[PATCH AUTOSEL 6.6 01/18] net: mac802154: Fix racy device stats updates by DEV_STATS_INC() and DEV_STATS_ADD()
From: Yunshui Jiang jiangyunshui@kylinos.cn
[ Upstream commit b8ec0dc3845f6c9089573cb5c2c4b05f7fc10728 ]
mac802154 devices update their dev->stats fields locklessly. Therefore these counters should be updated atomically. Adopt SMP safe DEV_STATS_INC() and DEV_STATS_ADD() to achieve this.
Signed-off-by: Yunshui Jiang jiangyunshui@kylinos.cn Message-ID: 20240531080739.2608969-1-jiangyunshui@kylinos.cn Signed-off-by: Stefan Schmidt stefan@datenfreihafen.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac802154/tx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/net/mac802154/tx.c b/net/mac802154/tx.c index 2a6f1ed763c9b..6fbed5bb5c3e0 100644 --- a/net/mac802154/tx.c +++ b/net/mac802154/tx.c @@ -34,8 +34,8 @@ void ieee802154_xmit_sync_worker(struct work_struct *work) if (res) goto err_tx;
- dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; + DEV_STATS_INC(dev, tx_packets); + DEV_STATS_ADD(dev, tx_bytes, skb->len);
ieee802154_xmit_complete(&local->hw, skb, false);
@@ -90,8 +90,8 @@ ieee802154_tx(struct ieee802154_local *local, struct sk_buff *skb) if (ret) goto err_wake_netif_queue;
- dev->stats.tx_packets++; - dev->stats.tx_bytes += len; + DEV_STATS_INC(dev, tx_packets); + DEV_STATS_ADD(dev, tx_bytes, len); } else { local->tx_skb = skb; queue_work(local->workqueue, &local->sync_tx_work);
From: Anjali K anjalik@linux.ibm.com
[ Upstream commit 1a14150e1656f7a332a943154fc486504db4d586 ]
Reading the dispatch trace log from /sys/kernel/debug/powerpc/dtl/cpu-* results in a BUG() when the config CONFIG_HARDENED_USERCOPY is enabled as shown below.
kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth pseries_wdt dm_multipath dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 27 PID: 1815 Comm: python3 Not tainted 6.10.0-rc3 #85 Hardware name: IBM,9040-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_042) hv:phyp pSeries NIP: c0000000005d23d4 LR: c0000000005d23d0 CTR: 00000000006ee6f8 REGS: c000000120c078c0 TRAP: 0700 Not tainted (6.10.0-rc3) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 2828220f XER: 0000000e CFAR: c0000000001fdc80 IRQMASK: 0 [ ... GPRs omitted ... ] NIP [c0000000005d23d4] usercopy_abort+0x78/0xb0 LR [c0000000005d23d0] usercopy_abort+0x74/0xb0 Call Trace: usercopy_abort+0x74/0xb0 (unreliable) __check_heap_object+0xf8/0x120 check_heap_object+0x218/0x240 __check_object_size+0x84/0x1a4 dtl_file_read+0x17c/0x2c4 full_proxy_read+0x8c/0x110 vfs_read+0xdc/0x3a0 ksys_read+0x84/0x144 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec --- interrupt: 3000 at 0x7fff81f3ab34
Commit 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0") requires that only whitelisted areas in slab/slub objects can be copied to userspace when usercopy hardening is enabled using CONFIG_HARDENED_USERCOPY. Dtl contains hypervisor dispatch events which are expected to be read by privileged users. Hence mark this safe for user access. Specify useroffset=0 and usersize=DISPATCH_LOG_BYTES to whitelist the entire object.
