From: Jann Horn jannh@google.com

commit f268f6cf875f3220afc77bdd0bf1bb136eb54db9 upstream.

Any codepath that zaps page table entries must invoke MMU notifiers to ensure that secondary MMUs (like KVM) don't keep accessing pages which aren't mapped anymore. Secondary MMUs don't hold their own references to pages that are mirrored over, so failing to notify them can lead to page use-after-free.

I'm marking this as addressing an issue introduced in commit f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages"), but most of the security impact of this only came in commit 27e1f8273113 ("khugepaged: enable collapse pmd for pte-mapped THP"), which actually omitted flushes for the removal of present PTEs, not just for the removal of empty page tables.

Link: https://lkml.kernel.org/r/20221129154730.2274278-3-jannh@google.com Link: https://lkml.kernel.org/r/20221128180252.1684965-3-jannh@google.com Link: https://lkml.kernel.org/r/20221125213714.4115729-3-jannh@google.com Fixes: f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Jann Horn jannh@google.com Acked-by: David Hildenbrand david@redhat.com Reviewed-by: Yang Shi shy828301@gmail.com Cc: John Hubbard jhubbard@nvidia.com Cc: Peter Xu peterx@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org [manual backport: this code was refactored from two copies into a common helper between 5.15 and 6.0; pmd collapse for PTE-mapped THP was only added in 5.4; MMU notifier API changed between 4.19 and 5.4] Signed-off-by: Jann Horn jannh@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/khugepaged.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/mm/khugepaged.c +++ b/mm/khugepaged.c @@ -1303,13 +1303,20 @@ static void retract_page_tables(struct a */ if (down_write_trylock(&mm->mmap_sem)) { if (!khugepaged_test_exit(mm)) { - spinlock_t *ptl = pmd_lock(mm, pmd); + spinlock_t *ptl; + unsigned long end = addr + HPAGE_PMD_SIZE; + + mmu_notifier_invalidate_range_start(mm, addr, + end); + ptl = pmd_lock(mm, pmd); /* assume page table is clear */ _pmd = pmdp_collapse_flush(vma, addr, pmd); spin_unlock(ptl); mm_dec_nr_ptes(mm); tlb_remove_table_sync_one(); pte_free(mm, pmd_pgtable(_pmd)); + mmu_notifier_invalidate_range_end(mm, addr, + end); } up_write(&mm->mmap_sem); }

From: Jialiang Wang wangjialiang0806@163.com

commit 02e1a114fdb71e59ee6770294166c30d437bf86a upstream.

area_cache_get() is used to distribute cache->area and set cache->id, and if cache->id is not 0 and cache->area->kref refcount is 0, it will release the cache->area by nfp_cpp_area_release(). area_cache_get() set cache->id before cpp->op->area_init() and nfp_cpp_area_acquire().

But if area_init() or nfp_cpp_area_acquire() fails, the cache->id is is already set but the refcount is not increased as expected. At this time, calling the nfp_cpp_area_release() will cause use-after-free.

To avoid the use-after-free, set cache->id after area_init() and nfp_cpp_area_acquire() complete successfully.

Note: This vulnerability is triggerable by providing emulated device equipped with specified configuration.

BUG: KASAN: use-after-free in nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760) Write of size 4 at addr ffff888005b7f4a0 by task swapper/0/1

Call Trace: <TASK> nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760) area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:884)

Allocated by task 1: nfp_cpp_area_alloc_with_name (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:303) nfp_cpp_area_cache_add (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:802) nfp6000_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:1230) nfp_cpp_from_operations (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:1215) nfp_pci_probe (drivers/net/ethernet/netronome/nfp/nfp_main.c:744)

Freed by task 1: kfree (mm/slub.c:4562) area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:873) nfp_cpp_read (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:924 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:973) nfp_cpp_readl (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpplib.c:48)

Signed-off-by: Jialiang Wang wangjialiang0806@163.com Reviewed-by: Yinjun Zhang yinjun.zhang@corigine.com Acked-by: Simon Horman simon.horman@corigine.com Link: https://lore.kernel.org/r/20220810073057.4032-1-wangjialiang0806@163.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c +++ b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c @@ -874,7 +874,6 @@ area_cache_get(struct nfp_cpp *cpp, u32 }

/* Adjust the start address to be cache size aligned */ - cache->id = id; cache->addr = addr & ~(u64)(cache->size - 1);

/* Re-init to the new ID and address */ @@ -894,6 +893,8 @@ area_cache_get(struct nfp_cpp *cpp, u32 return NULL; }

+ cache->id = id; + exit: /* Adjust offset */ *offset = addr - cache->addr;

From: Ricardo Ribalda ribalda@chromium.org

[ Upstream commit 11780e37565db4dd064d3243ca68f755c13f65b4 ]

If the system is restarted via kexec(), the peripherals do not start with a known state.

If the previous system had enabled an IRQs we will receive unexected IRQs that can lock the system.

[ 28.109251] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:0] [ 28.109263] Modules linked in: [ 28.109273] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.79-14458-g4b9edf7b1ac6 #1 9f2e76613148af94acccd64c609a552fb4b4354b [ 28.109284] Hardware name: Google Elm (DT) [ 28.109290] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 28.109298] pc : __do_softirq+0xa0/0x388 [ 28.109309] lr : __do_softirq+0x70/0x388 [ 28.109316] sp : ffffffc008003ee0 [ 28.109321] x29: ffffffc008003f00 x28: 000000000000000a x27: 0000000000000080 [ 28.109334] x26: 0000000000000001 x25: ffffffefa7b350c0 x24: ffffffefa7b47480 [ 28.109346] x23: ffffffefa7b3d000 x22: 0000000000000000 x21: ffffffefa7b0fa40 [ 28.109358] x20: ffffffefa7b005b0 x19: ffffffefa7b47480 x18: 0000000000065b6b [ 28.109370] x17: ffffffefa749c8b0 x16: 000000000000018c x15: 00000000000001b8 [ 28.109382] x14: 00000000000d3b6b x13: 0000000000000006 x12: 0000000000057e91 [ 28.109394] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffefa7b47480 [ 28.109406] x8 : 00000000000000e0 x7 : 000000000f424000 x6 : 0000000000000000 [ 28.109418] x5 : ffffffefa7dfaca0 x4 : ffffffefa7dfadf0 x3 : 000000000000000f [ 28.109429] x2 : 0000000000000000 x1 : 0000000000000100 x0 : 0000000001ac65c5 [ 28.109441] Call trace: [ 28.109447] __do_softirq+0xa0/0x388 [ 28.109454] irq_exit+0xc0/0xe0 [ 28.109464] handle_domain_irq+0x68/0x90 [ 28.109473] gic_handle_irq+0xac/0xf0 [ 28.109480] call_on_irq_stack+0x28/0x50 [ 28.109488] do_interrupt_handler+0x44/0x58 [ 28.109496] el1_interrupt+0x30/0x58 [ 28.109506] el1h_64_irq_handler+0x18/0x24 [ 28.109512] el1h_64_irq+0x7c/0x80 [ 28.109519] arch_local_irq_enable+0xc/0x18 [ 28.109529] default_idle_call+0x40/0x140 [ 28.109539] do_idle+0x108/0x290 [ 28.109547] cpu_startup_entry+0x2c/0x30 [ 28.109554] rest_init+0xe8/0xf8 [ 28.109562] arch_call_rest_init+0x18/0x24 [ 28.109571] start_kernel+0x338/0x42c [ 28.109578] __primary_switched+0xbc/0xc4 [ 28.109588] Kernel panic - not syncing: softlockup: hung tasks

Signed-off-by: Ricardo Ribalda ribalda@chromium.org Link: https://lore.kernel.org/r/20221122-mtk-pinctrl-v1-1-bedf5655a3d2@chromium.or... Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Reviewed-by: Matthias Brugger matthias.bgg@gmail.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/mediatek/mtk-eint.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/mediatek/mtk-eint.c b/drivers/pinctrl/mediatek/mtk-eint.c index 564cfaee129d..55e3305ede81 100644 --- a/drivers/pinctrl/mediatek/mtk-eint.c +++ b/drivers/pinctrl/mediatek/mtk-eint.c @@ -277,12 +277,15 @@ static struct irq_chip mtk_eint_irq_chip = {

static unsigned int mtk_eint_hw_init(struct mtk_eint *eint) { - void __iomem *reg = eint->base + eint->regs->dom_en; + void __iomem *dom_en = eint->base + eint->regs->dom_en; + void __iomem *mask_set = eint->base + eint->regs->mask_set; unsigned int i;

for (i = 0; i < eint->hw->ap_num; i += 32) { - writel(0xffffffff, reg); - reg += 4; + writel(0xffffffff, dom_en); + writel(0xffffffff, mask_set); + dom_en += 4; + mask_set += 4; }

return 0;

From: Yasushi SHOJI yasushi.shoji@gmail.com

[ Upstream commit 1a8e3bd25f1e789c8154e11ea24dc3ec5a4c1da0 ]

Microchip USB Analyzer can activate the internal termination resistors by setting the "termination" option ON, or OFF to to deactivate them. As I've observed, both with my oscilloscope and captured USB packets below, you must send "0" to turn it ON, and "1" to turn it OFF.

From the schematics in the user's guide, I can confirm that you must

drive the CAN_RES signal LOW "0" to activate the resistors.

Reverse the argument value of usb_msg.termination to fix this.

These are the two commands sequence, ON then OFF.

No. Time Source Destination Protocol Length Info 1 0.000000 host 1.3.1 USB 46 URB_BULK out

Frame 1: 46 bytes on wire (368 bits), 46 bytes captured (368 bits) USB URB Leftover Capture Data: a80000000000000000000000000000000000a8

No. Time Source Destination Protocol Length Info 2 4.372547 host 1.3.1 USB 46 URB_BULK out

Frame 2: 46 bytes on wire (368 bits), 46 bytes captured (368 bits) USB URB Leftover Capture Data: a80100000000000000000000000000000000a9

Signed-off-by: Yasushi SHOJI yashi@spacecubics.com Link: https://lore.kernel.org/all/20221124152504.125994-1-yashi@spacecubics.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/can/usb/mcba_usb.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c index ea1de06009d6..093458fbde68 100644 --- a/drivers/net/can/usb/mcba_usb.c +++ b/drivers/net/can/usb/mcba_usb.c @@ -58,6 +58,10 @@ #define MCBA_VER_REQ_USB 1 #define MCBA_VER_REQ_CAN 2

+/* Drive the CAN_RES signal LOW "0" to activate R24 and R25 */ +#define MCBA_VER_TERMINATION_ON 0 +#define MCBA_VER_TERMINATION_OFF 1 + #define MCBA_SIDL_EXID_MASK 0x8 #define MCBA_DLC_MASK 0xf #define MCBA_DLC_RTR_MASK 0x40 @@ -480,7 +484,7 @@ static void mcba_usb_process_ka_usb(struct mcba_priv *priv, priv->usb_ka_first_pass = false; }

- if (msg->termination_state) + if (msg->termination_state == MCBA_VER_TERMINATION_ON) priv->can.termination = MCBA_TERMINATION_ENABLED; else priv->can.termination = MCBA_TERMINATION_DISABLED; @@ -800,9 +804,9 @@ static int mcba_set_termination(struct net_device *netdev, u16 term) };

if (term == MCBA_TERMINATION_ENABLED) - usb_msg.termination = 1; + usb_msg.termination = MCBA_VER_TERMINATION_ON; else - usb_msg.termination = 0; + usb_msg.termination = MCBA_VER_TERMINATION_OFF;

mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg);

From: Tony Jones tonyj@suse.de

commit d72eadbc1d2866fc047edd4535ffb0298fe240be upstream.

tests/attr.c invokes attr.py via an explicit invocation of Python ($PYTHON) so there is therefore no need for an explicit shebang.

Also most distros follow pep-0394 which recommends that /usr/bin/python refer only to v2 and so may not exist on the system (if PYTHON=python3).

Signed-off-by: Tony Jones tonyj@suse.de Acked-by: Jiri Olsa jolsa@kernel.org Cc: Jonathan Corbet corbet@lwn.net Cc: Ravi Bangoria ravi.bangoria@linux.ibm.com Cc: Seeteena Thoufeek s1seetee@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/20190124005229.16146-5-tonyj@suse.de Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/perf/tests/attr.py | 1 - 1 file changed, 1 deletion(-)

--- a/tools/perf/tests/attr.py +++ b/tools/perf/tests/attr.py @@ -1,4 +1,3 @@ -#! /usr/bin/python # SPDX-License-Identifier: GPL-2.0

import os

From: Jan Kara jack@suse.cz

commit cfe4c1b25dd6d2f056afc00b7c98bcb3dd0b1fc3 upstream.

When preallocation extent is the first one in the extent block, the code would corrupt extent tree header instead. Fix the problem and use udf_delete_aext() for deleting extent to avoid some code duplication.

CC: stable@vger.kernel.org Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/udf/truncate.c | 45 +++++++++++++-------------------------------- 1 file changed, 13 insertions(+), 32 deletions(-)

--- a/fs/udf/truncate.c +++ b/fs/udf/truncate.c @@ -120,60 +120,41 @@ void udf_truncate_tail_extent(struct ino

void udf_discard_prealloc(struct inode *inode) { - struct extent_position epos = { NULL, 0, {0, 0} }; + struct extent_position epos = {}; + struct extent_position prev_epos = {}; struct kernel_lb_addr eloc; uint32_t elen; uint64_t lbcount = 0; int8_t etype = -1, netype; - int adsize; struct udf_inode_info *iinfo = UDF_I(inode);

if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB || inode->i_size == iinfo->i_lenExtents) return;

- if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT) - adsize = sizeof(struct short_ad); - else if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG) - adsize = sizeof(struct long_ad); - else - adsize = 0; - epos.block = iinfo->i_location;

/* Find the last extent in the file */ - while ((netype = udf_next_aext(inode, &epos, &eloc, &elen, 1)) != -1) { - etype = netype; + while ((netype = udf_next_aext(inode, &epos, &eloc, &elen, 0)) != -1) { + brelse(prev_epos.bh); + prev_epos = epos; + if (prev_epos.bh) + get_bh(prev_epos.bh); + + etype = udf_next_aext(inode, &epos, &eloc, &elen, 1); lbcount += elen; } if (etype == (EXT_NOT_RECORDED_ALLOCATED >> 30)) { - epos.offset -= adsize; lbcount -= elen; - extent_trunc(inode, &epos, &eloc, etype, elen, 0); - if (!epos.bh) { - iinfo->i_lenAlloc = - epos.offset - - udf_file_entry_alloc_offset(inode); - mark_inode_dirty(inode); - } else { - struct allocExtDesc *aed = - (struct allocExtDesc *)(epos.bh->b_data); - aed->lengthAllocDescs = - cpu_to_le32(epos.offset - - sizeof(struct allocExtDesc)); - if (!UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_STRICT) || - UDF_SB(inode->i_sb)->s_udfrev >= 0x0201) - udf_update_tag(epos.bh->b_data, epos.offset); - else - udf_update_tag(epos.bh->b_data, - sizeof(struct allocExtDesc)); - mark_buffer_dirty_inode(epos.bh, inode); - } + udf_delete_aext(inode, prev_epos); + udf_free_blocks(inode->i_sb, inode, &eloc, 0, + DIV_ROUND_UP(elen, 1 << inode->i_blkbits)); } /* This inode entry is in-memory only and thus we don't have to mark * the inode dirty */ iinfo->i_lenExtents = lbcount; brelse(epos.bh); + brelse(prev_epos.bh); }

static void udf_update_alloc_ext_desc(struct inode *inode,

From: Jan Kara jack@suse.cz

commit 1f3868f06855c97a4954c99b36f3fc9eb8f60326 upstream.

When extending file within last block it can happen that the extent is already rounded to the blocksize and thus contains the offset we want to grow up to. In such case we would mistakenly expand the last extent and make it one block longer than it should be, exposing unallocated block in a file and causing data corruption. Fix the problem by properly detecting this case and bailing out.

CC: stable@vger.kernel.org Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/udf/inode.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-)

--- a/fs/udf/inode.c +++ b/fs/udf/inode.c @@ -585,13 +585,17 @@ out: static void udf_do_extend_final_block(struct inode *inode, struct extent_position *last_pos, struct kernel_long_ad *last_ext, - uint32_t final_block_len) + uint32_t new_elen) { - struct super_block *sb = inode->i_sb; uint32_t added_bytes;

- added_bytes = final_block_len - - (last_ext->extLength & (sb->s_blocksize - 1)); + /* + * Extent already large enough? It may be already rounded up to block + * size... + */ + if (new_elen <= (last_ext->extLength & UDF_EXTENT_LENGTH_MASK)) + return; + added_bytes = (last_ext->extLength & UDF_EXTENT_LENGTH_MASK) - new_elen; last_ext->extLength += added_bytes; UDF_I(inode)->i_lenExtents += added_bytes;

@@ -608,12 +612,12 @@ static int udf_extend_file(struct inode int8_t etype; struct super_block *sb = inode->i_sb; sector_t first_block = newsize >> sb->s_blocksize_bits, offset; - unsigned long partial_final_block; + loff_t new_elen; int adsize; struct udf_inode_info *iinfo = UDF_I(inode); struct kernel_long_ad extent; int err = 0; - int within_final_block; + bool within_last_ext;

if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT) adsize = sizeof(struct short_ad); @@ -629,9 +633,9 @@ static int udf_extend_file(struct inode udf_discard_prealloc(inode);

etype = inode_bmap(inode, first_block, &epos, &eloc, &elen, &offset); - within_final_block = (etype != -1); + within_last_ext = (etype != -1); /* We don't expect extents past EOF... */ - WARN_ON_ONCE(etype != -1 && + WARN_ON_ONCE(within_last_ext && elen > ((loff_t)offset + 1) << inode->i_blkbits);

if ((!epos.bh && epos.offset == udf_file_entry_alloc_offset(inode)) || @@ -648,19 +652,17 @@ static int udf_extend_file(struct inode extent.extLength |= etype << 30; }

- partial_final_block = newsize & (sb->s_blocksize - 1); + new_elen = ((loff_t)offset << inode->i_blkbits) | + (newsize & (sb->s_blocksize - 1));

/* File has extent covering the new size (could happen when extending * inside a block)? */ - if (within_final_block) { + if (within_last_ext) { /* Extending file within the last file block */ - udf_do_extend_final_block(inode, &epos, &extent, - partial_final_block); + udf_do_extend_final_block(inode, &epos, &extent, new_elen); } else { - loff_t add = ((loff_t)offset << sb->s_blocksize_bits) | - partial_final_block; - err = udf_do_extend_file(inode, &epos, &extent, add); + err = udf_do_extend_file(inode, &epos, &extent, new_elen); }

if (err < 0)

From: Duke Xin duke_xinanwen@163.com

commit f0052d7a1edb3d8921b4e154aa8c46c4845b3714 upstream.

The EM05-G modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively:

"RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem

The detailed description of the USB configuration for each mode as follows:

RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0311 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0311 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Duke Xin duke_xinanwen@163.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -255,6 +255,7 @@ static void option_instat_callback(struc #define QUECTEL_PRODUCT_EP06 0x0306 #define QUECTEL_PRODUCT_EM05G 0x030a #define QUECTEL_PRODUCT_EM060K 0x030b +#define QUECTEL_PRODUCT_EM05G_SG 0x0311 #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 #define QUECTEL_PRODUCT_RM520N 0x0801 @@ -1160,6 +1161,8 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff), .driver_info = RSVD(6) | ZLP }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_SG, 0xff), + .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },

From: Johan Hovold johan@kernel.org

commit 188c9c2e0c7f4ae864113f80c40bafb394062271 upstream.

The driver leaves the line speed unchanged in case a requested speed is not supported. Make sure to handle the case where the current speed is B0 (hangup) without dividing by zero when determining the clock source.

Fixes: 3aacac02f385 ("USB: serial: f81534: add high baud rate support") Cc: stable@vger.kernel.org # 4.16 Cc: Ji-Ze Hong (Peter Hong) hpeter@gmail.com Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/f81534.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/usb/serial/f81534.c +++ b/drivers/usb/serial/f81534.c @@ -538,9 +538,6 @@ static int f81534_submit_writer(struct u

static u32 f81534_calc_baud_divisor(u32 baudrate, u32 clockrate) { - if (!baudrate) - return 0; - /* Round to nearest divisor */ return DIV_ROUND_CLOSEST(clockrate, baudrate); } @@ -570,9 +567,14 @@ static int f81534_set_port_config(struct u32 baud_list[] = {baudrate, old_baudrate, F81534_DEFAULT_BAUD_RATE};

for (i = 0; i < ARRAY_SIZE(baud_list); ++i) { - idx = f81534_find_clk(baud_list[i]); + baudrate = baud_list[i]; + if (baudrate == 0) { + tty_encode_baud_rate(tty, 0, 0); + return 0; + } + + idx = f81534_find_clk(baudrate); if (idx >= 0) { - baudrate = baud_list[i]; tty_encode_baud_rate(tty, baudrate, baudrate); break; }

From: Sungwoo Kim iam@sung-woo.kim

[ Upstream commit bcd70260ef56e0aee8a4fc6cd214a419900b0765 ]

By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP

Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...)

ACL Data RX: Handle 200 flags 0x00 dlen 1033 #32 [hci0] 14.273106

invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............

ACL Data RX: Handle 200 flags 0x00 dlen 1547 #33 [hci0] 14.273561

invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@.....

ACL Data RX: Handle 200 flags 0x00 dlen 2061 #34 [hci0] 14.274390

invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@.......

ACL Data RX: Handle 200 flags 0x00 dlen 2061 #35 [hci0] 14.274932

invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828

ACL Data RX: Handle 200 flags 0x00 dlen 1033 #36 [hci0] 14.275753

invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@...

