From: Martin Blumenstingl martin.blumenstingl@googlemail.com

commit 4881873f4cc1460f63d85fa81363d56be328ccdc upstream.

According to the public S805 datasheet the RESET2 register uses the following bits for the PIC_DC, PSC and NAND reset lines: - PIC_DC is at bit 3 (meaning: RESET_VD_RMEM + 3) - PSC is at bit 4 (meaning: RESET_VD_RMEM + 4) - NAND is at bit 5 (meaning: RESET_VD_RMEM + 4)

Update the reset IDs of these three reset lines so they don't conflict with PIC_DC and map to the actual hardware reset lines.

Fixes: 79795e20a184eb ("dt-bindings: reset: Add bindings for the Meson SoC Reset Controller") Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Signed-off-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- include/dt-bindings/reset/amlogic,meson8b-reset.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/include/dt-bindings/reset/amlogic,meson8b-reset.h +++ b/include/dt-bindings/reset/amlogic,meson8b-reset.h @@ -95,9 +95,9 @@ #define RESET_VD_RMEM 64 #define RESET_AUDIN 65 #define RESET_DBLK 66 -#define RESET_PIC_DC 66 -#define RESET_PSC 66 -#define RESET_NAND 66 +#define RESET_PIC_DC 67 +#define RESET_PSC 68 +#define RESET_NAND 69 #define RESET_GE2D 70 #define RESET_PARSER_REG 71 #define RESET_PARSER_FETCH 72

From: Stephan Gerhold stephan@gerhold.net

commit e0beec88397b163c7c4ea6fcfb67e8e07a2671dc upstream.

MIC BIAS External1 sets pm8916_wcd_analog_enable_micbias_ext1() as event handler, which ends up in pm8916_wcd_analog_enable_micbias_ext().

But pm8916_wcd_analog_enable_micbias_ext() only handles the POST_PMU event, which is not specified in the event flags for MIC BIAS External1. This means that the code in the event handler is never actually run.

Set SND_SOC_DAPM_POST_PMU as the only event for the handler to fix this.

Fixes: 585e881e5b9e ("ASoC: codecs: Add msm8916-wcd analog codec") Cc: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Stephan Gerhold stephan@gerhold.net Link: https://lore.kernel.org/r/20200111164006.43074-2-stephan@gerhold.net Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/soc/codecs/msm8916-wcd-analog.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/soc/codecs/msm8916-wcd-analog.c +++ b/sound/soc/codecs/msm8916-wcd-analog.c @@ -876,10 +876,10 @@ static const struct snd_soc_dapm_widget

SND_SOC_DAPM_SUPPLY("MIC BIAS External1", CDC_A_MICB_1_EN, 7, 0, pm8916_wcd_analog_enable_micbias_ext1, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_POST_PMU), SND_SOC_DAPM_SUPPLY("MIC BIAS External2", CDC_A_MICB_2_EN, 7, 0, pm8916_wcd_analog_enable_micbias_ext2, - SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_POST_PMU),

SND_SOC_DAPM_ADC_E("ADC1", NULL, CDC_A_TX_1_EN, 7, 0, pm8916_wcd_analog_enable_adc,

From: Jari Ruusu jari.ruusu@gmail.com

commit f5ae2ea6347a308cfe91f53b53682ce635497d0d upstream.

Intel Software Developer's Manual, volume 3, chapter 9.11.6 says:

"Note that the microcode update must be aligned on a 16-byte boundary and the size of the microcode update must be 1-KByte granular"

When early-load Intel microcode is loaded from initramfs, userspace tool 'iucode_tool' has already 16-byte aligned those microcode bits in that initramfs image. Image that was created something like this:

iucode_tool --write-earlyfw=FOO.cpio microcode-files...

However, when early-load Intel microcode is loaded from built-in firmware BLOB using CONFIG_EXTRA_FIRMWARE= kernel config option, that 16-byte alignment is not guaranteed.

Fix this by forcing all built-in firmware BLOBs to 16-byte alignment.

[ If we end up having other firmware with much bigger alignment requirements, we might need to introduce some method for the firmware to specify it, this is the minimal "just increase the alignment a bit to account for this one special case" patch - Linus ]

Signed-off-by: Jari Ruusu jari.ruusu@gmail.com Cc: Borislav Petkov bp@alien8.de Cc: Fenghua Yu fenghua.yu@intel.com Cc: Luis Chamberlain mcgrof@kernel.org Cc: stable@kernel.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- firmware/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/firmware/Makefile +++ b/firmware/Makefile @@ -19,7 +19,7 @@ quiet_cmd_fwbin = MK_FW $@ PROGBITS=$(if $(CONFIG_ARM),%,@)progbits; \ echo "/* Generated by firmware/Makefile */" > $@;\ echo " .section .rodata" >>$@;\ - echo " .p2align $${ASM_ALIGN}" >>$@;\ + echo " .p2align 4" >>$@;\ echo "_fw_$${FWSTR}_bin:" >>$@;\ echo " .incbin "$(2)"" >>$@;\ echo "_fw_end:" >>$@;\

From: Kishon Vijay Abraham I kishon@ti.com

commit 0c4eb2a6b3c6b0facd0a3bccda5db22e7b3b6f96 upstream.

commit d23f3839fe97d8dce03d ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") while adding the dt node for EP mode for DRA7 platform, added rc node for am571x-idk and populated gpios property with "gpio3 23". However the GPIO_PCIE_SWRST line is actually connected to "gpio5 18". Fix it here. (The patch adding "gpio3 23" was tested with another am57x board in EP mode which doesn't rely on reset from host).

Cc: stable stable@vger.kernel.org # 4.14+ Fixes: d23f3839fe97d8dce03d ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/boot/dts/am571x-idk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -93,7 +93,7 @@

&pcie1_rc { status = "okay"; - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; };

&pcie1_ep {

From: Jerónimo Borque jeronimo@borque.com.ar

commit 260e41ac4dd3e5acb90be624c03ba7f019615b75 upstream.

Add device-ids for the Motorola Solutions TETRA radios MTP3xxx series and MTP85xx series

$ lsusb -vd 0cad:

Bus 001 Device 009: ID 0cad:9015 Motorola CGISS TETRA PEI interface Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9015 bcdDevice 24.16 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0037 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0

Bus 001 Device 010: ID 0cad:9013 Motorola CGISS TETRA PEI interface Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9013 bcdDevice 24.16 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0037 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0

Signed-off-by: Jerónimo Borque jeronimo@borque.com.ar Cc: stable stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/usb-serial-simple.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -89,6 +89,8 @@ DEVICE(moto_modem, MOTO_IDS); #define MOTOROLA_TETRA_IDS() \ { USB_DEVICE(0x0cad, 0x9011) }, /* Motorola Solutions TETRA PEI */ \ { USB_DEVICE(0x0cad, 0x9012) }, /* MTP6550 */ \ + { USB_DEVICE(0x0cad, 0x9013) }, /* MTP3xxx */ \ + { USB_DEVICE(0x0cad, 0x9015) }, /* MTP85xx */ \ { USB_DEVICE(0x0cad, 0x9016) } /* TPG2200 */ DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS);

From: Johan Hovold johan@kernel.org

commit 5e28055f340275a8616eee88ef19186631b4d136 upstream.

The driver was issuing synchronous uninterruptible control requests without using a timeout. This could lead to the driver hanging on open() or tiocmset() due to a malfunctioning (or malicious) device until the device is physically disconnected.

The USB upper limit of five seconds per request should be more than enough.

Fixes: 309a057932ab ("USB: opticon: add rts and cts support") Cc: stable stable@vger.kernel.org # 2.6.39 Cc: Martin Jansen martin.jansen@opticon.com Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/opticon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -116,7 +116,7 @@ static int send_control_msg(struct usb_s retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), requesttype, USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, - 0, 0, buffer, 1, 0); + 0, 0, buffer, 1, USB_CTRL_SET_TIMEOUT); kfree(buffer);

if (retval < 0)

From: Johan Hovold johan@kernel.org

commit fdb838efa31e1ed9a13ae6ad0b64e30fdbd00570 upstream.

USB-serial drivers must not be unbound from their ports before the corresponding USB driver is unbound from the parent interface so suppress the bind and unbind attributes.

Unbinding a serial driver while it's port is open is a sure way to trigger a crash as any driver state is released on unbind while port hangup is handled on the parent USB interface level. Drivers for multiport devices where ports share a resource such as an interrupt endpoint also generally cannot handle individual ports going away.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/usb-serial.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1332,6 +1332,9 @@ static int usb_serial_register(struct us return -EINVAL; }

+ /* Prevent individual ports from being unbound. */ + driver->driver.suppress_bind_attrs = true; + usb_serial_operations_init(driver);

/* Add this device to our list of devices */

From: Johan Hovold johan@kernel.org

commit 1568c58d11a7c851bd09341aeefd6a1c308ac40d upstream.

