[PATCH v4] drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"
From: Jan-Marek Glogowski glogow@fbihome.de
This re-applies the workaround for "some DP sinks, [which] are a little nuts" from commit 1a36147bb939 ("drm/i915: Perform link quality check unconditionally during long pulse"). It makes the secondary AOC E2460P monitor connected via DP to an acer Veriton N4640G usable again.
This hunk was dropped in commit c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")
Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") [Cleaned up commit message, added stable cc] Signed-off-by: Lyude Paul lyude@redhat.com Signed-off-by: Jan-Marek Glogowski glogow@fbihome.de Cc: stable@vger.kernel.org --- Resending this to update patchwork; will push in a little bit
drivers/gpu/drm/i915/intel_dp.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index b3f6f04c3c7d..db8515171270 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4333,18 +4333,6 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp) return !drm_dp_channel_eq_ok(link_status, intel_dp->lane_count); }
-/* - * If display is now connected check links status, - * there has been known issues of link loss triggering - * long pulse. - * - * Some sinks (eg. ASUS PB287Q) seem to perform some - * weird HPD ping pong during modesets. So we can apparently - * end up with HPD going low during a modeset, and then - * going back up soon after. And once that happens we must - * retrain the link to get a picture. That's in case no - * userspace component reacted to intermittent HPD dip. - */ int intel_dp_retrain_link(struct intel_encoder *encoder, struct drm_modeset_acquire_ctx *ctx) { @@ -5031,7 +5019,8 @@ intel_dp_unset_edid(struct intel_dp *intel_dp) }
static int -intel_dp_long_pulse(struct intel_connector *connector) +intel_dp_long_pulse(struct intel_connector *connector, + struct drm_modeset_acquire_ctx *ctx) { struct drm_i915_private *dev_priv = to_i915(connector->base.dev); struct intel_dp *intel_dp = intel_attached_dp(&connector->base); @@ -5090,6 +5079,22 @@ intel_dp_long_pulse(struct intel_connector *connector) */ status = connector_status_disconnected; goto out; + } else { + /* + * If display is now connected check links status, + * there has been known issues of link loss triggering + * long pulse. + * + * Some sinks (eg. ASUS PB287Q) seem to perform some + * weird HPD ping pong during modesets. So we can apparently + * end up with HPD going low during a modeset, and then + * going back up soon after. And once that happens we must + * retrain the link to get a picture. That's in case no + * userspace component reacted to intermittent HPD dip. + */ + struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; + + intel_dp_retrain_link(encoder, ctx); }
/* @@ -5151,7 +5156,7 @@ intel_dp_detect(struct drm_connector *connector, return ret; }
- status = intel_dp_long_pulse(intel_dp->attached_connector); + status = intel_dp_long_pulse(intel_dp->attached_connector, ctx); }
intel_dp->detect_done = false;
On Sat, 25 Aug 2018, Lyude Paul lyude@redhat.com wrote:
From: Jan-Marek Glogowski glogow@fbihome.de
This re-applies the workaround for "some DP sinks, [which] are a little nuts" from commit 1a36147bb939 ("drm/i915: Perform link quality check unconditionally during long pulse"). It makes the secondary AOC E2460P monitor connected via DP to an acer Veriton N4640G usable again.
This hunk was dropped in commit c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")
Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") [Cleaned up commit message, added stable cc] Signed-off-by: Lyude Paul lyude@redhat.com Signed-off-by: Jan-Marek Glogowski glogow@fbihome.de Cc: stable@vger.kernel.org
Resending this to update patchwork; will push in a little bit
Is there a bugzilla? Reference to a list discussion? Something with a dmesg where someone can actually verify this is the right fix?
IMO needs an ack from Ville too. He should be in Cc: in the first place as the author of the regressing commit.
'dim fixes c85d200e8321' gives you the output:
Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") Cc: Manasi Navare manasi.d.navare@intel.com Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Cc: Ville Syrjälä ville.syrjala@linux.intel.com Cc: Lyude Paul lyude@redhat.com Cc: Jani Nikula jani.nikula@linux.intel.com Cc: Joonas Lahtinen joonas.lahtinen@linux.intel.com Cc: Rodrigo Vivi rodrigo.vivi@intel.com Cc: intel-gfx@lists.freedesktop.org Cc: stable@vger.kernel.org # v4.17+
BR, Jani.
drivers/gpu/drm/i915/intel_dp.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index b3f6f04c3c7d..db8515171270 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4333,18 +4333,6 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp) return !drm_dp_channel_eq_ok(link_status, intel_dp->lane_count); } -/*
- If display is now connected check links status,
- there has been known issues of link loss triggering
- long pulse.
