This is the start of the stable review cycle for the 4.9.215 release. There are 165 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 29 Feb 2020 13:21:24 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.215-rc1... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 4.9.215-rc1
Nathan Chancellor natechancellor@gmail.com s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in storage_key_init_range
Thomas Gleixner tglx@linutronix.de xen: Enable interrupts when calling _cond_resched()
Prabhakar Kushwaha pkushwaha@marvell.com ata: ahci: Add shutdown to freeze hardware resources of ahci
Cong Wang xiyou.wangcong@gmail.com netfilter: xt_hashlimit: limit the max size of hashtable
Takashi Iwai tiwai@suse.de ALSA: seq: Fix concurrent access to queue current tick/time
Takashi Iwai tiwai@suse.de ALSA: seq: Avoid concurrent access to queue flags
Takashi Iwai tiwai@suse.de ALSA: rawmidi: Avoid bit fields for state flags
Aditya Pakki pakki001@umn.edu ecryptfs: replace BUG_ON with error handling code
Dan Carpenter dan.carpenter@oracle.com staging: greybus: use after free in gb_audio_manager_remove_all()
Jack Pham jackp@codeaurora.org usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus
Bart Van Assche bvanassche@acm.org scsi: Revert "target: iscsi: Wait for all commands to finish before freeing a session"
Bart Van Assche bvanassche@acm.org scsi: Revert "RDMA/isert: Fix a recently introduced regression related to logout"
Filipe Manana fdmanana@suse.com Btrfs: fix btrfs_wait_ordered_range() so that it waits for all ordered extents
Miaohe Lin linmiaohe@huawei.com KVM: apic: avoid calculating pending eoi from an uninitialized val
Oliver Upton oupton@google.com KVM: nVMX: Check IO instruction VM-exit conditions
Oliver Upton oupton@google.com KVM: nVMX: Refactor IO bitmap checks into helper function
Eric Biggers ebiggers@google.com ext4: fix race between writepages and enabling EXT4_EXTENTS_FL
Eric Biggers ebiggers@google.com ext4: rename s_journal_flag_rwsem to s_writepages_rwsem
Jan Kara jack@suse.cz ext4: fix mount failure with quota configured as module
Shijie Luo luoshijie1@huawei.com ext4: add cond_resched() to __ext4_find_entry()
Qian Cai cai@lca.pw ext4: fix a data race in EXT4_I(inode)->i_disksize
Jann Horn jannh@google.com netfilter: xt_bpf: add overflow checks
Paolo Bonzini pbonzini@redhat.com KVM: nVMX: Don't emulate instructions in guest mode
Alexander Potapenko glider@google.com lib/stackdepot.c: fix global out-of-bounds in stack_slabs
Miles Chen miles.chen@mediatek.com lib/stackdepot: Fix outdated comments
Gustavo Luiz Duarte gustavold@linux.ibm.com powerpc/tm: Fix clearing MSR[TS] in current when reclaiming on signal delivery
Gustavo Romero gromero@linux.vnet.ibm.com powerpc/tm: Fix endianness flip on trap
Michael Neuling mikey@neuling.org powerpc/tm: P9 disable transactionally suspended sigcontexts
Eric Dumazet edumazet@google.com vt: vt_ioctl: fix race in VT_RESIZEX
Al Viro viro@zeniv.linux.org.uk VT_RESIZEX: get rid of field-by-field copyin
Miaohe Lin linmiaohe@huawei.com KVM: x86: don't notify userspace IOAPIC on edge-triggered interrupt EOI
Mathias Nyman mathias.nyman@linux.intel.com xhci: apply XHCI_PME_STUCK_QUIRK to Intel Comet Lake platforms
Ioanna Alifieraki ioanna-maria.alifieraki@canonical.com Revert "ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()"
Fugang Duan fugang.duan@nxp.com tty: serial: imx: setup the correct sg entry for tx dma
Nicolas Ferre nicolas.ferre@microchip.com tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode
Thomas Gleixner tglx@linutronix.de x86/mce/amd: Fix kobject lifetime
Borislav Petkov bp@suse.de x86/mce/amd: Publish the bank pointer only after setup has succeeded
Larry Finger Larry.Finger@lwfinger.net staging: rtl8188eu: Fix potential overuse of kernel memory
Larry Finger Larry.Finger@lwfinger.net staging: rtl8188eu: Fix potential security hole
Alan Stern stern@rowland.harvard.edu USB: hub: Don't record a connect-change event during reset-resume
Richard Dodd richard.o.dodd@gmail.com USB: Fix novation SourceControl XL after suspend
EJ Hsu ejh@nvidia.com usb: uas: fix a plug & unplug racing
Mathias Nyman mathias.nyman@linux.intel.com xhci: Force Maximum Packet size for Full-speed bulk devices to valid range.
Malcolm Priestley tvboxspy@gmail.com staging: vt6656: fix sign of rx_dbm to bb_pre_ed_rssi.
Suren Baghdasaryan surenb@google.com staging: android: ashmem: Disallow ashmem memory from being remapped
Jiri Slaby jslaby@suse.cz vt: selection, handle pending signals in paste_selection
Linus Torvalds torvalds@linux-foundation.org floppy: check FDC index for errors before assigning it
Davide Caratti dcaratti@redhat.com net/sched: flower: add missing validation of TCA_FLOWER_FLAGS
Davide Caratti dcaratti@redhat.com net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS
Firo Yang firo.yang@suse.com enic: prevent waking up stopped tx queues over watchdog reset
Jaihind Yadav jaihindyadav@codeaurora.org selinux: ensure we cleanup the internal AVC counters on error in avc_update()
Vasily Averin vvs@virtuozzo.com help_next should increase position index
Zhiqiang Liu liuzhiqiang26@huawei.com brd: check and limit max_part par
Shubhrajyoti Datta shubhrajyoti.datta@xilinx.com microblaze: Prevent the overflow of the start
Andrei Otcheretianski andrei.otcheretianski@intel.com iwlwifi: mvm: Fix thermal zone registration
Zenghui Yu yuzenghui@huawei.com irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL
Coly Li colyli@suse.de bcache: explicity type cast in bset_bkey_last()
Yunfeng Ye yeyunfeng@huawei.com reiserfs: prevent NULL pointer dereference in reiserfs_insert_item()
Nathan Chancellor natechancellor@gmail.com lib/scatterlist.c: adjust indentation in __sg_alloc_table
wangyan wangyan122@huawei.com ocfs2: fix a NULL pointer dereference when call ocfs2_update_inode_fsync_trans()
Daniel Vetter daniel.vetter@ffwll.ch radeon: insert 10ms sleep in dce5_crtc_load_lut
Vasily Averin vvs@virtuozzo.com trigger_next should increase position index
Vasily Averin vvs@virtuozzo.com ftrace: fpid_next() should increase position index
Ben Skeggs bskeggs@redhat.com drm/nouveau/disp/nv50-: prevent oops when no channel method map provided
Marc Zyngier maz@kernel.org irqchip/gic-v3: Only provision redistributors that are enabled in ACPI
Ronnie Sahlberg lsahlber@redhat.com cifs: fix NULL dereference in match_prepath
Colin Ian King colin.king@canonical.com iwlegacy: ensure loop counter addr does not wrap and cause an infinite loop
Nathan Chancellor natechancellor@gmail.com hostap: Adjust indentation in prism2_hostapd_add_sta
Vincenzo Frascino vincenzo.frascino@arm.com ARM: 8951/1: Fix Kexec compilation issue.
zhangyi (F) yi.zhang@huawei.com jbd2: switch to use jbd2_journal_abort() when failed to submit the commit record
Oliver O'Halloran oohall@gmail.com powerpc/sriov: Remove VF eeh_dev state when disabling SR-IOV
Peter Große pegro@friiks.de ALSA: hda - Add docking station support for Lenovo Thinkpad T420s
Colin Ian King colin.king@canonical.com driver core: platform: fix u32 greater or equal to zero comparison
Vasily Gorbik gor@linux.ibm.com s390/ftrace: generate traced function stack frame
Masami Hiramatsu mhiramat@kernel.org x86/decoder: Add TEST opcode to Group3-2
Brandon Maier brandon.maier@rockwellcollins.com remoteproc: Initialize rproc_class before use
Dan Carpenter dan.carpenter@oracle.com ide: serverworks: potential overflow in svwks_set_pio_mode()
Dan Carpenter dan.carpenter@oracle.com cmd64x: potential buffer overflow in cmd64x_program_timings()
Uwe Kleine-König u.kleine-koenig@pengutronix.de pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional
Sami Tolvanen samitolvanen@google.com arm64: fix alternatives with LLVM's integrated assembler
Nick Black nlb@google.com scsi: iscsi: Don't destroy session if there are outstanding connections
Will Deacon will@kernel.org iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE
Tony Lindgren tony@atomide.com usb: musb: omap2430: Get rid of musb .set_vbus for omap2430 glue
Navid Emamdoost navid.emamdoost@gmail.com drm/vmwgfx: prevent memory leak in vmw_cmdbuf_res_add
YueHaibing yuehaibing@huawei.com drm/nouveau: Fix copy-paste error in nouveau_fence_wait_uevent_handler
Ben Skeggs bskeggs@redhat.com drm/nouveau/gr/gk20a,gm200-: add terminators to method lists read from fw
Arnd Bergmann arnd@arndb.de vme: bridges: reduce stack usage
Geert Uytterhoeven geert+renesas@glider.be driver core: Print device when resources present in really_probe()
Simon Schwartz kern.simon@theschwartz.xyz driver core: platform: Prevent resouce overflow from causing infinite loops
Nathan Chancellor natechancellor@gmail.com tty: synclink_gt: Adjust indentation in several functions
Nathan Chancellor natechancellor@gmail.com tty: synclinkmp: Adjust indentation in several functions
Chen Zhou chenzhou10@huawei.com ASoC: atmel: fix build error with CONFIG_SND_ATMEL_SOC_DMA=m
Arnd Bergmann arnd@arndb.de wan: ixp4xx_hss: fix compile-testing on 64-bit
Philipp Zabel p.zabel@pengutronix.de Input: edt-ft5x06 - work around first register access error
Paul E. McKenney paulmck@kernel.org rcu: Use WRITE_ONCE() for assignments to ->pprev for hlist_nulls
Dmitry Osipenko digetx@gmail.com soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
Jan Kara jack@suse.cz udf: Fix free space reporting for metadata and virtual partitions
Shuah Khan skhan@linuxfoundation.org usbip: Fix unsafe unaligned pointer usage
Andrey Zhizhikin andrey.z@gmail.com tools lib api fs: Fix gcc9 stringop-truncation compilation error
Takashi Iwai tiwai@suse.de ALSA: sh: Fix compile warning wrt const
Jiewei Ke kejiewei.cn@gmail.com RDMA/rxe: Fix error type of mmap_offset
Geert Uytterhoeven geert+renesas@glider.be pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs
Chanwoo Choi cw00.choi@samsung.com PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency
Valdis Kletnieks valdis.kletnieks@vt.edu x86/vdso: Provide missing include file
Geert Uytterhoeven geert+renesas@glider.be ARM: dts: r8a7779: Add device node for ARM global timer
Bibby Hsieh bibby.hsieh@mediatek.com drm/mediatek: handle events when enabling/disabling crtc
Nathan Chancellor natechancellor@gmail.com scsi: aic7xxx: Adjust indentation in ahc_find_syncrate
Erik Kaneda erik.kaneda@intel.com ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1
Aditya Pakki pakki001@umn.edu orinoco: avoid assertion in case of NULL pointer
Phong Tran tranmanphong@gmail.com rtlwifi: rtl_pci: Fix -Wcast-function-type
Phong Tran tranmanphong@gmail.com iwlegacy: Fix -Wcast-function-type
Phong Tran tranmanphong@gmail.com ipw2x00: Fix -Wcast-function-type
Phong Tran tranmanphong@gmail.com b43legacy: Fix -Wcast-function-type
Nathan Chancellor natechancellor@gmail.com ALSA: usx2y: Adjust indentation in snd_usX2Y_hwdep_dsp_status
Jan Kara jack@suse.cz reiserfs: Fix spurious unlock in reiserfs_fill_super() error handling
Nathan Chancellor natechancellor@gmail.com media: v4l2-device.h: Explicitly compare grp{id,mask} to zero in v4l2_device macros
Mao Wenan maowenan@huawei.com NFC: port100: Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu().
Navid Emamdoost navid.emamdoost@gmail.com PCI/IOV: Fix memory leak in pci_iov_add_virtfn()
Rasmus Villemoes linux@rasmusvillemoes.dk net/wan/fsl_ucc_hdlc: reject muram offsets above 64K
Miquel Raynal miquel.raynal@bootlin.com regulator: rk808: Lower log level on optional GPIOs being not available
yu kuai yukuai3@huawei.com drm/amdgpu: remove 4 set but not used variable in amdgpu_atombios_get_connector_info_from_object_table
Douglas Anderson dianders@chromium.org clk: qcom: rcg2: Don't crash if our parent can't be found; return an error
Masahiro Yamada masahiroy@kernel.org kconfig: fix broken dependency in randconfig-generated .config
zhangyi (F) yi.zhang@huawei.com ext4, jbd2: ensure panic when aborting with zero errno
Steven Rostedt (VMware) rostedt@goodmis.org tracing: Fix very unlikely race of registering two stat tracers
Luis Henriques luis.henriques@canonical.com tracing: Fix tracing_stat return values in error handling paths
Arvind Sankar nivedita@alum.mit.edu x86/sysfb: Fix check for bad VRAM size
Kai Li li.kai4@h3c.com jbd2: clear JBD2_ABORT flag before journal_reset to update log tail info when load journal
Jia-Ju Bai baijiaju1990@gmail.com usb: gadget: udc: fix possible sleep-in-atomic-context bugs in gr_probe()
Jia-Ju Bai baijiaju1990@gmail.com uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()
David S. Miller davem@davemloft.net sparc: Add .exit.data section.
Tiezhu Yang yangtiezhu@loongson.cn MIPS: Loongson: Fix potential NULL dereference in loongson3_platform_init()
Ard Biesheuvel ardb@kernel.org efi/x86: Map the entire EFI vendor string before copying it
Hans de Goede hdegoede@redhat.com pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins
Jia-Ju Bai baijiaju1990@gmail.com media: sti: bdisp: fix a possible sleep-in-atomic-context bug in bdisp_device_run()
Jia-Ju Bai baijiaju1990@gmail.com gpio: gpio-grgpio: fix possible sleep-in-atomic-context bugs in grgpio_irq_map/unmap()
Oliver O'Halloran oohall@gmail.com powerpc/powernv/iov: Ensure the pdn for VFs always contains a valid PE number
Eugen Hristev eugen.hristev@microchip.com media: i2c: mt9v032: fix enum mbus codes and frame sizes
Christophe JAILLET christophe.jaillet@wanadoo.fr pxa168fb: Fix the function used to release some memory in an error handling path
Geert Uytterhoeven geert+renesas@glider.be pinctrl: sh-pfc: sh7264: Fix CAN function GPIOs
Vladimir Oltean olteanv@gmail.com gianfar: Fix TX timestamping with a stacked DSA driver
Dan Carpenter dan.carpenter@oracle.com brcmfmac: Fix use after free in brcmf_sdio_readframes()
Peter Zijlstra peterz@infradead.org cpu/hotplug, stop_machine: Fix stop_machine vs hotplug order
Paul Kocialkowski paul.kocialkowski@bootlin.com drm/gma500: Fixup fbdev stolen size usage evaluation
Sasha Levin sashal@kernel.org Revert "KVM: VMX: Add non-canonical check on writes to RTIT address MSRs"
Allen Pais allen.pais@oracle.com scsi: qla2xxx: fix a potential NULL pointer dereference
David Sterba dsterba@suse.com btrfs: print message when tree-log replay starts
zhangyi (F) yi.zhang@huawei.com jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer
zhangyi (F) yi.zhang@huawei.com jbd2: move the clearing of b_modified flag to the journal_unmap_buffer()
Mike Jones michael-a1.jones@analog.com hwmon: (pmbus/ltc2978) Fix PMBus polling of MFR_COMMON definitions.
Kan Liang kan.liang@linux.intel.com perf/x86/intel: Fix inaccurate period in context switch for auto-reload
Nathan Chancellor natechancellor@gmail.com s390/time: Fix clk type in get_tod_clock
Herbert Xu herbert@gondor.apana.org.au padata: Remove broken queue flushing
Kim Phillips kim.phillips@amd.com perf/x86/amd: Add missing L2 misses event spec to AMD Family 17h's event map
David Sterba dsterba@suse.com btrfs: log message when rw remount is attempted with unclean tree-log
Filipe Manana fdmanana@suse.com Btrfs: fix race between using extent maps and merging them
Theodore Ts'o tytso@mit.edu ext4: improve explanation of a mount failure caused by a misconfigured kernel
Jan Kara jack@suse.cz ext4: fix checksum errors with indexed dirs
Andreas Dilger adilger@dilger.ca ext4: don't assume that mmp_nodename/bdevname have NUL
Arvind Sankar nivedita@alum.mit.edu ALSA: usb-audio: Apply sample rate quirk for Audioengine D1
Wenwen Wang wenwen@cs.uga.edu ecryptfs: fix a memory leak bug in ecryptfs_init_messaging()
Wenwen Wang wenwen@cs.uga.edu ecryptfs: fix a memory leak bug in parse_tag_1_packet()
Takashi Iwai tiwai@suse.de ALSA: hda: Use scnprintf() for printing texts for sysfs/procfs
Paolo Bonzini pbonzini@redhat.com KVM: x86: emulate RDPID
Andy Lutomirski luto@kernel.org x86/vdso: Use RDPID in preference to LSL when available
-------------
Diffstat:
Makefile | 4 +- arch/arm/Kconfig | 2 +- arch/arm/boot/dts/r8a7779.dtsi | 8 + arch/arm64/include/asm/alternative.h | 32 +- arch/microblaze/kernel/cpu/cache.c | 3 +- arch/mips/loongson64/loongson-3/platform.c | 3 + arch/powerpc/kernel/eeh_driver.c | 6 - arch/powerpc/kernel/pci_dn.c | 15 +- arch/powerpc/kernel/process.c | 2 + arch/powerpc/kernel/signal.c | 17 +- arch/powerpc/kernel/signal_32.c | 30 +- arch/powerpc/kernel/signal_64.c | 29 +- arch/powerpc/platforms/powernv/pci-ioda.c | 19 +- arch/powerpc/platforms/powernv/pci.c | 4 - arch/s390/include/asm/page.h | 2 +- arch/s390/include/asm/timex.h | 2 +- arch/s390/kernel/mcount.S | 15 +- arch/sh/include/cpu-sh2a/cpu/sh7269.h | 11 +- arch/sparc/kernel/vmlinux.lds.S | 6 +- arch/x86/entry/vdso/vdso32-setup.c | 1 + arch/x86/events/amd/core.c | 1 + arch/x86/events/intel/ds.c | 2 + arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/vgtod.h | 7 +- arch/x86/kernel/cpu/mcheck/mce_amd.c | 50 +- arch/x86/kernel/sysfb_simplefb.c | 2 +- arch/x86/kvm/cpuid.c | 7 +- arch/x86/kvm/emulate.c | 22 +- arch/x86/kvm/irq_comm.c | 2 +- arch/x86/kvm/lapic.c | 4 +- arch/x86/kvm/vmx.c | 102 +- arch/x86/kvm/vmx/vmx.c | 8033 -------------------- arch/x86/lib/x86-opcode-map.txt | 2 +- arch/x86/platform/efi/efi.c | 13 +- drivers/acpi/acpica/dsfield.c | 2 +- drivers/acpi/acpica/dswload.c | 21 + drivers/ata/ahci.c | 7 + drivers/ata/libata-core.c | 21 + drivers/base/dd.c | 5 +- drivers/base/platform.c | 12 +- drivers/block/brd.c | 22 +- drivers/block/floppy.c | 7 +- drivers/clk/qcom/clk-rcg2.c | 3 + drivers/devfreq/Kconfig | 3 +- drivers/devfreq/event/Kconfig | 2 +- drivers/gpio/gpio-grgpio.c | 10 +- drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c | 19 +- drivers/gpu/drm/gma500/framebuffer.c | 8 +- drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 8 + drivers/gpu/drm/nouveau/nouveau_fence.c | 2 +- .../gpu/drm/nouveau/nvkm/engine/disp/channv50.c | 2 + drivers/gpu/drm/nouveau/nvkm/engine/gr/gk20a.c | 21 +- drivers/gpu/drm/radeon/radeon_display.c | 2 + drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c | 4 +- drivers/hwmon/pmbus/ltc2978.c | 4 +- drivers/ide/cmd64x.c | 3 + drivers/ide/serverworks.c | 6 + drivers/infiniband/sw/rxe/rxe_verbs.h | 2 +- drivers/infiniband/ulp/isert/ib_isert.c | 12 + drivers/input/touchscreen/edt-ft5x06.c | 7 + drivers/iommu/arm-smmu-v3.c | 3 +- drivers/irqchip/irq-gic-v3-its.c | 2 +- drivers/irqchip/irq-gic-v3.c | 9 +- drivers/md/bcache/bset.h | 3 +- drivers/media/i2c/mt9v032.c | 10 +- drivers/media/platform/sti/bdisp/bdisp-hw.c | 6 +- drivers/net/ethernet/cisco/enic/enic_main.c | 2 +- drivers/net/ethernet/freescale/gianfar.c | 10 +- drivers/net/wan/fsl_ucc_hdlc.c | 5 + drivers/net/wan/ixp4xx_hss.c | 4 +- drivers/net/wireless/broadcom/b43legacy/main.c | 5 +- .../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 1 + drivers/net/wireless/intel/ipw2x00/ipw2100.c | 7 +- drivers/net/wireless/intel/ipw2x00/ipw2200.c | 5 +- drivers/net/wireless/intel/iwlegacy/3945-mac.c | 5 +- drivers/net/wireless/intel/iwlegacy/4965-mac.c | 5 +- drivers/net/wireless/intel/iwlegacy/common.c | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/tt.c | 4 +- drivers/net/wireless/intersil/hostap/hostap_ap.c | 2 +- .../net/wireless/intersil/orinoco/orinoco_usb.c | 3 +- drivers/net/wireless/realtek/rtlwifi/pci.c | 10 +- drivers/nfc/port100.c | 2 +- drivers/pci/iov.c | 1 + drivers/pinctrl/intel/pinctrl-baytrail.c | 8 +- drivers/pinctrl/sh-pfc/pfc-sh7264.c | 9 +- drivers/pinctrl/sh-pfc/pfc-sh7269.c | 39 +- drivers/pwm/pwm-omap-dmtimer.c | 7 +- drivers/regulator/rk808-regulator.c | 2 +- drivers/remoteproc/remoteproc_core.c | 2 +- drivers/scsi/aic7xxx/aic7xxx_core.c | 2 +- drivers/scsi/iscsi_tcp.c | 4 + drivers/scsi/qla2xxx/qla_os.c | 19 +- drivers/scsi/scsi_transport_iscsi.c | 26 +- drivers/soc/tegra/fuse/tegra-apbmisc.c | 2 +- drivers/staging/android/ashmem.c | 28 + drivers/staging/greybus/audio_manager.c | 2 +- drivers/staging/rtl8188eu/os_dep/ioctl_linux.c | 4 +- drivers/staging/vt6656/dpc.c | 2 +- drivers/target/iscsi/iscsi_target.c | 16 +- drivers/tty/serial/atmel_serial.c | 3 +- drivers/tty/serial/imx.c | 2 +- drivers/tty/synclink_gt.c | 18 +- drivers/tty/synclinkmp.c | 24 +- drivers/tty/vt/selection.c | 7 +- drivers/tty/vt/vt_ioctl.c | 75 +- drivers/uio/uio_dmem_genirq.c | 6 +- drivers/usb/core/hub.c | 5 - drivers/usb/core/quirks.c | 3 + drivers/usb/gadget/composite.c | 8 +- drivers/usb/gadget/udc/gr_udc.c | 16 +- drivers/usb/host/xhci-mem.c | 12 +- drivers/usb/host/xhci-pci.c | 4 +- drivers/usb/musb/omap2430.c | 2 - drivers/usb/storage/uas.c | 23 +- drivers/video/fbdev/pxa168fb.c | 6 +- drivers/vme/bridges/vme_fake.c | 30 +- drivers/xen/preempt.c | 4 +- fs/btrfs/disk-io.c | 1 + fs/btrfs/extent_map.c | 11 + fs/btrfs/ordered-data.c | 7 +- fs/btrfs/super.c | 2 + fs/cifs/connect.c | 6 +- fs/ecryptfs/crypto.c | 6 +- fs/ecryptfs/keystore.c | 2 +- fs/ecryptfs/messaging.c | 1 + fs/ext4/dir.c | 14 +- fs/ext4/ext4.h | 14 +- fs/ext4/inode.c | 24 +- fs/ext4/migrate.c | 27 +- fs/ext4/mmp.c | 12 +- fs/ext4/namei.c | 8 + fs/ext4/super.c | 20 +- fs/jbd2/checkpoint.c | 2 +- fs/jbd2/commit.c | 50 +- fs/jbd2/journal.c | 21 +- fs/jbd2/transaction.c | 10 +- fs/ocfs2/journal.h | 8 +- fs/orangefs/orangefs-debugfs.c | 1 + fs/reiserfs/stree.c | 3 +- fs/reiserfs/super.c | 2 +- fs/udf/super.c | 22 +- include/linux/libata.h | 1 + include/linux/list_nulls.h | 8 +- include/linux/rculist_nulls.h | 8 +- include/media/v4l2-device.h | 12 +- include/scsi/iscsi_proto.h | 1 - include/sound/rawmidi.h | 6 +- ipc/sem.c | 6 +- kernel/cpu.c | 13 +- kernel/padata.c | 45 +- kernel/trace/ftrace.c | 5 +- kernel/trace/trace_events_trigger.c | 5 +- kernel/trace/trace_stat.c | 31 +- lib/scatterlist.c | 2 +- lib/stackdepot.c | 12 +- net/netfilter/xt_bpf.c | 3 + net/netfilter/xt_hashlimit.c | 10 + net/sched/cls_flower.c | 1 + net/sched/cls_matchall.c | 1 + scripts/kconfig/confdata.c | 2 +- security/selinux/avc.c | 2 +- sound/core/seq/seq_clientmgr.c | 4 +- sound/core/seq/seq_queue.c | 29 +- sound/core/seq/seq_timer.c | 13 +- sound/core/seq/seq_timer.h | 3 +- sound/hda/hdmi_chmap.c | 2 +- sound/pci/hda/hda_codec.c | 2 +- sound/pci/hda/hda_eld.c | 2 +- sound/pci/hda/hda_sysfs.c | 4 +- sound/pci/hda/patch_conexant.c | 1 + sound/sh/aica.c | 4 +- sound/soc/atmel/Kconfig | 2 + sound/usb/quirks.c | 1 + sound/usb/usx2y/usX2Yhwdep.c | 2 +- tools/lib/api/fs/fs.c | 4 +- tools/objtool/arch/x86/lib/x86-opcode-map.txt | 2 +- tools/usb/usbip/src/usbip_network.c | 40 +- tools/usb/usbip/src/usbip_network.h | 12 +- 178 files changed, 1158 insertions(+), 8617 deletions(-)
From: Andy Lutomirski luto@kernel.org
commit a582c540ac1b10f0a7d37415e04c4af42409fd08 upstream.
RDPID is a new instruction that reads MSR_TSC_AUX quickly. This should be considerably faster than reading the GDT. Add a cpufeature for it and use it from __vdso_getcpu() when available.
Tested-by: Megha Dey megha.dey@intel.com Signed-off-by: Andy Lutomirski luto@kernel.org Cc: Borislav Petkov bp@alien8.de Cc: Brian Gerst brgerst@gmail.com Cc: Denys Vlasenko dvlasenk@redhat.com Cc: H. Peter Anvin hpa@zytor.com Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Link: http://lkml.kernel.org/r/4f6c3a22012d10f1c65b9ca15800e01b42c7d39d.1479320367... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/vgtod.h | 7 ++++++- 2 files changed, 7 insertions(+), 1 deletion(-)
--- a/arch/x86/include/asm/cpufeatures.h +++ b/arch/x86/include/asm/cpufeatures.h @@ -305,6 +305,7 @@ /* Intel-defined CPU features, CPUID level 0x00000007:0 (ecx), word 16 */ #define X86_FEATURE_PKU (16*32+ 3) /* Protection Keys for Userspace */ #define X86_FEATURE_OSPKE (16*32+ 4) /* OS Protection Keys Enable */ +#define X86_FEATURE_RDPID (16*32+ 22) /* RDPID instruction */
/* AMD-defined CPU features, CPUID level 0x80000007 (ebx), word 17 */ #define X86_FEATURE_OVERFLOW_RECOV (17*32+0) /* MCA overflow recovery support */ --- a/arch/x86/include/asm/vgtod.h +++ b/arch/x86/include/asm/vgtod.h @@ -89,8 +89,13 @@ static inline unsigned int __getcpu(void * works on all CPUs. This is volatile so that it orders * correctly wrt barrier() and to keep gcc from cleverly * hoisting it out of the calling function. + * + * If RDPID is available, use it. */ - asm volatile ("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG)); + alternative_io ("lsl %[p],%[seg]", + ".byte 0xf3,0x0f,0xc7,0xf8", /* RDPID %eax/rax */ + X86_FEATURE_RDPID, + [p] "=a" (p), [seg] "r" (__PER_CPU_SEG));
return p; }
From: Paolo Bonzini pbonzini@redhat.com
commit fb6d4d340e0532032c808a9933eaaa7b8de435ab upstream.
This is encoded as F3 0F C7 /7 with a register argument. The register argument is the second array in the group9 GroupDual, while F3 is the fourth element of a Prefix.
Reviewed-by: Wanpeng Li wanpeng.li@hotmail.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/x86/kvm/cpuid.c | 7 ++++++- arch/x86/kvm/emulate.c | 22 +++++++++++++++++++++- arch/x86/kvm/vmx.c | 15 +++++++++++++++ 3 files changed, 42 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -279,13 +279,18 @@ static int __do_cpuid_ent_emulated(struc { switch (func) { case 0: - entry->eax = 1; /* only one leaf currently */ + entry->eax = 7; ++*nent; break; case 1: entry->ecx = F(MOVBE); ++*nent; break; + case 7: + entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX; + if (index == 0) + entry->ecx = F(RDPID); + ++*nent; default: break; } --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -3531,6 +3531,16 @@ static int em_cwd(struct x86_emulate_ctx return X86EMUL_CONTINUE; }
+static int em_rdpid(struct x86_emulate_ctxt *ctxt) +{ + u64 tsc_aux = 0; + + if (ctxt->ops->get_msr(ctxt, MSR_TSC_AUX, &tsc_aux)) + return emulate_gp(ctxt, 0); + ctxt->dst.val = tsc_aux; + return X86EMUL_CONTINUE; +} + static int em_rdtsc(struct x86_emulate_ctxt *ctxt) { u64 tsc = 0; @@ -4391,10 +4401,20 @@ static const struct opcode group8[] = { F(DstMem | SrcImmByte | Lock | PageTable, em_btc), };
+/* + * The "memory" destination is actually always a register, since we come + * from the register case of group9. + */ +static const struct gprefix pfx_0f_c7_7 = { + N, N, N, II(DstMem | ModRM | Op3264 | EmulateOnUD, em_rdpid, rdtscp), +}; + + static const struct group_dual group9 = { { N, I(DstMem64 | Lock | PageTable, em_cmpxchg8b), N, N, N, N, N, N, }, { - N, N, N, N, N, N, N, N, + N, N, N, N, N, N, N, + GP(0, &pfx_0f_c7_7), } };
static const struct opcode group11[] = { --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -11339,6 +11339,21 @@ static int vmx_check_intercept(struct kv struct x86_instruction_info *info, enum x86_intercept_stage stage) { + struct vmcs12 *vmcs12 = get_vmcs12(vcpu); + struct x86_emulate_ctxt *ctxt = &vcpu->arch.emulate_ctxt; + + /* + * RDPID causes #UD if disabled through secondary execution controls. + * Because it is marked as EmulateOnUD, we need to intercept it here. + */ + if (info->intercept == x86_intercept_rdtscp && + !nested_cpu_has2(vmcs12, SECONDARY_EXEC_RDTSCP)) { + ctxt->exception.vector = UD_VECTOR; + ctxt->exception.error_code_valid = false; + return X86EMUL_PROPAGATE_FAULT; + } + + /* TODO: check more intercepts... */ return X86EMUL_CONTINUE; }
From: Takashi Iwai tiwai@suse.de
commit 44eeb081b8630bb3ad3cd381d1ae1831463e48bb upstream.
Some code in HD-audio driver calls snprintf() in a loop and still expects that the return value were actually written size, while snprintf() returns the expected would-be length instead. When the given buffer limit were small, this leads to a buffer overflow.
Use scnprintf() for addressing those issues. It returns the actually written size unlike snprintf().
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200218091409.27162-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- sound/hda/hdmi_chmap.c | 2 +- sound/pci/hda/hda_codec.c | 2 +- sound/pci/hda/hda_eld.c | 2 +- sound/pci/hda/hda_sysfs.c | 4 ++-- 4 files changed, 5 insertions(+), 5 deletions(-)
--- a/sound/hda/hdmi_chmap.c +++ b/sound/hda/hdmi_chmap.c @@ -249,7 +249,7 @@ void snd_hdac_print_channel_allocation(i
for (i = 0, j = 0; i < ARRAY_SIZE(cea_speaker_allocation_names); i++) { if (spk_alloc & (1 << i)) - j += snprintf(buf + j, buflen - j, " %s", + j += scnprintf(buf + j, buflen - j, " %s", cea_speaker_allocation_names[i]); } buf[j] = '\0'; /* necessary when j == 0 */ --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -4104,7 +4104,7 @@ void snd_print_pcm_bits(int pcm, char *b
for (i = 0, j = 0; i < ARRAY_SIZE(bits); i++) if (pcm & (AC_SUPPCM_BITS_8 << i)) - j += snprintf(buf + j, buflen - j, " %d", bits[i]); + j += scnprintf(buf + j, buflen - j, " %d", bits[i]);
buf[j] = '\0'; /* necessary when j == 0 */ } --- a/sound/pci/hda/hda_eld.c +++ b/sound/pci/hda/hda_eld.c @@ -373,7 +373,7 @@ static void hdmi_print_pcm_rates(int pcm
for (i = 0, j = 0; i < ARRAY_SIZE(alsa_rates); i++) if (pcm & (1 << i)) - j += snprintf(buf + j, buflen - j, " %d", + j += scnprintf(buf + j, buflen - j, " %d", alsa_rates[i]);
buf[j] = '\0'; /* necessary when j == 0 */ --- a/sound/pci/hda/hda_sysfs.c +++ b/sound/pci/hda/hda_sysfs.c @@ -221,7 +221,7 @@ static ssize_t init_verbs_show(struct de mutex_lock(&codec->user_mutex); for (i = 0; i < codec->init_verbs.used; i++) { struct hda_verb *v = snd_array_elem(&codec->init_verbs, i); - len += snprintf(buf + len, PAGE_SIZE - len, + len += scnprintf(buf + len, PAGE_SIZE - len, "0x%02x 0x%03x 0x%04x\n", v->nid, v->verb, v->param); } @@ -271,7 +271,7 @@ static ssize_t hints_show(struct device mutex_lock(&codec->user_mutex); for (i = 0; i < codec->hints.used; i++) { struct hda_hint *hint = snd_array_elem(&codec->hints, i); - len += snprintf(buf + len, PAGE_SIZE - len, + len += scnprintf(buf + len, PAGE_SIZE - len, "%s = %s\n", hint->key, hint->val); } mutex_unlock(&codec->user_mutex);
From: Wenwen Wang wenwen@cs.uga.edu
commit fe2e082f5da5b4a0a92ae32978f81507ef37ec66 upstream.
In parse_tag_1_packet(), if tag 1 packet contains a key larger than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES, no cleanup is executed, leading to a memory leak on the allocated 'auth_tok_list_item'. To fix this issue, go to the label 'out_free' to perform the cleanup work.
Cc: stable@vger.kernel.org Fixes: dddfa461fc89 ("[PATCH] eCryptfs: Public key; packet management") Signed-off-by: Wenwen Wang wenwen@cs.uga.edu Signed-off-by: Tyler Hicks tyhicks@canonical.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/ecryptfs/keystore.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ecryptfs/keystore.c +++ b/fs/ecryptfs/keystore.c @@ -1285,7 +1285,7 @@ parse_tag_1_packet(struct ecryptfs_crypt printk(KERN_ERR "Enter w/ first byte != 0x%.2x\n", ECRYPTFS_TAG_1_PACKET_TYPE); rc = -EINVAL; - goto out; + goto out_free; } /* Released: wipe_auth_tok_list called in ecryptfs_parse_packet_set or * at end of function upon failure */
From: Wenwen Wang wenwen@cs.uga.edu
commit b4a81b87a4cfe2bb26a4a943b748d96a43ef20e8 upstream.
In ecryptfs_init_messaging(), if the allocation for 'ecryptfs_msg_ctx_arr' fails, the previously allocated 'ecryptfs_daemon_hash' is not deallocated, leading to a memory leak bug. To fix this issue, free 'ecryptfs_daemon_hash' before returning the error.
Cc: stable@vger.kernel.org Fixes: 88b4a07e6610 ("[PATCH] eCryptfs: Public key transport mechanism") Signed-off-by: Wenwen Wang wenwen@cs.uga.edu Signed-off-by: Tyler Hicks tyhicks@canonical.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/ecryptfs/messaging.c | 1 + 1 file changed, 1 insertion(+)
--- a/fs/ecryptfs/messaging.c +++ b/fs/ecryptfs/messaging.c @@ -397,6 +397,7 @@ int __init ecryptfs_init_messaging(void) * ecryptfs_message_buf_len), GFP_KERNEL); if (!ecryptfs_msg_ctx_arr) { + kfree(ecryptfs_daemon_hash); rc = -ENOMEM; printk(KERN_ERR "%s: Failed to allocate memory\n", __func__); goto out;
From: Arvind Sankar nivedita@alum.mit.edu
commit 93f9d1a4ac5930654c17412e3911b46ece73755a upstream.
The Audioengine D1 (0x2912:0x30c8) does support reading the sample rate, but it returns the rate in byte-reversed order.
When setting sampling rate, the driver produces these warning messages: [168840.944226] usb 3-2.2: current rate 4500480 is different from the runtime rate 44100 [168854.930414] usb 3-2.2: current rate 8436480 is different from the runtime rate 48000 [168905.185825] usb 3-2.1.2: current rate 30465 is different from the runtime rate 96000
As can be seen from the hexadecimal conversion, the current rate read back is byte-reversed from the rate that was set.
44100 == 0x00ac44, 4500480 == 0x44ac00 48000 == 0x00bb80, 8436480 == 0x80bb00 96000 == 0x017700, 30465 == 0x007701
Rather than implementing a new quirk to reverse the order, just skip checking the rate to avoid spamming the log.
Signed-off-by: Arvind Sankar nivedita@alum.mit.edu Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200211162235.1639889-1-nivedita@alum.mit.edu Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- sound/usb/quirks.c | 1 + 1 file changed, 1 insertion(+)
--- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1149,6 +1149,7 @@ bool snd_usb_get_sample_rate_quirk(struc case USB_ID(0x1de7, 0x0014): /* Phoenix Audio TMX320 */ case USB_ID(0x1de7, 0x0114): /* Phoenix Audio MT202pcs */ case USB_ID(0x21B4, 0x0081): /* AudioQuest DragonFly */ + case USB_ID(0x2912, 0x30c8): /* Audioengine D1 */ return true; } return false;
From: Andreas Dilger adilger@dilger.ca
commit 14c9ca0583eee8df285d68a0e6ec71053efd2228 upstream.
Don't assume that the mmp_nodename and mmp_bdevname strings are NUL terminated, since they are filled in by snprintf(), which is not guaranteed to do so.
Link: https://lore.kernel.org/r/1580076215-1048-1-git-send-email-adilger@dilger.ca Signed-off-by: Andreas Dilger adilger@dilger.ca Signed-off-by: Theodore Ts'o tytso@mit.edu Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/ext4/mmp.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
--- a/fs/ext4/mmp.c +++ b/fs/ext4/mmp.c @@ -119,10 +119,10 @@ void __dump_mmp_msg(struct super_block * { __ext4_warning(sb, function, line, "%s", msg); __ext4_warning(sb, function, line, - "MMP failure info: last update time: %llu, last update " - "node: %s, last update device: %s", - (long long unsigned int) le64_to_cpu(mmp->mmp_time), - mmp->mmp_nodename, mmp->mmp_bdevname); + "MMP failure info: last update time: %llu, last update node: %.*s, last update device: %.*s", + (unsigned long long)le64_to_cpu(mmp->mmp_time), + (int)sizeof(mmp->mmp_nodename), mmp->mmp_nodename, + (int)sizeof(mmp->mmp_bdevname), mmp->mmp_bdevname); }
/* @@ -153,6 +153,7 @@ static int kmmpd(void *data) mmp_check_interval = max(EXT4_MMP_CHECK_MULT * mmp_update_interval, EXT4_MMP_MIN_CHECK_INTERVAL); mmp->mmp_check_interval = cpu_to_le16(mmp_check_interval); + BUILD_BUG_ON(sizeof(mmp->mmp_bdevname) < BDEVNAME_SIZE); bdevname(bh->b_bdev, mmp->mmp_bdevname);
memcpy(mmp->mmp_nodename, init_utsname()->nodename, @@ -377,7 +378,8 @@ skip: /* * Start a kernel thread to update the MMP block periodically. */ - EXT4_SB(sb)->s_mmp_tsk = kthread_run(kmmpd, mmpd_data, "kmmpd-%s", + EXT4_SB(sb)->s_mmp_tsk = kthread_run(kmmpd, mmpd_data, "kmmpd-%.*s", + (int)sizeof(mmp->mmp_bdevname), bdevname(bh->b_bdev, mmp->mmp_bdevname)); if (IS_ERR(EXT4_SB(sb)->s_mmp_tsk)) {
From: Jan Kara jack@suse.cz
commit 48a34311953d921235f4d7bbd2111690d2e469cf upstream.
DIR_INDEX has been introduced as a compat ext4 feature. That means that even kernels / tools that don't understand the feature may modify the filesystem. This works because for kernels not understanding indexed dir format, internal htree nodes appear just as empty directory entries. Index dir aware kernels then check the htree structure is still consistent before using the data. This all worked reasonably well until metadata checksums were introduced. The problem is that these effectively made DIR_INDEX only ro-compatible because internal htree nodes store checksums in a different place than normal directory blocks. Thus any modification ignorant to DIR_INDEX (or just clearing EXT4_INDEX_FL from the inode) will effectively cause checksum mismatch and trigger kernel errors. So we have to be more careful when dealing with indexed directories on filesystems with checksumming enabled.
1) We just disallow loading any directory inodes with EXT4_INDEX_FL when DIR_INDEX is not enabled. This is harsh but it should be very rare (it means someone disabled DIR_INDEX on existing filesystem and didn't run e2fsck), e2fsck can fix the problem, and we don't want to answer the difficult question: "Should we rather corrupt the directory more or should we ignore that DIR_INDEX feature is not set?"
2) When we find out htree structure is corrupted (but the filesystem and the directory should in support htrees), we continue just ignoring htree information for reading but we refuse to add new entries to the directory to avoid corrupting it more.
Link: https://lore.kernel.org/r/20200210144316.22081-1-jack@suse.cz Fixes: dbe89444042a ("ext4: Calculate and verify checksums for htree nodes") Reviewed-by: Andreas Dilger adilger@dilger.ca Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Theodore Ts'o tytso@mit.edu Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/ext4/dir.c | 14 ++++++++------ fs/ext4/ext4.h | 5 ++++- fs/ext4/inode.c | 12 ++++++++++++ fs/ext4/namei.c | 7 +++++++ 4 files changed, 31 insertions(+), 7 deletions(-)
--- a/fs/ext4/dir.c +++ b/fs/ext4/dir.c @@ -124,12 +124,14 @@ static int ext4_readdir(struct file *fil if (err != ERR_BAD_DX_DIR) { return err; } - /* - * We don't set the inode dirty flag since it's not - * critical that it get flushed back to the disk. - */ - ext4_clear_inode_flag(file_inode(file), - EXT4_INODE_INDEX); + /* Can we just clear INDEX flag to ignore htree information? */ + if (!ext4_has_metadata_csum(sb)) { + /* + * We don't set the inode dirty flag since it's not + * critical that it gets flushed back to the disk. + */ + ext4_clear_inode_flag(inode, EXT4_INODE_INDEX); + } }
if (ext4_has_inline_data(inode)) { --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -2375,8 +2375,11 @@ int ext4_insert_dentry(struct inode *dir struct ext4_filename *fname); static inline void ext4_update_dx_flag(struct inode *inode) { - if (!ext4_has_feature_dir_index(inode->i_sb)) + if (!ext4_has_feature_dir_index(inode->i_sb)) { + /* ext4_iget() should have caught this... */ + WARN_ON_ONCE(ext4_has_feature_metadata_csum(inode->i_sb)); ext4_clear_inode_flag(inode, EXT4_INODE_INDEX); + } } static unsigned char ext4_filetype_table[] = { DT_UNKNOWN, DT_REG, DT_DIR, DT_CHR, DT_BLK, DT_FIFO, DT_SOCK, DT_LNK --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4594,6 +4594,18 @@ struct inode *ext4_iget(struct super_blo ret = -EFSCORRUPTED; goto bad_inode; } + /* + * If dir_index is not enabled but there's dir with INDEX flag set, + * we'd normally treat htree data as empty space. But with metadata + * checksumming that corrupts checksums so forbid that. + */ + if (!ext4_has_feature_dir_index(sb) && ext4_has_metadata_csum(sb) && + ext4_test_inode_flag(inode, EXT4_INODE_INDEX)) { + EXT4_ERROR_INODE(inode, + "iget: Dir with htree data on filesystem without dir_index feature."); + ret = -EFSCORRUPTED; + goto bad_inode; + } ei->i_disksize = inode->i_size; #ifdef CONFIG_QUOTA ei->i_reserved_quota = 0; --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -2148,6 +2148,13 @@ static int ext4_add_entry(handle_t *hand retval = ext4_dx_add_entry(handle, &fname, dir, inode); if (!retval || (retval != ERR_BAD_DX_DIR)) goto out; + /* Can we just ignore htree data? */ + if (ext4_has_metadata_csum(sb)) { + EXT4_ERROR_INODE(dir, + "Directory has corrupted htree index."); + retval = -EFSCORRUPTED; + goto out; + } ext4_clear_inode_flag(dir, EXT4_INODE_INDEX); dx_fallback++; ext4_mark_inode_dirty(handle, dir);
From: Theodore Ts'o tytso@mit.edu
commit d65d87a07476aa17df2dcb3ad18c22c154315bec upstream.
If CONFIG_QFMT_V2 is not enabled, but CONFIG_QUOTA is enabled, when a user tries to mount a file system with the quota or project quota enabled, the kernel will emit a very confusing messsage:
EXT4-fs warning (device vdc): ext4_enable_quotas:5914: Failed to enable quota tracking (type=0, err=-3). Please run e2fsck to fix. EXT4-fs (vdc): mount failed
We will now report an explanatory message indicating which kernel configuration options have to be enabled, to avoid customer/sysadmin confusion.
Link: https://lore.kernel.org/r/20200215012738.565735-1-tytso@mit.edu Google-Bug-Id: 149093531 Fixes: 7c319d328505b778 ("ext4: make quota as first class supported feature") Signed-off-by: Theodore Ts'o tytso@mit.edu Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/ext4/super.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-)
--- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2743,17 +2743,11 @@ static int ext4_feature_set_ok(struct su return 0; }
-#ifndef CONFIG_QUOTA - if (ext4_has_feature_quota(sb) && !readonly) { +#if !defined(CONFIG_QUOTA) || !defined(CONFIG_QFMT_V2) + if (!readonly && (ext4_has_feature_quota(sb) || + ext4_has_feature_project(sb))) { ext4_msg(sb, KERN_ERR, - "Filesystem with quota feature cannot be mounted RDWR " - "without CONFIG_QUOTA"); - return 0; - } - if (ext4_has_feature_project(sb) && !readonly) { - ext4_msg(sb, KERN_ERR, - "Filesystem with project quota feature cannot be mounted RDWR " - "without CONFIG_QUOTA"); + "The kernel was not built with CONFIG_QUOTA and CONFIG_QFMT_V2"); return 0; } #endif /* CONFIG_QUOTA */
From: Filipe Manana fdmanana@suse.com
commit ac05ca913e9f3871126d61da275bfe8516ff01ca upstream.
We have a few cases where we allow an extent map that is in an extent map tree to be merged with other extents in the tree. Such cases include the unpinning of an extent after the respective ordered extent completed or after logging an extent during a fast fsync. This can lead to subtle and dangerous problems because when doing the merge some other task might be using the same extent map and as consequence see an inconsistent state of the extent map - for example sees the new length but has seen the old start offset.
With luck this triggers a BUG_ON(), and not some silent bug, such as the following one in __do_readpage():
$ cat -n fs/btrfs/extent_io.c 3061 static int __do_readpage(struct extent_io_tree *tree, 3062 struct page *page, (...) 3127 em = __get_extent_map(inode, page, pg_offset, cur, 3128 end - cur + 1, get_extent, em_cached); 3129 if (IS_ERR_OR_NULL(em)) { 3130 SetPageError(page); 3131 unlock_extent(tree, cur, end); 3132 break; 3133 } 3134 extent_offset = cur - em->start; 3135 BUG_ON(extent_map_end(em) <= cur); (...)
Consider the following example scenario, where we end up hitting the BUG_ON() in __do_readpage().
We have an inode with a size of 8KiB and 2 extent maps:
extent A: file offset 0, length 4KiB, disk_bytenr = X, persisted on disk by a previous transaction
extent B: file offset 4KiB, length 4KiB, disk_bytenr = X + 4KiB, not yet persisted but writeback started for it already. The extent map is pinned since there's writeback and an ordered extent in progress, so it can not be merged with extent map A yet
The following sequence of steps leads to the BUG_ON():
1) The ordered extent for extent B completes, the respective page gets its writeback bit cleared and the extent map is unpinned, at that point it is not yet merged with extent map A because it's in the list of modified extents;
2) Due to memory pressure, or some other reason, the MM subsystem releases the page corresponding to extent B - btrfs_releasepage() is called and returns 1, meaning the page can be released as it's not dirty, not under writeback anymore and the extent range is not locked in the inode's iotree. However the extent map is not released, either because we are not in a context that allows memory allocations to block or because the inode's size is smaller than 16MiB - in this case our inode has a size of 8KiB;
3) Task B needs to read extent B and ends up __do_readpage() through the btrfs_readpage() callback. At __do_readpage() it gets a reference to extent map B;
4) Task A, doing a fast fsync, calls clear_em_loggin() against extent map B while holding the write lock on the inode's extent map tree - this results in try_merge_map() being called and since it's possible to merge extent map B with extent map A now (the extent map B was removed from the list of modified extents), the merging begins - it sets extent map B's start offset to 0 (was 4KiB), but before it increments the map's length to 8KiB (4kb + 4KiB), task A is at:
BUG_ON(extent_map_end(em) <= cur);
The call to extent_map_end() sees the extent map has a start of 0 and a length still at 4KiB, so it returns 4KiB and 'cur' is 4KiB, so the BUG_ON() is triggered.
So it's dangerous to modify an extent map that is in the tree, because some other task might have got a reference to it before and still using it, and needs to see a consistent map while using it. Generally this is very rare since most paths that lookup and use extent maps also have the file range locked in the inode's iotree. The fsync path is pretty much the only exception where we don't do it to avoid serialization with concurrent reads.
Fix this by not allowing an extent map do be merged if if it's being used by tasks other then the one attempting to merge the extent map (when the reference count of the extent map is greater than 2).
Reported-by: ryusuke1925 st13s20@gm.ibaraki-ct.ac.jp Reported-by: Koki Mitani koki.mitani.xg@hco.ntt.co.jp Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206211 CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik josef@toxicpanda.com Signed-off-by: Filipe Manana fdmanana@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/btrfs/extent_map.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
--- a/fs/btrfs/extent_map.c +++ b/fs/btrfs/extent_map.c @@ -227,6 +227,17 @@ static void try_merge_map(struct extent_ struct extent_map *merge = NULL; struct rb_node *rb;
+ /* + * We can't modify an extent map that is in the tree and that is being + * used by another task, as it can cause that other task to see it in + * inconsistent state during the merging. We always have 1 reference for + * the tree and 1 for this task (which is unpinning the extent map or + * clearing the logging flag), so anything > 2 means it's being used by + * other tasks too. + */ + if (atomic_read(&em->refs) > 2) + return; + if (em->start != 0) { rb = rb_prev(&em->rb_node); if (rb)
From: David Sterba dsterba@suse.com
commit 10a3a3edc5b89a8cd095bc63495fb1e0f42047d9 upstream.
A remount to a read-write filesystem is not safe when there's tree-log to be replayed. Files that could be opened until now might be affected by the changes in the tree-log.
A regular mount is needed to replay the log so the filesystem presents the consistent view with the pending changes included.
CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Anand Jain anand.jain@oracle.com Reviewed-by: Johannes Thumshirn johannes.thumshirn@wdc.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/btrfs/super.c | 2 ++ 1 file changed, 2 insertions(+)
--- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -1809,6 +1809,8 @@ static int btrfs_remount(struct super_bl }
if (btrfs_super_log_root(fs_info->super_copy) != 0) { + btrfs_warn(fs_info, + "mount required to replay tree-log, cannot remount read-write"); ret = -EINVAL; goto restore; }
From: Kim Phillips kim.phillips@amd.com
commit 25d387287cf0330abf2aad761ce6eee67326a355 upstream.
Commit 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h"), claimed L2 misses were unsupported, due to them not being found in its referenced documentation, whose link has now moved [1].
That old documentation listed PMCx064 unit mask bit 3 as:
"LsRdBlkC: LS Read Block C S L X Change to X Miss."
and bit 0 as:
"IcFillMiss: IC Fill Miss"
We now have new public documentation [2] with improved descriptions, that clearly indicate what events those unit mask bits represent:
Bit 3 now clearly states:
"LsRdBlkC: Data Cache Req Miss in L2 (all types)"
and bit 0 is:
"IcFillMiss: Instruction Cache Req Miss in L2."
So we can now add support for L2 misses in perf's genericised events as PMCx064 with both the above unit masks.
[1] The commit's original documentation reference, "Processor Programming Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors", originally available here:
https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0F...
is now available here:
https://developer.amd.com/wordpress/media/2017/11/54945_PPR_Family_17h_Model...
[2] "Processor Programming Reference (PPR) for Family 17h Model 31h, Revision B0 Processors", available here:
https://developer.amd.com/wp-content/resources/55803_0.54-PUB.pdf
Fixes: 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h") Reported-by: Babu Moger babu.moger@amd.com Signed-off-by: Kim Phillips kim.phillips@amd.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Signed-off-by: Ingo Molnar mingo@kernel.org Tested-by: Babu Moger babu.moger@amd.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200121171232.28839-1-kim.phillips@amd.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/x86/events/amd/core.c | 1 + 1 file changed, 1 insertion(+)
--- a/arch/x86/events/amd/core.c +++ b/arch/x86/events/amd/core.c @@ -239,6 +239,7 @@ static const u64 amd_f17h_perfmon_event_ [PERF_COUNT_HW_CPU_CYCLES] = 0x0076, [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, [PERF_COUNT_HW_CACHE_REFERENCES] = 0xff60, + [PERF_COUNT_HW_CACHE_MISSES] = 0x0964, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c2, [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c3, [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x0287,
From: Herbert Xu herbert@gondor.apana.org.au
commit 07928d9bfc81640bab36f5190e8725894d93b659 upstream.
The function padata_flush_queues is fundamentally broken because it cannot force padata users to complete the request that is underway. IOW padata has to passively wait for the completion of any outstanding work.
As it stands flushing is used in two places. Its use in padata_stop is simply unnecessary because nothing depends on the queues to be flushed afterwards.
The other use in padata_replace is more substantial as we depend on it to free the old pd structure. This patch instead uses the pd->refcnt to dynamically free the pd structure once all requests are complete.
Fixes: 2b73b07ab8a4 ("padata: Flush the padata queues actively") Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Reviewed-by: Daniel Jordan daniel.m.jordan@oracle.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au [dj: leave "pd->pinst = pinst" assignment in padata_alloc_pd()] Signed-off-by: Daniel Jordan daniel.m.jordan@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- kernel/padata.c | 45 ++++++++++++--------------------------------- 1 file changed, 12 insertions(+), 33 deletions(-)
--- a/kernel/padata.c +++ b/kernel/padata.c @@ -34,6 +34,8 @@
#define MAX_OBJ_NUM 1000
+static void padata_free_pd(struct parallel_data *pd); + static int padata_index_to_cpu(struct parallel_data *pd, int cpu_index) { int cpu, target_cpu; @@ -301,6 +303,7 @@ static void padata_serial_worker(struct struct padata_serial_queue *squeue; struct parallel_data *pd; LIST_HEAD(local_list); + int cnt;
local_bh_disable(); squeue = container_of(serial_work, struct padata_serial_queue, work); @@ -310,6 +313,8 @@ static void padata_serial_worker(struct list_replace_init(&squeue->serial.list, &local_list); spin_unlock(&squeue->serial.lock);
+ cnt = 0; + while (!list_empty(&local_list)) { struct padata_priv *padata;
@@ -319,9 +324,12 @@ static void padata_serial_worker(struct list_del_init(&padata->list);
padata->serial(padata); - atomic_dec(&pd->refcnt); + cnt++; } local_bh_enable(); + + if (atomic_sub_and_test(cnt, &pd->refcnt)) + padata_free_pd(pd); }
/** @@ -444,7 +452,7 @@ static struct parallel_data *padata_allo setup_timer(&pd->timer, padata_reorder_timer, (unsigned long)pd); atomic_set(&pd->seq_nr, -1); atomic_set(&pd->reorder_objects, 0); - atomic_set(&pd->refcnt, 0); + atomic_set(&pd->refcnt, 1); pd->pinst = pinst; spin_lock_init(&pd->lock);
@@ -469,31 +477,6 @@ static void padata_free_pd(struct parall kfree(pd); }
-/* Flush all objects out of the padata queues. */ -static void padata_flush_queues(struct parallel_data *pd) -{ - int cpu; - struct padata_parallel_queue *pqueue; - struct padata_serial_queue *squeue; - - for_each_cpu(cpu, pd->cpumask.pcpu) { - pqueue = per_cpu_ptr(pd->pqueue, cpu); - flush_work(&pqueue->work); - } - - del_timer_sync(&pd->timer); - - if (atomic_read(&pd->reorder_objects)) - padata_reorder(pd); - - for_each_cpu(cpu, pd->cpumask.cbcpu) { - squeue = per_cpu_ptr(pd->squeue, cpu); - flush_work(&squeue->work); - } - - BUG_ON(atomic_read(&pd->refcnt) != 0); -} - static void __padata_start(struct padata_instance *pinst) { pinst->flags |= PADATA_INIT; @@ -507,10 +490,6 @@ static void __padata_stop(struct padata_ pinst->flags &= ~PADATA_INIT;
synchronize_rcu(); - - get_online_cpus(); - padata_flush_queues(pinst->pd); - put_online_cpus(); }
/* Replace the internal control structure with a new one. */ @@ -531,8 +510,8 @@ static void padata_replace(struct padata if (!cpumask_equal(pd_old->cpumask.cbcpu, pd_new->cpumask.cbcpu)) notification_mask |= PADATA_CPU_SERIAL;
- padata_flush_queues(pd_old); - padata_free_pd(pd_old); + if (atomic_dec_and_test(&pd_old->refcnt)) + padata_free_pd(pd_old);
if (notification_mask) blocking_notifier_call_chain(&pinst->cpumask_change_notifier,
From: Nathan Chancellor natechancellor@gmail.com
commit 0f8a206df7c920150d2aa45574fba0ab7ff6be4f upstream.
Clang warns:
In file included from ../arch/s390/boot/startup.c:3: In file included from ../include/linux/elf.h:5: In file included from ../arch/s390/include/asm/elf.h:132: In file included from ../include/linux/compat.h:10: In file included from ../include/linux/time.h:74: In file included from ../include/linux/time32.h:13: In file included from ../include/linux/timex.h:65: ../arch/s390/include/asm/timex.h:160:20: warning: passing 'unsigned char [16]' to parameter of type 'char *' converts between pointers to integer types with different sign [-Wpointer-sign] get_tod_clock_ext(clk); ^~~ ../arch/s390/include/asm/timex.h:149:44: note: passing argument to parameter 'clk' here static inline void get_tod_clock_ext(char *clk) ^
Change clk's type to just be char so that it matches what happens in get_tod_clock_ext.
Fixes: 57b28f66316d ("[S390] s390_hypfs: Add new attributes") Link: https://github.com/ClangBuiltLinux/linux/issues/861 Link: http://lkml.kernel.org/r/20200208140858.47970-1-natechancellor@gmail.com Reviewed-by: Nick Desaulniers ndesaulniers@google.com Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/s390/include/asm/timex.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/s390/include/asm/timex.h +++ b/arch/s390/include/asm/timex.h @@ -146,7 +146,7 @@ static inline void get_tod_clock_ext(cha
static inline unsigned long long get_tod_clock(void) { - unsigned char clk[STORE_CLOCK_EXT_SIZE]; + char clk[STORE_CLOCK_EXT_SIZE];
get_tod_clock_ext(clk); return *((unsigned long long *)&clk[1]);
From: Kan Liang kan.liang@linux.intel.com
commit f861854e1b435b27197417f6f90d87188003cb24 upstream.
Perf doesn't take the left period into account when auto-reload is enabled with fixed period sampling mode in context switch.
Here is the MSR trace of the perf command as below. (The MSR trace is simplified from a ftrace log.)
#perf record -e cycles:p -c 2000000 -- ./triad_loop
//The MSR trace of task schedule out //perf disable all counters, disable PEBS, disable GP counter 0, //read GP counter 0, and re-enable all counters. //The counter 0 stops at 0xfffffff82840 write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0 write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0 write_msr: MSR_P6_EVNTSEL0(186), value 40003003c rdpmc: 0, value fffffff82840 write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
//The MSR trace of the same task schedule in again //perf disable all counters, enable and set GP counter 0, //enable PEBS, and re-enable all counters. //0xffffffe17b80 (-2000000) is written to GP counter 0. write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0 write_msr: MSR_IA32_PMC0(4c1), value ffffffe17b80 write_msr: MSR_P6_EVNTSEL0(186), value 40043003c write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1 write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
When the same task schedule in again, the counter should starts from previous left. However, it starts from the fixed period -2000000 again.
A special variant of intel_pmu_save_and_restart() is used for auto-reload, which doesn't update the hwc->period_left. When the monitored task schedules in again, perf doesn't know the left period. The fixed period is used, which is inaccurate.
With auto-reload, the counter always has a negative counter value. So the left period is -value. Update the period_left in intel_pmu_save_and_restart_reload().
With the patch:
//The MSR trace of task schedule out write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0 write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0 write_msr: MSR_P6_EVNTSEL0(186), value 40003003c rdpmc: 0, value ffffffe25cbc write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
//The MSR trace of the same task schedule in again write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0 write_msr: MSR_IA32_PMC0(4c1), value ffffffe25cbc write_msr: MSR_P6_EVNTSEL0(186), value 40043003c write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1 write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
Fixes: d31fc13fdcb2 ("perf/x86/intel: Fix event update for auto-reload") Signed-off-by: Kan Liang kan.liang@linux.intel.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Signed-off-by: Ingo Molnar mingo@kernel.org Link: https://lkml.kernel.org/r/20200121190125.3389-1-kan.liang@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/x86/events/intel/ds.c | 2 ++ 1 file changed, 2 insertions(+)
--- a/arch/x86/events/intel/ds.c +++ b/arch/x86/events/intel/ds.c @@ -1326,6 +1326,8 @@ intel_pmu_save_and_restart_reload(struct old = ((s64)(prev_raw_count << shift) >> shift); local64_add(new - old + count * period, &event->count);
+ local64_set(&hwc->period_left, -new); + perf_event_update_userpage(event);
return 0;
From: Mike Jones michael-a1.jones@analog.com
commit cf2b012c90e74e85d8aea7d67e48868069cfee0c upstream.
Change 21537dc driver PMBus polling of MFR_COMMON from bits 5/4 to bits 6/5. This fixs a LTC297X family bug where polling always returns not busy even when the part is busy. This fixes a LTC388X and LTM467X bug where polling used PEND and NOT_IN_TRANS, and BUSY was not polled, which can lead to NACKing of commands. LTC388X and LTM467X modules now poll BUSY and PEND, increasing reliability by eliminating NACKing of commands.
Signed-off-by: Mike Jones michael-a1.jones@analog.com Link: https://lore.kernel.org/r/1580234400-2829-2-git-send-email-michael-a1.jones@... Fixes: e04d1ce9bbb49 ("hwmon: (ltc2978) Add polling for chips requiring it") Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/hwmon/pmbus/ltc2978.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/hwmon/pmbus/ltc2978.c +++ b/drivers/hwmon/pmbus/ltc2978.c @@ -89,8 +89,8 @@ enum chips { ltc2974, ltc2975, ltc2977,
#define LTC_POLL_TIMEOUT 100 /* in milli-seconds */
-#define LTC_NOT_BUSY BIT(5) -#define LTC_NOT_PENDING BIT(4) +#define LTC_NOT_BUSY BIT(6) +#define LTC_NOT_PENDING BIT(5)
/* * LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which
From: zhangyi (F) yi.zhang@huawei.com
[ Upstream commit 6a66a7ded12baa6ebbb2e3e82f8cb91382814839 ]
There is no need to delay the clearing of b_modified flag to the transaction committing time when unmapping the journalled buffer, so just move it to the journal_unmap_buffer().
Link: https://lore.kernel.org/r/20200213063821.30455-2-yi.zhang@huawei.com Reviewed-by: Jan Kara jack@suse.cz Signed-off-by: zhangyi (F) yi.zhang@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Cc: stable@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jbd2/commit.c | 43 +++++++++++++++---------------------------- fs/jbd2/transaction.c | 10 ++++++---- 2 files changed, 21 insertions(+), 32 deletions(-)
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index d002b2b6895fe..2ee0013d86af5 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -969,34 +969,21 @@ void jbd2_journal_commit_transaction(journal_t *journal) * it. */
/* - * A buffer which has been freed while still being journaled by - * a previous transaction. - */ - if (buffer_freed(bh)) { - /* - * If the running transaction is the one containing - * "add to orphan" operation (b_next_transaction != - * NULL), we have to wait for that transaction to - * commit before we can really get rid of the buffer. - * So just clear b_modified to not confuse transaction - * credit accounting and refile the buffer to - * BJ_Forget of the running transaction. If the just - * committed transaction contains "add to orphan" - * operation, we can completely invalidate the buffer - * now. We are rather through in that since the - * buffer may be still accessible when blocksize < - * pagesize and it is attached to the last partial - * page. - */ - jh->b_modified = 0; - if (!jh->b_next_transaction) { - clear_buffer_freed(bh); - clear_buffer_jbddirty(bh); - clear_buffer_mapped(bh); - clear_buffer_new(bh); - clear_buffer_req(bh); - bh->b_bdev = NULL; - } + * A buffer which has been freed while still being journaled + * by a previous transaction, refile the buffer to BJ_Forget of + * the running transaction. If the just committed transaction + * contains "add to orphan" operation, we can completely + * invalidate the buffer now. We are rather through in that + * since the buffer may be still accessible when blocksize < + * pagesize and it is attached to the last partial page. + */ + if (buffer_freed(bh) && !jh->b_next_transaction) { + clear_buffer_freed(bh); + clear_buffer_jbddirty(bh); + clear_buffer_mapped(bh); + clear_buffer_new(bh); + clear_buffer_req(bh); + bh->b_bdev = NULL; }
if (buffer_jbddirty(bh)) { diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c index 799f96c67211d..04dd0652bb5ca 100644 --- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -2213,14 +2213,16 @@ static int journal_unmap_buffer(journal_t *journal, struct buffer_head *bh, return -EBUSY; } /* - * OK, buffer won't be reachable after truncate. We just set - * j_next_transaction to the running transaction (if there is - * one) and mark buffer as freed so that commit code knows it - * should clear dirty bits when it is done with the buffer. + * OK, buffer won't be reachable after truncate. We just clear + * b_modified to not confuse transaction credit accounting, and + * set j_next_transaction to the running transaction (if there + * is one) and mark buffer as freed so that commit code knows + * it should clear dirty bits when it is done with the buffer. */ set_buffer_freed(bh); if (journal->j_running_transaction && buffer_jbddirty(bh)) jh->b_next_transaction = journal->j_running_transaction; + jh->b_modified = 0; jbd2_journal_put_journal_head(jh); spin_unlock(&journal->j_list_lock); jbd_unlock_bh_state(bh);
From: zhangyi (F) yi.zhang@huawei.com
[ Upstream commit c96dceeabf765d0b1b1f29c3bf50a5c01315b820 ]
Commit 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from an older transaction") set the BH_Freed flag when forgetting a metadata buffer which belongs to the committing transaction, it indicate the committing process clear dirty bits when it is done with the buffer. But it also clear the BH_Mapped flag at the same time, which may trigger below NULL pointer oops when block_size < PAGE_SIZE.
rmdir 1 kjournald2 mkdir 2 jbd2_journal_commit_transaction commit transaction N jbd2_journal_forget set_buffer_freed(bh1) jbd2_journal_commit_transaction commit transaction N+1 ... clear_buffer_mapped(bh1) ext4_getblk(bh2 ummapped) ... grow_dev_page init_page_buffers bh1->b_private=NULL bh2->b_private=NULL jbd2_journal_put_journal_head(jh1) __journal_remove_journal_head(hb1) jh1 is NULL and trigger oops
*) Dir entry block bh1 and bh2 belongs to one page, and the bh2 has already been unmapped.
For the metadata buffer we forgetting, we should always keep the mapped flag and clear the dirty flags is enough, so this patch pick out the these buffers and keep their BH_Mapped flag.
Link: https://lore.kernel.org/r/20200213063821.30455-3-yi.zhang@huawei.com Fixes: 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from an older transaction") Reviewed-by: Jan Kara jack@suse.cz Signed-off-by: zhangyi (F) yi.zhang@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Cc: stable@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jbd2/commit.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 2ee0013d86af5..72b5bbfd38447 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -978,12 +978,29 @@ void jbd2_journal_commit_transaction(journal_t *journal) * pagesize and it is attached to the last partial page. */ if (buffer_freed(bh) && !jh->b_next_transaction) { + struct address_space *mapping; + clear_buffer_freed(bh); clear_buffer_jbddirty(bh); - clear_buffer_mapped(bh); - clear_buffer_new(bh); - clear_buffer_req(bh); - bh->b_bdev = NULL; + + /* + * Block device buffers need to stay mapped all the + * time, so it is enough to clear buffer_jbddirty and + * buffer_freed bits. For the file mapping buffers (i.e. + * journalled data) we need to unmap buffer and clear + * more bits. We also need to be careful about the check + * because the data page mapping can get cleared under + * out hands, which alse need not to clear more bits + * because the page and buffers will be freed and can + * never be reused once we are done with them. + */ + mapping = READ_ONCE(bh->b_page->mapping); + if (mapping && !sb_is_blkdev_sb(mapping->host->i_sb)) { + clear_buffer_mapped(bh); + clear_buffer_new(bh); + clear_buffer_req(bh); + bh->b_bdev = NULL; + } }
if (buffer_jbddirty(bh)) {
From: David Sterba dsterba@suse.com
[ Upstream commit e8294f2f6aa6208ed0923aa6d70cea3be178309a ]
There's no logged information about tree-log replay although this is something that points to previous unclean unmount. Other filesystems report that as well.
Suggested-by: Chris Murphy lists@colorremedies.com CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Anand Jain anand.jain@oracle.com Reviewed-by: Johannes Thumshirn johannes.thumshirn@wdc.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/disk-io.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index e3524ecce3d77..390053557d4d2 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2979,6 +2979,7 @@ int open_ctree(struct super_block *sb, /* do not make disk changes in broken FS or nologreplay is given */ if (btrfs_super_log_root(disk_super) != 0 && !btrfs_test_opt(tree_root->fs_info, NOLOGREPLAY)) { + btrfs_info(fs_info, "start tree-log replay"); ret = btrfs_replay_log(fs_info, fs_devices); if (ret) { err = ret;
From: Allen Pais allen.pais@oracle.com
commit 35a79a63517981a8aea395497c548776347deda8 upstream.
alloc_workqueue is not checked for errors and as a result a potential NULL dereference could occur.