The driver receives the active port number from the device, but never made sure that the port number was valid. This could lead to a NULL-pointer dereference or memory corruption in case a device sends data for an invalid port.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/io_edgeport.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -1733,7 +1733,8 @@ static void edge_break(struct tty_struct static void process_rcvd_data(struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength) { - struct device *dev = &edge_serial->serial->dev->dev; + struct usb_serial *serial = edge_serial->serial; + struct device *dev = &serial->dev->dev; struct usb_serial_port *port; struct edgeport_port *edge_port; __u16 lastBufferLength; @@ -1838,9 +1839,8 @@ static void process_rcvd_data(struct edg

/* spit this data back into the tty driver if this port is open */ - if (rxLen) { - port = edge_serial->serial->port[ - edge_serial->rxPort]; + if (rxLen && edge_serial->rxPort < serial->num_ports) { + port = serial->port[edge_serial->rxPort]; edge_port = usb_get_serial_port_data(port); if (edge_port->open) { dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n", @@ -1850,8 +1850,8 @@ static void process_rcvd_data(struct edg rxLen); edge_port->port->icount.rx += rxLen; } - buffer += rxLen; } + buffer += rxLen; break;

case EXPECT_HDR3: /* Expect 3rd byte of status header */ @@ -1886,6 +1886,8 @@ static void process_rcvd_status(struct e __u8 code = edge_serial->rxStatusCode;

/* switch the port pointer to the one being currently talked about */ + if (edge_serial->rxPort >= edge_serial->serial->num_ports) + return; port = edge_serial->serial->port[edge_serial->rxPort]; edge_port = usb_get_serial_port_data(port); if (edge_port == NULL) {

From: Johan Hovold johan@kernel.org

commit 9715a43eea77e42678a1002623f2d9a78f5b81a1 upstream.

Check for NULL port data in the modem- and line-status handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe).

Note that the other (stubbed) event handlers qt2_process_xmit_empty() and qt2_process_flush() would need similar sanity checks in case they are ever implemented.

Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable stable@vger.kernel.org # 3.5 Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/quatech2.c | 6 ++++++ 1 file changed, 6 insertions(+)

--- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -867,7 +867,10 @@ static void qt2_update_msr(struct usb_se u8 newMSR = (u8) *ch; unsigned long flags;

+ /* May be called from qt2_process_read_urb() for an unbound port. */ port_priv = usb_get_serial_port_data(port); + if (!port_priv) + return;

spin_lock_irqsave(&port_priv->lock, flags); port_priv->shadowMSR = newMSR; @@ -895,7 +898,10 @@ static void qt2_update_lsr(struct usb_se unsigned long flags; u8 newLSR = (u8) *ch;

+ /* May be called from qt2_process_read_urb() for an unbound port. */ port_priv = usb_get_serial_port_data(port); + if (!port_priv) + return;

if (newLSR & UART_LSR_BI) newLSR &= (u8) (UART_LSR_OE | UART_LSR_BI);

From: Dan Carpenter dan.carpenter@oracle.com

commit 28d76df18f0ad5bcf5fa48510b225f0ed262a99b upstream.

Tom Hatskevich reported that we look up "iocp" then, in the called functions we do a second copy_from_user() and look it up again. The problem that could cause is:

drivers/message/fusion/mptctl.c 674 /* All of these commands require an interrupt or 675 * are unknown/illegal. 676 */ 677 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0) ^^^^ We take this lock.

678 return ret; 679 680 if (cmd == MPTFWDOWNLOAD) 681 ret = mptctl_fw_download(arg); ^^^ Then the user memory changes and we look up "iocp" again but a different one so now we are holding the incorrect lock and have a race condition.

682 else if (cmd == MPTCOMMAND) 683 ret = mptctl_mpt_command(arg);

The security impact of this bug is not as bad as it could have been because these operations are all privileged and root already has enormous destructive power. But it's still worth fixing.

This patch passes the "iocp" pointer to the functions to avoid the second lookup. That deletes 100 lines of code from the driver so it's a nice clean up as well.

Link: https://lore.kernel.org/r/20200114123414.GA7957@kadam Reported-by: Tom Hatskevich tom2001tom.23@gmail.com Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/message/fusion/mptctl.c | 213 +++++++++------------------------------- 1 file changed, 50 insertions(+), 163 deletions(-)

--- a/drivers/message/fusion/mptctl.c +++ b/drivers/message/fusion/mptctl.c @@ -100,19 +100,19 @@ struct buflist { * Function prototypes. Called from OS entry point mptctl_ioctl. * arg contents specific to function. */ -static int mptctl_fw_download(unsigned long arg); -static int mptctl_getiocinfo(unsigned long arg, unsigned int cmd); -static int mptctl_gettargetinfo(unsigned long arg); -static int mptctl_readtest(unsigned long arg); -static int mptctl_mpt_command(unsigned long arg); -static int mptctl_eventquery(unsigned long arg); -static int mptctl_eventenable(unsigned long arg); -static int mptctl_eventreport(unsigned long arg); -static int mptctl_replace_fw(unsigned long arg); - -static int mptctl_do_reset(unsigned long arg); -static int mptctl_hp_hostinfo(unsigned long arg, unsigned int cmd); -static int mptctl_hp_targetinfo(unsigned long arg); +static int mptctl_fw_download(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_getiocinfo(MPT_ADAPTER *iocp, unsigned long arg, unsigned int cmd); +static int mptctl_gettargetinfo(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_readtest(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_mpt_command(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_eventquery(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_eventenable(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_eventreport(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_replace_fw(MPT_ADAPTER *iocp, unsigned long arg); + +static int mptctl_do_reset(MPT_ADAPTER *iocp, unsigned long arg); +static int mptctl_hp_hostinfo(MPT_ADAPTER *iocp, unsigned long arg, unsigned int cmd); +static int mptctl_hp_targetinfo(MPT_ADAPTER *iocp, unsigned long arg);

static int mptctl_probe(struct pci_dev *, const struct pci_device_id *); static void mptctl_remove(struct pci_dev *); @@ -123,8 +123,8 @@ static long compat_mpctl_ioctl(struct fi /* * Private function calls. */ -static int mptctl_do_mpt_command(struct mpt_ioctl_command karg, void __user *mfPtr); -static int mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen); +static int mptctl_do_mpt_command(MPT_ADAPTER *iocp, struct mpt_ioctl_command karg, void __user *mfPtr); +static int mptctl_do_fw_download(MPT_ADAPTER *iocp, char __user *ufwbuf, size_t fwlen); static MptSge_t *kbuf_alloc_2_sgl(int bytes, u32 dir, int sge_offset, int *frags, struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc); static void kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma, @@ -656,19 +656,19 @@ __mptctl_ioctl(struct file *file, unsign * by TM and FW reloads. */ if ((cmd & ~IOCSIZE_MASK) == (MPTIOCINFO & ~IOCSIZE_MASK)) { - return mptctl_getiocinfo(arg, _IOC_SIZE(cmd)); + return mptctl_getiocinfo(iocp, arg, _IOC_SIZE(cmd)); } else if (cmd == MPTTARGETINFO) { - return mptctl_gettargetinfo(arg); + return mptctl_gettargetinfo(iocp, arg); } else if (cmd == MPTTEST) { - return mptctl_readtest(arg); + return mptctl_readtest(iocp, arg); } else if (cmd == MPTEVENTQUERY) { - return mptctl_eventquery(arg); + return mptctl_eventquery(iocp, arg); } else if (cmd == MPTEVENTENABLE) { - return mptctl_eventenable(arg); + return mptctl_eventenable(iocp, arg); } else if (cmd == MPTEVENTREPORT) { - return mptctl_eventreport(arg); + return mptctl_eventreport(iocp, arg); } else if (cmd == MPTFWREPLACE) { - return mptctl_replace_fw(arg); + return mptctl_replace_fw(iocp, arg); }

/* All of these commands require an interrupt or @@ -678,15 +678,15 @@ __mptctl_ioctl(struct file *file, unsign return ret;

if (cmd == MPTFWDOWNLOAD) - ret = mptctl_fw_download(arg); + ret = mptctl_fw_download(iocp, arg); else if (cmd == MPTCOMMAND) - ret = mptctl_mpt_command(arg); + ret = mptctl_mpt_command(iocp, arg); else if (cmd == MPTHARDRESET) - ret = mptctl_do_reset(arg); + ret = mptctl_do_reset(iocp, arg); else if ((cmd & ~IOCSIZE_MASK) == (HP_GETHOSTINFO & ~IOCSIZE_MASK)) - ret = mptctl_hp_hostinfo(arg, _IOC_SIZE(cmd)); + ret = mptctl_hp_hostinfo(iocp, arg, _IOC_SIZE(cmd)); else if (cmd == HP_GETTARGETINFO) - ret = mptctl_hp_targetinfo(arg); + ret = mptctl_hp_targetinfo(iocp, arg); else ret = -EINVAL;

@@ -705,11 +705,10 @@ mptctl_ioctl(struct file *file, unsigned return ret; }

-static int mptctl_do_reset(unsigned long arg) +static int mptctl_do_reset(MPT_ADAPTER *iocp, unsigned long arg) { struct mpt_ioctl_diag_reset __user *urinfo = (void __user *) arg; struct mpt_ioctl_diag_reset krinfo; - MPT_ADAPTER *iocp;

if (copy_from_user(&krinfo, urinfo, sizeof(struct mpt_ioctl_diag_reset))) { printk(KERN_ERR MYNAM "%s@%d::mptctl_do_reset - " @@ -718,12 +717,6 @@ static int mptctl_do_reset(unsigned long return -EFAULT; }

- if (mpt_verify_adapter(krinfo.hdr.iocnum, &iocp) < 0) { - printk(KERN_DEBUG MYNAM "%s@%d::mptctl_do_reset - ioc%d not found!\n", - __FILE__, __LINE__, krinfo.hdr.iocnum); - return -ENODEV; /* (-6) No such device or address */ - } - dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "mptctl_do_reset called.\n", iocp->name));

