From: Andy Shevchenko andriy.shevchenko@linux.intel.com
[ Upstream commit 16076ca3a1565491bcb28689e555d569a39391c7 ]
There are two sites of the same brand: wch.cn and wch-ic.com. They are property of the same company, but it appears that they managed to get two different PCI vendor IDs. Rename them accordingly using standard pattern, i.e. PCI_VENDOR_ID_...
While at it, move to PCI_VDEVICE() in the ID tables.
Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Link: https://lore.kernel.org/r/20241204031114.1029882-2-andriy.shevchenko@linux.i... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/8250/8250_pci.c | 82 +++++++++++++++--------------- 1 file changed, 41 insertions(+), 41 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 6709b6a5f3011..82fba431a95cf 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -64,23 +64,23 @@ #define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 #define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d -#define PCI_VENDOR_ID_WCH 0x4348 -#define PCI_DEVICE_ID_WCH_CH352_2S 0x3253 -#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453 -#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046 -#define PCI_DEVICE_ID_WCH_CH353_1S1P 0x5053 -#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053 -#define PCI_DEVICE_ID_WCH_CH355_4S 0x7173 +#define PCI_VENDOR_ID_WCHCN 0x4348 +#define PCI_DEVICE_ID_WCHCN_CH352_2S 0x3253 +#define PCI_DEVICE_ID_WCHCN_CH353_4S 0x3453 +#define PCI_DEVICE_ID_WCHCN_CH353_2S1PF 0x5046 +#define PCI_DEVICE_ID_WCHCN_CH353_1S1P 0x5053 +#define PCI_DEVICE_ID_WCHCN_CH353_2S1P 0x7053 +#define PCI_DEVICE_ID_WCHCN_CH355_4S 0x7173 #define PCI_VENDOR_ID_AGESTAR 0x5372 #define PCI_DEVICE_ID_AGESTAR_9375 0x6872 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
-#define PCIE_VENDOR_ID_WCH 0x1c00 -#define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250 -#define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 -#define PCIE_DEVICE_ID_WCH_CH384_8S 0x3853 -#define PCIE_DEVICE_ID_WCH_CH382_2S 0x3253 +#define PCI_VENDOR_ID_WCHIC 0x1c00 +#define PCI_DEVICE_ID_WCHIC_CH382_2S1P 0x3250 +#define PCI_DEVICE_ID_WCHIC_CH384_4S 0x3470 +#define PCI_DEVICE_ID_WCHIC_CH384_8S 0x3853 +#define PCI_DEVICE_ID_WCHIC_CH382_2S 0x3253
#define PCI_DEVICE_ID_MOXA_CP102E 0x1024 #define PCI_DEVICE_ID_MOXA_CP102EL 0x1025 @@ -2777,80 +2777,80 @@ static struct pci_serial_quirk pci_serial_quirks[] = { }, /* WCH CH353 1S1P card (16550 clone) */ { - .vendor = PCI_VENDOR_ID_WCH, - .device = PCI_DEVICE_ID_WCH_CH353_1S1P, + .vendor = PCI_VENDOR_ID_WCHCN, + .device = PCI_DEVICE_ID_WCHCN_CH353_1S1P, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .setup = pci_wch_ch353_setup, }, /* WCH CH353 2S1P card (16550 clone) */ { - .vendor = PCI_VENDOR_ID_WCH, - .device = PCI_DEVICE_ID_WCH_CH353_2S1P, + .vendor = PCI_VENDOR_ID_WCHCN, + .device = PCI_DEVICE_ID_WCHCN_CH353_2S1P, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .setup = pci_wch_ch353_setup, }, /* WCH CH353 4S card (16550 clone) */ { - .vendor = PCI_VENDOR_ID_WCH, - .device = PCI_DEVICE_ID_WCH_CH353_4S, + .vendor = PCI_VENDOR_ID_WCHCN, + .device = PCI_DEVICE_ID_WCHCN_CH353_4S, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .setup = pci_wch_ch353_setup, }, /* WCH CH353 2S1PF card (16550 clone) */ { - .vendor = PCI_VENDOR_ID_WCH, - .device = PCI_DEVICE_ID_WCH_CH353_2S1PF, + .vendor = PCI_VENDOR_ID_WCHCN, + .device = PCI_DEVICE_ID_WCHCN_CH353_2S1PF, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .setup = pci_wch_ch353_setup, }, /* WCH CH352 2S card (16550 clone) */ { - .vendor = PCI_VENDOR_ID_WCH, - .device = PCI_DEVICE_ID_WCH_CH352_2S, + .vendor = PCI_VENDOR_ID_WCHCN, + .device = PCI_DEVICE_ID_WCHCN_CH352_2S, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .setup = pci_wch_ch353_setup, }, /* WCH CH355 4S card (16550 clone) */ { - .vendor = PCI_VENDOR_ID_WCH, - .device = PCI_DEVICE_ID_WCH_CH355_4S, + .vendor = PCI_VENDOR_ID_WCHCN, + .device = PCI_DEVICE_ID_WCHCN_CH355_4S, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .setup = pci_wch_ch355_setup, }, /* WCH CH382 2S card (16850 clone) */ { - .vendor = PCIE_VENDOR_ID_WCH, - .device = PCIE_DEVICE_ID_WCH_CH382_2S, + .vendor = PCI_VENDOR_ID_WCHIC, + .device = PCI_DEVICE_ID_WCHIC_CH382_2S, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .setup = pci_wch_ch38x_setup, }, /* WCH CH382 2S1P card (16850 clone) */ { - .vendor = PCIE_VENDOR_ID_WCH, - .device = PCIE_DEVICE_ID_WCH_CH382_2S1P, + .vendor = PCI_VENDOR_ID_WCHIC, + .device = PCI_DEVICE_ID_WCHIC_CH382_2S1P, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .setup = pci_wch_ch38x_setup, }, /* WCH CH384 4S card (16850 clone) */ { - .vendor = PCIE_VENDOR_ID_WCH, - .device = PCIE_DEVICE_ID_WCH_CH384_4S, + .vendor = PCI_VENDOR_ID_WCHIC, + .device = PCI_DEVICE_ID_WCHIC_CH384_4S, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .setup = pci_wch_ch38x_setup, }, /* WCH CH384 8S card (16850 clone) */ { - .vendor = PCIE_VENDOR_ID_WCH, - .device = PCIE_DEVICE_ID_WCH_CH384_8S, + .vendor = PCI_VENDOR_ID_WCHIC, + .device = PCI_DEVICE_ID_WCHIC_CH384_8S, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .init = pci_wch_ch38x_init, @@ -3927,11 +3927,11 @@ static const struct pci_device_id blacklist[] = {
/* multi-io cards handled by parport_serial */ /* WCH CH353 2S1P */ - { PCI_DEVICE(0x4348, 0x7053), 0, 0, REPORT_CONFIG(PARPORT_SERIAL), }, + { PCI_VDEVICE(WCHCN, 0x7053), REPORT_CONFIG(PARPORT_SERIAL), }, /* WCH CH353 1S1P */ - { PCI_DEVICE(0x4348, 0x5053), 0, 0, REPORT_CONFIG(PARPORT_SERIAL), }, + { PCI_VDEVICE(WCHCN, 0x5053), REPORT_CONFIG(PARPORT_SERIAL), }, /* WCH CH382 2S1P */ - { PCI_DEVICE(0x1c00, 0x3250), 0, 0, REPORT_CONFIG(PARPORT_SERIAL), }, + { PCI_VDEVICE(WCHIC, 0x3250), REPORT_CONFIG(PARPORT_SERIAL), },
/* Intel platforms with MID UART */ { PCI_VDEVICE(INTEL, 0x081b), REPORT_8250_CONFIG(MID), }, @@ -6004,27 +6004,27 @@ static const struct pci_device_id serial_pci_tbl[] = { * WCH CH353 series devices: The 2S1P is handled by parport_serial * so not listed here. */ - { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_4S, + { PCI_VENDOR_ID_WCHCN, PCI_DEVICE_ID_WCHCN_CH353_4S, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_4_115200 },
- { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_2S1PF, + { PCI_VENDOR_ID_WCHCN, PCI_DEVICE_ID_WCHCN_CH353_2S1PF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_115200 },
- { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH355_4S, + { PCI_VENDOR_ID_WCHCN, PCI_DEVICE_ID_WCHCN_CH355_4S, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_4_115200 },
- { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH382_2S, + { PCI_VENDOR_ID_WCHIC, PCI_DEVICE_ID_WCHIC_CH382_2S, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_wch382_2 },
- { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S, + { PCI_VENDOR_ID_WCHIC, PCI_DEVICE_ID_WCHIC_CH384_4S, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_wch384_4 },
- { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_8S, + { PCI_VENDOR_ID_WCHIC, PCI_DEVICE_ID_WCHIC_CH384_8S, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_wch384_8 }, /*
From: Andy Shevchenko andriy.shevchenko@linux.intel.com
[ Upstream commit 535a07698b8b3e6f305673102d297262cae2360a ]
parport_serial driver uses subset of WCH IDs that are present in 8250_pci. Share them via pci_ids.h and switch parport_serial to use defined constants.
Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Link: https://lore.kernel.org/r/20241204031114.1029882-3-andriy.shevchenko@linux.i... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/parport/parport_serial.c | 12 ++++++++---- drivers/tty/serial/8250/8250_pci.c | 10 ++-------- include/linux/pci_ids.h | 11 +++++++++++ 3 files changed, 21 insertions(+), 12 deletions(-)
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index 3644997a83425..24d4f3a3ec3d0 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -266,10 +266,14 @@ static struct pci_device_id parport_serial_pci_tbl[] = { { 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
/* WCH CARDS */ - { 0x4348, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, wch_ch353_1s1p}, - { 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p}, - { 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382_0s1p}, - { 0x1c00, 0x3250, 0x1c00, 0x3250, 0, 0, wch_ch382_2s1p}, + { PCI_VENDOR_ID_WCHCN, PCI_DEVICE_ID_WCHCN_CH353_1S1P, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, wch_ch353_1s1p }, + { PCI_VENDOR_ID_WCHCN, PCI_DEVICE_ID_WCHCN_CH353_2S1P, + 0x4348, 0x3253, 0, 0, wch_ch353_2s1p }, + { PCI_VENDOR_ID_WCHIC, PCI_DEVICE_ID_WCHIC_CH382_0S1P, + 0x1c00, 0x3050, 0, 0, wch_ch382_0s1p }, + { PCI_VENDOR_ID_WCHIC, PCI_DEVICE_ID_WCHIC_CH382_2S1P, + 0x1c00, 0x3250, 0, 0, wch_ch382_2s1p },
/* BrainBoxes PX272/PX306 MIO card */ { PCI_VENDOR_ID_INTASHIELD, 0x4100, diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 82fba431a95cf..de6d90bf0d70a 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -64,23 +64,17 @@ #define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 #define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d -#define PCI_VENDOR_ID_WCHCN 0x4348 + #define PCI_DEVICE_ID_WCHCN_CH352_2S 0x3253 -#define PCI_DEVICE_ID_WCHCN_CH353_4S 0x3453 -#define PCI_DEVICE_ID_WCHCN_CH353_2S1PF 0x5046 -#define PCI_DEVICE_ID_WCHCN_CH353_1S1P 0x5053 -#define PCI_DEVICE_ID_WCHCN_CH353_2S1P 0x7053 #define PCI_DEVICE_ID_WCHCN_CH355_4S 0x7173 + #define PCI_VENDOR_ID_AGESTAR 0x5372 #define PCI_DEVICE_ID_AGESTAR_9375 0x6872 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
-#define PCI_VENDOR_ID_WCHIC 0x1c00 -#define PCI_DEVICE_ID_WCHIC_CH382_2S1P 0x3250 #define PCI_DEVICE_ID_WCHIC_CH384_4S 0x3470 #define PCI_DEVICE_ID_WCHIC_CH384_8S 0x3853 -#define PCI_DEVICE_ID_WCHIC_CH382_2S 0x3253
#define PCI_DEVICE_ID_MOXA_CP102E 0x1024 #define PCI_DEVICE_ID_MOXA_CP102EL 0x1025 diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 4cf6aaed5f35d..22f6b018cff8d 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2589,6 +2589,11 @@
#define PCI_VENDOR_ID_REDHAT 0x1b36
+#define PCI_VENDOR_ID_WCHIC 0x1c00 +#define PCI_DEVICE_ID_WCHIC_CH382_0S1P 0x3050 +#define PCI_DEVICE_ID_WCHIC_CH382_2S1P 0x3250 +#define PCI_DEVICE_ID_WCHIC_CH382_2S 0x3253 + #define PCI_VENDOR_ID_SILICOM_DENMARK 0x1c2c
#define PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS 0x1c36 @@ -2643,6 +2648,12 @@ #define PCI_VENDOR_ID_AKS 0x416c #define PCI_DEVICE_ID_AKS_ALADDINCARD 0x0100