Signed-off-by: Sungwoo Kim iam@sung-woo.kim Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/l2cap_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index fd6cd47a6c5a..fd95631205a6 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -4193,7 +4193,8 @@ static inline int l2cap_config_req(struct l2cap_conn *conn,

chan->ident = cmd->ident; l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, len, rsp); - chan->num_conf_rsp++; + if (chan->num_conf_rsp < L2CAP_CONF_MAX_CONF_RSP) + chan->num_conf_rsp++;

/* Reset config buffer. */ chan->conf_len = 0;

From: Ivaylo Dimitrov ivo.g.dimitrov.75@gmail.com

[ Upstream commit ecec4b20d29c3d6922dafe7d2555254a454272d2 ]

The checks for musb->xceiv and musb->xceiv->set_power duplicate those in usb_phy_set_power(), so there is no need of them. Moreover, not calling usb_phy_set_power() results in usb_phy_set_charger_current() not being called, so current USB config max current is not propagated through USB charger framework and charger drivers may try to draw more current than allowed or possible.

Fix that by removing those extra checks and calling usb_phy_set_power() directly.

Tested on Motorola Droid4 and Nokia N900

Fixes: a9081a008f84 ("usb: phy: Add USB charger support") Cc: stable stable@kernel.org Signed-off-by: Ivaylo Dimitrov ivo.g.dimitrov.75@gmail.com Link: https://lore.kernel.org/r/1669400475-4762-1-git-send-email-ivo.g.dimitrov.75... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/musb/musb_gadget.c | 2 -- 1 file changed, 2 deletions(-)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 8e83995fc3bd..b8fc818c154a 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1629,8 +1629,6 @@ static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA) { struct musb *musb = gadget_to_musb(gadget);

- if (!musb->xceiv->set_power) - return -EOPNOTSUPP; return usb_phy_set_power(musb->xceiv, mA); }

From: Chen Jiahao chenjiahao16@huawei.com

[ Upstream commit adf85adc2a7199b41e7a4da083bd17274a3d6969 ]

There is a sparse warning shown below:

drivers/soc/ti/knav_qmss_queue.c:70:12: warning: symbol 'knav_acc_firmwares' was not declared. Should it be static?

Since 'knav_acc_firmwares' is only called within knav_qmss_queue.c, mark it as static to fix the warning.

Fixes: 96ee19becc3b ("soc: ti: add firmware file name as part of the driver") Signed-off-by: Chen Jiahao chenjiahao16@huawei.com Signed-off-by: Nishanth Menon nm@ti.com Link: https://lore.kernel.org/r/20221019153212.72350-1-chenjiahao16@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/ti/knav_qmss_queue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c index 9f5ce52e6c16..b264c36b2c0e 100644 --- a/drivers/soc/ti/knav_qmss_queue.c +++ b/drivers/soc/ti/knav_qmss_queue.c @@ -72,7 +72,7 @@ static DEFINE_MUTEX(knav_dev_lock); * Newest followed by older ones. Search is done from start of the array * until a firmware file is found. */ -const char *knav_acc_firmwares[] = {"ks2_qmss_pdsp_acc48.bin"}; +static const char * const knav_acc_firmwares[] = {"ks2_qmss_pdsp_acc48.bin"};

static bool device_ready; bool knav_qmss_device_ready(void)

From: Zhang Qilong zhangqilong3@huawei.com

[ Upstream commit 69460e68eb662064ab4188d4e129ff31c1f23ed9 ]

The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context.

Fixes: 984aa6dbf4ca ("OMAP3: PM: Adding smartreflex driver support.") Signed-off-by: Zhang Qilong zhangqilong3@huawei.com Signed-off-by: Nishanth Menon nm@ti.com Link: https://lore.kernel.org/r/20221108080322.52268-3-zhangqilong3@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/power/avs/smartreflex.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c index 8760477d0e8a..5ac122cd25b8 100644 --- a/drivers/power/avs/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -984,6 +984,7 @@ static int omap_sr_probe(struct platform_device *pdev) err_debugfs: debugfs_remove_recursive(sr_info->dbg_dir); err_list_del: + pm_runtime_disable(&pdev->dev); list_del(&sr_info->node);

pm_runtime_put_sync(&pdev->dev);

From: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com

[ Upstream commit e4495a0a8b3d84816c9a46edf3ce060bbf267475 ]

Rename the fixed-clock oscillators to remove the unit address.

This solves unit_address_vs_reg warnings.

Fixes: 5d4839709c8e ("arm64: dts: mt2712: Add clock controller device nodes") Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Link: https://lore.kernel.org/r/20221013152212.416661-4-angelogioacchino.delregno@... Signed-off-by: Matthias Brugger matthias.bgg@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 75cc0f7cc088..b002bfd85be0 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -158,70 +158,70 @@ sys_clk: dummyclk { #clock-cells = <0>; };

- clk26m: oscillator@0 { + clk26m: oscillator-26m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; clock-output-names = "clk26m"; };

- clk32k: oscillator@1 { + clk32k: oscillator-32k { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; clock-output-names = "clk32k"; };

- clkfpc: oscillator@2 { + clkfpc: oscillator-50m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; clock-output-names = "clkfpc"; };

- clkaud_ext_i_0: oscillator@3 { + clkaud_ext_i_0: oscillator-aud0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <6500000>; clock-output-names = "clkaud_ext_i_0"; };

- clkaud_ext_i_1: oscillator@4 { + clkaud_ext_i_1: oscillator-aud1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <196608000>; clock-output-names = "clkaud_ext_i_1"; };

- clkaud_ext_i_2: oscillator@5 { + clkaud_ext_i_2: oscillator-aud2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <180633600>; clock-output-names = "clkaud_ext_i_2"; };

- clki2si0_mck_i: oscillator@6 { + clki2si0_mck_i: oscillator-i2s0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>; clock-output-names = "clki2si0_mck_i"; };

- clki2si1_mck_i: oscillator@7 { + clki2si1_mck_i: oscillator-i2s1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>; clock-output-names = "clki2si1_mck_i"; };

- clki2si2_mck_i: oscillator@8 { + clki2si2_mck_i: oscillator-i2s2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>; clock-output-names = "clki2si2_mck_i"; };

- clktdmin_mclk_i: oscillator@9 { + clktdmin_mclk_i: oscillator-mclk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>;

From: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com

[ Upstream commit 377063156893bf6c088309ac799fe5c6dce2822d ]

Update the names to regulator-vproc-buck{0,1} to fix unit_addres_vs_reg warnings for those.

Fixes: f75dd8bdd344 ("arm64: dts: mediatek: add mt2712 cpufreq related device nodes") Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Link: https://lore.kernel.org/r/20221013152212.416661-6-angelogioacchino.delregno@... Signed-off-by: Matthias Brugger matthias.bgg@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts index 4ce9d6ca0bf7..424c22a266c4 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts @@ -25,14 +25,14 @@ chosen { stdout-path = "serial0:921600n8"; };

- cpus_fixed_vproc0: fixedregulator@0 { + cpus_fixed_vproc0: regulator-vproc-buck0 { compatible = "regulator-fixed"; regulator-name = "vproc_buck0"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; };

- cpus_fixed_vproc1: fixedregulator@1 { + cpus_fixed_vproc1: regulator-vproc-buck1 { compatible = "regulator-fixed"; regulator-name = "vproc_buck1"; regulator-min-microvolt = <1000000>;

From: Pali Rohár pali@kernel.org

[ Upstream commit dcc7d8c72b64a479b8017e4332d99179deb8802d ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 74ecaa403a74 ("ARM: dove: add PCIe controllers to SoC DT") Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/dove.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 250ad0535e8c..c677d1a74a90 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -129,7 +129,7 @@ pcie0: pcie@1 { pcie1: pcie@2 { device_type = "pci"; status = "disabled"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x80000 0 0x2000>; reg = <0x1000 0 0 0 0>; clocks = <&gate_clk 5>; marvell,pcie-port = <1>;

From: Pali Rohár pali@kernel.org

[ Upstream commit eab276787f456cbea89fabea110fe0728673d308 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 9d8f44f02d4a ("arm: mvebu: add PCIe Device Tree informations for Armada XP") Fixes: 12b69a599745 ("ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable") Fixes: 2163e61c92d9 ("ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260") Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 8 ++++---- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 16 ++++++++-------- 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 8558bf6bb54c..d55fe162fc7f 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -97,7 +97,7 @@ pcie1: pcie@1,0 {

pcie2: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -115,7 +115,7 @@ pcie2: pcie@2,0 {

pcie3: pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -133,7 +133,7 @@ pcie3: pcie@3,0 {

pcie4: pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -151,7 +151,7 @@ pcie4: pcie@4,0 {

pcie5: pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 2d85fe8ac327..fdcc81819940 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -112,7 +112,7 @@ pcie1: pcie@1,0 {

pcie2: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -130,7 +130,7 @@ pcie2: pcie@2,0 {

pcie3: pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -148,7 +148,7 @@ pcie3: pcie@3,0 {

pcie4: pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -166,7 +166,7 @@ pcie4: pcie@4,0 {

pcie5: pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -184,7 +184,7 @@ pcie5: pcie@5,0 {

pcie6: pcie@6,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; + assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; reg = <0x3000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -202,7 +202,7 @@ pcie6: pcie@6,0 {

pcie7: pcie@7,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; + assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; reg = <0x3800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -220,7 +220,7 @@ pcie7: pcie@7,0 {

pcie8: pcie@8,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; + assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; reg = <0x4000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -238,7 +238,7 @@ pcie8: pcie@8,0 {

pcie9: pcie@9,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; reg = <0x4800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>;

From: Pali Rohár pali@kernel.org

[ Upstream commit 44f47b7a8fa4678ce4c38ea74837e4996b9df6d6 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs") Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/armada-380.dtsi | 4 ++-- arch/arm/boot/dts/armada-385.dtsi | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index cff1269f3fbf..7146cc8f082a 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -79,7 +79,7 @@ pcie@1,0 { /* x1 port */ pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x40000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -98,7 +98,7 @@ pcie@2,0 { /* x1 port */ pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x44000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index f0022d10c715..f081f7cb66e5 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -84,7 +84,7 @@ pcie1: pcie@1,0 { /* x1 port */ pcie2: pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x40000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -103,7 +103,7 @@ pcie2: pcie@2,0 { /* x1 port */ pcie3: pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x44000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -125,7 +125,7 @@ pcie3: pcie@3,0 { */ pcie4: pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x48000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>;

From: Pali Rohár pali@kernel.org

[ Upstream commit f1f3e530c59a7e8c5f06172f4c28b945a6b4bfb8 ]

This allows bootloader to correctly pass MAC addresses used by bootloader to individual interfaces into kernel device tree.

Signed-off-by: Pali Rohár pali@kernel.org Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/armada-385-turris-omnia.dts | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 92e08486ec81..c0a026ac7be8 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -22,6 +22,12 @@ chosen { stdout-path = &uart0; };

+ aliases { + ethernet0 = &eth0; + ethernet1 = &eth1; + ethernet2 = &eth2; + }; + memory { device_type = "memory"; reg = <0x00000000 0x40000000>; /* 1024 MB */

From: Wang Yufen wangyufen@huawei.com

[ Upstream commit e1fce564900f8734edf15b87f028c57e14f6e28d ]

In the if (dev_of_node(dev) && !pdata) path, the "err" may be assigned a value of 0, so the error return code -EINVAL may be incorrectly set to 0. To fix set valid return code before calling to goto.

Fixes: 35da60941e44 ("pstore/ram: add Device Tree bindings") Signed-off-by: Wang Yufen wangyufen@huawei.com Signed-off-by: Kees Cook keescook@chromium.org Link: https://lore.kernel.org/r/1669969374-46582-1-git-send-email-wangyufen@huawei... Signed-off-by: Sasha Levin sashal@kernel.org --- fs/pstore/ram.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c index bafbab2dd039..33294dee7d7f 100644 --- a/fs/pstore/ram.c +++ b/fs/pstore/ram.c @@ -753,6 +753,7 @@ static int ramoops_probe(struct platform_device *pdev) /* Make sure we didn't get bogus platform data pointer. */ if (!pdata) { pr_err("NULL platform data\n"); + err = -EINVAL; goto fail_out; }

@@ -760,6 +761,7 @@ static int ramoops_probe(struct platform_device *pdev) !pdata->ftrace_size && !pdata->pmsg_size)) { pr_err("The memory size and the record/console size must be " "non-zero\n"); + err = -EINVAL; goto fail_out; }

From: Stephen Boyd swboyd@chromium.org

[ Upstream commit e6b842741b4f39007215fd7e545cb55aa3d358a2 ]

An oops can be induced by running 'cat /proc/kcore > /dev/null' on devices using pstore with the ram backend because kmap_atomic() assumes lowmem pages are accessible with __va().

Unable to handle kernel paging request at virtual address ffffff807ff2b000 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000081d87000 [ffffff807ff2b000] pgd=180000017fe18003, p4d=180000017fe18003, pud=180000017fe18003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: dm_integrity CPU: 7 PID: 21179 Comm: perf Not tainted 5.15.67-10882-ge4eb2eb988cd #1 baa443fb8e8477896a370b31a821eb2009f9bfba Hardware name: Google Lazor (rev3 - 8) (DT) pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __memcpy+0x110/0x260 lr : vread+0x194/0x294 sp : ffffffc013ee39d0 x29: ffffffc013ee39f0 x28: 0000000000001000 x27: ffffff807ff2b000 x26: 0000000000001000 x25: ffffffc0085a2000 x24: ffffff802d4b3000 x23: ffffff80f8a60000 x22: ffffff802d4b3000 x21: ffffffc0085a2000 x20: ffffff8080b7bc68 x19: 0000000000001000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffd3073f2e60 x14: ffffffffad588000 x13: 0000000000000000 x12: 0000000000000001 x11: 00000000000001a2 x10: 00680000fff2bf0b x9 : 03fffffff807ff2b x8 : 0000000000000001 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffffff802d4b4000 x4 : ffffff807ff2c000 x3 : ffffffc013ee3a78 x2 : 0000000000001000 x1 : ffffff807ff2b000 x0 : ffffff802d4b3000 Call trace: __memcpy+0x110/0x260 read_kcore+0x584/0x778 proc_reg_read+0xb4/0xe4

During early boot, memblock reserves the pages for the ramoops reserved memory node in DT that would otherwise be part of the direct lowmem mapping. Pstore's ram backend reuses those reserved pages to change the memory type (writeback or non-cached) by passing the pages to vmap() (see pfn_to_page() usage in persistent_ram_vmap() for more details) with specific flags. When read_kcore() starts iterating over the vmalloc region, it runs over the virtual address that vmap() returned for ramoops. In aligned_vread() the virtual address is passed to vmalloc_to_page() which returns the page struct for the reserved lowmem area. That lowmem page is passed to kmap_atomic(), which effectively calls page_to_virt() that assumes a lowmem page struct must be directly accessible with __va() and friends. These pages are mapped via vmap() though, and the lowmem mapping was never made, so accessing them via the lowmem virtual address oopses like above.

Let's side-step this problem by passing VM_IOREMAP to vmap(). This will tell vread() to not include the ramoops region in the kcore. Instead the area will look like a bunch of zeros. The alternative is to teach kmap() about vmalloc areas that intersect with lowmem. Presumably such a change isn't a one-liner, and there isn't much interest in inspecting the ramoops region in kcore files anyway, so the most expedient route is taken for now.

Cc: Brian Geffon bgeffon@google.com Cc: Mike Rapoport rppt@kernel.org Cc: Andrew Morton akpm@linux-foundation.org Fixes: 404a6043385d ("staging: android: persistent_ram: handle reserving and mapping memory") Signed-off-by: Stephen Boyd swboyd@chromium.org Signed-off-by: Kees Cook keescook@chromium.org Link: https://lore.kernel.org/r/20221205233136.3420802-1-swboyd@chromium.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/pstore/ram_core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/fs/pstore/ram_core.c b/fs/pstore/ram_core.c index 3c777ec80d47..60dff7180412 100644 --- a/fs/pstore/ram_core.c +++ b/fs/pstore/ram_core.c @@ -426,7 +426,11 @@ static void *persistent_ram_vmap(phys_addr_t start, size_t size, phys_addr_t addr = page_start + i * PAGE_SIZE; pages[i] = pfn_to_page(addr >> PAGE_SHIFT); } - vaddr = vmap(pages, page_count, VM_MAP, prot); + /* + * VM_IOREMAP used here to bypass this region during vread() + * and kmap_atomic() (i.e. kcore) to avoid __va() failures. + */ + vaddr = vmap(pages, page_count, VM_MAP | VM_IOREMAP, prot); kfree(pages);

/*

From: Ulf Hansson ulf.hansson@linaro.org

[ Upstream commit ee3c2c8ad6ba6785f14a60e4081d7c82e88162a2 ]

While we correctly skips to initialize an idle state from a disabled idle state node in DT, the returned value from dt_init_idle_driver() don't get adjusted accordingly. Instead the number of found idle state nodes are returned, while the callers are expecting the number of successfully initialized idle states from DT.

This leads to cpuidle drivers unnecessarily continues to initialize their idle state specific data. Moreover, in the case when all idle states have been disabled in DT, we would end up registering a cpuidle driver, rather than relying on the default arch specific idle call.

Fixes: 9f14da345599 ("drivers: cpuidle: implement DT based idle states infrastructure") Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Reviewed-by: Sudeep Holla sudeep.holla@arm.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/cpuidle/dt_idle_states.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpuidle/dt_idle_states.c b/drivers/cpuidle/dt_idle_states.c index 53342b7f1010..ea3c59d3fdad 100644 --- a/drivers/cpuidle/dt_idle_states.c +++ b/drivers/cpuidle/dt_idle_states.c @@ -224,6 +224,6 @@ int dt_init_idle_driver(struct cpuidle_driver *drv, * also be 0 on platforms with missing DT idle states or legacy DT * configuration predating the DT idle states bindings. */ - return i; + return state_idx - start_idx; } EXPORT_SYMBOL_GPL(dt_init_idle_driver);

From: Ondrej Mosnacek omosnace@redhat.com

[ Upstream commit e7eda157c4071cd1e69f4b1687b0fbe1ae5e6f46 ]

The check being unconditional may lead to unwanted denials reported by LSMs when a process has the capability granted by DAC, but denied by an LSM. In the case of SELinux such denials are a problem, since they can't be effectively filtered out via the policy and when not silenced, they produce noise that may hide a true problem or an attack.

Checking for the capability only if any trusted xattr is actually present wouldn't really address the issue, since calling listxattr(2) on such node on its own doesn't indicate an explicit attempt to see the trusted xattrs. Additionally, it could potentially leak the presence of trusted xattrs to an unprivileged user if they can check for the denials (e.g. through dmesg).

Therefore, it's best (and simplest) to keep the check unconditional and instead use ns_capable_noaudit() that will silence any associated LSM denials.

Fixes: 38f38657444d ("xattr: extract simple_xattr code from tmpfs") Reported-by: Martin Pitt mpitt@redhat.com Suggested-by: Christian Brauner (Microsoft) brauner@kernel.org Signed-off-by: Ondrej Mosnacek omosnace@redhat.com Reviewed-by: Christian Brauner (Microsoft) brauner@kernel.org Reviewed-by: Paul Moore paul@paul-moore.com Signed-off-by: Christian Brauner (Microsoft) brauner@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/xattr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xattr.c b/fs/xattr.c index 470ee0af3200..5c3407e18e15 100644 --- a/fs/xattr.c +++ b/fs/xattr.c @@ -1012,7 +1012,7 @@ static int xattr_list_one(char **buffer, ssize_t *remaining_size, ssize_t simple_xattr_list(struct inode *inode, struct simple_xattrs *xattrs, char *buffer, size_t size) { - bool trusted = capable(CAP_SYS_ADMIN); + bool trusted = ns_capable_noaudit(&init_user_ns, CAP_SYS_ADMIN); struct simple_xattr *xattr; ssize_t remaining_size = size; int err = 0;

From: Chen Zhongjin chenzhongjin@huawei.com

[ Upstream commit e8d7a90c08ce963c592fb49845f2ccc606a2ac21 ]

In pmu_dev_alloc(), when dev_set_name() failed, it will goto free_dev and call put_device(pmu->dev) to release it. However pmu->dev->release is assigned after this, which makes warning and memleak. Call dev_set_name() after pmu->dev->release = pmu_dev_release to fix it.

Device '(null)' does not have a release() function... WARNING: CPU: 2 PID: 441 at drivers/base/core.c:2332 device_release+0x1b9/0x240 ... Call Trace: <TASK> kobject_put+0x17f/0x460 put_device+0x20/0x30 pmu_dev_alloc+0x152/0x400 perf_pmu_register+0x96b/0xee0 ... kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) unreferenced object 0xffff888014759000 (size 2048): comm "modprobe", pid 441, jiffies 4294931444 (age 38.332s) backtrace: [<0000000005aed3b4>] kmalloc_trace+0x27/0x110 [<000000006b38f9b8>] pmu_dev_alloc+0x50/0x400 [<00000000735f17be>] perf_pmu_register+0x96b/0xee0 [<00000000e38477f1>] 0xffffffffc0ad8603 [<000000004e162216>] do_one_initcall+0xd0/0x4e0 ...

Fixes: abe43400579d ("perf: Sysfs enumeration") Signed-off-by: Chen Zhongjin chenzhongjin@huawei.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Link: https://lkml.kernel.org/r/20221111103653.91058-1-chenzhongjin@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/events/core.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c index ba66ea3ca705..668e5492e4c4 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -9682,13 +9682,15 @@ static int pmu_dev_alloc(struct pmu *pmu)

pmu->dev->groups = pmu->attr_groups; device_initialize(pmu->dev); - ret = dev_set_name(pmu->dev, "%s", pmu->name); - if (ret) - goto free_dev;

dev_set_drvdata(pmu->dev, pmu); pmu->dev->bus = &pmu_bus; pmu->dev->release = pmu_dev_release; + + ret = dev_set_name(pmu->dev, "%s", pmu->name); + if (ret) + goto free_dev; + ret = device_add(pmu->dev); if (ret) goto free_dev;

From: Alexey Dobriyan adobriyan@gmail.com

[ Upstream commit 5cc81d5c81af0dee54da9a67a3ebe4be076a13db ]

syscall(3) returns -1 and sets errno on error, unlike "syscall" instruction.