@@ -754,7 +747,7 @@ static int mptctl_do_reset(unsigned long * -ENOMSG if FW upload returned bad status */ static int -mptctl_fw_download(unsigned long arg) +mptctl_fw_download(MPT_ADAPTER *iocp, unsigned long arg) { struct mpt_fw_xfer __user *ufwdl = (void __user *) arg; struct mpt_fw_xfer kfwdl; @@ -766,7 +759,7 @@ mptctl_fw_download(unsigned long arg) return -EFAULT; }

- return mptctl_do_fw_download(kfwdl.iocnum, kfwdl.bufp, kfwdl.fwlen); + return mptctl_do_fw_download(iocp, kfwdl.bufp, kfwdl.fwlen); }

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -784,11 +777,10 @@ mptctl_fw_download(unsigned long arg) * -ENOMSG if FW upload returned bad status */ static int -mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen) +mptctl_do_fw_download(MPT_ADAPTER *iocp, char __user *ufwbuf, size_t fwlen) { FWDownload_t *dlmsg; MPT_FRAME_HDR *mf; - MPT_ADAPTER *iocp; FWDownloadTCSGE_t *ptsge; MptSge_t *sgl, *sgIn; char *sgOut; @@ -808,17 +800,10 @@ mptctl_do_fw_download(int ioc, char __us pFWDownloadReply_t ReplyMsg = NULL; unsigned long timeleft;

- if (mpt_verify_adapter(ioc, &iocp) < 0) { - printk(KERN_DEBUG MYNAM "ioctl_fwdl - ioc%d not found!\n", - ioc); - return -ENODEV; /* (-6) No such device or address */ - } else { - - /* Valid device. Get a message frame and construct the FW download message. - */ - if ((mf = mpt_get_msg_frame(mptctl_id, iocp)) == NULL) - return -EAGAIN; - } + /* Valid device. Get a message frame and construct the FW download message. + */ + if ((mf = mpt_get_msg_frame(mptctl_id, iocp)) == NULL) + return -EAGAIN;

dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "mptctl_do_fwdl called. mptctl_id = %xh.\n", iocp->name, mptctl_id)); @@ -826,8 +811,6 @@ mptctl_do_fw_download(int ioc, char __us iocp->name, ufwbuf)); dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.fwlen = %d\n", iocp->name, (int)fwlen)); - dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.ioc = %04xh\n", - iocp->name, ioc));

dlmsg = (FWDownload_t*) mf; ptsge = (FWDownloadTCSGE_t *) &dlmsg->SGL; @@ -1238,13 +1221,11 @@ kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_ * -ENODEV if no such device/adapter */ static int -mptctl_getiocinfo (unsigned long arg, unsigned int data_size) +mptctl_getiocinfo (MPT_ADAPTER *ioc, unsigned long arg, unsigned int data_size) { struct mpt_ioctl_iocinfo __user *uarg = (void __user *) arg; struct mpt_ioctl_iocinfo *karg; - MPT_ADAPTER *ioc; struct pci_dev *pdev; - int iocnum; unsigned int port; int cim_rev; struct scsi_device *sdev; @@ -1272,14 +1253,6 @@ mptctl_getiocinfo (unsigned long arg, un return PTR_ERR(karg); }

- if (((iocnum = mpt_verify_adapter(karg->hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_getiocinfo() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - kfree(karg); - return -ENODEV; - } - /* Verify the data transfer size is correct. */ if (karg->hdr.maxDataSize != data_size) { printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_getiocinfo - " @@ -1385,15 +1358,13 @@ mptctl_getiocinfo (unsigned long arg, un * -ENODEV if no such device/adapter */ static int -mptctl_gettargetinfo (unsigned long arg) +mptctl_gettargetinfo (MPT_ADAPTER *ioc, unsigned long arg) { struct mpt_ioctl_targetinfo __user *uarg = (void __user *) arg; struct mpt_ioctl_targetinfo karg; - MPT_ADAPTER *ioc; VirtDevice *vdevice; char *pmem; int *pdata; - int iocnum; int numDevices = 0; int lun; int maxWordsLeft; @@ -1408,13 +1379,6 @@ mptctl_gettargetinfo (unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_gettargetinfo() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } - dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_gettargetinfo called.\n", ioc->name)); /* Get the port number and set the maximum number of bytes @@ -1510,12 +1474,10 @@ mptctl_gettargetinfo (unsigned long arg) * -ENODEV if no such device/adapter */ static int -mptctl_readtest (unsigned long arg) +mptctl_readtest (MPT_ADAPTER *ioc, unsigned long arg) { struct mpt_ioctl_test __user *uarg = (void __user *) arg; struct mpt_ioctl_test karg; - MPT_ADAPTER *ioc; - int iocnum;

if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_test))) { printk(KERN_ERR MYNAM "%s@%d::mptctl_readtest - " @@ -1524,13 +1486,6 @@ mptctl_readtest (unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_readtest() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } - dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_readtest called.\n", ioc->name)); /* Fill in the data and return the structure to the calling @@ -1571,12 +1526,10 @@ mptctl_readtest (unsigned long arg) * -ENODEV if no such device/adapter */ static int -mptctl_eventquery (unsigned long arg) +mptctl_eventquery (MPT_ADAPTER *ioc, unsigned long arg) { struct mpt_ioctl_eventquery __user *uarg = (void __user *) arg; struct mpt_ioctl_eventquery karg; - MPT_ADAPTER *ioc; - int iocnum;

if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventquery))) { printk(KERN_ERR MYNAM "%s@%d::mptctl_eventquery - " @@ -1585,13 +1538,6 @@ mptctl_eventquery (unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_eventquery() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } - dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventquery called.\n", ioc->name)); karg.eventEntries = MPTCTL_EVENT_LOG_SIZE; @@ -1610,12 +1556,10 @@ mptctl_eventquery (unsigned long arg)

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ static int -mptctl_eventenable (unsigned long arg) +mptctl_eventenable (MPT_ADAPTER *ioc, unsigned long arg) { struct mpt_ioctl_eventenable __user *uarg = (void __user *) arg; struct mpt_ioctl_eventenable karg; - MPT_ADAPTER *ioc; - int iocnum;

if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventenable))) { printk(KERN_ERR MYNAM "%s@%d::mptctl_eventenable - " @@ -1624,13 +1568,6 @@ mptctl_eventenable (unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_eventenable() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } - dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventenable called.\n", ioc->name)); if (ioc->events == NULL) { @@ -1658,12 +1595,10 @@ mptctl_eventenable (unsigned long arg)

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ static int -mptctl_eventreport (unsigned long arg) +mptctl_eventreport (MPT_ADAPTER *ioc, unsigned long arg) { struct mpt_ioctl_eventreport __user *uarg = (void __user *) arg; struct mpt_ioctl_eventreport karg; - MPT_ADAPTER *ioc; - int iocnum; int numBytes, maxEvents, max;

if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventreport))) { @@ -1673,12 +1608,6 @@ mptctl_eventreport (unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_eventreport() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventreport called.\n", ioc->name));

@@ -1712,12 +1641,10 @@ mptctl_eventreport (unsigned long arg)

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ static int -mptctl_replace_fw (unsigned long arg) +mptctl_replace_fw (MPT_ADAPTER *ioc, unsigned long arg) { struct mpt_ioctl_replace_fw __user *uarg = (void __user *) arg; struct mpt_ioctl_replace_fw karg; - MPT_ADAPTER *ioc; - int iocnum; int newFwSize;

if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_replace_fw))) { @@ -1727,13 +1654,6 @@ mptctl_replace_fw (unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_replace_fw() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } - dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_replace_fw called.\n", ioc->name)); /* If caching FW, Free the old FW image @@ -1780,12 +1700,10 @@ mptctl_replace_fw (unsigned long arg) * -ENOMEM if memory allocation error */ static int -mptctl_mpt_command (unsigned long arg) +mptctl_mpt_command (MPT_ADAPTER *ioc, unsigned long arg) { struct mpt_ioctl_command __user *uarg = (void __user *) arg; struct mpt_ioctl_command karg; - MPT_ADAPTER *ioc; - int iocnum; int rc;

@@ -1796,14 +1714,7 @@ mptctl_mpt_command (unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_mpt_command() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } - - rc = mptctl_do_mpt_command (karg, &uarg->MF); + rc = mptctl_do_mpt_command (ioc, karg, &uarg->MF);

return rc; } @@ -1821,9 +1732,8 @@ mptctl_mpt_command (unsigned long arg) * -EPERM if SCSI I/O and target is untagged */ static int -mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr) +mptctl_do_mpt_command (MPT_ADAPTER *ioc, struct mpt_ioctl_command karg, void __user *mfPtr) { - MPT_ADAPTER *ioc; MPT_FRAME_HDR *mf = NULL; MPIHeader_t *hdr; char *psge; @@ -1832,7 +1742,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_ dma_addr_t dma_addr_in; dma_addr_t dma_addr_out; int sgSize = 0; /* Num SG elements */ - int iocnum, flagsLength; + int flagsLength; int sz, rc = 0; int msgContext; u16 req_idx; @@ -1847,13 +1757,6 @@ mptctl_do_mpt_command (struct mpt_ioctl_ bufIn.kptr = bufOut.kptr = NULL; bufIn.len = bufOut.len = 0;

