From: Xiaochen Shen xiaochen.shen@intel.com

commit b8511ccc75c033f6d54188ea4df7bf1e85778740 upstream.

A resource group (rdtgrp) contains a reference count (rdtgrp->waitcount) that indicates how many waiters expect this rdtgrp to exist. Waiters could be waiting on rdtgroup_mutex or some work sitting on a task's workqueue for when the task returns from kernel mode or exits.

The deletion of a rdtgrp is intended to have two phases:

(1) while holding rdtgroup_mutex the necessary cleanup is done and rdtgrp->flags is set to RDT_DELETED,

(2) after releasing the rdtgroup_mutex, the rdtgrp structure is freed only if there are no waiters and its flag is set to RDT_DELETED. Upon gaining access to rdtgroup_mutex or rdtgrp, a waiter is required to check for the RDT_DELETED flag.

When unmounting the resctrl file system or deleting ctrl_mon groups, all of the subdirectories are removed and the data structure of rdtgrp is forcibly freed without checking rdtgrp->waitcount. If at this point there was a waiter on rdtgrp then a use-after-free issue occurs when the waiter starts running and accesses the rdtgrp structure it was waiting on.

See kfree() calls in [1], [2] and [3] in these two call paths in following scenarios: (1) rdt_kill_sb() -> rmdir_all_sub() -> free_all_child_rdtgrp() (2) rdtgroup_rmdir() -> rdtgroup_rmdir_ctrl() -> free_all_child_rdtgrp()

There are several scenarios that result in use-after-free issue in following:

Scenario 1: ----------- In Thread 1, rdtgroup_tasks_write() adds a task_work callback move_myself(). If move_myself() is scheduled to execute after Thread 2 rdt_kill_sb() is finished, referring to earlier rdtgrp memory (rdtgrp->waitcount) which was already freed in Thread 2 results in use-after-free issue.

Thread 1 (rdtgroup_tasks_write) Thread 2 (rdt_kill_sb) ------------------------------- ---------------------- rdtgroup_kn_lock_live atomic_inc(&rdtgrp->waitcount) mutex_lock rdtgroup_move_task __rdtgroup_move_task /* * Take an extra refcount, so rdtgrp cannot be freed * before the call back move_myself has been invoked */ atomic_inc(&rdtgrp->waitcount) /* Callback move_myself will be scheduled for later */ task_work_add(move_myself) rdtgroup_kn_unlock mutex_unlock atomic_dec_and_test(&rdtgrp->waitcount) && (flags & RDT_DELETED) mutex_lock rmdir_all_sub /* * sentry and rdtgrp are freed * without checking refcount */ free_all_child_rdtgrp kfree(sentry)*[1] kfree(rdtgrp)*[2] mutex_unlock /* * Callback is scheduled to execute * after rdt_kill_sb is finished */ move_myself /* * Use-after-free: refer to earlier rdtgrp * memory which was freed in [1] or [2]. */ atomic_dec_and_test(&rdtgrp->waitcount) && (flags & RDT_DELETED) kfree(rdtgrp)

Scenario 2: ----------- In Thread 1, rdtgroup_tasks_write() adds a task_work callback move_myself(). If move_myself() is scheduled to execute after Thread 2 rdtgroup_rmdir() is finished, referring to earlier rdtgrp memory (rdtgrp->waitcount) which was already freed in Thread 2 results in use-after-free issue.

Thread 1 (rdtgroup_tasks_write) Thread 2 (rdtgroup_rmdir) ------------------------------- ------------------------- rdtgroup_kn_lock_live atomic_inc(&rdtgrp->waitcount) mutex_lock rdtgroup_move_task __rdtgroup_move_task /* * Take an extra refcount, so rdtgrp cannot be freed * before the call back move_myself has been invoked */ atomic_inc(&rdtgrp->waitcount) /* Callback move_myself will be scheduled for later */ task_work_add(move_myself) rdtgroup_kn_unlock mutex_unlock atomic_dec_and_test(&rdtgrp->waitcount) && (flags & RDT_DELETED) rdtgroup_kn_lock_live atomic_inc(&rdtgrp->waitcount) mutex_lock rdtgroup_rmdir_ctrl free_all_child_rdtgrp /* * sentry is freed without * checking refcount */ kfree(sentry)*[3] rdtgroup_ctrl_remove rdtgrp->flags = RDT_DELETED rdtgroup_kn_unlock mutex_unlock atomic_dec_and_test( &rdtgrp->waitcount) && (flags & RDT_DELETED) kfree(rdtgrp) /* * Callback is scheduled to execute * after rdt_kill_sb is finished */ move_myself /* * Use-after-free: refer to earlier rdtgrp * memory which was freed in [3]. */ atomic_dec_and_test(&rdtgrp->waitcount) && (flags & RDT_DELETED) kfree(rdtgrp)

If CONFIG_DEBUG_SLAB=y, Slab corruption on kmalloc-2k can be observed like following. Note that "0x6b" is POISON_FREE after kfree(). The corrupted bits "0x6a", "0x64" at offset 0x424 correspond to waitcount member of struct rdtgroup which was freed:

Slab corruption (Not tainted): kmalloc-2k start=ffff9504c5b0d000, len=2048 420: 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkjkkkkkkkkkkk Single bit error detected. Probably bad RAM. Run memtest86+ or a similar memory test tool. Next obj: start=ffff9504c5b0d800, len=2048 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk

Slab corruption (Not tainted): kmalloc-2k start=ffff9504c58ab800, len=2048 420: 6b 6b 6b 6b 64 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkdkkkkkkkkkkk Prev obj: start=ffff9504c58ab000, len=2048 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk

Fix this by taking reference count (waitcount) of rdtgrp into account in the two call paths that currently do not do so. Instead of always freeing the resource group it will only be freed if there are no waiters on it. If there are waiters, the resource group will have its flags set to RDT_DELETED.

It will be left to the waiter to free the resource group when it starts running and finding that it was the last waiter and the resource group has been removed (rdtgrp->flags & RDT_DELETED) since. (1) rdt_kill_sb() -> rmdir_all_sub() -> free_all_child_rdtgrp() (2) rdtgroup_rmdir() -> rdtgroup_rmdir_ctrl() -> free_all_child_rdtgrp()

Backporting notes:

Since upstream commit fa7d949337cc ("x86/resctrl: Rename and move rdt files to a separate directory"), the file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c has been renamed and moved to arch/x86/kernel/cpu/resctrl/rdtgroup.c.

Apply the change against file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c in older stable trees.

Fixes: f3cbeacaa06e ("x86/intel_rdt/cqm: Add rmdir support") Fixes: 60cf5e101fd4 ("x86/intel_rdt: Add mkdir to resctrl file system") Suggested-by: Reinette Chatre reinette.chatre@intel.com Signed-off-by: Xiaochen Shen xiaochen.shen@intel.com Signed-off-by: Borislav Petkov bp@suse.de Reviewed-by: Reinette Chatre reinette.chatre@intel.com Reviewed-by: Tony Luck tony.luck@intel.com Acked-by: Thomas Gleixner tglx@linutronix.de Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1578500886-21771-2-git-send-email-xiaochen.shen@in... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c index 841a0246eb897..db22ba0bf9167 100644 --- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c +++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c @@ -2167,7 +2167,11 @@ static void free_all_child_rdtgrp(struct rdtgroup *rdtgrp) list_for_each_entry_safe(sentry, stmp, head, mon.crdtgrp_list) { free_rmid(sentry->mon.rmid); list_del(&sentry->mon.crdtgrp_list); - kfree(sentry); + + if (atomic_read(&sentry->waitcount) != 0) + sentry->flags = RDT_DELETED; + else + kfree(sentry); } }

@@ -2205,7 +2209,11 @@ static void rmdir_all_sub(void)

kernfs_remove(rdtgrp->kn); list_del(&rdtgrp->rdtgroup_list); - kfree(rdtgrp); + + if (atomic_read(&rdtgrp->waitcount) != 0) + rdtgrp->flags = RDT_DELETED; + else + kfree(rdtgrp); } /* Notify online CPUs to update per cpu storage and PQR_ASSOC MSR */ update_closid_rmid(cpu_online_mask, &rdtgroup_default);

From: Xiaochen Shen xiaochen.shen@intel.com

commit 334b0f4e9b1b4a1d475f803419d202f6c5e4d18e upstream.

There is a race condition which results in a deadlock when rmdir and mkdir execute concurrently:

$ ls /sys/fs/resctrl/c1/mon_groups/m1/ cpus cpus_list mon_data tasks

Thread 1: rmdir /sys/fs/resctrl/c1 Thread 2: mkdir /sys/fs/resctrl/c1/mon_groups/m1

3 locks held by mkdir/48649: #0: (sb_writers#17){.+.+}, at: [<ffffffffb4ca2aa0>] mnt_want_write+0x20/0x50 #1: (&type->i_mutex_dir_key#8/1){+.+.}, at: [<ffffffffb4c8c13b>] filename_create+0x7b/0x170 #2: (rdtgroup_mutex){+.+.}, at: [<ffffffffb4a4389d>] rdtgroup_kn_lock_live+0x3d/0x70

4 locks held by rmdir/48652: #0: (sb_writers#17){.+.+}, at: [<ffffffffb4ca2aa0>] mnt_want_write+0x20/0x50 #1: (&type->i_mutex_dir_key#8/1){+.+.}, at: [<ffffffffb4c8c3cf>] do_rmdir+0x13f/0x1e0 #2: (&type->i_mutex_dir_key#8){++++}, at: [<ffffffffb4c86d5d>] vfs_rmdir+0x4d/0x120 #3: (rdtgroup_mutex){+.+.}, at: [<ffffffffb4a4389d>] rdtgroup_kn_lock_live+0x3d/0x70

Thread 1 is deleting control group "c1". Holding rdtgroup_mutex, kernfs_remove() removes all kernfs nodes under directory "c1" recursively, then waits for sub kernfs node "mon_groups" to drop active reference.

Thread 2 is trying to create a subdirectory "m1" in the "mon_groups" directory. The wrapper kernfs_iop_mkdir() takes an active reference to the "mon_groups" directory but the code drops the active reference to the parent directory "c1" instead.

As a result, Thread 1 is blocked on waiting for active reference to drop and never release rdtgroup_mutex, while Thread 2 is also blocked on trying to get rdtgroup_mutex.

Thread 1 (rdtgroup_rmdir) Thread 2 (rdtgroup_mkdir) (rmdir /sys/fs/resctrl/c1) (mkdir /sys/fs/resctrl/c1/mon_groups/m1) ------------------------- ------------------------- kernfs_iop_mkdir /* * kn: "m1", parent_kn: "mon_groups", * prgrp_kn: parent_kn->parent: "c1", * * "mon_groups", parent_kn->active++: 1 */ kernfs_get_active(parent_kn) kernfs_iop_rmdir /* "c1", kn->active++ */ kernfs_get_active(kn)

rdtgroup_kn_lock_live atomic_inc(&rdtgrp->waitcount) /* "c1", kn->active-- */ kernfs_break_active_protection(kn) mutex_lock

rdtgroup_rmdir_ctrl free_all_child_rdtgrp sentry->flags = RDT_DELETED

rdtgroup_ctrl_remove rdtgrp->flags = RDT_DELETED kernfs_get(kn) kernfs_remove(rdtgrp->kn) __kernfs_remove /* "mon_groups", sub_kn */ atomic_add(KN_DEACTIVATED_BIAS, &sub_kn->active) kernfs_drain(sub_kn) /* * sub_kn->active == KN_DEACTIVATED_BIAS + 1, * waiting on sub_kn->active to drop, but it * never drops in Thread 2 which is blocked * on getting rdtgroup_mutex. */ Thread 1 hangs here ----> wait_event(sub_kn->active == KN_DEACTIVATED_BIAS) ... rdtgroup_mkdir rdtgroup_mkdir_mon(parent_kn, prgrp_kn) mkdir_rdt_prepare(parent_kn, prgrp_kn) rdtgroup_kn_lock_live(prgrp_kn) atomic_inc(&rdtgrp->waitcount) /* * "c1", prgrp_kn->active-- * * The active reference on "c1" is * dropped, but not matching the * actual active reference taken * on "mon_groups", thus causing * Thread 1 to wait forever while * holding rdtgroup_mutex. */ kernfs_break_active_protection( prgrp_kn) /* * Trying to get rdtgroup_mutex * which is held by Thread 1. */ Thread 2 hangs here ----> mutex_lock ...

