From: Dan Robertson dan@dlrobertson.com
[ Upstream commit 9fdd04918a452980631ecc499317881c1d120b70 ]
Fix a logic error that could result in a null deref if the user sets the mode incorrectly for the given addr type.
Signed-off-by: Dan Robertson dan@dlrobertson.com Acked-by: Alexander Aring aahringo@redhat.com Link: https://lore.kernel.org/r/20210423040214.15438-2-dan@dlrobertson.com Signed-off-by: Stefan Schmidt stefan@datenfreihafen.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ieee802154/nl802154.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c index 05f6bd89a7dd..0cf2374c143b 100644 --- a/net/ieee802154/nl802154.c +++ b/net/ieee802154/nl802154.c @@ -1298,19 +1298,20 @@ ieee802154_llsec_parse_dev_addr(struct nlattr *nla, if (!nla || nla_parse_nested_deprecated(attrs, NL802154_DEV_ADDR_ATTR_MAX, nla, nl802154_dev_addr_policy, NULL)) return -EINVAL;
- if (!attrs[NL802154_DEV_ADDR_ATTR_PAN_ID] || - !attrs[NL802154_DEV_ADDR_ATTR_MODE] || - !(attrs[NL802154_DEV_ADDR_ATTR_SHORT] || - attrs[NL802154_DEV_ADDR_ATTR_EXTENDED])) + if (!attrs[NL802154_DEV_ADDR_ATTR_PAN_ID] || !attrs[NL802154_DEV_ADDR_ATTR_MODE]) return -EINVAL;
addr->pan_id = nla_get_le16(attrs[NL802154_DEV_ADDR_ATTR_PAN_ID]); addr->mode = nla_get_u32(attrs[NL802154_DEV_ADDR_ATTR_MODE]); switch (addr->mode) { case NL802154_DEV_ADDR_SHORT: + if (!attrs[NL802154_DEV_ADDR_ATTR_SHORT]) + return -EINVAL; addr->short_addr = nla_get_le16(attrs[NL802154_DEV_ADDR_ATTR_SHORT]); break; case NL802154_DEV_ADDR_EXTENDED: + if (!attrs[NL802154_DEV_ADDR_ATTR_EXTENDED]) + return -EINVAL; addr->extended_addr = nla_get_le64(attrs[NL802154_DEV_ADDR_ATTR_EXTENDED]); break; default:
From: Luke D Jones luke@ljones.dev
[ Upstream commit 4bfb2c72b2bfca8684c2f5c25a3119bad016a9d3 ]
Older ROG keyboards emit a similar stream of bytes to the new N-Key keyboards and require filtering to prevent a lot of unmapped key warnings showing. As all the ROG keyboards use QUIRK_USE_KBD_BACKLIGHT this is now used to branch to filtering in asus_raw_event.
Signed-off-by: Luke D Jones luke@ljones.dev Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-asus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index 2ab22b925941..1ed1c05c3d54 100644 --- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -335,7 +335,7 @@ static int asus_raw_event(struct hid_device *hdev, if (drvdata->quirks & QUIRK_MEDION_E1239T) return asus_e1239t_event(drvdata, data, size);
- if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) { + if (drvdata->quirks & QUIRK_USE_KBD_BACKLIGHT) { /* * Skip these report ID, the device emits a continuous stream associated * with the AURA mode it is in which looks like an 'echo'.
From: Nirenjan Krishnan nirenjan@gmail.com
[ Upstream commit 25bdbfbb2d8331a67824dd03d0087e9c98835f3a ]
The Saitek X65 joystick has a pair of axes that were used as mouse pointer controls by the Windows driver. The corresponding usage page is the Game Controls page, which is not recognized by the generic HID driver, and therefore, both axes get mapped to ABS_MISC. The quirk makes the second axis get mapped to ABS_MISC+1, and therefore made available separately.
Signed-off-by: Nirenjan Krishnan nirenjan@gmail.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index ba338973e968..1eccdb353ab0 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -1042,6 +1042,7 @@ #define USB_DEVICE_ID_SAITEK_X52 0x075c #define USB_DEVICE_ID_SAITEK_X52_2 0x0255 #define USB_DEVICE_ID_SAITEK_X52_PRO 0x0762 +#define USB_DEVICE_ID_SAITEK_X65 0x0b6a
#define USB_VENDOR_ID_SAMSUNG 0x0419 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 1a9daf03dbfa..df68dd7a4e80 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -158,6 +158,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X52), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X52_2), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X52_PRO), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, + { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X65), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, { HID_USB_DEVICE(USB_VENDOR_ID_SEMICO, USB_DEVICE_ID_SEMICO_USB_KEYKOARD2), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_SEMICO, USB_DEVICE_ID_SEMICO_USB_KEYKOARD), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB), HID_QUIRK_NOGET },
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit ed80bdc4571fae177c44eba0997a0d551fc21e15 ]
Just like the K12A the Dell K15A keyboard-dock has problems with get_feature requests. This sometimes leads to several "failed to fetch feature 8" messages getting logged, after which the touchpad may or may not work.
Just like the K15A these errors are triggered by undocking and docking the tablet.
There also seem to be other problems when undocking and then docking again in quick succession. It seems that in this case the keyboard-controller still retains some power from capacitors and does not go through a power-on-reset leaving it in a confuses state, symptoms of this are:
1. The USB-ids changing to 048d:8910 2. Failure to read the HID descriptors on the second (mouse) USB intf. 3. The touchpad freezing after a while
These problems can all be cleared by undocking the keyboard and waiting a full minute before redocking it. Unfortunately there is nothing we can do about this in the kernel.
Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 1eccdb353ab0..6e25c505f813 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -1153,6 +1153,7 @@ #define USB_DEVICE_ID_SYNAPTICS_DELL_K12A 0x2819 #define USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5_012 0x2968 #define USB_DEVICE_ID_SYNAPTICS_TP_V103 0x5710 +#define USB_DEVICE_ID_SYNAPTICS_DELL_K15A 0x6e21 #define USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1002 0x73f4 #define USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1003 0x73f5 #define USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5 0x81a7 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index df68dd7a4e80..05d3f498fd44 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -177,6 +177,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_QUAD_HD), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_TP_V103), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_DELL_K12A), HID_QUIRK_NO_INIT_REPORTS }, + { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_DELL_K15A), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD), HID_QUIRK_BADPAD }, { HID_USB_DEVICE(USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_TPV, USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8882), HID_QUIRK_NOGET },
From: Mateusz Jończyk mat.jonczyk@o2.pl
[ Upstream commit 9858c74c29e12be5886280725e781cb735b2aca6 ]
This mouse has a horizontal wheel that requires special handling. Without this patch, the horizontal wheel acts like a vertical wheel.
In the output of `hidrd-convert` for this mouse, there is a `Usage (B8h)` field. It corresponds to a byte in packets sent by the device that specifies which wheel generated an input event.
The name "A4TECH" is spelled in all capitals on the company website.
Signed-off-by: Mateusz Jończyk mat.jonczyk@o2.pl Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/Kconfig | 4 ++-- drivers/hid/hid-a4tech.c | 2 ++ drivers/hid/hid-ids.h | 1 + drivers/hid/hid-quirks.c | 1 + 4 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 786b71ef7738..c6a643f4fc5f 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -93,11 +93,11 @@ menu "Special HID drivers" depends on HID
config HID_A4TECH - tristate "A4 tech mice" + tristate "A4TECH mice" depends on HID default !EXPERT help - Support for A4 tech X5 and WOP-35 / Trust 450L mice. + Support for some A4TECH mice with two scroll wheels.
config HID_ACCUTOUCH tristate "Accutouch touch device" diff --git a/drivers/hid/hid-a4tech.c b/drivers/hid/hid-a4tech.c index 3a8c4a5971f7..2cbc32dda7f7 100644 --- a/drivers/hid/hid-a4tech.c +++ b/drivers/hid/hid-a4tech.c @@ -147,6 +147,8 @@ static const struct hid_device_id a4_devices[] = { .driver_data = A4_2WHEEL_MOUSE_HACK_B8 }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_RP_649), .driver_data = A4_2WHEEL_MOUSE_HACK_B8 }, + { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_NB_95), + .driver_data = A4_2WHEEL_MOUSE_HACK_B8 }, { } }; MODULE_DEVICE_TABLE(hid, a4_devices); diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 6e25c505f813..20ac618f0f5b 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -26,6 +26,7 @@ #define USB_DEVICE_ID_A4TECH_WCP32PU 0x0006 #define USB_DEVICE_ID_A4TECH_X5_005D 0x000a #define USB_DEVICE_ID_A4TECH_RP_649 0x001a +#define USB_DEVICE_ID_A4TECH_NB_95 0x022b
#define USB_VENDOR_ID_AASHIMA 0x06d6 #define USB_DEVICE_ID_AASHIMA_GAMEPAD 0x0025 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 05d3f498fd44..2dcb5cb97f79 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -213,6 +213,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_RP_649) }, + { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_NB_95) }, #endif #if IS_ENABLED(CONFIG_HID_ACCUTOUCH) { HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_ACCUTOUCH_2216) },
From: Dmitry Torokhov dmitry.torokhov@gmail.com
[ Upstream commit 7b229b13d78d112e2c5d4a60a3c6f602289959fa ]
HUTRR101 added a new usage code for a key that is supposed to invoke and dismiss an emoji picker widget to assist users to locate and enter emojis.
This patch adds a new key definition KEY_EMOJI_PICKER and maps 0x0c/0x0d9 usage code to this new keycode. Additionally hid-debug is adjusted to recognize this new usage code as well.
Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-debug.c | 1 + drivers/hid/hid-input.c | 3 +++ include/uapi/linux/input-event-codes.h | 1 + 3 files changed, 5 insertions(+)
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c index d7eaf9100370..982737827b87 100644 --- a/drivers/hid/hid-debug.c +++ b/drivers/hid/hid-debug.c @@ -929,6 +929,7 @@ static const char *keys[KEY_MAX + 1] = { [KEY_APPSELECT] = "AppSelect", [KEY_SCREENSAVER] = "ScreenSaver", [KEY_VOICECOMMAND] = "VoiceCommand", + [KEY_EMOJI_PICKER] = "EmojiPicker", [KEY_BRIGHTNESS_MIN] = "BrightnessMin", [KEY_BRIGHTNESS_MAX] = "BrightnessMax", [KEY_BRIGHTNESS_AUTO] = "BrightnessAuto", diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 236bccd37760..e982d8173c9c 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -963,6 +963,9 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
case 0x0cd: map_key_clear(KEY_PLAYPAUSE); break; case 0x0cf: map_key_clear(KEY_VOICECOMMAND); break; + + case 0x0d9: map_key_clear(KEY_EMOJI_PICKER); break; + case 0x0e0: map_abs_clear(ABS_VOLUME); break; case 0x0e2: map_key_clear(KEY_MUTE); break; case 0x0e5: map_key_clear(KEY_BASSBOOST); break; diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h index ee93428ced9a..225ec87d4f22 100644 --- a/include/uapi/linux/input-event-codes.h +++ b/include/uapi/linux/input-event-codes.h @@ -611,6 +611,7 @@ #define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */ #define KEY_ASSISTANT 0x247 /* AL Context-aware desktop assistant */ #define KEY_KBD_LAYOUT_NEXT 0x248 /* AC Next Keyboard Layout Select */ +#define KEY_EMOJI_PICKER 0x249 /* Show/hide emoji picker (HUTRR101) */
#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ #define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
From: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com
[ Upstream commit edb032033da0dc850f6e7740fa1023c73195bc89 ]
In the function sensor_hub_set_feature(), return error when hid_set_field() fails.
Signed-off-by: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com Acked-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-sensor-hub.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index 3dd7d3246737..f9983145d4e7 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -210,16 +210,21 @@ int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, buffer_size = buffer_size / sizeof(__s32); if (buffer_size) { for (i = 0; i < buffer_size; ++i) { - hid_set_field(report->field[field_index], i, - (__force __s32)cpu_to_le32(*buf32)); + ret = hid_set_field(report->field[field_index], i, + (__force __s32)cpu_to_le32(*buf32)); + if (ret) + goto done_proc; + ++buf32; } } if (remaining_bytes) { value = 0; memcpy(&value, (u8 *)buf32, remaining_bytes); - hid_set_field(report->field[field_index], i, - (__force __s32)cpu_to_le32(value)); + ret = hid_set_field(report->field[field_index], i, + (__force __s32)cpu_to_le32(value)); + if (ret) + goto done_proc; } hid_hw_request(hsdev->hdev, report, HID_REQ_SET_REPORT); hid_hw_wait(hsdev->hdev);
From: Luke D Jones luke@ljones.dev
[ Upstream commit c980512b4512adf2c6f9edb948ce19423b23124d ]
The G713 and G733 both emit an unexpected keycode on some key presses such as Fn+Pause. The device in this case is emitting two events on key down, and 3 on key up, the third key up event is report ID 0x02 and is unfiltered, causing incorrect event.
This patch filters out the single problematic event.
Signed-off-by: Luke D Jones luke@ljones.dev Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-asus.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index 1ed1c05c3d54..60606c11bdaf 100644 --- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -355,6 +355,16 @@ static int asus_raw_event(struct hid_device *hdev, return -1; } } + if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) { + /* + * G713 and G733 send these codes on some keypresses, depending on + * the key pressed it can trigger a shutdown event if not caught. + */ + if(data[0] == 0x02 && data[1] == 0x30) { + return -1; + } + } + }
return 0;
From: Saeed Mirzamohammadi saeed.mirzamohammadi@oracle.com
[ Upstream commit 3b2520076822f15621509a6da3bc4a8636cd33b4 ]
The Lenovo optical mouse with vendor id of 0x17ef and product id of 0x600e experiences disconnecting issues every 55 seconds:
[38565.706242] usb 1-1.4: Product: Lenovo Optical Mouse [38565.728603] input: Lenovo Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:17EF:600E.029A/input/input665 [38565.755949] hid-generic 0003:17EF:600E.029A: input,hidraw1: USB HID v1.11 Mouse [Lenovo Optical Mouse] on usb-0000:01:00.0-1.4/input0 [38619.360692] usb 1-1.4: USB disconnect, device number 48 [38620.864990] usb 1-1.4: new low-speed USB device number 49 using xhci_hcd [38620.984011] usb 1-1.4: New USB device found, idVendor=17ef,idProduct=600e, bcdDevice= 1.00 [38620.998117] usb 1-1.4: New USB device strings: Mfr=0, Product=2,SerialNumber=0
This adds HID_QUIRK_ALWAYS_POLL for this device in order to work properly.
Signed-off-by: Saeed Mirzamohammadi saeed.mirzamohammadi@oracle.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 20ac618f0f5b..03978111d944 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -750,6 +750,7 @@ #define USB_DEVICE_ID_LENOVO_X1_COVER 0x6085 #define USB_DEVICE_ID_LENOVO_X1_TAB 0x60a3 #define USB_DEVICE_ID_LENOVO_X1_TAB3 0x60b5 +#define USB_DEVICE_ID_LENOVO_OPTICAL_USB_MOUSE_600E 0x600e #define USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_608D 0x608d #define USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_6019 0x6019 #define USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_602E 0x602e diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 2dcb5cb97f79..bb2b60bc618f 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -110,6 +110,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_PENSKETCH_M912), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M406XE), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_PIXART_USB_OPTICAL_MOUSE_ID2), HID_QUIRK_ALWAYS_POLL }, + { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_OPTICAL_USB_MOUSE_600E), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_608D), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_6019), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_602E), HID_QUIRK_ALWAYS_POLL },
From: Ahelenia Ziemiańska nabijaczleweli@nabijaczleweli.xyz
[ Upstream commit bc8b796f618c3ccb0a2a8ed1e96c00a1a7849415 ]
This re-adds the suffix to Win8 stylus-on-touchscreen devices, now that they aren't erroneously marked as MT
Signed-off-by: Ahelenia Ziemiańska nabijaczleweli@nabijaczleweli.xyz Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-multitouch.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 9d9f3e1bd5f4..ae1fee9d7474 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -1576,13 +1576,13 @@ static int mt_input_configured(struct hid_device *hdev, struct hid_input *hi) /* we do not set suffix = "Touchscreen" */ hi->input->name = hdev->name; break; - case HID_DG_STYLUS: - /* force BTN_STYLUS to allow tablet matching in udev */ - __set_bit(BTN_STYLUS, hi->input->keybit); - break; case HID_VD_ASUS_CUSTOM_MEDIA_KEYS: suffix = "Custom Media Keys"; break; + case HID_DG_STYLUS: + /* force BTN_STYLUS to allow tablet matching in udev */ + __set_bit(BTN_STYLUS, hi->input->keybit); + fallthrough; case HID_DG_PEN: suffix = "Stylus"; break;
From: Mark Bolhuis mark@bolhuis.dev
[ Upstream commit 48e33befe61a7d407753c53d1a06fc8d6b5dab80 ]
Add BUS_VIRTUAL to hid_connect logging since it's a valid hid bus type and it should not print <UNKNOWN>
Signed-off-by: Mark Bolhuis mark@bolhuis.dev Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-core.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 097cb1ee3126..0f69f35f2957 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -2005,6 +2005,9 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask) case BUS_I2C: bus = "I2C"; break; + case BUS_VIRTUAL: + bus = "VIRTUAL"; + break; default: bus = "<UNKNOWN>"; }
From: Anirudh Rayabharam mail@anirudhrb.com
[ Upstream commit 6be388f4a35d2ce5ef7dbf635a8964a5da7f799f ]
In hid_submit_ctrl(), the way of calculating the report length doesn't take into account that report->size can be zero. When running the syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to calculate transfer_buffer_length as 16384. When this urb is passed to the usb core layer, KMSAN reports an info leak of 16384 bytes.
To fix this, first modify hid_report_len() to account for the zero report size case by using DIV_ROUND_UP for the division. Then, call it from hid_submit_ctrl().
Reported-by: syzbot+7c2bb71996f95a82524c@syzkaller.appspotmail.com Signed-off-by: Anirudh Rayabharam mail@anirudhrb.com Acked-by: Benjamin Tissoires benjamin.tissoires@redhat.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/usbhid/hid-core.c | 2 +- include/linux/hid.h | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 86257ce6d619..4e9077363c96 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -374,7 +374,7 @@ static int hid_submit_ctrl(struct hid_device *hid) raw_report = usbhid->ctrl[usbhid->ctrltail].raw_report; dir = usbhid->ctrl[usbhid->ctrltail].dir;
- len = ((report->size - 1) >> 3) + 1 + (report->id > 0); + len = hid_report_len(report); if (dir == USB_DIR_OUT) { usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0); usbhid->urbctrl->transfer_buffer_length = len; diff --git a/include/linux/hid.h b/include/linux/hid.h index 3e33eb14118c..5e79a21c696f 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -1164,8 +1164,7 @@ static inline void hid_hw_wait(struct hid_device *hdev) */ static inline u32 hid_report_len(struct hid_report *report) { - /* equivalent to DIV_ROUND_UP(report->size, 8) + !!(report->id > 0) */ - return ((report->size - 1) >> 3) + 1 + (report->id > 0); + return DIV_ROUND_UP(report->size, 8) + (report->id > 0); }
int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size,
From: Felix Fietkau nbd@nbd.name
[ Upstream commit 94bb18b03d43f32e9440e8e350b7f533137c40f6 ]
The hardware can only handle 64 subframes in rx direction and 128 for tx. Improves throughput with APs that can handle more than that
Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20210507100211.15709-2-nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7921/init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c b/drivers/net/wireless/mediatek/mt76/mt7921/init.c index 89a13b4a74a4..c0001e38fcce 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c +++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c @@ -74,8 +74,8 @@ mt7921_init_wiphy(struct ieee80211_hw *hw) struct wiphy *wiphy = hw->wiphy;
hw->queues = 4; - hw->max_rx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF; - hw->max_tx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF; + hw->max_rx_aggregation_subframes = 64; + hw->max_tx_aggregation_subframes = 128;
phy->slottime = 9;
From: "Pavel Machek (CIP)" pavel@denx.de
[ Upstream commit 73a395c46704304b96bc5e2ee19be31124025c0c ]
It's theoretically possible for the runtime PM reference to leak if the code fails anywhere between the pm_runtime_resume_and_get() and pm_runtime_put() calls, so make sure to release the runtime PM reference in that case.
Practically this will never happen because none of the functions will fail on Tegra, but it's better for the code to be pedantic in case these assumptions will ever become wrong.