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_do_mpt_command() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } - spin_lock_irqsave(&ioc->taskmgmt_lock, flags); if (ioc->ioc_reset_in_progress) { spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); @@ -2418,17 +2321,15 @@ done_free_mem: * -ENOMEM if memory allocation error */ static int -mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size) +mptctl_hp_hostinfo(MPT_ADAPTER *ioc, unsigned long arg, unsigned int data_size) { hp_host_info_t __user *uarg = (void __user *) arg; - MPT_ADAPTER *ioc; struct pci_dev *pdev; char *pbuf=NULL; dma_addr_t buf_dma; hp_host_info_t karg; CONFIGPARMS cfg; ConfigPageHeader_t hdr; - int iocnum; int rc, cim_rev; ToolboxIstwiReadWriteRequest_t *IstwiRWRequest; MPT_FRAME_HDR *mf = NULL; @@ -2452,12 +2353,6 @@ mptctl_hp_hostinfo(unsigned long arg, un return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_hp_hostinfo() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": mptctl_hp_hostinfo called.\n", ioc->name));

@@ -2670,15 +2565,13 @@ retry_wait: * -ENOMEM if memory allocation error */ static int -mptctl_hp_targetinfo(unsigned long arg) +mptctl_hp_targetinfo(MPT_ADAPTER *ioc, unsigned long arg) { hp_target_info_t __user *uarg = (void __user *) arg; SCSIDevicePage0_t *pg0_alloc; SCSIDevicePage3_t *pg3_alloc; - MPT_ADAPTER *ioc; MPT_SCSI_HOST *hd = NULL; hp_target_info_t karg; - int iocnum; int data_sz; dma_addr_t page_dma; CONFIGPARMS cfg; @@ -2692,12 +2585,6 @@ mptctl_hp_targetinfo(unsigned long arg) return -EFAULT; }

- if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || - (ioc == NULL)) { - printk(KERN_DEBUG MYNAM "%s::mptctl_hp_targetinfo() @%d - ioc%d not found!\n", - __FILE__, __LINE__, iocnum); - return -ENODEV; - } if (karg.hdr.id >= MPT_MAX_FC_DEVICES) return -EINVAL; dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_hp_targetinfo called.\n", @@ -2865,7 +2752,7 @@ compat_mptfwxfer_ioctl(struct file *filp kfw.fwlen = kfw32.fwlen; kfw.bufp = compat_ptr(kfw32.bufp);

- ret = mptctl_do_fw_download(kfw.iocnum, kfw.bufp, kfw.fwlen); + ret = mptctl_do_fw_download(iocp, kfw.bufp, kfw.fwlen);

mutex_unlock(&iocp->ioctl_cmds.mutex);

@@ -2919,7 +2806,7 @@ compat_mpt_command(struct file *filp, un

/* Pass new structure to do_mpt_command */ - ret = mptctl_do_mpt_command (karg, &uarg->MF); + ret = mptctl_do_mpt_command (iocp, karg, &uarg->MF);

mutex_unlock(&iocp->ioctl_cmds.mutex);

From: Qian Cai cai@lca.pw

commit e278af89f1ba0a9ef20947db6afc2c9afa37e85b upstream.

A system that supports resource monitoring may have multiple resources while not all of these resources are capable of monitoring. Monitoring related state is initialized only for resources that are capable of monitoring and correspondingly this state should subsequently only be removed from these resources that are capable of monitoring.

domain_add_cpu() calls domain_setup_mon_state() only when r->mon_capable is true where it will initialize d->mbm_over. However, domain_remove_cpu() calls cancel_delayed_work(&d->mbm_over) without checking r->mon_capable resulting in an attempt to cancel d->mbm_over on all resources, even those that never initialized d->mbm_over because they are not capable of monitoring. Hence, it triggers a debugobjects warning when offlining CPUs because those timer debugobjects are never initialized:

ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0 WARNING: CPU: 143 PID: 789 at lib/debugobjects.c:484 debug_print_object Hardware name: HP Synergy 680 Gen9/Synergy 680 Gen9 Compute Module, BIOS I40 05/23/2018 RIP: 0010:debug_print_object Call Trace: debug_object_assert_init del_timer try_to_grab_pending cancel_delayed_work resctrl_offline_cpu cpuhp_invoke_callback cpuhp_thread_fun smpboot_thread_fn kthread ret_from_fork

Fixes: e33026831bdb ("x86/intel_rdt/mbm: Handle counter overflow") Signed-off-by: Qian Cai cai@lca.pw Signed-off-by: Borislav Petkov bp@suse.de Acked-by: Reinette Chatre reinette.chatre@intel.com Cc: Fenghua Yu fenghua.yu@intel.com Cc: "H. Peter Anvin" hpa@zytor.com Cc: Ingo Molnar mingo@redhat.com Cc: john.stultz@linaro.org Cc: sboyd@kernel.org Cc: stable@vger.kernel.org Cc: Thomas Gleixner tglx@linutronix.de Cc: tj@kernel.org Cc: Tony Luck tony.luck@intel.com Cc: Vikas Shivappa vikas.shivappa@linux.intel.com Cc: x86-ml x86@kernel.org Link: https://lkml.kernel.org/r/20191211033042.2188-1-cai@lca.pw Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/kernel/cpu/intel_rdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kernel/cpu/intel_rdt.c +++ b/arch/x86/kernel/cpu/intel_rdt.c @@ -526,7 +526,7 @@ static void domain_remove_cpu(int cpu, s if (static_branch_unlikely(&rdt_mon_enable_key)) rmdir_mondata_subdir_allrdtgrp(r, d->id); list_del(&d->list); - if (is_mbm_enabled()) + if (r->mon_capable && is_mbm_enabled()) cancel_delayed_work(&d->mbm_over); if (is_llc_occupancy_enabled() && has_busy_rmid(r, d)) { /*

From: Yuya Fujita fujita.yuya@fujitsu.com

commit 55347ec340af401437680fd0e88df6739a967f9f upstream.

Variable names are inconsistent in hists__for_each macro().

Due to this inconsistency, the macro replaces its second argument with "fmt" regardless of its original name.

So far it works because only "fmt" is passed to the second argument. However, this behavior is not expected and should be fixed.

Fixes: f0786af536bb ("perf hists: Introduce hists__for_each_format macro") Fixes: aa6f50af822a ("perf hists: Introduce hists__for_each_sort_list macro") Signed-off-by: Yuya Fujita fujita.yuya@fujitsu.com Acked-by: Jiri Olsa jolsa@kernel.org Cc: Peter Zijlstra peterz@infradead.org Link: http://lore.kernel.org/lkml/OSAPR01MB1588E1C47AC22043175DE1B2E8520@OSAPR01MB... Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- tools/perf/util/hist.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/tools/perf/util/hist.h +++ b/tools/perf/util/hist.h @@ -317,10 +317,10 @@ static inline void perf_hpp__prepend_sor list_for_each_entry_safe(format, tmp, &(_list)->sorts, sort_list)

#define hists__for_each_format(hists, format) \ - perf_hpp_list__for_each_format((hists)->hpp_list, fmt) + perf_hpp_list__for_each_format((hists)->hpp_list, format)

#define hists__for_each_sort_list(hists, format) \ - perf_hpp_list__for_each_sort_list((hists)->hpp_list, fmt) + perf_hpp_list__for_each_sort_list((hists)->hpp_list, format)

extern struct perf_hpp_fmt perf_hpp__format[];

From: Kirill A. Shutemov kirill@shutemov.name

commit 991589974d9c9ecb24ee3799ec8c415c730598a2 upstream.

Shmem/tmpfs tries to provide THP-friendly mappings if huge pages are enabled. But it doesn't work well with above-47bit hint address.

Normally, the kernel doesn't create userspace mappings above 47-bit, even if the machine allows this (such as with 5-level paging on x86-64). Not all user space is ready to handle wide addresses. It's known that at least some JIT compilers use higher bits in pointers to encode their information.

Userspace can ask for allocation from full address space by specifying hint address (with or without MAP_FIXED) above 47-bits. If the application doesn't need a particular address, but wants to allocate from whole address space it can specify -1 as a hint address.

Unfortunately, this trick breaks THP alignment in shmem/tmp: shmem_get_unmapped_area() would not try to allocate PMD-aligned area if *any* hint address specified.

This can be fixed by requesting the aligned area if the we failed to allocated at user-specified hint address. The request with inflated length will also take the user-specified hint address. This way we will not lose an allocation request from the full address space.

[kirill@shutemov.name: fold in a fixup] Link: http://lkml.kernel.org/r/20191223231309.t6bh5hkbmokihpfu@box Link: http://lkml.kernel.org/r/20191220142548.7118-3-kirill.shutemov@linux.intel.c... Fixes: b569bab78d8d ("x86/mm: Prepare to expose larger address space to userspace") Signed-off-by: Kirill A. Shutemov kirill.shutemov@linux.intel.com Cc: "Willhalm, Thomas" thomas.willhalm@intel.com Cc: Dan Williams dan.j.williams@intel.com Cc: "Bruggeman, Otto G" otto.g.bruggeman@intel.com Cc: "Aneesh Kumar K . V" aneesh.kumar@linux.vnet.ibm.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- mm/shmem.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/mm/shmem.c +++ b/mm/shmem.c @@ -2052,9 +2052,10 @@ unsigned long shmem_get_unmapped_area(st /* * Our priority is to support MAP_SHARED mapped hugely; * and support MAP_PRIVATE mapped hugely too, until it is COWed. - * But if caller specified an address hint, respect that as before. + * But if caller specified an address hint and we allocated area there + * successfully, respect that as before. */ - if (uaddr) + if (uaddr == addr) return addr;

if (shmem_huge != SHMEM_HUGE_FORCE) { @@ -2088,7 +2089,7 @@ unsigned long shmem_get_unmapped_area(st if (inflated_len < len) return addr;

- inflated_addr = get_area(NULL, 0, inflated_len, 0, flags); + inflated_addr = get_area(NULL, uaddr, inflated_len, 0, flags); if (IS_ERR_VALUE(inflated_addr)) return addr; if (inflated_addr & ~PAGE_MASK)

From: Wen Yang wenyang@linux.alibaba.com

commit 6d9e8c651dd979aa666bee15f086745f3ea9c4b3 upstream.

