From: Zhaolong Zhang zhangzl2013@126.com
[ Upstream commit c915fb80eaa6194fa9bd0a4487705cd5b0dda2f1 ]
__ext4_journalled_writepage should drop bhs' ref count on error paths
Signed-off-by: Zhaolong Zhang zhangzl2013@126.com Link: https://lore.kernel.org/r/1614678151-70481-1-git-send-email-zhangzl2013@126.... Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/inode.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index ccce89de6d7e..7e41f7ccbfb5 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1979,13 +1979,13 @@ static int __ext4_journalled_writepage(struct page *page, if (!ret) ret = err;
- if (!ext4_has_inline_data(inode)) - ext4_walk_page_buffers(NULL, page_bufs, 0, len, - NULL, bput_one); ext4_set_inode_state(inode, EXT4_STATE_JDATA); out: unlock_page(page); out_no_pagelock: + if (!inline_data && page_bufs) + ext4_walk_page_buffers(NULL, page_bufs, 0, len, + NULL, bput_one); brelse(inode_bh); return ret; }
From: "J. Bruce Fields" bfields@redhat.com
[ Upstream commit 0ddc942394013f08992fc379ca04cffacbbe3dae ]
I think this is unlikely but possible:
svc_authenticate sets rq_authop and calls svcauth_gss_accept. The kmalloc(sizeof(*svcdata), GFP_KERNEL) fails, leaving rq_auth_data NULL, and returning SVC_DENIED.
This causes svc_process_common to go to err_bad_auth, and eventually call svc_authorise. That calls ->release == svcauth_gss_release, which tries to dereference rq_auth_data.
Signed-off-by: J. Bruce Fields bfields@redhat.com Link: https://lore.kernel.org/linux-nfs/3F1B347F-B809-478F-A1E9-0BE98E22B0F0@oracl... Signed-off-by: Chuck Lever chuck.lever@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/auth_gss/svcauth_gss.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index fd897d900d12..85ad23d9a8a9 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -1705,11 +1705,14 @@ static int svcauth_gss_release(struct svc_rqst *rqstp) { struct gss_svc_data *gsd = (struct gss_svc_data *)rqstp->rq_auth_data; - struct rpc_gss_wire_cred *gc = &gsd->clcred; + struct rpc_gss_wire_cred *gc; struct xdr_buf *resbuf = &rqstp->rq_res; int stat = -EINVAL; struct sunrpc_net *sn = net_generic(SVC_NET(rqstp), sunrpc_net_id);
+ if (!gsd) + goto out; + gc = &gsd->clcred; if (gc->gc_proc != RPC_GSS_PROC_DATA) goto out; /* Release can be called twice, but we only wrap once. */ @@ -1750,10 +1753,10 @@ svcauth_gss_release(struct svc_rqst *rqstp) if (rqstp->rq_cred.cr_group_info) put_group_info(rqstp->rq_cred.cr_group_info); rqstp->rq_cred.cr_group_info = NULL; - if (gsd->rsci) + if (gsd && gsd->rsci) { cache_put(&gsd->rsci->h, sn->rsc_cache); - gsd->rsci = NULL; - + gsd->rsci = NULL; + } return stat; }
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit cfa26ed1f9f885c2fd8f53ca492989d1e16d0199 ]
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB, not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace apps which translate the dB scale to a linear scale. With the logarithmic dB scale being of by a factor of 10 we loose all precision in the lower area of the range when apps translate things to a linear scale.
E.g. the 0 dB default, which corresponds with a value of 47 of the 0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.
Since the centi-dB values used in the TLV struct cannot represent the 0.375 dB step size used by these controls, change the TLV definition for them to specify a min and max value instead of min + stepsize.
Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc- vol-tlv values being off by a factor of 10") which made the exact same change to the rt5670 codec driver.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20210226143817.84287-2-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5640.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c index 3cc1135fc2cd..81fbbcaf8121 100644 --- a/sound/soc/codecs/rt5640.c +++ b/sound/soc/codecs/rt5640.c @@ -341,9 +341,9 @@ static bool rt5640_readable_register(struct device *dev, unsigned int reg) }
static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0); -static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0); +static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -6562, 0); static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0); -static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0); +static const DECLARE_TLV_DB_MINMAX(adc_vol_tlv, -1762, 3000); static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0);
/* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit eee51df776bd6cac10a76b2779a9fdee3f622b2b ]
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB, not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace apps which translate the dB scale to a linear scale. With the logarithmic dB scale being of by a factor of 10 we loose all precision in the lower area of the range when apps translate things to a linear scale.