Signed-off-by: Pavel Machek (CIP) pavel@denx.de [treding@nvidia.com: add commit message] Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/tegra/sor.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c index 7b88261f57bb..67a80dae1c00 100644 --- a/drivers/gpu/drm/tegra/sor.c +++ b/drivers/gpu/drm/tegra/sor.c @@ -3125,21 +3125,21 @@ static int tegra_sor_init(struct host1x_client *client) if (err < 0) { dev_err(sor->dev, "failed to acquire SOR reset: %d\n", err); - return err; + goto rpm_put; }
err = reset_control_assert(sor->rst); if (err < 0) { dev_err(sor->dev, "failed to assert SOR reset: %d\n", err); - return err; + goto rpm_put; } }
err = clk_prepare_enable(sor->clk); if (err < 0) { dev_err(sor->dev, "failed to enable clock: %d\n", err); - return err; + goto rpm_put; }
usleep_range(1000, 3000); @@ -3150,7 +3150,7 @@ static int tegra_sor_init(struct host1x_client *client) dev_err(sor->dev, "failed to deassert SOR reset: %d\n", err); clk_disable_unprepare(sor->clk); - return err; + goto rpm_put; }
reset_control_release(sor->rst); @@ -3171,6 +3171,12 @@ static int tegra_sor_init(struct host1x_client *client) }
return 0; + +rpm_put: + if (sor->rst) + pm_runtime_put(sor->dev); + + return err; }
static int tegra_sor_exit(struct host1x_client *client)
From: Thierry Reding treding@nvidia.com
[ Upstream commit 0cfe5a6e758fb20be8ad3e8f10cb087cc8033eeb ]
In some cases we may need to initialize the host1x client first before registering it. This commit adds a new helper that will do nothing but the initialization of the data structure.
At the same time, the initialization is removed from the registration function. Note, however, that for simplicity we explicitly initialize the client when the host1x_client_register() function is called, as opposed to the low-level __host1x_client_register() function. This allows existing callers to remain unchanged.
Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/host1x/bus.c | 30 ++++++++++++++++++++++++------ include/linux/host1x.h | 30 ++++++++++++++++++++++++------ 2 files changed, 48 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/host1x/bus.c b/drivers/gpu/host1x/bus.c index 68a766ff0e9d..b98d746141a8 100644 --- a/drivers/gpu/host1x/bus.c +++ b/drivers/gpu/host1x/bus.c @@ -704,6 +704,29 @@ void host1x_driver_unregister(struct host1x_driver *driver) } EXPORT_SYMBOL(host1x_driver_unregister);
+/** + * __host1x_client_init() - initialize a host1x client + * @client: host1x client + * @key: lock class key for the client-specific mutex + */ +void __host1x_client_init(struct host1x_client *client, struct lock_class_key *key) +{ + INIT_LIST_HEAD(&client->list); + __mutex_init(&client->lock, "host1x client lock", key); + client->usecount = 0; +} +EXPORT_SYMBOL(__host1x_client_init); + +/** + * host1x_client_exit() - uninitialize a host1x client + * @client: host1x client + */ +void host1x_client_exit(struct host1x_client *client) +{ + mutex_destroy(&client->lock); +} +EXPORT_SYMBOL(host1x_client_exit); + /** * __host1x_client_register() - register a host1x client * @client: host1x client @@ -716,16 +739,11 @@ EXPORT_SYMBOL(host1x_driver_unregister); * device and call host1x_device_init(), which will in turn call each client's * &host1x_client_ops.init implementation. */ -int __host1x_client_register(struct host1x_client *client, - struct lock_class_key *key) +int __host1x_client_register(struct host1x_client *client) { struct host1x *host1x; int err;
- INIT_LIST_HEAD(&client->list); - __mutex_init(&client->lock, "host1x client lock", key); - client->usecount = 0; - mutex_lock(&devices_lock);
list_for_each_entry(host1x, &devices, list) { diff --git a/include/linux/host1x.h b/include/linux/host1x.h index 9eb77c87a83b..ed0005ce4285 100644 --- a/include/linux/host1x.h +++ b/include/linux/host1x.h @@ -320,12 +320,30 @@ static inline struct host1x_device *to_host1x_device(struct device *dev) int host1x_device_init(struct host1x_device *device); int host1x_device_exit(struct host1x_device *device);
-int __host1x_client_register(struct host1x_client *client, - struct lock_class_key *key); -#define host1x_client_register(class) \ - ({ \ - static struct lock_class_key __key; \ - __host1x_client_register(class, &__key); \ +void __host1x_client_init(struct host1x_client *client, struct lock_class_key *key); +void host1x_client_exit(struct host1x_client *client); + +#define host1x_client_init(client) \ + ({ \ + static struct lock_class_key __key; \ + __host1x_client_init(client, &__key); \ + }) + +int __host1x_client_register(struct host1x_client *client); + +/* + * Note that this wrapper calls __host1x_client_init() for compatibility + * with existing callers. Callers that want to separately initialize and + * register a host1x client must first initialize using either of the + * __host1x_client_init() or host1x_client_init() functions and then use + * the low-level __host1x_client_register() function to avoid the client + * getting reinitialized. + */ +#define host1x_client_register(client) \ + ({ \ + static struct lock_class_key __key; \ + __host1x_client_init(client, &__key); \ + __host1x_client_register(client); \ })
int host1x_client_unregister(struct host1x_client *client);
From: Thierry Reding treding@nvidia.com
[ Upstream commit 5dea42759bcef74b0802ea64b904409bc37f9045 ]
Before registering the SOR host1x client, make sure that it is fully initialized. This avoids a potential race condition between the SOR's probe and the host1x device initialization in cases where the SOR is the final sub-device to register to a host1x instance.
Reported-by: Jonathan Hunter jonathanh@nvidia.com Signed-off-by: Thierry Reding treding@nvidia.com Tested-by: Jon Hunter jonathanh@nvidia.com Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/tegra/sor.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c index 67a80dae1c00..32c83f2e386c 100644 --- a/drivers/gpu/drm/tegra/sor.c +++ b/drivers/gpu/drm/tegra/sor.c @@ -3922,17 +3922,10 @@ static int tegra_sor_probe(struct platform_device *pdev) platform_set_drvdata(pdev, sor); pm_runtime_enable(&pdev->dev);
- INIT_LIST_HEAD(&sor->client.list); + host1x_client_init(&sor->client); sor->client.ops = &sor_client_ops; sor->client.dev = &pdev->dev;
- err = host1x_client_register(&sor->client); - if (err < 0) { - dev_err(&pdev->dev, "failed to register host1x client: %d\n", - err); - goto rpm_disable; - } - /* * On Tegra210 and earlier, provide our own implementation for the * pad output clock. @@ -3944,13 +3937,13 @@ static int tegra_sor_probe(struct platform_device *pdev) sor->index); if (!name) { err = -ENOMEM; - goto unregister; + goto uninit; }
err = host1x_client_resume(&sor->client); if (err < 0) { dev_err(sor->dev, "failed to resume: %d\n", err); - goto unregister; + goto uninit; }
sor->clk_pad = tegra_clk_sor_pad_register(sor, name); @@ -3961,14 +3954,20 @@ static int tegra_sor_probe(struct platform_device *pdev) err = PTR_ERR(sor->clk_pad); dev_err(sor->dev, "failed to register SOR pad clock: %d\n", err); - goto unregister; + goto uninit; + } + + err = __host1x_client_register(&sor->client); + if (err < 0) { + dev_err(&pdev->dev, "failed to register host1x client: %d\n", + err); + goto uninit; }
return 0;
-unregister: - host1x_client_unregister(&sor->client); -rpm_disable: +uninit: + host1x_client_exit(&sor->client); pm_runtime_disable(&pdev->dev); remove: tegra_output_remove(&sor->output);
From: Chu Lin linchuyuan@google.com
[ Upstream commit f0fb26c456a30d6009faa2c9d44aa22f5bf88c90 ]
The PMBUS_MFR_ID block is actually 6 chars for q54sj108a2. /sys/bus/i2c/drivers/q54sj108a2_test# iotools smbus_read8 $BUS $ADDR 0x99 0x06
Tested: Devices are able to bind to the q54sj108a2 driver successfully.
Signed-off-by: Chu Lin linchuyuan@google.com Link: https://lore.kernel.org/r/20210517222606.3457594-1-linchuyuan@google.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/pmbus/q54sj108a2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/pmbus/q54sj108a2.c b/drivers/hwmon/pmbus/q54sj108a2.c index aec512766c31..0976268b2670 100644 --- a/drivers/hwmon/pmbus/q54sj108a2.c +++ b/drivers/hwmon/pmbus/q54sj108a2.c @@ -299,7 +299,7 @@ static int q54sj108a2_probe(struct i2c_client *client) dev_err(&client->dev, "Failed to read Manufacturer ID\n"); return ret; } - if (ret != 5 || strncmp(buf, "DELTA", 5)) { + if (ret != 6 || strncmp(buf, "DELTA", 5)) { buf[ret] = '\0'; dev_err(dev, "Unsupported Manufacturer ID '%s'\n", buf); return -ENODEV;
From: Maciej Falkowski maciej.falkowski9@gmail.com
[ Upstream commit 3c4e0147c269738a19c7d70cd32395600bcc0714 ]
The current control flow of IRQ number assignment to `irq` variable allows a request of IRQ of unspecified value, generating a warning under Clang compilation with omap1_defconfig on linux-next:
arch/arm/mach-omap1/pm.c:656:11: warning: variable 'irq' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] else if (cpu_is_omap16xx()) ^~~~~~~~~~~~~~~~~ ./arch/arm/mach-omap1/include/mach/soc.h:123:30: note: expanded from macro 'cpu_is_omap16xx' ^~~~~~~~~~~~~ arch/arm/mach-omap1/pm.c:658:18: note: uninitialized use occurs here if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", ^~~ arch/arm/mach-omap1/pm.c:656:7: note: remove the 'if' if its condition is always true else if (cpu_is_omap16xx()) ^~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-omap1/pm.c:611:9: note: initialize the variable 'irq' to silence this warning int irq; ^ = 0 1 warning generated.
The patch provides a default value to the `irq` variable along with a validity check.