The problem is that the creation of a subdirectory in the "mon_groups" directory incorrectly releases the active protection of its parent directory instead of itself before it starts waiting for rdtgroup_mutex. This is triggered by the rdtgroup_mkdir() flow calling rdtgroup_kn_lock_live()/rdtgroup_kn_unlock() with kernfs node of the parent control group ("c1") as argument. It should be called with kernfs node "mon_groups" instead. What is currently missing is that the kn->priv of "mon_groups" is NULL instead of pointing to the rdtgrp.

Fix it by pointing kn->priv to rdtgrp when "mon_groups" is created. Then it could be passed to rdtgroup_kn_lock_live()/rdtgroup_kn_unlock() instead. And then it operates on the same rdtgroup structure but handles the active reference of kernfs node "mon_groups" to prevent deadlock. The same changes are also made to the "mon_data" directories.

This results in some unused function parameters that will be cleaned up in follow-up patch as the focus here is on the fix only in support of backporting efforts.

Backporting notes:

Since upstream commit fa7d949337cc ("x86/resctrl: Rename and move rdt files to a separate directory"), the file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c has been renamed and moved to arch/x86/kernel/cpu/resctrl/rdtgroup.c. Apply the change against file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c for older stable trees.

Fixes: c7d9aac61311 ("x86/intel_rdt/cqm: Add mkdir support for RDT monitoring") Suggested-by: Reinette Chatre reinette.chatre@intel.com Signed-off-by: Xiaochen Shen xiaochen.shen@intel.com Signed-off-by: Borislav Petkov bp@suse.de Reviewed-by: Reinette Chatre reinette.chatre@intel.com Reviewed-by: Tony Luck tony.luck@intel.com Acked-by: Thomas Gleixner tglx@linutronix.de Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1578500886-21771-4-git-send-email-xiaochen.shen@in... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c index 77770caeea242..11c5accfa4db5 100644 --- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c +++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c @@ -2005,7 +2005,7 @@ static struct dentry *rdt_mount(struct file_system_type *fs_type,

if (rdt_mon_capable) { ret = mongroup_create_dir(rdtgroup_default.kn, - NULL, "mon_groups", + &rdtgroup_default, "mon_groups", &kn_mongrp); if (ret) { dentry = ERR_PTR(ret); @@ -2415,7 +2415,7 @@ static int mkdir_mondata_all(struct kernfs_node *parent_kn, /* * Create the mon_data directory first. */ - ret = mongroup_create_dir(parent_kn, NULL, "mon_data", &kn); + ret = mongroup_create_dir(parent_kn, prgrp, "mon_data", &kn); if (ret) return ret;

@@ -2568,7 +2568,7 @@ static int mkdir_rdt_prepare(struct kernfs_node *parent_kn, uint files = 0; int ret;

- prdtgrp = rdtgroup_kn_lock_live(prgrp_kn); + prdtgrp = rdtgroup_kn_lock_live(parent_kn); rdt_last_cmd_clear(); if (!prdtgrp) { ret = -ENODEV; @@ -2643,7 +2643,7 @@ static int mkdir_rdt_prepare(struct kernfs_node *parent_kn, kernfs_activate(kn);

/* - * The caller unlocks the prgrp_kn upon success. + * The caller unlocks the parent_kn upon success. */ return 0;

@@ -2654,7 +2654,7 @@ static int mkdir_rdt_prepare(struct kernfs_node *parent_kn, out_free_rgrp: kfree(rdtgrp); out_unlock: - rdtgroup_kn_unlock(prgrp_kn); + rdtgroup_kn_unlock(parent_kn); return ret; }

@@ -2692,7 +2692,7 @@ static int rdtgroup_mkdir_mon(struct kernfs_node *parent_kn, */ list_add_tail(&rdtgrp->mon.crdtgrp_list, &prgrp->mon.crdtgrp_list);

- rdtgroup_kn_unlock(prgrp_kn); + rdtgroup_kn_unlock(parent_kn); return ret; }

@@ -2735,7 +2735,7 @@ static int rdtgroup_mkdir_ctrl_mon(struct kernfs_node *parent_kn, * Create an empty mon_groups directory to hold the subset * of tasks and cpus to monitor. */ - ret = mongroup_create_dir(kn, NULL, "mon_groups", NULL); + ret = mongroup_create_dir(kn, rdtgrp, "mon_groups", NULL); if (ret) { rdt_last_cmd_puts("kernfs subdir error\n"); goto out_del_list; @@ -2751,7 +2751,7 @@ static int rdtgroup_mkdir_ctrl_mon(struct kernfs_node *parent_kn, out_common_fail: mkdir_rdt_prepare_clean(rdtgrp); out_unlock: - rdtgroup_kn_unlock(prgrp_kn); + rdtgroup_kn_unlock(parent_kn); return ret; }

From: Siva Rebbagondla siva.rebbagondla@redpinesignals.com

[ Upstream commit cbde979b33fa16e06dadc2c81093699a2bc787db ]

As we missed to detach HCI, while entering power off or hibernation, an extra hci interface gets created whenever system is woken up, to avoid this we added hci_detach() in rsi_disconnect(), rsi_freeze(), and rsi_shutdown() functions which are invoked for these tests. This patch fixes the issue

Signed-off-by: Siva Rebbagondla siva.rebbagondla@redpinesignals.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/rsi/rsi_91x_sdio.c | 18 ++++++++++++++++++ drivers/net/wireless/rsi/rsi_91x_usb.c | 7 +++++++ 2 files changed, 25 insertions(+)

diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c index 5733e440ecaff..81cc1044532d1 100644 --- a/drivers/net/wireless/rsi/rsi_91x_sdio.c +++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c @@ -1129,6 +1129,12 @@ static void rsi_disconnect(struct sdio_func *pfunction) rsi_mac80211_detach(adapter); mdelay(10);

+ if (IS_ENABLED(CONFIG_RSI_COEX) && adapter->priv->coex_mode > 1 && + adapter->priv->bt_adapter) { + rsi_bt_ops.detach(adapter->priv->bt_adapter); + adapter->priv->bt_adapter = NULL; + } + /* Reset Chip */ rsi_reset_chip(adapter);

@@ -1305,6 +1311,12 @@ static int rsi_freeze(struct device *dev) rsi_dbg(ERR_ZONE, "##### Device can not wake up through WLAN\n");

+ if (IS_ENABLED(CONFIG_RSI_COEX) && common->coex_mode > 1 && + common->bt_adapter) { + rsi_bt_ops.detach(common->bt_adapter); + common->bt_adapter = NULL; + } + ret = rsi_sdio_disable_interrupts(pfunction);

if (sdev->write_fail) @@ -1352,6 +1364,12 @@ static void rsi_shutdown(struct device *dev) if (rsi_config_wowlan(adapter, wowlan)) rsi_dbg(ERR_ZONE, "Failed to configure WoWLAN\n");

+ if (IS_ENABLED(CONFIG_RSI_COEX) && adapter->priv->coex_mode > 1 && + adapter->priv->bt_adapter) { + rsi_bt_ops.detach(adapter->priv->bt_adapter); + adapter->priv->bt_adapter = NULL; + } + rsi_sdio_disable_interrupts(sdev->pfunction);

if (sdev->write_fail) diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c index 90eb749e2b616..c62e7e0f82f32 100644 --- a/drivers/net/wireless/rsi/rsi_91x_usb.c +++ b/drivers/net/wireless/rsi/rsi_91x_usb.c @@ -818,6 +818,13 @@ static void rsi_disconnect(struct usb_interface *pfunction) return;

rsi_mac80211_detach(adapter); + + if (IS_ENABLED(CONFIG_RSI_COEX) && adapter->priv->coex_mode > 1 && + adapter->priv->bt_adapter) { + rsi_bt_ops.detach(adapter->priv->bt_adapter); + adapter->priv->bt_adapter = NULL; + } + rsi_reset_card(adapter); rsi_deinit_usb_interface(adapter); rsi_91x_deinit(adapter);

From: Andres Freund andres@anarazel.de

commit c1c8013ec34d7163431d18367808ea40b2e305f8 upstream.

Commit 722ddfde366f ("perf tools: Fix time sorting") changed - correctly so - hist_entry__sort to return int64. Unfortunately several of the builtin-c2c.c comparison routines only happened to work due the cast caused by the wrong return type.

This causes meaningless ordering of both the cacheline list, and the cacheline details page. E.g a simple:

perf c2c record -a sleep 3 perf c2c report

will result in cacheline table like ================================================= Shared Data Cache Line Table ================================================= # # ------- Cacheline ---------- Total Tot - LLC Load Hitm - - Store Reference - - Load Dram - LLC Total - Core Load Hit - - LLC Load Hit - # Index Address Node PA cnt records Hitm Total Lcl Rmt Total L1Hit L1Miss Lcl Rmt Ld Miss Loads FB L1 L2 Llc Rmt # ..... .............. .... ...... ....... ...... ..... ..... ... .... ..... ...... ...... .... ...... ..... ..... ..... ... .... .......

0 0x7f0d27ffba00 N/A 0 52 0.12% 13 6 7 12 12 0 0 7 14 40 4 16 0 0 0 1 0x7f0d27ff61c0 N/A 0 6353 14.04% 1475 801 674 779 779 0 0 718 1392 5574 1299 1967 0 115 0 2 0x7f0d26d3ec80 N/A 0 71 0.15% 16 4 12 13 13 0 0 12 24 58 1 20 0 9 0 3 0x7f0d26d3ec00 N/A 0 98 0.22% 23 17 6 19 19 0 0 6 12 79 0 40 0 10 0

i.e. with the list not being ordered by Total Hitm.