Link: https://lore.kernel.org/r/1568824618-4366-1-git-send-email-allen.pais@oracle... Signed-off-by: Allen Pais allen.pais@oracle.com Reviewed-by: Martin Wilck mwilck@suse.com Acked-by: Himanshu Madhani hmadhani@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com [Ajay: Rewrote this patch for v4.9.y, as 4.9.y codebase is different from mainline] Signed-off-by: Ajay Kaher akaher@vmware.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/scsi/qla2xxx/qla_os.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -451,6 +451,12 @@ static int qla25xx_setup_mode(struct scs goto fail; } if (ql2xmultique_tag) { + ha->wq = alloc_workqueue("qla2xxx_wq", WQ_MEM_RECLAIM, 1); + if (unlikely(!ha->wq)) { + ql_log(ql_log_warn, vha, 0x01e0, + "Failed to alloc workqueue.\n"); + goto fail; + } /* create a request queue for IO */ options |= BIT_7; req = qla25xx_create_req_que(ha, options, 0, 0, -1, @@ -458,9 +464,8 @@ static int qla25xx_setup_mode(struct scs if (!req) { ql_log(ql_log_warn, vha, 0x00e0, "Failed to create request queue.\n"); - goto fail; + goto fail2; } - ha->wq = alloc_workqueue("qla2xxx_wq", WQ_MEM_RECLAIM, 1); vha->req = ha->req_q_map[req]; options |= BIT_1; for (ques = 1; ques < ha->max_rsp_queues; ques++) { @@ -468,7 +473,7 @@ static int qla25xx_setup_mode(struct scs if (!ret) { ql_log(ql_log_warn, vha, 0x00e8, "Failed to create response queue.\n"); - goto fail2; + goto fail3; } } ha->flags.cpu_affinity_enabled = 1; @@ -482,11 +487,13 @@ static int qla25xx_setup_mode(struct scs ha->max_rsp_queues, ha->max_req_queues); } return 0; -fail2: + +fail3: qla25xx_delete_queues(vha); - destroy_workqueue(ha->wq); - ha->wq = NULL; vha->req = ha->req_q_map[0]; +fail2: + destroy_workqueue(ha->wq); + ha->wq = NULL; fail: ha->mqenable = 0; kfree(ha->req_q_map);
This reverts commit 57211b7366cc2abf784c35e537b256e7fcddc91e.
This patch isn't needed on 4.19 and older.
Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kvm/vmx/vmx.c | 8033 ---------------------------------------- 1 file changed, 8033 deletions(-) delete mode 100644 arch/x86/kvm/vmx/vmx.c
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c deleted file mode 100644 index 3791ce8d269e0..0000000000000 --- a/arch/x86/kvm/vmx/vmx.c +++ /dev/null @@ -1,8033 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Kernel-based Virtual Machine driver for Linux - * - * This module enables machines with Intel VT-x extensions to run virtual - * machines without emulation or binary translation. - * - * Copyright (C) 2006 Qumranet, Inc. - * Copyright 2010 Red Hat, Inc. and/or its affiliates. - * - * Authors: - * Avi Kivity avi@qumranet.com - * Yaniv Kamay yaniv@qumranet.com - */ - -#include <linux/frame.h> -#include <linux/highmem.h> -#include <linux/hrtimer.h> -#include <linux/kernel.h> -#include <linux/kvm_host.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/mod_devicetable.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/sched/smt.h> -#include <linux/slab.h> -#include <linux/tboot.h> -#include <linux/trace_events.h> - -#include <asm/apic.h> -#include <asm/asm.h> -#include <asm/cpu.h> -#include <asm/debugreg.h> -#include <asm/desc.h> -#include <asm/fpu/internal.h> -#include <asm/io.h> -#include <asm/irq_remapping.h> -#include <asm/kexec.h> -#include <asm/perf_event.h> -#include <asm/mce.h> -#include <asm/mmu_context.h> -#include <asm/mshyperv.h> -#include <asm/spec-ctrl.h> -#include <asm/virtext.h> -#include <asm/vmx.h> - -#include "capabilities.h" -#include "cpuid.h" -#include "evmcs.h" -#include "irq.h" -#include "kvm_cache_regs.h" -#include "lapic.h" -#include "mmu.h" -#include "nested.h" -#include "ops.h" -#include "pmu.h" -#include "trace.h" -#include "vmcs.h" -#include "vmcs12.h" -#include "vmx.h" -#include "x86.h" - -MODULE_AUTHOR("Qumranet"); -MODULE_LICENSE("GPL"); - -static const struct x86_cpu_id vmx_cpu_id[] = { - X86_FEATURE_MATCH(X86_FEATURE_VMX), - {} -}; -MODULE_DEVICE_TABLE(x86cpu, vmx_cpu_id); - -bool __read_mostly enable_vpid = 1; -module_param_named(vpid, enable_vpid, bool, 0444); - -static bool __read_mostly enable_vnmi = 1; -module_param_named(vnmi, enable_vnmi, bool, S_IRUGO); - -bool __read_mostly flexpriority_enabled = 1; -module_param_named(flexpriority, flexpriority_enabled, bool, S_IRUGO); - -bool __read_mostly enable_ept = 1; -module_param_named(ept, enable_ept, bool, S_IRUGO); - -bool __read_mostly enable_unrestricted_guest = 1; -module_param_named(unrestricted_guest, - enable_unrestricted_guest, bool, S_IRUGO); - -bool __read_mostly enable_ept_ad_bits = 1; -module_param_named(eptad, enable_ept_ad_bits, bool, S_IRUGO); - -static bool __read_mostly emulate_invalid_guest_state = true; -module_param(emulate_invalid_guest_state, bool, S_IRUGO); - -static bool __read_mostly fasteoi = 1; -module_param(fasteoi, bool, S_IRUGO); - -static bool __read_mostly enable_apicv = 1; -module_param(enable_apicv, bool, S_IRUGO); - -/* - * If nested=1, nested virtualization is supported, i.e., guests may use - * VMX and be a hypervisor for its own guests. If nested=0, guests may not - * use VMX instructions. - */ -static bool __read_mostly nested = 1; -module_param(nested, bool, S_IRUGO); - -bool __read_mostly enable_pml = 1; -module_param_named(pml, enable_pml, bool, S_IRUGO); - -static bool __read_mostly dump_invalid_vmcs = 0; -module_param(dump_invalid_vmcs, bool, 0644); - -#define MSR_BITMAP_MODE_X2APIC 1 -#define MSR_BITMAP_MODE_X2APIC_APICV 2 - -#define KVM_VMX_TSC_MULTIPLIER_MAX 0xffffffffffffffffULL - -/* Guest_tsc -> host_tsc conversion requires 64-bit division. */ -static int __read_mostly cpu_preemption_timer_multi; -static bool __read_mostly enable_preemption_timer = 1; -#ifdef CONFIG_X86_64 -module_param_named(preemption_timer, enable_preemption_timer, bool, S_IRUGO); -#endif - -#define KVM_VM_CR0_ALWAYS_OFF (X86_CR0_NW | X86_CR0_CD) -#define KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST X86_CR0_NE -#define KVM_VM_CR0_ALWAYS_ON \ - (KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST | \ - X86_CR0_WP | X86_CR0_PG | X86_CR0_PE) -#define KVM_CR4_GUEST_OWNED_BITS \ - (X86_CR4_PVI | X86_CR4_DE | X86_CR4_PCE | X86_CR4_OSFXSR \ - | X86_CR4_OSXMMEXCPT | X86_CR4_LA57 | X86_CR4_TSD) - -#define KVM_VM_CR4_ALWAYS_ON_UNRESTRICTED_GUEST X86_CR4_VMXE -#define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE) -#define KVM_RMODE_VM_CR4_ALWAYS_ON (X86_CR4_VME | X86_CR4_PAE | X86_CR4_VMXE) - -#define RMODE_GUEST_OWNED_EFLAGS_BITS (~(X86_EFLAGS_IOPL | X86_EFLAGS_VM)) - -#define MSR_IA32_RTIT_STATUS_MASK (~(RTIT_STATUS_FILTEREN | \ - RTIT_STATUS_CONTEXTEN | RTIT_STATUS_TRIGGEREN | \ - RTIT_STATUS_ERROR | RTIT_STATUS_STOPPED | \ - RTIT_STATUS_BYTECNT)) - -#define MSR_IA32_RTIT_OUTPUT_BASE_MASK \ - (~((1UL << cpuid_query_maxphyaddr(vcpu)) - 1) | 0x7f) - -/* - * These 2 parameters are used to config the controls for Pause-Loop Exiting: - * ple_gap: upper bound on the amount of time between two successive - * executions of PAUSE in a loop. Also indicate if ple enabled. - * According to test, this time is usually smaller than 128 cycles. - * ple_window: upper bound on the amount of time a guest is allowed to execute - * in a PAUSE loop. Tests indicate that most spinlocks are held for - * less than 2^12 cycles - * Time is measured based on a counter that runs at the same rate as the TSC, - * refer SDM volume 3b section 21.6.13 & 22.1.3. - */ -static unsigned int ple_gap = KVM_DEFAULT_PLE_GAP; -module_param(ple_gap, uint, 0444); - -static unsigned int ple_window = KVM_VMX_DEFAULT_PLE_WINDOW; -module_param(ple_window, uint, 0444); - -/* Default doubles per-vcpu window every exit. */ -static unsigned int ple_window_grow = KVM_DEFAULT_PLE_WINDOW_GROW; -module_param(ple_window_grow, uint, 0444); - -/* Default resets per-vcpu window every exit to ple_window. */ -static unsigned int ple_window_shrink = KVM_DEFAULT_PLE_WINDOW_SHRINK; -module_param(ple_window_shrink, uint, 0444); - -/* Default is to compute the maximum so we can never overflow. */ -static unsigned int ple_window_max = KVM_VMX_DEFAULT_PLE_WINDOW_MAX; -module_param(ple_window_max, uint, 0444); - -/* Default is SYSTEM mode, 1 for host-guest mode */ -int __read_mostly pt_mode = PT_MODE_SYSTEM; -module_param(pt_mode, int, S_IRUGO); - -static DEFINE_STATIC_KEY_FALSE(vmx_l1d_should_flush); -static DEFINE_STATIC_KEY_FALSE(vmx_l1d_flush_cond); -static DEFINE_MUTEX(vmx_l1d_flush_mutex); - -/* Storage for pre module init parameter parsing */ -static enum vmx_l1d_flush_state __read_mostly vmentry_l1d_flush_param = VMENTER_L1D_FLUSH_AUTO; - -static const struct { - const char *option; - bool for_parse; -} vmentry_l1d_param[] = { - [VMENTER_L1D_FLUSH_AUTO] = {"auto", true}, - [VMENTER_L1D_FLUSH_NEVER] = {"never", true}, - [VMENTER_L1D_FLUSH_COND] = {"cond", true}, - [VMENTER_L1D_FLUSH_ALWAYS] = {"always", true}, - [VMENTER_L1D_FLUSH_EPT_DISABLED] = {"EPT disabled", false}, - [VMENTER_L1D_FLUSH_NOT_REQUIRED] = {"not required", false}, -}; - -#define L1D_CACHE_ORDER 4 -static void *vmx_l1d_flush_pages; - -static int vmx_setup_l1d_flush(enum vmx_l1d_flush_state l1tf) -{ - struct page *page; - unsigned int i; - - if (!boot_cpu_has_bug(X86_BUG_L1TF)) { - l1tf_vmx_mitigation = VMENTER_L1D_FLUSH_NOT_REQUIRED; - return 0; - } - - if (!enable_ept) { - l1tf_vmx_mitigation = VMENTER_L1D_FLUSH_EPT_DISABLED; - return 0; - } - - if (boot_cpu_has(X86_FEATURE_ARCH_CAPABILITIES)) { - u64 msr; - - rdmsrl(MSR_IA32_ARCH_CAPABILITIES, msr); - if (msr & ARCH_CAP_SKIP_VMENTRY_L1DFLUSH) { - l1tf_vmx_mitigation = VMENTER_L1D_FLUSH_NOT_REQUIRED; - return 0; - } - } - - /* If set to auto use the default l1tf mitigation method */ - if (l1tf == VMENTER_L1D_FLUSH_AUTO) { - switch (l1tf_mitigation) { - case L1TF_MITIGATION_OFF: - l1tf = VMENTER_L1D_FLUSH_NEVER; - break; - case L1TF_MITIGATION_FLUSH_NOWARN: - case L1TF_MITIGATION_FLUSH: - case L1TF_MITIGATION_FLUSH_NOSMT: - l1tf = VMENTER_L1D_FLUSH_COND; - break; - case L1TF_MITIGATION_FULL: - case L1TF_MITIGATION_FULL_FORCE: - l1tf = VMENTER_L1D_FLUSH_ALWAYS; - break; - } - } else if (l1tf_mitigation == L1TF_MITIGATION_FULL_FORCE) { - l1tf = VMENTER_L1D_FLUSH_ALWAYS; - } - - if (l1tf != VMENTER_L1D_FLUSH_NEVER && !vmx_l1d_flush_pages && - !boot_cpu_has(X86_FEATURE_FLUSH_L1D)) { - /* - * This allocation for vmx_l1d_flush_pages is not tied to a VM - * lifetime and so should not be charged to a memcg. - */ - page = alloc_pages(GFP_KERNEL, L1D_CACHE_ORDER); - if (!page) - return -ENOMEM; - vmx_l1d_flush_pages = page_address(page); - - /* - * Initialize each page with a different pattern in - * order to protect against KSM in the nested - * virtualization case. - */ - for (i = 0; i < 1u << L1D_CACHE_ORDER; ++i) { - memset(vmx_l1d_flush_pages + i * PAGE_SIZE, i + 1, - PAGE_SIZE); - } - } - - l1tf_vmx_mitigation = l1tf; - - if (l1tf != VMENTER_L1D_FLUSH_NEVER) - static_branch_enable(&vmx_l1d_should_flush); - else - static_branch_disable(&vmx_l1d_should_flush); - - if (l1tf == VMENTER_L1D_FLUSH_COND) - static_branch_enable(&vmx_l1d_flush_cond); - else - static_branch_disable(&vmx_l1d_flush_cond); - return 0; -} - -static int vmentry_l1d_flush_parse(const char *s) -{ - unsigned int i; - - if (s) { - for (i = 0; i < ARRAY_SIZE(vmentry_l1d_param); i++) { - if (vmentry_l1d_param[i].for_parse && - sysfs_streq(s, vmentry_l1d_param[i].option)) - return i; - } - } - return -EINVAL; -} - -static int vmentry_l1d_flush_set(const char *s, const struct kernel_param *kp) -{ - int l1tf, ret; - - l1tf = vmentry_l1d_flush_parse(s); - if (l1tf < 0) - return l1tf; - - if (!boot_cpu_has(X86_BUG_L1TF)) - return 0; - - /* - * Has vmx_init() run already? If not then this is the pre init - * parameter parsing. In that case just store the value and let - * vmx_init() do the proper setup after enable_ept has been - * established. - */ - if (l1tf_vmx_mitigation == VMENTER_L1D_FLUSH_AUTO) { - vmentry_l1d_flush_param = l1tf; - return 0; - } - - mutex_lock(&vmx_l1d_flush_mutex); - ret = vmx_setup_l1d_flush(l1tf); - mutex_unlock(&vmx_l1d_flush_mutex); - return ret; -} - -static int vmentry_l1d_flush_get(char *s, const struct kernel_param *kp) -{ - if (WARN_ON_ONCE(l1tf_vmx_mitigation >= ARRAY_SIZE(vmentry_l1d_param))) - return sprintf(s, "???\n"); - - return sprintf(s, "%s\n", vmentry_l1d_param[l1tf_vmx_mitigation].option); -} - -static const struct kernel_param_ops vmentry_l1d_flush_ops = { - .set = vmentry_l1d_flush_set, - .get = vmentry_l1d_flush_get, -}; -module_param_cb(vmentry_l1d_flush, &vmentry_l1d_flush_ops, NULL, 0644); - -static bool guest_state_valid(struct kvm_vcpu *vcpu); -static u32 vmx_segment_access_rights(struct kvm_segment *var); -static __always_inline void vmx_disable_intercept_for_msr(unsigned long *msr_bitmap, - u32 msr, int type); - -void vmx_vmexit(void); - -#define vmx_insn_failed(fmt...) \ -do { \ - WARN_ONCE(1, fmt); \ - pr_warn_ratelimited(fmt); \ -} while (0) - -asmlinkage void vmread_error(unsigned long field, bool fault) -{ - if (fault) - kvm_spurious_fault(); - else - vmx_insn_failed("kvm: vmread failed: field=%lx\n", field); -} - -noinline void vmwrite_error(unsigned long field, unsigned long value) -{ - vmx_insn_failed("kvm: vmwrite failed: field=%lx val=%lx err=%d\n", - field, value, vmcs_read32(VM_INSTRUCTION_ERROR)); -} - -noinline void vmclear_error(struct vmcs *vmcs, u64 phys_addr) -{ - vmx_insn_failed("kvm: vmclear failed: %p/%llx\n", vmcs, phys_addr); -} - -noinline void vmptrld_error(struct vmcs *vmcs, u64 phys_addr) -{ - vmx_insn_failed("kvm: vmptrld failed: %p/%llx\n", vmcs, phys_addr); -} - -noinline void invvpid_error(unsigned long ext, u16 vpid, gva_t gva) -{ - vmx_insn_failed("kvm: invvpid failed: ext=0x%lx vpid=%u gva=0x%lx\n", - ext, vpid, gva); -} - -noinline void invept_error(unsigned long ext, u64 eptp, gpa_t gpa) -{ - vmx_insn_failed("kvm: invept failed: ext=0x%lx eptp=%llx gpa=0x%llx\n", - ext, eptp, gpa); -} - -static DEFINE_PER_CPU(struct vmcs *, vmxarea); -DEFINE_PER_CPU(struct vmcs *, current_vmcs); -/* - * We maintain a per-CPU linked-list of VMCS loaded on that CPU. This is needed - * when a CPU is brought down, and we need to VMCLEAR all VMCSs loaded on it. - */ -static DEFINE_PER_CPU(struct list_head, loaded_vmcss_on_cpu); - -/* - * We maintian a per-CPU linked-list of vCPU, so in wakeup_handler() we - * can find which vCPU should be waken up. - */ -static DEFINE_PER_CPU(struct list_head, blocked_vcpu_on_cpu); -static DEFINE_PER_CPU(spinlock_t, blocked_vcpu_on_cpu_lock); - -static DECLARE_BITMAP(vmx_vpid_bitmap, VMX_NR_VPIDS); -static DEFINE_SPINLOCK(vmx_vpid_lock); - -struct vmcs_config vmcs_config; -struct vmx_capability vmx_capability; - -#define VMX_SEGMENT_FIELD(seg) \ - [VCPU_SREG_##seg] = { \ - .selector = GUEST_##seg##_SELECTOR, \ - .base = GUEST_##seg##_BASE, \ - .limit = GUEST_##seg##_LIMIT, \ - .ar_bytes = GUEST_##seg##_AR_BYTES, \ - } - -static const struct kvm_vmx_segment_field { - unsigned selector; - unsigned base; - unsigned limit; - unsigned ar_bytes; -} kvm_vmx_segment_fields[] = { - VMX_SEGMENT_FIELD(CS), - VMX_SEGMENT_FIELD(DS), - VMX_SEGMENT_FIELD(ES), - VMX_SEGMENT_FIELD(FS), - VMX_SEGMENT_FIELD(GS), - VMX_SEGMENT_FIELD(SS), - VMX_SEGMENT_FIELD(TR), - VMX_SEGMENT_FIELD(LDTR), -}; - -u64 host_efer; -static unsigned long host_idt_base; - -/* - * Though SYSCALL is only supported in 64-bit mode on Intel CPUs, kvm - * will emulate SYSCALL in legacy mode if the vendor string in guest - * CPUID.0:{EBX,ECX,EDX} is "AuthenticAMD" or "AMDisbetter!" To - * support this emulation, IA32_STAR must always be included in - * vmx_msr_index[], even in i386 builds. - */ -const u32 vmx_msr_index[] = { -#ifdef CONFIG_X86_64 - MSR_SYSCALL_MASK, MSR_LSTAR, MSR_CSTAR, -#endif - MSR_EFER, MSR_TSC_AUX, MSR_STAR, - MSR_IA32_TSX_CTRL, -}; - -#if IS_ENABLED(CONFIG_HYPERV) -static bool __read_mostly enlightened_vmcs = true; -module_param(enlightened_vmcs, bool, 0444); - -/* check_ept_pointer() should be under protection of ept_pointer_lock. */ -static void check_ept_pointer_match(struct kvm *kvm) -{ - struct kvm_vcpu *vcpu; - u64 tmp_eptp = INVALID_PAGE; - int i; - - kvm_for_each_vcpu(i, vcpu, kvm) { - if (!VALID_PAGE(tmp_eptp)) { - tmp_eptp = to_vmx(vcpu)->ept_pointer; - } else if (tmp_eptp != to_vmx(vcpu)->ept_pointer) { - to_kvm_vmx(kvm)->ept_pointers_match - = EPT_POINTERS_MISMATCH; - return; - } - } - - to_kvm_vmx(kvm)->ept_pointers_match = EPT_POINTERS_MATCH; -} - -static int kvm_fill_hv_flush_list_func(struct hv_guest_mapping_flush_list *flush, - void *data) -{ - struct kvm_tlb_range *range = data; - - return hyperv_fill_flush_guest_mapping_list(flush, range->start_gfn, - range->pages); -} - -static inline int __hv_remote_flush_tlb_with_range(struct kvm *kvm, - struct kvm_vcpu *vcpu, struct kvm_tlb_range *range) -{ - u64 ept_pointer = to_vmx(vcpu)->ept_pointer; - - /* - * FLUSH_GUEST_PHYSICAL_ADDRESS_SPACE hypercall needs address - * of the base of EPT PML4 table, strip off EPT configuration - * information. - */ - if (range) - return hyperv_flush_guest_mapping_range(ept_pointer & PAGE_MASK, - kvm_fill_hv_flush_list_func, (void *)range); - else - return hyperv_flush_guest_mapping(ept_pointer & PAGE_MASK); -} - -static int hv_remote_flush_tlb_with_range(struct kvm *kvm, - struct kvm_tlb_range *range) -{ - struct kvm_vcpu *vcpu; - int ret = 0, i; - - spin_lock(&to_kvm_vmx(kvm)->ept_pointer_lock); - - if (to_kvm_vmx(kvm)->ept_pointers_match == EPT_POINTERS_CHECK) - check_ept_pointer_match(kvm); - - if (to_kvm_vmx(kvm)->ept_pointers_match != EPT_POINTERS_MATCH) { - kvm_for_each_vcpu(i, vcpu, kvm) { - /* If ept_pointer is invalid pointer, bypass flush request. */ - if (VALID_PAGE(to_vmx(vcpu)->ept_pointer)) - ret |= __hv_remote_flush_tlb_with_range( - kvm, vcpu, range); - } - } else { - ret = __hv_remote_flush_tlb_with_range(kvm, - kvm_get_vcpu(kvm, 0), range); - } - - spin_unlock(&to_kvm_vmx(kvm)->ept_pointer_lock); - return ret; -} -static int hv_remote_flush_tlb(struct kvm *kvm) -{ - return hv_remote_flush_tlb_with_range(kvm, NULL); -} - -static int hv_enable_direct_tlbflush(struct kvm_vcpu *vcpu) -{ - struct hv_enlightened_vmcs *evmcs; - struct hv_partition_assist_pg **p_hv_pa_pg = - &vcpu->kvm->arch.hyperv.hv_pa_pg; - /* - * Synthetic VM-Exit is not enabled in current code and so All - * evmcs in singe VM shares same assist page. - */ - if (!*p_hv_pa_pg) - *p_hv_pa_pg = kzalloc(PAGE_SIZE, GFP_KERNEL); - - if (!*p_hv_pa_pg) - return -ENOMEM; - - evmcs = (struct hv_enlightened_vmcs *)to_vmx(vcpu)->loaded_vmcs->vmcs; - - evmcs->partition_assist_page = - __pa(*p_hv_pa_pg); - evmcs->hv_vm_id = (unsigned long)vcpu->kvm; - evmcs->hv_enlightenments_control.nested_flush_hypercall = 1; - - return 0; -} - -#endif /* IS_ENABLED(CONFIG_HYPERV) */ - -/* - * Comment's format: document - errata name - stepping - processor name. - * Refer from - * https://www.virtualbox.org/svn/vbox/trunk/src/VBox/VMM/VMMR0/HMR0.cpp - */ -static u32 vmx_preemption_cpu_tfms[] = { -/* 323344.pdf - BA86 - D0 - Xeon 7500 Series */ -0x000206E6, -/* 323056.pdf - AAX65 - C2 - Xeon L3406 */ -/* 322814.pdf - AAT59 - C2 - i7-600, i5-500, i5-400 and i3-300 Mobile */ -/* 322911.pdf - AAU65 - C2 - i5-600, i3-500 Desktop and Pentium G6950 */ -0x00020652, -/* 322911.pdf - AAU65 - K0 - i5-600, i3-500 Desktop and Pentium G6950 */ -0x00020655, -/* 322373.pdf - AAO95 - B1 - Xeon 3400 Series */ -/* 322166.pdf - AAN92 - B1 - i7-800 and i5-700 Desktop */ -/* - * 320767.pdf - AAP86 - B1 - - * i7-900 Mobile Extreme, i7-800 and i7-700 Mobile - */ -0x000106E5, -/* 321333.pdf - AAM126 - C0 - Xeon 3500 */ -0x000106A0, -/* 321333.pdf - AAM126 - C1 - Xeon 3500 */ -0x000106A1, -/* 320836.pdf - AAJ124 - C0 - i7-900 Desktop Extreme and i7-900 Desktop */ -0x000106A4, - /* 321333.pdf - AAM126 - D0 - Xeon 3500 */ - /* 321324.pdf - AAK139 - D0 - Xeon 5500 */ - /* 320836.pdf - AAJ124 - D0 - i7-900 Extreme and i7-900 Desktop */ -0x000106A5, - /* Xeon E3-1220 V2 */ -0x000306A8, -}; - -static inline bool cpu_has_broken_vmx_preemption_timer(void) -{ - u32 eax = cpuid_eax(0x00000001), i; - - /* Clear the reserved bits */ - eax &= ~(0x3U << 14 | 0xfU << 28); - for (i = 0; i < ARRAY_SIZE(vmx_preemption_cpu_tfms); i++) - if (eax == vmx_preemption_cpu_tfms[i]) - return true; - - return false; -} - -static inline bool cpu_need_virtualize_apic_accesses(struct kvm_vcpu *vcpu) -{ - return flexpriority_enabled && lapic_in_kernel(vcpu); -} - -static inline bool report_flexpriority(void) -{ - return flexpriority_enabled; -} - -static inline int __find_msr_index(struct vcpu_vmx *vmx, u32 msr) -{ - int i; - - for (i = 0; i < vmx->nmsrs; ++i) - if (vmx_msr_index[vmx->guest_msrs[i].index] == msr) - return i; - return -1; -} - -struct shared_msr_entry *find_msr_entry(struct vcpu_vmx *vmx, u32 msr) -{ - int i; - - i = __find_msr_index(vmx, msr); - if (i >= 0) - return &vmx->guest_msrs[i]; - return NULL; -} - -static int vmx_set_guest_msr(struct vcpu_vmx *vmx, struct shared_msr_entry *msr, u64 data) -{ - int ret = 0; - - u64 old_msr_data = msr->data; - msr->data = data; - if (msr - vmx->guest_msrs < vmx->save_nmsrs) { - preempt_disable(); - ret = kvm_set_shared_msr(msr->index, msr->data, - msr->mask); - preempt_enable(); - if (ret) - msr->data = old_msr_data; - } - return ret; -} - -void loaded_vmcs_init(struct loaded_vmcs *loaded_vmcs) -{ - vmcs_clear(loaded_vmcs->vmcs); - if (loaded_vmcs->shadow_vmcs && loaded_vmcs->launched) - vmcs_clear(loaded_vmcs->shadow_vmcs); - loaded_vmcs->cpu = -1; - loaded_vmcs->launched = 0; -} - -#ifdef CONFIG_KEXEC_CORE -/* - * This bitmap is used to indicate whether the vmclear - * operation is enabled on all cpus. All disabled by - * default. - */ -static cpumask_t crash_vmclear_enabled_bitmap = CPU_MASK_NONE; - -static inline void crash_enable_local_vmclear(int cpu) -{ - cpumask_set_cpu(cpu, &crash_vmclear_enabled_bitmap); -} - -static inline void crash_disable_local_vmclear(int cpu) -{ - cpumask_clear_cpu(cpu, &crash_vmclear_enabled_bitmap); -} - -static inline int crash_local_vmclear_enabled(int cpu) -{ - return cpumask_test_cpu(cpu, &crash_vmclear_enabled_bitmap); -} - -static void crash_vmclear_local_loaded_vmcss(void) -{ - int cpu = raw_smp_processor_id(); - struct loaded_vmcs *v; - - if (!crash_local_vmclear_enabled(cpu)) - return; - - list_for_each_entry(v, &per_cpu(loaded_vmcss_on_cpu, cpu), - loaded_vmcss_on_cpu_link) - vmcs_clear(v->vmcs); -} -#else -static inline void crash_enable_local_vmclear(int cpu) { } -static inline void crash_disable_local_vmclear(int cpu) { } -#endif /* CONFIG_KEXEC_CORE */ - -static void __loaded_vmcs_clear(void *arg) -{ - struct loaded_vmcs *loaded_vmcs = arg; - int cpu = raw_smp_processor_id(); - - if (loaded_vmcs->cpu != cpu) - return; /* vcpu migration can race with cpu offline */ - if (per_cpu(current_vmcs, cpu) == loaded_vmcs->vmcs) - per_cpu(current_vmcs, cpu) = NULL; - crash_disable_local_vmclear(cpu); - list_del(&loaded_vmcs->loaded_vmcss_on_cpu_link); - - /* - * we should ensure updating loaded_vmcs->loaded_vmcss_on_cpu_link - * is before setting loaded_vmcs->vcpu to -1 which is done in - * loaded_vmcs_init. Otherwise, other cpu can see vcpu = -1 fist - * then adds the vmcs into percpu list before it is deleted. - */ - smp_wmb(); - - loaded_vmcs_init(loaded_vmcs); - crash_enable_local_vmclear(cpu); -} - -void loaded_vmcs_clear(struct loaded_vmcs *loaded_vmcs) -{ - int cpu = loaded_vmcs->cpu; - - if (cpu != -1) - smp_call_function_single(cpu, - __loaded_vmcs_clear, loaded_vmcs, 1); -} - -static bool vmx_segment_cache_test_set(struct vcpu_vmx *vmx, unsigned seg, - unsigned field) -{ - bool ret; - u32 mask = 1 << (seg * SEG_FIELD_NR + field); - - if (!kvm_register_is_available(&vmx->vcpu, VCPU_EXREG_SEGMENTS)) { - kvm_register_mark_available(&vmx->vcpu, VCPU_EXREG_SEGMENTS); - vmx->segment_cache.bitmask = 0; - } - ret = vmx->segment_cache.bitmask & mask; - vmx->segment_cache.bitmask |= mask; - return ret; -} - -static u16 vmx_read_guest_seg_selector(struct vcpu_vmx *vmx, unsigned seg) -{ - u16 *p = &vmx->segment_cache.seg[seg].selector; - - if (!vmx_segment_cache_test_set(vmx, seg, SEG_FIELD_SEL)) - *p = vmcs_read16(kvm_vmx_segment_fields[seg].selector); - return *p; -} - -static ulong vmx_read_guest_seg_base(struct vcpu_vmx *vmx, unsigned seg) -{ - ulong *p = &vmx->segment_cache.seg[seg].base; - - if (!vmx_segment_cache_test_set(vmx, seg, SEG_FIELD_BASE)) - *p = vmcs_readl(kvm_vmx_segment_fields[seg].base); - return *p; -} - -static u32 vmx_read_guest_seg_limit(struct vcpu_vmx *vmx, unsigned seg) -{ - u32 *p = &vmx->segment_cache.seg[seg].limit; - - if (!vmx_segment_cache_test_set(vmx, seg, SEG_FIELD_LIMIT)) - *p = vmcs_read32(kvm_vmx_segment_fields[seg].limit); - return *p; -} - -static u32 vmx_read_guest_seg_ar(struct vcpu_vmx *vmx, unsigned seg) -{ - u32 *p = &vmx->segment_cache.seg[seg].ar; - - if (!vmx_segment_cache_test_set(vmx, seg, SEG_FIELD_AR)) - *p = vmcs_read32(kvm_vmx_segment_fields[seg].ar_bytes); - return *p; -} - -void update_exception_bitmap(struct kvm_vcpu *vcpu) -{ - u32 eb; - - eb = (1u << PF_VECTOR) | (1u << UD_VECTOR) | (1u << MC_VECTOR) | - (1u << DB_VECTOR) | (1u << AC_VECTOR); - /* - * Guest access to VMware backdoor ports could legitimately - * trigger #GP because of TSS I/O permission bitmap. - * We intercept those #GP and allow access to them anyway - * as VMware does. - */ - if (enable_vmware_backdoor) - eb |= (1u << GP_VECTOR); - if ((vcpu->guest_debug & - (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP)) == - (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP)) - eb |= 1u << BP_VECTOR; - if (to_vmx(vcpu)->rmode.vm86_active) - eb = ~0; - if (enable_ept) - eb &= ~(1u << PF_VECTOR); /* bypass_guest_pf = 0 */ - - /* When we are running a nested L2 guest and L1 specified for it a - * certain exception bitmap, we must trap the same exceptions and pass - * them to L1. When running L2, we will only handle the exceptions - * specified above if L1 did not want them. - */ - if (is_guest_mode(vcpu)) - eb |= get_vmcs12(vcpu)->exception_bitmap; - - vmcs_write32(EXCEPTION_BITMAP, eb); -} - -/* - * Check if MSR is intercepted for currently loaded MSR bitmap. - */ -static bool msr_write_intercepted(struct kvm_vcpu *vcpu, u32 msr) -{ - unsigned long *msr_bitmap; - int f = sizeof(unsigned long); - - if (!cpu_has_vmx_msr_bitmap()) - return true; - - msr_bitmap = to_vmx(vcpu)->loaded_vmcs->msr_bitmap; - - if (msr <= 0x1fff) { - return !!test_bit(msr, msr_bitmap + 0x800 / f); - } else if ((msr >= 0xc0000000) && (msr <= 0xc0001fff)) { - msr &= 0x1fff; - return !!test_bit(msr, msr_bitmap + 0xc00 / f); - } - - return true; -} - -static void clear_atomic_switch_msr_special(struct vcpu_vmx *vmx, - unsigned long entry, unsigned long exit) -{ - vm_entry_controls_clearbit(vmx, entry); - vm_exit_controls_clearbit(vmx, exit); -} - -int vmx_find_msr_index(struct vmx_msrs *m, u32 msr) -{ - unsigned int i; - - for (i = 0; i < m->nr; ++i) { - if (m->val[i].index == msr) - return i; - } - return -ENOENT; -} - -static void clear_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr) -{ - int i; - struct msr_autoload *m = &vmx->msr_autoload; - - switch (msr) { - case MSR_EFER: - if (cpu_has_load_ia32_efer()) { - clear_atomic_switch_msr_special(vmx, - VM_ENTRY_LOAD_IA32_EFER, - VM_EXIT_LOAD_IA32_EFER); - return; - } - break; - case MSR_CORE_PERF_GLOBAL_CTRL: - if (cpu_has_load_perf_global_ctrl()) { - clear_atomic_switch_msr_special(vmx, - VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL, - VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL); - return; - } - break; - } - i = vmx_find_msr_index(&m->guest, msr); - if (i < 0) - goto skip_guest; - --m->guest.nr; - m->guest.val[i] = m->guest.val[m->guest.nr]; - vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, m->guest.nr); - -skip_guest: - i = vmx_find_msr_index(&m->host, msr); - if (i < 0) - return; - - --m->host.nr; - m->host.val[i] = m->host.val[m->host.nr]; - vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->host.nr); -} - -static void add_atomic_switch_msr_special(struct vcpu_vmx *vmx, - unsigned long entry, unsigned long exit, - unsigned long guest_val_vmcs, unsigned long host_val_vmcs, - u64 guest_val, u64 host_val) -{ - vmcs_write64(guest_val_vmcs, guest_val); - if (host_val_vmcs != HOST_IA32_EFER) - vmcs_write64(host_val_vmcs, host_val); - vm_entry_controls_setbit(vmx, entry); - vm_exit_controls_setbit(vmx, exit); -} - -static void add_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr, - u64 guest_val, u64 host_val, bool entry_only) -{ - int i, j = 0; - struct msr_autoload *m = &vmx->msr_autoload; - - switch (msr) { - case MSR_EFER: - if (cpu_has_load_ia32_efer()) { - add_atomic_switch_msr_special(vmx, - VM_ENTRY_LOAD_IA32_EFER, - VM_EXIT_LOAD_IA32_EFER, - GUEST_IA32_EFER, - HOST_IA32_EFER, - guest_val, host_val); - return; - } - break; - case MSR_CORE_PERF_GLOBAL_CTRL: - if (cpu_has_load_perf_global_ctrl()) { - add_atomic_switch_msr_special(vmx, - VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL, - VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL, - GUEST_IA32_PERF_GLOBAL_CTRL, - HOST_IA32_PERF_GLOBAL_CTRL, - guest_val, host_val); - return; - } - break; - case MSR_IA32_PEBS_ENABLE: - /* PEBS needs a quiescent period after being disabled (to write - * a record). Disabling PEBS through VMX MSR swapping doesn't - * provide that period, so a CPU could write host's record into - * guest's memory. - */ - wrmsrl(MSR_IA32_PEBS_ENABLE, 0); - } - - i = vmx_find_msr_index(&m->guest, msr); - if (!entry_only) - j = vmx_find_msr_index(&m->host, msr); - - if ((i < 0 && m->guest.nr == NR_LOADSTORE_MSRS) || - (j < 0 && m->host.nr == NR_LOADSTORE_MSRS)) { - printk_once(KERN_WARNING "Not enough msr switch entries. " - "Can't add msr %x\n", msr); - return; - } - if (i < 0) { - i = m->guest.nr++; - vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, m->guest.nr); - } - m->guest.val[i].index = msr; - m->guest.val[i].value = guest_val; - - if (entry_only) - return; - - if (j < 0) { - j = m->host.nr++; - vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->host.nr); - } - m->host.val[j].index = msr; - m->host.val[j].value = host_val; -} - -static bool update_transition_efer(struct vcpu_vmx *vmx, int efer_offset) -{ - u64 guest_efer = vmx->vcpu.arch.efer; - u64 ignore_bits = 0; - - /* Shadow paging assumes NX to be available. */ - if (!enable_ept) - guest_efer |= EFER_NX; - - /* - * LMA and LME handled by hardware; SCE meaningless outside long mode. - */ - ignore_bits |= EFER_SCE; -#ifdef CONFIG_X86_64 - ignore_bits |= EFER_LMA | EFER_LME; - /* SCE is meaningful only in long mode on Intel */ - if (guest_efer & EFER_LMA) - ignore_bits &= ~(u64)EFER_SCE; -#endif - - /* - * On EPT, we can't emulate NX, so we must switch EFER atomically. - * On CPUs that support "load IA32_EFER", always switch EFER - * atomically, since it's faster than switching it manually. - */ - if (cpu_has_load_ia32_efer() || - (enable_ept && ((vmx->vcpu.arch.efer ^ host_efer) & EFER_NX))) { - if (!(guest_efer & EFER_LMA)) - guest_efer &= ~EFER_LME; - if (guest_efer != host_efer) - add_atomic_switch_msr(vmx, MSR_EFER, - guest_efer, host_efer, false); - else - clear_atomic_switch_msr(vmx, MSR_EFER); - return false; - } else { - clear_atomic_switch_msr(vmx, MSR_EFER); - - guest_efer &= ~ignore_bits; - guest_efer |= host_efer & ignore_bits; - - vmx->guest_msrs[efer_offset].data = guest_efer; - vmx->guest_msrs[efer_offset].mask = ~ignore_bits; - - return true; - } -} - -#ifdef CONFIG_X86_32 -/* - * On 32-bit kernels, VM exits still load the FS and GS bases from the - * VMCS rather than the segment table. KVM uses this helper to figure - * out the current bases to poke them into the VMCS before entry. - */ -static unsigned long segment_base(u16 selector) -{ - struct desc_struct *table; - unsigned long v; - - if (!(selector & ~SEGMENT_RPL_MASK)) - return 0; - - table = get_current_gdt_ro(); - - if ((selector & SEGMENT_TI_MASK) == SEGMENT_LDT) { - u16 ldt_selector = kvm_read_ldt(); - - if (!(ldt_selector & ~SEGMENT_RPL_MASK)) - return 0; - - table = (struct desc_struct *)segment_base(ldt_selector); - } - v = get_desc_base(&table[selector >> 3]); - return v; -} -#endif - -static inline void pt_load_msr(struct pt_ctx *ctx, u32 addr_range) -{ - u32 i; - - wrmsrl(MSR_IA32_RTIT_STATUS, ctx->status); - wrmsrl(MSR_IA32_RTIT_OUTPUT_BASE, ctx->output_base); - wrmsrl(MSR_IA32_RTIT_OUTPUT_MASK, ctx->output_mask); - wrmsrl(MSR_IA32_RTIT_CR3_MATCH, ctx->cr3_match); - for (i = 0; i < addr_range; i++) { - wrmsrl(MSR_IA32_RTIT_ADDR0_A + i * 2, ctx->addr_a[i]); - wrmsrl(MSR_IA32_RTIT_ADDR0_B + i * 2, ctx->addr_b[i]); - } -} - -static inline void pt_save_msr(struct pt_ctx *ctx, u32 addr_range) -{ - u32 i; - - rdmsrl(MSR_IA32_RTIT_STATUS, ctx->status); - rdmsrl(MSR_IA32_RTIT_OUTPUT_BASE, ctx->output_base); - rdmsrl(MSR_IA32_RTIT_OUTPUT_MASK, ctx->output_mask); - rdmsrl(MSR_IA32_RTIT_CR3_MATCH, ctx->cr3_match); - for (i = 0; i < addr_range; i++) { - rdmsrl(MSR_IA32_RTIT_ADDR0_A + i * 2, ctx->addr_a[i]); - rdmsrl(MSR_IA32_RTIT_ADDR0_B + i * 2, ctx->addr_b[i]); - } -} - -static void pt_guest_enter(struct vcpu_vmx *vmx) -{ - if (pt_mode == PT_MODE_SYSTEM) - return; - - /* - * GUEST_IA32_RTIT_CTL is already set in the VMCS. - * Save host state before VM entry. - */ - rdmsrl(MSR_IA32_RTIT_CTL, vmx->pt_desc.host.ctl); - if (vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) { - wrmsrl(MSR_IA32_RTIT_CTL, 0); - pt_save_msr(&vmx->pt_desc.host, vmx->pt_desc.addr_range); - pt_load_msr(&vmx->pt_desc.guest, vmx->pt_desc.addr_range); - } -} - -static void pt_guest_exit(struct vcpu_vmx *vmx) -{ - if (pt_mode == PT_MODE_SYSTEM) - return; - - if (vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) { - pt_save_msr(&vmx->pt_desc.guest, vmx->pt_desc.addr_range); - pt_load_msr(&vmx->pt_desc.host, vmx->pt_desc.addr_range); - } - - /* Reload host state (IA32_RTIT_CTL will be cleared on VM exit). */ - wrmsrl(MSR_IA32_RTIT_CTL, vmx->pt_desc.host.ctl); -} - -void vmx_set_host_fs_gs(struct vmcs_host_state *host, u16 fs_sel, u16 gs_sel, - unsigned long fs_base, unsigned long gs_base) -{ - if (unlikely(fs_sel != host->fs_sel)) { - if (!(fs_sel & 7)) - vmcs_write16(HOST_FS_SELECTOR, fs_sel); - else - vmcs_write16(HOST_FS_SELECTOR, 0); - host->fs_sel = fs_sel; - } - if (unlikely(gs_sel != host->gs_sel)) { - if (!(gs_sel & 7)) - vmcs_write16(HOST_GS_SELECTOR, gs_sel); - else - vmcs_write16(HOST_GS_SELECTOR, 0); - host->gs_sel = gs_sel; - } - if (unlikely(fs_base != host->fs_base)) { - vmcs_writel(HOST_FS_BASE, fs_base); - host->fs_base = fs_base; - } - if (unlikely(gs_base != host->gs_base)) { - vmcs_writel(HOST_GS_BASE, gs_base); - host->gs_base = gs_base; - } -} - -void vmx_prepare_switch_to_guest(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - struct vmcs_host_state *host_state; -#ifdef CONFIG_X86_64 - int cpu = raw_smp_processor_id(); -#endif - unsigned long fs_base, gs_base; - u16 fs_sel, gs_sel; - int i; - - vmx->req_immediate_exit = false; - - /* - * Note that guest MSRs to be saved/restored can also be changed - * when guest state is loaded. This happens when guest transitions - * to/from long-mode by setting MSR_EFER.LMA. - */ - if (!vmx->guest_msrs_ready) { - vmx->guest_msrs_ready = true; - for (i = 0; i < vmx->save_nmsrs; ++i) - kvm_set_shared_msr(vmx->guest_msrs[i].index, - vmx->guest_msrs[i].data, - vmx->guest_msrs[i].mask); - - } - if (vmx->guest_state_loaded) - return; - - host_state = &vmx->loaded_vmcs->host_state; - - /* - * Set host fs and gs selectors. Unfortunately, 22.2.3 does not - * allow segment selectors with cpl > 0 or ti == 1. - */ - host_state->ldt_sel = kvm_read_ldt(); - -#ifdef CONFIG_X86_64 - savesegment(ds, host_state->ds_sel); - savesegment(es, host_state->es_sel); - - gs_base = cpu_kernelmode_gs_base(cpu); - if (likely(is_64bit_mm(current->mm))) { - save_fsgs_for_kvm(); - fs_sel = current->thread.fsindex; - gs_sel = current->thread.gsindex; - fs_base = current->thread.fsbase; - vmx->msr_host_kernel_gs_base = current->thread.gsbase; - } else { - savesegment(fs, fs_sel); - savesegment(gs, gs_sel); - fs_base = read_msr(MSR_FS_BASE); - vmx->msr_host_kernel_gs_base = read_msr(MSR_KERNEL_GS_BASE); - } - - wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base); -#else - savesegment(fs, fs_sel); - savesegment(gs, gs_sel); - fs_base = segment_base(fs_sel); - gs_base = segment_base(gs_sel); -#endif - - vmx_set_host_fs_gs(host_state, fs_sel, gs_sel, fs_base, gs_base); - vmx->guest_state_loaded = true; -} - -static void vmx_prepare_switch_to_host(struct vcpu_vmx *vmx) -{ - struct vmcs_host_state *host_state; - - if (!vmx->guest_state_loaded) - return; - - host_state = &vmx->loaded_vmcs->host_state; - - ++vmx->vcpu.stat.host_state_reload; - -#ifdef CONFIG_X86_64 - rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base); -#endif - if (host_state->ldt_sel || (host_state->gs_sel & 7)) { - kvm_load_ldt(host_state->ldt_sel); -#ifdef CONFIG_X86_64 - load_gs_index(host_state->gs_sel); -#else - loadsegment(gs, host_state->gs_sel); -#endif - } - if (host_state->fs_sel & 7) - loadsegment(fs, host_state->fs_sel); -#ifdef CONFIG_X86_64 - if (unlikely(host_state->ds_sel | host_state->es_sel)) { - loadsegment(ds, host_state->ds_sel); - loadsegment(es, host_state->es_sel); - } -#endif - invalidate_tss_limit(); -#ifdef CONFIG_X86_64 - wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base); -#endif - load_fixmap_gdt(raw_smp_processor_id()); - vmx->guest_state_loaded = false; - vmx->guest_msrs_ready = false; -} - -#ifdef CONFIG_X86_64 -static u64 vmx_read_guest_kernel_gs_base(struct vcpu_vmx *vmx) -{ - preempt_disable(); - if (vmx->guest_state_loaded) - rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base); - preempt_enable(); - return vmx->msr_guest_kernel_gs_base; -} - -static void vmx_write_guest_kernel_gs_base(struct vcpu_vmx *vmx, u64 data) -{ - preempt_disable(); - if (vmx->guest_state_loaded) - wrmsrl(MSR_KERNEL_GS_BASE, data); - preempt_enable(); - vmx->msr_guest_kernel_gs_base = data; -} -#endif - -static void vmx_vcpu_pi_load(struct kvm_vcpu *vcpu, int cpu) -{ - struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu); - struct pi_desc old, new; - unsigned int dest; - - /* - * In case of hot-plug or hot-unplug, we may have to undo - * vmx_vcpu_pi_put even if there is no assigned device. And we - * always keep PI.NDST up to date for simplicity: it makes the - * code easier, and CPU migration is not a fast path. - */ - if (!pi_test_sn(pi_desc) && vcpu->cpu == cpu) - return; - - /* - * If the 'nv' field is POSTED_INTR_WAKEUP_VECTOR, do not change - * PI.NDST: pi_post_block is the one expected to change PID.NDST and the - * wakeup handler expects the vCPU to be on the blocked_vcpu_list that - * matches PI.NDST. Otherwise, a vcpu may not be able to be woken up - * correctly. - */ - if (pi_desc->nv == POSTED_INTR_WAKEUP_VECTOR || vcpu->cpu == cpu) { - pi_clear_sn(pi_desc); - goto after_clear_sn; - } - - /* The full case. */ - do { - old.control = new.control = pi_desc->control; - - dest = cpu_physical_id(cpu); - - if (x2apic_enabled()) - new.ndst = dest; - else - new.ndst = (dest << 8) & 0xFF00; - - new.sn = 0; - } while (cmpxchg64(&pi_desc->control, old.control, - new.control) != old.control); - -after_clear_sn: - - /* - * Clear SN before reading the bitmap. The VT-d firmware - * writes the bitmap and reads SN atomically (5.2.3 in the - * spec), so it doesn't really have a memory barrier that - * pairs with this, but we cannot do that and we need one. - */ - smp_mb__after_atomic(); - - if (!pi_is_pir_empty(pi_desc)) - pi_set_on(pi_desc); -} - -void vmx_vcpu_load_vmcs(struct kvm_vcpu *vcpu, int cpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - bool already_loaded = vmx->loaded_vmcs->cpu == cpu; - - if (!already_loaded) { - loaded_vmcs_clear(vmx->loaded_vmcs); - local_irq_disable(); - crash_disable_local_vmclear(cpu); - - /* - * Read loaded_vmcs->cpu should be before fetching - * loaded_vmcs->loaded_vmcss_on_cpu_link. - * See the comments in __loaded_vmcs_clear(). - */ - smp_rmb(); - - list_add(&vmx->loaded_vmcs->loaded_vmcss_on_cpu_link, - &per_cpu(loaded_vmcss_on_cpu, cpu)); - crash_enable_local_vmclear(cpu); - local_irq_enable(); - } - - if (per_cpu(current_vmcs, cpu) != vmx->loaded_vmcs->vmcs) { - per_cpu(current_vmcs, cpu) = vmx->loaded_vmcs->vmcs; - vmcs_load(vmx->loaded_vmcs->vmcs); - indirect_branch_prediction_barrier(); - } - - if (!already_loaded) { - void *gdt = get_current_gdt_ro(); - unsigned long sysenter_esp; - - kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu); - - /* - * Linux uses per-cpu TSS and GDT, so set these when switching - * processors. See 22.2.4. - */ - vmcs_writel(HOST_TR_BASE, - (unsigned long)&get_cpu_entry_area(cpu)->tss.x86_tss); - vmcs_writel(HOST_GDTR_BASE, (unsigned long)gdt); /* 22.2.4 */ - - rdmsrl(MSR_IA32_SYSENTER_ESP, sysenter_esp); - vmcs_writel(HOST_IA32_SYSENTER_ESP, sysenter_esp); /* 22.2.3 */ - - vmx->loaded_vmcs->cpu = cpu; - } - - /* Setup TSC multiplier */ - if (kvm_has_tsc_control && - vmx->current_tsc_ratio != vcpu->arch.tsc_scaling_ratio) - decache_tsc_multiplier(vmx); -} - -/* - * Switches to specified vcpu, until a matching vcpu_put(), but assumes - * vcpu mutex is already taken. - */ -void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - - vmx_vcpu_load_vmcs(vcpu, cpu); - - vmx_vcpu_pi_load(vcpu, cpu); - - vmx->host_pkru = read_pkru(); - vmx->host_debugctlmsr = get_debugctlmsr(); -} - -static void vmx_vcpu_pi_put(struct kvm_vcpu *vcpu) -{ - struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu); - - if (!kvm_arch_has_assigned_device(vcpu->kvm) || - !irq_remapping_cap(IRQ_POSTING_CAP) || - !kvm_vcpu_apicv_active(vcpu)) - return; - - /* Set SN when the vCPU is preempted */ - if (vcpu->preempted) - pi_set_sn(pi_desc); -} - -static void vmx_vcpu_put(struct kvm_vcpu *vcpu) -{ - vmx_vcpu_pi_put(vcpu); - - vmx_prepare_switch_to_host(to_vmx(vcpu)); -} - -static bool emulation_required(struct kvm_vcpu *vcpu) -{ - return emulate_invalid_guest_state && !guest_state_valid(vcpu); -} - -static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu); - -unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - unsigned long rflags, save_rflags; - - if (!kvm_register_is_available(vcpu, VCPU_EXREG_RFLAGS)) { - kvm_register_mark_available(vcpu, VCPU_EXREG_RFLAGS); - rflags = vmcs_readl(GUEST_RFLAGS); - if (vmx->rmode.vm86_active) { - rflags &= RMODE_GUEST_OWNED_EFLAGS_BITS; - save_rflags = vmx->rmode.save_rflags; - rflags |= save_rflags & ~RMODE_GUEST_OWNED_EFLAGS_BITS; - } - vmx->rflags = rflags; - } - return vmx->rflags; -} - -void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - unsigned long old_rflags; - - if (enable_unrestricted_guest) { - kvm_register_mark_available(vcpu, VCPU_EXREG_RFLAGS); - vmx->rflags = rflags; - vmcs_writel(GUEST_RFLAGS, rflags); - return; - } - - old_rflags = vmx_get_rflags(vcpu); - vmx->rflags = rflags; - if (vmx->rmode.vm86_active) { - vmx->rmode.save_rflags = rflags; - rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM; - } - vmcs_writel(GUEST_RFLAGS, rflags); - - if ((old_rflags ^ vmx->rflags) & X86_EFLAGS_VM) - vmx->emulation_required = emulation_required(vcpu); -} - -u32 vmx_get_interrupt_shadow(struct kvm_vcpu *vcpu) -{ - u32 interruptibility = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO); - int ret = 0; - - if (interruptibility & GUEST_INTR_STATE_STI) - ret |= KVM_X86_SHADOW_INT_STI; - if (interruptibility & GUEST_INTR_STATE_MOV_SS) - ret |= KVM_X86_SHADOW_INT_MOV_SS; - - return ret; -} - -void vmx_set_interrupt_shadow(struct kvm_vcpu *vcpu, int mask) -{ - u32 interruptibility_old = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO); - u32 interruptibility = interruptibility_old; - - interruptibility &= ~(GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS); - - if (mask & KVM_X86_SHADOW_INT_MOV_SS) - interruptibility |= GUEST_INTR_STATE_MOV_SS; - else if (mask & KVM_X86_SHADOW_INT_STI) - interruptibility |= GUEST_INTR_STATE_STI; - - if ((interruptibility != interruptibility_old)) - vmcs_write32(GUEST_INTERRUPTIBILITY_INFO, interruptibility); -} - -static int vmx_rtit_ctl_check(struct kvm_vcpu *vcpu, u64 data) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - unsigned long value; - - /* - * Any MSR write that attempts to change bits marked reserved will - * case a #GP fault. - */ - if (data & vmx->pt_desc.ctl_bitmask) - return 1; - - /* - * Any attempt to modify IA32_RTIT_CTL while TraceEn is set will - * result in a #GP unless the same write also clears TraceEn. - */ - if ((vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) && - ((vmx->pt_desc.guest.ctl ^ data) & ~RTIT_CTL_TRACEEN)) - return 1; - - /* - * WRMSR to IA32_RTIT_CTL that sets TraceEn but clears this bit - * and FabricEn would cause #GP, if - * CPUID.(EAX=14H, ECX=0):ECX.SNGLRGNOUT[bit 2] = 0 - */ - if ((data & RTIT_CTL_TRACEEN) && !(data & RTIT_CTL_TOPA) && - !(data & RTIT_CTL_FABRIC_EN) && - !intel_pt_validate_cap(vmx->pt_desc.caps, - PT_CAP_single_range_output)) - return 1; - - /* - * MTCFreq, CycThresh and PSBFreq encodings check, any MSR write that - * utilize encodings marked reserved will casue a #GP fault. - */ - value = intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_mtc_periods); - if (intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_mtc) && - !test_bit((data & RTIT_CTL_MTC_RANGE) >> - RTIT_CTL_MTC_RANGE_OFFSET, &value)) - return 1; - value = intel_pt_validate_cap(vmx->pt_desc.caps, - PT_CAP_cycle_thresholds); - if (intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_psb_cyc) && - !test_bit((data & RTIT_CTL_CYC_THRESH) >> - RTIT_CTL_CYC_THRESH_OFFSET, &value)) - return 1; - value = intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_psb_periods); - if (intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_psb_cyc) && - !test_bit((data & RTIT_CTL_PSB_FREQ) >> - RTIT_CTL_PSB_FREQ_OFFSET, &value)) - return 1; - - /* - * If ADDRx_CFG is reserved or the encodings is >2 will - * cause a #GP fault. - */ - value = (data & RTIT_CTL_ADDR0) >> RTIT_CTL_ADDR0_OFFSET; - if ((value && (vmx->pt_desc.addr_range < 1)) || (value > 2)) - return 1; - value = (data & RTIT_CTL_ADDR1) >> RTIT_CTL_ADDR1_OFFSET; - if ((value && (vmx->pt_desc.addr_range < 2)) || (value > 2)) - return 1; - value = (data & RTIT_CTL_ADDR2) >> RTIT_CTL_ADDR2_OFFSET; - if ((value && (vmx->pt_desc.addr_range < 3)) || (value > 2)) - return 1; - value = (data & RTIT_CTL_ADDR3) >> RTIT_CTL_ADDR3_OFFSET; - if ((value && (vmx->pt_desc.addr_range < 4)) || (value > 2)) - return 1; - - return 0; -} - -static int skip_emulated_instruction(struct kvm_vcpu *vcpu) -{ - unsigned long rip; - - /* - * Using VMCS.VM_EXIT_INSTRUCTION_LEN on EPT misconfig depends on - * undefined behavior: Intel's SDM doesn't mandate the VMCS field be - * set when EPT misconfig occurs. In practice, real hardware updates - * VM_EXIT_INSTRUCTION_LEN on EPT misconfig, but other hypervisors - * (namely Hyper-V) don't set it due to it being undefined behavior, - * i.e. we end up advancing IP with some random value. - */ - if (!static_cpu_has(X86_FEATURE_HYPERVISOR) || - to_vmx(vcpu)->exit_reason != EXIT_REASON_EPT_MISCONFIG) { - rip = kvm_rip_read(vcpu); - rip += vmcs_read32(VM_EXIT_INSTRUCTION_LEN); - kvm_rip_write(vcpu, rip); - } else { - if (!kvm_emulate_instruction(vcpu, EMULTYPE_SKIP)) - return 0; - } - - /* skipping an emulated instruction also counts */ - vmx_set_interrupt_shadow(vcpu, 0); - - return 1; -} - -static void vmx_clear_hlt(struct kvm_vcpu *vcpu) -{ - /* - * Ensure that we clear the HLT state in the VMCS. We don't need to - * explicitly skip the instruction because if the HLT state is set, - * then the instruction is already executing and RIP has already been - * advanced. - */ - if (kvm_hlt_in_guest(vcpu->kvm) && - vmcs_read32(GUEST_ACTIVITY_STATE) == GUEST_ACTIVITY_HLT) - vmcs_write32(GUEST_ACTIVITY_STATE, GUEST_ACTIVITY_ACTIVE); -} - -static void vmx_queue_exception(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - unsigned nr = vcpu->arch.exception.nr; - bool has_error_code = vcpu->arch.exception.has_error_code; - u32 error_code = vcpu->arch.exception.error_code; - u32 intr_info = nr | INTR_INFO_VALID_MASK; - - kvm_deliver_exception_payload(vcpu); - - if (has_error_code) { - vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE, error_code); - intr_info |= INTR_INFO_DELIVER_CODE_MASK; - } - - if (vmx->rmode.vm86_active) { - int inc_eip = 0; - if (kvm_exception_is_soft(nr)) - inc_eip = vcpu->arch.event_exit_inst_len; - kvm_inject_realmode_interrupt(vcpu, nr, inc_eip); - return; - } - - WARN_ON_ONCE(vmx->emulation_required); - - if (kvm_exception_is_soft(nr)) { - vmcs_write32(VM_ENTRY_INSTRUCTION_LEN, - vmx->vcpu.arch.event_exit_inst_len); - intr_info |= INTR_TYPE_SOFT_EXCEPTION; - } else - intr_info |= INTR_TYPE_HARD_EXCEPTION; - - vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, intr_info); - - vmx_clear_hlt(vcpu); -} - -static bool vmx_rdtscp_supported(void) -{ - return cpu_has_vmx_rdtscp(); -} - -static bool vmx_invpcid_supported(void) -{ - return cpu_has_vmx_invpcid(); -} - -/* - * Swap MSR entry in host/guest MSR entry array. - */ -static void move_msr_up(struct vcpu_vmx *vmx, int from, int to) -{ - struct shared_msr_entry tmp; - - tmp = vmx->guest_msrs[to]; - vmx->guest_msrs[to] = vmx->guest_msrs[from]; - vmx->guest_msrs[from] = tmp; -} - -/* - * Set up the vmcs to automatically save and restore system - * msrs. Don't touch the 64-bit msrs if the guest is in legacy - * mode, as fiddling with msrs is very expensive. - */ -static void setup_msrs(struct vcpu_vmx *vmx) -{ - int save_nmsrs, index; - - save_nmsrs = 0; -#ifdef CONFIG_X86_64 - /* - * The SYSCALL MSRs are only needed on long mode guests, and only - * when EFER.SCE is set. - */ - if (is_long_mode(&vmx->vcpu) && (vmx->vcpu.arch.efer & EFER_SCE)) { - index = __find_msr_index(vmx, MSR_STAR); - if (index >= 0) - move_msr_up(vmx, index, save_nmsrs++); - index = __find_msr_index(vmx, MSR_LSTAR); - if (index >= 0) - move_msr_up(vmx, index, save_nmsrs++); - index = __find_msr_index(vmx, MSR_SYSCALL_MASK); - if (index >= 0) - move_msr_up(vmx, index, save_nmsrs++); - } -#endif - index = __find_msr_index(vmx, MSR_EFER); - if (index >= 0 && update_transition_efer(vmx, index)) - move_msr_up(vmx, index, save_nmsrs++); - index = __find_msr_index(vmx, MSR_TSC_AUX); - if (index >= 0 && guest_cpuid_has(&vmx->vcpu, X86_FEATURE_RDTSCP)) - move_msr_up(vmx, index, save_nmsrs++); - index = __find_msr_index(vmx, MSR_IA32_TSX_CTRL); - if (index >= 0) - move_msr_up(vmx, index, save_nmsrs++); - - vmx->save_nmsrs = save_nmsrs; - vmx->guest_msrs_ready = false; - - if (cpu_has_vmx_msr_bitmap()) - vmx_update_msr_bitmap(&vmx->vcpu); -} - -static u64 vmx_read_l1_tsc_offset(struct kvm_vcpu *vcpu) -{ - struct vmcs12 *vmcs12 = get_vmcs12(vcpu); - - if (is_guest_mode(vcpu) && - (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETTING)) - return vcpu->arch.tsc_offset - vmcs12->tsc_offset; - - return vcpu->arch.tsc_offset; -} - -static u64 vmx_write_l1_tsc_offset(struct kvm_vcpu *vcpu, u64 offset) -{ - struct vmcs12 *vmcs12 = get_vmcs12(vcpu); - u64 g_tsc_offset = 0; - - /* - * We're here if L1 chose not to trap WRMSR to TSC. According - * to the spec, this should set L1's TSC; The offset that L1 - * set for L2 remains unchanged, and still needs to be added - * to the newly set TSC to get L2's TSC. - */ - if (is_guest_mode(vcpu) && - (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETTING)) - g_tsc_offset = vmcs12->tsc_offset; - - trace_kvm_write_tsc_offset(vcpu->vcpu_id, - vcpu->arch.tsc_offset - g_tsc_offset, - offset); - vmcs_write64(TSC_OFFSET, offset + g_tsc_offset); - return offset + g_tsc_offset; -} - -/* - * nested_vmx_allowed() checks whether a guest should be allowed to use VMX - * instructions and MSRs (i.e., nested VMX). Nested VMX is disabled for - * all guests if the "nested" module option is off, and can also be disabled - * for a single guest by disabling its VMX cpuid bit. - */ -bool nested_vmx_allowed(struct kvm_vcpu *vcpu) -{ - return nested && guest_cpuid_has(vcpu, X86_FEATURE_VMX); -} - -static inline bool vmx_feature_control_msr_valid(struct kvm_vcpu *vcpu, - uint64_t val) -{ - uint64_t valid_bits = to_vmx(vcpu)->msr_ia32_feature_control_valid_bits; - - return !(val & ~valid_bits); -} - -static int vmx_get_msr_feature(struct kvm_msr_entry *msr) -{ - switch (msr->index) { - case MSR_IA32_VMX_BASIC ... MSR_IA32_VMX_VMFUNC: - if (!nested) - return 1; - return vmx_get_vmx_msr(&vmcs_config.nested, msr->index, &msr->data); - default: - return 1; - } -} - -/* - * Reads an msr value (of 'msr_index') into 'pdata'. - * Returns 0 on success, non-0 otherwise. - * Assumes vcpu_load() was already called. - */ -static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - struct shared_msr_entry *msr; - u32 index; - - switch (msr_info->index) { -#ifdef CONFIG_X86_64 - case MSR_FS_BASE: - msr_info->data = vmcs_readl(GUEST_FS_BASE); - break; - case MSR_GS_BASE: - msr_info->data = vmcs_readl(GUEST_GS_BASE); - break; - case MSR_KERNEL_GS_BASE: - msr_info->data = vmx_read_guest_kernel_gs_base(vmx); - break; -#endif - case MSR_EFER: - return kvm_get_msr_common(vcpu, msr_info); - case MSR_IA32_TSX_CTRL: - if (!msr_info->host_initiated && - !(vcpu->arch.arch_capabilities & ARCH_CAP_TSX_CTRL_MSR)) - return 1; - goto find_shared_msr; - case MSR_IA32_UMWAIT_CONTROL: - if (!msr_info->host_initiated && !vmx_has_waitpkg(vmx)) - return 1; - - msr_info->data = vmx->msr_ia32_umwait_control; - break; - case MSR_IA32_SPEC_CTRL: - if (!msr_info->host_initiated && - !guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL)) - return 1; - - msr_info->data = to_vmx(vcpu)->spec_ctrl; - break; - case MSR_IA32_SYSENTER_CS: - msr_info->data = vmcs_read32(GUEST_SYSENTER_CS); - break; - case MSR_IA32_SYSENTER_EIP: - msr_info->data = vmcs_readl(GUEST_SYSENTER_EIP); - break; - case MSR_IA32_SYSENTER_ESP: - msr_info->data = vmcs_readl(GUEST_SYSENTER_ESP); - break; - case MSR_IA32_BNDCFGS: - if (!kvm_mpx_supported() || - (!msr_info->host_initiated && - !guest_cpuid_has(vcpu, X86_FEATURE_MPX))) - return 1; - msr_info->data = vmcs_read64(GUEST_BNDCFGS); - break; - case MSR_IA32_MCG_EXT_CTL: - if (!msr_info->host_initiated && - !(vmx->msr_ia32_feature_control & - FEATURE_CONTROL_LMCE)) - return 1; - msr_info->data = vcpu->arch.mcg_ext_ctl; - break; - case MSR_IA32_FEATURE_CONTROL: - msr_info->data = vmx->msr_ia32_feature_control; - break; - case MSR_IA32_VMX_BASIC ... MSR_IA32_VMX_VMFUNC: - if (!nested_vmx_allowed(vcpu)) - return 1; - return vmx_get_vmx_msr(&vmx->nested.msrs, msr_info->index, - &msr_info->data); - case MSR_IA32_RTIT_CTL: - if (pt_mode != PT_MODE_HOST_GUEST) - return 1; - msr_info->data = vmx->pt_desc.guest.ctl; - break; - case MSR_IA32_RTIT_STATUS: - if (pt_mode != PT_MODE_HOST_GUEST) - return 1; - msr_info->data = vmx->pt_desc.guest.status; - break; - case MSR_IA32_RTIT_CR3_MATCH: - if ((pt_mode != PT_MODE_HOST_GUEST) || - !intel_pt_validate_cap(vmx->pt_desc.caps, - PT_CAP_cr3_filtering)) - return 1; - msr_info->data = vmx->pt_desc.guest.cr3_match; - break; - case MSR_IA32_RTIT_OUTPUT_BASE: - if ((pt_mode != PT_MODE_HOST_GUEST) || - (!intel_pt_validate_cap(vmx->pt_desc.caps, - PT_CAP_topa_output) && - !intel_pt_validate_cap(vmx->pt_desc.caps, - PT_CAP_single_range_output))) - return 1; - msr_info->data = vmx->pt_desc.guest.output_base; - break; - case MSR_IA32_RTIT_OUTPUT_MASK: - if ((pt_mode != PT_MODE_HOST_GUEST) || - (!intel_pt_validate_cap(vmx->pt_desc.caps, - PT_CAP_topa_output) && - !intel_pt_validate_cap(vmx->pt_desc.caps, - PT_CAP_single_range_output))) - return 1; - msr_info->data = vmx->pt_desc.guest.output_mask; - break; - case MSR_IA32_RTIT_ADDR0_A ... MSR_IA32_RTIT_ADDR3_B: - index = msr_info->index - MSR_IA32_RTIT_ADDR0_A; - if ((pt_mode != PT_MODE_HOST_GUEST) || - (index >= 2 * intel_pt_validate_cap(vmx->pt_desc.caps, - PT_CAP_num_address_ranges))) - return 1; - if (is_noncanonical_address(data, vcpu)) - return 1; - if (index % 2) - msr_info->data = vmx->pt_desc.guest.addr_b[index / 2]; - else - msr_info->data = vmx->pt_desc.guest.addr_a[index / 2]; - break; - case MSR_TSC_AUX: - if (!msr_info->host_initiated && - !guest_cpuid_has(vcpu, X86_FEATURE_RDTSCP)) - return 1; - goto find_shared_msr; - default: - find_shared_msr: - msr = find_msr_entry(vmx, msr_info->index); - if (msr) { - msr_info->data = msr->data; - break; - } - return kvm_get_msr_common(vcpu, msr_info); - } - - return 0; -} - -/* - * Writes msr value into the appropriate "register". - * Returns 0 on success, non-0 otherwise. - * Assumes vcpu_load() was already called. - */ -static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - struct shared_msr_entry *msr; - int ret = 0; - u32 msr_index = msr_info->index; - u64 data = msr_info->data; - u32 index; - - switch (msr_index) { - case MSR_EFER: - ret = kvm_set_msr_common(vcpu, msr_info); - break; -#ifdef CONFIG_X86_64 - case MSR_FS_BASE: - vmx_segment_cache_clear(vmx); - vmcs_writel(GUEST_FS_BASE, data); - break; - case MSR_GS_BASE: - vmx_segment_cache_clear(vmx); - vmcs_writel(GUEST_GS_BASE, data); - break; - case MSR_KERNEL_GS_BASE: - vmx_write_guest_kernel_gs_base(vmx, data); - break; -#endif - case MSR_IA32_SYSENTER_CS: - if (is_guest_mode(vcpu)) - get_vmcs12(vcpu)->guest_sysenter_cs = data; - vmcs_write32(GUEST_SYSENTER_CS, data); - break; - case MSR_IA32_SYSENTER_EIP: - if (is_guest_mode(vcpu)) - get_vmcs12(vcpu)->guest_sysenter_eip = data; - vmcs_writel(GUEST_SYSENTER_EIP, data); - break; - case MSR_IA32_SYSENTER_ESP: - if (is_guest_mode(vcpu)) - get_vmcs12(vcpu)->guest_sysenter_esp = data; - vmcs_writel(GUEST_SYSENTER_ESP, data); - break; - case MSR_IA32_DEBUGCTLMSR: - if (is_guest_mode(vcpu) && get_vmcs12(vcpu)->vm_exit_controls & - VM_EXIT_SAVE_DEBUG_CONTROLS) - get_vmcs12(vcpu)->guest_ia32_debugctl = data; - - ret = kvm_set_msr_common(vcpu, msr_info); - break; - - case MSR_IA32_BNDCFGS: - if (!kvm_mpx_supported() || - (!msr_info->host_initiated && - !guest_cpuid_has(vcpu, X86_FEATURE_MPX))) - return 1; - if (is_noncanonical_address(data & PAGE_MASK, vcpu) || - (data & MSR_IA32_BNDCFGS_RSVD)) - return 1; - vmcs_write64(GUEST_BNDCFGS, data); - break; - case MSR_IA32_UMWAIT_CONTROL: - if (!msr_info->host_initiated && !vmx_has_waitpkg(vmx)) - return 1; - - /* The reserved bit 1 and non-32 bit [63:32] should be zero */ - if (data & (BIT_ULL(1) | GENMASK_ULL(63, 32))) - return 1; - - vmx->msr_ia32_umwait_control = data; - break; - case MSR_IA32_SPEC_CTRL: - if (!msr_info->host_initiated && - !guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL)) - return 1; - - /* The STIBP bit doesn't fault even if it's not advertised */ - if (data & ~(SPEC_CTRL_IBRS | SPEC_CTRL_STIBP | SPEC_CTRL_SSBD)) - return 1; - - vmx->spec_ctrl = data; - - if (!data) - break; - - /* - * For non-nested: - * When it's written (to non-zero) for the first time, pass - * it through. - * - * For nested: - * The handling of the MSR bitmap for L2 guests is done in - * nested_vmx_prepare_msr_bitmap. We should not touch the - * vmcs02.msr_bitmap here since it gets completely overwritten - * in the merging. We update the vmcs01 here for L1 as well - * since it will end up touching the MSR anyway now. - */ - vmx_disable_intercept_for_msr(vmx->vmcs01.msr_bitmap, - MSR_IA32_SPEC_CTRL, - MSR_TYPE_RW); - break; - case MSR_IA32_TSX_CTRL: - if (!msr_info->host_initiated && - !