Co-developed-by: Vishal Chourasia vishalc@linux.ibm.com Signed-off-by: Vishal Chourasia vishalc@linux.ibm.com Signed-off-by: Anjali K anjalik@linux.ibm.com Reviewed-by: Srikar Dronamraju srikar@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://msgid.link/20240614173844.746818-1-anjalik@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/platforms/pseries/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index ecea85c74c43f..abc086b53e017 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -343,8 +343,8 @@ static int alloc_dispatch_log_kmem_cache(void) { void (*ctor)(void *) = get_dtl_cache_ctor();
- dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES, - DISPATCH_LOG_BYTES, 0, ctor); + dtl_cache = kmem_cache_create_usercopy("dtl", DISPATCH_LOG_BYTES, + DISPATCH_LOG_BYTES, 0, 0, DISPATCH_LOG_BYTES, ctor); if (!dtl_cache) { pr_warn("Failed to create dispatch trace log buffer cache\n"); pr_warn("Stolen time statistics will be unreliable\n");
From: Ganesh Goudar ganeshgr@linux.ibm.com
[ Upstream commit a1216e62d039bf63a539bbe718536ec789a853dd ]
If a PCI device is removed during eeh_pe_report_edev(), edev->pdev will change and can cause a crash, hold the PCI rescan/remove lock while taking a copy of edev->pdev->bus.
Signed-off-by: Ganesh Goudar ganeshgr@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://msgid.link/20240617140240.580453-1-ganeshgr@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/eeh_pe.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c index e0ce812796241..7d1b50599dd6c 100644 --- a/arch/powerpc/kernel/eeh_pe.c +++ b/arch/powerpc/kernel/eeh_pe.c @@ -849,6 +849,7 @@ struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe) { struct eeh_dev *edev; struct pci_dev *pdev; + struct pci_bus *bus = NULL;
if (pe->type & EEH_PE_PHB) return pe->phb->bus; @@ -859,9 +860,11 @@ struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe)
/* Retrieve the parent PCI bus of first (top) PCI device */ edev = list_first_entry_or_null(&pe->edevs, struct eeh_dev, entry); + pci_lock_rescan_remove(); pdev = eeh_dev_to_pci_dev(edev); if (pdev) - return pdev->bus; + bus = pdev->bus; + pci_unlock_rescan_remove();
- return NULL; + return bus; }
From: Xingui Yang yangxingui@huawei.com
[ Upstream commit ab2068a6fb84751836a84c26ca72b3beb349619d ]
The expander phy will be treated as broadcast flutter in the next revalidation after the exp-attached end device probe failed, as follows:
[78779.654026] sas: broadcast received: 0 [78779.654037] sas: REVALIDATING DOMAIN on port 0, pid:10 [78779.654680] sas: ex 500e004aaaaaaa1f phy05 change count has changed [78779.662977] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE) [78779.662986] sas: ex 500e004aaaaaaa1f phy05 new device attached [78779.663079] sas: ex 500e004aaaaaaa1f phy05:U:8 attached: 500e004aaaaaaa05 (stp) [78779.693542] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] found [78779.701155] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0 [78779.707864] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 ... [78835.161307] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [78835.171344] sas: sas_probe_sata: for exp-attached device 500e004aaaaaaa05 returned -19 [78835.180879] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] is gone [78835.187487] sas: broadcast received: 0 [78835.187504] sas: REVALIDATING DOMAIN on port 0, pid:10 [78835.188263] sas: ex 500e004aaaaaaa1f phy05 change count has changed [78835.195870] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE) [78835.195875] sas: ex 500e004aaaaaaa1f rediscovering phy05 [78835.196022] sas: ex 500e004aaaaaaa1f phy05:U:A attached: 500e004aaaaaaa05 (stp) [78835.196026] sas: ex 500e004aaaaaaa1f phy05 broadcast flutter [78835.197615] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0
The cause of the problem is that the related ex_phy's attached_sas_addr was not cleared after the end device probe failed, so reset it.