E.g. the 0 dB default, which corresponds with a value of 47 of the 0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.
Since the centi-dB values used in the TLV struct cannot represent the 0.375 dB step size used by these controls, change the TLV definition for them to specify a min and max value instead of min + stepsize.
Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc- vol-tlv values being off by a factor of 10") which made the exact same change to the rt5670 codec driver.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20210226143817.84287-3-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5651.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c index f0c9e2562474..acd5c30694e8 100644 --- a/sound/soc/codecs/rt5651.c +++ b/sound/soc/codecs/rt5651.c @@ -287,9 +287,9 @@ static bool rt5651_readable_register(struct device *dev, unsigned int reg) }
static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0); -static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0); +static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -6562, 0); static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0); -static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0); +static const DECLARE_TLV_DB_MINMAX(adc_vol_tlv, -1762, 3000); static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0);
/* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */
From: Benjamin Rood benjaminjrood@gmail.com
[ Upstream commit f86f58e3594fb0ab1993d833d3b9a2496f3c928c ]
According to the SGTL5000 datasheet [1], the DAP_AVC_CTRL register has the following bit field definitions:
| BITS | FIELD | RW | RESET | DEFINITION | | 15 | RSVD | RO | 0x0 | Reserved | | 14 | RSVD | RW | 0x1 | Reserved | | 13:12 | MAX_GAIN | RW | 0x1 | Max Gain of AVC in expander mode | | 11:10 | RSVD | RO | 0x0 | Reserved | | 9:8 | LBI_RESP | RW | 0x1 | Integrator Response | | 7:6 | RSVD | RO | 0x0 | Reserved | | 5 | HARD_LMT_EN | RW | 0x0 | Enable hard limiter mode | | 4:1 | RSVD | RO | 0x0 | Reserved | | 0 | EN | RW | 0x0 | Enable/Disable AVC |
The original default value written to the DAP_AVC_CTRL register during sgtl5000_i2c_probe() was 0x0510. This would incorrectly write values to bits 4 and 10, which are defined as RESERVED. It would also not set bits 12 and 14 to their correct RESET values of 0x1, and instead set them to 0x0. While the DAP_AVC module is effectively disabled because the EN bit is 0, this default value is still writing invalid values to registers that are marked as read-only and RESERVED as well as not setting bits 12 and 14 to their correct default values as defined by the datasheet.
The correct value that should be written to the DAP_AVC_CTRL register is 0x5100, which configures the register bits to the default values defined by the datasheet, and prevents any writes to bits defined as 'read-only'. Generally speaking, it is best practice to NOT attempt to write values to registers/bits defined as RESERVED, as it generally produces unwanted/undefined behavior, or errors.
Also, all credit for this patch should go to my colleague Dan MacDonald dmacdonald@curbellmedical.com for finding this error in the first place.
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Signed-off-by: Benjamin Rood benjaminjrood@gmail.com Reviewed-by: Fabio Estevam festevam@gmail.com Link: https://lore.kernel.org/r/20210219183308.GA2117@ubuntu-dev Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/sgtl5000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 0c2a1413a8f5..14e564e38f3c 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -75,7 +75,7 @@ static const struct reg_default sgtl5000_reg_defaults[] = { { SGTL5000_DAP_EQ_BASS_BAND4, 0x002f }, { SGTL5000_DAP_MAIN_CHAN, 0x8000 }, { SGTL5000_DAP_MIX_CHAN, 0x0000 }, - { SGTL5000_DAP_AVC_CTRL, 0x0510 }, + { SGTL5000_DAP_AVC_CTRL, 0x5100 }, { SGTL5000_DAP_AVC_THRESHOLD, 0x1473 }, { SGTL5000_DAP_AVC_ATTACK, 0x0028 }, { SGTL5000_DAP_AVC_DECAY, 0x0050 },
From: Christophe Leroy christophe.leroy@csgroup.eu
[ Upstream commit eed5fae00593ab9d261a0c1ffc1bdb786a87a55a ]
The code relies on constant folding of cpu_has_feature() based on possible and always true values as defined per CPU_FTRS_ALWAYS and CPU_FTRS_POSSIBLE.
