked) __pci_msix_desc_mask_irq(entry, 0); + + /* Ensure that the writes are visible in the device */ + readl(base + PCI_MSIX_ENTRY_DATA); } else { int pos = dev->msi_cap; u16 msgctl; @@ -360,6 +363,8 @@ void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg) pci_write_config_word(dev, pos + PCI_MSI_DATA_32, msg->data); } + /* Ensure that the writes are visible in the device */ + pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &msgctl); } entry->msg = *msg; }

From: Maxim Levitsky mlevitsk@redhat.com

[ upstream commit 0f923e07124df069ba68d8bb12324398f4b6b709 ]

* Invert the mask of bits that we pick from L2 in nested_vmcb02_prepare_control

* Invert and explicitly use VIRQ related bits bitmask in svm_clear_vintr

This fixes a security issue that allowed a malicious L1 to run L2 with AVIC enabled, which allowed the L2 to exploit the uninitialized and enabled AVIC to read/write the host physical memory at some offsets.

Fixes: 3d6368ef580a ("KVM: SVM: Add VMRUN handler") Signed-off-by: Maxim Levitsky mlevitsk@redhat.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/include/asm/svm.h | 2 ++ arch/x86/kvm/svm.c | 6 +++++- 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h index 6136d99f537b..c1adb2ed6d41 100644 --- a/arch/x86/include/asm/svm.h +++ b/arch/x86/include/asm/svm.h @@ -108,6 +108,8 @@ struct __attribute__ ((__packed__)) vmcb_control_area { #define V_IGN_TPR_SHIFT 20 #define V_IGN_TPR_MASK (1 << V_IGN_TPR_SHIFT)

+#define V_IRQ_INJECTION_BITS_MASK (V_IRQ_MASK | V_INTR_PRIO_MASK | V_IGN_TPR_MASK) + #define V_INTR_MASKING_SHIFT 24 #define V_INTR_MASKING_MASK (1 << V_INTR_MASKING_SHIFT)

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 931acac69703..77bee73faebc 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -2564,7 +2564,11 @@ static bool nested_svm_vmrun(struct vcpu_svm *svm) svm->nested.intercept = nested_vmcb->control.intercept;

svm_flush_tlb(&svm->vcpu); - svm->vmcb->control.int_ctl = nested_vmcb->control.int_ctl | V_INTR_MASKING_MASK; + svm->vmcb->control.int_ctl = nested_vmcb->control.int_ctl & + (V_TPR_MASK | V_IRQ_INJECTION_BITS_MASK); + + svm->vmcb->control.int_ctl |= V_INTR_MASKING_MASK; + if (nested_vmcb->control.int_ctl & V_INTR_MASKING_MASK) svm->vcpu.arch.hflags |= HF_VINTR_MASK; else

From: Dave Gerlach d-gerlach@ti.com

[ Upstream commit 20a6b3fd8e2e2c063b25fbf2ee74d86b898e5087 ]

Based on the latest timing specifications for the TPS65218 from the data sheet, http://www.ti.com/lit/ds/symlink/tps65218.pdf, document SLDS206 from November 2014, we must change the i2c bus speed to better fit within the minimum high SCL time required for proper i2c transfer.

When running at 400khz, measurements show that SCL spends 0.8125 uS/1.666 uS high/low which violates the requirement for minimum high period of SCL provided in datasheet Table 7.6 which is 1 uS. Switching to 100khz gives us 5 uS/5 uS high/low which both fall above the minimum given values for 100 khz, 4.0 uS/4.7 uS high/low.

Without this patch occasionally a voltage set operation from the kernel will appear to have worked but the actual voltage reflected on the PMIC will not have updated, causing problems especially with cpufreq that may update to a higher OPP without actually raising the voltage on DCDC2, leading to a hang.

Signed-off-by: Dave Gerlach d-gerlach@ti.com Signed-off-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/am43x-epos-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index a74b09f17a1a..e7cd99793bc6 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -411,7 +411,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; - clock-frequency = <400000>; + clock-frequency = <100000>;

tps65218: tps65218@24 { reg = <0x24>;

From: Harshvardhan Jha harshvardhan.jha@oracle.com

[ Upstream commit 77541f78eadfe9fdb018a7b8b69f0f2af2cf4b82 ]

The list_for_each_entry() iterator, "adapter" in this code, can never be NULL. If we exit the loop without finding the correct adapter then "adapter" points invalid memory that is an offset from the list head. This will eventually lead to memory corruption and presumably a kernel crash.