Fixes: 722ddfde366f ("perf tools: Fix time sorting") Signed-off-by: Andres Freund andres@anarazel.de Tested-by: Michael Petlan mpetlan@redhat.com Acked-by: Jiri Olsa jolsa@redhat.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Andi Kleen ak@linux.intel.com Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: stable@vger.kernel.org # v3.16+ Link: http://lore.kernel.org/lkml/20200109043030.233746-1-andres@anarazel.de Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- tools/perf/builtin-c2c.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/tools/perf/builtin-c2c.c +++ b/tools/perf/builtin-c2c.c @@ -586,8 +586,8 @@ tot_hitm_cmp(struct perf_hpp_fmt *fmt __ { struct c2c_hist_entry *c2c_left; struct c2c_hist_entry *c2c_right; - unsigned int tot_hitm_left; - unsigned int tot_hitm_right; + uint64_t tot_hitm_left; + uint64_t tot_hitm_right;

c2c_left = container_of(left, struct c2c_hist_entry, he); c2c_right = container_of(right, struct c2c_hist_entry, he); @@ -620,7 +620,8 @@ __f ## _cmp(struct perf_hpp_fmt *fmt __m \ c2c_left = container_of(left, struct c2c_hist_entry, he); \ c2c_right = container_of(right, struct c2c_hist_entry, he); \ - return c2c_left->stats.__f - c2c_right->stats.__f; \ + return (uint64_t) c2c_left->stats.__f - \ + (uint64_t) c2c_right->stats.__f; \ }

#define STAT_FN(__f) \ @@ -673,7 +674,8 @@ ld_llcmiss_cmp(struct perf_hpp_fmt *fmt c2c_left = container_of(left, struct c2c_hist_entry, he); c2c_right = container_of(right, struct c2c_hist_entry, he);

- return llc_miss(&c2c_left->stats) - llc_miss(&c2c_right->stats); + return (uint64_t) llc_miss(&c2c_left->stats) - + (uint64_t) llc_miss(&c2c_right->stats); }

static uint64_t total_records(struct c2c_stats *stats)

From: Vitaly Chikunov vt@altlinux.org

commit 6c4798d3f08b81c2c52936b10e0fa872590c96ae upstream.

Disable a couple of compilation warnings (which are treated as errors) on strlcpy() definition and declaration, allowing users to compile perf and kernel (objtool) when:

1. glibc have strlcpy() (such as in ALT Linux since 2004) objtool and perf build fails with this (in gcc):

In file included from exec-cmd.c:3: tools/include/linux/string.h:20:15: error: redundant redeclaration of ‘strlcpy’ [-Werror=redundant-decls] 20 | extern size_t strlcpy(char *dest, const char *src, size_t size);

2. clang ignores `-Wredundant-decls', but produces another warning when building perf:

CC util/string.o ../lib/string.c:99:8: error: attribute declaration must precede definition [-Werror,-Wignored-attributes] size_t __weak strlcpy(char *dest, const char *src, size_t size) ../../tools/include/linux/compiler.h:66:34: note: expanded from macro '__weak' # define __weak __attribute__((weak)) /usr/include/bits/string_fortified.h:151:8: note: previous definition is here __NTH (strlcpy (char *__restrict __dest, const char *__restrict __src,

Committer notes:

The

#pragma GCC diagnostic

directive was introduced in gcc 4.6, so check for that as well.

Fixes: ce99091 ("perf tools: Move strlcpy() from perf to tools/lib/string.c") Fixes: 0215d59 ("tools lib: Reinstate strlcpy() header guard with __UCLIBC__") Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=118481 Signed-off-by: Vitaly Chikunov vt@altlinux.org Reviewed-by: Dmitry Levin ldv@altlinux.org Cc: Dmitry Levin ldv@altlinux.org Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: kbuild test robot lkp@intel.com Cc: Peter Zijlstra peterz@infradead.org Cc: stable@vger.kernel.org Cc: Vineet Gupta vineet.gupta1@synopsys.com Link: http://lore.kernel.org/lkml/20191224172029.19690-1-vt@altlinux.org Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- tools/include/linux/string.h | 8 ++++++++ tools/lib/string.c | 7 +++++++ 2 files changed, 15 insertions(+)

--- a/tools/include/linux/string.h +++ b/tools/include/linux/string.h @@ -14,7 +14,15 @@ int strtobool(const char *s, bool *res); * However uClibc headers also define __GLIBC__ hence the hack below */ #if defined(__GLIBC__) && !defined(__UCLIBC__) +// pragma diagnostic was introduced in gcc 4.6 +#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6) +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wredundant-decls" +#endif extern size_t strlcpy(char *dest, const char *src, size_t size); +#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6) +#pragma GCC diagnostic pop +#endif #endif

char *str_error_r(int errnum, char *buf, size_t buflen); --- a/tools/lib/string.c +++ b/tools/lib/string.c @@ -95,6 +95,10 @@ int strtobool(const char *s, bool *res) * If libc has strlcpy() then that version will override this * implementation: */ +#ifdef __clang__ +#pragma clang diagnostic push +#pragma clang diagnostic ignored "-Wignored-attributes" +#endif size_t __weak strlcpy(char *dest, const char *src, size_t size) { size_t ret = strlen(src); @@ -106,3 +110,6 @@ size_t __weak strlcpy(char *dest, const } return ret; } +#ifdef __clang__ +#pragma clang diagnostic pop +#endif

From: Theodore Ts'o tytso@mit.edu

commit 9803387c55f7d2ce69aa64340c5fdc6b3027dbc8 upstream.

Instead of setting s_want_extra_size and then making sure that it is a valid value afterwards, validate the field before we set it. This avoids races and other problems when remounting the file system.

Link: https://lore.kernel.org/r/20191215063020.GA11512@mit.edu Cc: stable@kernel.org Signed-off-by: Theodore Ts'o tytso@mit.edu Reported-and-tested-by: syzbot+4a39a025912b265cacef@syzkaller.appspotmail.com Signed-off-by: Zubin Mithra zsm@chromium.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/ext4/super.c | 127 +++++++++++++++++++++++++++++--------------------------- 1 file changed, 66 insertions(+), 61 deletions(-)

--- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1842,6 +1842,13 @@ static int handle_mount_opt(struct super arg = JBD2_DEFAULT_MAX_COMMIT_AGE; sbi->s_commit_interval = HZ * arg; } else if (token == Opt_debug_want_extra_isize) { + if ((arg & 1) || + (arg < 4) || + (arg > (sbi->s_inode_size - EXT4_GOOD_OLD_INODE_SIZE))) { + ext4_msg(sb, KERN_ERR, + "Invalid want_extra_isize %d", arg); + return -1; + } sbi->s_want_extra_isize = arg; } else if (token == Opt_max_batch_time) { sbi->s_max_batch_time = arg; @@ -3513,40 +3520,6 @@ int ext4_calculate_overhead(struct super return 0; }

-static void ext4_clamp_want_extra_isize(struct super_block *sb) -{ - struct ext4_sb_info *sbi = EXT4_SB(sb); - struct ext4_super_block *es = sbi->s_es; - unsigned def_extra_isize = sizeof(struct ext4_inode) - - EXT4_GOOD_OLD_INODE_SIZE; - - if (sbi->s_inode_size == EXT4_GOOD_OLD_INODE_SIZE) { - sbi->s_want_extra_isize = 0; - return; - } - if (sbi->s_want_extra_isize < 4) { - sbi->s_want_extra_isize = def_extra_isize; - if (ext4_has_feature_extra_isize(sb)) { - if (sbi->s_want_extra_isize < - le16_to_cpu(es->s_want_extra_isize)) - sbi->s_want_extra_isize = - le16_to_cpu(es->s_want_extra_isize); - if (sbi->s_want_extra_isize < - le16_to_cpu(es->s_min_extra_isize)) - sbi->s_want_extra_isize = - le16_to_cpu(es->s_min_extra_isize); - } - } - /* Check if enough inode space is available */ - if ((sbi->s_want_extra_isize > sbi->s_inode_size) || - (EXT4_GOOD_OLD_INODE_SIZE + sbi->s_want_extra_isize > - sbi->s_inode_size)) { - sbi->s_want_extra_isize = def_extra_isize; - ext4_msg(sb, KERN_INFO, - "required extra inode space not available"); - } -} - static void ext4_set_resv_clusters(struct super_block *sb) { ext4_fsblk_t resv_clusters; @@ -3754,6 +3727,65 @@ static int ext4_fill_super(struct super_ */ sbi->s_li_wait_mult = EXT4_DEF_LI_WAIT_MULT;

+ if (le32_to_cpu(es->s_rev_level) == EXT4_GOOD_OLD_REV) { + sbi->s_inode_size = EXT4_GOOD_OLD_INODE_SIZE; + sbi->s_first_ino = EXT4_GOOD_OLD_FIRST_INO; + } else { + sbi->s_inode_size = le16_to_cpu(es->s_inode_size); + sbi->s_first_ino = le32_to_cpu(es->s_first_ino); + if (sbi->s_first_ino < EXT4_GOOD_OLD_FIRST_INO) { + ext4_msg(sb, KERN_ERR, "invalid first ino: %u", + sbi->s_first_ino); + goto failed_mount; + } + if ((sbi->s_inode_size < EXT4_GOOD_OLD_INODE_SIZE) || + (!is_power_of_2(sbi->s_inode_size)) || + (sbi->s_inode_size > blocksize)) { + ext4_msg(sb, KERN_ERR, + "unsupported inode size: %d", + sbi->s_inode_size); + goto failed_mount; + } + /* + * i_atime_extra is the last extra field available for + * [acm]times in struct ext4_inode. Checking for that + * field should suffice to ensure we have extra space + * for all three. + */ + if (sbi->s_inode_size >= offsetof(struct ext4_inode, i_atime_extra) + + sizeof(((struct ext4_inode *)0)->i_atime_extra)) { + sb->s_time_gran = 1; + } else { + sb->s_time_gran = NSEC_PER_SEC; + } + } + if (sbi->s_inode_size > EXT4_GOOD_OLD_INODE_SIZE) { + sbi->s_want_extra_isize = sizeof(struct ext4_inode) - + EXT4_GOOD_OLD_INODE_SIZE; + if (ext4_has_feature_extra_isize(sb)) { + unsigned v, max = (sbi->s_inode_size - + EXT4_GOOD_OLD_INODE_SIZE); + + v = le16_to_cpu(es->s_want_extra_isize); + if (v > max) { + ext4_msg(sb, KERN_ERR, + "bad s_want_extra_isize: %d", v); + goto failed_mount; + } + if (sbi->s_want_extra_isize < v) + sbi->s_want_extra_isize = v; + + v = le16_to_cpu(es->s_min_extra_isize); + if (v > max) { + ext4_msg(sb, KERN_ERR, + "bad s_min_extra_isize: %d", v); + goto failed_mount; + } + if (sbi->s_want_extra_isize < v) + sbi->s_want_extra_isize = v; + } + } + if (sbi->s_es->s_mount_opts[0]) { char *s_mount_opts = kstrndup(sbi->s_es->s_mount_opts, sizeof(sbi->s_es->s_mount_opts), @@ -3955,29 +3987,6 @@ static int ext4_fill_super(struct super_ has_huge_files); sb->s_maxbytes = ext4_max_size(sb->s_blocksize_bits, has_huge_files);

- if (le32_to_cpu(es->s_rev_level) == EXT4_GOOD_OLD_REV) { - sbi->s_inode_size = EXT4_GOOD_OLD_INODE_SIZE; - sbi->s_first_ino = EXT4_GOOD_OLD_FIRST_INO; - } else { - sbi->s_inode_size = le16_to_cpu(es->s_inode_size); - sbi->s_first_ino = le32_to_cpu(es->s_first_ino); - if (sbi->s_first_ino < EXT4_GOOD_OLD_FIRST_INO) { - ext4_msg(sb, KERN_ERR, "invalid first ino: %u", - sbi->s_first_ino); - goto failed_mount; - } - if ((sbi->s_inode_size < EXT4_GOOD_OLD_INODE_SIZE) || - (!is_power_of_2(sbi->s_inode_size)) || - (sbi->s_inode_size > blocksize)) { - ext4_msg(sb, KERN_ERR, - "unsupported inode size: %d", - sbi->s_inode_size); - goto failed_mount; - } - if (sbi->s_inode_size > EXT4_GOOD_OLD_INODE_SIZE) - sb->s_time_gran = 1 << (EXT4_EPOCH_BITS - 2); - } - sbi->s_desc_size = le16_to_cpu(es->s_desc_size); if (ext4_has_feature_64bit(sb)) { if (sbi->s_desc_size < EXT4_MIN_DESC_SIZE_64BIT || @@ -4421,8 +4430,6 @@ no_journal: } else if (ret) goto failed_mount4a;

- ext4_clamp_want_extra_isize(sb); - ext4_set_resv_clusters(sb);

err = ext4_setup_system_zone(sb); @@ -5207,8 +5214,6 @@ static int ext4_remount(struct super_blo goto restore_opts; }

- ext4_clamp_want_extra_isize(sb); - if ((old_opts.s_mount_opt & EXT4_MOUNT_JOURNAL_CHECKSUM) ^ test_opt(sb, JOURNAL_CHECKSUM)) { ext4_msg(sb, KERN_ERR, "changing journal_checksum "

From: Jan Kara jack@suse.cz

commit 5474ca7da6f34fa95e82edc747d5faa19cbdfb5c upstream.

