This is the start of the stable review cycle for the 4.14.269 release. There are 31 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.269-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 4.14.269-rc1
Linus Torvalds torvalds@linux-foundation.org fget: clarify and improve __fget_files() implementation
Miaohe Lin linmiaohe@huawei.com memblock: use kfree() to release kmalloced memblock regions
Karol Herbst kherbst@redhat.com Revert "drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR"
daniel.starke@siemens.com daniel.starke@siemens.com tty: n_gsm: fix proper link termination after failed open
daniel.starke@siemens.com daniel.starke@siemens.com tty: n_gsm: fix encoding of control signal octet bit DV
Hongyu Xie xiehongyu1@kylinos.cn xhci: Prevent futile URB re-submissions due to incorrect return value.
Puma Hsu pumahsu@google.com xhci: re-initialize the HC during resume if HCE was set
Sebastian Andrzej Siewior bigeasy@linutronix.de usb: dwc3: gadget: Let the interrupt handler disable bottom halves.
Daniele Palmas dnlplm@gmail.com USB: serial: option: add Telit LE910R1 compositions
Slark Xiao slark_xiao@163.com USB: serial: option: add support for DW5829e
Steven Rostedt (Google) rostedt@goodmis.org tracefs: Set the group ownership in apply_options() not parse_options()
Szymon Heidrich szymon.heidrich@gmail.com USB: gadget: validate endpoint index for xilinx udc
Daehwan Jung dh10.jung@samsung.com usb: gadget: rndis: add spinlock for rndis response list
Dmytro Bagrii dimich.dmb@gmail.com Revert "USB: serial: ch341: add new Product ID for CH341A"
Sergey Shtylyov s.shtylyov@omp.ru ata: pata_hpt37x: disable primary channel on HPT371
Christophe JAILLET christophe.jaillet@wanadoo.fr iio: adc: men_z188_adc: Fix a resource leak in an error handling path
Bart Van Assche bvanassche@acm.org RDMA/ib_srp: Fix a deadlock
ChenXiaoSong chenxiaosong2@huawei.com configfs: fix a race in configfs_{,un}register_subsystem()
Gal Pressman gal@nvidia.com net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
Maxime Ripard maxime@cerno.tech drm/edid: Always set RGB444
Paul Blakey paulb@nvidia.com openvswitch: Fix setting ipv6 fields causing hw csum failure
Tao Liu thomas.liu@ucloud.cn gso: do not skip outer ip header in case of ipip and net_failover
Eric Dumazet edumazet@google.com net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends
Xin Long lucien.xin@gmail.com ping: remove pr_err from ping_lookup
Robert Hancock robert.hancock@calian.com serial: 8250: of: Fix mapped region size when using reg-offset property
Oliver Neukum oneukum@suse.com USB: zaurus: support another broken Zaurus
Oliver Neukum oneukum@suse.com sr9700: sanity check for packet length
Helge Deller deller@gmx.de parisc/unaligned: Fix ldw() and stw() unalignment handlers
Helge Deller deller@gmx.de parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel
Stefano Garzarella sgarzare@redhat.com vhost/vsock: don't check owner in vhost_vsock_stop() while releasing
Zhang Qiao zhangqiao22@huawei.com cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug
-------------
Diffstat:
Makefile | 4 +- arch/parisc/kernel/unaligned.c | 14 ++--- drivers/ata/pata_hpt37x.c | 14 +++++ drivers/gpu/drm/drm_edid.c | 2 +- drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c | 37 +++++------ drivers/iio/adc/men_z188_adc.c | 9 ++- drivers/infiniband/ulp/srp/ib_srp.c | 6 +- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 2 +- drivers/net/usb/cdc_ether.c | 12 ++++ drivers/net/usb/sr9700.c | 2 +- drivers/net/usb/zaurus.c | 12 ++++ drivers/tty/n_gsm.c | 4 +- drivers/tty/serial/8250/8250_of.c | 11 +++- drivers/usb/dwc3/gadget.c | 2 + drivers/usb/gadget/function/rndis.c | 8 +++ drivers/usb/gadget/function/rndis.h | 1 + drivers/usb/gadget/udc/udc-xilinx.c | 6 ++ drivers/usb/host/xhci.c | 28 ++++++--- drivers/usb/serial/ch341.c | 1 - drivers/usb/serial/option.c | 12 ++++ drivers/vhost/vsock.c | 21 ++++--- fs/configfs/dir.c | 14 +++++ fs/file.c | 73 +++++++++++++++++----- fs/tracefs/inode.c | 5 +- include/net/checksum.h | 5 ++ kernel/cgroup/cpuset.c | 2 + mm/memblock.c | 10 ++- net/core/skbuff.c | 4 +- net/ipv4/af_inet.c | 5 +- net/ipv4/ping.c | 1 - net/ipv6/ip6_offload.c | 2 + net/openvswitch/actions.c | 46 +++++++++++--- 32 files changed, 287 insertions(+), 88 deletions(-)
From: Zhang Qiao zhangqiao22@huawei.com
commit 05c7b7a92cc87ff8d7fde189d0fade250697573c upstream.
As previously discussed(https://lkml.org/lkml/2022/1/20/51), cpuset_attach() is affected with similar cpu hotplug race, as follow scenario:
cpuset_attach() cpu hotplug --------------------------- ---------------------- down_write(cpuset_rwsem) guarantee_online_cpus() // (load cpus_attach) sched_cpu_deactivate set_cpu_active() // will change cpu_active_mask set_cpus_allowed_ptr(cpus_attach) __set_cpus_allowed_ptr_locked() // (if the intersection of cpus_attach and cpu_active_mask is empty, will return -EINVAL) up_write(cpuset_rwsem)
To avoid races such as described above, protect cpuset_attach() call with cpu_hotplug_lock.
Fixes: be367d099270 ("cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time") Cc: stable@vger.kernel.org # v2.6.32+ Reported-by: Zhao Gongyi zhaogongyi@huawei.com Signed-off-by: Zhang Qiao zhangqiao22@huawei.com Acked-by: Waiman Long longman@redhat.com Reviewed-by: Michal Koutný mkoutny@suse.com Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/cgroup/cpuset.c | 2 ++ 1 file changed, 2 insertions(+)
--- a/kernel/cgroup/cpuset.c +++ b/kernel/cgroup/cpuset.c @@ -1532,6 +1532,7 @@ static void cpuset_attach(struct cgroup_ cgroup_taskset_first(tset, &css); cs = css_cs(css);
+ cpus_read_lock(); mutex_lock(&cpuset_mutex);
/* prepare for attach */ @@ -1587,6 +1588,7 @@ static void cpuset_attach(struct cgroup_ wake_up(&cpuset_attach_wq);
mutex_unlock(&cpuset_mutex); + cpus_read_unlock(); }
/* The various types of files and directories in a cpuset file system */
From: Stefano Garzarella sgarzare@redhat.com
commit a58da53ffd70294ebea8ecd0eb45fd0d74add9f9 upstream.
vhost_vsock_stop() calls vhost_dev_check_owner() to check the device ownership. It expects current->mm to be valid.
vhost_vsock_stop() is also called by vhost_vsock_dev_release() when the user has not done close(), so when we are in do_exit(). In this case current->mm is invalid and we're releasing the device, so we should clean it anyway.
Let's check the owner only when vhost_vsock_stop() is called by an ioctl.
When invoked from release we can not fail so we don't check return code of vhost_vsock_stop(). We need to stop vsock even if it's not the owner.
Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Cc: stable@vger.kernel.org Reported-by: syzbot+1e3ea63db39f2b4440e0@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+3140b17cb44a7b174008@syzkaller.appspotmail.com Signed-off-by: Stefano Garzarella sgarzare@redhat.com Acked-by: Jason Wang jasowang@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/vhost/vsock.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
--- a/drivers/vhost/vsock.c +++ b/drivers/vhost/vsock.c @@ -569,16 +569,18 @@ err: return ret; }
-static int vhost_vsock_stop(struct vhost_vsock *vsock) +static int vhost_vsock_stop(struct vhost_vsock *vsock, bool check_owner) { size_t i; - int ret; + int ret = 0;
mutex_lock(&vsock->dev.mutex);
- ret = vhost_dev_check_owner(&vsock->dev); - if (ret) - goto err; + if (check_owner) { + ret = vhost_dev_check_owner(&vsock->dev); + if (ret) + goto err; + }
for (i = 0; i < ARRAY_SIZE(vsock->vqs); i++) { struct vhost_virtqueue *vq = &vsock->vqs[i]; @@ -692,7 +694,12 @@ static int vhost_vsock_dev_release(struc * inefficient. Room for improvement here. */ vsock_for_each_connected_socket(vhost_vsock_reset_orphans);
- vhost_vsock_stop(vsock); + /* Don't check the owner, because we are in the release path, so we + * need to stop the vsock device in any case. + * vhost_vsock_stop() can not fail in this case, so we don't need to + * check the return code. + */ + vhost_vsock_stop(vsock, false); vhost_vsock_flush(vsock); vhost_dev_stop(&vsock->dev);
@@ -790,7 +797,7 @@ static long vhost_vsock_dev_ioctl(struct if (start) return vhost_vsock_start(vsock); else - return vhost_vsock_stop(vsock); + return vhost_vsock_stop(vsock, true); case VHOST_GET_FEATURES: features = VHOST_VSOCK_FEATURES; if (copy_to_user(argp, &features, sizeof(features)))
From: Helge Deller deller@gmx.de
commit dd2288f4a020d693360e3e8d72f8b9d9c25f5ef6 upstream.