Signed-off-by: Xingui Yang yangxingui@huawei.com Link: https://lore.kernel.org/r/20240619091742.25465-1-yangxingui@huawei.com Reviewed-by: John Garry john.g.garry@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/libsas/sas_internal.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index a6dc7dc07fce3..277e45fed85d6 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -133,6 +133,20 @@ static inline void sas_fail_probe(struct domain_device *dev, const char *func, i func, dev->parent ? "exp-attached" : "direct-attached", SAS_ADDR(dev->sas_addr), err); + + /* + * If the device probe failed, the expander phy attached address + * needs to be reset so that the phy will not be treated as flutter + * in the next revalidation + */ + if (dev->parent && !dev_is_expander(dev->dev_type)) { + struct sas_phy *phy = dev->phy; + struct domain_device *parent = dev->parent; + struct ex_phy *ex_phy = &parent->ex_dev.ex_phy[phy->number]; + + memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE); + } + sas_unregister_dev(dev->port, dev); }
From: Mark-PK Tsai mark-pk.tsai@mediatek.com
[ Upstream commit e0556255a53d6d3d406a28362dffd972018a997c ]
The 'missing-field-initializers' warning was reported when building with W=2. This patch use designated initializers for 'struct ffa_send_direct_data' to suppress the warning and clarify the initialization intent.
Signed-off-by: ming-jen.chang ming-jen.chang@mediatek.com Signed-off-by: Mark-PK Tsai mark-pk.tsai@mediatek.com Signed-off-by: Jens Wiklander jens.wiklander@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tee/optee/ffa_abi.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c index 0828240f27e62..b8ba360e863ed 100644 --- a/drivers/tee/optee/ffa_abi.c +++ b/drivers/tee/optee/ffa_abi.c @@ -657,7 +657,9 @@ static bool optee_ffa_api_is_compatbile(struct ffa_device *ffa_dev, const struct ffa_ops *ops) { const struct ffa_msg_ops *msg_ops = ops->msg_ops; - struct ffa_send_direct_data data = { OPTEE_FFA_GET_API_VERSION }; + struct ffa_send_direct_data data = { + .data0 = OPTEE_FFA_GET_API_VERSION, + }; int rc;
msg_ops->mode_32bit_set(ffa_dev); @@ -674,7 +676,9 @@ static bool optee_ffa_api_is_compatbile(struct ffa_device *ffa_dev, return false; }
- data = (struct ffa_send_direct_data){ OPTEE_FFA_GET_OS_VERSION }; + data = (struct ffa_send_direct_data){ + .data0 = OPTEE_FFA_GET_OS_VERSION, + }; rc = msg_ops->sync_send_receive(ffa_dev, &data); if (rc) { pr_err("Unexpected error %d\n", rc); @@ -694,7 +698,9 @@ static bool optee_ffa_exchange_caps(struct ffa_device *ffa_dev, u32 *sec_caps, unsigned int *rpc_param_count) { - struct ffa_send_direct_data data = { OPTEE_FFA_EXCHANGE_CAPABILITIES }; + struct ffa_send_direct_data data = { + .data0 = OPTEE_FFA_EXCHANGE_CAPABILITIES, + }; int rc;
rc = ops->msg_ops->sync_send_receive(ffa_dev, &data);
From: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp
[ Upstream commit 0d151a103775dd9645c78c97f77d6e2a5298d913 ]
syzbot is reporting that calling hci_release_dev() from hci_error_reset() due to hci_dev_put() from hci_error_reset() can cause deadlock at destroy_workqueue(), for hci_error_reset() is called from hdev->req_workqueue which destroy_workqueue() needs to flush.
We need to make sure that hdev->{rx_work,cmd_work,tx_work} which are queued into hdev->workqueue and hdev->{power_on,error_reset} which are queued into hdev->req_workqueue are no longer running by the moment
destroy_workqueue(hdev->workqueue); destroy_workqueue(hdev->req_workqueue);
are called from hci_release_dev().
Call cancel_work_sync() on these work items from hci_unregister_dev() as soon as hdev->list is removed from hci_dev_list.