Systems which have <= 32/64 CPUs are unaffected. Test won't bounce to all CPUs before completing if there are more of them.

Link: https://lkml.kernel.org/r/Y1bUiT7VRXlXPQa1@p183 Fixes: 1f5bd0547654 ("proc: selftests: test /proc/uptime") Signed-off-by: Alexey Dobriyan adobriyan@gmail.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/proc/proc-uptime-002.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/proc/proc-uptime-002.c b/tools/testing/selftests/proc/proc-uptime-002.c index e7ceabed7f51..7d0aa22bdc12 100644 --- a/tools/testing/selftests/proc/proc-uptime-002.c +++ b/tools/testing/selftests/proc/proc-uptime-002.c @@ -17,6 +17,7 @@ // while shifting across CPUs. #undef NDEBUG #include <assert.h> +#include <errno.h> #include <unistd.h> #include <sys/syscall.h> #include <stdlib.h> @@ -54,7 +55,7 @@ int main(void) len += sizeof(unsigned long); free(m); m = malloc(len); - } while (sys_sched_getaffinity(0, len, m) == -EINVAL); + } while (sys_sched_getaffinity(0, len, m) == -1 && errno == EINVAL);

fd = open("/proc/uptime", O_RDONLY); assert(fd >= 0);

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit 5822e8cc84ee37338ab0bdc3124f6eec04dc232d ]

Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, it need be freed when module exiting, call put_device() to give up reference, so that it can be freed in kobject_cleanup() when the refcount hit to 0. The vpe_device is static, so remove kfree() from vpe_device_release().

Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/kernel/vpe-mt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/kernel/vpe-mt.c b/arch/mips/kernel/vpe-mt.c index 2e003b11a098..9fd7cd48ea1d 100644 --- a/arch/mips/kernel/vpe-mt.c +++ b/arch/mips/kernel/vpe-mt.c @@ -313,7 +313,6 @@ ATTRIBUTE_GROUPS(vpe);

static void vpe_device_release(struct device *cd) { - kfree(cd); }

static struct class vpe_class = { @@ -497,6 +496,7 @@ int __init vpe_module_init(void) device_del(&vpe_device);

out_class: + put_device(&vpe_device); class_unregister(&vpe_class);

out_chrdev: @@ -509,7 +509,7 @@ void __exit vpe_module_exit(void) { struct vpe *v, *n;

- device_del(&vpe_device); + device_unregister(&vpe_device); class_unregister(&vpe_class); unregister_chrdev(major, VPE_MODULE_NAME);

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit 110d7b0325c55ff3620073ba4201845f59e22ebf ]

After commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, move dev_set_name() after pnp_add_id() to avoid memory leak.

Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Reviewed-by: Hanjun Guo guohanjun@huawei.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pnp/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pnp/core.c b/drivers/pnp/core.c index 3bf18d718975..131b925b820d 100644 --- a/drivers/pnp/core.c +++ b/drivers/pnp/core.c @@ -160,14 +160,14 @@ struct pnp_dev *pnp_alloc_dev(struct pnp_protocol *protocol, int id, dev->dev.coherent_dma_mask = dev->dma_mask; dev->dev.release = &pnp_release_device;

- dev_set_name(&dev->dev, "%02x:%02x", dev->protocol->number, dev->number); - dev_id = pnp_add_id(dev, pnpid); if (!dev_id) { kfree(dev); return NULL; }

+ dev_set_name(&dev->dev, "%02x:%02x", dev->protocol->number, dev->number); + return dev; }

From: Shang XiaoJing shangxiaojing@huawei.com

[ Upstream commit f9ee20c85b3a3ba0afd3672630ec4f93d339f015 ]

gic_probe() calls pm_runtime_get_sync() and added fail path as rpm_put to put usage_counter. However, pm_runtime_get_sync() will increment usage_counter even it failed. Fix it by replacing it with pm_runtime_resume_and_get() to keep usage counter balanced.

Fixes: 9c8edddfc992 ("irqchip/gic: Add platform driver for non-root GICs that require RPM") Signed-off-by: Shang XiaoJing shangxiaojing@huawei.com Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20221124065150.22809-1-shangxiaojing@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/irqchip/irq-gic-pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-gic-pm.c b/drivers/irqchip/irq-gic-pm.c index ecafd295c31c..21c5decfc55b 100644 --- a/drivers/irqchip/irq-gic-pm.c +++ b/drivers/irqchip/irq-gic-pm.c @@ -112,7 +112,7 @@ static int gic_probe(struct platform_device *pdev)

pm_runtime_enable(dev);

- ret = pm_runtime_get_sync(dev); + ret = pm_runtime_resume_and_get(dev); if (ret < 0) goto rpm_disable;

From: Akinobu Mita akinobu.mita@gmail.com

[ Upstream commit 2e41f274f9aa71cdcc69dc1f26a3f9304a651804 ]

Patch series "fix error when writing negative value to simple attribute files".

The simple attribute files do not accept a negative value since the commit 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()"), but some attribute files want to accept a negative value.

This patch (of 3):

The simple attribute files do not accept a negative value since the commit 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()"), so we have to use a 64-bit value to write a negative value.

This adds DEFINE_SIMPLE_ATTRIBUTE_SIGNED for a signed value.

Link: https://lkml.kernel.org/r/20220919172418.45257-1-akinobu.mita@gmail.com Link: https://lkml.kernel.org/r/20220919172418.45257-2-akinobu.mita@gmail.com Fixes: 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()") Signed-off-by: Akinobu Mita akinobu.mita@gmail.com Reported-by: Zhao Gongyi zhaogongyi@huawei.com Reviewed-by: David Hildenbrand david@redhat.com Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Alexander Viro viro@zeniv.linux.org.uk Cc: Jonathan Corbet corbet@lwn.net Cc: Oscar Salvador osalvador@suse.de Cc: Rafael J. Wysocki rafael@kernel.org Cc: Shuah Khan shuah@kernel.org Cc: Wei Yongjun weiyongjun1@huawei.com Cc: Yicong Yang yangyicong@hisilicon.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/libfs.c | 22 +++++++++++++++++++--- include/linux/fs.h | 12 ++++++++++-- 2 files changed, 29 insertions(+), 5 deletions(-)

diff --git a/fs/libfs.c b/fs/libfs.c index be57e64834e5..fd5f6c106059 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -864,8 +864,8 @@ ssize_t simple_attr_read(struct file *file, char __user *buf, EXPORT_SYMBOL_GPL(simple_attr_read);

/* interpret the buffer as a number to call the set function with */ -ssize_t simple_attr_write(struct file *file, const char __user *buf, - size_t len, loff_t *ppos) +static ssize_t simple_attr_write_xsigned(struct file *file, const char __user *buf, + size_t len, loff_t *ppos, bool is_signed) { struct simple_attr *attr; unsigned long long val; @@ -886,7 +886,10 @@ ssize_t simple_attr_write(struct file *file, const char __user *buf, goto out;

attr->set_buf[size] = '\0'; - ret = kstrtoull(attr->set_buf, 0, &val); + if (is_signed) + ret = kstrtoll(attr->set_buf, 0, &val); + else + ret = kstrtoull(attr->set_buf, 0, &val); if (ret) goto out; ret = attr->set(attr->data, val); @@ -896,8 +899,21 @@ ssize_t simple_attr_write(struct file *file, const char __user *buf, mutex_unlock(&attr->mutex); return ret; } + +ssize_t simple_attr_write(struct file *file, const char __user *buf, + size_t len, loff_t *ppos) +{ + return simple_attr_write_xsigned(file, buf, len, ppos, false); +} EXPORT_SYMBOL_GPL(simple_attr_write);

+ssize_t simple_attr_write_signed(struct file *file, const char __user *buf, + size_t len, loff_t *ppos) +{ + return simple_attr_write_xsigned(file, buf, len, ppos, true); +} +EXPORT_SYMBOL_GPL(simple_attr_write_signed); + /** * generic_fh_to_dentry - generic helper for the fh_to_dentry export operation * @sb: filesystem to do the file handle conversion on diff --git a/include/linux/fs.h b/include/linux/fs.h index 86f884e78b6b..95b8ef09b76c 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -3353,7 +3353,7 @@ void simple_transaction_set(struct file *file, size_t n); * All attributes contain a text representation of a numeric value * that are accessed with the get() and set() functions. */ -#define DEFINE_SIMPLE_ATTRIBUTE(__fops, __get, __set, __fmt) \ +#define DEFINE_SIMPLE_ATTRIBUTE_XSIGNED(__fops, __get, __set, __fmt, __is_signed) \ static int __fops ## _open(struct inode *inode, struct file *file) \ { \ __simple_attr_check_format(__fmt, 0ull); \ @@ -3364,10 +3364,16 @@ static const struct file_operations __fops = { \ .open = __fops ## _open, \ .release = simple_attr_release, \ .read = simple_attr_read, \ - .write = simple_attr_write, \ + .write = (__is_signed) ? simple_attr_write_signed : simple_attr_write, \ .llseek = generic_file_llseek, \ }

+#define DEFINE_SIMPLE_ATTRIBUTE(__fops, __get, __set, __fmt) \ + DEFINE_SIMPLE_ATTRIBUTE_XSIGNED(__fops, __get, __set, __fmt, false) + +#define DEFINE_SIMPLE_ATTRIBUTE_SIGNED(__fops, __get, __set, __fmt) \ + DEFINE_SIMPLE_ATTRIBUTE_XSIGNED(__fops, __get, __set, __fmt, true) + static inline __printf(1, 2) void __simple_attr_check_format(const char *fmt, ...) { @@ -3382,6 +3388,8 @@ ssize_t simple_attr_read(struct file *file, char __user *buf, size_t len, loff_t *ppos); ssize_t simple_attr_write(struct file *file, const char __user *buf, size_t len, loff_t *ppos); +ssize_t simple_attr_write_signed(struct file *file, const char __user *buf, + size_t len, loff_t *ppos);

struct ctl_table; int proc_nr_files(struct ctl_table *table, int write,

From: Akinobu Mita akinobu.mita@gmail.com

[ Upstream commit d472cf797c4e268613dbce5ec9b95d0bcae19ecb ]

The simple attribute files do not accept a negative value since the commit 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()"), so we have to use a 64-bit value to write a negative value for a debugfs file created by debugfs_create_atomic_t().

This restores the previous behaviour by introducing DEFINE_DEBUGFS_ATTRIBUTE_SIGNED for a signed value.

Link: https://lkml.kernel.org/r/20220919172418.45257-4-akinobu.mita@gmail.com Fixes: 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()") Signed-off-by: Akinobu Mita akinobu.mita@gmail.com Reported-by: Zhao Gongyi zhaogongyi@huawei.com Reviewed-by: David Hildenbrand david@redhat.com Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Alexander Viro viro@zeniv.linux.org.uk Cc: Jonathan Corbet corbet@lwn.net Cc: Oscar Salvador osalvador@suse.de Cc: Rafael J. Wysocki rafael@kernel.org Cc: Shuah Khan shuah@kernel.org Cc: Wei Yongjun weiyongjun1@huawei.com Cc: Yicong Yang yangyicong@hisilicon.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../fault-injection/fault-injection.txt | 4 +-- fs/debugfs/file.c | 28 +++++++++++++++---- include/linux/debugfs.h | 19 +++++++++++-- 3 files changed, 41 insertions(+), 10 deletions(-)

diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt index 4d1b7b4ccfaf..b2b86147bafe 100644 --- a/Documentation/fault-injection/fault-injection.txt +++ b/Documentation/fault-injection/fault-injection.txt @@ -71,8 +71,8 @@ configuration of fault-injection capabilities.

- /sys/kernel/debug/fail*/times:

- specifies how many times failures may happen at most. - A value of -1 means "no limit". + specifies how many times failures may happen at most. A value of -1 + means "no limit".

- /sys/kernel/debug/fail*/space:

diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c index 4fce1da7db23..a57d080d2ba5 100644 --- a/fs/debugfs/file.c +++ b/fs/debugfs/file.c @@ -330,8 +330,8 @@ ssize_t debugfs_attr_read(struct file *file, char __user *buf, } EXPORT_SYMBOL_GPL(debugfs_attr_read);

-ssize_t debugfs_attr_write(struct file *file, const char __user *buf, - size_t len, loff_t *ppos) +static ssize_t debugfs_attr_write_xsigned(struct file *file, const char __user *buf, + size_t len, loff_t *ppos, bool is_signed) { struct dentry *dentry = F_DENTRY(file); ssize_t ret; @@ -339,12 +339,28 @@ ssize_t debugfs_attr_write(struct file *file, const char __user *buf, ret = debugfs_file_get(dentry); if (unlikely(ret)) return ret; - ret = simple_attr_write(file, buf, len, ppos); + if (is_signed) + ret = simple_attr_write_signed(file, buf, len, ppos); + else + ret = simple_attr_write(file, buf, len, ppos); debugfs_file_put(dentry); return ret; } + +ssize_t debugfs_attr_write(struct file *file, const char __user *buf, + size_t len, loff_t *ppos) +{ + return debugfs_attr_write_xsigned(file, buf, len, ppos, false); +} EXPORT_SYMBOL_GPL(debugfs_attr_write);

+ssize_t debugfs_attr_write_signed(struct file *file, const char __user *buf, + size_t len, loff_t *ppos) +{ + return debugfs_attr_write_xsigned(file, buf, len, ppos, true); +} +EXPORT_SYMBOL_GPL(debugfs_attr_write_signed); + static struct dentry *debugfs_create_mode_unsafe(const char *name, umode_t mode, struct dentry *parent, void *value, const struct file_operations *fops, @@ -742,11 +758,11 @@ static int debugfs_atomic_t_get(void *data, u64 *val) *val = atomic_read((atomic_t *)data); return 0; } -DEFINE_DEBUGFS_ATTRIBUTE(fops_atomic_t, debugfs_atomic_t_get, +DEFINE_DEBUGFS_ATTRIBUTE_SIGNED(fops_atomic_t, debugfs_atomic_t_get, debugfs_atomic_t_set, "%lld\n"); -DEFINE_DEBUGFS_ATTRIBUTE(fops_atomic_t_ro, debugfs_atomic_t_get, NULL, +DEFINE_DEBUGFS_ATTRIBUTE_SIGNED(fops_atomic_t_ro, debugfs_atomic_t_get, NULL, "%lld\n"); -DEFINE_DEBUGFS_ATTRIBUTE(fops_atomic_t_wo, NULL, debugfs_atomic_t_set, +DEFINE_DEBUGFS_ATTRIBUTE_SIGNED(fops_atomic_t_wo, NULL, debugfs_atomic_t_set, "%lld\n");

/** diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h index 2a4638bb4033..6ebc269e48ac 100644 --- a/include/linux/debugfs.h +++ b/include/linux/debugfs.h @@ -39,7 +39,7 @@ struct debugfs_regset32 {

extern struct dentry *arch_debugfs_dir;

-#define DEFINE_DEBUGFS_ATTRIBUTE(__fops, __get, __set, __fmt) \ +#define DEFINE_DEBUGFS_ATTRIBUTE_XSIGNED(__fops, __get, __set, __fmt, __is_signed) \ static int __fops ## _open(struct inode *inode, struct file *file) \ { \ __simple_attr_check_format(__fmt, 0ull); \ @@ -50,10 +50,16 @@ static const struct file_operations __fops = { \ .open = __fops ## _open, \ .release = simple_attr_release, \ .read = debugfs_attr_read, \ - .write = debugfs_attr_write, \ + .write = (__is_signed) ? debugfs_attr_write_signed : debugfs_attr_write, \ .llseek = no_llseek, \ }

+#define DEFINE_DEBUGFS_ATTRIBUTE(__fops, __get, __set, __fmt) \ + DEFINE_DEBUGFS_ATTRIBUTE_XSIGNED(__fops, __get, __set, __fmt, false) + +#define DEFINE_DEBUGFS_ATTRIBUTE_SIGNED(__fops, __get, __set, __fmt) \ + DEFINE_DEBUGFS_ATTRIBUTE_XSIGNED(__fops, __get, __set, __fmt, true) + typedef struct vfsmount *(*debugfs_automount_t)(struct dentry *, void *);

#if defined(CONFIG_DEBUG_FS) @@ -96,6 +102,8 @@ ssize_t debugfs_attr_read(struct file *file, char __user *buf, size_t len, loff_t *ppos); ssize_t debugfs_attr_write(struct file *file, const char __user *buf, size_t len, loff_t *ppos); +ssize_t debugfs_attr_write_signed(struct file *file, const char __user *buf, + size_t len, loff_t *ppos);

struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry, struct dentry *new_dir, const char *new_name); @@ -246,6 +254,13 @@ static inline ssize_t debugfs_attr_write(struct file *file, return -ENODEV; }

+static inline ssize_t debugfs_attr_write_signed(struct file *file, + const char __user *buf, + size_t len, loff_t *ppos) +{ + return -ENODEV; +} + static inline struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry, struct dentry *new_dir, char *new_name) {

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit e92a216d16bde65d21a3227e0fb2aa0794576525 ]

If device_register() returns error, the name allocated by dev_set_name() need be freed. It should use put_device() to give up the reference in the error path, so that the name can be freed in kobject_cleanup(), and list_del() is called to delete the port from rio_mports.

Link: https://lkml.kernel.org/r/20221114152636.2939035-3-yangyingliang@huawei.com Fixes: 2aaf308b95b2 ("rapidio: rework device hierarchy and introduce mport class of devices") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Cc: Alexandre Bounine alex.bou9@gmail.com Cc: Matt Porter mporter@kernel.crashing.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/rapidio/rio.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index 83406696c7aa..4304142d8700 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -2271,11 +2271,16 @@ int rio_register_mport(struct rio_mport *port) atomic_set(&port->state, RIO_DEVICE_RUNNING);

res = device_register(&port->dev); - if (res) + if (res) { dev_err(&port->dev, "RIO: mport%d registration failed ERR=%d\n", port->id, res); - else + mutex_lock(&rio_mport_list_lock); + list_del(&port->node); + mutex_unlock(&rio_mport_list_lock); + put_device(&port->dev); + } else { dev_dbg(&port->dev, "RIO: registered mport%d\n", port->id); + }

return res; }

From: Li Zetao lizetao1@huawei.com

[ Upstream commit 470188b09e92d83c5a997f25f0e8fb8cd2bc3469 ]

There is an use-after-free reported by KASAN:

BUG: KASAN: use-after-free in acpi_ut_remove_reference+0x3b/0x82 Read of size 1 at addr ffff888112afc460 by task modprobe/2111 CPU: 0 PID: 2111 Comm: modprobe Not tainted 6.1.0-rc7-dirty Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), Call Trace: <TASK> kasan_report+0xae/0xe0 acpi_ut_remove_reference+0x3b/0x82 acpi_ut_copy_iobject_to_iobject+0x3be/0x3d5 acpi_ds_store_object_to_local+0x15d/0x3a0 acpi_ex_store+0x78d/0x7fd acpi_ex_opcode_1A_1T_1R+0xbe4/0xf9b acpi_ps_parse_aml+0x217/0x8d5 ... </TASK>

The root cause of the problem is that the acpi_operand_object is freed when acpi_ut_walk_package_tree() fails in acpi_ut_copy_ipackage_to_ipackage(), lead to repeated release in acpi_ut_copy_iobject_to_iobject(). The problem was introduced by "8aa5e56eeb61" commit, this commit is to fix memory leak in acpi_ut_copy_iobject_to_iobject(), repeatedly adding remove operation, lead to "acpi_operand_object" used after free.

Fix it by removing acpi_ut_remove_reference() in acpi_ut_copy_ipackage_to_ipackage(). acpi_ut_copy_ipackage_to_ipackage() is called to copy an internal package object into another internal package object, when it fails, the memory of acpi_operand_object should be freed by the caller.

Fixes: 8aa5e56eeb61 ("ACPICA: Utilities: Fix memory leak in acpi_ut_copy_iobject_to_iobject") Signed-off-by: Li Zetao lizetao1@huawei.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/acpica/utcopy.c | 7 ------- 1 file changed, 7 deletions(-)

diff --git a/drivers/acpi/acpica/utcopy.c b/drivers/acpi/acpica/utcopy.c index a872ed7879ca..056c1741c1e3 100644 --- a/drivers/acpi/acpica/utcopy.c +++ b/drivers/acpi/acpica/utcopy.c @@ -916,13 +916,6 @@ acpi_ut_copy_ipackage_to_ipackage(union acpi_operand_object *source_obj, status = acpi_ut_walk_package_tree(source_obj, dest_obj, acpi_ut_copy_ielement_to_ielement, walk_state); - if (ACPI_FAILURE(status)) { - - /* On failure, delete the destination package object */ - - acpi_ut_remove_reference(dest_obj); - } - return_ACPI_STATUS(status); }

From: Juergen Gross jgross@suse.com

[ Upstream commit d04b1ae5a9b0c868dda8b4b34175ef08f3cb9e93 ]

xen_debug_interrupt() is specific to 2-level event handling. So don't register it with fifo event handling being active.