Link: https://lore.kernel.org/r/20210708074642.23599-1-harshvardhan.jha@oracle.com Acked-by: Sumit Saxena sumit.saxena@broadcom.com Signed-off-by: Harshvardhan Jha harshvardhan.jha@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/megaraid/megaraid_mm.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c index a70692779a16..34067dfd2841 100644 --- a/drivers/scsi/megaraid/megaraid_mm.c +++ b/drivers/scsi/megaraid/megaraid_mm.c @@ -246,7 +246,7 @@ mraid_mm_get_adapter(mimd_t __user *umimd, int *rval) mimd_t mimd; uint32_t adapno; int iterator; - + bool is_found;

if (copy_from_user(&mimd, umimd, sizeof(mimd_t))) { *rval = -EFAULT; @@ -262,12 +262,16 @@ mraid_mm_get_adapter(mimd_t __user *umimd, int *rval)

adapter = NULL; iterator = 0; + is_found = false;

list_for_each_entry(adapter, &adapters_list_g, list) { - if (iterator++ == adapno) break; + if (iterator++ == adapno) { + is_found = true; + break; + } }

- if (!adapter) { + if (!is_found) { *rval = -ENODEV; return NULL; } @@ -735,6 +739,7 @@ ioctl_done(uioc_t *kioc) uint32_t adapno; int iterator; mraid_mmadp_t* adapter; + bool is_found;

/* * When the kioc returns from driver, make sure it still doesn't @@ -757,19 +762,23 @@ ioctl_done(uioc_t *kioc) iterator = 0; adapter = NULL; adapno = kioc->adapno; + is_found = false;

con_log(CL_ANN, ( KERN_WARNING "megaraid cmm: completed " "ioctl that was timedout before\n"));

list_for_each_entry(adapter, &adapters_list_g, list) { - if (iterator++ == adapno) break; + if (iterator++ == adapno) { + is_found = true; + break; + } }

kioc->timedout = 0;

- if (adapter) { + if (is_found) mraid_mm_dealloc_kioc( adapter, kioc ); - } + } else { wake_up(&wait_q);

From: Ole Bjørn Midtbø omidtbo@cisco.com

[ Upstream commit cca342d98bef68151a80b024f7bf5f388d1fbdea ]

A different wait queue was used when removing ctrl_wait than when adding it. This effectively made the remove operation without locking compared to other operations on the wait queue ctrl_wait was part of. This caused issues like below where dead000000000100 is LIST_POISON1 and dead000000000200 is LIST_POISON2.

list_add corruption. next->prev should be prev (ffffffc1b0a33a08), \ but was dead000000000200. (next=ffffffc03ac77de0). ------------[ cut here ]------------ CPU: 3 PID: 2138 Comm: bluetoothd Tainted: G O 4.4.238+ #9 ... ---[ end trace 0adc2158f0646eac ]--- Call trace: [<ffffffc000443f78>] __list_add+0x38/0xb0 [<ffffffc0000f0d04>] add_wait_queue+0x4c/0x68 [<ffffffc00020eecc>] __pollwait+0xec/0x100 [<ffffffc000d1556c>] bt_sock_poll+0x74/0x200 [<ffffffc000bdb8a8>] sock_poll+0x110/0x128 [<ffffffc000210378>] do_sys_poll+0x220/0x480 [<ffffffc0002106f0>] SyS_poll+0x80/0x138 [<ffffffc00008510c>] __sys_trace_return+0x0/0x4

Unable to handle kernel paging request at virtual address dead000000000100 ... CPU: 4 PID: 5387 Comm: kworker/u15:3 Tainted: G W O 4.4.238+ #9 ... Call trace: [<ffffffc0000f079c>] __wake_up_common+0x7c/0xa8 [<ffffffc0000f0818>] __wake_up+0x50/0x70 [<ffffffc000be11b0>] sock_def_wakeup+0x58/0x60 [<ffffffc000de5e10>] l2cap_sock_teardown_cb+0x200/0x224 [<ffffffc000d3f2ac>] l2cap_chan_del+0xa4/0x298 [<ffffffc000d45ea0>] l2cap_conn_del+0x118/0x198 [<ffffffc000d45f8c>] l2cap_disconn_cfm+0x6c/0x78 [<ffffffc000d29934>] hci_event_packet+0x564/0x2e30 [<ffffffc000d19b0c>] hci_rx_work+0x10c/0x360 [<ffffffc0000c2218>] process_one_work+0x268/0x460 [<ffffffc0000c2678>] worker_thread+0x268/0x480 [<ffffffc0000c94e0>] kthread+0x118/0x128 [<ffffffc000085070>] ret_from_fork+0x10/0x20 ---[ end trace 0adc2158f0646ead ]---