Reported-by: syzbot syzbot+da0a9c9721e36db712e8@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=da0a9c9721e36db712e8 Signed-off-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/hci_core.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 3817d6369f0cc..b4d5b7200ff9c 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -2704,7 +2704,11 @@ void hci_unregister_dev(struct hci_dev *hdev) list_del(&hdev->list); write_unlock(&hci_dev_list_lock);
+ cancel_work_sync(&hdev->rx_work); + cancel_work_sync(&hdev->cmd_work); + cancel_work_sync(&hdev->tx_work); cancel_work_sync(&hdev->power_on); + cancel_work_sync(&hdev->error_reset);
hci_cmd_sync_clear(hdev);
From: Neeraj Sanjay Kale neeraj.sanjaykale@nxp.com
[ Upstream commit 4183a7be77009fc31c5760429fe095f163bf96a9 ]
This sets the default power save mode setting to enabled.
The power save feature is now stable and stress test issues, such as the TX timeout error, have been resolved. commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test")
With this setting, the driver will send the vendor command to FW at startup, to enable power save feature.
User can disable this feature using the following vendor command: hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)
Signed-off-by: Neeraj Sanjay Kale neeraj.sanjaykale@nxp.com Reviewed-by: Paul Menzel pmenzel@molgen.mpg.de Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bluetooth/btnxpuart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c index abccd571cf3ee..5c5a5b752419e 100644 --- a/drivers/bluetooth/btnxpuart.c +++ b/drivers/bluetooth/btnxpuart.c @@ -280,7 +280,7 @@ static u8 crc8_table[CRC8_TABLE_SIZE];
/* Default configurations */ #define DEFAULT_H2C_WAKEUP_MODE WAKEUP_METHOD_BREAK -#define DEFAULT_PS_MODE PS_MODE_DISABLE +#define DEFAULT_PS_MODE PS_MODE_ENABLE #define FW_INIT_BAUDRATE HCI_NXP_PRI_BAUDRATE
static struct sk_buff *nxp_drv_send_cmd(struct hci_dev *hdev, u16 opcode,
From: Edward Adam Davis eadavis@qq.com
[ Upstream commit 89e856e124f9ae548572c56b1b70c2255705f8fe ]
The problem occurs between the system call to close the sock and hci_rx_work, where the former releases the sock and the latter accesses it without lock protection.
CPU0 CPU1 ---- ---- sock_close hci_rx_work l2cap_sock_release hci_acldata_packet l2cap_sock_kill l2cap_recv_frame sk_free l2cap_conless_channel l2cap_sock_recv_cb
If hci_rx_work processes the data that needs to be received before the sock is closed, then everything is normal; Otherwise, the work thread may access the released sock when receiving data.
Add a chan mutex in the rx callback of the sock to achieve synchronization between the sock release and recv cb.
Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer.
Reported-and-tested-by: syzbot+b7f6f8c9303466e16c8a@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis eadavis@qq.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/l2cap_sock.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index 97d0a0f5829a6..ae19d5deba3ae 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -1250,6 +1250,10 @@ static void l2cap_sock_kill(struct sock *sk)
BT_DBG("sk %p state %s", sk, state_to_string(sk->sk_state));
+ /* Sock is dead, so set chan data to NULL, avoid other task use invalid + * sock pointer. + */ + l2cap_pi(sk)->chan->data = NULL; /* Kill poor orphan */
l2cap_chan_put(l2cap_pi(sk)->chan); @@ -1492,12 +1496,25 @@ static struct l2cap_chan *l2cap_sock_new_connection_cb(struct l2cap_chan *chan)
static int l2cap_sock_recv_cb(struct l2cap_chan *chan, struct sk_buff *skb) { - struct sock *sk = chan->data; - struct l2cap_pinfo *pi = l2cap_pi(sk); + struct sock *sk; + struct l2cap_pinfo *pi; int err;
- lock_sock(sk); + /* To avoid race with sock_release, a chan lock needs to be added here + * to synchronize the sock. + */ + l2cap_chan_hold(chan); + l2cap_chan_lock(chan); + sk = chan->data;
+ if (!sk) { + l2cap_chan_unlock(chan); + l2cap_chan_put(chan); + return -ENXIO; + } + + pi = l2cap_pi(sk); + lock_sock(sk); if (chan->mode == L2CAP_MODE_ERTM && !list_empty(&pi->rx_busy)) { err = -ENOMEM; goto done; @@ -1546,6 +1563,8 @@ static int l2cap_sock_recv_cb(struct l2cap_chan *chan, struct sk_buff *skb)
done: release_sock(sk); + l2cap_chan_unlock(chan); + l2cap_chan_put(chan);
return err; }
From: Gao Xiang hsiangkao@linux.alibaba.com
[ Upstream commit 9b32b063be1001e322c5f6e01f2a649636947851 ]
Sometimes, the on-disk metadata might be invalid due to user interrupts, storage failures, or other unknown causes.
