From: Jason Gerecke jason.gerecke@wacom.com
The serial number and tool type information that is reported by the tablet while a pen is merely "in prox" instead of fully "in range" can be stale and cause us to report incorrect tool information. Serial number, tool type, and other information is only valid once the pen comes fully in range so we should be careful to not use this information until that point.
In particular, this issue may cause the driver to incorectly report BTN_TOOL_RUBBER after switching from the eraser tool back to the pen.
Fixes: a48324de6d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range") Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Jason Gerecke jason.gerecke@wacom.com Reviewed-by: Aaron Armstrong Skomra aaron.skomra@wacom.com --- drivers/hid/wacom_wac.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 747730d32ab6..4c1bc239207e 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -1236,13 +1236,13 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) /* Add back in missing bits of ID for non-USI pens */ wacom->id[0] |= (wacom->serial[0] >> 32) & 0xFFFFF; } - wacom->tool[0] = wacom_intuos_get_tool_type(wacom_intuos_id_mangle(wacom->id[0]));
for (i = 0; i < pen_frames; i++) { unsigned char *frame = &data[i*pen_frame_len + 1]; bool valid = frame[0] & 0x80; bool prox = frame[0] & 0x40; bool range = frame[0] & 0x20; + bool invert = frame[0] & 0x10;
if (!valid) continue; @@ -1251,9 +1251,24 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) wacom->shared->stylus_in_proximity = false; wacom_exit_report(wacom); input_sync(pen_input); + + wacom->tool[0] = 0; + wacom->id[0] = 0; + wacom->serial[0] = 0; return; } + if (range) { + if (!wacom->tool[0]) { /* first in range */ + /* Going into range select tool */ + if (invert) + wacom->tool[0] = BTN_TOOL_RUBBER; + else if (wacom->id[0]) + wacom->tool[0] = wacom_intuos_get_tool_type(wacom->id[0]); + else + wacom->tool[0] = BTN_TOOL_PEN; + } + input_report_abs(pen_input, ABS_X, get_unaligned_le16(&frame[1])); input_report_abs(pen_input, ABS_Y, get_unaligned_le16(&frame[3]));
From: Jason Gerecke jason.gerecke@wacom.com
If the tool spends some time in prox before entering range, a series of events (e.g. ABS_DISTANCE, MSC_SERIAL) can be sent before we or userspace have any clue about the pen whose data is being reported. We need to hold off on reporting anything until the pen has entered range. Since we still want to report events that occur "in prox" after the pen has *left* range we use 'wacom-tool[0]' as the indicator that the pen did at one point enter range and provide us/userspace with tool type and serial number information.
Fixes: a48324de6d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range") Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Jason Gerecke jason.gerecke@wacom.com Reviewed-by: Aaron Armstrong Skomra aaron.skomra@wacom.com --- drivers/hid/wacom_wac.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-)
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 4c1bc239207e..613342bb9d6b 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -1290,23 +1290,26 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) get_unaligned_le16(&frame[11])); } } - input_report_abs(pen_input, ABS_PRESSURE, get_unaligned_le16(&frame[5])); - if (wacom->features.type == INTUOSP2_BT) { - input_report_abs(pen_input, ABS_DISTANCE, - range ? frame[13] : wacom->features.distance_max); - } else { - input_report_abs(pen_input, ABS_DISTANCE, - range ? frame[7] : wacom->features.distance_max); - }
- input_report_key(pen_input, BTN_TOUCH, frame[0] & 0x01); - input_report_key(pen_input, BTN_STYLUS, frame[0] & 0x02); - input_report_key(pen_input, BTN_STYLUS2, frame[0] & 0x04); + if (wacom->tool[0]) { + input_report_abs(pen_input, ABS_PRESSURE, get_unaligned_le16(&frame[5])); + if (wacom->features.type == INTUOSP2_BT) { + input_report_abs(pen_input, ABS_DISTANCE, + range ? frame[13] : wacom->features.distance_max); + } else { + input_report_abs(pen_input, ABS_DISTANCE, + range ? frame[7] : wacom->features.distance_max); + } + + input_report_key(pen_input, BTN_TOUCH, frame[0] & 0x01); + input_report_key(pen_input, BTN_STYLUS, frame[0] & 0x02); + input_report_key(pen_input, BTN_STYLUS2, frame[0] & 0x04);
- input_report_key(pen_input, wacom->tool[0], prox); - input_event(pen_input, EV_MSC, MSC_SERIAL, wacom->serial[0]); - input_report_abs(pen_input, ABS_MISC, - wacom_intuos_id_mangle(wacom->id[0])); /* report tool id */ + input_report_key(pen_input, wacom->tool[0], prox); + input_event(pen_input, EV_MSC, MSC_SERIAL, wacom->serial[0]); + input_report_abs(pen_input, ABS_MISC, + wacom_intuos_id_mangle(wacom->id[0])); /* report tool id */ + }
wacom->shared->stylus_in_proximity = prox;
Haven't heard anything back from you about this patch set, Benjamin. Just making sure it doesn't get lost down a crack :)
Jason --- Now instead of four in the eights place / you’ve got three, ‘Cause you added one / (That is to say, eight) to the two, / But you can’t take seven from three, / So you look at the sixty-fours....