Signed-off-by: Ole Bjørn Midtbø omidtbo@cisco.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/hidp/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 552e00b07196..9ec37c6c8c4a 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -1282,7 +1282,7 @@ static int hidp_session_thread(void *arg)

/* cleanup runtime environment */ remove_wait_queue(sk_sleep(session->intr_sock->sk), &intr_wait); - remove_wait_queue(sk_sleep(session->intr_sock->sk), &ctrl_wait); + remove_wait_queue(sk_sleep(session->ctrl_sock->sk), &ctrl_wait); wake_up_interruptible(&session->report_queue); hidp_del_timer(session);

From: Pavel Skripkin paskripkin@gmail.com

[ Upstream commit 19d1532a187669ce86d5a2696eb7275310070793 ]

Syzbot reported slab-out-of bounds write in decode_data(). The problem was in missing validation checks.

Syzbot's reproducer generated malicious input, which caused decode_data() to be called a lot in sixpack_decode(). Since rx_count_cooked is only 400 bytes and noone reported before, that 400 bytes is not enough, let's just check if input is malicious and complain about buffer overrun.

Fail log: ================================================================== BUG: KASAN: slab-out-of-bounds in drivers/net/hamradio/6pack.c:843 Write of size 1 at addr ffff888087c5544e by task kworker/u4:0/7

CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.6.0-rc3-syzkaller #0 ... Workqueue: events_unbound flush_to_ldisc Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:641 __asan_report_store1_noabort+0x17/0x20 mm/kasan/generic_report.c:137 decode_data.part.0+0x23b/0x270 drivers/net/hamradio/6pack.c:843 decode_data drivers/net/hamradio/6pack.c:965 [inline] sixpack_decode drivers/net/hamradio/6pack.c:968 [inline]

Reported-and-tested-by: syzbot+fc8cd9a673d4577fb2e4@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Pavel Skripkin paskripkin@gmail.com Reviewed-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/hamradio/6pack.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 732c68ed166a..cce901add654 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -874,6 +874,12 @@ static void decode_data(struct sixpack *sp, unsigned char inbyte) return; }

+ if (sp->rx_count_cooked + 2 >= sizeof(sp->cooked_buf)) { + pr_err("6pack: cooked buffer overrun, data loss\n"); + sp->rx_count = 0; + return; + } + buf = sp->raw_buf; sp->cooked_buf[sp->rx_count_cooked++] = buf[0] | ((buf[1] << 2) & 0xc0);

From: Doug Anderson dianders@chromium.org

[ Upstream commit 46d179525a1f6d16957dcb4624517bc04142b3e7 ]

According to the DesignWare state machine description, after we get a "response error" or "response CRC error" we move into data transfer mode. That means that we don't necessarily need to special case trying to deal with the failure right away. We can wait until we are notified that the data transfer is complete (with or without errors) and then we can deal with the failure.

It may sound strange to defer dealing with a command that we know will fail anyway, but this appears to fix a bug. During tuning (CMD19) on a specific card on an rk3288-based system, we found that we could get a "response CRC error". Sending the stop command after the "response CRC error" would then throw the system into a confused state causing all future tuning phases to report failure.

When in the confused state, the controller would show these (hex codes are interrupt status register): CMD ERR: 0x00000046 (cmd=19) CMD ERR: 0x0000004e (cmd=12) DATA ERR: 0x00000208 DATA ERR: 0x0000020c CMD ERR: 0x00000104 (cmd=19) CMD ERR: 0x00000104 (cmd=12) DATA ERR: 0x00000208 DATA ERR: 0x0000020c ... ...

It is inherently difficult to deal with the complexity of trying to correctly send a stop command while a data transfer is taking place since you need to deal with different corner cases caused by the fact that the data transfer could complete (with errors or without errors) during various places in sending the stop command (dw_mci_stop_dma, send_stop_abort, etc)

Instead of adding a bunch of extra complexity to deal with this, it seems much simpler to just use the more straightforward (and less error-prone) path of letting the data transfer finish. There shouldn't be any huge benefit to sending the stop command slightly earlier, anyway.

