From: Jann Horn jannh@google.com

commit 57bc3d3ae8c14df3ceb4e17d26ddf9eeab304581 upstream.

ax88179_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular:

- The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data.

I have tested that this can be used by a malicious USB device to send a bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response that contains random kernel heap data. It's probably also possible to get OOB writes from this on a little-endian system somehow - maybe by triggering skb_cow() via IP options processing -, but I haven't tested that.

Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Cc: stable@kernel.org Signed-off-by: Jann Horn jannh@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/usb/ax88179_178a.c | 68 +++++++++++++++++++++++------------------ 1 file changed, 39 insertions(+), 29 deletions(-)

--- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1373,59 +1373,69 @@ static int ax88179_rx_fixup(struct usbne u16 hdr_off; u32 *pkt_hdr;

- /* This check is no longer done by usbnet */ - if (skb->len < dev->net->hard_header_len) + /* At the end of the SKB, there's a header telling us how many packets + * are bundled into this buffer and where we can find an array of + * per-packet metadata (which contains elements encoded into u16). + */ + if (skb->len < 4) return 0; - skb_trim(skb, skb->len - 4); memcpy(&rx_hdr, skb_tail_pointer(skb), 4); le32_to_cpus(&rx_hdr); - pkt_cnt = (u16)rx_hdr; hdr_off = (u16)(rx_hdr >> 16); + + if (pkt_cnt == 0) + return 0; + + /* Make sure that the bounds of the metadata array are inside the SKB + * (and in front of the counter at the end). + */ + if (pkt_cnt * 2 + hdr_off > skb->len) + return 0; pkt_hdr = (u32 *)(skb->data + hdr_off);

- while (pkt_cnt--) { + /* Packets must not overlap the metadata array */ + skb_trim(skb, hdr_off); + + for (; ; pkt_cnt--, pkt_hdr++) { u16 pkt_len;

le32_to_cpus(pkt_hdr); pkt_len = (*pkt_hdr >> 16) & 0x1fff;

- /* Check CRC or runt packet */ - if ((*pkt_hdr & AX_RXHDR_CRC_ERR) || - (*pkt_hdr & AX_RXHDR_DROP_ERR)) { - skb_pull(skb, (pkt_len + 7) & 0xFFF8); - pkt_hdr++; - continue; - } - - if (pkt_cnt == 0) { - skb->len = pkt_len; - /* Skip IP alignment pseudo header */ - skb_pull(skb, 2); - skb_set_tail_pointer(skb, skb->len); - skb->truesize = pkt_len + sizeof(struct sk_buff); - ax88179_rx_checksum(skb, pkt_hdr); - return 1; - } + if (pkt_len > skb->len) + return 0;

- ax_skb = skb_clone(skb, GFP_ATOMIC); - if (ax_skb) { + /* Check CRC or runt packet */ + if (((*pkt_hdr & (AX_RXHDR_CRC_ERR | AX_RXHDR_DROP_ERR)) == 0) && + pkt_len >= 2 + ETH_HLEN) { + bool last = (pkt_cnt == 0); + + if (last) { + ax_skb = skb; + } else { + ax_skb = skb_clone(skb, GFP_ATOMIC); + if (!ax_skb) + return 0; + } ax_skb->len = pkt_len; /* Skip IP alignment pseudo header */ skb_pull(ax_skb, 2); skb_set_tail_pointer(ax_skb, ax_skb->len); ax_skb->truesize = pkt_len + sizeof(struct sk_buff); ax88179_rx_checksum(ax_skb, pkt_hdr); + + if (last) + return 1; + usbnet_skb_return(dev, ax_skb); - } else { - return 0; }

- skb_pull(skb, (pkt_len + 7) & 0xFFF8); - pkt_hdr++; + /* Trim this packet away from the SKB */ + if (!skb_pull(skb, (pkt_len + 7) & 0xFFF8)) + return 0; } - return 1; }

static struct sk_buff *

From: John David Anglin dave.anglin@bell.net

commit b7d6f44a0fa716a82969725516dc0b16bc7cd514 upstream.

Rolf Eike Beer reported the following bug:

[1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018 [1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4 [1274934.746891] Hardware name: 9000/785/C8000 [1274934.746891] [1274934.746891] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [1274934.746891] PSW: 00001000000001001111111000001110 Not tainted [1274934.746891] r00-03 000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000 [1274934.746891] r04-07 0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001 [1274934.746891] r08-11 0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001 [1274934.746891] r12-15 0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0 [1274934.746891] r16-19 0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007 [1274934.746891] r20-23 0000000000000006 000000004a368950 0000000000000000 0000000000000001 [1274934.746891] r24-27 0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0 [1274934.746891] r28-31 0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118 [1274934.746891] sr00-03 00000000066e5800 0000000000000000 0000000000000000 00000000066e5800 [1274934.746891] sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [1274934.746891] [1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec [1274934.746891] IIR: 48780030 ISR: 0000000000000000 IOR: 0000004140000018 [1274934.746891] CPU: 3 CR30: 00000040e3a9c000 CR31: ffffffffffffffff [1274934.746891] ORIG_R28: 0000000040acdd58 [1274934.746891] IAOQ[0]: sba_unmap_sg+0xb0/0x118 [1274934.746891] IAOQ[1]: sba_unmap_sg+0xb4/0x118 [1274934.746891] RP(r2): sba_unmap_sg+0xac/0x118 [1274934.746891] Backtrace: [1274934.746891] [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70 [1274934.746891] [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60 [1274934.746891] [<00000000407a3488>] mptscsih_io_done+0x150/0xd70 [1274934.746891] [<0000000040798600>] mpt_interrupt+0x168/0xa68 [1274934.746891] [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278 [1274934.746891] [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8 [1274934.746891] [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0 [1274934.746891] [<00000000402548e0>] generic_handle_irq+0x50/0x70 [1274934.746891] [<000000004019a254>] call_on_stack+0x18/0x24 [1274934.746891] [1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?)

The bug is caused by overrunning the sglist and incorrectly testing sg_dma_len(sglist) before nents. Normally this doesn't cause a crash, but in this case sglist crossed a page boundary. This occurs in the following code:

while (sg_dma_len(sglist) && nents--) {

The fix is simply to test nents first and move the decrement of nents into the loop.

