From: Paweł Jabłoński pawel.jablonski@intel.com

[ Upstream commit ae1e29f671b467f3e9e9aa2b82ee40e4300ea810 ]

Add possibility to change a VF mac address from host side without reloading the VF driver on the guest side. Without this patch it is not possible to change the VF mac because executing i40evf_virtchnl_completion function with VIRTCHNL_OP_GET_VF_RESOURCES opcode resets the VF mac address to previous value.

Signed-off-by: Paweł Jabłoński pawel.jablonski@intel.com Tested-by: Andrew Bowers andrewx.bowers@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Stable-dep-of: 32d57f667f87 ("iavf: fix inverted Rx hash condition leading to disabled hash") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 8 +++++--- drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c | 11 +++++++++-- 2 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 240083201dbf4..1527c67b487b2 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -2595,7 +2595,7 @@ static inline int i40e_check_vf_permission(struct i40e_vf *vf, !is_multicast_ether_addr(addr) && vf->pf_set_mac && !ether_addr_equal(addr, vf->default_lan_addr.addr)) { dev_err(&pf->pdev->dev, - "VF attempting to override administratively set MAC address, reload the VF driver to resume normal operation\n"); + "VF attempting to override administratively set MAC address, bring down and up the VF interface to resume normal operation\n"); return -EPERM; } } @@ -4019,9 +4019,11 @@ int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac) mac, vf_id); }

- /* Force the VF driver stop so it has to reload with new MAC address */ + /* Force the VF interface down so it has to bring up with new MAC + * address + */ i40e_vc_disable_vf(vf); - dev_info(&pf->pdev->dev, "Reload the VF driver to make this change effective.\n"); + dev_info(&pf->pdev->dev, "Bring down and up the VF interface to make this change effective.\n");

error_param: return ret; diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c index 94dabc9d89f73..6579dabab78cf 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c @@ -1362,8 +1362,15 @@ void i40evf_virtchnl_completion(struct i40evf_adapter *adapter, memcpy(adapter->vf_res, msg, min(msglen, len)); i40evf_validate_num_queues(adapter); i40e_vf_parse_hw_config(&adapter->hw, adapter->vf_res); - /* restore current mac address */ - ether_addr_copy(adapter->hw.mac.addr, netdev->dev_addr); + if (is_zero_ether_addr(adapter->hw.mac.addr)) { + /* restore current mac address */ + ether_addr_copy(adapter->hw.mac.addr, netdev->dev_addr); + } else { + /* refresh current mac address if changed */ + ether_addr_copy(netdev->dev_addr, adapter->hw.mac.addr); + ether_addr_copy(netdev->perm_addr, + adapter->hw.mac.addr); + } i40evf_process_config(adapter); } break;

From: Jesse Brandeburg jesse.brandeburg@intel.com

[ Upstream commit ee61022acfffcd4468bc3c31f4fd61503f725999 ]

Remove a bunch of unused code and reformat a few lines. Also remove some now un-necessary files.

Signed-off-by: Jesse Brandeburg jesse.brandeburg@intel.com Tested-by: Andrew Bowers andrewx.bowers@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Stable-dep-of: 32d57f667f87 ("iavf: fix inverted Rx hash condition leading to disabled hash") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/iavf/i40e_adminq.c | 27 - .../net/ethernet/intel/iavf/i40e_adminq_cmd.h | 2277 +---------------- drivers/net/ethernet/intel/iavf/i40e_common.c | 338 --- drivers/net/ethernet/intel/iavf/i40e_hmc.h | 215 -- .../net/ethernet/intel/iavf/i40e_lan_hmc.h | 158 -- .../net/ethernet/intel/iavf/i40e_prototype.h | 65 +- .../net/ethernet/intel/iavf/i40e_register.h | 245 -- drivers/net/ethernet/intel/iavf/i40e_type.h | 783 +----- 8 files changed, 50 insertions(+), 4058 deletions(-) delete mode 100644 drivers/net/ethernet/intel/iavf/i40e_hmc.h delete mode 100644 drivers/net/ethernet/intel/iavf/i40e_lan_hmc.h

diff --git a/drivers/net/ethernet/intel/iavf/i40e_adminq.c b/drivers/net/ethernet/intel/iavf/i40e_adminq.c index 21a0dbf6ccf61..32e0e2d9cdc53 100644 --- a/drivers/net/ethernet/intel/iavf/i40e_adminq.c +++ b/drivers/net/ethernet/intel/iavf/i40e_adminq.c @@ -7,16 +7,6 @@ #include "i40e_adminq.h" #include "i40e_prototype.h"

-/** - * i40e_is_nvm_update_op - return true if this is an NVM update operation - * @desc: API request descriptor - **/ -static inline bool i40e_is_nvm_update_op(struct i40e_aq_desc *desc) -{ - return (desc->opcode == i40e_aqc_opc_nvm_erase) || - (desc->opcode == i40e_aqc_opc_nvm_update); -} - /** * i40e_adminq_init_regs - Initialize AdminQ registers * @hw: pointer to the hardware structure @@ -569,9 +559,6 @@ i40e_status i40evf_shutdown_adminq(struct i40e_hw *hw) i40e_shutdown_asq(hw); i40e_shutdown_arq(hw);

- if (hw->nvm_buff.va) - i40e_free_virt_mem(hw, &hw->nvm_buff); - return ret_code; }

@@ -951,17 +938,3 @@ i40e_status i40evf_clean_arq_element(struct i40e_hw *hw,

return ret_code; } - -void i40evf_resume_aq(struct i40e_hw *hw) -{ - /* Registers are reset after PF reset */ - hw->aq.asq.next_to_use = 0; - hw->aq.asq.next_to_clean = 0; - - i40e_config_asq_regs(hw); - - hw->aq.arq.next_to_use = 0; - hw->aq.arq.next_to_clean = 0; - - i40e_config_arq_regs(hw); -} diff --git a/drivers/net/ethernet/intel/iavf/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/iavf/i40e_adminq_cmd.h index 5fd8529465d48..493bdc5331f7b 100644 --- a/drivers/net/ethernet/intel/iavf/i40e_adminq_cmd.h +++ b/drivers/net/ethernet/intel/iavf/i40e_adminq_cmd.h @@ -307,33 +307,6 @@ enum i40e_admin_queue_opc { */ #define I40E_CHECK_CMD_LENGTH(X) I40E_CHECK_STRUCT_LEN(16, X)

-/* internal (0x00XX) commands */ - -/* Get version (direct 0x0001) */ -struct i40e_aqc_get_version { - __le32 rom_ver; - __le32 fw_build; - __le16 fw_major; - __le16 fw_minor; - __le16 api_major; - __le16 api_minor; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_get_version); - -/* Send driver version (indirect 0x0002) */ -struct i40e_aqc_driver_version { - u8 driver_major_ver; - u8 driver_minor_ver; - u8 driver_build_ver; - u8 driver_subbuild_ver; - u8 reserved[4]; - __le32 address_high; - __le32 address_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_driver_version); - /* Queue Shutdown (direct 0x0003) */ struct i40e_aqc_queue_shutdown { __le32 driver_unloading; @@ -343,490 +316,6 @@ struct i40e_aqc_queue_shutdown {

I40E_CHECK_CMD_LENGTH(i40e_aqc_queue_shutdown);

-/* Set PF context (0x0004, direct) */ -struct i40e_aqc_set_pf_context { - u8 pf_id; - u8 reserved[15]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_set_pf_context); - -/* Request resource ownership (direct 0x0008) - * Release resource ownership (direct 0x0009) - */ -#define I40E_AQ_RESOURCE_NVM 1 -#define I40E_AQ_RESOURCE_SDP 2 -#define I40E_AQ_RESOURCE_ACCESS_READ 1 -#define I40E_AQ_RESOURCE_ACCESS_WRITE 2 -#define I40E_AQ_RESOURCE_NVM_READ_TIMEOUT 3000 -#define I40E_AQ_RESOURCE_NVM_WRITE_TIMEOUT 180000 - -struct i40e_aqc_request_resource { - __le16 resource_id; - __le16 access_type; - __le32 timeout; - __le32 resource_number; - u8 reserved[4]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_request_resource); - -/* Get function capabilities (indirect 0x000A) - * Get device capabilities (indirect 0x000B) - */ -struct i40e_aqc_list_capabilites { - u8 command_flags; -#define I40E_AQ_LIST_CAP_PF_INDEX_EN 1 - u8 pf_index; - u8 reserved[2]; - __le32 count; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_list_capabilites); - -struct i40e_aqc_list_capabilities_element_resp { - __le16 id; - u8 major_rev; - u8 minor_rev; - __le32 number; - __le32 logical_id; - __le32 phys_id; - u8 reserved[16]; -}; - -/* list of caps */ - -#define I40E_AQ_CAP_ID_SWITCH_MODE 0x0001 -#define I40E_AQ_CAP_ID_MNG_MODE 0x0002 -#define I40E_AQ_CAP_ID_NPAR_ACTIVE 0x0003 -#define I40E_AQ_CAP_ID_OS2BMC_CAP 0x0004 -#define I40E_AQ_CAP_ID_FUNCTIONS_VALID 0x0005 -#define I40E_AQ_CAP_ID_ALTERNATE_RAM 0x0006 -#define I40E_AQ_CAP_ID_WOL_AND_PROXY 0x0008 -#define I40E_AQ_CAP_ID_SRIOV 0x0012 -#define I40E_AQ_CAP_ID_VF 0x0013 -#define I40E_AQ_CAP_ID_VMDQ 0x0014 -#define I40E_AQ_CAP_ID_8021QBG 0x0015 -#define I40E_AQ_CAP_ID_8021QBR 0x0016 -#define I40E_AQ_CAP_ID_VSI 0x0017 -#define I40E_AQ_CAP_ID_DCB 0x0018 -#define I40E_AQ_CAP_ID_FCOE 0x0021 -#define I40E_AQ_CAP_ID_ISCSI 0x0022 -#define I40E_AQ_CAP_ID_RSS 0x0040 -#define I40E_AQ_CAP_ID_RXQ 0x0041 -#define I40E_AQ_CAP_ID_TXQ 0x0042 -#define I40E_AQ_CAP_ID_MSIX 0x0043 -#define I40E_AQ_CAP_ID_VF_MSIX 0x0044 -#define I40E_AQ_CAP_ID_FLOW_DIRECTOR 0x0045 -#define I40E_AQ_CAP_ID_1588 0x0046 -#define I40E_AQ_CAP_ID_IWARP 0x0051 -#define I40E_AQ_CAP_ID_LED 0x0061 -#define I40E_AQ_CAP_ID_SDP 0x0062 -#define I40E_AQ_CAP_ID_MDIO 0x0063 -#define I40E_AQ_CAP_ID_WSR_PROT 0x0064 -#define I40E_AQ_CAP_ID_NVM_MGMT 0x0080 -#define I40E_AQ_CAP_ID_FLEX10 0x00F1 -#define I40E_AQ_CAP_ID_CEM 0x00F2 - -/* Set CPPM Configuration (direct 0x0103) */ -struct i40e_aqc_cppm_configuration { - __le16 command_flags; -#define I40E_AQ_CPPM_EN_LTRC 0x0800 -#define I40E_AQ_CPPM_EN_DMCTH 0x1000 -#define I40E_AQ_CPPM_EN_DMCTLX 0x2000 -#define I40E_AQ_CPPM_EN_HPTC 0x4000 -#define I40E_AQ_CPPM_EN_DMARC 0x8000 - __le16 ttlx; - __le32 dmacr; - __le16 dmcth; - u8 hptc; - u8 reserved; - __le32 pfltrc; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_cppm_configuration); - -/* Set ARP Proxy command / response (indirect 0x0104) */ -struct i40e_aqc_arp_proxy_data { - __le16 command_flags; -#define I40E_AQ_ARP_INIT_IPV4 0x0800 -#define I40E_AQ_ARP_UNSUP_CTL 0x1000 -#define I40E_AQ_ARP_ENA 0x2000 -#define I40E_AQ_ARP_ADD_IPV4 0x4000 -#define I40E_AQ_ARP_DEL_IPV4 0x8000 - __le16 table_id; - __le32 enabled_offloads; -#define I40E_AQ_ARP_DIRECTED_OFFLOAD_ENABLE 0x00000020 -#define I40E_AQ_ARP_OFFLOAD_ENABLE 0x00000800 - __le32 ip_addr; - u8 mac_addr[6]; - u8 reserved[2]; -}; - -I40E_CHECK_STRUCT_LEN(0x14, i40e_aqc_arp_proxy_data); - -/* Set NS Proxy Table Entry Command (indirect 0x0105) */ -struct i40e_aqc_ns_proxy_data { - __le16 table_idx_mac_addr_0; - __le16 table_idx_mac_addr_1; - __le16 table_idx_ipv6_0; - __le16 table_idx_ipv6_1; - __le16 control; -#define I40E_AQ_NS_PROXY_ADD_0 0x0001 -#define I40E_AQ_NS_PROXY_DEL_0 0x0002 -#define I40E_AQ_NS_PROXY_ADD_1 0x0004 -#define I40E_AQ_NS_PROXY_DEL_1 0x0008 -#define I40E_AQ_NS_PROXY_ADD_IPV6_0 0x0010 -#define I40E_AQ_NS_PROXY_DEL_IPV6_0 0x0020 -#define I40E_AQ_NS_PROXY_ADD_IPV6_1 0x0040 -#define I40E_AQ_NS_PROXY_DEL_IPV6_1 0x0080 -#define I40E_AQ_NS_PROXY_COMMAND_SEQ 0x0100 -#define I40E_AQ_NS_PROXY_INIT_IPV6_TBL 0x0200 -#define I40E_AQ_NS_PROXY_INIT_MAC_TBL 0x0400 -#define I40E_AQ_NS_PROXY_OFFLOAD_ENABLE 0x0800 -#define I40E_AQ_NS_PROXY_DIRECTED_OFFLOAD_ENABLE 0x1000 - u8 mac_addr_0[6]; - u8 mac_addr_1[6]; - u8 local_mac_addr[6]; - u8 ipv6_addr_0[16]; /* Warning! spec specifies BE byte order */ - u8 ipv6_addr_1[16]; -}; - -I40E_CHECK_STRUCT_LEN(0x3c, i40e_aqc_ns_proxy_data); - -/* Manage LAA Command (0x0106) - obsolete */ -struct i40e_aqc_mng_laa { - __le16 command_flags; -#define I40E_AQ_LAA_FLAG_WR 0x8000 - u8 reserved[2]; - __le32 sal; - __le16 sah; - u8 reserved2[6]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_mng_laa); - -/* Manage MAC Address Read Command (indirect 0x0107) */ -struct i40e_aqc_mac_address_read { - __le16 command_flags; -#define I40E_AQC_LAN_ADDR_VALID 0x10 -#define I40E_AQC_SAN_ADDR_VALID 0x20 -#define I40E_AQC_PORT_ADDR_VALID 0x40 -#define I40E_AQC_WOL_ADDR_VALID 0x80 -#define I40E_AQC_MC_MAG_EN_VALID 0x100 -#define I40E_AQC_ADDR_VALID_MASK 0x3F0 - u8 reserved[6]; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_mac_address_read); - -struct i40e_aqc_mac_address_read_data { - u8 pf_lan_mac[6]; - u8 pf_san_mac[6]; - u8 port_mac[6]; - u8 pf_wol_mac[6]; -}; - -I40E_CHECK_STRUCT_LEN(24, i40e_aqc_mac_address_read_data); - -/* Manage MAC Address Write Command (0x0108) */ -struct i40e_aqc_mac_address_write { - __le16 command_flags; -#define I40E_AQC_WRITE_TYPE_LAA_ONLY 0x0000 -#define I40E_AQC_WRITE_TYPE_LAA_WOL 0x4000 -#define I40E_AQC_WRITE_TYPE_PORT 0x8000 -#define I40E_AQC_WRITE_TYPE_UPDATE_MC_MAG 0xC000 -#define I40E_AQC_WRITE_TYPE_MASK 0xC000 - - __le16 mac_sah; - __le32 mac_sal; - u8 reserved[8]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_mac_address_write); - -/* PXE commands (0x011x) */ - -/* Clear PXE Command and response (direct 0x0110) */ -struct i40e_aqc_clear_pxe { - u8 rx_cnt; - u8 reserved[15]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_clear_pxe); - -/* Set WoL Filter (0x0120) */ - -struct i40e_aqc_set_wol_filter { - __le16 filter_index; -#define I40E_AQC_MAX_NUM_WOL_FILTERS 8 -#define I40E_AQC_SET_WOL_FILTER_TYPE_MAGIC_SHIFT 15 -#define I40E_AQC_SET_WOL_FILTER_TYPE_MAGIC_MASK (0x1 << \ - I40E_AQC_SET_WOL_FILTER_TYPE_MAGIC_SHIFT) - -#define I40E_AQC_SET_WOL_FILTER_INDEX_SHIFT 0 -#define I40E_AQC_SET_WOL_FILTER_INDEX_MASK (0x7 << \ - I40E_AQC_SET_WOL_FILTER_INDEX_SHIFT) - __le16 cmd_flags; -#define I40E_AQC_SET_WOL_FILTER 0x8000 -#define I40E_AQC_SET_WOL_FILTER_NO_TCO_WOL 0x4000 -#define I40E_AQC_SET_WOL_FILTER_WOL_PRESERVE_ON_PFR 0x2000 -#define I40E_AQC_SET_WOL_FILTER_ACTION_CLEAR 0 -#define I40E_AQC_SET_WOL_FILTER_ACTION_SET 1 - __le16 valid_flags; -#define I40E_AQC_SET_WOL_FILTER_ACTION_VALID 0x8000 -#define I40E_AQC_SET_WOL_FILTER_NO_TCO_ACTION_VALID 0x4000 - u8 reserved[2]; - __le32 address_high; - __le32 address_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_set_wol_filter); - -struct i40e_aqc_set_wol_filter_data { - u8 filter[128]; - u8 mask[16]; -}; - -I40E_CHECK_STRUCT_LEN(0x90, i40e_aqc_set_wol_filter_data); - -/* Get Wake Reason (0x0121) */ - -struct i40e_aqc_get_wake_reason_completion { - u8 reserved_1[2]; - __le16 wake_reason; -#define I40E_AQC_GET_WAKE_UP_REASON_WOL_REASON_MATCHED_INDEX_SHIFT 0 -#define I40E_AQC_GET_WAKE_UP_REASON_WOL_REASON_MATCHED_INDEX_MASK (0xFF << \ - I40E_AQC_GET_WAKE_UP_REASON_WOL_REASON_MATCHED_INDEX_SHIFT) -#define I40E_AQC_GET_WAKE_UP_REASON_WOL_REASON_RESERVED_SHIFT 8 -#define I40E_AQC_GET_WAKE_UP_REASON_WOL_REASON_RESERVED_MASK (0xFF << \ - I40E_AQC_GET_WAKE_UP_REASON_WOL_REASON_RESERVED_SHIFT) - u8 reserved_2[12]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_get_wake_reason_completion); - -/* Switch configuration commands (0x02xx) */ - -/* Used by many indirect commands that only pass an seid and a buffer in the - * command - */ -struct i40e_aqc_switch_seid { - __le16 seid; - u8 reserved[6]; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_switch_seid); - -/* Get Switch Configuration command (indirect 0x0200) - * uses i40e_aqc_switch_seid for the descriptor - */ -struct i40e_aqc_get_switch_config_header_resp { - __le16 num_reported; - __le16 num_total; - u8 reserved[12]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_get_switch_config_header_resp); - -struct i40e_aqc_switch_config_element_resp { - u8 element_type; -#define I40E_AQ_SW_ELEM_TYPE_MAC 1 -#define I40E_AQ_SW_ELEM_TYPE_PF 2 -#define I40E_AQ_SW_ELEM_TYPE_VF 3 -#define I40E_AQ_SW_ELEM_TYPE_EMP 4 -#define I40E_AQ_SW_ELEM_TYPE_BMC 5 -#define I40E_AQ_SW_ELEM_TYPE_PV 16 -#define I40E_AQ_SW_ELEM_TYPE_VEB 17 -#define I40E_AQ_SW_ELEM_TYPE_PA 18 -#define I40E_AQ_SW_ELEM_TYPE_VSI 19 - u8 revision; -#define I40E_AQ_SW_ELEM_REV_1 1 - __le16 seid; - __le16 uplink_seid; - __le16 downlink_seid; - u8 reserved[3]; - u8 connection_type; -#define I40E_AQ_CONN_TYPE_REGULAR 0x1 -#define I40E_AQ_CONN_TYPE_DEFAULT 0x2 -#define I40E_AQ_CONN_TYPE_CASCADED 0x3 - __le16 scheduler_id; - __le16 element_info; -}; - -I40E_CHECK_STRUCT_LEN(0x10, i40e_aqc_switch_config_element_resp); - -/* Get Switch Configuration (indirect 0x0200) - * an array of elements are returned in the response buffer - * the first in the array is the header, remainder are elements - */ -struct i40e_aqc_get_switch_config_resp { - struct i40e_aqc_get_switch_config_header_resp header; - struct i40e_aqc_switch_config_element_resp element[1]; -}; - -I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_get_switch_config_resp); - -/* Add Statistics (direct 0x0201) - * Remove Statistics (direct 0x0202) - */ -struct i40e_aqc_add_remove_statistics { - __le16 seid; - __le16 vlan; - __le16 stat_index; - u8 reserved[10]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_remove_statistics); - -/* Set Port Parameters command (direct 0x0203) */ -struct i40e_aqc_set_port_parameters { - __le16 command_flags; -#define I40E_AQ_SET_P_PARAMS_SAVE_BAD_PACKETS 1 -#define I40E_AQ_SET_P_PARAMS_PAD_SHORT_PACKETS 2 /* must set! */ -#define I40E_AQ_SET_P_PARAMS_DOUBLE_VLAN_ENA 4 - __le16 bad_frame_vsi; -#define I40E_AQ_SET_P_PARAMS_BFRAME_SEID_SHIFT 0x0 -#define I40E_AQ_SET_P_PARAMS_BFRAME_SEID_MASK 0x3FF - __le16 default_seid; /* reserved for command */ - u8 reserved[10]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_set_port_parameters); - -/* Get Switch Resource Allocation (indirect 0x0204) */ -struct i40e_aqc_get_switch_resource_alloc { - u8 num_entries; /* reserved for command */ - u8 reserved[7]; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_get_switch_resource_alloc); - -/* expect an array of these structs in the response buffer */ -struct i40e_aqc_switch_resource_alloc_element_resp { - u8 resource_type; -#define I40E_AQ_RESOURCE_TYPE_VEB 0x0 -#define I40E_AQ_RESOURCE_TYPE_VSI 0x1 -#define I40E_AQ_RESOURCE_TYPE_MACADDR 0x2 -#define I40E_AQ_RESOURCE_TYPE_STAG 0x3 -#define I40E_AQ_RESOURCE_TYPE_ETAG 0x4 -#define I40E_AQ_RESOURCE_TYPE_MULTICAST_HASH 0x5 -#define I40E_AQ_RESOURCE_TYPE_UNICAST_HASH 0x6 -#define I40E_AQ_RESOURCE_TYPE_VLAN 0x7 -#define I40E_AQ_RESOURCE_TYPE_VSI_LIST_ENTRY 0x8 -#define I40E_AQ_RESOURCE_TYPE_ETAG_LIST_ENTRY 0x9 -#define I40E_AQ_RESOURCE_TYPE_VLAN_STAT_POOL 0xA -#define I40E_AQ_RESOURCE_TYPE_MIRROR_RULE 0xB -#define I40E_AQ_RESOURCE_TYPE_QUEUE_SETS 0xC -#define I40E_AQ_RESOURCE_TYPE_VLAN_FILTERS 0xD -#define I40E_AQ_RESOURCE_TYPE_INNER_MAC_FILTERS 0xF -#define I40E_AQ_RESOURCE_TYPE_IP_FILTERS 0x10 -#define I40E_AQ_RESOURCE_TYPE_GRE_VN_KEYS 0x11 -#define I40E_AQ_RESOURCE_TYPE_VN2_KEYS 0x12 -#define I40E_AQ_RESOURCE_TYPE_TUNNEL_PORTS 0x13 - u8 reserved1; - __le16 guaranteed; - __le16 total; - __le16 used; - __le16 total_unalloced; - u8 reserved2[6]; -}; - -I40E_CHECK_STRUCT_LEN(0x10, i40e_aqc_switch_resource_alloc_element_resp); - -/* Set Switch Configuration (direct 0x0205) */ -struct i40e_aqc_set_switch_config { - __le16 flags; -/* flags used for both fields below */ -#define I40E_AQ_SET_SWITCH_CFG_PROMISC 0x0001 -#define I40E_AQ_SET_SWITCH_CFG_L2_FILTER 0x0002 - __le16 valid_flags; - /* The ethertype in switch_tag is dropped on ingress and used - * internally by the switch. Set this to zero for the default - * of 0x88a8 (802.1ad). Should be zero for firmware API - * versions lower than 1.7. - */ - __le16 switch_tag; - /* The ethertypes in first_tag and second_tag are used to - * match the outer and inner VLAN tags (respectively) when HW - * double VLAN tagging is enabled via the set port parameters - * AQ command. Otherwise these are both ignored. Set them to - * zero for their defaults of 0x8100 (802.1Q). Should be zero - * for firmware API versions lower than 1.7. - */ - __le16 first_tag; - __le16 second_tag; - u8 reserved[6]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_set_switch_config); - -/* Read Receive control registers (direct 0x0206) - * Write Receive control registers (direct 0x0207) - * used for accessing Rx control registers that can be - * slow and need special handling when under high Rx load - */ -struct i40e_aqc_rx_ctl_reg_read_write { - __le32 reserved1; - __le32 address; - __le32 reserved2; - __le32 value; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_rx_ctl_reg_read_write); - -/* Add VSI (indirect 0x0210) - * this indirect command uses struct i40e_aqc_vsi_properties_data - * as the indirect buffer (128 bytes) - * - * Update VSI (indirect 0x211) - * uses the same data structure as Add VSI - * - * Get VSI (indirect 0x0212) - * uses the same completion and data structure as Add VSI - */ -struct i40e_aqc_add_get_update_vsi { - __le16 uplink_seid; - u8 connection_type; -#define I40E_AQ_VSI_CONN_TYPE_NORMAL 0x1 -#define I40E_AQ_VSI_CONN_TYPE_DEFAULT 0x2 -#define I40E_AQ_VSI_CONN_TYPE_CASCADED 0x3 - u8 reserved1; - u8 vf_id; - u8 reserved2; - __le16 vsi_flags; -#define I40E_AQ_VSI_TYPE_SHIFT 0x0 -#define I40E_AQ_VSI_TYPE_MASK (0x3 << I40E_AQ_VSI_TYPE_SHIFT) -#define I40E_AQ_VSI_TYPE_VF 0x0 -#define I40E_AQ_VSI_TYPE_VMDQ2 0x1 -#define I40E_AQ_VSI_TYPE_PF 0x2 -#define I40E_AQ_VSI_TYPE_EMP_MNG 0x3 -#define I40E_AQ_VSI_FLAG_CASCADED_PV 0x4 - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_get_update_vsi); - -struct i40e_aqc_add_get_update_vsi_completion { - __le16 seid; - __le16 vsi_number; - __le16 vsi_used; - __le16 vsi_free; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_get_update_vsi_completion); - struct i40e_aqc_vsi_properties_data { /* first 96 byte are written by SW */ __le16 valid_sections; @@ -952,87 +441,6 @@ struct i40e_aqc_vsi_properties_data {

I40E_CHECK_STRUCT_LEN(128, i40e_aqc_vsi_properties_data);

-/* Add Port Virtualizer (direct 0x0220) - * also used for update PV (direct 0x0221) but only flags are used - * (IS_CTRL_PORT only works on add PV) - */ -struct i40e_aqc_add_update_pv { - __le16 command_flags; -#define I40E_AQC_PV_FLAG_PV_TYPE 0x1 -#define I40E_AQC_PV_FLAG_FWD_UNKNOWN_STAG_EN 0x2 -#define I40E_AQC_PV_FLAG_FWD_UNKNOWN_ETAG_EN 0x4 -#define I40E_AQC_PV_FLAG_IS_CTRL_PORT 0x8 - __le16 uplink_seid; - __le16 connected_seid; - u8 reserved[10]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_update_pv); - -struct i40e_aqc_add_update_pv_completion { - /* reserved for update; for add also encodes error if rc == ENOSPC */ - __le16 pv_seid; -#define I40E_AQC_PV_ERR_FLAG_NO_PV 0x1 -#define I40E_AQC_PV_ERR_FLAG_NO_SCHED 0x2 -#define I40E_AQC_PV_ERR_FLAG_NO_COUNTER 0x4 -#define I40E_AQC_PV_ERR_FLAG_NO_ENTRY 0x8 - u8 reserved[14]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_update_pv_completion); - -/* Get PV Params (direct 0x0222) - * uses i40e_aqc_switch_seid for the descriptor - */ - -struct i40e_aqc_get_pv_params_completion { - __le16 seid; - __le16 default_stag; - __le16 pv_flags; /* same flags as add_pv */ -#define I40E_AQC_GET_PV_PV_TYPE 0x1 -#define I40E_AQC_GET_PV_FRWD_UNKNOWN_STAG 0x2 -#define I40E_AQC_GET_PV_FRWD_UNKNOWN_ETAG 0x4 - u8 reserved[8]; - __le16 default_port_seid; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_get_pv_params_completion); - -/* Add VEB (direct 0x0230) */ -struct i40e_aqc_add_veb { - __le16 uplink_seid; - __le16 downlink_seid; - __le16 veb_flags; -#define I40E_AQC_ADD_VEB_FLOATING 0x1 -#define I40E_AQC_ADD_VEB_PORT_TYPE_SHIFT 1 -#define I40E_AQC_ADD_VEB_PORT_TYPE_MASK (0x3 << \ - I40E_AQC_ADD_VEB_PORT_TYPE_SHIFT) -#define I40E_AQC_ADD_VEB_PORT_TYPE_DEFAULT 0x2 -#define I40E_AQC_ADD_VEB_PORT_TYPE_DATA 0x4 -#define I40E_AQC_ADD_VEB_ENABLE_L2_FILTER 0x8 /* deprecated */ -#define I40E_AQC_ADD_VEB_ENABLE_DISABLE_STATS 0x10 - u8 enable_tcs; - u8 reserved[9]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_veb); - -struct i40e_aqc_add_veb_completion { - u8 reserved[6]; - __le16 switch_seid; - /* also encodes error if rc == ENOSPC; codes are the same as add_pv */ - __le16 veb_seid; -#define I40E_AQC_VEB_ERR_FLAG_NO_VEB 0x1 -#define I40E_AQC_VEB_ERR_FLAG_NO_SCHED 0x2 -#define I40E_AQC_VEB_ERR_FLAG_NO_COUNTER 0x4 -#define I40E_AQC_VEB_ERR_FLAG_NO_ENTRY 0x8 - __le16 statistic_index; - __le16 vebs_used; - __le16 vebs_free; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_veb_completion); - /* Get VEB Parameters (direct 0x0232) * uses i40e_aqc_switch_seid for the descriptor */ @@ -1048,1670 +456,73 @@ struct i40e_aqc_get_veb_parameters_completion {

I40E_CHECK_CMD_LENGTH(i40e_aqc_get_veb_parameters_completion);

-/* Delete Element (direct 0x0243) - * uses the generic i40e_aqc_switch_seid - */ - -/* Add MAC-VLAN (indirect 0x0250) */ - -/* used for the command for most vlan commands */ -struct i40e_aqc_macvlan { - __le16 num_addresses; - __le16 seid[3]; -#define I40E_AQC_MACVLAN_CMD_SEID_NUM_SHIFT 0 -#define I40E_AQC_MACVLAN_CMD_SEID_NUM_MASK (0x3FF << \ - I40E_AQC_MACVLAN_CMD_SEID_NUM_SHIFT) -#define I40E_AQC_MACVLAN_CMD_SEID_VALID 0x8000 - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_macvlan); - -/* indirect data for command and response */ -struct i40e_aqc_add_macvlan_element_data { - u8 mac_addr[6]; - __le16 vlan_tag; - __le16 flags; -#define I40E_AQC_MACVLAN_ADD_PERFECT_MATCH 0x0001 -#define I40E_AQC_MACVLAN_ADD_HASH_MATCH 0x0002 -#define I40E_AQC_MACVLAN_ADD_IGNORE_VLAN 0x0004 -#define I40E_AQC_MACVLAN_ADD_TO_QUEUE 0x0008 -#define I40E_AQC_MACVLAN_ADD_USE_SHARED_MAC 0x0010 - __le16 queue_number; -#define I40E_AQC_MACVLAN_CMD_QUEUE_SHIFT 0 -#define I40E_AQC_MACVLAN_CMD_QUEUE_MASK (0x7FF << \ - I40E_AQC_MACVLAN_CMD_SEID_NUM_SHIFT) - /* response section */ - u8 match_method; -#define I40E_AQC_MM_PERFECT_MATCH 0x01 -#define I40E_AQC_MM_HASH_MATCH 0x02 -#define I40E_AQC_MM_ERR_NO_RES 0xFF - u8 reserved1[3]; -}; - -struct i40e_aqc_add_remove_macvlan_completion { - __le16 perfect_mac_used; - __le16 perfect_mac_free; - __le16 unicast_hash_free; - __le16 multicast_hash_free; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_remove_macvlan_completion); - -/* Remove MAC-VLAN (indirect 0x0251) - * uses i40e_aqc_macvlan for the descriptor - * data points to an array of num_addresses of elements - */ +#define I40E_LINK_SPEED_100MB_SHIFT 0x1 +#define I40E_LINK_SPEED_1000MB_SHIFT 0x2 +#define I40E_LINK_SPEED_10GB_SHIFT 0x3 +#define I40E_LINK_SPEED_40GB_SHIFT 0x4 +#define I40E_LINK_SPEED_20GB_SHIFT 0x5 +#define I40E_LINK_SPEED_25GB_SHIFT 0x6

-struct i40e_aqc_remove_macvlan_element_data { - u8 mac_addr[6]; - __le16 vlan_tag; - u8 flags; -#define I40E_AQC_MACVLAN_DEL_PERFECT_MATCH 0x01 -#define I40E_AQC_MACVLAN_DEL_HASH_MATCH 0x02 -#define I40E_AQC_MACVLAN_DEL_IGNORE_VLAN 0x08 -#define I40E_AQC_MACVLAN_DEL_ALL_VSIS 0x10 - u8 reserved[3]; - /* reply section */ - u8 error_code; -#define I40E_AQC_REMOVE_MACVLAN_SUCCESS 0x0 -#define I40E_AQC_REMOVE_MACVLAN_FAIL 0xFF - u8 reply_reserved[3]; +enum i40e_aq_link_speed { + I40E_LINK_SPEED_UNKNOWN = 0, + I40E_LINK_SPEED_100MB = BIT(I40E_LINK_SPEED_100MB_SHIFT), + I40E_LINK_SPEED_1GB = BIT(I40E_LINK_SPEED_1000MB_SHIFT), + I40E_LINK_SPEED_10GB = BIT(I40E_LINK_SPEED_10GB_SHIFT), + I40E_LINK_SPEED_40GB = BIT(I40E_LINK_SPEED_40GB_SHIFT), + I40E_LINK_SPEED_20GB = BIT(I40E_LINK_SPEED_20GB_SHIFT), + I40E_LINK_SPEED_25GB = BIT(I40E_LINK_SPEED_25GB_SHIFT), };

-/* Add VLAN (indirect 0x0252) - * Remove VLAN (indirect 0x0253) - * use the generic i40e_aqc_macvlan for the command +/* Send to PF command (indirect 0x0801) id is only used by PF + * Send to VF command (indirect 0x0802) id is only used by PF + * Send to Peer PF command (indirect 0x0803) */ -struct i40e_aqc_add_remove_vlan_element_data { - __le16 vlan_tag; - u8 vlan_flags; -/* flags for add VLAN */ -#define I40E_AQC_ADD_VLAN_LOCAL 0x1 -#define I40E_AQC_ADD_PVLAN_TYPE_SHIFT 1 -#define I40E_AQC_ADD_PVLAN_TYPE_MASK (0x3 << I40E_AQC_ADD_PVLAN_TYPE_SHIFT) -#define I40E_AQC_ADD_PVLAN_TYPE_REGULAR 0x0 -#define I40E_AQC_ADD_PVLAN_TYPE_PRIMARY 0x2 -#define I40E_AQC_ADD_PVLAN_TYPE_SECONDARY 0x4 -#define I40E_AQC_VLAN_PTYPE_SHIFT 3 -#define I40E_AQC_VLAN_PTYPE_MASK (0x3 << I40E_AQC_VLAN_PTYPE_SHIFT) -#define I40E_AQC_VLAN_PTYPE_REGULAR_VSI 0x0 -#define I40E_AQC_VLAN_PTYPE_PROMISC_VSI 0x8 -#define I40E_AQC_VLAN_PTYPE_COMMUNITY_VSI 0x10 -#define I40E_AQC_VLAN_PTYPE_ISOLATED_VSI 0x18 -/* flags for remove VLAN */ -#define I40E_AQC_REMOVE_VLAN_ALL 0x1 - u8 reserved; - u8 result; -/* flags for add VLAN */ -#define I40E_AQC_ADD_VLAN_SUCCESS 0x0 -#define I40E_AQC_ADD_VLAN_FAIL_REQUEST 0xFE -#define I40E_AQC_ADD_VLAN_FAIL_RESOURCE 0xFF -/* flags for remove VLAN */ -#define I40E_AQC_REMOVE_VLAN_SUCCESS 0x0 -#define I40E_AQC_REMOVE_VLAN_FAIL 0xFF - u8 reserved1[3]; -}; - -struct i40e_aqc_add_remove_vlan_completion { +struct i40e_aqc_pf_vf_message { + __le32 id; u8 reserved[4]; - __le16 vlans_used; - __le16 vlans_free; __le32 addr_high; __le32 addr_low; };