Usually the kernel provides fixup routines to emulate the fldd and fstd floating-point instructions if they load or store 8-byte from/to a not natuarally aligned memory location.
On a 32-bit kernel I noticed that those unaligned handlers didn't worked and instead the application got a SEGV. While checking the code I found two problems:
First, the OPCODE_FLDD_L and OPCODE_FSTD_L cases were ifdef'ed out by the CONFIG_PA20 option, and as such those weren't built on a pure 32-bit kernel. This is now fixed by moving the CONFIG_PA20 #ifdef to prevent the compilation of OPCODE_LDD_L and OPCODE_FSTD_L only, and handling the fldd and fstd instructions.
The second problem are two bugs in the 32-bit inline assembly code, where the wrong registers where used. The calculation of the natural alignment used %2 (vall) instead of %3 (ior), and the first word was stored back to address %1 (valh) instead of %3 (ior).
Signed-off-by: Helge Deller deller@gmx.de Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/parisc/kernel/unaligned.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/parisc/kernel/unaligned.c +++ b/arch/parisc/kernel/unaligned.c @@ -411,7 +411,7 @@ static int emulate_std(struct pt_regs *r __asm__ __volatile__ ( " mtsp %4, %%sr1\n" " zdep %2, 29, 2, %%r19\n" -" dep %%r0, 31, 2, %2\n" +" dep %%r0, 31, 2, %3\n" " mtsar %%r19\n" " zvdepi -2, 32, %%r19\n" "1: ldw 0(%%sr1,%3),%%r20\n" @@ -423,7 +423,7 @@ static int emulate_std(struct pt_regs *r " andcm %%r21, %%r19, %%r21\n" " or %1, %%r20, %1\n" " or %2, %%r21, %2\n" -"3: stw %1,0(%%sr1,%1)\n" +"3: stw %1,0(%%sr1,%3)\n" "4: stw %%r1,4(%%sr1,%3)\n" "5: stw %2,8(%%sr1,%3)\n" " copy %%r0, %0\n" @@ -611,7 +611,6 @@ void handle_unaligned(struct pt_regs *re ret = ERR_NOTHANDLED; /* "undefined", but lets kill them. */ break; } -#ifdef CONFIG_PA20 switch (regs->iir & OPCODE2_MASK) { case OPCODE_FLDD_L: @@ -622,14 +621,15 @@ void handle_unaligned(struct pt_regs *re flop=1; ret = emulate_std(regs, R2(regs->iir),1); break; +#ifdef CONFIG_PA20 case OPCODE_LDD_L: ret = emulate_ldd(regs, R2(regs->iir),0); break; case OPCODE_STD_L: ret = emulate_std(regs, R2(regs->iir),0); break; - } #endif + } switch (regs->iir & OPCODE3_MASK) { case OPCODE_FLDW_L:
From: Helge Deller deller@gmx.de
commit a97279836867b1cb50a3d4f0b1bf60e0abe6d46c upstream.
Fix 3 bugs:
a) emulate_stw() doesn't return the error code value, so faulting instructions are not reported and aborted.
b) Tell emulate_ldw() to handle fldw_l as floating point instruction
c) Tell emulate_ldw() to handle ldw_m as integer instruction
Signed-off-by: Helge Deller deller@gmx.de Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/parisc/kernel/unaligned.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/parisc/kernel/unaligned.c +++ b/arch/parisc/kernel/unaligned.c @@ -354,7 +354,7 @@ static int emulate_stw(struct pt_regs *r : "r" (val), "r" (regs->ior), "r" (regs->isr) : "r19", "r20", "r21", "r22", "r1", FIXUP_BRANCH_CLOBBER );
- return 0; + return ret; } static int emulate_std(struct pt_regs *regs, int frreg, int flop) { @@ -634,10 +634,10 @@ void handle_unaligned(struct pt_regs *re { case OPCODE_FLDW_L: flop=1; - ret = emulate_ldw(regs, R2(regs->iir),0); + ret = emulate_ldw(regs, R2(regs->iir), 1); break; case OPCODE_LDW_M: - ret = emulate_ldw(regs, R2(regs->iir),1); + ret = emulate_ldw(regs, R2(regs->iir), 0); break;
case OPCODE_FSTW_L:
From: Oliver Neukum oneukum@suse.com
commit e9da0b56fe27206b49f39805f7dcda8a89379062 upstream.
A malicious device can leak heap data to user space providing bogus frame lengths. Introduce a sanity check.
Signed-off-by: Oliver Neukum oneukum@suse.com Reviewed-by: Grant Grundler grundler@chromium.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/usb/sr9700.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/usb/sr9700.c +++ b/drivers/net/usb/sr9700.c @@ -410,7 +410,7 @@ static int sr9700_rx_fixup(struct usbnet /* ignore the CRC length */ len = (skb->data[1] | (skb->data[2] << 8)) - 4;
- if (len > ETH_FRAME_LEN) + if (len > ETH_FRAME_LEN || len > skb->len) return 0;
/* the last packet of current skb */
From: Oliver Neukum oneukum@suse.com
commit 6605cc67ca18b9d583eb96e18a20f5f4e726103c upstream.
This SL-6000 says Direct Line, not Ethernet
v2: added Reporter and Link
Signed-off-by: Oliver Neukum oneukum@suse.com Reported-by: Ross Maynard bids.7405@bigpond.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=215361 Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/usb/cdc_ether.c | 12 ++++++++++++ drivers/net/usb/zaurus.c | 12 ++++++++++++ 2 files changed, 24 insertions(+)
--- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -584,6 +584,11 @@ static const struct usb_device_id produc .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ .bInterfaceProtocol = USB_CDC_PROTO_NONE
+#define ZAURUS_FAKE_INTERFACE \ + .bInterfaceClass = USB_CLASS_COMM, \ + .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, \ + .bInterfaceProtocol = USB_CDC_PROTO_NONE + /* SA-1100 based Sharp Zaurus ("collie"), or compatible; * wire-incompatible with true CDC Ethernet implementations. * (And, it seems, needlessly so...) @@ -639,6 +644,13 @@ static const struct usb_device_id produc .driver_info = 0, }, { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x9032, /* SL-6000 */ + ZAURUS_FAKE_INTERFACE, + .driver_info = 0, +}, { + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE, .idVendor = 0x04DD, /* reported with some C860 units */ --- a/drivers/net/usb/zaurus.c +++ b/drivers/net/usb/zaurus.c @@ -268,6 +268,11 @@ static const struct usb_device_id produc .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ .bInterfaceProtocol = USB_CDC_PROTO_NONE
+#define ZAURUS_FAKE_INTERFACE \ + .bInterfaceClass = USB_CLASS_COMM, \ + .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, \ + .bInterfaceProtocol = USB_CDC_PROTO_NONE + /* SA-1100 based Sharp Zaurus ("collie"), or compatible. */ { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO @@ -327,6 +332,13 @@ static const struct usb_device_id produc .driver_info = ZAURUS_PXA_INFO, }, { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x04DD, + .idProduct = 0x9032, /* SL-6000 */ + ZAURUS_FAKE_INTERFACE, + .driver_info = (unsigned long)&bogus_mdlm_info, +}, { + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE, .idVendor = 0x04DD, /* reported with some C860 units */
From: Robert Hancock robert.hancock@calian.com
commit d06b1cf28297e27127d3da54753a3a01a2fa2f28 upstream.
8250_of supports a reg-offset property which is intended to handle cases where the device registers start at an offset inside the region of memory allocated to the device. The Xilinx 16550 UART, for which this support was initially added, requires this. However, the code did not adjust the overall size of the mapped region accordingly, causing the driver to request an area of memory past the end of the device's allocation. For example, if the UART was allocated an address of 0xb0130000, size of 0x10000 and reg-offset of 0x1000 in the device tree, the region of memory reserved was b0131000-b0140fff, which caused the driver for the region starting at b0140000 to fail to probe.
Fix this by subtracting reg-offset from the mapped region size.