Signed-off-by: Maciej Falkowski maciej.falkowski9@gmail.com Link: https://github.com/ClangBuiltLinux/linux/issues/1324 Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-omap1/pm.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 2c1e2b32b9b3..a745d64d4699 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -655,9 +655,13 @@ static int __init omap_pm_init(void) irq = INT_7XX_WAKE_UP_REQ; else if (cpu_is_omap16xx()) irq = INT_1610_WAKE_UP_REQ; - if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", - NULL)) - pr_err("Failed to request irq %d (peripheral wakeup)\n", irq); + else + irq = -1; + + if (irq >= 0) { + if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", NULL)) + pr_err("Failed to request irq %d (peripheral wakeup)\n", irq); + }
/* Program new power ramp-up time * (0 for most boards since we don't lower voltage when in deep sleep)
From: Yongqiang Liu liuyongqiang13@huawei.com
[ Upstream commit 040ab72ee10ea88e1883ad143b3e2b77596abc31 ]
GCC reports the following warning with W=1:
arch/arm/mach-omap2/board-n8x0.c:325:19: warning: variable 'index' set but not used [-Wunused-but-set-variable] 325 | int bit, *openp, index; | ^~~~~
Fix this by moving CONFIG_MMC_OMAP to cover the rest codes in the n8x0_mmc_callback().
Signed-off-by: Yongqiang Liu liuyongqiang13@huawei.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-omap2/board-n8x0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 418a61ecb827..5e86145db0e2 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -322,6 +322,7 @@ static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
static void n8x0_mmc_callback(void *data, u8 card_mask) { +#ifdef CONFIG_MMC_OMAP int bit, *openp, index;
if (board_is_n800()) { @@ -339,7 +340,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask) else *openp = 0;
-#ifdef CONFIG_MMC_OMAP omap_mmc_notify_cover_event(mmc_device, index, *openp); #else pr_warn("MMC: notify cover event not available\n");
From: Andreas Gruenbacher agruenba@redhat.com
[ Upstream commit 43a511c44e58e357a687d61a20cf5ef1dc9e5a7c ]
When a direct I/O write falls entirely and falls back to buffered I/O and the buffered I/O fails, the write failed with return value 0 instead of the error number reported by the buffered I/O. Fix that.
Signed-off-by: Andreas Gruenbacher agruenba@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/gfs2/file.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c index 2d500f90cdac..a86e6810237a 100644 --- a/fs/gfs2/file.c +++ b/fs/gfs2/file.c @@ -935,8 +935,11 @@ static ssize_t gfs2_file_write_iter(struct kiocb *iocb, struct iov_iter *from) current->backing_dev_info = inode_to_bdi(inode); buffered = iomap_file_buffered_write(iocb, from, &gfs2_iomap_ops); current->backing_dev_info = NULL; - if (unlikely(buffered <= 0)) + if (unlikely(buffered <= 0)) { + if (!ret) + ret = buffered; goto out_unlock; + }
/* * We need to ensure that the page cache pages are written to
From: Bob Peterson rpeterso@redhat.com
[ Upstream commit 865cc3e9cc0b1d4b81c10d53174bced76decf888 ]
Before this patch, gfs2 would deadlock because of the following sequence during mount:
mount gfs2_fill_super gfs2_make_fs_rw <--- Detects IO error with glock kthread_stop(sdp->sd_quotad_process); <--- Blocked waiting for quotad to finish
logd Detects IO error and the need to withdraw calls gfs2_withdraw gfs2_make_fs_ro kthread_stop(sdp->sd_quotad_process); <--- Blocked waiting for quotad to finish
gfs2_quotad gfs2_statfs_sync gfs2_glock_wait <---- Blocked waiting for statfs glock to be granted
glock_work_func do_xmote <---Detects IO error, can't release glock: blocked on withdraw glops->go_inval glock_blocked_by_withdraw requeue glock work & exit <--- work requeued, blocked by withdraw
This patch makes a special exception for the statfs system inode glock, which allows the statfs glock UNLOCK to proceed normally. That allows the quotad daemon to exit during the withdraw, which allows the logd daemon to exit during the withdraw, which allows the mount to exit.
Signed-off-by: Bob Peterson rpeterso@redhat.com Signed-off-by: Andreas Gruenbacher agruenba@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/gfs2/glock.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-)
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index 9567520d79f7..142f746d7b33 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -583,6 +583,16 @@ static void finish_xmote(struct gfs2_glock *gl, unsigned int ret) spin_unlock(&gl->gl_lockref.lock); }
+static bool is_system_glock(struct gfs2_glock *gl) +{ + struct gfs2_sbd *sdp = gl->gl_name.ln_sbd; + struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode); + + if (gl == m_ip->i_gl) + return true; + return false; +} + /** * do_xmote - Calls the DLM to change the state of a lock * @gl: The lock state @@ -672,17 +682,25 @@ __acquires(&gl->gl_lockref.lock) * to see sd_log_error and withdraw, and in the meantime, requeue the * work for later. * + * We make a special exception for some system glocks, such as the + * system statfs inode glock, which needs to be granted before the + * gfs2_quotad daemon can exit, and that exit needs to finish before + * we can unmount the withdrawn file system. + * * However, if we're just unlocking the lock (say, for unmount, when * gfs2_gl_hash_clear calls clear_glock) and recovery is complete * then it's okay to tell dlm to unlock it. */ if (unlikely(sdp->sd_log_error && !gfs2_withdrawn(sdp))) gfs2_withdraw_delayed(sdp); - if (glock_blocked_by_withdraw(gl)) { - if (target != LM_ST_UNLOCKED || - test_bit(SDF_WITHDRAW_RECOVERY, &sdp->sd_flags)) { + if (glock_blocked_by_withdraw(gl) && + (target != LM_ST_UNLOCKED || + test_bit(SDF_WITHDRAW_RECOVERY, &sdp->sd_flags))) { + if (!is_system_glock(gl)) { gfs2_glock_queue_work(gl, GL_GLOCK_DFT_HOLD); goto out; + } else { + clear_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags); } }
From: Bob Peterson rpeterso@redhat.com
[ Upstream commit f5456b5d67cf812fd31fe3e130ca216b2e0908e5 ]
Before this patch, the system ail lists were cleaned up if the logd process withdrew, but on other withdraws, they were not cleaned up. This included the cleaning up of the revokes as well.
This patch reorganizes things a bit so that all withdraws (not just logd) clean up the ail lists, including any pending revokes.
Signed-off-by: Bob Peterson rpeterso@redhat.com Signed-off-by: Andreas Gruenbacher agruenba@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/gfs2/log.c | 6 +++--- fs/gfs2/log.h | 1 + fs/gfs2/lops.c | 7 ++++++- fs/gfs2/lops.h | 1 + fs/gfs2/util.c | 1 + 5 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c index 6410281546f9..47287a7056fe 100644 --- a/fs/gfs2/log.c +++ b/fs/gfs2/log.c @@ -923,10 +923,10 @@ static void log_write_header(struct gfs2_sbd *sdp, u32 flags) }
/** - * ail_drain - drain the ail lists after a withdraw + * gfs2_ail_drain - drain the ail lists after a withdraw * @sdp: Pointer to GFS2 superblock */ -static void ail_drain(struct gfs2_sbd *sdp) +void gfs2_ail_drain(struct gfs2_sbd *sdp) { struct gfs2_trans *tr;
@@ -953,6 +953,7 @@ static void ail_drain(struct gfs2_sbd *sdp) list_del(&tr->tr_list); gfs2_trans_free(sdp, tr); } + gfs2_drain_revokes(sdp); spin_unlock(&sdp->sd_ail_lock); }
@@ -1159,7 +1160,6 @@ void gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl, u32 flags) if (tr && list_empty(&tr->tr_list)) list_add(&tr->tr_list, &sdp->sd_ail1_list); spin_unlock(&sdp->sd_ail_lock); - ail_drain(sdp); /* frees all transactions */ tr = NULL; goto out_end; } diff --git a/fs/gfs2/log.h b/fs/gfs2/log.h index eea58015710e..fc905c2af53c 100644 --- a/fs/gfs2/log.h +++ b/fs/gfs2/log.h @@ -93,5 +93,6 @@ extern int gfs2_logd(void *data); extern void gfs2_add_revoke(struct gfs2_sbd *sdp, struct gfs2_bufdata *bd); extern void gfs2_glock_remove_revoke(struct gfs2_glock *gl); extern void gfs2_flush_revokes(struct gfs2_sbd *sdp); +extern void gfs2_ail_drain(struct gfs2_sbd *sdp);
#endif /* __LOG_DOT_H__ */ diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c index a82f4747aa8d..ef44d325e518 100644 --- a/fs/gfs2/lops.c +++ b/fs/gfs2/lops.c @@ -882,7 +882,7 @@ static void revoke_lo_before_commit(struct gfs2_sbd *sdp, struct gfs2_trans *tr) gfs2_log_write_page(sdp, page); }
-static void revoke_lo_after_commit(struct gfs2_sbd *sdp, struct gfs2_trans *tr) +void gfs2_drain_revokes(struct gfs2_sbd *sdp) { struct list_head *head = &sdp->sd_log_revokes; struct gfs2_bufdata *bd; @@ -897,6 +897,11 @@ static void revoke_lo_after_commit(struct gfs2_sbd *sdp, struct gfs2_trans *tr) } }
+static void revoke_lo_after_commit(struct gfs2_sbd *sdp, struct gfs2_trans *tr) +{ + gfs2_drain_revokes(sdp); +} + static void revoke_lo_before_scan(struct gfs2_jdesc *jd, struct gfs2_log_header_host *head, int pass) { diff --git a/fs/gfs2/lops.h b/fs/gfs2/lops.h index 31b6dd0d2e5d..f707601597dc 100644 --- a/fs/gfs2/lops.h +++ b/fs/gfs2/lops.h @@ -20,6 +20,7 @@ extern void gfs2_log_submit_bio(struct bio **biop, int opf); extern void gfs2_pin(struct gfs2_sbd *sdp, struct buffer_head *bh); extern int gfs2_find_jhead(struct gfs2_jdesc *jd, struct gfs2_log_header_host *head, bool keep_cache); +extern void gfs2_drain_revokes(struct gfs2_sbd *sdp); static inline unsigned int buf_limit(struct gfs2_sbd *sdp) { return sdp->sd_ldptrs; diff --git a/fs/gfs2/util.c b/fs/gfs2/util.c index 4f034b87b427..cffb346fb9b3 100644 --- a/fs/gfs2/util.c +++ b/fs/gfs2/util.c @@ -130,6 +130,7 @@ static void signal_our_withdraw(struct gfs2_sbd *sdp) if (test_bit(SDF_NORECOVERY, &sdp->sd_flags) || !sdp->sd_jdesc) return;
+ gfs2_ail_drain(sdp); /* frees all transactions */ inode = sdp->sd_jdesc->jd_inode; ip = GFS2_I(inode); i_gl = ip->i_gl;
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 31a4cf1d223dc6144d2e7c679cc3a98f84a1607b ]
The Asus T101HA has a problem with spurious wakeups when the lid is closed, this is caused by the screen sitting so close to the touchpad that the touchpad ends up reporting touch events, causing these wakeups.