Signed-off-by: Doug Anderson dianders@chromium.org Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com Cc: Alim Akhtar alim.akhtar@gmail.com Signed-off-by: Jaehoon Chung jh80.chung@samsung.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/dw_mmc.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 581f5d0271f4..afdf539e06e9 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1744,6 +1744,33 @@ static void dw_mci_tasklet_func(unsigned long priv) }

if (cmd->data && err) { + /* + * During UHS tuning sequence, sending the stop + * command after the response CRC error would + * throw the system into a confused state + * causing all future tuning phases to report + * failure. + * + * In such case controller will move into a data + * transfer state after a response error or + * response CRC error. Let's let that finish + * before trying to send a stop, so we'll go to + * STATE_SENDING_DATA. + * + * Although letting the data transfer take place + * will waste a bit of time (we already know + * the command was bad), it can't cause any + * errors since it's possible it would have + * taken place anyway if this tasklet got + * delayed. Allowing the transfer to take place + * avoids races and keeps things simple. + */ + if ((err != -ETIMEDOUT) && + (cmd->opcode == MMC_SEND_TUNING_BLOCK)) { + state = STATE_SENDING_DATA; + continue; + } + dw_mci_stop_dma(host); send_stop_abort(host, data); state = STATE_SENDING_STOP;

From: Vincent Whitchurch vincent.whitchurch@axis.com

[ Upstream commit 25f8203b4be1937c4939bb98623e67dcfd7da4d1 ]

When a Data CRC interrupt is received, the driver disables the DMA, then sends the stop/abort command and then waits for Data Transfer Over.

However, sometimes, when a data CRC error is received in the middle of a multi-block write transfer, the Data Transfer Over interrupt is never received, and the driver hangs and never completes the request.

The driver sets the BMOD.SWR bit (SDMMC_IDMAC_SWRESET) when stopping the DMA, but according to the manual CMD.STOP_ABORT_CMD should be programmed "before assertion of SWR". Do these operations in the recommended order. With this change the Data Transfer Over is always received correctly in my tests.

Signed-off-by: Vincent Whitchurch vincent.whitchurch@axis.com Reviewed-by: Jaehoon Chung jh80.chung@samsung.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210630102232.16011-1-vincent.whitchurch@axis.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/dw_mmc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 72ab0623293c..7bfe9ce03944 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1768,8 +1768,8 @@ static void dw_mci_tasklet_func(unsigned long priv) continue; }

- dw_mci_stop_dma(host); send_stop_abort(host, data); + dw_mci_stop_dma(host); state = STATE_SENDING_STOP; break; } @@ -1793,10 +1793,10 @@ static void dw_mci_tasklet_func(unsigned long priv) */ if (test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)) { - dw_mci_stop_dma(host); if (!(host->data_status & (SDMMC_INT_DRTO | SDMMC_INT_EBE))) send_stop_abort(host, data); + dw_mci_stop_dma(host); state = STATE_DATA_ERROR; break; } @@ -1830,10 +1830,10 @@ static void dw_mci_tasklet_func(unsigned long priv) */ if (test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)) { - dw_mci_stop_dma(host); if (!(host->data_status & (SDMMC_INT_DRTO | SDMMC_INT_EBE))) send_stop_abort(host, data); + dw_mci_stop_dma(host); state = STATE_DATA_ERROR; break; }

From: Dongliang Mu mudongliangabcd@gmail.com

[ Upstream commit 57a1681095f912239c7fb4d66683ab0425973838 ]

The function tpci200_register called by tpci200_install and tpci200_unregister called by tpci200_uninstall are in pair. However, tpci200_unregister has some cleanup operations not in the tpci200_register. So the error handling code of tpci200_pci_probe has many different double free issues.

Fix this problem by moving those cleanup operations out of tpci200_unregister, into tpci200_pci_remove and reverting the previous commit 9272e5d0028d ("ipack/carriers/tpci200: Fix a double free in tpci200_pci_probe").