Fixes: b912b5e2cfb3 ([POWERPC] Xilinx: of_serial support for Xilinx uart 16550.) Cc: stable stable@vger.kernel.org Signed-off-by: Robert Hancock robert.hancock@calian.com Link: https://lore.kernel.org/r/20220112194214.881844-1-robert.hancock@calian.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org [sudip: adjust context] Signed-off-by: Sudip Mukherjee sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/8250/8250_of.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
--- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -102,8 +102,17 @@ static int of_platform_serial_setup(stru port->mapsize = resource_size(&resource);
/* Check for shifted address mapping */ - if (of_property_read_u32(np, "reg-offset", &prop) == 0) + if (of_property_read_u32(np, "reg-offset", &prop) == 0) { + if (prop >= port->mapsize) { + dev_warn(&ofdev->dev, "reg-offset %u exceeds region size %pa\n", + prop, &port->mapsize); + ret = -EINVAL; + goto err_unprepare; + } + port->mapbase += prop; + port->mapsize -= prop; + }
/* Compatibility with the deprecated pxa driver and 8250_pxa drivers. */ if (of_device_is_compatible(np, "mrvl,mmp-uart"))
From: Xin Long lucien.xin@gmail.com
commit cd33bdcbead882c2e58fdb4a54a7bd75b610a452 upstream.
As Jakub noticed, prints should be avoided on the datapath. Also, as packets would never come to the else branch in ping_lookup(), remove pr_err() from ping_lookup().
Fixes: 35a79e64de29 ("ping: fix the dif and sdif check in ping_lookup") Reported-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Xin Long lucien.xin@gmail.com Link: https://lore.kernel.org/r/1ef3f2fcd31bd681a193b1fcf235eee1603819bd.164567406... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/ping.c | 1 - 1 file changed, 1 deletion(-)
--- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -192,7 +192,6 @@ static struct sock *ping_lookup(struct n (int)ident, &ipv6_hdr(skb)->daddr, dif); #endif } else { - pr_err("ping: protocol(%x) is not supported\n", ntohs(skb->protocol)); return NULL; }
From: Eric Dumazet edumazet@google.com
commit ef527f968ae05c6717c39f49c8709a7e2c19183a upstream.
Whenever one of these functions pull all data from an skb in a frag_list, use consume_skb() instead of kfree_skb() to avoid polluting drop monitoring.
Fixes: 6fa01ccd8830 ("skbuff: Add pskb_extract() helper function") Signed-off-by: Eric Dumazet edumazet@google.com Link: https://lore.kernel.org/r/20220220154052.1308469-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/core/skbuff.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -1974,7 +1974,7 @@ void *__pskb_pull_tail(struct sk_buff *s /* Free pulled out fragments. */ while ((list = skb_shinfo(skb)->frag_list) != insp) { skb_shinfo(skb)->frag_list = list->next; - kfree_skb(list); + consume_skb(list); } /* And insert new clone at head. */ if (clone) { @@ -5408,7 +5408,7 @@ static int pskb_carve_frag_list(struct s /* Free pulled out fragments. */ while ((list = shinfo->frag_list) != insp) { shinfo->frag_list = list->next; - kfree_skb(list); + consume_skb(list); } /* And insert new clone at head. */ if (clone) {
From: Tao Liu thomas.liu@ucloud.cn
commit cc20cced0598d9a5ff91ae4ab147b3b5e99ee819 upstream.
We encounter a tcp drop issue in our cloud environment. Packet GROed in host forwards to a VM virtio_net nic with net_failover enabled. VM acts as a IPVS LB with ipip encapsulation. The full path like: host gro -> vm virtio_net rx -> net_failover rx -> ipvs fullnat -> ipip encap -> net_failover tx -> virtio_net tx
When net_failover transmits a ipip pkt (gso_type = 0x0103, which means SKB_GSO_TCPV4, SKB_GSO_DODGY and SKB_GSO_IPXIP4), there is no gso did because it supports TSO and GSO_IPXIP4. But network_header points to inner ip header.
Call Trace: tcp4_gso_segment ------> return NULL inet_gso_segment ------> inner iph, network_header points to ipip_gso_segment inet_gso_segment ------> outer iph skb_mac_gso_segment
Afterwards virtio_net transmits the pkt, only inner ip header is modified. And the outer one just keeps unchanged. The pkt will be dropped in remote host.
Call Trace: inet_gso_segment ------> inner iph, outer iph is skipped skb_mac_gso_segment __skb_gso_segment validate_xmit_skb validate_xmit_skb_list sch_direct_xmit __qdisc_run __dev_queue_xmit ------> virtio_net dev_hard_start_xmit __dev_queue_xmit ------> net_failover ip_finish_output2 ip_output iptunnel_xmit ip_tunnel_xmit ipip_tunnel_xmit ------> ipip dev_hard_start_xmit __dev_queue_xmit ip_finish_output2 ip_output ip_forward ip_rcv __netif_receive_skb_one_core netif_receive_skb_internal napi_gro_receive receive_buf virtnet_poll net_rx_action
The root cause of this issue is specific with the rare combination of SKB_GSO_DODGY and a tunnel device that adds an SKB_GSO_ tunnel option. SKB_GSO_DODGY is set from external virtio_net. We need to reset network header when callbacks.gso_segment() returns NULL.
This patch also includes ipv6_gso_segment(), considering SIT, etc.
Fixes: cb32f511a70b ("ipip: add GSO/TSO support") Signed-off-by: Tao Liu thomas.liu@ucloud.cn Reviewed-by: Willem de Bruijn willemb@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/af_inet.c | 5 ++++- net/ipv6/ip6_offload.c | 2 ++ 2 files changed, 6 insertions(+), 1 deletion(-)
--- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1268,8 +1268,11 @@ struct sk_buff *inet_gso_segment(struct }
ops = rcu_dereference(inet_offloads[proto]); - if (likely(ops && ops->callbacks.gso_segment)) + if (likely(ops && ops->callbacks.gso_segment)) { segs = ops->callbacks.gso_segment(skb, features); + if (!segs) + skb->network_header = skb_mac_header(skb) + nhoff - skb->head; + }
if (IS_ERR_OR_NULL(segs)) goto out; --- a/net/ipv6/ip6_offload.c +++ b/net/ipv6/ip6_offload.c @@ -96,6 +96,8 @@ static struct sk_buff *ipv6_gso_segment( if (likely(ops && ops->callbacks.gso_segment)) { skb_reset_transport_header(skb); segs = ops->callbacks.gso_segment(skb, features); + if (!segs) + skb->network_header = skb_mac_header(skb) + nhoff - skb->head; }
if (IS_ERR_OR_NULL(segs))
From: Paul Blakey paulb@nvidia.com
commit d9b5ae5c1b241b91480aa30408be12fe91af834a upstream.
Ipv6 ttl, label and tos fields are modified without first pulling/pushing the ipv6 header, which would have updated the hw csum (if available). This might cause csum validation when sending the packet to the stack, as can be seen in the trace below.
Fix this by updating skb->csum if available.