Add a quirk which disables event reporting on suspend when set, and enable this quirk for the Asus T101HA touchpad fixing the spurious wakeups, while still allowing the device to be woken by pressing a key on the keyboard (which is part of the same USB device).
Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-multitouch.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index ae1fee9d7474..6bc49fb53d74 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -70,6 +70,7 @@ MODULE_LICENSE("GPL"); #define MT_QUIRK_WIN8_PTP_BUTTONS BIT(18) #define MT_QUIRK_SEPARATE_APP_REPORT BIT(19) #define MT_QUIRK_FORCE_MULTI_INPUT BIT(20) +#define MT_QUIRK_DISABLE_WAKEUP BIT(21)
#define MT_INPUTMODE_TOUCHSCREEN 0x02 #define MT_INPUTMODE_TOUCHPAD 0x03 @@ -191,6 +192,7 @@ static void mt_post_parse(struct mt_device *td, struct mt_application *app); #define MT_CLS_EXPORT_ALL_INPUTS 0x0013 /* reserved 0x0014 */ #define MT_CLS_WIN_8_FORCE_MULTI_INPUT 0x0015 +#define MT_CLS_WIN_8_DISABLE_WAKEUP 0x0016
/* vendor specific classes */ #define MT_CLS_3M 0x0101 @@ -283,6 +285,15 @@ static const struct mt_class mt_classes[] = { MT_QUIRK_WIN8_PTP_BUTTONS | MT_QUIRK_FORCE_MULTI_INPUT, .export_all_inputs = true }, + { .name = MT_CLS_WIN_8_DISABLE_WAKEUP, + .quirks = MT_QUIRK_ALWAYS_VALID | + MT_QUIRK_IGNORE_DUPLICATES | + MT_QUIRK_HOVERING | + MT_QUIRK_CONTACT_CNT_ACCURATE | + MT_QUIRK_STICKY_FINGERS | + MT_QUIRK_WIN8_PTP_BUTTONS | + MT_QUIRK_DISABLE_WAKEUP, + .export_all_inputs = true },
/* * vendor specific classes @@ -759,7 +770,8 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi, return 1; case HID_DG_CONFIDENCE: if ((cls->name == MT_CLS_WIN_8 || - cls->name == MT_CLS_WIN_8_FORCE_MULTI_INPUT) && + cls->name == MT_CLS_WIN_8_FORCE_MULTI_INPUT || + cls->name == MT_CLS_WIN_8_DISABLE_WAKEUP) && (field->application == HID_DG_TOUCHPAD || field->application == HID_DG_TOUCHSCREEN)) app->quirks |= MT_QUIRK_CONFIDENCE; @@ -1749,8 +1761,14 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) #ifdef CONFIG_PM static int mt_suspend(struct hid_device *hdev, pm_message_t state) { + struct mt_device *td = hid_get_drvdata(hdev); + /* High latency is desirable for power savings during S3/S0ix */ - mt_set_modes(hdev, HID_LATENCY_HIGH, true, true); + if (td->mtclass.quirks & MT_QUIRK_DISABLE_WAKEUP) + mt_set_modes(hdev, HID_LATENCY_HIGH, false, false); + else + mt_set_modes(hdev, HID_LATENCY_HIGH, true, true); + return 0; }
@@ -1809,6 +1827,12 @@ static const struct hid_device_id mt_devices[] = { MT_USB_DEVICE(USB_VENDOR_ID_ANTON, USB_DEVICE_ID_ANTON_TOUCH_PAD) },
+ /* Asus T101HA */ + { .driver_data = MT_CLS_WIN_8_DISABLE_WAKEUP, + HID_DEVICE(BUS_USB, HID_GROUP_MULTITOUCH_WIN_8, + USB_VENDOR_ID_ASUSTEK, + USB_DEVICE_ID_ASUSTEK_T101HA_KEYBOARD) }, + /* Asus T304UA */ { .driver_data = MT_CLS_ASUS, HID_DEVICE(BUS_USB, HID_GROUP_MULTITOUCH_WIN_8,
From: Bixuan Cui cuibixuan@huawei.com
[ Upstream commit a4b494099ad657f1cb85436d333cf38870ee95bc ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.
Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Bixuan Cui cuibixuan@huawei.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-gt683r.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/hid/hid-gt683r.c b/drivers/hid/hid-gt683r.c index 898871c8c768..29ccb0accfba 100644 --- a/drivers/hid/hid-gt683r.c +++ b/drivers/hid/hid-gt683r.c @@ -54,6 +54,7 @@ static const struct hid_device_id gt683r_led_id[] = { { HID_USB_DEVICE(USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL) }, { } }; +MODULE_DEVICE_TABLE(hid, gt683r_led_id);
static void gt683r_brightness_set(struct led_classdev *led_cdev, enum led_brightness brightness)
From: Ye Xiang xiang.ye@intel.com
[ Upstream commit 22db5e0003e1441cd829180cebb42f7a6b7a46b7 ]
Add Alder Lake PCI device IDs to the supported device list.
Signed-off-by: Ye Xiang xiang.ye@intel.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/intel-ish-hid/ipc/hw-ish.h | 2 ++ drivers/hid/intel-ish-hid/ipc/pci-ish.c | 2 ++ 2 files changed, 4 insertions(+)
diff --git a/drivers/hid/intel-ish-hid/ipc/hw-ish.h b/drivers/hid/intel-ish-hid/ipc/hw-ish.h index 21b87e4003af..07e3cbc86bef 100644 --- a/drivers/hid/intel-ish-hid/ipc/hw-ish.h +++ b/drivers/hid/intel-ish-hid/ipc/hw-ish.h @@ -28,6 +28,8 @@ #define EHL_Ax_DEVICE_ID 0x4BB3 #define TGL_LP_DEVICE_ID 0xA0FC #define TGL_H_DEVICE_ID 0x43FC +#define ADL_S_DEVICE_ID 0x7AF8 +#define ADL_P_DEVICE_ID 0x51FC
#define REVISION_ID_CHT_A0 0x6 #define REVISION_ID_CHT_Ax_SI 0x0 diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c index 06081cf9b85a..a6d5173ac003 100644 --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c @@ -39,6 +39,8 @@ static const struct pci_device_id ish_pci_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_INTEL, EHL_Ax_DEVICE_ID)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, TGL_LP_DEVICE_ID)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, TGL_H_DEVICE_ID)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, ADL_S_DEVICE_ID)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, ADL_P_DEVICE_ID)}, {0, } }; MODULE_DEVICE_TABLE(pci, ish_pci_tbl);
From: Khem Raj raj.khem@gmail.com
[ Upstream commit ec3a5cb61146c91f0f7dcec8b7e7157a4879a9ee ]
lld does not implement the RISCV relaxation optimizations like GNU ld therefore disable it when building with lld, Also pass it to assembler when using external GNU assembler ( LLVM_IAS != 1 ), this ensures that relevant assembler option is also enabled along. if these options are not used then we see following relocations in objects
0000000000000000 R_RISCV_ALIGN *ABS*+0x0000000000000002
These are then rejected by lld ld.lld: error: capability.c:(.fixup+0x0): relocation R_RISCV_ALIGN requires unimplemented linker relaxation; recompile with -mno-relax but the .o is already compiled with -mno-relax
Signed-off-by: Khem Raj raj.khem@gmail.com Reviewed-by: Nathan Chancellor nathan@kernel.org Signed-off-by: Palmer Dabbelt palmerdabbelt@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/Makefile | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile index 1368d943f1f3..5243bf2327c0 100644 --- a/arch/riscv/Makefile +++ b/arch/riscv/Makefile @@ -38,6 +38,15 @@ else KBUILD_LDFLAGS += -melf32lriscv endif
+ifeq ($(CONFIG_LD_IS_LLD),y) + KBUILD_CFLAGS += -mno-relax + KBUILD_AFLAGS += -mno-relax +ifneq ($(LLVM_IAS),1) + KBUILD_CFLAGS += -Wa,-mno-relax + KBUILD_AFLAGS += -Wa,-mno-relax +endif +endif + # ISA string setting riscv-march-$(CONFIG_ARCH_RV32I) := rv32ima riscv-march-$(CONFIG_ARCH_RV64I) := rv64ima
From: Kai Vehmanen kai.vehmanen@linux.intel.com
[ Upstream commit 4ad7935df6a566225c3d51900bde8f2f0f8b6de3 ]
Add HD Audio PCI ID for Intel AlderLake-M. Add rules to snd_intel_dsp_find_config() to choose SOF driver for ADL-M systems with PCH-DMIC or Soundwire codecs, and legacy driver for the rest.
Signed-off-by: Kai Vehmanen kai.vehmanen@linux.intel.com Reviewed-by: Péter Ujfalusi peter.ujfalusi@intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20210528185123.48332-1-kai.vehmanen@linux.intel.co... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/hda/intel-dsp-config.c | 4 ++++ sound/pci/hda/hda_intel.c | 3 +++ 2 files changed, 7 insertions(+)
diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c index ab5ff7867eb9..d8be146793ee 100644 --- a/sound/hda/intel-dsp-config.c +++ b/sound/hda/intel-dsp-config.c @@ -331,6 +331,10 @@ static const struct config_entry config_table[] = { .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE, .device = 0x51c8, }, + { + .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE, + .device = 0x51cc, + }, #endif
}; diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 79ade335c8a0..470753b36c8a 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2485,6 +2485,9 @@ static const struct pci_device_id azx_ids[] = { /* Alderlake-P */ { PCI_DEVICE(0x8086, 0x51c8), .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, + /* Alderlake-M */ + { PCI_DEVICE(0x8086, 0x51cc), + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, /* Elkhart Lake */ { PCI_DEVICE(0x8086, 0x4b55), .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE},
From: Felix Fietkau nbd@nbd.name
[ Upstream commit d4826d17b3931cf0d8351d8f614332dd4b71efc4 ]
Fixes interop issues with some APs that disable HE Tx if this is present
Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20210528120304.34751-1-nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7921/main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c index ada943c7a950..2c781b6f89e5 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c @@ -74,8 +74,7 @@ mt7921_init_he_caps(struct mt7921_phy *phy, enum nl80211_band band, IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G; else if (band == NL80211_BAND_5GHZ) he_cap_elem->phy_cap_info[0] = - IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G | - IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G; + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G;
he_cap_elem->phy_cap_info[1] = IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD;
From: Hillf Danton hdanton@sina.com
[ Upstream commit 1ab19c5de4c537ec0d9b21020395a5b5a6c059b2 ]
The GLF_LRU flag is checked under lru_lock in gfs2_glock_remove_from_lru() to remove the glock from the lru list in __gfs2_glock_put().