- Some sinks (eg. ASUS PB287Q) seem to perform some
- weird HPD ping pong during modesets. So we can apparently
- end up with HPD going low during a modeset, and then
- going back up soon after. And once that happens we must
- retrain the link to get a picture. That's in case no
- userspace component reacted to intermittent HPD dip.
- */
int intel_dp_retrain_link(struct intel_encoder *encoder, struct drm_modeset_acquire_ctx *ctx) { @@ -5031,7 +5019,8 @@ intel_dp_unset_edid(struct intel_dp *intel_dp) } static int -intel_dp_long_pulse(struct intel_connector *connector) +intel_dp_long_pulse(struct intel_connector *connector,
struct drm_modeset_acquire_ctx *ctx){ struct drm_i915_private *dev_priv = to_i915(connector->base.dev); struct intel_dp *intel_dp = intel_attached_dp(&connector->base); @@ -5090,6 +5079,22 @@ intel_dp_long_pulse(struct intel_connector *connector) */ status = connector_status_disconnected; goto out;
- } else {
/** If display is now connected check links status,* there has been known issues of link loss triggering* long pulse.** Some sinks (eg. ASUS PB287Q) seem to perform some* weird HPD ping pong during modesets. So we can apparently* end up with HPD going low during a modeset, and then* going back up soon after. And once that happens we must* retrain the link to get a picture. That's in case no* userspace component reacted to intermittent HPD dip.*/struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;intel_dp_retrain_link(encoder, ctx);/* @@ -5151,7 +5156,7 @@ intel_dp_detect(struct drm_connector *connector, return ret; }
status = intel_dp_long_pulse(intel_dp->attached_connector);
status = intel_dp_long_pulse(intel_dp->attached_connector, ctx);intel_dp->detect_done = false;
Am 27.08.2018 um 10:43 schrieb Jani Nikula:
On Sat, 25 Aug 2018, Lyude Paul lyude@redhat.com wrote:
From: Jan-Marek Glogowski glogow@fbihome.de
This re-applies the workaround for "some DP sinks, [which] are a little nuts" from commit 1a36147bb939 ("drm/i915: Perform link quality check unconditionally during long pulse"). It makes the secondary AOC E2460P monitor connected via DP to an acer Veriton N4640G usable again.
This hunk was dropped in commit c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")
Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") [Cleaned up commit message, added stable cc] Signed-off-by: Lyude Paul lyude@redhat.com Signed-off-by: Jan-Marek Glogowski glogow@fbihome.de Cc: stable@vger.kernel.org
Resending this to update patchwork; will push in a little bit
Is there a bugzilla? Reference to a list discussion? Something with a dmesg where someone can actually verify this is the right fix?
The bug is at https://bugs.freedesktop.org/show_bug.cgi?id=107446 The original thread starts here: https://lists.freedesktop.org/archives/intel-gfx/2018-August/172940.html
Jan-Marek
On Mon, 2018-08-27 at 11:43 +0300, Jani Nikula wrote:
On Sat, 25 Aug 2018, Lyude Paul lyude@redhat.com wrote:
From: Jan-Marek Glogowski glogow@fbihome.de
This re-applies the workaround for "some DP sinks, [which] are a little nuts" from commit 1a36147bb939 ("drm/i915: Perform link quality check unconditionally during long pulse"). It makes the secondary AOC E2460P monitor connected via DP to an acer Veriton N4640G usable again.
This hunk was dropped in commit c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")
Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") [Cleaned up commit message, added stable cc] Signed-off-by: Lyude Paul lyude@redhat.com Signed-off-by: Jan-Marek Glogowski glogow@fbihome.de Cc: stable@vger.kernel.org
Resending this to update patchwork; will push in a little bit
Is there a bugzilla? Reference to a list discussion? Something with a dmesg where someone can actually verify this is the right fix?
This patch has actually been on the list for a while now-I have had mdnavare take a look at it as well (they said it looked fine with the only change being in regards to the comment), and it'd been on the list for a while already.
IMO needs an ack from Ville too. He should be in Cc: in the first place as the author of the regressing commit.
'dim fixes c85d200e8321' gives you the output:
aaah-I had thought it was just for generating the Fixes line, I will be more careful about that in the future
Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") Cc: Manasi Navare manasi.d.navare@intel.com Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Cc: Ville Syrjälä ville.syrjala@linux.intel.com Cc: Lyude Paul lyude@redhat.com Cc: Jani Nikula jani.nikula@linux.intel.com Cc: Joonas Lahtinen joonas.lahtinen@linux.intel.com Cc: Rodrigo Vivi rodrigo.vivi@intel.com Cc: intel-gfx@lists.freedesktop.org Cc: stable@vger.kernel.org # v4.17+
BR, Jani.
drivers/gpu/drm/i915/intel_dp.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index b3f6f04c3c7d..db8515171270 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4333,18 +4333,6 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp) return !drm_dp_channel_eq_ok(link_status, intel_dp->lane_count); } -/*
- If display is now connected check links status,
- there has been known issues of link loss triggering
- long pulse.