Build failure is encountered with for instance book3e_all_defconfig on kisskb in the AMDGPU driver which uses cpu_has_feature(CPU_FTR_VSX_COMP) to decide whether calling kernel_enable_vsx() or not.
The failure is due to cpu_has_feature() not being inlined with that configuration with gcc 4.9.
In the same way as commit acdad8fb4a15 ("powerpc: Force inlining of mmu_has_feature to fix build failure"), for inlining of cpu_has_feature().
Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/b231dfa040ce4cc37f702f5c3a595fdeabfe0462.161537820... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/include/asm/cpu_has_feature.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/cpu_has_feature.h b/arch/powerpc/include/asm/cpu_has_feature.h index 6e834caa3720..7b10b3ef7739 100644 --- a/arch/powerpc/include/asm/cpu_has_feature.h +++ b/arch/powerpc/include/asm/cpu_has_feature.h @@ -6,7 +6,7 @@ #include <linux/bug.h> #include <asm/cputable.h>
-static inline bool early_cpu_has_feature(unsigned long feature) +static __always_inline bool early_cpu_has_feature(unsigned long feature) { return !!((CPU_FTRS_ALWAYS & feature) || (CPU_FTRS_POSSIBLE & cur_cpu_spec->cpu_features & feature)); @@ -45,7 +45,7 @@ static __always_inline bool cpu_has_feature(unsigned long feature) return static_branch_likely(&cpu_feature_keys[i]); } #else -static inline bool cpu_has_feature(unsigned long feature) +static __always_inline bool cpu_has_feature(unsigned long feature) { return early_cpu_has_feature(feature); }
From: Laurent Vivier lvivier@redhat.com
[ Upstream commit beb691e69f4dec7bfe8b81b509848acfd1f0dbf9 ]
vhost_reset_is_le() is vhost_init_is_le(), and in the case of cross-endian legacy, vhost_init_is_le() depends on vq->user_be.
vq->user_be is set by vhost_disable_cross_endian().
But in vhost_vq_reset(), we have:
vhost_reset_is_le(vq); vhost_disable_cross_endian(vq);
And so user_be is used before being set.
To fix that, reverse the lines order as there is no other dependency between them.
Signed-off-by: Laurent Vivier lvivier@redhat.com Link: https://lore.kernel.org/r/20210312140913.788592-1-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin mst@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vhost/vhost.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index b14e62f11075..d2431afeda84 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -306,8 +306,8 @@ static void vhost_vq_reset(struct vhost_dev *dev, vq->call_ctx = NULL; vq->call = NULL; vq->log_ctx = NULL; - vhost_reset_is_le(vq); vhost_disable_cross_endian(vq); + vhost_reset_is_le(vq); vq->busyloop_timeout = 0; vq->umem = NULL; vq->iotlb = NULL;
From: Lv Yunlong lyl2019@mail.ustc.edu.cn
[ Upstream commit c8c165dea4c8f5ad67b1240861e4f6c5395fa4ac ]
In st_open(), if STp->in_use is true, STp will be freed by scsi_tape_put(). However, STp is still used by DEBC_printk() after. It is better to DEBC_printk() before scsi_tape_put().
Link: https://lore.kernel.org/r/20210311064636.10522-1-lyl2019@mail.ustc.edu.cn Acked-by: Kai Mäkisara kai.makisara@kolumbus.fi Signed-off-by: Lv Yunlong lyl2019@mail.ustc.edu.cn Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/st.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 618422ea3a41..0d58227431e4 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -1267,8 +1267,8 @@ static int st_open(struct inode *inode, struct file *filp) spin_lock(&st_use_lock); if (STp->in_use) { spin_unlock(&st_use_lock); - scsi_tape_put(STp); DEBC_printk(STp, "Device already in use.\n"); + scsi_tape_put(STp); return (-EBUSY); }
From: Alexey Dobriyan adobriyan@gmail.com
[ Upstream commit 5999b9e5b1f8a2f5417b755130919b3ac96f5550 ]
Only half of the file is under include guard because terminating #endif is placed too early.