Patch series "use div64_ul() instead of div_u64() if the divisor is unsigned long".

We were first inspired by commit b0ab99e7736a ("sched: Fix possible divide by zero in avg_atom () calculation"), then refer to the recently analyzed mm code, we found this suspicious place.

201 if (min) { 202 min *= this_bw; 203 do_div(min, tot_bw); 204 }

And we also disassembled and confirmed it:

/usr/src/debug/kernel-4.9.168-016.ali3000/linux-4.9.168-016.ali3000.alios7.x86_64/mm/page-writeback.c: 201 0xffffffff811c37da <__wb_calc_thresh+234>: xor %r10d,%r10d 0xffffffff811c37dd <__wb_calc_thresh+237>: test %rax,%rax 0xffffffff811c37e0 <__wb_calc_thresh+240>: je 0xffffffff811c3800 <__wb_calc_thresh+272> /usr/src/debug/kernel-4.9.168-016.ali3000/linux-4.9.168-016.ali3000.alios7.x86_64/mm/page-writeback.c: 202 0xffffffff811c37e2 <__wb_calc_thresh+242>: imul %r8,%rax /usr/src/debug/kernel-4.9.168-016.ali3000/linux-4.9.168-016.ali3000.alios7.x86_64/mm/page-writeback.c: 203 0xffffffff811c37e6 <__wb_calc_thresh+246>: mov %r9d,%r10d ---> truncates it to 32 bits here 0xffffffff811c37e9 <__wb_calc_thresh+249>: xor %edx,%edx 0xffffffff811c37eb <__wb_calc_thresh+251>: div %r10 0xffffffff811c37ee <__wb_calc_thresh+254>: imul %rbx,%rax 0xffffffff811c37f2 <__wb_calc_thresh+258>: shr $0x2,%rax 0xffffffff811c37f6 <__wb_calc_thresh+262>: mul %rcx 0xffffffff811c37f9 <__wb_calc_thresh+265>: shr $0x2,%rdx 0xffffffff811c37fd <__wb_calc_thresh+269>: mov %rdx,%r10

This series uses div64_ul() instead of div_u64() if the divisor is unsigned long, to avoid truncation to 32-bit on 64-bit platforms.

This patch (of 3):

The variables 'min' and 'max' are unsigned long and do_div truncates them to 32 bits, which means it can test non-zero and be truncated to zero for division. Fix this issue by using div64_ul() instead.

Link: http://lkml.kernel.org/r/20200102081442.8273-2-wenyang@linux.alibaba.com Fixes: 693108a8a667 ("writeback: make bdi->min/max_ratio handling cgroup writeback aware") Signed-off-by: Wen Yang wenyang@linux.alibaba.com Reviewed-by: Andrew Morton akpm@linux-foundation.org Cc: Qian Cai cai@lca.pw Cc: Tejun Heo tj@kernel.org Cc: Jens Axboe axboe@kernel.dk Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- mm/page-writeback.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -201,11 +201,11 @@ static void wb_min_max_ratio(struct bdi_ if (this_bw < tot_bw) { if (min) { min *= this_bw; - do_div(min, tot_bw); + min = div64_ul(min, tot_bw); } if (max < 100) { max *= this_bw; - do_div(max, tot_bw); + max = div64_ul(max, tot_bw); } }

From: Jose Abreu Jose.Abreu@synopsys.com

commit b2f3a481c4cd62f78391b836b64c0a6e72b503d2 upstream.

XGMAC supports maximum MTU that can go to 16KB. Lets add this check in the calculation of RX buffer size.

Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu Jose.Abreu@synopsys.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1043,7 +1043,9 @@ static int stmmac_set_bfsize(int mtu, in { int ret = bufsize;

- if (mtu >= BUF_SIZE_4KiB) + if (mtu >= BUF_SIZE_8KiB) + ret = BUF_SIZE_16KiB; + else if (mtu >= BUF_SIZE_4KiB) ret = BUF_SIZE_8KiB; else if (mtu >= BUF_SIZE_2KiB) ret = BUF_SIZE_4KiB;

From: Johan Hovold johan@kernel.org

[ Upstream commit e37d1aeda737a20b1846a91a3da3f8b0f00cf690 ]

Check for NULL port data in the shared interrupt and bulk completion callbacks to avoid dereferencing a NULL pointer in case a device sends data for a port device which isn't bound to a driver (e.g. due to a malicious device having unexpected endpoints or after an allocation failure on port probe).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/serial/io_edgeport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 8810de817095..3705b64ab948 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -720,7 +720,7 @@ static void edge_interrupt_callback(struct urb *urb) if (txCredits) { port = edge_serial->serial->port[portNumber]; edge_port = usb_get_serial_port_data(port); - if (edge_port->open) { + if (edge_port && edge_port->open) { spin_lock_irqsave(&edge_port->ep_lock, flags); edge_port->txCredits += txCredits; @@ -1847,7 +1847,7 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, if (rxLen && edge_serial->rxPort < serial->num_ports) { port = serial->port[edge_serial->rxPort]; edge_port = usb_get_serial_port_data(port); - if (edge_port->open) { + if (edge_port && edge_port->open) { dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n", __func__, rxLen, edge_serial->rxPort);

From: Kirill A. Shutemov kirill@shutemov.name

[ Upstream commit 97d3d0f9a1cf132c63c0b8b8bd497b8a56283dd9 ]

Patch series "Fix two above-47bit hint address vs. THP bugs".

The two get_unmapped_area() implementations have to be fixed to provide THP-friendly mappings if above-47bit hint address is specified.

This patch (of 2):

Filesystems use thp_get_unmapped_area() to provide THP-friendly mappings. For DAX in particular.

Normally, the kernel doesn't create userspace mappings above 47-bit, even if the machine allows this (such as with 5-level paging on x86-64). Not all user space is ready to handle wide addresses. It's known that at least some JIT compilers use higher bits in pointers to encode their information.

Userspace can ask for allocation from full address space by specifying hint address (with or without MAP_FIXED) above 47-bits. If the application doesn't need a particular address, but wants to allocate from whole address space it can specify -1 as a hint address.

Unfortunately, this trick breaks thp_get_unmapped_area(): the function would not try to allocate PMD-aligned area if *any* hint address specified.

Modify the routine to handle it correctly:

- Try to allocate the space at the specified hint address with length padding required for PMD alignment. - If failed, retry without length padding (but with the same hint address); - If the returned address matches the hint address return it. - Otherwise, align the address as required for THP and return.

The user specified hint address is passed down to get_unmapped_area() so above-47bit hint address will be taken into account without breaking alignment requirements.

Link: http://lkml.kernel.org/r/20191220142548.7118-2-kirill.shutemov@linux.intel.c... Fixes: b569bab78d8d ("x86/mm: Prepare to expose larger address space to userspace") Signed-off-by: Kirill A. Shutemov kirill.shutemov@linux.intel.com Reported-by: Thomas Willhalm thomas.willhalm@intel.com Tested-by: Dan Williams dan.j.williams@intel.com Cc: "Aneesh Kumar K . V" aneesh.kumar@linux.vnet.ibm.com Cc: "Bruggeman, Otto G" otto.g.bruggeman@intel.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- mm/huge_memory.c | 38 ++++++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 14 deletions(-)

diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 6d835535946d..92915cc87549 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -502,13 +502,13 @@ void prep_transhuge_page(struct page *page) set_compound_page_dtor(page, TRANSHUGE_PAGE_DTOR); }

-static unsigned long __thp_get_unmapped_area(struct file *filp, unsigned long len, +static unsigned long __thp_get_unmapped_area(struct file *filp, + unsigned long addr, unsigned long len, loff_t off, unsigned long flags, unsigned long size) { - unsigned long addr; loff_t off_end = off + len; loff_t off_align = round_up(off, size); - unsigned long len_pad; + unsigned long len_pad, ret;

if (off_end <= off_align || (off_end - off_align) < size) return 0; @@ -517,30 +517,40 @@ static unsigned long __thp_get_unmapped_area(struct file *filp, unsigned long le if (len_pad < len || (off + len_pad) < off) return 0;

- addr = current->mm->get_unmapped_area(filp, 0, len_pad, + ret = current->mm->get_unmapped_area(filp, addr, len_pad, off >> PAGE_SHIFT, flags); - if (IS_ERR_VALUE(addr)) + + /* + * The failure might be due to length padding. The caller will retry + * without the padding. + */ + if (IS_ERR_VALUE(ret)) return 0;

- addr += (off - addr) & (size - 1); - return addr; + /* + * Do not try to align to THP boundary if allocation at the address + * hint succeeds. + */ + if (ret == addr) + return addr; + + ret += (off - ret) & (size - 1); + return ret; }

unsigned long thp_get_unmapped_area(struct file *filp, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) { + unsigned long ret; loff_t off = (loff_t)pgoff << PAGE_SHIFT;

- if (addr) - goto out; if (!IS_DAX(filp->f_mapping->host) || !IS_ENABLED(CONFIG_FS_DAX_PMD)) goto out;

- addr = __thp_get_unmapped_area(filp, len, off, flags, PMD_SIZE); - if (addr) - return addr; - - out: + ret = __thp_get_unmapped_area(filp, addr, len, off, flags, PMD_SIZE); + if (ret) + return ret; +out: return current->mm->get_unmapped_area(filp, addr, len, pgoff, flags); } EXPORT_SYMBOL_GPL(thp_get_unmapped_area);

From: Felix Fietkau nbd@nbd.name

commit 81c044fc3bdc5b7be967cd3682528ea94b58c06a upstream.