- Some sinks (eg. ASUS PB287Q) seem to perform some
- weird HPD ping pong during modesets. So we can apparently
- end up with HPD going low during a modeset, and then
- going back up soon after. And once that happens we must
- retrain the link to get a picture. That's in case no
- userspace component reacted to intermittent HPD dip.
- */
int intel_dp_retrain_link(struct intel_encoder *encoder, struct drm_modeset_acquire_ctx *ctx) { @@ -5031,7 +5019,8 @@ intel_dp_unset_edid(struct intel_dp *intel_dp) } static int -intel_dp_long_pulse(struct intel_connector *connector) +intel_dp_long_pulse(struct intel_connector *connector,
struct drm_modeset_acquire_ctx *ctx){ struct drm_i915_private *dev_priv = to_i915(connector->base.dev); struct intel_dp *intel_dp = intel_attached_dp(&connector->base); @@ -5090,6 +5079,22 @@ intel_dp_long_pulse(struct intel_connector *connector) */ status = connector_status_disconnected; goto out;
- } else {
/** If display is now connected check links status,* there has been known issues of link loss triggering* long pulse.** Some sinks (eg. ASUS PB287Q) seem to perform some* weird HPD ping pong during modesets. So we can apparently* end up with HPD going low during a modeset, and then* going back up soon after. And once that happens we must* retrain the link to get a picture. That's in case no* userspace component reacted to intermittent HPD dip.*/struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)-base;
intel_dp_retrain_link(encoder, ctx);/* @@ -5151,7 +5156,7 @@ intel_dp_detect(struct drm_connector *connector, return ret; }
status = intel_dp_long_pulse(intel_dp->attached_connector);
status = intel_dp_long_pulse(intel_dp->attached_connector,ctx); } intel_dp->detect_done = false;
On Mon, Aug 27, 2018 at 01:39:02PM -0400, Lyude Paul wrote:
On Mon, 2018-08-27 at 11:43 +0300, Jani Nikula wrote:
On Sat, 25 Aug 2018, Lyude Paul lyude@redhat.com wrote:
From: Jan-Marek Glogowski glogow@fbihome.de
This re-applies the workaround for "some DP sinks, [which] are a little nuts" from commit 1a36147bb939 ("drm/i915: Perform link quality check unconditionally during long pulse"). It makes the secondary AOC E2460P monitor connected via DP to an acer Veriton N4640G usable again.
This hunk was dropped in commit c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")
Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") [Cleaned up commit message, added stable cc] Signed-off-by: Lyude Paul lyude@redhat.com Signed-off-by: Jan-Marek Glogowski glogow@fbihome.de Cc: stable@vger.kernel.org
Resending this to update patchwork; will push in a little bit
Is there a bugzilla? Reference to a list discussion? Something with a dmesg where someone can actually verify this is the right fix?
This patch has actually been on the list for a while now-I have had mdnavare take a look at it as well (they said it looked fine with the only change being in regards to the comment), and it'd been on the list for a while already.
IMO needs an ack from Ville too. He should be in Cc: in the first place as the author of the regressing commit.
'dim fixes c85d200e8321' gives you the output:
aaah-I had thought it was just for generating the Fixes line, I will be more careful about that in the future
Hi Lyude,
I understand that this patch was a while on the mailing list and no proper attention, but besides the commit message information that dim is generating I have a feeling now that this patch wasn't quite ready yet and shouldn't be rushed in like it was.
Since you modified few versions ideally it would be good to have extra eyes and the mandatory "Reviewed-by" there.
Also it is a good idea to give few days for different timezones to comment out (after the re-sping I mean)
And finally based on the discussions it seems that there is still some work to get done or a different way to handle this other this back and forth of reapply-revert-reapply...
I just noticed it when preparing drm-intel-fixes pull request.
Since I'm not 100% confident this patch should be here I'm removing it from this week's pull request.
But probably adding it next week if Jani and Ville give and ack or indication that it is right or at least he best we could do now.
thanks, Rodrigo.
Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") Cc: Manasi Navare manasi.d.navare@intel.com Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Cc: Ville Syrjälä ville.syrjala@linux.intel.com Cc: Lyude Paul lyude@redhat.com Cc: Jani Nikula jani.nikula@linux.intel.com Cc: Joonas Lahtinen joonas.lahtinen@linux.intel.com Cc: Rodrigo Vivi rodrigo.vivi@intel.com Cc: intel-gfx@lists.freedesktop.org Cc: stable@vger.kernel.org # v4.17+
BR, Jani.
drivers/gpu/drm/i915/intel_dp.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index b3f6f04c3c7d..db8515171270 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4333,18 +4333,6 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp) return !drm_dp_channel_eq_ok(link_status, intel_dp->lane_count); } -/*
- If display is now connected check links status,
- there has been known issues of link loss triggering
- long pulse.
