Make sure not to set run_stop bit or link state change request while initiating soft-reset. Register read-modify-write operation may unintentionally start the controller before the initialization completes with its previous DCTL value, which can cause initialization failure.

Fixes: f59dcab17629 ("usb: dwc3: core: improve reset sequence") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen Thinh.Nguyen@synopsys.com --- drivers/usb/dwc3/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 1ca9dae57855..d28cd1a6709b 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -274,7 +274,8 @@ int dwc3_core_soft_reset(struct dwc3 *dwc)

reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg |= DWC3_DCTL_CSFTRST; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + reg &= ~DWC3_DCTL_RUN_STOP; + dwc3_gadget_dctl_write_safe(dwc, reg);

/* * For DWC_usb31 controller 1.90a and later, the DCTL.CSFRST bit

base-commit: bf95c4d4630c7a2c16e7b424fdea5177d9ce0864