Hi,

On 1/3/21 4:36 AM, Jiaxun Yang wrote:

Newer ideapads (e.g.: Yoga 14s, 720S 14) come with ELAN0634 touchpad do not use EC to switch touchpad.

Reading VPCCMD_R_TOUCHPAD will return zero thus touchpad may be blocked unexpectedly. Writing VPCCMD_W_TOUCHPAD may cause a spurious key press.

Add has_touchpad_switch to workaround these machines.

Signed-off-by: Jiaxun Yang jiaxun.yang@flygoat.com Cc: stable@vger.kernel.org # 5.4+ -- v2: Specify touchpad to ELAN0634 v3: Stupid missing ! in v2

---

drivers/platform/x86/ideapad-laptop.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 7598cd46cf60..427970b3b0da 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -92,6 +92,7 @@ struct ideapad_private { struct dentry *debug; unsigned long cfg; bool has_hw_rfkill_switch;

• bool has_touchpad_switch; const char *fnesc_guid;

}; @@ -535,7 +536,9 @@ static umode_t ideapad_is_visible(struct kobject *kobj, } else if (attr == &dev_attr_fn_lock.attr) { supported = acpi_has_method(priv->adev->handle, "HALS") && acpi_has_method(priv->adev->handle, "SALS");

• } else

• } else if (attr == &dev_attr_touchpad.attr)

• supported = priv->has_touchpad_switch;
  

• else supported = true;

return supported ? attr->mode : 0; @@ -867,6 +870,9 @@ static void ideapad_sync_touchpad_state(struct ideapad_private *priv) { unsigned long value;

• if (!priv->has_touchpad_switch)

• return;
  

• /* Without reading from EC touchpad LED doesn't switch state */ if (!read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &value)) { /* Some IdeaPads don't really turn off touchpad - they only

@@ -989,6 +995,9 @@ static int ideapad_acpi_add(struct platform_device *pdev) priv->platform_device = pdev; priv->has_hw_rfkill_switch = dmi_check_system(hw_rfkill_list);

• /* Most ideapads with ELAN0634 touchpad don't use EC touchpad switch */
• priv->has_touchpad_switch = !acpi_dev_present("PNP0C50", "ELAN0634", -1);

That is not how acpi_dev_present works:

/** * acpi_dev_present - Detect that a given ACPI device is present * @hid: Hardware ID of the device. * @uid: Unique ID of the device, pass NULL to not check _UID * @hrv: Hardware Revision of the device, pass -1 to not check _HRV * * Return %true if a matching device was present at the moment of invocation. ... */ bool acpi_dev_present(const char *hid, const char *uid, s64 hrv);

The second argument tests for the UID, which is typically "1", "2", "3", etc. and which is used when there are multiple devices with the same HID.

For example the GPIO controllers on many Intel chipsets have so called south and north islands, which are separate devices with the same HID, but one has a UID of "1" and the other of "2".

If you want to check for a device with a HID or CID of "ELAN0634" then you should do:

priv->has_touchpad_switch = !acpi_dev_present("ELAN0634", NULL, -1);

Regards,

Hans

ret = ideapad_sysfs_init(priv); if (ret) return ret; @@ -1006,6 +1015,10 @@ static int ideapad_acpi_add(struct platform_device *pdev) if (!priv->has_hw_rfkill_switch) write_ec_cmd(priv->adev->handle, VPCCMD_W_RF, 1);

• /* The same for Touchpad */
• if (!priv->has_touchpad_switch)

• write_ec_cmd(priv->adev->handle, VPCCMD_W_TOUCHPAD, 1);
  

• for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) if (test_bit(ideapad_rfk_data[i].cfgbit, &priv->cfg)) ideapad_register_rfkill(priv, i);