-/* Set VSI Promiscuous Modes (direct 0x0254) */ -struct i40e_aqc_set_vsi_promiscuous_modes { - __le16 promiscuous_flags; - __le16 valid_flags; -/* flags used for both fields above */ -#define I40E_AQC_SET_VSI_PROMISC_UNICAST 0x01 -#define I40E_AQC_SET_VSI_PROMISC_MULTICAST 0x02 -#define I40E_AQC_SET_VSI_PROMISC_BROADCAST 0x04 -#define I40E_AQC_SET_VSI_DEFAULT 0x08 -#define I40E_AQC_SET_VSI_PROMISC_VLAN 0x10 -#define I40E_AQC_SET_VSI_PROMISC_TX 0x8000 - __le16 seid; -#define I40E_AQC_VSI_PROM_CMD_SEID_MASK 0x3FF - __le16 vlan_tag; -#define I40E_AQC_SET_VSI_VLAN_MASK 0x0FFF -#define I40E_AQC_SET_VSI_VLAN_VALID 0x8000 - u8 reserved[8]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_set_vsi_promiscuous_modes); - -/* Add S/E-tag command (direct 0x0255) - * Uses generic i40e_aqc_add_remove_tag_completion for completion - */ -struct i40e_aqc_add_tag { - __le16 flags; -#define I40E_AQC_ADD_TAG_FLAG_TO_QUEUE 0x0001 - __le16 seid; -#define I40E_AQC_ADD_TAG_CMD_SEID_NUM_SHIFT 0 -#define I40E_AQC_ADD_TAG_CMD_SEID_NUM_MASK (0x3FF << \ - I40E_AQC_ADD_TAG_CMD_SEID_NUM_SHIFT) - __le16 tag; - __le16 queue_number; - u8 reserved[8]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_tag); - -struct i40e_aqc_add_remove_tag_completion { - u8 reserved[12]; - __le16 tags_used; - __le16 tags_free; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_remove_tag_completion); - -/* Remove S/E-tag command (direct 0x0256) - * Uses generic i40e_aqc_add_remove_tag_completion for completion - */ -struct i40e_aqc_remove_tag { - __le16 seid; -#define I40E_AQC_REMOVE_TAG_CMD_SEID_NUM_SHIFT 0 -#define I40E_AQC_REMOVE_TAG_CMD_SEID_NUM_MASK (0x3FF << \ - I40E_AQC_REMOVE_TAG_CMD_SEID_NUM_SHIFT) - __le16 tag; - u8 reserved[12]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_remove_tag); - -/* Add multicast E-Tag (direct 0x0257) - * del multicast E-Tag (direct 0x0258) only uses pv_seid and etag fields - * and no external data - */ -struct i40e_aqc_add_remove_mcast_etag { - __le16 pv_seid; - __le16 etag; - u8 num_unicast_etags; - u8 reserved[3]; - __le32 addr_high; /* address of array of 2-byte s-tags */ - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_remove_mcast_etag); +I40E_CHECK_CMD_LENGTH(i40e_aqc_pf_vf_message);

-struct i40e_aqc_add_remove_mcast_etag_completion { - u8 reserved[4]; - __le16 mcast_etags_used; - __le16 mcast_etags_free; +struct i40e_aqc_get_set_rss_key { +#define I40E_AQC_SET_RSS_KEY_VSI_VALID BIT(15) +#define I40E_AQC_SET_RSS_KEY_VSI_ID_SHIFT 0 +#define I40E_AQC_SET_RSS_KEY_VSI_ID_MASK (0x3FF << \ + I40E_AQC_SET_RSS_KEY_VSI_ID_SHIFT) + __le16 vsi_id; + u8 reserved[6]; __le32 addr_high; __le32 addr_low; - };

-I40E_CHECK_CMD_LENGTH(i40e_aqc_add_remove_mcast_etag_completion); +I40E_CHECK_CMD_LENGTH(i40e_aqc_get_set_rss_key);

-/* Update S/E-Tag (direct 0x0259) */ -struct i40e_aqc_update_tag { - __le16 seid; -#define I40E_AQC_UPDATE_TAG_CMD_SEID_NUM_SHIFT 0 -#define I40E_AQC_UPDATE_TAG_CMD_SEID_NUM_MASK (0x3FF << \ - I40E_AQC_UPDATE_TAG_CMD_SEID_NUM_SHIFT) - __le16 old_tag; - __le16 new_tag; - u8 reserved[10]; +struct i40e_aqc_get_set_rss_key_data { + u8 standard_rss_key[0x28]; + u8 extended_hash_key[0xc]; };

-I40E_CHECK_CMD_LENGTH(i40e_aqc_update_tag); - -struct i40e_aqc_update_tag_completion { - u8 reserved[12]; - __le16 tags_used; - __le16 tags_free; -}; +I40E_CHECK_STRUCT_LEN(0x34, i40e_aqc_get_set_rss_key_data);

-I40E_CHECK_CMD_LENGTH(i40e_aqc_update_tag_completion); +struct i40e_aqc_get_set_rss_lut { +#define I40E_AQC_SET_RSS_LUT_VSI_VALID BIT(15) +#define I40E_AQC_SET_RSS_LUT_VSI_ID_SHIFT 0 +#define I40E_AQC_SET_RSS_LUT_VSI_ID_MASK (0x3FF << \ + I40E_AQC_SET_RSS_LUT_VSI_ID_SHIFT) + __le16 vsi_id; +#define I40E_AQC_SET_RSS_LUT_TABLE_TYPE_SHIFT 0 +#define I40E_AQC_SET_RSS_LUT_TABLE_TYPE_MASK \ + BIT(I40E_AQC_SET_RSS_LUT_TABLE_TYPE_SHIFT)

-/* Add Control Packet filter (direct 0x025A) - * Remove Control Packet filter (direct 0x025B) - * uses the i40e_aqc_add_oveb_cloud, - * and the generic direct completion structure - */ -struct i40e_aqc_add_remove_control_packet_filter { - u8 mac[6]; - __le16 etype; +#define I40E_AQC_SET_RSS_LUT_TABLE_TYPE_VSI 0 +#define I40E_AQC_SET_RSS_LUT_TABLE_TYPE_PF 1 __le16 flags; -#define I40E_AQC_ADD_CONTROL_PACKET_FLAGS_IGNORE_MAC 0x0001 -#define I40E_AQC_ADD_CONTROL_PACKET_FLAGS_DROP 0x0002 -#define I40E_AQC_ADD_CONTROL_PACKET_FLAGS_TO_QUEUE 0x0004 -#define I40E_AQC_ADD_CONTROL_PACKET_FLAGS_TX 0x0008 -#define I40E_AQC_ADD_CONTROL_PACKET_FLAGS_RX 0x0000 - __le16 seid; -#define I40E_AQC_ADD_CONTROL_PACKET_CMD_SEID_NUM_SHIFT 0 -#define I40E_AQC_ADD_CONTROL_PACKET_CMD_SEID_NUM_MASK (0x3FF << \ - I40E_AQC_ADD_CONTROL_PACKET_CMD_SEID_NUM_SHIFT) - __le16 queue; - u8 reserved[2]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_remove_control_packet_filter); - -struct i40e_aqc_add_remove_control_packet_filter_completion { - __le16 mac_etype_used; - __le16 etype_used; - __le16 mac_etype_free; - __le16 etype_free; - u8 reserved[8]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_remove_control_packet_filter_completion); - -/* Add Cloud filters (indirect 0x025C) - * Remove Cloud filters (indirect 0x025D) - * uses the i40e_aqc_add_remove_cloud_filters, - * and the generic indirect completion structure - */ -struct i40e_aqc_add_remove_cloud_filters { - u8 num_filters; - u8 reserved; - __le16 seid; -#define I40E_AQC_ADD_CLOUD_CMD_SEID_NUM_SHIFT 0 -#define I40E_AQC_ADD_CLOUD_CMD_SEID_NUM_MASK (0x3FF << \ - I40E_AQC_ADD_CLOUD_CMD_SEID_NUM_SHIFT) - u8 big_buffer_flag; -#define I40E_AQC_ADD_CLOUD_CMD_BB 1 - u8 reserved2[3]; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_remove_cloud_filters); - -struct i40e_aqc_cloud_filters_element_data { - u8 outer_mac[6]; - u8 inner_mac[6]; - __le16 inner_vlan; - union { - struct { - u8 reserved[12]; - u8 data[4]; - } v4; - struct { - u8 data[16]; - } v6; - struct { - __le16 data[8]; - } raw_v6; - } ipaddr; - __le16 flags; -#define I40E_AQC_ADD_CLOUD_FILTER_SHIFT 0 -#define I40E_AQC_ADD_CLOUD_FILTER_MASK (0x3F << \ - I40E_AQC_ADD_CLOUD_FILTER_SHIFT) -/* 0x0000 reserved */ -#define I40E_AQC_ADD_CLOUD_FILTER_OIP 0x0001 -/* 0x0002 reserved */ -#define I40E_AQC_ADD_CLOUD_FILTER_IMAC_IVLAN 0x0003 -#define I40E_AQC_ADD_CLOUD_FILTER_IMAC_IVLAN_TEN_ID 0x0004 -/* 0x0005 reserved */ -#define I40E_AQC_ADD_CLOUD_FILTER_IMAC_TEN_ID 0x0006 -/* 0x0007 reserved */ -/* 0x0008 reserved */ -#define I40E_AQC_ADD_CLOUD_FILTER_OMAC 0x0009 -#define I40E_AQC_ADD_CLOUD_FILTER_IMAC 0x000A -#define I40E_AQC_ADD_CLOUD_FILTER_OMAC_TEN_ID_IMAC 0x000B -#define I40E_AQC_ADD_CLOUD_FILTER_IIP 0x000C -/* 0x0010 to 0x0017 is for custom filters */ -#define I40E_AQC_ADD_CLOUD_FILTER_IP_PORT 0x0010 /* Dest IP + L4 Port */ -#define I40E_AQC_ADD_CLOUD_FILTER_MAC_PORT 0x0011 /* Dest MAC + L4 Port */ -#define I40E_AQC_ADD_CLOUD_FILTER_MAC_VLAN_PORT 0x0012 /* Dest MAC + VLAN + L4 Port */ - -#define I40E_AQC_ADD_CLOUD_FLAGS_TO_QUEUE 0x0080 -#define I40E_AQC_ADD_CLOUD_VNK_SHIFT 6 -#define I40E_AQC_ADD_CLOUD_VNK_MASK 0x00C0 -#define I40E_AQC_ADD_CLOUD_FLAGS_IPV4 0 -#define I40E_AQC_ADD_CLOUD_FLAGS_IPV6 0x0100 - -#define I40E_AQC_ADD_CLOUD_TNL_TYPE_SHIFT 9 -#define I40E_AQC_ADD_CLOUD_TNL_TYPE_MASK 0x1E00 -#define I40E_AQC_ADD_CLOUD_TNL_TYPE_VXLAN 0 -#define I40E_AQC_ADD_CLOUD_TNL_TYPE_NVGRE_OMAC 1 -#define I40E_AQC_ADD_CLOUD_TNL_TYPE_GENEVE 2 -#define I40E_AQC_ADD_CLOUD_TNL_TYPE_IP 3 -#define I40E_AQC_ADD_CLOUD_TNL_TYPE_RESERVED 4 -#define I40E_AQC_ADD_CLOUD_TNL_TYPE_VXLAN_GPE 5 - -#define I40E_AQC_ADD_CLOUD_FLAGS_SHARED_OUTER_MAC 0x2000 -#define I40E_AQC_ADD_CLOUD_FLAGS_SHARED_INNER_MAC 0x4000 -#define I40E_AQC_ADD_CLOUD_FLAGS_SHARED_OUTER_IP 0x8000 - - __le32 tenant_id; - u8 reserved[4]; - __le16 queue_number; -#define I40E_AQC_ADD_CLOUD_QUEUE_SHIFT 0 -#define I40E_AQC_ADD_CLOUD_QUEUE_MASK (0x7FF << \ - I40E_AQC_ADD_CLOUD_QUEUE_SHIFT) - u8 reserved2[14]; - /* response section */ - u8 allocation_result; -#define I40E_AQC_ADD_CLOUD_FILTER_SUCCESS 0x0 -#define I40E_AQC_ADD_CLOUD_FILTER_FAIL 0xFF - u8 response_reserved[7]; -}; - -I40E_CHECK_STRUCT_LEN(0x40, i40e_aqc_cloud_filters_element_data); - -/* i40e_aqc_cloud_filters_element_bb is used when - * I40E_AQC_ADD_CLOUD_CMD_BB flag is set. - */ -struct i40e_aqc_cloud_filters_element_bb { - struct i40e_aqc_cloud_filters_element_data element; - u16 general_fields[32]; -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X10_WORD0 0 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X10_WORD1 1 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X10_WORD2 2 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X11_WORD0 3 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X11_WORD1 4 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X11_WORD2 5 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X12_WORD0 6 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X12_WORD1 7 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X12_WORD2 8 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X13_WORD0 9 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X13_WORD1 10 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X13_WORD2 11 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X14_WORD0 12 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X14_WORD1 13 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X14_WORD2 14 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X16_WORD0 15 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X16_WORD1 16 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X16_WORD2 17 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X16_WORD3 18 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X16_WORD4 19 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X16_WORD5 20 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X16_WORD6 21 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X16_WORD7 22 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X17_WORD0 23 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X17_WORD1 24 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X17_WORD2 25 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X17_WORD3 26 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X17_WORD4 27 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X17_WORD5 28 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X17_WORD6 29 -#define I40E_AQC_ADD_CLOUD_FV_FLU_0X17_WORD7 30 -}; - -I40E_CHECK_STRUCT_LEN(0x80, i40e_aqc_cloud_filters_element_bb); - -struct i40e_aqc_remove_cloud_filters_completion { - __le16 perfect_ovlan_used; - __le16 perfect_ovlan_free; - __le16 vlan_used; - __le16 vlan_free; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_remove_cloud_filters_completion); - -/* Replace filter Command 0x025F - * uses the i40e_aqc_replace_cloud_filters, - * and the generic indirect completion structure - */ -struct i40e_filter_data { - u8 filter_type; - u8 input[3]; -}; - -I40E_CHECK_STRUCT_LEN(4, i40e_filter_data); - -struct i40e_aqc_replace_cloud_filters_cmd { - u8 valid_flags; -#define I40E_AQC_REPLACE_L1_FILTER 0x0 -#define I40E_AQC_REPLACE_CLOUD_FILTER 0x1 -#define I40E_AQC_GET_CLOUD_FILTERS 0x2 -#define I40E_AQC_MIRROR_CLOUD_FILTER 0x4 -#define I40E_AQC_HIGH_PRIORITY_CLOUD_FILTER 0x8 - u8 old_filter_type; - u8 new_filter_type; - u8 tr_bit; - u8 reserved[4]; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_replace_cloud_filters_cmd); - -struct i40e_aqc_replace_cloud_filters_cmd_buf { - u8 data[32]; -/* Filter type INPUT codes*/ -#define I40E_AQC_REPLACE_CLOUD_CMD_INPUT_ENTRIES_MAX 3 -#define I40E_AQC_REPLACE_CLOUD_CMD_INPUT_VALIDATED BIT(7) - -/* Field Vector offsets */ -#define I40E_AQC_REPLACE_CLOUD_CMD_INPUT_FV_MAC_DA 0 -#define I40E_AQC_REPLACE_CLOUD_CMD_INPUT_FV_STAG_ETH 6 -#define I40E_AQC_REPLACE_CLOUD_CMD_INPUT_FV_STAG 7 -#define I40E_AQC_REPLACE_CLOUD_CMD_INPUT_FV_VLAN 8 -#define I40E_AQC_REPLACE_CLOUD_CMD_INPUT_FV_STAG_OVLAN 9 -#define I40E_AQC_REPLACE_CLOUD_CMD_INPUT_FV_STAG_IVLAN 10 -#define I40E_AQC_REPLACE_CLOUD_CMD_INPUT_FV_TUNNLE_KEY 11 -#define I40E_AQC_REPLACE_CLOUD_CMD_INPUT_FV_IMAC 12 -/* big FLU */ -#define I40E_AQC_REPLACE_CLOUD_CMD_INPUT_FV_IP_DA 14 -/* big FLU */ -#define I40E_AQC_REPLACE_CLOUD_CMD_INPUT_FV_OIP_DA 15 - -#define I40E_AQC_REPLACE_CLOUD_CMD_INPUT_FV_INNER_VLAN 37 - struct i40e_filter_data filters[8]; -}; - -I40E_CHECK_STRUCT_LEN(0x40, i40e_aqc_replace_cloud_filters_cmd_buf); - -/* Add Mirror Rule (indirect or direct 0x0260) - * Delete Mirror Rule (indirect or direct 0x0261) - * note: some rule types (4,5) do not use an external buffer. - * take care to set the flags correctly. - */ -struct i40e_aqc_add_delete_mirror_rule { - __le16 seid; - __le16 rule_type; -#define I40E_AQC_MIRROR_RULE_TYPE_SHIFT 0 -#define I40E_AQC_MIRROR_RULE_TYPE_MASK (0x7 << \ - I40E_AQC_MIRROR_RULE_TYPE_SHIFT) -#define I40E_AQC_MIRROR_RULE_TYPE_VPORT_INGRESS 1 -#define I40E_AQC_MIRROR_RULE_TYPE_VPORT_EGRESS 2 -#define I40E_AQC_MIRROR_RULE_TYPE_VLAN 3 -#define I40E_AQC_MIRROR_RULE_TYPE_ALL_INGRESS 4 -#define I40E_AQC_MIRROR_RULE_TYPE_ALL_EGRESS 5 - __le16 num_entries; - __le16 destination; /* VSI for add, rule id for delete */ - __le32 addr_high; /* address of array of 2-byte VSI or VLAN ids */ - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_delete_mirror_rule); - -struct i40e_aqc_add_delete_mirror_rule_completion { - u8 reserved[2]; - __le16 rule_id; /* only used on add */ - __le16 mirror_rules_used; - __le16 mirror_rules_free; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_delete_mirror_rule_completion); - -/* Dynamic Device Personalization */ -struct i40e_aqc_write_personalization_profile { - u8 flags; - u8 reserved[3]; - __le32 profile_track_id; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_write_personalization_profile); - -struct i40e_aqc_write_ddp_resp { - __le32 error_offset; - __le32 error_info; - __le32 addr_high; - __le32 addr_low; -}; - -struct i40e_aqc_get_applied_profiles { - u8 flags; -#define I40E_AQC_GET_DDP_GET_CONF 0x1 -#define I40E_AQC_GET_DDP_GET_RDPU_CONF 0x2 - u8 rsv[3]; - __le32 reserved; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_get_applied_profiles); - -/* DCB 0x03xx*/ - -/* PFC Ignore (direct 0x0301) - * the command and response use the same descriptor structure - */ -struct i40e_aqc_pfc_ignore { - u8 tc_bitmap; - u8 command_flags; /* unused on response */ -#define I40E_AQC_PFC_IGNORE_SET 0x80 -#define I40E_AQC_PFC_IGNORE_CLEAR 0x0 - u8 reserved[14]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_pfc_ignore); - -/* DCB Update (direct 0x0302) uses the i40e_aq_desc structure - * with no parameters - */ - -/* TX scheduler 0x04xx */ - -/* Almost all the indirect commands use - * this generic struct to pass the SEID in param0 - */ -struct i40e_aqc_tx_sched_ind { - __le16 vsi_seid; - u8 reserved[6]; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_tx_sched_ind); - -/* Several commands respond with a set of queue set handles */ -struct i40e_aqc_qs_handles_resp { - __le16 qs_handles[8]; -}; - -/* Configure VSI BW limits (direct 0x0400) */ -struct i40e_aqc_configure_vsi_bw_limit { - __le16 vsi_seid; - u8 reserved[2]; - __le16 credit; - u8 reserved1[2]; - u8 max_credit; /* 0-3, limit = 2^max */ - u8 reserved2[7]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_configure_vsi_bw_limit); - -/* Configure VSI Bandwidth Limit per Traffic Type (indirect 0x0406) - * responds with i40e_aqc_qs_handles_resp - */ -struct i40e_aqc_configure_vsi_ets_sla_bw_data { - u8 tc_valid_bits; - u8 reserved[15]; - __le16 tc_bw_credits[8]; /* FW writesback QS handles here */ - - /* 4 bits per tc 0-7, 4th bit is reserved, limit = 2^max */ - __le16 tc_bw_max[2]; - u8 reserved1[28]; -}; - -I40E_CHECK_STRUCT_LEN(0x40, i40e_aqc_configure_vsi_ets_sla_bw_data); - -/* Configure VSI Bandwidth Allocation per Traffic Type (indirect 0x0407) - * responds with i40e_aqc_qs_handles_resp - */ -struct i40e_aqc_configure_vsi_tc_bw_data { - u8 tc_valid_bits; - u8 reserved[3]; - u8 tc_bw_credits[8]; - u8 reserved1[4]; - __le16 qs_handles[8]; -}; - -I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_configure_vsi_tc_bw_data); - -/* Query vsi bw configuration (indirect 0x0408) */ -struct i40e_aqc_query_vsi_bw_config_resp { - u8 tc_valid_bits; - u8 tc_suspended_bits; - u8 reserved[14]; - __le16 qs_handles[8]; - u8 reserved1[4]; - __le16 port_bw_limit; - u8 reserved2[2]; - u8 max_bw; /* 0-3, limit = 2^max */ - u8 reserved3[23]; -}; - -I40E_CHECK_STRUCT_LEN(0x40, i40e_aqc_query_vsi_bw_config_resp); - -/* Query VSI Bandwidth Allocation per Traffic Type (indirect 0x040A) */ -struct i40e_aqc_query_vsi_ets_sla_config_resp { - u8 tc_valid_bits; - u8 reserved[3]; - u8 share_credits[8]; - __le16 credits[8]; - - /* 4 bits per tc 0-7, 4th bit is reserved, limit = 2^max */ - __le16 tc_bw_max[2]; -}; - -I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_query_vsi_ets_sla_config_resp); - -/* Configure Switching Component Bandwidth Limit (direct 0x0410) */ -struct i40e_aqc_configure_switching_comp_bw_limit { - __le16 seid; - u8 reserved[2]; - __le16 credit; - u8 reserved1[2]; - u8 max_bw; /* 0-3, limit = 2^max */ - u8 reserved2[7]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_configure_switching_comp_bw_limit); - -/* Enable Physical Port ETS (indirect 0x0413) - * Modify Physical Port ETS (indirect 0x0414) - * Disable Physical Port ETS (indirect 0x0415) - */ -struct i40e_aqc_configure_switching_comp_ets_data { - u8 reserved[4]; - u8 tc_valid_bits; - u8 seepage; -#define I40E_AQ_ETS_SEEPAGE_EN_MASK 0x1 - u8 tc_strict_priority_flags; - u8 reserved1[17]; - u8 tc_bw_share_credits[8]; - u8 reserved2[96]; -}; - -I40E_CHECK_STRUCT_LEN(0x80, i40e_aqc_configure_switching_comp_ets_data); - -/* Configure Switching Component Bandwidth Limits per Tc (indirect 0x0416) */ -struct i40e_aqc_configure_switching_comp_ets_bw_limit_data { - u8 tc_valid_bits; - u8 reserved[15]; - __le16 tc_bw_credit[8]; - - /* 4 bits per tc 0-7, 4th bit is reserved, limit = 2^max */ - __le16 tc_bw_max[2]; - u8 reserved1[28]; -}; - -I40E_CHECK_STRUCT_LEN(0x40, - i40e_aqc_configure_switching_comp_ets_bw_limit_data); - -/* Configure Switching Component Bandwidth Allocation per Tc - * (indirect 0x0417) - */ -struct i40e_aqc_configure_switching_comp_bw_config_data { - u8 tc_valid_bits; - u8 reserved[2]; - u8 absolute_credits; /* bool */ - u8 tc_bw_share_credits[8]; - u8 reserved1[20]; -}; - -I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_configure_switching_comp_bw_config_data); - -/* Query Switching Component Configuration (indirect 0x0418) */ -struct i40e_aqc_query_switching_comp_ets_config_resp { - u8 tc_valid_bits; - u8 reserved[35]; - __le16 port_bw_limit; - u8 reserved1[2]; - u8 tc_bw_max; /* 0-3, limit = 2^max */ - u8 reserved2[23]; -}; - -I40E_CHECK_STRUCT_LEN(0x40, i40e_aqc_query_switching_comp_ets_config_resp); - -/* Query PhysicalPort ETS Configuration (indirect 0x0419) */ -struct i40e_aqc_query_port_ets_config_resp { - u8 reserved[4]; - u8 tc_valid_bits; - u8 reserved1; - u8 tc_strict_priority_bits; - u8 reserved2; - u8 tc_bw_share_credits[8]; - __le16 tc_bw_limits[8]; - - /* 4 bits per tc 0-7, 4th bit reserved, limit = 2^max */ - __le16 tc_bw_max[2]; - u8 reserved3[32]; -}; - -I40E_CHECK_STRUCT_LEN(0x44, i40e_aqc_query_port_ets_config_resp); - -/* Query Switching Component Bandwidth Allocation per Traffic Type - * (indirect 0x041A) - */ -struct i40e_aqc_query_switching_comp_bw_config_resp { - u8 tc_valid_bits; - u8 reserved[2]; - u8 absolute_credits_enable; /* bool */ - u8 tc_bw_share_credits[8]; - __le16 tc_bw_limits[8]; - - /* 4 bits per tc 0-7, 4th bit is reserved, limit = 2^max */ - __le16 tc_bw_max[2]; -}; - -I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_query_switching_comp_bw_config_resp); - -/* Suspend/resume port TX traffic - * (direct 0x041B and 0x041C) uses the generic SEID struct - */ - -/* Configure partition BW - * (indirect 0x041D) - */ -struct i40e_aqc_configure_partition_bw_data { - __le16 pf_valid_bits; - u8 min_bw[16]; /* guaranteed bandwidth */ - u8 max_bw[16]; /* bandwidth limit */ -}; - -I40E_CHECK_STRUCT_LEN(0x22, i40e_aqc_configure_partition_bw_data); - -/* Get and set the active HMC resource profile and status. - * (direct 0x0500) and (direct 0x0501) - */ -struct i40e_aq_get_set_hmc_resource_profile { - u8 pm_profile; - u8 pe_vf_enabled; - u8 reserved[14]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aq_get_set_hmc_resource_profile); - -enum i40e_aq_hmc_profile { - /* I40E_HMC_PROFILE_NO_CHANGE = 0, reserved */ - I40E_HMC_PROFILE_DEFAULT = 1, - I40E_HMC_PROFILE_FAVOR_VF = 2, - I40E_HMC_PROFILE_EQUAL = 3, -}; - -/* Get PHY Abilities (indirect 0x0600) uses the generic indirect struct */ - -/* set in param0 for get phy abilities to report qualified modules */ -#define I40E_AQ_PHY_REPORT_QUALIFIED_MODULES 0x0001 -#define I40E_AQ_PHY_REPORT_INITIAL_VALUES 0x0002 - -enum i40e_aq_phy_type { - I40E_PHY_TYPE_SGMII = 0x0, - I40E_PHY_TYPE_1000BASE_KX = 0x1, - I40E_PHY_TYPE_10GBASE_KX4 = 0x2, - I40E_PHY_TYPE_10GBASE_KR = 0x3, - I40E_PHY_TYPE_40GBASE_KR4 = 0x4, - I40E_PHY_TYPE_XAUI = 0x5, - I40E_PHY_TYPE_XFI = 0x6, - I40E_PHY_TYPE_SFI = 0x7, - I40E_PHY_TYPE_XLAUI = 0x8, - I40E_PHY_TYPE_XLPPI = 0x9, - I40E_PHY_TYPE_40GBASE_CR4_CU = 0xA, - I40E_PHY_TYPE_10GBASE_CR1_CU = 0xB, - I40E_PHY_TYPE_10GBASE_AOC = 0xC, - I40E_PHY_TYPE_40GBASE_AOC = 0xD, - I40E_PHY_TYPE_UNRECOGNIZED = 0xE, - I40E_PHY_TYPE_UNSUPPORTED = 0xF, - I40E_PHY_TYPE_100BASE_TX = 0x11, - I40E_PHY_TYPE_1000BASE_T = 0x12, - I40E_PHY_TYPE_10GBASE_T = 0x13, - I40E_PHY_TYPE_10GBASE_SR = 0x14, - I40E_PHY_TYPE_10GBASE_LR = 0x15, - I40E_PHY_TYPE_10GBASE_SFPP_CU = 0x16, - I40E_PHY_TYPE_10GBASE_CR1 = 0x17, - I40E_PHY_TYPE_40GBASE_CR4 = 0x18, - I40E_PHY_TYPE_40GBASE_SR4 = 0x19, - I40E_PHY_TYPE_40GBASE_LR4 = 0x1A, - I40E_PHY_TYPE_1000BASE_SX = 0x1B, - I40E_PHY_TYPE_1000BASE_LX = 0x1C, - I40E_PHY_TYPE_1000BASE_T_OPTICAL = 0x1D, - I40E_PHY_TYPE_20GBASE_KR2 = 0x1E, - I40E_PHY_TYPE_25GBASE_KR = 0x1F, - I40E_PHY_TYPE_25GBASE_CR = 0x20, - I40E_PHY_TYPE_25GBASE_SR = 0x21, - I40E_PHY_TYPE_25GBASE_LR = 0x22, - I40E_PHY_TYPE_25GBASE_AOC = 0x23, - I40E_PHY_TYPE_25GBASE_ACC = 0x24, - I40E_PHY_TYPE_MAX, - I40E_PHY_TYPE_NOT_SUPPORTED_HIGH_TEMP = 0xFD, - I40E_PHY_TYPE_EMPTY = 0xFE, - I40E_PHY_TYPE_DEFAULT = 0xFF, -}; - -#define I40E_LINK_SPEED_100MB_SHIFT 0x1 -#define I40E_LINK_SPEED_1000MB_SHIFT 0x2 -#define I40E_LINK_SPEED_10GB_SHIFT 0x3 -#define I40E_LINK_SPEED_40GB_SHIFT 0x4 -#define I40E_LINK_SPEED_20GB_SHIFT 0x5 -#define I40E_LINK_SPEED_25GB_SHIFT 0x6 - -enum i40e_aq_link_speed { - I40E_LINK_SPEED_UNKNOWN = 0, - I40E_LINK_SPEED_100MB = BIT(I40E_LINK_SPEED_100MB_SHIFT), - I40E_LINK_SPEED_1GB = BIT(I40E_LINK_SPEED_1000MB_SHIFT), - I40E_LINK_SPEED_10GB = BIT(I40E_LINK_SPEED_10GB_SHIFT), - I40E_LINK_SPEED_40GB = BIT(I40E_LINK_SPEED_40GB_SHIFT), - I40E_LINK_SPEED_20GB = BIT(I40E_LINK_SPEED_20GB_SHIFT), - I40E_LINK_SPEED_25GB = BIT(I40E_LINK_SPEED_25GB_SHIFT), -}; - -struct i40e_aqc_module_desc { - u8 oui[3]; - u8 reserved1; - u8 part_number[16]; - u8 revision[4]; - u8 reserved2[8]; -}; - -I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_module_desc); - -struct i40e_aq_get_phy_abilities_resp { - __le32 phy_type; /* bitmap using the above enum for offsets */ - u8 link_speed; /* bitmap using the above enum bit patterns */ - u8 abilities; -#define I40E_AQ_PHY_FLAG_PAUSE_TX 0x01 -#define I40E_AQ_PHY_FLAG_PAUSE_RX 0x02 -#define I40E_AQ_PHY_FLAG_LOW_POWER 0x04 -#define I40E_AQ_PHY_LINK_ENABLED 0x08 -#define I40E_AQ_PHY_AN_ENABLED 0x10 -#define I40E_AQ_PHY_FLAG_MODULE_QUAL 0x20 -#define I40E_AQ_PHY_FEC_ABILITY_KR 0x40 -#define I40E_AQ_PHY_FEC_ABILITY_RS 0x80 - __le16 eee_capability; -#define I40E_AQ_EEE_100BASE_TX 0x0002 -#define I40E_AQ_EEE_1000BASE_T 0x0004 -#define I40E_AQ_EEE_10GBASE_T 0x0008 -#define I40E_AQ_EEE_1000BASE_KX 0x0010 -#define I40E_AQ_EEE_10GBASE_KX4 0x0020 -#define I40E_AQ_EEE_10GBASE_KR 0x0040 - __le32 eeer_val; - u8 d3_lpan; -#define I40E_AQ_SET_PHY_D3_LPAN_ENA 0x01 - u8 phy_type_ext; -#define I40E_AQ_PHY_TYPE_EXT_25G_KR 0X01 -#define I40E_AQ_PHY_TYPE_EXT_25G_CR 0X02 -#define I40E_AQ_PHY_TYPE_EXT_25G_SR 0x04 -#define I40E_AQ_PHY_TYPE_EXT_25G_LR 0x08 -#define I40E_AQ_PHY_TYPE_EXT_25G_AOC 0x10 -#define I40E_AQ_PHY_TYPE_EXT_25G_ACC 0x20 - u8 fec_cfg_curr_mod_ext_info; -#define I40E_AQ_ENABLE_FEC_KR 0x01 -#define I40E_AQ_ENABLE_FEC_RS 0x02 -#define I40E_AQ_REQUEST_FEC_KR 0x04 -#define I40E_AQ_REQUEST_FEC_RS 0x08 -#define I40E_AQ_ENABLE_FEC_AUTO 0x10 -#define I40E_AQ_FEC -#define I40E_AQ_MODULE_TYPE_EXT_MASK 0xE0 -#define I40E_AQ_MODULE_TYPE_EXT_SHIFT 5 - - u8 ext_comp_code; - u8 phy_id[4]; - u8 module_type[3]; - u8 qualified_module_count; -#define I40E_AQ_PHY_MAX_QMS 16 - struct i40e_aqc_module_desc qualified_module[I40E_AQ_PHY_MAX_QMS]; -}; - -I40E_CHECK_STRUCT_LEN(0x218, i40e_aq_get_phy_abilities_resp); - -/* Set PHY Config (direct 0x0601) */ -struct i40e_aq_set_phy_config { /* same bits as above in all */ - __le32 phy_type; - u8 link_speed; - u8 abilities; -/* bits 0-2 use the values from get_phy_abilities_resp */ -#define I40E_AQ_PHY_ENABLE_LINK 0x08 -#define I40E_AQ_PHY_ENABLE_AN 0x10 -#define I40E_AQ_PHY_ENABLE_ATOMIC_LINK 0x20 - __le16 eee_capability; - __le32 eeer; - u8 low_power_ctrl; - u8 phy_type_ext; -#define I40E_AQ_PHY_TYPE_EXT_25G_KR 0X01 -#define I40E_AQ_PHY_TYPE_EXT_25G_CR 0X02 -#define I40E_AQ_PHY_TYPE_EXT_25G_SR 0x04 -#define I40E_AQ_PHY_TYPE_EXT_25G_LR 0x08 - u8 fec_config; -#define I40E_AQ_SET_FEC_ABILITY_KR BIT(0) -#define I40E_AQ_SET_FEC_ABILITY_RS BIT(1) -#define I40E_AQ_SET_FEC_REQUEST_KR BIT(2) -#define I40E_AQ_SET_FEC_REQUEST_RS BIT(3) -#define I40E_AQ_SET_FEC_AUTO BIT(4) -#define I40E_AQ_PHY_FEC_CONFIG_SHIFT 0x0 -#define I40E_AQ_PHY_FEC_CONFIG_MASK (0x1F << I40E_AQ_PHY_FEC_CONFIG_SHIFT) - u8 reserved; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aq_set_phy_config); - -/* Set MAC Config command data structure (direct 0x0603) */ -struct i40e_aq_set_mac_config { - __le16 max_frame_size; - u8 params; -#define I40E_AQ_SET_MAC_CONFIG_CRC_EN 0x04 -#define I40E_AQ_SET_MAC_CONFIG_PACING_MASK 0x78 -#define I40E_AQ_SET_MAC_CONFIG_PACING_SHIFT 3 -#define I40E_AQ_SET_MAC_CONFIG_PACING_NONE 0x0 -#define I40E_AQ_SET_MAC_CONFIG_PACING_1B_13TX 0xF -#define I40E_AQ_SET_MAC_CONFIG_PACING_1DW_9TX 0x9 -#define I40E_AQ_SET_MAC_CONFIG_PACING_1DW_4TX 0x8 -#define I40E_AQ_SET_MAC_CONFIG_PACING_3DW_7TX 0x7 -#define I40E_AQ_SET_MAC_CONFIG_PACING_2DW_3TX 0x6 -#define I40E_AQ_SET_MAC_CONFIG_PACING_1DW_1TX 0x5 -#define I40E_AQ_SET_MAC_CONFIG_PACING_3DW_2TX 0x4 -#define I40E_AQ_SET_MAC_CONFIG_PACING_7DW_3TX 0x3 -#define I40E_AQ_SET_MAC_CONFIG_PACING_4DW_1TX 0x2 -#define I40E_AQ_SET_MAC_CONFIG_PACING_9DW_1TX 0x1 - u8 tx_timer_priority; /* bitmap */ - __le16 tx_timer_value; - __le16 fc_refresh_threshold; - u8 reserved[8]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aq_set_mac_config); - -/* Restart Auto-Negotiation (direct 0x605) */ -struct i40e_aqc_set_link_restart_an { - u8 command; -#define I40E_AQ_PHY_RESTART_AN 0x02 -#define I40E_AQ_PHY_LINK_ENABLE 0x04 - u8 reserved[15]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_set_link_restart_an); - -/* Get Link Status cmd & response data structure (direct 0x0607) */ -struct i40e_aqc_get_link_status { - __le16 command_flags; /* only field set on command */ -#define I40E_AQ_LSE_MASK 0x3 -#define I40E_AQ_LSE_NOP 0x0 -#define I40E_AQ_LSE_DISABLE 0x2 -#define I40E_AQ_LSE_ENABLE 0x3 -/* only response uses this flag */ -#define I40E_AQ_LSE_IS_ENABLED 0x1 - u8 phy_type; /* i40e_aq_phy_type */ - u8 link_speed; /* i40e_aq_link_speed */ - u8 link_info; -#define I40E_AQ_LINK_UP 0x01 /* obsolete */ -#define I40E_AQ_LINK_UP_FUNCTION 0x01 -#define I40E_AQ_LINK_FAULT 0x02 -#define I40E_AQ_LINK_FAULT_TX 0x04 -#define I40E_AQ_LINK_FAULT_RX 0x08 -#define I40E_AQ_LINK_FAULT_REMOTE 0x10 -#define I40E_AQ_LINK_UP_PORT 0x20 -#define I40E_AQ_MEDIA_AVAILABLE 0x40 -#define I40E_AQ_SIGNAL_DETECT 0x80 - u8 an_info; -#define I40E_AQ_AN_COMPLETED 0x01 -#define I40E_AQ_LP_AN_ABILITY 0x02 -#define I40E_AQ_PD_FAULT 0x04 -#define I40E_AQ_FEC_EN 0x08 -#define I40E_AQ_PHY_LOW_POWER 0x10 -#define I40E_AQ_LINK_PAUSE_TX 0x20 -#define I40E_AQ_LINK_PAUSE_RX 0x40 -#define I40E_AQ_QUALIFIED_MODULE 0x80 - u8 ext_info; -#define I40E_AQ_LINK_PHY_TEMP_ALARM 0x01 -#define I40E_AQ_LINK_XCESSIVE_ERRORS 0x02 -#define I40E_AQ_LINK_TX_SHIFT 0x02 -#define I40E_AQ_LINK_TX_MASK (0x03 << I40E_AQ_LINK_TX_SHIFT) -#define I40E_AQ_LINK_TX_ACTIVE 0x00 -#define I40E_AQ_LINK_TX_DRAINED 0x01 -#define I40E_AQ_LINK_TX_FLUSHED 0x03 -#define I40E_AQ_LINK_FORCED_40G 0x10 -/* 25G Error Codes */ -#define I40E_AQ_25G_NO_ERR 0X00 -#define I40E_AQ_25G_NOT_PRESENT 0X01 -#define I40E_AQ_25G_NVM_CRC_ERR 0X02 -#define I40E_AQ_25G_SBUS_UCODE_ERR 0X03 -#define I40E_AQ_25G_SERDES_UCODE_ERR 0X04 -#define I40E_AQ_25G_NIMB_UCODE_ERR 0X05 - u8 loopback; /* use defines from i40e_aqc_set_lb_mode */ -/* Since firmware API 1.7 loopback field keeps power class info as well */ -#define I40E_AQ_LOOPBACK_MASK 0x07 -#define I40E_AQ_PWR_CLASS_SHIFT_LB 6 -#define I40E_AQ_PWR_CLASS_MASK_LB (0x03 << I40E_AQ_PWR_CLASS_SHIFT_LB) - __le16 max_frame_size; - u8 config; -#define I40E_AQ_CONFIG_FEC_KR_ENA 0x01 -#define I40E_AQ_CONFIG_FEC_RS_ENA 0x02 -#define I40E_AQ_CONFIG_CRC_ENA 0x04 -#define I40E_AQ_CONFIG_PACING_MASK 0x78 - union { - struct { - u8 power_desc; -#define I40E_AQ_LINK_POWER_CLASS_1 0x00 -#define I40E_AQ_LINK_POWER_CLASS_2 0x01 -#define I40E_AQ_LINK_POWER_CLASS_3 0x02 -#define I40E_AQ_LINK_POWER_CLASS_4 0x03 -#define I40E_AQ_PWR_CLASS_MASK 0x03 - u8 reserved[4]; - }; - struct { - u8 link_type[4]; - u8 link_type_ext; - }; - }; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_get_link_status); - -/* Set event mask command (direct 0x613) */ -struct i40e_aqc_set_phy_int_mask { - u8 reserved[8]; - __le16 event_mask; -#define I40E_AQ_EVENT_LINK_UPDOWN 0x0002 -#define I40E_AQ_EVENT_MEDIA_NA 0x0004 -#define I40E_AQ_EVENT_LINK_FAULT 0x0008 -#define I40E_AQ_EVENT_PHY_TEMP_ALARM 0x0010 -#define I40E_AQ_EVENT_EXCESSIVE_ERRORS 0x0020 -#define I40E_AQ_EVENT_SIGNAL_DETECT 0x0040 -#define I40E_AQ_EVENT_AN_COMPLETED 0x0080 -#define I40E_AQ_EVENT_MODULE_QUAL_FAIL 0x0100 -#define I40E_AQ_EVENT_PORT_TX_SUSPENDED 0x0200 - u8 reserved1[6]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_set_phy_int_mask); - -/* Get Local AN advt register (direct 0x0614) - * Set Local AN advt register (direct 0x0615) - * Get Link Partner AN advt register (direct 0x0616) - */ -struct i40e_aqc_an_advt_reg { - __le32 local_an_reg0; - __le16 local_an_reg1; - u8 reserved[10]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_an_advt_reg); - -/* Set Loopback mode (0x0618) */ -struct i40e_aqc_set_lb_mode { - __le16 lb_mode; -#define I40E_AQ_LB_PHY_LOCAL 0x01 -#define I40E_AQ_LB_PHY_REMOTE 0x02 -#define I40E_AQ_LB_MAC_LOCAL 0x04 - u8 reserved[14]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_set_lb_mode); - -/* Set PHY Debug command (0x0622) */ -struct i40e_aqc_set_phy_debug { - u8 command_flags; -#define I40E_AQ_PHY_DEBUG_RESET_INTERNAL 0x02 -#define I40E_AQ_PHY_DEBUG_RESET_EXTERNAL_SHIFT 2 -#define I40E_AQ_PHY_DEBUG_RESET_EXTERNAL_MASK (0x03 << \ - I40E_AQ_PHY_DEBUG_RESET_EXTERNAL_SHIFT) -#define I40E_AQ_PHY_DEBUG_RESET_EXTERNAL_NONE 0x00 -#define I40E_AQ_PHY_DEBUG_RESET_EXTERNAL_HARD 0x01 -#define I40E_AQ_PHY_DEBUG_RESET_EXTERNAL_SOFT 0x02 -#define I40E_AQ_PHY_DEBUG_DISABLE_LINK_FW 0x10 - u8 reserved[15]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_set_phy_debug); - -enum i40e_aq_phy_reg_type { - I40E_AQC_PHY_REG_INTERNAL = 0x1, - I40E_AQC_PHY_REG_EXERNAL_BASET = 0x2, - I40E_AQC_PHY_REG_EXERNAL_MODULE = 0x3 -}; - -/* Run PHY Activity (0x0626) */ -struct i40e_aqc_run_phy_activity { - __le16 activity_id; - u8 flags; - u8 reserved1; - __le32 control; - __le32 data; - u8 reserved2[4]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_run_phy_activity); - -/* Set PHY Register command (0x0628) */ -/* Get PHY Register command (0x0629) */ -struct i40e_aqc_phy_register_access { - u8 phy_interface; -#define I40E_AQ_PHY_REG_ACCESS_INTERNAL 0 -#define I40E_AQ_PHY_REG_ACCESS_EXTERNAL 1 -#define I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE 2 - u8 dev_address; - u8 reserved1[2]; - __le32 reg_address; - __le32 reg_value; - u8 reserved2[4]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_phy_register_access); - -/* NVM Read command (indirect 0x0701) - * NVM Erase commands (direct 0x0702) - * NVM Update commands (indirect 0x0703) - */ -struct i40e_aqc_nvm_update { - u8 command_flags; -#define I40E_AQ_NVM_LAST_CMD 0x01 -#define I40E_AQ_NVM_REARRANGE_TO_FLAT 0x20 -#define I40E_AQ_NVM_REARRANGE_TO_STRUCT 0x40 -#define I40E_AQ_NVM_FLASH_ONLY 0x80 -#define I40E_AQ_NVM_PRESERVATION_FLAGS_SHIFT 1 -#define I40E_AQ_NVM_PRESERVATION_FLAGS_MASK 0x03 -#define I40E_AQ_NVM_PRESERVATION_FLAGS_SELECTED 0x03 -#define I40E_AQ_NVM_PRESERVATION_FLAGS_ALL 0x01 - u8 module_pointer; - __le16 length; - __le32 offset; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_nvm_update); - -/* NVM Config Read (indirect 0x0704) */ -struct i40e_aqc_nvm_config_read { - __le16 cmd_flags; -#define I40E_AQ_ANVM_SINGLE_OR_MULTIPLE_FEATURES_MASK 1 -#define I40E_AQ_ANVM_READ_SINGLE_FEATURE 0 -#define I40E_AQ_ANVM_READ_MULTIPLE_FEATURES 1 - __le16 element_count; - __le16 element_id; /* Feature/field ID */ - __le16 element_id_msw; /* MSWord of field ID */ - __le32 address_high; - __le32 address_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_nvm_config_read); - -/* NVM Config Write (indirect 0x0705) */ -struct i40e_aqc_nvm_config_write { - __le16 cmd_flags; - __le16 element_count; - u8 reserved[4]; - __le32 address_high; - __le32 address_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_nvm_config_write); - -/* Used for 0x0704 as well as for 0x0705 commands */ -#define I40E_AQ_ANVM_FEATURE_OR_IMMEDIATE_SHIFT 1 -#define I40E_AQ_ANVM_FEATURE_OR_IMMEDIATE_MASK \ - BIT(I40E_AQ_ANVM_FEATURE_OR_IMMEDIATE_SHIFT) -#define I40E_AQ_ANVM_FEATURE 0 -#define I40E_AQ_ANVM_IMMEDIATE_FIELD BIT(FEATURE_OR_IMMEDIATE_SHIFT) -struct i40e_aqc_nvm_config_data_feature { - __le16 feature_id; -#define I40E_AQ_ANVM_FEATURE_OPTION_OEM_ONLY 0x01 -#define I40E_AQ_ANVM_FEATURE_OPTION_DWORD_MAP 0x08 -#define I40E_AQ_ANVM_FEATURE_OPTION_POR_CSR 0x10 - __le16 feature_options; - __le16 feature_selection; -}; - -I40E_CHECK_STRUCT_LEN(0x6, i40e_aqc_nvm_config_data_feature); - -struct i40e_aqc_nvm_config_data_immediate_field { - __le32 field_id; - __le32 field_value; - __le16 field_options; - __le16 reserved; -}; - -I40E_CHECK_STRUCT_LEN(0xc, i40e_aqc_nvm_config_data_immediate_field); - -/* OEM Post Update (indirect 0x0720) - * no command data struct used - */ - struct i40e_aqc_nvm_oem_post_update { -#define I40E_AQ_NVM_OEM_POST_UPDATE_EXTERNAL_DATA 0x01 - u8 sel_data; - u8 reserved[7]; -}; - -I40E_CHECK_STRUCT_LEN(0x8, i40e_aqc_nvm_oem_post_update); - -struct i40e_aqc_nvm_oem_post_update_buffer { - u8 str_len; - u8 dev_addr; - __le16 eeprom_addr; - u8 data[36]; -}; - -I40E_CHECK_STRUCT_LEN(0x28, i40e_aqc_nvm_oem_post_update_buffer); - -/* Thermal Sensor (indirect 0x0721) - * read or set thermal sensor configs and values - * takes a sensor and command specific data buffer, not detailed here - */ -struct i40e_aqc_thermal_sensor { - u8 sensor_action; -#define I40E_AQ_THERMAL_SENSOR_READ_CONFIG 0 -#define I40E_AQ_THERMAL_SENSOR_SET_CONFIG 1 -#define I40E_AQ_THERMAL_SENSOR_READ_TEMP 2 - u8 reserved[7]; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_thermal_sensor); - -/* Send to PF command (indirect 0x0801) id is only used by PF - * Send to VF command (indirect 0x0802) id is only used by PF - * Send to Peer PF command (indirect 0x0803) - */ -struct i40e_aqc_pf_vf_message { - __le32 id; - u8 reserved[4]; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_pf_vf_message); - -/* Alternate structure */ - -/* Direct write (direct 0x0900) - * Direct read (direct 0x0902) - */ -struct i40e_aqc_alternate_write { - __le32 address0; - __le32 data0; - __le32 address1; - __le32 data1; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_alternate_write); - -/* Indirect write (indirect 0x0901) - * Indirect read (indirect 0x0903) - */ - -struct i40e_aqc_alternate_ind_write { - __le32 address; - __le32 length; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_alternate_ind_write); - -/* Done alternate write (direct 0x0904) - * uses i40e_aq_desc - */ -struct i40e_aqc_alternate_write_done { - __le16 cmd_flags; -#define I40E_AQ_ALTERNATE_MODE_BIOS_MASK 1 -#define I40E_AQ_ALTERNATE_MODE_BIOS_LEGACY 0 -#define I40E_AQ_ALTERNATE_MODE_BIOS_UEFI 1 -#define I40E_AQ_ALTERNATE_RESET_NEEDED 2 - u8 reserved[14]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_alternate_write_done); - -/* Set OEM mode (direct 0x0905) */ -struct i40e_aqc_alternate_set_mode { - __le32 mode; -#define I40E_AQ_ALTERNATE_MODE_NONE 0 -#define I40E_AQ_ALTERNATE_MODE_OEM 1 - u8 reserved[12]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_alternate_set_mode); - -/* Clear port Alternate RAM (direct 0x0906) uses i40e_aq_desc */ - -/* async events 0x10xx */ - -/* Lan Queue Overflow Event (direct, 0x1001) */ -struct i40e_aqc_lan_overflow { - __le32 prtdcb_rupto; - __le32 otx_ctl; - u8 reserved[8]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_lan_overflow); - -/* Get LLDP MIB (indirect 0x0A00) */ -struct i40e_aqc_lldp_get_mib { - u8 type; - u8 reserved1; -#define I40E_AQ_LLDP_MIB_TYPE_MASK 0x3 -#define I40E_AQ_LLDP_MIB_LOCAL 0x0 -#define I40E_AQ_LLDP_MIB_REMOTE 0x1 -#define I40E_AQ_LLDP_MIB_LOCAL_AND_REMOTE 0x2 -#define I40E_AQ_LLDP_BRIDGE_TYPE_MASK 0xC -#define I40E_AQ_LLDP_BRIDGE_TYPE_SHIFT 0x2 -#define I40E_AQ_LLDP_BRIDGE_TYPE_NEAREST_BRIDGE 0x0 -#define I40E_AQ_LLDP_BRIDGE_TYPE_NON_TPMR 0x1 -#define I40E_AQ_LLDP_TX_SHIFT 0x4 -#define I40E_AQ_LLDP_TX_MASK (0x03 << I40E_AQ_LLDP_TX_SHIFT) -/* TX pause flags use I40E_AQ_LINK_TX_* above */ - __le16 local_len; - __le16 remote_len; - u8 reserved2[2]; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_lldp_get_mib); - -/* Configure LLDP MIB Change Event (direct 0x0A01) - * also used for the event (with type in the command field) - */ -struct i40e_aqc_lldp_update_mib { - u8 command; -#define I40E_AQ_LLDP_MIB_UPDATE_ENABLE 0x0 -#define I40E_AQ_LLDP_MIB_UPDATE_DISABLE 0x1 - u8 reserved[7]; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_lldp_update_mib); - -/* Add LLDP TLV (indirect 0x0A02) - * Delete LLDP TLV (indirect 0x0A04) - */ -struct i40e_aqc_lldp_add_tlv { - u8 type; /* only nearest bridge and non-TPMR from 0x0A00 */ - u8 reserved1[1]; - __le16 len; - u8 reserved2[4]; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_lldp_add_tlv); - -/* Update LLDP TLV (indirect 0x0A03) */ -struct i40e_aqc_lldp_update_tlv { - u8 type; /* only nearest bridge and non-TPMR from 0x0A00 */ - u8 reserved; - __le16 old_len; - __le16 new_offset; - __le16 new_len; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_lldp_update_tlv); - -/* Stop LLDP (direct 0x0A05) */ -struct i40e_aqc_lldp_stop { - u8 command; -#define I40E_AQ_LLDP_AGENT_STOP 0x0 -#define I40E_AQ_LLDP_AGENT_SHUTDOWN 0x1 - u8 reserved[15]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_lldp_stop); - -/* Start LLDP (direct 0x0A06) */ - -struct i40e_aqc_lldp_start { - u8 command; -#define I40E_AQ_LLDP_AGENT_START 0x1 - u8 reserved[15]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_lldp_start); - -/* Set DCB (direct 0x0303) */ -struct i40e_aqc_set_dcb_parameters { - u8 command; -#define I40E_AQ_DCB_SET_AGENT 0x1 -#define I40E_DCB_VALID 0x1 - u8 valid_flags; - u8 reserved[14]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_set_dcb_parameters); - -/* Apply MIB changes (0x0A07) - * uses the generic struc as it contains no data - */ - -/* Add Udp Tunnel command and completion (direct 0x0B00) */ -struct i40e_aqc_add_udp_tunnel { - __le16 udp_port; - u8 reserved0[3]; - u8 protocol_type; -#define I40E_AQC_TUNNEL_TYPE_VXLAN 0x00 -#define I40E_AQC_TUNNEL_TYPE_NGE 0x01 -#define I40E_AQC_TUNNEL_TYPE_TEREDO 0x10 -#define I40E_AQC_TUNNEL_TYPE_VXLAN_GPE 0x11 - u8 reserved1[10]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_udp_tunnel); - -struct i40e_aqc_add_udp_tunnel_completion { - __le16 udp_port; - u8 filter_entry_index; - u8 multiple_pfs; -#define I40E_AQC_SINGLE_PF 0x0 -#define I40E_AQC_MULTIPLE_PFS 0x1 - u8 total_filters; - u8 reserved[11]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_add_udp_tunnel_completion); - -/* remove UDP Tunnel command (0x0B01) */ -struct i40e_aqc_remove_udp_tunnel { - u8 reserved[2]; - u8 index; /* 0 to 15 */ - u8 reserved2[13]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_remove_udp_tunnel); - -struct i40e_aqc_del_udp_tunnel_completion { - __le16 udp_port; - u8 index; /* 0 to 15 */ - u8 multiple_pfs; - u8 total_filters_used; - u8 reserved1[11]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_del_udp_tunnel_completion); - -struct i40e_aqc_get_set_rss_key { -#define I40E_AQC_SET_RSS_KEY_VSI_VALID BIT(15) -#define I40E_AQC_SET_RSS_KEY_VSI_ID_SHIFT 0 -#define I40E_AQC_SET_RSS_KEY_VSI_ID_MASK (0x3FF << \ - I40E_AQC_SET_RSS_KEY_VSI_ID_SHIFT) - __le16 vsi_id; - u8 reserved[6]; - __le32 addr_high; - __le32 addr_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_get_set_rss_key); - -struct i40e_aqc_get_set_rss_key_data { - u8 standard_rss_key[0x28]; - u8 extended_hash_key[0xc]; -}; - -I40E_CHECK_STRUCT_LEN(0x34, i40e_aqc_get_set_rss_key_data); - -struct i40e_aqc_get_set_rss_lut { -#define I40E_AQC_SET_RSS_LUT_VSI_VALID BIT(15) -#define I40E_AQC_SET_RSS_LUT_VSI_ID_SHIFT 0 -#define I40E_AQC_SET_RSS_LUT_VSI_ID_MASK (0x3FF << \ - I40E_AQC_SET_RSS_LUT_VSI_ID_SHIFT) - __le16 vsi_id; -#define I40E_AQC_SET_RSS_LUT_TABLE_TYPE_SHIFT 0 -#define I40E_AQC_SET_RSS_LUT_TABLE_TYPE_MASK \ - BIT(I40E_AQC_SET_RSS_LUT_TABLE_TYPE_SHIFT) - -#define I40E_AQC_SET_RSS_LUT_TABLE_TYPE_VSI 0 -#define I40E_AQC_SET_RSS_LUT_TABLE_TYPE_PF 1 - __le16 flags; - u8 reserved[4]; + u8 reserved[4]; __le32 addr_high; __le32 addr_low; };