In that case, z_erofs_map_blocks_iter() may still return a valid m_llen while other fields remain invalid (e.g., m_plen can be 0).
Due to the return value of z_erofs_scan_folio() in some path will be ignored on purpose, the following z_erofs_scan_folio() could then use the invalid value by accident.
Let's reset m_llen to 0 to prevent this.
Link: https://lore.kernel.org/r/20240629185743.2819229-1-hsiangkao@linux.alibaba.c... Signed-off-by: Gao Xiang hsiangkao@linux.alibaba.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/erofs/zmap.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/fs/erofs/zmap.c b/fs/erofs/zmap.c index e313c936351d5..6bd435a565f61 100644 --- a/fs/erofs/zmap.c +++ b/fs/erofs/zmap.c @@ -723,6 +723,8 @@ int z_erofs_map_blocks_iter(struct inode *inode, struct erofs_map_blocks *map,
err = z_erofs_do_map_blocks(inode, map, flags); out: + if (err) + map->m_llen = 0; trace_z_erofs_map_blocks_iter_exit(inode, map, flags, err); return err; }
From: Tom Chung chiahsuan.chung@amd.com
[ Upstream commit 6b8487cdf9fc7bae707519ac5b5daeca18d1e85b ]
[Why] Sometimes the new_crtc_state->vrr_infopacket did not sync up with the current state. It will affect the update_freesync_state_on_stream() does not update the state correctly.
[How] Reset the freesync config before get_freesync_config_for_crtc() to make sure we have the correct new_crtc_state for VRR.
Reviewed-by: Sun peng Li sunpeng.li@amd.com Signed-off-by: Jerry Zuo jerry.zuo@amd.com Signed-off-by: Tom Chung chiahsuan.chung@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 7ed6bb61fe0ad..a1acc8108586f 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -9517,6 +9517,7 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm, }
/* Update Freesync settings. */ + reset_freesync_config_for_crtc(dm_new_crtc_state); get_freesync_config_for_crtc(dm_new_crtc_state, dm_new_conn_state);
From: Tom Chung chiahsuan.chung@amd.com
[ Upstream commit 74ad26b36d303ac233eccadc5c3a8d7ee4709f31 ]
[Why] We only enable the VRR while monitor usable refresh rate range is greater than 10 Hz. But we did not check the range in DRM_EDID_FEATURE_CONTINUOUS_FREQ case.
[How] Add a refresh rate range check before set the freesync_capable flag in DRM_EDID_FEATURE_CONTINUOUS_FREQ case.