Link: https://lore.kernel.org/r/YE4snvoW1SuwcXAn@localhost.localdomain Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Alexey Dobriyan adobriyan@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_target.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h index 07ea4fcf4f88..983ec09da650 100644 --- a/drivers/scsi/qla2xxx/qla_target.h +++ b/drivers/scsi/qla2xxx/qla_target.h @@ -112,7 +112,6 @@ (min(1270, ((ql) > 0) ? (QLA_TGT_DATASEGS_PER_CMD_24XX + \ QLA_TGT_DATASEGS_PER_CONT_24XX*((ql) - 1)) : 0)) #endif -#endif
#define GET_TARGET_ID(ha, iocb) ((HAS_EXTENDED_IDS(ha)) \ ? le16_to_cpu((iocb)->u.isp2x.target.extended) \ @@ -323,6 +322,7 @@ struct ctio_to_2xxx { #ifndef CTIO_RET_TYPE #define CTIO_RET_TYPE 0x17 /* CTIO return entry */ #define ATIO_TYPE7 0x06 /* Accept target I/O entry for 24xx */ +#endif
struct fcp_hdr { uint8_t r_ctl;
From: Tong Zhang ztong0001@gmail.com
[ Upstream commit 2e5848a3d86f03024ae096478bdb892ab3d79131 ]
request_irq() wont accept a name which contains slash so we need to repalce it with something else -- otherwise it will trigger a warning and the entry in /proc/irq/ will not be created since the .name might be used by userspace and we don't want to break userspace, so we are changing the parameters passed to request_irq()
[ 1.630764] name 'pci-das1602/16' [ 1.630950] WARNING: CPU: 0 PID: 181 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0 [ 1.634009] RIP: 0010:__xlate_proc_name+0x93/0xb0 [ 1.639441] Call Trace: [ 1.639976] proc_mkdir+0x18/0x20 [ 1.641946] request_threaded_irq+0xfe/0x160 [ 1.642186] cb_pcidas_auto_attach+0xf4/0x610 [cb_pcidas]
Suggested-by: Ian Abbott abbotti@mev.co.uk Reviewed-by: Ian Abbott abbotti@mev.co.uk Signed-off-by: Tong Zhang ztong0001@gmail.com Link: https://lore.kernel.org/r/20210315195914.4801-1-ztong0001@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/comedi/drivers/cb_pcidas.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c index 3ea15bb0e56e..15b9cc8531f0 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas.c +++ b/drivers/staging/comedi/drivers/cb_pcidas.c @@ -1290,7 +1290,7 @@ static int cb_pcidas_auto_attach(struct comedi_device *dev, devpriv->amcc + AMCC_OP_REG_INTCSR);
ret = request_irq(pcidev->irq, cb_pcidas_interrupt, IRQF_SHARED, - dev->board_name, dev); + "cb_pcidas", dev); if (ret) { dev_dbg(dev->class_dev, "unable to allocate irq %d\n", pcidev->irq);
From: Tong Zhang ztong0001@gmail.com
[ Upstream commit d2d106fe3badfc3bf0dd3899d1c3f210c7203eab ]
request_irq() wont accept a name which contains slash so we need to repalce it with something else -- otherwise it will trigger a warning and the entry in /proc/irq/ will not be created since the .name might be used by userspace and we don't want to break userspace, so we are changing the parameters passed to request_irq()
[ 1.565966] name 'pci-das6402/16' [ 1.566149] WARNING: CPU: 0 PID: 184 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0 [ 1.568923] RIP: 0010:__xlate_proc_name+0x93/0xb0 [ 1.574200] Call Trace: [ 1.574722] proc_mkdir+0x18/0x20 [ 1.576629] request_threaded_irq+0xfe/0x160 [ 1.576859] auto_attach+0x60a/0xc40 [cb_pcidas64]
Suggested-by: Ian Abbott abbotti@mev.co.uk Reviewed-by: Ian Abbott abbotti@mev.co.uk Signed-off-by: Tong Zhang ztong0001@gmail.com Link: https://lore.kernel.org/r/20210315195814.4692-1-ztong0001@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/comedi/drivers/cb_pcidas64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c index cb9c2699277e..b202df1dcba0 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas64.c +++ b/drivers/staging/comedi/drivers/cb_pcidas64.c @@ -4034,7 +4034,7 @@ static int auto_attach(struct comedi_device *dev, init_stc_registers(dev);
retval = request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED, - dev->board_name, dev); + "cb_pcidas64", dev); if (retval) { dev_dbg(dev->class_dev, "unable to allocate irq %u\n", pcidev->irq);
From: Sameer Pujar spujar@nvidia.com
[ Upstream commit dbf54a9534350d6aebbb34f5c1c606b81a4f35dd ]
Simple-card/audio-graph-card drivers do not handle MCLK clock when it is specified in the codec device node. The expectation here is that, the codec should actually own up the MCLK clock and do necessary setup in the driver.