I40E_CHECK_CMD_LENGTH(i40e_aqc_get_set_rss_lut); - -/* tunnel key structure 0x0B10 */ - -struct i40e_aqc_tunnel_key_structure_A0 { - __le16 key1_off; - __le16 key1_len; - __le16 key2_off; - __le16 key2_len; - __le16 flags; -#define I40E_AQC_TUNNEL_KEY_STRUCT_OVERRIDE 0x01 -/* response flags */ -#define I40E_AQC_TUNNEL_KEY_STRUCT_SUCCESS 0x01 -#define I40E_AQC_TUNNEL_KEY_STRUCT_MODIFIED 0x02 -#define I40E_AQC_TUNNEL_KEY_STRUCT_OVERRIDDEN 0x03 - u8 resreved[6]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_tunnel_key_structure_A0); - -struct i40e_aqc_tunnel_key_structure { - u8 key1_off; - u8 key2_off; - u8 key1_len; /* 0 to 15 */ - u8 key2_len; /* 0 to 15 */ - u8 flags; -#define I40E_AQC_TUNNEL_KEY_STRUCT_OVERRIDE 0x01 -/* response flags */ -#define I40E_AQC_TUNNEL_KEY_STRUCT_SUCCESS 0x01 -#define I40E_AQC_TUNNEL_KEY_STRUCT_MODIFIED 0x02 -#define I40E_AQC_TUNNEL_KEY_STRUCT_OVERRIDDEN 0x03 - u8 network_key_index; -#define I40E_AQC_NETWORK_KEY_INDEX_VXLAN 0x0 -#define I40E_AQC_NETWORK_KEY_INDEX_NGE 0x1 -#define I40E_AQC_NETWORK_KEY_INDEX_FLEX_MAC_IN_UDP 0x2 -#define I40E_AQC_NETWORK_KEY_INDEX_GRE 0x3 - u8 reserved[10]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_tunnel_key_structure); - -/* OEM mode commands (direct 0xFE0x) */ -struct i40e_aqc_oem_param_change { - __le32 param_type; -#define I40E_AQ_OEM_PARAM_TYPE_PF_CTL 0 -#define I40E_AQ_OEM_PARAM_TYPE_BW_CTL 1 -#define I40E_AQ_OEM_PARAM_MAC 2 - __le32 param_value1; - __le16 param_value2; - u8 reserved[6]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_oem_param_change); - -struct i40e_aqc_oem_state_change { - __le32 state; -#define I40E_AQ_OEM_STATE_LINK_DOWN 0x0 -#define I40E_AQ_OEM_STATE_LINK_UP 0x1 - u8 reserved[12]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_oem_state_change); - -/* Initialize OCSD (0xFE02, direct) */ -struct i40e_aqc_opc_oem_ocsd_initialize { - u8 type_status; - u8 reserved1[3]; - __le32 ocsd_memory_block_addr_high; - __le32 ocsd_memory_block_addr_low; - __le32 requested_update_interval; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_opc_oem_ocsd_initialize); - -/* Initialize OCBB (0xFE03, direct) */ -struct i40e_aqc_opc_oem_ocbb_initialize { - u8 type_status; - u8 reserved1[3]; - __le32 ocbb_memory_block_addr_high; - __le32 ocbb_memory_block_addr_low; - u8 reserved2[4]; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_opc_oem_ocbb_initialize); - -/* debug commands */ - -/* get device id (0xFF00) uses the generic structure */ - -/* set test more (0xFF01, internal) */ - -struct i40e_acq_set_test_mode { - u8 mode; -#define I40E_AQ_TEST_PARTIAL 0 -#define I40E_AQ_TEST_FULL 1 -#define I40E_AQ_TEST_NVM 2 - u8 reserved[3]; - u8 command; -#define I40E_AQ_TEST_OPEN 0 -#define I40E_AQ_TEST_CLOSE 1 -#define I40E_AQ_TEST_INC 2 - u8 reserved2[3]; - __le32 address_high; - __le32 address_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_acq_set_test_mode); - -/* Debug Read Register command (0xFF03) - * Debug Write Register command (0xFF04) - */ -struct i40e_aqc_debug_reg_read_write { - __le32 reserved; - __le32 address; - __le32 value_high; - __le32 value_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_debug_reg_read_write); - -/* Scatter/gather Reg Read (indirect 0xFF05) - * Scatter/gather Reg Write (indirect 0xFF06) - */ - -/* i40e_aq_desc is used for the command */ -struct i40e_aqc_debug_reg_sg_element_data { - __le32 address; - __le32 value; -}; - -/* Debug Modify register (direct 0xFF07) */ -struct i40e_aqc_debug_modify_reg { - __le32 address; - __le32 value; - __le32 clear_mask; - __le32 set_mask; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_debug_modify_reg); - -/* dump internal data (0xFF08, indirect) */ - -#define I40E_AQ_CLUSTER_ID_AUX 0 -#define I40E_AQ_CLUSTER_ID_SWITCH_FLU 1 -#define I40E_AQ_CLUSTER_ID_TXSCHED 2 -#define I40E_AQ_CLUSTER_ID_HMC 3 -#define I40E_AQ_CLUSTER_ID_MAC0 4 -#define I40E_AQ_CLUSTER_ID_MAC1 5 -#define I40E_AQ_CLUSTER_ID_MAC2 6 -#define I40E_AQ_CLUSTER_ID_MAC3 7 -#define I40E_AQ_CLUSTER_ID_DCB 8 -#define I40E_AQ_CLUSTER_ID_EMP_MEM 9 -#define I40E_AQ_CLUSTER_ID_PKT_BUF 10 -#define I40E_AQ_CLUSTER_ID_ALTRAM 11 - -struct i40e_aqc_debug_dump_internals { - u8 cluster_id; - u8 table_id; - __le16 data_size; - __le32 idx; - __le32 address_high; - __le32 address_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_debug_dump_internals); - -struct i40e_aqc_debug_modify_internals { - u8 cluster_id; - u8 cluster_specific_params[7]; - __le32 address_high; - __le32 address_low; -}; - -I40E_CHECK_CMD_LENGTH(i40e_aqc_debug_modify_internals); - #endif /* _I40E_ADMINQ_CMD_H_ */ diff --git a/drivers/net/ethernet/intel/iavf/i40e_common.c b/drivers/net/ethernet/intel/iavf/i40e_common.c index eea280ba411ee..f34091d96f490 100644 --- a/drivers/net/ethernet/intel/iavf/i40e_common.c +++ b/drivers/net/ethernet/intel/iavf/i40e_common.c @@ -525,7 +525,6 @@ i40e_status i40evf_aq_set_rss_key(struct i40e_hw *hw, return i40e_aq_get_set_rss_key(hw, vsi_id, key, true); }

- /* The i40evf_ptype_lookup table is used to convert from the 8-bit ptype in the * hardware to a bit-field that can be used by SW to more easily determine the * packet type. @@ -891,135 +890,6 @@ struct i40e_rx_ptype_decoded i40evf_ptype_lookup[] = { I40E_PTT_UNUSED_ENTRY(255) };