The fragments attached to a skb can be part of a compound page. In that case, page_ref_inc will increment the refcount for the wrong page. Fix this by using get_page instead, which calls page_ref_inc on the compound head and also checks for overflow.

Fixes: 2b67f944f88c ("cfg80211: reuse existing page fragments in A-MSDU rx") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau nbd@nbd.name Link: https://lore.kernel.org/r/20200113182107.20461-1-nbd@nbd.name Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/wireless/util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -652,7 +652,7 @@ __frame_add_frag(struct sk_buff *skb, st struct skb_shared_info *sh = skb_shinfo(skb); int page_offset;

- page_ref_inc(page); + get_page(page); page_offset = ptr - page_address(page); skb_add_rx_frag(skb, sh->nr_frags, page, page_offset, len, size); }

From: Florian Westphal fw@strlen.de

commit 212e7f56605ef9688d0846db60c6c6ec06544095 upstream.

An earlier commit (1b789577f655060d98d20e, "netfilter: arp_tables: init netns pointer in xt_tgchk_param struct") fixed missing net initialization for arptables, but turns out it was incomplete. We can get a very similar struct net NULL deref during error unwinding:

general protection fault: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:xt_rateest_put+0xa1/0x440 net/netfilter/xt_RATEEST.c:77 xt_rateest_tg_destroy+0x72/0xa0 net/netfilter/xt_RATEEST.c:175 cleanup_entry net/ipv4/netfilter/arp_tables.c:509 [inline] translate_table+0x11f4/0x1d80 net/ipv4/netfilter/arp_tables.c:587 do_replace net/ipv4/netfilter/arp_tables.c:981 [inline] do_arpt_set_ctl+0x317/0x650 net/ipv4/netfilter/arp_tables.c:1461

Also init the netns pointer in xt_tgdtor_param struct.

Fixes: add67461240c1d ("netfilter: add struct net * to target parameters") Reported-by: syzbot+91bdd8eece0f6629ec8b@syzkaller.appspotmail.com Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/ipv4/netfilter/arp_tables.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)

--- a/net/ipv4/netfilter/arp_tables.c +++ b/net/ipv4/netfilter/arp_tables.c @@ -506,12 +506,13 @@ static inline int check_entry_size_and_h return 0; }

-static inline void cleanup_entry(struct arpt_entry *e) +static void cleanup_entry(struct arpt_entry *e, struct net *net) { struct xt_tgdtor_param par; struct xt_entry_target *t;

t = arpt_get_target(e); + par.net = net; par.target = t->u.kernel.target; par.targinfo = t->data; par.family = NFPROTO_ARP; @@ -601,7 +602,7 @@ static int translate_table(struct net *n xt_entry_foreach(iter, entry0, newinfo->size) { if (i-- == 0) break; - cleanup_entry(iter); + cleanup_entry(iter, net); } return ret; } @@ -926,7 +927,7 @@ static int __do_replace(struct net *net, /* Decrease module usage counts and free resource */ loc_cpu_old_entry = oldinfo->entries; xt_entry_foreach(iter, loc_cpu_old_entry, oldinfo->size) - cleanup_entry(iter); + cleanup_entry(iter, net);

xt_free_table_info(oldinfo); if (copy_to_user(counters_ptr, counters, @@ -990,7 +991,7 @@ static int do_replace(struct net *net, c

free_newinfo_untrans: xt_entry_foreach(iter, loc_cpu_entry, newinfo->size) - cleanup_entry(iter); + cleanup_entry(iter, net); free_newinfo: xt_free_table_info(newinfo); return ret; @@ -1287,7 +1288,7 @@ static int compat_do_replace(struct net

free_newinfo_untrans: xt_entry_foreach(iter, loc_cpu_entry, newinfo->size) - cleanup_entry(iter); + cleanup_entry(iter, net); free_newinfo: xt_free_table_info(newinfo); return ret; @@ -1514,7 +1515,7 @@ static int do_arpt_get_ctl(struct sock * return ret; }

-static void __arpt_unregister_table(struct xt_table *table) +static void __arpt_unregister_table(struct net *net, struct xt_table *table) { struct xt_table_info *private; void *loc_cpu_entry; @@ -1526,7 +1527,7 @@ static void __arpt_unregister_table(stru /* Decrease module usage counts and free resources */ loc_cpu_entry = private->entries; xt_entry_foreach(iter, loc_cpu_entry, private->size) - cleanup_entry(iter); + cleanup_entry(iter, net); if (private->number > private->initial_entries) module_put(table_owner); xt_free_table_info(private); @@ -1566,7 +1567,7 @@ int arpt_register_table(struct net *net,

ret = nf_register_net_hooks(net, ops, hweight32(table->valid_hooks)); if (ret != 0) { - __arpt_unregister_table(new_table); + __arpt_unregister_table(net, new_table); *res = NULL; }

@@ -1581,7 +1582,7 @@ void arpt_unregister_table(struct net *n const struct nf_hook_ops *ops) { nf_unregister_net_hooks(net, ops, hweight32(table->valid_hooks)); - __arpt_unregister_table(table); + __arpt_unregister_table(net, table); }

/* The built-in targets: standard (NULL) and error. */

From: Sven Eckelmann sven@narfation.org

commit 4cc4a1708903f404d2ca0dfde30e71e052c6cbc9 upstream.

The distributed arp table is using a DHT to store and retrieve MAC address information for an IP address. This is done using unicast messages to selected peers. The potential peers are looked up using the IP address and the VID.

While the IP address is always stored in big endian byte order, this is not the case of the VID. It can (depending on the host system) either be big endian or little endian. The host must therefore always convert it to big endian to ensure that all devices calculate the same peers for the same lookup data.

Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/batman-adv/distributed-arp-table.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/batman-adv/distributed-arp-table.c +++ b/net/batman-adv/distributed-arp-table.c @@ -243,6 +243,7 @@ static u32 batadv_hash_dat(const void *d u32 hash = 0; const struct batadv_dat_entry *dat = data; const unsigned char *key; + __be16 vid; u32 i;

key = (const unsigned char *)&dat->ip; @@ -252,7 +253,8 @@ static u32 batadv_hash_dat(const void *d hash ^= (hash >> 6); }

- key = (const unsigned char *)&dat->vid; + vid = htons(dat->vid); + key = (__force const unsigned char *)&vid; for (i = 0; i < sizeof(dat->vid); i++) { hash += key[i]; hash += (hash << 10);

From: Mohammed Gamal mgamal@redhat.com

[ Upstream commit 536dc5df2808efbefc5acee334d3c4f701790ec0 ]

kmemleak detects the following memory leak when hot removing a network device:

unreferenced object 0xffff888083f63600 (size 256): comm "kworker/0:1", pid 12, jiffies 4294831717 (age 1113.676s) hex dump (first 32 bytes): 00 40 c7 33 80 88 ff ff 00 00 00 00 10 00 00 00 .@.3............ 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... backtrace: [<00000000d4a8f5be>] rndis_filter_device_add+0x117/0x11c0 [hv_netvsc] [<000000009c02d75b>] netvsc_probe+0x5e7/0xbf0 [hv_netvsc] [<00000000ddafce23>] vmbus_probe+0x74/0x170 [hv_vmbus] [<00000000046e64f1>] really_probe+0x22f/0xb50 [<000000005cc35eb7>] driver_probe_device+0x25e/0x370 [<0000000043c642b2>] bus_for_each_drv+0x11f/0x1b0 [<000000005e3d09f0>] __device_attach+0x1c6/0x2f0 [<00000000a72c362f>] bus_probe_device+0x1a6/0x260 [<0000000008478399>] device_add+0x10a3/0x18e0 [<00000000cf07b48c>] vmbus_device_register+0xe7/0x1e0 [hv_vmbus] [<00000000d46cf032>] vmbus_add_channel_work+0x8ab/0x1770 [hv_vmbus] [<000000002c94bb64>] process_one_work+0x919/0x17d0 [<0000000096de6781>] worker_thread+0x87/0xb40 [<00000000fbe7397e>] kthread+0x333/0x3f0 [<000000004f844269>] ret_from_fork+0x3a/0x50

rndis_filter_device_add() allocates an instance of struct rndis_device which never gets deallocated as rndis_filter_device_remove() sets net_device->extension which points to the rndis_device struct to NULL, leaving the rndis_device dangling.

Since net_device->extension is eventually freed in free_netvsc_device(), we refrain from setting it to NULL inside rndis_filter_device_remove()

Signed-off-by: Mohammed Gamal mgamal@redhat.com Reviewed-by: Haiyang Zhang haiyangz@microsoft.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/hyperv/rndis_filter.c | 2 -- 1 file changed, 2 deletions(-)

--- a/drivers/net/hyperv/rndis_filter.c +++ b/drivers/net/hyperv/rndis_filter.c @@ -1331,8 +1331,6 @@ void rndis_filter_device_remove(struct h /* Halt and release the rndis device */ rndis_filter_halt_device(rndis_dev);

- net_dev->extension = NULL; - netvsc_device_remove(dev); }

From: Yonglong Liu liuyonglong@huawei.com

[ Upstream commit 49edd6a2c456150870ddcef5b7ed11b21d849e13 ]

When there is not enough memory and napi_alloc_skb() return NULL, the HNS driver will print error message, and than try again, if the memory is not enough for a while, huge error message and the retry operation will cause soft lockup.

