The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From f43194c1447c9536efb0859c2f3f46f6bf2b9154 Mon Sep 17 00:00:00 2001

From: Maxime Chevallier maxime.chevallier@bootlin.com Date: Wed, 25 Apr 2018 20:19:47 +0200 Subject: [PATCH] ARM64: dts: marvell: armada-cp110: Add mg_core_clk for ethernet node

Marvell PPv2.2 controller present on CP-110 need the extra "mg_core_clk" clock to avoid system hangs when powering some network interfaces up.

This issue appeared after a recent clock rework on Armada 7K/8K platforms.

This commit adds the new clock and updates the documentation accordingly.

[gregory.clement: use the real first commit to fix and add the cc:stable flag] Fixes: e3af9f7c6ece ("RM64: dts: marvell: armada-cp110: Fix clock resources for various node") Cc: stable@vger.kernel.org Signed-off-by: Maxime Chevallier maxime.chevallier@bootlin.com Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com

diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index 1814fa13f6ab..fc019df0d863 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -21,9 +21,10 @@ Required properties: - main controller clock (for both armada-375-pp2 and armada-7k-pp2) - GOP clock (for both armada-375-pp2 and armada-7k-pp2) - MG clock (only for armada-7k-pp2) + - MG Core clock (only for armada-7k-pp2) - AXI clock (only for armada-7k-pp2) -- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk" - and "axi_clk" (the 2 latter only for armada-7k-pp2). +- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk", + "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).

The ethernet ports are represented by subnodes. At least one port is required. @@ -80,8 +81,8 @@ cpm_ethernet: ethernet@0 { compatible = "marvell,armada-7k-pp22"; reg = <0x0 0x100000>, <0x129000 0xb000>; clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, - <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>; - clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk"; + <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>; + clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";

eth0: eth0 { interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index ca22f9d100f5..ed2f1237ea1e 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -38,9 +38,10 @@ compatible = "marvell,armada-7k-pp22"; reg = <0x0 0x100000>, <0x129000 0xb000>; clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>, - <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 18>; + <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, + <&CP110_LABEL(clk) 1 18>; clock-names = "pp_clk", "gop_clk", - "mg_clk", "axi_clk"; + "mg_clk", "mg_core_clk", "axi_clk"; marvell,system-controller = <&CP110_LABEL(syscon0)>; status = "disabled"; dma-coherent;