(vcpu->arch.arch_capabilities & ARCH_CAP_TSX_CTRL_MSR)) - return 1; - if (data & ~(TSX_CTRL_RTM_DISABLE | TSX_CTRL_CPUID_CLEAR)) - return 1; - goto find_shared_msr; - case MSR_IA32_PRED_CMD: - if (!msr_info->host_initiated && - !guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL)) - return 1; - - if (data & ~PRED_CMD_IBPB) - return 1; - - if (!data) - break; - - wrmsrl(MSR_IA32_PRED_CMD, PRED_CMD_IBPB); - - /* - * For non-nested: - * When it's written (to non-zero) for the first time, pass - * it through. - * - * For nested: - * The handling of the MSR bitmap for L2 guests is done in - * nested_vmx_prepare_msr_bitmap. We should not touch the - * vmcs02.msr_bitmap here since it gets completely overwritten - * in the merging. - */ - vmx_disable_intercept_for_msr(vmx->vmcs01.msr_bitmap, MSR_IA32_PRED_CMD, - MSR_TYPE_W); - break; - case MSR_IA32_CR_PAT: - if (!kvm_pat_valid(data)) - return 1; - - if (is_guest_mode(vcpu) && - get_vmcs12(vcpu)->vm_exit_controls & VM_EXIT_SAVE_IA32_PAT) - get_vmcs12(vcpu)->guest_ia32_pat = data; - - if (vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_PAT) { - vmcs_write64(GUEST_IA32_PAT, data); - vcpu->arch.pat = data; - break; - } - ret = kvm_set_msr_common(vcpu, msr_info); - break; - case MSR_IA32_TSC_ADJUST: - ret = kvm_set_msr_common(vcpu, msr_info); - break; - case MSR_IA32_MCG_EXT_CTL: - if ((!msr_info->host_initiated && - !(to_vmx(vcpu)->msr_ia32_feature_control & - FEATURE_CONTROL_LMCE)) || - (data & ~MCG_EXT_CTL_LMCE_EN)) - return 1; - vcpu->arch.mcg_ext_ctl = data; - break; - case MSR_IA32_FEATURE_CONTROL: - if (!vmx_feature_control_msr_valid(vcpu, data) || - (to_vmx(vcpu)->msr_ia32_feature_control & - FEATURE_CONTROL_LOCKED && !msr_info->host_initiated)) - return 1; - vmx->msr_ia32_feature_control = data; - if (msr_info->host_initiated && data == 0) - vmx_leave_nested(vcpu); - break; - case MSR_IA32_VMX_BASIC ... MSR_IA32_VMX_VMFUNC: - if (!msr_info->host_initiated) - return 1; /* they are read-only */ - if (!nested_vmx_allowed(vcpu)) - return 1; - return vmx_set_vmx_msr(vcpu, msr_index, data); - case MSR_IA32_RTIT_CTL: - if ((pt_mode != PT_MODE_HOST_GUEST) || - vmx_rtit_ctl_check(vcpu, data) || - vmx->nested.vmxon) - return 1; - vmcs_write64(GUEST_IA32_RTIT_CTL, data); - vmx->pt_desc.guest.ctl = data; - pt_update_intercept_for_msr(vmx); - break; - case MSR_IA32_RTIT_STATUS: - if ((pt_mode != PT_MODE_HOST_GUEST) || - (vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) || - (data & MSR_IA32_RTIT_STATUS_MASK)) - return 1; - vmx->pt_desc.guest.status = data; - break; - case MSR_IA32_RTIT_CR3_MATCH: - if ((pt_mode != PT_MODE_HOST_GUEST) || - (vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) || - !intel_pt_validate_cap(vmx->pt_desc.caps, - PT_CAP_cr3_filtering)) - return 1; - vmx->pt_desc.guest.cr3_match = data; - break; - case MSR_IA32_RTIT_OUTPUT_BASE: - if ((pt_mode != PT_MODE_HOST_GUEST) || - (vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) || - (!intel_pt_validate_cap(vmx->pt_desc.caps, - PT_CAP_topa_output) && - !intel_pt_validate_cap(vmx->pt_desc.caps, - PT_CAP_single_range_output)) || - (data & MSR_IA32_RTIT_OUTPUT_BASE_MASK)) - return 1; - vmx->pt_desc.guest.output_base = data; - break; - case MSR_IA32_RTIT_OUTPUT_MASK: - if ((pt_mode != PT_MODE_HOST_GUEST) || - (vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) || - (!intel_pt_validate_cap(vmx->pt_desc.caps, - PT_CAP_topa_output) && - !intel_pt_validate_cap(vmx->pt_desc.caps, - PT_CAP_single_range_output))) - return 1; - vmx->pt_desc.guest.output_mask = data; - break; - case MSR_IA32_RTIT_ADDR0_A ... MSR_IA32_RTIT_ADDR3_B: - index = msr_info->index - MSR_IA32_RTIT_ADDR0_A; - if ((pt_mode != PT_MODE_HOST_GUEST) || - (vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) || - (index >= 2 * intel_pt_validate_cap(vmx->pt_desc.caps, - PT_CAP_num_address_ranges))) - return 1; - if (is_noncanonical_address(data, vcpu)) - return 1; - if (index % 2) - vmx->pt_desc.guest.addr_b[index / 2] = data; - else - vmx->pt_desc.guest.addr_a[index / 2] = data; - break; - case MSR_TSC_AUX: - if (!msr_info->host_initiated && - !guest_cpuid_has(vcpu, X86_FEATURE_RDTSCP)) - return 1; - /* Check reserved bit, higher 32 bits should be zero */ - if ((data >> 32) != 0) - return 1; - goto find_shared_msr; - - default: - find_shared_msr: - msr = find_msr_entry(vmx, msr_index); - if (msr) - ret = vmx_set_guest_msr(vmx, msr, data); - else - ret = kvm_set_msr_common(vcpu, msr_info); - } - - return ret; -} - -static void vmx_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg) -{ - kvm_register_mark_available(vcpu, reg); - - switch (reg) { - case VCPU_REGS_RSP: - vcpu->arch.regs[VCPU_REGS_RSP] = vmcs_readl(GUEST_RSP); - break; - case VCPU_REGS_RIP: - vcpu->arch.regs[VCPU_REGS_RIP] = vmcs_readl(GUEST_RIP); - break; - case VCPU_EXREG_PDPTR: - if (enable_ept) - ept_save_pdptrs(vcpu); - break; - case VCPU_EXREG_CR3: - if (enable_unrestricted_guest || (enable_ept && is_paging(vcpu))) - vcpu->arch.cr3 = vmcs_readl(GUEST_CR3); - break; - default: - WARN_ON_ONCE(1); - break; - } -} - -static __init int cpu_has_kvm_support(void) -{ - return cpu_has_vmx(); -} - -static __init int vmx_disabled_by_bios(void) -{ - u64 msr; - - rdmsrl(MSR_IA32_FEATURE_CONTROL, msr); - if (msr & FEATURE_CONTROL_LOCKED) { - /* launched w/ TXT and VMX disabled */ - if (!(msr & FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX) - && tboot_enabled()) - return 1; - /* launched w/o TXT and VMX only enabled w/ TXT */ - if (!(msr & FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX) - && (msr & FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX) - && !tboot_enabled()) { - printk(KERN_WARNING "kvm: disable TXT in the BIOS or " - "activate TXT before enabling KVM\n"); - return 1; - } - /* launched w/o TXT and VMX disabled */ - if (!(msr & FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX) - && !tboot_enabled()) - return 1; - } - - return 0; -} - -static void kvm_cpu_vmxon(u64 addr) -{ - cr4_set_bits(X86_CR4_VMXE); - intel_pt_handle_vmx(1); - - asm volatile ("vmxon %0" : : "m"(addr)); -} - -static int hardware_enable(void) -{ - int cpu = raw_smp_processor_id(); - u64 phys_addr = __pa(per_cpu(vmxarea, cpu)); - u64 old, test_bits; - - if (cr4_read_shadow() & X86_CR4_VMXE) - return -EBUSY; - - /* - * This can happen if we hot-added a CPU but failed to allocate - * VP assist page for it. - */ - if (static_branch_unlikely(&enable_evmcs) && - !hv_get_vp_assist_page(cpu)) - return -EFAULT; - - INIT_LIST_HEAD(&per_cpu(loaded_vmcss_on_cpu, cpu)); - INIT_LIST_HEAD(&per_cpu(blocked_vcpu_on_cpu, cpu)); - spin_lock_init(&per_cpu(blocked_vcpu_on_cpu_lock, cpu)); - - /* - * Now we can enable the vmclear operation in kdump - * since the loaded_vmcss_on_cpu list on this cpu - * has been initialized. - * - * Though the cpu is not in VMX operation now, there - * is no problem to enable the vmclear operation - * for the loaded_vmcss_on_cpu list is empty! - */ - crash_enable_local_vmclear(cpu); - - rdmsrl(MSR_IA32_FEATURE_CONTROL, old); - - test_bits = FEATURE_CONTROL_LOCKED; - test_bits |= FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX; - if (tboot_enabled()) - test_bits |= FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX; - - if ((old & test_bits) != test_bits) { - /* enable and lock */ - wrmsrl(MSR_IA32_FEATURE_CONTROL, old | test_bits); - } - kvm_cpu_vmxon(phys_addr); - if (enable_ept) - ept_sync_global(); - - return 0; -} - -static void vmclear_local_loaded_vmcss(void) -{ - int cpu = raw_smp_processor_id(); - struct loaded_vmcs *v, *n; - - list_for_each_entry_safe(v, n, &per_cpu(loaded_vmcss_on_cpu, cpu), - loaded_vmcss_on_cpu_link) - __loaded_vmcs_clear(v); -} - - -/* Just like cpu_vmxoff(), but with the __kvm_handle_fault_on_reboot() - * tricks. - */ -static void kvm_cpu_vmxoff(void) -{ - asm volatile (__ex("vmxoff")); - - intel_pt_handle_vmx(0); - cr4_clear_bits(X86_CR4_VMXE); -} - -static void hardware_disable(void) -{ - vmclear_local_loaded_vmcss(); - kvm_cpu_vmxoff(); -} - -static __init int adjust_vmx_controls(u32 ctl_min, u32 ctl_opt, - u32 msr, u32 *result) -{ - u32 vmx_msr_low, vmx_msr_high; - u32 ctl = ctl_min | ctl_opt; - - rdmsr(msr, vmx_msr_low, vmx_msr_high); - - ctl &= vmx_msr_high; /* bit == 0 in high word ==> must be zero */ - ctl |= vmx_msr_low; /* bit == 1 in low word ==> must be one */ - - /* Ensure minimum (required) set of control bits are supported. */ - if (ctl_min & ~ctl) - return -EIO; - - *result = ctl; - return 0; -} - -static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf, - struct vmx_capability *vmx_cap) -{ - u32 vmx_msr_low, vmx_msr_high; - u32 min, opt, min2, opt2; - u32 _pin_based_exec_control = 0; - u32 _cpu_based_exec_control = 0; - u32 _cpu_based_2nd_exec_control = 0; - u32 _vmexit_control = 0; - u32 _vmentry_control = 0; - - memset(vmcs_conf, 0, sizeof(*vmcs_conf)); - min = CPU_BASED_HLT_EXITING | -#ifdef CONFIG_X86_64 - CPU_BASED_CR8_LOAD_EXITING | - CPU_BASED_CR8_STORE_EXITING | -#endif - CPU_BASED_CR3_LOAD_EXITING | - CPU_BASED_CR3_STORE_EXITING | - CPU_BASED_UNCOND_IO_EXITING | - CPU_BASED_MOV_DR_EXITING | - CPU_BASED_USE_TSC_OFFSETTING | - CPU_BASED_MWAIT_EXITING | - CPU_BASED_MONITOR_EXITING | - CPU_BASED_INVLPG_EXITING | - CPU_BASED_RDPMC_EXITING; - - opt = CPU_BASED_TPR_SHADOW | - CPU_BASED_USE_MSR_BITMAPS | - CPU_BASED_ACTIVATE_SECONDARY_CONTROLS; - if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PROCBASED_CTLS, - &_cpu_based_exec_control) < 0) - return -EIO; -#ifdef CONFIG_X86_64 - if ((_cpu_based_exec_control & CPU_BASED_TPR_SHADOW)) - _cpu_based_exec_control &= ~CPU_BASED_CR8_LOAD_EXITING & - ~CPU_BASED_CR8_STORE_EXITING; -#endif - if (_cpu_based_exec_control & CPU_BASED_ACTIVATE_SECONDARY_CONTROLS) { - min2 = 0; - opt2 = SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES | - SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE | - SECONDARY_EXEC_WBINVD_EXITING | - SECONDARY_EXEC_ENABLE_VPID | - SECONDARY_EXEC_ENABLE_EPT | - SECONDARY_EXEC_UNRESTRICTED_GUEST | - SECONDARY_EXEC_PAUSE_LOOP_EXITING | - SECONDARY_EXEC_DESC | - SECONDARY_EXEC_RDTSCP | - SECONDARY_EXEC_ENABLE_INVPCID | - SECONDARY_EXEC_APIC_REGISTER_VIRT | - SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY | - SECONDARY_EXEC_SHADOW_VMCS | - SECONDARY_EXEC_XSAVES | - SECONDARY_EXEC_RDSEED_EXITING | - SECONDARY_EXEC_RDRAND_EXITING | - SECONDARY_EXEC_ENABLE_PML | - SECONDARY_EXEC_TSC_SCALING | - SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE | - SECONDARY_EXEC_PT_USE_GPA | - SECONDARY_EXEC_PT_CONCEAL_VMX | - SECONDARY_EXEC_ENABLE_VMFUNC | - SECONDARY_EXEC_ENCLS_EXITING; - if (adjust_vmx_controls(min2, opt2, - MSR_IA32_VMX_PROCBASED_CTLS2, - &_cpu_based_2nd_exec_control) < 0) - return -EIO; - } -#ifndef CONFIG_X86_64 - if (!(_cpu_based_2nd_exec_control & - SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES)) - _cpu_based_exec_control &= ~CPU_BASED_TPR_SHADOW; -#endif - - if (!(_cpu_based_exec_control & CPU_BASED_TPR_SHADOW)) - _cpu_based_2nd_exec_control &= ~( - SECONDARY_EXEC_APIC_REGISTER_VIRT | - SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE | - SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY); - - rdmsr_safe(MSR_IA32_VMX_EPT_VPID_CAP, - &vmx_cap->ept, &vmx_cap->vpid); - - if (_cpu_based_2nd_exec_control & SECONDARY_EXEC_ENABLE_EPT) { - /* CR3 accesses and invlpg don't need to cause VM Exits when EPT - enabled */ - _cpu_based_exec_control &= ~(CPU_BASED_CR3_LOAD_EXITING | - CPU_BASED_CR3_STORE_EXITING | - CPU_BASED_INVLPG_EXITING); - } else if (vmx_cap->ept) { - vmx_cap->ept = 0; - pr_warn_once("EPT CAP should not exist if not support " - "1-setting enable EPT VM-execution control\n"); - } - if (!(_cpu_based_2nd_exec_control & SECONDARY_EXEC_ENABLE_VPID) && - vmx_cap->vpid) { - vmx_cap->vpid = 0; - pr_warn_once("VPID CAP should not exist if not support " - "1-setting enable VPID VM-execution control\n"); - } - - min = VM_EXIT_SAVE_DEBUG_CONTROLS | VM_EXIT_ACK_INTR_ON_EXIT; -#ifdef CONFIG_X86_64 - min |= VM_EXIT_HOST_ADDR_SPACE_SIZE; -#endif - opt = VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL | - VM_EXIT_LOAD_IA32_PAT | - VM_EXIT_LOAD_IA32_EFER | - VM_EXIT_CLEAR_BNDCFGS | - VM_EXIT_PT_CONCEAL_PIP | - VM_EXIT_CLEAR_IA32_RTIT_CTL; - if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_EXIT_CTLS, - &_vmexit_control) < 0) - return -EIO; - - min = PIN_BASED_EXT_INTR_MASK | PIN_BASED_NMI_EXITING; - opt = PIN_BASED_VIRTUAL_NMIS | PIN_BASED_POSTED_INTR | - PIN_BASED_VMX_PREEMPTION_TIMER; - if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PINBASED_CTLS, - &_pin_based_exec_control) < 0) - return -EIO; - - if (cpu_has_broken_vmx_preemption_timer()) - _pin_based_exec_control &= ~PIN_BASED_VMX_PREEMPTION_TIMER; - if (!(_cpu_based_2nd_exec_control & - SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY)) - _pin_based_exec_control &= ~PIN_BASED_POSTED_INTR; - - min = VM_ENTRY_LOAD_DEBUG_CONTROLS; - opt = VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL | - VM_ENTRY_LOAD_IA32_PAT | - VM_ENTRY_LOAD_IA32_EFER | - VM_ENTRY_LOAD_BNDCFGS | - VM_ENTRY_PT_CONCEAL_PIP | - VM_ENTRY_LOAD_IA32_RTIT_CTL; - if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_ENTRY_CTLS, - &_vmentry_control) < 0) - return -EIO; - - /* - * Some cpus support VM_{ENTRY,EXIT}_IA32_PERF_GLOBAL_CTRL but they - * can't be used due to an errata where VM Exit may incorrectly clear - * IA32_PERF_GLOBAL_CTRL[34:32]. Workaround the errata by using the - * MSR load mechanism to switch IA32_PERF_GLOBAL_CTRL. - */ - if (boot_cpu_data.x86 == 0x6) { - switch (boot_cpu_data.x86_model) { - case 26: /* AAK155 */ - case 30: /* AAP115 */ - case 37: /* AAT100 */ - case 44: /* BC86,AAY89,BD102 */ - case 46: /* BA97 */ - _vmentry_control &= ~VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL; - _vmexit_control &= ~VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL; - pr_warn_once("kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL " - "does not work properly. Using workaround\n"); - break; - default: - break; - } - } - - - rdmsr(MSR_IA32_VMX_BASIC, vmx_msr_low, vmx_msr_high); - - /* IA-32 SDM Vol 3B: VMCS size is never greater than 4kB. */ - if ((vmx_msr_high & 0x1fff) > PAGE_SIZE) - return -EIO; - -#ifdef CONFIG_X86_64 - /* IA-32 SDM Vol 3B: 64-bit CPUs always have VMX_BASIC_MSR[48]==0. */ - if (vmx_msr_high & (1u<<16)) - return -EIO; -#endif - - /* Require Write-Back (WB) memory type for VMCS accesses. */ - if (((vmx_msr_high >> 18) & 15) != 6) - return -EIO; - - vmcs_conf->size = vmx_msr_high & 0x1fff; - vmcs_conf->order = get_order(vmcs_conf->size); - vmcs_conf->basic_cap = vmx_msr_high & ~0x1fff; - - vmcs_conf->revision_id = vmx_msr_low; - - vmcs_conf->pin_based_exec_ctrl = _pin_based_exec_control; - vmcs_conf->cpu_based_exec_ctrl = _cpu_based_exec_control; - vmcs_conf->cpu_based_2nd_exec_ctrl = _cpu_based_2nd_exec_control; - vmcs_conf->vmexit_ctrl = _vmexit_control; - vmcs_conf->vmentry_ctrl = _vmentry_control; - - if (static_branch_unlikely(&enable_evmcs)) - evmcs_sanitize_exec_ctrls(vmcs_conf); - - return 0; -} - -struct vmcs *alloc_vmcs_cpu(bool shadow, int cpu, gfp_t flags) -{ - int node = cpu_to_node(cpu); - struct page *pages; - struct vmcs *vmcs; - - pages = __alloc_pages_node(node, flags, vmcs_config.order); - if (!pages) - return NULL; - vmcs = page_address(pages); - memset(vmcs, 0, vmcs_config.size); - - /* KVM supports Enlightened VMCS v1 only */ - if (static_branch_unlikely(&enable_evmcs)) - vmcs->hdr.revision_id = KVM_EVMCS_VERSION; - else - vmcs->hdr.revision_id = vmcs_config.revision_id; - - if (shadow) - vmcs->hdr.shadow_vmcs = 1; - return vmcs; -} - -void free_vmcs(struct vmcs *vmcs) -{ - free_pages((unsigned long)vmcs, vmcs_config.order); -} - -/* - * Free a VMCS, but before that VMCLEAR it on the CPU where it was last loaded - */ -void free_loaded_vmcs(struct loaded_vmcs *loaded_vmcs) -{ - if (!loaded_vmcs->vmcs) - return; - loaded_vmcs_clear(loaded_vmcs); - free_vmcs(loaded_vmcs->vmcs); - loaded_vmcs->vmcs = NULL; - if (loaded_vmcs->msr_bitmap) - free_page((unsigned long)loaded_vmcs->msr_bitmap); - WARN_ON(loaded_vmcs->shadow_vmcs != NULL); -} - -int alloc_loaded_vmcs(struct loaded_vmcs *loaded_vmcs) -{ - loaded_vmcs->vmcs = alloc_vmcs(false); - if (!loaded_vmcs->vmcs) - return -ENOMEM; - - loaded_vmcs->shadow_vmcs = NULL; - loaded_vmcs->hv_timer_soft_disabled = false; - loaded_vmcs_init(loaded_vmcs); - - if (cpu_has_vmx_msr_bitmap()) { - loaded_vmcs->msr_bitmap = (unsigned long *) - __get_free_page(GFP_KERNEL_ACCOUNT); - if (!loaded_vmcs->msr_bitmap) - goto out_vmcs; - memset(loaded_vmcs->msr_bitmap, 0xff, PAGE_SIZE); - - if (IS_ENABLED(CONFIG_HYPERV) && - static_branch_unlikely(&enable_evmcs) && - (ms_hyperv.nested_features & HV_X64_NESTED_MSR_BITMAP)) { - struct hv_enlightened_vmcs *evmcs = - (struct hv_enlightened_vmcs *)loaded_vmcs->vmcs; - - evmcs->hv_enlightenments_control.msr_bitmap = 1; - } - } - - memset(&loaded_vmcs->host_state, 0, sizeof(struct vmcs_host_state)); - memset(&loaded_vmcs->controls_shadow, 0, - sizeof(struct vmcs_controls_shadow)); - - return 0; - -out_vmcs: - free_loaded_vmcs(loaded_vmcs); - return -ENOMEM; -} - -static void free_kvm_area(void) -{ - int cpu; - - for_each_possible_cpu(cpu) { - free_vmcs(per_cpu(vmxarea, cpu)); - per_cpu(vmxarea, cpu) = NULL; - } -} - -static __init int alloc_kvm_area(void) -{ - int cpu; - - for_each_possible_cpu(cpu) { - struct vmcs *vmcs; - - vmcs = alloc_vmcs_cpu(false, cpu, GFP_KERNEL); - if (!vmcs) { - free_kvm_area(); - return -ENOMEM; - } - - /* - * When eVMCS is enabled, alloc_vmcs_cpu() sets - * vmcs->revision_id to KVM_EVMCS_VERSION instead of - * revision_id reported by MSR_IA32_VMX_BASIC. - * - * However, even though not explicitly documented by - * TLFS, VMXArea passed as VMXON argument should - * still be marked with revision_id reported by - * physical CPU. - */ - if (static_branch_unlikely(&enable_evmcs)) - vmcs->hdr.revision_id = vmcs_config.revision_id; - - per_cpu(vmxarea, cpu) = vmcs; - } - return 0; -} - -static void fix_pmode_seg(struct kvm_vcpu *vcpu, int seg, - struct kvm_segment *save) -{ - if (!emulate_invalid_guest_state) { - /* - * CS and SS RPL should be equal during guest entry according - * to VMX spec, but in reality it is not always so. Since vcpu - * is in the middle of the transition from real mode to - * protected mode it is safe to assume that RPL 0 is a good - * default value. - */ - if (seg == VCPU_SREG_CS || seg == VCPU_SREG_SS) - save->selector &= ~SEGMENT_RPL_MASK; - save->dpl = save->selector & SEGMENT_RPL_MASK; - save->s = 1; - } - vmx_set_segment(vcpu, save, seg); -} - -static void enter_pmode(struct kvm_vcpu *vcpu) -{ - unsigned long flags; - struct vcpu_vmx *vmx = to_vmx(vcpu); - - /* - * Update real mode segment cache. It may be not up-to-date if sement - * register was written while vcpu was in a guest mode. - */ - vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_ES], VCPU_SREG_ES); - vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_DS], VCPU_SREG_DS); - vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_FS], VCPU_SREG_FS); - vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_GS], VCPU_SREG_GS); - vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_SS], VCPU_SREG_SS); - vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_CS], VCPU_SREG_CS); - - vmx->rmode.vm86_active = 0; - - vmx_segment_cache_clear(vmx); - - vmx_set_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_TR], VCPU_SREG_TR); - - flags = vmcs_readl(GUEST_RFLAGS); - flags &= RMODE_GUEST_OWNED_EFLAGS_BITS; - flags |= vmx->rmode.save_rflags & ~RMODE_GUEST_OWNED_EFLAGS_BITS; - vmcs_writel(GUEST_RFLAGS, flags); - - vmcs_writel(GUEST_CR4, (vmcs_readl(GUEST_CR4) & ~X86_CR4_VME) | - (vmcs_readl(CR4_READ_SHADOW) & X86_CR4_VME)); - - update_exception_bitmap(vcpu); - - fix_pmode_seg(vcpu, VCPU_SREG_CS, &vmx->rmode.segs[VCPU_SREG_CS]); - fix_pmode_seg(vcpu, VCPU_SREG_SS, &vmx->rmode.segs[VCPU_SREG_SS]); - fix_pmode_seg(vcpu, VCPU_SREG_ES, &vmx->rmode.segs[VCPU_SREG_ES]); - fix_pmode_seg(vcpu, VCPU_SREG_DS, &vmx->rmode.segs[VCPU_SREG_DS]); - fix_pmode_seg(vcpu, VCPU_SREG_FS, &vmx->rmode.segs[VCPU_SREG_FS]); - fix_pmode_seg(vcpu, VCPU_SREG_GS, &vmx->rmode.segs[VCPU_SREG_GS]); -} - -static void fix_rmode_seg(int seg, struct kvm_segment *save) -{ - const struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg]; - struct kvm_segment var = *save; - - var.dpl = 0x3; - if (seg == VCPU_SREG_CS) - var.type = 0x3; - - if (!emulate_invalid_guest_state) { - var.selector = var.base >> 4; - var.base = var.base & 0xffff0; - var.limit = 0xffff; - var.g = 0; - var.db = 0; - var.present = 1; - var.s = 1; - var.l = 0; - var.unusable = 0; - var.type = 0x3; - var.avl = 0; - if (save->base & 0xf) - printk_once(KERN_WARNING "kvm: segment base is not " - "paragraph aligned when entering " - "protected mode (seg=%d)", seg); - } - - vmcs_write16(sf->selector, var.selector); - vmcs_writel(sf->base, var.base); - vmcs_write32(sf->limit, var.limit); - vmcs_write32(sf->ar_bytes, vmx_segment_access_rights(&var)); -} - -static void enter_rmode(struct kvm_vcpu *vcpu) -{ - unsigned long flags; - struct vcpu_vmx *vmx = to_vmx(vcpu); - struct kvm_vmx *kvm_vmx = to_kvm_vmx(vcpu->kvm); - - vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_TR], VCPU_SREG_TR); - vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_ES], VCPU_SREG_ES); - vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_DS], VCPU_SREG_DS); - vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_FS], VCPU_SREG_FS); - vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_GS], VCPU_SREG_GS); - vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_SS], VCPU_SREG_SS); - vmx_get_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_CS], VCPU_SREG_CS); - - vmx->rmode.vm86_active = 1; - - /* - * Very old userspace does not call KVM_SET_TSS_ADDR before entering - * vcpu. Warn the user that an update is overdue. - */ - if (!kvm_vmx->tss_addr) - printk_once(KERN_WARNING "kvm: KVM_SET_TSS_ADDR need to be " - "called before entering vcpu\n"); - - vmx_segment_cache_clear(vmx); - - vmcs_writel(GUEST_TR_BASE, kvm_vmx->tss_addr); - vmcs_write32(GUEST_TR_LIMIT, RMODE_TSS_SIZE - 1); - vmcs_write32(GUEST_TR_AR_BYTES, 0x008b); - - flags = vmcs_readl(GUEST_RFLAGS); - vmx->rmode.save_rflags = flags; - - flags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM; - - vmcs_writel(GUEST_RFLAGS, flags); - vmcs_writel(GUEST_CR4, vmcs_readl(GUEST_CR4) | X86_CR4_VME); - update_exception_bitmap(vcpu); - - fix_rmode_seg(VCPU_SREG_SS, &vmx->rmode.segs[VCPU_SREG_SS]); - fix_rmode_seg(VCPU_SREG_CS, &vmx->rmode.segs[VCPU_SREG_CS]); - fix_rmode_seg(VCPU_SREG_ES, &vmx->rmode.segs[VCPU_SREG_ES]); - fix_rmode_seg(VCPU_SREG_DS, &vmx->rmode.segs[VCPU_SREG_DS]); - fix_rmode_seg(VCPU_SREG_GS, &vmx->rmode.segs[VCPU_SREG_GS]); - fix_rmode_seg(VCPU_SREG_FS, &vmx->rmode.segs[VCPU_SREG_FS]); - - kvm_mmu_reset_context(vcpu); -} - -void vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - struct shared_msr_entry *msr = find_msr_entry(vmx, MSR_EFER); - - if (!msr) - return; - - vcpu->arch.efer = efer; - if (efer & EFER_LMA) { - vm_entry_controls_setbit(to_vmx(vcpu), VM_ENTRY_IA32E_MODE); - msr->data = efer; - } else { - vm_entry_controls_clearbit(to_vmx(vcpu), VM_ENTRY_IA32E_MODE); - - msr->data = efer & ~EFER_LME; - } - setup_msrs(vmx); -} - -#ifdef CONFIG_X86_64 - -static void enter_lmode(struct kvm_vcpu *vcpu) -{ - u32 guest_tr_ar; - - vmx_segment_cache_clear(to_vmx(vcpu)); - - guest_tr_ar = vmcs_read32(GUEST_TR_AR_BYTES); - if ((guest_tr_ar & VMX_AR_TYPE_MASK) != VMX_AR_TYPE_BUSY_64_TSS) { - pr_debug_ratelimited("%s: tss fixup for long mode. \n", - __func__); - vmcs_write32(GUEST_TR_AR_BYTES, - (guest_tr_ar & ~VMX_AR_TYPE_MASK) - | VMX_AR_TYPE_BUSY_64_TSS); - } - vmx_set_efer(vcpu, vcpu->arch.efer | EFER_LMA); -} - -static void exit_lmode(struct kvm_vcpu *vcpu) -{ - vm_entry_controls_clearbit(to_vmx(vcpu), VM_ENTRY_IA32E_MODE); - vmx_set_efer(vcpu, vcpu->arch.efer & ~EFER_LMA); -} - -#endif - -static void vmx_flush_tlb_gva(struct kvm_vcpu *vcpu, gva_t addr) -{ - int vpid = to_vmx(vcpu)->vpid; - - if (!vpid_sync_vcpu_addr(vpid, addr)) - vpid_sync_context(vpid); - - /* - * If VPIDs are not supported or enabled, then the above is a no-op. - * But we don't really need a TLB flush in that case anyway, because - * each VM entry/exit includes an implicit flush when VPID is 0. - */ -} - -static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu) -{ - ulong cr0_guest_owned_bits = vcpu->arch.cr0_guest_owned_bits; - - vcpu->arch.cr0 &= ~cr0_guest_owned_bits; - vcpu->arch.cr0 |= vmcs_readl(GUEST_CR0) & cr0_guest_owned_bits; -} - -static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu) -{ - ulong cr4_guest_owned_bits = vcpu->arch.cr4_guest_owned_bits; - - vcpu->arch.cr4 &= ~cr4_guest_owned_bits; - vcpu->arch.cr4 |= vmcs_readl(GUEST_CR4) & cr4_guest_owned_bits; -} - -static void ept_load_pdptrs(struct kvm_vcpu *vcpu) -{ - struct kvm_mmu *mmu = vcpu->arch.walk_mmu; - - if (!kvm_register_is_dirty(vcpu, VCPU_EXREG_PDPTR)) - return; - - if (is_pae_paging(vcpu)) { - vmcs_write64(GUEST_PDPTR0, mmu->pdptrs[0]); - vmcs_write64(GUEST_PDPTR1, mmu->pdptrs[1]); - vmcs_write64(GUEST_PDPTR2, mmu->pdptrs[2]); - vmcs_write64(GUEST_PDPTR3, mmu->pdptrs[3]); - } -} - -void ept_save_pdptrs(struct kvm_vcpu *vcpu) -{ - struct kvm_mmu *mmu = vcpu->arch.walk_mmu; - - if (is_pae_paging(vcpu)) { - mmu->pdptrs[0] = vmcs_read64(GUEST_PDPTR0); - mmu->pdptrs[1] = vmcs_read64(GUEST_PDPTR1); - mmu->pdptrs[2] = vmcs_read64(GUEST_PDPTR2); - mmu->pdptrs[3] = vmcs_read64(GUEST_PDPTR3); - } - - kvm_register_mark_dirty(vcpu, VCPU_EXREG_PDPTR); -} - -static void ept_update_paging_mode_cr0(unsigned long *hw_cr0, - unsigned long cr0, - struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - - if (!kvm_register_is_available(vcpu, VCPU_EXREG_CR3)) - vmx_cache_reg(vcpu, VCPU_EXREG_CR3); - if (!(cr0 & X86_CR0_PG)) { - /* From paging/starting to nonpaging */ - exec_controls_setbit(vmx, CPU_BASED_CR3_LOAD_EXITING | - CPU_BASED_CR3_STORE_EXITING); - vcpu->arch.cr0 = cr0; - vmx_set_cr4(vcpu, kvm_read_cr4(vcpu)); - } else if (!is_paging(vcpu)) { - /* From nonpaging to paging */ - exec_controls_clearbit(vmx, CPU_BASED_CR3_LOAD_EXITING | - CPU_BASED_CR3_STORE_EXITING); - vcpu->arch.cr0 = cr0; - vmx_set_cr4(vcpu, kvm_read_cr4(vcpu)); - } - - if (!(cr0 & X86_CR0_WP)) - *hw_cr0 &= ~X86_CR0_WP; -} - -void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - unsigned long hw_cr0; - - hw_cr0 = (cr0 & ~KVM_VM_CR0_ALWAYS_OFF); - if (enable_unrestricted_guest) - hw_cr0 |= KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST; - else { - hw_cr0 |= KVM_VM_CR0_ALWAYS_ON; - - if (vmx->rmode.vm86_active && (cr0 & X86_CR0_PE)) - enter_pmode(vcpu); - - if (!vmx->rmode.vm86_active && !(cr0 & X86_CR0_PE)) - enter_rmode(vcpu); - } - -#ifdef CONFIG_X86_64 - if (vcpu->arch.efer & EFER_LME) { - if (!is_paging(vcpu) && (cr0 & X86_CR0_PG)) - enter_lmode(vcpu); - if (is_paging(vcpu) && !(cr0 & X86_CR0_PG)) - exit_lmode(vcpu); - } -#endif - - if (enable_ept && !enable_unrestricted_guest) - ept_update_paging_mode_cr0(&hw_cr0, cr0, vcpu); - - vmcs_writel(CR0_READ_SHADOW, cr0); - vmcs_writel(GUEST_CR0, hw_cr0); - vcpu->arch.cr0 = cr0; - - /* depends on vcpu->arch.cr0 to be set to a new value */ - vmx->emulation_required = emulation_required(vcpu); -} - -static int get_ept_level(struct kvm_vcpu *vcpu) -{ - if (cpu_has_vmx_ept_5levels() && (cpuid_maxphyaddr(vcpu) > 48)) - return 5; - return 4; -} - -u64 construct_eptp(struct kvm_vcpu *vcpu, unsigned long root_hpa) -{ - u64 eptp = VMX_EPTP_MT_WB; - - eptp |= (get_ept_level(vcpu) == 5) ? VMX_EPTP_PWL_5 : VMX_EPTP_PWL_4; - - if (enable_ept_ad_bits && - (!is_guest_mode(vcpu) || nested_ept_ad_enabled(vcpu))) - eptp |= VMX_EPTP_AD_ENABLE_BIT; - eptp |= (root_hpa & PAGE_MASK); - - return eptp; -} - -void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3) -{ - struct kvm *kvm = vcpu->kvm; - bool update_guest_cr3 = true; - unsigned long guest_cr3; - u64 eptp; - - guest_cr3 = cr3; - if (enable_ept) { - eptp = construct_eptp(vcpu, cr3); - vmcs_write64(EPT_POINTER, eptp); - - if (kvm_x86_ops->tlb_remote_flush) { - spin_lock(&to_kvm_vmx(kvm)->ept_pointer_lock); - to_vmx(vcpu)->ept_pointer = eptp; - to_kvm_vmx(kvm)->ept_pointers_match - = EPT_POINTERS_CHECK; - spin_unlock(&to_kvm_vmx(kvm)->ept_pointer_lock); - } - - /* Loading vmcs02.GUEST_CR3 is handled by nested VM-Enter. */ - if (is_guest_mode(vcpu)) - update_guest_cr3 = false; - else if (!enable_unrestricted_guest && !is_paging(vcpu)) - guest_cr3 = to_kvm_vmx(kvm)->ept_identity_map_addr; - else if (test_bit(VCPU_EXREG_CR3, (ulong *)&vcpu->arch.regs_avail)) - guest_cr3 = vcpu->arch.cr3; - else /* vmcs01.GUEST_CR3 is already up-to-date. */ - update_guest_cr3 = false; - ept_load_pdptrs(vcpu); - } - - if (update_guest_cr3) - vmcs_writel(GUEST_CR3, guest_cr3); -} - -int vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - /* - * Pass through host's Machine Check Enable value to hw_cr4, which - * is in force while we are in guest mode. Do not let guests control - * this bit, even if host CR4.MCE == 0. - */ - unsigned long hw_cr4; - - hw_cr4 = (cr4_read_shadow() & X86_CR4_MCE) | (cr4 & ~X86_CR4_MCE); - if (enable_unrestricted_guest) - hw_cr4 |= KVM_VM_CR4_ALWAYS_ON_UNRESTRICTED_GUEST; - else if (vmx->rmode.vm86_active) - hw_cr4 |= KVM_RMODE_VM_CR4_ALWAYS_ON; - else - hw_cr4 |= KVM_PMODE_VM_CR4_ALWAYS_ON; - - if (!boot_cpu_has(X86_FEATURE_UMIP) && vmx_umip_emulated()) { - if (cr4 & X86_CR4_UMIP) { - secondary_exec_controls_setbit(vmx, SECONDARY_EXEC_DESC); - hw_cr4 &= ~X86_CR4_UMIP; - } else if (!is_guest_mode(vcpu) || - !nested_cpu_has2(get_vmcs12(vcpu), SECONDARY_EXEC_DESC)) { - secondary_exec_controls_clearbit(vmx, SECONDARY_EXEC_DESC); - } - } - - if (cr4 & X86_CR4_VMXE) { - /* - * To use VMXON (and later other VMX instructions), a guest - * must first be able to turn on cr4.VMXE (see handle_vmon()). - * So basically the check on whether to allow nested VMX - * is here. We operate under the default treatment of SMM, - * so VMX cannot be enabled under SMM. - */ - if (!nested_vmx_allowed(vcpu) || is_smm(vcpu)) - return 1; - } - - if (vmx->nested.vmxon && !nested_cr4_valid(vcpu, cr4)) - return 1; - - vcpu->arch.cr4 = cr4; - - if (!enable_unrestricted_guest) { - if (enable_ept) { - if (!is_paging(vcpu)) { - hw_cr4 &= ~X86_CR4_PAE; - hw_cr4 |= X86_CR4_PSE; - } else if (!(cr4 & X86_CR4_PAE)) { - hw_cr4 &= ~X86_CR4_PAE; - } - } - - /* - * SMEP/SMAP/PKU is disabled if CPU is in non-paging mode in - * hardware. To emulate this behavior, SMEP/SMAP/PKU needs - * to be manually disabled when guest switches to non-paging - * mode. - * - * If !enable_unrestricted_guest, the CPU is always running - * with CR0.PG=1 and CR4 needs to be modified. - * If enable_unrestricted_guest, the CPU automatically - * disables SMEP/SMAP/PKU when the guest sets CR0.PG=0. - */ - if (!is_paging(vcpu)) - hw_cr4 &= ~(X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_PKE); - } - - vmcs_writel(CR4_READ_SHADOW, cr4); - vmcs_writel(GUEST_CR4, hw_cr4); - return 0; -} - -void vmx_get_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - u32 ar; - - if (vmx->rmode.vm86_active && seg != VCPU_SREG_LDTR) { - *var = vmx->rmode.segs[seg]; - if (seg == VCPU_SREG_TR - || var->selector == vmx_read_guest_seg_selector(vmx, seg)) - return; - var->base = vmx_read_guest_seg_base(vmx, seg); - var->selector = vmx_read_guest_seg_selector(vmx, seg); - return; - } - var->base = vmx_read_guest_seg_base(vmx, seg); - var->limit = vmx_read_guest_seg_limit(vmx, seg); - var->selector = vmx_read_guest_seg_selector(vmx, seg); - ar = vmx_read_guest_seg_ar(vmx, seg); - var->unusable = (ar >> 16) & 1; - var->type = ar & 15; - var->s = (ar >> 4) & 1; - var->dpl = (ar >> 5) & 3; - /* - * Some userspaces do not preserve unusable property. Since usable - * segment has to be present according to VMX spec we can use present - * property to amend userspace bug by making unusable segment always - * nonpresent. vmx_segment_access_rights() already marks nonpresent - * segment as unusable. - */ - var->present = !var->unusable; - var->avl = (ar >> 12) & 1; - var->l = (ar >> 13) & 1; - var->db = (ar >> 14) & 1; - var->g = (ar >> 15) & 1; -} - -static u64 vmx_get_segment_base(struct kvm_vcpu *vcpu, int seg) -{ - struct kvm_segment s; - - if (to_vmx(vcpu)->rmode.vm86_active) { - vmx_get_segment(vcpu, &s, seg); - return s.base; - } - return vmx_read_guest_seg_base(to_vmx(vcpu), seg); -} - -int vmx_get_cpl(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - - if (unlikely(vmx->rmode.vm86_active)) - return 0; - else { - int ar = vmx_read_guest_seg_ar(vmx, VCPU_SREG_SS); - return VMX_AR_DPL(ar); - } -} - -static u32 vmx_segment_access_rights(struct kvm_segment *var) -{ - u32 ar; - - if (var->unusable || !var->present) - ar = 1 << 16; - else { - ar = var->type & 15; - ar |= (var->s & 1) << 4; - ar |= (var->dpl & 3) << 5; - ar |= (var->present & 1) << 7; - ar |= (var->avl & 1) << 12; - ar |= (var->l & 1) << 13; - ar |= (var->db & 1) << 14; - ar |= (var->g & 1) << 15; - } - - return ar; -} - -void vmx_set_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - const struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg]; - - vmx_segment_cache_clear(vmx); - - if (vmx->rmode.vm86_active && seg != VCPU_SREG_LDTR) { - vmx->rmode.segs[seg] = *var; - if (seg == VCPU_SREG_TR) - vmcs_write16(sf->selector, var->selector); - else if (var->s) - fix_rmode_seg(seg, &vmx->rmode.segs[seg]); - goto out; - } - - vmcs_writel(sf->base, var->base); - vmcs_write32(sf->limit, var->limit); - vmcs_write16(sf->selector, var->selector); - - /* - * Fix the "Accessed" bit in AR field of segment registers for older - * qemu binaries. - * IA32 arch specifies that at the time of processor reset the - * "Accessed" bit in the AR field of segment registers is 1. And qemu - * is setting it to 0 in the userland code. This causes invalid guest - * state vmexit when "unrestricted guest" mode is turned on. - * Fix for this setup issue in cpu_reset is being pushed in the qemu - * tree. Newer qemu binaries with that qemu fix would not need this - * kvm hack. - */ - if (enable_unrestricted_guest && (seg != VCPU_SREG_LDTR)) - var->type |= 0x1; /* Accessed */ - - vmcs_write32(sf->ar_bytes, vmx_segment_access_rights(var)); - -out: - vmx->emulation_required = emulation_required(vcpu); -} - -static void vmx_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l) -{ - u32 ar = vmx_read_guest_seg_ar(to_vmx(vcpu), VCPU_SREG_CS); - - *db = (ar >> 14) & 1; - *l = (ar >> 13) & 1; -} - -static void vmx_get_idt(struct kvm_vcpu *vcpu, struct desc_ptr *dt) -{ - dt->size = vmcs_read32(GUEST_IDTR_LIMIT); - dt->address = vmcs_readl(GUEST_IDTR_BASE); -} - -static void vmx_set_idt(struct kvm_vcpu *vcpu, struct desc_ptr *dt) -{ - vmcs_write32(GUEST_IDTR_LIMIT, dt->size); - vmcs_writel(GUEST_IDTR_BASE, dt->address); -} - -static void vmx_get_gdt(struct kvm_vcpu *vcpu, struct desc_ptr *dt) -{ - dt->size = vmcs_read32(GUEST_GDTR_LIMIT); - dt->address = vmcs_readl(GUEST_GDTR_BASE); -} - -static void vmx_set_gdt(struct kvm_vcpu *vcpu, struct desc_ptr *dt) -{ - vmcs_write32(GUEST_GDTR_LIMIT, dt->size); - vmcs_writel(GUEST_GDTR_BASE, dt->address); -} - -static bool rmode_segment_valid(struct kvm_vcpu *vcpu, int seg) -{ - struct kvm_segment var; - u32 ar; - - vmx_get_segment(vcpu, &var, seg); - var.dpl = 0x3; - if (seg == VCPU_SREG_CS) - var.type = 0x3; - ar = vmx_segment_access_rights(&var); - - if (var.base != (var.selector << 4)) - return false; - if (var.limit != 0xffff) - return false; - if (ar != 0xf3) - return false; - - return true; -} - -static bool code_segment_valid(struct kvm_vcpu *vcpu) -{ - struct kvm_segment cs; - unsigned int cs_rpl; - - vmx_get_segment(vcpu, &cs, VCPU_SREG_CS); - cs_rpl = cs.selector & SEGMENT_RPL_MASK; - - if (cs.unusable) - return false; - if (~cs.type & (VMX_AR_TYPE_CODE_MASK|VMX_AR_TYPE_ACCESSES_MASK)) - return false; - if (!cs.s) - return false; - if (cs.type & VMX_AR_TYPE_WRITEABLE_MASK) { - if (cs.dpl > cs_rpl) - return false; - } else { - if (cs.dpl != cs_rpl) - return false; - } - if (!cs.present) - return false; - - /* TODO: Add Reserved field check, this'll require a new member in the kvm_segment_field structure */ - return true; -} - -static bool stack_segment_valid(struct kvm_vcpu *vcpu) -{ - struct kvm_segment ss; - unsigned int ss_rpl; - - vmx_get_segment(vcpu, &ss, VCPU_SREG_SS); - ss_rpl = ss.selector & SEGMENT_RPL_MASK; - - if (ss.unusable) - return true; - if (ss.type != 3 && ss.type != 7) - return false; - if (!ss.s) - return false; - if (ss.dpl != ss_rpl) /* DPL != RPL */ - return false; - if (!ss.present) - return false; - - return true; -} - -static bool data_segment_valid(struct kvm_vcpu *vcpu, int seg) -{ - struct kvm_segment var; - unsigned int rpl; - - vmx_get_segment(vcpu, &var, seg); - rpl = var.selector & SEGMENT_RPL_MASK; - - if (var.unusable) - return true; - if (!var.s) - return false; - if (!var.present) - return false; - if (~var.type & (VMX_AR_TYPE_CODE_MASK|VMX_AR_TYPE_WRITEABLE_MASK)) { - if (var.dpl < rpl) /* DPL < RPL */ - return false; - } - - /* TODO: Add other members to kvm_segment_field to allow checking for other access - * rights flags - */ - return true; -} - -static bool tr_valid(struct kvm_vcpu *vcpu) -{ - struct kvm_segment tr; - - vmx_get_segment(vcpu, &tr, VCPU_SREG_TR); - - if (tr.unusable) - return false; - if (tr.selector & SEGMENT_TI_MASK) /* TI = 1 */ - return false; - if (tr.type != 3 && tr.type != 11) /* TODO: Check if guest is in IA32e mode */ - return false; - if (!tr.present) - return false; - - return true; -} - -static bool ldtr_valid(struct kvm_vcpu *vcpu) -{ - struct kvm_segment ldtr; - - vmx_get_segment(vcpu, &ldtr, VCPU_SREG_LDTR); - - if (ldtr.unusable) - return true; - if (ldtr.selector & SEGMENT_TI_MASK) /* TI = 1 */ - return false; - if (ldtr.type != 2) - return false; - if (!ldtr.present) - return false; - - return true; -} - -static bool cs_ss_rpl_check(struct kvm_vcpu *vcpu) -{ - struct kvm_segment cs, ss; - - vmx_get_segment(vcpu, &cs, VCPU_SREG_CS); - vmx_get_segment(vcpu, &ss, VCPU_SREG_SS); - - return ((cs.selector & SEGMENT_RPL_MASK) == - (ss.selector & SEGMENT_RPL_MASK)); -} - -/* - * Check if guest state is valid. Returns true if valid, false if - * not. - * We assume that registers are always usable - */ -static bool guest_state_valid(struct kvm_vcpu *vcpu) -{ - if (enable_unrestricted_guest) - return true; - - /* real mode guest state checks */ - if (!is_protmode(vcpu) || (vmx_get_rflags(vcpu) & X86_EFLAGS_VM)) { - if (!rmode_segment_valid(vcpu, VCPU_SREG_CS)) - return false; - if (!rmode_segment_valid(vcpu, VCPU_SREG_SS)) - return false; - if (!rmode_segment_valid(vcpu, VCPU_SREG_DS)) - return false; - if (!rmode_segment_valid(vcpu, VCPU_SREG_ES)) - return false; - if (!rmode_segment_valid(vcpu, VCPU_SREG_FS)) - return false; - if (!rmode_segment_valid(vcpu, VCPU_SREG_GS)) - return false; - } else { - /* protected mode guest state checks */ - if (!cs_ss_rpl_check(vcpu)) - return false; - if (!code_segment_valid(vcpu)) - return false; - if (!stack_segment_valid(vcpu)) - return false; - if (!data_segment_valid(vcpu, VCPU_SREG_DS)) - return false; - if (!data_segment_valid(vcpu, VCPU_SREG_ES)) - return false; - if (!data_segment_valid(vcpu, VCPU_SREG_FS)) - return false; - if (!data_segment_valid(vcpu, VCPU_SREG_GS)) - return false; - if (!tr_valid(vcpu)) - return false; - if (!ldtr_valid(vcpu)) - return false; - } - /* TODO: - * - Add checks on RIP - * - Add checks on RFLAGS - */ - - return true; -} - -static int init_rmode_tss(struct kvm *kvm) -{ - gfn_t fn; - u16 data = 0; - int idx, r; - - idx = srcu_read_lock(&kvm->srcu); - fn = to_kvm_vmx(kvm)->tss_addr >> PAGE_SHIFT; - r = kvm_clear_guest_page(kvm, fn, 0, PAGE_SIZE); - if (r < 0) - goto out; - data = TSS_BASE_SIZE + TSS_REDIRECTION_SIZE; - r = kvm_write_guest_page(kvm, fn++, &data, - TSS_IOPB_BASE_OFFSET, sizeof(u16)); - if (r < 0) - goto out; - r = kvm_clear_guest_page(kvm, fn++, 0, PAGE_SIZE); - if (r < 0) - goto out; - r = kvm_clear_guest_page(kvm, fn, 0, PAGE_SIZE); - if (r < 0) - goto out; - data = ~0; - r = kvm_write_guest_page(kvm, fn, &data, - RMODE_TSS_SIZE - 2 * PAGE_SIZE - 1, - sizeof(u8)); -out: - srcu_read_unlock(&kvm->srcu, idx); - return r; -} - -static int init_rmode_identity_map(struct kvm *kvm) -{ - struct kvm_vmx *kvm_vmx = to_kvm_vmx(kvm); - int i, idx, r = 0; - kvm_pfn_t identity_map_pfn; - u32 tmp; - - /* Protect kvm_vmx->ept_identity_pagetable_done. */ - mutex_lock(&kvm->slots_lock); - - if (likely(kvm_vmx->ept_identity_pagetable_done)) - goto out2; - - if (!kvm_vmx->ept_identity_map_addr) - kvm_vmx->ept_identity_map_addr = VMX_EPT_IDENTITY_PAGETABLE_ADDR; - identity_map_pfn = kvm_vmx->ept_identity_map_addr >> PAGE_SHIFT; - - r = __x86_set_memory_region(kvm, IDENTITY_PAGETABLE_PRIVATE_MEMSLOT, - kvm_vmx->ept_identity_map_addr, PAGE_SIZE); - if (r < 0) - goto out2; - - idx = srcu_read_lock(&kvm->srcu); - r = kvm_clear_guest_page(kvm, identity_map_pfn, 0, PAGE_SIZE); - if (r < 0) - goto out; - /* Set up identity-mapping pagetable for EPT in real mode */ - for (i = 0; i < PT32_ENT_PER_PAGE; i++) { - tmp = (i << 22) + (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | - _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_PSE); - r = kvm_write_guest_page(kvm, identity_map_pfn, - &tmp, i * sizeof(tmp), sizeof(tmp)); - if (r < 0) - goto out; - } - kvm_vmx->ept_identity_pagetable_done = true; - -out: - srcu_read_unlock(&kvm->srcu, idx); - -out2: - mutex_unlock(&kvm->slots_lock); - return r; -} - -static void seg_setup(int seg) -{ - const struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg]; - unsigned int ar; - - vmcs_write16(sf->selector, 0); - vmcs_writel(sf->base, 0); - vmcs_write32(sf->limit, 0xffff); - ar = 0x93; - if (seg == VCPU_SREG_CS) - ar |= 0x08; /* code segment */ - - vmcs_write32(sf->ar_bytes, ar); -} - -static int alloc_apic_access_page(struct kvm *kvm) -{ - struct page *page; - int r = 0; - - mutex_lock(&kvm->slots_lock); - if (kvm->arch.apic_access_page_done) - goto out; - r = __x86_set_memory_region(kvm, APIC_ACCESS_PAGE_PRIVATE_MEMSLOT, - APIC_DEFAULT_PHYS_BASE, PAGE_SIZE); - if (r) - goto out; - - page = gfn_to_page(kvm, APIC_DEFAULT_PHYS_BASE >> PAGE_SHIFT); - if (is_error_page(page)) { - r = -EFAULT; - goto out; - } - - /* - * Do not pin the page in memory, so that memory hot-unplug - * is able to migrate it. - */ - put_page(page); - kvm->arch.apic_access_page_done = true; -out: - mutex_unlock(&kvm->slots_lock); - return r; -} - -int allocate_vpid(void) -{ - int vpid; - - if (!enable_vpid) - return 0; - spin_lock(&vmx_vpid_lock); - vpid = find_first_zero_bit(vmx_vpid_bitmap, VMX_NR_VPIDS); - if (vpid < VMX_NR_VPIDS) - __set_bit(vpid, vmx_vpid_bitmap); - else - vpid = 0; - spin_unlock(&vmx_vpid_lock); - return vpid; -} - -void free_vpid(int vpid) -{ - if (!enable_vpid || vpid == 0) - return; - spin_lock(&vmx_vpid_lock); - __clear_bit(vpid, vmx_vpid_bitmap); - spin_unlock(&vmx_vpid_lock); -} - -static __always_inline void vmx_disable_intercept_for_msr(unsigned long *msr_bitmap, - u32 msr, int type) -{ - int f = sizeof(unsigned long); - - if (!cpu_has_vmx_msr_bitmap()) - return; - - if (static_branch_unlikely(&enable_evmcs)) - evmcs_touch_msr_bitmap(); - - /* - * See Intel PRM Vol. 3, 20.6.9 (MSR-Bitmap Address). Early manuals - * have the write-low and read-high bitmap offsets the wrong way round. - * We can control MSRs 0x00000000-0x00001fff and 0xc0000000-0xc0001fff. - */ - if (msr <= 0x1fff) { - if (type & MSR_TYPE_R) - /* read-low */ - __clear_bit(msr, msr_bitmap + 0x000 / f); - - if (type & MSR_TYPE_W) - /* write-low */ - __clear_bit(msr, msr_bitmap + 0x800 / f); - - } else if ((msr >= 0xc0000000) && (msr <= 0xc0001fff)) { - msr &= 0x1fff; - if (type & MSR_TYPE_R) - /* read-high */ - __clear_bit(msr, msr_bitmap + 0x400 / f); - - if (type & MSR_TYPE_W) - /* write-high */ - __clear_bit(msr, msr_bitmap + 0xc00 / f); - - } -} - -static __always_inline void vmx_enable_intercept_for_msr(unsigned long *msr_bitmap, - u32 msr, int type) -{ - int f = sizeof(unsigned long); - - if (!cpu_has_vmx_msr_bitmap()) - return; - - if (static_branch_unlikely(&enable_evmcs)) - evmcs_touch_msr_bitmap(); - - /* - * See Intel PRM Vol. 3, 20.6.9 (MSR-Bitmap Address). Early manuals - * have the write-low and read-high bitmap offsets the wrong way round. - * We can control MSRs 0x00000000-0x00001fff and 0xc0000000-0xc0001fff. - */ - if (msr <= 0x1fff) { - if (type & MSR_TYPE_R) - /* read-low */ - __set_bit(msr, msr_bitmap + 0x000 / f); - - if (type & MSR_TYPE_W) - /* write-low */ - __set_bit(msr, msr_bitmap + 0x800 / f); - - } else if ((msr >= 0xc0000000) && (msr <= 0xc0001fff)) { - msr &= 0x1fff; - if (type & MSR_TYPE_R) - /* read-high */ - __set_bit(msr, msr_bitmap + 0x400 / f); - - if (type & MSR_TYPE_W) - /* write-high */ - __set_bit(msr, msr_bitmap + 0xc00 / f); - - } -} - -static __always_inline void vmx_set_intercept_for_msr(unsigned long *msr_bitmap, - u32 msr, int type, bool value) -{ - if (value) - vmx_enable_intercept_for_msr(msr_bitmap, msr, type); - else - vmx_disable_intercept_for_msr(msr_bitmap, msr, type); -} - -static u8 vmx_msr_bitmap_mode(struct kvm_vcpu *vcpu) -{ - u8 mode = 0; - - if (cpu_has_secondary_exec_ctrls() && - (secondary_exec_controls_get(to_vmx(vcpu)) & - SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE)) { - mode |= MSR_BITMAP_MODE_X2APIC; - if (enable_apicv && kvm_vcpu_apicv_active(vcpu)) - mode |= MSR_BITMAP_MODE_X2APIC_APICV; - } - - return mode; -} - -static void vmx_update_msr_bitmap_x2apic(unsigned long *msr_bitmap, - u8 mode) -{ - int msr; - - for (msr = 0x800; msr <= 0x8ff; msr += BITS_PER_LONG) { - unsigned word = msr / BITS_PER_LONG; - msr_bitmap[word] = (mode & MSR_BITMAP_MODE_X2APIC_APICV) ? 0 : ~0; - msr_bitmap[word + (0x800 / sizeof(long))] = ~0; - } - - if (mode & MSR_BITMAP_MODE_X2APIC) { - /* - * TPR reads and writes can be virtualized even if virtual interrupt - * delivery is not in use. - */ - vmx_disable_intercept_for_msr(msr_bitmap, X2APIC_MSR(APIC_TASKPRI), MSR_TYPE_RW); - if (mode & MSR_BITMAP_MODE_X2APIC_APICV) { - vmx_enable_intercept_for_msr(msr_bitmap, X2APIC_MSR(APIC_TMCCT), MSR_TYPE_R); - vmx_disable_intercept_for_msr(msr_bitmap, X2APIC_MSR(APIC_EOI), MSR_TYPE_W); - vmx_disable_intercept_for_msr(msr_bitmap, X2APIC_MSR(APIC_SELF_IPI), MSR_TYPE_W); - } - } -} - -void vmx_update_msr_bitmap(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - unsigned long *msr_bitmap = vmx->vmcs01.msr_bitmap; - u8 mode = vmx_msr_bitmap_mode(vcpu); - u8 changed = mode ^ vmx->msr_bitmap_mode; - - if (!changed) - return; - - if (changed & (MSR_BITMAP_MODE_X2APIC | MSR_BITMAP_MODE_X2APIC_APICV)) - vmx_update_msr_bitmap_x2apic(msr_bitmap, mode); - - vmx->msr_bitmap_mode = mode; -} - -void pt_update_intercept_for_msr(struct vcpu_vmx *vmx) -{ - unsigned long *msr_bitmap = vmx->vmcs01.msr_bitmap; - bool flag = !(vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN); - u32 i; - - vmx_set_intercept_for_msr(msr_bitmap, MSR_IA32_RTIT_STATUS, - MSR_TYPE_RW, flag); - vmx_set_intercept_for_msr(msr_bitmap, MSR_IA32_RTIT_OUTPUT_BASE, - MSR_TYPE_RW, flag); - vmx_set_intercept_for_msr(msr_bitmap, MSR_IA32_RTIT_OUTPUT_MASK, - MSR_TYPE_RW, flag); - vmx_set_intercept_for_msr(msr_bitmap, MSR_IA32_RTIT_CR3_MATCH, - MSR_TYPE_RW, flag); - for (i = 0; i < vmx->pt_desc.addr_range; i++) { - vmx_set_intercept_for_msr(msr_bitmap, - MSR_IA32_RTIT_ADDR0_A + i * 2, MSR_TYPE_RW, flag); - vmx_set_intercept_for_msr(msr_bitmap, - MSR_IA32_RTIT_ADDR0_B + i * 2, MSR_TYPE_RW, flag); - } -} - -static bool vmx_get_enable_apicv(struct kvm *kvm) -{ - return enable_apicv; -} - -static bool vmx_guest_apic_has_interrupt(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - void *vapic_page; - u32 vppr; - int rvi; - - if (WARN_ON_ONCE(!is_guest_mode(vcpu)) || - !nested_cpu_has_vid(get_vmcs12(vcpu)) || - WARN_ON_ONCE(!vmx->nested.virtual_apic_map.gfn)) - return false; - - rvi = vmx_get_rvi(); - - vapic_page = vmx->nested.virtual_apic_map.hva; - vppr = *((u32 *)(vapic_page + APIC_PROCPRI)); - - return ((rvi & 0xf0) > (vppr & 0xf0)); -} - -static inline bool kvm_vcpu_trigger_posted_interrupt(struct kvm_vcpu *vcpu, - bool nested) -{ -#ifdef CONFIG_SMP - int pi_vec = nested ? POSTED_INTR_NESTED_VECTOR : POSTED_INTR_VECTOR; - - if (vcpu->mode == IN_GUEST_MODE) { - /* - * The vector of interrupt to be delivered to vcpu had - * been set in PIR before this function. - * - * Following cases will be reached in this block, and - * we always send a notification event in all cases as - * explained below. - * - * Case 1: vcpu keeps in non-root mode. Sending a - * notification event posts the interrupt to vcpu. - * - * Case 2: vcpu exits to root mode and is still - * runnable. PIR will be synced to vIRR before the - * next vcpu entry. Sending a notification event in - * this case has no effect, as vcpu is not in root - * mode. - * - * Case 3: vcpu exits to root mode and is blocked. - * vcpu_block() has already synced PIR to vIRR and - * never blocks vcpu if vIRR is not cleared. Therefore, - * a blocked vcpu here does not wait for any requested - * interrupts in PIR, and sending a notification event - * which has no effect is safe here. - */ - - apic->send_IPI_mask(get_cpu_mask(vcpu->cpu), pi_vec); - return true; - } -#endif - return false; -} - -static int vmx_deliver_nested_posted_interrupt(struct kvm_vcpu *vcpu, - int vector) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - - if (is_guest_mode(vcpu) && - vector == vmx->nested.posted_intr_nv) { - /* - * If a posted intr is not recognized by hardware, - * we will accomplish it in the next vmentry. - */ - vmx->nested.pi_pending = true; - kvm_make_request(KVM_REQ_EVENT, vcpu); - /* the PIR and ON have been set by L1. */ - if (!kvm_vcpu_trigger_posted_interrupt(vcpu, true)) - kvm_vcpu_kick(vcpu); - return 0; - } - return -1; -} -/* - * Send interrupt to vcpu via posted interrupt way. - * 1. If target vcpu is running(non-root mode), send posted interrupt - * notification to vcpu and hardware will sync PIR to vIRR atomically. - * 2. If target vcpu isn't running(root mode), kick it to pick up the - * interrupt from PIR in next vmentry. - */ -static void vmx_deliver_posted_interrupt(struct kvm_vcpu *vcpu, int vector) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - int r; - - r = vmx_deliver_nested_posted_interrupt(vcpu, vector); - if (!r) - return; - - if (pi_test_and_set_pir(vector, &vmx->pi_desc)) - return; - - /* If a previous notification has sent the IPI, nothing to do. */ - if (pi_test_and_set_on(&vmx->pi_desc)) - return; - - if (!kvm_vcpu_trigger_posted_interrupt(vcpu, false)) - kvm_vcpu_kick(vcpu); -} - -/* - * Set up the vmcs's constant host-state fields, i.e., host-state fields that - * will not change in the lifetime of the guest. - * Note that host-state that does change is set elsewhere. E.g., host-state - * that is set differently for each CPU is set in vmx_vcpu_load(), not here. - */ -void vmx_set_constant_host_state(struct vcpu_vmx *vmx) -{ - u32 low32, high32; - unsigned long tmpl; - unsigned long cr0, cr3, cr4; - - cr0 = read_cr0(); - WARN_ON(cr0 & X86_CR0_TS); - vmcs_writel(HOST_CR0, cr0); /* 22.2.3 */ - - /* - * Save the most likely value for this task's CR3 in the VMCS. - * We can't use __get_current_cr3_fast() because we're not atomic. - */ - cr3 = __read_cr3(); - vmcs_writel(HOST_CR3, cr3); /* 22.2.3 FIXME: shadow tables */ - vmx->loaded_vmcs->host_state.cr3 = cr3; - - /* Save the most likely value for this task's CR4 in the VMCS. */ - cr4 = cr4_read_shadow(); - vmcs_writel(HOST_CR4, cr4); /* 22.2.3, 22.2.5 */ - vmx->loaded_vmcs->host_state.cr4 = cr4; - - vmcs_write16(HOST_CS_SELECTOR, __KERNEL_CS); /* 22.2.4 */ -#ifdef CONFIG_X86_64 - /* - * Load null selectors, so we can avoid reloading them in - * vmx_prepare_switch_to_host(), in case userspace uses - * the null selectors too (the expected case). - */ - vmcs_write16(HOST_DS_SELECTOR, 0); - vmcs_write16(HOST_ES_SELECTOR, 0); -#else - vmcs_write16(HOST_DS_SELECTOR, __KERNEL_DS); /* 22.2.4 */ - vmcs_write16(HOST_ES_SELECTOR, __KERNEL_DS); /* 22.2.4 */ -#endif - vmcs_write16(HOST_SS_SELECTOR, __KERNEL_DS); /* 22.2.4 */ - vmcs_write16(HOST_TR_SELECTOR, GDT_ENTRY_TSS*8); /* 22.2.4 */ - - vmcs_writel(HOST_IDTR_BASE, host_idt_base); /* 22.2.4 */ - - vmcs_writel(HOST_RIP, (unsigned long)vmx_vmexit); /* 22.2.5 */ - - rdmsr(MSR_IA32_SYSENTER_CS, low32, high32); - vmcs_write32(HOST_IA32_SYSENTER_CS, low32); - rdmsrl(MSR_IA32_SYSENTER_EIP, tmpl); - vmcs_writel(HOST_IA32_SYSENTER_EIP, tmpl); /* 22.2.3 */ - - if (vmcs_config.vmexit_ctrl & VM_EXIT_LOAD_IA32_PAT) { - rdmsr(MSR_IA32_CR_PAT, low32, high32); - vmcs_write64(HOST_IA32_PAT, low32 | ((u64) high32 << 32)); - } - - if (cpu_has_load_ia32_efer()) - vmcs_write64(HOST_IA32_EFER, host_efer); -} - -void set_cr4_guest_host_mask(struct vcpu_vmx *vmx) -{ - vmx->vcpu.arch.cr4_guest_owned_bits = KVM_CR4_GUEST_OWNED_BITS; - if (enable_ept) - vmx->vcpu.arch.cr4_guest_owned_bits |= X86_CR4_PGE; - if (is_guest_mode(&vmx->vcpu)) - vmx->vcpu.arch.cr4_guest_owned_bits &= - ~get_vmcs12(&vmx->vcpu)->cr4_guest_host_mask; - vmcs_writel(CR4_GUEST_HOST_MASK, ~vmx->vcpu.arch.cr4_guest_owned_bits); -} - -u32 vmx_pin_based_exec_ctrl(struct vcpu_vmx *vmx) -{ - u32 pin_based_exec_ctrl = vmcs_config.pin_based_exec_ctrl; - - if (!kvm_vcpu_apicv_active(&vmx->vcpu)) - pin_based_exec_ctrl &= ~PIN_BASED_POSTED_INTR; - - if (!enable_vnmi) - pin_based_exec_ctrl &= ~PIN_BASED_VIRTUAL_NMIS; - - if (!enable_preemption_timer) - pin_based_exec_ctrl &= ~PIN_BASED_VMX_PREEMPTION_TIMER; - - return pin_based_exec_ctrl; -} - -static void vmx_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - - pin_controls_set(vmx, vmx_pin_based_exec_ctrl(vmx)); - if (cpu_has_secondary_exec_ctrls()) { - if (kvm_vcpu_apicv_active(vcpu)) - secondary_exec_controls_setbit(vmx, - SECONDARY_EXEC_APIC_REGISTER_VIRT | - SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY); - else - secondary_exec_controls_clearbit(vmx, - SECONDARY_EXEC_APIC_REGISTER_VIRT | - SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY); - } - - if (cpu_has_vmx_msr_bitmap()) - vmx_update_msr_bitmap(vcpu); -} - -u32 vmx_exec_control(struct vcpu_vmx *vmx) -{ - u32 exec_control = vmcs_config.cpu_based_exec_ctrl; - - if (vmx->vcpu.arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT) - exec_control &= ~CPU_BASED_MOV_DR_EXITING; - - if (!cpu_need_tpr_shadow(&vmx->vcpu)) { - exec_control &= ~CPU_BASED_TPR_SHADOW; -#ifdef CONFIG_X86_64 - exec_control |= CPU_BASED_CR8_STORE_EXITING | - CPU_BASED_CR8_LOAD_EXITING; -#endif - } - if (!enable_ept) - exec_control |= CPU_BASED_CR3_STORE_EXITING | - CPU_BASED_CR3_LOAD_EXITING | - CPU_BASED_INVLPG_EXITING; - if (kvm_mwait_in_guest(vmx->vcpu.kvm)) - exec_control &= ~(CPU_BASED_MWAIT_EXITING | - CPU_BASED_MONITOR_EXITING); - if (kvm_hlt_in_guest(vmx->vcpu.kvm)) - exec_control &= ~CPU_BASED_HLT_EXITING; - return exec_control; -} - - -static void vmx_compute_secondary_exec_control(struct vcpu_vmx *vmx) -{ - struct kvm_vcpu *vcpu = &vmx->vcpu; - - u32 exec_control = vmcs_config.cpu_based_2nd_exec_ctrl; - - if (pt_mode == PT_MODE_SYSTEM) - exec_control &= ~(SECONDARY_EXEC_PT_USE_GPA | SECONDARY_EXEC_PT_CONCEAL_VMX); - if (!cpu_need_virtualize_apic_accesses(vcpu)) - exec_control &= ~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES; - if (vmx->vpid == 0) - exec_control &= ~SECONDARY_EXEC_ENABLE_VPID; - if (!enable_ept) { - exec_control &= ~SECONDARY_EXEC_ENABLE_EPT; - enable_unrestricted_guest = 0; - } - if (!enable_unrestricted_guest) - exec_control &= ~SECONDARY_EXEC_UNRESTRICTED_GUEST; - if (kvm_pause_in_guest(vmx->vcpu.kvm)) - exec_control &= ~SECONDARY_EXEC_PAUSE_LOOP_EXITING; - if (!kvm_vcpu_apicv_active(vcpu)) - exec_control &= ~(SECONDARY_EXEC_APIC_REGISTER_VIRT | - SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY); - exec_control &= ~SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE; - - /* SECONDARY_EXEC_DESC