+#define PCI_VENDOR_ID_WCHCN 0x4348 +#define PCI_DEVICE_ID_WCHCN_CH353_4S 0x3453 +#define PCI_DEVICE_ID_WCHCN_CH353_2S1PF 0x5046 +#define PCI_DEVICE_ID_WCHCN_CH353_1S1P 0x5053 +#define PCI_DEVICE_ID_WCHCN_CH353_2S1P 0x7053 + #define PCI_VENDOR_ID_ACCESSIO 0x494f #define PCI_DEVICE_ID_ACCESSIO_WDG_CSM 0x22c0
From: Rengarajan S rengarajan.s@microchip.com
[ Upstream commit e95cb63e57381f00d9274533ea7fd0ac3bf4e5b0 ]
In the B0 revision, the RTS pin remains high due to incorrect hardware mapping. To address this issue, enable auto-direction control with the RTS bit in ADCL_CFG_REG. This configuration ensures that the RTS pin goes low when the terminal is opened and high when the terminal is closed. Additionally, we reset the step counter for Rx and Tx engines by writing into FRAC_DIV_CFG_REG.
Signed-off-by: Rengarajan S rengarajan.s@microchip.com Link: https://lore.kernel.org/r/20241218094017.18290-1-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/8250/8250_pci1xxxx.c | 60 ++++++++++++++++++++++++- 1 file changed, 59 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c index d3930bf32fe4c..f462b3d1c104c 100644 --- a/drivers/tty/serial/8250/8250_pci1xxxx.c +++ b/drivers/tty/serial/8250/8250_pci1xxxx.c @@ -78,6 +78,12 @@ #define UART_TX_BYTE_FIFO 0x00 #define UART_FIFO_CTL 0x02
+#define UART_MODEM_CTL_REG 0x04 +#define UART_MODEM_CTL_RTS_SET BIT(1) + +#define UART_LINE_STAT_REG 0x05 +#define UART_LINE_XMIT_CHECK_MASK GENMASK(6, 5) + #define UART_ACTV_REG 0x11 #define UART_BLOCK_SET_ACTIVE BIT(0)
@@ -94,6 +100,7 @@ #define UART_BIT_SAMPLE_CNT_16 16 #define BAUD_CLOCK_DIV_INT_MSK GENMASK(31, 8) #define ADCL_CFG_RTS_DELAY_MASK GENMASK(11, 8) +#define FRAC_DIV_TX_END_POINT_MASK GENMASK(23, 20)
#define UART_WAKE_REG 0x8C #define UART_WAKE_MASK_REG 0x90 @@ -134,6 +141,11 @@ #define UART_BST_STAT_LSR_FRAME_ERR 0x8000000 #define UART_BST_STAT_LSR_THRE 0x20000000
+#define GET_MODEM_CTL_RTS_STATUS(reg) ((reg) & UART_MODEM_CTL_RTS_SET) +#define GET_RTS_PIN_STATUS(val) (((val) & TIOCM_RTS) >> 1) +#define RTS_TOGGLE_STATUS_MASK(val, reg) (GET_MODEM_CTL_RTS_STATUS(reg) \ + != GET_RTS_PIN_STATUS(val)) + struct pci1xxxx_8250 { unsigned int nr; u8 dev_rev; @@ -254,6 +266,47 @@ static void pci1xxxx_set_divisor(struct uart_port *port, unsigned int baud, port->membase + UART_BAUD_CLK_DIVISOR_REG); }
+static void pci1xxxx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + u32 fract_div_cfg_reg; + u32 line_stat_reg; + u32 modem_ctl_reg; + u32 adcl_cfg_reg; + + adcl_cfg_reg = readl(port->membase + ADCL_CFG_REG); + + /* HW is responsible in ADCL_EN case */ + if ((adcl_cfg_reg & (ADCL_CFG_EN | ADCL_CFG_PIN_SEL))) + return; + + modem_ctl_reg = readl(port->membase + UART_MODEM_CTL_REG); + + serial8250_do_set_mctrl(port, mctrl); + + if (RTS_TOGGLE_STATUS_MASK(mctrl, modem_ctl_reg)) { + line_stat_reg = readl(port->membase + UART_LINE_STAT_REG); + if (line_stat_reg & UART_LINE_XMIT_CHECK_MASK) { + fract_div_cfg_reg = readl(port->membase + + FRAC_DIV_CFG_REG); + + writel((fract_div_cfg_reg & + ~(FRAC_DIV_TX_END_POINT_MASK)), + port->membase + FRAC_DIV_CFG_REG); + + /* Enable ADC and set the nRTS pin */ + writel((adcl_cfg_reg | (ADCL_CFG_EN | + ADCL_CFG_PIN_SEL)), + port->membase + ADCL_CFG_REG); + + /* Revert to the original settings */ + writel(adcl_cfg_reg, port->membase + ADCL_CFG_REG); + + writel(fract_div_cfg_reg, port->membase + + FRAC_DIV_CFG_REG); + } + } +} + static int pci1xxxx_rs485_config(struct uart_port *port, struct ktermios *termios, struct serial_rs485 *rs485) @@ -631,9 +684,14 @@ static int pci1xxxx_setup(struct pci_dev *pdev, port->port.rs485_config = pci1xxxx_rs485_config; port->port.rs485_supported = pci1xxxx_rs485_supported;
- /* From C0 rev Burst operation is supported */ + /* + * C0 and later revisions support Burst operation. + * RTS workaround in mctrl is applicable only to B0. + */ if (rev >= 0xC0) port->port.handle_irq = pci1xxxx_handle_irq; + else if (rev == 0xB0) + port->port.set_mctrl = pci1xxxx_set_mctrl;
ret = serial8250_pci_setup_port(pdev, port, 0, PORT_OFFSET * port_idx, 0); if (ret < 0)
From: Brian Norris briannorris@chromium.org
[ Upstream commit 7687c66c18c66d4ccd9949c6f641c0e7b5773483 ]
If the <kunit/platform_device.h> header is included in a test without certain other headers, it produces compiler warnings like:
In file included from [...] ../include/kunit/platform_device.h:15:57: warning: ‘struct completion’ declared inside parameter list will not be visible outside of this definition or declaration 15 | struct completion *x); | ^~~~~~~~~~
Add a 'struct completion' forward declaration to resolve this.
Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202412241958.dbAImJsA-lkp@intel.com/ Signed-off-by: Brian Norris briannorris@chromium.org Reviewed-by: David Gow davidgow@google.com Link: https://lore.kernel.org/r/20241213180841.3023843-1-briannorris@chromium.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/kunit/platform_device.h | 1 + 1 file changed, 1 insertion(+)
diff --git a/include/kunit/platform_device.h b/include/kunit/platform_device.h index 0fc0999d2420a..f8236a8536f7e 100644 --- a/include/kunit/platform_device.h +++ b/include/kunit/platform_device.h @@ -2,6 +2,7 @@ #ifndef _KUNIT_PLATFORM_DRIVER_H #define _KUNIT_PLATFORM_DRIVER_H
+struct completion; struct kunit; struct platform_device; struct platform_driver;
From: Ramesh Thomas ramesh.thomas@intel.com
[ Upstream commit 2b938e3db335e3670475e31a722c2bee34748c5a ]
Definitions of ioread64 and iowrite64 macros in asm/io.h called by vfio pci implementations are enclosed inside check for CONFIG_GENERIC_IOMAP. They don't get defined if CONFIG_GENERIC_IOMAP is defined. Include linux/io-64-nonatomic-lo-hi.h to define iowrite64 and ioread64 macros when they are not defined. io-64-nonatomic-lo-hi.h maps the macros to generic implementation in lib/iomap.c. The generic implementation does 64 bit rw if readq/writeq is defined for the architecture, otherwise it would do 32 bit back to back rw.
Note that there are two versions of the generic implementation that differs in the order the 32 bit words are written if 64 bit support is not present. This is not the little/big endian ordering, which is handled separately. This patch uses the lo followed by hi word ordering which is consistent with current back to back implementation in the vfio/pci code.