- Some sinks (eg. ASUS PB287Q) seem to perform some
- weird HPD ping pong during modesets. So we can apparently
- end up with HPD going low during a modeset, and then
- going back up soon after. And once that happens we must
- retrain the link to get a picture. That's in case no
- userspace component reacted to intermittent HPD dip.
- */
int intel_dp_retrain_link(struct intel_encoder *encoder, struct drm_modeset_acquire_ctx *ctx) { @@ -5031,7 +5019,8 @@ intel_dp_unset_edid(struct intel_dp *intel_dp) } static int -intel_dp_long_pulse(struct intel_connector *connector) +intel_dp_long_pulse(struct intel_connector *connector,
struct drm_modeset_acquire_ctx *ctx){ struct drm_i915_private *dev_priv = to_i915(connector->base.dev); struct intel_dp *intel_dp = intel_attached_dp(&connector->base); @@ -5090,6 +5079,22 @@ intel_dp_long_pulse(struct intel_connector *connector) */ status = connector_status_disconnected; goto out;
- } else {
/** If display is now connected check links status,* there has been known issues of link loss triggering* long pulse.** Some sinks (eg. ASUS PB287Q) seem to perform some* weird HPD ping pong during modesets. So we can apparently* end up with HPD going low during a modeset, and then* going back up soon after. And once that happens we must* retrain the link to get a picture. That's in case no* userspace component reacted to intermittent HPD dip.*/struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)-base;
intel_dp_retrain_link(encoder, ctx);/* @@ -5151,7 +5156,7 @@ intel_dp_detect(struct drm_connector *connector, return ret; }
status = intel_dp_long_pulse(intel_dp->attached_connector);
status = intel_dp_long_pulse(intel_dp->attached_connector,ctx); } intel_dp->detect_done = false;
-- Cheers, Lyude Paul
Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
On Wed, 2018-08-29 at 14:22 -0700, Rodrigo Vivi wrote:
On Mon, Aug 27, 2018 at 01:39:02PM -0400, Lyude Paul wrote:
On Mon, 2018-08-27 at 11:43 +0300, Jani Nikula wrote:
On Sat, 25 Aug 2018, Lyude Paul lyude@redhat.com wrote:
From: Jan-Marek Glogowski glogow@fbihome.de
This re-applies the workaround for "some DP sinks, [which] are a little nuts" from commit 1a36147bb939 ("drm/i915: Perform link quality check unconditionally during long pulse"). It makes the secondary AOC E2460P monitor connected via DP to an acer Veriton N4640G usable again.
This hunk was dropped in commit c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")
Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") [Cleaned up commit message, added stable cc] Signed-off-by: Lyude Paul lyude@redhat.com Signed-off-by: Jan-Marek Glogowski glogow@fbihome.de Cc: stable@vger.kernel.org
Resending this to update patchwork; will push in a little bit
Is there a bugzilla? Reference to a list discussion? Something with a dmesg where someone can actually verify this is the right fix?
This patch has actually been on the list for a while now-I have had mdnavare take a look at it as well (they said it looked fine with the only change being in regards to the comment), and it'd been on the list for a while already.
IMO needs an ack from Ville too. He should be in Cc: in the first place as the author of the regressing commit.
'dim fixes c85d200e8321' gives you the output:
aaah-I had thought it was just for generating the Fixes line, I will be more careful about that in the future
Hi Lyude,
I understand that this patch was a while on the mailing list and no proper attention, but besides the commit message information that dim is generating I have a feeling now that this patch wasn't quite ready yet and shouldn't be rushed in like it was.
Since you modified few versions ideally it would be good to have extra eyes and the mandatory "Reviewed-by" there.
Also it is a good idea to give few days for different timezones to comment out (after the re-sping I mean)
And finally based on the discussions it seems that there is still some work to get done or a different way to handle this other this back and forth of reapply-revert-reapply...
I just noticed it when preparing drm-intel-fixes pull request.
Since I'm not 100% confident this patch should be here I'm removing it from this week's pull request.
But probably adding it next week if Jani and Ville give and ack or indication that it is right or at least he best we could do now.
I understand! Sorry about all of the trouble, I will be much more careful in the future
thanks, Rodrigo.
Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") Cc: Manasi Navare manasi.d.navare@intel.com Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Cc: Ville Syrjälä ville.syrjala@linux.intel.com Cc: Lyude Paul lyude@redhat.com Cc: Jani Nikula jani.nikula@linux.intel.com Cc: Joonas Lahtinen joonas.lahtinen@linux.intel.com Cc: Rodrigo Vivi rodrigo.vivi@intel.com Cc: intel-gfx@lists.freedesktop.org Cc: stable@vger.kernel.org # v4.17+
BR, Jani.
drivers/gpu/drm/i915/intel_dp.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index b3f6f04c3c7d..db8515171270 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4333,18 +4333,6 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp) return !drm_dp_channel_eq_ok(link_status, intel_dp->lane_count); } -/*
- If display is now connected check links status,
- there has been known issues of link loss triggering
- long pulse.
- Some sinks (eg. ASUS PB287Q) seem to perform some
- weird HPD ping pong during modesets. So we can apparently
- end up with HPD going low during a modeset, and then
- going back up soon after. And once that happens we must
- retrain the link to get a picture. That's in case no
- userspace component reacted to intermittent HPD dip.
- */
int intel_dp_retrain_link(struct intel_encoder *encoder, struct drm_modeset_acquire_ctx *ctx) { @@ -5031,7 +5019,8 @@ intel_dp_unset_edid(struct intel_dp *intel_dp) } static int -intel_dp_long_pulse(struct intel_connector *connector) +intel_dp_long_pulse(struct intel_connector *connector,
struct drm_modeset_acquire_ctx *ctx){ struct drm_i915_private *dev_priv = to_i915(connector-
base.dev);
struct intel_dp *intel_dp = intel_attached_dp(&connector->base); @@ -5090,6 +5079,22 @@ intel_dp_long_pulse(struct intel_connector *connector) */ status = connector_status_disconnected; goto out;
- } else {
/** If display is now connected check links status,* there has been known issues of link loss triggering* long pulse.** Some sinks (eg. ASUS PB287Q) seem to perform some* weird HPD ping pong during modesets. So we canapparently
* end up with HPD going low during a modeset, and then* going back up soon after. And once that happens wemust
* retrain the link to get a picture. That's in case no* userspace component reacted to intermittent HPD dip.*/struct intel_encoder *encoder =&dp_to_dig_port(intel_dp)-
base;
intel_dp_retrain_link(encoder, ctx);/* @@ -5151,7 +5156,7 @@ intel_dp_detect(struct drm_connector *connector, return ret; }
status = intel_dp_long_pulse(intel_dp-attached_connector);
status = intel_dp_long_pulse(intel_dp-attached_connector,
ctx); } intel_dp->detect_done = false;
-- Cheers, Lyude Paul
Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
On Wed, Aug 29, 2018 at 05:28:23PM -0400, Lyude Paul wrote:
On Wed, 2018-08-29 at 14:22 -0700, Rodrigo Vivi wrote:
On Mon, Aug 27, 2018 at 01:39:02PM -0400, Lyude Paul wrote:
On Mon, 2018-08-27 at 11:43 +0300, Jani Nikula wrote:
On Sat, 25 Aug 2018, Lyude Paul lyude@redhat.com wrote:
From: Jan-Marek Glogowski glogow@fbihome.de
This re-applies the workaround for "some DP sinks, [which] are a little nuts" from commit 1a36147bb939 ("drm/i915: Perform link quality check unconditionally during long pulse"). It makes the secondary AOC E2460P monitor connected via DP to an acer Veriton N4640G usable again.
This hunk was dropped in commit c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")
Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") [Cleaned up commit message, added stable cc] Signed-off-by: Lyude Paul lyude@redhat.com Signed-off-by: Jan-Marek Glogowski glogow@fbihome.de Cc: stable@vger.kernel.org
Resending this to update patchwork; will push in a little bit
Is there a bugzilla? Reference to a list discussion? Something with a dmesg where someone can actually verify this is the right fix?
This patch has actually been on the list for a while now-I have had mdnavare take a look at it as well (they said it looked fine with the only change being in regards to the comment), and it'd been on the list for a while already.
IMO needs an ack from Ville too. He should be in Cc: in the first place as the author of the regressing commit.
'dim fixes c85d200e8321' gives you the output:
aaah-I had thought it was just for generating the Fixes line, I will be more careful about that in the future
no worries and definitely no trouble at all! :)
Hi Lyude,
I understand that this patch was a while on the mailing list and no proper attention, but besides the commit message information that dim is generating I have a feeling now that this patch wasn't quite ready yet and shouldn't be rushed in like it was.
Since you modified few versions ideally it would be good to have extra eyes and the mandatory "Reviewed-by" there.
Also it is a good idea to give few days for different timezones to comment out (after the re-sping I mean)
And finally based on the discussions it seems that there is still some work to get done or a different way to handle this other this back and forth of reapply-revert-reapply...