is enabled/disabled on writes to CR4.UMIP, - * in vmx_set_cr4. */ - exec_control &= ~SECONDARY_EXEC_DESC; - - /* SECONDARY_EXEC_SHADOW_VMCS is enabled when L1 executes VMPTRLD - (handle_vmptrld). - We can NOT enable shadow_vmcs here because we don't have yet - a current VMCS12 - */ - exec_control &= ~SECONDARY_EXEC_SHADOW_VMCS; - - if (!enable_pml) - exec_control &= ~SECONDARY_EXEC_ENABLE_PML; - - if (vmx_xsaves_supported()) { - /* Exposing XSAVES only when XSAVE is exposed */ - bool xsaves_enabled = - guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) && - guest_cpuid_has(vcpu, X86_FEATURE_XSAVES); - - vcpu->arch.xsaves_enabled = xsaves_enabled; - - if (!xsaves_enabled) - exec_control &= ~SECONDARY_EXEC_XSAVES; - - if (nested) { - if (xsaves_enabled) - vmx->nested.msrs.secondary_ctls_high |= - SECONDARY_EXEC_XSAVES; - else - vmx->nested.msrs.secondary_ctls_high &= - ~SECONDARY_EXEC_XSAVES; - } - } - - if (vmx_rdtscp_supported()) { - bool rdtscp_enabled = guest_cpuid_has(vcpu, X86_FEATURE_RDTSCP); - if (!rdtscp_enabled) - exec_control &= ~SECONDARY_EXEC_RDTSCP; - - if (nested) { - if (rdtscp_enabled) - vmx->nested.msrs.secondary_ctls_high |= - SECONDARY_EXEC_RDTSCP; - else - vmx->nested.msrs.secondary_ctls_high &= - ~SECONDARY_EXEC_RDTSCP; - } - } - - if (vmx_invpcid_supported()) { - /* Exposing INVPCID only when PCID is exposed */ - bool invpcid_enabled = - guest_cpuid_has(vcpu, X86_FEATURE_INVPCID) && - guest_cpuid_has(vcpu, X86_FEATURE_PCID); - - if (!invpcid_enabled) { - exec_control &= ~SECONDARY_EXEC_ENABLE_INVPCID; - guest_cpuid_clear(vcpu, X86_FEATURE_INVPCID); - } - - if (nested) { - if (invpcid_enabled) - vmx->nested.msrs.secondary_ctls_high |= - SECONDARY_EXEC_ENABLE_INVPCID; - else - vmx->nested.msrs.secondary_ctls_high &= - ~SECONDARY_EXEC_ENABLE_INVPCID; - } - } - - if (vmx_rdrand_supported()) { - bool rdrand_enabled = guest_cpuid_has(vcpu, X86_FEATURE_RDRAND); - if (rdrand_enabled) - exec_control &= ~SECONDARY_EXEC_RDRAND_EXITING; - - if (nested) { - if (rdrand_enabled) - vmx->nested.msrs.secondary_ctls_high |= - SECONDARY_EXEC_RDRAND_EXITING; - else - vmx->nested.msrs.secondary_ctls_high &= - ~SECONDARY_EXEC_RDRAND_EXITING; - } - } - - if (vmx_rdseed_supported()) { - bool rdseed_enabled = guest_cpuid_has(vcpu, X86_FEATURE_RDSEED); - if (rdseed_enabled) - exec_control &= ~SECONDARY_EXEC_RDSEED_EXITING; - - if (nested) { - if (rdseed_enabled) - vmx->nested.msrs.secondary_ctls_high |= - SECONDARY_EXEC_RDSEED_EXITING; - else - vmx->nested.msrs.secondary_ctls_high &= - ~SECONDARY_EXEC_RDSEED_EXITING; - } - } - - if (vmx_waitpkg_supported()) { - bool waitpkg_enabled = - guest_cpuid_has(vcpu, X86_FEATURE_WAITPKG); - - if (!waitpkg_enabled) - exec_control &= ~SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE; - - if (nested) { - if (waitpkg_enabled) - vmx->nested.msrs.secondary_ctls_high |= - SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE; - else - vmx->nested.msrs.secondary_ctls_high &= - ~SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE; - } - } - - vmx->secondary_exec_control = exec_control; -} - -static void ept_set_mmio_spte_mask(void) -{ - /* - * EPT Misconfigurations can be generated if the value of bits 2:0 - * of an EPT paging-structure entry is 110b (write/execute). - */ - kvm_mmu_set_mmio_spte_mask(VMX_EPT_RWX_MASK, - VMX_EPT_MISCONFIG_WX_VALUE, 0); -} - -#define VMX_XSS_EXIT_BITMAP 0 - -/* - * Noting that the initialization of Guest-state Area of VMCS is in - * vmx_vcpu_reset(). - */ -static void init_vmcs(struct vcpu_vmx *vmx) -{ - if (nested) - nested_vmx_set_vmcs_shadowing_bitmap(); - - if (cpu_has_vmx_msr_bitmap()) - vmcs_write64(MSR_BITMAP, __pa(vmx->vmcs01.msr_bitmap)); - - vmcs_write64(VMCS_LINK_POINTER, -1ull); /* 22.3.1.5 */ - - /* Control */ - pin_controls_set(vmx, vmx_pin_based_exec_ctrl(vmx)); - - exec_controls_set(vmx, vmx_exec_control(vmx)); - - if (cpu_has_secondary_exec_ctrls()) { - vmx_compute_secondary_exec_control(vmx); - secondary_exec_controls_set(vmx, vmx->secondary_exec_control); - } - - if (kvm_vcpu_apicv_active(&vmx->vcpu)) { - vmcs_write64(EOI_EXIT_BITMAP0, 0); - vmcs_write64(EOI_EXIT_BITMAP1, 0); - vmcs_write64(EOI_EXIT_BITMAP2, 0); - vmcs_write64(EOI_EXIT_BITMAP3, 0); - - vmcs_write16(GUEST_INTR_STATUS, 0); - - vmcs_write16(POSTED_INTR_NV, POSTED_INTR_VECTOR); - vmcs_write64(POSTED_INTR_DESC_ADDR, __pa((&vmx->pi_desc))); - } - - if (!kvm_pause_in_guest(vmx->vcpu.kvm)) { - vmcs_write32(PLE_GAP, ple_gap); - vmx->ple_window = ple_window; - vmx->ple_window_dirty = true; - } - - vmcs_write32(PAGE_FAULT_ERROR_CODE_MASK, 0); - vmcs_write32(PAGE_FAULT_ERROR_CODE_MATCH, 0); - vmcs_write32(CR3_TARGET_COUNT, 0); /* 22.2.1 */ - - vmcs_write16(HOST_FS_SELECTOR, 0); /* 22.2.4 */ - vmcs_write16(HOST_GS_SELECTOR, 0); /* 22.2.4 */ - vmx_set_constant_host_state(vmx); - vmcs_writel(HOST_FS_BASE, 0); /* 22.2.4 */ - vmcs_writel(HOST_GS_BASE, 0); /* 22.2.4 */ - - if (cpu_has_vmx_vmfunc()) - vmcs_write64(VM_FUNCTION_CONTROL, 0); - - vmcs_write32(VM_EXIT_MSR_STORE_COUNT, 0); - vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, 0); - vmcs_write64(VM_EXIT_MSR_LOAD_ADDR, __pa(vmx->msr_autoload.host.val)); - vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, 0); - vmcs_write64(VM_ENTRY_MSR_LOAD_ADDR, __pa(vmx->msr_autoload.guest.val)); - - if (vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_PAT) - vmcs_write64(GUEST_IA32_PAT, vmx->vcpu.arch.pat); - - vm_exit_controls_set(vmx, vmx_vmexit_ctrl()); - - /* 22.2.1, 20.8.1 */ - vm_entry_controls_set(vmx, vmx_vmentry_ctrl()); - - vmx->vcpu.arch.cr0_guest_owned_bits = X86_CR0_TS; - vmcs_writel(CR0_GUEST_HOST_MASK, ~X86_CR0_TS); - - set_cr4_guest_host_mask(vmx); - - if (vmx->vpid != 0) - vmcs_write16(VIRTUAL_PROCESSOR_ID, vmx->vpid); - - if (vmx_xsaves_supported()) - vmcs_write64(XSS_EXIT_BITMAP, VMX_XSS_EXIT_BITMAP); - - if (enable_pml) { - vmcs_write64(PML_ADDRESS, page_to_phys(vmx->pml_pg)); - vmcs_write16(GUEST_PML_INDEX, PML_ENTITY_NUM - 1); - } - - if (cpu_has_vmx_encls_vmexit()) - vmcs_write64(ENCLS_EXITING_BITMAP, -1ull); - - if (pt_mode == PT_MODE_HOST_GUEST) { - memset(&vmx->pt_desc, 0, sizeof(vmx->pt_desc)); - /* Bit[6~0] are forced to 1, writes are ignored. */ - vmx->pt_desc.guest.output_mask = 0x7F; - vmcs_write64(GUEST_IA32_RTIT_CTL, 0); - } -} - -static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - struct msr_data apic_base_msr; - u64 cr0; - - vmx->rmode.vm86_active = 0; - vmx->spec_ctrl = 0; - - vmx->msr_ia32_umwait_control = 0; - - vcpu->arch.microcode_version = 0x100000000ULL; - vmx->vcpu.arch.regs[VCPU_REGS_RDX] = get_rdx_init_val(); - vmx->hv_deadline_tsc = -1; - kvm_set_cr8(vcpu, 0); - - if (!init_event) { - apic_base_msr.data = APIC_DEFAULT_PHYS_BASE | - MSR_IA32_APICBASE_ENABLE; - if (kvm_vcpu_is_reset_bsp(vcpu)) - apic_base_msr.data |= MSR_IA32_APICBASE_BSP; - apic_base_msr.host_initiated = true; - kvm_set_apic_base(vcpu, &apic_base_msr); - } - - vmx_segment_cache_clear(vmx); - - seg_setup(VCPU_SREG_CS); - vmcs_write16(GUEST_CS_SELECTOR, 0xf000); - vmcs_writel(GUEST_CS_BASE, 0xffff0000ul); - - seg_setup(VCPU_SREG_DS); - seg_setup(VCPU_SREG_ES); - seg_setup(VCPU_SREG_FS); - seg_setup(VCPU_SREG_GS); - seg_setup(VCPU_SREG_SS); - - vmcs_write16(GUEST_TR_SELECTOR, 0); - vmcs_writel(GUEST_TR_BASE, 0); - vmcs_write32(GUEST_TR_LIMIT, 0xffff); - vmcs_write32(GUEST_TR_AR_BYTES, 0x008b); - - vmcs_write16(GUEST_LDTR_SELECTOR, 0); - vmcs_writel(GUEST_LDTR_BASE, 0); - vmcs_write32(GUEST_LDTR_LIMIT, 0xffff); - vmcs_write32(GUEST_LDTR_AR_BYTES, 0x00082); - - if (!init_event) { - vmcs_write32(GUEST_SYSENTER_CS, 0); - vmcs_writel(GUEST_SYSENTER_ESP, 0); - vmcs_writel(GUEST_SYSENTER_EIP, 0); - vmcs_write64(GUEST_IA32_DEBUGCTL, 0); - } - - kvm_set_rflags(vcpu, X86_EFLAGS_FIXED); - kvm_rip_write(vcpu, 0xfff0); - - vmcs_writel(GUEST_GDTR_BASE, 0); - vmcs_write32(GUEST_GDTR_LIMIT, 0xffff); - - vmcs_writel(GUEST_IDTR_BASE, 0); - vmcs_write32(GUEST_IDTR_LIMIT, 0xffff); - - vmcs_write32(GUEST_ACTIVITY_STATE, GUEST_ACTIVITY_ACTIVE); - vmcs_write32(GUEST_INTERRUPTIBILITY_INFO, 0); - vmcs_writel(GUEST_PENDING_DBG_EXCEPTIONS, 0); - if (kvm_mpx_supported()) - vmcs_write64(GUEST_BNDCFGS, 0); - - setup_msrs(vmx); - - vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, 0); /* 22.2.1 */ - - if (cpu_has_vmx_tpr_shadow() && !init_event) { - vmcs_write64(VIRTUAL_APIC_PAGE_ADDR, 0); - if (cpu_need_tpr_shadow(vcpu)) - vmcs_write64(VIRTUAL_APIC_PAGE_ADDR, - __pa(vcpu->arch.apic->regs)); - vmcs_write32(TPR_THRESHOLD, 0); - } - - kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu); - - cr0 = X86_CR0_NW | X86_CR0_CD | X86_CR0_ET; - vmx->vcpu.arch.cr0 = cr0; - vmx_set_cr0(vcpu, cr0); /* enter rmode */ - vmx_set_cr4(vcpu, 0); - vmx_set_efer(vcpu, 0); - - update_exception_bitmap(vcpu); - - vpid_sync_context(vmx->vpid); - if (init_event) - vmx_clear_hlt(vcpu); -} - -static void enable_irq_window(struct kvm_vcpu *vcpu) -{ - exec_controls_setbit(to_vmx(vcpu), CPU_BASED_INTR_WINDOW_EXITING); -} - -static void enable_nmi_window(struct kvm_vcpu *vcpu) -{ - if (!enable_vnmi || - vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & GUEST_INTR_STATE_STI) { - enable_irq_window(vcpu); - return; - } - - exec_controls_setbit(to_vmx(vcpu), CPU_BASED_NMI_WINDOW_EXITING); -} - -static void vmx_inject_irq(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - uint32_t intr; - int irq = vcpu->arch.interrupt.nr; - - trace_kvm_inj_virq(irq); - - ++vcpu->stat.irq_injections; - if (vmx->rmode.vm86_active) { - int inc_eip = 0; - if (vcpu->arch.interrupt.soft) - inc_eip = vcpu->arch.event_exit_inst_len; - kvm_inject_realmode_interrupt(vcpu, irq, inc_eip); - return; - } - intr = irq | INTR_INFO_VALID_MASK; - if (vcpu->arch.interrupt.soft) { - intr |= INTR_TYPE_SOFT_INTR; - vmcs_write32(VM_ENTRY_INSTRUCTION_LEN, - vmx->vcpu.arch.event_exit_inst_len); - } else - intr |= INTR_TYPE_EXT_INTR; - vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, intr); - - vmx_clear_hlt(vcpu); -} - -static void vmx_inject_nmi(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - - if (!enable_vnmi) { - /* - * Tracking the NMI-blocked state in software is built upon - * finding the next open IRQ window. This, in turn, depends on - * well-behaving guests: They have to keep IRQs disabled at - * least as long as the NMI handler runs. Otherwise we may - * cause NMI nesting, maybe breaking the guest. But as this is - * highly unlikely, we can live with the residual risk. - */ - vmx->loaded_vmcs->soft_vnmi_blocked = 1; - vmx->loaded_vmcs->vnmi_blocked_time = 0; - } - - ++vcpu->stat.nmi_injections; - vmx->loaded_vmcs->nmi_known_unmasked = false; - - if (vmx->rmode.vm86_active) { - kvm_inject_realmode_interrupt(vcpu, NMI_VECTOR, 0); - return; - } - - vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, - INTR_TYPE_NMI_INTR | INTR_INFO_VALID_MASK | NMI_VECTOR); - - vmx_clear_hlt(vcpu); -} - -bool vmx_get_nmi_mask(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - bool masked; - - if (!enable_vnmi) - return vmx->loaded_vmcs->soft_vnmi_blocked; - if (vmx->loaded_vmcs->nmi_known_unmasked) - return false; - masked = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & GUEST_INTR_STATE_NMI; - vmx->loaded_vmcs->nmi_known_unmasked = !masked; - return masked; -} - -void vmx_set_nmi_mask(struct kvm_vcpu *vcpu, bool masked) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - - if (!enable_vnmi) { - if (vmx->loaded_vmcs->soft_vnmi_blocked != masked) { - vmx->loaded_vmcs->soft_vnmi_blocked = masked; - vmx->loaded_vmcs->vnmi_blocked_time = 0; - } - } else { - vmx->loaded_vmcs->nmi_known_unmasked = !masked; - if (masked) - vmcs_set_bits(GUEST_INTERRUPTIBILITY_INFO, - GUEST_INTR_STATE_NMI); - else - vmcs_clear_bits(GUEST_INTERRUPTIBILITY_INFO, - GUEST_INTR_STATE_NMI); - } -} - -static int vmx_nmi_allowed(struct kvm_vcpu *vcpu) -{ - if (to_vmx(vcpu)->nested.nested_run_pending) - return 0; - - if (!enable_vnmi && - to_vmx(vcpu)->loaded_vmcs->soft_vnmi_blocked) - return 0; - - return !(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & - (GUEST_INTR_STATE_MOV_SS | GUEST_INTR_STATE_STI - | GUEST_INTR_STATE_NMI)); -} - -static int vmx_interrupt_allowed(struct kvm_vcpu *vcpu) -{ - return (!to_vmx(vcpu)->nested.nested_run_pending && - vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF) && - !(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & - (GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS)); -} - -static int vmx_set_tss_addr(struct kvm *kvm, unsigned int addr) -{ - int ret; - - if (enable_unrestricted_guest) - return 0; - - ret = x86_set_memory_region(kvm, TSS_PRIVATE_MEMSLOT, addr, - PAGE_SIZE * 3); - if (ret) - return ret; - to_kvm_vmx(kvm)->tss_addr = addr; - return init_rmode_tss(kvm); -} - -static int vmx_set_identity_map_addr(struct kvm *kvm, u64 ident_addr) -{ - to_kvm_vmx(kvm)->ept_identity_map_addr = ident_addr; - return 0; -} - -static bool rmode_exception(struct kvm_vcpu *vcpu, int vec) -{ - switch (vec) { - case BP_VECTOR: - /* - * Update instruction length as we may reinject the exception - * from user space while in guest debugging mode. - */ - to_vmx(vcpu)->vcpu.arch.event_exit_inst_len = - vmcs_read32(VM_EXIT_INSTRUCTION_LEN); - if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP) - return false; - /* fall through */ - case DB_VECTOR: - if (vcpu->guest_debug & - (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP)) - return false; - /* fall through */ - case DE_VECTOR: - case OF_VECTOR: - case BR_VECTOR: - case UD_VECTOR: - case DF_VECTOR: - case SS_VECTOR: - case GP_VECTOR: - case MF_VECTOR: - return true; - break; - } - return false; -} - -static int handle_rmode_exception(struct kvm_vcpu *vcpu, - int vec, u32 err_code) -{ - /* - * Instruction with address size override prefix opcode 0x67 - * Cause the #SS fault with 0 error code in VM86 mode. - */ - if (((vec == GP_VECTOR) || (vec == SS_VECTOR)) && err_code == 0) { - if (kvm_emulate_instruction(vcpu, 0)) { - if (vcpu->arch.halt_request) { - vcpu->arch.halt_request = 0; - return kvm_vcpu_halt(vcpu); - } - return 1; - } - return 0; - } - - /* - * Forward all other exceptions that are valid in real mode. - * FIXME: Breaks guest debugging in real mode, needs to be fixed with - * the required debugging infrastructure rework. - */ - kvm_queue_exception(vcpu, vec); - return 1; -} - -/* - * Trigger machine check on the host. We assume all the MSRs are already set up - * by the CPU and that we still run on the same CPU as the MCE occurred on. - * We pass a fake environment to the machine check handler because we want - * the guest to be always treated like user space, no matter what context - * it used internally. - */ -static void kvm_machine_check(void) -{ -#if defined(CONFIG_X86_MCE) && defined(CONFIG_X86_64) - struct pt_regs regs = { - .cs = 3, /* Fake ring 3 no matter what the guest ran on */ - .flags = X86_EFLAGS_IF, - }; - - do_machine_check(®s, 0); -#endif -} - -static int handle_machine_check(struct kvm_vcpu *vcpu) -{ - /* handled by vmx_vcpu_run() */ - return 1; -} - -static int handle_exception_nmi(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - struct kvm_run *kvm_run = vcpu->run; - u32 intr_info, ex_no, error_code; - unsigned long cr2, rip, dr6; - u32 vect_info; - - vect_info = vmx->idt_vectoring_info; - intr_info = vmx->exit_intr_info; - - if (is_machine_check(intr_info) || is_nmi(intr_info)) - return 1; /* handled by handle_exception_nmi_irqoff() */ - - if (is_invalid_opcode(intr_info)) - return handle_ud(vcpu); - - error_code = 0; - if (intr_info & INTR_INFO_DELIVER_CODE_MASK) - error_code = vmcs_read32(VM_EXIT_INTR_ERROR_CODE); - - if (!vmx->rmode.vm86_active && is_gp_fault(intr_info)) { - WARN_ON_ONCE(!enable_vmware_backdoor); - - /* - * VMware backdoor emulation on #GP interception only handles - * IN{S}, OUT{S}, and RDPMC, none of which generate a non-zero - * error code on #GP. - */ - if (error_code) { - kvm_queue_exception_e(vcpu, GP_VECTOR, error_code); - return 1; - } - return kvm_emulate_instruction(vcpu, EMULTYPE_VMWARE_GP); - } - - /* - * The #PF with PFEC.RSVD = 1 indicates the guest is accessing - * MMIO, it is better to report an internal error. - * See the comments in vmx_handle_exit. - */ - if ((vect_info & VECTORING_INFO_VALID_MASK) && - !(is_page_fault(intr_info) && !(error_code & PFERR_RSVD_MASK))) { - vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR; - vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_SIMUL_EX; - vcpu->run->internal.ndata = 3; - vcpu->run->internal.data[0] = vect_info; - vcpu->run->internal.data[1] = intr_info; - vcpu->run->internal.data[2] = error_code; - return 0; - } - - if (is_page_fault(intr_info)) { - cr2 = vmcs_readl(EXIT_QUALIFICATION); - /* EPT won't cause page fault directly */ - WARN_ON_ONCE(!vcpu->arch.apf.host_apf_reason && enable_ept); - return kvm_handle_page_fault(vcpu, error_code, cr2, NULL, 0); - } - - ex_no = intr_info & INTR_INFO_VECTOR_MASK; - - if (vmx->rmode.vm86_active && rmode_exception(vcpu, ex_no)) - return handle_rmode_exception(vcpu, ex_no, error_code); - - switch (ex_no) { - case AC_VECTOR: - kvm_queue_exception_e(vcpu, AC_VECTOR, error_code); - return 1; - case DB_VECTOR: - dr6 = vmcs_readl(EXIT_QUALIFICATION); - if (!(vcpu->guest_debug & - (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))) { - vcpu->arch.dr6 &= ~DR_TRAP_BITS; - vcpu->arch.dr6 |= dr6 | DR6_RTM; - if (is_icebp(intr_info)) - WARN_ON(!skip_emulated_instruction(vcpu)); - - kvm_queue_exception(vcpu, DB_VECTOR); - return 1; - } - kvm_run->debug.arch.dr6 = dr6 | DR6_FIXED_1; - kvm_run->debug.arch.dr7 = vmcs_readl(GUEST_DR7); - /* fall through */ - case BP_VECTOR: - /* - * Update instruction length as we may reinject #BP from - * user space while in guest debugging mode. Reading it for - * #DB as well causes no harm, it is not used in that case. - */ - vmx->vcpu.arch.event_exit_inst_len = - vmcs_read32(VM_EXIT_INSTRUCTION_LEN); - kvm_run->exit_reason = KVM_EXIT_DEBUG; - rip = kvm_rip_read(vcpu); - kvm_run->debug.arch.pc = vmcs_readl(GUEST_CS_BASE) + rip; - kvm_run->debug.arch.exception = ex_no; - break; - default: - kvm_run->exit_reason = KVM_EXIT_EXCEPTION; - kvm_run->ex.exception = ex_no; - kvm_run->ex.error_code = error_code; - break; - } - return 0; -} - -static __always_inline int handle_external_interrupt(struct kvm_vcpu *vcpu) -{ - ++vcpu->stat.irq_exits; - return 1; -} - -static int handle_triple_fault(struct kvm_vcpu *vcpu) -{ - vcpu->run->exit_reason = KVM_EXIT_SHUTDOWN; - vcpu->mmio_needed = 0; - return 0; -} - -static int handle_io(struct kvm_vcpu *vcpu) -{ - unsigned long exit_qualification; - int size, in, string; - unsigned port; - - exit_qualification = vmcs_readl(EXIT_QUALIFICATION); - string = (exit_qualification & 16) != 0; - - ++vcpu->stat.io_exits; - - if (string) - return kvm_emulate_instruction(vcpu, 0); - - port = exit_qualification >> 16; - size = (exit_qualification & 7) + 1; - in = (exit_qualification & 8) != 0; - - return kvm_fast_pio(vcpu, size, port, in); -} - -static void -vmx_patch_hypercall(struct kvm_vcpu *vcpu, unsigned char *hypercall) -{ - /* - * Patch in the VMCALL instruction: - */ - hypercall[0] = 0x0f; - hypercall[1] = 0x01; - hypercall[2] = 0xc1; -} - -/* called to set cr0 as appropriate for a mov-to-cr0 exit. */ -static int handle_set_cr0(struct kvm_vcpu *vcpu, unsigned long val) -{ - if (is_guest_mode(vcpu)) { - struct vmcs12 *vmcs12 = get_vmcs12(vcpu); - unsigned long orig_val = val; - - /* - * We get here when L2 changed cr0 in a way that did not change - * any of L1's shadowed bits (see nested_vmx_exit_handled_cr), - * but did change L0 shadowed bits. So we first calculate the - * effective cr0 value that L1 would like to write into the - * hardware. It consists of the L2-owned bits from the new - * value combined with the L1-owned bits from L1's guest_cr0. - */ - val = (val & ~vmcs12->cr0_guest_host_mask) | - (vmcs12->guest_cr0 & vmcs12->cr0_guest_host_mask); - - if (!nested_guest_cr0_valid(vcpu, val)) - return 1; - - if (kvm_set_cr0(vcpu, val)) - return 1; - vmcs_writel(CR0_READ_SHADOW, orig_val); - return 0; - } else { - if (to_vmx(vcpu)->nested.vmxon && - !nested_host_cr0_valid(vcpu, val)) - return 1; - - return kvm_set_cr0(vcpu, val); - } -} - -static int handle_set_cr4(struct kvm_vcpu *vcpu, unsigned long val) -{ - if (is_guest_mode(vcpu)) { - struct vmcs12 *vmcs12 = get_vmcs12(vcpu); - unsigned long orig_val = val; - - /* analogously to handle_set_cr0 */ - val = (val & ~vmcs12->cr4_guest_host_mask) | - (vmcs12->guest_cr4 & vmcs12->cr4_guest_host_mask); - if (kvm_set_cr4(vcpu, val)) - return 1; - vmcs_writel(CR4_READ_SHADOW, orig_val); - return 0; - } else - return kvm_set_cr4(vcpu, val); -} - -static int handle_desc(struct kvm_vcpu *vcpu) -{ - WARN_ON(!(vcpu->arch.cr4 & X86_CR4_UMIP)); - return kvm_emulate_instruction(vcpu, 0); -} - -static int handle_cr(struct kvm_vcpu *vcpu) -{ - unsigned long exit_qualification, val; - int cr; - int reg; - int err; - int ret; - - exit_qualification = vmcs_readl(EXIT_QUALIFICATION); - cr = exit_qualification & 15; - reg = (exit_qualification >> 8) & 15; - switch ((exit_qualification >> 4) & 3) { - case 0: /* mov to cr */ - val = kvm_register_readl(vcpu, reg); - trace_kvm_cr_write(cr, val); - switch (cr) { - case 0: - err = handle_set_cr0(vcpu, val); - return kvm_complete_insn_gp(vcpu, err); - case 3: - WARN_ON_ONCE(enable_unrestricted_guest); - err = kvm_set_cr3(vcpu, val); - return kvm_complete_insn_gp(vcpu, err); - case 4: - err = handle_set_cr4(vcpu, val); - return kvm_complete_insn_gp(vcpu, err); - case 8: { - u8 cr8_prev = kvm_get_cr8(vcpu); - u8 cr8 = (u8)val; - err = kvm_set_cr8(vcpu, cr8); - ret = kvm_complete_insn_gp(vcpu, err); - if (lapic_in_kernel(vcpu)) - return ret; - if (cr8_prev <= cr8) - return ret; - /* - * TODO: we might be squashing a - * KVM_GUESTDBG_SINGLESTEP-triggered - * KVM_EXIT_DEBUG here. - */ - vcpu->run->exit_reason = KVM_EXIT_SET_TPR; - return 0; - } - } - break; - case 2: /* clts */ - WARN_ONCE(1, "Guest should always own CR0.TS"); - vmx_set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~X86_CR0_TS)); - trace_kvm_cr_write(0, kvm_read_cr0(vcpu)); - return kvm_skip_emulated_instruction(vcpu); - case 1: /*mov from cr*/ - switch (cr) { - case 3: - WARN_ON_ONCE(enable_unrestricted_guest); - val = kvm_read_cr3(vcpu); - kvm_register_write(vcpu, reg, val); - trace_kvm_cr_read(cr, val); - return kvm_skip_emulated_instruction(vcpu); - case 8: - val = kvm_get_cr8(vcpu); - kvm_register_write(vcpu, reg, val); - trace_kvm_cr_read(cr, val); - return kvm_skip_emulated_instruction(vcpu); - } - break; - case 3: /* lmsw */ - val = (exit_qualification >> LMSW_SOURCE_DATA_SHIFT) & 0x0f; - trace_kvm_cr_write(0, (kvm_read_cr0(vcpu) & ~0xful) | val); - kvm_lmsw(vcpu, val); - - return kvm_skip_emulated_instruction(vcpu); - default: - break; - } - vcpu->run->exit_reason = 0; - vcpu_unimpl(vcpu, "unhandled control register: op %d cr %d\n", - (int)(exit_qualification >> 4) & 3, cr); - return 0; -} - -static int handle_dr(struct kvm_vcpu *vcpu) -{ - unsigned long exit_qualification; - int dr, dr7, reg; - - exit_qualification = vmcs_readl(EXIT_QUALIFICATION); - dr = exit_qualification & DEBUG_REG_ACCESS_NUM; - - /* First, if DR does not exist, trigger UD */ - if (!kvm_require_dr(vcpu, dr)) - return 1; - - /* Do not handle if the CPL > 0, will trigger GP on re-entry */ - if (!kvm_require_cpl(vcpu, 0)) - return 1; - dr7 = vmcs_readl(GUEST_DR7); - if (dr7 & DR7_GD) { - /* - * As the vm-exit takes precedence over the debug trap, we - * need to emulate the latter, either for the host or the - * guest debugging itself. - */ - if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP) { - vcpu->run->debug.arch.dr6 = vcpu->arch.dr6; - vcpu->run->debug.arch.dr7 = dr7; - vcpu->run->debug.arch.pc = kvm_get_linear_rip(vcpu); - vcpu->run->debug.arch.exception = DB_VECTOR; - vcpu->run->exit_reason = KVM_EXIT_DEBUG; - return 0; - } else { - vcpu->arch.dr6 &= ~DR_TRAP_BITS; - vcpu->arch.dr6 |= DR6_BD | DR6_RTM; - kvm_queue_exception(vcpu, DB_VECTOR); - return 1; - } - } - - if (vcpu->guest_debug == 0) { - exec_controls_clearbit(to_vmx(vcpu), CPU_BASED_MOV_DR_EXITING); - - /* - * No more DR vmexits; force a reload of the debug registers - * and reenter on this instruction. The next vmexit will - * retrieve the full state of the debug registers. - */ - vcpu->arch.switch_db_regs |= KVM_DEBUGREG_WONT_EXIT; - return 1; - } - - reg = DEBUG_REG_ACCESS_REG(exit_qualification); - if (exit_qualification & TYPE_MOV_FROM_DR) { - unsigned long val; - - if (kvm_get_dr(vcpu, dr, &val)) - return 1; - kvm_register_write(vcpu, reg, val); - } else - if (kvm_set_dr(vcpu, dr, kvm_register_readl(vcpu, reg))) - return 1; - - return kvm_skip_emulated_instruction(vcpu); -} - -static u64 vmx_get_dr6(struct kvm_vcpu *vcpu) -{ - return vcpu->arch.dr6; -} - -static void vmx_set_dr6(struct kvm_vcpu *vcpu, unsigned long val) -{ -} - -static void vmx_sync_dirty_debug_regs(struct kvm_vcpu *vcpu) -{ - get_debugreg(vcpu->arch.db[0], 0); - get_debugreg(vcpu->arch.db[1], 1); - get_debugreg(vcpu->arch.db[2], 2); - get_debugreg(vcpu->arch.db[3], 3); - get_debugreg(vcpu->arch.dr6, 6); - vcpu->arch.dr7 = vmcs_readl(GUEST_DR7); - - vcpu->arch.switch_db_regs &= ~KVM_DEBUGREG_WONT_EXIT; - exec_controls_setbit(to_vmx(vcpu), CPU_BASED_MOV_DR_EXITING); -} - -static void vmx_set_dr7(struct kvm_vcpu *vcpu, unsigned long val) -{ - vmcs_writel(GUEST_DR7, val); -} - -static int handle_tpr_below_threshold(struct kvm_vcpu *vcpu) -{ - kvm_apic_update_ppr(vcpu); - return 1; -} - -static int handle_interrupt_window(struct kvm_vcpu *vcpu) -{ - exec_controls_clearbit(to_vmx(vcpu), CPU_BASED_INTR_WINDOW_EXITING); - - kvm_make_request(KVM_REQ_EVENT, vcpu); - - ++vcpu->stat.irq_window_exits; - return 1; -} - -static int handle_vmcall(struct kvm_vcpu *vcpu) -{ - return kvm_emulate_hypercall(vcpu); -} - -static int handle_invd(struct kvm_vcpu *vcpu) -{ - return kvm_emulate_instruction(vcpu, 0); -} - -static int handle_invlpg(struct kvm_vcpu *vcpu) -{ - unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION); - - kvm_mmu_invlpg(vcpu, exit_qualification); - return kvm_skip_emulated_instruction(vcpu); -} - -static int handle_rdpmc(struct kvm_vcpu *vcpu) -{ - int err; - - err = kvm_rdpmc(vcpu); - return kvm_complete_insn_gp(vcpu, err); -} - -static int handle_wbinvd(struct kvm_vcpu *vcpu) -{ - return kvm_emulate_wbinvd(vcpu); -} - -static int handle_xsetbv(struct kvm_vcpu *vcpu) -{ - u64 new_bv = kvm_read_edx_eax(vcpu); - u32 index = kvm_rcx_read(vcpu); - - if (kvm_set_xcr(vcpu, index, new_bv) == 0) - return kvm_skip_emulated_instruction(vcpu); - return 1; -} - -static int handle_apic_access(struct kvm_vcpu *vcpu) -{ - if (likely(fasteoi)) { - unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION); - int access_type, offset; - - access_type = exit_qualification & APIC_ACCESS_TYPE; - offset = exit_qualification & APIC_ACCESS_OFFSET; - /* - * Sane guest uses MOV to write EOI, with written value - * not cared. So make a short-circuit here by avoiding - * heavy instruction emulation. - */ - if ((access_type == TYPE_LINEAR_APIC_INST_WRITE) && - (offset == APIC_EOI)) { - kvm_lapic_set_eoi(vcpu); - return kvm_skip_emulated_instruction(vcpu); - } - } - return kvm_emulate_instruction(vcpu, 0); -} - -static int handle_apic_eoi_induced(struct kvm_vcpu *vcpu) -{ - unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION); - int vector = exit_qualification & 0xff; - - /* EOI-induced VM exit is trap-like and thus no need to adjust IP */ - kvm_apic_set_eoi_accelerated(vcpu, vector); - return 1; -} - -static int handle_apic_write(struct kvm_vcpu *vcpu) -{ - unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION); - u32 offset = exit_qualification & 0xfff; - - /* APIC-write VM exit is trap-like and thus no need to adjust IP */ - kvm_apic_write_nodecode(vcpu, offset); - return 1; -} - -static int handle_task_switch(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - unsigned long exit_qualification; - bool has_error_code = false; - u32 error_code = 0; - u16 tss_selector; - int reason, type, idt_v, idt_index; - - idt_v = (vmx->idt_vectoring_info & VECTORING_INFO_VALID_MASK); - idt_index = (vmx->idt_vectoring_info & VECTORING_INFO_VECTOR_MASK); - type = (vmx->idt_vectoring_info & VECTORING_INFO_TYPE_MASK); - - exit_qualification = vmcs_readl(EXIT_QUALIFICATION); - - reason = (u32)exit_qualification >> 30; - if (reason == TASK_SWITCH_GATE && idt_v) { - switch (type) { - case INTR_TYPE_NMI_INTR: - vcpu->arch.nmi_injected = false; - vmx_set_nmi_mask(vcpu, true); - break; - case INTR_TYPE_EXT_INTR: - case INTR_TYPE_SOFT_INTR: - kvm_clear_interrupt_queue(vcpu); - break; - case INTR_TYPE_HARD_EXCEPTION: - if (vmx->idt_vectoring_info & - VECTORING_INFO_DELIVER_CODE_MASK) { - has_error_code = true; - error_code = - vmcs_read32(IDT_VECTORING_ERROR_CODE); - } - /* fall through */ - case INTR_TYPE_SOFT_EXCEPTION: - kvm_clear_exception_queue(vcpu); - break; - default: - break; - } - } - tss_selector = exit_qualification; - - if (!idt_v || (type != INTR_TYPE_HARD_EXCEPTION && - type != INTR_TYPE_EXT_INTR && - type != INTR_TYPE_NMI_INTR)) - WARN_ON(!skip_emulated_instruction(vcpu)); - - /* - * TODO: What about debug traps on tss switch? - * Are we supposed to inject them and update dr6? - */ - return kvm_task_switch(vcpu, tss_selector, - type == INTR_TYPE_SOFT_INTR ? idt_index : -1, - reason, has_error_code, error_code); -} - -static int handle_ept_violation(struct kvm_vcpu *vcpu) -{ - unsigned long exit_qualification; - gpa_t gpa; - u64 error_code; - - exit_qualification = vmcs_readl(EXIT_QUALIFICATION); - - /* - * EPT violation happened while executing iret from NMI, - * "blocked by NMI" bit has to be set before next VM entry. - * There are errata that may cause this bit to not be set: - * AAK134, BY25. - */ - if (!(to_vmx(vcpu)->idt_vectoring_info & VECTORING_INFO_VALID_MASK) && - enable_vnmi && - (exit_qualification & INTR_INFO_UNBLOCK_NMI)) - vmcs_set_bits(GUEST_INTERRUPTIBILITY_INFO, GUEST_INTR_STATE_NMI); - - gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS); - trace_kvm_page_fault(gpa, exit_qualification); - - /* Is it a read fault? */ - error_code = (exit_qualification & EPT_VIOLATION_ACC_READ) - ? PFERR_USER_MASK : 0; - /* Is it a write fault? */ - error_code |= (exit_qualification & EPT_VIOLATION_ACC_WRITE) - ? PFERR_WRITE_MASK : 0; - /* Is it a fetch fault? */ - error_code |= (exit_qualification & EPT_VIOLATION_ACC_INSTR) - ? PFERR_FETCH_MASK : 0; - /* ept page table entry is present? */ - error_code |= (exit_qualification & - (EPT_VIOLATION_READABLE | EPT_VIOLATION_WRITABLE | - EPT_VIOLATION_EXECUTABLE)) - ? PFERR_PRESENT_MASK : 0; - - error_code |= (exit_qualification & 0x100) != 0 ? - PFERR_GUEST_FINAL_MASK : PFERR_GUEST_PAGE_MASK; - - vcpu->arch.exit_qualification = exit_qualification; - return kvm_mmu_page_fault(vcpu, gpa, error_code, NULL, 0); -} - -static int handle_ept_misconfig(struct kvm_vcpu *vcpu) -{ - gpa_t gpa; - - /* - * A nested guest cannot optimize MMIO vmexits, because we have an - * nGPA here instead of the required GPA. - */ - gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS); - if (!is_guest_mode(vcpu) && - !kvm_io_bus_write(vcpu, KVM_FAST_MMIO_BUS, gpa, 0, NULL)) { - trace_kvm_fast_mmio(gpa); - return kvm_skip_emulated_instruction(vcpu); - } - - return kvm_mmu_page_fault(vcpu, gpa, PFERR_RSVD_MASK, NULL, 0); -} - -static int handle_nmi_window(struct kvm_vcpu *vcpu) -{ - WARN_ON_ONCE(!enable_vnmi); - exec_controls_clearbit(to_vmx(vcpu), CPU_BASED_NMI_WINDOW_EXITING); - ++vcpu->stat.nmi_window_exits; - kvm_make_request(KVM_REQ_EVENT, vcpu); - - return 1; -} - -static int handle_invalid_guest_state(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - bool intr_window_requested; - unsigned count = 130; - - /* - * We should never reach the point where we are emulating L2 - * due to invalid guest state as that means we incorrectly - * allowed a nested VMEntry with an invalid vmcs12. - */ - WARN_ON_ONCE(vmx->emulation_required && vmx->nested.nested_run_pending); - - intr_window_requested = exec_controls_get(vmx) & - CPU_BASED_INTR_WINDOW_EXITING; - - while (vmx->emulation_required && count-- != 0) { - if (intr_window_requested && vmx_interrupt_allowed(vcpu)) - return handle_interrupt_window(&vmx->vcpu); - - if (kvm_test_request(KVM_REQ_EVENT, vcpu)) - return 1; - - if (!kvm_emulate_instruction(vcpu, 0)) - return 0; - - if (vmx->emulation_required && !vmx->rmode.vm86_active && - vcpu->arch.exception.pending) { - vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR; - vcpu->run->internal.suberror = - KVM_INTERNAL_ERROR_EMULATION; - vcpu->run->internal.ndata = 0; - return 0; - } - - if (vcpu->arch.halt_request) { - vcpu->arch.halt_request = 0; - return kvm_vcpu_halt(vcpu); - } - - /* - * Note, return 1 and not 0, vcpu_run() is responsible for - * morphing the pending signal into the proper return code. - */ - if (signal_pending(current)) - return 1; - - if (need_resched()) - schedule(); - } - - return 1; -} - -static void grow_ple_window(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - unsigned int old = vmx->ple_window; - - vmx->ple_window = __grow_ple_window(old, ple_window, - ple_window_grow, - ple_window_max); - - if (vmx->ple_window != old) { - vmx->ple_window_dirty = true; - trace_kvm_ple_window_update(vcpu->vcpu_id, - vmx->ple_window, old); - } -} - -static void shrink_ple_window(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - unsigned int old = vmx->ple_window; - - vmx->ple_window = __shrink_ple_window(old, ple_window, - ple_window_shrink, - ple_window); - - if (vmx->ple_window != old) { - vmx->ple_window_dirty = true; - trace_kvm_ple_window_update(vcpu->vcpu_id, - vmx->ple_window, old); - } -} - -/* - * Handler for POSTED_INTERRUPT_WAKEUP_VECTOR. - */ -static void wakeup_handler(void) -{ - struct kvm_vcpu *vcpu; - int cpu = smp_processor_id(); - - spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu)); - list_for_each_entry(vcpu, &per_cpu(blocked_vcpu_on_cpu, cpu), - blocked_vcpu_list) { - struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu); - - if (pi_test_on(pi_desc) == 1) - kvm_vcpu_kick(vcpu); - } - spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu)); -} - -static void vmx_enable_tdp(void) -{ - kvm_mmu_set_mask_ptes(VMX_EPT_READABLE_MASK, - enable_ept_ad_bits ? VMX_EPT_ACCESS_BIT : 0ull, - enable_ept_ad_bits ? VMX_EPT_DIRTY_BIT : 0ull, - 0ull, VMX_EPT_EXECUTABLE_MASK, - cpu_has_vmx_ept_execute_only() ? 0ull : VMX_EPT_READABLE_MASK, - VMX_EPT_RWX_MASK, 0ull); - - ept_set_mmio_spte_mask(); - kvm_enable_tdp(); -} - -/* - * Indicate a busy-waiting vcpu in spinlock. We do not enable the PAUSE - * exiting, so only get here on cpu with PAUSE-Loop-Exiting. - */ -static int handle_pause(struct kvm_vcpu *vcpu) -{ - if (!kvm_pause_in_guest(vcpu->kvm)) - grow_ple_window(vcpu); - - /* - * Intel sdm vol3 ch-25.1.3 says: The "PAUSE-loop exiting" - * VM-execution control is ignored if CPL > 0. OTOH, KVM - * never set PAUSE_EXITING and just set PLE if supported, - * so the vcpu must be CPL=0 if it gets a PAUSE exit. - */ - kvm_vcpu_on_spin(vcpu, true); - return kvm_skip_emulated_instruction(vcpu); -} - -static int handle_nop(struct kvm_vcpu *vcpu) -{ - return kvm_skip_emulated_instruction(vcpu); -} - -static int handle_mwait(struct kvm_vcpu *vcpu) -{ - printk_once(KERN_WARNING "kvm: MWAIT instruction emulated as NOP!\n"); - return handle_nop(vcpu); -} - -static int handle_invalid_op(struct kvm_vcpu *vcpu) -{ - kvm_queue_exception(vcpu, UD_VECTOR); - return 1; -} - -static int handle_monitor_trap(struct kvm_vcpu *vcpu) -{ - return 1; -} - -static int handle_monitor(struct kvm_vcpu *vcpu) -{ - printk_once(KERN_WARNING "kvm: MONITOR instruction emulated as NOP!\n"); - return handle_nop(vcpu); -} - -static int handle_invpcid(struct kvm_vcpu *vcpu) -{ - u32 vmx_instruction_info; - unsigned long type; - bool pcid_enabled; - gva_t gva; - struct x86_exception e; - unsigned i; - unsigned long roots_to_free = 0; - struct { - u64 pcid; - u64 gla; - } operand; - - if (!guest_cpuid_has(vcpu, X86_FEATURE_INVPCID)) { - kvm_queue_exception(vcpu, UD_VECTOR); - return 1; - } - - vmx_instruction_info = vmcs_read32(VMX_INSTRUCTION_INFO); - type = kvm_register_readl(vcpu, (vmx_instruction_info >> 28) & 0xf); - - if (type > 3) { - kvm_inject_gp(vcpu, 0); - return 1; - } - - /* According to the Intel instruction reference, the memory operand - * is read even if it isn't needed (e.g., for type==all) - */ - if (get_vmx_mem_address(vcpu, vmcs_readl(EXIT_QUALIFICATION), - vmx_instruction_info, false, - sizeof(operand), &gva)) - return 1; - - if (kvm_read_guest_virt(vcpu, gva, &operand, sizeof(operand), &e)) { - kvm_inject_page_fault(vcpu, &e); - return 1; - } - - if (operand.pcid >> 12 != 0) { - kvm_inject_gp(vcpu, 0); - return 1; - } - - pcid_enabled = kvm_read_cr4_bits(vcpu, X86_CR4_PCIDE); - - switch (type) { - case INVPCID_TYPE_INDIV_ADDR: - if ((!pcid_enabled && (operand.pcid != 0)) || - is_noncanonical_address(operand.gla, vcpu)) { - kvm_inject_gp(vcpu, 0); - return 1; - } - kvm_mmu_invpcid_gva(vcpu, operand.gla, operand.pcid); - return kvm_skip_emulated_instruction(vcpu); - - case INVPCID_TYPE_SINGLE_CTXT: - if (!pcid_enabled && (operand.pcid != 0)) { - kvm_inject_gp(vcpu, 0); - return 1; - } - - if (kvm_get_active_pcid(vcpu) == operand.pcid) { - kvm_mmu_sync_roots(vcpu); - kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu); - } - - for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++) - if (kvm_get_pcid(vcpu, vcpu->arch.mmu->prev_roots[i].cr3) - == operand.pcid) - roots_to_free |= KVM_MMU_ROOT_PREVIOUS(i); - - kvm_mmu_free_roots(vcpu, vcpu->arch.mmu, roots_to_free); - /* - * If neither the current cr3 nor any of the prev_roots use the - * given PCID, then nothing needs to be done here because a - * resync will happen anyway before switching to any other CR3. - */ - - return kvm_skip_emulated_instruction(vcpu); - - case INVPCID_TYPE_ALL_NON_GLOBAL: - /* - * Currently, KVM doesn't mark global entries in the shadow - * page tables, so a non-global flush just degenerates to a - * global flush. If needed, we could optimize this later by - * keeping track of global entries in shadow page tables. - */ - - /* fall-through */ - case INVPCID_TYPE_ALL_INCL_GLOBAL: - kvm_mmu_unload(vcpu); - return kvm_skip_emulated_instruction(vcpu); - - default: - BUG(); /* We have already checked above that type <= 3 */ - } -} - -static int handle_pml_full(struct kvm_vcpu *vcpu) -{ - unsigned long exit_qualification; - - trace_kvm_pml_full(vcpu->vcpu_id); - - exit_qualification = vmcs_readl(EXIT_QUALIFICATION); - - /* - * PML buffer FULL happened while executing iret from NMI, - * "blocked by NMI" bit has to be set before next VM entry. - */ - if (!(to_vmx(vcpu)->idt_vectoring_info & VECTORING_INFO_VALID_MASK) && - enable_vnmi && - (exit_qualification & INTR_INFO_UNBLOCK_NMI)) - vmcs_set_bits(GUEST_INTERRUPTIBILITY_INFO, - GUEST_INTR_STATE_NMI); - - /* - * PML buffer already flushed at beginning of VMEXIT. Nothing to do - * here.., and there's no userspace involvement needed for PML. - */ - return 1; -} - -static int handle_preemption_timer(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - - if (!vmx->req_immediate_exit && - !unlikely(vmx->loaded_vmcs->hv_timer_soft_disabled)) - kvm_lapic_expired_hv_timer(vcpu); - - return 1; -} - -/* - * When nested=0, all VMX instruction VM Exits filter here. The handlers - * are overwritten by nested_vmx_setup() when nested=1. - */ -static int handle_vmx_instruction(struct kvm_vcpu *vcpu) -{ - kvm_queue_exception(vcpu, UD_VECTOR); - return 1; -} - -static int handle_encls(struct kvm_vcpu *vcpu) -{ - /* - * SGX virtualization is not yet supported. There is no software - * enable bit for SGX, so we have to trap ENCLS and inject a #UD - * to prevent the guest from executing ENCLS. - */ - kvm_queue_exception(vcpu, UD_VECTOR); - return 1; -} - -/* - * The exit handlers return 1 if the exit was handled fully and guest execution - * may resume. Otherwise they set the kvm_run parameter to indicate what needs - * to be done to userspace and return 0. - */ -static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = { - [EXIT_REASON_EXCEPTION_NMI] = handle_exception_nmi, - [EXIT_REASON_EXTERNAL_INTERRUPT] = handle_external_interrupt, - [EXIT_REASON_TRIPLE_FAULT] = handle_triple_fault, - [EXIT_REASON_NMI_WINDOW] = handle_nmi_window, - [EXIT_REASON_IO_INSTRUCTION] = handle_io, - [EXIT_REASON_CR_ACCESS] = handle_cr, - [EXIT_REASON_DR_ACCESS] = handle_dr, - [EXIT_REASON_CPUID] = kvm_emulate_cpuid, - [EXIT_REASON_MSR_READ] = kvm_emulate_rdmsr, - [EXIT_REASON_MSR_WRITE] = kvm_emulate_wrmsr, - [EXIT_REASON_INTERRUPT_WINDOW] = handle_interrupt_window, - [EXIT_REASON_HLT] = kvm_emulate_halt, - [EXIT_REASON_INVD] = handle_invd, - [EXIT_REASON_INVLPG] = handle_invlpg, - [EXIT_REASON_RDPMC] = handle_rdpmc, - [EXIT_REASON_VMCALL] = handle_vmcall, - [EXIT_REASON_VMCLEAR] = handle_vmx_instruction, - [EXIT_REASON_VMLAUNCH] = handle_vmx_instruction, - [EXIT_REASON_VMPTRLD] = handle_vmx_instruction, - [EXIT_REASON_VMPTRST] = handle_vmx_instruction, - [EXIT_REASON_VMREAD] = handle_vmx_instruction, - [EXIT_REASON_VMRESUME] = handle_vmx_instruction, - [EXIT_REASON_VMWRITE] = handle_vmx_instruction, - [EXIT_REASON_VMOFF] = handle_vmx_instruction, - [EXIT_REASON_VMON] = handle_vmx_instruction, - [EXIT_REASON_TPR_BELOW_THRESHOLD] = handle_tpr_below_threshold, - [EXIT_REASON_APIC_ACCESS] = handle_apic_access, - [EXIT_REASON_APIC_WRITE] = handle_apic_write, - [EXIT_REASON_EOI_INDUCED] = handle_apic_eoi_induced, - [EXIT_REASON_WBINVD] = handle_wbinvd, - [EXIT_REASON_XSETBV] = handle_xsetbv, - [EXIT_REASON_TASK_SWITCH] = handle_task_switch, - [EXIT_REASON_MCE_DURING_VMENTRY] = handle_machine_check, - [EXIT_REASON_GDTR_IDTR] = handle_desc, - [EXIT_REASON_LDTR_TR] = handle_desc, - [EXIT_REASON_EPT_VIOLATION] = handle_ept_violation, - [EXIT_REASON_EPT_MISCONFIG] = handle_ept_misconfig, - [EXIT_REASON_PAUSE_INSTRUCTION] = handle_pause, - [EXIT_REASON_MWAIT_INSTRUCTION] = handle_mwait, - [EXIT_REASON_MONITOR_TRAP_FLAG] = handle_monitor_trap, - [EXIT_REASON_MONITOR_INSTRUCTION] = handle_monitor, - [EXIT_REASON_INVEPT] = handle_vmx_instruction, - [EXIT_REASON_INVVPID] = handle_vmx_instruction, - [EXIT_REASON_RDRAND] = handle_invalid_op, - [EXIT_REASON_RDSEED] = handle_invalid_op, - [EXIT_REASON_PML_FULL] = handle_pml_full, - [EXIT_REASON_INVPCID] = handle_invpcid, - [EXIT_REASON_VMFUNC] = handle_vmx_instruction, - [EXIT_REASON_PREEMPTION_TIMER] = handle_preemption_timer, - [EXIT_REASON_ENCLS] = handle_encls, -}; - -static const int kvm_vmx_max_exit_handlers = - ARRAY_SIZE(kvm_vmx_exit_handlers); - -static void vmx_get_exit_info(struct kvm_vcpu *vcpu, u64 *info1, u64 *info2) -{ - *info1 = vmcs_readl(EXIT_QUALIFICATION); - *info2 = vmcs_read32(VM_EXIT_INTR_INFO); -} - -static void vmx_destroy_pml_buffer(struct vcpu_vmx *vmx) -{ - if (vmx->pml_pg) { - __free_page(vmx->pml_pg); - vmx->pml_pg = NULL; - } -} - -static void vmx_flush_pml_buffer(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - u64 *pml_buf; - u16 pml_idx; - - pml_idx = vmcs_read16(GUEST_PML_INDEX); - - /* Do nothing if PML buffer is empty */ - if (pml_idx == (PML_ENTITY_NUM - 1)) - return; - - /* PML index always points to next available PML buffer entity */ - if (pml_idx >= PML_ENTITY_NUM) - pml_idx = 0; - else - pml_idx++; - - pml_buf = page_address(vmx->pml_pg); - for (; pml_idx < PML_ENTITY_NUM; pml_idx++) { - u64 gpa; - - gpa = pml_buf[pml_idx]; - WARN_ON(gpa & (PAGE_SIZE - 1)); - kvm_vcpu_mark_page_dirty(vcpu, gpa >> PAGE_SHIFT); - } - - /* reset PML index */ - vmcs_write16(GUEST_PML_INDEX, PML_ENTITY_NUM - 1); -} - -/* - * Flush all vcpus' PML buffer and update logged GPAs to dirty_bitmap. - * Called before reporting dirty_bitmap to userspace. - */ -static void kvm_flush_pml_buffers(struct kvm *kvm) -{ - int i; - struct kvm_vcpu *vcpu; - /* - * We only need to kick vcpu out of guest mode here, as PML buffer - * is flushed at beginning of all VMEXITs, and it's obvious that only - * vcpus running in guest are possible to have unflushed GPAs in PML - * buffer. - */ - kvm_for_each_vcpu(i, vcpu, kvm) - kvm_vcpu_kick(vcpu); -} - -static void vmx_dump_sel(char *name, uint32_t sel) -{ - pr_err("%s sel=0x%04x, attr=0x%05x, limit=0x%08x, base=0x%016lx\n", - name, vmcs_read16(sel), - vmcs_read32(sel + GUEST_ES_AR_BYTES - GUEST_ES_SELECTOR), - vmcs_read32(sel + GUEST_ES_LIMIT - GUEST_ES_SELECTOR), - vmcs_readl(sel + GUEST_ES_BASE - GUEST_ES_SELECTOR)); -} - -static void vmx_dump_dtsel(char *name, uint32_t limit) -{ - pr_err("%s limit=0x%08x, base=0x%016lx\n", - name, vmcs_read32(limit), - vmcs_readl(limit + GUEST_GDTR_BASE - GUEST_GDTR_LIMIT)); -} - -void dump_vmcs(void) -{ - u32 vmentry_ctl, vmexit_ctl; - u32 cpu_based_exec_ctrl, pin_based_exec_ctrl, secondary_exec_control; - unsigned long cr4; - u64 efer; - int i, n; - - if (!dump_invalid_vmcs) { - pr_warn_ratelimited("set kvm_intel.dump_invalid_vmcs=1 to dump internal KVM state.\n"); - return; - } - - vmentry_ctl = vmcs_read32(VM_ENTRY_CONTROLS); - vmexit_ctl = vmcs_read32(VM_EXIT_CONTROLS); - cpu_based_exec_ctrl = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL); - pin_based_exec_ctrl = vmcs_read32(PIN_BASED_VM_EXEC_CONTROL); - cr4 = vmcs_readl(GUEST_CR4); - efer = vmcs_read64(GUEST_IA32_EFER); - secondary_exec_control = 0; - if (cpu_has_secondary_exec_ctrls()) - secondary_exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL); - - pr_err("*** Guest State ***\n"); - pr_err("CR0: actual=0x%016lx, shadow=0x%016lx, gh_mask=%016lx\n", - vmcs_readl(GUEST_CR0), vmcs_readl(CR0_READ_SHADOW), - vmcs_readl(CR0_GUEST_HOST_MASK)); - pr_err("CR4: actual=0x%016lx, shadow=0x%016lx, gh_mask=%016lx\n", - cr4, vmcs_readl(CR4_READ_SHADOW), vmcs_readl(CR4_GUEST_HOST_MASK)); - pr_err("CR3 = 0x%016lx\n", vmcs_readl(GUEST_CR3)); - if ((secondary_exec_control & SECONDARY_EXEC_ENABLE_EPT) && - (cr4 & X86_CR4_PAE) && !(efer & EFER_LMA)) - { - pr_err("PDPTR0 = 0x%016llx PDPTR1 = 0x%016llx\n", - vmcs_read64(GUEST_PDPTR0), vmcs_read64(GUEST_PDPTR1)); - pr_err("PDPTR2 = 0x%016llx PDPTR3 = 0x%016llx\n", - vmcs_read64(GUEST_PDPTR2), vmcs_read64(GUEST_PDPTR3)); - } - pr_err("RSP = 0x%016lx RIP = 0x%016lx\n", - vmcs_readl(GUEST_RSP), vmcs_readl(GUEST_RIP)); - pr_err("RFLAGS=0x%08lx DR7 = 0x%016lx\n", - vmcs_readl(GUEST_RFLAGS), vmcs_readl(GUEST_DR7)); - pr_err("Sysenter RSP=%016lx CS:RIP=%04x:%016lx\n", - vmcs_readl(GUEST_SYSENTER_ESP), - vmcs_read32(GUEST_SYSENTER_CS), vmcs_readl(GUEST_SYSENTER_EIP)); - vmx_dump_sel("CS: ", GUEST_CS_SELECTOR); - vmx_dump_sel("DS: ", GUEST_DS_SELECTOR); - vmx_dump_sel("SS: ", GUEST_SS_SELECTOR); - vmx_dump_sel("ES: ", GUEST_ES_SELECTOR); - vmx_dump_sel("FS: ", GUEST_FS_SELECTOR); - vmx_dump_sel("GS: ", GUEST_GS_SELECTOR); - vmx_dump_dtsel("GDTR:", GUEST_GDTR_LIMIT); - vmx_dump_sel("LDTR:", GUEST_LDTR_SELECTOR); - vmx_dump_dtsel("IDTR:", GUEST_IDTR_LIMIT); - vmx_dump_sel("TR: ", GUEST_TR_SELECTOR); - if ((vmexit_ctl & (VM_EXIT_SAVE_IA32_PAT | VM_EXIT_SAVE_IA32_EFER)) || - (vmentry_ctl & (VM_ENTRY_LOAD_IA32_PAT | VM_ENTRY_LOAD_IA32_EFER))) - pr_err("EFER = 0x%016llx PAT = 0x%016llx\n", - efer, vmcs_read64(GUEST_IA32_PAT)); - pr_err("DebugCtl = 0x%016llx DebugExceptions = 0x%016lx\n", - vmcs_read64(GUEST_IA32_DEBUGCTL), - vmcs_readl(GUEST_PENDING_DBG_EXCEPTIONS)); - if (cpu_has_load_perf_global_ctrl() && - vmentry_ctl & VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL) - pr_err("PerfGlobCtl = 0x%016llx\n", - vmcs_read64(GUEST_IA32_PERF_GLOBAL_CTRL)); - if (vmentry_ctl & VM_ENTRY_LOAD_BNDCFGS) - pr_err("BndCfgS = 0x%016llx\n", vmcs_read64(GUEST_BNDCFGS)); - pr_err("Interruptibility = %08x ActivityState = %08x\n", - vmcs_read32(GUEST_INTERRUPTIBILITY_INFO), - vmcs_read32(GUEST_ACTIVITY_STATE)); - if (secondary_exec_control & SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY) - pr_err("InterruptStatus = %04x\n", - vmcs_read16(GUEST_INTR_STATUS)); - - pr_err("*** Host State ***\n"); - pr_err("RIP = 0x%016lx RSP = 0x%016lx\n", - vmcs_readl(HOST_RIP), vmcs_readl(HOST_RSP)); - pr_err("CS=%04x SS=%04x DS=%04x ES=%04x FS=%04x GS=%04x TR=%04x\n", - vmcs_read16(HOST_CS_SELECTOR), vmcs_read16(HOST_SS_SELECTOR), - vmcs_read16(HOST_DS_SELECTOR), vmcs_read16(HOST_ES_SELECTOR), - vmcs_read16(HOST_FS_SELECTOR), vmcs_read16(HOST_GS_SELECTOR), - vmcs_read16(HOST_TR_SELECTOR)); - pr_err("FSBase=%016lx GSBase=%016lx TRBase=%016lx\n", - vmcs_readl(HOST_FS_BASE), vmcs_readl(HOST_GS_BASE), - vmcs_readl(HOST_TR_BASE)); - pr_err("GDTBase=%016lx IDTBase=%016lx\n", - vmcs_readl(HOST_GDTR_BASE), vmcs_readl(HOST_IDTR_BASE)); - pr_err("CR0=%016lx CR3=%016lx CR4=%016lx\n", - vmcs_readl(HOST_CR0), vmcs_readl(HOST_CR3), - vmcs_readl(HOST_CR4)); - pr_err("Sysenter RSP=%016lx CS:RIP=%04x:%016lx\n", - vmcs_readl(HOST_IA32_SYSENTER_ESP), - vmcs_read32(HOST_IA32_SYSENTER_CS), - vmcs_readl(HOST_IA32_SYSENTER_EIP)); - if (vmexit_ctl & (VM_EXIT_LOAD_IA32_PAT | VM_EXIT_LOAD_IA32_EFER)) - pr_err("EFER = 0x%016llx PAT = 0x%016llx\n", - vmcs_read64(HOST_IA32_EFER), - vmcs_read64(HOST_IA32_PAT)); - if (cpu_has_load_perf_global_ctrl() && - vmexit_ctl & VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL) - pr_err("PerfGlobCtl = 0x%016llx\n", - vmcs_read64(HOST_IA32_PERF_GLOBAL_CTRL)); - - pr_err("*** Control State ***\n"); - pr_err("PinBased=%08x CPUBased=%08x SecondaryExec=%08x\n", - pin_based_exec_ctrl, cpu_based_exec_ctrl, secondary_exec_control); - pr_err("EntryControls=%08x ExitControls=%08x\n", vmentry_ctl, vmexit_ctl); - pr_err("ExceptionBitmap=%08x PFECmask=%08x PFECmatch=%08x\n", - vmcs_read32(EXCEPTION_BITMAP), - vmcs_read32(PAGE_FAULT_ERROR_CODE_MASK), - vmcs_read32(PAGE_FAULT_ERROR_CODE_MATCH)); - pr_err("VMEntry: intr_info=%08x errcode=%08x ilen=%08x\n", - vmcs_read32(VM_ENTRY_INTR_INFO_FIELD), - vmcs_read32(VM_ENTRY_EXCEPTION_ERROR_CODE), - vmcs_read32(VM_ENTRY_INSTRUCTION_LEN)); - pr_err("VMExit: intr_info=%08x errcode=%08x ilen=%08x\n", - vmcs_read32(VM_EXIT_INTR_INFO), - vmcs_read32(VM_EXIT_INTR_ERROR_CODE), - vmcs_read32(VM_EXIT_INSTRUCTION_LEN)); - pr_err(" reason=%08x qualification=%016lx\n", - vmcs_read32(VM_EXIT_REASON), vmcs_readl(EXIT_QUALIFICATION)); - pr_err("IDTVectoring: info=%08x errcode=%08x\n", - vmcs_read32(IDT_VECTORING_INFO_FIELD), - vmcs_read32(IDT_VECTORING_ERROR_CODE)); - pr_err("TSC Offset = 0x%016llx\n", vmcs_read64(TSC_OFFSET)); - if (secondary_exec_control & SECONDARY_EXEC_TSC_SCALING) - pr_err("TSC Multiplier = 0x%016llx\n", - vmcs_read64(TSC_MULTIPLIER)); - if (cpu_based_exec_ctrl & CPU_BASED_TPR_SHADOW) { - if (secondary_exec_control & SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY) { - u16 status = vmcs_read16(GUEST_INTR_STATUS); - pr_err("SVI|RVI = %02x|%02x ", status >> 8, status & 0xff); - } - pr_cont("TPR Threshold = 0x%02x\n", vmcs_read32(TPR_THRESHOLD)); - if (secondary_exec_control & SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES) - pr_err("APIC-access addr = 0x%016llx ", vmcs_read64(APIC_ACCESS_ADDR)); - pr_cont("virt-APIC addr = 0x%016llx\n", vmcs_read64(VIRTUAL_APIC_PAGE_ADDR)); - } - if (pin_based_exec_ctrl & PIN_BASED_POSTED_INTR) - pr_err("PostedIntrVec = 0x%02x\n", vmcs_read16(POSTED_INTR_NV)); - if ((secondary_exec_control & SECONDARY_EXEC_ENABLE_EPT)) - pr_err("EPT pointer = 0x%016llx\n", vmcs_read64(EPT_POINTER)); - n = vmcs_read32(CR3_TARGET_COUNT); - for (i = 0; i + 1 < n; i += 4) - pr_err("CR3 target%u=%016lx target%u=%016lx\n", - i, vmcs_readl(CR3_TARGET_VALUE0 + i * 2), - i + 1, vmcs_readl(CR3_TARGET_VALUE0 + i * 2 + 2)); - if (i < n) - pr_err("CR3 target%u=%016lx\n", - i, vmcs_readl(CR3_TARGET_VALUE0 + i * 2)); - if (secondary_exec_control & SECONDARY_EXEC_PAUSE_LOOP_EXITING) - pr_err("PLE Gap=%08x Window=%08x\n", - vmcs_read32(PLE_GAP), vmcs_read32(PLE_WINDOW)); - if (secondary_exec_control & SECONDARY_EXEC_ENABLE_VPID) - pr_err("Virtual processor ID = 0x%04x\n", - vmcs_read16(VIRTUAL_PROCESSOR_ID)); -} - -/* - * The guest has exited. See if we can fix it or if we need userspace - * assistance. - */ -static int vmx_handle_exit(struct kvm_vcpu *vcpu, - enum exit_fastpath_completion exit_fastpath) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - u32 exit_reason = vmx->exit_reason; - u32 vectoring_info = vmx->idt_vectoring_info; - - trace_kvm_exit(exit_reason, vcpu, KVM_ISA_VMX); - - /* - * Flush logged GPAs PML buffer, this will make dirty_bitmap more - * updated. Another good is, in kvm_vm_ioctl_get_dirty_log, before - * querying dirty_bitmap, we only need to kick all vcpus out of guest - * mode as if vcpus is in root mode, the PML buffer must has been - * flushed already. - */ - if (enable_pml) - vmx_flush_pml_buffer(vcpu); - - /* If guest state is invalid, start emulating */ - if (vmx->emulation_required) - return handle_invalid_guest_state(vcpu); - - if (is_guest_mode(vcpu) && nested_vmx_exit_reflected(vcpu, exit_reason)) - return nested_vmx_reflect_vmexit(vcpu, exit_reason); - - if (exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY) { - dump_vmcs(); - vcpu->run->exit_reason = KVM_EXIT_FAIL_ENTRY; - vcpu->run->fail_entry.hardware_entry_failure_reason - = exit_reason; - return 0; - } - - if (unlikely(vmx->fail)) { - dump_vmcs(); - vcpu->run->exit_reason = KVM_EXIT_FAIL_ENTRY; - vcpu->run->fail_entry.hardware_entry_failure_reason - = vmcs_read32(VM_INSTRUCTION_ERROR); - return 0; - } - - /* - * Note: - * Do not try to fix EXIT_REASON_EPT_MISCONFIG if it caused by - * delivery event since it indicates guest is accessing MMIO. - * The vm-exit can be triggered again after return to guest that - * will cause infinite loop. - */ - if ((vectoring_info & VECTORING_INFO_VALID_MASK) && - (exit_reason != EXIT_REASON_EXCEPTION_NMI && - exit_reason != EXIT_REASON_EPT_VIOLATION && - exit_reason != EXIT_REASON_PML_FULL && - exit_reason != EXIT_REASON_TASK_SWITCH)) { - vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR; - vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_DELIVERY_EV; - vcpu->run->internal.ndata = 3; - vcpu->run->internal.data[0] = vectoring_info; - vcpu->run->internal.data[1] = exit_reason; - vcpu->run->internal.data[2] = vcpu->arch.exit_qualification; - if (exit_reason == EXIT_REASON_EPT_MISCONFIG) { - vcpu->run->internal.ndata++; - vcpu->run->internal.data[3] = - vmcs_read64(GUEST_PHYSICAL_ADDRESS); - } - return 0; - } - - if (unlikely(!enable_vnmi && - vmx->loaded_vmcs->soft_vnmi_blocked)) { - if (vmx_interrupt_allowed(vcpu)) { - vmx->loaded_vmcs->soft_vnmi_blocked = 0; - } else if (vmx->loaded_vmcs->vnmi_blocked_time > 1000000000LL && - vcpu->arch.nmi_pending) { - /* - * This CPU don't support us in finding the end of an - * NMI-blocked window if the guest runs with IRQs - * disabled. So we pull the trigger after 1 s of - * futile waiting, but inform the user about this. - */ - printk(KERN_WARNING "%s: Breaking out of NMI-blocked " - "state on VCPU %d after 1 s timeout\n", - __func__, vcpu->vcpu_id); - vmx->loaded_vmcs->soft_vnmi_blocked = 0; - } - } - - if (exit_fastpath == EXIT_FASTPATH_SKIP_EMUL_INS) { - kvm_skip_emulated_instruction(vcpu); - return 1; - } else if (exit_reason < kvm_vmx_max_exit_handlers - && kvm_vmx_exit_handlers[exit_reason]) { -#ifdef CONFIG_RETPOLINE - if (exit_reason == EXIT_REASON_MSR_WRITE) - return kvm_emulate_wrmsr(vcpu); - else if (exit_reason == EXIT_REASON_PREEMPTION_TIMER) - return handle_preemption_timer(vcpu); - else if (exit_reason == EXIT_REASON_INTERRUPT_WINDOW) - return handle_interrupt_window(vcpu); - else if (exit_reason == EXIT_REASON_EXTERNAL_INTERRUPT) - return handle_external_interrupt(vcpu); - else if (exit_reason == EXIT_REASON_HLT) - return kvm_emulate_halt(vcpu); - else if (exit_reason == EXIT_REASON_EPT_MISCONFIG) - return handle_ept_misconfig(vcpu); -#endif - return kvm_vmx_exit_handlers[exit_reason](vcpu); - } else { - vcpu_unimpl(vcpu, "vmx: unexpected exit reason 0x%x\n", - exit_reason); - dump_vmcs(); - vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR; - vcpu->run->internal.suberror = - KVM_INTERNAL_ERROR_UNEXPECTED_EXIT_REASON; - vcpu->run->internal.ndata = 1; - vcpu->run->internal.data[0] = exit_reason; - return 0; - } -} - -/* - * Software based L1D cache flush which is used when microcode providing - * the cache control MSR is not loaded. - * - * The L1D cache is 32 KiB on Nehalem and later microarchitectures, but to - * flush it is required to read in 64 KiB because the replacement algorithm - * is not exactly LRU. This could be sized at runtime via topology - * information but as all relevant affected CPUs have 32KiB L1D cache size - * there is no point in doing so. - */ -static void vmx_l1d_flush(struct kvm_vcpu *vcpu) -{ - int size = PAGE_SIZE << L1D_CACHE_ORDER; - - /* - * This code is only executed when the the flush mode is 'cond' or - * 'always' - */ - if (static_branch_likely(&vmx_l1d_flush_cond)) { - bool flush_l1d; - - /* - * Clear the per-vcpu flush bit, it gets set again - * either from vcpu_run() or from one of the unsafe - * VMEXIT handlers. - */ - flush_l1d = vcpu->arch.l1tf_flush_l1d; - vcpu->arch.l1tf_flush_l1d = false; - - /* - * Clear the per-cpu flush bit, it gets set again from - * the interrupt handlers. - */ - flush_l1d |= kvm_get_cpu_l1tf_flush_l1d(); - kvm_clear_cpu_l1tf_flush_l1d(); - - if (!flush_l1d) - return; - } - - vcpu->stat.l1d_flush++; - - if (static_cpu_has(X86_FEATURE_FLUSH_L1D)) { - wrmsrl(MSR_IA32_FLUSH_CMD, L1D_FLUSH); - return; - } - - asm volatile( - /* First ensure the pages are in the TLB */ - "xorl %%eax, %%eax\n" - ".Lpopulate_tlb:\n\t" - "movzbl (%[flush_pages], %%" _ASM_AX "), %%ecx\n\t" - "addl $4096, %%eax\n\t" - "cmpl %%eax, %[size]\n\t" - "jne .Lpopulate_tlb\n\t" - "xorl %%eax, %%eax\n\t" - "cpuid\n\t" - /* Now fill the cache */ - "xorl %%eax, %%eax\n" - ".Lfill_cache:\n" - "movzbl (%[flush_pages], %%" _ASM_AX "), %%ecx\n\t" - "addl $64, %%eax\n\t" - "cmpl %%eax, %[size]\n\t" - "jne .Lfill_cache\n\t" - "lfence\n" - :: [flush_pages] "r" (vmx_l1d_flush_pages), - [size] "r" (size) - : "eax", "ebx", "ecx", "edx"); -} - -static void update_cr8_intercept(struct kvm_vcpu *vcpu, int tpr, int irr) -{ - struct vmcs12 *vmcs12 = get_vmcs12(vcpu); - int tpr_threshold; - - if (is_guest_mode(vcpu) && - nested_cpu_has(vmcs12, CPU_BASED_TPR_SHADOW)) - return; - - tpr_threshold = (irr == -1 || tpr < irr) ? 