Signed-off-by: Juergen Gross jgross@suse.com Reviewed-by: Jan Beulich jbeulich@suse.com Link: https://lore.kernel.org/r/20201022094907.28560-4-jgross@suse.com Signed-off-by: Boris Ostrovsky boris.ostrovsky@oracle.com Stable-dep-of: 69143f60868b ("x86/xen: Fix memory leak in xen_smp_intr_init{_pv}()") Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/xen/smp.c | 19 +++++++++++-------- arch/x86/xen/xen-ops.h | 2 ++ drivers/xen/events/events_base.c | 10 ++++++---- 3 files changed, 19 insertions(+), 12 deletions(-)

diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 7a43b2ae19f1..63a3605b2225 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -88,14 +88,17 @@ int xen_smp_intr_init(unsigned int cpu) per_cpu(xen_callfunc_irq, cpu).irq = rc; per_cpu(xen_callfunc_irq, cpu).name = callfunc_name;

- debug_name = kasprintf(GFP_KERNEL, "debug%d", cpu); - rc = bind_virq_to_irqhandler(VIRQ_DEBUG, cpu, xen_debug_interrupt, - IRQF_PERCPU | IRQF_NOBALANCING, - debug_name, NULL); - if (rc < 0) - goto fail; - per_cpu(xen_debug_irq, cpu).irq = rc; - per_cpu(xen_debug_irq, cpu).name = debug_name; + if (!xen_fifo_events) { + debug_name = kasprintf(GFP_KERNEL, "debug%d", cpu); + rc = bind_virq_to_irqhandler(VIRQ_DEBUG, cpu, + xen_debug_interrupt, + IRQF_PERCPU | IRQF_NOBALANCING, + debug_name, NULL); + if (rc < 0) + goto fail; + per_cpu(xen_debug_irq, cpu).irq = rc; + per_cpu(xen_debug_irq, cpu).name = debug_name; + }

callfunc_name = kasprintf(GFP_KERNEL, "callfuncsingle%d", cpu); rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_SINGLE_VECTOR, diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 2f111f47ba98..9faec8543237 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -30,6 +30,8 @@ extern struct start_info *xen_start_info; extern struct shared_info xen_dummy_shared_info; extern struct shared_info *HYPERVISOR_shared_info;

+extern bool xen_fifo_events; + void xen_setup_mfn_list_list(void); void xen_build_mfn_list_list(void); void xen_setup_machphys_mapping(void); diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index d138027034fd..b6b3131cb079 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -2100,8 +2100,8 @@ void xen_callback_vector(void) void xen_callback_vector(void) {} #endif

-static bool fifo_events = true; -module_param(fifo_events, bool, 0); +bool xen_fifo_events = true; +module_param_named(fifo_events, xen_fifo_events, bool, 0);

static int xen_evtchn_cpu_prepare(unsigned int cpu) { @@ -2130,10 +2130,12 @@ void __init xen_init_IRQ(void) int ret = -EINVAL; unsigned int evtchn;

- if (fifo_events) + if (xen_fifo_events) ret = xen_evtchn_fifo_init(); - if (ret < 0) + if (ret < 0) { xen_evtchn_2l_init(); + xen_fifo_events = false; + }

xen_cpu_init_eoi(smp_processor_id());

From: Xiu Jianfeng xiujianfeng@huawei.com

[ Upstream commit ca84ce153d887b1dc8b118029976cc9faf2a9b40 ]

In xen_init_lock_cpu(), the @name has allocated new string by kasprintf(), if bind_ipi_to_irqhandler() fails, it should be freed, otherwise may lead to a memory leak issue, fix it.

Fixes: 2d9e1e2f58b5 ("xen: implement Xen-specific spinlocks") Signed-off-by: Xiu Jianfeng xiujianfeng@huawei.com Reviewed-by: Juergen Gross jgross@suse.com Link: https://lore.kernel.org/r/20221123155858.11382-3-xiujianfeng@huawei.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/xen/spinlock.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c index 6fffb86a32ad..e6cf1b430fd0 100644 --- a/arch/x86/xen/spinlock.c +++ b/arch/x86/xen/spinlock.c @@ -83,6 +83,7 @@ void xen_init_lock_cpu(int cpu) cpu, per_cpu(lock_kicker_irq, cpu));

name = kasprintf(GFP_KERNEL, "spinlock%d", cpu); + per_cpu(irq_name, cpu) = name; irq = bind_ipi_to_irqhandler(XEN_SPIN_UNLOCK_VECTOR, cpu, dummy_handler, @@ -93,7 +94,6 @@ void xen_init_lock_cpu(int cpu) if (irq >= 0) { disable_irq(irq); /* make sure it's never delivered */ per_cpu(lock_kicker_irq, cpu) = irq; - per_cpu(irq_name, cpu) = name; }

printk("cpu %d spinlock event irq %d\n", cpu, irq); @@ -106,6 +106,8 @@ void xen_uninit_lock_cpu(int cpu) if (!xen_pvspin) return;

+ kfree(per_cpu(irq_name, cpu)); + per_cpu(irq_name, cpu) = NULL; /* * When booting the kernel with 'mitigations=auto,nosmt', the secondary * CPUs are not activated, and lock_kicker_irq is not initialized. @@ -116,8 +118,6 @@ void xen_uninit_lock_cpu(int cpu)

unbind_from_irqhandler(irq, NULL); per_cpu(lock_kicker_irq, cpu) = -1; - kfree(per_cpu(irq_name, cpu)); - per_cpu(irq_name, cpu) = NULL; }

PV_CALLEE_SAVE_REGS_THUNK(xen_vcpu_stolen);

From: Ulf Hansson ulf.hansson@linaro.org

[ Upstream commit 5a2bd1b1c64e1ac5627db3767ac465f18606315c ]

When pm_runtime_no_callbacks() has been called for a struct device to set the dev->power.no_callbacks flag for it, it enables rpm_idle() to take a slightly quicker path by assuming that a ->runtime_idle() callback would have returned 0 to indicate success.

A device that does not have the dev->power.no_callbacks flag set for it, may still be missing a corresponding ->runtime_idle() callback, in which case the slower path in rpm_idle() is taken. Let's improve the behaviour for this case, by aligning code to the quicker path.

Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Acked-by: Alan Stern stern@rowland.harvard.edu Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Stable-dep-of: bc80c2e438dc ("PM: runtime: Do not call __rpm_callback() from rpm_idle()") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/base/power/runtime.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index eaae4adf9ce4..8a018e6d7976 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -403,7 +403,10 @@ static int rpm_idle(struct device *dev, int rpmflags) /* Pending requests need to be canceled. */ dev->power.request = RPM_REQ_NONE;

- if (dev->power.no_callbacks) + callback = RPM_GET_CALLBACK(dev, runtime_idle); + + /* If no callback assume success. */ + if (!callback || dev->power.no_callbacks) goto out;

/* Carry out an asynchronous or a synchronous idle notification. */ @@ -419,10 +422,7 @@ static int rpm_idle(struct device *dev, int rpmflags)

dev->power.idle_notification = true;

- callback = RPM_GET_CALLBACK(dev, runtime_idle); - - if (callback) - retval = __rpm_callback(callback, dev); + retval = __rpm_callback(callback, dev);

dev->power.idle_notification = false; wake_up_all(&dev->power.wait_queue);

From: Yu Liao liaoyu15@huawei.com

[ Upstream commit 727cc0147f5066e359aca65cc6cc5e6d64cc15d8 ]

The ACPI buffer memory (out.pointer) returned by wmi_evaluate_method() is not freed after the call, so it leads to memory leak.

The method results in ACPI buffer is not used, so just pass NULL to wmi_evaluate_method() which fixes the memory leak.

Fixes: 99b38b4acc0d ("platform/x86: add MXM WMI driver.") Signed-off-by: Yu Liao liaoyu15@huawei.com Link: https://lore.kernel.org/r/20221129011101.2042315-1-liaoyu15@huawei.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/mxm-wmi.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/platform/x86/mxm-wmi.c b/drivers/platform/x86/mxm-wmi.c index 35d8b9a939f9..9c1893a703e6 100644 --- a/drivers/platform/x86/mxm-wmi.c +++ b/drivers/platform/x86/mxm-wmi.c @@ -48,13 +48,11 @@ int mxm_wmi_call_mxds(int adapter) .xarg = 1, }; struct acpi_buffer input = { (acpi_size)sizeof(args), &args }; - struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; acpi_status status;

printk("calling mux switch %d\n", adapter);

- status = wmi_evaluate_method(MXM_WMMX_GUID, 0x0, adapter, &input, - &output); + status = wmi_evaluate_method(MXM_WMMX_GUID, 0x0, adapter, &input, NULL);

if (ACPI_FAILURE(status)) return status; @@ -73,13 +71,11 @@ int mxm_wmi_call_mxmx(int adapter) .xarg = 1, }; struct acpi_buffer input = { (acpi_size)sizeof(args), &args }; - struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; acpi_status status;

printk("calling mux switch %d\n", adapter);

- status = wmi_evaluate_method(MXM_WMMX_GUID, 0x0, adapter, &input, - &output); + status = wmi_evaluate_method(MXM_WMMX_GUID, 0x0, adapter, &input, NULL);

if (ACPI_FAILURE(status)) return status;

From: Chen Zhongjin chenzhongjin@huawei.com

[ Upstream commit e0c49bd2b4d3cd1751491eb2d940bce968ac65e9 ]

sysv_nblocks() returns 'blocks' rather than 'res', which only counting the number of triple-indirect blocks and causing sysv_getattr() gets a wrong result.

[AV: this is actually a sysv counterpart of minixfs fix - 0fcd426de9d0 "[PATCH] minix block usage counting fix" in historical tree; mea culpa, should've thought to check fs/sysv back then...]

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Chen Zhongjin chenzhongjin@huawei.com Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/sysv/itree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/sysv/itree.c b/fs/sysv/itree.c index bcb67b0cabe7..31f66053e239 100644 --- a/fs/sysv/itree.c +++ b/fs/sysv/itree.c @@ -438,7 +438,7 @@ static unsigned sysv_nblocks(struct super_block *s, loff_t size) res += blocks; direct = 1; } - return blocks; + return res; }

int sysv_getattr(const struct path *path, struct kstat *stat,

From: Zhang Qilong zhangqilong3@huawei.com

[ Upstream commit fd4e60bf0ef8eb9edcfa12dda39e8b6ee9060492 ]

Commit ee62c6b2dc93 ("eventfd: change int to __u64 in eventfd_signal()") forgot to change int to __u64 in the CONFIG_EVENTFD=n stub function.

Link: https://lkml.kernel.org/r/20221124140154.104680-1-zhangqilong3@huawei.com Fixes: ee62c6b2dc93 ("eventfd: change int to __u64 in eventfd_signal()") Signed-off-by: Zhang Qilong zhangqilong3@huawei.com Cc: Dylan Yudaken dylany@fb.com Cc: Jens Axboe axboe@kernel.dk Cc: Sha Zhengju handai.szj@taobao.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/eventfd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h index dc4fd8a6644d..3482f9365a4d 100644 --- a/include/linux/eventfd.h +++ b/include/linux/eventfd.h @@ -61,7 +61,7 @@ static inline struct eventfd_ctx *eventfd_ctx_fdget(int fd) return ERR_PTR(-ENOSYS); }

-static inline int eventfd_signal(struct eventfd_ctx *ctx, int n) +static inline int eventfd_signal(struct eventfd_ctx *ctx, __u64 n) { return -ENOSYS; }

From: ZhangPeng zhangpeng362@huawei.com

[ Upstream commit c53ed55cb275344086e32a7080a6b19cb183650b ]

Syzbot reported a OOB Write bug:

loop0: detected capacity change from 0 to 64 ================================================================== BUG: KASAN: slab-out-of-bounds in hfs_asc2mac+0x467/0x9a0 fs/hfs/trans.c:133 Write of size 1 at addr ffff88801848314e by task syz-executor391/3632

Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284 print_report+0x107/0x1f0 mm/kasan/report.c:395 kasan_report+0xcd/0x100 mm/kasan/report.c:495 hfs_asc2mac+0x467/0x9a0 fs/hfs/trans.c:133 hfs_cat_build_key+0x92/0x170 fs/hfs/catalog.c:28 hfs_lookup+0x1ab/0x2c0 fs/hfs/dir.c:31 lookup_open fs/namei.c:3391 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x10e6/0x2df0 fs/namei.c:3710 do_filp_open+0x264/0x4f0 fs/namei.c:3740

If in->len is much larger than HFS_NAMELEN(31) which is the maximum length of an HFS filename, a OOB write could occur in hfs_asc2mac(). In that case, when the dst reaches the boundary, the srclen is still greater than 0, which causes a OOB write. Fix this by adding a check on dstlen in while() before writing to dst address.

Link: https://lkml.kernel.org/r/20221202030038.1391945-1-zhangpeng362@huawei.com Fixes: 328b92278650 ("[PATCH] hfs: NLS support") Signed-off-by: ZhangPeng zhangpeng362@huawei.com Reviewed-by: Viacheslav Dubeyko slava@dubeyko.com Reported-by: syzbot+dc3b1cf9111ab5fe98e7@syzkaller.appspotmail.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/hfs/trans.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/hfs/trans.c b/fs/hfs/trans.c index 39f5e343bf4d..fdb0edb8a607 100644 --- a/fs/hfs/trans.c +++ b/fs/hfs/trans.c @@ -109,7 +109,7 @@ void hfs_asc2mac(struct super_block *sb, struct hfs_name *out, const struct qstr if (nls_io) { wchar_t ch;

- while (srclen > 0) { + while (srclen > 0 && dstlen > 0) { size = nls_io->char2uni(src, srclen, &ch); if (size < 0) { ch = '?';

From: Fedor Pchelkin pchelkin@ispras.ru

[ Upstream commit c2a94de38c74e86f49124ac14f093d6a5c377a90 ]

Syzkaller reports a long-known leak of urbs in ath9k_hif_usb_dealloc_tx_urbs().

The cause of the leak is that usb_get_urb() is called but usb_free_urb() (or usb_put_urb()) is not called inside usb_kill_urb() as urb->dev or urb->ep fields have not been initialized and usb_kill_urb() returns immediately.

The patch removes trying to kill urbs located in hif_dev->tx.tx_buf because hif_dev->tx.tx_buf is not supposed to contain urbs which are in pending state (the pending urbs are stored in hif_dev->tx.tx_pending). The tx.tx_lock is acquired so there should not be any changes in the list.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 03fb92a432ea ("ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()") Signed-off-by: Fedor Pchelkin pchelkin@ispras.ru Signed-off-by: Alexey Khoroshilov khoroshilov@ispras.ru Acked-by: Toke Høiland-Jørgensen toke@toke.dk Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20220725151359.283704-1-pchelkin@ispras.ru Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath9k/hif_usb.c | 4 ---- 1 file changed, 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index c8c7afe0e343..4290753a2002 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -781,14 +781,10 @@ static void ath9k_hif_usb_dealloc_tx_urbs(struct hif_device_usb *hif_dev) spin_lock_irqsave(&hif_dev->tx.tx_lock, flags); list_for_each_entry_safe(tx_buf, tx_buf_tmp, &hif_dev->tx.tx_buf, list) { - usb_get_urb(tx_buf->urb); - spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags); - usb_kill_urb(tx_buf->urb); list_del(&tx_buf->list); usb_free_urb(tx_buf->urb); kfree(tx_buf->buf); kfree(tx_buf); - spin_lock_irqsave(&hif_dev->tx.tx_lock, flags); } spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);

From: Bitterblue Smith rtl8821cerfe2@gmail.com

[ Upstream commit 6f103aeb5e985ac08f3a4a049a2c17294f40cff9 ]

The wifi + bluetooth combo chips (RTL8723AU and RTL8723BU) read the chip vendor from the wrong register because the val32 variable gets overwritten. Add one more variable to avoid this.

This had no real effect on RTL8723BU. It may have had an effect on RTL8723AU.

Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)") Signed-off-by: Bitterblue Smith rtl8821cerfe2@gmail.com Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/24af8024-2f07-552b-93d8-38823d8e3cb0@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 38f06ee98b35..fb8545f79fa6 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -1614,18 +1614,18 @@ static void rtl8xxxu_print_chipinfo(struct rtl8xxxu_priv *priv) static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) { struct device *dev = &priv->udev->dev; - u32 val32, bonding; + u32 val32, bonding, sys_cfg; u16 val16;

- val32 = rtl8xxxu_read32(priv, REG_SYS_CFG); - priv->chip_cut = (val32 & SYS_CFG_CHIP_VERSION_MASK) >> + sys_cfg = rtl8xxxu_read32(priv, REG_SYS_CFG); + priv->chip_cut = (sys_cfg & SYS_CFG_CHIP_VERSION_MASK) >> SYS_CFG_CHIP_VERSION_SHIFT; - if (val32 & SYS_CFG_TRP_VAUX_EN) { + if (sys_cfg & SYS_CFG_TRP_VAUX_EN) { dev_info(dev, "Unsupported test chip\n"); return -ENOTSUPP; }

- if (val32 & SYS_CFG_BT_FUNC) { + if (sys_cfg & SYS_CFG_BT_FUNC) { if (priv->chip_cut >= 3) { sprintf(priv->chip_name, "8723BU"); priv->rtl_chip = RTL8723B; @@ -1647,7 +1647,7 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) if (val32 & MULTI_GPS_FUNC_EN) priv->has_gps = 1; priv->is_multi_func = 1; - } else if (val32 & SYS_CFG_TYPE_ID) { + } else if (sys_cfg & SYS_CFG_TYPE_ID) { bonding = rtl8xxxu_read32(priv, REG_HPON_FSM); bonding &= HPON_FSM_BONDING_MASK; if (priv->fops->tx_desc_size == @@ -1695,7 +1695,7 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) case RTL8188E: case RTL8192E: case RTL8723B: - switch (val32 & SYS_CFG_VENDOR_EXT_MASK) { + switch (sys_cfg & SYS_CFG_VENDOR_EXT_MASK) { case SYS_CFG_VENDOR_ID_TSMC: sprintf(priv->chip_vendor, "TSMC"); break; @@ -1712,7 +1712,7 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) } break; default: - if (val32 & SYS_CFG_VENDOR_ID) { + if (sys_cfg & SYS_CFG_VENDOR_ID) { sprintf(priv->chip_vendor, "UMC"); priv->vendor_umc = 1; } else {

From: Ricardo Ribalda ribalda@chromium.org

[ Upstream commit 9fce241660f37d9e95e93c0ae6fba8cfefa5797b ]

Error path seems to be swaped. Fix the order and provide some meaningful names.

Fixes: bee3d5115611 ("[media] ad5820: Add driver for auto-focus coil") Signed-off-by: Ricardo Ribalda ribalda@chromium.org Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/i2c/ad5820.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/media/i2c/ad5820.c b/drivers/media/i2c/ad5820.c index 034ebf754007..c2a6d1d5217a 100644 --- a/drivers/media/i2c/ad5820.c +++ b/drivers/media/i2c/ad5820.c @@ -321,18 +321,18 @@ static int ad5820_probe(struct i2c_client *client,

ret = media_entity_pads_init(&coil->subdev.entity, 0, NULL); if (ret < 0) - goto cleanup2; + goto clean_mutex;

ret = v4l2_async_register_subdev(&coil->subdev); if (ret < 0) - goto cleanup; + goto clean_entity;

return ret;

-cleanup2: - mutex_destroy(&coil->power_lock); -cleanup: +clean_entity: media_entity_cleanup(&coil->subdev.entity); +clean_mutex: + mutex_destroy(&coil->power_lock); return ret; }

From: Jimmy Assarsson extja@kvaser.com

[ Upstream commit 35364f5b41a4917fe94a3f393d149b63ec583297 ]

Use the CMD_GET_CAPABILITIES_REQ command to query the device for certain capabilities. We are only interested in LISTENONLY mode and wither the device reports CAN error counters.

Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Reported-by: Anssi Hannula anssi.hannula@bitwise.fi Tested-by: Anssi Hannula anssi.hannula@bitwise.fi Signed-off-by: Jimmy Assarsson extja@kvaser.com Link: https://lore.kernel.org/all/20221010185237.319219-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 144 +++++++++++++++++- 1 file changed, 143 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c index 15380cc08ee6..26f32828f905 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c @@ -73,6 +73,8 @@ #define CMD_TX_ACKNOWLEDGE 50 #define CMD_CAN_ERROR_EVENT 51 #define CMD_FLUSH_QUEUE_REPLY 68 +#define CMD_GET_CAPABILITIES_REQ 95 +#define CMD_GET_CAPABILITIES_RESP 96

#define CMD_LEAF_LOG_MESSAGE 106

@@ -82,6 +84,8 @@ #define KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK BIT(5) #define KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK BIT(6)

+#define KVASER_USB_LEAF_SWOPTION_EXT_CAP BIT(12) + /* error factors */ #define M16C_EF_ACKE BIT(0) #define M16C_EF_CRCE BIT(1) @@ -277,6 +281,28 @@ struct leaf_cmd_log_message { u8 data[8]; } __packed;

+/* Sub commands for cap_req and cap_res */ +#define KVASER_USB_LEAF_CAP_CMD_LISTEN_MODE 0x02 +#define KVASER_USB_LEAF_CAP_CMD_ERR_REPORT 0x05 +struct kvaser_cmd_cap_req { + __le16 padding0; + __le16 cap_cmd; + __le16 padding1; + __le16 channel; +} __packed; + +/* Status codes for cap_res */ +#define KVASER_USB_LEAF_CAP_STAT_OK 0x00 +#define KVASER_USB_LEAF_CAP_STAT_NOT_IMPL 0x01 +#define KVASER_USB_LEAF_CAP_STAT_UNAVAIL 0x02 +struct kvaser_cmd_cap_res { + __le16 padding; + __le16 cap_cmd; + __le16 status; + __le32 mask; + __le32 value; +} __packed; + struct kvaser_cmd { u8 len; u8 id; @@ -294,6 +320,8 @@ struct kvaser_cmd { struct leaf_cmd_chip_state_event chip_state_event; struct leaf_cmd_error_event error_event; struct leaf_cmd_log_message log_message; + struct kvaser_cmd_cap_req cap_req; + struct kvaser_cmd_cap_res cap_res; } __packed leaf;

union { @@ -323,6 +351,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_leaf[] = { [CMD_LEAF_LOG_MESSAGE] = kvaser_fsize(u.leaf.log_message), [CMD_CHIP_STATE_EVENT] = kvaser_fsize(u.leaf.chip_state_event), [CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.leaf.error_event), + [CMD_GET_CAPABILITIES_RESP] = kvaser_fsize(u.leaf.cap_res), /* ignored events: */ [CMD_FLUSH_QUEUE_REPLY] = CMD_SIZE_ANY, }; @@ -607,6 +636,9 @@ static void kvaser_usb_leaf_get_software_info_leaf(struct kvaser_usb *dev, dev->fw_version = le32_to_cpu(softinfo->fw_version); dev->max_tx_urbs = le16_to_cpu(softinfo->max_outstanding_tx);

+ if (sw_options & KVASER_USB_LEAF_SWOPTION_EXT_CAP) + dev->card_data.capabilities |= KVASER_USB_CAP_EXT_CAP; + if (dev->driver_info->quirks & KVASER_USB_QUIRK_IGNORE_CLK_FREQ) { /* Firmware expects bittiming parameters calculated for 16MHz * clock, regardless of the actual clock @@ -694,6 +726,116 @@ static int kvaser_usb_leaf_get_card_info(struct kvaser_usb *dev) return 0; }

+static int kvaser_usb_leaf_get_single_capability(struct kvaser_usb *dev, + u16 cap_cmd_req, u16 *status) +{ + struct kvaser_usb_dev_card_data *card_data = &dev->card_data; + struct kvaser_cmd *cmd; + u32 value = 0; + u32 mask = 0; + u16 cap_cmd_res; + int err; + int i; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->id = CMD_GET_CAPABILITIES_REQ; + cmd->u.leaf.cap_req.cap_cmd = cpu_to_le16(cap_cmd_req); + cmd->len = CMD_HEADER_LEN + sizeof(struct kvaser_cmd_cap_req); + + err = kvaser_usb_send_cmd(dev, cmd, cmd->len); + if (err) + goto end; + + err = kvaser_usb_leaf_wait_cmd(dev, CMD_GET_CAPABILITIES_RESP, cmd); + if (err) + goto end; + + *status = le16_to_cpu(cmd->u.leaf.cap_res.status); + + if (*status != KVASER_USB_LEAF_CAP_STAT_OK) + goto end; + + cap_cmd_res = le16_to_cpu(cmd->u.leaf.cap_res.cap_cmd); + switch (cap_cmd_res) { + case KVASER_USB_LEAF_CAP_CMD_LISTEN_MODE: + case KVASER_USB_LEAF_CAP_CMD_ERR_REPORT: + value = le32_to_cpu(cmd->u.leaf.cap_res.value); + mask = le32_to_cpu(cmd->u.leaf.cap_res.mask); + break; + default: + dev_warn(&dev->intf->dev, "Unknown capability command %u\n", + cap_cmd_res); + break; + } + + for (i = 0; i < dev->nchannels; i++) { + if (BIT(i) & (value & mask)) { + switch (cap_cmd_res) { + case KVASER_USB_LEAF_CAP_CMD_LISTEN_MODE: + card_data->ctrlmode_supported |= + CAN_CTRLMODE_LISTENONLY; + break; + case KVASER_USB_LEAF_CAP_CMD_ERR_REPORT: + card_data->capabilities |= + KVASER_USB_CAP_BERR_CAP; + break; + } + } + } + +end: + kfree(cmd); + + return err; +} + +static int kvaser_usb_leaf_get_capabilities_leaf(struct kvaser_usb *dev) +{ + int err; + u16 status; + + if (!(dev->card_data.capabilities & KVASER_USB_CAP_EXT_CAP)) { + dev_info(&dev->intf->dev, + "No extended capability support. Upgrade device firmware.\n"); + return 0; + } + + err = kvaser_usb_leaf_get_single_capability(dev, + KVASER_USB_LEAF_CAP_CMD_LISTEN_MODE, + &status); + if (err) + return err; + if (status) + dev_info(&dev->intf->dev, + "KVASER_USB_LEAF_CAP_CMD_LISTEN_MODE failed %u\n", + status); + + err = kvaser_usb_leaf_get_single_capability(dev, + KVASER_USB_LEAF_CAP_CMD_ERR_REPORT, + &status); + if (err) + return err; + if (status) + dev_info(&dev->intf->dev, + "KVASER_USB_LEAF_CAP_CMD_ERR_REPORT failed %u\n", + status); + + return 0; +} + +static int kvaser_usb_leaf_get_capabilities(struct kvaser_usb *dev) +{ + int err = 0; + + if (dev->driver_info->family == KVASER_LEAF) + err = kvaser_usb_leaf_get_capabilities_leaf(dev); + + return err; +} + static void kvaser_usb_leaf_tx_acknowledge(const struct kvaser_usb *dev, const struct kvaser_cmd *cmd) { @@ -1490,7 +1632,7 @@ const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops = { .dev_get_software_info = kvaser_usb_leaf_get_software_info, .dev_get_software_details = NULL, .dev_get_card_info = kvaser_usb_leaf_get_card_info, - .dev_get_capabilities = NULL, + .dev_get_capabilities = kvaser_usb_leaf_get_capabilities, .dev_set_opt_mode = kvaser_usb_leaf_set_opt_mode, .dev_start_chip = kvaser_usb_leaf_start_chip, .dev_stop_chip = kvaser_usb_leaf_stop_chip,

From: Jimmy Assarsson extja@kvaser.com

[ Upstream commit b24cb2d169e0c9dce664a959e1f2aa9781285dc9 ]

The device will send an error event command, to indicate certain errors. This indicates a misbehaving driver, and should never occur.

Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Anssi Hannula anssi.hannula@bitwise.fi Co-developed-by: Anssi Hannula anssi.hannula@bitwise.fi Signed-off-by: Anssi Hannula anssi.hannula@bitwise.fi Signed-off-by: Jimmy Assarsson extja@kvaser.com Link: https://lore.kernel.org/all/20221010185237.319219-5-extja@kvaser.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 99 +++++++++++++++++++ 1 file changed, 99 insertions(+)

diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c index 4f3d1150b2b2..3c3e78992b55 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c @@ -69,6 +69,7 @@ #define CMD_GET_CARD_INFO_REPLY 35 #define CMD_GET_SOFTWARE_INFO 38 #define CMD_GET_SOFTWARE_INFO_REPLY 39 +#define CMD_ERROR_EVENT 45 #define CMD_FLUSH_QUEUE 48 #define CMD_TX_ACKNOWLEDGE 50 #define CMD_CAN_ERROR_EVENT 51 @@ -257,6 +258,28 @@ struct usbcan_cmd_can_error_event { __le16 time; } __packed;

+/* CMD_ERROR_EVENT error codes */ +#define KVASER_USB_LEAF_ERROR_EVENT_TX_QUEUE_FULL 0x8 +#define KVASER_USB_LEAF_ERROR_EVENT_PARAM 0x9 + +struct leaf_cmd_error_event { + u8 tid; + u8 error_code; + __le16 timestamp[3]; + __le16 padding; + __le16 info1; + __le16 info2; +} __packed; + +struct usbcan_cmd_error_event { + u8 tid; + u8 error_code; + __le16 info1; + __le16 info2; + __le16 timestamp; + __le16 padding; +} __packed; + struct kvaser_cmd_ctrl_mode { u8 tid; u8 channel; @@ -320,6 +343,7 @@ struct kvaser_cmd { struct leaf_cmd_chip_state_event chip_state_event; struct leaf_cmd_can_error_event can_error_event; struct leaf_cmd_log_message log_message; + struct leaf_cmd_error_event error_event; struct kvaser_cmd_cap_req cap_req; struct kvaser_cmd_cap_res cap_res; } __packed leaf; @@ -329,6 +353,7 @@ struct kvaser_cmd { struct usbcan_cmd_rx_can rx_can; struct usbcan_cmd_chip_state_event chip_state_event; struct usbcan_cmd_can_error_event can_error_event; + struct usbcan_cmd_error_event error_event; } __packed usbcan;

struct kvaser_cmd_tx_can tx_can; @@ -352,6 +377,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_leaf[] = { [CMD_CHIP_STATE_EVENT] = kvaser_fsize(u.leaf.chip_state_event), [CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.leaf.can_error_event), [CMD_GET_CAPABILITIES_RESP] = kvaser_fsize(u.leaf.cap_res), + [CMD_ERROR_EVENT] = kvaser_fsize(u.leaf.error_event), /* ignored events: */ [CMD_FLUSH_QUEUE_REPLY] = CMD_SIZE_ANY, }; @@ -366,6 +392,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_usbcan[] = { [CMD_RX_EXT_MESSAGE] = kvaser_fsize(u.usbcan.rx_can), [CMD_CHIP_STATE_EVENT] = kvaser_fsize(u.usbcan.chip_state_event), [CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.usbcan.can_error_event), + [CMD_ERROR_EVENT] = kvaser_fsize(u.usbcan.error_event), /* ignored events: */ [CMD_USBCAN_CLOCK_OVERFLOW_EVENT] = CMD_SIZE_ANY, }; @@ -1308,6 +1335,74 @@ static void kvaser_usb_leaf_rx_can_msg(const struct kvaser_usb *dev, netif_rx(skb); }

+static void kvaser_usb_leaf_error_event_parameter(const struct kvaser_usb *dev, + const struct kvaser_cmd *cmd) +{ + u16 info1 = 0; + + switch (dev->driver_info->family) { + case KVASER_LEAF: + info1 = le16_to_cpu(cmd->u.leaf.error_event.info1); + break; + case KVASER_USBCAN: + info1 = le16_to_cpu(cmd->u.usbcan.error_event.info1); + break; + } + + /* info1 will contain the offending cmd_no */ + switch (info1) { + case CMD_SET_CTRL_MODE: + dev_warn(&dev->intf->dev, + "CMD_SET_CTRL_MODE error in parameter\n"); + break; + + case CMD_SET_BUS_PARAMS: + dev_warn(&dev->intf->dev, + "CMD_SET_BUS_PARAMS error in parameter\n"); + break; + + default: + dev_warn(&dev->intf->dev, + "Unhandled parameter error event cmd_no (%u)\n", + info1); + break; + } +} + +static void kvaser_usb_leaf_error_event(const struct kvaser_usb *dev, + const struct kvaser_cmd *cmd) +{ + u8 error_code = 0; + + switch (dev->driver_info->family) { + case KVASER_LEAF: + error_code = cmd->u.leaf.error_event.error_code; + break; + case KVASER_USBCAN: + error_code = cmd->u.usbcan.error_event.error_code; + break; + } + + switch (error_code) { + case KVASER_USB_LEAF_ERROR_EVENT_TX_QUEUE_FULL: + /* Received additional CAN message, when firmware TX queue is + * already full. Something is wrong with the driver. + * This should never happen! + */ + dev_err(&dev->intf->dev, + "Received error event TX_QUEUE_FULL\n"); + break; + case KVASER_USB_LEAF_ERROR_EVENT_PARAM: + kvaser_usb_leaf_error_event_parameter(dev, cmd); + break; + + default: + dev_warn(&dev->intf->dev, + "Unhandled error event (%d)\n", error_code); + break; + } +} + static void kvaser_usb_leaf_start_chip_reply(const struct kvaser_usb *dev, const struct kvaser_cmd *cmd) { @@ -1386,6 +1481,10 @@ static void kvaser_usb_leaf_handle_command(const struct kvaser_usb *dev, kvaser_usb_leaf_tx_acknowledge(dev, cmd); break;

+ case CMD_ERROR_EVENT: + kvaser_usb_leaf_error_event(dev, cmd); + break; + /* Ignored commands */ case CMD_USBCAN_CLOCK_OVERFLOW_EVENT: if (dev->driver_info->family != KVASER_USBCAN)

From: Anssi Hannula anssi.hannula@bitwise.fi

[ Upstream commit 8d21f5927ae604881f98587fabf6753f88730968 ]

The tested 0bfd:0017 Kvaser Memorator Professional HS/HS FW 2.0.50 and 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 do not seem to send any unsolicited events when error counters decrease or when the device transitions from ERROR_PASSIVE to ERROR_ACTIVE (or WARNING).

This causes the interface to e.g. indefinitely stay in the ERROR_PASSIVE state.

Fix that by asking for chip state (inc. counters) event every 0.5 secs when error counters are non-zero.

Since there are non-error-counter devices, also always poll in ERROR_PASSIVE even if the counters show zero.

Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson extja@kvaser.com Signed-off-by: Anssi Hannula anssi.hannula@bitwise.fi Signed-off-by: Jimmy Assarsson extja@kvaser.com Link: https://lore.kernel.org/all/20221010185237.319219-7-extja@kvaser.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 7 +++ .../net/can/usb/kvaser_usb/kvaser_usb_core.c | 19 +++++- .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 58 +++++++++++++++++++ 3 files changed, 81 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h index 62958f04a2f2..1f4583f1dae2 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h @@ -104,6 +104,9 @@ struct kvaser_usb_net_priv { struct can_priv can; struct can_berr_counter bec;

+ /* subdriver-specific data */ + void *sub_priv; + struct kvaser_usb *dev; struct net_device *netdev; int channel; @@ -125,6 +128,8 @@ struct kvaser_usb_net_priv { * * @dev_setup_endpoints: setup USB in and out endpoints * @dev_init_card: initialize card + * @dev_init_channel: initialize channel + * @dev_remove_channel: uninitialize channel * @dev_get_software_info: get software info * @dev_get_software_details: get software details * @dev_get_card_info: get card info @@ -146,6 +151,8 @@ struct kvaser_usb_dev_ops { struct can_berr_counter *bec); int (*dev_setup_endpoints)(struct kvaser_usb *dev); int (*dev_init_card)(struct kvaser_usb *dev); + int (*dev_init_channel)(struct kvaser_usb_net_priv *priv); + void (*dev_remove_channel)(struct kvaser_usb_net_priv *priv); int (*dev_get_software_info)(struct kvaser_usb *dev); int (*dev_get_software_details)(struct kvaser_usb *dev); int (*dev_get_card_info)(struct kvaser_usb *dev); diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c index 379df22d5123..e00afb94ec6c 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c @@ -645,6 +645,7 @@ static const struct net_device_ops kvaser_usb_netdev_ops = {

static void kvaser_usb_remove_interfaces(struct kvaser_usb *dev) { + const struct kvaser_usb_dev_ops *ops = dev->driver_info->ops; int i;

for (i = 0; i < dev->nchannels; i++) { @@ -660,6 +661,9 @@ static void kvaser_usb_remove_interfaces(struct kvaser_usb *dev) if (!dev->nets[i]) continue;

+ if (ops->dev_remove_channel) + ops->dev_remove_channel(dev->nets[i]); + free_candev(dev->nets[i]->netdev); } } @@ -728,17 +732,26 @@ static int kvaser_usb_init_one(struct kvaser_usb *dev, int channel)

dev->nets[channel] = priv;

+ if (ops->dev_init_channel) { + err = ops->dev_init_channel(priv); + if (err) + goto err; + } + err = register_candev(netdev); if (err) { dev_err(&dev->intf->dev, "Failed to register CAN device\n"); - free_candev(netdev); - dev->nets[channel] = NULL; - return err; + goto err; }

netdev_dbg(netdev, "device registered\n");

return 0; + +err: + free_candev(netdev); + dev->nets[channel] = NULL; + return err; }

static int kvaser_usb_probe(struct usb_interface *intf, diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c index b43631eaccf1..6d45ae6f2a08 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c @@ -20,6 +20,7 @@ #include <linux/string.h> #include <linux/types.h> #include <linux/usb.h> +#include <linux/workqueue.h>

#include <linux/can.h> #include <linux/can/dev.h> @@ -55,6 +56,7 @@ #define CMD_RX_EXT_MESSAGE 14 #define CMD_TX_EXT_MESSAGE 15 #define CMD_SET_BUS_PARAMS 16 +#define CMD_GET_CHIP_STATE 19 #define CMD_CHIP_STATE_EVENT 20 #define CMD_SET_CTRL_MODE 21 #define CMD_RESET_CHIP 24 @@ -420,6 +422,12 @@ struct kvaser_usb_err_summary { }; };

+struct kvaser_usb_net_leaf_priv { + struct kvaser_usb_net_priv *net; + + struct delayed_work chip_state_req_work; +}; + static const struct can_bittiming_const kvaser_usb_leaf_m16c_bittiming_const = { .name = "kvaser_usb_ucii", .tseg1_min = 4, @@ -947,6 +955,16 @@ static int kvaser_usb_leaf_simple_cmd_async(struct kvaser_usb_net_priv *priv, return err; }

+static void kvaser_usb_leaf_chip_state_req_work(struct work_struct *work) +{ + struct kvaser_usb_net_leaf_priv *leaf = + container_of(work, struct kvaser_usb_net_leaf_priv, + chip_state_req_work.work); + struct kvaser_usb_net_priv *priv = leaf->net; + + kvaser_usb_leaf_simple_cmd_async(priv, CMD_GET_CHIP_STATE); +} + static void kvaser_usb_leaf_rx_error_update_can_state(struct kvaser_usb_net_priv *priv, const struct kvaser_usb_err_summary *es, @@ -1018,6 +1036,7 @@ static void kvaser_usb_leaf_rx_error(const struct kvaser_usb *dev, struct sk_buff *skb; struct net_device_stats *stats; struct kvaser_usb_net_priv *priv; + struct kvaser_usb_net_leaf_priv *leaf; enum can_state old_state, new_state;

if (es->channel >= dev->nchannels) { @@ -1027,6 +1046,7 @@ static void kvaser_usb_leaf_rx_error(const struct kvaser_usb *dev, }

priv = dev->nets[es->channel]; + leaf = priv->sub_priv; stats = &priv->netdev->stats;

/* Update all of the CAN interface's state and error counters before @@ -1043,6 +1063,14 @@ static void kvaser_usb_leaf_rx_error(const struct kvaser_usb *dev, kvaser_usb_leaf_rx_error_update_can_state(priv, es, &tmp_cf); new_state = priv->can.state;

+ /* If there are errors, request status updates periodically as we do + * not get automatic notifications of improved state. + */ + if (new_state < CAN_STATE_BUS_OFF && + (es->rxerr || es->txerr || new_state == CAN_STATE_ERROR_PASSIVE)) + schedule_delayed_work(&leaf->chip_state_req_work, + msecs_to_jiffies(500)); + skb = alloc_can_err_skb(priv->netdev, &cf); if (!skb) { stats->rx_dropped++; @@ -1577,10 +1605,13 @@ static int kvaser_usb_leaf_start_chip(struct kvaser_usb_net_priv *priv)

static int kvaser_usb_leaf_stop_chip(struct kvaser_usb_net_priv *priv) { + struct kvaser_usb_net_leaf_priv *leaf = priv->sub_priv; int err;

reinit_completion(&priv->stop_comp);

+ cancel_delayed_work(&leaf->chip_state_req_work); + err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_STOP_CHIP, priv->channel); if (err) @@ -1627,6 +1658,31 @@ static int kvaser_usb_leaf_init_card(struct kvaser_usb *dev) return 0; }

+static int kvaser_usb_leaf_init_channel(struct kvaser_usb_net_priv *priv) +{ + struct kvaser_usb_net_leaf_priv *leaf; + + leaf = devm_kzalloc(&priv->dev->intf->dev, sizeof(*leaf), GFP_KERNEL); + if (!leaf) + return -ENOMEM; + + leaf->net = priv; + INIT_DELAYED_WORK(&leaf->chip_state_req_work, + kvaser_usb_leaf_chip_state_req_work); + + priv->sub_priv = leaf; + + return 0; +} + +static void kvaser_usb_leaf_remove_channel(struct kvaser_usb_net_priv *priv) +{ + struct kvaser_usb_net_leaf_priv *leaf = priv->sub_priv; + + if (leaf) + cancel_delayed_work_sync(&leaf->chip_state_req_work); +} + static int kvaser_usb_leaf_set_bittiming(struct net_device *netdev) { struct kvaser_usb_net_priv *priv = netdev_priv(netdev); @@ -1724,6 +1780,8 @@ const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops = { .dev_get_berr_counter = kvaser_usb_leaf_get_berr_counter, .dev_setup_endpoints = kvaser_usb_leaf_setup_endpoints, .dev_init_card = kvaser_usb_leaf_init_card, + .dev_init_channel = kvaser_usb_leaf_init_channel, + .dev_remove_channel = kvaser_usb_leaf_remove_channel, .dev_get_software_info = kvaser_usb_leaf_get_software_info, .dev_get_software_details = NULL, .dev_get_card_info = kvaser_usb_leaf_get_card_info,

From: Anssi Hannula anssi.hannula@bitwise.fi

[ Upstream commit 90904d326269a38fe5dd895fb2db7c03199654c4 ]

When auto-restart is enabled, the kvaser_usb_leaf driver considers transition from any state >= CAN_STATE_BUS_OFF as a bus-off recovery event (restart).

However, these events may occur at interface startup time before kvaser_usb_open() has set the state to CAN_STATE_ERROR_ACTIVE, causing restarts counter to increase and CAN_ERR_RESTARTED to be sent despite no actual restart having occurred.

Fix that by making the auto-restart condition checks more strict so that they only trigger when the interface was actually in the BUS_OFF state.

Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson extja@kvaser.com Signed-off-by: Anssi Hannula anssi.hannula@bitwise.fi Signed-off-by: Jimmy Assarsson extja@kvaser.com Link: https://lore.kernel.org/all/20221010185237.319219-10-extja@kvaser.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c index 52ac6446634d..d1877ff2ff71 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c @@ -899,7 +899,7 @@ static void kvaser_usb_leaf_tx_acknowledge(const struct kvaser_usb *dev, context = &priv->tx_contexts[tid % dev->max_tx_urbs];

/* Sometimes the state change doesn't come after a bus-off event */ - if (priv->can.restart_ms && priv->can.state >= CAN_STATE_BUS_OFF) { + if (priv->can.restart_ms && priv->can.state == CAN_STATE_BUS_OFF) { struct sk_buff *skb; struct can_frame *cf;

@@ -1002,7 +1002,7 @@ kvaser_usb_leaf_rx_error_update_can_state(struct kvaser_usb_net_priv *priv, }

if (priv->can.restart_ms && - cur_state >= CAN_STATE_BUS_OFF && + cur_state == CAN_STATE_BUS_OFF && new_state < CAN_STATE_BUS_OFF) priv->can.can_stats.restarts++;

@@ -1092,7 +1092,7 @@ static void kvaser_usb_leaf_rx_error(const struct kvaser_usb *dev, }

if (priv->can.restart_ms && - old_state >= CAN_STATE_BUS_OFF && + old_state == CAN_STATE_BUS_OFF && new_state < CAN_STATE_BUS_OFF) { cf->can_id |= CAN_ERR_RESTARTED; netif_carrier_on(priv->netdev);

From: Jimmy Assarsson extja@kvaser.com

[ Upstream commit 39d3df6b0ea80f9b515c632ca07b39b1c156edee ]

The device will respond with a CMD_ERROR_EVENT command, with error_code KVASER_USB_{LEAF,HYDRA}_ERROR_EVENT_PARAM, if the CMD_SET_BUSPARAMS_REQ contains invalid bittiming parameters. However, this command does not contain any channel reference.

To check if the CMD_SET_BUSPARAMS_REQ was successful, redback and compare the requested bittiming parameters with the device reported parameters.

Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Tested-by: Anssi Hannula anssi.hannula@bitwise.fi Co-developed-by: Anssi Hannula anssi.hannula@bitwise.fi Signed-off-by: Anssi Hannula anssi.hannula@bitwise.fi Signed-off-by: Jimmy Assarsson extja@kvaser.com Link: https://lore.kernel.org/all/20221010185237.319219-12-extja@kvaser.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 15 +- .../net/can/usb/kvaser_usb/kvaser_usb_core.c | 96 ++++++++++- .../net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 150 +++++++++++++++--- .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 64 ++++++-- 4 files changed, 284 insertions(+), 41 deletions(-)

diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h index cb8018723748..5699531f8787 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h @@ -119,9 +119,12 @@ struct kvaser_usb_net_priv { struct net_device *netdev; int channel;

- struct completion start_comp, stop_comp, flush_comp; + struct completion start_comp, stop_comp, flush_comp, + get_busparams_comp; struct usb_anchor tx_submitted;

+ struct kvaser_usb_busparams busparams_nominal, busparams_data; + spinlock_t tx_contexts_lock; /* lock for active_tx_contexts */ int active_tx_contexts; struct kvaser_usb_tx_urb_context tx_contexts[]; @@ -131,7 +134,9 @@ struct kvaser_usb_net_priv { * struct kvaser_usb_dev_ops - Device specific functions * @dev_set_mode: used for can.do_set_mode * @dev_set_bittiming: used for can.do_set_bittiming + * @dev_get_busparams: readback arbitration busparams * @dev_set_data_bittiming: used for can.do_set_data_bittiming + * @dev_get_data_busparams: readback data busparams * @dev_get_berr_counter: used for can.do_get_berr_counter * * @dev_setup_endpoints: setup USB in and out endpoints @@ -153,8 +158,12 @@ struct kvaser_usb_net_priv { */ struct kvaser_usb_dev_ops { int (*dev_set_mode)(struct net_device *netdev, enum can_mode mode); - int (*dev_set_bittiming)(struct net_device *netdev); - int (*dev_set_data_bittiming)(struct net_device *netdev); + int (*dev_set_bittiming)(const struct net_device *netdev, + const struct kvaser_usb_busparams *busparams); + int (*dev_get_busparams)(struct kvaser_usb_net_priv *priv); + int (*dev_set_data_bittiming)(const struct net_device *netdev, + const struct kvaser_usb_busparams *busparams); + int (*dev_get_data_busparams)(struct kvaser_usb_net_priv *priv); int (*dev_get_berr_counter)(const struct net_device *netdev, struct can_berr_counter *bec); int (*dev_setup_endpoints)(struct kvaser_usb *dev); diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c index e00afb94ec6c..da449d046905 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c @@ -416,10 +416,6 @@ static int kvaser_usb_open(struct net_device *netdev) if (err) return err;

- err = kvaser_usb_setup_rx_urbs(dev); - if (err) - goto error; - err = ops->dev_set_opt_mode(priv); if (err) goto error; @@ -510,6 +506,93 @@ static int kvaser_usb_close(struct net_device *netdev) return 0; }

+static int kvaser_usb_set_bittiming(struct net_device *netdev) +{ + struct kvaser_usb_net_priv *priv = netdev_priv(netdev); + struct kvaser_usb *dev = priv->dev; + const struct kvaser_usb_dev_ops *ops = dev->driver_info->ops; + struct can_bittiming *bt = &priv->can.bittiming; + + struct kvaser_usb_busparams busparams; + int tseg1 = bt->prop_seg + bt->phase_seg1; + int tseg2 = bt->phase_seg2; + int sjw = bt->sjw; + int err = -EOPNOTSUPP; + + busparams.bitrate = cpu_to_le32(bt->bitrate); + busparams.sjw = (u8)sjw; + busparams.tseg1 = (u8)tseg1; + busparams.tseg2 = (u8)tseg2; + if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) + busparams.nsamples = 3; + else + busparams.nsamples = 1; + + err = ops->dev_set_bittiming(netdev, &busparams); + if (err) + return err; + + err = kvaser_usb_setup_rx_urbs(priv->dev); + if (err) + return err; + + err = ops->dev_get_busparams(priv); + if (err) { + /* Treat EOPNOTSUPP as success */ + if (err == -EOPNOTSUPP) + err = 0; + return err; + } + + if (memcmp(&busparams, &priv->busparams_nominal, + sizeof(priv->busparams_nominal)) != 0) + err = -EINVAL; + + return err; +} + +static int kvaser_usb_set_data_bittiming(struct net_device *netdev) +{ + struct kvaser_usb_net_priv *priv = netdev_priv(netdev); + struct kvaser_usb *dev = priv->dev; + const struct kvaser_usb_dev_ops *ops = dev->driver_info->ops; + struct can_bittiming *dbt = &priv->can.data_bittiming; + + struct kvaser_usb_busparams busparams; + int tseg1 = dbt->prop_seg + dbt->phase_seg1; + int tseg2 = dbt->phase_seg2; + int sjw = dbt->sjw; + int err; + + if (!ops->dev_set_data_bittiming || + !ops->dev_get_data_busparams) + return -EOPNOTSUPP; + + busparams.bitrate = cpu_to_le32(dbt->bitrate); + busparams.sjw = (u8)sjw; + busparams.tseg1 = (u8)tseg1; + busparams.tseg2 = (u8)tseg2; + busparams.nsamples = 1; + + err = ops->dev_set_data_bittiming(netdev, &busparams); + if (err) + return err; + + err = kvaser_usb_setup_rx_urbs(priv->dev); + if (err) + return err; + + err = ops->dev_get_data_busparams(priv); + if (err) + return err; + + if (memcmp(&busparams, &priv->busparams_data, + sizeof(priv->busparams_data)) != 0) + err = -EINVAL; + + return err; +} + static void kvaser_usb_write_bulk_callback(struct urb *urb) { struct kvaser_usb_tx_urb_context *context = urb->context; @@ -696,6 +779,7 @@ static int kvaser_usb_init_one(struct kvaser_usb *dev, int channel) init_completion(&priv->start_comp); init_completion(&priv->stop_comp); init_completion(&priv->flush_comp); + init_completion(&priv->get_busparams_comp); priv->can.ctrlmode_supported = 0;

priv->dev = dev; @@ -708,7 +792,7 @@ static int kvaser_usb_init_one(struct kvaser_usb *dev, int channel) priv->can.state = CAN_STATE_STOPPED; priv->can.clock.freq = dev->cfg->clock.freq; priv->can.bittiming_const = dev->cfg->bittiming_const; - priv->can.do_set_bittiming = ops->dev_set_bittiming; + priv->can.do_set_bittiming = kvaser_usb_set_bittiming; priv->can.do_set_mode = ops->dev_set_mode; if ((driver_info->quirks & KVASER_USB_QUIRK_HAS_TXRX_ERRORS) || (priv->dev->card_data.capabilities & KVASER_USB_CAP_BERR_CAP)) @@ -720,7 +804,7 @@ static int kvaser_usb_init_one(struct kvaser_usb *dev, int channel)

if (priv->can.ctrlmode_supported & CAN_CTRLMODE_FD) { priv->can.data_bittiming_const = dev->cfg->data_bittiming_const; - priv->can.do_set_data_bittiming = ops->dev_set_data_bittiming; + priv->can.do_set_data_bittiming = kvaser_usb_set_data_bittiming; }

netdev->flags |= IFF_ECHO; diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c index 72c37dc50b6b..2764fdd7e84b 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c @@ -43,6 +43,8 @@ static const struct kvaser_usb_dev_cfg kvaser_usb_hydra_dev_cfg_flexc;

/* Minihydra command IDs */ #define CMD_SET_BUSPARAMS_REQ 16 +#define CMD_GET_BUSPARAMS_REQ 17 +#define CMD_GET_BUSPARAMS_RESP 18 #define CMD_GET_CHIP_STATE_REQ 19 #define CMD_CHIP_STATE_EVENT 20 #define CMD_SET_DRIVERMODE_REQ 21 @@ -193,13 +195,26 @@ struct kvaser_cmd_chip_state_event { #define KVASER_USB_HYDRA_BUS_MODE_CANFD_ISO 0x01 #define KVASER_USB_HYDRA_BUS_MODE_NONISO 0x02 struct kvaser_cmd_set_busparams { - struct kvaser_usb_busparams busparams_arb; + struct kvaser_usb_busparams busparams_nominal; u8 reserved0[4]; struct kvaser_usb_busparams busparams_data; u8 canfd_mode; u8 reserved1[7]; } __packed;

+/* Busparam type */ +#define KVASER_USB_HYDRA_BUSPARAM_TYPE_CAN 0x00 +#define KVASER_USB_HYDRA_BUSPARAM_TYPE_CANFD 0x01 +struct kvaser_cmd_get_busparams_req { + u8 type; + u8 reserved[27]; +} __packed; + +struct kvaser_cmd_get_busparams_res { + struct kvaser_usb_busparams busparams; + u8 reserved[20]; +} __packed; + /* Ctrl modes */ #define KVASER_USB_HYDRA_CTRLMODE_NORMAL 0x01 #define KVASER_USB_HYDRA_CTRLMODE_LISTEN 0x02 @@ -270,6 +285,8 @@ struct kvaser_cmd { struct kvaser_cmd_error_event error_event;

struct kvaser_cmd_set_busparams set_busparams_req; + struct kvaser_cmd_get_busparams_req get_busparams_req; + struct kvaser_cmd_get_busparams_res get_busparams_res;

struct kvaser_cmd_chip_state_event chip_state_event;

@@ -352,6 +369,10 @@ struct kvaser_cmd_ext { } __packed; } __packed;

+struct kvaser_usb_net_hydra_priv { + int pending_get_busparams_type; +}; + static const struct can_bittiming_const kvaser_usb_hydra_kcan_bittiming_c = { .name = "kvaser_usb_kcan", .tseg1_min = 1, @@ -805,6 +826,39 @@ static void kvaser_usb_hydra_flush_queue_reply(const struct kvaser_usb *dev, complete(&priv->flush_comp); }

+static void kvaser_usb_hydra_get_busparams_reply(const struct kvaser_usb *dev, + const struct kvaser_cmd *cmd) +{ + struct kvaser_usb_net_priv *priv; + struct kvaser_usb_net_hydra_priv *hydra; + + priv = kvaser_usb_hydra_net_priv_from_cmd(dev, cmd); + if (!priv) + return; + + hydra = priv->sub_priv; + if (!hydra) + return; + + switch (hydra->pending_get_busparams_type) { + case KVASER_USB_HYDRA_BUSPARAM_TYPE_CAN: + memcpy(&priv->busparams_nominal, &cmd->get_busparams_res.busparams, + sizeof(priv->busparams_nominal)); + break; + case KVASER_USB_HYDRA_BUSPARAM_TYPE_CANFD: + memcpy(&priv->busparams_data, &cmd->get_busparams_res.busparams, + sizeof(priv->busparams_nominal)); + break; + default: + dev_warn(&dev->intf->dev, "Unknown get_busparams_type %d\n", + hydra->pending_get_busparams_type); + break; + } + hydra->pending_get_busparams_type = -1; + + complete(&priv->get_busparams_comp); +} + static void kvaser_usb_hydra_bus_status_to_can_state(const struct kvaser_usb_net_priv *priv, u8 bus_status, @@ -1291,6 +1345,10 @@ static void kvaser_usb_hydra_handle_cmd_std(const struct kvaser_usb *dev, kvaser_usb_hydra_state_event(dev, cmd); break;

+ case CMD_GET_BUSPARAMS_RESP: + kvaser_usb_hydra_get_busparams_reply(dev, cmd); + break; + case CMD_ERROR_EVENT: kvaser_usb_hydra_error_event(dev, cmd); break; @@ -1491,15 +1549,58 @@ static int kvaser_usb_hydra_set_mode(struct net_device *netdev, return err; }

-static int kvaser_usb_hydra_set_bittiming(struct net_device *netdev) +static int kvaser_usb_hydra_get_busparams(struct kvaser_usb_net_priv *priv, + int busparams_type) +{ + struct kvaser_usb *dev = priv->dev; + struct kvaser_usb_net_hydra_priv *hydra = priv->sub_priv; + struct kvaser_cmd *cmd; + int err; + + if (!hydra) + return -EINVAL; + + cmd = kcalloc(1, sizeof(struct kvaser_cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->header.cmd_no = CMD_GET_BUSPARAMS_REQ; + kvaser_usb_hydra_set_cmd_dest_he + (cmd, dev->card_data.hydra.channel_to_he[priv->channel]); + kvaser_usb_hydra_set_cmd_transid + (cmd, kvaser_usb_hydra_get_next_transid(dev)); + cmd->get_busparams_req.type = busparams_type; + hydra->pending_get_busparams_type = busparams_type; + + reinit_completion(&priv->get_busparams_comp); + + err = kvaser_usb_send_cmd(dev, cmd, kvaser_usb_hydra_cmd_size(cmd)); + if (err) + return err; + + if (!wait_for_completion_timeout(&priv->get_busparams_comp, + msecs_to_jiffies(KVASER_USB_TIMEOUT))) + return -ETIMEDOUT; + + return err; +} + +static int kvaser_usb_hydra_get_nominal_busparams(struct kvaser_usb_net_priv *priv) +{ + return kvaser_usb_hydra_get_busparams(priv, KVASER_USB_HYDRA_BUSPARAM_TYPE_CAN); +} + +static int kvaser_usb_hydra_get_data_busparams(struct kvaser_usb_net_priv *priv) +{ + return kvaser_usb_hydra_get_busparams(priv, KVASER_USB_HYDRA_BUSPARAM_TYPE_CANFD); +} + +static int kvaser_usb_hydra_set_bittiming(const struct net_device *netdev, + const struct kvaser_usb_busparams *busparams) { struct kvaser_cmd *cmd; struct kvaser_usb_net_priv *priv = netdev_priv(netdev); - struct can_bittiming *bt = &priv->can.bittiming; struct kvaser_usb *dev = priv->dev; - int tseg1 = bt->prop_seg + bt->phase_seg1; - int tseg2 = bt->phase_seg2; - int sjw = bt->sjw; int err;

cmd = kcalloc(1, sizeof(struct kvaser_cmd), GFP_KERNEL); @@ -1507,11 +1608,8 @@ static int kvaser_usb_hydra_set_bittiming(struct net_device *netdev) return -ENOMEM;

cmd->header.cmd_no = CMD_SET_BUSPARAMS_REQ; - cmd->set_busparams_req.busparams_arb.bitrate = cpu_to_le32(bt->bitrate); - cmd->set_busparams_req.busparams_arb.sjw = (u8)sjw; - cmd->set_busparams_req.busparams_arb.tseg1 = (u8)tseg1; - cmd->set_busparams_req.busparams_arb.tseg2 = (u8)tseg2; - cmd->set_busparams_req.busparams_arb.nsamples = 1; + memcpy(&cmd->set_busparams_req.busparams_nominal, busparams, + sizeof(cmd->set_busparams_req.busparams_nominal));

kvaser_usb_hydra_set_cmd_dest_he (cmd, dev->card_data.hydra.channel_to_he[priv->channel]); @@ -1525,15 +1623,12 @@ static int kvaser_usb_hydra_set_bittiming(struct net_device *netdev) return err; }

-static int kvaser_usb_hydra_set_data_bittiming(struct net_device *netdev) +static int kvaser_usb_hydra_set_data_bittiming(const struct net_device *netdev, + const struct kvaser_usb_busparams *busparams) { struct kvaser_cmd *cmd; struct kvaser_usb_net_priv *priv = netdev_priv(netdev); - struct can_bittiming *dbt = &priv->can.data_bittiming; struct kvaser_usb *dev = priv->dev; - int tseg1 = dbt->prop_seg + dbt->phase_seg1; - int tseg2 = dbt->phase_seg2; - int sjw = dbt->sjw; int err;

cmd = kcalloc(1, sizeof(struct kvaser_cmd), GFP_KERNEL); @@ -1541,11 +1636,8 @@ static int kvaser_usb_hydra_set_data_bittiming(struct net_device *netdev) return -ENOMEM;

cmd->header.cmd_no = CMD_SET_BUSPARAMS_FD_REQ; - cmd->set_busparams_req.busparams_data.bitrate = cpu_to_le32(dbt->bitrate); - cmd->set_busparams_req.busparams_data.sjw = (u8)sjw; - cmd->set_busparams_req.busparams_data.tseg1 = (u8)tseg1; - cmd->set_busparams_req.busparams_data.tseg2 = (u8)tseg2; - cmd->set_busparams_req.busparams_data.nsamples = 1; + memcpy(&cmd->set_busparams_req.busparams_data, busparams, + sizeof(cmd->set_busparams_req.busparams_data));

if (priv->can.ctrlmode & CAN_CTRLMODE_FD) { if (priv->can.ctrlmode & CAN_CTRLMODE_FD_NON_ISO) @@ -1652,6 +1744,19 @@ static int kvaser_usb_hydra_init_card(struct kvaser_usb *dev) return 0; }

+static int kvaser_usb_hydra_init_channel(struct kvaser_usb_net_priv *priv) +{ + struct kvaser_usb_net_hydra_priv *hydra; + + hydra = devm_kzalloc(&priv->dev->intf->dev, sizeof(*hydra), GFP_KERNEL); + if (!hydra) + return -ENOMEM; + + priv->sub_priv = hydra; + + return 0; +} + static int kvaser_usb_hydra_get_software_info(struct kvaser_usb *dev) { struct kvaser_cmd cmd; @@ -1994,10 +2099,13 @@ kvaser_usb_hydra_frame_to_cmd(const struct kvaser_usb_net_priv *priv, const struct kvaser_usb_dev_ops kvaser_usb_hydra_dev_ops = { .dev_set_mode = kvaser_usb_hydra_set_mode, .dev_set_bittiming = kvaser_usb_hydra_set_bittiming, + .dev_get_busparams = kvaser_usb_hydra_get_nominal_busparams, .dev_set_data_bittiming = kvaser_usb_hydra_set_data_bittiming, + .dev_get_data_busparams = kvaser_usb_hydra_get_data_busparams, .dev_get_berr_counter = kvaser_usb_hydra_get_berr_counter, .dev_setup_endpoints = kvaser_usb_hydra_setup_endpoints, .dev_init_card = kvaser_usb_hydra_init_card, + .dev_init_channel = kvaser_usb_hydra_init_channel, .dev_get_software_info = kvaser_usb_hydra_get_software_info, .dev_get_software_details = kvaser_usb_hydra_get_software_details, .dev_get_card_info = kvaser_usb_hydra_get_card_info, diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c index 1e2f727a1efb..f06d63db9077 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c @@ -56,6 +56,8 @@ #define CMD_RX_EXT_MESSAGE 14 #define CMD_TX_EXT_MESSAGE 15 #define CMD_SET_BUS_PARAMS 16 +#define CMD_GET_BUS_PARAMS 17 +#define CMD_GET_BUS_PARAMS_REPLY 18 #define CMD_GET_CHIP_STATE 19 #define CMD_CHIP_STATE_EVENT 20 #define CMD_SET_CTRL_MODE 21 @@ -375,6 +377,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_leaf[] = { [CMD_CHIP_STATE_EVENT] = kvaser_fsize(u.leaf.chip_state_event), [CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.leaf.can_error_event), [CMD_GET_CAPABILITIES_RESP] = kvaser_fsize(u.leaf.cap_res), + [CMD_GET_BUS_PARAMS_REPLY] = kvaser_fsize(u.busparams), [CMD_ERROR_EVENT] = kvaser_fsize(u.leaf.error_event), /* ignored events: */ [CMD_FLUSH_QUEUE_REPLY] = CMD_SIZE_ANY, @@ -1467,6 +1470,25 @@ static void kvaser_usb_leaf_stop_chip_reply(const struct kvaser_usb *dev, complete(&priv->stop_comp); }