On the shrink scan path, the same flag is cleared under lru_lock but because of cond_resched_lock(&lru_lock) in gfs2_dispose_glock_lru(), progress on the put side can be made without deleting the glock from the lru list.
Keep GLF_LRU across the race window opened by cond_resched_lock(&lru_lock) to ensure correct behavior on both sides - clear GLF_LRU after list_del under lru_lock.
Reported-by: syzbot syzbot+34ba7ddbf3021981a228@syzkaller.appspotmail.com Signed-off-by: Hillf Danton hdanton@sina.com Signed-off-by: Andreas Gruenbacher agruenba@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/gfs2/glock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index 142f746d7b33..a99e7295e19f 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -1790,6 +1790,7 @@ __acquires(&lru_lock) while(!list_empty(list)) { gl = list_first_entry(list, struct gfs2_glock, gl_lru); list_del_init(&gl->gl_lru); + clear_bit(GLF_LRU, &gl->gl_flags); if (!spin_trylock(&gl->gl_lockref.lock)) { add_back_to_lru: list_add(&gl->gl_lru, &lru_list); @@ -1835,7 +1836,6 @@ static long gfs2_scan_glock_lru(int nr) if (!test_bit(GLF_LOCK, &gl->gl_flags)) { list_move(&gl->gl_lru, &dispose); atomic_dec(&lru_count); - clear_bit(GLF_LRU, &gl->gl_flags); freed++; continue; }
From: Lin Ma linma@zju.edu.cn
[ Upstream commit e305509e678b3a4af2b3cfd410f409f7cdaabb52 ]
The hci_sock_dev_event() function will cleanup the hdev object for sockets even if this object may still be in used within the hci_sock_bound_ioctl() function, result in UAF vulnerability.
This patch replace the BH context lock to serialize these affairs and prevent the race condition.
Signed-off-by: Lin Ma linma@zju.edu.cn Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/hci_sock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index 251b9128f530..eed0dd066e12 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -762,7 +762,7 @@ void hci_sock_dev_event(struct hci_dev *hdev, int event) /* Detach sockets from device */ read_lock(&hci_sk_list.lock); sk_for_each(sk, &hci_sk_list.head) { - bh_lock_sock_nested(sk); + lock_sock(sk); if (hci_pi(sk)->hdev == hdev) { hci_pi(sk)->hdev = NULL; sk->sk_err = EPIPE; @@ -771,7 +771,7 @@ void hci_sock_dev_event(struct hci_dev *hdev, int event)
hci_dev_put(hdev); } - bh_unlock_sock(sk); + release_sock(sk); } read_unlock(&hci_sk_list.lock); }
From: Maurizio Lombardi mlombard@redhat.com
[ Upstream commit 515da6f4295c2c42b8c54572cce3d2dd1167c41e ]
On realtime kernels, spin_lock_irq*(spinlock_t) do not disable the interrupts, a call to irqs_disabled() will return false thus firing a warning in __transport_wait_for_tasks().
Remove the warning and also replace assert_spin_locked() with lockdep_assert_held()
Link: https://lore.kernel.org/r/20210531121326.3649-1-mlombard@redhat.com Reviewed-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Maurizio Lombardi mlombard@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/target/target_core_transport.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 9e8cd07179d7..28479addb2d1 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2995,9 +2995,7 @@ __transport_wait_for_tasks(struct se_cmd *cmd, bool fabric_stop, __releases(&cmd->t_state_lock) __acquires(&cmd->t_state_lock) { - - assert_spin_locked(&cmd->t_state_lock); - WARN_ON_ONCE(!irqs_disabled()); + lockdep_assert_held(&cmd->t_state_lock);
if (fabric_stop) cmd->transport_state |= CMD_T_FABRIC_STOP;
From: Jiapeng Chong jiapeng.chong@linux.alibaba.com
[ Upstream commit f336d0b93ae978f12c5e27199f828da89b91e56a ]
The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'status'.
Eliminate the follow smatch warning:
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:3818 myri10ge_probe() warn: missing error code 'status'.
Reported-by: Abaci Robot abaci@linux.alibaba.com Signed-off-by: Jiapeng Chong jiapeng.chong@linux.alibaba.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c index c84c8bf2bc20..fc99ad8e4a38 100644 --- a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c +++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c @@ -3815,6 +3815,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev_err(&pdev->dev, "invalid sram_size %dB or board span %ldB\n", mgp->sram_size, mgp->board_span); + status = -EINVAL; goto abort_with_ioremap; } memcpy_fromio(mgp->eeprom_strings,
From: Daniel Wagner dwagner@suse.de
[ Upstream commit 79c932cd6af9829432888c4a0001d01793a09f12 ]
Do not drop reference count on vn_port->host in qedf_vport_create() unconditionally. Instead drop the reference count in qedf_vport_destroy().
Link: https://lore.kernel.org/r/20210521143440.84816-1-dwagner@suse.de Reported-by: Javed Hasan jhasan@marvell.com Signed-off-by: Daniel Wagner dwagner@suse.de Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qedf/qedf_main.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index e5076f09d5ed..16a0470aedfc 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -1827,22 +1827,20 @@ static int qedf_vport_create(struct fc_vport *vport, bool disabled) fcoe_wwn_to_str(vport->port_name, buf, sizeof(buf)); QEDF_WARN(&(base_qedf->dbg_ctx), "Failed to create vport, " "WWPN (0x%s) already exists.\n", buf); - goto err1; + return rc; }
if (atomic_read(&base_qedf->link_state) != QEDF_LINK_UP) { QEDF_WARN(&(base_qedf->dbg_ctx), "Cannot create vport " "because link is not up.\n"); - rc = -EIO; - goto err1; + return -EIO; }
vn_port = libfc_vport_create(vport, sizeof(struct qedf_ctx)); if (!vn_port) { QEDF_WARN(&(base_qedf->dbg_ctx), "Could not create lport " "for vport.\n"); - rc = -ENOMEM; - goto err1; + return -ENOMEM; }
fcoe_wwn_to_str(vport->port_name, buf, sizeof(buf)); @@ -1866,7 +1864,7 @@ static int qedf_vport_create(struct fc_vport *vport, bool disabled) if (rc) { QEDF_ERR(&(base_qedf->dbg_ctx), "Could not allocate memory " "for lport stats.\n"); - goto err2; + goto err; }
fc_set_wwnn(vn_port, vport->node_name); @@ -1884,7 +1882,7 @@ static int qedf_vport_create(struct fc_vport *vport, bool disabled) if (rc) { QEDF_WARN(&base_qedf->dbg_ctx, "Error adding Scsi_Host rc=0x%x.\n", rc); - goto err2; + goto err; }
/* Set default dev_loss_tmo based on module parameter */ @@ -1925,9 +1923,10 @@ static int qedf_vport_create(struct fc_vport *vport, bool disabled) vport_qedf->dbg_ctx.host_no = vn_port->host->host_no; vport_qedf->dbg_ctx.pdev = base_qedf->pdev;
-err2: + return 0; + +err: scsi_host_put(vn_port->host); -err1: return rc; }
@@ -1968,8 +1967,7 @@ static int qedf_vport_destroy(struct fc_vport *vport) fc_lport_free_stats(vn_port);
/* Release Scsi_Host */ - if (vn_port->host) - scsi_host_put(vn_port->host); + scsi_host_put(vn_port->host);
out: return 0;
From: Larry Finger Larry.Finger@lwfinger.net
[ Upstream commit 4d96d3b0efee6416ef0d61b76aaac6f4a2e15b12 ]
Some models of the RTL8822ce utilize a different USB ID. Add this new one to the Bluetooth driver.
Signed-off-by: Larry Finger Larry.Finger@lwfinger.net Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 4a901508e48e..ddc7b86725cd 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -388,6 +388,8 @@ static const struct usb_device_id blacklist_table[] = { /* Realtek 8822CE Bluetooth devices */ { USB_DEVICE(0x0bda, 0xb00c), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0bda, 0xc822), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH },
/* Realtek 8852AE Bluetooth devices */ { USB_DEVICE(0x0bda, 0xc852), .driver_info = BTUSB_REALTEK |
From: "Ewan D. Milne" emilne@redhat.com
[ Upstream commit e57f5cd99ca60cddf40201b0f4ced9f1938e299c ]
Apparently some arrays are now returning "HPE" as the vendor.
Link: https://lore.kernel.org/r/20210601175214.25719-1-emilne@redhat.com Signed-off-by: Ewan D. Milne emilne@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/scsi_devinfo.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index d92cec12454c..d33355ab6e14 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -184,6 +184,7 @@ static struct { {"HP", "C3323-300", "4269", BLIST_NOTQ}, {"HP", "C5713A", NULL, BLIST_NOREPORTLUN}, {"HP", "DISK-SUBSYSTEM", "*", BLIST_REPORTLUN2}, + {"HPE", "OPEN-", "*", BLIST_REPORTLUN2 | BLIST_TRY_VPD_PAGES}, {"IBM", "AuSaV1S2", NULL, BLIST_FORCELUN}, {"IBM", "ProFibre 4000R", "*", BLIST_SPARSELUN | BLIST_LARGELUN}, {"IBM", "2105", NULL, BLIST_RETRY_HWERROR},
From: Hannes Reinecke hare@suse.de
[ Upstream commit a6c144f3d2e230f2b3ac5ed8c51e0f0391556197 ]
The queue count is increased in nvme_loop_init_io_queues(), so we need to reset it to 1 at the end of nvme_loop_destroy_io_queues(). Otherwise the function is not re-entrant safe, and crash will happen during concurrent reset and remove calls.