-/** - * i40evf_aq_rx_ctl_read_register - use FW to read from an Rx control register - * @hw: pointer to the hw struct - * @reg_addr: register address - * @reg_val: ptr to register value - * @cmd_details: pointer to command details structure or NULL - * - * Use the firmware to read the Rx control register, - * especially useful if the Rx unit is under heavy pressure - **/ -i40e_status i40evf_aq_rx_ctl_read_register(struct i40e_hw *hw, - u32 reg_addr, u32 *reg_val, - struct i40e_asq_cmd_details *cmd_details) -{ - struct i40e_aq_desc desc; - struct i40e_aqc_rx_ctl_reg_read_write *cmd_resp = - (struct i40e_aqc_rx_ctl_reg_read_write *)&desc.params.raw; - i40e_status status; - - if (!reg_val) - return I40E_ERR_PARAM; - - i40evf_fill_default_direct_cmd_desc(&desc, - i40e_aqc_opc_rx_ctl_reg_read); - - cmd_resp->address = cpu_to_le32(reg_addr); - - status = i40evf_asq_send_command(hw, &desc, NULL, 0, cmd_details); - - if (status == 0) - *reg_val = le32_to_cpu(cmd_resp->value); - - return status; -} - -/** - * i40evf_read_rx_ctl - read from an Rx control register - * @hw: pointer to the hw struct - * @reg_addr: register address - **/ -u32 i40evf_read_rx_ctl(struct i40e_hw *hw, u32 reg_addr) -{ - i40e_status status = 0; - bool use_register; - int retry = 5; - u32 val = 0; - - use_register = (((hw->aq.api_maj_ver == 1) && - (hw->aq.api_min_ver < 5)) || - (hw->mac.type == I40E_MAC_X722)); - if (!use_register) { -do_retry: - status = i40evf_aq_rx_ctl_read_register(hw, reg_addr, - &val, NULL); - if (hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN && retry) { - usleep_range(1000, 2000); - retry--; - goto do_retry; - } - } - - /* if the AQ access failed, try the old-fashioned way */ - if (status || use_register) - val = rd32(hw, reg_addr); - - return val; -} - -/** - * i40evf_aq_rx_ctl_write_register - * @hw: pointer to the hw struct - * @reg_addr: register address - * @reg_val: register value - * @cmd_details: pointer to command details structure or NULL - * - * Use the firmware to write to an Rx control register, - * especially useful if the Rx unit is under heavy pressure - **/ -i40e_status i40evf_aq_rx_ctl_write_register(struct i40e_hw *hw, - u32 reg_addr, u32 reg_val, - struct i40e_asq_cmd_details *cmd_details) -{ - struct i40e_aq_desc desc; - struct i40e_aqc_rx_ctl_reg_read_write *cmd = - (struct i40e_aqc_rx_ctl_reg_read_write *)&desc.params.raw; - i40e_status status; - - i40evf_fill_default_direct_cmd_desc(&desc, - i40e_aqc_opc_rx_ctl_reg_write); - - cmd->address = cpu_to_le32(reg_addr); - cmd->value = cpu_to_le32(reg_val); - - status = i40evf_asq_send_command(hw, &desc, NULL, 0, cmd_details); - - return status; -} - -/** - * i40evf_write_rx_ctl - write to an Rx control register - * @hw: pointer to the hw struct - * @reg_addr: register address - * @reg_val: register value - **/ -void i40evf_write_rx_ctl(struct i40e_hw *hw, u32 reg_addr, u32 reg_val) -{ - i40e_status status = 0; - bool use_register; - int retry = 5; - - use_register = (((hw->aq.api_maj_ver == 1) && - (hw->aq.api_min_ver < 5)) || - (hw->mac.type == I40E_MAC_X722)); - if (!use_register) { -do_retry: - status = i40evf_aq_rx_ctl_write_register(hw, reg_addr, - reg_val, NULL); - if (hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN && retry) { - usleep_range(1000, 2000); - retry--; - goto do_retry; - } - } - - /* if the AQ access failed, try the old-fashioned way */ - if (status || use_register) - wr32(hw, reg_addr, reg_val); -} - /** * i40e_aq_send_msg_to_pf * @hw: pointer to the hardware structure @@ -1110,211 +980,3 @@ i40e_status i40e_vf_reset(struct i40e_hw *hw) return i40e_aq_send_msg_to_pf(hw, VIRTCHNL_OP_RESET_VF, 0, NULL, 0, NULL); } - -/** - * i40evf_aq_write_ddp - Write dynamic device personalization (ddp) - * @hw: pointer to the hw struct - * @buff: command buffer (size in bytes = buff_size) - * @buff_size: buffer size in bytes - * @track_id: package tracking id - * @error_offset: returns error offset - * @error_info: returns error information - * @cmd_details: pointer to command details structure or NULL - **/ -enum -i40e_status_code i40evf_aq_write_ddp(struct i40e_hw *hw, void *buff, - u16 buff_size, u32 track_id, - u32 *error_offset, u32 *error_info, - struct i40e_asq_cmd_details *cmd_details) -{ - struct i40e_aq_desc desc; - struct i40e_aqc_write_personalization_profile *cmd = - (struct i40e_aqc_write_personalization_profile *) - &desc.params.raw; - struct i40e_aqc_write_ddp_resp *resp; - i40e_status status; - - i40evf_fill_default_direct_cmd_desc(&desc, - i40e_aqc_opc_write_personalization_profile); - - desc.flags |= cpu_to_le16(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD); - if (buff_size > I40E_AQ_LARGE_BUF) - desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); - - desc.datalen = cpu_to_le16(buff_size); - - cmd->profile_track_id = cpu_to_le32(track_id); - - status = i40evf_asq_send_command(hw, &desc, buff, buff_size, cmd_details); - if (!status) { - resp = (struct i40e_aqc_write_ddp_resp *)&desc.params.raw; - if (error_offset) - *error_offset = le32_to_cpu(resp->error_offset); - if (error_info) - *error_info = le32_to_cpu(resp->error_info); - } - - return status; -} - -/** - * i40evf_aq_get_ddp_list - Read dynamic device personalization (ddp) - * @hw: pointer to the hw struct - * @buff: command buffer (size in bytes = buff_size) - * @buff_size: buffer size in bytes - * @flags: AdminQ command flags - * @cmd_details: pointer to command details structure or NULL - **/ -enum -i40e_status_code i40evf_aq_get_ddp_list(struct i40e_hw *hw, void *buff, - u16 buff_size, u8 flags, - struct i40e_asq_cmd_details *cmd_details) -{ - struct i40e_aq_desc desc; - struct i40e_aqc_get_applied_profiles *cmd = - (struct i40e_aqc_get_applied_profiles *)&desc.params.raw; - i40e_status status; - - i40evf_fill_default_direct_cmd_desc(&desc, - i40e_aqc_opc_get_personalization_profile_list); - - desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); - if (buff_size > I40E_AQ_LARGE_BUF) - desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); - desc.datalen = cpu_to_le16(buff_size); - - cmd->flags = flags; - - status = i40evf_asq_send_command(hw, &desc, buff, buff_size, cmd_details); - - return status; -} - -/** - * i40evf_find_segment_in_package - * @segment_type: the segment type to search for (i.e., SEGMENT_TYPE_I40E) - * @pkg_hdr: pointer to the package header to be searched - * - * This function searches a package file for a particular segment type. On - * success it returns a pointer to the segment header, otherwise it will - * return NULL. - **/ -struct i40e_generic_seg_header * -i40evf_find_segment_in_package(u32 segment_type, - struct i40e_package_header *pkg_hdr) -{ - struct i40e_generic_seg_header *segment; - u32 i; - - /* Search all package segments for the requested segment type */ - for (i = 0; i < pkg_hdr->segment_count; i++) { - segment = - (struct i40e_generic_seg_header *)((u8 *)pkg_hdr + - pkg_hdr->segment_offset[i]); - - if (segment->type == segment_type) - return segment; - } - - return NULL; -} - -/** - * i40evf_write_profile - * @hw: pointer to the hardware structure - * @profile: pointer to the profile segment of the package to be downloaded - * @track_id: package tracking id - * - * Handles the download of a complete package. - */ -enum i40e_status_code -i40evf_write_profile(struct i40e_hw *hw, struct i40e_profile_segment *profile, - u32 track_id) -{ - i40e_status status = 0; - struct i40e_section_table *sec_tbl; - struct i40e_profile_section_header *sec = NULL; - u32 dev_cnt; - u32 vendor_dev_id; - u32 *nvm; - u32 section_size = 0; - u32 offset = 0, info = 0; - u32 i; - - dev_cnt = profile->device_table_count; - - for (i = 0; i < dev_cnt; i++) { - vendor_dev_id = profile->device_table[i].vendor_dev_id; - if ((vendor_dev_id >> 16) == PCI_VENDOR_ID_INTEL) - if (hw->device_id == (vendor_dev_id & 0xFFFF)) - break; - } - if (i == dev_cnt) { - i40e_debug(hw, I40E_DEBUG_PACKAGE, "Device doesn't support DDP"); - return I40E_ERR_DEVICE_NOT_SUPPORTED; - } - - nvm = (u32 *)&profile->device_table[dev_cnt]; - sec_tbl = (struct i40e_section_table *)&nvm[nvm[0] + 1]; - - for (i = 0; i < sec_tbl->section_count; i++) { - sec = (struct i40e_profile_section_header *)((u8 *)profile + - sec_tbl->section_offset[i]); - - /* Skip 'AQ', 'note' and 'name' sections */ - if (sec->section.type != SECTION_TYPE_MMIO) - continue; - - section_size = sec->section.size + - sizeof(struct i40e_profile_section_header); - - /* Write profile */ - status = i40evf_aq_write_ddp(hw, (void *)sec, (u16)section_size, - track_id, &offset, &info, NULL); - if (status) { - i40e_debug(hw, I40E_DEBUG_PACKAGE, - "Failed to write profile: offset %d, info %d", - offset, info); - break; - } - } - return status; -} - -/** - * i40evf_add_pinfo_to_list - * @hw: pointer to the hardware structure - * @profile: pointer to the profile segment of the package - * @profile_info_sec: buffer for information section - * @track_id: package tracking id - * - * Register a profile to the list of loaded profiles. - */ -enum i40e_status_code -i40evf_add_pinfo_to_list(struct i40e_hw *hw, - struct i40e_profile_segment *profile, - u8 *profile_info_sec, u32 track_id) -{ - i40e_status status = 0; - struct i40e_profile_section_header *sec = NULL; - struct i40e_profile_info *pinfo; - u32 offset = 0, info = 0; - - sec = (struct i40e_profile_section_header *)profile_info_sec; - sec->tbl_size = 1; - sec->data_end = sizeof(struct i40e_profile_section_header) + - sizeof(struct i40e_profile_info); - sec->section.type = SECTION_TYPE_INFO; - sec->section.offset = sizeof(struct i40e_profile_section_header); - sec->section.size = sizeof(struct i40e_profile_info); - pinfo = (struct i40e_profile_info *)(profile_info_sec + - sec->section.offset); - pinfo->track_id = track_id; - pinfo->version = profile->version; - pinfo->op = I40E_DDP_ADD_TRACKID; - memcpy(pinfo->name, profile->name, I40E_DDP_NAME_SIZE); - - status = i40evf_aq_write_ddp(hw, (void *)sec, sec->data_end, - track_id, &offset, &info, NULL); - return status; -} diff --git a/drivers/net/ethernet/intel/iavf/i40e_hmc.h b/drivers/net/ethernet/intel/iavf/i40e_hmc.h deleted file mode 100644 index 1c78de838857b..0000000000000 --- a/drivers/net/ethernet/intel/iavf/i40e_hmc.h +++ /dev/null @@ -1,215 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright(c) 2013 - 2018 Intel Corporation. */ - -#ifndef _I40E_HMC_H_ -#define _I40E_HMC_H_ - -#define I40E_HMC_MAX_BP_COUNT 512 - -/* forward-declare the HW struct for the compiler */ -struct i40e_hw; - -#define I40E_HMC_INFO_SIGNATURE 0x484D5347 /* HMSG */ -#define I40E_HMC_PD_CNT_IN_SD 512 -#define I40E_HMC_DIRECT_BP_SIZE 0x200000 /* 2M */ -#define I40E_HMC_PAGED_BP_SIZE 4096 -#define I40E_HMC_PD_BP_BUF_ALIGNMENT 4096 -#define I40E_FIRST_VF_FPM_ID 16 - -struct i40e_hmc_obj_info { - u64 base; /* base addr in FPM */ - u32 max_cnt; /* max count available for this hmc func */ - u32 cnt; /* count of objects driver actually wants to create */ - u64 size; /* size in bytes of one object */ -}; - -enum i40e_sd_entry_type { - I40E_SD_TYPE_INVALID = 0, - I40E_SD_TYPE_PAGED = 1, - I40E_SD_TYPE_DIRECT = 2 -}; - -struct i40e_hmc_bp { - enum i40e_sd_entry_type entry_type; - struct i40e_dma_mem addr; /* populate to be used by hw */ - u32 sd_pd_index; - u32 ref_cnt; -}; - -struct i40e_hmc_pd_entry { - struct i40e_hmc_bp bp; - u32 sd_index; - bool rsrc_pg; - bool valid; -}; - -struct i40e_hmc_pd_table { - struct i40e_dma_mem pd_page_addr; /* populate to be used by hw */ - struct i40e_hmc_pd_entry *pd_entry; /* [512] for sw book keeping */ - struct i40e_virt_mem pd_entry_virt_mem; /* virt mem for pd_entry */ - - u32 ref_cnt; - u32 sd_index; -}; - -struct i40e_hmc_sd_entry { - enum i40e_sd_entry_type entry_type; - bool valid; - - union { - struct i40e_hmc_pd_table pd_table; - struct i40e_hmc_bp bp; - } u; -}; - -struct i40e_hmc_sd_table { - struct i40e_virt_mem addr; /* used to track sd_entry allocations */ - u32 sd_cnt; - u32 ref_cnt; - struct i40e_hmc_sd_entry *sd_entry; /* (sd_cnt*512) entries max */ -}; - -struct i40e_hmc_info { - u32 signature; - /* equals to pci func num for PF and dynamically allocated for VFs */ - u8 hmc_fn_id; - u16 first_sd_index; /* index of the first available SD */ - - /* hmc objects */ - struct i40e_hmc_obj_info *hmc_obj; - struct i40e_virt_mem hmc_obj_virt_mem; - struct i40e_hmc_sd_table sd_table; -}; - -#define I40E_INC_SD_REFCNT(sd_table) ((sd_table)->ref_cnt++) -#define I40E_INC_PD_REFCNT(pd_table) ((pd_table)->ref_cnt++) -#define I40E_INC_BP_REFCNT(bp) ((bp)->ref_cnt++) - -#define I40E_DEC_SD_REFCNT(sd_table) ((sd_table)->ref_cnt--) -#define I40E_DEC_PD_REFCNT(pd_table) ((pd_table)->ref_cnt--) -#define I40E_DEC_BP_REFCNT(bp) ((bp)->ref_cnt--) - -/** - * I40E_SET_PF_SD_ENTRY - marks the sd entry as valid in the hardware - * @hw: pointer to our hw struct - * @pa: pointer to physical address - * @sd_index: segment descriptor index - * @type: if sd entry is direct or paged - **/ -#define I40E_SET_PF_SD_ENTRY(hw, pa, sd_index, type) \ -{ \ - u32 val1, val2, val3; \ - val1 = (u32)(upper_32_bits(pa)); \ - val2 = (u32)(pa) | (I40E_HMC_MAX_BP_COUNT << \ - I40E_PFHMC_SDDATALOW_PMSDBPCOUNT_SHIFT) | \ - ((((type) == I40E_SD_TYPE_PAGED) ? 0 : 1) << \ - I40E_PFHMC_SDDATALOW_PMSDTYPE_SHIFT) | \ - BIT(I40E_PFHMC_SDDATALOW_PMSDVALID_SHIFT); \ - val3 = (sd_index) | BIT_ULL(I40E_PFHMC_SDCMD_PMSDWR_SHIFT); \ - wr32((hw), I40E_PFHMC_SDDATAHIGH, val1); \ - wr32((hw), I40E_PFHMC_SDDATALOW, val2); \ - wr32((hw), I40E_PFHMC_SDCMD, val3); \ -} - -/** - * I40E_CLEAR_PF_SD_ENTRY - marks the sd entry as invalid in the hardware - * @hw: pointer to our hw struct - * @sd_index: segment descriptor index - * @type: if sd entry is direct or paged - **/ -#define I40E_CLEAR_PF_SD_ENTRY(hw, sd_index, type) \ -{ \ - u32 val2, val3; \ - val2 = (I40E_HMC_MAX_BP_COUNT << \ - I40E_PFHMC_SDDATALOW_PMSDBPCOUNT_SHIFT) | \ - ((((type) == I40E_SD_TYPE_PAGED) ? 0 : 1) << \ - I40E_PFHMC_SDDATALOW_PMSDTYPE_SHIFT); \ - val3 = (sd_index) | BIT_ULL(I40E_PFHMC_SDCMD_PMSDWR_SHIFT); \ - wr32((hw), I40E_PFHMC_SDDATAHIGH, 0); \ - wr32((hw), I40E_PFHMC_SDDATALOW, val2); \ - wr32((hw), I40E_PFHMC_SDCMD, val3); \ -} - -/** - * I40E_INVALIDATE_PF_HMC_PD - Invalidates the pd cache in the hardware - * @hw: pointer to our hw struct - * @sd_idx: segment descriptor index - * @pd_idx: page descriptor index - **/ -#define I40E_INVALIDATE_PF_HMC_PD(hw, sd_idx, pd_idx) \ - wr32((hw), I40E_PFHMC_PDINV, \ - (((sd_idx) << I40E_PFHMC_PDINV_PMSDIDX_SHIFT) | \ - ((pd_idx) << I40E_PFHMC_PDINV_PMPDIDX_SHIFT))) - -/** - * I40E_FIND_SD_INDEX_LIMIT - finds segment descriptor index limit - * @hmc_info: pointer to the HMC configuration information structure - * @type: type of HMC resources we're searching - * @index: starting index for the object - * @cnt: number of objects we're trying to create - * @sd_idx: pointer to return index of the segment descriptor in question - * @sd_limit: pointer to return the maximum number of segment descriptors - * - * This function calculates the segment descriptor index and index limit - * for the resource defined by i40e_hmc_rsrc_type. - **/ -#define I40E_FIND_SD_INDEX_LIMIT(hmc_info, type, index, cnt, sd_idx, sd_limit)\ -{ \ - u64 fpm_addr, fpm_limit; \ - fpm_addr = (hmc_info)->hmc_obj[(type)].base + \ - (hmc_info)->hmc_obj[(type)].size * (index); \ - fpm_limit = fpm_addr + (hmc_info)->hmc_obj[(type)].size * (cnt);\ - *(sd_idx) = (u32)(fpm_addr / I40E_HMC_DIRECT_BP_SIZE); \ - *(sd_limit) = (u32)((fpm_limit - 1) / I40E_HMC_DIRECT_BP_SIZE); \ - /* add one more to the limit to correct our range */ \ - *(sd_limit) += 1; \ -} - -/** - * I40E_FIND_PD_INDEX_LIMIT - finds page descriptor index limit - * @hmc_info: pointer to the HMC configuration information struct - * @type: HMC resource type we're examining - * @idx: starting index for the object - * @cnt: number of objects we're trying to create - * @pd_index: pointer to return page descriptor index - * @pd_limit: pointer to return page descriptor index limit - * - * Calculates the page descriptor index and index limit for the resource - * defined by i40e_hmc_rsrc_type. - **/ -#define I40E_FIND_PD_INDEX_LIMIT(hmc_info, type, idx, cnt, pd_index, pd_limit)\ -{ \ - u64 fpm_adr, fpm_limit; \ - fpm_adr = (hmc_info)->hmc_obj[(type)].base + \ - (hmc_info)->hmc_obj[(type)].size * (idx); \ - fpm_limit = fpm_adr + (hmc_info)->hmc_obj[(type)].size * (cnt); \ - *(pd_index) = (u32)(fpm_adr / I40E_HMC_PAGED_BP_SIZE); \ - *(pd_limit) = (u32)((fpm_limit - 1) / I40E_HMC_PAGED_BP_SIZE); \ - /* add one more to the limit to correct our range */ \ - *(pd_limit) += 1; \ -} -i40e_status i40e_add_sd_table_entry(struct i40e_hw *hw, - struct i40e_hmc_info *hmc_info, - u32 sd_index, - enum i40e_sd_entry_type type, - u64 direct_mode_sz); - -i40e_status i40e_add_pd_table_entry(struct i40e_hw *hw, - struct i40e_hmc_info *hmc_info, - u32 pd_index, - struct i40e_dma_mem *rsrc_pg); -i40e_status i40e_remove_pd_bp(struct i40e_hw *hw, - struct i40e_hmc_info *hmc_info, - u32 idx); -i40e_status i40e_prep_remove_sd_bp(struct i40e_hmc_info *hmc_info, - u32 idx); -i40e_status i40e_remove_sd_bp_new(struct i40e_hw *hw, - struct i40e_hmc_info *hmc_info, - u32 idx, bool is_pf); -i40e_status i40e_prep_remove_pd_page(struct i40e_hmc_info *hmc_info, - u32 idx); -i40e_status i40e_remove_pd_page_new(struct i40e_hw *hw, - struct i40e_hmc_info *hmc_info, - u32 idx, bool is_pf); - -#endif /* _I40E_HMC_H_ */ diff --git a/drivers/net/ethernet/intel/iavf/i40e_lan_hmc.h b/drivers/net/ethernet/intel/iavf/i40e_lan_hmc.h deleted file mode 100644 index 82b00f70a6320..0000000000000 --- a/drivers/net/ethernet/intel/iavf/i40e_lan_hmc.h +++ /dev/null @@ -1,158 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright(c) 2013 - 2018 Intel Corporation. */ - -#ifndef _I40E_LAN_HMC_H_ -#define _I40E_LAN_HMC_H_ - -/* forward-declare the HW struct for the compiler */ -struct i40e_hw; - -/* HMC element context information */ - -/* Rx queue context data - * - * The sizes of the variables may be larger than needed due to crossing byte - * boundaries. If we do not have the width of the variable set to the correct - * size then we could end up shifting bits off the top of the variable when the - * variable is at the top of a byte and crosses over into the next byte. - */ -struct i40e_hmc_obj_rxq { - u16 head; - u16 cpuid; /* bigger than needed, see above for reason */ - u64 base; - u16 qlen; -#define I40E_RXQ_CTX_DBUFF_SHIFT 7 - u16 dbuff; /* bigger than needed, see above for reason */ -#define I40E_RXQ_CTX_HBUFF_SHIFT 6 - u16 hbuff; /* bigger than needed, see above for reason */ - u8 dtype; - u8 dsize; - u8 crcstrip; - u8 fc_ena; - u8 l2tsel; - u8 hsplit_0; - u8 hsplit_1; - u8 showiv; - u32 rxmax; /* bigger than needed, see above for reason */ - u8 tphrdesc_ena; - u8 tphwdesc_ena; - u8 tphdata_ena; - u8 tphhead_ena; - u16 lrxqthresh; /* bigger than needed, see above for reason */ - u8 prefena; /* NOTE: normally must be set to 1 at init */ -}; - -/* Tx queue context data -* -* The sizes of the variables may be larger than needed due to crossing byte -* boundaries. If we do not have the width of the variable set to the correct -* size then we could end up shifting bits off the top of the variable when the -* variable is at the top of a byte and crosses over into the next byte. -*/ -struct i40e_hmc_obj_txq { - u16 head; - u8 new_context; - u64 base; - u8 fc_ena; - u8 timesync_ena; - u8 fd_ena; - u8 alt_vlan_ena; - u16 thead_wb; - u8 cpuid; - u8 head_wb_ena; - u16 qlen; - u8 tphrdesc_ena; - u8 tphrpacket_ena; - u8 tphwdesc_ena; - u64 head_wb_addr; - u32 crc; - u16 rdylist; - u8 rdylist_act; -}; - -/* for hsplit_0 field of Rx HMC context */ -enum i40e_hmc_obj_rx_hsplit_0 { - I40E_HMC_OBJ_RX_HSPLIT_0_NO_SPLIT = 0, - I40E_HMC_OBJ_RX_HSPLIT_0_SPLIT_L2 = 1, - I40E_HMC_OBJ_RX_HSPLIT_0_SPLIT_IP = 2, - I40E_HMC_OBJ_RX_HSPLIT_0_SPLIT_TCP_UDP = 4, - I40E_HMC_OBJ_RX_HSPLIT_0_SPLIT_SCTP = 8, -}; - -/* fcoe_cntx and fcoe_filt are for debugging purpose only */ -struct i40e_hmc_obj_fcoe_cntx { - u32 rsv[32]; -}; - -struct i40e_hmc_obj_fcoe_filt { - u32 rsv[8]; -}; - -/* Context sizes for LAN objects */ -enum i40e_hmc_lan_object_size { - I40E_HMC_LAN_OBJ_SZ_8 = 0x3, - I40E_HMC_LAN_OBJ_SZ_16 = 0x4, - I40E_HMC_LAN_OBJ_SZ_32 = 0x5, - I40E_HMC_LAN_OBJ_SZ_64 = 0x6, - I40E_HMC_LAN_OBJ_SZ_128 = 0x7, - I40E_HMC_LAN_OBJ_SZ_256 = 0x8, - I40E_HMC_LAN_OBJ_SZ_512 = 0x9, -}; - -#define I40E_HMC_L2OBJ_BASE_ALIGNMENT 512 -#define I40E_HMC_OBJ_SIZE_TXQ 128 -#define I40E_HMC_OBJ_SIZE_RXQ 32 -#define I40E_HMC_OBJ_SIZE_FCOE_CNTX 128 -#define I40E_HMC_OBJ_SIZE_FCOE_FILT 64 - -enum i40e_hmc_lan_rsrc_type { - I40E_HMC_LAN_FULL = 0, - I40E_HMC_LAN_TX = 1, - I40E_HMC_LAN_RX = 2, - I40E_HMC_FCOE_CTX = 3, - I40E_HMC_FCOE_FILT = 4, - I40E_HMC_LAN_MAX = 5 -}; - -enum i40e_hmc_model { - I40E_HMC_MODEL_DIRECT_PREFERRED = 0, - I40E_HMC_MODEL_DIRECT_ONLY = 1, - I40E_HMC_MODEL_PAGED_ONLY = 2, - I40E_HMC_MODEL_UNKNOWN, -}; - -struct i40e_hmc_lan_create_obj_info { - struct i40e_hmc_info *hmc_info; - u32 rsrc_type; - u32 start_idx; - u32 count; - enum i40e_sd_entry_type entry_type; - u64 direct_mode_sz; -}; - -struct i40e_hmc_lan_delete_obj_info { - struct i40e_hmc_info *hmc_info; - u32 rsrc_type; - u32 start_idx; - u32 count; -}; - -i40e_status i40e_init_lan_hmc(struct i40e_hw *hw, u32 txq_num, - u32 rxq_num, u32 fcoe_cntx_num, - u32 fcoe_filt_num); -i40e_status i40e_configure_lan_hmc(struct i40e_hw *hw, - enum i40e_hmc_model model); -i40e_status i40e_shutdown_lan_hmc(struct i40e_hw *hw); - -i40e_status i40e_clear_lan_tx_queue_context(struct i40e_hw *hw, - u16 queue); -i40e_status i40e_set_lan_tx_queue_context(struct i40e_hw *hw, - u16 queue, - struct i40e_hmc_obj_txq *s); -i40e_status i40e_clear_lan_rx_queue_context(struct i40e_hw *hw, - u16 queue); -i40e_status i40e_set_lan_rx_queue_context(struct i40e_hw *hw, - u16 queue, - struct i40e_hmc_obj_rxq *s); - -#endif /* _I40E_LAN_HMC_H_ */ diff --git a/drivers/net/ethernet/intel/iavf/i40e_prototype.h b/drivers/net/ethernet/intel/iavf/i40e_prototype.h index a358f4b9d5aa6..ef7f74489bfc0 100644 --- a/drivers/net/ethernet/intel/iavf/i40e_prototype.h +++ b/drivers/net/ethernet/intel/iavf/i40e_prototype.h @@ -60,71 +60,12 @@ static inline struct i40e_rx_ptype_decoded decode_rx_desc_ptype(u8 ptype) return i40evf_ptype_lookup[ptype]; }

-/* prototype for functions used for SW locks */ - /* i40e_common for VF drivers*/ void i40e_vf_parse_hw_config(struct i40e_hw *hw, struct virtchnl_vf_resource *msg); i40e_status i40e_vf_reset(struct i40e_hw *hw); i40e_status i40e_aq_send_msg_to_pf(struct i40e_hw *hw, - enum virtchnl_ops v_opcode, - i40e_status v_retval, - u8 *msg, u16 msglen, - struct i40e_asq_cmd_details *cmd_details); -i40e_status i40e_set_filter_control(struct i40e_hw *hw, - struct i40e_filter_control_settings *settings); -i40e_status i40e_aq_add_rem_control_packet_filter(struct i40e_hw *hw, - u8 *mac_addr, u16 ethtype, u16 flags, - u16 vsi_seid, u16 queue, bool is_add, - struct i40e_control_filter_stats *stats, - struct i40e_asq_cmd_details *cmd_details); -void i40e_add_filter_to_drop_tx_flow_control_frames(struct i40e_hw *hw, - u16 vsi_seid); -i40e_status i40evf_aq_rx_ctl_read_register(struct i40e_hw *hw, - u32 reg_addr, u32 *reg_val, - struct i40e_asq_cmd_details *cmd_details); -u32 i40evf_read_rx_ctl(struct i40e_hw *hw, u32 reg_addr); -i40e_status i40evf_aq_rx_ctl_write_register(struct i40e_hw *hw, - u32 reg_addr, u32 reg_val, - struct i40e_asq_cmd_details *cmd_details); -void i40evf_write_rx_ctl(struct i40e_hw *hw, u32 reg_addr, u32 reg_val); -i40e_status i40e_aq_set_phy_register(struct i40e_hw *hw, - u8 phy_select, u8 dev_addr, - u32 reg_addr, u32 reg_val, - struct i40e_asq_cmd_details *cmd_details); -i40e_status i40e_aq_get_phy_register(struct i40e_hw *hw, - u8 phy_select, u8 dev_addr, - u32 reg_addr, u32 *reg_val, - struct i40e_asq_cmd_details *cmd_details); - -i40e_status i40e_read_phy_register(struct i40e_hw *hw, u8 page, - u16 reg, u8 phy_addr, u16 *value); -i40e_status i40e_write_phy_register(struct i40e_hw *hw, u8 page, - u16 reg, u8 phy_addr, u16 value); -i40e_status i40e_read_phy_register(struct i40e_hw *hw, u8 page, u16 reg, - u8 phy_addr, u16 *value); -i40e_status i40e_write_phy_register(struct i40e_hw *hw, u8 page, u16 reg, - u8 phy_addr, u16 value); -u8 i40e_get_phy_address(struct i40e_hw *hw, u8 dev_num); -i40e_status i40e_blink_phy_link_led(struct i40e_hw *hw, - u32 time, u32 interval); -i40e_status i40evf_aq_write_ddp(struct i40e_hw *hw, void *buff, - u16 buff_size, u32 track_id, - u32 *error_offset, u32 *error_info, - struct i40e_asq_cmd_details * - cmd_details); -i40e_status i40evf_aq_get_ddp_list(struct i40e_hw *hw, void *buff, - u16 buff_size, u8 flags, - struct i40e_asq_cmd_details * - cmd_details); -struct i40e_generic_seg_header * -i40evf_find_segment_in_package(u32 segment_type, - struct i40e_package_header *pkg_header); -enum i40e_status_code -i40evf_write_profile(struct i40e_hw *hw, struct i40e_profile_segment *i40e_seg, - u32 track_id); -enum i40e_status_code -i40evf_add_pinfo_to_list(struct i40e_hw *hw, - struct i40e_profile_segment *profile, - u8 *profile_info_sec, u32 track_id); + enum virtchnl_ops v_opcode, + i40e_status v_retval, u8 *msg, u16 msglen, + struct i40e_asq_cmd_details *cmd_details); #endif /* _I40E_PROTOTYPE_H_ */ diff --git a/drivers/net/ethernet/intel/iavf/i40e_register.h b/drivers/net/ethernet/intel/iavf/i40e_register.h index 49e1f57d99cc6..20b464ac15420 100644 --- a/drivers/net/ethernet/intel/iavf/i40e_register.h +++ b/drivers/net/ethernet/intel/iavf/i40e_register.h @@ -4,40 +4,12 @@ #ifndef _I40E_REGISTER_H_ #define _I40E_REGISTER_H_