+static void kvaser_usb_leaf_get_busparams_reply(const struct kvaser_usb *dev, + const struct kvaser_cmd *cmd) +{ + struct kvaser_usb_net_priv *priv; + u8 channel = cmd->u.busparams.channel; + + if (channel >= dev->nchannels) { + dev_err(&dev->intf->dev, + "Invalid channel number (%d)\n", channel); + return; + } + + priv = dev->nets[channel]; + memcpy(&priv->busparams_nominal, &cmd->u.busparams.busparams, + sizeof(priv->busparams_nominal)); + + complete(&priv->get_busparams_comp); +} + static void kvaser_usb_leaf_handle_command(const struct kvaser_usb *dev, const struct kvaser_cmd *cmd) { @@ -1509,6 +1531,10 @@ static void kvaser_usb_leaf_handle_command(const struct kvaser_usb *dev, kvaser_usb_leaf_error_event(dev, cmd); break;

+ case CMD_GET_BUS_PARAMS_REPLY: + kvaser_usb_leaf_get_busparams_reply(dev, cmd); + break; + /* Ignored commands */ case CMD_USBCAN_CLOCK_OVERFLOW_EVENT: if (dev->driver_info->family != KVASER_USBCAN) @@ -1683,10 +1709,10 @@ static void kvaser_usb_leaf_remove_channel(struct kvaser_usb_net_priv *priv) cancel_delayed_work_sync(&leaf->chip_state_req_work); }

-static int kvaser_usb_leaf_set_bittiming(struct net_device *netdev) +static int kvaser_usb_leaf_set_bittiming(const struct net_device *netdev, + const struct kvaser_usb_busparams *busparams) { struct kvaser_usb_net_priv *priv = netdev_priv(netdev); - struct can_bittiming *bt = &priv->can.bittiming; struct kvaser_usb *dev = priv->dev; struct kvaser_cmd *cmd; int rc; @@ -1699,15 +1725,8 @@ static int kvaser_usb_leaf_set_bittiming(struct net_device *netdev) cmd->len = CMD_HEADER_LEN + sizeof(struct kvaser_cmd_busparams); cmd->u.busparams.channel = priv->channel; cmd->u.busparams.tid = 0xff; - cmd->u.busparams.busparams.bitrate = cpu_to_le32(bt->bitrate); - cmd->u.busparams.busparams.sjw = bt->sjw; - cmd->u.busparams.busparams.tseg1 = bt->prop_seg + bt->phase_seg1; - cmd->u.busparams.busparams.tseg2 = bt->phase_seg2; - - if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) - cmd->u.busparams.busparams.nsamples = 3; - else - cmd->u.busparams.busparams.nsamples = 1; + memcpy(&cmd->u.busparams.busparams, busparams, + sizeof(cmd->u.busparams.busparams));

rc = kvaser_usb_send_cmd(dev, cmd, cmd->len);

@@ -1715,6 +1734,27 @@ static int kvaser_usb_leaf_set_bittiming(struct net_device *netdev) return rc; }

+static int kvaser_usb_leaf_get_busparams(struct kvaser_usb_net_priv *priv) +{ + int err; + + if (priv->dev->driver_info->family == KVASER_USBCAN) + return -EOPNOTSUPP; + + reinit_completion(&priv->get_busparams_comp); + + err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_GET_BUS_PARAMS, + priv->channel); + if (err) + return err; + + if (!wait_for_completion_timeout(&priv->get_busparams_comp, + msecs_to_jiffies(KVASER_USB_TIMEOUT))) + return -ETIMEDOUT; + + return 0; +} + static int kvaser_usb_leaf_set_mode(struct net_device *netdev, enum can_mode mode) { @@ -1776,7 +1816,9 @@ static int kvaser_usb_leaf_setup_endpoints(struct kvaser_usb *dev) const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops = { .dev_set_mode = kvaser_usb_leaf_set_mode, .dev_set_bittiming = kvaser_usb_leaf_set_bittiming, + .dev_get_busparams = kvaser_usb_leaf_get_busparams, .dev_set_data_bittiming = NULL, + .dev_get_data_busparams = NULL, .dev_get_berr_counter = kvaser_usb_leaf_get_berr_counter, .dev_setup_endpoints = kvaser_usb_leaf_setup_endpoints, .dev_init_card = kvaser_usb_leaf_init_card,

From: Liu Shixin liushixin2@huawei.com

[ Upstream commit 94a7ad9283464b75b12516c5512541d467cefcf8 ]

syzkaller found a bug:

BUG: unable to handle page fault for address: ffffc9000a3b1000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 100000067 P4D 100000067 PUD 10015f067 PMD 1121ca067 PTE 0 Oops: 0002 [#1] PREEMPT SMP CPU: 0 PID: 23489 Comm: vivid-000-vid-c Not tainted 6.1.0-rc1+ #512 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:memcpy_erms+0x6/0x10 [...] Call Trace: <TASK> ? tpg_fill_plane_buffer+0x856/0x15b0 vivid_fillbuff+0x8ac/0x1110 vivid_thread_vid_cap_tick+0x361/0xc90 vivid_thread_vid_cap+0x21a/0x3a0 kthread+0x143/0x180 ret_from_fork+0x1f/0x30 </TASK>

This is because we forget to check boundary after adjust compose->height int V4L2_SEL_TGT_CROP case. Add v4l2_rect_map_inside() to fix this problem for this case.

Fixes: ef834f7836ec ("[media] vivid: add the video capture and output parts") Signed-off-by: Liu Shixin liushixin2@huawei.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/vivid/vivid-vid-cap.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/vivid/vivid-vid-cap.c b/drivers/media/platform/vivid/vivid-vid-cap.c index 48f2c9c96fc9..ded48b7ad774 100644 --- a/drivers/media/platform/vivid/vivid-vid-cap.c +++ b/drivers/media/platform/vivid/vivid-vid-cap.c @@ -923,6 +923,7 @@ int vivid_vid_cap_s_selection(struct file *file, void *fh, struct v4l2_selection if (dev->has_compose_cap) { v4l2_rect_set_min_size(compose, &min_rect); v4l2_rect_set_max_size(compose, &max_rect); + v4l2_rect_map_inside(compose, &fmt); } dev->fmt_cap_rect = fmt; tpg_s_buf_height(&dev->tpg, fmt.height);

From: Marek Vasut marex@denx.de

[ Upstream commit b8f6efccbb9dc0ff5dee7e20d69a4747298ee603 ]

When using wpa_supplicant v2.10, this driver is no longer able to associate with any AP and fails in the EAPOL 4-way handshake while sending the 2/4 message to the AP. The problem is not present in wpa_supplicant v2.9 or older. The problem stems from HostAP commit 144314eaa ("wpa_supplicant: Send EAPOL frames over nl80211 where available") which changes the way EAPOL frames are sent, from them being send at L2 frames to them being sent via nl80211 control port.

An EAPOL frame sent as L2 frame is passed to the WiFi driver with skb->protocol ETH_P_PAE, while EAPOL frame sent via nl80211 control port has skb->protocol set to ETH_P_802_3 . The later happens in ieee80211_tx_control_port(), where the EAPOL frame is encapsulated into 802.3 frame.

The rsi_91x driver handles ETH_P_PAE EAPOL frames as high-priority frames and sends them via highest-priority transmit queue, while the ETH_P_802_3 frames are sent as regular frames. The EAPOL 4-way handshake frames must be sent as highest-priority, otherwise the 4-way handshake times out.

Therefore, to fix this problem, inspect the skb control flags and if flag IEEE80211_TX_CTRL_PORT_CTRL_PROTO is set, assume this is an EAPOL frame and transmit the frame via high-priority queue just like other ETH_P_PAE frames.

Fixes: 0eb42586cf87 ("rsi: data packet descriptor enhancements") Signed-off-by: Marek Vasut marex@denx.de Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/20221104163339.227432-1-marex@denx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/rsi/rsi_91x_core.c | 4 +++- drivers/net/wireless/rsi/rsi_91x_hal.c | 6 +++++- 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_core.c b/drivers/net/wireless/rsi/rsi_91x_core.c index c6c29034b2ea..a939b552a8e4 100644 --- a/drivers/net/wireless/rsi/rsi_91x_core.c +++ b/drivers/net/wireless/rsi/rsi_91x_core.c @@ -466,7 +466,9 @@ void rsi_core_xmit(struct rsi_common *common, struct sk_buff *skb) tid, 0); } } - if (skb->protocol == cpu_to_be16(ETH_P_PAE)) { + + if (IEEE80211_SKB_CB(skb)->control.flags & + IEEE80211_TX_CTRL_PORT_CTRL_PROTO) { q_num = MGMT_SOFT_Q; skb->priority = q_num; } diff --git a/drivers/net/wireless/rsi/rsi_91x_hal.c b/drivers/net/wireless/rsi/rsi_91x_hal.c index 2cb7cca4ec2d..b445a52fbfbd 100644 --- a/drivers/net/wireless/rsi/rsi_91x_hal.c +++ b/drivers/net/wireless/rsi/rsi_91x_hal.c @@ -152,12 +152,16 @@ int rsi_prepare_data_desc(struct rsi_common *common, struct sk_buff *skb) u8 header_size; u8 vap_id = 0; u8 dword_align_bytes; + bool tx_eapol; u16 seq_num;

info = IEEE80211_SKB_CB(skb); vif = info->control.vif; tx_params = (struct skb_info *)info->driver_data;

+ tx_eapol = IEEE80211_SKB_CB(skb)->control.flags & + IEEE80211_TX_CTRL_PORT_CTRL_PROTO; + header_size = FRAME_DESC_SZ + sizeof(struct rsi_xtended_desc); if (header_size > skb_headroom(skb)) { rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__); @@ -221,7 +225,7 @@ int rsi_prepare_data_desc(struct rsi_common *common, struct sk_buff *skb) } }

- if (skb->protocol == cpu_to_be16(ETH_P_PAE)) { + if (tx_eapol) { rsi_dbg(INFO_ZONE, "*** Tx EAPOL ***\n");

data_desc->frame_info = cpu_to_le16(RATE_INFO_ENABLE);

From: David Howells dhowells@redhat.com

[ Upstream commit c3d96f690a790074b508fe183a41e36a00cd7ddd ]

Provide a CONFIG_PROC_FS=n fallback for proc_create_net_single_write().

Also provide a fallback for proc_create_net_data_write().

Fixes: 564def71765c ("proc: Add a way to make network proc files writable") Reported-by: kernel test robot lkp@intel.com Signed-off-by: David Howells dhowells@redhat.com cc: Marc Dionne marc.dionne@auristor.com cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/proc_fs.h | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index 5141657a0f7f..c16352fbbe1f 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -117,8 +117,10 @@ static inline void proc_remove(struct proc_dir_entry *de) {} static inline int remove_proc_subtree(const char *name, struct proc_dir_entry *parent) { return 0; }

#define proc_create_net_data(name, mode, parent, ops, state_size, data) ({NULL;}) +#define proc_create_net_data_write(name, mode, parent, ops, write, state_size, data) ({NULL;}) #define proc_create_net(name, mode, parent, state_size, ops) ({NULL;}) #define proc_create_net_single(name, mode, parent, show, data) ({NULL;}) +#define proc_create_net_single_write(name, mode, parent, show, write, data) ({NULL;})

#endif /* CONFIG_PROC_FS */

From: Zeng Heng zengheng4@huawei.com

[ Upstream commit ec7bf231aaa1bdbcb69d23bc50c753c80fb22429 ]

kasprintf() would return NULL pointer when kmalloc() fail to allocate. Need to check the return pointer before calling strcmp().

Fixes: 7a824e214e25 ("ASoC: mmp: add audio dma support") Signed-off-by: Zeng Heng zengheng4@huawei.com Link: https://lore.kernel.org/r/20221114085629.1910435-1-zengheng4@huawei.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/pxa/mmp-pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/pxa/mmp-pcm.c b/sound/soc/pxa/mmp-pcm.c index d2d4652de32c..5969aa66410d 100644 --- a/sound/soc/pxa/mmp-pcm.c +++ b/sound/soc/pxa/mmp-pcm.c @@ -90,7 +90,7 @@ static bool filter(struct dma_chan *chan, void *param)

devname = kasprintf(GFP_KERNEL, "%s.%d", dma_data->dma_res->name, dma_data->ssp_id); - if ((strcmp(dev_name(chan->device->dev), devname) == 0) && + if (devname && (strcmp(dev_name(chan->device->dev), devname) == 0) && (chan->chan_id == dma_data->dma_res->start)) { found = true; }

From: Xiu Jianfeng xiujianfeng@huawei.com

[ Upstream commit 25369175ce84813dd99d6604e710dc2491f68523 ]

The input parameter @fields is type of struct ima_template_field ***, so when allocates array memory for @fields, the size of element should be sizeof(**field) instead of sizeof(*field).

Actually the original code would not cause any runtime error, but it's better to make it logically right.

Fixes: adf53a778a0a ("ima: new templates management mechanism") Signed-off-by: Xiu Jianfeng xiujianfeng@huawei.com Reviewed-by: Roberto Sassu roberto.sassu@huawei.com Signed-off-by: Mimi Zohar zohar@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- security/integrity/ima/ima_template.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/security/integrity/ima/ima_template.c b/security/integrity/ima/ima_template.c index 4dfdccce497b..13567e555130 100644 --- a/security/integrity/ima/ima_template.c +++ b/security/integrity/ima/ima_template.c @@ -196,11 +196,11 @@ static int template_desc_init_fields(const char *template_fmt, }

if (fields && num_fields) { - *fields = kmalloc_array(i, sizeof(*fields), GFP_KERNEL); + *fields = kmalloc_array(i, sizeof(**fields), GFP_KERNEL); if (*fields == NULL) return -ENOMEM;

- memcpy(*fields, found_fields, i * sizeof(*fields)); + memcpy(*fields, found_fields, i * sizeof(**fields)); *num_fields = i; }

From: Hui Tang tanghui20@huawei.com

[ Upstream commit 6bdd45d795adf9e73b38ced5e7f750cd199499ff ]

It will cause null-ptr-deref when resource_size(add_range) invoked, if platform_get_resource() returns NULL.

Fixes: 96ba9dd65788 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories") Signed-off-by: Hui Tang tanghui20@huawei.com Acked-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Link: https://lore.kernel.org/linux-mtd/20221114090240.244172-1-tanghui20@huawei.c... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mtd/lpddr/lpddr2_nvm.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/mtd/lpddr/lpddr2_nvm.c b/drivers/mtd/lpddr/lpddr2_nvm.c index 90e6cb64db69..b004d3213a66 100644 --- a/drivers/mtd/lpddr/lpddr2_nvm.c +++ b/drivers/mtd/lpddr/lpddr2_nvm.c @@ -442,6 +442,8 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)

/* lpddr2_nvm address range */ add_range = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!add_range) + return -ENODEV;

/* Populate map_info data structure */ *map = (struct map_info) {

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit 7f5866dd96d95b74e439f6ee17b8abd8195179fb ]

If device_register() returns error in solo_sysfs_init(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup().

Fixes: dcae5dacbce5 ("[media] solo6x10: sync to latest code from Bluecherry's git repo") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/pci/solo6x10/solo6x10-core.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/media/pci/solo6x10/solo6x10-core.c b/drivers/media/pci/solo6x10/solo6x10-core.c index 19ffd2ed3cc7..d3bca099b78b 100644 --- a/drivers/media/pci/solo6x10/solo6x10-core.c +++ b/drivers/media/pci/solo6x10/solo6x10-core.c @@ -429,6 +429,7 @@ static int solo_sysfs_init(struct solo_dev *solo_dev) solo_dev->nr_chans);

if (device_register(dev)) { + put_device(dev); dev->parent = NULL; return -ENOMEM; }

From: Marcus Folkesson marcus.folkesson@gmail.com

[ Upstream commit 9d013910df22de91333a0acc81d1dbb115bd76f6 ]

This is no bugfix (so no Fixes: tag is necessary) as it is taken care of in hid_sensor_custom_add_attributes().

The motivation for this patch is that: hid_sensor_custom_field.attr_name and hid_sensor_custom_field.attrs has the size of HID_CUSTOM_TOTAL_ATTRS and used in same context.

We compare against HID_CUSTOM_TOTAL_ATTRS when looping through hid_custom_attrs.

We will silent the smatch error: hid_sensor_custom_add_attributes() error: buffer overflow 'hid_custom_attrs' 8 <= 10

Signed-off-by: Marcus Folkesson marcus.folkesson@gmail.com Acked-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-sensor-custom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/hid-sensor-custom.c b/drivers/hid/hid-sensor-custom.c index bb012bc032e0..a0c30863e1e0 100644 --- a/drivers/hid/hid-sensor-custom.c +++ b/drivers/hid/hid-sensor-custom.c @@ -67,7 +67,7 @@ struct hid_sensor_sample { u32 raw_len; } __packed;

-static struct attribute hid_custom_attrs[] = { +static struct attribute hid_custom_attrs[HID_CUSTOM_TOTAL_ATTRS] = { {.name = "name", .mode = S_IRUGO}, {.name = "units", .mode = S_IRUGO}, {.name = "unit-expo", .mode = S_IRUGO},

From: Xiu Jianfeng xiujianfeng@huawei.com

[ Upstream commit 739a6a6bbdb793bd57938cb24aa5a6df89983546 ]

If clk_register() fails, @pll->rate_table may have allocated memory by kmemdup(), so it needs to be freed, otherwise will cause memory leak issue, this patch fixes it.

Fixes: 90c590254051 ("clk: rockchip: add clock type for pll clocks and pll used on rk3066") Signed-off-by: Xiu Jianfeng xiujianfeng@huawei.com Link: https://lore.kernel.org/r/20221123091201.199819-1-xiujianfeng@huawei.com Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/rockchip/clk-pll.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c index dd0433d4753e..77aff5defac6 100644 --- a/drivers/clk/rockchip/clk-pll.c +++ b/drivers/clk/rockchip/clk-pll.c @@ -972,6 +972,7 @@ struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx, return mux_clk;

err_pll: + kfree(pll->rate_table); clk_unregister(mux_clk); mux_clk = pll_clk; err_mux:

From: Zheng Yongjun zhengyongjun3@huawei.com

[ Upstream commit 2399401feee27c639addc5b7e6ba519d3ca341bf ]

Free 'info' upon remapping error to avoid a memory leak.

Fixes: e644f7d62894 ("[MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver") Signed-off-by: Zheng Yongjun zhengyongjun3@huawei.com [miquel.raynal@bootlin.com: Reword the commit log] Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Link: https://lore.kernel.org/linux-mtd/20221119073307.22929-1-zhengyongjun3@huawe... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mtd/maps/pxa2xx-flash.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index 2cde28ed95c9..59d2fe1f46e1 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -69,6 +69,7 @@ static int pxa2xx_flash_probe(struct platform_device *pdev) if (!info->map.virt) { printk(KERN_WARNING "Failed to ioremap %s\n", info->map.name); + kfree(info); return -ENOMEM; } info->map.cached = @@ -91,6 +92,7 @@ static int pxa2xx_flash_probe(struct platform_device *pdev) iounmap((void *)info->map.virt); if (info->map.cached) iounmap(info->map.cached); + kfree(info); return -EIO; } info->mtd->dev.parent = &pdev->dev;

From: Gautam Menghani gautammenghani201@gmail.com

[ Upstream commit 813ceef062b53d68f296aa3cb944b21a091fabdb ]

The function send_packet() has a race condition as follows:

func send_packet() { // do work call usb_submit_urb() mutex_unlock() wait_for_event_interruptible() <-- lock gone mutex_lock() }

func vfd_write() { mutex_lock() call send_packet() <- prev call is not completed mutex_unlock() }

When the mutex is unlocked and the function send_packet() waits for the call to complete, vfd_write() can start another call, which leads to the "URB submitted while active" warning in usb_submit_urb(). Fix this by removing the mutex_unlock() call in send_packet() and using mutex_lock_interruptible().

Link: https://syzkaller.appspot.com/bug?id=e378e6a51fbe6c5cc43e34f131cc9a315ef0337...

Fixes: 21677cfc562a ("V4L/DVB: ir-core: add imon driver") Reported-by: syzbot+0c3cb6dc05fbbdc3ad66@syzkaller.appspotmail.com Signed-off-by: Gautam Menghani gautammenghani201@gmail.com Signed-off-by: Sean Young sean@mess.org Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/rc/imon.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 6b10363fb6f0..99bb7380ee0e 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -613,15 +613,14 @@ static int send_packet(struct imon_context *ictx) pr_err_ratelimited("error submitting urb(%d)\n", retval); } else { /* Wait for transmission to complete (or abort) */ - mutex_unlock(&ictx->lock); retval = wait_for_completion_interruptible( &ictx->tx.finished); if (retval) { usb_kill_urb(ictx->tx_urb); pr_err_ratelimited("task interrupted\n"); } - mutex_lock(&ictx->lock);

+ ictx->tx.busy = false; retval = ictx->tx.status; if (retval) pr_err_ratelimited("packet tx failed (%d)\n", retval); @@ -928,7 +927,8 @@ static ssize_t vfd_write(struct file *file, const char __user *buf, return -ENODEV; }

- mutex_lock(&ictx->lock); + if (mutex_lock_interruptible(&ictx->lock)) + return -ERESTARTSYS;

if (!ictx->dev_present_intf0) { pr_err_ratelimited("no iMON device present\n");

From: Chen Zhongjin chenzhongjin@huawei.com

[ Upstream commit a574359e2e71ce16be212df3a082ed60a4bd2c5f ]

In dvb_register_frontend(), dvb_register_device() is possible to fail but its return value is ignored.

It will cause use-after-free when module is removed, because in dvb_unregister_frontend() it tries to unregister a not registered device.

BUG: KASAN: use-after-free in dvb_remove_device+0x18b/0x1f0 [dvb_core] Read of size 4 at addr ffff88800dff4824 by task rmmod/428 CPU: 3 PID: 428 Comm: rmmod Call Trace: <TASK> ... dvb_remove_device+0x18b/0x1f0 [dvb_core] dvb_unregister_frontend+0x7b/0x130 [dvb_core] vidtv_bridge_remove+0x6e/0x160 [dvb_vidtv_bridge] ...