I just noticed it when preparing drm-intel-fixes pull request.
Since I'm not 100% confident this patch should be here I'm removing it from this week's pull request.
But probably adding it next week if Jani and Ville give and ack or indication that it is right or at least he best we could do now.
I understand! Sorry about all of the trouble, I will be much more careful in the future
thanks, Rodrigo.
Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") Cc: Manasi Navare manasi.d.navare@intel.com Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Cc: Ville Syrjälä ville.syrjala@linux.intel.com Cc: Lyude Paul lyude@redhat.com Cc: Jani Nikula jani.nikula@linux.intel.com Cc: Joonas Lahtinen joonas.lahtinen@linux.intel.com Cc: Rodrigo Vivi rodrigo.vivi@intel.com Cc: intel-gfx@lists.freedesktop.org Cc: stable@vger.kernel.org # v4.17+
BR, Jani.
drivers/gpu/drm/i915/intel_dp.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index b3f6f04c3c7d..db8515171270 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4333,18 +4333,6 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp) return !drm_dp_channel_eq_ok(link_status, intel_dp->lane_count); } -/*
- If display is now connected check links status,
- there has been known issues of link loss triggering
- long pulse.
- Some sinks (eg. ASUS PB287Q) seem to perform some
- weird HPD ping pong during modesets. So we can apparently
- end up with HPD going low during a modeset, and then
- going back up soon after. And once that happens we must
- retrain the link to get a picture. That's in case no
- userspace component reacted to intermittent HPD dip.
- */
int intel_dp_retrain_link(struct intel_encoder *encoder, struct drm_modeset_acquire_ctx *ctx) { @@ -5031,7 +5019,8 @@ intel_dp_unset_edid(struct intel_dp *intel_dp) } static int -intel_dp_long_pulse(struct intel_connector *connector) +intel_dp_long_pulse(struct intel_connector *connector,
struct drm_modeset_acquire_ctx *ctx){ struct drm_i915_private *dev_priv = to_i915(connector-
base.dev);
struct intel_dp *intel_dp = intel_attached_dp(&connector->base); @@ -5090,6 +5079,22 @@ intel_dp_long_pulse(struct intel_connector *connector) */ status = connector_status_disconnected; goto out;
- } else {
/** If display is now connected check links status,* there has been known issues of link loss triggering* long pulse.** Some sinks (eg. ASUS PB287Q) seem to perform some* weird HPD ping pong during modesets. So we canapparently
* end up with HPD going low during a modeset, and then* going back up soon after. And once that happens wemust
* retrain the link to get a picture. That's in case no* userspace component reacted to intermittent HPD dip.*/struct intel_encoder *encoder =&dp_to_dig_port(intel_dp)-
base;
intel_dp_retrain_link(encoder, ctx);/* @@ -5151,7 +5156,7 @@ intel_dp_detect(struct drm_connector *connector, return ret; }
status = intel_dp_long_pulse(intel_dp-attached_connector);
status = intel_dp_long_pulse(intel_dp-attached_connector,
ctx); } intel_dp->detect_done = false;
-- Cheers, Lyude Paul
Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
On Sat, Aug 25, 2018 at 03:10:35PM -0400, Lyude Paul wrote:
From: Jan-Marek Glogowski glogow@fbihome.de
This re-applies the workaround for "some DP sinks, [which] are a little nuts" from commit 1a36147bb939 ("drm/i915: Perform link quality check unconditionally during long pulse"). It makes the secondary AOC E2460P monitor connected via DP to an acer Veriton N4640G usable again.
This hunk was dropped in commit c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")
Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") [Cleaned up commit message, added stable cc] Signed-off-by: Lyude Paul lyude@redhat.com Signed-off-by: Jan-Marek Glogowski glogow@fbihome.de Cc: stable@vger.kernel.org
Resending this to update patchwork; will push in a little bit
drivers/gpu/drm/i915/intel_dp.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index b3f6f04c3c7d..db8515171270 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4333,18 +4333,6 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp) return !drm_dp_channel_eq_ok(link_status, intel_dp->lane_count); } -/*
- If display is now connected check links status,
- there has been known issues of link loss triggering
- long pulse.
- Some sinks (eg. ASUS PB287Q) seem to perform some
- weird HPD ping pong during modesets. So we can apparently
- end up with HPD going low during a modeset, and then
- going back up soon after. And once that happens we must
- retrain the link to get a picture. That's in case no
- userspace component reacted to intermittent HPD dip.