Trace resulted by ipv6 ttl dec and then sending packet to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]: [295241.900063] s_pf0vf2: hw csum failure [295241.923191] Call Trace: [295241.925728] <IRQ> [295241.927836] dump_stack+0x5c/0x80 [295241.931240] __skb_checksum_complete+0xac/0xc0 [295241.935778] nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack] [295241.953030] nf_conntrack_in+0x498/0x5e0 [nf_conntrack] [295241.958344] __ovs_ct_lookup+0xac/0x860 [openvswitch] [295241.968532] ovs_ct_execute+0x4a7/0x7c0 [openvswitch] [295241.979167] do_execute_actions+0x54a/0xaa0 [openvswitch] [295242.001482] ovs_execute_actions+0x48/0x100 [openvswitch] [295242.006966] ovs_dp_process_packet+0x96/0x1d0 [openvswitch] [295242.012626] ovs_vport_receive+0x6c/0xc0 [openvswitch] [295242.028763] netdev_frame_hook+0xc0/0x180 [openvswitch] [295242.034074] __netif_receive_skb_core+0x2ca/0xcb0 [295242.047498] netif_receive_skb_internal+0x3e/0xc0 [295242.052291] napi_gro_receive+0xba/0xe0 [295242.056231] mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core] [295242.062513] mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core] [295242.067669] mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core] [295242.077958] net_rx_action+0x149/0x3b0 [295242.086762] __do_softirq+0xd7/0x2d6 [295242.090427] irq_exit+0xf7/0x100 [295242.093748] do_IRQ+0x7f/0xd0 [295242.096806] common_interrupt+0xf/0xf [295242.100559] </IRQ> [295242.102750] RIP: 0033:0x7f9022e88cbd [295242.125246] RSP: 002b:00007f9022282b20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda [295242.132900] RAX: 0000000000000005 RBX: 0000000000000010 RCX: 0000000000000000 [295242.140120] RDX: 00007f9022282ba8 RSI: 00007f9022282a30 RDI: 00007f9014005c30 [295242.147337] RBP: 00007f9014014d60 R08: 0000000000000020 R09: 00007f90254a8340 [295242.154557] R10: 00007f9022282a28 R11: 0000000000000246 R12: 0000000000000000 [295242.161775] R13: 00007f902308c000 R14: 000000000000002b R15: 00007f9022b71f40
Fixes: 3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action") Signed-off-by: Paul Blakey paulb@nvidia.com Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/net/checksum.h | 5 +++++ net/openvswitch/actions.c | 46 ++++++++++++++++++++++++++++++++++++++-------- 2 files changed, 43 insertions(+), 8 deletions(-)
--- a/include/net/checksum.h +++ b/include/net/checksum.h @@ -143,6 +143,11 @@ static inline void csum_replace2(__sum16 *sum = ~csum16_add(csum16_sub(~(*sum), old), new); }
+static inline void csum_replace(__wsum *csum, __wsum old, __wsum new) +{ + *csum = csum_add(csum_sub(*csum, old), new); +} + struct sk_buff; void inet_proto_csum_replace4(__sum16 *sum, struct sk_buff *skb, __be32 from, __be32 to, bool pseudohdr); --- a/net/openvswitch/actions.c +++ b/net/openvswitch/actions.c @@ -460,12 +460,43 @@ static void set_ipv6_addr(struct sk_buff memcpy(addr, new_addr, sizeof(__be32[4])); }
-static void set_ipv6_fl(struct ipv6hdr *nh, u32 fl, u32 mask) +static void set_ipv6_dsfield(struct sk_buff *skb, struct ipv6hdr *nh, u8 ipv6_tclass, u8 mask) { + u8 old_ipv6_tclass = ipv6_get_dsfield(nh); + + ipv6_tclass = OVS_MASKED(old_ipv6_tclass, ipv6_tclass, mask); + + if (skb->ip_summed == CHECKSUM_COMPLETE) + csum_replace(&skb->csum, (__force __wsum)(old_ipv6_tclass << 12), + (__force __wsum)(ipv6_tclass << 12)); + + ipv6_change_dsfield(nh, ~mask, ipv6_tclass); +} + +static void set_ipv6_fl(struct sk_buff *skb, struct ipv6hdr *nh, u32 fl, u32 mask) +{ + u32 ofl; + + ofl = nh->flow_lbl[0] << 16 | nh->flow_lbl[1] << 8 | nh->flow_lbl[2]; + fl = OVS_MASKED(ofl, fl, mask); + /* Bits 21-24 are always unmasked, so this retains their values. */ - OVS_SET_MASKED(nh->flow_lbl[0], (u8)(fl >> 16), (u8)(mask >> 16)); - OVS_SET_MASKED(nh->flow_lbl[1], (u8)(fl >> 8), (u8)(mask >> 8)); - OVS_SET_MASKED(nh->flow_lbl[2], (u8)fl, (u8)mask); + nh->flow_lbl[0] = (u8)(fl >> 16); + nh->flow_lbl[1] = (u8)(fl >> 8); + nh->flow_lbl[2] = (u8)fl; + + if (skb->ip_summed == CHECKSUM_COMPLETE) + csum_replace(&skb->csum, (__force __wsum)htonl(ofl), (__force __wsum)htonl(fl)); +} + +static void set_ipv6_ttl(struct sk_buff *skb, struct ipv6hdr *nh, u8 new_ttl, u8 mask) +{ + new_ttl = OVS_MASKED(nh->hop_limit, new_ttl, mask); + + if (skb->ip_summed == CHECKSUM_COMPLETE) + csum_replace(&skb->csum, (__force __wsum)(nh->hop_limit << 8), + (__force __wsum)(new_ttl << 8)); + nh->hop_limit = new_ttl; }
static void set_ip_ttl(struct sk_buff *skb, struct iphdr *nh, u8 new_ttl, @@ -583,18 +614,17 @@ static int set_ipv6(struct sk_buff *skb, } } if (mask->ipv6_tclass) { - ipv6_change_dsfield(nh, ~mask->ipv6_tclass, key->ipv6_tclass); + set_ipv6_dsfield(skb, nh, key->ipv6_tclass, mask->ipv6_tclass); flow_key->ip.tos = ipv6_get_dsfield(nh); } if (mask->ipv6_label) { - set_ipv6_fl(nh, ntohl(key->ipv6_label), + set_ipv6_fl(skb, nh, ntohl(key->ipv6_label), ntohl(mask->ipv6_label)); flow_key->ipv6.label = *(__be32 *)nh & htonl(IPV6_FLOWINFO_FLOWLABEL); } if (mask->ipv6_hlimit) { - OVS_SET_MASKED(nh->hop_limit, key->ipv6_hlimit, - mask->ipv6_hlimit); + set_ipv6_ttl(skb, nh, key->ipv6_hlimit, mask->ipv6_hlimit); flow_key->ip.ttl = nh->hop_limit; } return 0;
From: Maxime Ripard maxime@cerno.tech
commit ecbd4912a693b862e25cba0a6990a8c95b00721e upstream.
In order to fill the drm_display_info structure each time an EDID is read, the code currently will call drm_add_display_info with the parsed EDID.
drm_add_display_info will then call drm_reset_display_info to reset all the fields to 0, and then set them to the proper value depending on the EDID.
In the color_formats case, we will thus report that we don't support any color format, and then fill it back with RGB444 plus the additional formats described in the EDID Feature Support byte.
However, since that byte only contains format-related bits since the 1.4 specification, this doesn't happen if the EDID is following an earlier specification. In turn, it means that for one of these EDID, we end up with color_formats set to 0.
The EDID 1.3 specification never really specifies what it means by RGB exactly, but since both HDMI and DVI will use RGB444, it's fairly safe to assume it's supposed to be RGB444.
Let's move the addition of RGB444 to color_formats earlier in drm_add_display_info() so that it's always set for a digital display.
Fixes: da05a5a71ad8 ("drm: parse color format support for digital displays") Cc: Ville Syrjälä ville.syrjala@linux.intel.com Reported-by: Matthias Reichl hias@horus.com Signed-off-by: Maxime Ripard maxime@cerno.tech Reviewed-by: Ville Syrjälä ville.syrjala@linux.intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20220203115416.1137308-1-maxim... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/drm_edid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -4418,6 +4418,7 @@ static void drm_add_display_info(struct if (!(edid->input & DRM_EDID_INPUT_DIGITAL)) return;
+ info->color_formats |= DRM_COLOR_FORMAT_RGB444; drm_parse_cea_ext(connector, edid);
/* @@ -4466,7 +4467,6 @@ static void drm_add_display_info(struct DRM_DEBUG("%s: Assigning EDID-1.4 digital sink color depth as %d bpc.\n", connector->name, info->bpc);
- info->color_formats |= DRM_COLOR_FORMAT_RGB444; if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB444) info->color_formats |= DRM_COLOR_FORMAT_YCRCB444; if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB422)
From: Gal Pressman gal@nvidia.com
commit 0b89429722353d112f8b8b29ca397e95fa994d27 upstream.
The ioctl EEPROM query wrongly returns success on read failures, fix that by returning the appropriate error code.
Fixes: bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM") Signed-off-by: Gal Pressman gal@nvidia.com Reviewed-by: Tariq Toukan tariqt@nvidia.com Signed-off-by: Saeed Mahameed saeedm@nvidia.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -1662,7 +1662,7 @@ static int mlx5e_get_module_eeprom(struc if (size_read < 0) { netdev_err(priv->netdev, "%s: mlx5_query_eeprom failed:0x%x\n", __func__, size_read); - return 0; + return size_read; }
i += size_read;
From: ChenXiaoSong chenxiaosong2@huawei.com
[ Upstream commit 84ec758fb2daa236026506868c8796b0500c047d ]
When configfs_register_subsystem() or configfs_unregister_subsystem() is executing link_group() or unlink_group(), it is possible that two processes add or delete list concurrently. Some unfortunate interleavings of them can cause kernel panic.
One of cases is: A --> B --> C --> D A <-- B <-- C <-- D
delete list_head *B | delete list_head *C --------------------------------|----------------------------------- configfs_unregister_subsystem | configfs_unregister_subsystem unlink_group | unlink_group unlink_obj | unlink_obj list_del_init | list_del_init __list_del_entry | __list_del_entry __list_del | __list_del // next == C | next->prev = prev | | next->prev = prev prev->next = next | | // prev == B | prev->next = next
Fix this by adding mutex when calling link_group() or unlink_group(), but parent configfs_subsystem is NULL when config_item is root. So I create a mutex configfs_subsystem_mutex.