Signed-off-by: Ramesh Thomas ramesh.thomas@intel.com Reviewed-by: Jason Gunthorpe jgg@nvidia.com Link: https://lore.kernel.org/r/20241210131938.303500-2-ramesh.thomas@intel.com Signed-off-by: Alex Williamson alex.williamson@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vfio/pci/vfio_pci_rdwr.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/vfio/pci/vfio_pci_rdwr.c b/drivers/vfio/pci/vfio_pci_rdwr.c index 66b72c2892841..a0595c745732a 100644 --- a/drivers/vfio/pci/vfio_pci_rdwr.c +++ b/drivers/vfio/pci/vfio_pci_rdwr.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <linux/vfio.h> #include <linux/vgaarb.h> +#include <linux/io-64-nonatomic-lo-hi.h>
#include "vfio_pci_priv.h"
From: Zichen Xie zichenxie0106@gmail.com
[ Upstream commit 49fd4e34751e90e6df009b70cd0659dc839e7ca8 ]
name is char[64] where the size of clnt->cl_program->name remains unknown. Invoking strcat() directly will also lead to potential buffer overflow. Change them to strscpy() and strncat() to fix potential issues.
Signed-off-by: Zichen Xie zichenxie0106@gmail.com Reviewed-by: Benjamin Coddington bcodding@redhat.com Signed-off-by: Anna Schumaker anna.schumaker@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/sysfs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/nfs/sysfs.c b/fs/nfs/sysfs.c index bf378ecd5d9fd..7b59a40d40c06 100644 --- a/fs/nfs/sysfs.c +++ b/fs/nfs/sysfs.c @@ -280,9 +280,9 @@ void nfs_sysfs_link_rpc_client(struct nfs_server *server, char name[RPC_CLIENT_NAME_SIZE]; int ret;
- strcpy(name, clnt->cl_program->name); - strcat(name, uniq ? uniq : ""); - strcat(name, "_client"); + strscpy(name, clnt->cl_program->name, sizeof(name)); + strncat(name, uniq ? uniq : "", sizeof(name) - strlen(name) - 1); + strncat(name, "_client", sizeof(name) - strlen(name) - 1);
ret = sysfs_create_link_nowarn(&server->kobj, &clnt->cl_sysfs->kobject, name);
From: Ankit Agrawal ankita@nvidia.com
[ Upstream commit bd53764a60ad586ad5b6ed339423ad5e67824464 ]
NVIDIA's recently introduced Grace Blackwell (GB) Superchip is a continuation with the Grace Hopper (GH) superchip that provides a cache coherent access to CPU and GPU to each other's memory with an internal proprietary chip-to-chip cache coherent interconnect.
There is a HW defect on GH systems to support the Multi-Instance GPU (MIG) feature [1] that necessiated the presence of a 1G region with uncached mapping carved out from the device memory. The 1G region is shown as a fake BAR (comprising region 2 and 3) to workaround the issue. This is fixed on the GB systems.
The presence of the fix for the HW defect is communicated by the device firmware through the DVSEC PCI config register with ID 3. The module reads this to take a different codepath on GB vs GH.
Scan through the DVSEC registers to identify the correct one and use it to determine the presence of the fix. Save the value in the device's nvgrace_gpu_pci_core_device structure.
Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu/ [1]
CC: Jason Gunthorpe jgg@nvidia.com CC: Kevin Tian kevin.tian@intel.com Signed-off-by: Ankit Agrawal ankita@nvidia.com Link: https://lore.kernel.org/r/20250124183102.3976-2-ankita@nvidia.com Signed-off-by: Alex Williamson alex.williamson@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vfio/pci/nvgrace-gpu/main.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
diff --git a/drivers/vfio/pci/nvgrace-gpu/main.c b/drivers/vfio/pci/nvgrace-gpu/main.c index a7fd018aa5483..178ee4180d5c4 100644 --- a/drivers/vfio/pci/nvgrace-gpu/main.c +++ b/drivers/vfio/pci/nvgrace-gpu/main.c @@ -23,6 +23,11 @@ /* A hardwired and constant ABI value between the GPU FW and VFIO driver. */ #define MEMBLK_SIZE SZ_512M
+#define DVSEC_BITMAP_OFFSET 0xA +#define MIG_SUPPORTED_WITH_CACHED_RESMEM BIT(0) + +#define GPU_CAP_DVSEC_REGISTER 3 + /* * The state of the two device memory region - resmem and usemem - is * saved as struct mem_region. @@ -46,6 +51,7 @@ struct nvgrace_gpu_pci_core_device { struct mem_region resmem; /* Lock to control device memory kernel mapping */ struct mutex remap_lock; + bool has_mig_hw_bug; };
static void nvgrace_gpu_init_fake_bar_emu_regs(struct vfio_device *core_vdev) @@ -812,6 +818,26 @@ nvgrace_gpu_init_nvdev_struct(struct pci_dev *pdev, return ret; }
+static bool nvgrace_gpu_has_mig_hw_bug(struct pci_dev *pdev) +{ + int pcie_dvsec; + u16 dvsec_ctrl16; + + pcie_dvsec = pci_find_dvsec_capability(pdev, PCI_VENDOR_ID_NVIDIA, + GPU_CAP_DVSEC_REGISTER); + + if (pcie_dvsec) { + pci_read_config_word(pdev, + pcie_dvsec + DVSEC_BITMAP_OFFSET, + &dvsec_ctrl16); + + if (dvsec_ctrl16 & MIG_SUPPORTED_WITH_CACHED_RESMEM) + return false; + } + + return true; +} + static int nvgrace_gpu_probe(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -832,6 +858,8 @@ static int nvgrace_gpu_probe(struct pci_dev *pdev, dev_set_drvdata(&pdev->dev, &nvdev->core_device);
if (ops == &nvgrace_gpu_pci_ops) { + nvdev->has_mig_hw_bug = nvgrace_gpu_has_mig_hw_bug(pdev); + /* * Device memory properties are identified in the host ACPI * table. Set the nvgrace_gpu_pci_core_device structure.
From: Ankit Agrawal ankita@nvidia.com
[ Upstream commit 6a9eb2d125ba90d13b45bcfabcddf9f61268f6a8 ]
There is a HW defect on Grace Hopper (GH) to support the Multi-Instance GPU (MIG) feature [1] that necessiated the presence of a 1G region carved out from the device memory and mapped as uncached. The 1G region is shown as a fake BAR (comprising region 2 and 3) to workaround the issue.
The Grace Blackwell systems (GB) differ from GH systems in the following aspects: 1. The aforementioned HW defect is fixed on GB systems. 2. There is a usable BAR1 (region 2 and 3) on GB systems for the GPUdirect RDMA feature [2].
This patch accommodate those GB changes by showing the 64b physical device BAR1 (region2 and 3) to the VM instead of the fake one. This takes care of both the differences.
Moreover, the entire device memory is exposed on GB as cacheable to the VM as there is no carveout required.
Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu/ [1] Link: https://docs.nvidia.com/cuda/gpudirect-rdma/ [2]
Cc: Kevin Tian kevin.tian@intel.com CC: Jason Gunthorpe jgg@nvidia.com Suggested-by: Alex Williamson alex.williamson@redhat.com Signed-off-by: Ankit Agrawal ankita@nvidia.com Link: https://lore.kernel.org/r/20250124183102.3976-3-ankita@nvidia.com Signed-off-by: Alex Williamson alex.williamson@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vfio/pci/nvgrace-gpu/main.c | 67 +++++++++++++++++++---------- 1 file changed, 45 insertions(+), 22 deletions(-)
diff --git a/drivers/vfio/pci/nvgrace-gpu/main.c b/drivers/vfio/pci/nvgrace-gpu/main.c index 178ee4180d5c4..9e1c57baab64a 100644 --- a/drivers/vfio/pci/nvgrace-gpu/main.c +++ b/drivers/vfio/pci/nvgrace-gpu/main.c @@ -17,9 +17,6 @@ #define RESMEM_REGION_INDEX VFIO_PCI_BAR2_REGION_INDEX #define USEMEM_REGION_INDEX VFIO_PCI_BAR4_REGION_INDEX
-/* Memory size expected as non cached and reserved by the VM driver */ -#define RESMEM_SIZE SZ_1G - /* A hardwired and constant ABI value between the GPU FW and VFIO driver. */ #define MEMBLK_SIZE SZ_512M