- */
int intel_dp_retrain_link(struct intel_encoder *encoder, struct drm_modeset_acquire_ctx *ctx) { @@ -5031,7 +5019,8 @@ intel_dp_unset_edid(struct intel_dp *intel_dp) } static int -intel_dp_long_pulse(struct intel_connector *connector) +intel_dp_long_pulse(struct intel_connector *connector,
struct drm_modeset_acquire_ctx *ctx){ struct drm_i915_private *dev_priv = to_i915(connector->base.dev); struct intel_dp *intel_dp = intel_attached_dp(&connector->base); @@ -5090,6 +5079,22 @@ intel_dp_long_pulse(struct intel_connector *connector) */ status = connector_status_disconnected; goto out;
- } else {
/** If display is now connected check links status,* there has been known issues of link loss triggering* long pulse.** Some sinks (eg. ASUS PB287Q) seem to perform some* weird HPD ping pong during modesets. So we can apparently* end up with HPD going low during a modeset, and then* going back up soon after. And once that happens we must* retrain the link to get a picture. That's in case no* userspace component reacted to intermittent HPD dip.*/struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;intel_dp_retrain_link(encoder, ctx);
We should really have a comment here that this is purely duct tape for sinks that fail to signal a hpd when the link goes bad (either that or we fail to process the hpd correctly).
I suppose a better way to do this hack would be to do the link quality check at the end of modeset, or from a delayed work. As is this depends on userspace/fbdev doing an explicit probe after the modeset which seems pretty fragile.
} /* @@ -5151,7 +5156,7 @@ intel_dp_detect(struct drm_connector *connector, return ret; }
status = intel_dp_long_pulse(intel_dp->attached_connector);
status = intel_dp_long_pulse(intel_dp->attached_connector, ctx);intel_dp->detect_done = false; -- 2.17.1
Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
On Mon, 2018-08-27 at 15:08 +0300, Ville Syrjälä wrote:
On Sat, Aug 25, 2018 at 03:10:35PM -0400, Lyude Paul wrote:
From: Jan-Marek Glogowski glogow@fbihome.de
This re-applies the workaround for "some DP sinks, [which] are a little nuts" from commit 1a36147bb939 ("drm/i915: Perform link quality check unconditionally during long pulse"). It makes the secondary AOC E2460P monitor connected via DP to an acer Veriton N4640G usable again.
This hunk was dropped in commit c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")
Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") [Cleaned up commit message, added stable cc] Signed-off-by: Lyude Paul lyude@redhat.com Signed-off-by: Jan-Marek Glogowski glogow@fbihome.de Cc: stable@vger.kernel.org
Resending this to update patchwork; will push in a little bit
drivers/gpu/drm/i915/intel_dp.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index b3f6f04c3c7d..db8515171270 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4333,18 +4333,6 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp) return !drm_dp_channel_eq_ok(link_status, intel_dp->lane_count); } -/*
- If display is now connected check links status,
- there has been known issues of link loss triggering
- long pulse.
- Some sinks (eg. ASUS PB287Q) seem to perform some
- weird HPD ping pong during modesets. So we can apparently
- end up with HPD going low during a modeset, and then
- going back up soon after. And once that happens we must
- retrain the link to get a picture. That's in case no
- userspace component reacted to intermittent HPD dip.
- */
int intel_dp_retrain_link(struct intel_encoder *encoder, struct drm_modeset_acquire_ctx *ctx) { @@ -5031,7 +5019,8 @@ intel_dp_unset_edid(struct intel_dp *intel_dp) } static int -intel_dp_long_pulse(struct intel_connector *connector) +intel_dp_long_pulse(struct intel_connector *connector,
struct drm_modeset_acquire_ctx *ctx){ struct drm_i915_private *dev_priv = to_i915(connector->base.dev); struct intel_dp *intel_dp = intel_attached_dp(&connector->base); @@ -5090,6 +5079,22 @@ intel_dp_long_pulse(struct intel_connector *connector) */ status = connector_status_disconnected; goto out;
- } else {
/** If display is now connected check links status,* there has been known issues of link loss triggering* long pulse.** Some sinks (eg. ASUS PB287Q) seem to perform some* weird HPD ping pong during modesets. So we can apparently* end up with HPD going low during a modeset, and then* going back up soon after. And once that happens we must* retrain the link to get a picture. That's in case no* userspace component reacted to intermittent HPD dip.*/struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)-base;
intel_dp_retrain_link(encoder, ctx);We should really have a comment here that this is purely duct tape for sinks that fail to signal a hpd when the link goes bad (either that or we fail to process the hpd correctly).
I'm fine with adding another patch to clarify that comment as well
I suppose a better way to do this hack would be to do the link quality check at the end of modeset, or from a delayed work. As is this depends on userspace/fbdev doing an explicit probe after the modeset which seems pretty fragile.