When napi_alloc_skb() return NULL because of no memory, we can get a warn_alloc() call trace, so this patch deletes the error message. We already use polling mode to handle irq, but the retry operation will render the polling weight inactive, this patch just return budget when the rx is not completed to avoid dead loop.

Fixes: 36eedfde1a36 ("net: hns: Optimize hns_nic_common_poll for better performance") Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support") Signed-off-by: Yonglong Liu liuyonglong@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c @@ -669,7 +669,6 @@ static int hns_nic_poll_rx_skb(struct hn skb = *out_skb = napi_alloc_skb(&ring_data->napi, HNS_RX_HEAD_SIZE); if (unlikely(!skb)) { - netdev_err(ndev, "alloc rx skb fail\n"); ring->stats.sw_err_cnt++; return -ENOMEM; } @@ -1180,7 +1179,6 @@ static int hns_nic_common_poll(struct na container_of(napi, struct hns_nic_ring_data, napi); struct hnae_ring *ring = ring_data->ring;

-try_again: clean_complete += ring_data->poll_one( ring_data, budget - clean_complete, ring_data->ex_process); @@ -1190,7 +1188,7 @@ try_again: napi_complete(napi); ring->q->handle->dev->ops->toggle_ring_irq(ring, 0); } else { - goto try_again; + return budget; } }

From: Colin Ian King colin.king@canonical.com

[ Upstream commit ddf420390526ede3b9ff559ac89f58cb59d9db2f ]

Array utdm_info is declared as an array of MAX_HDLC_NUM (4) elements however up to UCC_MAX_NUM (8) elements are potentially being written to it. Currently we have an array out-of-bounds write error on the last 4 elements. Fix this by making utdm_info UCC_MAX_NUM elements in size.

Addresses-Coverity: ("Out-of-bounds write") Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC") Signed-off-by: Colin Ian King colin.king@canonical.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wan/fsl_ucc_hdlc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wan/fsl_ucc_hdlc.c +++ b/drivers/net/wan/fsl_ucc_hdlc.c @@ -76,7 +76,7 @@ static struct ucc_tdm_info utdm_primary_ }, };

-static struct ucc_tdm_info utdm_info[MAX_HDLC_NUM]; +static struct ucc_tdm_info utdm_info[UCC_MAX_NUM];

static int uhdlc_init(struct ucc_hdlc_private *priv) {

From: Johan Hovold johan@kernel.org

[ Upstream commit 86f3f4cd53707ceeec079b83205c8d3c756eca93 ]

Add missing endpoint sanity check to probe in order to prevent a NULL-pointer dereference (or slab out-of-bounds access) when retrieving the interrupt-endpoint bInterval on ndo_open() in case a device lacks the expected endpoints.

Fixes: 40a82917b1d3 ("net/usb/r8152: enable interrupt transfer") Cc: hayeswang hayeswang@realtek.com Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/usb/r8152.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -5158,6 +5158,9 @@ static int rtl8152_probe(struct usb_inte return -ENODEV; }

+ if (intf->cur_altsetting->desc.bNumEndpoints < 3) + return -ENODEV; + usb_reset_device(udev); netdev = alloc_etherdev(sizeof(struct r8152)); if (!netdev) {

From: Nathan Chancellor natechancellor@gmail.com

commit 589b72894f53124a39d1bb3c0cecaf9dcabac417 upstream.

Clang warns:

../drivers/block/xen-blkfront.c:1117:4: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] nr_parts = PARTS_PER_DISK; ^ ../drivers/block/xen-blkfront.c:1115:3: note: previous statement is here if (err) ^

This is because there is a space at the beginning of this line; remove it so that the indentation is consistent according to the Linux kernel coding style and clang no longer warns.

While we are here, the previous line has some trailing whitespace; clean that up as well.

Fixes: c80a420995e7 ("xen-blkfront: handle Xen major numbers other than XENVBD") Link: https://github.com/ClangBuiltLinux/linux/issues/791 Signed-off-by: Nathan Chancellor natechancellor@gmail.com Reviewed-by: Juergen Gross jgross@suse.com Acked-by: Roger Pau Monné roger.pau@citrix.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/block/xen-blkfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -1115,8 +1115,8 @@ static int xlvbd_alloc_gendisk(blkif_sec if (!VDEV_IS_EXTENDED(info->vdevice)) { err = xen_translate_vdev(info->vdevice, &minor, &offset); if (err) - return err; - nr_parts = PARTS_PER_DISK; + return err; + nr_parts = PARTS_PER_DISK; } else { minor = BLKIF_MINOR_EXT(info->vdevice); nr_parts = PARTS_PER_EXT_DISK;

From: Christian Hewitt christianshewitt@gmail.com

commit d5f6fa904ecbadbb8e9fa6302b0fc165bec0559a upstream.

Fix DTC warnings:

arch/arm/dts/meson-gxl-s905x-khadas-vim.dtb: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property

Fixes: e15d2774b8c0 ("ARM64: dts: meson-gxl: add support for the Khadas VIM board") Signed-off-by: Christian Hewitt christianshewitt@gmail.com Reviewed-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -33,11 +33,9 @@

gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>;

- button@0 { + power-button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;

From: Eric Dumazet edumazet@google.com

commit de95a991bb72e009f47e0c4bbc90fc5f594588d5 upstream.

syzbot (KCSAN) reported a data-race in tick_do_update_jiffies64():

BUG: KCSAN: data-race in tick_do_update_jiffies64 / tick_do_update_jiffies64

write to 0xffffffff8603d008 of 8 bytes by interrupt on cpu 1: tick_do_update_jiffies64+0x100/0x250 kernel/time/tick-sched.c:73 tick_sched_do_timer+0xd4/0xe0 kernel/time/tick-sched.c:138 tick_sched_timer+0x43/0xe0 kernel/time/tick-sched.c:1292 __run_hrtimer kernel/time/hrtimer.c:1514 [inline] __hrtimer_run_queues+0x274/0x5f0 kernel/time/hrtimer.c:1576 hrtimer_interrupt+0x22a/0x480 kernel/time/hrtimer.c:1638 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1110 [inline] smp_apic_timer_interrupt+0xdc/0x280 arch/x86/kernel/apic/apic.c:1135 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 arch_local_irq_restore arch/x86/include/asm/paravirt.h:756 [inline] kcsan_setup_watchpoint+0x1d4/0x460 kernel/kcsan/core.c:436 check_access kernel/kcsan/core.c:466 [inline] __tsan_read1 kernel/kcsan/core.c:593 [inline] __tsan_read1+0xc2/0x100 kernel/kcsan/core.c:593 kallsyms_expand_symbol.constprop.0+0x70/0x160 kernel/kallsyms.c:79 kallsyms_lookup_name+0x7f/0x120 kernel/kallsyms.c:170 insert_report_filterlist kernel/kcsan/debugfs.c:155 [inline] debugfs_write+0x14b/0x2d0 kernel/kcsan/debugfs.c:256 full_proxy_write+0xbd/0x100 fs/debugfs/file.c:225 __vfs_write+0x67/0xc0 fs/read_write.c:494 vfs_write fs/read_write.c:558 [inline] vfs_write+0x18a/0x390 fs/read_write.c:542 ksys_write+0xd5/0x1b0 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x4c/0x60 fs/read_write.c:620 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9

read to 0xffffffff8603d008 of 8 bytes by task 0 on cpu 0: tick_do_update_jiffies64+0x2b/0x250 kernel/time/tick-sched.c:62 tick_nohz_update_jiffies kernel/time/tick-sched.c:505 [inline] tick_nohz_irq_enter kernel/time/tick-sched.c:1257 [inline] tick_irq_enter+0x139/0x1c0 kernel/time/tick-sched.c:1274 irq_enter+0x4f/0x60 kernel/softirq.c:354 entering_irq arch/x86/include/asm/apic.h:517 [inline] entering_ack_irq arch/x86/include/asm/apic.h:523 [inline] smp_apic_timer_interrupt+0x55/0x280 arch/x86/kernel/apic/apic.c:1133 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:60 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:571 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x1af/0x280 kernel/sched/idle.c:263 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355 rest_init+0xec/0xf6 init/main.c:452 arch_call_rest_init+0x17/0x37 start_kernel+0x838/0x85e init/main.c:786 x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490 x86_64_start_kernel+0x72/0x76 arch/x86/kernel/head64.c:471 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241

Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Use READ_ONCE() and WRITE_ONCE() to annotate this expected race.

Reported-by: syzbot syzkaller@googlegroups.com Signed-off-by: Eric Dumazet edumazet@google.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Link: https://lore.kernel.org/r/20191205045619.204946-1-edumazet@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- kernel/time/tick-sched.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -60,8 +60,9 @@ static void tick_do_update_jiffies64(kti

/* * Do a quick check without holding jiffies_lock: + * The READ_ONCE() pairs with two updates done later in this function. */ - delta = ktime_sub(now, last_jiffies_update); + delta = ktime_sub(now, READ_ONCE(last_jiffies_update)); if (delta < tick_period) return;

@@ -72,8 +73,9 @@ static void tick_do_update_jiffies64(kti if (delta >= tick_period) {

delta = ktime_sub(delta, tick_period); - last_jiffies_update = ktime_add(last_jiffies_update, - tick_period); + /* Pairs with the lockless read in this function. */ + WRITE_ONCE(last_jiffies_update, + ktime_add(last_jiffies_update, tick_period));

/* Slow path for long timeouts */ if (unlikely(delta >= tick_period)) { @@ -81,8 +83,10 @@ static void tick_do_update_jiffies64(kti

ticks = ktime_divns(delta, incr);

- last_jiffies_update = ktime_add_ns(last_jiffies_update, - incr * ticks); + /* Pairs with the lockless read in this function. */ + WRITE_ONCE(last_jiffies_update, + ktime_add_ns(last_jiffies_update, + incr * ticks)); } do_timer(++ticks);

From: Jeff Mahoney jeffm@suse.com

commit 394440d469413fa9b74f88a11f144d76017221f2 upstream.