Reviewed-by: Mario Limonciello mario.limonciello@amd.com Reviewed-by: Rodrigo Siqueira rodrigo.siqueira@amd.com Signed-off-by: Jerry Zuo jerry.zuo@amd.com Signed-off-by: Tom Chung chiahsuan.chung@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index a1acc8108586f..023fd3945e47a 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -10760,9 +10760,11 @@ void amdgpu_dm_update_freesync_caps(struct drm_connector *connector, if (is_dp_capable_without_timing_msa(adev->dm.dc, amdgpu_dm_connector)) { if (edid->features & DRM_EDID_FEATURE_CONTINUOUS_FREQ) { - freesync_capable = true; amdgpu_dm_connector->min_vfreq = connector->display_info.monitor_range.min_vfreq; amdgpu_dm_connector->max_vfreq = connector->display_info.monitor_range.max_vfreq; + if (amdgpu_dm_connector->max_vfreq - + amdgpu_dm_connector->min_vfreq > 10) + freesync_capable = true; } else { edid_check_required = edid->version > 1 || (edid->version == 1 &&
From: Alvin Lee alvin.lee2@amd.com
[ Upstream commit 074b3a886713f69d98d30bb348b1e4cb3ce52b22 ]
[Description] We need to ensure to take into account cursor prefetch BW in mode support or we may pass ModeQuery but fail an actual flip which will cause a hang. Flip may fail because the cursor_pre_bw is populated during mode programming (and mode programming is never called prior to ModeQuery).
Reviewed-by: Chaitanya Dhere chaitanya.dhere@amd.com Reviewed-by: Nevenko Stupar nevenko.stupar@amd.com Signed-off-by: Jerry Zuo jerry.zuo@amd.com Signed-off-by: Alvin Lee alvin.lee2@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c index 6c84b0fa40f44..0782a34689a00 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c @@ -3364,6 +3364,9 @@ void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l &mode_lib->vba.UrgentBurstFactorLumaPre[k], &mode_lib->vba.UrgentBurstFactorChromaPre[k], &mode_lib->vba.NotUrgentLatencyHidingPre[k]); + + v->cursor_bw_pre[k] = mode_lib->vba.NumberOfCursors[k] * mode_lib->vba.CursorWidth[k][0] * mode_lib->vba.CursorBPP[k][0] / + 8.0 / (mode_lib->vba.HTotal[k] / mode_lib->vba.PixelClock[k]) * v->VRatioPreY[i][j][k]; }
{
From: Tom Chung chiahsuan.chung@amd.com
[ Upstream commit 9ef1548aeaa8858e7aee2152bf95cc71cdcd6dff ]
[Why] Some of the panels does not have the refresh rate range info in base EDID and only have the refresh rate range info in DisplayID block. It will cause the max/min freesync refresh rate set to 0.
[How] Try to parse the refresh rate range info from DisplayID if the max/min refresh rate is 0.
Reviewed-by: Sun peng Li sunpeng.li@amd.com Signed-off-by: Jerry Zuo jerry.zuo@amd.com Signed-off-by: Tom Chung chiahsuan.chung@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 023fd3945e47a..e7664a39bfceb 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -10631,6 +10631,49 @@ static bool parse_edid_cea(struct amdgpu_dm_connector *aconnector, return ret; }
+static void parse_edid_displayid_vrr(struct drm_connector *connector, + struct edid *edid) +{ + u8 *edid_ext = NULL; + int i; + int j = 0; + u16 min_vfreq; + u16 max_vfreq; + + if (edid == NULL || edid->extensions == 0) + return; + + /* Find DisplayID extension */ + for (i = 0; i < edid->extensions; i++) { + edid_ext = (void *)(edid + (i + 1)); + if (edid_ext[0] == DISPLAYID_EXT) + break; + } + + if (edid_ext == NULL) + return; + + while (j < EDID_LENGTH) { + /* Get dynamic video timing range from DisplayID if available */ + if (EDID_LENGTH - j > 13 && edid_ext[j] == 0x25 && + (edid_ext[j+1] & 0xFE) == 0 && (edid_ext[j+2] == 9)) { + min_vfreq = edid_ext[j+9]; + if (edid_ext[j+1] & 7) + max_vfreq = edid_ext[j+10] + ((edid_ext[j+11] & 3) << 8); + else + max_vfreq = edid_ext[j+10]; + + if (max_vfreq && min_vfreq) { + connector->display_info.monitor_range.max_vfreq = max_vfreq; + connector->display_info.monitor_range.min_vfreq = min_vfreq; + + return; + } + } + j++; + } +} + static int parse_amd_vsdb(struct amdgpu_dm_connector *aconnector, struct edid *edid, struct amdgpu_hdmi_vsdb_info *vsdb_info) { @@ -10753,6 +10796,11 @@ void amdgpu_dm_update_freesync_caps(struct drm_connector *connector, if (!adev->dm.freesync_module) goto update;
+ /* Some eDP panels only have the refresh rate range info in DisplayID */ + if ((connector->display_info.monitor_range.min_vfreq == 0 || + connector->display_info.monitor_range.max_vfreq == 0)) + parse_edid_displayid_vrr(connector, edid); + if (edid && (sink->sink_signal == SIGNAL_TYPE_DISPLAY_PORT || sink->sink_signal == SIGNAL_TYPE_EDP)) { bool edid_check_required = false;
From: Pierre-Eric Pelloux-Prayer pierre-eric.pelloux-prayer@amd.com
[ Upstream commit 6fb15dcbcf4f212930350eaee174bb60ed40a536 ]
The call to radeon_vm_clear_freed might clear bo_va->bo, so we have to check it before dereferencing it.