Reported-by: Rolf Eike Beer eike-kernel@sf-tec.de Signed-off-by: John David Anglin dave.anglin@bell.net Cc: stable@vger.kernel.org Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/parisc/sba_iommu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -1063,7 +1063,7 @@ sba_unmap_sg(struct device *dev, struct spin_unlock_irqrestore(&ioc->res_lock, flags); #endif

- while (sg_dma_len(sglist) && nents--) { + while (nents && sg_dma_len(sglist)) {

sba_unmap_page(dev, sg_dma_address(sglist), sg_dma_len(sglist), direction, 0); @@ -1072,6 +1072,7 @@ sba_unmap_sg(struct device *dev, struct ioc->usingle_calls--; /* kluge since call is unmap_sg() */ #endif ++sglist; + nents--; }

DBG_RUN_SG("%s() DONE (nents %d)\n", __func__, nents);

From: Dāvis Mosāns davispuh@gmail.com

commit 2e7be9db125a0bf940c5d65eb5c40d8700f738b5 upstream.

Currently if we get IO error while doing send then we abort without logging information about which file caused issue. So log it to help with debugging.

CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Dāvis Mosāns davispuh@gmail.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/btrfs/send.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -4944,6 +4944,10 @@ static ssize_t fill_read_buf(struct send lock_page(page); if (!PageUptodate(page)) { unlock_page(page); + btrfs_err(fs_info, + "send: IO error at offset %llu for inode %llu root %llu", + page_offset(page), sctx->cur_ino, + sctx->send_root->root_key.objectid); put_page(page); ret = -EIO; break;

From: Yang Xu xuyang2018.jy@fujitsu.com

[ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ]

Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7.

The code that comparing kernel version is from xfstests testsuite ext4/053.

Signed-off-by: Yang Xu xuyang2018.jy@fujitsu.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)

diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 9e73a4fb9b0aa..2c1d1c567f854 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -20,6 +20,9 @@ dev_mounted=-1

# Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +kernel_version=`uname -r | cut -d'.' -f1,2` +kernel_major=${kernel_version%.*} +kernel_minor=${kernel_version#*.}

trap INT

@@ -34,6 +37,20 @@ check_prereqs() fi }

+kernel_gte() +{ + major=${1%.*} + minor=${1#*.} + + if [ $kernel_major -gt $major ]; then + return 0 + elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then + return 0 + fi + + return 1 +} + zram_cleanup() { echo "zram cleanup" @@ -95,6 +112,13 @@ zram_max_streams() { echo "set max_comp_streams to zram device(s)"

+ kernel_gte 4.7 + if [ $? -eq 0 ]; then + echo "The device attribute max_comp_streams was"\ + "deprecated in 4.7" + return 0 + fi + local i=0 for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams"

From: Yang Xu xuyang2018.jy@fujitsu.com

[ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ]

If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup.

The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel.

Signed-off-by: Yang Xu xuyang2018.jy@fujitsu.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/zram/zram.sh | 15 +--- tools/testing/selftests/zram/zram01.sh | 3 +- tools/testing/selftests/zram/zram02.sh | 1 - tools/testing/selftests/zram/zram_lib.sh | 110 +++++++++++++---------- 4 files changed, 66 insertions(+), 63 deletions(-)

diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh index 232e958ec4547..b0b91d9b0dc21 100755 --- a/tools/testing/selftests/zram/zram.sh +++ b/tools/testing/selftests/zram/zram.sh @@ -2,9 +2,6 @@ # SPDX-License-Identifier: GPL-2.0 TCID="zram.sh"

-# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - . ./zram_lib.sh

run_zram () { @@ -18,14 +15,4 @@ echo ""

check_prereqs

-# check zram module exists -MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko -if [ -f $MODULE_PATH ]; then - run_zram -elif [ -b /dev/zram0 ]; then - run_zram -else - echo "$TCID : No zram.ko module or /dev/zram0 device file not found" - echo "$TCID : CONFIG_ZRAM is not set" - exit $ksft_skip -fi +run_zram diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index ac6e4ddd2604e..8abc9965089d1 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -42,7 +42,7 @@ zram_algs="lzo"

zram_fill_fs() { - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "fill zram$i..." local b=0 while [ true ]; do @@ -76,7 +76,6 @@ zram_mount

zram_fill_fs zram_cleanup -zram_unload

if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index 74569b883737f..3768cfd2e5f83 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -45,7 +45,6 @@ zram_set_memlimit zram_makeswap zram_swapoff zram_cleanup -zram_unload

if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 2c1d1c567f854..130d193cbd727 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -14,10 +14,12 @@ # Author: Alexey Kodanev alexey.kodanev@oracle.com # Modified: Naresh Kamboju naresh.kamboju@linaro.org

-MODULE=0 dev_makeswap=-1 dev_mounted=-1 - +dev_start=0 +dev_end=-1 +module_load=-1 +sys_control=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 kernel_version=`uname -r | cut -d'.' -f1,2` @@ -55,57 +57,72 @@ zram_cleanup() { echo "zram cleanup" local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_makeswap); do swapoff /dev/zram$i done

- for i in $(seq 0 $dev_mounted); do + for i in $(seq $dev_start $dev_mounted); do umount /dev/zram$i done

- for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo 1 > /sys/block/zram${i}/reset rm -rf zram$i done

-} + if [ $sys_control -eq 1 ]; then + for i in $(seq $dev_start $dev_end); do + echo $i > /sys/class/zram-control/hot_remove + done + fi

-zram_unload() -{ - if [ $MODULE -ne 0 ] ; then - echo "zram rmmod zram" + if [ $module_load -eq 1 ]; then rmmod zram > /dev/null 2>&1 fi }

zram_load() { - # check zram module exists - MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko - if [ -f $MODULE_PATH ]; then - MODULE=1 - echo "create '$dev_num' zram device(s)" - modprobe zram num_devices=$dev_num - if [ $? -ne 0 ]; then - echo "failed to insert zram module" - exit 1 - fi - - dev_num_created=$(ls /dev/zram* | wc -w) + echo "create '$dev_num' zram device(s)" + + # zram module loaded, new kernel + if [ -d "/sys/class/zram-control" ]; then + echo "zram modules already loaded, kernel supports" \ + "zram-control interface" + dev_start=$(ls /dev/zram* | wc -w) + dev_end=$(($dev_start + $dev_num - 1)) + sys_control=1 + + for i in $(seq $dev_start $dev_end); do + cat /sys/class/zram-control/hot_add > /dev/null + done + + echo "all zram devices (/dev/zram$dev_start~$dev_end" \ + "successfully created" + return 0 + fi