Suggested-by: Mark Brown broonie@kernel.org Suggested-by: Michael Walle michael@walle.cc Signed-off-by: Sameer Pujar spujar@nvidia.com Link: https://lore.kernel.org/r/1615829492-8972-3-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5659.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/sound/soc/codecs/rt5659.c b/sound/soc/codecs/rt5659.c index 635818fcda00..21a007c26407 100644 --- a/sound/soc/codecs/rt5659.c +++ b/sound/soc/codecs/rt5659.c @@ -3389,12 +3389,17 @@ static int rt5659_set_dai_sysclk(struct snd_soc_dai *dai, struct snd_soc_codec *codec = dai->codec; struct rt5659_priv *rt5659 = snd_soc_codec_get_drvdata(codec); unsigned int reg_val = 0; + int ret;
if (freq == rt5659->sysclk && clk_id == rt5659->sysclk_src) return 0;
switch (clk_id) { case RT5659_SCLK_S_MCLK: + ret = clk_set_rate(rt5659->mclk, freq); + if (ret) + return ret; + reg_val |= RT5659_SCLK_SRC_MCLK; break; case RT5659_SCLK_S_PLL1:
From: "zhangyi (F)" yi.zhang@huawei.com
[ Upstream commit 5dccdc5a1916d4266edd251f20bbbb113a5c495f ]
In ext4_rename(), when RENAME_WHITEOUT failed to add new entry into directory, it ends up dropping new created whiteout inode under the running transaction. After commit <9b88f9fb0d2> ("ext4: Do not iput inode under running transaction"), we follow the assumptions that evict() does not get called from a transaction context but in ext4_rename() it breaks this suggestion. Although it's not a real problem, better to obey it, so this patch add inode to orphan list and stop transaction before final iput().
Signed-off-by: zhangyi (F) yi.zhang@huawei.com Link: https://lore.kernel.org/r/20210303131703.330415-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/namei.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 6224b0e6fb64..145774d52b6e 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -3590,7 +3590,7 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry, */ retval = -ENOENT; if (!old.bh || le32_to_cpu(old.de->inode) != old.inode->i_ino) - goto end_rename; + goto release_bh;
if ((old.dir != new.dir) && ext4_encrypted_inode(new.dir) && @@ -3604,7 +3604,7 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry, if (IS_ERR(new.bh)) { retval = PTR_ERR(new.bh); new.bh = NULL; - goto end_rename; + goto release_bh; } if (new.bh) { if (!new.inode) { @@ -3621,15 +3621,13 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry, handle = ext4_journal_start(old.dir, EXT4_HT_DIR, credits); if (IS_ERR(handle)) { retval = PTR_ERR(handle); - handle = NULL; - goto end_rename; + goto release_bh; } } else { whiteout = ext4_whiteout_for_rename(&old, credits, &handle); if (IS_ERR(whiteout)) { retval = PTR_ERR(whiteout); - whiteout = NULL; - goto end_rename; + goto release_bh; } }
@@ -3737,16 +3735,18 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry, ext4_setent(handle, &old, old.inode->i_ino, old_file_type); drop_nlink(whiteout); + ext4_orphan_add(handle, whiteout); } unlock_new_inode(whiteout); + ext4_journal_stop(handle); iput(whiteout); - + } else { + ext4_journal_stop(handle); } +release_bh: brelse(old.dir_bh); brelse(old.bh); brelse(new.bh); - if (handle) - ext4_journal_stop(handle); return retval; }
linux-stable-mirror@lists.linaro.org
-
Sasha Levin