0 : irr; - if (is_guest_mode(vcpu)) - to_vmx(vcpu)->nested.l1_tpr_threshold = tpr_threshold; - else - vmcs_write32(TPR_THRESHOLD, tpr_threshold); -} - -void vmx_set_virtual_apic_mode(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - u32 sec_exec_control; - - if (!lapic_in_kernel(vcpu)) - return; - - if (!flexpriority_enabled && - !cpu_has_vmx_virtualize_x2apic_mode()) - return; - - /* Postpone execution until vmcs01 is the current VMCS. */ - if (is_guest_mode(vcpu)) { - vmx->nested.change_vmcs01_virtual_apic_mode = true; - return; - } - - sec_exec_control = secondary_exec_controls_get(vmx); - sec_exec_control &= ~(SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES | - SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE); - - switch (kvm_get_apic_mode(vcpu)) { - case LAPIC_MODE_INVALID: - WARN_ONCE(true, "Invalid local APIC state"); - case LAPIC_MODE_DISABLED: - break; - case LAPIC_MODE_XAPIC: - if (flexpriority_enabled) { - sec_exec_control |= - SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES; - vmx_flush_tlb(vcpu, true); - } - break; - case LAPIC_MODE_X2APIC: - if (cpu_has_vmx_virtualize_x2apic_mode()) - sec_exec_control |= - SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE; - break; - } - secondary_exec_controls_set(vmx, sec_exec_control); - - vmx_update_msr_bitmap(vcpu); -} - -static void vmx_set_apic_access_page_addr(struct kvm_vcpu *vcpu, hpa_t hpa) -{ - if (!is_guest_mode(vcpu)) { - vmcs_write64(APIC_ACCESS_ADDR, hpa); - vmx_flush_tlb(vcpu, true); - } -} - -static void vmx_hwapic_isr_update(struct kvm_vcpu *vcpu, int max_isr) -{ - u16 status; - u8 old; - - if (max_isr == -1) - max_isr = 0; - - status = vmcs_read16(GUEST_INTR_STATUS); - old = status >> 8; - if (max_isr != old) { - status &= 0xff; - status |= max_isr << 8; - vmcs_write16(GUEST_INTR_STATUS, status); - } -} - -static void vmx_set_rvi(int vector) -{ - u16 status; - u8 old; - - if (vector == -1) - vector = 0; - - status = vmcs_read16(GUEST_INTR_STATUS); - old = (u8)status & 0xff; - if ((u8)vector != old) { - status &= ~0xff; - status |= (u8)vector; - vmcs_write16(GUEST_INTR_STATUS, status); - } -} - -static void vmx_hwapic_irr_update(struct kvm_vcpu *vcpu, int max_irr) -{ - /* - * When running L2, updating RVI is only relevant when - * vmcs12 virtual-interrupt-delivery enabled. - * However, it can be enabled only when L1 also - * intercepts external-interrupts and in that case - * we should not update vmcs02 RVI but instead intercept - * interrupt. Therefore, do nothing when running L2. - */ - if (!is_guest_mode(vcpu)) - vmx_set_rvi(max_irr); -} - -static int vmx_sync_pir_to_irr(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - int max_irr; - bool max_irr_updated; - - WARN_ON(!vcpu->arch.apicv_active); - if (pi_test_on(&vmx->pi_desc)) { - pi_clear_on(&vmx->pi_desc); - /* - * IOMMU can write to PID.ON, so the barrier matters even on UP. - * But on x86 this is just a compiler barrier anyway. - */ - smp_mb__after_atomic(); - max_irr_updated = - kvm_apic_update_irr(vcpu, vmx->pi_desc.pir, &max_irr); - - /* - * If we are running L2 and L1 has a new pending interrupt - * which can be injected, we should re-evaluate - * what should be done with this new L1 interrupt. - * If L1 intercepts external-interrupts, we should - * exit from L2 to L1. Otherwise, interrupt should be - * delivered directly to L2. - */ - if (is_guest_mode(vcpu) && max_irr_updated) { - if (nested_exit_on_intr(vcpu)) - kvm_vcpu_exiting_guest_mode(vcpu); - else - kvm_make_request(KVM_REQ_EVENT, vcpu); - } - } else { - max_irr = kvm_lapic_find_highest_irr(vcpu); - } - vmx_hwapic_irr_update(vcpu, max_irr); - return max_irr; -} - -static bool vmx_dy_apicv_has_pending_interrupt(struct kvm_vcpu *vcpu) -{ - struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu); - - return pi_test_on(pi_desc) || - (pi_test_sn(pi_desc) && !pi_is_pir_empty(pi_desc)); -} - -static void vmx_load_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap) -{ - if (!kvm_vcpu_apicv_active(vcpu)) - return; - - vmcs_write64(EOI_EXIT_BITMAP0, eoi_exit_bitmap[0]); - vmcs_write64(EOI_EXIT_BITMAP1, eoi_exit_bitmap[1]); - vmcs_write64(EOI_EXIT_BITMAP2, eoi_exit_bitmap[2]); - vmcs_write64(EOI_EXIT_BITMAP3, eoi_exit_bitmap[3]); -} - -static void vmx_apicv_post_state_restore(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - - pi_clear_on(&vmx->pi_desc); - memset(vmx->pi_desc.pir, 0, sizeof(vmx->pi_desc.pir)); -} - -static void handle_exception_nmi_irqoff(struct vcpu_vmx *vmx) -{ - vmx->exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO); - - /* if exit due to PF check for async PF */ - if (is_page_fault(vmx->exit_intr_info)) - vmx->vcpu.arch.apf.host_apf_reason = kvm_read_and_reset_pf_reason(); - - /* Handle machine checks before interrupts are enabled */ - if (is_machine_check(vmx->exit_intr_info)) - kvm_machine_check(); - - /* We need to handle NMIs before interrupts are enabled */ - if (is_nmi(vmx->exit_intr_info)) { - kvm_before_interrupt(&vmx->vcpu); - asm("int $2"); - kvm_after_interrupt(&vmx->vcpu); - } -} - -static void handle_external_interrupt_irqoff(struct kvm_vcpu *vcpu) -{ - unsigned int vector; - unsigned long entry; -#ifdef CONFIG_X86_64 - unsigned long tmp; -#endif - gate_desc *desc; - u32 intr_info; - - intr_info = vmcs_read32(VM_EXIT_INTR_INFO); - if (WARN_ONCE(!is_external_intr(intr_info), - "KVM: unexpected VM-Exit interrupt info: 0x%x", intr_info)) - return; - - vector = intr_info & INTR_INFO_VECTOR_MASK; - desc = (gate_desc *)host_idt_base + vector; - entry = gate_offset(desc); - - kvm_before_interrupt(vcpu); - - asm volatile( -#ifdef CONFIG_X86_64 - "mov %%" _ASM_SP ", %[sp]\n\t" - "and $0xfffffffffffffff0, %%" _ASM_SP "\n\t" - "push $%c[ss]\n\t" - "push %[sp]\n\t" -#endif - "pushf\n\t" - __ASM_SIZE(push) " $%c[cs]\n\t" - CALL_NOSPEC - : -#ifdef CONFIG_X86_64 - [sp]"=&r"(tmp), -#endif - ASM_CALL_CONSTRAINT - : - THUNK_TARGET(entry), - [ss]"i"(__KERNEL_DS), - [cs]"i"(__KERNEL_CS) - ); - - kvm_after_interrupt(vcpu); -} -STACK_FRAME_NON_STANDARD(handle_external_interrupt_irqoff); - -static void vmx_handle_exit_irqoff(struct kvm_vcpu *vcpu, - enum exit_fastpath_completion *exit_fastpath) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - - if (vmx->exit_reason == EXIT_REASON_EXTERNAL_INTERRUPT) - handle_external_interrupt_irqoff(vcpu); - else if (vmx->exit_reason == EXIT_REASON_EXCEPTION_NMI) - handle_exception_nmi_irqoff(vmx); - else if (!is_guest_mode(vcpu) && - vmx->exit_reason == EXIT_REASON_MSR_WRITE) - *exit_fastpath = handle_fastpath_set_msr_irqoff(vcpu); -} - -static bool vmx_has_emulated_msr(int index) -{ - switch (index) { - case MSR_IA32_SMBASE: - /* - * We cannot do SMM unless we can run the guest in big - * real mode. - */ - return enable_unrestricted_guest || emulate_invalid_guest_state; - case MSR_IA32_VMX_BASIC ... MSR_IA32_VMX_VMFUNC: - return nested; - case MSR_AMD64_VIRT_SPEC_CTRL: - /* This is AMD only. */ - return false; - default: - return true; - } -} - -static bool vmx_pt_supported(void) -{ - return pt_mode == PT_MODE_HOST_GUEST; -} - -static void vmx_recover_nmi_blocking(struct vcpu_vmx *vmx) -{ - u32 exit_intr_info; - bool unblock_nmi; - u8 vector; - bool idtv_info_valid; - - idtv_info_valid = vmx->idt_vectoring_info & VECTORING_INFO_VALID_MASK; - - if (enable_vnmi) { - if (vmx->loaded_vmcs->nmi_known_unmasked) - return; - /* - * Can't use vmx->exit_intr_info since we're not sure what - * the exit reason is. - */ - exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO); - unblock_nmi = (exit_intr_info & INTR_INFO_UNBLOCK_NMI) != 0; - vector = exit_intr_info & INTR_INFO_VECTOR_MASK; - /* - * SDM 3: 27.7.1.2 (September 2008) - * Re-set bit "block by NMI" before VM entry if vmexit caused by - * a guest IRET fault. - * SDM 3: 23.2.2 (September 2008) - * Bit 12 is undefined in any of the following cases: - * If the VM exit sets the valid bit in the IDT-vectoring - * information field. - * If the VM exit is due to a double fault. - */ - if ((exit_intr_info & INTR_INFO_VALID_MASK) && unblock_nmi && - vector != DF_VECTOR && !idtv_info_valid) - vmcs_set_bits(GUEST_INTERRUPTIBILITY_INFO, - GUEST_INTR_STATE_NMI); - else - vmx->loaded_vmcs->nmi_known_unmasked = - !(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) - & GUEST_INTR_STATE_NMI); - } else if (unlikely(vmx->loaded_vmcs->soft_vnmi_blocked)) - vmx->loaded_vmcs->vnmi_blocked_time += - ktime_to_ns(ktime_sub(ktime_get(), - vmx->loaded_vmcs->entry_time)); -} - -static void __vmx_complete_interrupts(struct kvm_vcpu *vcpu, - u32 idt_vectoring_info, - int instr_len_field, - int error_code_field) -{ - u8 vector; - int type; - bool idtv_info_valid; - - idtv_info_valid = idt_vectoring_info & VECTORING_INFO_VALID_MASK; - - vcpu->arch.nmi_injected = false; - kvm_clear_exception_queue(vcpu); - kvm_clear_interrupt_queue(vcpu); - - if (!idtv_info_valid) - return; - - kvm_make_request(KVM_REQ_EVENT, vcpu); - - vector = idt_vectoring_info & VECTORING_INFO_VECTOR_MASK; - type = idt_vectoring_info & VECTORING_INFO_TYPE_MASK; - - switch (type) { - case INTR_TYPE_NMI_INTR: - vcpu->arch.nmi_injected = true; - /* - * SDM 3: 27.7.1.2 (September 2008) - * Clear bit "block by NMI" before VM entry if a NMI - * delivery faulted. - */ - vmx_set_nmi_mask(vcpu, false); - break; - case INTR_TYPE_SOFT_EXCEPTION: - vcpu->arch.event_exit_inst_len = vmcs_read32(instr_len_field); - /* fall through */ - case INTR_TYPE_HARD_EXCEPTION: - if (idt_vectoring_info & VECTORING_INFO_DELIVER_CODE_MASK) { - u32 err = vmcs_read32(error_code_field); - kvm_requeue_exception_e(vcpu, vector, err); - } else - kvm_requeue_exception(vcpu, vector); - break; - case INTR_TYPE_SOFT_INTR: - vcpu->arch.event_exit_inst_len = vmcs_read32(instr_len_field); - /* fall through */ - case INTR_TYPE_EXT_INTR: - kvm_queue_interrupt(vcpu, vector, type == INTR_TYPE_SOFT_INTR); - break; - default: - break; - } -} - -static void vmx_complete_interrupts(struct vcpu_vmx *vmx) -{ - __vmx_complete_interrupts(&vmx->vcpu, vmx->idt_vectoring_info, - VM_EXIT_INSTRUCTION_LEN, - IDT_VECTORING_ERROR_CODE); -} - -static void vmx_cancel_injection(struct kvm_vcpu *vcpu) -{ - __vmx_complete_interrupts(vcpu, - vmcs_read32(VM_ENTRY_INTR_INFO_FIELD), - VM_ENTRY_INSTRUCTION_LEN, - VM_ENTRY_EXCEPTION_ERROR_CODE); - - vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, 0); -} - -static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx) -{ - int i, nr_msrs; - struct perf_guest_switch_msr *msrs; - - msrs = perf_guest_get_msrs(&nr_msrs); - - if (!msrs) - return; - - for (i = 0; i < nr_msrs; i++) - if (msrs[i].host == msrs[i].guest) - clear_atomic_switch_msr(vmx, msrs[i].msr); - else - add_atomic_switch_msr(vmx, msrs[i].msr, msrs[i].guest, - msrs[i].host, false); -} - -static void atomic_switch_umwait_control_msr(struct vcpu_vmx *vmx) -{ - u32 host_umwait_control; - - if (!vmx_has_waitpkg(vmx)) - return; - - host_umwait_control = get_umwait_control_msr(); - - if (vmx->msr_ia32_umwait_control != host_umwait_control) - add_atomic_switch_msr(vmx, MSR_IA32_UMWAIT_CONTROL, - vmx->msr_ia32_umwait_control, - host_umwait_control, false); - else - clear_atomic_switch_msr(vmx, MSR_IA32_UMWAIT_CONTROL); -} - -static void vmx_update_hv_timer(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - u64 tscl; - u32 delta_tsc; - - if (vmx->req_immediate_exit) { - vmcs_write32(VMX_PREEMPTION_TIMER_VALUE, 0); - vmx->loaded_vmcs->hv_timer_soft_disabled = false; - } else if (vmx->hv_deadline_tsc != -1) { - tscl = rdtsc(); - if (vmx->hv_deadline_tsc > tscl) - /* set_hv_timer ensures the delta fits in 32-bits */ - delta_tsc = (u32)((vmx->hv_deadline_tsc - tscl) >> - cpu_preemption_timer_multi); - else - delta_tsc = 0; - - vmcs_write32(VMX_PREEMPTION_TIMER_VALUE, delta_tsc); - vmx->loaded_vmcs->hv_timer_soft_disabled = false; - } else if (!vmx->loaded_vmcs->hv_timer_soft_disabled) { - vmcs_write32(VMX_PREEMPTION_TIMER_VALUE, -1); - vmx->loaded_vmcs->hv_timer_soft_disabled = true; - } -} - -void vmx_update_host_rsp(struct vcpu_vmx *vmx, unsigned long host_rsp) -{ - if (unlikely(host_rsp != vmx->loaded_vmcs->host_state.rsp)) { - vmx->loaded_vmcs->host_state.rsp = host_rsp; - vmcs_writel(HOST_RSP, host_rsp); - } -} - -bool __vmx_vcpu_run(struct vcpu_vmx *vmx, unsigned long *regs, bool launched); - -static void vmx_vcpu_run(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - unsigned long cr3, cr4; - - /* Record the guest's net vcpu time for enforced NMI injections. */ - if (unlikely(!enable_vnmi && - vmx->loaded_vmcs->soft_vnmi_blocked)) - vmx->loaded_vmcs->entry_time = ktime_get(); - - /* Don't enter VMX if guest state is invalid, let the exit handler - start emulation until we arrive back to a valid state */ - if (vmx->emulation_required) - return; - - if (vmx->ple_window_dirty) { - vmx->ple_window_dirty = false; - vmcs_write32(PLE_WINDOW, vmx->ple_window); - } - - if (vmx->nested.need_vmcs12_to_shadow_sync) - nested_sync_vmcs12_to_shadow(vcpu); - - if (kvm_register_is_dirty(vcpu, VCPU_REGS_RSP)) - vmcs_writel(GUEST_RSP, vcpu->arch.regs[VCPU_REGS_RSP]); - if (kvm_register_is_dirty(vcpu, VCPU_REGS_RIP)) - vmcs_writel(GUEST_RIP, vcpu->arch.regs[VCPU_REGS_RIP]); - - cr3 = __get_current_cr3_fast(); - if (unlikely(cr3 != vmx->loaded_vmcs->host_state.cr3)) { - vmcs_writel(HOST_CR3, cr3); - vmx->loaded_vmcs->host_state.cr3 = cr3; - } - - cr4 = cr4_read_shadow(); - if (unlikely(cr4 != vmx->loaded_vmcs->host_state.cr4)) { - vmcs_writel(HOST_CR4, cr4); - vmx->loaded_vmcs->host_state.cr4 = cr4; - } - - /* When single-stepping over STI and MOV SS, we must clear the - * corresponding interruptibility bits in the guest state. Otherwise - * vmentry fails as it then expects bit 14 (BS) in pending debug - * exceptions being set, but that's not correct for the guest debugging - * case. */ - if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) - vmx_set_interrupt_shadow(vcpu, 0); - - kvm_load_guest_xsave_state(vcpu); - - if (static_cpu_has(X86_FEATURE_PKU) && - kvm_read_cr4_bits(vcpu, X86_CR4_PKE) && - vcpu->arch.pkru != vmx->host_pkru) - __write_pkru(vcpu->arch.pkru); - - pt_guest_enter(vmx); - - atomic_switch_perf_msrs(vmx); - atomic_switch_umwait_control_msr(vmx); - - if (enable_preemption_timer) - vmx_update_hv_timer(vcpu); - - if (lapic_in_kernel(vcpu) && - vcpu->arch.apic->lapic_timer.timer_advance_ns) - kvm_wait_lapic_expire(vcpu); - - /* - * If this vCPU has touched SPEC_CTRL, restore the guest's value if - * it's non-zero. Since vmentry is serialising on affected CPUs, there - * is no need to worry about the conditional branch over the wrmsr - * being speculatively taken. - */ - x86_spec_ctrl_set_guest(vmx->spec_ctrl, 0); - - /* L1D Flush includes CPU buffer clear to mitigate MDS */ - if (static_branch_unlikely(&vmx_l1d_should_flush)) - vmx_l1d_flush(vcpu); - else if (static_branch_unlikely(&mds_user_clear)) - mds_clear_cpu_buffers(); - - if (vcpu->arch.cr2 != read_cr2()) - write_cr2(vcpu->arch.cr2); - - vmx->fail = __vmx_vcpu_run(vmx, (unsigned long *)&vcpu->arch.regs, - vmx->loaded_vmcs->launched); - - vcpu->arch.cr2 = read_cr2(); - - /* - * We do not use IBRS in the kernel. If this vCPU has used the - * SPEC_CTRL MSR it may have left it on; save the value and - * turn it off. This is much more efficient than blindly adding - * it to the atomic save/restore list. Especially as the former - * (Saving guest MSRs on vmexit) doesn't even exist in KVM. - * - * For non-nested case: - * If the L01 MSR bitmap does not intercept the MSR, then we need to - * save it. - * - * For nested case: - * If the L02 MSR bitmap does not intercept the MSR, then we need to - * save it. - */ - if (unlikely(!msr_write_intercepted(vcpu, MSR_IA32_SPEC_CTRL))) - vmx->spec_ctrl = native_read_msr(MSR_IA32_SPEC_CTRL); - - x86_spec_ctrl_restore_host(vmx->spec_ctrl, 0); - - /* All fields are clean at this point */ - if (static_branch_unlikely(&enable_evmcs)) - current_evmcs->hv_clean_fields |= - HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL; - - if (static_branch_unlikely(&enable_evmcs)) - current_evmcs->hv_vp_id = vcpu->arch.hyperv.vp_index; - - /* MSR_IA32_DEBUGCTLMSR is zeroed on vmexit. Restore it if needed */ - if (vmx->host_debugctlmsr) - update_debugctlmsr(vmx->host_debugctlmsr); - -#ifndef CONFIG_X86_64 - /* - * The sysexit path does not restore ds/es, so we must set them to - * a reasonable value ourselves. - * - * We can't defer this to vmx_prepare_switch_to_host() since that - * function may be executed in interrupt context, which saves and - * restore segments around it, nullifying its effect. - */ - loadsegment(ds, __USER_DS); - loadsegment(es, __USER_DS); -#endif - - vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP) - | (1 << VCPU_EXREG_RFLAGS) - | (1 << VCPU_EXREG_PDPTR) - | (1 << VCPU_EXREG_SEGMENTS) - | (1 << VCPU_EXREG_CR3)); - vcpu->arch.regs_dirty = 0; - - pt_guest_exit(vmx); - - /* - * eager fpu is enabled if PKEY is supported and CR4 is switched - * back on host, so it is safe to read guest PKRU from current - * XSAVE. - */ - if (static_cpu_has(X86_FEATURE_PKU) && - kvm_read_cr4_bits(vcpu, X86_CR4_PKE)) { - vcpu->arch.pkru = rdpkru(); - if (vcpu->arch.pkru != vmx->host_pkru) - __write_pkru(vmx->host_pkru); - } - - kvm_load_host_xsave_state(vcpu); - - vmx->nested.nested_run_pending = 0; - vmx->idt_vectoring_info = 0; - - vmx->exit_reason = vmx->fail ? 0xdead : vmcs_read32(VM_EXIT_REASON); - if ((u16)vmx->exit_reason == EXIT_REASON_MCE_DURING_VMENTRY) - kvm_machine_check(); - - if (vmx->fail || (vmx->exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY)) - return; - - vmx->loaded_vmcs->launched = 1; - vmx->idt_vectoring_info = vmcs_read32(IDT_VECTORING_INFO_FIELD); - - vmx_recover_nmi_blocking(vmx); - vmx_complete_interrupts(vmx); -} - -static struct kvm *vmx_vm_alloc(void) -{ - struct kvm_vmx *kvm_vmx = __vmalloc(sizeof(struct kvm_vmx), - GFP_KERNEL_ACCOUNT | __GFP_ZERO, - PAGE_KERNEL); - return &kvm_vmx->kvm; -} - -static void vmx_vm_free(struct kvm *kvm) -{ - kfree(kvm->arch.hyperv.hv_pa_pg); - vfree(to_kvm_vmx(kvm)); -} - -static void vmx_free_vcpu(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - - if (enable_pml) - vmx_destroy_pml_buffer(vmx); - free_vpid(vmx->vpid); - nested_vmx_free_vcpu(vcpu); - free_loaded_vmcs(vmx->loaded_vmcs); - kvm_vcpu_uninit(vcpu); - kmem_cache_free(x86_fpu_cache, vmx->vcpu.arch.user_fpu); - kmem_cache_free(x86_fpu_cache, vmx->vcpu.arch.guest_fpu); - kmem_cache_free(kvm_vcpu_cache, vmx); -} - -static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id) -{ - int err; - struct vcpu_vmx *vmx; - unsigned long *msr_bitmap; - int i, cpu; - - BUILD_BUG_ON_MSG(offsetof(struct vcpu_vmx, vcpu) != 0, - "struct kvm_vcpu must be at offset 0 for arch usercopy region"); - - vmx = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL_ACCOUNT); - if (!vmx) - return ERR_PTR(-ENOMEM); - - vmx->vcpu.arch.user_fpu = kmem_cache_zalloc(x86_fpu_cache, - GFP_KERNEL_ACCOUNT); - if (!vmx->vcpu.arch.user_fpu) { - printk(KERN_ERR "kvm: failed to allocate kvm userspace's fpu\n"); - err = -ENOMEM; - goto free_partial_vcpu; - } - - vmx->vcpu.arch.guest_fpu = kmem_cache_zalloc(x86_fpu_cache, - GFP_KERNEL_ACCOUNT); - if (!vmx->vcpu.arch.guest_fpu) { - printk(KERN_ERR "kvm: failed to allocate vcpu's fpu\n"); - err = -ENOMEM; - goto free_user_fpu; - } - - vmx->vpid = allocate_vpid(); - - err = kvm_vcpu_init(&vmx->vcpu, kvm, id); - if (err) - goto free_vcpu; - - err = -ENOMEM; - - /* - * If PML is turned on, failure on enabling PML just results in failure - * of creating the vcpu, therefore we can simplify PML logic (by - * avoiding dealing with cases, such as enabling PML partially on vcpus - * for the guest), etc. - */ - if (enable_pml) { - vmx->pml_pg = alloc_page(GFP_KERNEL_ACCOUNT | __GFP_ZERO); - if (!vmx->pml_pg) - goto uninit_vcpu; - } - - BUILD_BUG_ON(ARRAY_SIZE(vmx_msr_index) != NR_SHARED_MSRS); - - for (i = 0; i < ARRAY_SIZE(vmx_msr_index); ++i) { - u32 index = vmx_msr_index[i]; - u32 data_low, data_high; - int j = vmx->nmsrs; - - if (rdmsr_safe(index, &data_low, &data_high) < 0) - continue; - if (wrmsr_safe(index, data_low, data_high) < 0) - continue; - - vmx->guest_msrs[j].index = i; - vmx->guest_msrs[j].data = 0; - switch (index) { - case MSR_IA32_TSX_CTRL: - /* - * No need to pass TSX_CTRL_CPUID_CLEAR through, so - * let's avoid changing CPUID bits under the host - * kernel's feet. - */ - vmx->guest_msrs[j].mask = ~(u64)TSX_CTRL_CPUID_CLEAR; - break; - default: - vmx->guest_msrs[j].mask = -1ull; - break; - } - ++vmx->nmsrs; - } - - err = alloc_loaded_vmcs(&vmx->vmcs01); - if (err < 0) - goto free_pml; - - msr_bitmap = vmx->vmcs01.msr_bitmap; - vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_TSC, MSR_TYPE_R); - vmx_disable_intercept_for_msr(msr_bitmap, MSR_FS_BASE, MSR_TYPE_RW); - vmx_disable_intercept_for_msr(msr_bitmap, MSR_GS_BASE, MSR_TYPE_RW); - vmx_disable_intercept_for_msr(msr_bitmap, MSR_KERNEL_GS_BASE, MSR_TYPE_RW); - vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_SYSENTER_CS, MSR_TYPE_RW); - vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_SYSENTER_ESP, MSR_TYPE_RW); - vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_SYSENTER_EIP, MSR_TYPE_RW); - if (kvm_cstate_in_guest(kvm)) { - vmx_disable_intercept_for_msr(msr_bitmap, MSR_CORE_C1_RES, MSR_TYPE_R); - vmx_disable_intercept_for_msr(msr_bitmap, MSR_CORE_C3_RESIDENCY, MSR_TYPE_R); - vmx_disable_intercept_for_msr(msr_bitmap, MSR_CORE_C6_RESIDENCY, MSR_TYPE_R); - vmx_disable_intercept_for_msr(msr_bitmap, MSR_CORE_C7_RESIDENCY, MSR_TYPE_R); - } - vmx->msr_bitmap_mode = 0; - - vmx->loaded_vmcs = &vmx->vmcs01; - cpu = get_cpu(); - vmx_vcpu_load(&vmx->vcpu, cpu); - vmx->vcpu.cpu = cpu; - init_vmcs(vmx); - vmx_vcpu_put(&vmx->vcpu); - put_cpu(); - if (cpu_need_virtualize_apic_accesses(&vmx->vcpu)) { - err = alloc_apic_access_page(kvm); - if (err) - goto free_vmcs; - } - - if (enable_ept && !enable_unrestricted_guest) { - err = init_rmode_identity_map(kvm); - if (err) - goto free_vmcs; - } - - if (nested) - nested_vmx_setup_ctls_msrs(&vmx->nested.msrs, - vmx_capability.ept, - kvm_vcpu_apicv_active(&vmx->vcpu)); - else - memset(&vmx->nested.msrs, 0, sizeof(vmx->nested.msrs)); - - vmx->nested.posted_intr_nv = -1; - vmx->nested.current_vmptr = -1ull; - - vmx->msr_ia32_feature_control_valid_bits = FEATURE_CONTROL_LOCKED; - - /* - * Enforce invariant: pi_desc.nv is always either POSTED_INTR_VECTOR - * or POSTED_INTR_WAKEUP_VECTOR. - */ - vmx->pi_desc.nv = POSTED_INTR_VECTOR; - vmx->pi_desc.sn = 1; - - vmx->ept_pointer = INVALID_PAGE; - - return &vmx->vcpu; - -free_vmcs: - free_loaded_vmcs(vmx->loaded_vmcs); -free_pml: - vmx_destroy_pml_buffer(vmx); -uninit_vcpu: - kvm_vcpu_uninit(&vmx->vcpu); -free_vcpu: - free_vpid(vmx->vpid); - kmem_cache_free(x86_fpu_cache, vmx->vcpu.arch.guest_fpu); -free_user_fpu: - kmem_cache_free(x86_fpu_cache, vmx->vcpu.arch.user_fpu); -free_partial_vcpu: - kmem_cache_free(kvm_vcpu_cache, vmx); - return ERR_PTR(err); -} - -#define L1TF_MSG_SMT "L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.\n" -#define L1TF_MSG_L1D "L1TF CPU bug present and virtualization mitigation disabled, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.\n" - -static int vmx_vm_init(struct kvm *kvm) -{ - spin_lock_init(&to_kvm_vmx(kvm)->ept_pointer_lock); - - if (!ple_gap) - kvm->arch.pause_in_guest = true; - - if (boot_cpu_has(X86_BUG_L1TF) && enable_ept) { - switch (l1tf_mitigation) { - case L1TF_MITIGATION_OFF: - case L1TF_MITIGATION_FLUSH_NOWARN: - /* 'I explicitly don't care' is set */ - break; - case L1TF_MITIGATION_FLUSH: - case L1TF_MITIGATION_FLUSH_NOSMT: - case L1TF_MITIGATION_FULL: - /* - * Warn upon starting the first VM in a potentially - * insecure environment. - */ - if (sched_smt_active()) - pr_warn_once(L1TF_MSG_SMT); - if (l1tf_vmx_mitigation == VMENTER_L1D_FLUSH_NEVER) - pr_warn_once(L1TF_MSG_L1D); - break; - case L1TF_MITIGATION_FULL_FORCE: - /* Flush is enforced */ - break; - } - } - return 0; -} - -static int __init vmx_check_processor_compat(void) -{ - struct vmcs_config vmcs_conf; - struct vmx_capability vmx_cap; - - if (setup_vmcs_config(&vmcs_conf, &vmx_cap) < 0) - return -EIO; - if (nested) - nested_vmx_setup_ctls_msrs(&vmcs_conf.nested, vmx_cap.ept, - enable_apicv); - if (memcmp(&vmcs_config, &vmcs_conf, sizeof(struct vmcs_config)) != 0) { - printk(KERN_ERR "kvm: CPU %d feature inconsistency!\n", - smp_processor_id()); - return -EIO; - } - return 0; -} - -static u64 vmx_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio) -{ - u8 cache; - u64 ipat = 0; - - /* For VT-d and EPT combination - * 1. MMIO: always map as UC - * 2. EPT with VT-d: - * a. VT-d without snooping control feature: can't guarantee the - * result, try to trust guest. - * b. VT-d with snooping control feature: snooping control feature of - * VT-d engine can guarantee the cache correctness. Just set it - * to WB to keep consistent with host. So the same as item 3. - * 3. EPT without VT-d: always map as WB and set IPAT=1 to keep - * consistent with host MTRR - */ - if (is_mmio) { - cache = MTRR_TYPE_UNCACHABLE; - goto exit; - } - - if (!kvm_arch_has_noncoherent_dma(vcpu->kvm)) { - ipat = VMX_EPT_IPAT_BIT; - cache = MTRR_TYPE_WRBACK; - goto exit; - } - - if (kvm_read_cr0(vcpu) & X86_CR0_CD) { - ipat = VMX_EPT_IPAT_BIT; - if (kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_CD_NW_CLEARED)) - cache = MTRR_TYPE_WRBACK; - else - cache = MTRR_TYPE_UNCACHABLE; - goto exit; - } - - cache = kvm_mtrr_get_guest_memory_type(vcpu, gfn); - -exit: - return (cache << VMX_EPT_MT_EPTE_SHIFT) | ipat; -} - -static int vmx_get_lpage_level(void) -{ - if (enable_ept && !cpu_has_vmx_ept_1g_page()) - return PT_DIRECTORY_LEVEL; - else - /* For shadow and EPT supported 1GB page */ - return PT_PDPE_LEVEL; -} - -static void vmcs_set_secondary_exec_control(struct vcpu_vmx *vmx) -{ - /* - * These bits in the secondary execution controls field - * are dynamic, the others are mostly based on the hypervisor - * architecture and the guest's CPUID. Do not touch the - * dynamic bits. - */ - u32 mask = - SECONDARY_EXEC_SHADOW_VMCS | - SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE | - SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES | - SECONDARY_EXEC_DESC; - - u32 new_ctl = vmx->secondary_exec_control; - u32 cur_ctl = secondary_exec_controls_get(vmx); - - secondary_exec_controls_set(vmx, (new_ctl & ~mask) | (cur_ctl & mask)); -} - -/* - * Generate MSR_IA32_VMX_CR{0,4}_FIXED1 according to CPUID. Only set bits - * (indicating "allowed-1") if they are supported in the guest's CPUID. - */ -static void nested_vmx_cr_fixed1_bits_update(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - struct kvm_cpuid_entry2 *entry; - - vmx->nested.msrs.cr0_fixed1 = 0xffffffff; - vmx->nested.msrs.cr4_fixed1 = X86_CR4_PCE; - -#define cr4_fixed1_update(_cr4_mask, _reg, _cpuid_mask) do { \ - if (entry && (entry->_reg & (_cpuid_mask))) \ - vmx->nested.msrs.cr4_fixed1 |= (_cr4_mask); \ -} while (0) - - entry = kvm_find_cpuid_entry(vcpu, 0x1, 0); - cr4_fixed1_update(X86_CR4_VME, edx, bit(X86_FEATURE_VME)); - cr4_fixed1_update(X86_CR4_PVI, edx, bit(X86_FEATURE_VME)); - cr4_fixed1_update(X86_CR4_TSD, edx, bit(X86_FEATURE_TSC)); - cr4_fixed1_update(X86_CR4_DE, edx, bit(X86_FEATURE_DE)); - cr4_fixed1_update(X86_CR4_PSE, edx, bit(X86_FEATURE_PSE)); - cr4_fixed1_update(X86_CR4_PAE, edx, bit(X86_FEATURE_PAE)); - cr4_fixed1_update(X86_CR4_MCE, edx, bit(X86_FEATURE_MCE)); - cr4_fixed1_update(X86_CR4_PGE, edx, bit(X86_FEATURE_PGE)); - cr4_fixed1_update(X86_CR4_OSFXSR, edx, bit(X86_FEATURE_FXSR)); - cr4_fixed1_update(X86_CR4_OSXMMEXCPT, edx, bit(X86_FEATURE_XMM)); - cr4_fixed1_update(X86_CR4_VMXE, ecx, bit(X86_FEATURE_VMX)); - cr4_fixed1_update(X86_CR4_SMXE, ecx, bit(X86_FEATURE_SMX)); - cr4_fixed1_update(X86_CR4_PCIDE, ecx, bit(X86_FEATURE_PCID)); - cr4_fixed1_update(X86_CR4_OSXSAVE, ecx, bit(X86_FEATURE_XSAVE)); - - entry = kvm_find_cpuid_entry(vcpu, 0x7, 0); - cr4_fixed1_update(X86_CR4_FSGSBASE, ebx, bit(X86_FEATURE_FSGSBASE)); - cr4_fixed1_update(X86_CR4_SMEP, ebx, bit(X86_FEATURE_SMEP)); - cr4_fixed1_update(X86_CR4_SMAP, ebx, bit(X86_FEATURE_SMAP)); - cr4_fixed1_update(X86_CR4_PKE, ecx, bit(X86_FEATURE_PKU)); - cr4_fixed1_update(X86_CR4_UMIP, ecx, bit(X86_FEATURE_UMIP)); - cr4_fixed1_update(X86_CR4_LA57, ecx, bit(X86_FEATURE_LA57)); - -#undef cr4_fixed1_update -} - -static void nested_vmx_entry_exit_ctls_update(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - - if (kvm_mpx_supported()) { - bool mpx_enabled = guest_cpuid_has(vcpu, X86_FEATURE_MPX); - - if (mpx_enabled) { - vmx->nested.msrs.entry_ctls_high |= VM_ENTRY_LOAD_BNDCFGS; - vmx->nested.msrs.exit_ctls_high |= VM_EXIT_CLEAR_BNDCFGS; - } else { - vmx->nested.msrs.entry_ctls_high &= ~VM_ENTRY_LOAD_BNDCFGS; - vmx->nested.msrs.exit_ctls_high &= ~VM_EXIT_CLEAR_BNDCFGS; - } - } -} - -static void update_intel_pt_cfg(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - struct kvm_cpuid_entry2 *best = NULL; - int i; - - for (i = 0; i < PT_CPUID_LEAVES; i++) { - best = kvm_find_cpuid_entry(vcpu, 0x14, i); - if (!best) - return; - vmx->pt_desc.caps[CPUID_EAX + i*PT_CPUID_REGS_NUM] = best->eax; - vmx->pt_desc.caps[CPUID_EBX + i*PT_CPUID_REGS_NUM] = best->ebx; - vmx->pt_desc.caps[CPUID_ECX + i*PT_CPUID_REGS_NUM] = best->ecx; - vmx->pt_desc.caps[CPUID_EDX + i*PT_CPUID_REGS_NUM] = best->edx; - } - - /* Get the number of configurable Address Ranges for filtering */ - vmx->pt_desc.addr_range = intel_pt_validate_cap(vmx->pt_desc.caps, - PT_CAP_num_address_ranges); - - /* Initialize and clear the no dependency bits */ - vmx->pt_desc.ctl_bitmask = ~(RTIT_CTL_TRACEEN | RTIT_CTL_OS | - RTIT_CTL_USR | RTIT_CTL_TSC_EN | RTIT_CTL_DISRETC); - - /* - * If CPUID.(EAX=14H,ECX=0):EBX[0]=1 CR3Filter can be set otherwise - * will inject an #GP - */ - if (intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_cr3_filtering)) - vmx->pt_desc.ctl_bitmask &= ~RTIT_CTL_CR3EN; - - /* - * If CPUID.(EAX=14H,ECX=0):EBX[1]=1 CYCEn, CycThresh and - * PSBFreq can be set - */ - if (intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_psb_cyc)) - vmx->pt_desc.ctl_bitmask &= ~(RTIT_CTL_CYCLEACC | - RTIT_CTL_CYC_THRESH | RTIT_CTL_PSB_FREQ); - - /* - * If CPUID.(EAX=14H,ECX=0):EBX[3]=1 MTCEn BranchEn and - * MTCFreq can be set - */ - if (intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_mtc)) - vmx->pt_desc.ctl_bitmask &= ~(RTIT_CTL_MTC_EN | - RTIT_CTL_BRANCH_EN | RTIT_CTL_MTC_RANGE); - - /* If CPUID.(EAX=14H,ECX=0):EBX[4]=1 FUPonPTW and PTWEn can be set */ - if (intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_ptwrite)) - vmx->pt_desc.ctl_bitmask &= ~(RTIT_CTL_FUP_ON_PTW | - RTIT_CTL_PTW_EN); - - /* If CPUID.(EAX=14H,ECX=0):EBX[5]=1 PwrEvEn can be set */ - if (intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_power_event_trace)) - vmx->pt_desc.ctl_bitmask &= ~RTIT_CTL_PWR_EVT_EN; - - /* If CPUID.(EAX=14H,ECX=0):ECX[0]=1 ToPA can be set */ - if (intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_topa_output)) - vmx->pt_desc.ctl_bitmask &= ~RTIT_CTL_TOPA; - - /* If CPUID.(EAX=14H,ECX=0):ECX[3]=1 FabircEn can be set */ - if (intel_pt_validate_cap(vmx->pt_desc.caps, PT_CAP_output_subsys)) - vmx->pt_desc.ctl_bitmask &= ~RTIT_CTL_FABRIC_EN; - - /* unmask address range configure area */ - for (i = 0; i < vmx->pt_desc.addr_range; i++) - vmx->pt_desc.ctl_bitmask &= ~(0xfULL << (32 + i * 4)); -} - -static void vmx_cpuid_update(struct kvm_vcpu *vcpu) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - - /* xsaves_enabled is recomputed in vmx_compute_secondary_exec_control(). */ - vcpu->arch.xsaves_enabled = false; - - if (cpu_has_secondary_exec_ctrls()) { - vmx_compute_secondary_exec_control(vmx); - vmcs_set_secondary_exec_control(vmx); - } - - if (nested_vmx_allowed(vcpu)) - to_vmx(vcpu)->msr_ia32_feature_control_valid_bits |= - FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX | - FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX; - else - to_vmx(vcpu)->msr_ia32_feature_control_valid_bits &= - ~(FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX | - FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX); - - if (nested_vmx_allowed(vcpu)) { - nested_vmx_cr_fixed1_bits_update(vcpu); - nested_vmx_entry_exit_ctls_update(vcpu); - } - - if (boot_cpu_has(X86_FEATURE_INTEL_PT) && - guest_cpuid_has(vcpu, X86_FEATURE_INTEL_PT)) - update_intel_pt_cfg(vcpu); - - if (boot_cpu_has(X86_FEATURE_RTM)) { - struct shared_msr_entry *msr; - msr = find_msr_entry(vmx, MSR_IA32_TSX_CTRL); - if (msr) { - bool enabled = guest_cpuid_has(vcpu, X86_FEATURE_RTM); - vmx_set_guest_msr(vmx, msr, enabled ? 0 : TSX_CTRL_RTM_DISABLE); - } - } -} - -static void vmx_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry) -{ - if (func == 1 && nested) - entry->ecx |= bit(X86_FEATURE_VMX); -} - -static void vmx_request_immediate_exit(struct kvm_vcpu *vcpu) -{ - to_vmx(vcpu)->req_immediate_exit = true; -} - -static int vmx_check_intercept(struct kvm_vcpu *vcpu, - struct x86_instruction_info *info, - enum x86_intercept_stage stage) -{ - struct vmcs12 *vmcs12 = get_vmcs12(vcpu); - struct x86_emulate_ctxt *ctxt = &vcpu->arch.emulate_ctxt; - - /* - * RDPID causes #UD if disabled through secondary execution controls. - * Because it is marked as EmulateOnUD, we need to intercept it here. - */ - if (info->intercept == x86_intercept_rdtscp && - !nested_cpu_has2(vmcs12, SECONDARY_EXEC_RDTSCP)) { - ctxt->exception.vector = UD_VECTOR; - ctxt->exception.error_code_valid = false; - return X86EMUL_PROPAGATE_FAULT; - } - - /* TODO: check more intercepts... */ - return X86EMUL_CONTINUE; -} - -#ifdef CONFIG_X86_64 -/* (a << shift) / divisor, return 1 if overflow otherwise 0 */ -static inline int u64_shl_div_u64(u64 a, unsigned int shift, - u64 divisor, u64 *result) -{ - u64 low = a << shift, high = a >> (64 - shift); - - /* To avoid the overflow on divq */ - if (high >= divisor) - return 1; - - /* Low hold the result, high hold rem which is discarded */ - asm("divq %2\n\t" : "=a" (low), "=d" (high) : - "rm" (divisor), "0" (low), "1" (high)); - *result = low; - - return 0; -} - -static int vmx_set_hv_timer(struct kvm_vcpu *vcpu, u64 guest_deadline_tsc, - bool *expired) -{ - struct vcpu_vmx *vmx; - u64 tscl, guest_tscl, delta_tsc, lapic_timer_advance_cycles; - struct kvm_timer *ktimer = &vcpu->arch.apic->lapic_timer; - - if (kvm_mwait_in_guest(vcpu->kvm) || - kvm_can_post_timer_interrupt(vcpu)) - return -EOPNOTSUPP; - - vmx = to_vmx(vcpu); - tscl = rdtsc(); - guest_tscl = kvm_read_l1_tsc(vcpu, tscl); - delta_tsc = max(guest_deadline_tsc, guest_tscl) - guest_tscl; - lapic_timer_advance_cycles = nsec_to_cycles(vcpu, - ktimer->timer_advance_ns); - - if (delta_tsc > lapic_timer_advance_cycles) - delta_tsc -= lapic_timer_advance_cycles; - else - delta_tsc = 0; - - /* Convert to host delta tsc if tsc scaling is enabled */ - if (vcpu->arch.tsc_scaling_ratio != kvm_default_tsc_scaling_ratio && - delta_tsc && u64_shl_div_u64(delta_tsc, - kvm_tsc_scaling_ratio_frac_bits, - vcpu->arch.tsc_scaling_ratio, &delta_tsc)) - return -ERANGE; - - /* - * If the delta tsc can't fit in the 32 bit after the multi shift, - * we can't use the preemption timer. - * It's possible that it fits on later vmentries, but checking - * on every vmentry is costly so we just use an hrtimer. - */ - if (delta_tsc >> (cpu_preemption_timer_multi + 32)) - return -ERANGE; - - vmx->hv_deadline_tsc = tscl + delta_tsc; - *expired = !delta_tsc; - return 0; -} - -static void vmx_cancel_hv_timer(struct kvm_vcpu *vcpu) -{ - to_vmx(vcpu)->hv_deadline_tsc = -1; -} -#endif - -static void vmx_sched_in(struct kvm_vcpu *vcpu, int cpu) -{ - if (!kvm_pause_in_guest(vcpu->kvm)) - shrink_ple_window(vcpu); -} - -static void vmx_slot_enable_log_dirty(struct kvm *kvm, - struct kvm_memory_slot *slot) -{ - kvm_mmu_slot_leaf_clear_dirty(kvm, slot); - kvm_mmu_slot_largepage_remove_write_access(kvm, slot); -} - -static void vmx_slot_disable_log_dirty(struct kvm *kvm, - struct kvm_memory_slot *slot) -{ - kvm_mmu_slot_set_dirty(kvm, slot); -} - -static void vmx_flush_log_dirty(struct kvm *kvm) -{ - kvm_flush_pml_buffers(kvm); -} - -static int vmx_write_pml_buffer(struct kvm_vcpu *vcpu) -{ - struct vmcs12 *vmcs12; - struct vcpu_vmx *vmx = to_vmx(vcpu); - gpa_t gpa, dst; - - if (is_guest_mode(vcpu)) { - WARN_ON_ONCE(vmx->nested.pml_full); - - /* - * Check if PML is enabled for the nested guest. - * Whether eptp bit 6 is set is already checked - * as part of A/D emulation. - */ - vmcs12 = get_vmcs12(vcpu); - if (!nested_cpu_has_pml(vmcs12)) - return 0; - - if (vmcs12->guest_pml_index >= PML_ENTITY_NUM) { - vmx->nested.pml_full = true; - return 1; - } - - gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS) & ~0xFFFull; - dst = vmcs12->pml_address + sizeof(u64) * vmcs12->guest_pml_index; - - if (kvm_write_guest_page(vcpu->kvm, gpa_to_gfn(dst), &gpa, - offset_in_page(dst), sizeof(gpa))) - return 0; - - vmcs12->guest_pml_index--; - } - - return 0; -} - -static void vmx_enable_log_dirty_pt_masked(struct kvm *kvm, - struct kvm_memory_slot *memslot, - gfn_t offset, unsigned long mask) -{ - kvm_mmu_clear_dirty_pt_masked(kvm, memslot, offset, mask); -} - -static void __pi_post_block(struct kvm_vcpu *vcpu) -{ - struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu); - struct pi_desc old, new; - unsigned int dest; - - do { - old.control = new.control = pi_desc->control; - WARN(old.nv != POSTED_INTR_WAKEUP_VECTOR, - "Wakeup handler not enabled while the VCPU is blocked\n"); - - dest = cpu_physical_id(vcpu->cpu); - - if (x2apic_enabled()) - new.ndst = dest; - else - new.ndst = (dest << 8) & 0xFF00; - - /* set 'NV' to 'notification vector' */ - new.nv = POSTED_INTR_VECTOR; - } while (cmpxchg64(&pi_desc->control, old.control, - new.control) != old.control); - - if (!WARN_ON_ONCE(vcpu->pre_pcpu == -1)) { - spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu)); - list_del(&vcpu->blocked_vcpu_list); - spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu)); - vcpu->pre_pcpu = -1; - } -} - -/* - * This routine does the following things for vCPU which is going - * to be blocked if VT-d PI is enabled. - * - Store the vCPU to the wakeup list, so when interrupts happen - * we can find the right vCPU to wake up. - * - Change the Posted-interrupt descriptor as below: - * 'NDST' <-- vcpu->pre_pcpu - * 'NV' <-- POSTED_INTR_WAKEUP_VECTOR - * - If 'ON' is set during this process, which means at least one - * interrupt is posted for this vCPU, we cannot block it, in - * this case, return 1, otherwise, return 0. - * - */ -static int pi_pre_block(struct kvm_vcpu *vcpu) -{ - unsigned int dest; - struct pi_desc old, new; - struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu); - - if (!kvm_arch_has_assigned_device(vcpu->kvm) || - !irq_remapping_cap(IRQ_POSTING_CAP) || - !kvm_vcpu_apicv_active(vcpu)) - return 0; - - WARN_ON(irqs_disabled()); - local_irq_disable(); - if (!WARN_ON_ONCE(vcpu->pre_pcpu != -1)) { - vcpu->pre_pcpu = vcpu->cpu; - spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu)); - list_add_tail(&vcpu->blocked_vcpu_list, - &per_cpu(blocked_vcpu_on_cpu, - vcpu->pre_pcpu)); - spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu)); - } - - do { - old.control = new.control = pi_desc->control; - - WARN((pi_desc->sn == 1), - "Warning: SN field of posted-interrupts " - "is set before blocking\n"); - - /* - * Since vCPU can be preempted during this process, - * vcpu->cpu could be different with pre_pcpu, we - * need to set pre_pcpu as the destination of wakeup - * notification event, then we can find the right vCPU - * to wakeup in wakeup handler if interrupts happen - * when the vCPU is in blocked state. - */ - dest = cpu_physical_id(vcpu->pre_pcpu); - - if (x2apic_enabled()) - new.ndst = dest; - else - new.ndst = (dest << 8) & 0xFF00; - - /* set 'NV' to 'wakeup vector' */ - new.nv = POSTED_INTR_WAKEUP_VECTOR; - } while (cmpxchg64(&pi_desc->control, old.control, - new.control) != old.control); - - /* We should not block the vCPU if an interrupt is posted for it. */ - if (pi_test_on(pi_desc) == 1) - __pi_post_block(vcpu); - - local_irq_enable(); - return (vcpu->pre_pcpu == -1); -} - -static int vmx_pre_block(struct kvm_vcpu *vcpu) -{ - if (pi_pre_block(vcpu)) - return 1; - - if (kvm_lapic_hv_timer_in_use(vcpu)) - kvm_lapic_switch_to_sw_timer(vcpu); - - return 0; -} - -static void pi_post_block(struct kvm_vcpu *vcpu) -{ - if (vcpu->pre_pcpu == -1) - return; - - WARN_ON(irqs_disabled()); - local_irq_disable(); - __pi_post_block(vcpu); - local_irq_enable(); -} - -static void vmx_post_block(struct kvm_vcpu *vcpu) -{ - if (kvm_x86_ops->set_hv_timer) - kvm_lapic_switch_to_hv_timer(vcpu); - - pi_post_block(vcpu); -} - -/* - * vmx_update_pi_irte - set IRTE for Posted-Interrupts - * - * @kvm: kvm - * @host_irq: host irq of the interrupt - * @guest_irq: gsi of the interrupt - * @set: set or unset PI - * returns 0 on success, < 0 on failure - */ -static int vmx_update_pi_irte(struct kvm *kvm, unsigned int host_irq, - uint32_t guest_irq, bool set) -{ - struct kvm_kernel_irq_routing_entry *e; - struct kvm_irq_routing_table *irq_rt; - struct kvm_lapic_irq irq; - struct kvm_vcpu *vcpu; - struct vcpu_data vcpu_info; - int idx, ret = 0; - - if (!kvm_arch_has_assigned_device(kvm) || - !irq_remapping_cap(IRQ_POSTING_CAP) || - !kvm_vcpu_apicv_active(kvm->vcpus[0])) - return 0; - - idx = srcu_read_lock(&kvm->irq_srcu); - irq_rt = srcu_dereference(kvm->irq_routing, &kvm->irq_srcu); - if (guest_irq >= irq_rt->nr_rt_entries || - hlist_empty(&irq_rt->map[guest_irq])) { - pr_warn_once("no route for guest_irq %u/%u (broken user space?)\n", - guest_irq, irq_rt->nr_rt_entries); - goto out; - } - - hlist_for_each_entry(e, &irq_rt->map[guest_irq], link) { - if (e->type != KVM_IRQ_ROUTING_MSI) - continue; - /* - * VT-d PI cannot support posting multicast/broadcast - * interrupts to a vCPU, we still use interrupt remapping - * for these kind of interrupts. - * - * For lowest-priority interrupts, we only support - * those with single CPU as the destination, e.g. user - * configures the interrupts via /proc/irq or uses - * irqbalance to make the interrupts single-CPU. - * - * We will support full lowest-priority interrupt later. - * - * In addition, we can only inject generic interrupts using - * the PI mechanism, refuse to route others through it. - */ - - kvm_set_msi_irq(kvm, e, &irq); - if (!kvm_intr_is_single_vcpu(kvm, &irq, &vcpu) || - !kvm_irq_is_postable(&irq)) { - /* - * Make sure the IRTE is in remapped mode if - * we don't handle it in posted mode. - */ - ret = irq_set_vcpu_affinity(host_irq, NULL); - if (ret < 0) { - printk(KERN_INFO - "failed to back to remapped mode, irq: %u\n", - host_irq); - goto out; - } - - continue; - } - - vcpu_info.pi_desc_addr = __pa(vcpu_to_pi_desc(vcpu)); - vcpu_info.vector = irq.vector; - - trace_kvm_pi_irte_update(host_irq, vcpu->vcpu_id, e->gsi, - vcpu_info.vector, vcpu_info.pi_desc_addr, set); - - if (set) - ret = irq_set_vcpu_affinity(host_irq, &vcpu_info); - else - ret = irq_set_vcpu_affinity(host_irq, NULL); - - if (ret < 0) { - printk(KERN_INFO "%s: failed to update PI IRTE\n", - __func__); - goto out; - } - } - - ret = 0; -out: - srcu_read_unlock(&kvm->irq_srcu, idx); - return ret; -} - -static void vmx_setup_mce(struct kvm_vcpu *vcpu) -{ - if (vcpu->arch.mcg_cap & MCG_LMCE_P) - to_vmx(vcpu)->msr_ia32_feature_control_valid_bits |= - FEATURE_CONTROL_LMCE; - else - to_vmx(vcpu)->msr_ia32_feature_control_valid_bits &= - ~FEATURE_CONTROL_LMCE; -} - -static int vmx_smi_allowed(struct kvm_vcpu *vcpu) -{ - /* we need a nested vmexit to enter SMM, postpone if run is pending */ - if (to_vmx(vcpu)->nested.nested_run_pending) - return 0; - return 1; -} - -static int vmx_pre_enter_smm(struct kvm_vcpu *vcpu, char *smstate) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - - vmx->nested.smm.guest_mode = is_guest_mode(vcpu); - if (vmx->nested.smm.guest_mode) - nested_vmx_vmexit(vcpu, -1, 0, 0); - - vmx->nested.smm.vmxon = vmx->nested.vmxon; - vmx->nested.vmxon = false; - vmx_clear_hlt(vcpu); - return 0; -} - -static int vmx_pre_leave_smm(struct kvm_vcpu *vcpu, const char *smstate) -{ - struct vcpu_vmx *vmx = to_vmx(vcpu); - int ret; - - if (vmx->nested.smm.vmxon) { - vmx->nested.vmxon = true; - vmx->nested.smm.vmxon = false; - } - - if (vmx->nested.smm.guest_mode) { - ret = nested_vmx_enter_non_root_mode(vcpu, false); - if (ret) - return ret; - - vmx->nested.smm.guest_mode = false; - } - return 0; -} - -static int enable_smi_window(struct kvm_vcpu *vcpu) -{ - return 0; -} - -static bool vmx_need_emulation_on_page_fault(struct kvm_vcpu *vcpu) -{ - return false; -} - -static bool vmx_apic_init_signal_blocked(struct kvm_vcpu *vcpu) -{ - return to_vmx(vcpu)->nested.vmxon; -} - -static __init int hardware_setup(void) -{ - unsigned long host_bndcfgs; - struct desc_ptr dt; - int r, i; - - rdmsrl_safe(MSR_EFER, &host_efer); - - store_idt(&dt); - host_idt_base = dt.address; - - for (i = 0; i < ARRAY_SIZE(vmx_msr_index); ++i) - kvm_define_shared_msr(i, vmx_msr_index[i]); - - if (setup_vmcs_config(&vmcs_config, &vmx_capability) < 0) - return -EIO; - - if (boot_cpu_has(X86_FEATURE_NX)) - kvm_enable_efer_bits(EFER_NX); - - if (boot_cpu_has(X86_FEATURE_MPX)) { - rdmsrl(MSR_IA32_BNDCFGS, host_bndcfgs); - WARN_ONCE(host_bndcfgs, "KVM: BNDCFGS in host will be lost"); - } - - if (!cpu_has_vmx_vpid() || !cpu_has_vmx_invvpid() || - !(cpu_has_vmx_invvpid_single() || cpu_has_vmx_invvpid_global())) - enable_vpid = 0; - - if (!cpu_has_vmx_ept() || - !cpu_has_vmx_ept_4levels() || - !cpu_has_vmx_ept_mt_wb() || - !cpu_has_vmx_invept_global()) - enable_ept = 0; - - if (!cpu_has_vmx_ept_ad_bits() || !enable_ept) - enable_ept_ad_bits = 0; - - if (!cpu_has_vmx_unrestricted_guest() || !enable_ept) - enable_unrestricted_guest = 0; - - if (!cpu_has_vmx_flexpriority()) - flexpriority_enabled = 0; - - if (!cpu_has_virtual_nmis()) - enable_vnmi = 0; - - /* - * set_apic_access_page_addr() is used to reload apic access - * page upon invalidation. No need to do anything if not - * using the APIC_ACCESS_ADDR VMCS field. - */ - if (!flexpriority_enabled) - kvm_x86_ops->set_apic_access_page_addr = NULL; - - if (!cpu_has_vmx_tpr_shadow()) - kvm_x86_ops->update_cr8_intercept = NULL; - - if (enable_ept && !cpu_has_vmx_ept_2m_page()) - kvm_disable_largepages(); - -#if IS_ENABLED(CONFIG_HYPERV) - if (ms_hyperv.nested_features & HV_X64_NESTED_GUEST_MAPPING_FLUSH - && enable_ept) { - kvm_x86_ops->tlb_remote_flush = hv_remote_flush_tlb; - kvm_x86_ops->tlb_remote_flush_with_range = - hv_remote_flush_tlb_with_range; - } -#endif - - if (!cpu_has_vmx_ple()) { - ple_gap = 0; - ple_window = 0; - ple_window_grow = 0; - ple_window_max = 0; - ple_window_shrink = 0; - } - - if (!cpu_has_vmx_apicv()) { - enable_apicv = 0; - kvm_x86_ops->sync_pir_to_irr = NULL; - } - - if (cpu_has_vmx_tsc_scaling()) { - kvm_has_tsc_control = true; - kvm_max_tsc_scaling_ratio = KVM_VMX_TSC_MULTIPLIER_MAX; - kvm_tsc_scaling_ratio_frac_bits = 48; - } - - set_bit(0, vmx_vpid_bitmap); /* 0 is reserved for host */ - - if (enable_ept) - vmx_enable_tdp(); - else - kvm_disable_tdp(); - - /* - * Only enable PML when hardware supports PML feature, and both EPT - * and EPT A/D bit features are enabled -- PML depends on them to work. - */ - if (!enable_ept || !enable_ept_ad_bits || !cpu_has_vmx_pml()) - enable_pml = 0; - - if (!enable_pml) { - kvm_x86_ops->slot_enable_log_dirty = NULL; - kvm_x86_ops->slot_disable_log_dirty = NULL; - kvm_x86_ops->flush_log_dirty = NULL; - kvm_x86_ops->enable_log_dirty_pt_masked = NULL; - } - - if (!cpu_has_vmx_preemption_timer()) - enable_preemption_timer = false; - - if (enable_preemption_timer) { - u64 use_timer_freq = 5000ULL * 1000 * 1000; - u64 vmx_msr; - - rdmsrl(MSR_IA32_VMX_MISC, vmx_msr); - cpu_preemption_timer_multi = - vmx_msr & VMX_MISC_PREEMPTION_TIMER_RATE_MASK; - - if (tsc_khz) - use_timer_freq = (u64)tsc_khz * 1000; - use_timer_freq >>= cpu_preemption_timer_multi; - - /* - * KVM "disables" the preemption timer by setting it to its max - * value. Don't use the timer if it might cause spurious exits - * at a rate faster than 0.1 Hz (of uninterrupted guest time). - */ - if (use_timer_freq > 0xffffffffu / 10) - enable_preemption_timer = false; - } - - if (!enable_preemption_timer) { - kvm_x86_ops->set_hv_timer = NULL; - kvm_x86_ops->cancel_hv_timer = NULL; - kvm_x86_ops->request_immediate_exit = __kvm_request_immediate_exit; - } - - kvm_set_posted_intr_wakeup_handler(wakeup_handler); - - kvm_mce_cap_supported |= MCG_LMCE_P; - - if (pt_mode != PT_MODE_SYSTEM && pt_mode != PT_MODE_HOST_GUEST) - return -EINVAL; - if (!enable_ept || !cpu_has_vmx_intel_pt()) - pt_mode = PT_MODE_SYSTEM; - - if (nested) { - nested_vmx_setup_ctls_msrs(&vmcs_config.nested, - vmx_capability.ept, enable_apicv); - - r = nested_vmx_hardware_setup(kvm_vmx_exit_handlers); - if (r) - return r; - } - - r = alloc_kvm_area(); - if (r) - nested_vmx_hardware_unsetup(); - return r; -} - -static __exit void hardware_unsetup(void) -{ - if (nested) - nested_vmx_hardware_unsetup(); - - free_kvm_area(); -} - -static struct kvm_x86_ops vmx_x86_ops __ro_after_init = { - .cpu_has_kvm_support = cpu_has_kvm_support, - .disabled_by_bios = vmx_disabled_by_bios, - .hardware_setup = hardware_setup, - .hardware_unsetup = hardware_unsetup, - .check_processor_compatibility = vmx_check_processor_compat, - .hardware_enable = hardware_enable, - .hardware_disable = hardware_disable, - .cpu_has_accelerated_tpr = report_flexpriority, - .has_emulated_msr = vmx_has_emulated_msr, - - .vm_init = vmx_vm_init, - .vm_alloc = vmx_vm_alloc, - .vm_free = vmx_vm_free, - - .vcpu_create = vmx_create_vcpu, - .vcpu_free = vmx_free_vcpu, - .vcpu_reset = vmx_vcpu_reset, - - .prepare_guest_switch = vmx_prepare_switch_to_guest, - .vcpu_load = vmx_vcpu_load, - .vcpu_put = vmx_vcpu_put, - - .update_bp_intercept = update_exception_bitmap, - .get_msr_feature = vmx_get_msr_feature, - .get_msr = vmx_get_msr, - .set_msr = vmx_set_msr, - .get_segment_base = vmx_get_segment_base, - .get_segment = vmx_get_segment, - .set_segment = vmx_set_segment, - .get_cpl = vmx_get_cpl, - .get_cs_db_l_bits = vmx_get_cs_db_l_bits, - .decache_cr0_guest_bits = vmx_decache_cr0_guest_bits, - .decache_cr4_guest_bits = vmx_decache_cr4_guest_bits, - .set_cr0 = vmx_set_cr0, - .set_cr3 = vmx_set_cr3, - .set_cr4 = vmx_set_cr4, - .set_efer = vmx_set_efer, - .get_idt = vmx_get_idt, - .set_idt = vmx_set_idt, - .get_gdt = vmx_get_gdt, - .set_gdt = vmx_set_gdt, - .get_dr6 = vmx_get_dr6, - .set_dr6 = vmx_set_dr6, - .set_dr7 = vmx_set_dr7, - .sync_dirty_debug_regs = vmx_sync_dirty_debug_regs, - .cache_reg = vmx_cache_reg, - .get_rflags = vmx_get_rflags, - .set_rflags = vmx_set_rflags, - - .tlb_flush = vmx_flush_tlb, - .tlb_flush_gva = vmx_flush_tlb_gva, - - .run = vmx_vcpu_run, - .handle_exit = vmx_handle_exit, - .skip_emulated_instruction = skip_emulated_instruction, - .set_interrupt_shadow = vmx_set_interrupt_shadow, - .get_interrupt_shadow = vmx_get_interrupt_shadow, - .patch_hypercall = vmx_patch_hypercall, - .set_irq = vmx_inject_irq, - .set_nmi = vmx_inject_nmi, - .queue_exception = vmx_queue_exception, - .cancel_injection = vmx_cancel_injection, - .interrupt_allowed = vmx_interrupt_allowed, - .nmi_allowed = vmx_nmi_allowed, - .get_nmi_mask = vmx_get_nmi_mask, - .set_nmi_mask = vmx_set_nmi_mask, - .enable_nmi_window = enable_nmi_window, - .enable_irq_window = enable_irq_window, - .update_cr8_intercept = update_cr8_intercept, - .set_virtual_apic_mode = vmx_set_virtual_apic_mode, - .set_apic_access_page_addr = vmx_set_apic_access_page_addr, - .get_enable_apicv = vmx_get_enable_apicv, - .refresh_apicv_exec_ctrl = vmx_refresh_apicv_exec_ctrl, - .load_eoi_exitmap = vmx_load_eoi_exitmap, - .apicv_post_state_restore = vmx_apicv_post_state_restore, - .hwapic_irr_update = vmx_hwapic_irr_update, - .hwapic_isr_update = vmx_hwapic_isr_update, - .guest_apic_has_interrupt = vmx_guest_apic_has_interrupt, - .sync_pir_to_irr = vmx_sync_pir_to_irr, - .deliver_posted_interrupt = vmx_deliver_posted_interrupt, - .dy_apicv_has_pending_interrupt = vmx_dy_apicv_has_pending_interrupt, - - .set_tss_addr = vmx_set_tss_addr, - .set_identity_map_addr = vmx_set_identity_map_addr, - .get_tdp_level = get_ept_level, - .get_mt_mask = vmx_get_mt_mask, - - .get_exit_info = vmx_get_exit_info, - - .get_lpage_level = vmx_get_lpage_level, - - .cpuid_update = vmx_cpuid_update, - - .rdtscp_supported = vmx_rdtscp_supported, - .invpcid_supported = vmx_invpcid_supported, - - .set_supported_cpuid = vmx_set_supported_cpuid, - - .has_wbinvd_exit = cpu_has_vmx_wbinvd_exit, - - .read_l1_tsc_offset = vmx_read_l1_tsc_offset, - .write_l1_tsc_offset = vmx_write_l1_tsc_offset, - - .set_tdp_cr3 = vmx_set_cr3, - - .check_intercept = vmx_check_intercept, - .handle_exit_irqoff = vmx_handle_exit_irqoff, - .mpx_supported = vmx_mpx_supported, - .xsaves_supported = vmx_xsaves_supported, - .umip_emulated = vmx_umip_emulated, - .pt_supported = vmx_pt_supported, - - .request_immediate_exit = vmx_request_immediate_exit, - - .sched_in = vmx_sched_in, - - .slot_enable_log_dirty = vmx_slot_enable_log_dirty, - .slot_disable_log_dirty = vmx_slot_disable_log_dirty, - .flush_log_dirty = vmx_flush_log_dirty, - .enable_log_dirty_pt_masked = vmx_enable_log_dirty_pt_masked, - .write_log_dirty = vmx_write_pml_buffer, - - .pre_block = vmx_pre_block, - .post_block = vmx_post_block, - - .pmu_ops = &intel_pmu_ops, - - .update_pi_irte = vmx_update_pi_irte, - -#ifdef CONFIG_X86_64 - .set_hv_timer = vmx_set_hv_timer, - .cancel_hv_timer = vmx_cancel_hv_timer, -#endif - - .setup_mce = vmx_setup_mce, - - .smi_allowed = vmx_smi_allowed, - .pre_enter_smm = vmx_pre_enter_smm, - .pre_leave_smm = vmx_pre_leave_smm, - .enable_smi_window = enable_smi_window, - - .check_nested_events = NULL, - .get_nested_state = NULL, - .set_nested_state = NULL, - .get_vmcs12_pages = NULL, - .nested_enable_evmcs = NULL, - .nested_get_evmcs_version = NULL, - .need_emulation_on_page_fault = vmx_need_emulation_on_page_fault, - .apic_init_signal_blocked = vmx_apic_init_signal_blocked, -}; - -static void vmx_cleanup_l1d_flush(void) -{ - if (vmx_l1d_flush_pages) { - free_pages((unsigned long)vmx_l1d_flush_pages, L1D_CACHE_ORDER); - vmx_l1d_flush_pages = NULL; - } - /* Restore state so sysfs ignores VMX */ - l1tf_vmx_mitigation = VMENTER_L1D_FLUSH_AUTO; -} - -static void vmx_exit(void) -{ -#ifdef CONFIG_KEXEC_CORE - RCU_INIT_POINTER(crash_vmclear_loaded_vmcss, NULL); - synchronize_rcu(); -#endif - - kvm_exit(); - -#if IS_ENABLED(CONFIG_HYPERV) - if (static_branch_unlikely(&enable_evmcs)) { - int cpu; - struct hv_vp_assist_page *vp_ap; - /* - * Reset everything to support using non-enlightened VMCS - * access later (e.g. when we reload the module with - * enlightened_vmcs=0) - */ - for_each_online_cpu(cpu) { - vp_ap = hv_get_vp_assist_page(cpu); - - if (!vp_ap) - continue; - - vp_ap->nested_control.features.directhypercall = 0; - vp_ap->current_nested_vmcs = 0; - vp_ap->enlighten_vmentry = 0; - } - - static_branch_disable(&enable_evmcs); - } -#endif - vmx_cleanup_l1d_flush(); -} -module_exit(vmx_exit); - -static int __init vmx_init(void) -{ - int r; - -#if IS_ENABLED(CONFIG_HYPERV) - /* - * Enlightened VMCS usage should be recommended and the host needs - * to support eVMCS v1 or above. We can also disable eVMCS support - * with module parameter. - */ - if (enlightened_vmcs && - ms_hyperv.hints & HV_X64_ENLIGHTENED_VMCS_RECOMMENDED && - (ms_hyperv.nested_features & HV_X64_ENLIGHTENED_VMCS_VERSION) >= - KVM_EVMCS_VERSION) { - int cpu; - - /* Check that we have assist pages on all online CPUs */ - for_each_online_cpu(cpu) { - if (!hv_get_vp_assist_page(cpu)) { - enlightened_vmcs = false; - break; - } - } - - if (enlightened_vmcs) { - pr_info("KVM: vmx: using Hyper-V Enlightened VMCS\n"); - static_branch_enable(&enable_evmcs); - } - - if (ms_hyperv.nested_features & HV_X64_NESTED_DIRECT_FLUSH) - vmx_x86_ops.enable_direct_tlbflush - = hv_enable_direct_tlbflush; - - } else { - enlightened_vmcs = false; - } -#endif - - r = kvm_init(&vmx_x86_ops, sizeof(struct vcpu_vmx), - __alignof__(struct vcpu_vmx), THIS_MODULE); - if (r) - return r; - - /* - * Must be called after kvm_init() so enable_ept is properly set - * up. Hand the parameter mitigation value in which was stored in - * the pre module init parser. If no parameter was given, it will - * contain 'auto' which will be turned into the default 'cond' - * mitigation mode. - */ - r = vmx_setup_l1d_flush(vmentry_l1d_flush_param); - if (r) { - vmx_exit(); - return r; - } - -#ifdef CONFIG_KEXEC_CORE - rcu_assign_pointer(crash_vmclear_loaded_vmcss, - crash_vmclear_local_loaded_vmcss); -#endif - vmx_check_vmcs12_offsets(); - - return 0; -} -module_init(vmx_init);
From: Paul Kocialkowski paul.kocialkowski@bootlin.com
[ Upstream commit fd1a5e521c3c083bb43ea731aae0f8b95f12b9bd ]
psbfb_probe performs an evaluation of the required size from the stolen GTT memory, but gets it wrong in two distinct ways: - The resulting size must be page-size-aligned; - The size to allocate is derived from the surface dimensions, not the fb dimensions.