Signed-off-by: Hannes Reinecke hare@suse.de Reviewed-by: Chaitanya Kulkarni chaitanya.kulkarni@wdc.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/loop.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c index 14913a4588ec..4b2a6330feb5 100644 --- a/drivers/nvme/target/loop.c +++ b/drivers/nvme/target/loop.c @@ -297,6 +297,7 @@ static void nvme_loop_destroy_io_queues(struct nvme_loop_ctrl *ctrl) clear_bit(NVME_LOOP_Q_LIVE, &ctrl->queues[i].flags); nvmet_sq_destroy(&ctrl->queues[i].nvme_sq); } + ctrl->ctrl.queue_count = 1; }
static int nvme_loop_init_io_queues(struct nvme_loop_ctrl *ctrl)
From: Hannes Reinecke hare@suse.de
[ Upstream commit 1c5f8e882a05de5c011e8c3fbeceb0d1c590eb53 ]
When the call to nvme_enable_ctrl() in nvme_loop_configure_admin_queue() fails the NVME_LOOP_Q_LIVE flag is not cleared.
Signed-off-by: Hannes Reinecke hare@suse.de Reviewed-by: Chaitanya Kulkarni chaitanya.kulkarni@wdc.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/loop.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c index 4b2a6330feb5..c34f785e699d 100644 --- a/drivers/nvme/target/loop.c +++ b/drivers/nvme/target/loop.c @@ -404,6 +404,7 @@ static int nvme_loop_configure_admin_queue(struct nvme_loop_ctrl *ctrl) return 0;
out_cleanup_queue: + clear_bit(NVME_LOOP_Q_LIVE, &ctrl->queues[0].flags); blk_cleanup_queue(ctrl->ctrl.admin_q); out_cleanup_fabrics_q: blk_cleanup_queue(ctrl->ctrl.fabrics_q);
From: Hannes Reinecke hare@suse.de
[ Upstream commit 4237de2f73a669e4f89ac0aa2b44fb1a1d9ec583 ]
We need to check the NVME_LOOP_Q_LIVE flag in nvme_loop_destroy_admin_queue() to protect against duplicate invocations eg during concurrent reset and remove calls.
Signed-off-by: Hannes Reinecke hare@suse.de Reviewed-by: Chaitanya Kulkarni chaitanya.kulkarni@wdc.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/loop.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c index c34f785e699d..fe14609d2254 100644 --- a/drivers/nvme/target/loop.c +++ b/drivers/nvme/target/loop.c @@ -261,7 +261,8 @@ static const struct blk_mq_ops nvme_loop_admin_mq_ops = {
static void nvme_loop_destroy_admin_queue(struct nvme_loop_ctrl *ctrl) { - clear_bit(NVME_LOOP_Q_LIVE, &ctrl->queues[0].flags); + if (!test_and_clear_bit(NVME_LOOP_Q_LIVE, &ctrl->queues[0].flags)) + return; nvmet_sq_destroy(&ctrl->queues[0].nvme_sq); blk_cleanup_queue(ctrl->ctrl.admin_q); blk_cleanup_queue(ctrl->ctrl.fabrics_q);
From: Hannes Reinecke hare@suse.de
[ Upstream commit 6622f9acd29cd4f6272720e827e6406f5a970cb0 ]
During concurrent reset and delete calls the reset workqueue is flushed, causing nvme_loop_reset_ctrl_work() to be executed when the controller is in state DELETING or DELETING_NOIO. But this is expected, so we shouldn't issue a WARN_ON here.
Signed-off-by: Hannes Reinecke hare@suse.de Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/loop.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c index fe14609d2254..0f22f333ff24 100644 --- a/drivers/nvme/target/loop.c +++ b/drivers/nvme/target/loop.c @@ -463,8 +463,10 @@ static void nvme_loop_reset_ctrl_work(struct work_struct *work) nvme_loop_shutdown_ctrl(ctrl);
if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING)) { - /* state change failure should never happen */ - WARN_ON_ONCE(1); + if (ctrl->ctrl.state != NVME_CTRL_DELETING && + ctrl->ctrl.state != NVME_CTRL_DELETING_NOIO) + /* state change failure for non-deleted ctrl? */ + WARN_ON_ONCE(1); return; }
From: Josh Triplett josh@joshtriplett.org
[ Upstream commit b508d5fb69c2211a1b860fc058aafbefc3b3c3cd ]
If the user specifies a hostname or domain name as part of the ip= command-line option, preserve it and don't overwrite it with one supplied by DHCP/BOOTP.
For instance, ip=::::myhostname::dhcp will use "myhostname" rather than ignoring and overwriting it.
Fix the comment on ic_bootp_string that suggests it only copies a string "if not already set"; it doesn't have any such logic.
Signed-off-by: Josh Triplett josh@joshtriplett.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/ipconfig.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index bc2f6ca97152..816d8aad5a68 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -886,7 +886,7 @@ static void __init ic_bootp_send_if(struct ic_device *d, unsigned long jiffies_d
/* - * Copy BOOTP-supplied string if not already set. + * Copy BOOTP-supplied string */ static int __init ic_bootp_string(char *dest, char *src, int len, int max) { @@ -935,12 +935,15 @@ static void __init ic_do_bootp_ext(u8 *ext) } break; case 12: /* Host name */ - ic_bootp_string(utsname()->nodename, ext+1, *ext, - __NEW_UTS_LEN); - ic_host_name_set = 1; + if (!ic_host_name_set) { + ic_bootp_string(utsname()->nodename, ext+1, *ext, + __NEW_UTS_LEN); + ic_host_name_set = 1; + } break; case 15: /* Domain name (DNS) */ - ic_bootp_string(ic_domain, ext+1, *ext, sizeof(ic_domain)); + if (!ic_domain[0]) + ic_bootp_string(ic_domain, ext+1, *ext, sizeof(ic_domain)); break; case 17: /* Root path */ if (!root_server_path[0])
From: Bindu Ramamurthy bindu.r@amd.com
[ Upstream commit ba8e59773ae59818695d1e20b8939282da80ec8c ]
[Why] Bandwidth calculations are triggered for non zero streams, and in case of 0 streams, these calculations were skipped with pstate status not being updated.
[How] As the pstate status is applicable for non zero streams, check added for allowing 0 streams inline with dcn internal bandwidth validations.
Signed-off-by: Bindu Ramamurthy bindu.r@amd.com Reviewed-by: Roman Li Roman.Li@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c index bfbc23b76cd5..3e3c898848bd 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c @@ -3231,7 +3231,7 @@ static noinline bool dcn20_validate_bandwidth_fp(struct dc *dc, voltage_supported = dcn20_validate_bandwidth_internal(dc, context, false); dummy_pstate_supported = context->bw_ctx.bw.dcn.clk.p_state_change_support;
- if (voltage_supported && dummy_pstate_supported) { + if (voltage_supported && (dummy_pstate_supported || !(context->stream_count))) { context->bw_ctx.bw.dcn.clk.p_state_change_support = false; goto restore_dml_state; }
From: Jiansong Chen Jiansong.Chen@amd.com
[ Upstream commit 5cfc912582e13b05d71fb7acc4ec69ddfa9af320 ]
1. eliminate potential array index out of bounds. 2. return meaningful value for failure.
Signed-off-by: Jiansong Chen Jiansong.Chen@amd.com Reviewed-by: Jack Gui Jack.Gui@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c | 42 ++++++++++--------- 1 file changed, 23 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c index 8f4a8f8d8146..39b6c6bfab45 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c @@ -101,7 +101,8 @@ static int amdgpu_fru_read_eeprom(struct amdgpu_device *adev, uint32_t addrptr, int amdgpu_fru_get_product_info(struct amdgpu_device *adev) { unsigned char buff[34]; - int addrptr = 0, size = 0; + int addrptr, size; + int len;
if (!is_fru_eeprom_supported(adev)) return 0; @@ -109,7 +110,7 @@ int amdgpu_fru_get_product_info(struct amdgpu_device *adev) /* If algo exists, it means that the i2c_adapter's initialized */ if (!adev->pm.smu_i2c.algo) { DRM_WARN("Cannot access FRU, EEPROM accessor not initialized"); - return 0; + return -ENODEV; }
/* There's a lot of repetition here. This is due to the FRU having @@ -128,7 +129,7 @@ int amdgpu_fru_get_product_info(struct amdgpu_device *adev) size = amdgpu_fru_read_eeprom(adev, addrptr, buff); if (size < 1) { DRM_ERROR("Failed to read FRU Manufacturer, ret:%d", size); - return size; + return -EINVAL; }
/* Increment the addrptr by the size of the field, and 1 due to the @@ -138,43 +139,45 @@ int amdgpu_fru_get_product_info(struct amdgpu_device *adev) size = amdgpu_fru_read_eeprom(adev, addrptr, buff); if (size < 1) { DRM_ERROR("Failed to read FRU product name, ret:%d", size); - return size; + return -EINVAL; }
+ len = size; /* Product name should only be 32 characters. Any more, * and something could be wrong. Cap it at 32 to be safe */ - if (size > 32) { + if (len >= sizeof(adev->product_name)) { DRM_WARN("FRU Product Number is larger than 32 characters. This is likely a mistake"); - size = 32; + len = sizeof(adev->product_name) - 1; } /* Start at 2 due to buff using fields 0 and 1 for the address */ - memcpy(adev->product_name, &buff[2], size); - adev->product_name[size] = '\0'; + memcpy(adev->product_name, &buff[2], len); + adev->product_name[len] = '\0';
addrptr += size + 1; size = amdgpu_fru_read_eeprom(adev, addrptr, buff); if (size < 1) { DRM_ERROR("Failed to read FRU product number, ret:%d", size); - return size; + return -EINVAL; }
+ len = size; /* Product number should only be 16 characters. Any more, * and something could be wrong. Cap it at 16 to be safe */ - if (size > 16) { + if (len >= sizeof(adev->product_number)) { DRM_WARN("FRU Product Number is larger than 16 characters. This is likely a mistake"); - size = 16; + len = sizeof(adev->product_number) - 1; } - memcpy(adev->product_number, &buff[2], size); - adev->product_number[size] = '\0'; + memcpy(adev->product_number, &buff[2], len); + adev->product_number[len] = '\0';
addrptr += size + 1; size = amdgpu_fru_read_eeprom(adev, addrptr, buff);
if (size < 1) { DRM_ERROR("Failed to read FRU product version, ret:%d", size); - return size; + return -EINVAL; }
addrptr += size + 1; @@ -182,18 +185,19 @@ int amdgpu_fru_get_product_info(struct amdgpu_device *adev)
if (size < 1) { DRM_ERROR("Failed to read FRU serial number, ret:%d", size); - return size; + return -EINVAL; }
+ len = size; /* Serial number should only be 16 characters. Any more, * and something could be wrong. Cap it at 16 to be safe */ - if (size > 16) { + if (len >= sizeof(adev->serial)) { DRM_WARN("FRU Serial Number is larger than 16 characters. This is likely a mistake"); - size = 16; + len = sizeof(adev->serial) - 1; } - memcpy(adev->serial, &buff[2], size); - adev->serial[size] = '\0'; + memcpy(adev->serial, &buff[2], len); + adev->serial[len] = '\0';
return 0; }
From: Rodrigo Siqueira Rodrigo.Siqueira@amd.com
[ Upstream commit 33f409e60eb0c59a4d0d06a62ab4642a988e17f7 ]
A few weeks ago, we saw a two cursor issue in a ChromeOS system. We fixed it in the commit:
drm/amd/display: Fix two cursor duplication when using overlay (read the commit message for more details)
After this change, we noticed that some IGT subtests related to kms_plane and kms_plane_scaling started to fail. After investigating this issue, we noticed that all subtests that fail have a primary plane covering the overlay plane, which is currently rejected by amdgpu dm. Fail those IGT tests highlight that our verification was too broad and compromises the overlay usage in our drive. This patch fixes this issue by ensuring that we only reject commits where the primary plane is not fully covered by the overlay when the cursor hardware is enabled. With this fix, all IGT tests start to pass again, which means our overlay support works as expected.