Fix this by catching return value of dvb_register_device(). However the fe->refcount can't be put to zero immediately, because there are still modules calling dvb_frontend_detach() when dvb_register_frontend() fails.

Link: https://lore.kernel.org/linux-media/20221108033005.169095-1-chenzhongjin@hua... Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Chen Zhongjin chenzhongjin@huawei.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/dvb-core/dvb_frontend.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c index 8a61150ee249..1768c1b515b3 100644 --- a/drivers/media/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb-core/dvb_frontend.c @@ -2956,6 +2956,7 @@ int dvb_register_frontend(struct dvb_adapter *dvb, .name = fe->ops.info.name, #endif }; + int ret;

dev_dbg(dvb->device, "%s:\n", __func__);

@@ -2989,8 +2990,13 @@ int dvb_register_frontend(struct dvb_adapter *dvb, "DVB: registering adapter %i frontend %i (%s)...\n", fe->dvb->num, fe->id, fe->ops.info.name);

- dvb_register_device(fe->dvb, &fepriv->dvbdev, &dvbdev_template, + ret = dvb_register_device(fe->dvb, &fepriv->dvbdev, &dvbdev_template, fe, DVB_DEVICE_FRONTEND, 0); + if (ret) { + dvb_frontend_put(fe); + mutex_unlock(&frontend_mutex); + return ret; + }

/* * Initialize the cache to the proper values according with the

From: Aakarsh Jain aakarsh.jain@samsung.com

[ Upstream commit f50ebe10f5d8092c37e2bd430c78e03bf38b1e20 ]

Commit 5441e9dafdfc6dc40 ("[media] s5p-mfc: Core support for MFC v7") which adds mfc v7 support for Exynos3250 and use the same compatible string as used by Exynos5240 but both the IPs are a bit different in terms of IP clock. Add variant driver data based on the new compatible string "samsung,exynos3250-mfc" for Exynos3250 SoC.

Suggested-by: Alim Akhtar alim.akhtar@samsung.com Fixes: 5441e9dafdfc ("[media] s5p-mfc: Core support for MFC v7") Signed-off-by: Aakarsh Jain aakarsh.jain@samsung.com Reviewed-by: Alim Akhtar alim.akhtar@samsung.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/s5p-mfc/s5p_mfc.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index 0fc101bc58d6..684aa8491a38 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -1574,8 +1574,18 @@ static struct s5p_mfc_variant mfc_drvdata_v7 = { .port_num = MFC_NUM_PORTS_V7, .buf_size = &buf_size_v7, .fw_name[0] = "s5p-mfc-v7.fw", - .clk_names = {"mfc", "sclk_mfc"}, - .num_clocks = 2, + .clk_names = {"mfc"}, + .num_clocks = 1, +}; + +static struct s5p_mfc_variant mfc_drvdata_v7_3250 = { + .version = MFC_VERSION_V7, + .version_bit = MFC_V7_BIT, + .port_num = MFC_NUM_PORTS_V7, + .buf_size = &buf_size_v7, + .fw_name[0] = "s5p-mfc-v7.fw", + .clk_names = {"mfc", "sclk_mfc"}, + .num_clocks = 2, };

static struct s5p_mfc_buf_size_v6 mfc_buf_size_v8 = { @@ -1645,6 +1655,9 @@ static const struct of_device_id exynos_mfc_match[] = { }, { .compatible = "samsung,mfc-v7", .data = &mfc_drvdata_v7, + }, { + .compatible = "samsung,exynos3250-mfc", + .data = &mfc_drvdata_v7_3250, }, { .compatible = "samsung,mfc-v8", .data = &mfc_drvdata_v8,

From: Trond Myklebust trond.myklebust@hammerspace.com

[ Upstream commit 43c1031f7110967c240cb6e922adcfc4b8899183 ]

We must not change the value of label->len if it is zero, since that indicates we stored a label.

Fixes: b4487b935452 ("nfs: Fix getxattr kernel panic and memory overflow") Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/nfs4xdr.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 56e48642c43e..f0021e3b8efd 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -4277,12 +4277,10 @@ static int decode_attr_security_label(struct xdr_stream *xdr, uint32_t *bitmap, if (unlikely(!p)) goto out_overflow; if (len < NFS4_MAXLABELLEN) { - if (label) { - if (label->len) { - if (label->len < len) - return -ERANGE; - memcpy(label->label, p, len); - } + if (label && label->len) { + if (label->len < len) + return -ERANGE; + memcpy(label->label, p, len); label->len = len; label->pi = pi; label->lfs = lfs;

From: Liu Shixin liushixin2@huawei.com

[ Upstream commit 9d86515c3d4c0564a0c31a2df87d735353a1971e ]

pci_disable_device() need be called while module exiting, switch to use pcim_enable(), pci_disable_device() will be called in pcim_release().

Fixes: 3285ea10e9b0 ("ALSA: asihpi - Interrelated HPI tidy up.") Signed-off-by: Liu Shixin liushixin2@huawei.com Link: https://lore.kernel.org/r/20221126021429.3029562-1-liushixin2@huawei.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/asihpi/hpioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/asihpi/hpioctl.c b/sound/pci/asihpi/hpioctl.c index 3f06986fbecf..d8c244a5dce0 100644 --- a/sound/pci/asihpi/hpioctl.c +++ b/sound/pci/asihpi/hpioctl.c @@ -359,7 +359,7 @@ int asihpi_adapter_probe(struct pci_dev *pci_dev, pci_dev->device, pci_dev->subsystem_vendor, pci_dev->subsystem_device, pci_dev->devfn);

- if (pci_enable_device(pci_dev) < 0) { + if (pcim_enable_device(pci_dev) < 0) { dev_err(&pci_dev->dev, "pci_enable_device failed, disabling device\n"); return -EIO;

From: Xiongfeng Wang wangxiongfeng2@huawei.com

[ Upstream commit ca54639c7752edf1304d92ff4d0c049d4efc9ba0 ]

As comment of pci_get_class() says, it returns a pci_device with its refcount increased and decreased the refcount for the input parameter @from if it is not NULL.

If we break the loop in amdgpu_atrm_get_bios() with 'pdev' not NULL, we need to call pci_dev_put() to decrease the refcount. Add the missing pci_dev_put() to avoid refcount leak.

Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Signed-off-by: Xiongfeng Wang wangxiongfeng2@huawei.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c index 6cf3dd5edffd..c1e2e9912bf0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c @@ -312,6 +312,7 @@ static bool amdgpu_atrm_get_bios(struct amdgpu_device *adev)

if (!found) return false; + pci_dev_put(pdev);

adev->bios = kmalloc(size, GFP_KERNEL); if (!adev->bios) {

From: Dan Carpenter error27@gmail.com

[ Upstream commit e5214f363dabca240446272dac54d404501ad5e5 ]

The "ignore_updelay" variable needs to be initialized to false.

Fixes: f8a65ab2f3ff ("bonding: fix link recovery in mode 2 when updelay is nonzero") Signed-off-by: Dan Carpenter error27@gmail.com Reviewed-by: Pavan Chebbi pavan.chebbi@broadcom.com Acked-by: Jay Vosburgh jay.vosburgh@canonical.com Link: https://lore.kernel.org/r/Y4SWJlh3ohJ6EPTL@kili Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 85efa0e0ee2c..4e4adacb5c2c 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2096,10 +2096,10 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in /* called with rcu_read_lock() */ static int bond_miimon_inspect(struct bonding *bond) { + bool ignore_updelay = false; int link_state, commit = 0; struct list_head *iter; struct slave *slave; - bool ignore_updelay;

ignore_updelay = !rcu_dereference(bond->curr_active_slave);

From: Chen Zhongjin chenzhongjin@huawei.com

[ Upstream commit 833a9fd28c9b7ccb39a334721379e992dc1c0c89 ]

In regulatory_init_db(), when it's going to return a error, reg_pdev should be unregistered. When load_builtin_regdb_keys() fails it doesn't do it and makes cfg80211 can't be reload with report:

sysfs: cannot create duplicate filename '/devices/platform/regulatory.0' ... <TASK> dump_stack_lvl+0x79/0x9b sysfs_warn_dup.cold+0x1c/0x29 sysfs_create_dir_ns+0x22d/0x290 kobject_add_internal+0x247/0x800 kobject_add+0x135/0x1b0 device_add+0x389/0x1be0 platform_device_add+0x28f/0x790 platform_device_register_full+0x376/0x4b0 regulatory_init+0x9a/0x4b2 [cfg80211] cfg80211_init+0x84/0x113 [cfg80211] ...

Fixes: 90a53e4432b1 ("cfg80211: implement regdb signature checking") Signed-off-by: Chen Zhongjin chenzhongjin@huawei.com Link: https://lore.kernel.org/r/20221109090237.214127-1-chenzhongjin@huawei.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/wireless/reg.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 07d053603e3a..beba41f8a178 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -3918,8 +3918,10 @@ static int __init regulatory_init_db(void) return -EINVAL;

err = load_builtin_regdb_keys(); - if (err) + if (err) { + platform_device_unregister(reg_pdev); return err; + }

/* We always try to get an update for the static regdomain */ err = regulatory_hint_core(cfg80211_world_regdom->alpha2);

From: Liu Shixin liushixin2@huawei.com

[ Upstream commit 57fb35d7542384cac8f198cd1c927540ad38b61a ]

Add missing pci_disable_device() in the error path in saa7164_initdev().

Fixes: 443c1228d505 ("V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon") Signed-off-by: Liu Shixin liushixin2@huawei.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/pci/saa7164/saa7164-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c index 5102519df108..dba9071e8507 100644 --- a/drivers/media/pci/saa7164/saa7164-core.c +++ b/drivers/media/pci/saa7164/saa7164-core.c @@ -1237,7 +1237,7 @@ static int saa7164_initdev(struct pci_dev *pci_dev,

if (saa7164_dev_setup(dev) < 0) { err = -EINVAL; - goto fail_free; + goto fail_dev; }

/* print pci info */ @@ -1405,6 +1405,8 @@ static int saa7164_initdev(struct pci_dev *pci_dev,

fail_irq: saa7164_dev_unregister(dev); +fail_dev: + pci_disable_device(pci_dev); fail_free: v4l2_device_unregister(&dev->v4l2_dev); kfree(dev);

From: Wang ShaoBo bobo.shaobowang@huawei.com

[ Upstream commit 50fa355bc0d75911fe9d5072a5ba52cdb803aff7 ]

socket dynamically created is not released when getting an unintended address family type in rpc_sockname(), direct to out_release for calling sock_release().

Fixes: 2e738fdce22f ("SUNRPC: Add API to acquire source address") Signed-off-by: Wang ShaoBo bobo.shaobowang@huawei.com Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/clnt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 0d7d149b1b1b..1946bd13d5df 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -1267,7 +1267,7 @@ static int rpc_sockname(struct net *net, struct sockaddr *sap, size_t salen, break; default: err = -EAFNOSUPPORT; - goto out; + goto out_release; } if (err < 0) { dprintk("RPC: can't bind UDP socket (%d)\n", err);

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit 0ca18d09c744fb030ae9bc5836c3e357e0237dea ]

mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call mmc_free_host().

Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Link: https://lore.kernel.org/r/20221101063023.1664968-3-yangyingliang@huawei.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/moxart-mmc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c index 1552d1f09c5c..52307dce08ba 100644 --- a/drivers/mmc/host/moxart-mmc.c +++ b/drivers/mmc/host/moxart-mmc.c @@ -660,7 +660,9 @@ static int moxart_probe(struct platform_device *pdev) goto out;

dev_set_drvdata(dev, mmc); - mmc_add_host(mmc); + ret = mmc_add_host(mmc); + if (ret) + goto out;

dev_dbg(dev, "IRQ=%d, FIFO is %d bytes\n", irq, host->fifo_width);

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit fc38a5a10e9e5a75eb9189854abeb8405b214cc9 ]

mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path.

So fix this by checking the return value and calling mmc_free_host() in the error path, besides, led_classdev_unregister() and pm_runtime_disable() also need be called.

Fixes: c7f6558d84af ("mmc: Add realtek USB sdmmc host driver") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Link: https://lore.kernel.org/r/20221101063023.1664968-7-yangyingliang@huawei.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/rtsx_usb_sdmmc.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/rtsx_usb_sdmmc.c b/drivers/mmc/host/rtsx_usb_sdmmc.c index 9a3ff22dd0fe..1e5f54054a53 100644 --- a/drivers/mmc/host/rtsx_usb_sdmmc.c +++ b/drivers/mmc/host/rtsx_usb_sdmmc.c @@ -1344,6 +1344,7 @@ static int rtsx_usb_sdmmc_drv_probe(struct platform_device *pdev) #ifdef RTSX_USB_USE_LEDS_CLASS int err; #endif + int ret;

ucr = usb_get_intfdata(to_usb_interface(pdev->dev.parent)); if (!ucr) @@ -1382,7 +1383,15 @@ static int rtsx_usb_sdmmc_drv_probe(struct platform_device *pdev) INIT_WORK(&host->led_work, rtsx_usb_update_led);

#endif - mmc_add_host(mmc); + ret = mmc_add_host(mmc); + if (ret) { +#ifdef RTSX_USB_USE_LEDS_CLASS + led_classdev_unregister(&host->led); +#endif + mmc_free_host(mmc); + pm_runtime_disable(&pdev->dev); + return ret; + }

return 0; }

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit 0613ad2401f88bdeae5594c30afe318e93b14676 ]

mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, the timer added before mmc_add_host() needs be del.

And this patch fixes another missing call mmc_free_host() if usb_control_msg() fails.

Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Link: https://lore.kernel.org/r/20221101063023.1664968-9-yangyingliang@huawei.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/vub300.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c index aa8905753be3..59768cc18ac1 100644 --- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -2309,14 +2309,14 @@ static int vub300_probe(struct usb_interface *interface, 0x0000, 0x0000, &vub300->system_port_status, sizeof(vub300->system_port_status), 1000); if (retval < 0) { - goto error4; + goto error5; } else if (sizeof(vub300->system_port_status) == retval) { vub300->card_present = (0x0001 & vub300->system_port_status.port_flags) ? 1 : 0; vub300->read_only = (0x0010 & vub300->system_port_status.port_flags) ? 1 : 0; } else { - goto error4; + goto error5; } usb_set_intfdata(interface, vub300); INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread); @@ -2339,8 +2339,13 @@ static int vub300_probe(struct usb_interface *interface, "USB vub300 remote SDIO host controller[%d]" "connected with no SD/SDIO card inserted\n", interface_to_InterfaceNumber(interface)); - mmc_add_host(mmc); + retval = mmc_add_host(mmc); + if (retval) + goto error6; + return 0; +error6: + del_timer_sync(&vub300->inactivity_timer); error5: mmc_free_host(mmc); /*

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit 9e6e8c43726673ca2abcaac87640b9215fd72f4c ]

mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del().

So fix this by checking the return value and calling mmc_free_host() in the error path.

Fixes: 7d2be0749a59 ("atmel-mci: Driver for Atmel on-chip MMC controllers") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Link: https://lore.kernel.org/r/20221108122819.429975-1-yangyingliang@huawei.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/atmel-mci.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index fbc56ee99682..d40bab3d9f4a 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -2262,6 +2262,7 @@ static int atmci_init_slot(struct atmel_mci *host, { struct mmc_host *mmc; struct atmel_mci_slot *slot; + int ret;

mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev); if (!mmc) @@ -2342,11 +2343,13 @@ static int atmci_init_slot(struct atmel_mci *host,

host->slot[id] = slot; mmc_regulator_get_supply(mmc); - mmc_add_host(mmc); + ret = mmc_add_host(mmc); + if (ret) { + mmc_free_host(mmc); + return ret; + }

if (gpio_is_valid(slot->detect_pin)) { - int ret; - timer_setup(&slot->detect_timer, atmci_detect_change, 0);

ret = request_irq(gpio_to_irq(slot->detect_pin),

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit e4e46fb61e3bb4628170810d3f2b996b709b90d9 ]

mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del().

Fix this by checking the return value and goto error path which will call mmc_free_host().

Fixes: f0bf7f61b840 ("mmc: Add new via-sdmmc host controller driver") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Link: https://lore.kernel.org/r/20221108130949.1067699-1-yangyingliang@huawei.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/via-sdmmc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c index 1b66466d2ed4..b78e96b5289b 100644 --- a/drivers/mmc/host/via-sdmmc.c +++ b/drivers/mmc/host/via-sdmmc.c @@ -1166,7 +1166,9 @@ static int via_sd_probe(struct pci_dev *pcidev, pcidev->subsystem_device == 0x3891) sdhost->quirks = VIA_CRDR_QUIRK_300MS_PWRDELAY;

- mmc_add_host(mmc); + ret = mmc_add_host(mmc); + if (ret) + goto unmap;

return 0;

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit b38a20f29a49ae04d23750d104b25400b792b98c ]

mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del().

So fix this by checking the return value and goto error path which will call mmc_free_host().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Link: https://lore.kernel.org/r/20221109133539.3275664-1-yangyingliang@huawei.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/mmci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index fa6268c0f123..434ba4a39ded 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1808,7 +1808,9 @@ static int mmci_probe(struct amba_device *dev, pm_runtime_set_autosuspend_delay(&dev->dev, 50); pm_runtime_use_autosuspend(&dev->dev);

- mmc_add_host(mmc); + ret = mmc_add_host(mmc); + if (ret) + goto clk_disable;

pm_runtime_put(&dev->dev); return 0;

From: Jiasheng Jiang jiasheng@iscas.ac.cn

[ Upstream commit 6b8082238fb8bb20f67e46388123e67a5bbc558d ]

As the coda_iram_alloc may return NULL pointer, it should be better to check the return value in order to avoid NULL poineter dereference, same as the others.

Fixes: b313bcc9a467 ("[media] coda: simplify IRAM setup") Signed-off-by: Jiasheng Jiang jiasheng@iscas.ac.cn Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/coda/coda-bit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/coda/coda-bit.c b/drivers/media/platform/coda/coda-bit.c index c3eaddced721..57b62076b1ba 100644 --- a/drivers/media/platform/coda/coda-bit.c +++ b/drivers/media/platform/coda/coda-bit.c @@ -670,7 +670,7 @@ static void coda_setup_iram(struct coda_ctx *ctx) /* Only H.264BP and H.263P3 are considered */ iram_info->buf_dbk_y_use = coda_iram_alloc(iram_info, w64); iram_info->buf_dbk_c_use = coda_iram_alloc(iram_info, w64); - if (!iram_info->buf_dbk_c_use) + if (!iram_info->buf_dbk_y_use || !iram_info->buf_dbk_c_use) goto out; iram_info->axi_sram_use |= dbk_bits;

@@ -694,7 +694,7 @@ static void coda_setup_iram(struct coda_ctx *ctx)

iram_info->buf_dbk_y_use = coda_iram_alloc(iram_info, w128); iram_info->buf_dbk_c_use = coda_iram_alloc(iram_info, w128); - if (!iram_info->buf_dbk_c_use) + if (!iram_info->buf_dbk_y_use || !iram_info->buf_dbk_c_use) goto out; iram_info->axi_sram_use |= dbk_bits;

From: Xiu Jianfeng xiujianfeng@huawei.com

[ Upstream commit 5174e5b0d1b669a489524192b6adcbb3c54ebc72 ]

If clk_register() fails, @pll->rate_table may have allocated memory by kmemdup(), so it needs to be freed, otherwise will cause memory leak issue, this patch fixes it.

Fixes: 3ff6e0d8d64d ("clk: samsung: Add support to register rate_table for samsung plls") Signed-off-by: Xiu Jianfeng xiujianfeng@huawei.com Link: https://lore.kernel.org/r/20221123032015.63980-1-xiujianfeng@huawei.com Reviewed-by: Alim Akhtar alim.akhtar@samsung.com Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/samsung/clk-pll.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c index 1c4c7a3039f1..8cbf0f2cf196 100644 --- a/drivers/clk/samsung/clk-pll.c +++ b/drivers/clk/samsung/clk-pll.c @@ -1392,6 +1392,7 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx, if (ret) { pr_err("%s: failed to register pll clock %s : %d\n", __func__, pll_clk->name, ret); + kfree(pll->rate_table); kfree(pll); return; }

From: Chris Chiu chiu@endlessm.com

[ Upstream commit a66b8b4108f178f34394681232c7df07e9b0f6be ]

There's a data field in H2C and C2H commands which is used to carry channel bandwidth information. Add enumeration to make it more descriptive in code.

Signed-off-by: Chris Chiu chiu@endlessm.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20200320063833.1058-2-chiu@endlessm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 9 +++++++++ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index 7eef3f7c36ad..921a226b18f8 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1136,6 +1136,15 @@ enum bt_mp_oper_opcode_8723b { BT_MP_OP_ENABLE_CFO_TRACKING = 0x24, };

+enum rtl8xxxu_bw_mode { + RTL8XXXU_CHANNEL_WIDTH_20 = 0, + RTL8XXXU_CHANNEL_WIDTH_40 = 1, + RTL8XXXU_CHANNEL_WIDTH_80 = 2, + RTL8XXXU_CHANNEL_WIDTH_160 = 3, + RTL8XXXU_CHANNEL_WIDTH_80_80 = 4, + RTL8XXXU_CHANNEL_WIDTH_MAX = 5, +}; + struct rtl8723bu_c2h { u8 id; u8 seq; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index fb8545f79fa6..c3c8382dd0ba 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -4333,7 +4333,7 @@ void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv, u32 ramask, int sgi) { struct h2c_cmd h2c; - u8 bw = 0; + u8 bw = RTL8XXXU_CHANNEL_WIDTH_20;

memset(&h2c, 0, sizeof(struct h2c_cmd));