- if [ "$dev_num_created" -ne "$dev_num" ]; then - echo "unexpected num of devices: $dev_num_created" - ERR_CODE=-1 + # detect old kernel or built-in + modprobe zram num_devices=$dev_num + if [ ! -d "/sys/class/zram-control" ]; then + if grep -q '^zram' /proc/modules; then + rmmod zram > /dev/null 2>&1 + if [ $? -ne 0 ]; then + echo "zram module is being used on old kernel" \ + "without zram-control interface" + exit $ksft_skip + fi else - echo "zram load module successful" + echo "test needs CONFIG_ZRAM=m on old kernel without" \ + "zram-control interface" + exit $ksft_skip fi - elif [ -b /dev/zram0 ]; then - echo "/dev/zram0 device file found: OK" - else - echo "ERROR: No zram.ko module or no /dev/zram0 device found" - echo "$TCID : CONFIG_ZRAM is not set" - exit 1 + modprobe zram num_devices=$dev_num fi + + module_load=1 + dev_end=$(($dev_num - 1)) + echo "all zram devices (/dev/zram0~$dev_end) successfully created" }

zram_max_streams() @@ -119,7 +136,7 @@ zram_max_streams() return 0 fi

- local i=0 + local i=$dev_start for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" echo $max_s > $sys_path || \ @@ -131,7 +148,7 @@ zram_max_streams() echo "FAIL can't set max_streams '$max_s', get $max_stream"

i=$(($i + 1)) - echo "$sys_path = '$max_streams' ($i/$dev_num)" + echo "$sys_path = '$max_streams'" done

echo "zram max streams: OK" @@ -141,15 +158,16 @@ zram_compress_alg() { echo "test that we can set compression algorithm"

- local algs=$(cat /sys/block/zram0/comp_algorithm) + local i=$dev_start + local algs=$(cat /sys/block/zram${i}/comp_algorithm) echo "supported algs: $algs" - local i=0 + for alg in $zram_algs; do local sys_path="/sys/block/zram${i}/comp_algorithm" echo "$alg" > $sys_path || \ echo "FAIL can't set '$alg' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$alg' ($i/$dev_num)" + echo "$sys_path = '$alg'" done

echo "zram set compression algorithm: OK" @@ -158,14 +176,14 @@ zram_compress_alg() zram_set_disksizes() { echo "set disk size to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_sizes; do local sys_path="/sys/block/zram${i}/disksize" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path"

i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done

echo "zram set disksizes: OK" @@ -175,14 +193,14 @@ zram_set_memlimit() { echo "set memory limit to zram device(s)"

- local i=0 + local i=$dev_start for ds in $zram_mem_limits; do local sys_path="/sys/block/zram${i}/mem_limit" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path"

i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done

echo "zram set memory limit: OK" @@ -191,8 +209,8 @@ zram_set_memlimit() zram_makeswap() { echo "make swap with zram device(s)" - local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + local i=$dev_start + for i in $(seq $dev_start $dev_end); do mkswap /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -215,7 +233,7 @@ zram_makeswap() zram_swapoff() { local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_end); do swapoff /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -229,7 +247,7 @@ zram_swapoff()

zram_makefs() { - local i=0 + local i=$dev_start for fs in $zram_filesystems; do # if requested fs not supported default it to ext2 which mkfs.$fs > /dev/null 2>&1 || fs=ext2 @@ -248,7 +266,7 @@ zram_makefs() zram_mount() { local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "mount /dev/zram$i" mkdir zram$i mount /dev/zram$i zram$i > /dev/null || \

From: Darrick J. Wong djwong@kernel.org

[ Upstream commit 2719c7160dcfaae1f73a1c0c210ad3281c19022e ]

If we fail to synchronize the filesystem while preparing to freeze the fs, abort the freeze.

Signed-off-by: Darrick J. Wong djwong@kernel.org Reviewed-by: Jan Kara jack@suse.cz Reviewed-by: Christoph Hellwig hch@lst.de Acked-by: Christian Brauner brauner@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/super.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/fs/super.c b/fs/super.c index 1d7461bca1600..819a33e79a011 100644 --- a/fs/super.c +++ b/fs/super.c @@ -1380,11 +1380,9 @@ static void lockdep_sb_freeze_acquire(struct super_block *sb) percpu_rwsem_acquire(sb->s_writers.rw_sem + level, 0, _THIS_IP_); }

-static void sb_freeze_unlock(struct super_block *sb) +static void sb_freeze_unlock(struct super_block *sb, int level) { - int level; - - for (level = SB_FREEZE_LEVELS - 1; level >= 0; level--) + for (level--; level >= 0; level--) percpu_up_write(sb->s_writers.rw_sem + level); }

@@ -1455,7 +1453,14 @@ int freeze_super(struct super_block *sb) sb_wait_write(sb, SB_FREEZE_PAGEFAULT);

/* All writers are done so after syncing there won't be dirty data */ - sync_filesystem(sb); + ret = sync_filesystem(sb); + if (ret) { + sb->s_writers.frozen = SB_UNFROZEN; + sb_freeze_unlock(sb, SB_FREEZE_PAGEFAULT); + wake_up(&sb->s_writers.wait_unfrozen); + deactivate_locked_super(sb); + return ret; + }

/* Now wait for internal filesystem counter */ sb->s_writers.frozen = SB_FREEZE_FS; @@ -1467,7 +1472,7 @@ int freeze_super(struct super_block *sb) printk(KERN_ERR "VFS:Filesystem freeze failed\n"); sb->s_writers.frozen = SB_UNFROZEN; - sb_freeze_unlock(sb); + sb_freeze_unlock(sb, SB_FREEZE_FS); wake_up(&sb->s_writers.wait_unfrozen); deactivate_locked_super(sb); return ret; @@ -1519,7 +1524,7 @@ int thaw_super(struct super_block *sb) }

sb->s_writers.frozen = SB_UNFROZEN; - sb_freeze_unlock(sb); + sb_freeze_unlock(sb, SB_FREEZE_FS); out: wake_up(&sb->s_writers.wait_unfrozen); deactivate_locked_super(sb);

From: Igor Pylypiv ipylypiv@google.com

[ Upstream commit 67d6212afda218d564890d1674bab28e8612170f ]

This reverts commit 774a1221e862b343388347bac9b318767336b20b.

We need to finish all async code before the module init sequence is done. In the reverted commit the PF_USED_ASYNC flag was added to mark a thread that called async_schedule(). Then the PF_USED_ASYNC flag was used to determine whether or not async_synchronize_full() needs to be invoked. This works when modprobe thread is calling async_schedule(), but it does not work if module dispatches init code to a worker thread which then calls async_schedule().

For example, PCI driver probing is invoked from a worker thread based on a node where device is attached:

if (cpu < nr_cpu_ids) error = work_on_cpu(cpu, local_pci_probe, &ddi); else error = local_pci_probe(&ddi);

We end up in a situation where a worker thread gets the PF_USED_ASYNC flag set instead of the modprobe thread. As a result, async_synchronize_full() is not invoked and modprobe completes without waiting for the async code to finish.