-#define I40E_VFMSIX_PBA1(_i) (0x00002000 + ((_i) * 4)) /* _i=0...19 */ /* Reset: VFLR */ -#define I40E_VFMSIX_PBA1_MAX_INDEX 19 -#define I40E_VFMSIX_PBA1_PENBIT_SHIFT 0 -#define I40E_VFMSIX_PBA1_PENBIT_MASK I40E_MASK(0xFFFFFFFF, I40E_VFMSIX_PBA1_PENBIT_SHIFT) -#define I40E_VFMSIX_TADD1(_i) (0x00002100 + ((_i) * 16)) /* _i=0...639 */ /* Reset: VFLR */ -#define I40E_VFMSIX_TADD1_MAX_INDEX 639 -#define I40E_VFMSIX_TADD1_MSIXTADD10_SHIFT 0 -#define I40E_VFMSIX_TADD1_MSIXTADD10_MASK I40E_MASK(0x3, I40E_VFMSIX_TADD1_MSIXTADD10_SHIFT) -#define I40E_VFMSIX_TADD1_MSIXTADD_SHIFT 2 -#define I40E_VFMSIX_TADD1_MSIXTADD_MASK I40E_MASK(0x3FFFFFFF, I40E_VFMSIX_TADD1_MSIXTADD_SHIFT) -#define I40E_VFMSIX_TMSG1(_i) (0x00002108 + ((_i) * 16)) /* _i=0...639 */ /* Reset: VFLR */ -#define I40E_VFMSIX_TMSG1_MAX_INDEX 639 -#define I40E_VFMSIX_TMSG1_MSIXTMSG_SHIFT 0 -#define I40E_VFMSIX_TMSG1_MSIXTMSG_MASK I40E_MASK(0xFFFFFFFF, I40E_VFMSIX_TMSG1_MSIXTMSG_SHIFT) -#define I40E_VFMSIX_TUADD1(_i) (0x00002104 + ((_i) * 16)) /* _i=0...639 */ /* Reset: VFLR */ -#define I40E_VFMSIX_TUADD1_MAX_INDEX 639 -#define I40E_VFMSIX_TUADD1_MSIXTUADD_SHIFT 0 -#define I40E_VFMSIX_TUADD1_MSIXTUADD_MASK I40E_MASK(0xFFFFFFFF, I40E_VFMSIX_TUADD1_MSIXTUADD_SHIFT) -#define I40E_VFMSIX_TVCTRL1(_i) (0x0000210C + ((_i) * 16)) /* _i=0...639 */ /* Reset: VFLR */ -#define I40E_VFMSIX_TVCTRL1_MAX_INDEX 639 -#define I40E_VFMSIX_TVCTRL1_MASK_SHIFT 0 -#define I40E_VFMSIX_TVCTRL1_MASK_MASK I40E_MASK(0x1, I40E_VFMSIX_TVCTRL1_MASK_SHIFT) #define I40E_VF_ARQBAH1 0x00006000 /* Reset: EMPR */ -#define I40E_VF_ARQBAH1_ARQBAH_SHIFT 0 -#define I40E_VF_ARQBAH1_ARQBAH_MASK I40E_MASK(0xFFFFFFFF, I40E_VF_ARQBAH1_ARQBAH_SHIFT) #define I40E_VF_ARQBAL1 0x00006C00 /* Reset: EMPR */ -#define I40E_VF_ARQBAL1_ARQBAL_SHIFT 0 -#define I40E_VF_ARQBAL1_ARQBAL_MASK I40E_MASK(0xFFFFFFFF, I40E_VF_ARQBAL1_ARQBAL_SHIFT) #define I40E_VF_ARQH1 0x00007400 /* Reset: EMPR */ #define I40E_VF_ARQH1_ARQH_SHIFT 0 #define I40E_VF_ARQH1_ARQH_MASK I40E_MASK(0x3FF, I40E_VF_ARQH1_ARQH_SHIFT) #define I40E_VF_ARQLEN1 0x00008000 /* Reset: EMPR */ -#define I40E_VF_ARQLEN1_ARQLEN_SHIFT 0 -#define I40E_VF_ARQLEN1_ARQLEN_MASK I40E_MASK(0x3FF, I40E_VF_ARQLEN1_ARQLEN_SHIFT) #define I40E_VF_ARQLEN1_ARQVFE_SHIFT 28 #define I40E_VF_ARQLEN1_ARQVFE_MASK I40E_MASK(0x1, I40E_VF_ARQLEN1_ARQVFE_SHIFT) #define I40E_VF_ARQLEN1_ARQOVFL_SHIFT 29 @@ -47,20 +19,10 @@ #define I40E_VF_ARQLEN1_ARQENABLE_SHIFT 31 #define I40E_VF_ARQLEN1_ARQENABLE_MASK I40E_MASK(0x1, I40E_VF_ARQLEN1_ARQENABLE_SHIFT) #define I40E_VF_ARQT1 0x00007000 /* Reset: EMPR */ -#define I40E_VF_ARQT1_ARQT_SHIFT 0 -#define I40E_VF_ARQT1_ARQT_MASK I40E_MASK(0x3FF, I40E_VF_ARQT1_ARQT_SHIFT) #define I40E_VF_ATQBAH1 0x00007800 /* Reset: EMPR */ -#define I40E_VF_ATQBAH1_ATQBAH_SHIFT 0 -#define I40E_VF_ATQBAH1_ATQBAH_MASK I40E_MASK(0xFFFFFFFF, I40E_VF_ATQBAH1_ATQBAH_SHIFT) #define I40E_VF_ATQBAL1 0x00007C00 /* Reset: EMPR */ -#define I40E_VF_ATQBAL1_ATQBAL_SHIFT 0 -#define I40E_VF_ATQBAL1_ATQBAL_MASK I40E_MASK(0xFFFFFFFF, I40E_VF_ATQBAL1_ATQBAL_SHIFT) #define I40E_VF_ATQH1 0x00006400 /* Reset: EMPR */ -#define I40E_VF_ATQH1_ATQH_SHIFT 0 -#define I40E_VF_ATQH1_ATQH_MASK I40E_MASK(0x3FF, I40E_VF_ATQH1_ATQH_SHIFT) #define I40E_VF_ATQLEN1 0x00006800 /* Reset: EMPR */ -#define I40E_VF_ATQLEN1_ATQLEN_SHIFT 0 -#define I40E_VF_ATQLEN1_ATQLEN_MASK I40E_MASK(0x3FF, I40E_VF_ATQLEN1_ATQLEN_SHIFT) #define I40E_VF_ATQLEN1_ATQVFE_SHIFT 28 #define I40E_VF_ATQLEN1_ATQVFE_MASK I40E_MASK(0x1, I40E_VF_ATQLEN1_ATQVFE_SHIFT) #define I40E_VF_ATQLEN1_ATQOVFL_SHIFT 29 @@ -70,244 +32,37 @@ #define I40E_VF_ATQLEN1_ATQENABLE_SHIFT 31 #define I40E_VF_ATQLEN1_ATQENABLE_MASK I40E_MASK(0x1, I40E_VF_ATQLEN1_ATQENABLE_SHIFT) #define I40E_VF_ATQT1 0x00008400 /* Reset: EMPR */ -#define I40E_VF_ATQT1_ATQT_SHIFT 0 -#define I40E_VF_ATQT1_ATQT_MASK I40E_MASK(0x3FF, I40E_VF_ATQT1_ATQT_SHIFT) #define I40E_VFGEN_RSTAT 0x00008800 /* Reset: VFR */ #define I40E_VFGEN_RSTAT_VFR_STATE_SHIFT 0 #define I40E_VFGEN_RSTAT_VFR_STATE_MASK I40E_MASK(0x3, I40E_VFGEN_RSTAT_VFR_STATE_SHIFT) #define I40E_VFINT_DYN_CTL01 0x00005C00 /* Reset: VFR */ #define I40E_VFINT_DYN_CTL01_INTENA_SHIFT 0 #define I40E_VFINT_DYN_CTL01_INTENA_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTL01_INTENA_SHIFT) -#define I40E_VFINT_DYN_CTL01_CLEARPBA_SHIFT 1 -#define I40E_VFINT_DYN_CTL01_CLEARPBA_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTL01_CLEARPBA_SHIFT) -#define I40E_VFINT_DYN_CTL01_SWINT_TRIG_SHIFT 2 -#define I40E_VFINT_DYN_CTL01_SWINT_TRIG_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTL01_SWINT_TRIG_SHIFT) #define I40E_VFINT_DYN_CTL01_ITR_INDX_SHIFT 3 #define I40E_VFINT_DYN_CTL01_ITR_INDX_MASK I40E_MASK(0x3, I40E_VFINT_DYN_CTL01_ITR_INDX_SHIFT) -#define I40E_VFINT_DYN_CTL01_INTERVAL_SHIFT 5 -#define I40E_VFINT_DYN_CTL01_INTERVAL_MASK I40E_MASK(0xFFF, I40E_VFINT_DYN_CTL01_INTERVAL_SHIFT) -#define I40E_VFINT_DYN_CTL01_SW_ITR_INDX_ENA_SHIFT 24 -#define I40E_VFINT_DYN_CTL01_SW_ITR_INDX_ENA_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTL01_SW_ITR_INDX_ENA_SHIFT) -#define I40E_VFINT_DYN_CTL01_SW_ITR_INDX_SHIFT 25 -#define I40E_VFINT_DYN_CTL01_SW_ITR_INDX_MASK I40E_MASK(0x3, I40E_VFINT_DYN_CTL01_SW_ITR_INDX_SHIFT) -#define I40E_VFINT_DYN_CTL01_INTENA_MSK_SHIFT 31 -#define I40E_VFINT_DYN_CTL01_INTENA_MSK_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTL01_INTENA_MSK_SHIFT) #define I40E_VFINT_DYN_CTLN1(_INTVF) (0x00003800 + ((_INTVF) * 4)) /* _i=0...15 */ /* Reset: VFR */ -#define I40E_VFINT_DYN_CTLN1_MAX_INDEX 15 #define I40E_VFINT_DYN_CTLN1_INTENA_SHIFT 0 #define I40E_VFINT_DYN_CTLN1_INTENA_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTLN1_INTENA_SHIFT) -#define I40E_VFINT_DYN_CTLN1_CLEARPBA_SHIFT 1 -#define I40E_VFINT_DYN_CTLN1_CLEARPBA_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTLN1_CLEARPBA_SHIFT) #define I40E_VFINT_DYN_CTLN1_SWINT_TRIG_SHIFT 2 #define I40E_VFINT_DYN_CTLN1_SWINT_TRIG_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTLN1_SWINT_TRIG_SHIFT) #define I40E_VFINT_DYN_CTLN1_ITR_INDX_SHIFT 3 #define I40E_VFINT_DYN_CTLN1_ITR_INDX_MASK I40E_MASK(0x3, I40E_VFINT_DYN_CTLN1_ITR_INDX_SHIFT) #define I40E_VFINT_DYN_CTLN1_INTERVAL_SHIFT 5 -#define I40E_VFINT_DYN_CTLN1_INTERVAL_MASK I40E_MASK(0xFFF, I40E_VFINT_DYN_CTLN1_INTERVAL_SHIFT) #define I40E_VFINT_DYN_CTLN1_SW_ITR_INDX_ENA_SHIFT 24 #define I40E_VFINT_DYN_CTLN1_SW_ITR_INDX_ENA_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTLN1_SW_ITR_INDX_ENA_SHIFT) -#define I40E_VFINT_DYN_CTLN1_SW_ITR_INDX_SHIFT 25 -#define I40E_VFINT_DYN_CTLN1_SW_ITR_INDX_MASK I40E_MASK(0x3, I40E_VFINT_DYN_CTLN1_SW_ITR_INDX_SHIFT) -#define I40E_VFINT_DYN_CTLN1_INTENA_MSK_SHIFT 31 -#define I40E_VFINT_DYN_CTLN1_INTENA_MSK_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTLN1_INTENA_MSK_SHIFT) #define I40E_VFINT_ICR0_ENA1 0x00005000 /* Reset: CORER */ -#define I40E_VFINT_ICR0_ENA1_LINK_STAT_CHANGE_SHIFT 25 -#define I40E_VFINT_ICR0_ENA1_LINK_STAT_CHANGE_MASK I40E_MASK(0x1, I40E_VFINT_ICR0_ENA1_LINK_STAT_CHANGE_SHIFT) #define I40E_VFINT_ICR0_ENA1_ADMINQ_SHIFT 30 #define I40E_VFINT_ICR0_ENA1_ADMINQ_MASK I40E_MASK(0x1, I40E_VFINT_ICR0_ENA1_ADMINQ_SHIFT) #define I40E_VFINT_ICR0_ENA1_RSVD_SHIFT 31 -#define I40E_VFINT_ICR0_ENA1_RSVD_MASK I40E_MASK(0x1, I40E_VFINT_ICR0_ENA1_RSVD_SHIFT) #define I40E_VFINT_ICR01 0x00004800 /* Reset: CORER */ -#define I40E_VFINT_ICR01_INTEVENT_SHIFT 0 -#define I40E_VFINT_ICR01_INTEVENT_MASK I40E_MASK(0x1, I40E_VFINT_ICR01_INTEVENT_SHIFT) -#define I40E_VFINT_ICR01_QUEUE_0_SHIFT 1 -#define I40E_VFINT_ICR01_QUEUE_0_MASK I40E_MASK(0x1, I40E_VFINT_ICR01_QUEUE_0_SHIFT) -#define I40E_VFINT_ICR01_QUEUE_1_SHIFT 2 -#define I40E_VFINT_ICR01_QUEUE_1_MASK I40E_MASK(0x1, I40E_VFINT_ICR01_QUEUE_1_SHIFT) -#define I40E_VFINT_ICR01_QUEUE_2_SHIFT 3 -#define I40E_VFINT_ICR01_QUEUE_2_MASK I40E_MASK(0x1, I40E_VFINT_ICR01_QUEUE_2_SHIFT) -#define I40E_VFINT_ICR01_QUEUE_3_SHIFT 4 -#define I40E_VFINT_ICR01_QUEUE_3_MASK I40E_MASK(0x1, I40E_VFINT_ICR01_QUEUE_3_SHIFT) -#define I40E_VFINT_ICR01_LINK_STAT_CHANGE_SHIFT 25 -#define I40E_VFINT_ICR01_LINK_STAT_CHANGE_MASK I40E_MASK(0x1, I40E_VFINT_ICR01_LINK_STAT_CHANGE_SHIFT) -#define I40E_VFINT_ICR01_ADMINQ_SHIFT 30 -#define I40E_VFINT_ICR01_ADMINQ_MASK I40E_MASK(0x1, I40E_VFINT_ICR01_ADMINQ_SHIFT) -#define I40E_VFINT_ICR01_SWINT_SHIFT 31 -#define I40E_VFINT_ICR01_SWINT_MASK I40E_MASK(0x1, I40E_VFINT_ICR01_SWINT_SHIFT) -#define I40E_VFINT_ITR01(_i) (0x00004C00 + ((_i) * 4)) /* _i=0...2 */ /* Reset: VFR */ -#define I40E_VFINT_ITR01_MAX_INDEX 2 -#define I40E_VFINT_ITR01_INTERVAL_SHIFT 0 -#define I40E_VFINT_ITR01_INTERVAL_MASK I40E_MASK(0xFFF, I40E_VFINT_ITR01_INTERVAL_SHIFT) #define I40E_VFINT_ITRN1(_i, _INTVF) (0x00002800 + ((_i) * 64 + (_INTVF) * 4)) /* _i=0...2, _INTVF=0...15 */ /* Reset: VFR */ -#define I40E_VFINT_ITRN1_MAX_INDEX 2 -#define I40E_VFINT_ITRN1_INTERVAL_SHIFT 0 -#define I40E_VFINT_ITRN1_INTERVAL_MASK I40E_MASK(0xFFF, I40E_VFINT_ITRN1_INTERVAL_SHIFT) -#define I40E_VFINT_STAT_CTL01 0x00005400 /* Reset: CORER */ -#define I40E_VFINT_STAT_CTL01_OTHER_ITR_INDX_SHIFT 2 -#define I40E_VFINT_STAT_CTL01_OTHER_ITR_INDX_MASK I40E_MASK(0x3, I40E_VFINT_STAT_CTL01_OTHER_ITR_INDX_SHIFT) #define I40E_QRX_TAIL1(_Q) (0x00002000 + ((_Q) * 4)) /* _i=0...15 */ /* Reset: CORER */ -#define I40E_QRX_TAIL1_MAX_INDEX 15 -#define I40E_QRX_TAIL1_TAIL_SHIFT 0 -#define I40E_QRX_TAIL1_TAIL_MASK I40E_MASK(0x1FFF, I40E_QRX_TAIL1_TAIL_SHIFT) #define I40E_QTX_TAIL1(_Q) (0x00000000 + ((_Q) * 4)) /* _i=0...15 */ /* Reset: PFR */ -#define I40E_QTX_TAIL1_MAX_INDEX 15 -#define I40E_QTX_TAIL1_TAIL_SHIFT 0 -#define I40E_QTX_TAIL1_TAIL_MASK I40E_MASK(0x1FFF, I40E_QTX_TAIL1_TAIL_SHIFT) -#define I40E_VFMSIX_PBA 0x00002000 /* Reset: VFLR */ -#define I40E_VFMSIX_PBA_PENBIT_SHIFT 0 -#define I40E_VFMSIX_PBA_PENBIT_MASK I40E_MASK(0xFFFFFFFF, I40E_VFMSIX_PBA_PENBIT_SHIFT) -#define I40E_VFMSIX_TADD(_i) (0x00000000 + ((_i) * 16)) /* _i=0...16 */ /* Reset: VFLR */ -#define I40E_VFMSIX_TADD_MAX_INDEX 16 -#define I40E_VFMSIX_TADD_MSIXTADD10_SHIFT 0 -#define I40E_VFMSIX_TADD_MSIXTADD10_MASK I40E_MASK(0x3, I40E_VFMSIX_TADD_MSIXTADD10_SHIFT) -#define I40E_VFMSIX_TADD_MSIXTADD_SHIFT 2 -#define I40E_VFMSIX_TADD_MSIXTADD_MASK I40E_MASK(0x3FFFFFFF, I40E_VFMSIX_TADD_MSIXTADD_SHIFT) -#define I40E_VFMSIX_TMSG(_i) (0x00000008 + ((_i) * 16)) /* _i=0...16 */ /* Reset: VFLR */ -#define I40E_VFMSIX_TMSG_MAX_INDEX 16 -#define I40E_VFMSIX_TMSG_MSIXTMSG_SHIFT 0 -#define I40E_VFMSIX_TMSG_MSIXTMSG_MASK I40E_MASK(0xFFFFFFFF, I40E_VFMSIX_TMSG_MSIXTMSG_SHIFT) -#define I40E_VFMSIX_TUADD(_i) (0x00000004 + ((_i) * 16)) /* _i=0...16 */ /* Reset: VFLR */ -#define I40E_VFMSIX_TUADD_MAX_INDEX 16 -#define I40E_VFMSIX_TUADD_MSIXTUADD_SHIFT 0 -#define I40E_VFMSIX_TUADD_MSIXTUADD_MASK I40E_MASK(0xFFFFFFFF, I40E_VFMSIX_TUADD_MSIXTUADD_SHIFT) -#define I40E_VFMSIX_TVCTRL(_i) (0x0000000C + ((_i) * 16)) /* _i=0...16 */ /* Reset: VFLR */ -#define I40E_VFMSIX_TVCTRL_MAX_INDEX 16 -#define I40E_VFMSIX_TVCTRL_MASK_SHIFT 0 -#define I40E_VFMSIX_TVCTRL_MASK_MASK I40E_MASK(0x1, I40E_VFMSIX_TVCTRL_MASK_SHIFT) -#define I40E_VFCM_PE_ERRDATA 0x0000DC00 /* Reset: VFR */ -#define I40E_VFCM_PE_ERRDATA_ERROR_CODE_SHIFT 0 -#define I40E_VFCM_PE_ERRDATA_ERROR_CODE_MASK I40E_MASK(0xF, I40E_VFCM_PE_ERRDATA_ERROR_CODE_SHIFT) -#define I40E_VFCM_PE_ERRDATA_Q_TYPE_SHIFT 4 -#define I40E_VFCM_PE_ERRDATA_Q_TYPE_MASK I40E_MASK(0x7, I40E_VFCM_PE_ERRDATA_Q_TYPE_SHIFT) -#define I40E_VFCM_PE_ERRDATA_Q_NUM_SHIFT 8 -#define I40E_VFCM_PE_ERRDATA_Q_NUM_MASK I40E_MASK(0x3FFFF, I40E_VFCM_PE_ERRDATA_Q_NUM_SHIFT) -#define I40E_VFCM_PE_ERRINFO 0x0000D800 /* Reset: VFR */ -#define I40E_VFCM_PE_ERRINFO_ERROR_VALID_SHIFT 0 -#define I40E_VFCM_PE_ERRINFO_ERROR_VALID_MASK I40E_MASK(0x1, I40E_VFCM_PE_ERRINFO_ERROR_VALID_SHIFT) -#define I40E_VFCM_PE_ERRINFO_ERROR_INST_SHIFT 4 -#define I40E_VFCM_PE_ERRINFO_ERROR_INST_MASK I40E_MASK(0x7, I40E_VFCM_PE_ERRINFO_ERROR_INST_SHIFT) -#define I40E_VFCM_PE_ERRINFO_DBL_ERROR_CNT_SHIFT 8 -#define I40E_VFCM_PE_ERRINFO_DBL_ERROR_CNT_MASK I40E_MASK(0xFF, I40E_VFCM_PE_ERRINFO_DBL_ERROR_CNT_SHIFT) -#define I40E_VFCM_PE_ERRINFO_RLU_ERROR_CNT_SHIFT 16 -#define I40E_VFCM_PE_ERRINFO_RLU_ERROR_CNT_MASK I40E_MASK(0xFF, I40E_VFCM_PE_ERRINFO_RLU_ERROR_CNT_SHIFT) -#define I40E_VFCM_PE_ERRINFO_RLS_ERROR_CNT_SHIFT 24 -#define I40E_VFCM_PE_ERRINFO_RLS_ERROR_CNT_MASK I40E_MASK(0xFF, I40E_VFCM_PE_ERRINFO_RLS_ERROR_CNT_SHIFT) #define I40E_VFQF_HENA(_i) (0x0000C400 + ((_i) * 4)) /* _i=0...1 */ /* Reset: CORER */ -#define I40E_VFQF_HENA_MAX_INDEX 1 -#define I40E_VFQF_HENA_PTYPE_ENA_SHIFT 0 -#define I40E_VFQF_HENA_PTYPE_ENA_MASK I40E_MASK(0xFFFFFFFF, I40E_VFQF_HENA_PTYPE_ENA_SHIFT) #define I40E_VFQF_HKEY(_i) (0x0000CC00 + ((_i) * 4)) /* _i=0...12 */ /* Reset: CORER */ #define I40E_VFQF_HKEY_MAX_INDEX 12 -#define I40E_VFQF_HKEY_KEY_0_SHIFT 0 -#define I40E_VFQF_HKEY_KEY_0_MASK I40E_MASK(0xFF, I40E_VFQF_HKEY_KEY_0_SHIFT) -#define I40E_VFQF_HKEY_KEY_1_SHIFT 8 -#define I40E_VFQF_HKEY_KEY_1_MASK I40E_MASK(0xFF, I40E_VFQF_HKEY_KEY_1_SHIFT) -#define I40E_VFQF_HKEY_KEY_2_SHIFT 16 -#define I40E_VFQF_HKEY_KEY_2_MASK I40E_MASK(0xFF, I40E_VFQF_HKEY_KEY_2_SHIFT) -#define I40E_VFQF_HKEY_KEY_3_SHIFT 24 -#define I40E_VFQF_HKEY_KEY_3_MASK I40E_MASK(0xFF, I40E_VFQF_HKEY_KEY_3_SHIFT) #define I40E_VFQF_HLUT(_i) (0x0000D000 + ((_i) * 4)) /* _i=0...15 */ /* Reset: CORER */ #define I40E_VFQF_HLUT_MAX_INDEX 15 -#define I40E_VFQF_HLUT_LUT0_SHIFT 0 -#define I40E_VFQF_HLUT_LUT0_MASK I40E_MASK(0xF, I40E_VFQF_HLUT_LUT0_SHIFT) -#define I40E_VFQF_HLUT_LUT1_SHIFT 8 -#define I40E_VFQF_HLUT_LUT1_MASK I40E_MASK(0xF, I40E_VFQF_HLUT_LUT1_SHIFT) -#define I40E_VFQF_HLUT_LUT2_SHIFT 16 -#define I40E_VFQF_HLUT_LUT2_MASK I40E_MASK(0xF, I40E_VFQF_HLUT_LUT2_SHIFT) -#define I40E_VFQF_HLUT_LUT3_SHIFT 24 -#define I40E_VFQF_HLUT_LUT3_MASK I40E_MASK(0xF, I40E_VFQF_HLUT_LUT3_SHIFT) -#define I40E_VFQF_HREGION(_i) (0x0000D400 + ((_i) * 4)) /* _i=0...7 */ /* Reset: CORER */ -#define I40E_VFQF_HREGION_MAX_INDEX 7 -#define I40E_VFQF_HREGION_OVERRIDE_ENA_0_SHIFT 0 -#define I40E_VFQF_HREGION_OVERRIDE_ENA_0_MASK I40E_MASK(0x1, I40E_VFQF_HREGION_OVERRIDE_ENA_0_SHIFT) -#define I40E_VFQF_HREGION_REGION_0_SHIFT 1 -#define I40E_VFQF_HREGION_REGION_0_MASK I40E_MASK(0x7, I40E_VFQF_HREGION_REGION_0_SHIFT) -#define I40E_VFQF_HREGION_OVERRIDE_ENA_1_SHIFT 4 -#define I40E_VFQF_HREGION_OVERRIDE_ENA_1_MASK I40E_MASK(0x1, I40E_VFQF_HREGION_OVERRIDE_ENA_1_SHIFT) -#define I40E_VFQF_HREGION_REGION_1_SHIFT 5 -#define I40E_VFQF_HREGION_REGION_1_MASK I40E_MASK(0x7, I40E_VFQF_HREGION_REGION_1_SHIFT) -#define I40E_VFQF_HREGION_OVERRIDE_ENA_2_SHIFT 8 -#define I40E_VFQF_HREGION_OVERRIDE_ENA_2_MASK I40E_MASK(0x1, I40E_VFQF_HREGION_OVERRIDE_ENA_2_SHIFT) -#define I40E_VFQF_HREGION_REGION_2_SHIFT 9 -#define I40E_VFQF_HREGION_REGION_2_MASK I40E_MASK(0x7, I40E_VFQF_HREGION_REGION_2_SHIFT) -#define I40E_VFQF_HREGION_OVERRIDE_ENA_3_SHIFT 12 -#define I40E_VFQF_HREGION_OVERRIDE_ENA_3_MASK I40E_MASK(0x1, I40E_VFQF_HREGION_OVERRIDE_ENA_3_SHIFT) -#define I40E_VFQF_HREGION_REGION_3_SHIFT 13 -#define I40E_VFQF_HREGION_REGION_3_MASK I40E_MASK(0x7, I40E_VFQF_HREGION_REGION_3_SHIFT) -#define I40E_VFQF_HREGION_OVERRIDE_ENA_4_SHIFT 16 -#define I40E_VFQF_HREGION_OVERRIDE_ENA_4_MASK I40E_MASK(0x1, I40E_VFQF_HREGION_OVERRIDE_ENA_4_SHIFT) -#define I40E_VFQF_HREGION_REGION_4_SHIFT 17 -#define I40E_VFQF_HREGION_REGION_4_MASK I40E_MASK(0x7, I40E_VFQF_HREGION_REGION_4_SHIFT) -#define I40E_VFQF_HREGION_OVERRIDE_ENA_5_SHIFT 20 -#define I40E_VFQF_HREGION_OVERRIDE_ENA_5_MASK I40E_MASK(0x1, I40E_VFQF_HREGION_OVERRIDE_ENA_5_SHIFT) -#define I40E_VFQF_HREGION_REGION_5_SHIFT 21 -#define I40E_VFQF_HREGION_REGION_5_MASK I40E_MASK(0x7, I40E_VFQF_HREGION_REGION_5_SHIFT) -#define I40E_VFQF_HREGION_OVERRIDE_ENA_6_SHIFT 24 -#define I40E_VFQF_HREGION_OVERRIDE_ENA_6_MASK I40E_MASK(0x1, I40E_VFQF_HREGION_OVERRIDE_ENA_6_SHIFT) -#define I40E_VFQF_HREGION_REGION_6_SHIFT 25 -#define I40E_VFQF_HREGION_REGION_6_MASK I40E_MASK(0x7, I40E_VFQF_HREGION_REGION_6_SHIFT) -#define I40E_VFQF_HREGION_OVERRIDE_ENA_7_SHIFT 28 -#define I40E_VFQF_HREGION_OVERRIDE_ENA_7_MASK I40E_MASK(0x1, I40E_VFQF_HREGION_OVERRIDE_ENA_7_SHIFT) -#define I40E_VFQF_HREGION_REGION_7_SHIFT 29 -#define I40E_VFQF_HREGION_REGION_7_MASK I40E_MASK(0x7, I40E_VFQF_HREGION_REGION_7_SHIFT) -#define I40E_VFINT_DYN_CTL01_WB_ON_ITR_SHIFT 30 -#define I40E_VFINT_DYN_CTL01_WB_ON_ITR_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTL01_WB_ON_ITR_SHIFT) #define I40E_VFINT_DYN_CTLN1_WB_ON_ITR_SHIFT 30 #define I40E_VFINT_DYN_CTLN1_WB_ON_ITR_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTLN1_WB_ON_ITR_SHIFT) -#define I40E_VFPE_AEQALLOC1 0x0000A400 /* Reset: VFR */ -#define I40E_VFPE_AEQALLOC1_AECOUNT_SHIFT 0 -#define I40E_VFPE_AEQALLOC1_AECOUNT_MASK I40E_MASK(0xFFFFFFFF, I40E_VFPE_AEQALLOC1_AECOUNT_SHIFT) -#define I40E_VFPE_CCQPHIGH1 0x00009800 /* Reset: VFR */ -#define I40E_VFPE_CCQPHIGH1_PECCQPHIGH_SHIFT 0 -#define I40E_VFPE_CCQPHIGH1_PECCQPHIGH_MASK I40E_MASK(0xFFFFFFFF, I40E_VFPE_CCQPHIGH1_PECCQPHIGH_SHIFT) -#define I40E_VFPE_CCQPLOW1 0x0000AC00 /* Reset: VFR */ -#define I40E_VFPE_CCQPLOW1_PECCQPLOW_SHIFT 0 -#define I40E_VFPE_CCQPLOW1_PECCQPLOW_MASK I40E_MASK(0xFFFFFFFF, I40E_VFPE_CCQPLOW1_PECCQPLOW_SHIFT) -#define I40E_VFPE_CCQPSTATUS1 0x0000B800 /* Reset: VFR */ -#define I40E_VFPE_CCQPSTATUS1_CCQP_DONE_SHIFT 0 -#define I40E_VFPE_CCQPSTATUS1_CCQP_DONE_MASK I40E_MASK(0x1, I40E_VFPE_CCQPSTATUS1_CCQP_DONE_SHIFT) -#define I40E_VFPE_CCQPSTATUS1_HMC_PROFILE_SHIFT 4 -#define I40E_VFPE_CCQPSTATUS1_HMC_PROFILE_MASK I40E_MASK(0x7, I40E_VFPE_CCQPSTATUS1_HMC_PROFILE_SHIFT) -#define I40E_VFPE_CCQPSTATUS1_RDMA_EN_VFS_SHIFT 16 -#define I40E_VFPE_CCQPSTATUS1_RDMA_EN_VFS_MASK I40E_MASK(0x3F, I40E_VFPE_CCQPSTATUS1_RDMA_EN_VFS_SHIFT) -#define I40E_VFPE_CCQPSTATUS1_CCQP_ERR_SHIFT 31 -#define I40E_VFPE_CCQPSTATUS1_CCQP_ERR_MASK I40E_MASK(0x1, I40E_VFPE_CCQPSTATUS1_CCQP_ERR_SHIFT) -#define I40E_VFPE_CQACK1 0x0000B000 /* Reset: VFR */ -#define I40E_VFPE_CQACK1_PECQID_SHIFT 0 -#define I40E_VFPE_CQACK1_PECQID_MASK I40E_MASK(0x1FFFF, I40E_VFPE_CQACK1_PECQID_SHIFT) -#define I40E_VFPE_CQARM1 0x0000B400 /* Reset: VFR */ -#define I40E_VFPE_CQARM1_PECQID_SHIFT 0 -#define I40E_VFPE_CQARM1_PECQID_MASK I40E_MASK(0x1FFFF, I40E_VFPE_CQARM1_PECQID_SHIFT) -#define I40E_VFPE_CQPDB1 0x0000BC00 /* Reset: VFR */ -#define I40E_VFPE_CQPDB1_WQHEAD_SHIFT 0 -#define I40E_VFPE_CQPDB1_WQHEAD_MASK I40E_MASK(0x7FF, I40E_VFPE_CQPDB1_WQHEAD_SHIFT) -#define I40E_VFPE_CQPERRCODES1 0x00009C00 /* Reset: VFR */ -#define I40E_VFPE_CQPERRCODES1_CQP_MINOR_CODE_SHIFT 0 -#define I40E_VFPE_CQPERRCODES1_CQP_MINOR_CODE_MASK I40E_MASK(0xFFFF, I40E_VFPE_CQPERRCODES1_CQP_MINOR_CODE_SHIFT) -#define I40E_VFPE_CQPERRCODES1_CQP_MAJOR_CODE_SHIFT 16 -#define I40E_VFPE_CQPERRCODES1_CQP_MAJOR_CODE_MASK I40E_MASK(0xFFFF, I40E_VFPE_CQPERRCODES1_CQP_MAJOR_CODE_SHIFT) -#define I40E_VFPE_CQPTAIL1 0x0000A000 /* Reset: VFR */ -#define I40E_VFPE_CQPTAIL1_WQTAIL_SHIFT 0 -#define I40E_VFPE_CQPTAIL1_WQTAIL_MASK I40E_MASK(0x7FF, I40E_VFPE_CQPTAIL1_WQTAIL_SHIFT) -#define I40E_VFPE_CQPTAIL1_CQP_OP_ERR_SHIFT 31 -#define I40E_VFPE_CQPTAIL1_CQP_OP_ERR_MASK I40E_MASK(0x1, I40E_VFPE_CQPTAIL1_CQP_OP_ERR_SHIFT) -#define I40E_VFPE_IPCONFIG01 0x00008C00 /* Reset: VFR */ -#define I40E_VFPE_IPCONFIG01_PEIPID_SHIFT 0 -#define I40E_VFPE_IPCONFIG01_PEIPID_MASK I40E_MASK(0xFFFF, I40E_VFPE_IPCONFIG01_PEIPID_SHIFT) -#define I40E_VFPE_IPCONFIG01_USEENTIREIDRANGE_SHIFT 16 -#define I40E_VFPE_IPCONFIG01_USEENTIREIDRANGE_MASK I40E_MASK(0x1, I40E_VFPE_IPCONFIG01_USEENTIREIDRANGE_SHIFT) -#define I40E_VFPE_MRTEIDXMASK1 0x00009000 /* Reset: VFR */ -#define I40E_VFPE_MRTEIDXMASK1_MRTEIDXMASKBITS_SHIFT 0 -#define I40E_VFPE_MRTEIDXMASK1_MRTEIDXMASKBITS_MASK I40E_MASK(0x1F, I40E_VFPE_MRTEIDXMASK1_MRTEIDXMASKBITS_SHIFT) -#define I40E_VFPE_RCVUNEXPECTEDERROR1 0x00009400 /* Reset: VFR */ -#define I40E_VFPE_RCVUNEXPECTEDERROR1_TCP_RX_UNEXP_ERR_SHIFT 0 -#define I40E_VFPE_RCVUNEXPECTEDERROR1_TCP_RX_UNEXP_ERR_MASK I40E_MASK(0xFFFFFF, I40E_VFPE_RCVUNEXPECTEDERROR1_TCP_RX_UNEXP_ERR_SHIFT) -#define I40E_VFPE_TCPNOWTIMER1 0x0000A800 /* Reset: VFR */ -#define I40E_VFPE_TCPNOWTIMER1_TCP_NOW_SHIFT 0 -#define I40E_VFPE_TCPNOWTIMER1_TCP_NOW_MASK I40E_MASK(0xFFFFFFFF, I40E_VFPE_TCPNOWTIMER1_TCP_NOW_SHIFT) -#define I40E_VFPE_WQEALLOC1 0x0000C000 /* Reset: VFR */ -#define I40E_VFPE_WQEALLOC1_PEQPID_SHIFT 0 -#define I40E_VFPE_WQEALLOC1_PEQPID_MASK I40E_MASK(0x3FFFF, I40E_VFPE_WQEALLOC1_PEQPID_SHIFT) -#define I40E_VFPE_WQEALLOC1_WQE_DESC_INDEX_SHIFT 20 -#define I40E_VFPE_WQEALLOC1_WQE_DESC_INDEX_MASK I40E_MASK(0xFFF, I40E_VFPE_WQEALLOC1_WQE_DESC_INDEX_SHIFT) #endif /* _I40E_REGISTER_H_ */ diff --git a/drivers/net/ethernet/intel/iavf/i40e_type.h b/drivers/net/ethernet/intel/iavf/i40e_type.h index 094387db3c110..8f1344094bc93 100644 --- a/drivers/net/ethernet/intel/iavf/i40e_type.h +++ b/drivers/net/ethernet/intel/iavf/i40e_type.h @@ -8,26 +8,16 @@ #include "i40e_osdep.h" #include "i40e_register.h" #include "i40e_adminq.h" -#include "i40e_hmc.h" -#include "i40e_lan_hmc.h" #include "i40e_devids.h"

+#define I40E_RXQ_CTX_DBUFF_SHIFT 7 + /* I40E_MASK is a macro used on 32 bit registers */ #define I40E_MASK(mask, shift) ((u32)(mask) << (shift))

#define I40E_MAX_VSI_QP 16 #define I40E_MAX_VF_VSI 3 #define I40E_MAX_CHAINED_RX_BUFFERS 5 -#define I40E_MAX_PF_UDP_OFFLOAD_PORTS 16 - -/* Max default timeout in ms, */ -#define I40E_MAX_NVM_TIMEOUT 18000 - -/* Max timeout in ms for the phy to respond */ -#define I40E_MAX_PHY_TIMEOUT 500 - -/* Switch from ms to the 1usec global time (this is the GTIME resolution) */ -#define I40E_MS_TO_GTIME(time) ((time) * 1000)

/* forward declaration */ struct i40e_hw; @@ -88,33 +78,6 @@ enum i40e_mac_type { I40E_MAC_GENERIC, };

-enum i40e_media_type { - I40E_MEDIA_TYPE_UNKNOWN = 0, - I40E_MEDIA_TYPE_FIBER, - I40E_MEDIA_TYPE_BASET, - I40E_MEDIA_TYPE_BACKPLANE, - I40E_MEDIA_TYPE_CX4, - I40E_MEDIA_TYPE_DA, - I40E_MEDIA_TYPE_VIRTUAL -}; - -enum i40e_fc_mode { - I40E_FC_NONE = 0, - I40E_FC_RX_PAUSE, - I40E_FC_TX_PAUSE, - I40E_FC_FULL, - I40E_FC_PFC, - I40E_FC_DEFAULT -}; - -enum i40e_set_fc_aq_failures { - I40E_SET_FC_AQ_FAIL_NONE = 0, - I40E_SET_FC_AQ_FAIL_GET = 1, - I40E_SET_FC_AQ_FAIL_SET = 2, - I40E_SET_FC_AQ_FAIL_UPDATE = 4, - I40E_SET_FC_AQ_FAIL_SET_UPDATE = 6 -}; - enum i40e_vsi_type { I40E_VSI_MAIN = 0, I40E_VSI_VMDQ1 = 1, @@ -134,162 +97,16 @@ enum i40e_queue_type { I40E_QUEUE_TYPE_UNKNOWN };

-struct i40e_link_status { - enum i40e_aq_phy_type phy_type; - enum i40e_aq_link_speed link_speed; - u8 link_info; - u8 an_info; - u8 req_fec_info; - u8 fec_info; - u8 ext_info; - u8 loopback; - /* is Link Status Event notification to SW enabled */ - bool lse_enable; - u16 max_frame_size; - bool crc_enable; - u8 pacing; - u8 requested_speeds; - u8 module_type[3]; - /* 1st byte: module identifier */ -#define I40E_MODULE_TYPE_SFP 0x03 -#define I40E_MODULE_TYPE_QSFP 0x0D - /* 2nd byte: ethernet compliance codes for 10/40G */ -#define I40E_MODULE_TYPE_40G_ACTIVE 0x01 -#define I40E_MODULE_TYPE_40G_LR4 0x02 -#define I40E_MODULE_TYPE_40G_SR4 0x04 -#define I40E_MODULE_TYPE_40G_CR4 0x08 -#define I40E_MODULE_TYPE_10G_BASE_SR 0x10 -#define I40E_MODULE_TYPE_10G_BASE_LR 0x20 -#define I40E_MODULE_TYPE_10G_BASE_LRM 0x40 -#define I40E_MODULE_TYPE_10G_BASE_ER 0x80 - /* 3rd byte: ethernet compliance codes for 1G */ -#define I40E_MODULE_TYPE_1000BASE_SX 0x01 -#define I40E_MODULE_TYPE_1000BASE_LX 0x02 -#define I40E_MODULE_TYPE_1000BASE_CX 0x04 -#define I40E_MODULE_TYPE_1000BASE_T 0x08 -}; - -struct i40e_phy_info { - struct i40e_link_status link_info; - struct i40e_link_status link_info_old; - bool get_link_info; - enum i40e_media_type media_type; - /* all the phy types the NVM is capable of */ - u64 phy_types; -}; - -#define I40E_CAP_PHY_TYPE_SGMII BIT_ULL(I40E_PHY_TYPE_SGMII) -#define I40E_CAP_PHY_TYPE_1000BASE_KX BIT_ULL(I40E_PHY_TYPE_1000BASE_KX) -#define I40E_CAP_PHY_TYPE_10GBASE_KX4 BIT_ULL(I40E_PHY_TYPE_10GBASE_KX4) -#define I40E_CAP_PHY_TYPE_10GBASE_KR BIT_ULL(I40E_PHY_TYPE_10GBASE_KR) -#define I40E_CAP_PHY_TYPE_40GBASE_KR4 BIT_ULL(I40E_PHY_TYPE_40GBASE_KR4) -#define I40E_CAP_PHY_TYPE_XAUI BIT_ULL(I40E_PHY_TYPE_XAUI) -#define I40E_CAP_PHY_TYPE_XFI BIT_ULL(I40E_PHY_TYPE_XFI) -#define I40E_CAP_PHY_TYPE_SFI BIT_ULL(I40E_PHY_TYPE_SFI) -#define I40E_CAP_PHY_TYPE_XLAUI BIT_ULL(I40E_PHY_TYPE_XLAUI) -#define I40E_CAP_PHY_TYPE_XLPPI BIT_ULL(I40E_PHY_TYPE_XLPPI) -#define I40E_CAP_PHY_TYPE_40GBASE_CR4_CU BIT_ULL(I40E_PHY_TYPE_40GBASE_CR4_CU) -#define I40E_CAP_PHY_TYPE_10GBASE_CR1_CU BIT_ULL(I40E_PHY_TYPE_10GBASE_CR1_CU) -#define I40E_CAP_PHY_TYPE_10GBASE_AOC BIT_ULL(I40E_PHY_TYPE_10GBASE_AOC) -#define I40E_CAP_PHY_TYPE_40GBASE_AOC BIT_ULL(I40E_PHY_TYPE_40GBASE_AOC) -#define I40E_CAP_PHY_TYPE_100BASE_TX BIT_ULL(I40E_PHY_TYPE_100BASE_TX) -#define I40E_CAP_PHY_TYPE_1000BASE_T BIT_ULL(I40E_PHY_TYPE_1000BASE_T) -#define I40E_CAP_PHY_TYPE_10GBASE_T BIT_ULL(I40E_PHY_TYPE_10GBASE_T) -#define I40E_CAP_PHY_TYPE_10GBASE_SR BIT_ULL(I40E_PHY_TYPE_10GBASE_SR) -#define I40E_CAP_PHY_TYPE_10GBASE_LR BIT_ULL(I40E_PHY_TYPE_10GBASE_LR) -#define I40E_CAP_PHY_TYPE_10GBASE_SFPP_CU BIT_ULL(I40E_PHY_TYPE_10GBASE_SFPP_CU) -#define I40E_CAP_PHY_TYPE_10GBASE_CR1 BIT_ULL(I40E_PHY_TYPE_10GBASE_CR1) -#define I40E_CAP_PHY_TYPE_40GBASE_CR4 BIT_ULL(I40E_PHY_TYPE_40GBASE_CR4) -#define I40E_CAP_PHY_TYPE_40GBASE_SR4 BIT_ULL(I40E_PHY_TYPE_40GBASE_SR4) -#define I40E_CAP_PHY_TYPE_40GBASE_LR4 BIT_ULL(I40E_PHY_TYPE_40GBASE_LR4) -#define I40E_CAP_PHY_TYPE_1000BASE_SX BIT_ULL(I40E_PHY_TYPE_1000BASE_SX) -#define I40E_CAP_PHY_TYPE_1000BASE_LX BIT_ULL(I40E_PHY_TYPE_1000BASE_LX) -#define I40E_CAP_PHY_TYPE_1000BASE_T_OPTICAL \ - BIT_ULL(I40E_PHY_TYPE_1000BASE_T_OPTICAL) -#define I40E_CAP_PHY_TYPE_20GBASE_KR2 BIT_ULL(I40E_PHY_TYPE_20GBASE_KR2) -/* Defining the macro I40E_TYPE_OFFSET to implement a bit shift for some - * PHY types. There is an unused bit (31) in the I40E_CAP_PHY_TYPE_* bit - * fields but no corresponding gap in the i40e_aq_phy_type enumeration. So, - * a shift is needed to adjust for this with values larger than 31. The - * only affected values are I40E_PHY_TYPE_25GBASE_*. - */ -#define I40E_PHY_TYPE_OFFSET 1 -#define I40E_CAP_PHY_TYPE_25GBASE_KR BIT_ULL(I40E_PHY_TYPE_25GBASE_KR + \ - I40E_PHY_TYPE_OFFSET) -#define I40E_CAP_PHY_TYPE_25GBASE_CR BIT_ULL(I40E_PHY_TYPE_25GBASE_CR + \ - I40E_PHY_TYPE_OFFSET) -#define I40E_CAP_PHY_TYPE_25GBASE_SR BIT_ULL(I40E_PHY_TYPE_25GBASE_SR + \ - I40E_PHY_TYPE_OFFSET) -#define I40E_CAP_PHY_TYPE_25GBASE_LR BIT_ULL(I40E_PHY_TYPE_25GBASE_LR + \ - I40E_PHY_TYPE_OFFSET) -#define I40E_HW_CAP_MAX_GPIO 30 +#define I40E_HW_CAP_MAX_GPIO 30 /* Capabilities of a PF or a VF or the whole device */ struct i40e_hw_capabilities { - u32 switch_mode; -#define I40E_NVM_IMAGE_TYPE_EVB 0x0 -#define I40E_NVM_IMAGE_TYPE_CLOUD 0x2 -#define I40E_NVM_IMAGE_TYPE_UDP_CLOUD 0x3 - - u32 management_mode; - u32 mng_protocols_over_mctp; -#define I40E_MNG_PROTOCOL_PLDM 0x2 -#define I40E_MNG_PROTOCOL_OEM_COMMANDS 0x4 -#define I40E_MNG_PROTOCOL_NCSI 0x8 - u32 npar_enable; - u32 os2bmc; - u32 valid_functions; - bool sr_iov_1_1; - bool vmdq; - bool evb_802_1_qbg; /* Edge Virtual Bridging */ - bool evb_802_1_qbh; /* Bridge Port Extension */ bool dcb; bool fcoe; - bool iscsi; /* Indicates iSCSI enabled */ - bool flex10_enable; - bool flex10_capable; - u32 flex10_mode; -#define I40E_FLEX10_MODE_UNKNOWN 0x0 -#define I40E_FLEX10_MODE_DCC 0x1 -#define I40E_FLEX10_MODE_DCI 0x2 - - u32 flex10_status; -#define I40E_FLEX10_STATUS_DCC_ERROR 0x1 -#define I40E_FLEX10_STATUS_VC_MODE 0x2 - - bool sec_rev_disabled; - bool update_disabled; -#define I40E_NVM_MGMT_SEC_REV_DISABLED 0x1 -#define I40E_NVM_MGMT_UPDATE_DISABLED 0x2 - - bool mgmt_cem; - bool ieee_1588; - bool iwarp; - bool fd; - u32 fd_filters_guaranteed; - u32 fd_filters_best_effort; - bool rss; - u32 rss_table_size; - u32 rss_table_entry_width; - bool led[I40E_HW_CAP_MAX_GPIO]; - bool sdp[I40E_HW_CAP_MAX_GPIO]; - u32 nvm_image_type; - u32 num_flow_director_filters; - u32 num_vfs; - u32 vf_base_id; u32 num_vsis; u32 num_rx_qp; u32 num_tx_qp; u32 base_queue; - u32 num_msix_vectors; u32 num_msix_vectors_vf; - u32 led_pin_num; - u32 sdp_pin_num; - u32 mdio_port_num; - u32 mdio_port_mode; - u8 rx_buf_chain_len; - u32 enabled_tcmap; - u32 maxtc; - u64 wr_csr_prot; };

struct i40e_mac_info { @@ -300,106 +117,6 @@ struct i40e_mac_info { u16 max_fcoeq; };

-enum i40e_aq_resources_ids { - I40E_NVM_RESOURCE_ID = 1 -}; - -enum i40e_aq_resource_access_type { - I40E_RESOURCE_READ = 1, - I40E_RESOURCE_WRITE -}; - -struct i40e_nvm_info { - u64 hw_semaphore_timeout; /* usec global time (GTIME resolution) */ - u32 timeout; /* [ms] */ - u16 sr_size; /* Shadow RAM size in words */ - bool blank_nvm_mode; /* is NVM empty (no FW present)*/ - u16 version; /* NVM package version */ - u32 eetrack; /* NVM data version */ - u32 oem_ver; /* OEM version info */ -}; - -/* definitions used in NVM update support */ - -enum i40e_nvmupd_cmd { - I40E_NVMUPD_INVALID, - I40E_NVMUPD_READ_CON, - I40E_NVMUPD_READ_SNT, - I40E_NVMUPD_READ_LCB, - I40E_NVMUPD_READ_SA, - I40E_NVMUPD_WRITE_ERA, - I40E_NVMUPD_WRITE_CON, - I40E_NVMUPD_WRITE_SNT, - I40E_NVMUPD_WRITE_LCB, - I40E_NVMUPD_WRITE_SA, - I40E_NVMUPD_CSUM_CON, - I40E_NVMUPD_CSUM_SA, - I40E_NVMUPD_CSUM_LCB, - I40E_NVMUPD_STATUS, - I40E_NVMUPD_EXEC_AQ, - I40E_NVMUPD_GET_AQ_RESULT, - I40E_NVMUPD_GET_AQ_EVENT, -}; - -enum i40e_nvmupd_state { - I40E_NVMUPD_STATE_INIT, - I40E_NVMUPD_STATE_READING, - I40E_NVMUPD_STATE_WRITING, - I40E_NVMUPD_STATE_INIT_WAIT, - I40E_NVMUPD_STATE_WRITE_WAIT, - I40E_NVMUPD_STATE_ERROR -}; - -/* nvm_access definition and its masks/shifts need to be accessible to - * application, core driver, and shared code. Where is the right file? - */ -#define I40E_NVM_READ 0xB -#define I40E_NVM_WRITE 0xC - -#define I40E_NVM_MOD_PNT_MASK 0xFF - -#define I40E_NVM_TRANS_SHIFT 8 -#define I40E_NVM_TRANS_MASK (0xf << I40E_NVM_TRANS_SHIFT) -#define I40E_NVM_PRESERVATION_FLAGS_SHIFT 12 -#define I40E_NVM_PRESERVATION_FLAGS_MASK \ - (0x3 << I40E_NVM_PRESERVATION_FLAGS_SHIFT) -#define I40E_NVM_PRESERVATION_FLAGS_SELECTED 0x01 -#define I40E_NVM_PRESERVATION_FLAGS_ALL 0x02 -#define I40E_NVM_CON 0x0 -#define I40E_NVM_SNT 0x1 -#define I40E_NVM_LCB 0x2 -#define I40E_NVM_SA (I40E_NVM_SNT | I40E_NVM_LCB) -#define I40E_NVM_ERA 0x4 -#define I40E_NVM_CSUM 0x8 -#define I40E_NVM_AQE 0xe -#define I40E_NVM_EXEC 0xf - -#define I40E_NVM_ADAPT_SHIFT 16 -#define I40E_NVM_ADAPT_MASK (0xffff << I40E_NVM_ADAPT_SHIFT) - -#define I40E_NVMUPD_MAX_DATA 4096 -#define I40E_NVMUPD_IFACE_TIMEOUT 2 /* seconds */ - -struct i40e_nvm_access { - u32 command; - u32 config; - u32 offset; /* in bytes */ - u32 data_size; /* in bytes */ - u8 data[1]; -}; - -/* (Q)SFP module access definitions */ -#define I40E_I2C_EEPROM_DEV_ADDR 0xA0 -#define I40E_I2C_EEPROM_DEV_ADDR2 0xA2 -#define I40E_MODULE_TYPE_ADDR 0x00 -#define I40E_MODULE_REVISION_ADDR 0x01 -#define I40E_MODULE_SFF_8472_COMP 0x5E -#define I40E_MODULE_SFF_8472_SWAP 0x5C -#define I40E_MODULE_SFF_ADDR_MODE 0x04 -#define I40E_MODULE_TYPE_QSFP_PLUS 0x0D -#define I40E_MODULE_TYPE_QSFP28 0x11 -#define I40E_MODULE_QSFP_MAX_LEN 640 - /* PCI bus types */ enum i40e_bus_type { i40e_bus_type_unknown = 0, @@ -447,69 +164,16 @@ struct i40e_bus_info { u16 bus_id; };