Fixes: 7063fbf22611 ("[PATCH] configfs: User-driven configuration filesystem") Signed-off-by: ChenXiaoSong chenxiaosong2@huawei.com Signed-off-by: Laibin Qiu qiulaibin@huawei.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- fs/configfs/dir.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index c875f246cb0e9..ccb49caed502c 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -50,6 +50,14 @@ DECLARE_RWSEM(configfs_rename_sem); */ DEFINE_SPINLOCK(configfs_dirent_lock);
+/* + * All of link_obj/unlink_obj/link_group/unlink_group require that + * subsys->su_mutex is held. + * But parent configfs_subsystem is NULL when config_item is root. + * Use this mutex when config_item is root. + */ +static DEFINE_MUTEX(configfs_subsystem_mutex); + static void configfs_d_iput(struct dentry * dentry, struct inode * inode) { @@ -1937,7 +1945,9 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys) group->cg_item.ci_name = group->cg_item.ci_namebuf;
sd = root->d_fsdata; + mutex_lock(&configfs_subsystem_mutex); link_group(to_config_group(sd->s_element), group); + mutex_unlock(&configfs_subsystem_mutex);
inode_lock_nested(d_inode(root), I_MUTEX_PARENT);
@@ -1962,7 +1972,9 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys) inode_unlock(d_inode(root));
if (err) { + mutex_lock(&configfs_subsystem_mutex); unlink_group(group); + mutex_unlock(&configfs_subsystem_mutex); configfs_release_fs(); } put_fragment(frag); @@ -2008,7 +2020,9 @@ void configfs_unregister_subsystem(struct configfs_subsystem *subsys)
dput(dentry);
+ mutex_lock(&configfs_subsystem_mutex); unlink_group(group); + mutex_unlock(&configfs_subsystem_mutex); configfs_release_fs(); }
From: Bart Van Assche bvanassche@acm.org
[ Upstream commit 081bdc9fe05bb23248f5effb6f811da3da4b8252 ]
Remove the flush_workqueue(system_long_wq) call since flushing system_long_wq is deadlock-prone and since that call is redundant with a preceding cancel_work_sync()
Link: https://lore.kernel.org/r/20220215210511.28303-3-bvanassche@acm.org Fixes: ef6c49d87c34 ("IB/srp: Eliminate state SRP_TARGET_DEAD") Reported-by: syzbot+831661966588c802aae9@syzkaller.appspotmail.com Signed-off-by: Bart Van Assche bvanassche@acm.org Reviewed-by: Leon Romanovsky leonro@nvidia.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/ulp/srp/ib_srp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 9f7287f45d06f..63358c4c8e57c 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -3683,9 +3683,11 @@ static void srp_remove_one(struct ib_device *device, void *client_data) spin_unlock(&host->target_lock);
/* - * Wait for tl_err and target port removal tasks. + * srp_queue_remove_work() queues a call to + * srp_remove_target(). The latter function cancels + * target->tl_err_work so waiting for the remove works to + * finish is sufficient. */ - flush_workqueue(system_long_wq); flush_workqueue(srp_remove_wq);
kfree(host);
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
commit e0a2e37f303828d030a83f33ffe14b36cb88d563 upstream.
If iio_device_register() fails, a previous ioremap() is left unbalanced.
Update the error handling path and add the missing iounmap() call, as already done in the remove function.
Fixes: 74aeac4da66f ("iio: adc: Add MEN 16z188 ADC driver") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Link: https://lore.kernel.org/r/320fc777863880247c2aff4a9d1a54ba69abf080.164344514... Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/adc/men_z188_adc.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/iio/adc/men_z188_adc.c +++ b/drivers/iio/adc/men_z188_adc.c @@ -107,6 +107,7 @@ static int men_z188_probe(struct mcb_dev struct z188_adc *adc; struct iio_dev *indio_dev; struct resource *mem; + int ret;
indio_dev = devm_iio_device_alloc(&dev->dev, sizeof(struct z188_adc)); if (!indio_dev) @@ -133,8 +134,14 @@ static int men_z188_probe(struct mcb_dev adc->mem = mem; mcb_set_drvdata(dev, indio_dev);
- return iio_device_register(indio_dev); + ret = iio_device_register(indio_dev); + if (ret) + goto err_unmap;
+ return 0; + +err_unmap: + iounmap(adc->base); err: mcb_release_mem(mem); return -ENXIO;
From: Sergey Shtylyov s.shtylyov@omp.ru
commit 8d093e02e898b24c58788b0289e3202317a96d2a upstream.
The HPT371 chip physically has only one channel, the secondary one, however the primary channel registers do exist! Thus we have to manually disable the non-existing channel if the BIOS hasn't done this already. Similarly to the pata_hpt3x2n driver, always disable the primary channel.
Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.") Cc: stable@vger.kernel.org Signed-off-by: Sergey Shtylyov s.shtylyov@omp.ru Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ata/pata_hpt37x.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
--- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -920,6 +920,20 @@ static int hpt37x_init_one(struct pci_de pci_write_config_byte(dev, 0x5a, irqmask);
/* + * HPT371 chips physically have only one channel, the secondary one, + * but the primary channel registers do exist! Go figure... + * So, we manually disable the non-existing channel here + * (if the BIOS hasn't done this already). + */ + if (dev->device == PCI_DEVICE_ID_TTI_HPT371) { + u8 mcr1; + + pci_read_config_byte(dev, 0x50, &mcr1); + mcr1 &= ~0x04; + pci_write_config_byte(dev, 0x50, mcr1); + } + + /* * default to pci clock. make sure MA15/16 are set to output * to prevent drives having problems with 40-pin cables. Needed * for some drives such as IBM-DTLA which will not enter ready
From: Dmytro Bagrii dimich.dmb@gmail.com
commit 198a7ebd5fa17b4d0be8cb70240ee1be885175c0 upstream.
This reverts commit 46ee4abb10a07bd8f8ce910ee6b4ae6a947d7f63.
CH341 has Product ID 0x5512 in EPP/MEM mode which is used for I2C/SPI/GPIO interfaces. In asynchronous serial interface mode CH341 has PID 0x5523 which is already in the table.
Mode is selected by corresponding jumper setting.
Signed-off-by: Dmytro Bagrii dimich.dmb@gmail.com Link: https://lore.kernel.org/r/20220210164137.4376-1-dimich.dmb@gmail.com Link: https://lore.kernel.org/r/YJ0OCS/sh+1ifD/q@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/ch341.c | 1 - 1 file changed, 1 deletion(-)
--- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -83,7 +83,6 @@ #define CH341_LCR_CS5 0x00
static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x1a86, 0x5512) }, { USB_DEVICE(0x1a86, 0x5523) }, { USB_DEVICE(0x1a86, 0x7522) }, { USB_DEVICE(0x1a86, 0x7523) },
From: Daehwan Jung dh10.jung@samsung.com
commit aaaba1c86d04dac8e49bf508b492f81506257da3 upstream.
There's no lock for rndis response list. It could cause list corruption if there're two different list_add at the same time like below. It's better to add in rndis_add_response / rndis_free_response / rndis_get_next_response to prevent any race condition on response list.
[ 361.894299] [1: irq/191-dwc3:16979] list_add corruption. next->prev should be prev (ffffff80651764d0), but was ffffff883dc36f80. (next=ffffff80651764d0).
[ 361.904380] [1: irq/191-dwc3:16979] Call trace: [ 361.904391] [1: irq/191-dwc3:16979] __list_add_valid+0x74/0x90 [ 361.904401] [1: irq/191-dwc3:16979] rndis_msg_parser+0x168/0x8c0 [ 361.904409] [1: irq/191-dwc3:16979] rndis_command_complete+0x24/0x84 [ 361.904417] [1: irq/191-dwc3:16979] usb_gadget_giveback_request+0x20/0xe4 [ 361.904426] [1: irq/191-dwc3:16979] dwc3_gadget_giveback+0x44/0x60 [ 361.904434] [1: irq/191-dwc3:16979] dwc3_ep0_complete_data+0x1e8/0x3a0 [ 361.904442] [1: irq/191-dwc3:16979] dwc3_ep0_interrupt+0x29c/0x3dc [ 361.904450] [1: irq/191-dwc3:16979] dwc3_process_event_entry+0x78/0x6cc [ 361.904457] [1: irq/191-dwc3:16979] dwc3_process_event_buf+0xa0/0x1ec [ 361.904465] [1: irq/191-dwc3:16979] dwc3_thread_interrupt+0x34/0x5c
Fixes: f6281af9d62e ("usb: gadget: rndis: use list_for_each_entry_safe") Cc: stable stable@kernel.org Signed-off-by: Daehwan Jung dh10.jung@samsung.com Link: https://lore.kernel.org/r/1645507768-77687-1-git-send-email-dh10.jung@samsun... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/gadget/function/rndis.c | 8 ++++++++ drivers/usb/gadget/function/rndis.h | 1 + 2 files changed, 9 insertions(+)
--- a/drivers/usb/gadget/function/rndis.c +++ b/drivers/usb/gadget/function/rndis.c @@ -922,6 +922,7 @@ struct rndis_params *rndis_register(void params->resp_avail = resp_avail; params->v = v; INIT_LIST_HEAD(¶ms->resp_queue); + spin_lock_init(¶ms->resp_lock); pr_debug("%s: configNr = %d\n", __func__, i);
return params; @@ -1015,12 +1016,14 @@ void rndis_free_response(struct rndis_pa { rndis_resp_t *r, *n;
+ spin_lock(¶ms->resp_lock); list_for_each_entry_safe(r, n, ¶ms->resp_queue, list) { if (r->buf == buf) { list_del(&r->list); kfree(r); } } + spin_unlock(¶ms->resp_lock); } EXPORT_SYMBOL_GPL(rndis_free_response);
@@ -1030,14 +1033,17 @@ u8 *rndis_get_next_response(struct rndis
if (!length) return NULL;
+ spin_lock(¶ms->resp_lock); list_for_each_entry_safe(r, n, ¶ms->resp_queue, list) { if (!r->send) { r->send = 1; *length = r->length; + spin_unlock(¶ms->resp_lock); return r->buf; } }
+ spin_unlock(¶ms->resp_lock); return NULL; } EXPORT_SYMBOL_GPL(rndis_get_next_response); @@ -1054,7 +1060,9 @@ static rndis_resp_t *rndis_add_response( r->length = length; r->send = 0;
+ spin_lock(¶ms->resp_lock); list_add_tail(&r->list, ¶ms->resp_queue); + spin_unlock(¶ms->resp_lock); return r; }
--- a/drivers/usb/gadget/function/rndis.h +++ b/drivers/usb/gadget/function/rndis.h @@ -177,6 +177,7 @@ typedef struct rndis_params { void (*resp_avail)(void *v); void *v; struct list_head resp_queue; + spinlock_t resp_lock; } rndis_params;
/* RNDIS Message parser and other useless functions */
From: Szymon Heidrich szymon.heidrich@gmail.com
commit 7f14c7227f342d9932f9b918893c8814f86d2a0d upstream.