The issue was discovered while loading the pm80xx driver: (scsi_mod.scan=async)

modprobe pm80xx worker ... do_init_module() ... pci_call_probe() work_on_cpu(local_pci_probe) local_pci_probe() pm8001_pci_probe() scsi_scan_host() async_schedule() worker->flags |= PF_USED_ASYNC; ... < return from worker > ... if (current->flags & PF_USED_ASYNC) <--- false async_synchronize_full();

Commit 21c3c5d28007 ("block: don't request module during elevator init") fixed the deadlock issue which the reverted commit 774a1221e862 ("module, async: async_synchronize_full() on module init iff async is used") tried to fix.

Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous request_module() from async workers") synchronous module loading from async is not allowed.

Given that the original deadlock issue is fixed and it is no longer allowed to call synchronous request_module() from async we can remove PF_USED_ASYNC flag to make module init consistently invoke async_synchronize_full() unless async module probe is requested.

Signed-off-by: Igor Pylypiv ipylypiv@google.com Reviewed-by: Changyuan Lyu changyuanl@google.com Reviewed-by: Luis Chamberlain mcgrof@kernel.org Acked-by: Tejun Heo tj@kernel.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/sched.h | 1 - kernel/async.c | 3 --- kernel/module.c | 25 +++++-------------------- 3 files changed, 5 insertions(+), 24 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h index 914cc8b180eda..63522a384f5aa 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1346,7 +1346,6 @@ extern struct pid *cad_pid; #define PF_MEMALLOC 0x00000800 /* Allocating memory */ #define PF_NPROC_EXCEEDED 0x00001000 /* set_user() noticed that RLIMIT_NPROC was exceeded */ #define PF_USED_MATH 0x00002000 /* If unset the fpu must be initialized before use */ -#define PF_USED_ASYNC 0x00004000 /* Used async_schedule*(), used by module init */ #define PF_NOFREEZE 0x00008000 /* This thread should not be frozen */ #define PF_FROZEN 0x00010000 /* Frozen for system suspend */ #define PF_KSWAPD 0x00020000 /* I am kswapd */ diff --git a/kernel/async.c b/kernel/async.c index a893d6170944f..4bf1b00a28d86 100644 --- a/kernel/async.c +++ b/kernel/async.c @@ -191,9 +191,6 @@ static async_cookie_t __async_schedule(async_func_t func, void *data, struct asy atomic_inc(&entry_count); spin_unlock_irqrestore(&async_lock, flags);

- /* mark that this task has queued an async job, used by module init */ - current->flags |= PF_USED_ASYNC; - /* schedule for execution */ queue_work(system_unbound_wq, &entry->work);

diff --git a/kernel/module.c b/kernel/module.c index e962096672636..8404b41be7c6f 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -3499,12 +3499,6 @@ static noinline int do_init_module(struct module *mod) } freeinit->module_init = mod->init_layout.base;

- /* - * We want to find out whether @mod uses async during init. Clear - * PF_USED_ASYNC. async_schedule*() will set it. - */ - current->flags &= ~PF_USED_ASYNC; - do_mod_ctors(mod); /* Start the module */ if (mod->init != NULL) @@ -3530,22 +3524,13 @@ static noinline int do_init_module(struct module *mod)

/* * We need to finish all async code before the module init sequence - * is done. This has potential to deadlock. For example, a newly - * detected block device can trigger request_module() of the - * default iosched from async probing task. Once userland helper - * reaches here, async_synchronize_full() will wait on the async - * task waiting on request_module() and deadlock. - * - * This deadlock is avoided by perfomring async_synchronize_full() - * iff module init queued any async jobs. This isn't a full - * solution as it will deadlock the same if module loading from - * async jobs nests more than once; however, due to the various - * constraints, this hack seems to be the best option for now. - * Please refer to the following thread for details. + * is done. This has potential to deadlock if synchronous module + * loading is requested from async (which is not allowed!). * - * http://thread.gmane.org/gmane.linux.kernel/1420814 + * See commit 0fdff3ec6d87 ("async, kmod: warn on synchronous + * request_module() from async workers") for more details. */ - if (!mod->async_probe_requested && (current->flags & PF_USED_ASYNC)) + if (!mod->async_probe_requested) async_synchronize_full();

mutex_lock(&module_mutex);

From: Nicholas Bishop nicholasbishop@google.com

commit 364438fd629f7611a84c8e6d7de91659300f1502 upstream.

The iMac 12,1 does not use the gmux driver for backlight, so the radeon backlight device is needed to set the brightness.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1838 Signed-off-by: Nicholas Bishop nicholasbishop@google.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/radeon/atombios_encoders.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -193,7 +193,8 @@ void radeon_atom_backlight_init(struct r * so don't register a backlight device */ if ((rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) && - (rdev->pdev->device == 0x6741)) + (rdev->pdev->device == 0x6741) && + !dmi_match(DMI_PRODUCT_NAME, "iMac12,1")) return;

if (!radeon_encoder->enc_priv)

From: "Eric W. Biederman" ebiederm@xmission.com

commit 1b5a42d9c85f0e731f01c8d1129001fd8531a8a0 upstream.

In the function bacct_add_task the code reading task->exit_code was introduced in commit f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats"), and it is not entirely clear what the taskstats interface is trying to return as only returning the exit_code of the first task in a process doesn't make a lot of sense.

As best as I can figure the intent is to return task->exit_code after a task exits. The field is returned with per task fields, so the exit_code of the entire process is not wanted. Only the value of the first task is returned so this is not a useful way to get the per task ptrace stop code. The ordinary case of returning this value is returning after a task exits, which also precludes use for getting a ptrace value.

It is common to for the first task of a process to also be the last task of a process so this field may have done something reasonable by accident in testing.

Make ac_exitcode a reliable per task value by always returning it for every exited task.

Setting ac_exitcode in a sensible mannter makes it possible to continue to provide this value going forward.

Cc: Balbir Singh bsingharora@gmail.com Fixes: f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats") Link: https://lkml.kernel.org/r/20220103213312.9144-5-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" ebiederm@xmission.com [sudip: adjust context] Signed-off-by: Sudip Mukherjee sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/tsacct.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/kernel/tsacct.c +++ b/kernel/tsacct.c @@ -46,11 +46,10 @@ void bacct_add_tsk(struct user_namespace /* Convert to seconds for btime */ do_div(delta, USEC_PER_SEC); stats->ac_btime = get_seconds() - delta; - if (thread_group_leader(tsk)) { + if (tsk->flags & PF_EXITING) stats->ac_exitcode = tsk->exit_code; - if (tsk->flags & PF_FORKNOEXEC) - stats->ac_flag |= AFORK; - } + if (thread_group_leader(tsk) && (tsk->flags & PF_FORKNOEXEC)) + stats->ac_flag |= AFORK; if (tsk->flags & PF_SUPERPRIV) stats->ac_flag |= ASU; if (tsk->flags & PF_DUMPCORE)

From: Johannes Berg johannes.berg@intel.com

commit e9848aed147708a06193b40d78493b0ef6abccf2 upstream.