-/* Flow control (FC) parameters */ -struct i40e_fc_info { - enum i40e_fc_mode current_mode; /* FC mode in effect */ - enum i40e_fc_mode requested_mode; /* FC mode requested by caller */ -}; - #define I40E_MAX_TRAFFIC_CLASS 8 #define I40E_MAX_USER_PRIORITY 8 -#define I40E_DCBX_MAX_APPS 32 -#define I40E_LLDPDU_SIZE 1500 - -/* IEEE 802.1Qaz ETS Configuration data */ -struct i40e_ieee_ets_config { - u8 willing; - u8 cbs; - u8 maxtcs; - u8 prioritytable[I40E_MAX_TRAFFIC_CLASS]; - u8 tcbwtable[I40E_MAX_TRAFFIC_CLASS]; - u8 tsatable[I40E_MAX_TRAFFIC_CLASS]; -}; - -/* IEEE 802.1Qaz ETS Recommendation data */ -struct i40e_ieee_ets_recommend { - u8 prioritytable[I40E_MAX_TRAFFIC_CLASS]; - u8 tcbwtable[I40E_MAX_TRAFFIC_CLASS]; - u8 tsatable[I40E_MAX_TRAFFIC_CLASS]; -}; - -/* IEEE 802.1Qaz PFC Configuration data */ -struct i40e_ieee_pfc_config { - u8 willing; - u8 mbc; - u8 pfccap; - u8 pfcenable; -}; - -/* IEEE 802.1Qaz Application Priority data */ -struct i40e_ieee_app_priority_table { - u8 priority; - u8 selector; - u16 protocolid; -}; - -struct i40e_dcbx_config { - u32 numapps; - u32 tlv_status; /* CEE mode TLV status */ - struct i40e_ieee_ets_config etscfg; - struct i40e_ieee_ets_recommend etsrec; - struct i40e_ieee_pfc_config pfc; - struct i40e_ieee_app_priority_table app[I40E_DCBX_MAX_APPS]; -}; - /* Port hardware description */ struct i40e_hw { u8 __iomem *hw_addr; void *back;

/* subsystem structs */ - struct i40e_phy_info phy; struct i40e_mac_info mac; struct i40e_bus_info bus; - struct i40e_nvm_info nvm; - struct i40e_fc_info fc;

/* pci info */ u16 device_id; @@ -517,58 +181,13 @@ struct i40e_hw { u16 subsystem_device_id; u16 subsystem_vendor_id; u8 revision_id; - u8 port; - bool adapter_stopped;

/* capabilities for entire device and PCI func */ struct i40e_hw_capabilities dev_caps; - struct i40e_hw_capabilities func_caps; - - /* Flow Director shared filter space */ - u16 fdir_shared_filter_count; - - /* device profile info */ - u8 pf_id; - u16 main_vsi_seid; - - /* for multi-function MACs */ - u16 partition_id; - u16 num_partitions; - u16 num_ports; - - /* Closest numa node to the device */ - u16 numa_node;

/* Admin Queue info */ struct i40e_adminq_info aq;

- /* state of nvm update process */ - enum i40e_nvmupd_state nvmupd_state; - struct i40e_aq_desc nvm_wb_desc; - struct i40e_aq_desc nvm_aq_event_desc; - struct i40e_virt_mem nvm_buff; - bool nvm_release_on_done; - u16 nvm_wait_opcode; - - /* HMC info */ - struct i40e_hmc_info hmc; /* HMC info struct */ - - /* LLDP/DCBX Status */ - u16 dcbx_status; - -#define I40E_HW_FLAG_802_1AD_CAPABLE BIT_ULL(1) -#define I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE BIT_ULL(2) - - /* DCBX info */ - struct i40e_dcbx_config local_dcbx_config; /* Oper/Local Cfg */ - struct i40e_dcbx_config remote_dcbx_config; /* Peer Cfg */ - struct i40e_dcbx_config desired_dcbx_config; /* CEE Desired Cfg */ - - /* Used in set switch config AQ command */ - u16 switch_tag; - u16 first_tag; - u16 second_tag; - /* debug mask */ u32 debug_mask; char err_str[16]; @@ -962,9 +581,6 @@ struct i40e_tx_context_desc { __le64 type_cmd_tso_mss; };

-#define I40E_TXD_CTX_QW1_DTYPE_SHIFT 0 -#define I40E_TXD_CTX_QW1_DTYPE_MASK (0xFUL << I40E_TXD_CTX_QW1_DTYPE_SHIFT) - #define I40E_TXD_CTX_QW1_CMD_SHIFT 4 #define I40E_TXD_CTX_QW1_CMD_MASK (0xFFFFUL << I40E_TXD_CTX_QW1_CMD_SHIFT)

@@ -1028,21 +644,6 @@ enum i40e_tx_ctx_desc_eipt_offload {

#define I40E_TXD_CTX_QW0_L4T_CS_SHIFT 23 #define I40E_TXD_CTX_QW0_L4T_CS_MASK BIT_ULL(I40E_TXD_CTX_QW0_L4T_CS_SHIFT) -struct i40e_filter_program_desc { - __le32 qindex_flex_ptype_vsi; - __le32 rsvd; - __le32 dtype_cmd_cntindex; - __le32 fd_id; -}; -#define I40E_TXD_FLTR_QW0_QINDEX_SHIFT 0 -#define I40E_TXD_FLTR_QW0_QINDEX_MASK (0x7FFUL << \ - I40E_TXD_FLTR_QW0_QINDEX_SHIFT) -#define I40E_TXD_FLTR_QW0_FLEXOFF_SHIFT 11 -#define I40E_TXD_FLTR_QW0_FLEXOFF_MASK (0x7UL << \ - I40E_TXD_FLTR_QW0_FLEXOFF_SHIFT) -#define I40E_TXD_FLTR_QW0_PCTYPE_SHIFT 17 -#define I40E_TXD_FLTR_QW0_PCTYPE_MASK (0x3FUL << \ - I40E_TXD_FLTR_QW0_PCTYPE_SHIFT)

/* Packet Classifier Types for filters */ enum i40e_filter_pctype { @@ -1076,58 +677,6 @@ enum i40e_filter_pctype { I40E_FILTER_PCTYPE_L2_PAYLOAD = 63, };

-enum i40e_filter_program_desc_dest { - I40E_FILTER_PROGRAM_DESC_DEST_DROP_PACKET = 0x0, - I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX = 0x1, - I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_OTHER = 0x2, -}; - -enum i40e_filter_program_desc_fd_status { - I40E_FILTER_PROGRAM_DESC_FD_STATUS_NONE = 0x0, - I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID = 0x1, - I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID_4FLEX_BYTES = 0x2, - I40E_FILTER_PROGRAM_DESC_FD_STATUS_8FLEX_BYTES = 0x3, -}; - -#define I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT 23 -#define I40E_TXD_FLTR_QW0_DEST_VSI_MASK (0x1FFUL << \ - I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT) - -#define I40E_TXD_FLTR_QW1_CMD_SHIFT 4 -#define I40E_TXD_FLTR_QW1_CMD_MASK (0xFFFFULL << \ - I40E_TXD_FLTR_QW1_CMD_SHIFT) - -#define I40E_TXD_FLTR_QW1_PCMD_SHIFT (0x0ULL + I40E_TXD_FLTR_QW1_CMD_SHIFT) -#define I40E_TXD_FLTR_QW1_PCMD_MASK (0x7ULL << I40E_TXD_FLTR_QW1_PCMD_SHIFT) - -enum i40e_filter_program_desc_pcmd { - I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE = 0x1, - I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE = 0x2, -}; - -#define I40E_TXD_FLTR_QW1_DEST_SHIFT (0x3ULL + I40E_TXD_FLTR_QW1_CMD_SHIFT) -#define I40E_TXD_FLTR_QW1_DEST_MASK (0x3ULL << I40E_TXD_FLTR_QW1_DEST_SHIFT) - -#define I40E_TXD_FLTR_QW1_CNT_ENA_SHIFT (0x7ULL + I40E_TXD_FLTR_QW1_CMD_SHIFT) -#define I40E_TXD_FLTR_QW1_CNT_ENA_MASK BIT_ULL(I40E_TXD_FLTR_QW1_CNT_ENA_SHIFT) - -#define I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT (0x9ULL + \ - I40E_TXD_FLTR_QW1_CMD_SHIFT) -#define I40E_TXD_FLTR_QW1_FD_STATUS_MASK (0x3ULL << \ - I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT) - -#define I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT 20 -#define I40E_TXD_FLTR_QW1_CNTINDEX_MASK (0x1FFUL << \ - I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) - -enum i40e_filter_type { - I40E_FLOW_DIRECTOR_FLTR = 0, - I40E_PE_QUAD_HASH_FLTR = 1, - I40E_ETHERTYPE_FLTR, - I40E_FCOE_CTX_FLTR, - I40E_MAC_VLAN_FLTR, - I40E_HASH_FLTR -};

struct i40e_vsi_context { u16 seid; @@ -1167,330 +716,4 @@ struct i40e_eth_stats { u64 tx_discards; /* tdpc */ u64 tx_errors; /* tepc */ }; - -/* Statistics collected per VEB per TC */ -struct i40e_veb_tc_stats { - u64 tc_rx_packets[I40E_MAX_TRAFFIC_CLASS]; - u64 tc_rx_bytes[I40E_MAX_TRAFFIC_CLASS]; - u64 tc_tx_packets[I40E_MAX_TRAFFIC_CLASS]; - u64 tc_tx_bytes[I40E_MAX_TRAFFIC_CLASS]; -}; - -/* Statistics collected by the MAC */ -struct i40e_hw_port_stats { - /* eth stats collected by the port */ - struct i40e_eth_stats eth; - - /* additional port specific stats */ - u64 tx_dropped_link_down; /* tdold */ - u64 crc_errors; /* crcerrs */ - u64 illegal_bytes; /* illerrc */ - u64 error_bytes; /* errbc */ - u64 mac_local_faults; /* mlfc */ - u64 mac_remote_faults; /* mrfc */ - u64 rx_length_errors; /* rlec */ - u64 link_xon_rx; /* lxonrxc */ - u64 link_xoff_rx; /* lxoffrxc */ - u64 priority_xon_rx[8]; /* pxonrxc[8] */ - u64 priority_xoff_rx[8]; /* pxoffrxc[8] */ - u64 link_xon_tx; /* lxontxc */ - u64 link_xoff_tx; /* lxofftxc */ - u64 priority_xon_tx[8]; /* pxontxc[8] */ - u64 priority_xoff_tx[8]; /* pxofftxc[8] */ - u64 priority_xon_2_xoff[8]; /* pxon2offc[8] */ - u64 rx_size_64; /* prc64 */ - u64 rx_size_127; /* prc127 */ - u64 rx_size_255; /* prc255 */ - u64 rx_size_511; /* prc511 */ - u64 rx_size_1023; /* prc1023 */ - u64 rx_size_1522; /* prc1522 */ - u64 rx_size_big; /* prc9522 */ - u64 rx_undersize; /* ruc */ - u64 rx_fragments; /* rfc */ - u64 rx_oversize; /* roc */ - u64 rx_jabber; /* rjc */ - u64 tx_size_64; /* ptc64 */ - u64 tx_size_127; /* ptc127 */ - u64 tx_size_255; /* ptc255 */ - u64 tx_size_511; /* ptc511 */ - u64 tx_size_1023; /* ptc1023 */ - u64 tx_size_1522; /* ptc1522 */ - u64 tx_size_big; /* ptc9522 */ - u64 mac_short_packet_dropped; /* mspdc */ - u64 checksum_error; /* xec */ - /* flow director stats */ - u64 fd_atr_match; - u64 fd_sb_match; - u64 fd_atr_tunnel_match; - u32 fd_atr_status; - u32 fd_sb_status; - /* EEE LPI */ - u32 tx_lpi_status; - u32 rx_lpi_status; - u64 tx_lpi_count; /* etlpic */ - u64 rx_lpi_count; /* erlpic */ -}; - -/* Checksum and Shadow RAM pointers */ -#define I40E_SR_NVM_CONTROL_WORD 0x00 -#define I40E_EMP_MODULE_PTR 0x0F -#define I40E_SR_EMP_MODULE_PTR 0x48 -#define I40E_NVM_OEM_VER_OFF 0x83 -#define I40E_SR_NVM_DEV_STARTER_VERSION 0x18 -#define I40E_SR_NVM_WAKE_ON_LAN 0x19 -#define I40E_SR_ALTERNATE_SAN_MAC_ADDRESS_PTR 0x27 -#define I40E_SR_NVM_EETRACK_LO 0x2D -#define I40E_SR_NVM_EETRACK_HI 0x2E -#define I40E_SR_VPD_PTR 0x2F -#define I40E_SR_PCIE_ALT_AUTO_LOAD_PTR 0x3E -#define I40E_SR_SW_CHECKSUM_WORD 0x3F - -/* Auxiliary field, mask and shift definition for Shadow RAM and NVM Flash */ -#define I40E_SR_VPD_MODULE_MAX_SIZE 1024 -#define I40E_SR_PCIE_ALT_MODULE_MAX_SIZE 1024 -#define I40E_SR_CONTROL_WORD_1_SHIFT 0x06 -#define I40E_SR_CONTROL_WORD_1_MASK (0x03 << I40E_SR_CONTROL_WORD_1_SHIFT) -#define I40E_SR_CONTROL_WORD_1_NVM_BANK_VALID BIT(5) -#define I40E_SR_NVM_MAP_STRUCTURE_TYPE BIT(12) -#define I40E_PTR_TYPE BIT(15) - -/* Shadow RAM related */ -#define I40E_SR_SECTOR_SIZE_IN_WORDS 0x800 -#define I40E_SR_WORDS_IN_1KB 512 -/* Checksum should be calculated such that after adding all the words, - * including the checksum word itself, the sum should be 0xBABA. - */ -#define I40E_SR_SW_CHECKSUM_BASE 0xBABA - -#define I40E_SRRD_SRCTL_ATTEMPTS 100000 - -enum i40e_switch_element_types { - I40E_SWITCH_ELEMENT_TYPE_MAC = 1, - I40E_SWITCH_ELEMENT_TYPE_PF = 2, - I40E_SWITCH_ELEMENT_TYPE_VF = 3, - I40E_SWITCH_ELEMENT_TYPE_EMP = 4, - I40E_SWITCH_ELEMENT_TYPE_BMC = 6, - I40E_SWITCH_ELEMENT_TYPE_PE = 16, - I40E_SWITCH_ELEMENT_TYPE_VEB = 17, - I40E_SWITCH_ELEMENT_TYPE_PA = 18, - I40E_SWITCH_ELEMENT_TYPE_VSI = 19, -}; - -/* Supported EtherType filters */ -enum i40e_ether_type_index { - I40E_ETHER_TYPE_1588 = 0, - I40E_ETHER_TYPE_FIP = 1, - I40E_ETHER_TYPE_OUI_EXTENDED = 2, - I40E_ETHER_TYPE_MAC_CONTROL = 3, - I40E_ETHER_TYPE_LLDP = 4, - I40E_ETHER_TYPE_EVB_PROTOCOL1 = 5, - I40E_ETHER_TYPE_EVB_PROTOCOL2 = 6, - I40E_ETHER_TYPE_QCN_CNM = 7, - I40E_ETHER_TYPE_8021X = 8, - I40E_ETHER_TYPE_ARP = 9, - I40E_ETHER_TYPE_RSV1 = 10, - I40E_ETHER_TYPE_RSV2 = 11, -}; - -/* Filter context base size is 1K */ -#define I40E_HASH_FILTER_BASE_SIZE 1024 -/* Supported Hash filter values */ -enum i40e_hash_filter_size { - I40E_HASH_FILTER_SIZE_1K = 0, - I40E_HASH_FILTER_SIZE_2K = 1, - I40E_HASH_FILTER_SIZE_4K = 2, - I40E_HASH_FILTER_SIZE_8K = 3, - I40E_HASH_FILTER_SIZE_16K = 4, - I40E_HASH_FILTER_SIZE_32K = 5, - I40E_HASH_FILTER_SIZE_64K = 6, - I40E_HASH_FILTER_SIZE_128K = 7, - I40E_HASH_FILTER_SIZE_256K = 8, - I40E_HASH_FILTER_SIZE_512K = 9, - I40E_HASH_FILTER_SIZE_1M = 10, -}; - -/* DMA context base size is 0.5K */ -#define I40E_DMA_CNTX_BASE_SIZE 512 -/* Supported DMA context values */ -enum i40e_dma_cntx_size { - I40E_DMA_CNTX_SIZE_512 = 0, - I40E_DMA_CNTX_SIZE_1K = 1, - I40E_DMA_CNTX_SIZE_2K = 2, - I40E_DMA_CNTX_SIZE_4K = 3, - I40E_DMA_CNTX_SIZE_8K = 4, - I40E_DMA_CNTX_SIZE_16K = 5, - I40E_DMA_CNTX_SIZE_32K = 6, - I40E_DMA_CNTX_SIZE_64K = 7, - I40E_DMA_CNTX_SIZE_128K = 8, - I40E_DMA_CNTX_SIZE_256K = 9, -}; - -/* Supported Hash look up table (LUT) sizes */ -enum i40e_hash_lut_size { - I40E_HASH_LUT_SIZE_128 = 0, - I40E_HASH_LUT_SIZE_512 = 1, -}; - -/* Structure to hold a per PF filter control settings */ -struct i40e_filter_control_settings { - /* number of PE Quad Hash filter buckets */ - enum i40e_hash_filter_size pe_filt_num; - /* number of PE Quad Hash contexts */ - enum i40e_dma_cntx_size pe_cntx_num; - /* number of FCoE filter buckets */ - enum i40e_hash_filter_size fcoe_filt_num; - /* number of FCoE DDP contexts */ - enum i40e_dma_cntx_size fcoe_cntx_num; - /* size of the Hash LUT */ - enum i40e_hash_lut_size hash_lut_size; - /* enable FDIR filters for PF and its VFs */ - bool enable_fdir; - /* enable Ethertype filters for PF and its VFs */ - bool enable_ethtype; - /* enable MAC/VLAN filters for PF and its VFs */ - bool enable_macvlan; -}; - -/* Structure to hold device level control filter counts */ -struct i40e_control_filter_stats { - u16 mac_etype_used; /* Used perfect match MAC/EtherType filters */ - u16 etype_used; /* Used perfect EtherType filters */ - u16 mac_etype_free; /* Un-used perfect match MAC/EtherType filters */ - u16 etype_free; /* Un-used perfect EtherType filters */ -}; - -enum i40e_reset_type { - I40E_RESET_POR = 0, - I40E_RESET_CORER = 1, - I40E_RESET_GLOBR = 2, - I40E_RESET_EMPR = 3, -}; - -/* IEEE 802.1AB LLDP Agent Variables from NVM */ -#define I40E_NVM_LLDP_CFG_PTR 0x06 -#define I40E_SR_LLDP_CFG_PTR 0x31 - -/* RSS Hash Table Size */ -#define I40E_PFQF_CTL_0_HASHLUTSIZE_512 0x00010000 - -/* INPUT SET MASK for RSS, flow director and flexible payload */ -#define I40E_FD_INSET_L3_SRC_SHIFT 47 -#define I40E_FD_INSET_L3_SRC_WORD_MASK (0x3ULL << \ - I40E_FD_INSET_L3_SRC_SHIFT) -#define I40E_FD_INSET_L3_DST_SHIFT 35 -#define I40E_FD_INSET_L3_DST_WORD_MASK (0x3ULL << \ - I40E_FD_INSET_L3_DST_SHIFT) -#define I40E_FD_INSET_L4_SRC_SHIFT 34 -#define I40E_FD_INSET_L4_SRC_WORD_MASK (0x1ULL << \ - I40E_FD_INSET_L4_SRC_SHIFT) -#define I40E_FD_INSET_L4_DST_SHIFT 33 -#define I40E_FD_INSET_L4_DST_WORD_MASK (0x1ULL << \ - I40E_FD_INSET_L4_DST_SHIFT) -#define I40E_FD_INSET_VERIFY_TAG_SHIFT 31 -#define I40E_FD_INSET_VERIFY_TAG_WORD_MASK (0x3ULL << \ - I40E_FD_INSET_VERIFY_TAG_SHIFT) - -#define I40E_FD_INSET_FLEX_WORD50_SHIFT 17 -#define I40E_FD_INSET_FLEX_WORD50_MASK (0x1ULL << \ - I40E_FD_INSET_FLEX_WORD50_SHIFT) -#define I40E_FD_INSET_FLEX_WORD51_SHIFT 16 -#define I40E_FD_INSET_FLEX_WORD51_MASK (0x1ULL << \ - I40E_FD_INSET_FLEX_WORD51_SHIFT) -#define I40E_FD_INSET_FLEX_WORD52_SHIFT 15 -#define I40E_FD_INSET_FLEX_WORD52_MASK (0x1ULL << \ - I40E_FD_INSET_FLEX_WORD52_SHIFT) -#define I40E_FD_INSET_FLEX_WORD53_SHIFT 14 -#define I40E_FD_INSET_FLEX_WORD53_MASK (0x1ULL << \ - I40E_FD_INSET_FLEX_WORD53_SHIFT) -#define I40E_FD_INSET_FLEX_WORD54_SHIFT 13 -#define I40E_FD_INSET_FLEX_WORD54_MASK (0x1ULL << \ - I40E_FD_INSET_FLEX_WORD54_SHIFT) -#define I40E_FD_INSET_FLEX_WORD55_SHIFT 12 -#define I40E_FD_INSET_FLEX_WORD55_MASK (0x1ULL << \ - I40E_FD_INSET_FLEX_WORD55_SHIFT) -#define I40E_FD_INSET_FLEX_WORD56_SHIFT 11 -#define I40E_FD_INSET_FLEX_WORD56_MASK (0x1ULL << \ - I40E_FD_INSET_FLEX_WORD56_SHIFT) -#define I40E_FD_INSET_FLEX_WORD57_SHIFT 10 -#define I40E_FD_INSET_FLEX_WORD57_MASK (0x1ULL << \ - I40E_FD_INSET_FLEX_WORD57_SHIFT) - -/* Version format for Dynamic Device Personalization(DDP) */ -struct i40e_ddp_version { - u8 major; - u8 minor; - u8 update; - u8 draft; -}; - -#define I40E_DDP_NAME_SIZE 32 - -/* Package header */ -struct i40e_package_header { - struct i40e_ddp_version version; - u32 segment_count; - u32 segment_offset[1]; -}; - -/* Generic segment header */ -struct i40e_generic_seg_header { -#define SEGMENT_TYPE_METADATA 0x00000001 -#define SEGMENT_TYPE_NOTES 0x00000002 -#define SEGMENT_TYPE_I40E 0x00000011 -#define SEGMENT_TYPE_X722 0x00000012 - u32 type; - struct i40e_ddp_version version; - u32 size; - char name[I40E_DDP_NAME_SIZE]; -}; - -struct i40e_metadata_segment { - struct i40e_generic_seg_header header; - struct i40e_ddp_version version; - u32 track_id; - char name[I40E_DDP_NAME_SIZE]; -}; - -struct i40e_device_id_entry { - u32 vendor_dev_id; - u32 sub_vendor_dev_id; -}; - -struct i40e_profile_segment { - struct i40e_generic_seg_header header; - struct i40e_ddp_version version; - char name[I40E_DDP_NAME_SIZE]; - u32 device_table_count; - struct i40e_device_id_entry device_table[1]; -}; - -struct i40e_section_table { - u32 section_count; - u32 section_offset[1]; -}; - -struct i40e_profile_section_header { - u16 tbl_size; - u16 data_end; - struct { -#define SECTION_TYPE_INFO 0x00000010 -#define SECTION_TYPE_MMIO 0x00000800 -#define SECTION_TYPE_AQ 0x00000801 -#define SECTION_TYPE_NOTE 0x80000000 -#define SECTION_TYPE_NAME 0x80000001 - u32 type; - u32 offset; - u32 size; - } section; -}; - -struct i40e_profile_info { - u32 track_id; - struct i40e_ddp_version version; - u8 op; -#define I40E_DDP_ADD_TRACKID 0x01 -#define I40E_DDP_REMOVE_TRACKID 0x02 - u8 reserved[7]; - u8 name[I40E_DDP_NAME_SIZE]; -}; #endif /* _I40E_TYPE_H_ */

From: Gaosheng Cui cuigaosheng1@huawei.com

[ Upstream commit 85eb39bb39cbb5c086df1e19ba67cc1366693a77 ]

In igbvf_request_msix(), irqs have not been freed on the err path, we need to free it. Fix it.

Fixes: d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions") Signed-off-by: Gaosheng Cui cuigaosheng1@huawei.com Reviewed-by: Maciej Fijalkowski maciej.fijalkowski@intel.com Tested-by: Marek Szlosek marek.szlosek@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/igbvf/netdev.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index df827c2541628..70f5f28bfd9ed 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -1070,7 +1070,7 @@ static int igbvf_request_msix(struct igbvf_adapter *adapter) igbvf_intr_msix_rx, 0, adapter->rx_ring->name, netdev); if (err) - goto out; + goto free_irq_tx;

adapter->rx_ring->itr_register = E1000_EITR(vector); adapter->rx_ring->itr_val = adapter->current_itr; @@ -1079,10 +1079,14 @@ static int igbvf_request_msix(struct igbvf_adapter *adapter) err = request_irq(adapter->msix_entries[vector].vector, igbvf_msix_other, 0, netdev->name, netdev); if (err) - goto out; + goto free_irq_rx;

igbvf_configure_msix(adapter); return 0; +free_irq_rx: + free_irq(adapter->msix_entries[--vector].vector, netdev); +free_irq_tx: + free_irq(adapter->msix_entries[--vector].vector, netdev); out: return err; }

From: Alexander Stein alexander.stein@ew.tq-group.com

[ Upstream commit 1c7885004567e8951d65a983be095f254dd20bef ]

When reading from I2C, the Tx watermark is set to 0. Unfortunately the TDF (transmit data flag) is enabled when Tx FIFO entries is equal or less than watermark. So it is set in every case, hence the reset default of 1. This results in the MSR_RDF _and_ MSR_TDF flags to be set thus trying to send Tx data on a read message. Mask the IRQ status to filter for wanted flags only.

Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver") Signed-off-by: Alexander Stein alexander.stein@ew.tq-group.com Tested-by: Emanuele Ghidoli emanuele.ghidoli@toradex.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-imx-lpi2c.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c index 06c4c767af322..90c510d166516 100644 --- a/drivers/i2c/busses/i2c-imx-lpi2c.c +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c @@ -508,10 +508,14 @@ static int lpi2c_imx_xfer(struct i2c_adapter *adapter, static irqreturn_t lpi2c_imx_isr(int irq, void *dev_id) { struct lpi2c_imx_struct *lpi2c_imx = dev_id; + unsigned int enabled; unsigned int temp;

+ enabled = readl(lpi2c_imx->base + LPI2C_MIER); + lpi2c_imx_intctrl(lpi2c_imx, 0); temp = readl(lpi2c_imx->base + LPI2C_MSR); + temp &= enabled;

if (temp & MSR_RDF) lpi2c_imx_read_rxfifo(lpi2c_imx);

From: Szymon Heidrich szymon.heidrich@gmail.com

[ Upstream commit ff821092cf02a70c2bccd2d19269f01e29aa52cf ]

Packet length retrieved from descriptor may be larger than the actual socket buffer length. In such case the cloned skb passed up the network stack will leak kernel memory contents.

Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by: Szymon Heidrich szymon.heidrich@gmail.com Reviewed-by: Jakub Kicinski kuba@kernel.org Link: https://lore.kernel.org/r/20230316101954.75836-1-szymon.heidrich@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/smsc95xx.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 4f29010e1aeff..0850486864135 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1950,6 +1950,12 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb) size = (u16)((header & RX_STS_FL_) >> 16); align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4;

+ if (unlikely(size > skb->len)) { + netif_dbg(dev, rx_err, dev->net, + "size err header=0x%08x\n", header); + return 0; + } + if (unlikely(header & RX_STS_ES_)) { netif_dbg(dev, rx_err, dev->net, "Error header=0x%08x\n", header);

From: Zheng Wang zyytlz.wz@163.com

[ Upstream commit e8d20c3ded59a092532513c9bd030d1ea66f5f44 ]

In xirc2ps_probe, the local->tx_timeout_task was bounded with xirc2ps_tx_timeout_task. When timeout occurs, it will call xirc_tx_timeout->schedule_work to start the work.

When we call xirc2ps_detach to remove the driver, there may be a sequence as follows:

Stop responding to timeout tasks and complete scheduled tasks before cleanup in xirc2ps_detach, which will fix the problem.

CPU0 CPU1

|xirc2ps_tx_timeout_task xirc2ps_detach | free_netdev | kfree(dev); | | | do_reset | //use dev

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zheng Wang zyytlz.wz@163.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/xircom/xirc2ps_cs.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/xircom/xirc2ps_cs.c b/drivers/net/ethernet/xircom/xirc2ps_cs.c index fd5288ff53b53..e3438cef5f9c6 100644 --- a/drivers/net/ethernet/xircom/xirc2ps_cs.c +++ b/drivers/net/ethernet/xircom/xirc2ps_cs.c @@ -503,6 +503,11 @@ static void xirc2ps_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; + struct local_info *local = netdev_priv(dev); + + netif_carrier_off(dev); + netif_tx_disable(dev); + cancel_work_sync(&local->tx_timeout_task);

dev_dbg(&link->dev, "detach\n");

From: Geoff Levand geoff@infradead.org

[ Upstream commit 19b3bb51c3bc288b3f2c6f8c4450b0f548320625 ]

The Gelic Ethernet device needs to have the RX sk_buffs aligned to GELIC_NET_RXBUF_ALIGN, and also the length of the RX sk_buffs must be a multiple of GELIC_NET_RXBUF_ALIGN.

The current Gelic Ethernet driver was not allocating sk_buffs large enough to allow for this alignment.

Also, correct the maximum and minimum MTU sizes, and add a new preprocessor macro for the maximum frame size, GELIC_NET_MAX_FRAME.

Fixes various randomly occurring runtime network errors.

Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3") Signed-off-by: Geoff Levand geoff@infradead.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/toshiba/ps3_gelic_net.c | 19 ++++++++++--------- drivers/net/ethernet/toshiba/ps3_gelic_net.h | 5 +++-- 2 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c index 75237c81c63d6..67f61379ba672 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c +++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c @@ -378,28 +378,29 @@ static int gelic_card_init_chain(struct gelic_card *card, * * allocates a new rx skb, iommu-maps it and attaches it to the descriptor. * Activate the descriptor state-wise + * + * Gelic RX sk_buffs must be aligned to GELIC_NET_RXBUF_ALIGN and the length + * must be a multiple of GELIC_NET_RXBUF_ALIGN. */ static int gelic_descr_prepare_rx(struct gelic_card *card, struct gelic_descr *descr) { + static const unsigned int rx_skb_size = + ALIGN(GELIC_NET_MAX_FRAME, GELIC_NET_RXBUF_ALIGN) + + GELIC_NET_RXBUF_ALIGN - 1; int offset; - unsigned int bufsize;

if (gelic_descr_get_status(descr) != GELIC_DESCR_DMA_NOT_IN_USE) dev_info(ctodev(card), "%s: ERROR status\n", __func__); - /* we need to round up the buffer size to a multiple of 128 */ - bufsize = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN);

- /* and we need to have it 128 byte aligned, therefore we allocate a - * bit more */ - descr->skb = dev_alloc_skb(bufsize + GELIC_NET_RXBUF_ALIGN - 1); + descr->skb = netdev_alloc_skb(*card->netdev, rx_skb_size); if (!descr->skb) { descr->buf_addr = 0; /* tell DMAC don't touch memory */ dev_info(ctodev(card), "%s:allocate skb failed !!\n", __func__); return -ENOMEM; } - descr->buf_size = cpu_to_be32(bufsize); + descr->buf_size = cpu_to_be32(rx_skb_size); descr->dmac_cmd_status = 0; descr->result_size = 0; descr->valid_size = 0; @@ -412,7 +413,7 @@ static int gelic_descr_prepare_rx(struct gelic_card *card, /* io-mmu-map the skb */ descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card), descr->skb->data, - GELIC_NET_MAX_MTU, + GELIC_NET_MAX_FRAME, DMA_FROM_DEVICE)); if (!descr->buf_addr) { dev_kfree_skb_any(descr->skb); @@ -930,7 +931,7 @@ static void gelic_net_pass_skb_up(struct gelic_descr *descr, data_error = be32_to_cpu(descr->data_error); /* unmap skb buffer */ dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr), - GELIC_NET_MAX_MTU, + GELIC_NET_MAX_FRAME, DMA_FROM_DEVICE);

skb_put(skb, be32_to_cpu(descr->valid_size)? diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.h b/drivers/net/ethernet/toshiba/ps3_gelic_net.h index fbbf9b54b173b..0e592fc19f6c5 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_net.h +++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.h @@ -32,8 +32,9 @@ #define GELIC_NET_RX_DESCRIPTORS 128 /* num of descriptors */ #define GELIC_NET_TX_DESCRIPTORS 128 /* num of descriptors */

-#define GELIC_NET_MAX_MTU VLAN_ETH_FRAME_LEN -#define GELIC_NET_MIN_MTU VLAN_ETH_ZLEN +#define GELIC_NET_MAX_FRAME 2312 +#define GELIC_NET_MAX_MTU 2294 +#define GELIC_NET_MIN_MTU 64 #define GELIC_NET_RXBUF_ALIGN 128 #define GELIC_CARD_RX_CSUM_DEFAULT 1 /* hw chksum */ #define GELIC_NET_WATCHDOG_TIMEOUT 5*HZ

From: Daniel Borkmann daniel@iogearbox.net

[ Upstream commit 10ec8ca8ec1a2f04c4ed90897225231c58c124a7 ]

We've seen recent AWS EKS (Kubernetes) user reports like the following:

After upgrading EKS nodes from v20230203 to v20230217 on our 1.24 EKS clusters after a few days a number of the nodes have containers stuck in ContainerCreating state or liveness/readiness probes reporting the following error:

Readiness probe errored: rpc error: code = Unknown desc = failed to exec in container: failed to start exec "4a11039f730203ffc003b7[...]": OCI runtime exec failed: exec failed: unable to start container process: unable to init seccomp: error loading seccomp filter into kernel: error loading seccomp filter: errno 524: unknown

However, we had not been seeing this issue on previous AMIs and it only started to occur on v20230217 (following the upgrade from kernel 5.4 to 5.10) with no other changes to the underlying cluster or workloads.

We tried the suggestions from that issue (sysctl net.core.bpf_jit_limit=452534528) which helped to immediately allow containers to be created and probes to execute but after approximately a day the issue returned and the value returned by cat /proc/vmallocinfo | grep bpf_jit | awk '{s+=$2} END {print s}' was steadily increasing.

I tested bpf tree to observe bpf_jit_charge_modmem, bpf_jit_uncharge_modmem their sizes passed in as well as bpf_jit_current under tcpdump BPF filter, seccomp BPF and native (e)BPF programs, and the behavior all looks sane and expected, that is nothing "leaking" from an upstream perspective.

The bpf_jit_limit knob was originally added in order to avoid a situation where unprivileged applications loading BPF programs (e.g. seccomp BPF policies) consuming all the module memory space via BPF JIT such that loading of kernel modules would be prevented. The default limit was defined back in 2018 and while good enough back then, we are generally seeing far more BPF consumers today.

Adjust the limit for the BPF JIT pool from originally 1/4 to now 1/2 of the module memory space to better reflect today's needs and avoid more users running into potentially hard to debug issues.