@@ -72,7 +69,7 @@ nvgrace_gpu_memregion(int index, if (index == USEMEM_REGION_INDEX) return &nvdev->usemem;
- if (index == RESMEM_REGION_INDEX) + if (nvdev->resmem.memlength && index == RESMEM_REGION_INDEX) return &nvdev->resmem;
return NULL; @@ -757,40 +754,67 @@ nvgrace_gpu_init_nvdev_struct(struct pci_dev *pdev, u64 memphys, u64 memlength) { int ret = 0; + u64 resmem_size = 0;
/* - * The VM GPU device driver needs a non-cacheable region to support - * the MIG feature. Since the device memory is mapped as NORMAL cached, - * carve out a region from the end with a different NORMAL_NC - * property (called as reserved memory and represented as resmem). This - * region then is exposed as a 64b BAR (region 2 and 3) to the VM, while - * exposing the rest (termed as usable memory and represented using usemem) - * as cacheable 64b BAR (region 4 and 5). + * On Grace Hopper systems, the VM GPU device driver needs a non-cacheable + * region to support the MIG feature owing to a hardware bug. Since the + * device memory is mapped as NORMAL cached, carve out a region from the end + * with a different NORMAL_NC property (called as reserved memory and + * represented as resmem). This region then is exposed as a 64b BAR + * (region 2 and 3) to the VM, while exposing the rest (termed as usable + * memory and represented using usemem) as cacheable 64b BAR (region 4 and 5). * * devmem (memlength) * |-------------------------------------------------| * | | * usemem.memphys resmem.memphys + * + * This hardware bug is fixed on the Grace Blackwell platforms and the + * presence of the bug can be determined through nvdev->has_mig_hw_bug. + * Thus on systems with the hardware fix, there is no need to partition + * the GPU device memory and the entire memory is usable and mapped as + * NORMAL cached (i.e. resmem size is 0). */ + if (nvdev->has_mig_hw_bug) + resmem_size = SZ_1G; + nvdev->usemem.memphys = memphys;
/* * The device memory exposed to the VM is added to the kernel by the - * VM driver module in chunks of memory block size. Only the usable - * memory (usemem) is added to the kernel for usage by the VM - * workloads. Make the usable memory size memblock aligned. + * VM driver module in chunks of memory block size. Note that only the + * usable memory (usemem) is added to the kernel for usage by the VM + * workloads. */ - if (check_sub_overflow(memlength, RESMEM_SIZE, + if (check_sub_overflow(memlength, resmem_size, &nvdev->usemem.memlength)) { ret = -EOVERFLOW; goto done; }
/* - * The USEMEM part of the device memory has to be MEMBLK_SIZE - * aligned. This is a hardwired ABI value between the GPU FW and - * VFIO driver. The VM device driver is also aware of it and make - * use of the value for its calculation to determine USEMEM size. + * The usemem region is exposed as a 64B Bar composed of region 4 and 5. + * Calculate and save the BAR size for the region. + */ + nvdev->usemem.bar_size = roundup_pow_of_two(nvdev->usemem.memlength); + + /* + * If the hardware has the fix for MIG, there is no requirement + * for splitting the device memory to create RESMEM. The entire + * device memory is usable and will be USEMEM. Return here for + * such case. + */ + if (!nvdev->has_mig_hw_bug) + goto done; + + /* + * When the device memory is split to workaround the MIG bug on + * Grace Hopper, the USEMEM part of the device memory has to be + * MEMBLK_SIZE aligned. This is a hardwired ABI value between the + * GPU FW and VFIO driver. The VM device driver is also aware of it + * and make use of the value for its calculation to determine USEMEM + * size. Note that the device memory may not be 512M aligned. */ nvdev->usemem.memlength = round_down(nvdev->usemem.memlength, MEMBLK_SIZE); @@ -809,10 +833,9 @@ nvgrace_gpu_init_nvdev_struct(struct pci_dev *pdev, }
/* - * The memory regions are exposed as BARs. Calculate and save - * the BAR size for them. + * The resmem region is exposed as a 64b BAR composed of region 2 and 3 + * for Grace Hopper. Calculate and save the BAR size for the region. */ - nvdev->usemem.bar_size = roundup_pow_of_two(nvdev->usemem.memlength); nvdev->resmem.bar_size = roundup_pow_of_two(nvdev->resmem.memlength); done: return ret;
linux-stable-mirror@lists.linaro.org
-
Sasha Levin