For Gen-1 targets like SDM630, it is seen that stressing out the controller in host mode results in HC died error:

xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for SDM630 to mitigate this issue.

Cc: stable@vger.kernel.org Fixes: c65a4ed2ea8b ("arm64: dts: qcom: sdm630: Add USB configuration") Signed-off-by: Krishna Kurapati quic_kriskura@quicinc.com --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 1 + 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 94057ebf767f..c7e3764a8cf3 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1302,6 +1302,7 @@ usb3_dwc3: usb@a800000 { interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk;

phys = <&qusb2phy0>, <&usb3_qmpphy>; phy-names = "usb2-phy", "usb3-phy";