Fixes: fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K") Reported-by: Stephen Haynes sh@synk.net Reported-by: Lefteris Alexakis lefteris.alexakis@kpn.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Link: https://github.com/awslabs/amazon-eks-ami/issues/1179 Link: https://github.com/awslabs/amazon-eks-ami/issues/1219 Reviewed-by: Kuniyuki Iwashima kuniyu@amazon.com Link: https://lore.kernel.org/r/20230320143725.8394-1-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/bpf/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index 24e16538e4d71..285101772c755 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -603,7 +603,7 @@ static int __init bpf_jit_charge_init(void) { /* Only used as heuristic here to derive limit. */ bpf_jit_limit_max = bpf_jit_alloc_exec_limit(); - bpf_jit_limit = min_t(u64, round_up(bpf_jit_limit_max >> 2, + bpf_jit_limit = min_t(u64, round_up(bpf_jit_limit_max >> 1, PAGE_SIZE), LONG_MAX); return 0; }

From: Li Zetao lizetao1@huawei.com

[ Upstream commit 4fe3c88552a3fbe1944426a4506a18cdeb457b5a ]

There are memory leaks reported by kmemleak:

unreferenced object 0xffff888106500800 (size 128): comm "modprobe", pid 1017, jiffies 4297787785 (age 67.152s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000970ce626>] __kmem_cache_alloc_node+0x20c/0x380 [<00000000fb5f78d9>] kmalloc_trace+0x2f/0xb0 [<000000000e947e2a>] idt77252_init_one+0x2847/0x3c90 [idt77252] [<000000006efb048e>] local_pci_probe+0xeb/0x1a0 ...

unreferenced object 0xffff888106500b00 (size 128): comm "modprobe", pid 1017, jiffies 4297787785 (age 67.152s) hex dump (first 32 bytes): 00 20 3d 01 80 88 ff ff 00 20 3d 01 80 88 ff ff . =...... =..... f0 23 3d 01 80 88 ff ff 00 20 3d 01 00 00 00 00 .#=...... =..... backtrace: [<00000000970ce626>] __kmem_cache_alloc_node+0x20c/0x380 [<00000000fb5f78d9>] kmalloc_trace+0x2f/0xb0 [<00000000f451c5be>] alloc_scq.constprop.0+0x4a/0x400 [idt77252] [<00000000e6313849>] idt77252_init_one+0x28cf/0x3c90 [idt77252]

The root cause is traced to the vc_maps which alloced in open_card_oam() are not freed in close_card_oam(). The vc_maps are used to record open connections, so when close a vc_map in close_card_oam(), the memory should be freed. Moreover, the ubr0 is not closed when close a idt77252 device, leading to the memory leak of vc_map and scq_info.

Fix them by adding kfree in close_card_oam() and implementing new close_card_ubr0() to close ubr0.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Li Zetao lizetao1@huawei.com Reviewed-by: Francois Romieu romieu@fr.zoreil.com Link: https://lore.kernel.org/r/20230320143318.2644630-1-lizetao1@huawei.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/idt77252.c | 11 +++++++++++ 1 file changed, 11 insertions(+)

diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c index bc06f5919839c..3380322df98e0 100644 --- a/drivers/atm/idt77252.c +++ b/drivers/atm/idt77252.c @@ -2915,6 +2915,7 @@ close_card_oam(struct idt77252_dev *card)

recycle_rx_pool_skb(card, &vc->rcv.rx_pool); } + kfree(vc); } } } @@ -2958,6 +2959,15 @@ open_card_ubr0(struct idt77252_dev *card) return 0; }

+static void +close_card_ubr0(struct idt77252_dev *card) +{ + struct vc_map *vc = card->vcs[0]; + + free_scq(card, vc->scq); + kfree(vc); +} + static int idt77252_dev_open(struct idt77252_dev *card) { @@ -3007,6 +3017,7 @@ static void idt77252_dev_close(struct atm_dev *dev) struct idt77252_dev *card = dev->dev_data; u32 conf;

+ close_card_ubr0(card); close_card_oam(card);

conf = SAR_CFG_RXPTH | /* enable receive path */

From: Zhang Changzhong zhangchangzhong@huawei.com

[ Upstream commit 4107b8746d93ace135b8c4da4f19bbae81db785f ]

The DMA address returned by dma_map_single() should be checked with dma_mapping_error(). Fix it accordingly.

Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update") Signed-off-by: Zhang Changzhong zhangchangzhong@huawei.com Tested-by: Stan Johnson userm57@yahoo.com Signed-off-by: Finn Thain fthain@linux-m68k.org Reviewed-by: Leon Romanovsky leonro@nvidia.com Link: https://lore.kernel.org/r/6645a4b5c1e364312103f48b7b36783b94e197a2.167937034... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/natsemi/sonic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/natsemi/sonic.c b/drivers/net/ethernet/natsemi/sonic.c index 69282f31d519e..fe54bcab705f8 100644 --- a/drivers/net/ethernet/natsemi/sonic.c +++ b/drivers/net/ethernet/natsemi/sonic.c @@ -255,7 +255,7 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev) */

laddr = dma_map_single(lp->device, skb->data, length, DMA_TO_DEVICE); - if (!laddr) { + if (dma_mapping_error(lp->device, laddr)) { pr_err_ratelimited("%s: failed to map tx DMA buffer.\n", dev->name); dev_kfree_skb_any(skb); return NETDEV_TX_OK; @@ -473,7 +473,7 @@ static bool sonic_alloc_rb(struct net_device *dev, struct sonic_local *lp,

*new_addr = dma_map_single(lp->device, skb_put(*new_skb, SONIC_RBSIZE), SONIC_RBSIZE, DMA_FROM_DEVICE); - if (!*new_addr) { + if (dma_mapping_error(lp->device, *new_addr)) { dev_kfree_skb(*new_skb); *new_skb = NULL; return false;

From: Liang He windhl@126.com

[ Upstream commit b1de5c78ebe9858ccec9d49af2f76724f1d47e3e ]

In device_for_each_child_node(), we should add fwnode_handle_put() when break out of the iteration device_for_each_child_node() as it will automatically increase and decrease the refcounter.

Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.") Signed-off-by: Liang He windhl@126.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/mdio-thunder.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/phy/mdio-thunder.c b/drivers/net/phy/mdio-thunder.c index c0c922eff760c..959bf342133a7 100644 --- a/drivers/net/phy/mdio-thunder.c +++ b/drivers/net/phy/mdio-thunder.c @@ -107,6 +107,7 @@ static int thunder_mdiobus_pci_probe(struct pci_dev *pdev, if (i >= ARRAY_SIZE(nexus->buses)) break; } + fwnode_handle_put(fwn); return 0;

err_release_regions:

From: Zheng Wang zyytlz.wz@163.com

[ Upstream commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f ]

In btsdio_probe, &data->work was bound with btsdio_work.In btsdio_send_frame, it was started by schedule_work.

If we call btsdio_remove with an unfinished job, there may be a race condition and cause UAF bug on hdev.

Fixes: ddbaf13e3609 ("[Bluetooth] Add generic driver for Bluetooth SDIO devices") Signed-off-by: Zheng Wang zyytlz.wz@163.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bluetooth/btsdio.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c index 20142bc77554c..bd55bf7a9914c 100644 --- a/drivers/bluetooth/btsdio.c +++ b/drivers/bluetooth/btsdio.c @@ -353,6 +353,7 @@ static void btsdio_remove(struct sdio_func *func)

BT_DBG("func %p", func);

+ cancel_work_sync(&data->work); if (!data) return;

From: Yaroslav Furman yaro330@gmail.com

commit a37eb61b6ec064ac794b8a1e89fd33eb582fe51d upstream.

Just like other JMicron JMS5xx enclosures, it chokes on report-opcodes, let's avoid them.

Signed-off-by: Yaroslav Furman yaro330@gmail.com Cc: stable stable@kernel.org Link: https://lore.kernel.org/r/20230312090745.47962-1-yaro330@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+)

--- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -111,6 +111,13 @@ UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x99 USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BROKEN_FUA),

+/* Reported by: Yaroslav Furman yaro330@gmail.com */ +UNUSUAL_DEV(0x152d, 0x0583, 0x0000, 0x9999, + "JMicron", + "JMS583Gen 2", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_REPORT_OPCODES), + /* Reported-by: Thinh Nguyen thinhn@synopsys.com */ UNUSUAL_DEV(0x154b, 0xf00b, 0x0000, 0x9999, "PNY",

From: Alexandre Ghiti alex@ghiti.fr

[ Upstream commit 61fc1ee8be26bc192d691932b0a67eabee45d12f ]

Increase COMMAND_LINE_SIZE as the current default value is too low for syzbot kernel command line.

There has been considerable discussion on this patch that has led to a larger patch set removing COMMAND_LINE_SIZE from the uapi headers on all ports. That's not quite done yet, but it's gotten far enough we're confident this is not a uABI change so this is safe.

Reported-by: Dmitry Vyukov dvyukov@google.com Signed-off-by: Alexandre Ghiti alex@ghiti.fr Link: https://lore.kernel.org/r/20210316193420.904-1-alex@ghiti.fr [Palmer: it's not uabi] Link: https://lore.kernel.org/linux-riscv/874b8076-b0d1-4aaa-bcd8-05d523060152@app... Signed-off-by: Palmer Dabbelt palmer@rivosinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/include/uapi/asm/setup.h | 8 ++++++++ 1 file changed, 8 insertions(+) create mode 100644 arch/riscv/include/uapi/asm/setup.h

diff --git a/arch/riscv/include/uapi/asm/setup.h b/arch/riscv/include/uapi/asm/setup.h new file mode 100644 index 0000000000000..66b13a5228808 --- /dev/null +++ b/arch/riscv/include/uapi/asm/setup.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ + +#ifndef _UAPI_ASM_RISCV_SETUP_H +#define _UAPI_ASM_RISCV_SETUP_H + +#define COMMAND_LINE_SIZE 1024 + +#endif /* _UAPI_ASM_RISCV_SETUP_H */

From: Michael Schmitz schmitzmic@gmail.com

[ Upstream commit e36a82bebbf7da814530d5a179bef9df5934b717 ]

__get_kernel_nofault() does copy data in supervisor mode when forcing a task backtrace log through /proc/sysrq_trigger. This is expected cause a bus error exception on e.g. NULL pointer dereferencing when logging a kernel task has no workqueue associated. This bus error ought to be ignored.

Our 030 bus error handler is ill equipped to deal with this:

Whenever ssw indicates a kernel mode access on a data fault, we don't even attempt to handle the fault and instead always send a SEGV signal (or panic). As a result, the check for exception handling at the fault PC (buried in send_sig_fault() which gets called from do_page_fault() eventually) is never used.

In contrast, both 040 and 060 access error handlers do not care whether a fault happened on supervisor mode access, and will call do_page_fault() on those, ultimately honoring the exception table.

Add a check in bus_error030 to call do_page_fault() in case we do have an entry for the fault PC in our exception table.

I had attempted a fix for this earlier in 2019 that did rely on testing pagefault_disabled() (see link below) to achieve the same thing, but this patch should be more generic.

Tested on 030 Atari Falcon.

Reported-by: Eero Tamminen oak@helsinkinet.fi Link: https://lore.kernel.org/r/alpine.LNX.2.21.1904091023540.25@nippy.intranet Link: https://lore.kernel.org/r/63130691-1984-c423-c1f2-73bfd8d3dcd3@gmail.com Signed-off-by: Michael Schmitz schmitzmic@gmail.com Reviewed-by: Geert Uytterhoeven geert@linux-m68k.org Link: https://lore.kernel.org/r/20230301021107.26307-1-schmitzmic@gmail.com Signed-off-by: Geert Uytterhoeven geert@linux-m68k.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/m68k/kernel/traps.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c index 9b70a7f5e7058..35f706d836c50 100644 --- a/arch/m68k/kernel/traps.c +++ b/arch/m68k/kernel/traps.c @@ -30,6 +30,7 @@ #include <linux/init.h> #include <linux/ptrace.h> #include <linux/kallsyms.h> +#include <linux/extable.h>

#include <asm/setup.h> #include <asm/fpu.h> @@ -550,7 +551,8 @@ static inline void bus_error030 (struct frame *fp) errorcode |= 2;

if (mmusr & (MMU_I | MMU_WP)) { - if (ssw & 4) { + /* We might have an exception table for this PC */ + if (ssw & 4 && !search_exception_tables(fp->ptregs.pc)) { pr_err("Data %s fault at %#010lx in %s (pc=%#lx)\n", ssw & RW ? "read" : "write", fp->un.fmtb.daddr,

From: Adrien Thierry athierry@redhat.com

[ Upstream commit 2ebe16155dc8bd4e602cad5b5f65458d2eaa1a75 ]

The ufshcd driver uses simpleondemand governor for devfreq. Add it to the list of ufshcd softdeps to allow userspace initramfs tools like dracut to automatically pull the governor module into the initramfs together with UFS drivers.

Link: https://lore.kernel.org/r/20230220140740.14379-1-athierry@redhat.com Signed-off-by: Adrien Thierry athierry@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufshcd.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index abc156cf05f60..b45cd6c98bad7 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -8228,5 +8228,6 @@ EXPORT_SYMBOL_GPL(ufshcd_init); MODULE_AUTHOR("Santosh Yaragnavi santosh.sy@samsung.com"); MODULE_AUTHOR("Vinayak Holikatti h.vinayak@samsung.com"); MODULE_DESCRIPTION("Generic UFS host controller driver Core"); +MODULE_SOFTDEP("pre: governor_simpleondemand"); MODULE_LICENSE("GPL"); MODULE_VERSION(UFSHCD_DRIVER_VERSION);

From: Enrico Sau enrico.sau@gmail.com

[ Upstream commit 382e363d5bed0cec5807b35761d14e55955eee63 ]

Add the following Telit FE990 composition:

0x1080: tty, adb, rmnet, tty, tty, tty, tty

Signed-off-by: Enrico Sau enrico.sau@gmail.com Link: https://lore.kernel.org/r/20230306120528.198842-1-enrico.sau@gmail.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 24ce49b311c4c..5417932242e77 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1322,6 +1322,7 @@ static const struct usb_device_id products[] = { {QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)}, /* Telit FN980 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)}, /* Telit LN920 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1070, 2)}, /* Telit FN990 */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1080, 2)}, /* Telit FE990 */ {QMI_FIXED_INTF(0x1bc7, 0x1100, 3)}, /* Telit ME910 */ {QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */

From: Shyam Prasad N sprasad@microsoft.com

commit 896cd316b841053f6df95ab77b5f1322c16a8e18 upstream.

When querying server interfaces returns -EOPNOTSUPP, clear the list of interfaces. Assumption is that multichannel would be disabled too.

Signed-off-by: Shyam Prasad N sprasad@microsoft.com Reviewed-by: Paulo Alcantara (SUSE) pc@manguebit.com Cc: stable@vger.kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/cifs/smb2ops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -475,7 +475,7 @@ SMB3_request_interfaces(const unsigned i if (rc == -EOPNOTSUPP) { cifs_dbg(FYI, "server does not support query network interfaces\n"); - goto out; + ret_data_len = 0; } else if (rc != 0) { cifs_dbg(VFS, "error %d on ioctl to get interface list\n", rc); goto out;

From: Alvin Šipraga alsi@bang-olufsen.dk

commit 6c67ed9ad9b83e453e808f9b31a931a20a25629b upstream.

In the unbind callback for f_uac1 and f_uac2, a call to snd_card_free() via g_audio_cleanup() will disconnect the card and then wait for all resources to be released, which happens when the refcount falls to zero. Since userspace can keep the refcount incremented by not closing the relevant file descriptor, the call to unbind may block indefinitely. This can cause a deadlock during reboot, as evidenced by the following blocked task observed on my machine:

task:reboot state:D stack:0 pid:2827 ppid:569 flags:0x0000000c Call trace: __switch_to+0xc8/0x140 __schedule+0x2f0/0x7c0 schedule+0x60/0xd0 schedule_timeout+0x180/0x1d4 wait_for_completion+0x78/0x180 snd_card_free+0x90/0xa0 g_audio_cleanup+0x2c/0x64 afunc_unbind+0x28/0x60 ... kernel_restart+0x4c/0xac __do_sys_reboot+0xcc/0x1ec __arm64_sys_reboot+0x28/0x30 invoke_syscall+0x4c/0x110 ...

The issue can also be observed by opening the card with arecord and then stopping the process through the shell before unbinding:

# arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null Recording WAVE '/dev/null' : Signed 32 bit Little Endian, Rate 48000 Hz, Stereo ^Z[1]+ Stopped arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null # echo gadget.0 > /sys/bus/gadget/drivers/configfs-gadget/unbind (observe that the unbind command never finishes)

Fix the problem by using snd_card_free_when_closed() instead, which will still disconnect the card as desired, but defer the task of freeing the resources to the core once userspace closes its file descriptor.

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver") Cc: stable@vger.kernel.org Signed-off-by: Alvin Šipraga alsi@bang-olufsen.dk Reviewed-by: Ruslan Bilovol ruslan.bilovol@gmail.com Reviewed-by: John Keeping john@metanate.com Link: https://lore.kernel.org/r/20230302163648.3349669-1-alvin@pqrs.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/gadget/function/u_audio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/function/u_audio.c +++ b/drivers/usb/gadget/function/u_audio.c @@ -626,7 +626,7 @@ void g_audio_cleanup(struct g_audio *g_a uac = g_audio->uac; card = uac->card; if (card) - snd_card_free(card); + snd_card_free_when_closed(card);

kfree(uac->p_prm.ureq); kfree(uac->c_prm.ureq);

From: Coly Li colyli@suse.de

commit 9bbf5feecc7eab2c370496c1c161bbfe62084028 upstream.

This is an already known issue that dm-thin volume cannot be used as swap, otherwise a deadlock may happen when dm-thin internal memory demand triggers swap I/O on the dm-thin volume itself.

But thanks to commit a666e5c05e7c ("dm: fix deadlock when swapping to encrypted device"), the limit_swap_bios target flag can also be used for dm-thin to avoid the recursive I/O when it is used as swap.

Fix is to simply set ti->limit_swap_bios to true in both pool_ctr() and thin_ctr().

In my test, I create a dm-thin volume /dev/vg/swap and use it as swap device. Then I run fio on another dm-thin volume /dev/vg/main and use large --blocksize to trigger swap I/O onto /dev/vg/swap.

The following fio command line is used in my test, fio --name recursive-swap-io --lockmem 1 --iodepth 128 \ --ioengine libaio --filename /dev/vg/main --rw randrw \ --blocksize 1M --numjobs 32 --time_based --runtime=12h

Without this fix, the whole system can be locked up within 15 seconds.

With this fix, there is no any deadlock or hung task observed after 2 hours of running fio.

Furthermore, if blocksize is changed from 1M to 128M, after around 30 seconds fio has no visible I/O, and the out-of-memory killer message shows up in kernel message. After around 20 minutes all fio processes are killed and the whole system is back to being alive.

This is exactly what is expected when recursive I/O happens on dm-thin volume when it is used as swap.

Depends-on: a666e5c05e7c ("dm: fix deadlock when swapping to encrypted device") Cc: stable@vger.kernel.org Signed-off-by: Coly Li colyli@suse.de Acked-by: Mikulas Patocka mpatocka@redhat.com Signed-off-by: Mike Snitzer snitzer@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/dm-thin.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -3365,6 +3365,7 @@ static int pool_ctr(struct dm_target *ti pt->low_water_blocks = low_water_blocks; pt->adjusted_pf = pt->requested_pf = pf; ti->num_flush_bios = 1; + ti->limit_swap_bios = true;

/* * Only need to enable discards if the pool should pass @@ -4245,6 +4246,7 @@ static int thin_ctr(struct dm_target *ti goto bad;

ti->num_flush_bios = 1; + ti->limit_swap_bios = true; ti->flush_supported = true; ti->per_io_data_size = sizeof(struct dm_thin_endio_hook);

From: Xu Yang xu.yang_2@nxp.com

commit 451b15ed138ec15bffbebb58a00ebdd884c3e659 upstream.

The user may call role_store() when driver is handling ci_handle_id_switch() which is triggerred by otg event or power lost event. Unfortunately, the controller may go into chaos in this case. Fix this by protecting it with mutex lock.

Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group") cc: stable@vger.kernel.org Acked-by: Peter Chen peter.chen@kernel.org Signed-off-by: Xu Yang xu.yang_2@nxp.com Link: https://lore.kernel.org/r/20230317061516.2451728-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/chipidea/ci.h | 2 ++ drivers/usb/chipidea/core.c | 8 +++++++- drivers/usb/chipidea/otg.c | 5 ++++- 3 files changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -202,6 +202,7 @@ struct hw_bank { * @in_lpm: if the core in low power mode * @wakeup_int: if wakeup interrupt occur * @rev: The revision number for controller + * @mutex: protect code from concorrent running when doing role switch */ struct ci_hdrc { struct device *dev; @@ -254,6 +255,7 @@ struct ci_hdrc { bool in_lpm; bool wakeup_int; enum ci_revision rev; + struct mutex mutex; };

static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci) --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -875,8 +875,12 @@ static ssize_t role_store(struct device if (role == CI_ROLE_END) return -EINVAL;

- if (role == ci->role) + mutex_lock(&ci->mutex); + + if (role == ci->role) { + mutex_unlock(&ci->mutex); return n; + }

pm_runtime_get_sync(dev); disable_irq(ci->irq); @@ -886,6 +890,7 @@ static ssize_t role_store(struct device ci_handle_vbus_change(ci); enable_irq(ci->irq); pm_runtime_put_sync(dev); + mutex_unlock(&ci->mutex);

return (ret == 0) ? n : ret; } @@ -924,6 +929,7 @@ static int ci_hdrc_probe(struct platform return -ENOMEM;

spin_lock_init(&ci->lock); + mutex_init(&ci->mutex); ci->dev = dev; ci->platdata = dev_get_platdata(dev); ci->imx28_write_fix = !!(ci->platdata->flags & --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -164,8 +164,10 @@ static int hw_wait_vbus_lower_bsv(struct

static void ci_handle_id_switch(struct ci_hdrc *ci) { - enum ci_role role = ci_otg_role(ci); + enum ci_role role;

+ mutex_lock(&ci->mutex); + role = ci_otg_role(ci); if (role != ci->role) { dev_dbg(ci->dev, "switching from %s to %s\n", ci_role(ci)->name, ci->roles[role]->name); @@ -188,6 +190,7 @@ static void ci_handle_id_switch(struct c if (role == CI_ROLE_GADGET) ci_handle_vbus_change(ci); } + mutex_unlock(&ci->mutex); } /** * ci_otg_work - perform otg (vbus/id) event handle

From: Wei Chen harperchen1110@gmail.com

commit 92fbb6d1296f81f41f65effd7f5f8c0f74943d15 upstream.

The data->block[0] variable comes from user and is a number between 0-255. Without proper check, the variable may be very large to cause an out-of-bounds when performing memcpy in slimpro_i2c_blkwr.

Fix this bug by checking the value of writelen.

Fixes: f6505fbabc42 ("i2c: add SLIMpro I2C device driver on APM X-Gene platform") Signed-off-by: Wei Chen harperchen1110@gmail.com Cc: stable@vger.kernel.org Reviewed-by: Andi Shyti andi.shyti@kernel.org Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/i2c/busses/i2c-xgene-slimpro.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/i2c/busses/i2c-xgene-slimpro.c +++ b/drivers/i2c/busses/i2c-xgene-slimpro.c @@ -321,6 +321,9 @@ static int slimpro_i2c_blkwr(struct slim u32 msg[3]; int rc;

+ if (writelen > I2C_SMBUS_BLOCK_MAX) + return -EINVAL; + memcpy(ctx->dma_buffer, data, writelen); paddr = dma_map_single(ctx->dev, ctx->dma_buffer, writelen, DMA_TO_DEVICE);

From: Mikulas Patocka mpatocka@redhat.com

commit fb294b1c0ba982144ca467a75e7d01ff26304e2b upstream.

The loop in dmcrypt_write may be running for unbounded amount of time, thus we need cond_resched() in it.

This commit fixes the following warning:

[ 3391.153255][ C12] watchdog: BUG: soft lockup - CPU#12 stuck for 23s! [dmcrypt_write/2:2897] ... [ 3391.387210][ C12] Call trace: [ 3391.390338][ C12] blk_attempt_bio_merge.part.6+0x38/0x158 [ 3391.395970][ C12] blk_attempt_plug_merge+0xc0/0x1b0 [ 3391.401085][ C12] blk_mq_submit_bio+0x398/0x550 [ 3391.405856][ C12] submit_bio_noacct+0x308/0x380 [ 3391.410630][ C12] dmcrypt_write+0x1e4/0x208 [dm_crypt] [ 3391.416005][ C12] kthread+0x130/0x138 [ 3391.419911][ C12] ret_from_fork+0x10/0x18

Reported-by: yangerkun yangerkun@huawei.com Fixes: dc2676210c42 ("dm crypt: offload writes to thread") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka mpatocka@redhat.com Signed-off-by: Mike Snitzer snitzer@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/dm-crypt.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -1661,6 +1661,7 @@ pop_from_list: io = crypt_io_from_node(rb_first(&write_tree)); rb_erase(&io->rb_node, &write_tree); kcryptd_io_write(io); + cond_resched(); } while (!RB_EMPTY_ROOT(&write_tree)); blk_finish_plug(&plug); }

From: Vincent Guittot vincent.guittot@linaro.org

commit a53ce18cacb477dd0513c607f187d16f0fa96f71 upstream.

Commit 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed") fixes an overflowing bug, but ignore a case that se->exec_start is reset after a migration.

For fixing this case, we delay the reset of se->exec_start after placing the entity which se->exec_start to detect long sleeping task.

In order to take into account a possible divergence between the clock_task of 2 rqs, we increase the threshold to around 104 days.

Fixes: 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed") Originally-by: Zhang Qiao zhangqiao22@huawei.com Signed-off-by: Vincent Guittot vincent.guittot@linaro.org Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Tested-by: Zhang Qiao zhangqiao22@huawei.com Link: https://lore.kernel.org/r/20230317160810.107988-1-vincent.guittot@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/sched/core.c | 3 ++ kernel/sched/fair.c | 53 ++++++++++++++++++++++++++++++++++++++++++---------- 2 files changed, 46 insertions(+), 10 deletions(-)

--- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -741,6 +741,9 @@ static inline void dequeue_task(struct r

void activate_task(struct rq *rq, struct task_struct *p, int flags) { + if (task_on_rq_migrating(p)) + flags |= ENQUEUE_MIGRATED; + if (task_contributes_to_load(p)) rq->nr_uninterruptible--;

--- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -3854,11 +3854,33 @@ static void check_spread(struct cfs_rq * #endif }

+static inline bool entity_is_long_sleeper(struct sched_entity *se) +{ + struct cfs_rq *cfs_rq; + u64 sleep_time; + + if (se->exec_start == 0) + return false; + + cfs_rq = cfs_rq_of(se); + + sleep_time = rq_clock_task(rq_of(cfs_rq)); + + /* Happen while migrating because of clock task divergence */ + if (sleep_time <= se->exec_start) + return false; + + sleep_time -= se->exec_start; + if (sleep_time > ((1ULL << 63) / scale_load_down(NICE_0_LOAD))) + return true; + + return false; +} + static void place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial) { u64 vruntime = cfs_rq->min_vruntime; - u64 sleep_time;

/* * The 'current' period is already promised to the current tasks, @@ -3885,13 +3907,24 @@ place_entity(struct cfs_rq *cfs_rq, stru

/* * Pull vruntime of the entity being placed to the base level of - * cfs_rq, to prevent boosting it if placed backwards. If the entity - * slept for a long time, don't even try to compare its vruntime with - * the base as it may be too far off and the comparison may get - * inversed due to s64 overflow. + * cfs_rq, to prevent boosting it if placed backwards. + * However, min_vruntime can advance much faster than real time, with + * the extreme being when an entity with the minimal weight always runs + * on the cfs_rq. If the waking entity slept for a long time, its + * vruntime difference from min_vruntime may overflow s64 and their + * comparison may get inversed, so ignore the entity's original + * vruntime in that case. + * The maximal vruntime speedup is given by the ratio of normal to + * minimal weight: scale_load_down(NICE_0_LOAD) / MIN_SHARES. + * When placing a migrated waking entity, its exec_start has been set + * from a different rq. In order to take into account a possible + * divergence between new and prev rq's clocks task because of irq and + * stolen time, we take an additional margin. + * So, cutting off on the sleep time of + * 2^63 / scale_load_down(NICE_0_LOAD) ~ 104 days + * should be safe. */ - sleep_time = rq_clock_task(rq_of(cfs_rq)) - se->exec_start; - if ((s64)sleep_time > 60LL * NSEC_PER_SEC) + if (entity_is_long_sleeper(se)) se->vruntime = vruntime; else se->vruntime = max_vruntime(se->vruntime, vruntime); @@ -3989,6 +4022,9 @@ enqueue_entity(struct cfs_rq *cfs_rq, st

if (flags & ENQUEUE_WAKEUP) place_entity(cfs_rq, se, 0); + /* Entity has migrated, no longer consider this task hot */ + if (flags & ENQUEUE_MIGRATED) + se->exec_start = 0;

check_schedstat_required(); update_stats_enqueue(cfs_rq, se, flags); @@ -6555,9 +6591,6 @@ static void migrate_task_rq_fair(struct /* Tell new CPU we are migrated */ p->se.avg.last_update_time = 0;

- /* We have migrated, no longer consider this task hot */ - p->se.exec_start = 0; - update_scan_period(p, new_cpu); }

From: Jan Kara via Ocfs2-devel ocfs2-devel@oss.oracle.com

commit 90410bcf873cf05f54a32183afff0161f44f9715 upstream.

When buffered write fails to copy data into underlying page cache page, ocfs2_write_end_nolock() just zeroes out and dirties the page. This can leave dirty page beyond EOF and if page writeback tries to write this page before write succeeds and expands i_size, page gets into inconsistent state where page dirty bit is clear but buffer dirty bits stay set resulting in page data never getting written and so data copied to the page is lost. Fix the problem by invalidating page beyond EOF after failed write.

Link: https://lkml.kernel.org/r/20230302153843.18499-1-jack@suse.cz Fixes: 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") Signed-off-by: Jan Kara jack@suse.cz Reviewed-by: Joseph Qi joseph.qi@linux.alibaba.com Cc: Mark Fasheh mark@fasheh.com Cc: Joel Becker jlbec@evilplan.org Cc: Junxiao Bi junxiao.bi@oracle.com Cc: Changwei Ge gechangwei@live.cn Cc: Gang He ghe@suse.com Cc: Jun Piao piaojun@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org [ replace block_invalidate_folio to block_invalidatepage ] Signed-off-by: Joseph Qi joseph.qi@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ocfs2/aops.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)

--- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -2003,11 +2003,25 @@ int ocfs2_write_end_nolock(struct addres }

if (unlikely(copied < len) && wc->w_target_page) { + loff_t new_isize; + if (!PageUptodate(wc->w_target_page)) copied = 0;

- ocfs2_zero_new_buffers(wc->w_target_page, start+copied, - start+len); + new_isize = max_t(loff_t, i_size_read(inode), pos + copied); + if (new_isize > page_offset(wc->w_target_page)) + ocfs2_zero_new_buffers(wc->w_target_page, start+copied, + start+len); + else { + /* + * When page is fully beyond new isize (data copy + * failed), do not bother zeroing the page. Invalidate + * it instead so that writeback does not get confused + * put page & buffer dirty bits into inconsistent + * state. + */ + block_invalidatepage(wc->w_target_page, 0, PAGE_SIZE); + } } if (wc->w_target_page) flush_dcache_page(wc->w_target_page);

From: NeilBrown neilb@suse.de

[ Upstream commit 3bc57292278a0b6ac4656cad94c14f2453344b57 ]

slot_store() uses kstrtouint() to get a slot number, but stores the result in an "int" variable (by casting a pointer). This can result in a negative slot number if the unsigned int value is very large.

A negative number means that the slot is empty, but setting a negative slot number this way will not remove the device from the array. I don't think this is a serious problem, but it could cause confusion and it is best to fix it.

Reported-by: Dan Carpenter error27@gmail.com Signed-off-by: NeilBrown neilb@suse.de Signed-off-by: Song Liu song@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/md.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/md/md.c b/drivers/md/md.c index 89d4dcc5253e5..f8c111b369928 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2991,6 +2991,9 @@ slot_store(struct md_rdev *rdev, const char *buf, size_t len) err = kstrtouint(buf, 10, (unsigned int *)&slot); if (err < 0) return err; + if (slot < 0) + /* overflow */ + return -ENOSPC; } if (rdev->mddev->pers && slot == -1) { /* Setting 'slot' on an active array requires also

From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com

[ Upstream commit 98e5eb110095ec77cb6d775051d181edbf9cd3cf ]

tuning_ctl_set() might have buffer overrun at (X) if it didn't break from loop by matching (A).

static int tuning_ctl_set(...) { for (i = 0; i < TUNING_CTLS_COUNT; i++) (A) if (nid == ca0132_tuning_ctls[i].nid) break;

snd_hda_power_up(...); (X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...); snd_hda_power_down(...); ^

return 1; }

We will get below error by cppcheck

sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12 for (i = 0; i < TUNING_CTLS_COUNT; i++) ^ sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ^ This patch cares non match case.

Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87sfe9eap7.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/patch_ca0132.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index ca8a37388d565..9f0e6bbc523c3 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -3620,8 +3620,10 @@ static int tuning_ctl_set(struct hda_codec *codec, hda_nid_t nid,

for (i = 0; i < TUNING_CTLS_COUNT; i++) if (nid == ca0132_tuning_ctls[i].nid) - break; + goto found;

+ return -EINVAL; +found: snd_hda_power_up(codec); dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ca0132_tuning_ctls[i].req,

From: Linus Torvalds torvalds@linux-foundation.org

[ Upstream commit 6015b1aca1a233379625385feb01dd014aca60b5 ]

The getaffinity() system call uses 'cpumask_size()' to decide how big the CPU mask is - so far so good. It is indeed the allocation size of a cpumask.

But the code also assumes that the whole allocation is initialized without actually doing so itself. That's wrong, because we might have fixed-size allocations (making copying and clearing more efficient), but not all of it is then necessarily used if 'nr_cpu_ids' is smaller.

Having checked other users of 'cpumask_size()', they all seem to be ok, either using it purely for the allocation size, or explicitly zeroing the cpumask before using the size in bytes to copy it.

See for example the ublk_ctrl_get_queue_affinity() function that uses the proper 'zalloc_cpumask_var()' to make sure that the whole mask is cleared, whether the storage is on the stack or if it was an external allocation.

Fix this by just zeroing the allocation before using it. Do the same for the compat version of sched_getaffinity(), which had the same logic.

Also, for consistency, make sched_getaffinity() use 'cpumask_bits()' to access the bits. For a cpumask_var_t, it ends up being a pointer to the same data either way, but it's just a good idea to treat it like you would a 'cpumask_t'. The compat case already did that.

Reported-by: Ryan Roberts ryan.roberts@arm.com Link: https://lore.kernel.org/lkml/7d026744-6bd6-6827-0471-b5e8eae0be3f@arm.com/ Cc: Yury Norov yury.norov@gmail.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/compat.c | 2 +- kernel/sched/core.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/compat.c b/kernel/compat.c index e4548a9e9c52c..5f320b0db8d09 100644 --- a/kernel/compat.c +++ b/kernel/compat.c @@ -307,7 +307,7 @@ COMPAT_SYSCALL_DEFINE3(sched_getaffinity, compat_pid_t, pid, unsigned int, len, if (len & (sizeof(compat_ulong_t)-1)) return -EINVAL;

- if (!alloc_cpumask_var(&mask, GFP_KERNEL)) + if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) return -ENOMEM;

ret = sched_getaffinity(pid, mask); diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 207cd446b9d36..8d5a9fa8a951c 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -4953,14 +4953,14 @@ SYSCALL_DEFINE3(sched_getaffinity, pid_t, pid, unsigned int, len, if (len & (sizeof(unsigned long)-1)) return -EINVAL;

- if (!alloc_cpumask_var(&mask, GFP_KERNEL)) + if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) return -ENOMEM;

ret = sched_getaffinity(pid, mask); if (ret == 0) { unsigned int retlen = min(len, cpumask_size());

- if (copy_to_user(user_mask_ptr, mask, retlen)) + if (copy_to_user(user_mask_ptr, cpumask_bits(mask), retlen)) ret = -EFAULT; else ret = retlen;

From: Wei Chen harperchen1110@gmail.com

[ Upstream commit d823685486a3446d061fed7c7d2f80af984f119a ]

Variable var->pixclock is controlled by user and can be assigned to zero. Without proper check, divide by zero would occur in intelfbhw_validate_mode and intelfbhw_mode_to_hw.

Error out if var->pixclock is zero.

Signed-off-by: Wei Chen harperchen1110@gmail.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/intelfb/intelfbdrv.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/video/fbdev/intelfb/intelfbdrv.c b/drivers/video/fbdev/intelfb/intelfbdrv.c index d7463a2a5d83f..c97c0c8514809 100644 --- a/drivers/video/fbdev/intelfb/intelfbdrv.c +++ b/drivers/video/fbdev/intelfb/intelfbdrv.c @@ -1215,6 +1215,9 @@ static int intelfb_check_var(struct fb_var_screeninfo *var,

dinfo = GET_DINFO(info);

+ if (!var->pixclock) + return -EINVAL; + /* update the pitch */ if (intelfbhw_validate_mode(dinfo, var) != 0) return -EINVAL;

From: Wei Chen harperchen1110@gmail.com

[ Upstream commit 44a3b36b42acfc433aaaf526191dd12fbb919fdb ]

var->pixclock can be assigned to zero by user. Without proper check, divide by zero would occur when invoking macro PICOS2KHZ in au1200fb_fb_check_var.