When a filesystem is mounted with jdev mount option, we store the journal device name in an allocated string in superblock. However we fail to ever free that string. Fix it.

Reported-by: syzbot+1c6756baf4b16b94d2a6@syzkaller.appspotmail.com Fixes: c3aa077648e1 ("reiserfs: Properly display mount options in /proc/mounts") CC: stable@vger.kernel.org Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/reiserfs/super.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -629,6 +629,7 @@ static void reiserfs_put_super(struct su reiserfs_write_unlock(s); mutex_destroy(&REISERFS_SB(s)->lock); destroy_workqueue(REISERFS_SB(s)->commit_wq); + kfree(REISERFS_SB(s)->s_jdev); kfree(s->s_fs_info); s->s_fs_info = NULL; } @@ -2243,6 +2244,7 @@ error_unlocked: kfree(qf_names[j]); } #endif + kfree(sbi->s_jdev); kfree(sbi);

s->s_fs_info = NULL;

From: Sean Young sean@mess.org

commit 51d0c99b391f0cac61ad7b827c26f549ee55672c upstream.

If usb_bulk_msg() fails, actual_length can be uninitialized.

Reported-by: syzbot+9d42b7773d2fecd983ab@syzkaller.appspotmail.com Signed-off-by: Sean Young sean@mess.org Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/media/usb/dvb-usb/af9005.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/usb/dvb-usb/af9005.c +++ b/drivers/media/usb/dvb-usb/af9005.c @@ -563,7 +563,7 @@ static int af9005_boot_packet(struct usb u8 *buf, int size) { u16 checksum; - int act_len, i, ret; + int act_len = 0, i, ret;

memset(buf, 0, size); buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff);

From: Hans Verkuil hverkuil-cisco@xs4all.nl

commit de89d0864f66c2a1b75becfdd6bf3793c07ce870 upstream.

Allocate gspca_dev->usb_buf with kzalloc instead of kmalloc to ensure it is property zeroed. This fixes various syzbot errors about uninitialized data.

Syzbot links:

https://syzkaller.appspot.com/bug?extid=32310fc2aea76898d074 https://syzkaller.appspot.com/bug?extid=99706d6390be1ac542a2 https://syzkaller.appspot.com/bug?extid=64437af5c781a7f0e08e

Reported-and-tested-by: syzbot+32310fc2aea76898d074@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+99706d6390be1ac542a2@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+64437af5c781a7f0e08e@syzkaller.appspotmail.com

Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/media/usb/gspca/gspca.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/usb/gspca/gspca.c +++ b/drivers/media/usb/gspca/gspca.c @@ -1473,7 +1473,7 @@ int gspca_dev_probe2(struct usb_interfac pr_err("couldn't kzalloc gspca struct\n"); return -ENOMEM; } - gspca_dev->usb_buf = kmalloc(USB_BUF_SZ, GFP_KERNEL); + gspca_dev->usb_buf = kzalloc(USB_BUF_SZ, GFP_KERNEL); if (!gspca_dev->usb_buf) { pr_err("out of memory\n"); ret = -ENOMEM;

From: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp

commit a8772fad0172aeae339144598b809fd8d4823331 upstream.

syzbot is reporting that there is a race at tomoyo_stat_update() [1]. Although it is acceptable to fail to track exact number of times policy was updated, convert to atomic_t because this is not a hot path.

[1] https://syzkaller.appspot.com/bug?id=a4d7b973972eeed410596e6604580e0133b0fc0...

Reported-by: syzbot syzbot+efea72d4a0a1d03596cd@syzkaller.appspotmail.com Signed-off-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- security/tomoyo/common.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)

--- a/security/tomoyo/common.c +++ b/security/tomoyo/common.c @@ -2254,9 +2254,9 @@ static const char * const tomoyo_memory_ [TOMOYO_MEMORY_QUERY] = "query message:", };

-/* Timestamp counter for last updated. */ -static unsigned int tomoyo_stat_updated[TOMOYO_MAX_POLICY_STAT]; /* Counter for number of updates. */ +static atomic_t tomoyo_stat_updated[TOMOYO_MAX_POLICY_STAT]; +/* Timestamp counter for last updated. */ static time64_t tomoyo_stat_modified[TOMOYO_MAX_POLICY_STAT];

/** @@ -2268,10 +2268,7 @@ static time64_t tomoyo_stat_modified[TOM */ void tomoyo_update_stat(const u8 index) { - /* - * I don't use atomic operations because race condition is not fatal. - */ - tomoyo_stat_updated[index]++; + atomic_inc(&tomoyo_stat_updated[index]); tomoyo_stat_modified[index] = ktime_get_real_seconds(); }

@@ -2291,7 +2288,7 @@ static void tomoyo_read_stat(struct tomo for (i = 0; i < TOMOYO_MAX_POLICY_STAT; i++) { tomoyo_io_printf(head, "Policy %-30s %10u", tomoyo_policy_headers[i], - tomoyo_stat_updated[i]); + atomic_read(&tomoyo_stat_updated[i])); if (tomoyo_stat_modified[i]) { struct tomoyo_time stamp; tomoyo_convert_time(tomoyo_stat_modified[i], &stamp);

From: Dan Carpenter dan.carpenter@oracle.com

commit 11eb85ec42dc8c7a7ec519b90ccf2eeae9409de8 upstream.

Syzbot managed to trigger a use after free "KASAN: use-after-free Write in hci_sock_bind". I have reviewed the code manually and one possibly cause I have found is that we are not holding lock_sock(sk) when we do the hci_dev_put(hdev) in hci_sock_release(). My theory is that the bind and the release are racing against each other which results in this use after free.

Reported-by: syzbot+eba992608adf3d796bcc@syzkaller.appspotmail.com Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Johan Hedberg johan.hedberg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/bluetooth/hci_sock.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -831,6 +831,8 @@ static int hci_sock_release(struct socke if (!sk) return 0;

+ lock_sock(sk); + switch (hci_pi(sk)->channel) { case HCI_CHANNEL_MONITOR: atomic_dec(&monitor_promisc); @@ -878,6 +880,7 @@ static int hci_sock_release(struct socke skb_queue_purge(&sk->sk_receive_queue); skb_queue_purge(&sk->sk_write_queue);

+ release_sock(sk); sock_put(sk); return 0; }

From: Lee Jones lee.jones@linaro.org

A pointer to 'struct si470x_device' is currently used after free:

drivers/media/radio/si470x/radio-si470x-i2c.c:462:25-30: ERROR: reference preceded by free on line 460

Shift the call to free() down past its final use.

NB: Not sending to Mainline, since the problem does not exist there, it was caused by the backport of 2df200ab234a ("media: si470x-i2c: add missed operations in remove") to the stable trees.

Cc: stable@vger.kernel.org # v3.18+ Reported-by: kbuild test robot lkp@intel.com Reported-by: Julia Lawall julia.lawall@lip6.fr Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/media/radio/si470x/radio-si470x-i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/radio/si470x/radio-si470x-i2c.c +++ b/drivers/media/radio/si470x/radio-si470x-i2c.c @@ -483,10 +483,10 @@ static int si470x_i2c_remove(struct i2c_

free_irq(client->irq, radio); video_unregister_device(&radio->videodev); - kfree(radio);

v4l2_ctrl_handler_free(&radio->hdl); v4l2_device_unregister(&radio->v4l2_dev); + kfree(radio); return 0; }

From: Kishon Vijay Abraham I kishon@ti.com

[ Upstream commit 81cc0877840f72210e809bbedd6346d686560fc1 ]

PERST# line in the PCIE connector is driven by the host mode and not EP mode. The gpios property here is used for driving the PERST# line. Remove gpios property from all endpoint device tree nodes.

Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/am571x-idk.dts | 4 ---- arch/arm/boot/dts/am572x-idk-common.dtsi | 4 ---- arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 4 ---- 3 files changed, 12 deletions(-)

diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index bf4163eb6b2ac..510f61d20b6d6 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -93,10 +93,6 @@ gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; };

-&pcie1_ep { - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; -}; - &mmc1 { pinctrl-names = "default", "hs"; pinctrl-0 = <&mmc1_pins_default_no_clk_pu>; diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi index 784639ddf4513..8a7d34c8ae115 100644 --- a/arch/arm/boot/dts/am572x-idk-common.dtsi +++ b/arch/arm/boot/dts/am572x-idk-common.dtsi @@ -71,10 +71,6 @@ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; };

-&pcie1_ep { - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; -}; - &mailbox5 { status = "okay"; mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index d53532b479475..872382bd043f8 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -550,10 +550,6 @@ gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; };

-&pcie1_ep { - gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; -}; - &mcasp3 { #sound-dai-cells = <0>; assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;

From: Dave Gerlach d-gerlach@ti.com

[ Upstream commit 03729cfa0d543bc996bf959e762ec999afc8f3d2 ]

Any user of wkup_m3_ipc calls wkup_m3_ipc_get to get a handle and this checks the value of the static variable m3_ipc_state to see if the wkup_m3 is ready. Currently this is populated during probe before rproc_boot has been called, meaning there is a window of time that wkup_m3_ipc_get can return a valid handle but the wkup_m3 itself is not ready, leading to invalid IPC calls to the wkup_m3 and system instability.

To avoid this, move the population of the m3_ipc_state variable until after rproc_boot has succeeded to guarantee a valid and usable handle is always returned.

Reported-by: Suman Anna s-anna@ti.com Signed-off-by: Dave Gerlach d-gerlach@ti.com Acked-by: Santosh Shilimkar ssantosh@kernel.org Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/ti/wkup_m3_ipc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c index f5cb8c0af09f3..c1fda6acb670a 100644 --- a/drivers/soc/ti/wkup_m3_ipc.c +++ b/drivers/soc/ti/wkup_m3_ipc.c @@ -426,6 +426,8 @@ static void wkup_m3_rproc_boot_thread(struct wkup_m3_ipc *m3_ipc) ret = rproc_boot(m3_ipc->rproc); if (ret) dev_err(dev, "rproc_boot failed\n"); + else + m3_ipc_state = m3_ipc;

do_exit(0); } @@ -512,8 +514,6 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev) goto err_put_rproc; }

- m3_ipc_state = m3_ipc; - return 0;

err_put_rproc:

From: Mathieu Desnoyers mathieu.desnoyers@efficios.com

[ Upstream commit 463f550fb47bede3a5d7d5177f363a6c3b45d50b ]

It has been reported by Google that rseq is not behaving properly with respect to clone when CLONE_VM is used without CLONE_THREAD.

