The use of PHY_REFCLK_USE_PAD introduced a regression for apq8064 devices. It was tested that while apq doesn't require the padding, ipq SoC must use it or the kernel hangs on boot.

Fixes: de3c4bf6489 ("PCI: qcom: Add support for tx term offset for rev 2.1.0") Reported-by: Ilia Mirkin imirkin@alum.mit.edu Signed-off-by: Ilia Mirkin imirkin@alum.mit.edu Signed-off-by: Ansuel Smith ansuelsmth@gmail.com Cc: stable@vger.kernel.org # v4.19+ --- drivers/pci/controller/dwc/pcie-qcom.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 3aac77a295ba..dad6e9ce66ba 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -387,7 +387,9 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)

/* enable external reference clock */ val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK); - val &= ~PHY_REFCLK_USE_PAD; + /* USE_PAD is required only for ipq806x */ + if (!of_device_is_compatible(node, "qcom,pcie-apq8064")) + val &= ~PHY_REFCLK_USE_PAD; val |= PHY_REFCLK_SSP_EN; writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);