If we run into this error path, we shouldn't unlock the mutex since it's not locked since. Fix this.

Fixes: a6bd005fe92d ("iwlwifi: pcie: fix RF-Kill vs. firmware load race") Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5d16821d1433.Id259699ddf980... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -1240,8 +1240,7 @@ static int iwl_trans_pcie_start_fw(struc /* This may fail if AMT took ownership of the device */ if (iwl_pcie_prepare_card_hw(trans)) { IWL_WARN(trans, "Exit HW not ready\n"); - ret = -EIO; - goto out; + return -EIO; }

iwl_enable_rfkill_int(trans);

From: Miquel Raynal miquel.raynal@bootlin.com

commit bdc120a2bcd834e571ce4115aaddf71ab34495de upstream.

These periods are expressed in time units (microseconds) while 40 and 12 are the number of symbol durations these periods will last. We need to multiply them both with the symbol_duration in order to get these values in microseconds.

Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Link: https://lore.kernel.org/r/20220201180629.93410-2-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt stefan@datenfreihafen.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ieee802154/ca8210.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ieee802154/ca8210.c +++ b/drivers/net/ieee802154/ca8210.c @@ -2976,8 +2976,8 @@ static void ca8210_hw_setup(struct ieee8 ca8210_hw->phy->cca.opt = NL802154_CCA_OPT_ENERGY_CARRIER_AND; ca8210_hw->phy->cca_ed_level = -9800; ca8210_hw->phy->symbol_duration = 16; - ca8210_hw->phy->lifs_period = 40; - ca8210_hw->phy->sifs_period = 12; + ca8210_hw->phy->lifs_period = 40 * ca8210_hw->phy->symbol_duration; + ca8210_hw->phy->sifs_period = 12 * ca8210_hw->phy->symbol_duration; ca8210_hw->flags = IEEE802154_HW_AFILT | IEEE802154_HW_OMIT_CKSUM |

From: Eric Dumazet edumazet@google.com

commit dcd54265c8bc14bd023815e36e2d5f9d66ee1fee upstream.

trace_napi_poll_hit() is reading stat->dev while another thread can write on it from dropmon_net_event()

Use READ_ONCE()/WRITE_ONCE() here, RCU rules are properly enforced already, we only have to take care of load/store tearing.

BUG: KCSAN: data-race in dropmon_net_event / trace_napi_poll_hit

write to 0xffff88816f3ab9c0 of 8 bytes by task 20260 on cpu 1: dropmon_net_event+0xb8/0x2b0 net/core/drop_monitor.c:1579 notifier_call_chain kernel/notifier.c:84 [inline] raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:392 call_netdevice_notifiers_info net/core/dev.c:1919 [inline] call_netdevice_notifiers_extack net/core/dev.c:1931 [inline] call_netdevice_notifiers net/core/dev.c:1945 [inline] unregister_netdevice_many+0x867/0xfb0 net/core/dev.c:10415 ip_tunnel_delete_nets+0x24a/0x280 net/ipv4/ip_tunnel.c:1123 vti_exit_batch_net+0x2a/0x30 net/ipv4/ip_vti.c:515 ops_exit_list net/core/net_namespace.c:173 [inline] cleanup_net+0x4dc/0x8d0 net/core/net_namespace.c:597 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30

read to 0xffff88816f3ab9c0 of 8 bytes by interrupt on cpu 0: trace_napi_poll_hit+0x89/0x1c0 net/core/drop_monitor.c:292 trace_napi_poll include/trace/events/napi.h:14 [inline] __napi_poll+0x36b/0x3f0 net/core/dev.c:6366 napi_poll net/core/dev.c:6432 [inline] net_rx_action+0x29e/0x650 net/core/dev.c:6519 __do_softirq+0x158/0x2de kernel/softirq.c:558 do_softirq+0xb1/0xf0 kernel/softirq.c:459 __local_bh_enable_ip+0x68/0x70 kernel/softirq.c:383 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x33/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:394 [inline] ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline] wg_packet_decrypt_worker+0x73c/0x780 drivers/net/wireguard/receive.c:506 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30

value changed: 0xffff88815883e000 -> 0x0000000000000000

Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 26435 Comm: kworker/0:1 Not tainted 5.17.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker

Fixes: 4ea7e38696c7 ("dropmon: add ability to detect when hardware dropsrxpackets") Signed-off-by: Eric Dumazet edumazet@google.com Cc: Neil Horman nhorman@tuxdriver.com Reported-by: syzbot syzkaller@googlegroups.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/core/drop_monitor.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/net/core/drop_monitor.c +++ b/net/core/drop_monitor.c @@ -219,13 +219,17 @@ static void trace_napi_poll_hit(void *ig

rcu_read_lock(); list_for_each_entry_rcu(new_stat, &hw_stats_list, list) { + struct net_device *dev; + /* * only add a note to our monitor buffer if: * 1) this is the dev we received on * 2) its after the last_rx delta * 3) our rx_dropped count has gone up */ - if ((new_stat->dev == napi->dev) && + /* Paired with WRITE_ONCE() in dropmon_net_event() */ + dev = READ_ONCE(new_stat->dev); + if ((dev == napi->dev) && (time_after(jiffies, new_stat->last_rx + dm_hw_check_delta)) && (napi->dev->stats.rx_dropped != new_stat->last_drop_val)) { trace_drop_common(NULL, NULL); @@ -340,7 +344,10 @@ static int dropmon_net_event(struct noti mutex_lock(&trace_state_mutex); list_for_each_entry_safe(new_stat, tmp, &hw_stats_list, list) { if (new_stat->dev == dev) { - new_stat->dev = NULL; + + /* Paired with READ_ONCE() in trace_napi_poll_hit() */ + WRITE_ONCE(new_stat->dev, NULL); + if (trace_state == TRACE_OFF) { list_del_rcu(&new_stat->list); kfree_rcu(new_stat, rcu);

From: Kees Cook keescook@chromium.org

commit 52a9dab6d892763b2a8334a568bd4e2c1a6fde66 upstream.