Assure that host may not manipulate the index to point past endpoint array.
Signed-off-by: Szymon Heidrich szymon.heidrich@gmail.com Cc: stable stable@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/gadget/udc/udc-xilinx.c | 6 ++++++ 1 file changed, 6 insertions(+)
--- a/drivers/usb/gadget/udc/udc-xilinx.c +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -1620,6 +1620,8 @@ static void xudc_getstatus(struct xusb_u break; case USB_RECIP_ENDPOINT: epnum = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK; + if (epnum >= XUSB_MAX_ENDPOINTS) + goto stall; target_ep = &udc->ep[epnum]; epcfgreg = udc->read_fn(udc->addr + target_ep->offset); halt = epcfgreg & XUSB_EP_CFG_STALL_MASK; @@ -1687,6 +1689,10 @@ static void xudc_set_clear_feature(struc case USB_RECIP_ENDPOINT: if (!udc->setup.wValue) { endpoint = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK; + if (endpoint >= XUSB_MAX_ENDPOINTS) { + xudc_ep0_stall(udc); + return; + } target_ep = &udc->ep[endpoint]; outinbit = udc->setup.wIndex & USB_ENDPOINT_DIR_MASK; outinbit = outinbit >> 7;
From: Steven Rostedt (Google) rostedt@goodmis.org
commit 851e99ebeec3f4a672bb5010cf1ece095acee447 upstream.
Al Viro brought it to my attention that the dentries may not be filled when the parse_options() is called, causing the call to set_gid() to possibly crash. It should only be called if parse_options() succeeds totally anyway.
He suggested the logical place to do the update is in apply_options().
Link: https://lore.kernel.org/all/20220225165219.737025658@goodmis.org/ Link: https://lkml.kernel.org/r/20220225153426.1c4cab6b@gandalf.local.home
Cc: stable@vger.kernel.org Acked-by: Al Viro viro@zeniv.linux.org.uk Reported-by: Al Viro viro@zeniv.linux.org.uk Fixes: 48b27b6b5191 ("tracefs: Set all files to the same group ownership as the mount option") Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/tracefs/inode.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
--- a/fs/tracefs/inode.c +++ b/fs/tracefs/inode.c @@ -265,7 +265,6 @@ static int tracefs_parse_options(char *d if (!gid_valid(gid)) return -EINVAL; opts->gid = gid; - set_gid(tracefs_mount->mnt_root, gid); break; case Opt_mode: if (match_octal(&args[0], &option)) @@ -292,7 +291,9 @@ static int tracefs_apply_options(struct inode->i_mode |= opts->mode;
inode->i_uid = opts->uid; - inode->i_gid = opts->gid; + + /* Set all the group ids to the mount option */ + set_gid(sb->s_root, opts->gid);
return 0; }
From: Slark Xiao slark_xiao@163.com
commit 6ecb3f0b18b320320460a42e40d6fb603f6ded96 upstream.
Dell DW5829e same as DW5821e except CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. There are 2 types product of DW5829e: normal and eSIM. So we will add 2 PID for DW5829e. And for each PID, it support MBIM or RMNET. Let's see test evidence as below:
DW5829e MBIM mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
DW5829e RMNET mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
DW5829e-eSIM MBIM mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
DW5829e-eSIM RMNET mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
BTW, the interface 0x6 of MBIM mode is GNSS port, which not same as NMEA port. So it's banned from serial option driver. The remaining interfaces 0x2-0x5 are: MODEM, MODEM, NMEA, DIAG.
Signed-off-by: Slark Xiao slark_xiao@163.com Link: https://lore.kernel.org/r/20220214021401.6264-1-slark_xiao@163.com [ johan: drop unnecessary reservation of interface 1 ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+)
--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -201,6 +201,8 @@ static void option_instat_callback(struc
#define DELL_PRODUCT_5821E 0x81d7 #define DELL_PRODUCT_5821E_ESIM 0x81e0 +#define DELL_PRODUCT_5829E_ESIM 0x81e4 +#define DELL_PRODUCT_5829E 0x81e6
#define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da @@ -1066,6 +1068,10 @@ static const struct usb_device_id option .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E_ESIM), .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5829E), + .driver_info = RSVD(0) | RSVD(6) }, + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5829E_ESIM), + .driver_info = RSVD(0) | RSVD(6) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
From: Daniele Palmas dnlplm@gmail.com
commit cfc4442c642d568014474b6718ccf65dc7ca6099 upstream.
Add support for the following Telit LE910R1 compositions:
0x701a: rndis, tty, tty, tty 0x701b: ecm, tty, tty, tty 0x9201: tty
Signed-off-by: Daniele Palmas dnlplm@gmail.com Link: https://lore.kernel.org/r/20220218134552.4051-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+)
--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1282,10 +1282,16 @@ static const struct usb_device_id option .driver_info = NCTRL(2) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7011, 0xff), /* Telit LE910-S1 (ECM) */ .driver_info = NCTRL(2) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701a, 0xff), /* Telit LE910R1 (RNDIS) */ + .driver_info = NCTRL(2) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701b, 0xff), /* Telit LE910R1 (ECM) */ + .driver_info = NCTRL(2) }, { USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */ .driver_info = NCTRL(0) | ZLP }, { USB_DEVICE(TELIT_VENDOR_ID, 0x9200), /* Telit LE910S1 flashing device */ .driver_info = NCTRL(0) | ZLP }, + { USB_DEVICE(TELIT_VENDOR_ID, 0x9201), /* Telit LE910R1 flashing device */ + .driver_info = NCTRL(0) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff), .driver_info = RSVD(1) },
From: Sebastian Andrzej Siewior bigeasy@linutronix.de
commit 84918a89d6efaff075de570b55642b6f4ceeac6d upstream.
The interrupt service routine registered for the gadget is a primary handler which mask the interrupt source and a threaded handler which handles the source of the interrupt. Since the threaded handler is voluntary threaded, the IRQ-core does not disable bottom halves before invoke the handler like it does for the forced-threaded handler.
Due to changes in networking it became visible that a network gadget's completions handler may schedule a softirq which remains unprocessed. The gadget's completion handler is usually invoked either in hard-IRQ or soft-IRQ context. In this context it is enough to just raise the softirq because the softirq itself will be handled once that context is left. In the case of the voluntary threaded handler, there is nothing that will process pending softirqs. Which means it remain queued until another random interrupt (on this CPU) fires and handles it on its exit path or another thread locks and unlocks a lock with the bh suffix. Worst case is that the CPU goes idle and the NOHZ complains about unhandled softirqs.
Disable bottom halves before acquiring the lock (and disabling interrupts) and enable them after dropping the lock. This ensures that any pending softirqs will handled right away.
Link: https://lkml.kernel.org/r/c2a64979-73d1-2c22-e048-c275c9f81558@samsung.com Fixes: e5f68b4a3e7b0 ("Revert "usb: dwc3: gadget: remove unnecessary _irqsave()"") Cc: stable stable@kernel.org Reported-by: Marek Szyprowski m.szyprowski@samsung.com Tested-by: Marek Szyprowski m.szyprowski@samsung.com Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Link: https://lore.kernel.org/r/Yg/YPejVQH3KkRVd@linutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/dwc3/gadget.c | 2 ++ 1 file changed, 2 insertions(+)
--- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3153,9 +3153,11 @@ static irqreturn_t dwc3_thread_interrupt unsigned long flags; irqreturn_t ret = IRQ_NONE;
+ local_bh_disable(); spin_lock_irqsave(&dwc->lock, flags); ret = dwc3_process_event_buf(evt); spin_unlock_irqrestore(&dwc->lock, flags); + local_bh_enable();
return ret; }
From: Puma Hsu pumahsu@google.com
commit 8b328f8002bcf29ef517ee4bf234e09aabec4d2e upstream.