It keeps the prior thread's rseq TLS registered when the TLS of the thread has moved, so the kernel can corrupt the TLS of the parent.

The approach of clearing the per task-struct rseq registration on clone with CLONE_THREAD flag is incomplete. It does not cover the use-case of clone with CLONE_VM set, but without CLONE_THREAD.

Here is the rationale for unregistering rseq on clone with CLONE_VM flag set:

1) CLONE_THREAD requires CLONE_SIGHAND, which requires CLONE_VM to be set. Therefore, just checking for CLONE_VM covers all CLONE_THREAD uses. There is no point in checking for both CLONE_THREAD and CLONE_VM,

2) There is the possibility of an unlikely scenario where CLONE_SETTLS is used without CLONE_VM. In order to be an issue, it would require that the rseq TLS is in a shared memory area.

I do not plan on adding CLONE_SETTLS to the set of clone flags which unregister RSEQ, because it would require that we also unregister RSEQ on set_thread_area(2) and arch_prctl(2) ARCH_SET_FS for completeness. So rather than doing a partial solution, it appears better to let user-space explicitly perform rseq unregistration across clone if needed in scenarios where CLONE_VM is not set.

Signed-off-by: Mathieu Desnoyers mathieu.desnoyers@efficios.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Link: https://lkml.kernel.org/r/20191211161713.4490-3-mathieu.desnoyers@efficios.c... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/sched.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h index 20f5ba262cc0d..0530de9a4efcc 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1843,11 +1843,11 @@ static inline void rseq_migrate(struct task_struct *t)

/* * If parent process has a registered restartable sequences area, the - * child inherits. Only applies when forking a process, not a thread. + * child inherits. Unregister rseq for a clone with CLONE_VM set. */ static inline void rseq_fork(struct task_struct *t, unsigned long clone_flags) { - if (clone_flags & CLONE_THREAD) { + if (clone_flags & CLONE_VM) { t->rseq = NULL; t->rseq_len = 0; t->rseq_sig = 0;

From: Markus Theil markus.theil@tu-ilmenau.de

[ Upstream commit 02a614499600af836137c3fbc4404cd96365fff2 ]

The following warning is triggered every time an unestablished mesh peer gets dumped. Checks if a peer link is established before retrieving the airtime link metric.

[ 9563.022567] WARNING: CPU: 0 PID: 6287 at net/mac80211/mesh_hwmp.c:345 airtime_link_metric_get+0xa2/0xb0 [mac80211] [ 9563.022697] Hardware name: PC Engines apu2/apu2, BIOS v4.10.0.3 [ 9563.022756] RIP: 0010:airtime_link_metric_get+0xa2/0xb0 [mac80211] [ 9563.022838] Call Trace: [ 9563.022897] sta_set_sinfo+0x936/0xa10 [mac80211] [ 9563.022964] ieee80211_dump_station+0x6d/0x90 [mac80211] [ 9563.023062] nl80211_dump_station+0x154/0x2a0 [cfg80211] [ 9563.023120] netlink_dump+0x17b/0x370 [ 9563.023130] netlink_recvmsg+0x2a4/0x480 [ 9563.023140] ____sys_recvmsg+0xa6/0x160 [ 9563.023154] ___sys_recvmsg+0x93/0xe0 [ 9563.023169] __sys_recvmsg+0x7e/0xd0 [ 9563.023210] do_syscall_64+0x4e/0x140 [ 9563.023217] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Markus Theil markus.theil@tu-ilmenau.de Link: https://lore.kernel.org/r/20191203180644.70653-1-markus.theil@tu-ilmenau.de [rewrite commit message] Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/mesh_hwmp.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 6950cd0bf5940..740dc9fa127cd 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -326,6 +326,9 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local, unsigned long fail_avg = ewma_mesh_fail_avg_read(&sta->mesh->fail_avg);

+ if (sta->mesh->plink_state != NL80211_PLINK_ESTAB) + return MAX_METRIC; + /* Try to get rate based on HW/SW RC algorithm. * Rate is returned in units of Kbps, correct this * to comply with airtime calculation units

From: Dmitry Osipenko digetx@gmail.com

[ Upstream commit 89b71b3f02d8ae5a08a1dd6f4a2098b7b868d498 ]

The rt5640->jack is NULL if jack is already disabled at the time of driver's module unloading.

Signed-off-by: Dmitry Osipenko digetx@gmail.com Link: https://lore.kernel.org/r/20200106014707.11378-1-digetx@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5640.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c index 27770143ae8f2..974e1a4491723 100644 --- a/sound/soc/codecs/rt5640.c +++ b/sound/soc/codecs/rt5640.c @@ -2435,6 +2435,13 @@ static void rt5640_disable_jack_detect(struct snd_soc_component *component) { struct rt5640_priv *rt5640 = snd_soc_component_get_drvdata(component);

+ /* + * soc_remove_component() force-disables jack and thus rt5640->jack + * could be NULL at the time of driver's module unloading. + */ + if (!rt5640->jack) + return; + disable_irq(rt5640->irq); rt5640_cancel_work(rt5640);

From: Cambda Zhu cambda@linux.alibaba.com

[ Upstream commit 4fad78ad6422d9bca62135bbed8b6abc4cbb85b8 ]

This patch fixes the calculation of queue when we restore flow director filters after resetting adapter. In ixgbe_fdir_filter_restore(), filter's vf may be zero which makes the queue outside of the rx_ring array.

The calculation is changed to the same as ixgbe_add_ethtool_fdir_entry().

Signed-off-by: Cambda Zhu cambda@linux.alibaba.com Tested-by: Andrew Bowers andrewx.bowers@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 37 ++++++++++++++----- 1 file changed, 27 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 51cd58fbab695..8177276500f5a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -5189,7 +5189,7 @@ static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter) struct ixgbe_hw *hw = &adapter->hw; struct hlist_node *node2; struct ixgbe_fdir_filter *filter; - u64 action; + u8 queue;

spin_lock(&adapter->fdir_perfect_lock);

@@ -5198,17 +5198,34 @@ static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter)

hlist_for_each_entry_safe(filter, node2, &adapter->fdir_filter_list, fdir_node) { - action = filter->action; - if (action != IXGBE_FDIR_DROP_QUEUE && action != 0) - action = - (action >> ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF) - 1; + if (filter->action == IXGBE_FDIR_DROP_QUEUE) { + queue = IXGBE_FDIR_DROP_QUEUE; + } else { + u32 ring = ethtool_get_flow_spec_ring(filter->action); + u8 vf = ethtool_get_flow_spec_ring_vf(filter->action); + + if (!vf && (ring >= adapter->num_rx_queues)) { + e_err(drv, "FDIR restore failed without VF, ring: %u\n", + ring); + continue; + } else if (vf && + ((vf > adapter->num_vfs) || + ring >= adapter->num_rx_queues_per_pool)) { + e_err(drv, "FDIR restore failed with VF, vf: %hhu, ring: %u\n", + vf, ring); + continue; + } + + /* Map the ring onto the absolute queue index */ + if (!vf) + queue = adapter->rx_ring[ring]->reg_idx; + else + queue = ((vf - 1) * + adapter->num_rx_queues_per_pool) + ring; + }

ixgbe_fdir_write_perfect_filter_82599(hw, - &filter->filter, - filter->sw_idx, - (action == IXGBE_FDIR_DROP_QUEUE) ? - IXGBE_FDIR_DROP_QUEUE : - adapter->rx_ring[action]->reg_idx); + &filter->filter, filter->sw_idx, queue); }

spin_unlock(&adapter->fdir_perfect_lock);

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit 1f27dbd8265dbb379926c8f6a4453fe7fe26d7a3 ]

Allow the user to configure the fan to turn on / speed-up at lower thresholds then before (20 degrees Celcius as minimum instead of 40) and likewise also allow the user to delay the fan speeding-up till the temperature hits 90 degrees Celcius (was 70).

Cc: Jason Anderson jasona.594@gmail.com Reported-by: Jason Anderson jasona.594@gmail.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/gpd-pocket-fan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/x86/gpd-pocket-fan.c b/drivers/platform/x86/gpd-pocket-fan.c index 73eb1572b9662..b471b86c28fe8 100644 --- a/drivers/platform/x86/gpd-pocket-fan.c +++ b/drivers/platform/x86/gpd-pocket-fan.c @@ -127,7 +127,7 @@ static int gpd_pocket_fan_probe(struct platform_device *pdev) int i;

for (i = 0; i < ARRAY_SIZE(temp_limits); i++) { - if (temp_limits[i] < 40000 || temp_limits[i] > 70000) { + if (temp_limits[i] < 20000 || temp_limits[i] > 90000) { dev_err(&pdev->dev, "Invalid temp-limit %d (must be between 40000 and 70000)\n", temp_limits[i]); temp_limits[0] = TEMP_LIMIT0_DEFAULT;

From: Arnaud Pouliquen arnaud.pouliquen@st.com

[ Upstream commit ce780a47c3c01e1e179d0792df6b853a913928f1 ]

Change mutex and spinlock management to avoid sleep in atomic issue.

Signed-off-by: Arnaud Pouliquen arnaud.pouliquen@st.com Link: https://lore.kernel.org/r/20200113100400.30472-1-arnaud.pouliquen@st.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sti/uniperif_player.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/sound/soc/sti/uniperif_player.c b/sound/soc/sti/uniperif_player.c index 313dab2857ef9..4b0beb372cd94 100644 --- a/sound/soc/sti/uniperif_player.c +++ b/sound/soc/sti/uniperif_player.c @@ -226,7 +226,6 @@ static void uni_player_set_channel_status(struct uniperif *player, * sampling frequency. If no sample rate is already specified, then * set one. */ - mutex_lock(&player->ctrl_lock); if (runtime) { switch (runtime->rate) { case 22050: @@ -303,7 +302,6 @@ static void uni_player_set_channel_status(struct uniperif *player, player->stream_settings.iec958.status[3 + (n * 4)] << 24; SET_UNIPERIF_CHANNEL_STA_REGN(player, n, status); } - mutex_unlock(&player->ctrl_lock);

/* Update the channel status */ if (player->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0) @@ -365,8 +363,10 @@ static int uni_player_prepare_iec958(struct uniperif *player,

SET_UNIPERIF_CTRL_ZERO_STUFF_HW(player);

+ mutex_lock(&player->ctrl_lock); /* Update the channel status */ uni_player_set_channel_status(player, runtime); + mutex_unlock(&player->ctrl_lock);

/* Clear the user validity user bits */ SET_UNIPERIF_USER_VALIDITY_VALIDITY_LR(player, 0); @@ -598,7 +598,6 @@ static int uni_player_ctl_iec958_put(struct snd_kcontrol *kcontrol, iec958->status[1] = ucontrol->value.iec958.status[1]; iec958->status[2] = ucontrol->value.iec958.status[2]; iec958->status[3] = ucontrol->value.iec958.status[3]; - mutex_unlock(&player->ctrl_lock);

spin_lock_irqsave(&player->irq_lock, flags); if (player->substream && player->substream->runtime) @@ -608,6 +607,8 @@ static int uni_player_ctl_iec958_put(struct snd_kcontrol *kcontrol, uni_player_set_channel_status(player, NULL);

spin_unlock_irqrestore(&player->irq_lock, flags); + mutex_unlock(&player->ctrl_lock); + return 0; }

From: Krzysztof Kozlowski krzk@kernel.org

[ Upstream commit 4f80b70e1953cb846dbdd1ce72cb17333d4c8d11 ]

resource_size_t should be printed with its own size-independent format to fix warnings when compiling on 64-bit platform (e.g. with COMPILE_TEST):

arch/parisc/kernel/drivers.c: In function 'print_parisc_device': arch/parisc/kernel/drivers.c:892:9: warning: format '%p' expects argument of type 'void *', but argument 4 has type 'resource_size_t {aka unsigned int}' [-Wformat=]

Signed-off-by: Krzysztof Kozlowski krzk@kernel.org Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/parisc/kernel/drivers.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index a1a5e4c59e6b2..4d5ad9cb0f692 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -868,8 +868,8 @@ static void print_parisc_device(struct parisc_device *dev) static int count;

print_pa_hwpath(dev, hw_path); - pr_info("%d. %s at 0x%px [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }", - ++count, dev->name, (void*) dev->hpa.start, hw_path, dev->id.hw_type, + pr_info("%d. %s at %pap [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }", + ++count, dev->name, &(dev->hpa.start), hw_path, dev->id.hw_type, dev->id.hversion_rev, dev->id.hversion, dev->id.sversion);

if (dev->num_addrs) {

From: Orr Mazor orr.mazor@tandemg.com

[ Upstream commit 26ec17a1dc5ecdd8d91aba63ead6f8b5ad5dea0d ]

In case a radar event of CAC_FINISHED or RADAR_DETECTED happens during another phy is during CAC we might need to cancel that CAC.