GCC 12 correctly reports a potential use-after-free condition in the xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)" when size == 0:

In file included from help.c:12: In function 'xrealloc', inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free] 56 | ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ subcmd-util.h:52:21: note: call to 'realloc' here 52 | void *ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free] 58 | ret = realloc(ptr, 1); | ^~~~~~~~~~~~~~~ subcmd-util.h:52:21: note: call to 'realloc' here 52 | void *ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~

Fixes: 2f4ce5ec1d447beb ("perf tools: Finalize subcmd independence") Reported-by: Valdis Klētnieks valdis.kletnieks@vt.edu Signed-off-by: Kees Kook keescook@chromium.org Tested-by: Valdis Klētnieks valdis.kletnieks@vt.edu Tested-by: Justin M. Forbes jforbes@fedoraproject.org Acked-by: Josh Poimboeuf jpoimboe@redhat.com Cc: linux-hardening@vger.kernel.org Cc: Valdis Klētnieks valdis.kletnieks@vt.edu Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/lib/subcmd/subcmd-util.h | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)

--- a/tools/lib/subcmd/subcmd-util.h +++ b/tools/lib/subcmd/subcmd-util.h @@ -50,15 +50,8 @@ static NORETURN inline void die(const ch static inline void *xrealloc(void *ptr, size_t size) { void *ret = realloc(ptr, size); - if (!ret && !size) - ret = realloc(ptr, 1); - if (!ret) { - ret = realloc(ptr, size); - if (!ret && !size) - ret = realloc(ptr, 1); - if (!ret) - die("Out of memory, realloc failed"); - } + if (!ret) + die("Out of memory, realloc failed"); return ret; }

From: Takashi Iwai tiwai@suse.de

commit dd8e5b161d7fb9cefa1f1d6e35a39b9e1563c8d3 upstream.

By some unknown reason, BIOS on Shenker Dock 15 doesn't set up the codec mask properly for the onboard audio. Let's set the forced codec mask to enable the codec discovery.

Reported-by: dmummenschanz@web.de Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-16443... Link: https://lore.kernel.org/r/20220214100020.8870-2-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/hda_intel.c | 1 + 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1636,6 +1636,7 @@ static struct snd_pci_quirk probe_mask_l /* forced codec slots */ SND_PCI_QUIRK(0x1043, 0x1262, "ASUS W5Fm", 0x103), SND_PCI_QUIRK(0x1046, 0x1262, "ASUS W5F", 0x103), + SND_PCI_QUIRK(0x1558, 0x0351, "Schenker Dock 15", 0x105), /* WinFast VP200 H (Teradici) user reported broken communication */ SND_PCI_QUIRK(0x3a21, 0x040d, "WinFast VP200 H", 0x101), {}

From: Mark Brown broonie@kernel.org

commit 650204ded3703b5817bd4b6a77fa47d333c4f902 upstream.

When writing out a stereo control we discard the change notification from the first channel, meaning that events are only generated based on changes to the second channel. Ensure that we report a change if either channel has changed.

Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220201155629.120510-4-broonie@kernel.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/soc-ops.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/sound/soc/soc-ops.c +++ b/sound/soc/soc-ops.c @@ -528,7 +528,7 @@ int snd_soc_put_volsw_range(struct snd_k unsigned int mask = (1 << fls(max)) - 1; unsigned int invert = mc->invert; unsigned int val, val_mask; - int ret; + int err, ret;

if (invert) val = (max - ucontrol->value.integer.value[0]) & mask; @@ -537,9 +537,10 @@ int snd_soc_put_volsw_range(struct snd_k val_mask = mask << shift; val = val << shift;

- ret = snd_soc_component_update_bits(component, reg, val_mask, val); - if (ret < 0) - return ret; + err = snd_soc_component_update_bits(component, reg, val_mask, val); + if (err < 0) + return err; + ret = err;

if (snd_soc_volsw_is_stereo(mc)) { if (invert) @@ -549,8 +550,12 @@ int snd_soc_put_volsw_range(struct snd_k val_mask = mask << shift; val = val << shift;

- ret = snd_soc_component_update_bits(component, rreg, val_mask, + err = snd_soc_component_update_bits(component, rreg, val_mask, val); + /* Don't discard any error code or drop change flag */ + if (ret == 0 || err < 0) { + ret = err; + } }

return ret;

From: Trond Myklebust trond.myklebust@hammerspace.com

commit e0caaf75d443e02e55e146fd75fe2efc8aed5540 upstream.

Commit ac795161c936 (NFSv4: Handle case where the lookup of a directory fails) [1], part of Linux since 5.17-rc2, introduced a regression, where a symbolic link on an NFS mount to a directory on another NFS does not resolve(?) the first time it is accessed:

Reported-by: Paul Menzel pmenzel@molgen.mpg.de Fixes: ac795161c936 ("NFSv4: Handle case where the lookup of a directory fails") Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Tested-by: Donald Buczek buczek@molgen.mpg.de Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/nfs/dir.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1610,14 +1610,14 @@ no_open: if (!res) { inode = d_inode(dentry); if ((lookup_flags & LOOKUP_DIRECTORY) && inode && - !S_ISDIR(inode->i_mode)) + !(S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))) res = ERR_PTR(-ENOTDIR); else if (inode && S_ISREG(inode->i_mode)) res = ERR_PTR(-EOPENSTALE); } else if (!IS_ERR(res)) { inode = d_inode(res); if ((lookup_flags & LOOKUP_DIRECTORY) && inode && - !S_ISDIR(inode->i_mode)) { + !(S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))) { dput(res); res = ERR_PTR(-ENOTDIR); } else if (inode && S_ISREG(inode->i_mode)) {

From: Eric Dumazet edumazet@google.com

commit 5740d068909676d4bdb5c9c00c37a83df7728909 upstream.

We have been living dangerously, at the mercy of malicious users, abusing TC_ACT_REPEAT, as shown by this syzpot report [1].

Add an arbitrary limit (32) to the number of times an action can return TC_ACT_REPEAT.

v2: switch the limit to 32 instead of 10. Use net_warn_ratelimited() instead of pr_err_once().

[1] (C repro available on demand)

rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 1-...!: (10500 ticks this GP) idle=021/1/0x4000000000000000 softirq=5592/5592 fqs=0 (t=10502 jiffies g=5305 q=190) rcu: rcu_preempt kthread timer wakeup didn't happen for 10502 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 rcu: Possible timer handling issue on cpu=0 timer-softirq=3527 rcu: rcu_preempt kthread starved for 10505 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:I stack:29344 pid: 14 ppid: 2 flags:0x00004000 Call Trace: <TASK> context_switch kernel/sched/core.c:4986 [inline] __schedule+0xab2/0x4db0 kernel/sched/core.c:6295 schedule+0xd2/0x260 kernel/sched/core.c:6368 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1963 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2136 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 3646 Comm: syz-executor358 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rep_nop arch/x86/include/asm/vdso/processor.h:13 [inline] RIP: 0010:cpu_relax arch/x86/include/asm/vdso/processor.h:18 [inline] RIP: 0010:pv_wait_head_or_lock kernel/locking/qspinlock_paravirt.h:437 [inline] RIP: 0010:__pv_queued_spin_lock_slowpath+0x3b8/0xb40 kernel/locking/qspinlock.c:508 Code: 48 89 eb c6 45 01 01 41 bc 00 80 00 00 48 c1 e9 03 83 e3 07 41 be 01 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8d 2c 01 eb 0c <f3> 90 41 83 ec 01 0f 84 72 04 00 00 41 0f b6 45 00 38 d8 7f 08 84 RSP: 0018:ffffc9000283f1b0 EFLAGS: 00000206 RAX: 0000000000000003 RBX: 0000000000000000 RCX: 1ffff1100fc0071e RDX: 0000000000000001 RSI: 0000000000000201 RDI: 0000000000000000 RBP: ffff88807e0038f0 R08: 0000000000000001 R09: ffffffff8ffbf9ff R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000004c1e R13: ffffed100fc0071e R14: 0000000000000001 R15: ffff8880b9c3aa80 FS: 00005555562bf300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffdbfef12b8 CR3: 00000000723c2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> pv_queued_spin_lock_slowpath arch/x86/include/asm/paravirt.h:591 [inline] queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:51 [inline] queued_spin_lock include/asm-generic/qspinlock.h:85 [inline] do_raw_spin_lock+0x200/0x2b0 kernel/locking/spinlock_debug.c:115 spin_lock_bh include/linux/spinlock.h:354 [inline] sch_tree_lock include/net/sch_generic.h:610 [inline] sch_tree_lock include/net/sch_generic.h:605 [inline] prio_tune+0x3b9/0xb50 net/sched/sch_prio.c:211 prio_init+0x5c/0x80 net/sched/sch_prio.c:244 qdisc_create.constprop.0+0x44a/0x10f0 net/sched/sch_api.c:1253 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7ee98aae99 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdbfef12d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffdbfef1300 RCX: 00007f7ee98aae99 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d R10: 000000000000000d R11: 0000000000000246 R12: 00007ffdbfef12f0 R13: 00000000000f4240 R14: 000000000004ca47 R15: 00007ffdbfef12e4 </TASK> INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 2.293 msecs NMI backtrace for cpu 1 CPU: 1 PID: 3260 Comm: kworker/1:3 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: mld mld_ifc_work Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111 nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343 print_cpu_stall kernel/rcu/tree_stall.h:604 [inline] check_cpu_stall kernel/rcu/tree_stall.h:688 [inline] rcu_pending kernel/rcu/tree.c:3919 [inline] rcu_sched_clock_irq.cold+0x5c/0x759 kernel/rcu/tree.c:2617 update_process_times+0x16d/0x200 kernel/time/timer.c:1785 tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226 tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428 __run_hrtimer kernel/time/hrtimer.c:1685 [inline] __hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749 hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline] __sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103 sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 RIP: 0010:__sanitizer_cov_trace_const_cmp4+0xc/0x70 kernel/kcov.c:286 Code: 00 00 00 48 89 7c 30 e8 48 89 4c 30 f0 4c 89 54 d8 20 48 89 10 5b c3 0f 1f 80 00 00 00 00 41 89 f8 bf 03 00 00 00 4c 8b 14 24 <89> f1 65 48 8b 34 25 00 70 02 00 e8 14 f9 ff ff 84 c0 74 4b 48 8b RSP: 0018:ffffc90002c5eea8 EFLAGS: 00000246 RAX: 0000000000000007 RBX: ffff88801c625800 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: ffff8880137d3100 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff874fcd88 R11: 0000000000000000 R12: ffff88801d692dc0 R13: ffff8880137d3104 R14: 0000000000000000 R15: ffff88801d692de8 tcf_police_act+0x358/0x11d0 net/sched/act_police.c:256 tcf_action_exec net/sched/act_api.c:1049 [inline] tcf_action_exec+0x1a6/0x530 net/sched/act_api.c:1026 tcf_exts_exec include/net/pkt_cls.h:326 [inline] route4_classify+0xef0/0x1400 net/sched/cls_route.c:179 __tcf_classify net/sched/cls_api.c:1549 [inline] tcf_classify+0x3e8/0x9d0 net/sched/cls_api.c:1615 prio_classify net/sched/sch_prio.c:42 [inline] prio_enqueue+0x3a7/0x790 net/sched/sch_prio.c:75 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3668 __dev_xmit_skb net/core/dev.c:3756 [inline] __dev_queue_xmit+0x1f61/0x3660 net/core/dev.c:4081 neigh_hh_output include/net/neighbour.h:533 [inline] neigh_output include/net/neighbour.h:547 [inline] ip_finish_output2+0x14dc/0x2170 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:306 [inline] __ip_finish_output+0x396/0x650 net/ipv4/ip_output.c:288 ip_finish_output+0x32/0x200 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip_output+0x196/0x310 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:451 [inline] ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:126 iptunnel_xmit+0x628/0xa50 net/ipv4/ip_tunnel_core.c:82 geneve_xmit_skb drivers/net/geneve.c:966 [inline] geneve_xmit+0x10c8/0x3530 drivers/net/geneve.c:1077 __netdev_start_xmit include/linux/netdevice.h:4683 [inline] netdev_start_xmit include/linux/netdevice.h:4697 [inline] xmit_one net/core/dev.c:3473 [inline] dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3489 __dev_queue_xmit+0x2985/0x3660 net/core/dev.c:4116 neigh_hh_output include/net/neighbour.h:533 [inline] neigh_output include/net/neighbour.h:547 [inline] ip6_finish_output2+0xf7a/0x14f0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170 ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:451 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] mld_sendpack+0x9a3/0xe40 net/ipv6/mcast.c:1826 mld_send_cr net/ipv6/mcast.c:2127 [inline] mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2659 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307 worker_thread+0x657/0x1110 kernel/workqueue.c:2454 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ---------------- Code disassembly (best guess): 0: 48 89 eb mov %rbp,%rbx 3: c6 45 01 01 movb $0x1,0x1(%rbp) 7: 41 bc 00 80 00 00 mov $0x8000,%r12d d: 48 c1 e9 03 shr $0x3,%rcx 11: 83 e3 07 and $0x7,%ebx 14: 41 be 01 00 00 00 mov $0x1,%r14d 1a: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 21: fc ff df 24: 4c 8d 2c 01 lea (%rcx,%rax,1),%r13 28: eb 0c jmp 0x36 * 2a: f3 90 pause <-- trapping instruction 2c: 41 83 ec 01 sub $0x1,%r12d 30: 0f 84 72 04 00 00 je 0x4a8 36: 41 0f b6 45 00 movzbl 0x0(%r13),%eax 3b: 38 d8 cmp %bl,%al 3d: 7f 08 jg 0x47 3f: 84 .byte 0x84