Signed-off-by: Pierre-Eric Pelloux-Prayer pierre-eric.pelloux-prayer@amd.com Acked-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/radeon/radeon_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index 3fec3acdaf284..27225d1fe8d2e 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -641,7 +641,7 @@ static void radeon_gem_va_update_vm(struct radeon_device *rdev, if (r) goto error_unlock;
- if (bo_va->it.start) + if (bo_va->it.start && bo_va->bo) r = radeon_vm_bo_update(rdev, bo_va, bo_va->bo->tbo.resource);
error_unlock:
From: Christian Brauner brauner@kernel.org
[ Upstream commit 391b59b045004d5b985d033263ccba3e941a7740 ]
Jan reported that 'cd ..' may take a long time in deep directory hierarchies under a bind-mount. If concurrent renames happen it is possible to livelock in is_subdir() because it will keep retrying.
Change is_subdir() from simply retrying over and over to retry once and then acquire the rename lock to handle deep ancestor chains better. The list of alternatives to this approach were less then pleasant. Change the scope of rcu lock to cover the whole walk while at it.
A big thanks to Jan and Linus. Both Jan and Linus had proposed effectively the same thing just that one version ended up being slightly more elegant.
Reported-by: Jan Kara jack@suse.cz Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/dcache.c | 31 ++++++++++++++----------------- 1 file changed, 14 insertions(+), 17 deletions(-)
diff --git a/fs/dcache.c b/fs/dcache.c index 9ae808fba517b..99a1b966521a3 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -3202,28 +3202,25 @@ EXPORT_SYMBOL(d_splice_alias);
bool is_subdir(struct dentry *new_dentry, struct dentry *old_dentry) { - bool result; + bool subdir; unsigned seq;
if (new_dentry == old_dentry) return true;
- do { - /* for restarting inner loop in case of seq retry */ - seq = read_seqbegin(&rename_lock); - /* - * Need rcu_readlock to protect against the d_parent trashing - * due to d_move - */ - rcu_read_lock(); - if (d_ancestor(old_dentry, new_dentry)) - result = true; - else - result = false; - rcu_read_unlock(); - } while (read_seqretry(&rename_lock, seq)); - - return result; + /* Access d_parent under rcu as d_move() may change it. */ + rcu_read_lock(); + seq = read_seqbegin(&rename_lock); + subdir = d_ancestor(old_dentry, new_dentry); + /* Try lockless once... */ + if (read_seqretry(&rename_lock, seq)) { + /* ...else acquire lock for progress even on deep chains. */ + read_seqlock_excl(&rename_lock); + subdir = d_ancestor(old_dentry, new_dentry); + read_sequnlock_excl(&rename_lock); + } + rcu_read_unlock(); + return subdir; } EXPORT_SYMBOL(is_subdir);
From: Daniel Gabay daniel.gabay@intel.com
[ Upstream commit 4ec17ce716bdaf680288ce680b4621b52483cc96 ]
The WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK should be set based on the WOWLAN_KEK_KCK_MATERIAL command version. Currently, the command version in the firmware has advanced to 4, which prevents the flag from being set correctly, fix that.
