On 2/15/23 23:49, Mika Westerberg wrote:

Hi Mario,

On Wed, Feb 15, 2023 at 11:25:19AM -0600, Mario Limonciello wrote:

...

Some TBT3 devices have a hard time reliably responding to bit banging requests correctly when connected to AMD USB4 hosts running Linux.

These problems are not reported in any other CM supported on AMD platforms, and comparing the Windows and Pre-OS implementations the Linux CM is the only one that utilizes bit banging to access the DROM. Other CM implementations access the DROM directly from the NVM instead of bit banging.

Adjust the flow to use this method to fetch the NVM when the downstream device is Thunderbolt 3 and only use bit banging to access TBT 2 or TBT 1 devices. As the flow is modified, also remove the retry sequence that was introduced from commit f022ff7bf377 ("thunderbolt: Retry DROM read once if parsing fails") as it will not be necessary if the NVM is fetched this way.

Cc: stable@vger.kernel.org Fixes: f022ff7bf377 ("thunderbolt: Retry DROM read once if parsing fails")

I don't think it fixes a regression of above commit and I don't think this is stable material because it is quite a big change. I would rather let it sit in -rcX for a while to make sure no user visible changes are accidentally introduced. Is this OK for you?

No worry on dropping these two tags.  I'll do that for a v3. The original change in v1 was more stable material than this is now.

While adopting your feedback below I'll keep in mind patch ordering for refactoring as I do want to get the core of the solution back to stable eventually when we're collectively confident on it.

Did you check that the UUID of these (and other possible) devices stay the same before and after the patch?

Yeah I did across a few hotplug cycles and suspend cycles.

...

Signed-off-by: Mario Limonciello mario.limonciello@amd.com

v1->v2:

• Update commit message to indicate which CMs are tested
• Adjust flow to only fetch DROM from NVM on TBT3 and bit bang on TBT1/2

---

drivers/thunderbolt/eeprom.c | 145 +++++++++++++++++++---------------- 1 file changed, 80 insertions(+), 65 deletions(-)

diff --git a/drivers/thunderbolt/eeprom.c b/drivers/thunderbolt/eeprom.c index c90d22f56d4e..d1be72b6afdb 100644 --- a/drivers/thunderbolt/eeprom.c +++ b/drivers/thunderbolt/eeprom.c @@ -416,7 +416,7 @@ static int tb_drom_parse_entries(struct tb_switch *sw, size_t header_size) if (pos + 1 == drom_size || pos + entry->len > drom_size || !entry->len) { tb_sw_warn(sw, "DROM buffer overrun\n");

• 	return -EILSEQ;
  

• 	return -EIO;
  

  }

switch (entry->type) { @@ -544,7 +544,37 @@ static int tb_drom_read_n(struct tb_switch *sw, u16 offset, u8 *val, return tb_eeprom_read_n(sw, offset, val, count); } -static int tb_drom_parse(struct tb_switch *sw) +static int tb_drom_bit_bang(struct tb_switch *sw, u16 *size) +{

• int res;
• res = tb_drom_read_n(sw, 14, (u8 *) size, 2);
• if (res)

• return res;
  

• *size &= 0x3ff;
• *size += TB_DROM_DATA_START;
• tb_sw_dbg(sw, "reading drom (length: %#x)\n", *size);
• if (*size < sizeof(struct tb_drom_header)) {

• tb_sw_warn(sw, "drom too small, aborting\n");
  

• return -EIO;
  

• }
• sw->drom = kzalloc(*size, GFP_KERNEL);
• if (!sw->drom)

• return -ENOMEM;
  

• res = tb_drom_read_n(sw, 0, sw->drom, *size);
• if (res)

• goto err;
  

• return 0;

+err:

• kfree(sw->drom);
• sw->drom = NULL;
• return res;

+}

Can you split the refactoring part into a separate patch?

Sure.

...

+static int tb_drom_parse_v1(struct tb_switch *sw) { const struct tb_drom_header *header = (const struct tb_drom_header *)sw->drom; @@ -555,7 +585,7 @@ static int tb_drom_parse(struct tb_switch *sw) tb_sw_warn(sw, "DROM UID CRC8 mismatch (expected: %#x, got: %#x)\n", header->uid_crc8, crc);

• return -EILSEQ;
  

• return -EIO;
  

  } if (!sw->uid) sw->uid = header->uid;

@@ -589,6 +619,43 @@ static int usb4_drom_parse(struct tb_switch *sw) return tb_drom_parse_entries(sw, USB4_DROM_HEADER_SIZE); } +static int tb_drom_parse(struct tb_switch *sw, u16 *size) +{