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet edumazet@google.com Acked-by: Jamal Hadi Salim jhs@mojatatu.com Cc: Cong Wang xiyou.wangcong@gmail.com Cc: Jiri Pirko jiri@resnulli.us Reported-by: syzbot syzkaller@googlegroups.com Link: https://lore.kernel.org/r/20220215235305.3272331-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/sched/act_api.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)

--- a/net/sched/act_api.c +++ b/net/sched/act_api.c @@ -482,15 +482,24 @@ int tcf_action_exec(struct sk_buff *skb, restart_act_graph: for (i = 0; i < nr_actions; i++) { const struct tc_action *a = actions[i]; + int repeat_ttl;

if (jmp_prgcnt > 0) { jmp_prgcnt -= 1; continue; } + + repeat_ttl = 32; repeat: ret = a->ops->act(skb, a, res); - if (ret == TC_ACT_REPEAT) - goto repeat; /* we need a ttl - JHS */ + + if (unlikely(ret == TC_ACT_REPEAT)) { + if (--repeat_ttl != 0) + goto repeat; + /* suspicious opcode, stop pipeline */ + net_warn_ratelimited("TC_ACT_REPEAT abuse ?\n"); + return TC_ACT_OK; + }

if (TC_ACT_EXT_CMP(ret, TC_ACT_JUMP)) { jmp_prgcnt = ret & TCA_ACT_MAX_PRIO_MASK;

From: Rafał Miłecki rafal@milecki.pl

commit 834cea3a252ed4847db076a769ad9efe06afe2d5 upstream.

DSL and CM (Cable Modem) support 8 B max transfer size and have a custom DT binding for that reason. This driver was checking for a wrong "compatible" however which resulted in an incorrect setup.

Fixes: e2e5a2c61837 ("i2c: brcmstb: Adding support for CM and DSL SoCs") Signed-off-by: Rafał Miłecki rafal@milecki.pl Acked-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/i2c/busses/i2c-brcmstb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-brcmstb.c +++ b/drivers/i2c/busses/i2c-brcmstb.c @@ -645,7 +645,7 @@ static int brcmstb_i2c_probe(struct plat

/* set the data in/out register size for compatible SoCs */ if (of_device_is_compatible(dev->device->of_node, - "brcmstb,brcmper-i2c")) + "brcm,brcmper-i2c")) dev->data_regsz = sizeof(u8); else dev->data_regsz = sizeof(u32);

From: david regan dregan@mail.com

[ Upstream commit 36415a7964711822e63695ea67fede63979054d9 ]

The brcmnand driver contains a bug in which if a page (example 2k byte) is read from the parallel/ONFI NAND and within that page a subpage (512 byte) has correctable errors which is followed by a subpage with uncorrectable errors, the page read will return the wrong status of correctable (as opposed to the actual status of uncorrectable.)

The bug is in function brcmnand_read_by_pio where there is a check for uncorrectable bits which will be preempted if a previous status for correctable bits is detected.

The fix is to stop checking for bad bits only if we already have a bad bits status.

Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: david regan dregan@mail.com Reviewed-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Link: https://lore.kernel.org/linux-mtd/trinity-478e0c09-9134-40e8-8f8c-31c371225e... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mtd/nand/brcmnand/brcmnand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c index be4c6f256e807..2741147481c0a 100644 --- a/drivers/mtd/nand/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/brcmnand/brcmnand.c @@ -1673,7 +1673,7 @@ static int brcmnand_read_by_pio(struct mtd_info *mtd, struct nand_chip *chip, mtd->oobsize / trans, host->hwcfg.sector_size_1k);

- if (!ret) { + if (ret != -EBADMSG) { *err_addr = brcmnand_get_uncorrecc_addr(ctrl);

if (*err_addr)

From: Trond Myklebust trond.myklebust@hammerspace.com

[ Upstream commit d19e0183a88306acda07f4a01fedeeffe2a2a06b ]

The result of the writeback, whether it is an ENOSPC or an EIO, or anything else, does not inhibit the NFS client from reporting the correct file timestamps.

Fixes: 79566ef018f5 ("NFS: Getattr doesn't require data sync semantics") Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/inode.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index ad01d4fb795ee..5774dc2c5c2bf 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -740,11 +740,8 @@ int nfs_getattr(const struct path *path, struct kstat *stat,

trace_nfs_getattr_enter(inode); /* Flush out writes to the server in order to update c/mtime. */ - if (S_ISREG(inode->i_mode)) { - err = filemap_write_and_wait(inode->i_mapping); - if (err) - goto out; - } + if (S_ISREG(inode->i_mode)) + filemap_write_and_wait(inode->i_mapping);

/* * We may force a getattr if the user cares about atime.

From: Zoltán Böszörményi zboszor@gmail.com

[ Upstream commit c8ea23d5fa59f28302d4e3370c75d9c308e64410 ]

This device is a CF card, or possibly an SSD in CF form factor. It supports NCQ and high speed DMA.

While it also advertises TRIM support, I/O errors are reported when the discard mount option fstrim is used. TRIM also fails when disabling NCQ and not just as an NCQ command.

TRIM must be disabled for this device.

Signed-off-by: Zoltán Böszörményi zboszor@gmail.com Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/libata-core.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 8ec71243cdcca..791374199e227 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4603,6 +4603,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {

/* devices that don't properly handle TRIM commands */ { "SuperSSpeed S238*", NULL, ATA_HORKAGE_NOTRIM, }, + { "M88V29*", NULL, ATA_HORKAGE_NOTRIM, },

/* * As defined, the DRAT (Deterministic Read After Trim) and RZAT

From: Slark Xiao slark_xiao@163.com

[ Upstream commit 8ecbb179286cbc91810c16caeb3396e06305cd0c ]

Dell DW5829e same as DW5821e except the CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. Also, DW5829e includes normal and eSIM type. Please see below test evidence:

T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

Signed-off-by: Slark Xiao slark_xiao@163.com Acked-by: Bjørn Mork bjorn@mork.no Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/qmi_wwan.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 928219ab09128..e8d57954596d2 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1347,6 +1347,8 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x413c, 0x81d7, 0)}, /* Dell Wireless 5821e */ {QMI_FIXED_INTF(0x413c, 0x81d7, 1)}, /* Dell Wireless 5821e preproduction config */ {QMI_FIXED_INTF(0x413c, 0x81e0, 0)}, /* Dell Wireless 5821e with eSIM support*/ + {QMI_FIXED_INTF(0x413c, 0x81e4, 0)}, /* Dell Wireless 5829e with eSIM support*/ + {QMI_FIXED_INTF(0x413c, 0x81e6, 0)}, /* Dell Wireless 5829e */ {QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */ {QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)}, /* HP lt4120 Snapdragon X5 LTE */ {QMI_FIXED_INTF(0x22de, 0x9061, 3)}, /* WeTelecom WPD-600N */