From: Utkarsh Patel utkarsh.h.patel@intel.com

According to the PMC Type C Subsystem (TCSS) Mux programming guide rev 0.7, bit 14 is reserved in Alternate mode. In DP Alternate Mode state, if the HPD_STATE (bit 7) field in the status update command VDO is set to HPD_HIGH, HPD is configured via separate HPD mode request after configuring DP Alternate mode request. Configuring reserved bit may show unexpected behaviour. So do not configure them while issuing the Alternate Mode request.

Fixes: 7990be48ef4d ("usb: typec: mux: intel: Handle alt mode HPD_HIGH") Cc: stable@vger.kernel.org Signed-off-by: Utkarsh Patel utkarsh.h.patel@intel.com Signed-off-by: Heikki Krogerus heikki.krogerus@linux.intel.com --- drivers/usb/typec/mux/intel_pmc_mux.c | 4 ---- 1 file changed, 4 deletions(-)

diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c index e4021e13af40a..802d443b367c6 100644 --- a/drivers/usb/typec/mux/intel_pmc_mux.c +++ b/drivers/usb/typec/mux/intel_pmc_mux.c @@ -68,7 +68,6 @@ enum { #define PMC_USB_ALTMODE_DP_MODE_SHIFT 8

/* TBT specific Mode Data bits */ -#define PMC_USB_ALTMODE_HPD_HIGH BIT(14) #define PMC_USB_ALTMODE_TBT_TYPE BIT(17) #define PMC_USB_ALTMODE_CABLE_TYPE BIT(18) #define PMC_USB_ALTMODE_ACTIVE_LINK BIT(20) @@ -185,9 +184,6 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state) req.mode_data |= (state->mode - TYPEC_STATE_MODAL) << PMC_USB_ALTMODE_DP_MODE_SHIFT;

- if (data->status & DP_STATUS_HPD_STATE) - req.mode_data |= PMC_USB_ALTMODE_HPD_HIGH; - ret = pmc_usb_command(port, (void *)&req, sizeof(req)); if (ret) return ret;