When HCE(Host Controller Error) is set, it means an internal error condition has been detected. Software needs to re-initialize the HC, so add this check in xhci resume.
Cc: stable@vger.kernel.org Signed-off-by: Puma Hsu pumahsu@google.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20220215123320.1253947-2-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-)
--- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1022,6 +1022,7 @@ int xhci_resume(struct xhci_hcd *xhci, b int retval = 0; bool comp_timer_running = false; bool pending_portevent = false; + bool reinit_xhc = false;
if (!hcd->state) return 0; @@ -1038,10 +1039,11 @@ int xhci_resume(struct xhci_hcd *xhci, b set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
spin_lock_irq(&xhci->lock); - if ((xhci->quirks & XHCI_RESET_ON_RESUME) || xhci->broken_suspend) - hibernated = true;
- if (!hibernated) { + if (hibernated || xhci->quirks & XHCI_RESET_ON_RESUME || xhci->broken_suspend) + reinit_xhc = true; + + if (!reinit_xhc) { /* * Some controllers might lose power during suspend, so wait * for controller not ready bit to clear, just as in xHC init. @@ -1074,12 +1076,17 @@ int xhci_resume(struct xhci_hcd *xhci, b spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; } - temp = readl(&xhci->op_regs->status); }
- /* If restore operation fails, re-initialize the HC during resume */ - if ((temp & STS_SRE) || hibernated) { + temp = readl(&xhci->op_regs->status); + + /* re-initialize the HC on Restore Error, or Host Controller Error */ + if (temp & (STS_SRE | STS_HCE)) { + reinit_xhc = true; + xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp); + }
+ if (reinit_xhc) { if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !(xhci_all_ports_seen_u0(xhci))) { del_timer_sync(&xhci->comp_mode_recovery_timer);
From: Hongyu Xie xiehongyu1@kylinos.cn
commit 243a1dd7ba48c120986dd9e66fee74bcb7751034 upstream.
The -ENODEV return value from xhci_check_args() is incorrectly changed to -EINVAL in a couple places before propagated further.
xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0. xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if the return value of xhci_check_args <= 0. This causes problems for example r8152_submit_rx, calling usb_submit_urb in drivers/net/usb/r8152.c. r8152_submit_rx will never get -ENODEV after submiting an urb when xHC is halted because xhci_urb_enqueue returns -EINVAL in the very beginning.
[commit message and header edit -Mathias]
Fixes: 203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.") Cc: stable@vger.kernel.org Signed-off-by: Hongyu Xie xiehongyu1@kylinos.cn Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20220215123320.1253947-3-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1397,9 +1397,12 @@ static int xhci_urb_enqueue(struct usb_h struct urb_priv *urb_priv; int num_tds;
- if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, - true, true, __func__) <= 0) + if (!urb) return -EINVAL; + ret = xhci_check_args(hcd, urb->dev, urb->ep, + true, true, __func__); + if (ret <= 0) + return ret ? ret : -EINVAL;
slot_id = urb->dev->slot_id; ep_index = xhci_get_endpoint_index(&urb->ep->desc); @@ -3026,7 +3029,7 @@ static int xhci_check_streams_endpoint(s return -EINVAL; ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, true, __func__); if (ret <= 0) - return -EINVAL; + return ret ? ret : -EINVAL; if (usb_ss_max_streams(&ep->ss_ep_comp) == 0) { xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion" " descriptor for ep 0x%x does not support streams\n",
From: daniel.starke@siemens.com daniel.starke@siemens.com
commit 737b0ef3be6b319d6c1fd64193d1603311969326 upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.a... The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.3.7 describes the encoding of the control signal octet used by the MSC (modem status command). The same encoding is also used in convergence layer type 2 as described in chapter 5.5.2. Table 7 and 24 both require the DV (data valid) bit to be set 1 for outgoing control signal octets sent by the DTE (data terminal equipment), i.e. for the initiator side. Currently, the DV bit is only set if CD (carrier detect) is on, regardless of the side.
This patch fixes this behavior by setting the DV bit on the initiator side unconditionally.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke daniel.starke@siemens.com Link: https://lore.kernel.org/r/20220218073123.2121-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/n_gsm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -440,7 +440,7 @@ static u8 gsm_encode_modem(const struct modembits |= MDM_RTR; if (dlci->modem_tx & TIOCM_RI) modembits |= MDM_IC; - if (dlci->modem_tx & TIOCM_CD) + if (dlci->modem_tx & TIOCM_CD || dlci->gsm->initiator) modembits |= MDM_DV; return modembits; }
From: daniel.starke@siemens.com daniel.starke@siemens.com
commit e3b7468f082d106459e86e8dc6fb9bdd65553433 upstream.
Trying to open a DLCI by sending a SABM frame may fail with a timeout. The link is closed on the initiator side without informing the responder about this event. The responder assumes the link is open after sending a UA frame to answer the SABM frame. The link gets stuck in a half open state.
This patch fixes this by initiating the proper link termination procedure after link setup timeout instead of silently closing it down.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke daniel.starke@siemens.com Link: https://lore.kernel.org/r/20220218073123.2121-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/n_gsm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1502,7 +1502,7 @@ static void gsm_dlci_t1(unsigned long da dlci->mode = DLCI_MODE_ADM; gsm_dlci_open(dlci); } else { - gsm_dlci_close(dlci); + gsm_dlci_begin_close(dlci); /* prevent half open link */ }
break;
From: Karol Herbst kherbst@redhat.com
This reverts commit c9ec3d85c0eef7c71cdc68db758e0f0e378132c0.
This commit causes a regression if 4cdd2450bf739bada353e82d27b00db9af8c3001 is not applied as well. This was fixed for 5.16, 5.15 and 5.10.
On older stable branches backporting this commit is complicated as relevant code changed quite a bit. Furthermore most of the affected hardware barely works on those and users would want to use the newer kernels anyway.
Cc: stable@vger.kernel.org # 5.4 4.19 and 4.14 Cc: Ben Skeggs bskeggs@redhat.com Cc: Lyude Paul lyude@redhat.com Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/149 Signed-off-by: Karol Herbst kherbst@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c | 37 ++++++++++--------------- 1 file changed, 16 insertions(+), 21 deletions(-)
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c @@ -70,13 +70,20 @@ nvkm_pmu_fini(struct nvkm_subdev *subdev return 0; }
-static void +static int nvkm_pmu_reset(struct nvkm_pmu *pmu) { struct nvkm_device *device = pmu->subdev.device;
if (!pmu->func->enabled(pmu)) - return; + return 0; + + /* Inhibit interrupts, and wait for idle. */ + nvkm_wr32(device, 0x10a014, 0x0000ffff); + nvkm_msec(device, 2000, + if (!nvkm_rd32(device, 0x10a04c)) + break; + );
/* Reset. */ if (pmu->func->reset) @@ -87,37 +94,25 @@ nvkm_pmu_reset(struct nvkm_pmu *pmu) if (!(nvkm_rd32(device, 0x10a10c) & 0x00000006)) break; ); + + return 0; }
static int nvkm_pmu_preinit(struct nvkm_subdev *subdev) { struct nvkm_pmu *pmu = nvkm_pmu(subdev); - nvkm_pmu_reset(pmu); - return 0; + return nvkm_pmu_reset(pmu); }
static int nvkm_pmu_init(struct nvkm_subdev *subdev) { struct nvkm_pmu *pmu = nvkm_pmu(subdev); - struct nvkm_device *device = pmu->subdev.device; - - if (!pmu->func->init) - return 0; - - if (pmu->func->enabled(pmu)) { - /* Inhibit interrupts, and wait for idle. */ - nvkm_wr32(device, 0x10a014, 0x0000ffff); - nvkm_msec(device, 2000, - if (!nvkm_rd32(device, 0x10a04c)) - break; - ); - - nvkm_pmu_reset(pmu); - } - - return pmu->func->init(pmu); + int ret = nvkm_pmu_reset(pmu); + if (ret == 0 && pmu->func->init) + ret = pmu->func->init(pmu); + return ret; }
static int
From: Miaohe Lin linmiaohe@huawei.com
commit c94afc46cae7ad41b2ad6a99368147879f4b0e56 upstream.
memblock.{reserved,memory}.regions may be allocated using kmalloc() in memblock_double_array(). Use kfree() to release these kmalloced regions indicated by memblock_{reserved,memory}_in_slab.