Signed-off-by: Daniel Gabay daniel.gabay@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://patch.msgid.link/20240703064026.a0f162108575.If1a9785727d2a1b0197a39... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 375f401b14535..8a392d6226a29 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -600,7 +600,7 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) hw->wiphy->features |= NL80211_FEATURE_WFA_TPC_IE_IN_PROBES;
if (iwl_fw_lookup_cmd_ver(mvm->fw, WOWLAN_KEK_KCK_MATERIAL, - IWL_FW_CMD_VER_UNKNOWN) == 3) + IWL_FW_CMD_VER_UNKNOWN) >= 3) hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK;
if (fw_has_api(&mvm->fw->ucode_capa,
From: Samuel Holland samuel.holland@sifive.com
[ Upstream commit 7dd646cf745c34d31e7ed2a52265e9ca8308f58f ]
Currently, we stop all the counters while a new cpu is brought online. However, the hpmevent to counter mappings are not reset. The firmware may have some stale encoding in their mapping structure which may lead to undesirable results. We have not encountered such scenario though.
Signed-off-by: Samuel Holland samuel.holland@sifive.com Signed-off-by: Atish Patra atishp@rivosinc.com Link: https://lore.kernel.org/r/20240628-misc_perf_fixes-v4-2-e01cfddcf035@rivosin... Signed-off-by: Palmer Dabbelt palmer@rivosinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/perf/riscv_pmu_sbi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c index d80b4b09152df..ae16ecb15f2d9 100644 --- a/drivers/perf/riscv_pmu_sbi.c +++ b/drivers/perf/riscv_pmu_sbi.c @@ -611,7 +611,7 @@ static inline void pmu_sbi_stop_all(struct riscv_pmu *pmu) * which may include counters that are not enabled yet. */ sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, - 0, pmu->cmask, 0, 0, 0, 0); + 0, pmu->cmask, SBI_PMU_STOP_FLAG_RESET, 0, 0, 0); }
static inline void pmu_sbi_stop_hw_ctrs(struct riscv_pmu *pmu)
From: Puranjay Mohan puranjay@kernel.org
[ Upstream commit 393da6cbb2ff89aadc47683a85269f913aa1c139 ]
ftrace_graph_ret_addr() takes an `idx` integer pointer that is used to optimize the stack unwinding. Pass it a valid pointer to utilize the optimizations that might be available in the future.
The commit is making riscv's usage of ftrace_graph_ret_addr() match x86_64.
Signed-off-by: Puranjay Mohan puranjay@kernel.org Reviewed-by: Steven Rostedt (Google) rostedt@goodmis.org Link: https://lore.kernel.org/r/20240618145820.62112-1-puranjay@kernel.org Signed-off-by: Palmer Dabbelt palmer@rivosinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/kernel/stacktrace.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/kernel/stacktrace.c b/arch/riscv/kernel/stacktrace.c index 0d3f00eb0baee..10e311b2759d3 100644 --- a/arch/riscv/kernel/stacktrace.c +++ b/arch/riscv/kernel/stacktrace.c @@ -32,6 +32,7 @@ void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs, bool (*fn)(void *, unsigned long), void *arg) { unsigned long fp, sp, pc; + int graph_idx = 0; int level = 0;
if (regs) { @@ -68,7 +69,7 @@ void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs, pc = regs->ra; } else { fp = frame->fp; - pc = ftrace_graph_ret_addr(current, NULL, frame->ra, + pc = ftrace_graph_ret_addr(current, &graph_idx, frame->ra, &frame->ra); if (pc == (unsigned long)ret_from_exception) { if (unlikely(!__kernel_text_address(pc) || !fn(arg, pc)))
linux-stable-mirror@lists.linaro.org
-
Sasha Levin