When two connectors are connected with different modes, the smallest will be stored in the fb dimensions, but the size that needs to be allocated must match the largest (surface) dimensions. This is what is used in the actual allocation code.
Fix this by correcting the evaluation to conform to the two points above. It allows correctly switching to 16bpp when one connector is e.g. 1920x1080 and the other is 1024x768.
Signed-off-by: Paul Kocialkowski paul.kocialkowski@bootlin.com Signed-off-by: Patrik Jakobsson patrik.r.jakobsson@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20191107153048.843881-1-paul.k... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/gma500/framebuffer.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c index 3a44e705db538..d224fc12b7571 100644 --- a/drivers/gpu/drm/gma500/framebuffer.c +++ b/drivers/gpu/drm/gma500/framebuffer.c @@ -516,6 +516,7 @@ static int psbfb_probe(struct drm_fb_helper *helper, container_of(helper, struct psb_fbdev, psb_fb_helper); struct drm_device *dev = psb_fbdev->psb_fb_helper.dev; struct drm_psb_private *dev_priv = dev->dev_private; + unsigned int fb_size; int bytespp;
bytespp = sizes->surface_bpp / 8; @@ -525,8 +526,11 @@ static int psbfb_probe(struct drm_fb_helper *helper, /* If the mode will not fit in 32bit then switch to 16bit to get a console on full resolution. The X mode setting server will allocate its own 32bit GEM framebuffer */ - if (ALIGN(sizes->fb_width * bytespp, 64) * sizes->fb_height > - dev_priv->vram_stolen_size) { + fb_size = ALIGN(sizes->surface_width * bytespp, 64) * + sizes->surface_height; + fb_size = ALIGN(fb_size, PAGE_SIZE); + + if (fb_size > dev_priv->vram_stolen_size) { sizes->surface_bpp = 16; sizes->surface_depth = 16; }
From: Peter Zijlstra peterz@infradead.org
[ Upstream commit 45178ac0cea853fe0e405bf11e101bdebea57b15 ]
Paul reported a very sporadic, rcutorture induced, workqueue failure. When the planets align, the workqueue rescuer's self-migrate fails and then triggers a WARN for running a work on the wrong CPU.
Tejun then figured that set_cpus_allowed_ptr()'s stop_one_cpu() call could be ignored! When stopper->enabled is false, stop_machine will insta complete the work, without actually doing the work. Worse, it will not WARN about this (we really should fix this).
It turns out there is a small window where a freshly online'ed CPU is marked 'online' but doesn't yet have the stopper task running:
BP AP
bringup_cpu() __cpu_up(cpu, idle) --> start_secondary() ... cpu_startup_entry() bringup_wait_for_ap() wait_for_ap_thread() <-- cpuhp_online_idle() while (1) do_idle()
... available to run kthreads ...
stop_machine_unpark() stopper->enable = true;
Close this by moving the stop_machine_unpark() into cpuhp_online_idle(), such that the stopper thread is ready before we start the idle loop and schedule.
Reported-by: "Paul E. McKenney" paulmck@kernel.org Debugged-by: Tejun Heo tj@kernel.org Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Tested-by: "Paul E. McKenney" paulmck@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/cpu.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/kernel/cpu.c b/kernel/cpu.c index c2573e858009b..1fbe93fefc1fa 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -515,8 +515,7 @@ static int bringup_wait_for_ap(unsigned int cpu) if (WARN_ON_ONCE((!cpu_online(cpu)))) return -ECANCELED;
- /* Unpark the stopper thread and the hotplug thread of the target cpu */ - stop_machine_unpark(cpu); + /* Unpark the hotplug thread of the target cpu */ kthread_unpark(st->thread);
/* @@ -1115,8 +1114,8 @@ void notify_cpu_starting(unsigned int cpu)
/* * Called from the idle task. Wake up the controlling task which brings the - * stopper and the hotplug thread of the upcoming CPU up and then delegates - * the rest of the online bringup to the hotplug thread. + * hotplug thread of the upcoming CPU up and then delegates the rest of the + * online bringup to the hotplug thread. */ void cpuhp_online_idle(enum cpuhp_state state) { @@ -1126,6 +1125,12 @@ void cpuhp_online_idle(enum cpuhp_state state) if (state != CPUHP_AP_ONLINE_IDLE) return;
+ /* + * Unpart the stopper thread before we start the idle loop (and start + * scheduling); this ensures the stopper task is always available. + */ + stop_machine_unpark(smp_processor_id()); + st->state = CPUHP_AP_ONLINE_IDLE; complete(&st->done); }
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit 216b44000ada87a63891a8214c347e05a4aea8fe ]
The brcmu_pkt_buf_free_skb() function frees "pkt" so it leads to a static checker warning:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:1974 brcmf_sdio_readframes() error: dereferencing freed memory 'pkt'
It looks like there was supposed to be a continue after we free "pkt".
Fixes: 4754fceeb9a6 ("brcmfmac: streamline SDIO read frame routine") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Acked-by: Franky Lin franky.lin@broadcom.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index de52d826eb248..998a4bd6db78a 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -1921,6 +1921,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) BRCMF_SDIO_FT_NORMAL)) { rd->len = 0; brcmu_pkt_buf_free_skb(pkt); + continue; } bus->sdcnt.rx_readahead_cnt++; if (rd->len != roundup(rd_new.len, 16)) {
From: Vladimir Oltean olteanv@gmail.com
[ Upstream commit c26a2c2ddc0115eb088873f5c309cf46b982f522 ]
The driver wrongly assumes that it is the only entity that can set the SKBTX_IN_PROGRESS bit of the current skb. Therefore, in the gfar_clean_tx_ring function, where the TX timestamp is collected if necessary, the aforementioned bit is used to discriminate whether or not the TX timestamp should be delivered to the socket's error queue.
But a stacked driver such as a DSA switch can also set the SKBTX_IN_PROGRESS bit, which is actually exactly what it should do in order to denote that the hardware timestamping process is undergoing.
Therefore, gianfar would misinterpret the "in progress" bit as being its own, and deliver a second skb clone in the socket's error queue, completely throwing off a PTP process which is not expecting to receive it, _even though_ TX timestamping is not enabled for gianfar.
There have been discussions [0] as to whether non-MAC drivers need or not to set SKBTX_IN_PROGRESS at all (whose purpose is to avoid sending 2 timestamps, a sw and a hw one, to applications which only expect one). But as of this patch, there are at least 2 PTP drivers that would break in conjunction with gianfar: the sja1105 DSA switch and the felix switch, by way of its ocelot core driver.
So regardless of that conclusion, fix the gianfar driver to not do stuff based on flags set by others and not intended for it.
[0]: https://www.spinics.net/lists/netdev/msg619699.html
Fixes: f0ee7acfcdd4 ("gianfar: Add hardware TX timestamping support") Signed-off-by: Vladimir Oltean olteanv@gmail.com Acked-by: Richard Cochran richardcochran@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/gianfar.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 60bd1b36df606..b665d27f8e299 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -2688,13 +2688,17 @@ static void gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue) skb_dirtytx = tx_queue->skb_dirtytx;
while ((skb = tx_queue->tx_skbuff[skb_dirtytx])) { + bool do_tstamp; + + do_tstamp = (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && + priv->hwts_tx_en;
frags = skb_shinfo(skb)->nr_frags;
/* When time stamping, one additional TxBD must be freed. * Also, we need to dma_unmap_single() the TxPAL. */ - if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS)) + if (unlikely(do_tstamp)) nr_txbds = frags + 2; else nr_txbds = frags + 1; @@ -2708,7 +2712,7 @@ static void gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue) (lstatus & BD_LENGTH_MASK)) break;
- if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS)) { + if (unlikely(do_tstamp)) { next = next_txbd(bdp, base, tx_ring_size); buflen = be16_to_cpu(next->length) + GMAC_FCB_LEN + GMAC_TXPAL_LEN; @@ -2718,7 +2722,7 @@ static void gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue) dma_unmap_single(priv->dev, be32_to_cpu(bdp->bufPtr), buflen, DMA_TO_DEVICE);
- if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS)) { + if (unlikely(do_tstamp)) { struct skb_shared_hwtstamps shhwtstamps; u64 *ns = (u64 *)(((uintptr_t)skb->data + 0x10) & ~0x7UL);
From: Geert Uytterhoeven geert+renesas@glider.be
[ Upstream commit 55b1cb1f03ad5eea39897d0c74035e02deddcff2 ]
pinmux_func_gpios[] contains a hole due to the missing function GPIO definition for the "CTX0&CTX1" signal, which is the logical "AND" of the two CAN outputs.
Fix this by: - Renaming CRX0_CRX1_MARK to CTX0_CTX1_MARK, as PJ2MD[2:0]=010 configures the combined "CTX0&CTX1" output signal, - Renaming CRX0X1_MARK to CRX0_CRX1_MARK, as PJ3MD[1:0]=10 configures the shared "CRX0/CRX1" input signal, which is fed to both CAN inputs, - Adding the missing function GPIO definition for "CTX0&CTX1" to pinmux_func_gpios[], - Moving all CAN enums next to each other.
See SH7262 Group, SH7264 Group User's Manual: Hardware, Rev. 4.00: [1] Figure 1.2 (3) (Pin Assignment for the SH7264 Group (1-Mbyte Version), [2] Figure 1.2 (4) Pin Assignment for the SH7264 Group (640-Kbyte Version, [3] Table 1.4 List of Pins, [4] Figure 20.29 Connection Example when Using This Module as 1-Channel Module (64 Mailboxes x 1 Channel), [5] Table 32.10 Multiplexed Pins (Port J), [6] Section 32.2.30 (3) Port J Control Register 0 (PJCR0).
Note that the last 2 disagree about PJ2MD[2:0], which is probably the root cause of this bug. But considering [4], "CTx0&CTx1" in [5] must be correct, and "CRx0&CRx1" in [6] must be wrong.
Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://lore.kernel.org/r/20191218194812.12741-4-geert+renesas@glider.be Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/sh-pfc/pfc-sh7264.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7264.c b/drivers/pinctrl/sh-pfc/pfc-sh7264.c index e1c34e19222ee..3ddb9565ed804 100644 --- a/drivers/pinctrl/sh-pfc/pfc-sh7264.c +++ b/drivers/pinctrl/sh-pfc/pfc-sh7264.c @@ -500,17 +500,15 @@ enum { SD_WP_MARK, SD_CLK_MARK, SD_CMD_MARK, CRX0_MARK, CRX1_MARK, CTX0_MARK, CTX1_MARK, + CRX0_CRX1_MARK, CTX0_CTX1_MARK,
PWM1A_MARK, PWM1B_MARK, PWM1C_MARK, PWM1D_MARK, PWM1E_MARK, PWM1F_MARK, PWM1G_MARK, PWM1H_MARK, PWM2A_MARK, PWM2B_MARK, PWM2C_MARK, PWM2D_MARK, PWM2E_MARK, PWM2F_MARK, PWM2G_MARK, PWM2H_MARK, IERXD_MARK, IETXD_MARK, - CRX0_CRX1_MARK, WDTOVF_MARK,
- CRX0X1_MARK, - /* DMAC */ TEND0_MARK, DACK0_MARK, DREQ0_MARK, TEND1_MARK, DACK1_MARK, DREQ1_MARK, @@ -998,12 +996,12 @@ static const u16 pinmux_data[] = {
PINMUX_DATA(PJ3_DATA, PJ3MD_00), PINMUX_DATA(CRX1_MARK, PJ3MD_01), - PINMUX_DATA(CRX0X1_MARK, PJ3MD_10), + PINMUX_DATA(CRX0_CRX1_MARK, PJ3MD_10), PINMUX_DATA(IRQ1_PJ_MARK, PJ3MD_11),
PINMUX_DATA(PJ2_DATA, PJ2MD_000), PINMUX_DATA(CTX1_MARK, PJ2MD_001), - PINMUX_DATA(CRX0_CRX1_MARK, PJ2MD_010), + PINMUX_DATA(CTX0_CTX1_MARK, PJ2MD_010), PINMUX_DATA(CS2_MARK, PJ2MD_011), PINMUX_DATA(SCK0_MARK, PJ2MD_100), PINMUX_DATA(LCD_M_DISP_MARK, PJ2MD_101), @@ -1248,6 +1246,7 @@ static const struct pinmux_func pinmux_func_gpios[] = { GPIO_FN(CTX1), GPIO_FN(CRX1), GPIO_FN(CTX0), + GPIO_FN(CTX0_CTX1), GPIO_FN(CRX0), GPIO_FN(CRX0_CRX1),
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit 3c911fe799d1c338d94b78e7182ad452c37af897 ]
In the probe function, some resources are allocated using 'dma_alloc_wc()', they should be released with 'dma_free_wc()', not 'dma_free_coherent()'.
We already use 'dma_free_wc()' in the remove function, but not in the error handling path of the probe function.
Also, remove a useless 'PAGE_ALIGN()'. 'info->fix.smem_len' is already PAGE_ALIGNed.
Fixes: 638772c7553f ("fb: add support of LCD display controller on pxa168/910 (base layer)") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Reviewed-by: Lubomir Rintel lkundrak@v3.sk CC: YueHaibing yuehaibing@huawei.com Signed-off-by: Bartlomiej Zolnierkiewicz b.zolnierkie@samsung.com Link: https://patchwork.freedesktop.org/patch/msgid/20190831100024.3248-1-christop... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/pxa168fb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/video/fbdev/pxa168fb.c b/drivers/video/fbdev/pxa168fb.c index d059d04c63acd..20195d3dbf088 100644 --- a/drivers/video/fbdev/pxa168fb.c +++ b/drivers/video/fbdev/pxa168fb.c @@ -769,8 +769,8 @@ failed_free_cmap: failed_free_clk: clk_disable_unprepare(fbi->clk); failed_free_fbmem: - dma_free_coherent(fbi->dev, info->fix.smem_len, - info->screen_base, fbi->fb_start_dma); + dma_free_wc(fbi->dev, info->fix.smem_len, + info->screen_base, fbi->fb_start_dma); failed_free_info: kfree(info);
@@ -804,7 +804,7 @@ static int pxa168fb_remove(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
- dma_free_wc(fbi->dev, PAGE_ALIGN(info->fix.smem_len), + dma_free_wc(fbi->dev, info->fix.smem_len, info->screen_base, info->fix.smem_start);
clk_disable_unprepare(fbi->clk);
From: Eugen Hristev eugen.hristev@microchip.com
[ Upstream commit 1451d5ae351d938a0ab1677498c893f17b9ee21d ]
This driver supports both the mt9v032 (color) and the mt9v022 (mono) sensors. Depending on which sensor is used, the format from the sensor is different. The format.code inside the dev struct holds this information. The enum mbus and enum frame sizes need to take into account both type of sensors, not just the color one. To solve this, use the format.code in these functions instead of the hardcoded bayer color format (which is only used for mt9v032).
[Sakari Ailus: rewrapped commit message]
Suggested-by: Wenyou Yang wenyou.yang@microchip.com Signed-off-by: Eugen Hristev eugen.hristev@microchip.com Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/i2c/mt9v032.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c index 58eb62f1ba214..a018a76662df7 100644 --- a/drivers/media/i2c/mt9v032.c +++ b/drivers/media/i2c/mt9v032.c @@ -423,10 +423,12 @@ static int mt9v032_enum_mbus_code(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_mbus_code_enum *code) { + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + if (code->index > 0) return -EINVAL;
- code->code = MEDIA_BUS_FMT_SGRBG10_1X10; + code->code = mt9v032->format.code; return 0; }
@@ -434,7 +436,11 @@ static int mt9v032_enum_frame_size(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_frame_size_enum *fse) { - if (fse->index >= 3 || fse->code != MEDIA_BUS_FMT_SGRBG10_1X10) + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + + if (fse->index >= 3) + return -EINVAL; + if (mt9v032->format.code != fse->code) return -EINVAL;
fse->min_width = MT9V032_WINDOW_WIDTH_DEF / (1 << fse->index);
From: Oliver O'Halloran oohall@gmail.com
[ Upstream commit 3b5b9997b331e77ce967eba2c4bc80dc3134a7fe ]
On pseries there is a bug with adding hotplugged devices to an IOMMU group. For a number of dumb reasons fixing that bug first requires re-working how VFs are configured on PowerNV. For background, on PowerNV we use the pcibios_sriov_enable() hook to do two things:
1. Create a pci_dn structure for each of the VFs, and 2. Configure the PHB's internal BARs so the MMIO range for each VF maps to a unique PE.
Roughly speaking a PE is the hardware counterpart to a Linux IOMMU group since all the devices in a PE share the same IOMMU table. A PE also defines the set of devices that should be isolated in response to a PCI error (i.e. bad DMA, UR/CA, AER events, etc). When isolated all MMIO and DMA traffic to and from devicein the PE is blocked by the root complex until the PE is recovered by the OS.
The requirement to block MMIO causes a giant headache because the P8 PHB generally uses a fixed mapping between MMIO addresses and PEs. As a result we need to delay configuring the IOMMU groups for device until after MMIO resources are assigned. For physical devices (i.e. non-VFs) the PE assignment is done in pcibios_setup_bridge() which is called immediately after the MMIO resources for downstream devices (and the bridge's windows) are assigned. For VFs the setup is more complicated because:
a) pcibios_setup_bridge() is not called again when VFs are activated, and b) The pci_dev for VFs are created by generic code which runs after pcibios_sriov_enable() is called.
The work around for this is a two step process:
1. A fixup in pcibios_add_device() is used to initialised the cached pe_number in pci_dn, then 2. A bus notifier then adds the device to the IOMMU group for the PE specified in pci_dn->pe_number.
A side effect fixing the pseries bug mentioned in the first paragraph is moving the fixup out of pcibios_add_device() and into pcibios_bus_add_device(), which is called much later. This results in step 2. failing because pci_dn->pe_number won't be initialised when the bus notifier is run.
We can fix this by removing the need for the fixup. The PE for a VF is known before the VF is even scanned so we can initialise pci_dn->pe_number pcibios_sriov_enable() instead. Unfortunately, moving the initialisation causes two problems:
1. We trip the WARN_ON() in the current fixup code, and 2. The EEH core clears pdn->pe_number when recovering a VF and relies on the fixup to correctly re-set it.
The only justification for either of these is a comment in eeh_rmv_device() suggesting that pdn->pe_number *must* be set to IODA_INVALID_PE in order for the VF to be scanned. However, this comment appears to have no basis in reality. Both bugs can be fixed by just deleting the code.
Tested-by: Alexey Kardashevskiy aik@ozlabs.ru Reviewed-by: Alexey Kardashevskiy aik@ozlabs.ru Signed-off-by: Oliver O'Halloran oohall@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20191028085424.12006-1-oohall@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/eeh_driver.c | 6 ------ arch/powerpc/platforms/powernv/pci-ioda.c | 19 +++++++++++++++---- arch/powerpc/platforms/powernv/pci.c | 4 ---- 3 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index 620e08d4eb6e2..adac3dee4c57e 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -520,12 +520,6 @@ static void *eeh_rmv_device(void *data, void *userdata)
pci_iov_remove_virtfn(edev->physfn, pdn->vf_index, 0); edev->pdev = NULL; - - /* - * We have to set the VF PE number to invalid one, which is - * required to plug the VF successfully. - */ - pdn->pe_number = IODA_INVALID_PE; #endif if (rmv_data) list_add(&edev->rmv_list, &rmv_data->edev_list); diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 3ec673b4ca6ce..b787a669a1e27 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -1524,6 +1524,10 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
/* Reserve PE for each VF */ for (vf_index = 0; vf_index < num_vfs; vf_index++) { + int vf_devfn = pci_iov_virtfn_devfn(pdev, vf_index); + int vf_bus = pci_iov_virtfn_bus(pdev, vf_index); + struct pci_dn *vf_pdn; + if (pdn->m64_single_mode) pe_num = pdn->pe_num_map[vf_index]; else @@ -1536,13 +1540,11 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs) pe->pbus = NULL; pe->parent_dev = pdev; pe->mve_number = -1; - pe->rid = (pci_iov_virtfn_bus(pdev, vf_index) << 8) | - pci_iov_virtfn_devfn(pdev, vf_index); + pe->rid = (vf_bus << 8) | vf_devfn;
pe_info(pe, "VF %04d:%02d:%02d.%d associated with PE#%d\n", hose->global_number, pdev->bus->number, - PCI_SLOT(pci_iov_virtfn_devfn(pdev, vf_index)), - PCI_FUNC(pci_iov_virtfn_devfn(pdev, vf_index)), pe_num); + PCI_SLOT(vf_devfn), PCI_FUNC(vf_devfn), pe_num);
if (pnv_ioda_configure_pe(phb, pe)) { /* XXX What do we do here ? */ @@ -1556,6 +1558,15 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs) list_add_tail(&pe->list, &phb->ioda.pe_list); mutex_unlock(&phb->ioda.pe_list_mutex);
+ /* associate this pe to it's pdn */ + list_for_each_entry(vf_pdn, &pdn->parent->child_list, list) { + if (vf_pdn->busno == vf_bus && + vf_pdn->devfn == vf_devfn) { + vf_pdn->pe_number = pe_num; + break; + } + } + pnv_pci_ioda2_setup_dma_pe(phb, pe); } } diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 00dbf1e895a9d..2ed7627e991e0 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -856,16 +856,12 @@ void pnv_pci_dma_dev_setup(struct pci_dev *pdev) struct pnv_phb *phb = hose->private_data; #ifdef CONFIG_PCI_IOV struct pnv_ioda_pe *pe; - struct pci_dn *pdn;
/* Fix the VF pdn PE number */ if (pdev->is_virtfn) { - pdn = pci_get_pdn(pdev); - WARN_ON(pdn->pe_number != IODA_INVALID_PE); list_for_each_entry(pe, &phb->ioda.pe_list, list) { if (pe->rid == ((pdev->bus->number << 8) | (pdev->devfn & 0xff))) { - pdn->pe_number = pe->pe_number; pe->pdev = pdev; break; }
From: Jia-Ju Bai baijiaju1990@gmail.com
[ Upstream commit e36eaf94be8f7bc4e686246eed3cf92d845e2ef8 ]
The driver may sleep while holding a spinlock. The function call path (from bottom to top) in Linux 4.19 is:
drivers/gpio/gpio-grgpio.c, 261: request_irq in grgpio_irq_map drivers/gpio/gpio-grgpio.c, 255: _raw_spin_lock_irqsave in grgpio_irq_map
drivers/gpio/gpio-grgpio.c, 318: free_irq in grgpio_irq_unmap drivers/gpio/gpio-grgpio.c, 299: _raw_spin_lock_irqsave in grgpio_irq_unmap
request_irq() and free_irq() can sleep at runtime.
To fix these bugs, request_irq() and free_irq() are called without holding the spinlock.
These bugs are found by a static analysis tool STCheck written by myself.
Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Link: https://lore.kernel.org/r/20191218132605.10594-1-baijiaju1990@gmail.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-grgpio.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/gpio/gpio-grgpio.c b/drivers/gpio/gpio-grgpio.c index 7847dd34f86fc..036a78b704270 100644 --- a/drivers/gpio/gpio-grgpio.c +++ b/drivers/gpio/gpio-grgpio.c @@ -259,17 +259,16 @@ static int grgpio_irq_map(struct irq_domain *d, unsigned int irq, lirq->irq = irq; uirq = &priv->uirqs[lirq->index]; if (uirq->refcnt == 0) { + spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); ret = request_irq(uirq->uirq, grgpio_irq_handler, 0, dev_name(priv->dev), priv); if (ret) { dev_err(priv->dev, "Could not request underlying irq %d\n", uirq->uirq); - - spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); - return ret; } + spin_lock_irqsave(&priv->gc.bgpio_lock, flags); } uirq->refcnt++;
@@ -315,8 +314,11 @@ static void grgpio_irq_unmap(struct irq_domain *d, unsigned int irq) if (index >= 0) { uirq = &priv->uirqs[lirq->index]; uirq->refcnt--; - if (uirq->refcnt == 0) + if (uirq->refcnt == 0) { + spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); free_irq(uirq->uirq, priv); + return; + } }
spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
From: Jia-Ju Bai baijiaju1990@gmail.com
[ Upstream commit bb6d42061a05d71dd73f620582d9e09c8fbf7f5b ]
The driver may sleep while holding a spinlock. The function call path (from bottom to top) in Linux 4.19 is:
drivers/media/platform/sti/bdisp/bdisp-hw.c, 385: msleep in bdisp_hw_reset drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 341: bdisp_hw_reset in bdisp_device_run drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 317: _raw_spin_lock_irqsave in bdisp_device_run
To fix this bug, msleep() is replaced with udelay().
This bug is found by a static analysis tool STCheck written by myself.
Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Reviewed-by: Fabien Dessenne fabien.dessenne@st.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/sti/bdisp/bdisp-hw.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/sti/bdisp/bdisp-hw.c b/drivers/media/platform/sti/bdisp/bdisp-hw.c index b7892f3efd988..5c4c3f0c57be1 100644 --- a/drivers/media/platform/sti/bdisp/bdisp-hw.c +++ b/drivers/media/platform/sti/bdisp/bdisp-hw.c @@ -14,8 +14,8 @@ #define MAX_SRC_WIDTH 2048
/* Reset & boot poll config */ -#define POLL_RST_MAX 50 -#define POLL_RST_DELAY_MS 20 +#define POLL_RST_MAX 500 +#define POLL_RST_DELAY_MS 2
enum bdisp_target_plan { BDISP_RGB, @@ -382,7 +382,7 @@ int bdisp_hw_reset(struct bdisp_dev *bdisp) for (i = 0; i < POLL_RST_MAX; i++) { if (readl(bdisp->regs + BLT_STA1) & BLT_STA1_IDLE) break; - msleep(POLL_RST_DELAY_MS); + udelay(POLL_RST_DELAY_MS * 1000); } if (i == POLL_RST_MAX) dev_err(bdisp->dev, "Reset timeout\n");
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit a23680594da7a9e2696dbcf4f023e9273e2fa40b ]
Suspending Goodix touchscreens requires changing the interrupt pin to output before sending them a power-down command. Followed by wiggling the interrupt pin to wake the device up, after which it is put back in input mode.
On Bay Trail devices with a Goodix touchscreen direct-irq mode is used in combination with listing the pin as a normal GpioIo resource.
This works fine, until the goodix driver gets rmmod-ed and then insmod-ed again. In this case byt_gpio_disable_free() calls byt_gpio_clear_triggering() which clears the IRQ flags and after that the (direct) IRQ no longer triggers.
This commit fixes this by adding a check for the BYT_DIRECT_IRQ_EN flag to byt_gpio_clear_triggering().
Note that byt_gpio_clear_triggering() only gets called from byt_gpio_disable_free() for direct-irq enabled pins, as these are excluded from the irq_valid mask by byt_init_irq_valid_mask().
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Mika Westerberg mika.westerberg@linux.intel.com Reviewed-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/intel/pinctrl-baytrail.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c index f83a2a60d9c9b..1e945aa77734b 100644 --- a/drivers/pinctrl/intel/pinctrl-baytrail.c +++ b/drivers/pinctrl/intel/pinctrl-baytrail.c @@ -958,7 +958,13 @@ static void byt_gpio_clear_triggering(struct byt_gpio *vg, unsigned int offset)
raw_spin_lock_irqsave(&byt_lock, flags); value = readl(reg); - value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL); + + /* Do not clear direct-irq enabled IRQs (from gpio_disable_free) */ + if (value & BYT_DIRECT_IRQ_EN) + /* nothing to do */ ; + else + value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL); + writel(value, reg); raw_spin_unlock_irqrestore(&byt_lock, flags); }
From: Ard Biesheuvel ardb@kernel.org
[ Upstream commit ffc2760bcf2dba0dbef74013ed73eea8310cc52c ]
Fix a couple of issues with the way we map and copy the vendor string: - we map only 2 bytes, which usually works since you get at least a page, but if the vendor string happens to cross a page boundary, a crash will result - only call early_memunmap() if early_memremap() succeeded, or we will call it with a NULL address which it doesn't like, - while at it, switch to early_memremap_ro(), and array indexing rather than pointer dereferencing to read the CHAR16 characters.
Signed-off-by: Ard Biesheuvel ardb@kernel.org Cc: Andy Lutomirski luto@kernel.org Cc: Ard Biesheuvel ard.biesheuvel@linaro.org Cc: Arvind Sankar nivedita@alum.mit.edu Cc: Matthew Garrett mjg59@google.com Cc: linux-efi@vger.kernel.org Fixes: 5b83683f32b1 ("x86: EFI runtime service support") Link: https://lkml.kernel.org/r/20200103113953.9571-5-ardb@kernel.org Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/platform/efi/efi.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index b6669d326545a..f08abdf8bb676 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -478,7 +478,6 @@ void __init efi_init(void) efi_char16_t *c16; char vendor[100] = "unknown"; int i = 0; - void *tmp;
#ifdef CONFIG_X86_32 if (boot_params.efi_info.efi_systab_hi || @@ -503,14 +502,16 @@ void __init efi_init(void) /* * Show what we know for posterity */ - c16 = tmp = early_memremap(efi.systab->fw_vendor, 2); + c16 = early_memremap_ro(efi.systab->fw_vendor, + sizeof(vendor) * sizeof(efi_char16_t)); if (c16) { - for (i = 0; i < sizeof(vendor) - 1 && *c16; ++i) - vendor[i] = *c16++; + for (i = 0; i < sizeof(vendor) - 1 && c16[i]; ++i) + vendor[i] = c16[i]; vendor[i] = '\0'; - } else + early_memunmap(c16, sizeof(vendor) * sizeof(efi_char16_t)); + } else { pr_err("Could not map the firmware vendor!\n"); - early_memunmap(tmp, 2); + }
pr_info("EFI v%u.%.02u by %s\n", efi.systab->hdr.revision >> 16,
From: Tiezhu Yang yangtiezhu@loongson.cn
[ Upstream commit 72d052e28d1d2363f9107be63ef3a3afdea6143c ]
If kzalloc fails, it should return -ENOMEM, otherwise may trigger a NULL pointer dereference.
Fixes: 3adeb2566b9b ("MIPS: Loongson: Improve LEFI firmware interface") Signed-off-by: Tiezhu Yang yangtiezhu@loongson.cn Signed-off-by: Paul Burton paulburton@kernel.org Cc: Ralf Baechle ralf@linux-mips.org Cc: Huacai Chen chenhc@lemote.com Cc: Jiaxun Yang jiaxun.yang@flygoat.com Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/loongson64/loongson-3/platform.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/mips/loongson64/loongson-3/platform.c b/arch/mips/loongson64/loongson-3/platform.c index 25a97cc0ee336..0db4cc3196ebd 100644 --- a/arch/mips/loongson64/loongson-3/platform.c +++ b/arch/mips/loongson64/loongson-3/platform.c @@ -31,6 +31,9 @@ static int __init loongson3_platform_init(void) continue;
pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL); + if (!pdev) + return -ENOMEM; + pdev->name = loongson_sysconf.sensors[i].name; pdev->id = loongson_sysconf.sensors[i].id; pdev->dev.platform_data = &loongson_sysconf.sensors[i];
From: David S. Miller davem@davemloft.net
[ Upstream commit 548f0b9a5f4cffa0cecf62eb12aa8db682e4eee6 ]
This fixes build errors of all sorts.
Also, emit .exit.text unconditionally.
Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- arch/sparc/kernel/vmlinux.lds.S | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S index 572db686f8458..385d6d04564d5 100644 --- a/arch/sparc/kernel/vmlinux.lds.S +++ b/arch/sparc/kernel/vmlinux.lds.S @@ -151,12 +151,14 @@ SECTIONS } PERCPU_SECTION(SMP_CACHE_BYTES)
-#ifdef CONFIG_JUMP_LABEL . = ALIGN(PAGE_SIZE); .exit.text : { EXIT_TEXT } -#endif + + .exit.data : { + EXIT_DATA + }
. = ALIGN(PAGE_SIZE); __init_end = .;
From: Jia-Ju Bai baijiaju1990@gmail.com
[ Upstream commit b74351287d4bd90636c3f48bc188c2f53824c2d4 ]
The driver may sleep while holding a spinlock. The function call path (from bottom to top) in Linux 4.19 is:
kernel/irq/manage.c, 523: synchronize_irq in disable_irq drivers/uio/uio_dmem_genirq.c, 140: disable_irq in uio_dmem_genirq_irqcontrol drivers/uio/uio_dmem_genirq.c, 134: _raw_spin_lock_irqsave in uio_dmem_genirq_irqcontrol
synchronize_irq() can sleep at runtime.
To fix this bug, disable_irq() is called without holding the spinlock.
This bug is found by a static analysis tool STCheck written by myself.
Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Link: https://lore.kernel.org/r/20191218094405.6009-1-baijiaju1990@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/uio/uio_dmem_genirq.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/uio/uio_dmem_genirq.c b/drivers/uio/uio_dmem_genirq.c index e1134a4d97f3f..a00b4aee6c799 100644 --- a/drivers/uio/uio_dmem_genirq.c +++ b/drivers/uio/uio_dmem_genirq.c @@ -135,11 +135,13 @@ static int uio_dmem_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on) if (irq_on) { if (test_and_clear_bit(0, &priv->flags)) enable_irq(dev_info->irq); + spin_unlock_irqrestore(&priv->lock, flags); } else { - if (!test_and_set_bit(0, &priv->flags)) + if (!test_and_set_bit(0, &priv->flags)) { + spin_unlock_irqrestore(&priv->lock, flags); disable_irq(dev_info->irq); + } } - spin_unlock_irqrestore(&priv->lock, flags);
return 0; }
From: Jia-Ju Bai baijiaju1990@gmail.com
[ Upstream commit 9c1ed62ae0690dfe5d5e31d8f70e70a95cb48e52 ]
The driver may sleep while holding a spinlock. The function call path (from bottom to top) in Linux 4.19 is:
drivers/usb/gadget/udc/core.c, 1175: kzalloc(GFP_KERNEL) in usb_add_gadget_udc_release drivers/usb/gadget/udc/core.c, 1272: usb_add_gadget_udc_release in usb_add_gadget_udc drivers/usb/gadget/udc/gr_udc.c, 2186: usb_add_gadget_udc in gr_probe drivers/usb/gadget/udc/gr_udc.c, 2183: spin_lock in gr_probe
drivers/usb/gadget/udc/core.c, 1195: mutex_lock in usb_add_gadget_udc_release drivers/usb/gadget/udc/core.c, 1272: usb_add_gadget_udc_release in usb_add_gadget_udc drivers/usb/gadget/udc/gr_udc.c, 2186: usb_add_gadget_udc in gr_probe drivers/usb/gadget/udc/gr_udc.c, 2183: spin_lock in gr_probe
drivers/usb/gadget/udc/gr_udc.c, 212: debugfs_create_file in gr_probe drivers/usb/gadget/udc/gr_udc.c, 2197: gr_dfs_create in gr_probe drivers/usb/gadget/udc/gr_udc.c, 2183: spin_lock in gr_probe
drivers/usb/gadget/udc/gr_udc.c, 2114: devm_request_threaded_irq in gr_request_irq drivers/usb/gadget/udc/gr_udc.c, 2202: gr_request_irq in gr_probe drivers/usb/gadget/udc/gr_udc.c, 2183: spin_lock in gr_probe
kzalloc(GFP_KERNEL), mutex_lock(), debugfs_create_file() and devm_request_threaded_irq() can sleep at runtime.
To fix these possible bugs, usb_add_gadget_udc(), gr_dfs_create() and gr_request_irq() are called without handling the spinlock.
These bugs are found by a static analysis tool STCheck written by myself.
Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/gr_udc.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c index 39b7136d31d9c..9e246d2e55ca3 100644 --- a/drivers/usb/gadget/udc/gr_udc.c +++ b/drivers/usb/gadget/udc/gr_udc.c @@ -2200,8 +2200,6 @@ static int gr_probe(struct platform_device *pdev) return -ENOMEM; }
- spin_lock(&dev->lock); - /* Inside lock so that no gadget can use this udc until probe is done */ retval = usb_add_gadget_udc(dev->dev, &dev->gadget); if (retval) { @@ -2210,15 +2208,21 @@ static int gr_probe(struct platform_device *pdev) } dev->added = 1;
+ spin_lock(&dev->lock); + retval = gr_udc_init(dev); - if (retval) + if (retval) { + spin_unlock(&dev->lock); goto out; - - gr_dfs_create(dev); + }
/* Clear all interrupt enables that might be left on since last boot */ gr_disable_interrupts_and_pullup(dev);
+ spin_unlock(&dev->lock); + + gr_dfs_create(dev); + retval = gr_request_irq(dev, dev->irq); if (retval) { dev_err(dev->dev, "Failed to request irq %d\n", dev->irq); @@ -2247,8 +2251,6 @@ static int gr_probe(struct platform_device *pdev) dev_info(dev->dev, "regs: %p, irq %d\n", dev->regs, dev->irq);
out: - spin_unlock(&dev->lock); - if (retval) gr_remove(pdev);
From: Kai Li li.kai4@h3c.com
[ Upstream commit a09decff5c32060639a685581c380f51b14e1fc2 ]
If the journal is dirty when the filesystem is mounted, jbd2 will replay the journal but the journal superblock will not be updated by journal_reset() because JBD2_ABORT flag is still set (it was set in journal_init_common()). This is problematic because when a new transaction is then committed, it will be recorded in block 1 (journal->j_tail was set to 1 in journal_reset()). If unclean shutdown happens again before the journal superblock is updated, the new recorded transaction will not be replayed during the next mount (because of stale sb->s_start and sb->s_sequence values) which can lead to filesystem corruption.
Fixes: 85e0c4e89c1b ("jbd2: if the journal is aborted then don't allow update of the log tail") Signed-off-by: Kai Li li.kai4@h3c.com Link: https://lore.kernel.org/r/20200111022542.5008-1-li.kai4@h3c.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jbd2/journal.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 3cbcf649ac660..40c754854b29e 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -1670,6 +1670,11 @@ int jbd2_journal_load(journal_t *journal) journal->j_devname); return -EFSCORRUPTED; } + /* + * clear JBD2_ABORT flag initialized in journal_init_common + * here to update log tail information with the newest seq. + */ + journal->j_flags &= ~JBD2_ABORT;
/* OK, we've finished with the dynamic journal bits: * reinitialise the dynamic contents of the superblock in memory @@ -1677,7 +1682,6 @@ int jbd2_journal_load(journal_t *journal) if (journal_reset(journal)) goto recovery_error;
- journal->j_flags &= ~JBD2_ABORT; journal->j_flags |= JBD2_LOADED; return 0;
From: Arvind Sankar nivedita@alum.mit.edu
[ Upstream commit dacc9092336be20b01642afe1a51720b31f60369 ]
When checking whether the reported lfb_size makes sense, the height * stride result is page-aligned before seeing whether it exceeds the reported size.
This doesn't work if height * stride is not an exact number of pages. For example, as reported in the kernel bugzilla below, an 800x600x32 EFI framebuffer gets skipped because of this.
Move the PAGE_ALIGN to after the check vs size.
Reported-by: Christopher Head chead@chead.ca Tested-by: Christopher Head chead@chead.ca Signed-off-by: Arvind Sankar nivedita@alum.mit.edu Signed-off-by: Borislav Petkov bp@suse.de Link: https://bugzilla.kernel.org/show_bug.cgi?id=206051 Link: https://lkml.kernel.org/r/20200107230410.2291947-1-nivedita@alum.mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/sysfb_simplefb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/sysfb_simplefb.c b/arch/x86/kernel/sysfb_simplefb.c index 85195d447a922..f3215346e47fd 100644 --- a/arch/x86/kernel/sysfb_simplefb.c +++ b/arch/x86/kernel/sysfb_simplefb.c @@ -94,11 +94,11 @@ __init int create_simplefb(const struct screen_info *si, if (si->orig_video_isVGA == VIDEO_TYPE_VLFB) size <<= 16; length = mode->height * mode->stride; - length = PAGE_ALIGN(length); if (length > size) { printk(KERN_WARNING "sysfb: VRAM smaller than advertised\n"); return -EINVAL; } + length = PAGE_ALIGN(length);
/* setup IORESOURCE_MEM as framebuffer memory */ memset(&res, 0, sizeof(res));
From: Luis Henriques luis.henriques@canonical.com
[ Upstream commit afccc00f75bbbee4e4ae833a96c2d29a7259c693 ]
tracing_stat_init() was always returning '0', even on the error paths. It now returns -ENODEV if tracing_init_dentry() fails or -ENOMEM if it fails to created the 'trace_stat' debugfs directory.
Link: http://lkml.kernel.org/r/1410299381-20108-1-git-send-email-luis.henriques@ca...
Fixes: ed6f1c996bfe4 ("tracing: Check return value of tracing_init_dentry()") Signed-off-by: Luis Henriques luis.henriques@canonical.com [ Pulled from the archeological digging of my INBOX ] Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/trace_stat.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/kernel/trace/trace_stat.c b/kernel/trace/trace_stat.c index 413ff108fbd05..bc97b10e56ccc 100644 --- a/kernel/trace/trace_stat.c +++ b/kernel/trace/trace_stat.c @@ -277,18 +277,22 @@ static int tracing_stat_init(void)
d_tracing = tracing_init_dentry(); if (IS_ERR(d_tracing)) - return 0; + return -ENODEV;
stat_dir = tracefs_create_dir("trace_stat", d_tracing); - if (!stat_dir) + if (!stat_dir) { pr_warn("Could not create tracefs 'trace_stat' entry\n"); + return -ENOMEM; + } return 0; }
static int init_stat_file(struct stat_session *session) { - if (!stat_dir && tracing_stat_init()) - return -ENODEV; + int ret; + + if (!stat_dir && (ret = tracing_stat_init())) + return ret;
session->file = tracefs_create_file(session->ts->name, 0644, stat_dir,
From: Steven Rostedt (VMware) rostedt@goodmis.org
[ Upstream commit dfb6cd1e654315168e36d947471bd2a0ccd834ae ]
Looking through old emails in my INBOX, I came across a patch from Luis Henriques that attempted to fix a race of two stat tracers registering the same stat trace (extremely unlikely, as this is done in the kernel, and probably doesn't even exist). The submitted patch wasn't quite right as it needed to deal with clean up a bit better (if two stat tracers were the same, it would have the same files).
But to make the code cleaner, all we needed to do is to keep the all_stat_sessions_mutex held for most of the registering function.
Link: http://lkml.kernel.org/r/1410299375-20068-1-git-send-email-luis.henriques@ca...
Fixes: 002bb86d8d42f ("tracing/ftrace: separate events tracing and stats tracing engine") Reported-by: Luis Henriques luis.henriques@canonical.com Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/trace_stat.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/kernel/trace/trace_stat.c b/kernel/trace/trace_stat.c index bc97b10e56ccc..d19f2191960ea 100644 --- a/kernel/trace/trace_stat.c +++ b/kernel/trace/trace_stat.c @@ -305,7 +305,7 @@ static int init_stat_file(struct stat_session *session) int register_stat_tracer(struct tracer_stat *trace) { struct stat_session *session, *node; - int ret; + int ret = -EINVAL;
if (!trace) return -EINVAL; @@ -316,17 +316,15 @@ int register_stat_tracer(struct tracer_stat *trace) /* Already registered? */ mutex_lock(&all_stat_sessions_mutex); list_for_each_entry(node, &all_stat_sessions, session_list) { - if (node->ts == trace) { - mutex_unlock(&all_stat_sessions_mutex); - return -EINVAL; - } + if (node->ts == trace) + goto out; } - mutex_unlock(&all_stat_sessions_mutex);
+ ret = -ENOMEM; /* Init the session */ session = kzalloc(sizeof(*session), GFP_KERNEL); if (!session) - return -ENOMEM; + goto out;
session->ts = trace; INIT_LIST_HEAD(&session->session_list); @@ -335,15 +333,16 @@ int register_stat_tracer(struct tracer_stat *trace) ret = init_stat_file(session); if (ret) { destroy_session(session); - return ret; + goto out; }
+ ret = 0; /* Register */ - mutex_lock(&all_stat_sessions_mutex); list_add_tail(&session->session_list, &all_stat_sessions); + out: mutex_unlock(&all_stat_sessions_mutex);
- return 0; + return ret; }
void unregister_stat_tracer(struct tracer_stat *trace)
From: zhangyi (F) yi.zhang@huawei.com
[ Upstream commit 51f57b01e4a3c7d7bdceffd84de35144e8c538e7 ]
JBD2_REC_ERR flag used to indicate the errno has been updated when jbd2 aborted, and then __ext4_abort() and ext4_handle_error() can invoke panic if ERRORS_PANIC is specified. But if the journal has been aborted with zero errno, jbd2_journal_abort() didn't set this flag so we can no longer panic. Fix this by always record the proper errno in the journal superblock.
Fixes: 4327ba52afd03 ("ext4, jbd2: ensure entering into panic after recording an error in superblock") Signed-off-by: zhangyi (F) yi.zhang@huawei.com Reviewed-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20191204124614.45424-3-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jbd2/checkpoint.c | 2 +- fs/jbd2/journal.c | 15 ++++----------- 2 files changed, 5 insertions(+), 12 deletions(-)
diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index 4d5a5a4cc017c..addb0784dd1c4 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -168,7 +168,7 @@ void __jbd2_log_wait_for_space(journal_t *journal) "journal space in %s\n", __func__, journal->j_devname); WARN_ON(1); - jbd2_journal_abort(journal, 0); + jbd2_journal_abort(journal, -EIO); } write_lock(&journal->j_state_lock); } else { diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 40c754854b29e..efc8cfd060730 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -2100,12 +2100,10 @@ static void __journal_abort_soft (journal_t *journal, int errno)
__jbd2_journal_abort_hard(journal);
- if (errno) { - jbd2_journal_update_sb_errno(journal); - write_lock(&journal->j_state_lock); - journal->j_flags |= JBD2_REC_ERR; - write_unlock(&journal->j_state_lock); - } + jbd2_journal_update_sb_errno(journal); + write_lock(&journal->j_state_lock); + journal->j_flags |= JBD2_REC_ERR; + write_unlock(&journal->j_state_lock); }
/** @@ -2147,11 +2145,6 @@ static void __journal_abort_soft (journal_t *journal, int errno) * failure to disk. ext3_error, for example, now uses this * functionality. * - * Errors which originate from within the journaling layer will NOT - * supply an errno; a null errno implies that absolutely no further - * writes are done to the journal (unless there are any already in - * progress). - * */
void jbd2_journal_abort(journal_t *journal, int errno)
From: Masahiro Yamada masahiroy@kernel.org
[ Upstream commit c8fb7d7e48d11520ad24808cfce7afb7b9c9f798 ]
Running randconfig on arm64 using KCONFIG_SEED=0x40C5E904 (e.g. on v5.5) produces the .config with CONFIG_EFI=y and CONFIG_CPU_BIG_ENDIAN=y, which does not meet the !CONFIG_CPU_BIG_ENDIAN dependency.
This is because the user choice for CONFIG_CPU_LITTLE_ENDIAN vs CONFIG_CPU_BIG_ENDIAN is set by randomize_choice_values() after the value of CONFIG_EFI is calculated.
When this happens, the has_changed flag should be set.
Currently, it takes the result from the last iteration. It should accumulate all the results of the loop.
Fixes: 3b9a19e08960 ("kconfig: loop as long as we changed some symbols in randconfig") Reported-by: Vincenzo Frascino vincenzo.frascino@arm.com Signed-off-by: Masahiro Yamada masahiroy@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/kconfig/confdata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 27aac273205ba..fa423fcd1a928 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -1238,7 +1238,7 @@ bool conf_set_all_new_symbols(enum conf_def_mode mode)
sym_calc_value(csym); if (mode == def_random) - has_changed = randomize_choice_values(csym); + has_changed |= randomize_choice_values(csym); else { set_all_choice_values(csym); has_changed = true;
From: Douglas Anderson dianders@chromium.org
[ Upstream commit 908b050114d8fefdddc57ec9fbc213c3690e7f5f ]
When I got my clock parenting slightly wrong I ended up with a crash that looked like this:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... pc : clk_hw_get_rate+0x14/0x44 ... Call trace: clk_hw_get_rate+0x14/0x44 _freq_tbl_determine_rate+0x94/0xfc clk_rcg2_determine_rate+0x2c/0x38 clk_core_determine_round_nolock+0x4c/0x88 clk_core_round_rate_nolock+0x6c/0xa8 clk_core_round_rate_nolock+0x9c/0xa8 clk_core_set_rate_nolock+0x70/0x180 clk_set_rate+0x3c/0x6c of_clk_set_defaults+0x254/0x360 platform_drv_probe+0x28/0xb0 really_probe+0x120/0x2dc driver_probe_device+0x64/0xfc device_driver_attach+0x4c/0x6c __driver_attach+0xac/0xc0 bus_for_each_dev+0x84/0xcc driver_attach+0x2c/0x38 bus_add_driver+0xfc/0x1d0 driver_register+0x64/0xf8 __platform_driver_register+0x4c/0x58 msm_drm_register+0x5c/0x60 ...
It turned out that clk_hw_get_parent_by_index() was returning NULL and we weren't checking. Let's check it so that we don't crash.
Fixes: ac269395cdd8 ("clk: qcom: Convert to clk_hw based provider APIs") Signed-off-by: Douglas Anderson dianders@chromium.org Reviewed-by: Matthias Kaehlcke mka@chromium.org Link: https://lkml.kernel.org/r/20200203103049.v4.1.I7487325fe8e701a68a07d3be8a6a4... Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/qcom/clk-rcg2.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c index 0ae1b0a66eb55..d8601b138dc1e 100644 --- a/drivers/clk/qcom/clk-rcg2.c +++ b/drivers/clk/qcom/clk-rcg2.c @@ -194,6 +194,9 @@ static int _freq_tbl_determine_rate(struct clk_hw *hw,
clk_flags = clk_hw_get_flags(hw); p = clk_hw_get_parent_by_index(hw, index); + if (!p) + return -EINVAL; + if (clk_flags & CLK_SET_RATE_PARENT) { if (f->pre_div) { if (!rate)
From: yu kuai yukuai3@huawei.com
[ Upstream commit bae028e3e521e8cb8caf2cc16a455ce4c55f2332 ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c: In function 'amdgpu_atombios_get_connector_info_from_object_table': drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:376:26: warning: variable 'grph_obj_num' set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:376:13: warning: variable 'grph_obj_id' set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:341:37: warning: variable 'con_obj_type' set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:341:24: warning: variable 'con_obj_num' set but not used [-Wunused-but-set-variable]
They are never used, so can be removed.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Signed-off-by: yu kuai yukuai3@huawei.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c index 26afdffab5a06..ac8885562919d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c @@ -336,17 +336,9 @@ bool amdgpu_atombios_get_connector_info_from_object_table(struct amdgpu_device * path_size += le16_to_cpu(path->usSize);
if (device_support & le16_to_cpu(path->usDeviceTag)) { - uint8_t con_obj_id, con_obj_num, con_obj_type; - - con_obj_id = + uint8_t con_obj_id = (le16_to_cpu(path->usConnObjectId) & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT; - con_obj_num = - (le16_to_cpu(path->usConnObjectId) & ENUM_ID_MASK) - >> ENUM_ID_SHIFT; - con_obj_type = - (le16_to_cpu(path->usConnObjectId) & - OBJECT_TYPE_MASK) >> OBJECT_TYPE_SHIFT;
/* Skip TV/CV support */ if ((le16_to_cpu(path->usDeviceTag) == @@ -371,14 +363,7 @@ bool amdgpu_atombios_get_connector_info_from_object_table(struct amdgpu_device * router.ddc_valid = false; router.cd_valid = false; for (j = 0; j < ((le16_to_cpu(path->usSize) - 8) / 2); j++) { - uint8_t grph_obj_id, grph_obj_num, grph_obj_type; - - grph_obj_id = - (le16_to_cpu(path->usGraphicObjIds[j]) & - OBJECT_ID_MASK) >> OBJECT_ID_SHIFT; - grph_obj_num = - (le16_to_cpu(path->usGraphicObjIds[j]) & - ENUM_ID_MASK) >> ENUM_ID_SHIFT; + uint8_t grph_obj_type= grph_obj_type = (le16_to_cpu(path->usGraphicObjIds[j]) & OBJECT_TYPE_MASK) >> OBJECT_TYPE_SHIFT;
From: Miquel Raynal miquel.raynal@bootlin.com
[ Upstream commit b8a039d37792067c1a380dc710361905724b9b2f ]
RK808 can leverage a couple of GPIOs to tweak the ramp rate during DVS (Dynamic Voltage Scaling). These GPIOs are entirely optional but a dev_warn() appeared when cleaning this driver to use a more up-to-date gpiod API. At least reduce the log level to 'info' as it is totally fine to not populate these GPIO on a hardware design.
This change is trivial but it is worth not polluting the logs during bringup phase by having real warnings and errors sorted out correctly.
Fixes: a13eaf02e2d6 ("regulator: rk808: make better use of the gpiod API") Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Link: https://lore.kernel.org/r/20191203164709.11127-1-miquel.raynal@bootlin.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/regulator/rk808-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c index dfa8d50a5d741..28646e4cf3bae 100644 --- a/drivers/regulator/rk808-regulator.c +++ b/drivers/regulator/rk808-regulator.c @@ -589,7 +589,7 @@ static int rk808_regulator_dt_parse_pdata(struct device *dev, }
if (!pdata->dvs_gpio[i]) { - dev_warn(dev, "there is no dvs%d gpio\n", i); + dev_info(dev, "there is no dvs%d gpio\n", i); continue; }
From: Rasmus Villemoes linux@rasmusvillemoes.dk
[ Upstream commit 148587a59f6b85831695e0497d9dd1af5f0495af ]
Qiang Zhao points out that these offsets get written to 16-bit registers, and there are some QE platforms with more than 64K muram. So it is possible that qe_muram_alloc() gives us an allocation that can't actually be used by the hardware, so detect and reject that.
Reported-by: Qiang Zhao qiang.zhao@nxp.com Reviewed-by: Timur Tabi timur@kernel.org Signed-off-by: Rasmus Villemoes linux@rasmusvillemoes.dk Acked-by: David S. Miller davem@davemloft.net Signed-off-by: Li Yang leoyang.li@nxp.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wan/fsl_ucc_hdlc.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c index af85a1b3135e2..87bf05a81db50 100644 --- a/drivers/net/wan/fsl_ucc_hdlc.c +++ b/drivers/net/wan/fsl_ucc_hdlc.c @@ -209,6 +209,11 @@ static int uhdlc_init(struct ucc_hdlc_private *priv) ret = -ENOMEM; goto free_riptr; } + if (riptr != (u16)riptr || tiptr != (u16)tiptr) { + dev_err(priv->dev, "MURAM allocation out of addressable range\n"); + ret = -ENOMEM; + goto free_tiptr; + }
/* Set RIPTR, TIPTR */ iowrite16be(riptr, &priv->ucc_pram->riptr);
From: Navid Emamdoost navid.emamdoost@gmail.com
[ Upstream commit 8c386cc817878588195dde38e919aa6ba9409d58 ]
In the implementation of pci_iov_add_virtfn() the allocated virtfn is leaked if pci_setup_device() fails. The error handling is not calling pci_stop_and_remove_bus_device(). Change the goto label to failed2.
Fixes: 156c55325d30 ("PCI: Check for pci_setup_device() failure in pci_iov_add_virtfn()") Link: https://lore.kernel.org/r/20191125195255.23740-1-navid.emamdoost@gmail.com Signed-off-by: Navid Emamdoost navid.emamdoost@gmail.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/iov.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index 1d32fe2d97aa7..9ec3cb628b0b6 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -181,6 +181,7 @@ int pci_iov_add_virtfn(struct pci_dev *dev, int id, int reset) failed2: sysfs_remove_link(&dev->dev.kobj, buf); failed1: + pci_stop_and_remove_bus_device(virtfn); pci_dev_put(dev); mutex_lock(&iov->dev->sriov->lock); pci_stop_and_remove_bus_device(virtfn);
From: Mao Wenan maowenan@huawei.com
[ Upstream commit 718eae277e62a26e5862eb72a830b5e0fe37b04a ]
Convert cpu_to_le16(le16_to_cpu(frame->datalen) + len) to use le16_add_cpu(), which is more concise and does the same thing.
Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Mao Wenan maowenan@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nfc/port100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/nfc/port100.c b/drivers/nfc/port100.c index 3cd995de1bbb5..151b220381f95 100644 --- a/drivers/nfc/port100.c +++ b/drivers/nfc/port100.c @@ -573,7 +573,7 @@ static void port100_tx_update_payload_len(void *_frame, int len) { struct port100_frame *frame = _frame;
- frame->datalen = cpu_to_le16(le16_to_cpu(frame->datalen) + len); + le16_add_cpu(&frame->datalen, len); }
static bool port100_rx_frame_is_valid(void *_frame)
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit afb34781620274236bd9fc9246e22f6963ef5262 ]
When building with Clang + -Wtautological-constant-compare, several of the ivtv and cx18 drivers warn along the lines of:
drivers/media/pci/cx18/cx18-driver.c:1005:21: warning: converting the result of '<<' to a boolean always evaluates to true [-Wtautological-constant-compare] cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL, ^ drivers/media/pci/cx18/cx18-cards.h:18:37: note: expanded from macro 'CX18_HW_GPIO_RESET_CTRL' #define CX18_HW_GPIO_RESET_CTRL (1 << 6) ^ 1 warning generated.
This warning happens because the shift operation is implicitly converted to a boolean in v4l2_device_mask_call_all before being negated. This can be solved by just comparing the mask result to 0 explicitly so that there is no boolean conversion. The ultimate goal is to enable -Wtautological-compare globally because there are several subwarnings that would be helpful to have.
For visual consistency and avoidance of these warnings in the future, all of the implicitly boolean conversions in the v4l2_device macros are converted to explicit ones as well.
Link: https://github.com/ClangBuiltLinux/linux/issues/752
Reviewed-by: Ezequiel Garcia ezequiel@collabora.com Reviewed-by: Nick Desaulniers ndesaulniers@google.com Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/media/v4l2-device.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h index 8ffa94009d1a9..76002416cead9 100644 --- a/include/media/v4l2-device.h +++ b/include/media/v4l2-device.h @@ -268,7 +268,7 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd, struct v4l2_subdev *__sd; \ \ __v4l2_device_call_subdevs_p(v4l2_dev, __sd, \ - !(grpid) || __sd->grp_id == (grpid), o, f , \ + (grpid) == 0 || __sd->grp_id == (grpid), o, f , \ ##args); \ } while (0)
@@ -280,7 +280,7 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd, ({ \ struct v4l2_subdev *__sd; \ __v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd, \ - !(grpid) || __sd->grp_id == (grpid), o, f , \ + (grpid) == 0 || __sd->grp_id == (grpid), o, f , \ ##args); \ })
@@ -294,8 +294,8 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd, struct v4l2_subdev *__sd; \ \ __v4l2_device_call_subdevs_p(v4l2_dev, __sd, \ - !(grpmsk) || (__sd->grp_id & (grpmsk)), o, f , \ - ##args); \ + (grpmsk) == 0 || (__sd->grp_id & (grpmsk)), o, \ + f , ##args); \ } while (0)
/* @@ -308,8 +308,8 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd, ({ \ struct v4l2_subdev *__sd; \ __v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd, \ - !(grpmsk) || (__sd->grp_id & (grpmsk)), o, f , \ - ##args); \ + (grpmsk) == 0 || (__sd->grp_id & (grpmsk)), o, \ + f , ##args); \ })
/*
From: Jan Kara jack@suse.cz
[ Upstream commit 4d5c1adaf893b8aa52525d2b81995e949bcb3239 ]
When we fail to allocate string for journal device name we jump to 'error' label which tries to unlock reiserfs write lock which is not held. Jump to 'error_unlocked' instead.
Fixes: f32485be8397 ("reiserfs: delay reiserfs lock until journal initialization") Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/reiserfs/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index bfed2a7000154..677608a89b08d 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -1928,7 +1928,7 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent) if (!sbi->s_jdev) { SWARN(silent, s, "", "Cannot allocate memory for " "journal device name"); - goto error; + goto error_unlocked; } } #ifdef CONFIG_QUOTA
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit df4654bd6e42125d9b85ce3a26eaca2935290b98 ]
Clang warns:
../sound/usb/usx2y/usX2Yhwdep.c:122:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] info->version = USX2Y_DRIVER_VERSION; ^ ../sound/usb/usx2y/usX2Yhwdep.c:120:2: note: previous statement is here if (us428->chip_status & USX2Y_STAT_CHIP_INIT) ^ 1 warning generated.
This warning occurs because there is a space before the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns.
This was introduced before the beginning of git history so no fixes tag.
Link: https://github.com/ClangBuiltLinux/linux/issues/831 Signed-off-by: Nathan Chancellor natechancellor@gmail.com Link: https://lore.kernel.org/r/20191218034257.54535-1-natechancellor@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/usx2y/usX2Yhwdep.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c index 0b34dbc8f3020..7dcb33d3886bc 100644 --- a/sound/usb/usx2y/usX2Yhwdep.c +++ b/sound/usb/usx2y/usX2Yhwdep.c @@ -132,7 +132,7 @@ static int snd_usX2Y_hwdep_dsp_status(struct snd_hwdep *hw, info->num_dsps = 2; // 0: Prepad Data, 1: FPGA Code if (us428->chip_status & USX2Y_STAT_CHIP_INIT) info->chip_ready = 1; - info->version = USX2Y_DRIVER_VERSION; + info->version = USX2Y_DRIVER_VERSION; return 0; }
From: Phong Tran tranmanphong@gmail.com
[ Upstream commit 475eec112e4267232d10f4afe2f939a241692b6c ]
correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20
Tested-by: Larry Finger Larry.Finger@lwfinger.net Signed-off-by: Phong Tran tranmanphong@gmail.com Reviewed-by: Kees Cook keescook@chromium.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/broadcom/b43legacy/main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/b43legacy/main.c b/drivers/net/wireless/broadcom/b43legacy/main.c index 83770d2ea0578..9da8bd7927022 100644 --- a/drivers/net/wireless/broadcom/b43legacy/main.c +++ b/drivers/net/wireless/broadcom/b43legacy/main.c @@ -1304,8 +1304,9 @@ static void handle_irq_ucode_debug(struct b43legacy_wldev *dev) }
/* Interrupt handler bottom-half */ -static void b43legacy_interrupt_tasklet(struct b43legacy_wldev *dev) +static void b43legacy_interrupt_tasklet(unsigned long data) { + struct b43legacy_wldev *dev = (struct b43legacy_wldev *)data; u32 reason; u32 dma_reason[ARRAY_SIZE(dev->dma_reason)]; u32 merged_dma_reason = 0; @@ -3775,7 +3776,7 @@ static int b43legacy_one_core_attach(struct ssb_device *dev, b43legacy_set_status(wldev, B43legacy_STAT_UNINIT); wldev->bad_frames_preempt = modparam_bad_frames_preempt; tasklet_init(&wldev->isr_tasklet, - (void (*)(unsigned long))b43legacy_interrupt_tasklet, + b43legacy_interrupt_tasklet, (unsigned long)wldev); if (modparam_pio) wldev->__using_pio = true;
From: Phong Tran tranmanphong@gmail.com
[ Upstream commit ebd77feb27e91bb5fe35a7818b7c13ea7435fb98 ]
correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20
Signed-off-by: Phong Tran tranmanphong@gmail.com Reviewed-by: Kees Cook keescook@chromium.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/ipw2x00/ipw2100.c | 7 ++++--- drivers/net/wireless/intel/ipw2x00/ipw2200.c | 5 +++-- 2 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2100.c b/drivers/net/wireless/intel/ipw2x00/ipw2100.c index bfa542c8d6f1a..86c84b11218db 100644 --- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c @@ -3220,8 +3220,9 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv) } }
-static void ipw2100_irq_tasklet(struct ipw2100_priv *priv) +static void ipw2100_irq_tasklet(unsigned long data) { + struct ipw2100_priv *priv = (struct ipw2100_priv *)data; struct net_device *dev = priv->net_dev; unsigned long flags; u32 inta, tmp; @@ -6029,7 +6030,7 @@ static void ipw2100_rf_kill(struct work_struct *work) spin_unlock_irqrestore(&priv->low_lock, flags); }
-static void ipw2100_irq_tasklet(struct ipw2100_priv *priv); +static void ipw2100_irq_tasklet(unsigned long data);
static const struct net_device_ops ipw2100_netdev_ops = { .ndo_open = ipw2100_open, @@ -6158,7 +6159,7 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev, INIT_DELAYED_WORK(&priv->rf_kill, ipw2100_rf_kill); INIT_DELAYED_WORK(&priv->scan_event, ipw2100_scan_event);
- tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) + tasklet_init(&priv->irq_tasklet, ipw2100_irq_tasklet, (unsigned long)priv);
/* NOTE: We do not start the deferred work for status checks yet */ diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2200.c b/drivers/net/wireless/intel/ipw2x00/ipw2200.c index bfd68612a535d..48edb2b6eb7d5 100644 --- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c @@ -1968,8 +1968,9 @@ static void notify_wx_assoc_event(struct ipw_priv *priv) wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL); }
-static void ipw_irq_tasklet(struct ipw_priv *priv) +static void ipw_irq_tasklet(unsigned long data) { + struct ipw_priv *priv = (struct ipw_priv *)data; u32 inta, inta_mask, handled = 0; unsigned long flags; int rc = 0; @@ -10705,7 +10706,7 @@ static int ipw_setup_deferred_work(struct ipw_priv *priv) INIT_WORK(&priv->qos_activate, ipw_bg_qos_activate); #endif /* CONFIG_IPW2200_QOS */
- tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) + tasklet_init(&priv->irq_tasklet, ipw_irq_tasklet, (unsigned long)priv);
return ret;
From: Phong Tran tranmanphong@gmail.com
[ Upstream commit da5e57e8a6a3e69dac2937ba63fa86355628fbb2 ]
correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20
Signed-off-by: Phong Tran tranmanphong@gmail.com Reviewed-by: Kees Cook keescook@chromium.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlegacy/3945-mac.c | 5 +++-- drivers/net/wireless/intel/iwlegacy/4965-mac.c | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlegacy/3945-mac.c b/drivers/net/wireless/intel/iwlegacy/3945-mac.c index 466912eb2d874..d853ccbf74cb2 100644 --- a/drivers/net/wireless/intel/iwlegacy/3945-mac.c +++ b/drivers/net/wireless/intel/iwlegacy/3945-mac.c @@ -1399,8 +1399,9 @@ il3945_dump_nic_error_log(struct il_priv *il) }
static void -il3945_irq_tasklet(struct il_priv *il) +il3945_irq_tasklet(unsigned long data) { + struct il_priv *il = (struct il_priv *)data; u32 inta, handled = 0; u32 inta_fh; unsigned long flags; @@ -3432,7 +3433,7 @@ il3945_setup_deferred_work(struct il_priv *il) setup_timer(&il->watchdog, il_bg_watchdog, (unsigned long)il);
tasklet_init(&il->irq_tasklet, - (void (*)(unsigned long))il3945_irq_tasklet, + il3945_irq_tasklet, (unsigned long)il); }
diff --git a/drivers/net/wireless/intel/iwlegacy/4965-mac.c b/drivers/net/wireless/intel/iwlegacy/4965-mac.c index a91d170a614b6..6c2dcd2367136 100644 --- a/drivers/net/wireless/intel/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/intel/iwlegacy/4965-mac.c @@ -4361,8 +4361,9 @@ il4965_synchronize_irq(struct il_priv *il) }
static void -il4965_irq_tasklet(struct il_priv *il) +il4965_irq_tasklet(unsigned long data) { + struct il_priv *il = (struct il_priv *)data; u32 inta, handled = 0; u32 inta_fh; unsigned long flags; @@ -6260,7 +6261,7 @@ il4965_setup_deferred_work(struct il_priv *il) setup_timer(&il->watchdog, il_bg_watchdog, (unsigned long)il);
tasklet_init(&il->irq_tasklet, - (void (*)(unsigned long))il4965_irq_tasklet, + il4965_irq_tasklet, (unsigned long)il); }
From: Phong Tran tranmanphong@gmail.com
[ Upstream commit cb775c88da5d48a85d99d95219f637b6fad2e0e9 ]
correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20
Signed-off-by: Phong Tran tranmanphong@gmail.com Reviewed-by: Kees Cook keescook@chromium.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/realtek/rtlwifi/pci.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c b/drivers/net/wireless/realtek/rtlwifi/pci.c index e15b462d096bf..21b7cb845bf40 100644 --- a/drivers/net/wireless/realtek/rtlwifi/pci.c +++ b/drivers/net/wireless/realtek/rtlwifi/pci.c @@ -1095,13 +1095,15 @@ done: return ret; }
-static void _rtl_pci_irq_tasklet(struct ieee80211_hw *hw) +static void _rtl_pci_irq_tasklet(unsigned long data) { + struct ieee80211_hw *hw = (struct ieee80211_hw *)data; _rtl_pci_tx_chk_waitq(hw); }
-static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw) +static void _rtl_pci_prepare_bcn_tasklet(unsigned long data) { + struct ieee80211_hw *hw = (struct ieee80211_hw *)data; struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); @@ -1223,10 +1225,10 @@ static void _rtl_pci_init_struct(struct ieee80211_hw *hw,
/*task */ tasklet_init(&rtlpriv->works.irq_tasklet, - (void (*)(unsigned long))_rtl_pci_irq_tasklet, + _rtl_pci_irq_tasklet, (unsigned long)hw); tasklet_init(&rtlpriv->works.irq_prepare_bcn_tasklet, - (void (*)(unsigned long))_rtl_pci_prepare_bcn_tasklet, + _rtl_pci_prepare_bcn_tasklet, (unsigned long)hw); INIT_WORK(&rtlpriv->works.lps_change_work, rtl_lps_change_work_callback);
From: Aditya Pakki pakki001@umn.edu
[ Upstream commit c705f9fc6a1736dcf6ec01f8206707c108dca824 ]
In ezusb_init, if upriv is NULL, the code crashes. However, the caller in ezusb_probe can handle the error and print the failure message. The patch replaces the BUG_ON call to error return.