Commit 60e4cf67a58 (reiserfs: fix extended attributes on the root directory) introduced a regression open_xa_root started returning -EOPNOTSUPP but it was not handled properly in reiserfs_for_each_xattr.

When the reiserfs module is built without CONFIG_REISERFS_FS_XATTR, deleting an inode would result in a warning and chowning an inode would also result in a warning and then fail to complete.

With CONFIG_REISERFS_FS_XATTR enabled, the xattr root would always be present for read-write operations.

This commit handles -EOPNOSUPP in the same way -ENODATA is handled.

Fixes: 60e4cf67a582 ("reiserfs: fix extended attributes on the root directory") CC: stable@vger.kernel.org # Commit 60e4cf67a58 was picked up by stable Link: https://lore.kernel.org/r/20200115180059.6935-1-jeffm@suse.com Reported-by: Michael Brunnbauer brunni@netestate.de Signed-off-by: Jeff Mahoney jeffm@suse.com Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/reiserfs/xattr.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -319,8 +319,12 @@ static int reiserfs_for_each_xattr(struc out_dir: dput(dir); out: - /* -ENODATA isn't an error */ - if (err == -ENODATA) + /* + * -ENODATA: this object doesn't have any xattrs + * -EOPNOTSUPP: this file system doesn't have xattrs enabled on disk. + * Neither are errors + */ + if (err == -ENODATA || err == -EOPNOTSUPP) err = 0; return err; }

From: Pan Bian bianpan2016@163.com

commit 3fe3d2428b62822b7b030577cd612790bdd8c941 upstream.

The variable init_fw_cb is released twice, resulting in a double free bug. The call to the function dma_free_coherent() before goto is removed to get rid of potential double free.

Fixes: 2a49a78ed3c8 ("[SCSI] qla4xxx: added IPv6 support.") Link: https://lore.kernel.org/r/1572945927-27796-1-git-send-email-bianpan2016@163.... Signed-off-by: Pan Bian bianpan2016@163.com Acked-by: Manish Rangankar mrangankar@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/scsi/qla4xxx/ql4_mbx.c | 3 --- 1 file changed, 3 deletions(-)

--- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -641,9 +641,6 @@ int qla4xxx_initialize_fw_cb(struct scsi

if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) != QLA_SUCCESS) { - dma_free_coherent(&ha->pdev->dev, - sizeof(struct addr_ctrl_blk), - init_fw_cb, init_fw_cb_dma); goto exit_init_fw_cb; }

From: Bart Van Assche bvanassche@acm.org

commit c941e0d172605731de9b4628bd4146d35cf2e7d6 upstream.

Print the string for which conversion failed instead of printing the function name twice.

Fixes: 2650d71e244f ("target: move transport ID handling to the core") Cc: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/20191107215525.64415-1-bvanassche@acm.org Signed-off-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/target/target_core_fabric_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/target/target_core_fabric_lib.c +++ b/drivers/target/target_core_fabric_lib.c @@ -131,7 +131,7 @@ static int srp_get_pr_transport_id( memset(buf + 8, 0, leading_zero_bytes); rc = hex2bin(buf + 8 + leading_zero_bytes, p, count); if (rc < 0) { - pr_debug("hex2bin failed for %s: %d\n", __func__, rc); + pr_debug("hex2bin failed for %s: %d\n", p, rc); return rc; }

From: Martin Wilck mwilck@suse.com

commit d341e9a8f2cffe4000c610225c629f62c7489c74 upstream.

In qla2x00_find_all_fabric_devs(), fcport->flags & FCF_LOGIN_NEEDED is a necessary condition for logging into new rports, but not for dropping lost ones.

Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Link: https://lore.kernel.org/r/20191122221912.20100-2-martin.wilck@suse.com Tested-by: David Bond dbond@suse.com Signed-off-by: Martin Wilck mwilck@suse.com Acked-by: Himanshu Madhani hmadhani@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/scsi/qla2xxx/qla_init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -5145,8 +5145,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_ho if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) break;

- if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 || - (fcport->flags & FCF_LOGIN_NEEDED) == 0) + if ((fcport->flags & FCF_FABRIC_DEVICE) == 0) continue;

if (fcport->scan_state == QLA_FCPORT_SCAN) { @@ -5171,7 +5170,8 @@ qla2x00_find_all_fabric_devs(scsi_qla_ho } }

- if (fcport->scan_state == QLA_FCPORT_FOUND) + if (fcport->scan_state == QLA_FCPORT_FOUND && + (fcport->flags & FCF_LOGIN_NEEDED) != 0) qla24xx_fcport_handle_login(vha, fcport); } return (rval);

From: Masami Hiramatsu mhiramat@kernel.org

commit 07d369857808b7e8e471bbbbb0074a6718f89b31 upstream.

Since there are some DIE which has only ranges instead of the combination of entrypc/highpc, address verification must use dwarf_haspc() instead of dwarf_entrypc/dwarf_highpc.

Also, the ranges only DIE will have a partial code in different section (e.g. unlikely code will be in text.unlikely as "FUNC.cold" symbol). In that case, we can not use dwarf_entrypc() or die_entrypc(), because the offset from original DIE can be a minus value.

Instead, this simply gets the symbol and offset from symtab.

Without this patch;

# perf probe -D clear_tasks_mm_cpumask:1 Failed to get entry address of clear_tasks_mm_cpumask Error: Failed to add events.

And with this patch:

# perf probe -D clear_tasks_mm_cpumask:1 p:probe/clear_tasks_mm_cpumask clear_tasks_mm_cpumask+0 p:probe/clear_tasks_mm_cpumask_1 clear_tasks_mm_cpumask+5 p:probe/clear_tasks_mm_cpumask_2 clear_tasks_mm_cpumask+8 p:probe/clear_tasks_mm_cpumask_3 clear_tasks_mm_cpumask+16 p:probe/clear_tasks_mm_cpumask_4 clear_tasks_mm_cpumask+82

Committer testing:

I managed to reproduce the above:

[root@quaco ~]# perf probe -D clear_tasks_mm_cpumask:1 p:probe/clear_tasks_mm_cpumask _text+919968 p:probe/clear_tasks_mm_cpumask_1 _text+919973 p:probe/clear_tasks_mm_cpumask_2 _text+919976 [root@quaco ~]#

But then when trying to actually put the probe in place, it fails if I use :0 as the offset:

[root@quaco ~]# perf probe -L clear_tasks_mm_cpumask | head -5 <clear_tasks_mm_cpumask@/usr/src/debug/kernel-5.2.fc30/linux-5.2.18-200.fc30.x86_64/kernel/cpu.c:0> 0 void clear_tasks_mm_cpumask(int cpu) 1 { 2 struct task_struct *p;

[root@quaco ~]# perf probe clear_tasks_mm_cpumask:0 Probe point 'clear_tasks_mm_cpumask' not found. Error: Failed to add events. [root@quaco

The next patch is needed to fix this case.

Fixes: 576b523721b7 ("perf probe: Fix probing symbols with optimization suffix") Reported-by: Arnaldo Carvalho de Melo acme@kernel.org Tested-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Masami Hiramatsu mhiramat@kernel.org Cc: Jiri Olsa jolsa@redhat.com Cc: Namhyung Kim namhyung@kernel.org Link: http://lore.kernel.org/lkml/157199318513.8075.10463906803299647907.stgit@dev... Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- tools/perf/util/probe-finder.c | 32 ++++++++++---------------------- 1 file changed, 10 insertions(+), 22 deletions(-)

--- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -615,38 +615,26 @@ static int convert_to_trace_point(Dwarf_ const char *function, struct probe_trace_point *tp) { - Dwarf_Addr eaddr, highaddr; + Dwarf_Addr eaddr; GElf_Sym sym; const char *symbol;

/* Verify the address is correct */ - if (dwarf_entrypc(sp_die, &eaddr) != 0) { - pr_warning("Failed to get entry address of %s\n", - dwarf_diename(sp_die)); - return -ENOENT; - } - if (dwarf_highpc(sp_die, &highaddr) != 0) { - pr_warning("Failed to get end address of %s\n", - dwarf_diename(sp_die)); - return -ENOENT; - } - if (paddr > highaddr) { - pr_warning("Offset specified is greater than size of %s\n", + if (!dwarf_haspc(sp_die, paddr)) { + pr_warning("Specified offset is out of %s\n", dwarf_diename(sp_die)); return -EINVAL; }

- symbol = dwarf_diename(sp_die); + /* Try to get actual symbol name from symtab */ + symbol = dwfl_module_addrsym(mod, paddr, &sym, NULL); if (!symbol) { - /* Try to get the symbol name from symtab */ - symbol = dwfl_module_addrsym(mod, paddr, &sym, NULL); - if (!symbol) { - pr_warning("Failed to find symbol at 0x%lx\n", - (unsigned long)paddr); - return -ENOENT; - } - eaddr = sym.st_value; + pr_warning("Failed to find symbol at 0x%lx\n", + (unsigned long)paddr); + return -ENOENT; } + eaddr = sym.st_value; + tp->offset = (unsigned long)(paddr - eaddr); tp->address = (unsigned long)paddr; tp->symbol = strdup(symbol);