• struct tb_drom_header *header = (void *) sw->drom;
• int res;
• if (header->data_len + TB_DROM_DATA_START != *size) {

• tb_sw_warn(sw, "drom size mismatch\n");
  

• goto err;
  

• }
• tb_sw_dbg(sw, "DROM version: %d\n", header->device_rom_revision);
• switch (header->device_rom_revision) {
• case 3:

• res = usb4_drom_parse(sw);
  

• break;
  

• default:

• tb_sw_warn(sw, "DROM device_rom_revision %#x unknown\n",
  

• 	   header->device_rom_revision);
  

• fallthrough;
  

• case 1:

• res = tb_drom_parse_v1(sw);
  

• break;
  

• }
• if (res) {

• tb_sw_warn(sw, "parsing DROM failed\n");
  

• goto err;
  

• }
• return 0;

+err:

• kfree(sw->drom);
• sw->drom = NULL;
• return -EIO;

+}

• /**
  • tb_drom_read() - Copy DROM to sw->drom and parse it
  • @sw: Router whose DROM to read and parse

@@ -602,8 +669,7 @@ static int usb4_drom_parse(struct tb_switch *sw) int tb_drom_read(struct tb_switch *sw) { u16 size;

• struct tb_drom_header *header;
• int res, retries = 1;

• int res;

if (sw->drom) return 0; @@ -614,11 +680,11 @@ int tb_drom_read(struct tb_switch *sw) * in a device property. Use it if available. */ if (tb_drom_copy_efi(sw, &size) == 0)

• 	goto parse;
  

• 	return tb_drom_parse(sw, &size);
  

/* Non-Apple hardware has the DROM as part of NVM */ if (tb_drom_copy_nvm(sw, &size) == 0)

• 	goto parse;
  

• 	return tb_drom_parse(sw, &size);
  

/* * USB4 hosts may support reading DROM through router @@ -627,7 +693,7 @@ int tb_drom_read(struct tb_switch *sw) if (tb_switch_is_usb4(sw)) { usb4_switch_read_uid(sw, &sw->uid); if (!usb4_copy_host_drom(sw, &size))

• 		goto parse;
  

• 		return tb_drom_parse(sw, &size);
  

  } else { /* * The root switch contains only a dummy drom

@@ -640,64 +706,13 @@ int tb_drom_read(struct tb_switch *sw) return 0; }

• res = tb_drom_read_n(sw, 14, (u8 *) &size, 2);

• /* TBT3 devices have the DROM as part of NVM */
• if (sw->generation < 3)

This is true for TBT2 devices too. I think you want to check for the sw->cap_lc here instead. If it is set the device has LC and therefore we can use the LC UUID registers to figure out the UUID in later stages. Otherwise we need to read it through bitbanging.

OK thanks, will adjust.

...

• res = tb_drom_bit_bang(sw, &size);
  

• else

• res = tb_drom_copy_nvm(sw, &size);
  

  if (res) return res;

• size &= 0x3ff;
• size += TB_DROM_DATA_START;
• tb_sw_dbg(sw, "reading drom (length: %#x)\n", size);
• if (size < sizeof(*header)) {

• tb_sw_warn(sw, "drom too small, aborting\n");
  

• return -EIO;
  

• }
• sw->drom = kzalloc(size, GFP_KERNEL);
• if (!sw->drom)

• return -ENOMEM;
  

-read:

• res = tb_drom_read_n(sw, 0, sw->drom, size);
• if (res)

• goto err;
  

-parse:

• header = (void *) sw->drom;
• if (header->data_len + TB_DROM_DATA_START != size) {

• tb_sw_warn(sw, "drom size mismatch\n");
  

• if (retries--) {
  

• 	msleep(100);
  

• 	goto read;
  

• }
  

• goto err;
  

• }

• tb_sw_dbg(sw, "DROM version: %d\n", header->device_rom_revision);
• switch (header->device_rom_revision) {
• case 3:

• res = usb4_drom_parse(sw);
  

• break;
  

• default:

• tb_sw_warn(sw, "DROM device_rom_revision %#x unknown\n",
  

• 	   header->device_rom_revision);
  

• fallthrough;
  

• case 1:

• res = tb_drom_parse(sw);
  

• break;
  

• }
• /* If the DROM parsing fails, wait a moment and retry once */
• if (res == -EILSEQ && retries--) {

• tb_sw_warn(sw, "parsing DROM failed\n");
  

• msleep(100);
  

• goto read;
  

• }
• if (!res)

• return 0;
  

-err:

• kfree(sw->drom);
• sw->drom = NULL;
• return -EIO;

• return tb_drom_parse(sw, &size); }

-- 2.34.1