If we got a radar in a channel that another phy is now doing CAC on then the CAC should be canceled there.

If, for example, 2 phys doing CAC on the same channels, or on comptable channels, once on of them will finish his CAC the other might need to cancel his CAC, since it is no longer relevant.

To fix that the commit adds an callback and implement it in mac80211 to end CAC. This commit also adds a call to said callback if after a radar event we see the CAC is no longer relevant

Signed-off-by: Orr Mazor Orr.Mazor@tandemg.com Reviewed-by: Sergey Matyukevich sergey.matyukevich.os@quantenna.com Link: https://lore.kernel.org/r/20191222145449.15792-1-Orr.Mazor@tandemg.com [slightly reformat/reword commit message] Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/cfg80211.h | 5 +++++ net/mac80211/cfg.c | 23 +++++++++++++++++++++++ net/wireless/rdev-ops.h | 10 ++++++++++ net/wireless/reg.c | 23 ++++++++++++++++++++++- net/wireless/trace.h | 5 +++++ 5 files changed, 65 insertions(+), 1 deletion(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 1fa2e72ff7a6a..ae936cd5567e0 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3050,6 +3050,9 @@ struct cfg80211_external_auth_params { * * @start_radar_detection: Start radar detection in the driver. * + * @end_cac: End running CAC, probably because a related CAC + * was finished on another phy. + * * @update_ft_ies: Provide updated Fast BSS Transition information to the * driver. If the SME is in the driver/firmware, this information can be * used in building Authentication and Reassociation Request frames. @@ -3364,6 +3367,8 @@ struct cfg80211_ops { struct net_device *dev, struct cfg80211_chan_def *chandef, u32 cac_time_ms); + void (*end_cac)(struct wiphy *wiphy, + struct net_device *dev); int (*update_ft_ies)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_update_ft_ies_params *ftie); int (*crit_proto_start)(struct wiphy *wiphy, diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index e46944500cfa1..cb7076d9a7698 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2825,6 +2825,28 @@ static int ieee80211_start_radar_detection(struct wiphy *wiphy, return err; }

+static void ieee80211_end_cac(struct wiphy *wiphy, + struct net_device *dev) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; + + mutex_lock(&local->mtx); + list_for_each_entry(sdata, &local->interfaces, list) { + /* it might be waiting for the local->mtx, but then + * by the time it gets it, sdata->wdev.cac_started + * will no longer be true + */ + cancel_delayed_work(&sdata->dfs_cac_timer_work); + + if (sdata->wdev.cac_started) { + ieee80211_vif_release_channel(sdata); + sdata->wdev.cac_started = false; + } + } + mutex_unlock(&local->mtx); +} + static struct cfg80211_beacon_data * cfg80211_beacon_dup(struct cfg80211_beacon_data *beacon) { @@ -3848,6 +3870,7 @@ const struct cfg80211_ops mac80211_config_ops = { #endif .get_channel = ieee80211_cfg_get_channel, .start_radar_detection = ieee80211_start_radar_detection, + .end_cac = ieee80211_end_cac, .channel_switch = ieee80211_channel_switch, .set_qos_map = ieee80211_set_qos_map, .set_ap_chanwidth = ieee80211_set_ap_chanwidth, diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h index 4cff76f33d45f..a8c58aeb9dde9 100644 --- a/net/wireless/rdev-ops.h +++ b/net/wireless/rdev-ops.h @@ -1170,6 +1170,16 @@ rdev_start_radar_detection(struct cfg80211_registered_device *rdev, return ret; }

+static inline void +rdev_end_cac(struct cfg80211_registered_device *rdev, + struct net_device *dev) +{ + trace_rdev_end_cac(&rdev->wiphy, dev); + if (rdev->ops->end_cac) + rdev->ops->end_cac(&rdev->wiphy, dev); + trace_rdev_return_void(&rdev->wiphy); +} + static inline int rdev_set_mcast_rate(struct cfg80211_registered_device *rdev, struct net_device *dev, diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 4c3c8a1c116da..018c60be153a7 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -3840,6 +3840,25 @@ bool regulatory_pre_cac_allowed(struct wiphy *wiphy) return pre_cac_allowed; }

+static void cfg80211_check_and_end_cac(struct cfg80211_registered_device *rdev) +{ + struct wireless_dev *wdev; + /* If we finished CAC or received radar, we should end any + * CAC running on the same channels. + * the check !cfg80211_chandef_dfs_usable contain 2 options: + * either all channels are available - those the CAC_FINISHED + * event has effected another wdev state, or there is a channel + * in unavailable state in wdev chandef - those the RADAR_DETECTED + * event has effected another wdev state. + * In both cases we should end the CAC on the wdev. + */ + list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) { + if (wdev->cac_started && + !cfg80211_chandef_dfs_usable(&rdev->wiphy, &wdev->chandef)) + rdev_end_cac(rdev, wdev->netdev); + } +} + void regulatory_propagate_dfs_state(struct wiphy *wiphy, struct cfg80211_chan_def *chandef, enum nl80211_dfs_state dfs_state, @@ -3866,8 +3885,10 @@ void regulatory_propagate_dfs_state(struct wiphy *wiphy, cfg80211_set_dfs_state(&rdev->wiphy, chandef, dfs_state);

if (event == NL80211_RADAR_DETECTED || - event == NL80211_RADAR_CAC_FINISHED) + event == NL80211_RADAR_CAC_FINISHED) { cfg80211_sched_dfs_chan_update(rdev); + cfg80211_check_and_end_cac(rdev); + }

nl80211_radar_notify(rdev, chandef, event, NULL, GFP_KERNEL); } diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 7c73510b161f3..54b0bb344cf93 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -607,6 +607,11 @@ DEFINE_EVENT(wiphy_netdev_evt, rdev_flush_pmksa, TP_ARGS(wiphy, netdev) );

+DEFINE_EVENT(wiphy_netdev_evt, rdev_end_cac, + TP_PROTO(struct wiphy *wiphy, struct net_device *netdev), + TP_ARGS(wiphy, netdev) +); + DECLARE_EVENT_CLASS(station_add_change, TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, u8 *mac, struct station_parameters *params),

From: Arnd Bergmann arnd@arndb.de

[ Upstream commit e16119655c9e6c4aa5767cd971baa9c491f41b13 ]

After the introduction of CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3, the wext code produces a bogus warning:

In function 'iw_handler_get_iwstats', inlined from 'ioctl_standard_call' at net/wireless/wext-core.c:1015:9, inlined from 'wireless_process_ioctl' at net/wireless/wext-core.c:935:10, inlined from 'wext_ioctl_dispatch.part.8' at net/wireless/wext-core.c:986:8, inlined from 'wext_handle_ioctl': net/wireless/wext-core.c:671:3: error: argument 1 null where non-null expected [-Werror=nonnull] memcpy(extra, stats, sizeof(struct iw_statistics)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from arch/x86/include/asm/string.h:5, net/wireless/wext-core.c: In function 'wext_handle_ioctl': arch/x86/include/asm/string_64.h:14:14: note: in a call to function 'memcpy' declared here

The problem is that ioctl_standard_call() sometimes calls the handler with a NULL argument that would cause a problem for iw_handler_get_iwstats. However, iw_handler_get_iwstats never actually gets called that way.

Marking that function as noinline avoids the warning and leads to slightly smaller object code as well.

Signed-off-by: Arnd Bergmann arnd@arndb.de Link: https://lore.kernel.org/r/20200107200741.3588770-1-arnd@arndb.de Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/wireless/wext-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/wireless/wext-core.c b/net/wireless/wext-core.c index 5e677dac2a0ce..69102fda9ebd4 100644 --- a/net/wireless/wext-core.c +++ b/net/wireless/wext-core.c @@ -657,7 +657,8 @@ struct iw_statistics *get_wireless_stats(struct net_device *dev) return NULL; }

-static int iw_handler_get_iwstats(struct net_device * dev, +/* noinline to avoid a bogus warning with -O3 */ +static noinline int iw_handler_get_iwstats(struct net_device * dev, struct iw_request_info * info, union iwreq_data * wrqu, char * extra)

From: Florian Fainelli f.fainelli@gmail.com

[ Upstream commit 8f1880cbe8d0d49ebb7e9ae409b3b96676e5aa97 ]

With the implementation of the system reset controller we lost a setting that is currently applied by the bootloader and which configures the IMP port for 2Gb/sec, the default is 1Gb/sec. This is needed given the number of ports and applications we expect to run so bring back that setting.

Fixes: 01b0ac07589e ("net: dsa: bcm_sf2: Add support for optional reset controller line") Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/bcm_sf2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 02a4187d81bd0..c936090076706 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -72,7 +72,7 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)

/* Force link status for IMP port */ reg = core_readl(priv, offset); - reg |= (MII_SW_OR | LINK_STS); + reg |= (MII_SW_OR | LINK_STS | GMII_SPEED_UP_2G); core_writel(priv, reg, offset);

/* Enable Broadcast, Multicast, Unicast forwarding to IMP port */

From: Ilie Halip ilie.halip@gmail.com

[ Upstream commit 95f4d9cced96afa9c69b3da8e79e96102c84fc60 ]

Temporary files used in the VDSO build process linger on even after make mrproper: vdso-dummy.o.tmp, vdso.so.dbg.tmp.

Delete them once they're no longer needed.