Fixes: 9272e5d0028d ("ipack/carriers/tpci200: Fix a double free in tpci200_pci_probe") Cc: stable@vger.kernel.org Reported-by: Dongliang Mu mudongliangabcd@gmail.com Signed-off-by: Dongliang Mu mudongliangabcd@gmail.com Link: https://lore.kernel.org/r/20210810100323.3938492-1-mudongliangabcd@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ipack/carriers/tpci200.c | 36 ++++++++++++++++---------------- 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/ipack/carriers/tpci200.c b/drivers/ipack/carriers/tpci200.c index 7ba1a94497f5..4294523bede5 100644 --- a/drivers/ipack/carriers/tpci200.c +++ b/drivers/ipack/carriers/tpci200.c @@ -94,16 +94,13 @@ static void tpci200_unregister(struct tpci200_board *tpci200) free_irq(tpci200->info->pdev->irq, (void *) tpci200);

pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs); - pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs);

pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR); pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR); pci_release_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR); pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR); - pci_release_region(tpci200->info->pdev, TPCI200_CFG_MEM_BAR);

pci_disable_device(tpci200->info->pdev); - pci_dev_put(tpci200->info->pdev); }

static void tpci200_enable_irq(struct tpci200_board *tpci200, @@ -524,7 +521,7 @@ static int tpci200_pci_probe(struct pci_dev *pdev, tpci200->info = kzalloc(sizeof(struct tpci200_infos), GFP_KERNEL); if (!tpci200->info) { ret = -ENOMEM; - goto out_err_info; + goto err_tpci200; }

pci_dev_get(pdev); @@ -535,7 +532,7 @@ static int tpci200_pci_probe(struct pci_dev *pdev, if (ret) { dev_err(&pdev->dev, "Failed to allocate PCI Configuration Memory"); ret = -EBUSY; - goto out_err_pci_request; + goto err_tpci200_info; } tpci200->info->cfg_regs = ioremap_nocache( pci_resource_start(pdev, TPCI200_CFG_MEM_BAR), @@ -543,7 +540,7 @@ static int tpci200_pci_probe(struct pci_dev *pdev, if (!tpci200->info->cfg_regs) { dev_err(&pdev->dev, "Failed to map PCI Configuration Memory"); ret = -EFAULT; - goto out_err_ioremap; + goto err_request_region; }

/* Disable byte swapping for 16 bit IP module access. This will ensure @@ -566,7 +563,7 @@ static int tpci200_pci_probe(struct pci_dev *pdev, if (ret) { dev_err(&pdev->dev, "error during tpci200 install\n"); ret = -ENODEV; - goto out_err_install; + goto err_cfg_regs; }

/* Register the carrier in the industry pack bus driver */ @@ -578,7 +575,7 @@ static int tpci200_pci_probe(struct pci_dev *pdev, dev_err(&pdev->dev, "error registering the carrier on ipack driver\n"); ret = -EFAULT; - goto out_err_bus_register; + goto err_tpci200_install; }

/* save the bus number given by ipack to logging purpose */ @@ -589,19 +586,16 @@ static int tpci200_pci_probe(struct pci_dev *pdev, tpci200_create_device(tpci200, i); return 0;

-out_err_bus_register: +err_tpci200_install: tpci200_uninstall(tpci200); - /* tpci200->info->cfg_regs is unmapped in tpci200_uninstall */ - tpci200->info->cfg_regs = NULL; -out_err_install: - if (tpci200->info->cfg_regs) - iounmap(tpci200->info->cfg_regs); -out_err_ioremap: +err_cfg_regs: + pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs); +err_request_region: pci_release_region(pdev, TPCI200_CFG_MEM_BAR); -out_err_pci_request: - pci_dev_put(pdev); +err_tpci200_info: kfree(tpci200->info); -out_err_info: + pci_dev_put(pdev); +err_tpci200: kfree(tpci200); return ret; } @@ -611,6 +605,12 @@ static void __tpci200_pci_remove(struct tpci200_board *tpci200) ipack_bus_unregister(tpci200->info->ipack_bus); tpci200_uninstall(tpci200);

+ pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs); + + pci_release_region(tpci200->info->pdev, TPCI200_CFG_MEM_BAR); + + pci_dev_put(tpci200->info->pdev); + kfree(tpci200->info); kfree(tpci200); }

Signed-off-by: Sasha Levin sashal@kernel.org --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Makefile b/Makefile index abc388047b47..6de2701bdca0 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 4 -SUBLEVEL = 281 -EXTRAVERSION = +SUBLEVEL = 282 +EXTRAVERSION = -rc1 NAME = Blurry Fish Butt

# *DOCUMENTATION*