If all the subrequests in an unbuffered write stream fail, the subrequest collector doesn't update the stream->transferred value and it retains its initial LONG_MAX value. Unfortunately, if all active streams fail, then we take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set in wreq->transferred - which is then returned from ->write_iter().
LONG_MAX was chosen as the initial value so that all the streams can be quickly assessed by taking the smallest value of all stream->transferred - but this only works if we've set any of them.
Fix this by adding a flag to indicate whether the value in stream->transferred is valid and checking that when we integrate the values. stream->transferred can then be initialised to zero.
This was found by running the generic/750 xfstest against cifs with cache=none. It splices data to the target file. Once (if) it has used up all the available scratch space, the writes start failing with ENOSPC. This causes ->write_iter() to fail. However, it was returning wreq->transferred, i.e. LONG_MAX, rather than an error (because it thought the amount transferred was non-zero) and iter_file_splice_write() would then try to clean up that amount of pipe bufferage - leading to an oops when it overran. The kernel log showed:
CIFS: VFS: Send error in write = -28
followed by:
BUG: kernel NULL pointer dereference, address: 0000000000000008
with:
RIP: 0010:iter_file_splice_write+0x3a4/0x520 do_splice+0x197/0x4e0
or:
RIP: 0010:pipe_buf_release (include/linux/pipe_fs_i.h:282) iter_file_splice_write (fs/splice.c:755)
Also put a warning check into splice to announce if ->write_iter() returned that it had written more than it was asked to.
Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Reported-by: Xiaoli Feng fengxiaoli0714@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220445 Signed-off-by: David Howells dhowells@redhat.com cc: Paulo Alcantara pc@manguebit.org cc: Steve French sfrench@samba.org cc: Shyam Prasad N sprasad@microsoft.com cc: netfs@lists.linux.dev cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: stable@vger.kernel.org --- fs/netfs/read_collect.c | 4 +++- fs/netfs/write_collect.c | 10 ++++++++-- fs/netfs/write_issue.c | 4 ++-- fs/splice.c | 3 +++ include/linux/netfs.h | 1 + 5 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/fs/netfs/read_collect.c b/fs/netfs/read_collect.c index 3e804da1e1eb..a95e7aadafd0 100644 --- a/fs/netfs/read_collect.c +++ b/fs/netfs/read_collect.c @@ -281,8 +281,10 @@ static void netfs_collect_read_results(struct netfs_io_request *rreq) } else if (test_bit(NETFS_RREQ_SHORT_TRANSFER, &rreq->flags)) { notes |= MADE_PROGRESS; } else { - if (!stream->failed) + if (!stream->failed) { stream->transferred += transferred; + stream->transferred_valid = true; + } if (front->transferred < front->len) set_bit(NETFS_RREQ_SHORT_TRANSFER, &rreq->flags); notes |= MADE_PROGRESS; diff --git a/fs/netfs/write_collect.c b/fs/netfs/write_collect.c index 0f3a36852a4d..cbf3d9194c7b 100644 --- a/fs/netfs/write_collect.c +++ b/fs/netfs/write_collect.c @@ -254,6 +254,7 @@ static void netfs_collect_write_results(struct netfs_io_request *wreq) if (front->start + front->transferred > stream->collected_to) { stream->collected_to = front->start + front->transferred; stream->transferred = stream->collected_to - wreq->start; + stream->transferred_valid = true; notes |= MADE_PROGRESS; } if (test_bit(NETFS_SREQ_FAILED, &front->flags)) { @@ -356,6 +357,7 @@ bool netfs_write_collection(struct netfs_io_request *wreq) { struct netfs_inode *ictx = netfs_inode(wreq->inode); size_t transferred; + bool transferred_valid = false; int s;
_enter("R=%x", wreq->debug_id); @@ -376,12 +378,16 @@ bool netfs_write_collection(struct netfs_io_request *wreq) continue; if (!list_empty(&stream->subrequests)) return false; - if (stream->transferred < transferred) + if (stream->transferred_valid && + stream->transferred < transferred) { transferred = stream->transferred; + transferred_valid = true; + } }
/* Okay, declare that all I/O is complete. */ - wreq->transferred = transferred; + if (transferred_valid) + wreq->transferred = transferred; trace_netfs_rreq(wreq, netfs_rreq_trace_write_done);
if (wreq->io_streams[1].active && diff --git a/fs/netfs/write_issue.c b/fs/netfs/write_issue.c index 50bee2c4130d..0584cba1a043 100644 --- a/fs/netfs/write_issue.c +++ b/fs/netfs/write_issue.c @@ -118,12 +118,12 @@ struct netfs_io_request *netfs_create_write_req(struct address_space *mapping, wreq->io_streams[0].prepare_write = ictx->ops->prepare_write; wreq->io_streams[0].issue_write = ictx->ops->issue_write; wreq->io_streams[0].collected_to = start; - wreq->io_streams[0].transferred = LONG_MAX; + wreq->io_streams[0].transferred = 0;