I think having that at the end of a modeset in addition to this would be a good idea as well, I don't see any harm in having an additional check in the long pulse handler in case something causes the link to become unstable at some point in the future after the initial modeset
Jan, do you think you could provide some dmesg logs for this issue?
} /* @@ -5151,7 +5156,7 @@ intel_dp_detect(struct drm_connector *connector, return ret; }
status = intel_dp_long_pulse(intel_dp->attached_connector);
status = intel_dp_long_pulse(intel_dp->attached_connector,ctx); } intel_dp->detect_done = false; -- 2.17.1
Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
On Mon, Aug 27, 2018 at 01:45:48PM -0400, Lyude Paul wrote:
On Mon, 2018-08-27 at 15:08 +0300, Ville Syrjälä wrote:
On Sat, Aug 25, 2018 at 03:10:35PM -0400, Lyude Paul wrote:
From: Jan-Marek Glogowski glogow@fbihome.de
This re-applies the workaround for "some DP sinks, [which] are a little nuts" from commit 1a36147bb939 ("drm/i915: Perform link quality check unconditionally during long pulse"). It makes the secondary AOC E2460P monitor connected via DP to an acer Veriton N4640G usable again.
This hunk was dropped in commit c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")
Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") [Cleaned up commit message, added stable cc] Signed-off-by: Lyude Paul lyude@redhat.com Signed-off-by: Jan-Marek Glogowski glogow@fbihome.de Cc: stable@vger.kernel.org
Resending this to update patchwork; will push in a little bit
drivers/gpu/drm/i915/intel_dp.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index b3f6f04c3c7d..db8515171270 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4333,18 +4333,6 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp) return !drm_dp_channel_eq_ok(link_status, intel_dp->lane_count); } -/*
- If display is now connected check links status,
- there has been known issues of link loss triggering
- long pulse.
- Some sinks (eg. ASUS PB287Q) seem to perform some
- weird HPD ping pong during modesets. So we can apparently
- end up with HPD going low during a modeset, and then
- going back up soon after. And once that happens we must
- retrain the link to get a picture. That's in case no
- userspace component reacted to intermittent HPD dip.
- */
int intel_dp_retrain_link(struct intel_encoder *encoder, struct drm_modeset_acquire_ctx *ctx) { @@ -5031,7 +5019,8 @@ intel_dp_unset_edid(struct intel_dp *intel_dp) } static int -intel_dp_long_pulse(struct intel_connector *connector) +intel_dp_long_pulse(struct intel_connector *connector,
struct drm_modeset_acquire_ctx *ctx){ struct drm_i915_private *dev_priv = to_i915(connector->base.dev); struct intel_dp *intel_dp = intel_attached_dp(&connector->base); @@ -5090,6 +5079,22 @@ intel_dp_long_pulse(struct intel_connector *connector) */ status = connector_status_disconnected; goto out;
- } else {
/** If display is now connected check links status,* there has been known issues of link loss triggering* long pulse.** Some sinks (eg. ASUS PB287Q) seem to perform some* weird HPD ping pong during modesets. So we can apparently* end up with HPD going low during a modeset, and then* going back up soon after. And once that happens we must* retrain the link to get a picture. That's in case no* userspace component reacted to intermittent HPD dip.*/struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)-base;
intel_dp_retrain_link(encoder, ctx);We should really have a comment here that this is purely duct tape for sinks that fail to signal a hpd when the link goes bad (either that or we fail to process the hpd correctly).
I'm fine with adding another patch to clarify that comment as well
I suppose a better way to do this hack would be to do the link quality check at the end of modeset, or from a delayed work. As is this depends on userspace/fbdev doing an explicit probe after the modeset which seems pretty fragile.
I think having that at the end of a modeset in addition to this would be a good idea as well, I don't see any harm in having an additional check in the long pulse handler in case something causes the link to become unstable at some point in the future after the initial modeset
We already have that via the hotplug hook. The problem here is that there is apparently no hpd signalled by the sink.
Someone should probably rename intel_dp_long_pulse() to something else so that people don't get the wrong impression that it's somehow dedicated to handling long hpds. In fact just s/intel_dp_long_pulse()/intel_dp_detect()/ and sucking the few lines of extra code into the function might be the right way to go.
Jan, do you think you could provide some dmesg logs for this issue?
} /* @@ -5151,7 +5156,7 @@ intel_dp_detect(struct drm_connector *connector, return ret; }
status = intel_dp_long_pulse(intel_dp->attached_connector);
status = intel_dp_long_pulse(intel_dp->attached_connector,ctx); } intel_dp->detect_done = false; -- 2.17.1
Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
-- Cheers, Lyude Paul
linux-stable-mirror@lists.linaro.org
-
Jan-Marek Glogowski -
Jani Nikula -
Lyude Paul -
Rodrigo Vivi -
Ville Syrjälä