Signed-off-by: Ilie Halip ilie.halip@gmail.com Signed-off-by: Paul Walmsley paul.walmsley@sifive.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/kernel/vdso/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile index eed1c137f6183..87f71a6cd3ef8 100644 --- a/arch/riscv/kernel/vdso/Makefile +++ b/arch/riscv/kernel/vdso/Makefile @@ -55,7 +55,8 @@ quiet_cmd_vdsold = VDSOLD $@ cmd_vdsold = $(CC) $(KBUILD_CFLAGS) $(call cc-option, -no-pie) -nostdlib -nostartfiles $(SYSCFLAGS_$(@F)) \ -Wl,-T,$(filter-out FORCE,$^) -o $@.tmp && \ $(CROSS_COMPILE)objcopy \ - $(patsubst %, -G __vdso_%, $(vdso-syms)) $@.tmp $@ + $(patsubst %, -G __vdso_%, $(vdso-syms)) $@.tmp $@ && \ + rm $@.tmp

# install commands for the unstripped file quiet_cmd_vdso_install = INSTALL $@

From: Haim Dreyfuss haim.dreyfuss@intel.com

[ Upstream commit 2763bba6328c53c455d8f7f5302b80030551c31b ]

When receiving a new MCC driver get all the data about the new country code and its regulatory information. Mistakenly, we ignored the cap field, which includes global regulatory information which should be applies to every channel. Fix it.

Signed-off-by: Haim Dreyfuss haim.dreyfuss@intel.com Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../wireless/intel/iwlwifi/iwl-nvm-parse.c | 48 ++++++++++++++++++- .../wireless/intel/iwlwifi/iwl-nvm-parse.h | 6 +-- .../net/wireless/intel/iwlwifi/mvm/mac80211.c | 3 +- 3 files changed, 51 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c index b850cca9853c8..a6e64787a3454 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c @@ -217,6 +217,34 @@ enum iwl_nvm_channel_flags { NVM_CHANNEL_DC_HIGH = BIT(12), };

+/** + * enum iwl_reg_capa_flags - global flags applied for the whole regulatory + * domain. + * @REG_CAPA_BF_CCD_LOW_BAND: Beam-forming or Cyclic Delay Diversity in the + * 2.4Ghz band is allowed. + * @REG_CAPA_BF_CCD_HIGH_BAND: Beam-forming or Cyclic Delay Diversity in the + * 5Ghz band is allowed. + * @REG_CAPA_160MHZ_ALLOWED: 11ac channel with a width of 160Mhz is allowed + * for this regulatory domain (valid only in 5Ghz). + * @REG_CAPA_80MHZ_ALLOWED: 11ac channel with a width of 80Mhz is allowed + * for this regulatory domain (valid only in 5Ghz). + * @REG_CAPA_MCS_8_ALLOWED: 11ac with MCS 8 is allowed. + * @REG_CAPA_MCS_9_ALLOWED: 11ac with MCS 9 is allowed. + * @REG_CAPA_40MHZ_FORBIDDEN: 11n channel with a width of 40Mhz is forbidden + * for this regulatory domain (valid only in 5Ghz). + * @REG_CAPA_DC_HIGH_ENABLED: DC HIGH allowed. + */ +enum iwl_reg_capa_flags { + REG_CAPA_BF_CCD_LOW_BAND = BIT(0), + REG_CAPA_BF_CCD_HIGH_BAND = BIT(1), + REG_CAPA_160MHZ_ALLOWED = BIT(2), + REG_CAPA_80MHZ_ALLOWED = BIT(3), + REG_CAPA_MCS_8_ALLOWED = BIT(4), + REG_CAPA_MCS_9_ALLOWED = BIT(5), + REG_CAPA_40MHZ_FORBIDDEN = BIT(7), + REG_CAPA_DC_HIGH_ENABLED = BIT(9), +}; + static inline void iwl_nvm_print_channel_flags(struct device *dev, u32 level, int chan, u16 flags) { @@ -923,6 +951,7 @@ IWL_EXPORT_SYMBOL(iwl_parse_nvm_data);

static u32 iwl_nvm_get_regdom_bw_flags(const u8 *nvm_chan, int ch_idx, u16 nvm_flags, + u16 cap_flags, const struct iwl_cfg *cfg) { u32 flags = NL80211_RRF_NO_HT40; @@ -966,6 +995,20 @@ static u32 iwl_nvm_get_regdom_bw_flags(const u8 *nvm_chan, (flags & NL80211_RRF_NO_IR)) flags |= NL80211_RRF_GO_CONCURRENT;

+ /* + * cap_flags is per regulatory domain so apply it for every channel + */ + if (ch_idx >= NUM_2GHZ_CHANNELS) { + if (cap_flags & REG_CAPA_40MHZ_FORBIDDEN) + flags |= NL80211_RRF_NO_HT40; + + if (!(cap_flags & REG_CAPA_80MHZ_ALLOWED)) + flags |= NL80211_RRF_NO_80MHZ; + + if (!(cap_flags & REG_CAPA_160MHZ_ALLOWED)) + flags |= NL80211_RRF_NO_160MHZ; + } + return flags; }

@@ -977,7 +1020,7 @@ struct regdb_ptrs { struct ieee80211_regdomain * iwl_parse_nvm_mcc_info(struct device *dev, const struct iwl_cfg *cfg, int num_of_ch, __le32 *channels, u16 fw_mcc, - u16 geo_info) + u16 geo_info, u16 cap) { int ch_idx; u16 ch_flags; @@ -1038,7 +1081,8 @@ iwl_parse_nvm_mcc_info(struct device *dev, const struct iwl_cfg *cfg, }

reg_rule_flags = iwl_nvm_get_regdom_bw_flags(nvm_chan, ch_idx, - ch_flags, cfg); + ch_flags, cap, + cfg);

/* we can't continue the same rule */ if (ch_idx == 0 || prev_reg_rule_flags != reg_rule_flags || diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.h b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.h index 234d1009a9de4..a9bdd4aa01c7e 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.h @@ -7,7 +7,7 @@ * * Copyright(c) 2008 - 2015 Intel Corporation. All rights reserved. * Copyright(c) 2016 - 2017 Intel Deutschland GmbH - * Copyright(c) 2018 Intel Corporation + * Copyright(c) 2018 - 2019 Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -34,7 +34,7 @@ * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2016 - 2017 Intel Deutschland GmbH - * Copyright(c) 2018 Intel Corporation + * Copyright(c) 2018 - 2019 Intel Corporation * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -108,7 +108,7 @@ iwl_parse_nvm_data(struct iwl_trans *trans, const struct iwl_cfg *cfg, struct ieee80211_regdomain * iwl_parse_nvm_mcc_info(struct device *dev, const struct iwl_cfg *cfg, int num_of_ch, __le32 *channels, u16 fw_mcc, - u16 geo_info); + u16 geo_info, u16 cap);

/** * struct iwl_nvm_section - describes an NVM section in memory. diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 476c44db0e64b..58653598db146 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -317,7 +317,8 @@ struct ieee80211_regdomain *iwl_mvm_get_regdomain(struct wiphy *wiphy, __le32_to_cpu(resp->n_channels), resp->channels, __le16_to_cpu(resp->mcc), - __le16_to_cpu(resp->geo_info)); + __le16_to_cpu(resp->geo_info), + __le16_to_cpu(resp->cap)); /* Store the return source id */ src_id = resp->source_id; kfree(resp);

From: Matwey V. Kornilov matwey@sai.msu.ru

[ Upstream commit 5abd45ea0fc3060f7805e131753fdcbafd6c6618 ]

BeagleBone Black series is equipped with 512MB RAM whereas only 256MB is included from am335x-bone-common.dtsi

This leads to an issue with unusual setups when devicetree is loaded by GRUB2 directly.

Signed-off-by: Matwey V. Kornilov matwey@sai.msu.ru Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/am335x-boneblack-common.dtsi | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi index 21bc1173fa6b9..cb4267edde63d 100644 --- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi +++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi @@ -131,6 +131,11 @@ };

/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + clk_mcasp0_fixed: clk_mcasp0_fixed { #clock-cells = <0>; compatible = "fixed-clock";

From: Nicolas Dichtel nicolas.dichtel@6wind.com

[ Upstream commit f042365dbffea98fb8148c98c700402e8d099f02 ]

With an ebpf program that redirects packets through a xfrm interface, packets are dropped because no dst is attached to skb.

This could also be reproduced with an AF_PACKET socket, with the following python script (xfrm1 is a xfrm interface):

import socket send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0) # scapy # p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request') # raw(p) req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00' send_s.sendto(req, ('xfrm1', 0x800, 0, 0))

It was also not possible to send an ip packet through an AF_PACKET socket because a LL header was expected. Let's remove those LL header constraints.

Signed-off-by: Nicolas Dichtel nicolas.dichtel@6wind.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/xfrm/xfrm_interface.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-)

diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c index 4ee512622e93d..20565a4742112 100644 --- a/net/xfrm/xfrm_interface.c +++ b/net/xfrm/xfrm_interface.c @@ -268,9 +268,6 @@ xfrmi_xmit2(struct sk_buff *skb, struct net_device *dev, struct flowi *fl) int err = -1; int mtu;

- if (!dst) - goto tx_err_link_failure; - dst_hold(dst); dst = xfrm_lookup_with_ifid(xi->net, dst, fl, NULL, 0, xi->p.if_id); if (IS_ERR(dst)) { @@ -343,6 +340,7 @@ static netdev_tx_t xfrmi_xmit(struct sk_buff *skb, struct net_device *dev) { struct xfrm_if *xi = netdev_priv(dev); struct net_device_stats *stats = &xi->dev->stats; + struct dst_entry *dst = skb_dst(skb); struct flowi fl; int ret;

@@ -352,10 +350,33 @@ static netdev_tx_t xfrmi_xmit(struct sk_buff *skb, struct net_device *dev) case htons(ETH_P_IPV6): xfrm_decode_session(skb, &fl, AF_INET6); memset(IP6CB(skb), 0, sizeof(*IP6CB(skb))); + if (!dst) { + fl.u.ip6.flowi6_oif = dev->ifindex; + fl.u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC; + dst = ip6_route_output(dev_net(dev), NULL, &fl.u.ip6); + if (dst->error) { + dst_release(dst); + stats->tx_carrier_errors++; + goto tx_err; + } + skb_dst_set(skb, dst); + } break; case htons(ETH_P_IP): xfrm_decode_session(skb, &fl, AF_INET); memset(IPCB(skb), 0, sizeof(*IPCB(skb))); + if (!dst) { + struct rtable *rt; + + fl.u.ip4.flowi4_oif = dev->ifindex; + fl.u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC; + rt = __ip_route_output_key(dev_net(dev), &fl.u.ip4); + if (IS_ERR(rt)) { + stats->tx_carrier_errors++; + goto tx_err; + } + skb_dst_set(skb, &rt->dst); + } break; default: goto tx_err; @@ -566,12 +587,9 @@ static void xfrmi_dev_setup(struct net_device *dev) { dev->netdev_ops = &xfrmi_netdev_ops; dev->type = ARPHRD_NONE; - dev->hard_header_len = ETH_HLEN; - dev->min_header_len = ETH_HLEN; dev->mtu = ETH_DATA_LEN; dev->min_mtu = ETH_MIN_MTU; - dev->max_mtu = ETH_DATA_LEN; - dev->addr_len = ETH_ALEN; + dev->max_mtu = IP_MAX_MTU; dev->flags = IFF_NOARP; dev->needs_free_netdev = true; dev->priv_destructor = xfrmi_dev_free;

From: Hannes Reinecke hare@suse.de

[ Upstream commit 0e2209629fec427ba75a6351486153a9feddd36b ]

When a link is going down the driver will be calling fnic_cleanup_io(), which will traverse all commands and calling 'done' for each found command. While the traversal is handled under the host_lock, calling 'done' happens after the host_lock is being dropped.

As fnic_queuecommand_lck() is being called with the host_lock held, it might well be that it will pick the command being selected for abortion from the above routine and enqueue it for sending, but then 'done' is being called on that very command from the above routine.

