Commit 6d4cd041f0af ("net: phy: at803x: disable delay only for RGMII mode") exposed an issue on imx DTS files using AR8031/AR8035 PHYs.
The end result is that the boards can no longer obtain an IP address via UDHCP, for example.
Quoting Andrew Lunn:
"The problem here is, all the DTs were broken since day 0. However, because the PHY driver was also broken, nobody noticed and it worked. Now that the PHY driver has been fixed, all the bugs in the DTs now become an issue"
To fix this problem, the phy-mode property needs to be "rgmii-id", which has the following meaning as per Documentation/devicetree/bindings/net/ethernet.txt:
"RGMII with internal RX and TX delays provided by the PHY, the MAC should not add the RX or TX delays in this case)"
Tested on imx6-sabresd, imx6sx-sdb and imx7d-pico boards with successfully restored networking.
Based on the initial submission from Steve Twiss for the imx6qdl-sabresd.
Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Fabio Estevam festevam@gmail.com Tested-by: Baruch Siach baruch@tkos.co.il Tested-by: Soeren Moch smoch@web.de Tested-by: Steve Twiss stwiss.opensource@diasemi.com Tested-by: Adam Thomson Adam.Thomson@diasemi.com Signed-off-by: Steve Twiss stwiss.opensource@diasemi.com Tested-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de --- Changes since v1: - Also fix imx6-logicpd and imx6q-marsboard
arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi | 2 +- arch/arm/boot/dts/imx6dl-riotboard.dts | 2 +- arch/arm/boot/dts/imx6q-marsboard.dts | 2 +- arch/arm/boot/dts/imx6q-tbs2910.dts | 2 +- arch/arm/boot/dts/imx6qdl-apf6.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sr-som.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 2 +- arch/arm/boot/dts/imx6sx-sabreauto.dts | 2 +- arch/arm/boot/dts/imx6sx-sdb.dtsi | 2 +- arch/arm/boot/dts/imx7d-pico.dtsi | 2 +- 12 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi index fb01fa6e4224..3cae139e6396 100644 --- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi @@ -216,7 +216,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-duration = <10>; phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; phy-supply = <®_enet>; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 65c184bb8fb0..d9de49efa802 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -92,7 +92,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index d8ccb533b6b7..84b30bd6908f 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -110,7 +110,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 2ce8399a10ba..bfff87ce2e1f 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -98,7 +98,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi index 1ebf29f43a24..4738c3c1ab50 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi @@ -51,7 +51,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-duration = <10>; phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 1280de50a984..f3404dd10537 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -292,7 +292,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index a0705066ccba..185fb17a3500 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -202,7 +202,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi index 4ccb7afc4b35..6d7f6b9035bc 100644 --- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi @@ -53,7 +53,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-duration = <2>; phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index b7d5fb421404..50d9a989e06a 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -224,7 +224,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index b0ee324afe58..315044ccd65f 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -75,7 +75,7 @@ &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy1>; fsl,magic-packet; status = "okay"; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 08ede56c3f10..f6972deb5e39 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -191,7 +191,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; phy-supply = <®_enet_3v3>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy1>; phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi index 3fd595a71202..6f50ebf31a0a 100644 --- a/arch/arm/boot/dts/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -92,7 +92,7 @@ <&clks IMX7D_ENET1_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy0>; fsl,magic-packet; phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
On Mon, Apr 1, 2019 at 7:37 PM Fabio Estevam festevam@gmail.com wrote:
Commit 6d4cd041f0af ("net: phy: at803x: disable delay only for RGMII mode") exposed an issue on imx DTS files using AR8031/AR8035 PHYs.
The end result is that the boards can no longer obtain an IP address via UDHCP, for example.
Quoting Andrew Lunn:
"The problem here is, all the DTs were broken since day 0. However, because the PHY driver was also broken, nobody noticed and it worked. Now that the PHY driver has been fixed, all the bugs in the DTs now become an issue"
To fix this problem, the phy-mode property needs to be "rgmii-id", which has the following meaning as per Documentation/devicetree/bindings/net/ethernet.txt:
"RGMII with internal RX and TX delays provided by the PHY, the MAC should not add the RX or TX delays in this case)"
Tested on imx6-sabresd, imx6sx-sdb and imx7d-pico boards with successfully restored networking.
Based on the initial submission from Steve Twiss for the imx6qdl-sabresd.
Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Fabio Estevam festevam@gmail.com Tested-by: Baruch Siach baruch@tkos.co.il Tested-by: Soeren Moch smoch@web.de Tested-by: Steve Twiss stwiss.opensource@diasemi.com Tested-by: Adam Thomson Adam.Thomson@diasemi.com Signed-off-by: Steve Twiss stwiss.opensource@diasemi.com Tested-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de
Tested-by: Adam Ford aford173@gmail.com
Changes since v1:
- Also fix imx6-logicpd and imx6q-marsboard
arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi | 2 +-
Thanks for doing that.
adam
arch/arm/boot/dts/imx6dl-riotboard.dts | 2 +- arch/arm/boot/dts/imx6q-marsboard.dts | 2 +- arch/arm/boot/dts/imx6q-tbs2910.dts | 2 +- arch/arm/boot/dts/imx6qdl-apf6.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sr-som.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 2 +- arch/arm/boot/dts/imx6sx-sabreauto.dts | 2 +- arch/arm/boot/dts/imx6sx-sdb.dtsi | 2 +- arch/arm/boot/dts/imx7d-pico.dtsi | 2 +- 12 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi index fb01fa6e4224..3cae139e6396 100644 --- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi @@ -216,7 +216,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id"; phy-reset-duration = <10>; phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; phy-supply = <®_enet>;
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 65c184bb8fb0..d9de49efa802 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -92,7 +92,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index d8ccb533b6b7..84b30bd6908f 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -110,7 +110,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; status = "okay";
}; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 2ce8399a10ba..bfff87ce2e1f 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -98,7 +98,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; status = "okay";
}; diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi index 1ebf29f43a24..4738c3c1ab50 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi @@ -51,7 +51,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id"; phy-reset-duration = <10>; phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 1280de50a984..f3404dd10537 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -292,7 +292,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id"; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index a0705066ccba..185fb17a3500 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -202,7 +202,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; status = "okay";
}; diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi index 4ccb7afc4b35..6d7f6b9035bc 100644 --- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi @@ -53,7 +53,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
phy-mode = "rgmii";
phy-mode = "rgmii-id"; phy-reset-duration = <2>; phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index b7d5fb421404..50d9a989e06a 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -224,7 +224,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index b0ee324afe58..315044ccd65f 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -75,7 +75,7 @@ &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rgmii";
phy-mode = "rgmii-id"; phy-handle = <ðphy1>; fsl,magic-packet; status = "okay";
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 08ede56c3f10..f6972deb5e39 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -191,7 +191,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; phy-supply = <®_enet_3v3>;
phy-mode = "rgmii";
phy-mode = "rgmii-id"; phy-handle = <ðphy1>; phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; status = "okay";
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi index 3fd595a71202..6f50ebf31a0a 100644 --- a/arch/arm/boot/dts/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -92,7 +92,7 @@ <&clks IMX7D_ENET1_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>;
phy-mode = "rgmii";
phy-mode = "rgmii-id"; phy-handle = <ðphy0>; fsl,magic-packet; phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-- 2.17.1
linux-stable-mirror@lists.linaro.org