Signed-off-by: Aditya Pakki pakki001@umn.edu Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intersil/orinoco/orinoco_usb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c index 8244d82629511..4e91c74fcfad9 100644 --- a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c +++ b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c @@ -1351,7 +1351,8 @@ static int ezusb_init(struct hermes *hw) int retval;
BUG_ON(in_interrupt()); - BUG_ON(!upriv); + if (!upriv) + return -EINVAL;
upriv->reply_count = 0; /* Write the MAGIC number on the simulated registers to keep
From: Erik Kaneda erik.kaneda@intel.com
[ Upstream commit 5ddbd77181dfca61b16d2e2222382ea65637f1b9 ]
ACPICA commit 29cc8dbc5463a93625bed87d7550a8bed8913bf4
create_buffer_field is a deferred op that is typically processed in load pass 2. However, disassembly of control method contents walk the parse tree with ACPI_PARSE_LOAD_PASS1 and AML_CREATE operators are processed in a later walk. This is a problem when there is a control method that has the same name as the AML_CREATE object. In this case, any use of the name segment will be detected as a method call rather than a reference to a buffer field. If this is detected as a method call, it can result in a mal-formed parse tree if the control methods have parameters.
This change in processing AML_CREATE ops earlier solves this issue by inserting the named object in the ACPI namespace so that references to this name would be detected as a name string rather than a method call.
Link: https://github.com/acpica/acpica/commit/29cc8dbc Reported-by: Elia Geretto elia.f.geretto@gmail.com Tested-by: Elia Geretto elia.f.geretto@gmail.com Signed-off-by: Bob Moore robert.moore@intel.com Signed-off-by: Erik Kaneda erik.kaneda@intel.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/acpica/dsfield.c | 2 +- drivers/acpi/acpica/dswload.c | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/acpica/dsfield.c b/drivers/acpi/acpica/dsfield.c index 6a4b603d0e834..10bbf6ca082ab 100644 --- a/drivers/acpi/acpica/dsfield.c +++ b/drivers/acpi/acpica/dsfield.c @@ -272,7 +272,7 @@ cleanup: * FUNCTION: acpi_ds_get_field_names * * PARAMETERS: info - create_field info structure - * ` walk_state - Current method state + * walk_state - Current method state * arg - First parser arg for the field name list * * RETURN: Status diff --git a/drivers/acpi/acpica/dswload.c b/drivers/acpi/acpica/dswload.c index fd34040d4f44a..9c41d2153d0f2 100644 --- a/drivers/acpi/acpica/dswload.c +++ b/drivers/acpi/acpica/dswload.c @@ -440,6 +440,27 @@ acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state) ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, walk_state));
+ /* + * Disassembler: handle create field operators here. + * + * create_buffer_field is a deferred op that is typically processed in load + * pass 2. However, disassembly of control method contents walk the parse + * tree with ACPI_PARSE_LOAD_PASS1 and AML_CREATE operators are processed + * in a later walk. This is a problem when there is a control method that + * has the same name as the AML_CREATE object. In this case, any use of the + * name segment will be detected as a method call rather than a reference + * to a buffer field. + * + * This earlier creation during disassembly solves this issue by inserting + * the named object in the ACPI namespace so that references to this name + * would be a name string rather than a method call. + */ + if ((walk_state->parse_flags & ACPI_PARSE_DISASSEMBLE) && + (walk_state->op_info->flags & AML_CREATE)) { + status = acpi_ds_create_buffer_field(op, walk_state); + return_ACPI_STATUS(status); + } + /* We are only interested in opcodes that have an associated name */
if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit 4dbc96ad65c45cdd4e895ed7ae4c151b780790c5 ]
Clang warns:
../drivers/scsi/aic7xxx/aic7xxx_core.c:2317:5: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if ((syncrate->sxfr_u2 & ST_SXFR) != 0) ^ ../drivers/scsi/aic7xxx/aic7xxx_core.c:2310:4: note: previous statement is here if (syncrate == &ahc_syncrates[maxsync]) ^ 1 warning generated.
This warning occurs because there is a space amongst the tabs on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns.
This has been a problem since the beginning of git history hence no fixes tag.
Link: https://github.com/ClangBuiltLinux/linux/issues/817 Link: https://lore.kernel.org/r/20191218014220.52746-1-natechancellor@gmail.com Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/aic7xxx/aic7xxx_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c index 64ab9eaec428c..def3208dd2905 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_core.c +++ b/drivers/scsi/aic7xxx/aic7xxx_core.c @@ -2321,7 +2321,7 @@ ahc_find_syncrate(struct ahc_softc *ahc, u_int *period, * At some speeds, we only support * ST transfers. */ - if ((syncrate->sxfr_u2 & ST_SXFR) != 0) + if ((syncrate->sxfr_u2 & ST_SXFR) != 0) *ppr_options &= ~MSG_EXT_PPR_DT_REQ; break; }
From: Bibby Hsieh bibby.hsieh@mediatek.com
[ Upstream commit 411f5c1eacfebb1f6e40b653d29447cdfe7282aa ]
The driver currently handles vblank events only when updating planes on an already enabled CRTC. The atomic update API however allows requesting an event when enabling or disabling a CRTC. This currently leads to event objects being leaked in the kernel and to events not being sent out. Fix it.
Signed-off-by: Bibby Hsieh bibby.hsieh@mediatek.com Signed-off-by: CK Hu ck.hu@mediatek.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c index 01a21dd835b57..1ed60da76a0ce 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c @@ -306,6 +306,7 @@ err_pm_runtime_put: static void mtk_crtc_ddp_hw_fini(struct mtk_drm_crtc *mtk_crtc) { struct drm_device *drm = mtk_crtc->base.dev; + struct drm_crtc *crtc = &mtk_crtc->base; int i;
DRM_DEBUG_DRIVER("%s\n", __func__); @@ -327,6 +328,13 @@ static void mtk_crtc_ddp_hw_fini(struct mtk_drm_crtc *mtk_crtc) mtk_disp_mutex_unprepare(mtk_crtc->mutex);
pm_runtime_put(drm->dev); + + if (crtc->state->event && !crtc->state->active) { + spin_lock_irq(&crtc->dev->event_lock); + drm_crtc_send_vblank_event(crtc, crtc->state->event); + crtc->state->event = NULL; + spin_unlock_irq(&crtc->dev->event_lock); + } }
static void mtk_drm_crtc_enable(struct drm_crtc *crtc)
From: Geert Uytterhoeven geert+renesas@glider.be
[ Upstream commit 8443ffd1bbd5be74e9b12db234746d12e8ea93e2 ]
Add a device node for the global timer, which is part of the Cortex-A9 MPCore.
The global timer can serve as an accurate (4 ns) clock source for scheduling and delay loops.
Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://lore.kernel.org/r/20191211135222.26770-4-geert+renesas@glider.be Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/r8a7779.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index b9bbcce69dfbd..6c6d4893e92d4 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -67,6 +67,14 @@ <0xf0000100 0x100>; };
+ timer@f0000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0xf0000200 0x100>; + interrupts = <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&cpg_clocks R8A7779_CLK_ZS>; + }; + timer@f0000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xf0000600 0x20>;
From: Valdis Klētnieks valdis.kletnieks@vt.edu
[ Upstream commit bff47c2302cc249bcd550b17067f8dddbd4b6f77 ]
When building with C=1, sparse issues a warning:
CHECK arch/x86/entry/vdso/vdso32-setup.c arch/x86/entry/vdso/vdso32-setup.c:28:28: warning: symbol 'vdso32_enabled' was not declared. Should it be static?
Provide the missing header file.
Signed-off-by: Valdis Kletnieks valdis.kletnieks@vt.edu Signed-off-by: Borislav Petkov bp@suse.de Cc: "H. Peter Anvin" hpa@zytor.com Cc: Andy Lutomirski luto@kernel.org Cc: Ingo Molnar mingo@redhat.com Cc: Thomas Gleixner tglx@linutronix.de Cc: x86-ml x86@kernel.org Link: https://lkml.kernel.org/r/36224.1575599767@turing-police Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/entry/vdso/vdso32-setup.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/x86/entry/vdso/vdso32-setup.c b/arch/x86/entry/vdso/vdso32-setup.c index 3f9d1a83891ad..50c1f77cab150 100644 --- a/arch/x86/entry/vdso/vdso32-setup.c +++ b/arch/x86/entry/vdso/vdso32-setup.c @@ -10,6 +10,7 @@ #include <linux/smp.h> #include <linux/kernel.h> #include <linux/mm_types.h> +#include <linux/elf.h>
#include <asm/processor.h> #include <asm/vdso.h>
From: Chanwoo Choi cw00.choi@samsung.com
[ Upstream commit eff5d31f7407fa9d31fb840106f1593399457298 ]
To build test, add COMPILE_TEST depedency to both ARM_RK3399_DMC_DEVFREQ and DEVFREQ_EVENT_ROCKCHIP_DFI configuration. And ARM_RK3399_DMC_DEVFREQ used the SMCCC interface so that add HAVE_ARM_SMCCC dependency to prevent the build break.
Reported-by: kbuild test robot lkp@intel.com Signed-off-by: Chanwoo Choi cw00.choi@samsung.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/devfreq/Kconfig | 3 ++- drivers/devfreq/event/Kconfig | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig index 41254e702f1e9..2ce7cc94d78b1 100644 --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig @@ -102,7 +102,8 @@ config ARM_TEGRA_DEVFREQ
config ARM_RK3399_DMC_DEVFREQ tristate "ARM RK3399 DMC DEVFREQ Driver" - depends on ARCH_ROCKCHIP + depends on (ARCH_ROCKCHIP && HAVE_ARM_SMCCC) || \ + (COMPILE_TEST && HAVE_ARM_SMCCC) select DEVFREQ_EVENT_ROCKCHIP_DFI select DEVFREQ_GOV_SIMPLE_ONDEMAND select PM_DEVFREQ_EVENT diff --git a/drivers/devfreq/event/Kconfig b/drivers/devfreq/event/Kconfig index cd949800eed96..8851bc4e8e3e1 100644 --- a/drivers/devfreq/event/Kconfig +++ b/drivers/devfreq/event/Kconfig @@ -33,7 +33,7 @@ config DEVFREQ_EVENT_EXYNOS_PPMU
config DEVFREQ_EVENT_ROCKCHIP_DFI tristate "ROCKCHIP DFI DEVFREQ event Driver" - depends on ARCH_ROCKCHIP + depends on ARCH_ROCKCHIP || COMPILE_TEST help This add the devfreq-event driver for Rockchip SoC. It provides DFI (DDR Monitor Module) driver to count ddr load.
From: Geert Uytterhoeven geert+renesas@glider.be
[ Upstream commit 02aeb2f21530c98fc3ca51028eda742a3fafbd9f ]
pinmux_func_gpios[] contains a hole due to the missing function GPIO definition for the "CTX0&CTX1" signal, which is the logical "AND" of the first two CAN outputs.
A closer look reveals other issues: - Some functionality is available on alternative pins, but the PINMUX_DATA() entries is using the wrong marks, - Several configurations are missing.
Fix this by: - Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK, resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the corresponding enum IDs, - Adding all missing enum IDs and marks, - Use the right (*_PJ2x) variants for alternative pins, - Adding all missing configurations to pinmux_data[], - Adding all missing function GPIO definitions to pinmux_func_gpios[].
See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00: [1] Table 1.4 List of Pins [2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel (32 Mailboxes × 1 Channel), [3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as One Channel (96 Mailboxes × 1 Channel), [4] Table 48.3 Multiplexed Pins (Port B), [5] Table 48.4 Multiplexed Pins (Port C), [6] Table 48.10 Multiplexed Pins (Port J), [7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5).
Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://lore.kernel.org/r/20191218194812.12741-5-geert+renesas@glider.be Signed-off-by: Sasha Levin sashal@kernel.org --- arch/sh/include/cpu-sh2a/cpu/sh7269.h | 11 ++++++-- drivers/pinctrl/sh-pfc/pfc-sh7269.c | 39 ++++++++++++++++++--------- 2 files changed, 36 insertions(+), 14 deletions(-)
diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h index 2a0ca8780f0d8..e4caddd443daf 100644 --- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h +++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h @@ -79,8 +79,15 @@ enum { GPIO_FN_WDTOVF,
/* CAN */ - GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1, - GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1, GPIO_FN_CRX0_CRX1_CRX2, + GPIO_FN_CTX2, GPIO_FN_CRX2, + GPIO_FN_CTX1, GPIO_FN_CRX1, + GPIO_FN_CTX0, GPIO_FN_CRX0, + GPIO_FN_CTX0_CTX1, GPIO_FN_CRX0_CRX1, + GPIO_FN_CTX0_CTX1_CTX2, GPIO_FN_CRX0_CRX1_CRX2, + GPIO_FN_CTX2_PJ21, GPIO_FN_CRX2_PJ20, + GPIO_FN_CTX1_PJ23, GPIO_FN_CRX1_PJ22, + GPIO_FN_CTX0_CTX1_PJ23, GPIO_FN_CRX0_CRX1_PJ22, + GPIO_FN_CTX0_CTX1_CTX2_PJ21, GPIO_FN_CRX0_CRX1_CRX2_PJ20,
/* DMAC */ GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0, diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7269.c b/drivers/pinctrl/sh-pfc/pfc-sh7269.c index cfdb4fc177c3e..3df0c0d139d08 100644 --- a/drivers/pinctrl/sh-pfc/pfc-sh7269.c +++ b/drivers/pinctrl/sh-pfc/pfc-sh7269.c @@ -740,13 +740,12 @@ enum { CRX0_MARK, CTX0_MARK, CRX1_MARK, CTX1_MARK, CRX2_MARK, CTX2_MARK, - CRX0_CRX1_MARK, - CRX0_CRX1_CRX2_MARK, - CTX0CTX1CTX2_MARK, + CRX0_CRX1_MARK, CTX0_CTX1_MARK, + CRX0_CRX1_CRX2_MARK, CTX0_CTX1_CTX2_MARK, CRX1_PJ22_MARK, CTX1_PJ23_MARK, CRX2_PJ20_MARK, CTX2_PJ21_MARK, - CRX0CRX1_PJ22_MARK, - CRX0CRX1CRX2_PJ20_MARK, + CRX0_CRX1_PJ22_MARK, CTX0_CTX1_PJ23_MARK, + CRX0_CRX1_CRX2_PJ20_MARK, CTX0_CTX1_CTX2_PJ21_MARK,
/* VDC */ DV_CLK_MARK, @@ -824,6 +823,7 @@ static const u16 pinmux_data[] = { PINMUX_DATA(CS3_MARK, PC8MD_001), PINMUX_DATA(TXD7_MARK, PC8MD_010), PINMUX_DATA(CTX1_MARK, PC8MD_011), + PINMUX_DATA(CTX0_CTX1_MARK, PC8MD_100),
PINMUX_DATA(PC7_DATA, PC7MD_000), PINMUX_DATA(CKE_MARK, PC7MD_001), @@ -836,11 +836,12 @@ static const u16 pinmux_data[] = { PINMUX_DATA(CAS_MARK, PC6MD_001), PINMUX_DATA(SCK7_MARK, PC6MD_010), PINMUX_DATA(CTX0_MARK, PC6MD_011), + PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC6MD_100),
PINMUX_DATA(PC5_DATA, PC5MD_000), PINMUX_DATA(RAS_MARK, PC5MD_001), PINMUX_DATA(CRX0_MARK, PC5MD_011), - PINMUX_DATA(CTX0CTX1CTX2_MARK, PC5MD_100), + PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC5MD_100), PINMUX_DATA(IRQ0_PC_MARK, PC5MD_101),
PINMUX_DATA(PC4_DATA, PC4MD_00), @@ -1292,30 +1293,32 @@ static const u16 pinmux_data[] = { PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010), PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011), PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100), - PINMUX_DATA(CTX1_MARK, PJ23MD_101), + PINMUX_DATA(CTX1_PJ23_MARK, PJ23MD_101), + PINMUX_DATA(CTX0_CTX1_PJ23_MARK, PJ23MD_110),
PINMUX_DATA(PJ22_DATA, PJ22MD_000), PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001), PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010), PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011), PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100), - PINMUX_DATA(CRX1_MARK, PJ22MD_101), - PINMUX_DATA(CRX0_CRX1_MARK, PJ22MD_110), + PINMUX_DATA(CRX1_PJ22_MARK, PJ22MD_101), + PINMUX_DATA(CRX0_CRX1_PJ22_MARK, PJ22MD_110),
PINMUX_DATA(PJ21_DATA, PJ21MD_000), PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001), PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010), PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011), PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100), - PINMUX_DATA(CTX2_MARK, PJ21MD_101), + PINMUX_DATA(CTX2_PJ21_MARK, PJ21MD_101), + PINMUX_DATA(CTX0_CTX1_CTX2_PJ21_MARK, PJ21MD_110),
PINMUX_DATA(PJ20_DATA, PJ20MD_000), PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001), PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010), PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011), PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100), - PINMUX_DATA(CRX2_MARK, PJ20MD_101), - PINMUX_DATA(CRX0CRX1CRX2_PJ20_MARK, PJ20MD_110), + PINMUX_DATA(CRX2_PJ20_MARK, PJ20MD_101), + PINMUX_DATA(CRX0_CRX1_CRX2_PJ20_MARK, PJ20MD_110),
PINMUX_DATA(PJ19_DATA, PJ19MD_000), PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001), @@ -1666,12 +1669,24 @@ static const struct pinmux_func pinmux_func_gpios[] = { GPIO_FN(WDTOVF),
/* CAN */ + GPIO_FN(CTX2), + GPIO_FN(CRX2), GPIO_FN(CTX1), GPIO_FN(CRX1), GPIO_FN(CTX0), GPIO_FN(CRX0), + GPIO_FN(CTX0_CTX1), GPIO_FN(CRX0_CRX1), + GPIO_FN(CTX0_CTX1_CTX2), GPIO_FN(CRX0_CRX1_CRX2), + GPIO_FN(CTX2_PJ21), + GPIO_FN(CRX2_PJ20), + GPIO_FN(CTX1_PJ23), + GPIO_FN(CRX1_PJ22), + GPIO_FN(CTX0_CTX1_PJ23), + GPIO_FN(CRX0_CRX1_PJ22), + GPIO_FN(CTX0_CTX1_CTX2_PJ21), + GPIO_FN(CRX0_CRX1_CRX2_PJ20),
/* DMAC */ GPIO_FN(TEND0),
From: Jiewei Ke kejiewei.cn@gmail.com
[ Upstream commit 6ca18d8927d468c763571f78c9a7387a69ffa020 ]
The type of mmap_offset should be u64 instead of int to match the type of mminfo.offset. If otherwise, after we create several thousands of CQs, it will run into overflow issues.
Link: https://lore.kernel.org/r/20191227113613.5020-1-kejiewei.cn@gmail.com Signed-off-by: Jiewei Ke kejiewei.cn@gmail.com Reviewed-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/sw/rxe/rxe_verbs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.h b/drivers/infiniband/sw/rxe/rxe_verbs.h index 47003d2a4a46e..dee3853163b60 100644 --- a/drivers/infiniband/sw/rxe/rxe_verbs.h +++ b/drivers/infiniband/sw/rxe/rxe_verbs.h @@ -422,7 +422,7 @@ struct rxe_dev { struct list_head pending_mmaps;
spinlock_t mmap_offset_lock; /* guard mmap_offset */ - int mmap_offset; + u64 mmap_offset;
struct rxe_port port; struct list_head list;
From: Takashi Iwai tiwai@suse.de
[ Upstream commit f1dd4795b1523fbca7ab4344dd5a8bb439cc770d ]
A long-standing compile warning was seen during build test: sound/sh/aica.c: In function 'load_aica_firmware': sound/sh/aica.c:521:25: warning: passing argument 2 of 'spu_memload' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
Fixes: 198de43d758c ("[ALSA] Add ALSA support for the SEGA Dreamcast PCM device") Link: https://lore.kernel.org/r/20200105144823.29547-69-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/sh/aica.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/sh/aica.c b/sound/sh/aica.c index fbbc252795599..2a127feb8e293 100644 --- a/sound/sh/aica.c +++ b/sound/sh/aica.c @@ -117,10 +117,10 @@ static void spu_memset(u32 toi, u32 what, int length) }
/* spu_memload - write to SPU address space */ -static void spu_memload(u32 toi, void *from, int length) +static void spu_memload(u32 toi, const void *from, int length) { unsigned long flags; - u32 *froml = from; + const u32 *froml = from; u32 __iomem *to = (u32 __iomem *) (SPU_MEMORY_BASE + toi); int i; u32 val;
From: Andrey Zhizhikin andrey.z@gmail.com
[ Upstream commit 6794200fa3c9c3e6759dae099145f23e4310f4f7 ]
GCC9 introduced string hardening mechanisms, which exhibits the error during fs api compilation:
error: '__builtin_strncpy' specified bound 4096 equals destination size [-Werror=stringop-truncation]
This comes when the length of copy passed to strncpy is is equal to destination size, which could potentially lead to buffer overflow.
There is a need to mitigate this potential issue by limiting the size of destination by 1 and explicitly terminate the destination with NULL.
Signed-off-by: Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com Reviewed-by: Petr Mladek pmladek@suse.com Acked-by: Jiri Olsa jolsa@kernel.org Cc: Alexei Starovoitov ast@kernel.org Cc: Andrii Nakryiko andriin@fb.com Cc: Daniel Borkmann daniel@iogearbox.net Cc: Kefeng Wang wangkefeng.wang@huawei.com Cc: Martin KaFai Lau kafai@fb.com Cc: Petr Mladek pmladek@suse.com Cc: Sergey Senozhatsky sergey.senozhatsky@gmail.com Cc: Song Liu songliubraving@fb.com Cc: Yonghong Song yhs@fb.com Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20191211080109.18765-1-andrey.zhizhikin@leica-ge... Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/lib/api/fs/fs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/tools/lib/api/fs/fs.c b/tools/lib/api/fs/fs.c index f99f49e4a31e6..21e714cf0126c 100644 --- a/tools/lib/api/fs/fs.c +++ b/tools/lib/api/fs/fs.c @@ -194,6 +194,7 @@ static bool fs__env_override(struct fs *fs) size_t name_len = strlen(fs->name); /* name + "_PATH" + '\0' */ char upper_name[name_len + 5 + 1]; + memcpy(upper_name, fs->name, name_len); mem_toupper(upper_name, name_len); strcpy(&upper_name[name_len], "_PATH"); @@ -203,7 +204,8 @@ static bool fs__env_override(struct fs *fs) return false;
fs->found = true; - strncpy(fs->path, override_path, sizeof(fs->path)); + strncpy(fs->path, override_path, sizeof(fs->path) - 1); + fs->path[sizeof(fs->path) - 1] = '\0'; return true; }
From: Shuah Khan skhan@linuxfoundation.org
[ Upstream commit 585c91f40d201bc564d4e76b83c05b3b5363fe7e ]
Fix unsafe unaligned pointer usage in usbip network interfaces. usbip tool build fails with new gcc -Werror=address-of-packed-member checks.
usbip_network.c: In function ‘usbip_net_pack_usb_device’: usbip_network.c:79:32: error: taking address of packed member of ‘struct usbip_usb_device’ may result in an unaligned pointer value [-Werror=address-of-packed-member] 79 | usbip_net_pack_uint32_t(pack, &udev->busnum);
Fix with minor changes to pass by value instead of by address.
Signed-off-by: Shuah Khan skhan@linuxfoundation.org Link: https://lore.kernel.org/r/20200109012416.2875-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/usb/usbip/src/usbip_network.c | 40 +++++++++++++++++------------ tools/usb/usbip/src/usbip_network.h | 12 +++------ 2 files changed, 27 insertions(+), 25 deletions(-)
diff --git a/tools/usb/usbip/src/usbip_network.c b/tools/usb/usbip/src/usbip_network.c index b4c37e76a6e08..187dfaa67d0a2 100644 --- a/tools/usb/usbip/src/usbip_network.c +++ b/tools/usb/usbip/src/usbip_network.c @@ -62,39 +62,39 @@ void usbip_setup_port_number(char *arg) info("using port %d ("%s")", usbip_port, usbip_port_string); }
-void usbip_net_pack_uint32_t(int pack, uint32_t *num) +uint32_t usbip_net_pack_uint32_t(int pack, uint32_t num) { uint32_t i;
if (pack) - i = htonl(*num); + i = htonl(num); else - i = ntohl(*num); + i = ntohl(num);
- *num = i; + return i; }
-void usbip_net_pack_uint16_t(int pack, uint16_t *num) +uint16_t usbip_net_pack_uint16_t(int pack, uint16_t num) { uint16_t i;
if (pack) - i = htons(*num); + i = htons(num); else - i = ntohs(*num); + i = ntohs(num);
- *num = i; + return i; }
void usbip_net_pack_usb_device(int pack, struct usbip_usb_device *udev) { - usbip_net_pack_uint32_t(pack, &udev->busnum); - usbip_net_pack_uint32_t(pack, &udev->devnum); - usbip_net_pack_uint32_t(pack, &udev->speed); + udev->busnum = usbip_net_pack_uint32_t(pack, udev->busnum); + udev->devnum = usbip_net_pack_uint32_t(pack, udev->devnum); + udev->speed = usbip_net_pack_uint32_t(pack, udev->speed);
- usbip_net_pack_uint16_t(pack, &udev->idVendor); - usbip_net_pack_uint16_t(pack, &udev->idProduct); - usbip_net_pack_uint16_t(pack, &udev->bcdDevice); + udev->idVendor = usbip_net_pack_uint16_t(pack, udev->idVendor); + udev->idProduct = usbip_net_pack_uint16_t(pack, udev->idProduct); + udev->bcdDevice = usbip_net_pack_uint16_t(pack, udev->bcdDevice); }
void usbip_net_pack_usb_interface(int pack __attribute__((unused)), @@ -141,6 +141,14 @@ ssize_t usbip_net_send(int sockfd, void *buff, size_t bufflen) return usbip_net_xmit(sockfd, buff, bufflen, 1); }
+static inline void usbip_net_pack_op_common(int pack, + struct op_common *op_common) +{ + op_common->version = usbip_net_pack_uint16_t(pack, op_common->version); + op_common->code = usbip_net_pack_uint16_t(pack, op_common->code); + op_common->status = usbip_net_pack_uint32_t(pack, op_common->status); +} + int usbip_net_send_op_common(int sockfd, uint32_t code, uint32_t status) { struct op_common op_common; @@ -152,7 +160,7 @@ int usbip_net_send_op_common(int sockfd, uint32_t code, uint32_t status) op_common.code = code; op_common.status = status;
- PACK_OP_COMMON(1, &op_common); + usbip_net_pack_op_common(1, &op_common);
rc = usbip_net_send(sockfd, &op_common, sizeof(op_common)); if (rc < 0) { @@ -176,7 +184,7 @@ int usbip_net_recv_op_common(int sockfd, uint16_t *code) goto err; }
- PACK_OP_COMMON(0, &op_common); + usbip_net_pack_op_common(0, &op_common);
if (op_common.version != USBIP_VERSION) { dbg("version mismatch: %d %d", op_common.version, diff --git a/tools/usb/usbip/src/usbip_network.h b/tools/usb/usbip/src/usbip_network.h index c1e875cf1078c..573fa839b66b7 100644 --- a/tools/usb/usbip/src/usbip_network.h +++ b/tools/usb/usbip/src/usbip_network.h @@ -33,12 +33,6 @@ struct op_common {
} __attribute__((packed));
-#define PACK_OP_COMMON(pack, op_common) do {\ - usbip_net_pack_uint16_t(pack, &(op_common)->version);\ - usbip_net_pack_uint16_t(pack, &(op_common)->code);\ - usbip_net_pack_uint32_t(pack, &(op_common)->status);\ -} while (0) - /* ---------------------------------------------------------------------- */ /* Dummy Code */ #define OP_UNSPEC 0x00 @@ -164,11 +158,11 @@ struct op_devlist_reply_extra { } while (0)
#define PACK_OP_DEVLIST_REPLY(pack, reply) do {\ - usbip_net_pack_uint32_t(pack, &(reply)->ndev);\ + (reply)->ndev = usbip_net_pack_uint32_t(pack, (reply)->ndev);\ } while (0)
-void usbip_net_pack_uint32_t(int pack, uint32_t *num); -void usbip_net_pack_uint16_t(int pack, uint16_t *num); +uint32_t usbip_net_pack_uint32_t(int pack, uint32_t num); +uint16_t usbip_net_pack_uint16_t(int pack, uint16_t num); void usbip_net_pack_usb_device(int pack, struct usbip_usb_device *udev); void usbip_net_pack_usb_interface(int pack, struct usbip_usb_interface *uinf);
From: Jan Kara jack@suse.cz
[ Upstream commit a4a8b99ec819ca60b49dc582a4287ef03411f117 ]
Free space on filesystems with metadata or virtual partition maps currently gets misreported. This is because these partitions are just remapped onto underlying real partitions from which keep track of free blocks. Take this remapping into account when counting free blocks as well.
Reviewed-by: Pali Rohár pali.rohar@gmail.com Reported-by: Pali Rohár pali.rohar@gmail.com Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/udf/super.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/fs/udf/super.c b/fs/udf/super.c index 03369a89600e0..4abdba453885e 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -2460,17 +2460,29 @@ static unsigned int udf_count_free_table(struct super_block *sb, static unsigned int udf_count_free(struct super_block *sb) { unsigned int accum = 0; - struct udf_sb_info *sbi; + struct udf_sb_info *sbi = UDF_SB(sb); struct udf_part_map *map; + unsigned int part = sbi->s_partition; + int ptype = sbi->s_partmaps[part].s_partition_type; + + if (ptype == UDF_METADATA_MAP25) { + part = sbi->s_partmaps[part].s_type_specific.s_metadata. + s_phys_partition_ref; + } else if (ptype == UDF_VIRTUAL_MAP15 || ptype == UDF_VIRTUAL_MAP20) { + /* + * Filesystems with VAT are append-only and we cannot write to + * them. Let's just report 0 here. + */ + return 0; + }
- sbi = UDF_SB(sb); if (sbi->s_lvid_bh) { struct logicalVolIntegrityDesc *lvid = (struct logicalVolIntegrityDesc *) sbi->s_lvid_bh->b_data; - if (le32_to_cpu(lvid->numOfPartitions) > sbi->s_partition) { + if (le32_to_cpu(lvid->numOfPartitions) > part) { accum = le32_to_cpu( - lvid->freeSpaceTable[sbi->s_partition]); + lvid->freeSpaceTable[part]); if (accum == 0xFFFFFFFF) accum = 0; } @@ -2479,7 +2491,7 @@ static unsigned int udf_count_free(struct super_block *sb) if (accum) return accum;
- map = &sbi->s_partmaps[sbi->s_partition]; + map = &sbi->s_partmaps[part]; if (map->s_partition_flags & UDF_PART_FLAG_UNALLOC_BITMAP) { accum += udf_count_free_bitmap(sb, map->s_uspace.s_bitmap);
From: Dmitry Osipenko digetx@gmail.com
[ Upstream commit 2d9ea1934f8ef0dfb862d103389562cc28b4fc03 ]
Trying to read out Chip ID before APBMISC registers are mapped won't succeed, in a result Tegra124 gets a wrong address for the HW straps register if machine uses an old outdated device tree.
Fixes: 297c4f3dcbff ("soc/tegra: fuse: Restrict legacy code to 32-bit ARM") Signed-off-by: Dmitry Osipenko digetx@gmail.com Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/tegra/fuse/tegra-apbmisc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/tegra/fuse/tegra-apbmisc.c b/drivers/soc/tegra/fuse/tegra-apbmisc.c index 5b18f6ffa45c7..cd61c883c19f5 100644 --- a/drivers/soc/tegra/fuse/tegra-apbmisc.c +++ b/drivers/soc/tegra/fuse/tegra-apbmisc.c @@ -134,7 +134,7 @@ void __init tegra_init_apbmisc(void) apbmisc.flags = IORESOURCE_MEM;
/* strapping options */ - if (tegra_get_chip_id() == TEGRA124) { + if (of_machine_is_compatible("nvidia,tegra124")) { straps.start = 0x7000e864; straps.end = 0x7000e867; } else {
From: Paul E. McKenney paulmck@kernel.org
[ Upstream commit 860c8802ace14c646864795e057349c9fb2d60ad ]
Eric Dumazet supplied a KCSAN report of a bug that forces use of hlist_unhashed_lockless() from sk_unhashed():
------------------------------------------------------------------------
BUG: KCSAN: data-race in inet_unhash / inet_unhash
write to 0xffff8880a69a0170 of 8 bytes by interrupt on cpu 1: __hlist_nulls_del include/linux/list_nulls.h:88 [inline] hlist_nulls_del_init_rcu include/linux/rculist_nulls.h:36 [inline] __sk_nulls_del_node_init_rcu include/net/sock.h:676 [inline] inet_unhash+0x38f/0x4a0 net/ipv4/inet_hashtables.c:612 tcp_set_state+0xfa/0x3e0 net/ipv4/tcp.c:2249 tcp_done+0x93/0x1e0 net/ipv4/tcp.c:3854 tcp_write_err+0x7e/0xc0 net/ipv4/tcp_timer.c:56 tcp_retransmit_timer+0x9b8/0x16d0 net/ipv4/tcp_timer.c:479 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:599 tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:619 call_timer_fn+0x5f/0x2f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0xc0c/0xcd0 kernel/time/timer.c:1786 __do_softirq+0x115/0x33f kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0xbb/0xe0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71 arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x1af/0x280 kernel/sched/idle.c:263 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355 start_secondary+0x208/0x260 arch/x86/kernel/smpboot.c:264 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241
read to 0xffff8880a69a0170 of 8 bytes by interrupt on cpu 0: sk_unhashed include/net/sock.h:607 [inline] inet_unhash+0x3d/0x4a0 net/ipv4/inet_hashtables.c:592 tcp_set_state+0xfa/0x3e0 net/ipv4/tcp.c:2249 tcp_done+0x93/0x1e0 net/ipv4/tcp.c:3854 tcp_write_err+0x7e/0xc0 net/ipv4/tcp_timer.c:56 tcp_retransmit_timer+0x9b8/0x16d0 net/ipv4/tcp_timer.c:479 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:599 tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:619 call_timer_fn+0x5f/0x2f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0xc0c/0xcd0 kernel/time/timer.c:1786 __do_softirq+0x115/0x33f kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0xbb/0xe0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71 arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x1af/0x280 kernel/sched/idle.c:263 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355 rest_init+0xec/0xf6 init/main.c:452 arch_call_rest_init+0x17/0x37 start_kernel+0x838/0x85e init/main.c:786 x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490 x86_64_start_kernel+0x72/0x76 arch/x86/kernel/head64.c:471 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241
Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc6+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
------------------------------------------------------------------------
This commit therefore replaces C-language assignments with WRITE_ONCE() in include/linux/list_nulls.h and include/linux/rculist_nulls.h.
Reported-by: Eric Dumazet edumazet@google.com # For KCSAN Signed-off-by: Paul E. McKenney paulmck@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/list_nulls.h | 8 ++++---- include/linux/rculist_nulls.h | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/include/linux/list_nulls.h b/include/linux/list_nulls.h index 87ff4f58a2f01..9e20bf7f46a20 100644 --- a/include/linux/list_nulls.h +++ b/include/linux/list_nulls.h @@ -71,10 +71,10 @@ static inline void hlist_nulls_add_head(struct hlist_nulls_node *n, struct hlist_nulls_node *first = h->first;
n->next = first; - n->pprev = &h->first; + WRITE_ONCE(n->pprev, &h->first); h->first = n; if (!is_a_nulls(first)) - first->pprev = &n->next; + WRITE_ONCE(first->pprev, &n->next); }
static inline void __hlist_nulls_del(struct hlist_nulls_node *n) @@ -84,13 +84,13 @@ static inline void __hlist_nulls_del(struct hlist_nulls_node *n)
WRITE_ONCE(*pprev, next); if (!is_a_nulls(next)) - next->pprev = pprev; + WRITE_ONCE(next->pprev, pprev); }
static inline void hlist_nulls_del(struct hlist_nulls_node *n) { __hlist_nulls_del(n); - n->pprev = LIST_POISON2; + WRITE_ONCE(n->pprev, LIST_POISON2); }
/** diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h index 106f4e0d7bd39..4d71e3687d1ed 100644 --- a/include/linux/rculist_nulls.h +++ b/include/linux/rculist_nulls.h @@ -33,7 +33,7 @@ static inline void hlist_nulls_del_init_rcu(struct hlist_nulls_node *n) { if (!hlist_nulls_unhashed(n)) { __hlist_nulls_del(n); - n->pprev = NULL; + WRITE_ONCE(n->pprev, NULL); } }
@@ -65,7 +65,7 @@ static inline void hlist_nulls_del_init_rcu(struct hlist_nulls_node *n) static inline void hlist_nulls_del_rcu(struct hlist_nulls_node *n) { __hlist_nulls_del(n); - n->pprev = LIST_POISON2; + WRITE_ONCE(n->pprev, LIST_POISON2); }
/** @@ -93,10 +93,10 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n, struct hlist_nulls_node *first = h->first;
n->next = first; - n->pprev = &h->first; + WRITE_ONCE(n->pprev, &h->first); rcu_assign_pointer(hlist_nulls_first_rcu(h), n); if (!is_a_nulls(first)) - first->pprev = &n->next; + WRITE_ONCE(first->pprev, &n->next); }
/**
From: Philipp Zabel p.zabel@pengutronix.de
[ Upstream commit e112324cc0422c046f1cf54c56f333d34fa20885 ]
The EP0700MLP1 returns bogus data on the first register read access (reading the threshold parameter from register 0x00):
edt_ft5x06 2-0038: crc error: 0xfc expected, got 0x40
It ignores writes until then. This patch adds a dummy read after which the number of sensors and parameter read/writes work correctly.
Signed-off-by: Philipp Zabel p.zabel@pengutronix.de Signed-off-by: Marco Felsch m.felsch@pengutronix.de Tested-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/touchscreen/edt-ft5x06.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 28466e358fee1..22c8d2070faac 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -887,6 +887,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, { const struct edt_i2c_chip_data *chip_data; struct edt_ft5x06_ts_data *tsdata; + u8 buf[2] = { 0xfc, 0x00 }; struct input_dev *input; unsigned long irq_flags; int error; @@ -956,6 +957,12 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, return error; }
+ /* + * Dummy read access. EP0700MLP1 returns bogus data on the first + * register read access and ignores writes. + */ + edt_ft5x06_ts_readwrite(tsdata->client, 2, buf, 2, buf); + edt_ft5x06_ts_set_regs(tsdata); edt_ft5x06_ts_get_defaults(&client->dev, tsdata); edt_ft5x06_ts_get_parameters(tsdata);
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit 504c28c853ec5c626900b914b5833daf0581a344 ]
Change the driver to use portable integer types to avoid warnings during compile testing:
drivers/net/wan/ixp4xx_hss.c:863:21: error: cast to 'u32 *' (aka 'unsigned int *') from smaller integer type 'int' [-Werror,-Wint-to-pointer-cast] memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4); ^ drivers/net/wan/ixp4xx_hss.c:979:12: error: incompatible pointer types passing 'u32 *' (aka 'unsigned int *') to parameter of type 'dma_addr_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types] &port->desc_tab_phys))) ^~~~~~~~~~~~~~~~~~~~ include/linux/dmapool.h:27:20: note: passing argument to parameter 'handle' here dma_addr_t *handle); ^
Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wan/ixp4xx_hss.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c index e7bbdb7af53ac..97968e6a6a4eb 100644 --- a/drivers/net/wan/ixp4xx_hss.c +++ b/drivers/net/wan/ixp4xx_hss.c @@ -261,7 +261,7 @@ struct port { struct hss_plat_info *plat; buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS]; struct desc *desc_tab; /* coherent */ - u32 desc_tab_phys; + dma_addr_t desc_tab_phys; unsigned int id; unsigned int clock_type, clock_rate, loopback; unsigned int initialized, carrier; @@ -861,7 +861,7 @@ static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev) dev->stats.tx_dropped++; return NETDEV_TX_OK; } - memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4); + memcpy_swab32(mem, (u32 *)((uintptr_t)skb->data & ~3), bytes / 4); dev_kfree_skb(skb); #endif
From: Chen Zhou chenzhou10@huawei.com
[ Upstream commit 8fea78029f5e6ed734ae1957bef23cfda1af4354 ]
If CONFIG_SND_ATMEL_SOC_DMA=m, build error:
sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio': (.text+0x7cd): undefined reference to `atmel_pcm_dma_platform_register'
Function atmel_pcm_dma_platform_register is defined under CONFIG SND_ATMEL_SOC_DMA, so select SND_ATMEL_SOC_DMA in CONFIG SND_ATMEL_SOC_SSC, same to CONFIG_SND_ATMEL_SOC_PDC.
Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Chen Zhou chenzhou10@huawei.com Link: https://lore.kernel.org/r/20200113133242.144550-1-chenzhou10@huawei.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/atmel/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig index 22aec9a1e9a49..838d03a138ca2 100644 --- a/sound/soc/atmel/Kconfig +++ b/sound/soc/atmel/Kconfig @@ -25,6 +25,8 @@ config SND_ATMEL_SOC_DMA
config SND_ATMEL_SOC_SSC_DMA tristate + select SND_ATMEL_SOC_DMA + select SND_ATMEL_SOC_PDC
config SND_ATMEL_SOC_SSC tristate
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit 1feedf61e7265128244f6993f23421f33dd93dbc ]
Clang warns:
../drivers/tty/synclinkmp.c:1456:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (C_CRTSCTS(tty)) { ^ ../drivers/tty/synclinkmp.c:1453:2: note: previous statement is here if (I_IXOFF(tty)) ^ ../drivers/tty/synclinkmp.c:2473:8: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] info->port.tty->hw_stopped = 0; ^ ../drivers/tty/synclinkmp.c:2471:7: note: previous statement is here if ( debug_level >= DEBUG_LEVEL_ISR ) ^ ../drivers/tty/synclinkmp.c:2482:8: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] info->port.tty->hw_stopped = 1; ^ ../drivers/tty/synclinkmp.c:2480:7: note: previous statement is here if ( debug_level >= DEBUG_LEVEL_ISR ) ^ ../drivers/tty/synclinkmp.c:2809:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) ^ ../drivers/tty/synclinkmp.c:2807:2: note: previous statement is here if (I_INPCK(info->port.tty)) ^ ../drivers/tty/synclinkmp.c:3246:3: warning: misleading indentation; statement is not part of the previous 'else' [-Wmisleading-indentation] set_signals(info); ^ ../drivers/tty/synclinkmp.c:3244:2: note: previous statement is here else ^ 5 warnings generated.
The indentation on these lines is not at all consistent, tabs and spaces are mixed together. Convert to just using tabs to be consistent with the Linux kernel coding style and eliminate these warnings from clang.
Link: https://github.com/ClangBuiltLinux/linux/issues/823 Signed-off-by: Nathan Chancellor natechancellor@gmail.com Link: https://lore.kernel.org/r/20191218024720.3528-1-natechancellor@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/synclinkmp.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index dec156586de1b..2f6df8d74b4aa 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -1467,10 +1467,10 @@ static void throttle(struct tty_struct * tty) if (I_IXOFF(tty)) send_xchar(tty, STOP_CHAR(tty));
- if (C_CRTSCTS(tty)) { + if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->serial_signals &= ~SerialSignal_RTS; - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -1496,10 +1496,10 @@ static void unthrottle(struct tty_struct * tty) send_xchar(tty, START_CHAR(tty)); }
- if (C_CRTSCTS(tty)) { + if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->serial_signals |= SerialSignal_RTS; - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -2485,7 +2485,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status ) if (status & SerialSignal_CTS) { if ( debug_level >= DEBUG_LEVEL_ISR ) printk("CTS tx start..."); - info->port.tty->hw_stopped = 0; + info->port.tty->hw_stopped = 0; tx_start(info); info->pending_bh |= BH_TRANSMIT; return; @@ -2494,7 +2494,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status ) if (!(status & SerialSignal_CTS)) { if ( debug_level >= DEBUG_LEVEL_ISR ) printk("CTS tx stop..."); - info->port.tty->hw_stopped = 1; + info->port.tty->hw_stopped = 1; tx_stop(info); } } @@ -2821,8 +2821,8 @@ static void change_params(SLMP_INFO *info) info->read_status_mask2 = OVRN; if (I_INPCK(info->port.tty)) info->read_status_mask2 |= PE | FRME; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask1 |= BRKD; + if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + info->read_status_mask1 |= BRKD; if (I_IGNPAR(info->port.tty)) info->ignore_status_mask2 |= PE | FRME; if (I_IGNBRK(info->port.tty)) { @@ -3192,7 +3192,7 @@ static int tiocmget(struct tty_struct *tty) unsigned long flags;
spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_signals(info); spin_unlock_irqrestore(&info->lock,flags);
result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS : 0) | @@ -3230,7 +3230,7 @@ static int tiocmset(struct tty_struct *tty, info->serial_signals &= ~SerialSignal_DTR;
spin_lock_irqsave(&info->lock,flags); - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags);
return 0; @@ -3242,7 +3242,7 @@ static int carrier_raised(struct tty_port *port) unsigned long flags;
spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_signals(info); spin_unlock_irqrestore(&info->lock,flags);
return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; @@ -3258,7 +3258,7 @@ static void dtr_rts(struct tty_port *port, int on) info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; else info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); }
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit 446e76873b5e4e70bdee5db2f2a894d5b4a7d081 ]
Clang warns:
../drivers/tty/synclink_gt.c:1337:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (C_CRTSCTS(tty)) { ^ ../drivers/tty/synclink_gt.c:1335:2: note: previous statement is here if (I_IXOFF(tty)) ^ ../drivers/tty/synclink_gt.c:2563:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) ^ ../drivers/tty/synclink_gt.c:2561:2: note: previous statement is here if (I_INPCK(info->port.tty)) ^ ../drivers/tty/synclink_gt.c:3221:3: warning: misleading indentation; statement is not part of the previous 'else' [-Wmisleading-indentation] set_signals(info); ^ ../drivers/tty/synclink_gt.c:3219:2: note: previous statement is here else ^ 3 warnings generated.
The indentation on these lines is not at all consistent, tabs and spaces are mixed together. Convert to just using tabs to be consistent with the Linux kernel coding style and eliminate these warnings from clang.
Link: https://github.com/ClangBuiltLinux/linux/issues/822 Signed-off-by: Nathan Chancellor natechancellor@gmail.com Link: https://lore.kernel.org/r/20191218023912.13827-1-natechancellor@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/synclink_gt.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index e645ee1cfd989..7446ce29f6770 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -1349,10 +1349,10 @@ static void throttle(struct tty_struct * tty) DBGINFO(("%s throttle\n", info->device_name)); if (I_IXOFF(tty)) send_xchar(tty, STOP_CHAR(tty)); - if (C_CRTSCTS(tty)) { + if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->signals &= ~SerialSignal_RTS; - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -1374,10 +1374,10 @@ static void unthrottle(struct tty_struct * tty) else send_xchar(tty, START_CHAR(tty)); } - if (C_CRTSCTS(tty)) { + if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->signals |= SerialSignal_RTS; - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -2576,8 +2576,8 @@ static void change_params(struct slgt_info *info) info->read_status_mask = IRQ_RXOVER; if (I_INPCK(info->port.tty)) info->read_status_mask |= MASK_PARITY | MASK_FRAMING; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask |= MASK_BREAK; + if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + info->read_status_mask |= MASK_BREAK; if (I_IGNPAR(info->port.tty)) info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING; if (I_IGNBRK(info->port.tty)) { @@ -3208,7 +3208,7 @@ static int tiocmset(struct tty_struct *tty, info->signals &= ~SerialSignal_DTR;
spin_lock_irqsave(&info->lock,flags); - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); return 0; } @@ -3219,7 +3219,7 @@ static int carrier_raised(struct tty_port *port) struct slgt_info *info = container_of(port, struct slgt_info, port);
spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_signals(info); spin_unlock_irqrestore(&info->lock,flags); return (info->signals & SerialSignal_DCD) ? 1 : 0; } @@ -3234,7 +3234,7 @@ static void dtr_rts(struct tty_port *port, int on) info->signals |= SerialSignal_RTS | SerialSignal_DTR; else info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); }
From: Simon Schwartz kern.simon@theschwartz.xyz
[ Upstream commit 39cc539f90d035a293240c9443af50be55ee81b8 ]
num_resources in the platform_device struct is declared as a u32. The for loops that iterate over num_resources use an int as the counter, which can cause infinite loops on architectures with smaller ints. Change the loop counters to u32.
Signed-off-by: Simon Schwartz kern.simon@theschwartz.xyz Link: https://lore.kernel.org/r/2201ce63a2a171ffd2ed14e867875316efcf71db.camel@the... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/base/platform.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/base/platform.c b/drivers/base/platform.c index f90b1b9bbad0d..6cdc198965f5a 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -28,6 +28,7 @@ #include <linux/limits.h> #include <linux/property.h> #include <linux/kmemleak.h> +#include <linux/types.h>
#include "base.h" #include "power/power.h" @@ -68,7 +69,7 @@ void __weak arch_setup_pdev_archdata(struct platform_device *pdev) struct resource *platform_get_resource(struct platform_device *dev, unsigned int type, unsigned int num) { - int i; + u32 i;
for (i = 0; i < dev->num_resources; i++) { struct resource *r = &dev->resource[i]; @@ -153,7 +154,7 @@ struct resource *platform_get_resource_byname(struct platform_device *dev, unsigned int type, const char *name) { - int i; + u32 i;
for (i = 0; i < dev->num_resources; i++) { struct resource *r = &dev->resource[i]; @@ -350,7 +351,8 @@ EXPORT_SYMBOL_GPL(platform_device_add_properties); */ int platform_device_add(struct platform_device *pdev) { - int i, ret; + u32 i; + int ret;
if (!pdev) return -EINVAL; @@ -437,7 +439,7 @@ EXPORT_SYMBOL_GPL(platform_device_add); */ void platform_device_del(struct platform_device *pdev) { - int i; + u32 i;
if (pdev) { device_remove_properties(&pdev->dev);
From: Geert Uytterhoeven geert+renesas@glider.be
[ Upstream commit 7c35e699c88bd60734277b26962783c60e04b494 ]
If a device already has devres items attached before probing, a warning backtrace is printed. However, this backtrace does not reveal the offending device, leaving the user uninformed. Furthermore, using WARN_ON() causes systems with panic-on-warn to reboot.
Fix this by replacing the WARN_ON() by a dev_crit() message. Abort probing the device, to prevent doing more damage to the device's resources.
Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://lore.kernel.org/r/20191206132219.28908-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/base/dd.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/base/dd.c b/drivers/base/dd.c index ee25a69630c3a..854d218ea76ac 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -341,7 +341,10 @@ static int really_probe(struct device *dev, struct device_driver *drv) atomic_inc(&probe_count); pr_debug("bus: '%s': %s: probing driver %s with device %s\n", drv->bus->name, __func__, drv->name, dev_name(dev)); - WARN_ON(!list_empty(&dev->devres_head)); + if (!list_empty(&dev->devres_head)) { + dev_crit(dev, "Resources present before probing\n"); + return -EBUSY; + }
re_probe: dev->driver = drv;
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit 7483e7a939c074d887450ef1c4d9ccc5909405f8 ]
With CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3, the stack usage in vme_fake grows above the warning limit:
drivers/vme/bridges/vme_fake.c: In function 'fake_master_read': drivers/vme/bridges/vme_fake.c:610:1: error: the frame size of 1160 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] drivers/vme/bridges/vme_fake.c: In function 'fake_master_write': drivers/vme/bridges/vme_fake.c:797:1: error: the frame size of 1160 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
The problem is that in some configurations, each call to fake_vmereadX() puts another variable on the stack.
Reduce the amount of inlining to get back to the previous state, with no function using more than 200 bytes each.
Signed-off-by: Arnd Bergmann arnd@arndb.de Link: https://lore.kernel.org/r/20200107200610.3482901-1-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vme/bridges/vme_fake.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/drivers/vme/bridges/vme_fake.c b/drivers/vme/bridges/vme_fake.c index 30b3acc938330..e81ec763b5555 100644 --- a/drivers/vme/bridges/vme_fake.c +++ b/drivers/vme/bridges/vme_fake.c @@ -418,8 +418,9 @@ static void fake_lm_check(struct fake_driver *bridge, unsigned long long addr, } }
-static u8 fake_vmeread8(struct fake_driver *bridge, unsigned long long addr, - u32 aspace, u32 cycle) +static noinline_for_stack u8 fake_vmeread8(struct fake_driver *bridge, + unsigned long long addr, + u32 aspace, u32 cycle) { u8 retval = 0xff; int i; @@ -450,8 +451,9 @@ static u8 fake_vmeread8(struct fake_driver *bridge, unsigned long long addr, return retval; }
-static u16 fake_vmeread16(struct fake_driver *bridge, unsigned long long addr, - u32 aspace, u32 cycle) +static noinline_for_stack u16 fake_vmeread16(struct fake_driver *bridge, + unsigned long long addr, + u32 aspace, u32 cycle) { u16 retval = 0xffff; int i; @@ -482,8 +484,9 @@ static u16 fake_vmeread16(struct fake_driver *bridge, unsigned long long addr, return retval; }
-static u32 fake_vmeread32(struct fake_driver *bridge, unsigned long long addr, - u32 aspace, u32 cycle) +static noinline_for_stack u32 fake_vmeread32(struct fake_driver *bridge, + unsigned long long addr, + u32 aspace, u32 cycle) { u32 retval = 0xffffffff; int i; @@ -613,8 +616,9 @@ out: return retval; }
-static void fake_vmewrite8(struct fake_driver *bridge, u8 *buf, - unsigned long long addr, u32 aspace, u32 cycle) +static noinline_for_stack void fake_vmewrite8(struct fake_driver *bridge, + u8 *buf, unsigned long long addr, + u32 aspace, u32 cycle) { int i; unsigned long long start, end, offset; @@ -643,8 +647,9 @@ static void fake_vmewrite8(struct fake_driver *bridge, u8 *buf,
}
-static void fake_vmewrite16(struct fake_driver *bridge, u16 *buf, - unsigned long long addr, u32 aspace, u32 cycle) +static noinline_for_stack void fake_vmewrite16(struct fake_driver *bridge, + u16 *buf, unsigned long long addr, + u32 aspace, u32 cycle) { int i; unsigned long long start, end, offset; @@ -673,8 +678,9 @@ static void fake_vmewrite16(struct fake_driver *bridge, u16 *buf,
}
-static void fake_vmewrite32(struct fake_driver *bridge, u32 *buf, - unsigned long long addr, u32 aspace, u32 cycle) +static noinline_for_stack void fake_vmewrite32(struct fake_driver *bridge, + u32 *buf, unsigned long long addr, + u32 aspace, u32 cycle) { int i; unsigned long long start, end, offset;
From: Ben Skeggs bskeggs@redhat.com
[ Upstream commit 7adc77aa0e11f25b0e762859219c70852cd8d56f ]
Method init is typically ordered by class in the FW image as ThreeD, TwoD, Compute.
Due to a bug in parsing the FW into our internal format, we've been accidentally sending Twod + Compute methods to the ThreeD class, as well as Compute methods to the TwoD class - oops.
Signed-off-by: Ben Skeggs bskeggs@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../gpu/drm/nouveau/nvkm/engine/gr/gk20a.c | 21 ++++++++++--------- 1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gk20a.c b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gk20a.c index de8b806b88fd9..7618b2eb4fdfd 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gk20a.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gk20a.c @@ -143,23 +143,24 @@ gk20a_gr_av_to_method(struct gf100_gr *gr, const char *fw_name,
nent = (fuc.size / sizeof(struct gk20a_fw_av));
- pack = vzalloc((sizeof(*pack) * max_classes) + - (sizeof(*init) * (nent + 1))); + pack = vzalloc((sizeof(*pack) * (max_classes + 1)) + + (sizeof(*init) * (nent + max_classes + 1))); if (!pack) { ret = -ENOMEM; goto end; }
- init = (void *)(pack + max_classes); + init = (void *)(pack + max_classes + 1);
- for (i = 0; i < nent; i++) { - struct gf100_gr_init *ent = &init[i]; + for (i = 0; i < nent; i++, init++) { struct gk20a_fw_av *av = &((struct gk20a_fw_av *)fuc.data)[i]; u32 class = av->addr & 0xffff; u32 addr = (av->addr & 0xffff0000) >> 14;
if (prevclass != class) { - pack[classidx].init = ent; + if (prevclass) /* Add terminator to the method list. */ + init++; + pack[classidx].init = init; pack[classidx].type = class; prevclass = class; if (++classidx >= max_classes) { @@ -169,10 +170,10 @@ gk20a_gr_av_to_method(struct gf100_gr *gr, const char *fw_name, } }
- ent->addr = addr; - ent->data = av->data; - ent->count = 1; - ent->pitch = 1; + init->addr = addr; + init->data = av->data; + init->count = 1; + init->pitch = 1; }
*ppack = pack;
From: YueHaibing yuehaibing@huawei.com
[ Upstream commit 1eb013473bff5f95b6fe1ca4dd7deda47257b9c2 ]
Like other cases, it should use rcu protected 'chan' rather than 'fence->channel' in nouveau_fence_wait_uevent_handler.
Fixes: 0ec5f02f0e2c ("drm/nouveau: prevent stale fence->channel pointers, and protect with rcu") Signed-off-by: YueHaibing yuehaibing@huawei.com Signed-off-by: Ben Skeggs bskeggs@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/nouveau/nouveau_fence.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c index 4bb9ab892ae19..78e521d00251c 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fence.c +++ b/drivers/gpu/drm/nouveau/nouveau_fence.c @@ -158,7 +158,7 @@ nouveau_fence_wait_uevent_handler(struct nvif_notify *notify)
fence = list_entry(fctx->pending.next, typeof(*fence), head); chan = rcu_dereference_protected(fence->channel, lockdep_is_held(&fctx->lock)); - if (nouveau_fence_update(fence->channel, fctx)) + if (nouveau_fence_update(chan, fctx)) ret = NVIF_NOTIFY_DROP; } spin_unlock_irqrestore(&fctx->lock, flags);
From: Navid Emamdoost navid.emamdoost@gmail.com
[ Upstream commit 40efb09a7f53125719e49864da008495e39aaa1e ]
In vmw_cmdbuf_res_add if drm_ht_insert_item fails the allocated memory for cres should be released.
Fixes: 18e4a4669c50 ("drm/vmwgfx: Fix compat shader namespace") Signed-off-by: Navid Emamdoost navid.emamdoost@gmail.com Reviewed-by: Thomas Hellstrom thellstrom@vmware.com Signed-off-by: Thomas Hellstrom thellstrom@vmware.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c b/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c index 1f013d45c9e9a..0c7c3005594cc 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c @@ -210,8 +210,10 @@ int vmw_cmdbuf_res_add(struct vmw_cmdbuf_res_manager *man,
cres->hash.key = user_key | (res_type << 24); ret = drm_ht_insert_item(&man->resources, &cres->hash); - if (unlikely(ret != 0)) + if (unlikely(ret != 0)) { + kfree(cres); goto out_invalid_key; + }
cres->state = VMW_CMDBUF_RES_ADD; cres->res = vmw_resource_reference(res);
From: Tony Lindgren tony@atomide.com
[ Upstream commit 91b6dec32e5c25fbdbb564d1e5af23764ec17ef1 ]
We currently have musb_set_vbus() called from two different paths. Mostly it gets called from the USB PHY via omap_musb_set_mailbox(), but in some cases it can get also called from musb_stage0_irq() rather via .set_vbus:
(musb_set_host [musb_hdrc]) (omap2430_musb_set_vbus [omap2430]) (musb_stage0_irq [musb_hdrc]) (musb_interrupt [musb_hdrc]) (omap2430_musb_interrupt [omap2430])
This is racy and will not work with introducing generic helper functions for musb_set_host() and musb_set_peripheral(). We want to get rid of the busy loops in favor of usleep_range().
Let's just get rid of .set_vbus for omap2430 glue layer and let the PHY code handle VBUS with musb_set_vbus(). Note that in the follow-up patch we can completely remove omap2430_musb_set_vbus(), but let's do it in a separate patch as this change may actually turn out to be needed as a fix.
Reported-by: Pavel Machek pavel@ucw.cz Acked-by: Pavel Machek pavel@ucw.cz Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Bin Liu b-liu@ti.com Link: https://lore.kernel.org/r/20200115132547.364-5-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/musb/omap2430.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index e8be8e39ab8fb..457ad33f4caa8 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -388,8 +388,6 @@ static const struct musb_platform_ops omap2430_ops = { .init = omap2430_musb_init, .exit = omap2430_musb_exit,
- .set_vbus = omap2430_musb_set_vbus, - .enable = omap2430_musb_enable, .disable = omap2430_musb_disable,
From: Will Deacon will@kernel.org
[ Upstream commit d71e01716b3606a6648df7e5646ae12c75babde4 ]
If, for some bizarre reason, the compiler decided to split up the write of STE DWORD 0, we could end up making a partial structure valid.
Although this probably won't happen, follow the example of the context-descriptor code and use WRITE_ONCE() to ensure atomicity of the write.
Reported-by: Jean-Philippe Brucker jean-philippe@linaro.org Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/arm-smmu-v3.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index 7bd98585d78d2..48d3820087881 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -1103,7 +1103,8 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_device *smmu, u32 sid, }
arm_smmu_sync_ste_for_sid(smmu, sid); - dst[0] = cpu_to_le64(val); + /* See comment in arm_smmu_write_ctx_desc() */ + WRITE_ONCE(dst[0], cpu_to_le64(val)); arm_smmu_sync_ste_for_sid(smmu, sid);
/* It's likely that we'll want to use the new STE soon */
From: Nick Black nlb@google.com
[ Upstream commit 54155ed4199c7aa3fd20866648024ab63c96d579 ]
A faulty userspace that calls destroy_session() before destroying the connections can trigger the failure. This patch prevents the issue by refusing to destroy the session if there are outstanding connections.
------------[ cut here ]------------ kernel BUG at mm/slub.c:306! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 1224 Comm: iscsid Not tainted 5.4.0-rc2.iscsi+ #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:__slab_free+0x181/0x350 [...] [ 1209.686056] RSP: 0018:ffffa93d4074fae0 EFLAGS: 00010246 [ 1209.686694] RAX: ffff934efa5ad800 RBX: 000000008010000a RCX: ffff934efa5ad800 [ 1209.687651] RDX: ffff934efa5ad800 RSI: ffffeb4041e96b00 RDI: ffff934efd402c40 [ 1209.688582] RBP: ffffa93d4074fb80 R08: 0000000000000001 R09: ffffffffbb5dfa26 [ 1209.689425] R10: ffff934efa5ad800 R11: 0000000000000001 R12: ffffeb4041e96b00 [ 1209.690285] R13: ffff934efa5ad800 R14: ffff934efd402c40 R15: 0000000000000000 [ 1209.691213] FS: 00007f7945dfb540(0000) GS:ffff934efda80000(0000) knlGS:0000000000000000 [ 1209.692316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1209.693013] CR2: 000055877fd3da80 CR3: 0000000077384000 CR4: 00000000000006e0 [ 1209.693897] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1209.694773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1209.695631] Call Trace: [ 1209.695957] ? __wake_up_common_lock+0x8a/0xc0 [ 1209.696712] iscsi_pool_free+0x26/0x40 [ 1209.697263] iscsi_session_teardown+0x2f/0xf0 [ 1209.698117] iscsi_sw_tcp_session_destroy+0x45/0x60 [ 1209.698831] iscsi_if_rx+0xd88/0x14e0 [ 1209.699370] netlink_unicast+0x16f/0x200 [ 1209.699932] netlink_sendmsg+0x21a/0x3e0 [ 1209.700446] sock_sendmsg+0x4f/0x60 [ 1209.700902] ___sys_sendmsg+0x2ae/0x320 [ 1209.701451] ? cp_new_stat+0x150/0x180 [ 1209.701922] __sys_sendmsg+0x59/0xa0 [ 1209.702357] do_syscall_64+0x52/0x160 [ 1209.702812] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1209.703419] RIP: 0033:0x7f7946433914 [...] [ 1209.706084] RSP: 002b:00007fffb99f2378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1209.706994] RAX: ffffffffffffffda RBX: 000055bc869eac20 RCX: 00007f7946433914 [ 1209.708082] RDX: 0000000000000000 RSI: 00007fffb99f2390 RDI: 0000000000000005 [ 1209.709120] RBP: 00007fffb99f2390 R08: 000055bc84fe9320 R09: 00007fffb99f1f07 [ 1209.710110] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000038 [ 1209.711085] R13: 000055bc8502306e R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace a2d933ede7f730d8 ]---
Link: https://lore.kernel.org/r/20191226203148.2172200-1-krisman@collabora.com Signed-off-by: Nick Black nlb@google.com Co-developed-by: Salman Qazi sqazi@google.com Signed-off-by: Salman Qazi sqazi@google.com Co-developed-by: Junho Ryu jayr@google.com Signed-off-by: Junho Ryu jayr@google.com Co-developed-by: Khazhismel Kumykov khazhy@google.com Signed-off-by: Khazhismel Kumykov khazhy@google.com Co-developed-by: Gabriel Krisman Bertazi krisman@collabora.com Signed-off-by: Gabriel Krisman Bertazi krisman@collabora.com Reviewed-by: Lee Duncan lduncan@suse.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/iscsi_tcp.c | 4 ++++ drivers/scsi/scsi_transport_iscsi.c | 26 +++++++++++++++++++++++--- 2 files changed, 27 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index d60564397be54..60c3e2bf87619 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -882,6 +882,10 @@ free_host: static void iscsi_sw_tcp_session_destroy(struct iscsi_cls_session *cls_session) { struct Scsi_Host *shost = iscsi_session_to_shost(cls_session); + struct iscsi_session *session = cls_session->dd_data; + + if (WARN_ON_ONCE(session->leadconn)) + return;
iscsi_tcp_r2tpool_free(cls_session->dd_data); iscsi_session_teardown(cls_session); diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index ab7bc4e634251..fff9c4d0f7c80 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -2964,6 +2964,24 @@ iscsi_set_path(struct iscsi_transport *transport, struct iscsi_uevent *ev) return err; }
+static int iscsi_session_has_conns(int sid) +{ + struct iscsi_cls_conn *conn; + unsigned long flags; + int found = 0; + + spin_lock_irqsave(&connlock, flags); + list_for_each_entry(conn, &connlist, conn_list) { + if (iscsi_conn_get_sid(conn) == sid) { + found = 1; + break; + } + } + spin_unlock_irqrestore(&connlock, flags); + + return found; +} + static int iscsi_set_iface_params(struct iscsi_transport *transport, struct iscsi_uevent *ev, uint32_t len) @@ -3538,10 +3556,12 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group) break; case ISCSI_UEVENT_DESTROY_SESSION: session = iscsi_session_lookup(ev->u.d_session.sid); - if (session) - transport->destroy_session(session); - else + if (!session) err = -EINVAL; + else if (iscsi_session_has_conns(ev->u.d_session.sid)) + err = -EBUSY; + else + transport->destroy_session(session); break; case ISCSI_UEVENT_UNBIND_SESSION: session = iscsi_session_lookup(ev->u.d_session.sid);
From: Sami Tolvanen samitolvanen@google.com
[ Upstream commit c54f90c2627cc316d365e3073614731e17dbc631 ]
LLVM's integrated assembler fails with the following error when building KVM:
<inline asm>:12:6: error: expected absolute expression .if kvm_update_va_mask == 0 ^ <inline asm>:21:6: error: expected absolute expression .if kvm_update_va_mask == 0 ^ <inline asm>:24:2: error: unrecognized instruction mnemonic NOT_AN_INSTRUCTION ^ LLVM ERROR: Error parsing inline asm
These errors come from ALTERNATIVE_CB and __ALTERNATIVE_CFG, which test for the existence of the callback parameter in inline assembly using the following expression:
" .if " __stringify(cb) " == 0\n"
This works with GNU as, but isn't supported by LLVM. This change splits __ALTERNATIVE_CFG and ALTINSTR_ENTRY into separate macros to fix the LLVM build.