Which of course confuses the hell out of the scsi midlayer.

So fix this by not queueing commands when fnic_cleanup_io is active.

Link: https://lore.kernel.org/r/20200116102053.62755-1-hare@suse.de Signed-off-by: Hannes Reinecke hare@suse.de Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/fnic/fnic_scsi.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c index 8cbd3c9f0b4cb..73ffc16ec0225 100644 --- a/drivers/scsi/fnic/fnic_scsi.c +++ b/drivers/scsi/fnic/fnic_scsi.c @@ -446,6 +446,9 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_ if (unlikely(fnic_chk_state_flags_locked(fnic, FNIC_FLAGS_IO_BLOCKED))) return SCSI_MLQUEUE_HOST_BUSY;

+ if (unlikely(fnic_chk_state_flags_locked(fnic, FNIC_FLAGS_FWRESET))) + return SCSI_MLQUEUE_HOST_BUSY; + rport = starget_to_rport(scsi_target(sc->device)); if (!rport) { FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,

From: Vincenzo Frascino vincenzo.frascino@arm.com

[ Upstream commit 9e0caab8e0f96f0af7d1dd388e62f44184a75372 ]

The optee driver uses specific page table types to verify if a memory region is normal. These types are not defined in nommu systems. Trying to compile the driver in these systems results in a build error:

linux/drivers/tee/optee/call.c: In function ‘is_normal_memory’: linux/drivers/tee/optee/call.c:533:26: error: ‘L_PTE_MT_MASK’ undeclared (first use in this function); did you mean ‘PREEMPT_MASK’? return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC; ^~~~~~~~~~~~~ PREEMPT_MASK linux/drivers/tee/optee/call.c:533:26: note: each undeclared identifier is reported only once for each function it appears in linux/drivers/tee/optee/call.c:533:44: error: ‘L_PTE_MT_WRITEALLOC’ undeclared (first use in this function) return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC; ^~~~~~~~~~~~~~~~~~~

Make the optee driver depend on MMU to fix the compilation issue.

Signed-off-by: Vincenzo Frascino vincenzo.frascino@arm.com [jw: update commit title] Signed-off-by: Jens Wiklander jens.wiklander@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tee/optee/Kconfig | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/tee/optee/Kconfig b/drivers/tee/optee/Kconfig index 3c59e19029bef..3c1ec4e9ed29a 100644 --- a/drivers/tee/optee/Kconfig +++ b/drivers/tee/optee/Kconfig @@ -2,6 +2,7 @@ config OPTEE tristate "OP-TEE" depends on HAVE_ARM_SMCCC + depends on MMU help This implements the OP-TEE Trusted Execution Environment (TEE) driver.

From: Michael Ellerman mpe@ellerman.id.au

[ Upstream commit 78f7a7566f5eb59321e99b55a6fdb16ea05b37d1 ]

The driver for Cisco Aironet 4500 and 4800 series cards (airo.c), implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl().

The ioctl handler copies an aironet_ioctl struct from userspace, which includes a command. Some of the commands are handled in readrids(), where the user controlled command is converted into a driver-internal value called "ridcode".

There are two command values, AIROGWEPKTMP and AIROGWEPKNV, which correspond to ridcode values of RID_WEP_TEMP and RID_WEP_PERM respectively. These commands both have checks that the user has CAP_NET_ADMIN, with the comment that "Only super-user can read WEP keys", otherwise they return -EPERM.

However there is another command value, AIRORRID, that lets the user specify the ridcode value directly, with no other checks. This means the user can bypass the CAP_NET_ADMIN check on AIROGWEPKTMP and AIROGWEPKNV.

Fix it by moving the CAP_NET_ADMIN check out of the command handling and instead do it later based on the ridcode. That way regardless of whether the ridcode is set via AIROGWEPKTMP or AIROGWEPKNV, or passed in using AIRORID, we always do the CAP_NET_ADMIN check.

Found by Ilja by code inspection, not tested as I don't have the required hardware.

Reported-by: Ilja Van Sprundel ivansprundel@ioactive.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/cisco/airo.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/cisco/airo.c b/drivers/net/wireless/cisco/airo.c index 9344cf17d6b11..c3fe9bfff8122 100644 --- a/drivers/net/wireless/cisco/airo.c +++ b/drivers/net/wireless/cisco/airo.c @@ -7786,16 +7786,8 @@ static int readrids(struct net_device *dev, aironet_ioctl *comp) { case AIROGVLIST: ridcode = RID_APLIST; break; case AIROGDRVNAM: ridcode = RID_DRVNAME; break; case AIROGEHTENC: ridcode = RID_ETHERENCAP; break; - case AIROGWEPKTMP: ridcode = RID_WEP_TEMP; - /* Only super-user can read WEP keys */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - break; - case AIROGWEPKNV: ridcode = RID_WEP_PERM; - /* Only super-user can read WEP keys */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - break; + case AIROGWEPKTMP: ridcode = RID_WEP_TEMP; break; + case AIROGWEPKNV: ridcode = RID_WEP_PERM; break; case AIROGSTAT: ridcode = RID_STATUS; break; case AIROGSTATSD32: ridcode = RID_STATSDELTA; break; case AIROGSTATSC32: ridcode = RID_STATS; break; @@ -7809,6 +7801,12 @@ static int readrids(struct net_device *dev, aironet_ioctl *comp) { return -EINVAL; }

+ if (ridcode == RID_WEP_TEMP || ridcode == RID_WEP_PERM) { + /* Only super-user can read WEP keys */ + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + } + if ((iobuf = kzalloc(RIDSIZE, GFP_KERNEL)) == NULL) return -ENOMEM;

From: Raag Jadav raagjadav@gmail.com

[ Upstream commit b0b03951544534d6d9ad4aa2787eefec988fff20 ]

Set d0 and d1 pin directions for spi0 and spi1 as per their pinmux.

Signed-off-by: Raag Jadav raagjadav@gmail.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/am43x-epos-evm.dts | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 12735cf9674bb..b6950eee550b2 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -839,6 +839,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi0_pins_default>; pinctrl-1 = <&spi0_pins_sleep>; + ti,pindir-d0-out-d1-in = <1>; };

&spi1 { @@ -846,6 +847,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi1_pins_default>; pinctrl-1 = <&spi1_pins_sleep>; + ti,pindir-d0-out-d1-in = <1>; };

&usb2_phy1 {

From: Madalin Bucur madalin.bucur@oss.nxp.com

[ Upstream commit 73d527aef68f7644e59f22ce7f9ac75e7b533aea ]

Add fsl,erratum-a011043 to internal MDIO buses. Software may get false read error when reading internal PCS registers through MDIO. As a workaround, all internal MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.

Signed-off-by: Madalin Bucur madalin.bucur@oss.nxp.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi | 1 + arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi | 1 + 18 files changed, 18 insertions(+)

diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi index e1a961f05dcd5..baa0c503e741b 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi @@ -63,6 +63,7 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe1000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy0: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi index c288f3c6c6378..93095600e8086 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi @@ -60,6 +60,7 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xf1000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy6: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi index 94f3e71750124..ff4bd38f06459 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi @@ -63,6 +63,7 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe3000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy1: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi index 94a76982d214b..1fa38ed6f59e2 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi @@ -60,6 +60,7 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xf3000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy7: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi index b5ff5f71c6b8b..a8cc9780c0c42 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi @@ -59,6 +59,7 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe1000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy0: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi index ee44182c63485..8b8bd70c93823 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi @@ -59,6 +59,7 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe3000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy1: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi index f05f0d775039b..619c880b54d8d 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi @@ -59,6 +59,7 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe5000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy2: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi index a9114ec510759..d7ebb73a400d0 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi @@ -59,6 +59,7 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe7000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy3: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi index 44dd00ac7367f..b151d696a0699 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi @@ -59,6 +59,7 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe9000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy4: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi index 5b1b84b58602f..adc0ae0013a3c 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi @@ -59,6 +59,7 @@ fman@400000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xeb000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy5: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi index 0e1daaef9e74b..435047e0e250e 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi @@ -60,6 +60,7 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xf1000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy14: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi index 68c5ef779266a..c098657cca0a7 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi @@ -60,6 +60,7 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xf3000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy15: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi index 605363cc1117f..9d06824815f34 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi @@ -59,6 +59,7 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe1000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy8: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi index 1955dfa136348..70e947730c4ba 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi @@ -59,6 +59,7 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe3000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy9: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi index 2c1476454ee01..ad96e65295959 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi @@ -59,6 +59,7 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe5000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy10: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi index b8b541ff5fb03..034bc4b71f7a5 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi @@ -59,6 +59,7 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe7000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy11: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi index 4b2cfddd1b155..93ca23d82b39b 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi @@ -59,6 +59,7 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe9000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy12: ethernet-phy@0 { reg = <0x0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi index 0a52ddf7cc171..23b3117a2fd2a 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi @@ -59,6 +59,7 @@ fman@500000 { #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xeb000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */

pcsphy13: ethernet-phy@0 { reg = <0x0>;

From: Madalin Bucur madalin.bucur@oss.nxp.com

[ Upstream commit 457bfc0a4bf531487ecc3cf82ec728a5e114fb1e ]

As the only 10G PHY interface type defined at the moment the code was developed was XGMII, although the PHY interface mode used was not XGMII, XGMII was used in the code to denote 10G. This patch renames the 10G interface mode to remove the ambiguity.

Signed-off-by: Madalin Bucur madalin.bucur@oss.nxp.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/fman/fman_memac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fman/fman_memac.c b/drivers/net/ethernet/freescale/fman/fman_memac.c index 41c6fa200e746..e1901874c19f0 100644 --- a/drivers/net/ethernet/freescale/fman/fman_memac.c +++ b/drivers/net/ethernet/freescale/fman/fman_memac.c @@ -110,7 +110,7 @@ do { \ /* Interface Mode Register (IF_MODE) */

#define IF_MODE_MASK 0x00000003 /* 30-31 Mask on i/f mode bits */ -#define IF_MODE_XGMII 0x00000000 /* 30-31 XGMII (10G) interface */ +#define IF_MODE_10G 0x00000000 /* 30-31 10G interface */ #define IF_MODE_GMII 0x00000002 /* 30-31 GMII (1G) interface */ #define IF_MODE_RGMII 0x00000004 #define IF_MODE_RGMII_AUTO 0x00008000 @@ -440,7 +440,7 @@ static int init(struct memac_regs __iomem *regs, struct memac_cfg *cfg, tmp = 0; switch (phy_if) { case PHY_INTERFACE_MODE_XGMII: - tmp |= IF_MODE_XGMII; + tmp |= IF_MODE_10G; break; default: tmp |= IF_MODE_GMII;

From: Vasily Averin vvs@virtuozzo.com

[ Upstream commit 66018a102f7756cf72db4d2704e1b93969d9d332 ]

if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin vvs@virtuozzo.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/chelsio/cxgb4/l2t.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/l2t.c b/drivers/net/ethernet/chelsio/cxgb4/l2t.c index 301c4df8a5664..986277744611c 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/l2t.c +++ b/drivers/net/ethernet/chelsio/cxgb4/l2t.c @@ -683,8 +683,7 @@ static void *l2t_seq_start(struct seq_file *seq, loff_t *pos) static void *l2t_seq_next(struct seq_file *seq, void *v, loff_t *pos) { v = l2t_get_idx(seq, *pos); - if (v) - ++*pos; + ++(*pos); return v; }