wreq->io_streams[1].stream_nr = 1; wreq->io_streams[1].source = NETFS_WRITE_TO_CACHE; wreq->io_streams[1].collected_to = start; - wreq->io_streams[1].transferred = LONG_MAX; + wreq->io_streams[1].transferred = 0; if (fscache_resources_valid(&wreq->cache_resources)) { wreq->io_streams[1].avail = true; wreq->io_streams[1].active = true; diff --git a/fs/splice.c b/fs/splice.c index 4d6df083e0c0..f5094b6d00a0 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -739,6 +739,9 @@ iter_file_splice_write(struct pipe_inode_info *pipe, struct file *out, sd.pos = kiocb.ki_pos; if (ret <= 0) break; + WARN_ONCE(ret > sd.total_len - left, + "Splice Exceeded! ret=%zd tot=%zu left=%zu\n", + ret, sd.total_len, left);
sd.num_spliced += ret; sd.total_len -= ret; diff --git a/include/linux/netfs.h b/include/linux/netfs.h index 185bd8196503..98c96d649bf9 100644 --- a/include/linux/netfs.h +++ b/include/linux/netfs.h @@ -150,6 +150,7 @@ struct netfs_io_stream { bool active; /* T if stream is active */ bool need_retry; /* T if this stream needs retrying */ bool failed; /* T if this stream failed */ + bool transferred_valid; /* T is ->transferred is valid */ };
/*
On Thu, 14 Aug 2025 22:45:50 +0100, David Howells wrote:
If all the subrequests in an unbuffered write stream fail, the subrequest collector doesn't update the stream->transferred value and it retains its initial LONG_MAX value. Unfortunately, if all active streams fail, then we take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set in wreq->transferred - which is then returned from ->write_iter().
LONG_MAX was chosen as the initial value so that all the streams can be quickly assessed by taking the smallest value of all stream->transferred - but this only works if we've set any of them.
[...]
Applied to the vfs.fixes branch of the vfs/vfs.git tree. Patches in the vfs.fixes branch should appear in linux-next soon.
Please report any outstanding bugs that were missed during review in a new review to the original patch series allowing us to drop it.
It's encouraged to provide Acked-bys and Reviewed-bys even though the patch has now been applied. If possible patch trailers will be updated.
Note that commit hashes shown below are subject to change due to rebase, trailer updates or similar. If in doubt, please check the listed branch.
tree: https://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs.git branch: vfs.fixes
[1/1] netfs: Fix unbuffered write error handling https://git.kernel.org/vfs/vfs/c/a3de58b12ce0
David Howells dhowells@redhat.com writes:
If all the subrequests in an unbuffered write stream fail, the subrequest collector doesn't update the stream->transferred value and it retains its initial LONG_MAX value. Unfortunately, if all active streams fail, then we take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set in wreq->transferred - which is then returned from ->write_iter().
LONG_MAX was chosen as the initial value so that all the streams can be quickly assessed by taking the smallest value of all stream->transferred - but this only works if we've set any of them.
Fix this by adding a flag to indicate whether the value in stream->transferred is valid and checking that when we integrate the values. stream->transferred can then be initialised to zero.
This was found by running the generic/750 xfstest against cifs with cache=none. It splices data to the target file. Once (if) it has used up all the available scratch space, the writes start failing with ENOSPC. This causes ->write_iter() to fail. However, it was returning wreq->transferred, i.e. LONG_MAX, rather than an error (because it thought the amount transferred was non-zero) and iter_file_splice_write() would then try to clean up that amount of pipe bufferage - leading to an oops when it overran. The kernel log showed:
CIFS: VFS: Send error in write = -28
followed by:
BUG: kernel NULL pointer dereference, address: 0000000000000008
with:
RIP: 0010:iter_file_splice_write+0x3a4/0x520 do_splice+0x197/0x4e0
or:
RIP: 0010:pipe_buf_release (include/linux/pipe_fs_i.h:282) iter_file_splice_write (fs/splice.c:755)
Also put a warning check into splice to announce if ->write_iter() returned that it had written more than it was asked to.
Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Reported-by: Xiaoli Feng fengxiaoli0714@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220445 Signed-off-by: David Howells dhowells@redhat.com cc: Paulo Alcantara pc@manguebit.org cc: Steve French sfrench@samba.org cc: Shyam Prasad N sprasad@microsoft.com cc: netfs@lists.linux.dev cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: stable@vger.kernel.org
fs/netfs/read_collect.c | 4 +++- fs/netfs/write_collect.c | 10 ++++++++-- fs/netfs/write_issue.c | 4 ++-- fs/splice.c | 3 +++ include/linux/netfs.h | 1 + 5 files changed, 17 insertions(+), 5 deletions(-)
Reviewed-by: Paulo Alcantara (Red Hat) pc@manguebit.org
linux-stable-mirror@lists.linaro.org