Cc: Tianci.Yin tianci.yin@amd.com Cc: Harry Wentland harry.wentland@amd.com Cc: Nicholas Choi nicholas.choi@amd.com Cc: Bhawanpreet Lakha bhawanpreet.lakha@amd.com Cc: Nicholas Kazlauskas Nicholas.Kazlauskas@amd.com Cc: Mark Yacoub markyacoub@google.com Cc: Daniel Wheeler daniel.wheeler@amd.com
Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Rodrigo Siqueira Rodrigo.Siqueira@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index b63f55ea8758..69023b4b0a8b 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -9349,7 +9349,7 @@ static int validate_overlay(struct drm_atomic_state *state) int i; struct drm_plane *plane; struct drm_plane_state *old_plane_state, *new_plane_state; - struct drm_plane_state *primary_state, *overlay_state = NULL; + struct drm_plane_state *primary_state, *cursor_state, *overlay_state = NULL;
/* Check if primary plane is contained inside overlay */ for_each_oldnew_plane_in_state_reverse(state, plane, old_plane_state, new_plane_state, i) { @@ -9379,6 +9379,14 @@ static int validate_overlay(struct drm_atomic_state *state) if (!primary_state->crtc) return 0;
+ /* check if cursor plane is enabled */ + cursor_state = drm_atomic_get_plane_state(state, overlay_state->crtc->cursor); + if (IS_ERR(cursor_state)) + return PTR_ERR(cursor_state); + + if (drm_atomic_plane_disabling(plane->state, cursor_state)) + return 0; + /* Perform the bounds check to ensure the overlay plane covers the primary */ if (primary_state->crtc_x < overlay_state->crtc_x || primary_state->crtc_y < overlay_state->crtc_y ||
From: Roman Li roman.li@amd.com
[ Upstream commit c5699e2d863f58221044efdc3fa712dd32d55cde ]
[Why] On resume we perform DMUB hw_init which allocates memory: dm_resume->dm_dmub_hw_init->dc_dmub_srv_create->kzalloc That results in memory leak in suspend/resume scenarios.
[How] Allocate memory for the DC wrapper to DMUB only if it was not allocated before. No need to reallocate it on suspend/resume.
Signed-off-by: Lang Yu Lang.Yu@amd.com Signed-off-by: Roman Li roman.li@amd.com Reviewed-by: Nicholas Kazlauskas Nicholas.Kazlauskas@amd.com Acked-by: Qingqing Zhuo qingqing.zhuo@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 69023b4b0a8b..95d5bc2da178 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -871,7 +871,8 @@ static int dm_dmub_hw_init(struct amdgpu_device *adev) abm->dmcu_is_running = dmcu->funcs->is_dmcu_initialized(dmcu); }
- adev->dm.dc->ctx->dmub_srv = dc_dmub_srv_create(adev->dm.dc, dmub_srv); + if (!adev->dm.dc->ctx->dmub_srv) + adev->dm.dc->ctx->dmub_srv = dc_dmub_srv_create(adev->dm.dc, dmub_srv); if (!adev->dm.dc->ctx->dmub_srv) { DRM_ERROR("Couldn't allocate DC DMUB server!\n"); return -ENOMEM; @@ -1863,7 +1864,6 @@ static int dm_suspend(void *handle)
amdgpu_dm_irq_suspend(adev);
- dc_set_power_state(dm->dc, DC_ACPI_CM_POWER_STATE_D3);
return 0;
From: Victor Zhao Victor.Zhao@amd.com
[ Upstream commit 2370eba9f552eaae3d8aa1f70b8e9eec5c560f9e ]
[Why] When some tools performing psp mailbox attack, the readback value of register can be a random value which may break psp.
[How] Use a psp wptr cache machanism to aovid the change made by attack.
v2: unify change and add detailed reason
Signed-off-by: Victor Zhao Victor.Zhao@amd.com Signed-off-by: Jingwen Chen Jingwen.Chen2@amd.com Reviewed-by: Monk Liu monk.liu@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h | 1 + drivers/gpu/drm/amd/amdgpu/psp_v11_0.c | 3 ++- drivers/gpu/drm/amd/amdgpu/psp_v3_1.c | 3 ++- 3 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h index cb50ba445f8c..0fd62a8e68c2 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h @@ -76,6 +76,7 @@ struct psp_ring uint64_t ring_mem_mc_addr; void *ring_mem_handle; uint32_t ring_size; + uint32_t ring_wptr; };
/* More registers may will be supported */ diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c index c325d6f53a71..d39735a89a25 100644 --- a/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c @@ -720,7 +720,7 @@ static uint32_t psp_v11_0_ring_get_wptr(struct psp_context *psp) struct amdgpu_device *adev = psp->adev;
if (amdgpu_sriov_vf(adev)) - data = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_102); + data = psp->km_ring.ring_wptr; else data = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_67);
@@ -734,6 +734,7 @@ static void psp_v11_0_ring_set_wptr(struct psp_context *psp, uint32_t value) if (amdgpu_sriov_vf(adev)) { WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_102, value); WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_101, GFX_CTRL_CMD_ID_CONSUME_CMD); + psp->km_ring.ring_wptr = value; } else WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_67, value); } diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v3_1.c b/drivers/gpu/drm/amd/amdgpu/psp_v3_1.c index f2e725f72d2f..908664a5774b 100644 --- a/drivers/gpu/drm/amd/amdgpu/psp_v3_1.c +++ b/drivers/gpu/drm/amd/amdgpu/psp_v3_1.c @@ -379,7 +379,7 @@ static uint32_t psp_v3_1_ring_get_wptr(struct psp_context *psp) struct amdgpu_device *adev = psp->adev;
if (amdgpu_sriov_vf(adev)) - data = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_102); + data = psp->km_ring.ring_wptr; else data = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_67); return data; @@ -394,6 +394,7 @@ static void psp_v3_1_ring_set_wptr(struct psp_context *psp, uint32_t value) /* send interrupt to PSP for SRIOV ring write pointer update */ WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_101, GFX_CTRL_CMD_ID_CONSUME_CMD); + psp->km_ring.ring_wptr = value; } else WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_67, value); }
From: Jiapeng Chong jiapeng.chong@linux.alibaba.com
[ Upstream commit a8db57c1d285c758adc7fb43d6e2bad2554106e1 ]
The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'err'.
Eliminate the follow smatch warning:
net/core/rtnetlink.c:4834 rtnl_bridge_notify() warn: missing error code 'err'.
Reported-by: Abaci Robot abaci@linux.alibaba.com Signed-off-by: Jiapeng Chong jiapeng.chong@linux.alibaba.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/rtnetlink.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 3485b16a7ff3..9ad046917b34 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -4833,8 +4833,10 @@ static int rtnl_bridge_notify(struct net_device *dev) if (err < 0) goto errout;
- if (!skb->len) + if (!skb->len) { + err = -EINVAL; goto errout; + }
rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL, GFP_ATOMIC); return 0;
From: Zheng Yongjun zhengyongjun3@huawei.com
[ Upstream commit d7736958668c4facc15f421e622ffd718f5be80a ]
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.
Signed-off-by: Zheng Yongjun zhengyongjun3@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/x25/af_x25.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c index ff687b97b2d9..401901c8ad42 100644 --- a/net/x25/af_x25.c +++ b/net/x25/af_x25.c @@ -536,7 +536,7 @@ static int x25_create(struct net *net, struct socket *sock, int protocol, if (protocol) goto out;
- rc = -ENOBUFS; + rc = -ENOMEM; if ((sk = x25_alloc_socket(net, kern)) == NULL) goto out;
From: Zheng Yongjun zhengyongjun3@huawei.com
[ Upstream commit 49251cd00228a3c983651f6bb2f33f6a0b8f152e ]
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.
Signed-off-by: Zheng Yongjun zhengyongjun3@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/compat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/compat.c b/net/compat.c index ddd15af3a283..210fc3b4d0d8 100644 --- a/net/compat.c +++ b/net/compat.c @@ -177,7 +177,7 @@ int cmsghdr_from_user_compat_to_kern(struct msghdr *kmsg, struct sock *sk, if (kcmlen > stackbuf_size) kcmsg_base = kcmsg = sock_kmalloc(sk, kcmlen, GFP_KERNEL); if (kcmsg == NULL) - return -ENOBUFS; + return -ENOMEM;
/* Now copy them over neatly. */ memset(kcmsg, 0, kcmlen);
From: Zheng Yongjun zhengyongjun3@huawei.com
[ Upstream commit 59607863c54e9eb3f69afc5257dfe71c38bb751e ]
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.
Signed-off-by: Zheng Yongjun zhengyongjun3@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/fib_rules.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c index cd80ffed6d26..a9f937975080 100644 --- a/net/core/fib_rules.c +++ b/net/core/fib_rules.c @@ -1168,7 +1168,7 @@ static void notify_rule_change(int event, struct fib_rule *rule, { struct net *net; struct sk_buff *skb; - int err = -ENOBUFS; + int err = -ENOMEM;
net = ops->fro_net; skb = nlmsg_new(fib_rule_nlmsg_size(ops, rule), GFP_KERNEL);
linux-stable-mirror@lists.linaro.org
-
Sasha Levin