On Wed, Apr 24, 2019 at 3:13 PM Gerecke, Jason killertofu@gmail.com wrote:
From: Jason Gerecke jason.gerecke@wacom.com
The serial number and tool type information that is reported by the tablet while a pen is merely "in prox" instead of fully "in range" can be stale and cause us to report incorrect tool information. Serial number, tool type, and other information is only valid once the pen comes fully in range so we should be careful to not use this information until that point.
In particular, this issue may cause the driver to incorectly report BTN_TOOL_RUBBER after switching from the eraser tool back to the pen.
Fixes: a48324de6d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range") Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Jason Gerecke jason.gerecke@wacom.com Reviewed-by: Aaron Armstrong Skomra aaron.skomra@wacom.com
drivers/hid/wacom_wac.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 747730d32ab6..4c1bc239207e 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -1236,13 +1236,13 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) /* Add back in missing bits of ID for non-USI pens */ wacom->id[0] |= (wacom->serial[0] >> 32) & 0xFFFFF; }
wacom->tool[0] = wacom_intuos_get_tool_type(wacom_intuos_id_mangle(wacom->id[0])); for (i = 0; i < pen_frames; i++) { unsigned char *frame = &data[i*pen_frame_len + 1]; bool valid = frame[0] & 0x80; bool prox = frame[0] & 0x40; bool range = frame[0] & 0x20;
bool invert = frame[0] & 0x10; if (!valid) continue;@@ -1251,9 +1251,24 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) wacom->shared->stylus_in_proximity = false; wacom_exit_report(wacom); input_sync(pen_input);
wacom->tool[0] = 0;wacom->id[0] = 0;wacom->serial[0] = 0; return; }if (range) {if (!wacom->tool[0]) { /* first in range *//* Going into range select tool */if (invert)wacom->tool[0] = BTN_TOOL_RUBBER;else if (wacom->id[0])wacom->tool[0] = wacom_intuos_get_tool_type(wacom->id[0]);elsewacom->tool[0] = BTN_TOOL_PEN;}input_report_abs(pen_input, ABS_X, get_unaligned_le16(&frame[1])); input_report_abs(pen_input, ABS_Y, get_unaligned_le16(&frame[3]));-- 2.21.0
On Thu, Apr 25, 2019 at 12:13 AM Gerecke, Jason killertofu@gmail.com wrote:
From: Jason Gerecke jason.gerecke@wacom.com
The serial number and tool type information that is reported by the tablet while a pen is merely "in prox" instead of fully "in range" can be stale and cause us to report incorrect tool information. Serial number, tool type, and other information is only valid once the pen comes fully in range so we should be careful to not use this information until that point.
In particular, this issue may cause the driver to incorectly report BTN_TOOL_RUBBER after switching from the eraser tool back to the pen.
Fixes: a48324de6d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range") Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Jason Gerecke jason.gerecke@wacom.com Reviewed-by: Aaron Armstrong Skomra aaron.skomra@wacom.com
Series applied to for-5.2/fixes
Sorry for the delay
Cheers, Benjamin
drivers/hid/wacom_wac.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 747730d32ab6..4c1bc239207e 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -1236,13 +1236,13 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) /* Add back in missing bits of ID for non-USI pens */ wacom->id[0] |= (wacom->serial[0] >> 32) & 0xFFFFF; }
wacom->tool[0] = wacom_intuos_get_tool_type(wacom_intuos_id_mangle(wacom->id[0])); for (i = 0; i < pen_frames; i++) { unsigned char *frame = &data[i*pen_frame_len + 1]; bool valid = frame[0] & 0x80; bool prox = frame[0] & 0x40; bool range = frame[0] & 0x20;
bool invert = frame[0] & 0x10; if (!valid) continue;@@ -1251,9 +1251,24 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) wacom->shared->stylus_in_proximity = false; wacom_exit_report(wacom); input_sync(pen_input);
wacom->tool[0] = 0;wacom->id[0] = 0;wacom->serial[0] = 0; return; }if (range) {if (!wacom->tool[0]) { /* first in range *//* Going into range select tool */if (invert)wacom->tool[0] = BTN_TOOL_RUBBER;else if (wacom->id[0])wacom->tool[0] = wacom_intuos_get_tool_type(wacom->id[0]);elsewacom->tool[0] = BTN_TOOL_PEN;}input_report_abs(pen_input, ABS_X, get_unaligned_le16(&frame[1])); input_report_abs(pen_input, ABS_Y, get_unaligned_le16(&frame[3]));-- 2.21.0
linux-stable-mirror@lists.linaro.org
-
Benjamin Tissoires -
Gerecke, Jason -
Jason Gerecke