Error out if var->pixclock is zero.

Signed-off-by: Wei Chen harperchen1110@gmail.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/au1200fb.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/video/fbdev/au1200fb.c b/drivers/video/fbdev/au1200fb.c index 3872ccef4cb2c..f8e83a9519189 100644 --- a/drivers/video/fbdev/au1200fb.c +++ b/drivers/video/fbdev/au1200fb.c @@ -1039,6 +1039,9 @@ static int au1200fb_fb_check_var(struct fb_var_screeninfo *var, u32 pixclock; int screen_size, plane;

+ if (!var->pixclock) + return -EINVAL; + plane = fbdev->plane;

/* Make sure that the mode respect all LCD controller and

From: Tomas Henzl thenzl@redhat.com

[ Upstream commit 2309df27111a51734cb9240b4d3c25f2f3c6ab06 ]

When a physical disk is attached directly "without JBOD MAP support" (see megasas_get_tm_devhandle()) then there is no real error handling in the driver. Return FAILED instead of SUCCESS.

Fixes: 18365b138508 ("megaraid_sas: Task management support") Signed-off-by: Tomas Henzl thenzl@redhat.com Link: https://lore.kernel.org/r/20230324150134.14696-1-thenzl@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/megaraid/megaraid_sas_fusion.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index bdb12bf0d5c75..b400167f9ad42 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -4367,7 +4367,7 @@ int megasas_task_abort_fusion(struct scsi_cmnd *scmd) devhandle = megasas_get_tm_devhandle(scmd->device);

if (devhandle == (u16)ULONG_MAX) { - ret = SUCCESS; + ret = FAILED; sdev_printk(KERN_INFO, scmd->device, "task abort issued for invalid devhandle\n"); mutex_unlock(&instance->reset_mutex); @@ -4440,7 +4440,7 @@ int megasas_reset_target_fusion(struct scsi_cmnd *scmd) devhandle = megasas_get_tm_devhandle(scmd->device);

if (devhandle == (u16)ULONG_MAX) { - ret = SUCCESS; + ret = FAILED; sdev_printk(KERN_INFO, scmd->device, "target reset issued for invalid devhandle\n"); mutex_unlock(&instance->reset_mutex);

From: Radoslaw Tyl radoslawx.tyl@intel.com

[ Upstream commit c5cff16f461a4a434a9915a7be7ac9ced861a8a4 ]

Fix invalid registers dump from ethtool -d ethX after adapter self test by ethtool -t ethY. It causes invalid data display.

The problem was caused by overwriting i40e_reg_list[].elements which is common for ethtool self test and dump.

Fixes: 22dd9ae8afcc ("i40e: Rework register diagnostic") Signed-off-by: Radoslaw Tyl radoslawx.tyl@intel.com Reviewed-by: Michal Swiatkowski michal.swiatkowski@linux.intel.com Tested-by: Arpana Arland arpanax.arland@intel.com (A Contingent worker at Intel) Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Reviewed-by: Leon Romanovsky leonro@nvidia.com Link: https://lore.kernel.org/r/20230328172659.3906413-1-anthony.l.nguyen@intel.co... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/i40e/i40e_diag.c | 11 ++++++----- drivers/net/ethernet/intel/i40e/i40e_diag.h | 2 +- 2 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_diag.c b/drivers/net/ethernet/intel/i40e/i40e_diag.c index ef4d3762bf371..ca229b0efeb65 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_diag.c +++ b/drivers/net/ethernet/intel/i40e/i40e_diag.c @@ -44,7 +44,7 @@ static i40e_status i40e_diag_reg_pattern_test(struct i40e_hw *hw, return 0; }

-struct i40e_diag_reg_test_info i40e_reg_list[] = { +const struct i40e_diag_reg_test_info i40e_reg_list[] = { /* offset mask elements stride */ {I40E_QTX_CTL(0), 0x0000FFBF, 1, I40E_QTX_CTL(1) - I40E_QTX_CTL(0)}, @@ -78,27 +78,28 @@ i40e_status i40e_diag_reg_test(struct i40e_hw *hw) { i40e_status ret_code = 0; u32 reg, mask; + u32 elements; u32 i, j;

for (i = 0; i40e_reg_list[i].offset != 0 && !ret_code; i++) {

+ elements = i40e_reg_list[i].elements; /* set actual reg range for dynamically allocated resources */ if (i40e_reg_list[i].offset == I40E_QTX_CTL(0) && hw->func_caps.num_tx_qp != 0) - i40e_reg_list[i].elements = hw->func_caps.num_tx_qp; + elements = hw->func_caps.num_tx_qp; if ((i40e_reg_list[i].offset == I40E_PFINT_ITRN(0, 0) || i40e_reg_list[i].offset == I40E_PFINT_ITRN(1, 0) || i40e_reg_list[i].offset == I40E_PFINT_ITRN(2, 0) || i40e_reg_list[i].offset == I40E_QINT_TQCTL(0) || i40e_reg_list[i].offset == I40E_QINT_RQCTL(0)) && hw->func_caps.num_msix_vectors != 0) - i40e_reg_list[i].elements = - hw->func_caps.num_msix_vectors - 1; + elements = hw->func_caps.num_msix_vectors - 1;

/* test register access */ mask = i40e_reg_list[i].mask; - for (j = 0; j < i40e_reg_list[i].elements && !ret_code; j++) { + for (j = 0; j < elements && !ret_code; j++) { reg = i40e_reg_list[i].offset + (j * i40e_reg_list[i].stride); ret_code = i40e_diag_reg_pattern_test(hw, reg, mask); diff --git a/drivers/net/ethernet/intel/i40e/i40e_diag.h b/drivers/net/ethernet/intel/i40e/i40e_diag.h index c3340f320a18c..1db7c6d572311 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_diag.h +++ b/drivers/net/ethernet/intel/i40e/i40e_diag.h @@ -20,7 +20,7 @@ struct i40e_diag_reg_test_info { u32 stride; /* bytes between each element */ };

-extern struct i40e_diag_reg_test_info i40e_reg_list[]; +extern const struct i40e_diag_reg_test_info i40e_reg_list[];

i40e_status i40e_diag_reg_test(struct i40e_hw *hw); i40e_status i40e_diag_eeprom_test(struct i40e_hw *hw);

From: Lorenzo Bianconi lorenzo@kernel.org

[ Upstream commit 9e58c8b410650b5a6eb5b8fad8474bd8425a4023 ]

Allow tx buffer array to contain both skb and xdp buffers in order to enable xdp frame recycling adding XDP_TX verdict support

Signed-off-by: Lorenzo Bianconi lorenzo@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Stable-dep-of: 2960a2d33b02 ("net: mvneta: fix potential double-frees in mvneta_txq_sw_deinit()") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/marvell/mvneta.c | 66 +++++++++++++++++---------- 1 file changed, 43 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index fd13116812006..f1a4b11ce0d19 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -542,6 +542,20 @@ struct mvneta_rx_desc { }; #endif

+enum mvneta_tx_buf_type { + MVNETA_TYPE_SKB, + MVNETA_TYPE_XDP_TX, + MVNETA_TYPE_XDP_NDO, +}; + +struct mvneta_tx_buf { + enum mvneta_tx_buf_type type; + union { + struct xdp_frame *xdpf; + struct sk_buff *skb; + }; +}; + struct mvneta_tx_queue { /* Number of this TX queue, in the range 0-7 */ u8 id; @@ -557,8 +571,8 @@ struct mvneta_tx_queue { int tx_stop_threshold; int tx_wake_threshold;

- /* Array of transmitted skb */ - struct sk_buff **tx_skb; + /* Array of transmitted buffers */ + struct mvneta_tx_buf *buf;

/* Index of last TX DMA descriptor that was inserted */ int txq_put_index; @@ -1767,14 +1781,9 @@ static void mvneta_txq_bufs_free(struct mvneta_port *pp, int i;

for (i = 0; i < num; i++) { + struct mvneta_tx_buf *buf = &txq->buf[txq->txq_get_index]; struct mvneta_tx_desc *tx_desc = txq->descs + txq->txq_get_index; - struct sk_buff *skb = txq->tx_skb[txq->txq_get_index]; - - if (skb) { - bytes_compl += skb->len; - pkts_compl++; - }

mvneta_txq_inc_get(txq);

@@ -1782,9 +1791,12 @@ static void mvneta_txq_bufs_free(struct mvneta_port *pp, dma_unmap_single(pp->dev->dev.parent, tx_desc->buf_phys_addr, tx_desc->data_size, DMA_TO_DEVICE); - if (!skb) + if (!buf->skb) continue; - dev_kfree_skb_any(skb); + + bytes_compl += buf->skb->len; + pkts_compl++; + dev_kfree_skb_any(buf->skb); }

netdev_tx_completed_queue(nq, pkts_compl, bytes_compl); @@ -2238,16 +2250,19 @@ static inline void mvneta_tso_put_hdr(struct sk_buff *skb, struct mvneta_port *pp, struct mvneta_tx_queue *txq) { - struct mvneta_tx_desc *tx_desc; int hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index]; + struct mvneta_tx_desc *tx_desc;

- txq->tx_skb[txq->txq_put_index] = NULL; tx_desc = mvneta_txq_next_desc_get(txq); tx_desc->data_size = hdr_len; tx_desc->command = mvneta_skb_tx_csum(pp, skb); tx_desc->command |= MVNETA_TXD_F_DESC; tx_desc->buf_phys_addr = txq->tso_hdrs_phys + txq->txq_put_index * TSO_HEADER_SIZE; + buf->type = MVNETA_TYPE_SKB; + buf->skb = NULL; + mvneta_txq_inc_put(txq); }

@@ -2256,6 +2271,7 @@ mvneta_tso_put_data(struct net_device *dev, struct mvneta_tx_queue *txq, struct sk_buff *skb, char *data, int size, bool last_tcp, bool is_last) { + struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index]; struct mvneta_tx_desc *tx_desc;

tx_desc = mvneta_txq_next_desc_get(txq); @@ -2269,7 +2285,8 @@ mvneta_tso_put_data(struct net_device *dev, struct mvneta_tx_queue *txq, }

tx_desc->command = 0; - txq->tx_skb[txq->txq_put_index] = NULL; + buf->type = MVNETA_TYPE_SKB; + buf->skb = NULL;

if (last_tcp) { /* last descriptor in the TCP packet */ @@ -2277,7 +2294,7 @@ mvneta_tso_put_data(struct net_device *dev, struct mvneta_tx_queue *txq,

/* last descriptor in SKB */ if (is_last) - txq->tx_skb[txq->txq_put_index] = skb; + buf->skb = skb; } mvneta_txq_inc_put(txq); return 0; @@ -2362,6 +2379,7 @@ static int mvneta_tx_frag_process(struct mvneta_port *pp, struct sk_buff *skb, int i, nr_frags = skb_shinfo(skb)->nr_frags;

for (i = 0; i < nr_frags; i++) { + struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index]; skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; void *addr = page_address(frag->page.p) + frag->page_offset;

@@ -2381,12 +2399,13 @@ static int mvneta_tx_frag_process(struct mvneta_port *pp, struct sk_buff *skb, if (i == nr_frags - 1) { /* Last descriptor */ tx_desc->command = MVNETA_TXD_L_DESC | MVNETA_TXD_Z_PAD; - txq->tx_skb[txq->txq_put_index] = skb; + buf->skb = skb; } else { /* Descriptor in the middle: Not First, Not Last */ tx_desc->command = 0; - txq->tx_skb[txq->txq_put_index] = NULL; + buf->skb = NULL; } + buf->type = MVNETA_TYPE_SKB; mvneta_txq_inc_put(txq); }

@@ -2414,6 +2433,7 @@ static netdev_tx_t mvneta_tx(struct sk_buff *skb, struct net_device *dev) struct mvneta_port *pp = netdev_priv(dev); u16 txq_id = skb_get_queue_mapping(skb); struct mvneta_tx_queue *txq = &pp->txqs[txq_id]; + struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index]; struct mvneta_tx_desc *tx_desc; int len = skb->len; int frags = 0; @@ -2446,16 +2466,17 @@ static netdev_tx_t mvneta_tx(struct sk_buff *skb, struct net_device *dev) goto out; }

+ buf->type = MVNETA_TYPE_SKB; if (frags == 1) { /* First and Last descriptor */ tx_cmd |= MVNETA_TXD_FLZ_DESC; tx_desc->command = tx_cmd; - txq->tx_skb[txq->txq_put_index] = skb; + buf->skb = skb; mvneta_txq_inc_put(txq); } else { /* First but not Last */ tx_cmd |= MVNETA_TXD_F_DESC; - txq->tx_skb[txq->txq_put_index] = NULL; + buf->skb = NULL; mvneta_txq_inc_put(txq); tx_desc->command = tx_cmd; /* Continue with other skb fragments */ @@ -3000,9 +3021,8 @@ static int mvneta_txq_sw_init(struct mvneta_port *pp,

txq->last_desc = txq->size - 1;

- txq->tx_skb = kmalloc_array(txq->size, sizeof(*txq->tx_skb), - GFP_KERNEL); - if (!txq->tx_skb) { + txq->buf = kmalloc_array(txq->size, sizeof(*txq->buf), GFP_KERNEL); + if (!txq->buf) { dma_free_coherent(pp->dev->dev.parent, txq->size * MVNETA_DESC_ALIGNED_SIZE, txq->descs, txq->descs_phys); @@ -3014,7 +3034,7 @@ static int mvneta_txq_sw_init(struct mvneta_port *pp, txq->size * TSO_HEADER_SIZE, &txq->tso_hdrs_phys, GFP_KERNEL); if (!txq->tso_hdrs) { - kfree(txq->tx_skb); + kfree(txq->buf); dma_free_coherent(pp->dev->dev.parent, txq->size * MVNETA_DESC_ALIGNED_SIZE, txq->descs, txq->descs_phys); @@ -3069,7 +3089,7 @@ static void mvneta_txq_sw_deinit(struct mvneta_port *pp, { struct netdev_queue *nq = netdev_get_tx_queue(pp->dev, txq->id);

- kfree(txq->tx_skb); + kfree(txq->buf);

if (txq->tso_hdrs) dma_free_coherent(pp->dev->dev.parent,

From: Jason A. Donenfeld Jason@zx2c4.com

commit 8980f190947ba29f23110408e712444884b74251 upstream.

The recent change of -funsigned-char causes additions of negative numbers to become additions of large positive numbers, leading to wrong calculations of mouse movement. Change these casts to be explicitly signed, to take into account negative offsets.

Fixes: 3bc753c06dd0 ("kbuild: treat char as always unsigned") Signed-off-by: Jason A. Donenfeld Jason@zx2c4.com Reviewed-by: Hans de Goede hdegoede@redhat.com Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217211 Link: https://lore.kernel.org/r/20230318133010.1285202-1-Jason@zx2c4.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/input/mouse/focaltech.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/input/mouse/focaltech.c +++ b/drivers/input/mouse/focaltech.c @@ -206,8 +206,8 @@ static void focaltech_process_rel_packet state->pressed = packet[0] >> 7; finger1 = ((packet[0] >> 4) & 0x7) - 1; if (finger1 < FOC_MAX_FINGERS) { - state->fingers[finger1].x += (char)packet[1]; - state->fingers[finger1].y += (char)packet[2]; + state->fingers[finger1].x += (s8)packet[1]; + state->fingers[finger1].y += (s8)packet[2]; } else { psmouse_err(psmouse, "First finger in rel packet invalid: %d\n", finger1); @@ -222,8 +222,8 @@ static void focaltech_process_rel_packet */ finger2 = ((packet[3] >> 4) & 0x7) - 1; if (finger2 < FOC_MAX_FINGERS) { - state->fingers[finger2].x += (char)packet[4]; - state->fingers[finger2].y += (char)packet[5]; + state->fingers[finger2].x += (s8)packet[4]; + state->fingers[finger2].y += (s8)packet[5]; } }

From: David Disseldorp ddiss@suse.de

commit 179a88a8558bbf42991d361595281f3e45d7edfc upstream.

When compiled with CONFIG_CIFS_DFS_UPCALL disabled, cifs_dfs_d_automount is NULL. cifs.ko logic for mapping CIFS_FATTR_DFS_REFERRAL attributes to S_AUTOMOUNT and corresponding dentry flags is retained regardless of CONFIG_CIFS_DFS_UPCALL, leading to a NULL pointer dereference in VFS follow_automount() when traversing a DFS referral link: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> __traverse_mounts+0xb5/0x220 ? cifs_revalidate_mapping+0x65/0xc0 [cifs] step_into+0x195/0x610 ? lookup_fast+0xe2/0xf0 path_lookupat+0x64/0x140 filename_lookup+0xc2/0x140 ? __create_object+0x299/0x380 ? kmem_cache_alloc+0x119/0x220 ? user_path_at_empty+0x31/0x50 user_path_at_empty+0x31/0x50 __x64_sys_chdir+0x2a/0xd0 ? exit_to_user_mode_prepare+0xca/0x100 do_syscall_64+0x42/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc

This fix adds an inline cifs_dfs_d_automount() {return -EREMOTE} handler when CONFIG_CIFS_DFS_UPCALL is disabled. An alternative would be to avoid flagging S_AUTOMOUNT, etc. without CONFIG_CIFS_DFS_UPCALL. This approach was chosen as it provides more control over the error path.

Signed-off-by: David Disseldorp ddiss@suse.de Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) pc@manguebit.com Reviewed-by: Ronnie Sahlberg lsahlber@redhat.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/cifs/cifsfs.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -121,7 +121,10 @@ extern const struct dentry_operations ci #ifdef CONFIG_CIFS_DFS_UPCALL extern struct vfsmount *cifs_dfs_d_automount(struct path *path); #else -#define cifs_dfs_d_automount NULL +static inline struct vfsmount *cifs_dfs_d_automount(struct path *path) +{ + return ERR_PTR(-EREMOTE); +} #endif

/* Functions related to symlinks */

From: Johan Hovold johan+linaro@kernel.org

commit 7bb97e360acdd38b68ad0a1defb89c6e89c85596 upstream.

Since commit d59f6617eef0 ("genirq: Allow fwnode to carry name information only") an IRQ domain is always given a name during allocation (e.g. used for the debugfs entry).

Drop the no longer valid name assignment, which would lead to an attempt to free a string constant when removing the domain on late probe failures (e.g. probe deferral).

Fixes: d59f6617eef0 ("genirq: Allow fwnode to carry name information only") Cc: stable@vger.kernel.org # 4.13 Signed-off-by: Johan Hovold johan+linaro@kernel.org Reviewed-by: Claudiu Beznea claudiu.beznea@microchip.com Tested-by: Claudiu Beznea claudiu.beznea@microchip.com # on SAMA7G5 Link: https://lore.kernel.org/r/20230224130828.27985-1-johan+linaro@kernel.org Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pinctrl/pinctrl-at91-pio4.c | 1 - 1 file changed, 1 deletion(-)

--- a/drivers/pinctrl/pinctrl-at91-pio4.c +++ b/drivers/pinctrl/pinctrl-at91-pio4.c @@ -1080,7 +1080,6 @@ static int atmel_pinctrl_probe(struct pl dev_err(dev, "can't add the irq domain\n"); return -ENODEV; } - atmel_pioctrl->irq_domain->name = "atmel gpio";

for (i = 0; i < atmel_pioctrl->npins; i++) { int irq = irq_create_mapping(atmel_pioctrl->irq_domain, i);

From: Takashi Iwai tiwai@suse.de

commit fa4e7a6fa12b1132340785e14bd439cbe95b7a5a upstream.

It's been reported that the recent kernel can't probe the PCM devices on Roland VS-100 properly, and it turned out to be a regression by the recent addition of the bit shift range check for the format bits. In the old code, we just did bit-shift and it resulted in zero, which is then corrected to the standard PCM format, while the new code explicitly returns an error in such a case.

For addressing the regression, relax the check and fallback to the standard PCM type (with the info output).

Fixes: 43d5ca88dfcd ("ALSA: usb-audio: Fix potential out-of-bounds shift") Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217084 Link: https://lore.kernel.org/r/20230324075005.19403-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/usb/format.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -53,8 +53,12 @@ static u64 parse_audio_format_i_type(str case UAC_VERSION_1: default: { struct uac_format_type_i_discrete_descriptor *fmt = _fmt; - if (format >= 64) - return 0; /* invalid format */ + if (format >= 64) { + usb_audio_info(chip, + "%u:%d: invalid format type 0x%llx is detected, processed as PCM\n", + fp->iface, fp->altsetting, format); + format = UAC_FORMAT_TYPE_I_PCM; + } sample_width = fmt->bBitResolution; sample_bytes = fmt->bSubframeSize; format = 1ULL << format;

From: Heiko Carstens hca@linux.ibm.com

commit 89aba4c26fae4e459f755a18912845c348ee48f3 upstream.

Add missing earlyclobber annotation to size, to, and tmp2 operands of the __clear_user() inline assembly since they are modified or written to before the last usage of all input operands. This can lead to incorrect register allocation for the inline assembly.

Fixes: 6c2a9e6df604 ("[S390] Use alternative user-copy operations for new hardware.") Reported-by: Mark Rutland mark.rutland@arm.com Link: https://lore.kernel.org/all/20230321122514.1743889-3-mark.rutland@arm.com/ Cc: stable@vger.kernel.org Reviewed-by: Gerald Schaefer gerald.schaefer@linux.ibm.com Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/s390/lib/uaccess.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/s390/lib/uaccess.c +++ b/arch/s390/lib/uaccess.c @@ -339,7 +339,7 @@ static inline unsigned long clear_user_m "4: slgr %0,%0\n" "5:\n" EX_TABLE(0b,2b) EX_TABLE(3b,5b) - : "+a" (size), "+a" (to), "+a" (tmp1), "=a" (tmp2) + : "+&a" (size), "+&a" (to), "+a" (tmp1), "=&a" (tmp2) : "a" (empty_zero_page), "d" (reg0) : "cc", "memory"); return size; }

From: Ye Bin yebin10@huawei.com

commit 5c099c4fdc438014d5893629e70a8ba934433ee8 upstream.

Syzbot report follow issue: ------------[ cut here ]------------ kernel BUG at fs/ext4/inline.c:227! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 3629 Comm: syz-executor212 Not tainted 6.1.0-rc5-syzkaller-00018-g59d0d52c30d4 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:ext4_write_inline_data+0x344/0x3e0 fs/ext4/inline.c:227 RSP: 0018:ffffc90003b3f368 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8880704e16c0 RCX: 0000000000000000 RDX: ffff888021763a80 RSI: ffffffff821e31a4 RDI: 0000000000000006 RBP: 000000000006818e R08: 0000000000000006 R09: 0000000000068199 R10: 0000000000000079 R11: 0000000000000000 R12: 000000000000000b R13: 0000000000068199 R14: ffffc90003b3f408 R15: ffff8880704e1c82 FS: 000055555723e3c0(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fffe8ac9080 CR3: 0000000079f81000 CR4: 0000000000350ee0 Call Trace: <TASK> ext4_write_inline_data_end+0x2a3/0x12f0 fs/ext4/inline.c:768 ext4_write_end+0x242/0xdd0 fs/ext4/inode.c:1313 ext4_da_write_end+0x3ed/0xa30 fs/ext4/inode.c:3063 generic_perform_write+0x316/0x570 mm/filemap.c:3764 ext4_buffered_write_iter+0x15b/0x460 fs/ext4/file.c:285 ext4_file_write_iter+0x8bc/0x16e0 fs/ext4/file.c:700 call_write_iter include/linux/fs.h:2191 [inline] do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735 do_iter_write+0x182/0x700 fs/read_write.c:861 vfs_iter_write+0x74/0xa0 fs/read_write.c:902 iter_file_splice_write+0x745/0xc90 fs/splice.c:686 do_splice_from fs/splice.c:764 [inline] direct_splice_actor+0x114/0x180 fs/splice.c:931 splice_direct_to_actor+0x335/0x8a0 fs/splice.c:886 do_splice_direct+0x1ab/0x280 fs/splice.c:974 do_sendfile+0xb19/0x1270 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x1d0/0x210 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd ---[ end trace 0000000000000000 ]---

Above issue may happens as follows: ext4_da_write_begin ext4_da_write_inline_data_begin ext4_da_convert_inline_data_to_extent ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA); ext4_da_write_end

ext4_run_li_request ext4_mb_prefetch ext4_read_block_bitmap_nowait ext4_validate_block_bitmap ext4_mark_group_bitmap_corrupted(sb, block_group, EXT4_GROUP_INFO_BBITMAP_CORRUPT) percpu_counter_sub(&sbi->s_freeclusters_counter,grp->bb_free); -> sbi->s_freeclusters_counter become zero ext4_da_write_begin if (ext4_nonda_switch(inode->i_sb)) -> As freeclusters_counter is zero will return true *fsdata = (void *)FALL_BACK_TO_NONDELALLOC; ext4_write_begin ext4_da_write_end if (write_mode == FALL_BACK_TO_NONDELALLOC) ext4_write_end if (inline_data) ext4_write_inline_data_end ext4_write_inline_data BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); -> As inode is already convert to extent, so 'pos + len' > inline_size -> then trigger BUG.

To solve this issue, instead of checking ext4_has_inline_data() which is only cleared after data has been written back, check the EXT4_STATE_MAY_INLINE_DATA flag in ext4_write_end().

Fixes: f19d5870cbf7 ("ext4: add normal write support for inline data") Reported-by: syzbot+4faa160fa96bfba639f8@syzkaller.appspotmail.com Reported-by: Jun Nie jun.nie@linaro.org Signed-off-by: Ye Bin yebin10@huawei.com Link: https://lore.kernel.org/r/20221206144134.1919987-1-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o tytso@mit.edu Cc: stable@kernel.org [ta: Fix conflict in if expression and use the local variable inline_data as it is initialized with ext4_has_inline_data(inode) anyway.] Signed-off-by: Tudor Ambarus tudor.ambarus@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ext4/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1428,7 +1428,8 @@ static int ext4_write_end(struct file *f int inline_data = ext4_has_inline_data(inode);

trace_ext4_write_end(inode, pos, len, copied); - if (inline_data) { + if (inline_data && + ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) { ret = ext4_write_inline_data_end(inode, pos, len, copied, page); if (ret < 0) {

From: Andreas Gruenbacher agruenba@redhat.com

commit 70376c7ff31221f1d21db5611d8209e677781d3a upstream.

Check if the inode size of stuffed (inline) inodes is within the allowed range when reading inodes from disk (gfs2_dinode_in()). This prevents us from on-disk corruption.

The two checks in stuffed_readpage() and gfs2_unstuffer_page() that just truncate inline data to the maximum allowed size don't actually make sense, and they can be removed now as well.

Reported-by: syzbot+7bb81dfa9cda07d9cd9d@syzkaller.appspotmail.com Signed-off-by: Andreas Gruenbacher agruenba@redhat.com [pchelkin@ispras.ru: adjust the inode variable inside gfs2_dinode_in with the format used before upstream commit 7db354444ad8 ("gfs2: Cosmetic gfs2_dinode_{in,out} cleanup")] Signed-off-by: Fedor Pchelkin pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/gfs2/aops.c | 2 -- fs/gfs2/bmap.c | 3 --- fs/gfs2/glops.c | 3 +++ 3 files changed, 3 insertions(+), 5 deletions(-)

--- a/fs/gfs2/aops.c +++ b/fs/gfs2/aops.c @@ -480,8 +480,6 @@ int stuffed_readpage(struct gfs2_inode * return error;

kaddr = kmap_atomic(page); - if (dsize > gfs2_max_stuffed_size(ip)) - dsize = gfs2_max_stuffed_size(ip); memcpy(kaddr, dibh->b_data + sizeof(struct gfs2_dinode), dsize); memset(kaddr + dsize, 0, PAGE_SIZE - dsize); kunmap_atomic(kaddr); --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -72,9 +72,6 @@ static int gfs2_unstuffer_page(struct gf void *kaddr = kmap(page); u64 dsize = i_size_read(inode);

- if (dsize > gfs2_max_stuffed_size(ip)) - dsize = gfs2_max_stuffed_size(ip); - memcpy(kaddr, dibh->b_data + sizeof(struct gfs2_dinode), dsize); memset(kaddr + dsize, 0, PAGE_SIZE - dsize); kunmap(page); --- a/fs/gfs2/glops.c +++ b/fs/gfs2/glops.c @@ -388,6 +388,9 @@ static int gfs2_dinode_in(struct gfs2_in ip->i_depth = (u8)depth; ip->i_entries = be32_to_cpu(str->di_entries);

+ if (gfs2_is_stuffed(ip) && ip->i_inode.i_size > gfs2_max_stuffed_size(ip)) + goto corrupt; + if (S_ISREG(ip->i_inode.i_mode)) gfs2_set_aops(&ip->i_inode);

From: Juri Lelli juri.lelli@redhat.com

commit d74b27d63a8bebe2fe634944e4ebdc7b10db7a39 upstream.

commit 1243dc518c9da ("cgroup/cpuset: Convert cpuset_mutex to percpu_rwsem") is performance patch which is not backport. So convert percpu_rwsem to cpuset_mutex.

commit aa44002e7db25 ("cpuset: Fix unsafe lock order between cpuset lock and cpuslock") makes lock order keep cpuset_mutex ->cpu_hotplug_lock. We should change lock order in cpuset_attach.

original commit message:

cpuset_rwsem is going to be acquired from sched_setscheduler() with a following patch. There are however paths (e.g., spawn_ksoftirqd) in which sched_scheduler() is eventually called while holding hotplug lock; this creates a dependecy between hotplug lock (to be always acquired first) and cpuset_rwsem (to be always acquired after hotplug lock).

Fix paths which currently take the two locks in the wrong order (after a following patch is applied).

Tested-by: Dietmar Eggemann dietmar.eggemann@arm.com Signed-off-by: Juri Lelli juri.lelli@redhat.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: bristot@redhat.com Cc: claudio@evidence.eu.com Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: mathieu.poirier@linaro.org Cc: rostedt@goodmis.org Cc: tj@kernel.org Cc: tommaso.cucinotta@santannapisa.it Link: https://lkml.kernel.org/r/20190719140000.31694-7-juri.lelli@redhat.com Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Cai Xinchen caixinchen1@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- v2: * Change get_online_cpus/put_online_cpus lock order in cpuset_attach to keep cpuset_mutex and hotplug lock order Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/cpuset.h | 8 ++++---- kernel/cgroup/cpuset.c | 24 +++++++++++++++++------- 2 files changed, 21 insertions(+), 11 deletions(-)

--- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -40,14 +40,14 @@ static inline bool cpusets_enabled(void)

static inline void cpuset_inc(void) { - static_branch_inc(&cpusets_pre_enable_key); - static_branch_inc(&cpusets_enabled_key); + static_branch_inc_cpuslocked(&cpusets_pre_enable_key); + static_branch_inc_cpuslocked(&cpusets_enabled_key); }

static inline void cpuset_dec(void) { - static_branch_dec(&cpusets_enabled_key); - static_branch_dec(&cpusets_pre_enable_key); + static_branch_dec_cpuslocked(&cpusets_enabled_key); + static_branch_dec_cpuslocked(&cpusets_pre_enable_key); }

extern int cpuset_init(void); --- a/kernel/cgroup/cpuset.c +++ b/kernel/cgroup/cpuset.c @@ -830,8 +830,8 @@ static void rebuild_sched_domains_locked cpumask_var_t *doms; int ndoms;

+ lockdep_assert_cpus_held(); lockdep_assert_held(&cpuset_mutex); - get_online_cpus();

/* * We have raced with CPU hotplug. Don't do anything to avoid @@ -839,15 +839,13 @@ static void rebuild_sched_domains_locked * Anyways, hotplug work item will rebuild sched domains. */ if (!cpumask_equal(top_cpuset.effective_cpus, cpu_active_mask)) - goto out; + return;

/* Generate domain masks and attrs */ ndoms = generate_sched_domains(&doms, &attr);

/* Have scheduler rebuild the domains */ partition_sched_domains(ndoms, doms, attr); -out: - put_online_cpus(); } #else /* !CONFIG_SMP */ static void rebuild_sched_domains_locked(void) @@ -857,9 +855,11 @@ static void rebuild_sched_domains_locked

void rebuild_sched_domains(void) { + get_online_cpus(); mutex_lock(&cpuset_mutex); rebuild_sched_domains_locked(); mutex_unlock(&cpuset_mutex); + put_online_cpus(); }

/** @@ -1528,13 +1528,13 @@ static void cpuset_attach(struct cgroup_ cgroup_taskset_first(tset, &css); cs = css_cs(css);

- mutex_lock(&cpuset_mutex); - /* * It should hold cpus lock because a cpu offline event can * cause set_cpus_allowed_ptr() failed. */ get_online_cpus(); + mutex_lock(&cpuset_mutex); + /* prepare for attach */ if (cs == &top_cpuset) cpumask_copy(cpus_attach, cpu_possible_mask); @@ -1553,7 +1553,6 @@ static void cpuset_attach(struct cgroup_ cpuset_change_task_nodemask(task, &cpuset_attach_nodemask_to); cpuset_update_task_spread_flag(cs, task); } - put_online_cpus();

/* * Change mm for all threadgroup leaders. This is expensive and may @@ -1589,6 +1588,7 @@ static void cpuset_attach(struct cgroup_ wake_up(&cpuset_attach_wq);

mutex_unlock(&cpuset_mutex); + put_online_cpus(); }

/* The various types of files and directories in a cpuset file system */ @@ -1617,6 +1617,7 @@ static int cpuset_write_u64(struct cgrou cpuset_filetype_t type = cft->private; int retval = 0;

+ get_online_cpus(); mutex_lock(&cpuset_mutex); if (!is_cpuset_online(cs)) { retval = -ENODEV; @@ -1654,6 +1655,7 @@ static int cpuset_write_u64(struct cgrou } out_unlock: mutex_unlock(&cpuset_mutex); + put_online_cpus(); return retval; }

@@ -1664,6 +1666,7 @@ static int cpuset_write_s64(struct cgrou cpuset_filetype_t type = cft->private; int retval = -ENODEV;

+ get_online_cpus(); mutex_lock(&cpuset_mutex); if (!is_cpuset_online(cs)) goto out_unlock; @@ -1678,6 +1681,7 @@ static int cpuset_write_s64(struct cgrou } out_unlock: mutex_unlock(&cpuset_mutex); + put_online_cpus(); return retval; }

@@ -1716,6 +1720,7 @@ static ssize_t cpuset_write_resmask(stru kernfs_break_active_protection(of->kn); flush_work(&cpuset_hotplug_work);

+ get_online_cpus(); mutex_lock(&cpuset_mutex); if (!is_cpuset_online(cs)) goto out_unlock; @@ -1741,6 +1746,7 @@ static ssize_t cpuset_write_resmask(stru free_trial_cpuset(trialcs); out_unlock: mutex_unlock(&cpuset_mutex); + put_online_cpus(); kernfs_unbreak_active_protection(of->kn); css_put(&cs->css); flush_workqueue(cpuset_migrate_mm_wq); @@ -1985,6 +1991,7 @@ static int cpuset_css_online(struct cgro if (!parent) return 0;

+ get_online_cpus(); mutex_lock(&cpuset_mutex);

set_bit(CS_ONLINE, &cs->flags); @@ -2035,6 +2042,7 @@ static int cpuset_css_online(struct cgro spin_unlock_irq(&callback_lock); out_unlock: mutex_unlock(&cpuset_mutex); + put_online_cpus(); return 0; }

@@ -2048,6 +2056,7 @@ static void cpuset_css_offline(struct cg { struct cpuset *cs = css_cs(css);

+ get_online_cpus(); mutex_lock(&cpuset_mutex);

if (is_sched_load_balance(cs)) @@ -2057,6 +2066,7 @@ static void cpuset_css_offline(struct cg clear_bit(CS_ONLINE, &cs->flags);

mutex_unlock(&cpuset_mutex); + put_online_cpus(); }

static void cpuset_css_free(struct cgroup_subsys_state *css)

From: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp

commit 43626dade36fa74d3329046f4ae2d7fdefe401c6 upstream.

syzbot is hitting percpu_rwsem_assert_held(&cpu_hotplug_lock) warning at cpuset_attach() [1], for commit 4f7e7236435ca0ab ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") missed that cpuset_attach() is also called from cgroup_attach_task_all(). Add cpus_read_lock() like what cgroup_procs_write_start() does.

Link: https://syzkaller.appspot.com/bug?extid=29d3a3b4d86c8136ad9e [1] Reported-by: syzbot syzbot+29d3a3b4d86c8136ad9e@syzkaller.appspotmail.com Signed-off-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Fixes: 4f7e7236435ca0ab ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Cai Xinchen caixinchen1@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/cgroup/cgroup-v1.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/kernel/cgroup/cgroup-v1.c +++ b/kernel/cgroup/cgroup-v1.c @@ -13,6 +13,7 @@ #include <linux/delayacct.h> #include <linux/pid_namespace.h> #include <linux/cgroupstats.h> +#include <linux/cpu.h>

#include <trace/events/cgroup.h>

@@ -55,6 +56,7 @@ int cgroup_attach_task_all(struct task_s int retval = 0;

mutex_lock(&cgroup_mutex); + get_online_cpus(); percpu_down_write(&cgroup_threadgroup_rwsem); for_each_root(root) { struct cgroup *from_cgrp; @@ -71,6 +73,7 @@ int cgroup_attach_task_all(struct task_s break; } percpu_up_write(&cgroup_threadgroup_rwsem); + put_online_cpus(); mutex_unlock(&cgroup_mutex);

return retval;