Signed-off-by: Miaohe Lin linmiaohe@huawei.com Fixes: 3010f876500f ("mm: discard memblock data later") Signed-off-by: Mike Rapoport rppt@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/memblock.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
--- a/mm/memblock.c +++ b/mm/memblock.c @@ -260,14 +260,20 @@ void __init memblock_discard(void) addr = __pa(memblock.reserved.regions); size = PAGE_ALIGN(sizeof(struct memblock_region) * memblock.reserved.max); - __memblock_free_late(addr, size); + if (memblock_reserved_in_slab) + kfree(memblock.reserved.regions); + else + __memblock_free_late(addr, size); }
if (memblock.memory.regions != memblock_memory_init_regions) { addr = __pa(memblock.memory.regions); size = PAGE_ALIGN(sizeof(struct memblock_region) * memblock.memory.max); - __memblock_free_late(addr, size); + if (memblock_memory_in_slab) + kfree(memblock.memory.regions); + else + __memblock_free_late(addr, size); } } #endif
From: Linus Torvalds torvalds@linux-foundation.org
commit e386dfc56f837da66d00a078e5314bc8382fab83 upstream.
Commit 054aa8d439b9 ("fget: check that the fd still exists after getting a ref to it") fixed a race with getting a reference to a file just as it was being closed. It was a fairly minimal patch, and I didn't think re-checking the file pointer lookup would be a measurable overhead, since it was all right there and cached.
But I was wrong, as pointed out by the kernel test robot.
The 'poll2' case of the will-it-scale.per_thread_ops benchmark regressed quite noticeably. Admittedly it seems to be a very artificial test: doing "poll()" system calls on regular files in a very tight loop in multiple threads.
That means that basically all the time is spent just looking up file descriptors without ever doing anything useful with them (not that doing 'poll()' on a regular file is useful to begin with). And as a result it shows the extra "re-check fd" cost as a sore thumb.
Happily, the regression is fixable by just writing the code to loook up the fd to be better and clearer. There's still a cost to verify the file pointer, but now it's basically in the noise even for that benchmark that does nothing else - and the code is more understandable and has better comments too.
[ Side note: this patch is also a classic case of one that looks very messy with the default greedy Myers diff - it's much more legible with either the patience of histogram diff algorithm ]
Link: https://lore.kernel.org/lkml/20211210053743.GA36420@xsang-OptiPlex-9020/ Link: https://lore.kernel.org/lkml/20211213083154.GA20853@linux.intel.com/ Reported-by: kernel test robot oliver.sang@intel.com Tested-by: Carel Si beibei.si@intel.com Cc: Jann Horn jannh@google.com Cc: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Baokun Li libaokun1@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/file.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 57 insertions(+), 16 deletions(-)
--- a/fs/file.c +++ b/fs/file.c @@ -679,28 +679,69 @@ void do_close_on_exec(struct files_struc spin_unlock(&files->file_lock); }
-static struct file *__fget(unsigned int fd, fmode_t mask, unsigned int refs) +static inline struct file *__fget_files_rcu(struct files_struct *files, + unsigned int fd, fmode_t mask, unsigned int refs) { - struct files_struct *files = current->files; - struct file *file; + for (;;) { + struct file *file; + struct fdtable *fdt = rcu_dereference_raw(files->fdt); + struct file __rcu **fdentry;
- rcu_read_lock(); -loop: - file = fcheck_files(files, fd); - if (file) { - /* File object ref couldn't be taken. - * dup2() atomicity guarantee is the reason - * we loop to catch the new file (or NULL pointer) + if (unlikely(fd >= fdt->max_fds)) + return NULL; + + fdentry = fdt->fd + array_index_nospec(fd, fdt->max_fds); + file = rcu_dereference_raw(*fdentry); + if (unlikely(!file)) + return NULL; + + if (unlikely(file->f_mode & mask)) + return NULL; + + /* + * Ok, we have a file pointer. However, because we do + * this all locklessly under RCU, we may be racing with + * that file being closed. + * + * Such a race can take two forms: + * + * (a) the file ref already went down to zero, + * and get_file_rcu_many() fails. Just try + * again: */ - if (file->f_mode & mask) - file = NULL; - else if (!get_file_rcu_many(file, refs)) - goto loop; - else if (__fcheck_files(files, fd) != file) { + if (unlikely(!get_file_rcu_many(file, refs))) + continue; + + /* + * (b) the file table entry has changed under us. + * Note that we don't need to re-check the 'fdt->fd' + * pointer having changed, because it always goes + * hand-in-hand with 'fdt'. + * + * If so, we need to put our refs and try again. + */ + if (unlikely(rcu_dereference_raw(files->fdt) != fdt) || + unlikely(rcu_dereference_raw(*fdentry) != file)) { fput_many(file, refs); - goto loop; + continue; } + + /* + * Ok, we have a ref to the file, and checked that it + * still exists. + */ + return file; } +} + + +static struct file *__fget(unsigned int fd, fmode_t mask, unsigned int refs) +{ + struct files_struct *files = current->files; + struct file *file; + + rcu_read_lock(); + file = __fget_files_rcu(files, fd, mask, refs); rcu_read_unlock();
return file;
On Mon, 28 Feb 2022 18:23:56 +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.14.269 release. There are 31 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.269-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y and the diffstat can be found below.
thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v4.14: 8 builds: 8 pass, 0 fail 16 boots: 16 pass, 0 fail 32 tests: 32 pass, 0 fail
Linux version: 4.14.269-rc1-g43ab82ea0bf0 Boards tested: tegra124-jetson-tk1, tegra20-ventana, tegra210-p2371-2180, tegra30-cardhu-a04
Tested-by: Jon Hunter jonathanh@nvidia.com
Jon
On Mon, 28 Feb 2022 at 22:58, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 4.14.269 release. There are 31 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.269-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing lkft@linaro.org
## Build * kernel: 4.14.269-rc1 * git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git * git branch: linux-4.14.y * git commit: 43ab82ea0bf0a7b6afb31831af7cefaa3e21c9d6 * git describe: v4.14.268-32-g43ab82ea0bf0 * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14....
## Test Regressions (compared to v4.14.268) No test regressions found.
## Metric Regressions (compared to v4.14.268) No metric regressions found.
## Test Fixes (compared to v4.14.268) No test fixes found.
## Metric Fixes (compared to v4.14.268) No metric fixes found.
## Test result summary total: 79045, pass: 65997, fail: 354, skip: 11390, xfail: 1304
## Build Summary * arm: 280 total, 270 passed, 10 failed * arm64: 35 total, 35 passed, 0 failed * dragonboard-410c: 1 total, 1 passed, 0 failed * hi6220-hikey: 1 total, 1 passed, 0 failed * i386: 19 total, 19 passed, 0 failed * juno-r2: 1 total, 1 passed, 0 failed * mips: 22 total, 22 passed, 0 failed * powerpc: 60 total, 12 passed, 48 failed * sparc: 12 total, 12 passed, 0 failed * x15: 1 total, 1 passed, 0 failed * x86: 1 total, 1 passed, 0 failed * x86_64: 34 total, 34 passed, 0 failed
## Test suites summary * fwts * kselftest-android * kselftest-bpf * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-efivarfs * kselftest-filesystems * kselftest-firmware * kselftest-fpu * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-kexec * kselftest-kvm * kselftest-lib * kselftest-livepatch * kselftest-membarrier * kselftest-net * kselftest-netfilter * kselftest-nsfs * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-splice * kselftest-static_keys * kselftest-sync * kselftest-sysctl * kselftest-tc-testing * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-vm * kselftest-x86 * kselftest-zram * kvm-unit-tests * libhugetlbfs * linux-log-parser * ltp-cap_bounds-tests * ltp-commands-tests * ltp-containers-tests * ltp-controllers-tests * ltp-cpuhotplug-tests * ltp-crypto-tests * ltp-cve-tests * ltp-dio-tests * ltp-fcntl-locktests-tests * ltp-filecaps-tests * ltp-fs-tests * ltp-fs_bind-tests * ltp-fs_perms_simple-tests * ltp-fsx-tests * ltp-hugetlb-tests * ltp-io-tests * ltp-ipc-tests * ltp-math-tests * ltp-mm-tests * ltp-nptl-tests * ltp-open-posix-tests * ltp-pty-tests * ltp-sched-tests * ltp-securebits-tests * ltp-syscalls-tests * ltp-tracing-tests * network-basic-tests * packetdrill * perf * rcutorture * ssuite * v4l2-compliance * vdso
-- Linaro LKFT https://lkft.linaro.org
On Mon, Feb 28, 2022 at 06:23:56PM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.14.269 release. There are 31 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000. Anything received after that time might be too late.
Build results: total: 168 pass: 168 fail: 0 Qemu test results: total: 424 pass: 424 fail: 0
Tested-by: Guenter Roeck linux@roeck-us.net
Guenter
On Mon, Feb 28, 2022, at 12:23 PM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.14.269 release. There are 31 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000. Anything received after that time might be too late.
4.14.269-rc1 compiled and booted with no errors or regressions on my x86_64 test system.
Tested-by: Slade Watkins slade@sladewatkins.com
Cheers, Slade
linux-stable-mirror@lists.linaro.org
-
Greg Kroah-Hartman -
Guenter Roeck -
Jon Hunter -
Naresh Kamboju -
Slade Watkins