Link: https://github.com/ClangBuiltLinux/linux/issues/472 Signed-off-by: Sami Tolvanen samitolvanen@google.com Tested-by: Nick Desaulniers ndesaulniers@google.com Reviewed-by: Kees Cook keescook@chromium.org Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/include/asm/alternative.h | 32 ++++++++++++++++++---------- 1 file changed, 21 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h index 7e842dcae4509..3626655175a2e 100644 --- a/arch/arm64/include/asm/alternative.h +++ b/arch/arm64/include/asm/alternative.h @@ -29,13 +29,16 @@ typedef void (*alternative_cb_t)(struct alt_instr *alt, void __init apply_alternatives_all(void); void apply_alternatives(void *start, size_t length);
-#define ALTINSTR_ENTRY(feature,cb) \ +#define ALTINSTR_ENTRY(feature) \ " .word 661b - .\n" /* label */ \ - " .if " __stringify(cb) " == 0\n" \ " .word 663f - .\n" /* new instruction */ \ - " .else\n" \ + " .hword " __stringify(feature) "\n" /* feature bit */ \ + " .byte 662b-661b\n" /* source len */ \ + " .byte 664f-663f\n" /* replacement len */ + +#define ALTINSTR_ENTRY_CB(feature, cb) \ + " .word 661b - .\n" /* label */ \ " .word " __stringify(cb) "- .\n" /* callback */ \ - " .endif\n" \ " .hword " __stringify(feature) "\n" /* feature bit */ \ " .byte 662b-661b\n" /* source len */ \ " .byte 664f-663f\n" /* replacement len */ @@ -56,15 +59,14 @@ void apply_alternatives(void *start, size_t length); * * Alternatives with callbacks do not generate replacement instructions. */ -#define __ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg_enabled, cb) \ +#define __ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg_enabled) \ ".if "__stringify(cfg_enabled)" == 1\n" \ "661:\n\t" \ oldinstr "\n" \ "662:\n" \ ".pushsection .altinstructions,"a"\n" \ - ALTINSTR_ENTRY(feature,cb) \ + ALTINSTR_ENTRY(feature) \ ".popsection\n" \ - " .if " __stringify(cb) " == 0\n" \ ".pushsection .altinstr_replacement, "a"\n" \ "663:\n\t" \ newinstr "\n" \ @@ -72,17 +74,25 @@ void apply_alternatives(void *start, size_t length); ".popsection\n\t" \ ".org . - (664b-663b) + (662b-661b)\n\t" \ ".org . - (662b-661b) + (664b-663b)\n" \ - ".else\n\t" \ + ".endif\n" + +#define __ALTERNATIVE_CFG_CB(oldinstr, feature, cfg_enabled, cb) \ + ".if "__stringify(cfg_enabled)" == 1\n" \ + "661:\n\t" \ + oldinstr "\n" \ + "662:\n" \ + ".pushsection .altinstructions,"a"\n" \ + ALTINSTR_ENTRY_CB(feature, cb) \ + ".popsection\n" \ "663:\n\t" \ "664:\n\t" \ - ".endif\n" \ ".endif\n"
#define _ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg, ...) \ - __ALTERNATIVE_CFG(oldinstr, newinstr, feature, IS_ENABLED(cfg), 0) + __ALTERNATIVE_CFG(oldinstr, newinstr, feature, IS_ENABLED(cfg))
#define ALTERNATIVE_CB(oldinstr, cb) \ - __ALTERNATIVE_CFG(oldinstr, "NOT_AN_INSTRUCTION", ARM64_CB_PATCH, 1, cb) + __ALTERNATIVE_CFG_CB(oldinstr, ARM64_CB_PATCH, 1, cb) #else
#include <asm/assembler.h>
From: Uwe Kleine-König u.kleine-koenig@pengutronix.de
[ Upstream commit 43efdc8f0e6d7088ec61bd55a73bf853f002d043 ]
In the old code (e.g.) mutex_destroy() was called before pwmchip_remove(). Between these two calls it is possible that a PWM callback is used which tries to grab the mutex.
Fixes: 6604c6556db9 ("pwm: Add PWM driver for OMAP using dual-mode timers") Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Thierry Reding thierry.reding@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pwm/pwm-omap-dmtimer.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c index 5ad42f33e70c1..2e15acf13893d 100644 --- a/drivers/pwm/pwm-omap-dmtimer.c +++ b/drivers/pwm/pwm-omap-dmtimer.c @@ -337,6 +337,11 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev) static int pwm_omap_dmtimer_remove(struct platform_device *pdev) { struct pwm_omap_dmtimer_chip *omap = platform_get_drvdata(pdev); + int ret; + + ret = pwmchip_remove(&omap->chip); + if (ret) + return ret;
if (pm_runtime_active(&omap->dm_timer_pdev->dev)) omap->pdata->stop(omap->dm_timer); @@ -345,7 +350,7 @@ static int pwm_omap_dmtimer_remove(struct platform_device *pdev)
mutex_destroy(&omap->mutex);
- return pwmchip_remove(&omap->chip); + return 0; }
static const struct of_device_id pwm_omap_dmtimer_of_match[] = {
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit 117fcc3053606d8db5cef8821dca15022ae578bb ]
The "drive->dn" value is a u8 and it is controlled by root only, but it could be out of bounds here so let's check.
Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ide/cmd64x.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c index b127ed60c7336..9dde8390da09b 100644 --- a/drivers/ide/cmd64x.c +++ b/drivers/ide/cmd64x.c @@ -65,6 +65,9 @@ static void cmd64x_program_timings(ide_drive_t *drive, u8 mode) struct ide_timing t; u8 arttim = 0;
+ if (drive->dn >= ARRAY_SIZE(drwtim_regs)) + return; + ide_timing_compute(drive, mode, &t, T, 0);
/*
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit ce1f31b4c0b9551dd51874dd5364654ed4ca13ae ]
The "drive->dn" variable is a u8 controlled by root.
Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ide/serverworks.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/ide/serverworks.c b/drivers/ide/serverworks.c index a97affca18abe..0f57d45484d1d 100644 --- a/drivers/ide/serverworks.c +++ b/drivers/ide/serverworks.c @@ -114,6 +114,9 @@ static void svwks_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) struct pci_dev *dev = to_pci_dev(hwif->dev); const u8 pio = drive->pio_mode - XFER_PIO_0;
+ if (drive->dn >= ARRAY_SIZE(drive_pci)) + return; + pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]);
if (svwks_csb_check(dev)) { @@ -140,6 +143,9 @@ static void svwks_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0;
+ if (drive->dn >= ARRAY_SIZE(drive_pci2)) + return; + pci_read_config_byte(dev, (0x56|hwif->channel), &ultra_timing); pci_read_config_byte(dev, 0x54, &ultra_enable);
From: Brandon Maier brandon.maier@rockwellcollins.com
[ Upstream commit a8f40111d184098cd2b3dc0c7170c42250a5fa09 ]
The remoteproc_core and remoteproc drivers all initialize with module_init(). However remoteproc drivers need the rproc_class during their probe. If one of the remoteproc drivers runs init and gets through probe before remoteproc_init() runs, a NULL pointer access of rproc_class's `glue_dirs` spinlock occurs.
Unable to handle kernel NULL pointer dereference at virtual address 000000dc pgd = c0004000 [000000dc] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.14.106-rt56 #1 Hardware name: Generic OMAP36xx (Flattened Device Tree) task: c6050000 task.stack: c604a000 PC is at rt_spin_lock+0x40/0x6c LR is at rt_spin_lock+0x28/0x6c pc : [<c0523c90>] lr : [<c0523c78>] psr: 60000013 sp : c604bdc0 ip : 00000000 fp : 00000000 r10: 00000000 r9 : c61c7c10 r8 : c6269c20 r7 : c0905888 r6 : c6269c20 r5 : 00000000 r4 : 000000d4 r3 : 000000dc r2 : c6050000 r1 : 00000002 r0 : 000000d4 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
...
[<c0523c90>] (rt_spin_lock) from [<c03b65a4>] (get_device_parent+0x54/0x17c) [<c03b65a4>] (get_device_parent) from [<c03b6bec>] (device_add+0xe0/0x5b4) [<c03b6bec>] (device_add) from [<c042adf4>] (rproc_add+0x18/0xd8) [<c042adf4>] (rproc_add) from [<c01110e4>] (my_rproc_probe+0x158/0x204) [<c01110e4>] (my_rproc_probe) from [<c03bb6b8>] (platform_drv_probe+0x34/0x70) [<c03bb6b8>] (platform_drv_probe) from [<c03b9dd4>] (driver_probe_device+0x2c8/0x420) [<c03b9dd4>] (driver_probe_device) from [<c03ba02c>] (__driver_attach+0x100/0x11c) [<c03ba02c>] (__driver_attach) from [<c03b7d08>] (bus_for_each_dev+0x7c/0xc0) [<c03b7d08>] (bus_for_each_dev) from [<c03b910c>] (bus_add_driver+0x1cc/0x264) [<c03b910c>] (bus_add_driver) from [<c03ba714>] (driver_register+0x78/0xf8) [<c03ba714>] (driver_register) from [<c010181c>] (do_one_initcall+0x100/0x190) [<c010181c>] (do_one_initcall) from [<c0800de8>] (kernel_init_freeable+0x130/0x1d0) [<c0800de8>] (kernel_init_freeable) from [<c051eee8>] (kernel_init+0x8/0x114) [<c051eee8>] (kernel_init) from [<c01175b0>] (ret_from_fork+0x14/0x24) Code: e2843008 e3c2203f f5d3f000 e5922010 (e193cf9f) ---[ end trace 0000000000000002 ]---
Signed-off-by: Brandon Maier brandon.maier@rockwellcollins.com Link: https://lore.kernel.org/r/20190530225223.136420-1-brandon.maier@rockwellcoll... Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/remoteproc/remoteproc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index c6bfb3496684e..b99780574044a 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -1488,7 +1488,7 @@ static int __init remoteproc_init(void)
return 0; } -module_init(remoteproc_init); +subsys_initcall(remoteproc_init);
static void __exit remoteproc_exit(void) {
From: Masami Hiramatsu mhiramat@kernel.org
[ Upstream commit 8b7e20a7ba54836076ff35a28349dabea4cec48f ]
Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does.
Commit
12a78d43de76 ("x86/decoder: Add new TEST instruction pattern")
added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but did not add f7 XX/001/XXX (Group 3-2).
Actually, this TEST opcode variant (ModRM.reg /1) is not described in the Intel SDM Vol2 but in AMD64 Architecture Programmer's Manual Vol.3, Appendix A.2 Table A-6. ModRM.reg Extensions for the Primary Opcode Map.
Without this fix, Randy found a warning by insn_decoder_test related to this issue as below.
HOSTCC arch/x86/tools/insn_decoder_test HOSTCC arch/x86/tools/insn_sanity TEST posttest arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this. arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1: f7 0b 00 01 08 00 testl $0x80100,(%rbx) arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 2 arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 instructions with 1 failures TEST posttest arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x871ce29c)
To fix this error, add the TEST opcode according to AMD64 APM Vol.3.
[ bp: Massage commit message. ]
Reported-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Masami Hiramatsu mhiramat@kernel.org Signed-off-by: Borislav Petkov bp@suse.de Acked-by: Randy Dunlap rdunlap@infradead.org Tested-by: Randy Dunlap rdunlap@infradead.org Link: https://lkml.kernel.org/r/157966631413.9580.10311036595431878351.stgit@devno... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/lib/x86-opcode-map.txt | 2 +- tools/objtool/arch/x86/lib/x86-opcode-map.txt | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt index 0f7eb4f5bdb71..82e105b284e01 100644 --- a/arch/x86/lib/x86-opcode-map.txt +++ b/arch/x86/lib/x86-opcode-map.txt @@ -909,7 +909,7 @@ EndTable
GrpTable: Grp3_2 0: TEST Ev,Iz -1: +1: TEST Ev,Iz 2: NOT Ev 3: NEG Ev 4: MUL rAX,Ev diff --git a/tools/objtool/arch/x86/lib/x86-opcode-map.txt b/tools/objtool/arch/x86/lib/x86-opcode-map.txt index 0f7eb4f5bdb71..82e105b284e01 100644 --- a/tools/objtool/arch/x86/lib/x86-opcode-map.txt +++ b/tools/objtool/arch/x86/lib/x86-opcode-map.txt @@ -909,7 +909,7 @@ EndTable
GrpTable: Grp3_2 0: TEST Ev,Iz -1: +1: TEST Ev,Iz 2: NOT Ev 3: NEG Ev 4: MUL rAX,Ev
From: Vasily Gorbik gor@linux.ibm.com
[ Upstream commit 45f7a0da600d3c409b5ad8d5ddddacd98ddc8840 ]
Currently backtrace from ftraced function does not contain ftraced function itself. e.g. for "path_openat":
arch_stack_walk+0x15c/0x2d8 stack_trace_save+0x50/0x68 stack_trace_call+0x15e/0x3d8 ftrace_graph_caller+0x0/0x1c <-- ftrace code do_filp_open+0x7c/0xe8 <-- ftraced function caller do_open_execat+0x76/0x1b8 open_exec+0x52/0x78 load_elf_binary+0x180/0x1160 search_binary_handler+0x8e/0x288 load_script+0x2a8/0x2b8 search_binary_handler+0x8e/0x288 __do_execve_file.isra.39+0x6fa/0xb40 __s390x_sys_execve+0x56/0x68 system_call+0xdc/0x2d8
Ftraced function is expected in the backtrace by ftrace kselftests, which are now failing. It would also be nice to have it for clarity reasons.
"ftrace_caller" itself is called without stack frame allocated for it and does not store its caller (ftraced function). Instead it simply allocates a stack frame for "ftrace_trace_function" and sets backchain to point to ftraced function stack frame (which contains ftraced function caller in saved r14).
To fix this issue make "ftrace_caller" allocate a stack frame for itself just to store ftraced function for the stack unwinder. As a result backtrace looks like the following:
arch_stack_walk+0x15c/0x2d8 stack_trace_save+0x50/0x68 stack_trace_call+0x15e/0x3d8 ftrace_graph_caller+0x0/0x1c <-- ftrace code path_openat+0x6/0xd60 <-- ftraced function do_filp_open+0x7c/0xe8 <-- ftraced function caller do_open_execat+0x76/0x1b8 open_exec+0x52/0x78 load_elf_binary+0x180/0x1160 search_binary_handler+0x8e/0x288 load_script+0x2a8/0x2b8 search_binary_handler+0x8e/0x288 __do_execve_file.isra.39+0x6fa/0xb40 __s390x_sys_execve+0x56/0x68 system_call+0xdc/0x2d8
Reported-by: Sven Schnelle sven.schnelle@ibm.com Tested-by: Sven Schnelle sven.schnelle@ibm.com Reviewed-by: Heiko Carstens heiko.carstens@de.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/kernel/mcount.S | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S index be75e8e49e43d..802a4ded9a626 100644 --- a/arch/s390/kernel/mcount.S +++ b/arch/s390/kernel/mcount.S @@ -24,6 +24,12 @@ ENTRY(ftrace_stub) #define STACK_PTREGS (STACK_FRAME_OVERHEAD) #define STACK_PTREGS_GPRS (STACK_PTREGS + __PT_GPRS) #define STACK_PTREGS_PSW (STACK_PTREGS + __PT_PSW) +#ifdef __PACK_STACK +/* allocate just enough for r14, r15 and backchain */ +#define TRACED_FUNC_FRAME_SIZE 24 +#else +#define TRACED_FUNC_FRAME_SIZE STACK_FRAME_OVERHEAD +#endif
ENTRY(_mcount) BR_EX %r14 @@ -37,9 +43,16 @@ ENTRY(ftrace_caller) #ifndef CC_USING_HOTPATCH aghi %r0,MCOUNT_RETURN_FIXUP #endif - aghi %r15,-STACK_FRAME_SIZE + # allocate stack frame for ftrace_caller to contain traced function + aghi %r15,-TRACED_FUNC_FRAME_SIZE stg %r1,__SF_BACKCHAIN(%r15) + stg %r0,(__SF_GPRS+8*8)(%r15) + stg %r15,(__SF_GPRS+9*8)(%r15) + # allocate pt_regs and stack frame for ftrace_trace_function + aghi %r15,-STACK_FRAME_SIZE stg %r1,(STACK_PTREGS_GPRS+15*8)(%r15) + aghi %r1,-TRACED_FUNC_FRAME_SIZE + stg %r1,__SF_BACKCHAIN(%r15) stg %r0,(STACK_PTREGS_PSW+8)(%r15) stmg %r2,%r14,(STACK_PTREGS_GPRS+2*8)(%r15) #ifdef CONFIG_HAVE_MARCH_Z196_FEATURES
From: Colin Ian King colin.king@canonical.com
[ Upstream commit 0707cfa5c3ef58effb143db9db6d6e20503f9dec ]
Currently the check that a u32 variable i is >= 0 is always true because the unsigned variable will never be negative, causing the loop to run forever. Fix this by changing the pre-decrement check to a zero check on i followed by a decrement of i.
Addresses-Coverity: ("Unsigned compared against 0") Fixes: 39cc539f90d0 ("driver core: platform: Prevent resouce overflow from causing infinite loops") Signed-off-by: Colin Ian King colin.king@canonical.com Reviewed-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Link: https://lore.kernel.org/r/20200116175758.88396-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/base/platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 6cdc198965f5a..bef299ef62276 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -418,7 +418,7 @@ int platform_device_add(struct platform_device *pdev) pdev->id = PLATFORM_DEVID_AUTO; }
- while (--i >= 0) { + while (i--) { struct resource *r = &pdev->resource[i]; if (r->parent) release_resource(r);
From: Peter Große pegro@friiks.de
[ Upstream commit ef7d84caa5928b40b1c93a26dbe5a3f12737c6ab ]
Lenovo Thinkpad T420s uses the same codec as T420, so apply the same quirk to enable audio output on a docking station.
Signed-off-by: Peter Große pegro@friiks.de Link: https://lore.kernel.org/r/20200122180106.9351-1-pegro@friiks.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/patch_conexant.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 8557b94e462cb..1e99500dbb6c8 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -853,6 +853,7 @@ static const struct snd_pci_quirk cxt5066_fixups[] = { SND_PCI_QUIRK(0x17aa, 0x215f, "Lenovo T510", CXT_PINCFG_LENOVO_TP410), SND_PCI_QUIRK(0x17aa, 0x21ce, "Lenovo T420", CXT_PINCFG_LENOVO_TP410), SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520", CXT_PINCFG_LENOVO_TP410), + SND_PCI_QUIRK(0x17aa, 0x21d2, "Lenovo T420s", CXT_PINCFG_LENOVO_TP410), SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT_PINCFG_LENOVO_TP410), SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT_PINCFG_LENOVO_TP410), SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo IdeaPad Z560", CXT_FIXUP_MUTE_LED_EAPD),
From: Oliver O'Halloran oohall@gmail.com
[ Upstream commit 1fb4124ca9d456656a324f1ee29b7bf942f59ac8 ]
When disabling virtual functions on an SR-IOV adapter we currently do not correctly remove the EEH state for the now-dead virtual functions. When removing the pci_dn that was created for the VF when SR-IOV was enabled we free the corresponding eeh_dev without removing it from the child device list of the eeh_pe that contained it. This can result in crashes due to the use-after-free.
Signed-off-by: Oliver O'Halloran oohall@gmail.com Reviewed-by: Sam Bobroff sbobroff@linux.ibm.com Tested-by: Sam Bobroff sbobroff@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20190821062655.19735-1-oohall@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/pci_dn.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c index 5926934370702..c8f1b78fbd0e2 100644 --- a/arch/powerpc/kernel/pci_dn.c +++ b/arch/powerpc/kernel/pci_dn.c @@ -271,9 +271,22 @@ void remove_dev_pci_data(struct pci_dev *pdev) continue;
#ifdef CONFIG_EEH - /* Release EEH device for the VF */ + /* + * Release EEH state for this VF. The PCI core + * has already torn down the pci_dev for this VF, but + * we're responsible to removing the eeh_dev since it + * has the same lifetime as the pci_dn that spawned it. + */ edev = pdn_to_eeh_dev(pdn); if (edev) { + /* + * We allocate pci_dn's for the totalvfs count, + * but only only the vfs that were activated + * have a configured PE. + */ + if (edev->pe) + eeh_rmv_from_parent_pe(edev); + pdn->edev = NULL; kfree(edev); }
From: zhangyi (F) yi.zhang@huawei.com
[ Upstream commit d0a186e0d3e7ac05cc77da7c157dae5aa59f95d9 ]
We invoke jbd2_journal_abort() to abort the journal and record errno in the jbd2 superblock when committing journal transaction besides the failure on submitting the commit record. But there is no need for the case and we can also invoke jbd2_journal_abort() instead of __jbd2_journal_abort_hard().
Fixes: 818d276ceb83a ("ext4: Add the journal checksum feature") Signed-off-by: zhangyi (F) yi.zhang@huawei.com Reviewed-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20191204124614.45424-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jbd2/commit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 72b5bbfd38447..1d06f81ee8b47 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -779,7 +779,7 @@ start_journal_io: err = journal_submit_commit_record(journal, commit_transaction, &cbh, crc32_sum); if (err) - __jbd2_journal_abort_hard(journal); + jbd2_journal_abort(journal, err); }
blk_finish_plug(&plug); @@ -872,7 +872,7 @@ start_journal_io: err = journal_submit_commit_record(journal, commit_transaction, &cbh, crc32_sum); if (err) - __jbd2_journal_abort_hard(journal); + jbd2_journal_abort(journal, err); } if (cbh) err = journal_wait_on_commit_record(journal, cbh);
From: Vincenzo Frascino vincenzo.frascino@arm.com
[ Upstream commit 76950f7162cad51d2200ebd22c620c14af38f718 ]
To perform the reserve_crashkernel() operation kexec uses SECTION_SIZE to find a memblock in a range. SECTION_SIZE is not defined for nommu systems. Trying to compile kexec in these conditions results in a build error:
linux/arch/arm/kernel/setup.c: In function ‘reserve_crashkernel’: linux/arch/arm/kernel/setup.c:1016:25: error: ‘SECTION_SIZE’ undeclared (first use in this function); did you mean ‘SECTIONS_WIDTH’? crash_size, SECTION_SIZE); ^~~~~~~~~~~~ SECTIONS_WIDTH linux/arch/arm/kernel/setup.c:1016:25: note: each undeclared identifier is reported only once for each function it appears in linux/scripts/Makefile.build:265: recipe for target 'arch/arm/kernel/setup.o' failed
Make KEXEC depend on MMU to fix the compilation issue.
Signed-off-by: Vincenzo Frascino vincenzo.frascino@arm.com Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 74a70f91b01a4..56bd9beb6a35c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2020,7 +2020,7 @@ config XIP_PHYS_ADDR config KEXEC bool "Kexec system call (EXPERIMENTAL)" depends on (!SMP || PM_SLEEP_SMP) - depends on !CPU_V7M + depends on MMU select KEXEC_CORE help kexec is a system call that implements the ability to shutdown your
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit b61156fba74f659d0bc2de8f2dbf5bad9f4b8faf ]
Clang warns:
../drivers/net/wireless/intersil/hostap/hostap_ap.c:2511:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (sta->tx_supp_rates & WLAN_RATE_5M5) ^ ../drivers/net/wireless/intersil/hostap/hostap_ap.c:2509:2: note: previous statement is here if (sta->tx_supp_rates & WLAN_RATE_2M) ^ 1 warning generated.
This warning occurs because there is a space before the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns.
Fixes: ff1d2767d5a4 ("Add HostAP wireless driver.") Link: https://github.com/ClangBuiltLinux/linux/issues/813 Signed-off-by: Nathan Chancellor natechancellor@gmail.com Reviewed-by: Nick Desaulniers ndesaulniers@google.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intersil/hostap/hostap_ap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intersil/hostap/hostap_ap.c b/drivers/net/wireless/intersil/hostap/hostap_ap.c index c995ace153ee6..30171d4c47187 100644 --- a/drivers/net/wireless/intersil/hostap/hostap_ap.c +++ b/drivers/net/wireless/intersil/hostap/hostap_ap.c @@ -2570,7 +2570,7 @@ static int prism2_hostapd_add_sta(struct ap_data *ap, sta->supported_rates[0] = 2; if (sta->tx_supp_rates & WLAN_RATE_2M) sta->supported_rates[1] = 4; - if (sta->tx_supp_rates & WLAN_RATE_5M5) + if (sta->tx_supp_rates & WLAN_RATE_5M5) sta->supported_rates[2] = 11; if (sta->tx_supp_rates & WLAN_RATE_11M) sta->supported_rates[3] = 22;
From: Colin Ian King colin.king@canonical.com
[ Upstream commit c2f9a4e4a5abfc84c01b738496b3fd2d471e0b18 ]
The loop counter addr is a u16 where as the upper limit of the loop is an int. In the unlikely event that the il->cfg->eeprom_size is greater than 64K then we end up with an infinite loop since addr will wrap around an never reach upper loop limit. Fix this by making addr an int.
Addresses-Coverity: ("Infinite loop") Fixes: be663ab67077 ("iwlwifi: split the drivers for agn and legacy devices 3945/4965") Signed-off-by: Colin Ian King colin.king@canonical.com Acked-by: Stanislaw Gruszka stf_xl@wp.pl Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlegacy/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlegacy/common.c b/drivers/net/wireless/intel/iwlegacy/common.c index 140b6ea8f7cc4..db2373fe8ac32 100644 --- a/drivers/net/wireless/intel/iwlegacy/common.c +++ b/drivers/net/wireless/intel/iwlegacy/common.c @@ -717,7 +717,7 @@ il_eeprom_init(struct il_priv *il) u32 gp = _il_rd(il, CSR_EEPROM_GP); int sz; int ret; - u16 addr; + int addr;
/* allocate eeprom */ sz = il->cfg->eeprom_size;
From: Ronnie Sahlberg lsahlber@redhat.com
[ Upstream commit fe1292686333d1dadaf84091f585ee903b9ddb84 ]
RHBZ: 1760879
Fix an oops in match_prepath() by making sure that the prepath string is not NULL before we pass it into strcmp().
This is similar to other checks we make for example in cifs_root_iget()
Signed-off-by: Ronnie Sahlberg lsahlber@redhat.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/connect.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 751bdde6515d5..961fcb40183a4 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2927,8 +2927,10 @@ match_prepath(struct super_block *sb, struct cifs_mnt_data *mnt_data) { struct cifs_sb_info *old = CIFS_SB(sb); struct cifs_sb_info *new = mnt_data->cifs_sb; - bool old_set = old->mnt_cifs_flags & CIFS_MOUNT_USE_PREFIX_PATH; - bool new_set = new->mnt_cifs_flags & CIFS_MOUNT_USE_PREFIX_PATH; + bool old_set = (old->mnt_cifs_flags & CIFS_MOUNT_USE_PREFIX_PATH) && + old->prepath; + bool new_set = (new->mnt_cifs_flags & CIFS_MOUNT_USE_PREFIX_PATH) && + new->prepath;
if (old_set && new_set && !strcmp(new->prepath, old->prepath)) return 1;
From: Marc Zyngier maz@kernel.org
[ Upstream commit 926b5dfa6b8dc666ff398044af6906b156e1d949 ]
We currently allocate redistributor region structures for individual redistributors when ACPI doesn't present us with compact MMIO regions covering multiple redistributors.
It turns out that we allocate these structures even when the redistributor is flagged as disabled by ACPI. It works fine until someone actually tries to tarse one of these structures, and access the corresponding MMIO region.
Instead, track the number of enabled redistributors, and only allocate what is required. This makes sure that there is no invalid data to misuse.
Signed-off-by: Marc Zyngier maz@kernel.org Reported-by: Heyi Guo guoheyi@huawei.com Tested-by: Heyi Guo guoheyi@huawei.com Link: https://lore.kernel.org/r/20191216062745.63397-1-guoheyi@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/irqchip/irq-gic-v3.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index f7b8681aed3f4..2ab6060031a43 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -1195,6 +1195,7 @@ static struct struct redist_region *redist_regs; u32 nr_redist_regions; bool single_redist; + int enabled_rdists; u32 maint_irq; int maint_irq_mode; phys_addr_t vcpu_base; @@ -1289,8 +1290,10 @@ static int __init gic_acpi_match_gicc(struct acpi_subtable_header *header, * If GICC is enabled and has valid gicr base address, then it means * GICR base is presented via GICC */ - if ((gicc->flags & ACPI_MADT_ENABLED) && gicc->gicr_base_address) + if ((gicc->flags & ACPI_MADT_ENABLED) && gicc->gicr_base_address) { + acpi_data.enabled_rdists++; return 0; + }
/* * It's perfectly valid firmware can pass disabled GICC entry, driver @@ -1320,8 +1323,10 @@ static int __init gic_acpi_count_gicr_regions(void)
count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT, gic_acpi_match_gicc, 0); - if (count > 0) + if (count > 0) { acpi_data.single_redist = true; + count = acpi_data.enabled_rdists; + }
return count; }
From: Ben Skeggs bskeggs@redhat.com
[ Upstream commit 0e6176c6d286316e9431b4f695940cfac4ffe6c2 ]
The implementations for most channel types contains a map of methods to priv registers in order to provide debugging info when a disp exception has been raised.
This info is missing from the implementation of PIO channels as they're rather simplistic already, however, if an exception is raised by one of them, we'd end up triggering a NULL-pointer deref. Not ideal...
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206299 Signed-off-by: Ben Skeggs bskeggs@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/nouveau/nvkm/engine/disp/channv50.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/channv50.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/channv50.c index 9d90d8b4b7e65..f5a8db1bb8b72 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/channv50.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/channv50.c @@ -72,6 +72,8 @@ nv50_disp_chan_mthd(struct nv50_disp_chan *chan, int debug)
if (debug > subdev->debug) return; + if (!mthd) + return;
for (i = 0; (list = mthd->data[i].mthd) != NULL; i++) { u32 base = chan->head * mthd->addr;
From: Vasily Averin vvs@virtuozzo.com
[ Upstream commit e4075e8bdffd93a9b6d6e1d52fabedceeca5a91b ]
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output.
Without patch: # dd bs=4 skip=1 if=/sys/kernel/tracing/set_ftrace_pid dd: /sys/kernel/tracing/set_ftrace_pid: cannot skip to specified offset id no pid 2+1 records in 2+1 records out 10 bytes copied, 0.000213285 s, 46.9 kB/s
Notice the "id" followed by "no pid".
With the patch: # dd bs=4 skip=1 if=/sys/kernel/tracing/set_ftrace_pid dd: /sys/kernel/tracing/set_ftrace_pid: cannot skip to specified offset id 0+1 records in 0+1 records out 3 bytes copied, 0.000202112 s, 14.8 kB/s
Notice that it only prints "id" and not the "no pid" afterward.
Link: http://lkml.kernel.org/r/4f87c6ad-f114-30bb-8506-c32274ce2992@virtuozzo.com
https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin vvs@virtuozzo.com Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/ftrace.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 71a40e5c3a9f0..2ae98f8bce81b 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -5455,9 +5455,10 @@ static void *fpid_next(struct seq_file *m, void *v, loff_t *pos) struct trace_array *tr = m->private; struct trace_pid_list *pid_list = rcu_dereference_sched(tr->function_pids);
- if (v == FTRACE_NO_PIDS) + if (v == FTRACE_NO_PIDS) { + (*pos)++; return NULL; - + } return trace_pid_next(pid_list, v, pos); }
From: Vasily Averin vvs@virtuozzo.com
[ Upstream commit 6722b23e7a2ace078344064a9735fb73e554e9ef ]
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output.
Without patch: # dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist # Available triggers: # traceon traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist 6+1 records in 6+1 records out 206 bytes copied, 0.00027916 s, 738 kB/s
Notice the printing of "# Available triggers:..." after the line.
With the patch: # dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist 2+1 records in 2+1 records out 88 bytes copied, 0.000526867 s, 167 kB/s
It only prints the end of the file, and does not restart.
Link: http://lkml.kernel.org/r/3c35ee24-dd3a-8119-9c19-552ed253388a@virtuozzo.com
https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin vvs@virtuozzo.com Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/trace_events_trigger.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c index 7e6971ba95417..8a88e85c8c615 100644 --- a/kernel/trace/trace_events_trigger.c +++ b/kernel/trace/trace_events_trigger.c @@ -126,9 +126,10 @@ static void *trigger_next(struct seq_file *m, void *t, loff_t *pos) { struct trace_event_file *event_file = event_file_data(m->private);
- if (t == SHOW_AVAILABLE_TRIGGERS) + if (t == SHOW_AVAILABLE_TRIGGERS) { + (*pos)++; return NULL; - + } return seq_list_next(t, &event_file->triggers, pos); }
From: Daniel Vetter daniel.vetter@ffwll.ch
[ Upstream commit ec3d65082d7dabad6fa8f66a8ef166f2d522d6b2 ]
Per at least one tester this is enough magic to recover the regression introduced for some people (but not all) in
commit b8e2b0199cc377617dc238f5106352c06dcd3fa2 Author: Peter Rosin peda@axentia.se Date: Tue Jul 4 12:36:57 2017 +0200
drm/fb-helper: factor out pseudo-palette
which for radeon had the side-effect of refactoring out a seemingly redudant writing of the color palette.
10ms in a fairly slow modeset path feels like an acceptable form of duct-tape, so maybe worth a shot and see what sticks.
Cc: Alex Deucher alexander.deucher@amd.com Cc: Michel Dänzer michel.daenzer@amd.com Signed-off-by: Daniel Vetter daniel.vetter@intel.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/radeon/radeon_display.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 8b6f8aa238063..432ad7d73cb9b 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -110,6 +110,8 @@ static void dce5_crtc_load_lut(struct drm_crtc *crtc)
DRM_DEBUG_KMS("%d\n", radeon_crtc->crtc_id);
+ msleep(10); + WREG32(NI_INPUT_CSC_CONTROL + radeon_crtc->crtc_offset, (NI_INPUT_CSC_GRPH_MODE(NI_INPUT_CSC_BYPASS) | NI_INPUT_CSC_OVL_MODE(NI_INPUT_CSC_BYPASS)));
From: wangyan wangyan122@huawei.com
[ Upstream commit 9f16ca48fc818a17de8be1f75d08e7f4addc4497 ]
I found a NULL pointer dereference in ocfs2_update_inode_fsync_trans(), handle->h_transaction may be NULL in this situation:
ocfs2_file_write_iter ->__generic_file_write_iter ->generic_perform_write ->ocfs2_write_begin ->ocfs2_write_begin_nolock ->ocfs2_write_cluster_by_desc ->ocfs2_write_cluster ->ocfs2_mark_extent_written ->ocfs2_change_extent_flag ->ocfs2_split_extent ->ocfs2_try_to_merge_extent ->ocfs2_extend_rotate_transaction ->ocfs2_extend_trans ->jbd2_journal_restart ->jbd2__journal_restart // handle->h_transaction is NULL here ->handle->h_transaction = NULL; ->start_this_handle /* journal aborted due to storage network disconnection, return error */ ->return -EROFS; /* line 3806 in ocfs2_try_to_merge_extent (), it will ignore ret error. */ ->ret = 0; ->... ->ocfs2_write_end ->ocfs2_write_end_nolock ->ocfs2_update_inode_fsync_trans // NULL pointer dereference ->oi->i_sync_tid = handle->h_transaction->t_tid;
The information of NULL pointer dereference as follows: JBD2: Detected IO errors while flushing file data on dm-11-45 Aborting journal on device dm-11-45. JBD2: Error -5 detected when updating journal superblock for dm-11-45. (dd,22081,3):ocfs2_extend_trans:474 ERROR: status = -30 (dd,22081,3):ocfs2_try_to_merge_extent:3877 ERROR: status = -30 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000e74e1338 [0000000000000008] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] SMP Process dd (pid: 22081, stack limit = 0x00000000584f35a9) CPU: 3 PID: 22081 Comm: dd Kdump: loaded Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019 pstate: 60400009 (nZCv daif +PAN -UAO) pc : ocfs2_write_end_nolock+0x2b8/0x550 [ocfs2] lr : ocfs2_write_end_nolock+0x2a0/0x550 [ocfs2] sp : ffff0000459fba70 x29: ffff0000459fba70 x28: 0000000000000000 x27: ffff807ccf7f1000 x26: 0000000000000001 x25: ffff807bdff57970 x24: ffff807caf1d4000 x23: ffff807cc79e9000 x22: 0000000000001000 x21: 000000006c6cd000 x20: ffff0000091d9000 x19: ffff807ccb239db0 x18: ffffffffffffffff x17: 000000000000000e x16: 0000000000000007 x15: ffff807c5e15bd78 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000001 x9 : 0000000000000228 x8 : 000000000000000c x7 : 0000000000000fff x6 : ffff807a308ed6b0 x5 : ffff7e01f10967c0 x4 : 0000000000000018 x3 : d0bc661572445600 x2 : 0000000000000000 x1 : 000000001b2e0200 x0 : 0000000000000000 Call trace: ocfs2_write_end_nolock+0x2b8/0x550 [ocfs2] ocfs2_write_end+0x4c/0x80 [ocfs2] generic_perform_write+0x108/0x1a8 __generic_file_write_iter+0x158/0x1c8 ocfs2_file_write_iter+0x668/0x950 [ocfs2] __vfs_write+0x11c/0x190 vfs_write+0xac/0x1c0 ksys_write+0x6c/0xd8 __arm64_sys_write+0x24/0x30 el0_svc_common+0x78/0x130 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc
To prevent NULL pointer dereference in this situation, we use is_handle_aborted() before using handle->h_transaction->t_tid.
Link: http://lkml.kernel.org/r/03e750ab-9ade-83aa-b000-b9e81e34e539@huawei.com Signed-off-by: Yan Wang wangyan122@huawei.com Reviewed-by: Jun Piao piaojun@huawei.com Cc: Mark Fasheh mark@fasheh.com Cc: Joel Becker jlbec@evilplan.org Cc: Junxiao Bi junxiao.bi@oracle.com Cc: Joseph Qi jiangqi903@gmail.com Cc: Changwei Ge gechangwei@live.cn Cc: Gang He ghe@suse.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ocfs2/journal.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h index 497a4171ef61f..bfb50fc51528f 100644 --- a/fs/ocfs2/journal.h +++ b/fs/ocfs2/journal.h @@ -637,9 +637,11 @@ static inline void ocfs2_update_inode_fsync_trans(handle_t *handle, { struct ocfs2_inode_info *oi = OCFS2_I(inode);
- oi->i_sync_tid = handle->h_transaction->t_tid; - if (datasync) - oi->i_datasync_tid = handle->h_transaction->t_tid; + if (!is_handle_aborted(handle)) { + oi->i_sync_tid = handle->h_transaction->t_tid; + if (datasync) + oi->i_datasync_tid = handle->h_transaction->t_tid; + } }
#endif /* OCFS2_JOURNAL_H */
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit 4e456fee215677584cafa7f67298a76917e89c64 ]
Clang warns:
../lib/scatterlist.c:314:5: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] return -ENOMEM; ^ ../lib/scatterlist.c:311:4: note: previous statement is here if (prv) ^ 1 warning generated.
This warning occurs because there is a space before the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns.
Link: http://lkml.kernel.org/r/20191218033606.11942-1-natechancellor@gmail.com Link: https://github.com/ClangBuiltLinux/linux/issues/830 Fixes: edce6820a9fd ("scatterlist: prevent invalid free when alloc fails") Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- lib/scatterlist.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/scatterlist.c b/lib/scatterlist.c index a854cc39f084f..ef8c14a56d0a7 100644 --- a/lib/scatterlist.c +++ b/lib/scatterlist.c @@ -317,7 +317,7 @@ int __sg_alloc_table(struct sg_table *table, unsigned int nents, if (prv) table->nents = ++table->orig_nents;
- return -ENOMEM; + return -ENOMEM; }
sg_init_table(sg, alloc_size);
From: Yunfeng Ye yeyunfeng@huawei.com
[ Upstream commit aacee5446a2a1aa35d0a49dab289552578657fb4 ]
The variable inode may be NULL in reiserfs_insert_item(), but there is no check before accessing the member of inode.
Fix this by adding NULL pointer check before calling reiserfs_debug().
Link: http://lkml.kernel.org/r/79c5135d-ff25-1cc9-4e99-9f572b88cc00@huawei.com Signed-off-by: Yunfeng Ye yeyunfeng@huawei.com Cc: zhengbin zhengbin13@huawei.com Cc: Hu Shiyuan hushiyuan@huawei.com Cc: Feilong Lin linfeilong@huawei.com Cc: Jan Kara jack@suse.cz Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/reiserfs/stree.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/reiserfs/stree.c b/fs/reiserfs/stree.c index a97e352d05d3b..5f5fff0688776 100644 --- a/fs/reiserfs/stree.c +++ b/fs/reiserfs/stree.c @@ -2249,7 +2249,8 @@ error_out: /* also releases the path */ unfix_nodes(&s_ins_balance); #ifdef REISERQUOTA_DEBUG - reiserfs_debug(th->t_super, REISERFS_DEBUG_CODE, + if (inode) + reiserfs_debug(th->t_super, REISERFS_DEBUG_CODE, "reiserquota insert_item(): freeing %u id=%u type=%c", quota_bytes, inode->i_uid, head2type(ih)); #endif
From: Coly Li colyli@suse.de
[ Upstream commit 7c02b0055f774ed9afb6e1c7724f33bf148ffdc0 ]
In bset.h, macro bset_bkey_last() is defined as, bkey_idx((struct bkey *) (i)->d, (i)->keys)
Parameter i can be variable type of data structure, the macro always works once the type of struct i has member 'd' and 'keys'.
bset_bkey_last() is also used in macro csum_set() to calculate the checksum of a on-disk data structure. When csum_set() is used to calculate checksum of on-disk bcache super block, the parameter 'i' data type is struct cache_sb_disk. Inside struct cache_sb_disk (also in struct cache_sb) the member keys is __u16 type. But bkey_idx() expects unsigned int (a 32bit width), so there is problem when sending parameters via stack to call bkey_idx().
Sparse tool from Intel 0day kbuild system reports this incompatible problem. bkey_idx() is part of user space API, so the simplest fix is to cast the (i)->keys to unsigned int type in macro bset_bkey_last().
Reported-by: kbuild test robot lkp@intel.com Signed-off-by: Coly Li colyli@suse.de Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/bcache/bset.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/md/bcache/bset.h b/drivers/md/bcache/bset.h index b935839ab79c6..f483041eed986 100644 --- a/drivers/md/bcache/bset.h +++ b/drivers/md/bcache/bset.h @@ -380,7 +380,8 @@ void bch_btree_keys_stats(struct btree_keys *, struct bset_stats *);
/* Bkey utility code */
-#define bset_bkey_last(i) bkey_idx((struct bkey *) (i)->d, (i)->keys) +#define bset_bkey_last(i) bkey_idx((struct bkey *) (i)->d, \ + (unsigned int)(i)->keys)
static inline struct bkey *bset_bkey_idx(struct bset *i, unsigned idx) {
From: Zenghui Yu yuzenghui@huawei.com
[ Upstream commit 107945227ac5d4c37911c7841b27c64b489ce9a9 ]
It looks like an obvious mistake to use its_mapc_cmd descriptor when building the INVALL command block. It so far worked by luck because both its_mapc_cmd.col and its_invall_cmd.col sit at the same offset of the ITS command descriptor, but we should not rely on it.
Fixes: cc2d3216f53c ("irqchip: GICv3: ITS command queue") Signed-off-by: Zenghui Yu yuzenghui@huawei.com Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20191202071021.1251-1-yuzenghui@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/irqchip/irq-gic-v3-its.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 0c0cd2768d6e9..d1efbb8dadc53 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -365,7 +365,7 @@ static struct its_collection *its_build_invall_cmd(struct its_cmd_block *cmd, struct its_cmd_desc *desc) { its_encode_cmd(cmd, GITS_CMD_INVALL); - its_encode_collection(cmd, desc->its_mapc_cmd.col->col_id); + its_encode_collection(cmd, desc->its_invall_cmd.col->col_id);
its_fixup_cmd(cmd);
From: Andrei Otcheretianski andrei.otcheretianski@intel.com
[ Upstream commit baa6cf8450b72dcab11f37c47efce7c5b9b8ad0f ]
Use a unique name when registering a thermal zone. Otherwise, with multiple NICS, we hit the following warning during the unregistration.
WARNING: CPU: 2 PID: 3525 at fs/sysfs/group.c:255 RIP: 0010:sysfs_remove_group+0x80/0x90 Call Trace: dpm_sysfs_remove+0x57/0x60 device_del+0x5a/0x350 ? sscanf+0x4e/0x70 device_unregister+0x1a/0x60 hwmon_device_unregister+0x4a/0xa0 thermal_remove_hwmon_sysfs+0x175/0x1d0 thermal_zone_device_unregister+0x188/0x1e0 iwl_mvm_thermal_exit+0xe7/0x100 [iwlmvm] iwl_op_mode_mvm_stop+0x27/0x180 [iwlmvm] _iwl_op_mode_stop.isra.3+0x2b/0x50 [iwlwifi] iwl_opmode_deregister+0x90/0xa0 [iwlwifi] __exit_compat+0x10/0x2c7 [iwlmvm] __x64_sys_delete_module+0x13f/0x270 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Andrei Otcheretianski andrei.otcheretianski@intel.com Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/mvm/tt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c index c5203568a47ac..f0f205c3aadb7 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c @@ -736,7 +736,8 @@ static struct thermal_zone_device_ops tzone_ops = { static void iwl_mvm_thermal_zone_register(struct iwl_mvm *mvm) { int i; - char name[] = "iwlwifi"; + char name[16]; + static atomic_t counter = ATOMIC_INIT(0);
if (!iwl_mvm_is_tt_in_fw(mvm)) { mvm->tz_device.tzone = NULL; @@ -746,6 +747,7 @@ static void iwl_mvm_thermal_zone_register(struct iwl_mvm *mvm)
BUILD_BUG_ON(ARRAY_SIZE(name) >= THERMAL_NAME_LENGTH);
+ sprintf(name, "iwlwifi_%u", atomic_inc_return(&counter) & 0xFF); mvm->tz_device.tzone = thermal_zone_device_register(name, IWL_MAX_DTS_TRIPS, IWL_WRITABLE_TRIPS_MSK,
From: Shubhrajyoti Datta shubhrajyoti.datta@xilinx.com
[ Upstream commit 061d2c1d593076424c910cb1b64ecdb5c9a6923f ]
In case the start + cache size is more than the max int the start overflows. Prevent the same.
Signed-off-by: Shubhrajyoti Datta shubhrajyoti.datta@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/microblaze/kernel/cpu/cache.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index 0bde47e4fa694..dcba53803fa5f 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -92,7 +92,8 @@ static inline void __disable_dcache_nomsr(void) #define CACHE_LOOP_LIMITS(start, end, cache_line_length, cache_size) \ do { \ int align = ~(cache_line_length - 1); \ - end = min(start + cache_size, end); \ + if (start < UINT_MAX - cache_size) \ + end = min(start + cache_size, end); \ start &= align; \ } while (0)
From: Zhiqiang Liu liuzhiqiang26@huawei.com
[ Upstream commit c8ab422553c81a0eb070329c63725df1cd1425bc ]
In brd_init func, rd_nr num of brd_device are firstly allocated and add in brd_devices, then brd_devices are traversed to add each brd_device by calling add_disk func. When allocating brd_device, the disk->first_minor is set to i * max_part, if rd_nr * max_part is larger than MINORMASK, two different brd_device may have the same devt, then only one of them can be successfully added. when rmmod brd.ko, it will cause oops when calling brd_exit.
Follow those steps: # modprobe brd rd_nr=3 rd_size=102400 max_part=1048576 # rmmod brd then, the oops will appear.
Oops log: [ 726.613722] Call trace: [ 726.614175] kernfs_find_ns+0x24/0x130 [ 726.614852] kernfs_find_and_get_ns+0x44/0x68 [ 726.615749] sysfs_remove_group+0x38/0xb0 [ 726.616520] blk_trace_remove_sysfs+0x1c/0x28 [ 726.617320] blk_unregister_queue+0x98/0x100 [ 726.618105] del_gendisk+0x144/0x2b8 [ 726.618759] brd_exit+0x68/0x560 [brd] [ 726.619501] __arm64_sys_delete_module+0x19c/0x2a0 [ 726.620384] el0_svc_common+0x78/0x130 [ 726.621057] el0_svc_handler+0x38/0x78 [ 726.621738] el0_svc+0x8/0xc [ 726.622259] Code: aa0203f6 aa0103f7 aa1e03e0 d503201f (7940e260)
Here, we add brd_check_and_reset_par func to check and limit max_part par.
-- V5->V6: - remove useless code
V4->V5:(suggested by Ming Lei) - make sure max_part is not larger than DISK_MAX_PARTS
V3->V4:(suggested by Ming Lei) - remove useless change - add one limit of max_part
V2->V3: (suggested by Ming Lei) - clear .minors when running out of consecutive minor space in brd_alloc - remove limit of rd_nr
V1->V2: - add more checks in brd_check_par_valid as suggested by Ming Lei.
Signed-off-by: Zhiqiang Liu liuzhiqiang26@huawei.com Reviewed-by: Bob Liu bob.liu@oracle.com Reviewed-by: Ming Lei ming.lei@redhat.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/brd.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/block/brd.c b/drivers/block/brd.c index 0c76d4016eebe..7e35574a17dfc 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -581,6 +581,25 @@ static struct kobject *brd_probe(dev_t dev, int *part, void *data) return kobj; }
+static inline void brd_check_and_reset_par(void) +{ + if (unlikely(!max_part)) + max_part = 1; + + /* + * make sure 'max_part' can be divided exactly by (1U << MINORBITS), + * otherwise, it is possiable to get same dev_t when adding partitions. + */ + if ((1U << MINORBITS) % max_part != 0) + max_part = 1UL << fls(max_part); + + if (max_part > DISK_MAX_PARTS) { + pr_info("brd: max_part can't be larger than %d, reset max_part = %d.\n", + DISK_MAX_PARTS, DISK_MAX_PARTS); + max_part = DISK_MAX_PARTS; + } +} + static int __init brd_init(void) { struct brd_device *brd, *next; @@ -604,8 +623,7 @@ static int __init brd_init(void) if (register_blkdev(RAMDISK_MAJOR, "ramdisk")) return -EIO;
- if (unlikely(!max_part)) - max_part = 1; + brd_check_and_reset_par();
for (i = 0; i < rd_nr; i++) { brd = brd_alloc(i);
From: Vasily Averin vvs@virtuozzo.com
[ Upstream commit 9f198a2ac543eaaf47be275531ad5cbd50db3edf ]
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin vvs@virtuozzo.com Signed-off-by: Mike Marshall hubcap@omnibond.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/orangefs/orangefs-debugfs.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/fs/orangefs/orangefs-debugfs.c b/fs/orangefs/orangefs-debugfs.c index 0748a26598fca..7d7df003f9d8d 100644 --- a/fs/orangefs/orangefs-debugfs.c +++ b/fs/orangefs/orangefs-debugfs.c @@ -304,6 +304,7 @@ static void *help_start(struct seq_file *m, loff_t *pos)
static void *help_next(struct seq_file *m, void *v, loff_t *pos) { + (*pos)++; gossip_debug(GOSSIP_DEBUGFS_DEBUG, "help_next: start\n");
return NULL;
From: Jaihind Yadav jaihindyadav@codeaurora.org
[ Upstream commit 030b995ad9ece9fa2d218af4429c1c78c2342096 ]
In AVC update we don't call avc_node_kill() when avc_xperms_populate() fails, resulting in the avc->avc_cache.active_nodes counter having a false value. In last patch this changes was missed , so correcting it.
Fixes: fa1aa143ac4a ("selinux: extended permissions for ioctls") Signed-off-by: Jaihind Yadav jaihindyadav@codeaurora.org Signed-off-by: Ravi Kumar Siddojigari rsiddoji@codeaurora.org [PM: merge fuzz, minor description cleanup] Signed-off-by: Paul Moore paul@paul-moore.com Signed-off-by: Sasha Levin sashal@kernel.org --- security/selinux/avc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/security/selinux/avc.c b/security/selinux/avc.c index 52f3c550abcc4..f3c473791b698 100644 --- a/security/selinux/avc.c +++ b/security/selinux/avc.c @@ -865,7 +865,7 @@ static int avc_update_node(u32 event, u32 perms, u8 driver, u8 xperm, u32 ssid, if (orig->ae.xp_node) { rc = avc_xperms_populate(node, orig->ae.xp_node); if (rc) { - kmem_cache_free(avc_node_cachep, node); + avc_node_kill(node); goto out_unlock; } }
From: Firo Yang firo.yang@suse.com
[ Upstream commit 0f90522591fd09dd201065c53ebefdfe3c6b55cb ]
Recent months, our customer reported several kernel crashes all preceding with following message: NETDEV WATCHDOG: eth2 (enic): transmit queue 0 timed out Error message of one of those crashes: BUG: unable to handle kernel paging request at ffffffffa007e090
After analyzing severl vmcores, I found that most of crashes are caused by memory corruption. And all the corrupted memory areas are overwritten by data of network packets. Moreover, I also found that the tx queues were enabled over watchdog reset.
After going through the source code, I found that in enic_stop(), the tx queues stopped by netif_tx_disable() could be woken up over a small time window between netif_tx_disable() and the napi_disable() by the following code path: napi_poll-> enic_poll_msix_wq-> vnic_cq_service-> enic_wq_service-> netif_wake_subqueue(enic->netdev, q_number)-> test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &txq->state) In turn, upper netowrk stack could queue skb to ENIC NIC though enic_hard_start_xmit(). And this might introduce some race condition.
Our customer comfirmed that this kind of kernel crash doesn't occur over 90 days since they applied this patch.
Signed-off-by: Firo Yang firo.yang@suse.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/cisco/enic/enic_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -1806,10 +1806,10 @@ static int enic_stop(struct net_device * }
netif_carrier_off(netdev); - netif_tx_disable(netdev); if (vnic_dev_get_intr_mode(enic->vdev) == VNIC_DEV_INTR_MODE_MSIX) for (i = 0; i < enic->wq_count; i++) napi_disable(&enic->napi[enic_cq_wq(enic, i)]); + netif_tx_disable(netdev);
if (!enic_is_dynamic(enic) && !enic_is_sriov_vf(enic)) enic_dev_del_station_addr(enic);
From: Davide Caratti dcaratti@redhat.com
[ Upstream commit 1afa3cc90f8fb745c777884d79eaa1001d6927a6 ]
unlike other classifiers that can be offloaded (i.e. users can set flags like 'skip_hw' and 'skip_sw'), 'cls_matchall' doesn't validate the size of netlink attribute 'TCA_MATCHALL_FLAGS' provided by user: add a proper entry to mall_policy.
Fixes: b87f7936a932 ("net/sched: Add match-all classifier hw offloading.") Signed-off-by: Davide Caratti dcaratti@redhat.com Acked-by: Jiri Pirko jiri@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/sched/cls_matchall.c | 1 + 1 file changed, 1 insertion(+)
--- a/net/sched/cls_matchall.c +++ b/net/sched/cls_matchall.c @@ -111,6 +111,7 @@ static unsigned long mall_get(struct tcf static const struct nla_policy mall_policy[TCA_MATCHALL_MAX + 1] = { [TCA_MATCHALL_UNSPEC] = { .type = NLA_UNSPEC }, [TCA_MATCHALL_CLASSID] = { .type = NLA_U32 }, + [TCA_MATCHALL_FLAGS] = { .type = NLA_U32 }, };
static int mall_set_parms(struct net *net, struct tcf_proto *tp,
From: Davide Caratti dcaratti@redhat.com
[ Upstream commit e2debf0852c4d66ba1a8bde12869b196094c70a7 ]
unlike other classifiers that can be offloaded (i.e. users can set flags like 'skip_hw' and 'skip_sw'), 'cls_flower' doesn't validate the size of netlink attribute 'TCA_FLOWER_FLAGS' provided by user: add a proper entry to fl_policy.
Fixes: 5b33f48842fa ("net/flower: Introduce hardware offload support") Signed-off-by: Davide Caratti dcaratti@redhat.com Acked-by: Jiri Pirko jiri@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/sched/cls_flower.c | 1 + 1 file changed, 1 insertion(+)
--- a/net/sched/cls_flower.c +++ b/net/sched/cls_flower.c @@ -364,6 +364,7 @@ static const struct nla_policy fl_policy [TCA_FLOWER_KEY_TCP_DST_MASK] = { .type = NLA_U16 }, [TCA_FLOWER_KEY_UDP_SRC_MASK] = { .type = NLA_U16 }, [TCA_FLOWER_KEY_UDP_DST_MASK] = { .type = NLA_U16 }, + [TCA_FLOWER_FLAGS] = { .type = NLA_U32 }, };
static void fl_set_key_val(struct nlattr **tb,
From: Linus Torvalds torvalds@linux-foundation.org
commit 2e90ca68b0d2f5548804f22f0dd61145516171e3 upstream.
Jordy Zomer reported a KASAN out-of-bounds read in the floppy driver in wait_til_ready().
Which on the face of it can't happen, since as Willy Tarreau points out, the function does no particular memory access. Except through the FDCS macro, which just indexes a static allocation through teh current fdc, which is always checked against N_FDC.
Except the checking happens after we've already assigned the value.
The floppy driver is a disgrace (a lot of it going back to my original horrd "design"), and has no real maintainer. Nobody has the hardware, and nobody really cares. But it still gets used in virtual environment because it's one of those things that everybody supports.
The whole thing should be re-written, or at least parts of it should be seriously cleaned up. The 'current fdc' index, which is used by the FDCS macro, and which is often shadowed by a local 'fdc' variable, is a prime example of how not to write code.
But because nobody has the hardware or the motivation, let's just fix up the immediate problem with a nasty band-aid: test the fdc index before actually assigning it to the static 'fdc' variable.
Reported-by: Jordy Zomer jordy@simplyhacker.com Cc: Willy Tarreau w@1wt.eu Cc: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/block/floppy.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -848,14 +848,17 @@ static void reset_fdc_info(int mode) /* selects the fdc and drive, and enables the fdc's input/dma. */ static void set_fdc(int drive) { + unsigned int new_fdc = fdc; + if (drive >= 0 && drive < N_DRIVE) { - fdc = FDC(drive); + new_fdc = FDC(drive); current_drive = drive; } - if (fdc != 1 && fdc != 0) { + if (new_fdc >= N_FDC) { pr_info("bad fdc value\n"); return; } + fdc = new_fdc; set_dor(fdc, ~0, 8); #if N_FDC > 1 set_dor(1 - fdc, ~8, 0);
From: Jiri Slaby jslaby@suse.cz
commit 687bff0cd08f790d540cfb7b2349f0d876cdddec upstream.
When pasting a selection to a vt, the task is set as INTERRUPTIBLE while waiting for a tty to unthrottle. But signals are not handled at all. Normally, this is not a problem as tty_ldisc_receive_buf receives all the goods and a user has no reason to interrupt the task.
There are two scenarios where this matters: 1) when the tty is throttled and a signal is sent to the process, it spins on a CPU until the tty is unthrottled. schedule() does not really echedule, but returns immediately, of course. 2) when the sel_buffer becomes invalid, KASAN prevents any reads from it and the loop simply does not proceed and spins forever (causing the tty to throttle, but the code never sleeps, the same as above). This sometimes happens as there is a race in the sel_buffer handling code.
So add signal handling to this ioctl (TIOCL_PASTESEL) and return -EINTR in case a signal is pending.
Signed-off-by: Jiri Slaby jslaby@suse.cz Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20200210081131.23572-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/tty/vt/selection.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -341,6 +341,7 @@ int paste_selection(struct tty_struct *t unsigned int count; struct tty_ldisc *ld; DECLARE_WAITQUEUE(wait, current); + int ret = 0;
console_lock(); poke_blanked_console(); @@ -354,6 +355,10 @@ int paste_selection(struct tty_struct *t add_wait_queue(&vc->paste_wait, &wait); while (sel_buffer && sel_buffer_lth > pasted) { set_current_state(TASK_INTERRUPTIBLE); + if (signal_pending(current)) { + ret = -EINTR; + break; + } if (tty_throttled(tty)) { schedule(); continue; @@ -369,5 +374,5 @@ int paste_selection(struct tty_struct *t
tty_buffer_unlock_exclusive(&vc->port); tty_ldisc_deref(ld); - return 0; + return ret; }
From: Suren Baghdasaryan surenb@google.com
commit 6d67b0290b4b84c477e6a2fc6e005e174d3c7786 upstream.
When ashmem file is mmapped, the resulting vma->vm_file points to the backing shmem file with the generic fops that do not check ashmem permissions like fops of ashmem do. If an mremap is done on the ashmem region, then the permission checks will be skipped. Fix that by disallowing mapping operation on the backing shmem file.
Reported-by: Jann Horn jannh@google.com Signed-off-by: Suren Baghdasaryan surenb@google.com Cc: stable stable@vger.kernel.org # 4.4,4.9,4.14,4.18,5.4 Signed-off-by: Todd Kjos tkjos@google.com Reviewed-by: Joel Fernandes (Google) joel@joelfernandes.org Link: https://lore.kernel.org/r/20200127235616.48920-1-tkjos@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/staging/android/ashmem.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
--- a/drivers/staging/android/ashmem.c +++ b/drivers/staging/android/ashmem.c @@ -370,8 +370,23 @@ static inline vm_flags_t calc_vm_may_fla _calc_vm_trans(prot, PROT_EXEC, VM_MAYEXEC); }
+static int ashmem_vmfile_mmap(struct file *file, struct vm_area_struct *vma) +{ + /* do not allow to mmap ashmem backing shmem file directly */ + return -EPERM; +} + +static unsigned long +ashmem_vmfile_get_unmapped_area(struct file *file, unsigned long addr, + unsigned long len, unsigned long pgoff, + unsigned long flags) +{ + return current->mm->get_unmapped_area(file, addr, len, pgoff, flags); +} + static int ashmem_mmap(struct file *file, struct vm_area_struct *vma) { + static struct file_operations vmfile_fops; struct ashmem_area *asma = file->private_data; int ret = 0;
@@ -412,6 +427,19 @@ static int ashmem_mmap(struct file *file } vmfile->f_mode |= FMODE_LSEEK; asma->file = vmfile; + /* + * override mmap operation of the vmfile so that it can't be + * remapped which would lead to creation of a new vma with no + * asma permission checks. Have to override get_unmapped_area + * as well to prevent VM_BUG_ON check for f_ops modification. + */ + if (!vmfile_fops.mmap) { + vmfile_fops = *vmfile->f_op; + vmfile_fops.mmap = ashmem_vmfile_mmap; + vmfile_fops.get_unmapped_area = + ashmem_vmfile_get_unmapped_area; + } + vmfile->f_op = &vmfile_fops; } get_file(asma->file);
From: Malcolm Priestley tvboxspy@gmail.com
commit 93134df520f23f4e9998c425b8987edca7016817 upstream.
bb_pre_ed_rssi is an u8 rx_dm always returns negative signed values add minus operator to always yield positive.
fixes issue where rx sensitivity is always set to maximum because the unsigned numbers were always greater then 100.
Fixes: 63b9907f58f1 ("staging: vt6656: mac80211 conversion: create rx function.") Cc: stable stable@vger.kernel.org Signed-off-by: Malcolm Priestley tvboxspy@gmail.com Link: https://lore.kernel.org/r/aceac98c-6e69-3ce1-dfec-2bf27b980221@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/staging/vt6656/dpc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/vt6656/dpc.c +++ b/drivers/staging/vt6656/dpc.c @@ -140,7 +140,7 @@ int vnt_rx_data(struct vnt_private *priv
vnt_rf_rssi_to_dbm(priv, *rssi, &rx_dbm);
- priv->bb_pre_ed_rssi = (u8)rx_dbm + 1; + priv->bb_pre_ed_rssi = (u8)-rx_dbm + 1; priv->current_rssi = priv->bb_pre_ed_rssi;
frame = skb_data + 8;
From: Mathias Nyman mathias.nyman@linux.intel.com
commit f148b9f402ef002b57bcff3964d45abc8ffb6c3f upstream.
A Full-speed bulk USB audio device (DJ-Tech CTRL) with a invalid Maximum Packet Size of 4 causes a xHC "Parameter Error" at enumeration.
This is because valid Maximum packet sizes for Full-speed bulk endpoints are 8, 16, 32 and 64 bytes. Hosts are not required to support other values than these. See usb 2 specs section 5.8.3 for details.
The device starts working after forcing the maximum packet size to 8. This is most likely the case with other devices as well, so force the maximum packet size to a valid range.
Cc: stable@vger.kernel.org Reported-by: Rene D Obermueller cmdrrdo@gmail.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20200210134553.9144-2-mathias.nyman@linux.intel.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/host/xhci-mem.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1532,9 +1532,15 @@ int xhci_endpoint_init(struct xhci_hcd * /* Allow 3 retries for everything but isoc, set CErr = 3 */ if (!usb_endpoint_xfer_isoc(&ep->desc)) err_count = 3; - /* Some devices get this wrong */ - if (usb_endpoint_xfer_bulk(&ep->desc) && udev->speed == USB_SPEED_HIGH) - max_packet = 512; + /* HS bulk max packet should be 512, FS bulk supports 8, 16, 32 or 64 */ + if (usb_endpoint_xfer_bulk(&ep->desc)) { + if (udev->speed == USB_SPEED_HIGH) + max_packet = 512; + if (udev->speed == USB_SPEED_FULL) { + max_packet = rounddown_pow_of_two(max_packet); + max_packet = clamp_val(max_packet, 8, 64); + } + } /* xHCI 1.0 and 1.1 indicates that ctrl ep avg TRB Length should be 8 */ if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version >= 0x100) avg_trb_len = 8;
From: EJ Hsu ejh@nvidia.com
commit 3e99862c05a9caa5a27969f41566b428696f5a9a upstream.
When a uas disk is plugged into an external hub, uas_probe() will be called by the hub thread to do the probe. It will first create a SCSI host and then do the scan for this host. During the scan, it will probe the LUN using SCSI INQUERY command which will be packed in the URB and submitted to uas disk.
There might be a chance that this external hub with uas disk attached is unplugged during the scan. In this case, uas driver will fail to submit the URB (due to the NOTATTACHED state of uas device) and try to put this SCSI command back to request queue waiting for next chance to run.
In normal case, this cycle will terminate when hub thread gets disconnection event and calls into uas_disconnect() accordingly. But in this case, uas_disconnect() will not be called because hub thread of external hub gets stuck waiting for the completion of this SCSI command. A deadlock happened.
In this fix, uas will call scsi_scan_host() asynchronously to avoid the blocking of hub thread.
Signed-off-by: EJ Hsu ejh@nvidia.com Acked-by: Oliver Neukum oneukum@suse.com Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20200130092506.102760-1-ejh@nvidia.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/storage/uas.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-)
--- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -46,6 +46,7 @@ struct uas_dev_info { struct scsi_cmnd *cmnd[MAX_CMNDS]; spinlock_t lock; struct work_struct work; + struct work_struct scan_work; /* for async scanning */ };
enum { @@ -115,6 +116,17 @@ out: spin_unlock_irqrestore(&devinfo->lock, flags); }
+static void uas_scan_work(struct work_struct *work) +{ + struct uas_dev_info *devinfo = + container_of(work, struct uas_dev_info, scan_work); + struct Scsi_Host *shost = usb_get_intfdata(devinfo->intf); + + dev_dbg(&devinfo->intf->dev, "starting scan\n"); + scsi_scan_host(shost); + dev_dbg(&devinfo->intf->dev, "scan complete\n"); +} + static void uas_add_work(struct uas_cmd_info *cmdinfo) { struct scsi_pointer *scp = (void *)cmdinfo; @@ -989,6 +1001,7 @@ static int uas_probe(struct usb_interfac init_usb_anchor(&devinfo->data_urbs); spin_lock_init(&devinfo->lock); INIT_WORK(&devinfo->work, uas_do_work); + INIT_WORK(&devinfo->scan_work, uas_scan_work);
result = uas_configure_endpoints(devinfo); if (result) @@ -1005,7 +1018,9 @@ static int uas_probe(struct usb_interfac if (result) goto free_streams;
- scsi_scan_host(shost); + /* Submit the delayed_work for SCSI-device scanning */ + schedule_work(&devinfo->scan_work); + return result;
free_streams: @@ -1173,6 +1188,12 @@ static void uas_disconnect(struct usb_in usb_kill_anchored_urbs(&devinfo->data_urbs); uas_zap_pending(devinfo, DID_NO_CONNECT);
+ /* + * Prevent SCSI scanning (if it hasn't started yet) + * or wait for the SCSI-scanning routine to stop. + */ + cancel_work_sync(&devinfo->scan_work); + scsi_remove_host(shost); uas_free_streams(devinfo); scsi_host_put(shost);
From: Richard Dodd richard.o.dodd@gmail.com
commit b692056db8ecc7f452b934f016c17348282b7699 upstream.
Currently, the SourceControl will stay in power-down mode after resuming from suspend. This patch resets the device after suspend to power it up.
Signed-off-by: Richard Dodd richard.o.dodd@gmail.com Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20200212142220.36892-1-richard.o.dodd@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+)
--- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -291,6 +291,9 @@ static const struct usb_device_id usb_qu /* INTEL VALUE SSD */ { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* novation SoundControl XL */ + { USB_DEVICE(0x1235, 0x0061), .driver_info = USB_QUIRK_RESET_RESUME }, + { } /* terminating entry must be last */ };
From: Alan Stern stern@rowland.harvard.edu
commit 8099f58f1ecddf4f374f4828a3dff8397c7cbd74 upstream.
Paul Zimmerman reports that his USB Bluetooth adapter sometimes crashes following system resume, when it receives a Get-Device-Descriptor request while it is busy doing something else.
Such a request was added by commit a4f55d8b8c14 ("usb: hub: Check device descriptor before resusciation"). It gets sent when the hub driver's work thread checks whether a connect-change event on an enabled port really indicates a new device has been connected, as opposed to an old device momentarily disconnecting and then reconnecting (which can happen with xHCI host controllers, since they automatically enable connected ports).
The same kind of thing occurs when a port's power session is lost during system suspend. When the system wakes up it sees a connect-change event on the port, and if the child device's persist_enabled flag was set then hub_activate() sets the device's reset_resume flag as well as the port's bit in hub->change_bits. The reset-resume code then takes responsibility for checking that the same device is still attached to the port, and it does this as part of the device's resume pathway. By the time the hub driver's work thread starts up again, the device has already been fully reinitialized and is busy doing its own thing. There's no need for the work thread to do the same check a second time, and in fact this unnecessary check is what caused the problem that Paul observed.
Note that performing the unnecessary check is not actually a bug. Devices are supposed to be able to send descriptors back to the host even when they are busy doing something else. The underlying cause of Paul's problem lies in his Bluetooth adapter. Nevertheless, we shouldn't perform the same check twice in a row -- and as a nice side benefit, removing the extra check allows the Bluetooth adapter to work more reliably.
The work thread performs its check when it sees that the port's bit is set in hub->change_bits. In this situation that bit is interpreted as though a connect-change event had occurred on the port _after_ the reset-resume, which is not what actually happened.
One possible fix would be to make the reset-resume code clear the port's bit in hub->change_bits. But it seems simpler to just avoid setting the bit during hub_activate() in the first place. That's what this patch does.
(Proving that the patch is correct when CONFIG_PM is disabled requires a little thought. In that setting hub_activate() will be called only for initialization and resets, since there won't be any resumes or reset-resumes. During initialization and hub resets the hub doesn't have any child devices, and so this code path never gets executed.)
Reported-and-tested-by: Paul Zimmerman pauldzim@gmail.com Signed-off-by: Alan Stern stern@rowland.harvard.edu Link: https://marc.info/?t=157949360700001&r=1&w=2 CC: David Heinzelmann heinzelmann.david@gmail.com CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2001311037460.1577-100000@iolanthe... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/core/hub.c | 5 ----- 1 file changed, 5 deletions(-)
--- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1187,11 +1187,6 @@ static void hub_activate(struct usb_hub #ifdef CONFIG_PM udev->reset_resume = 1; #endif - /* Don't set the change_bits when the device - * was powered off. - */ - if (test_bit(port1, hub->power_bits)) - set_bit(port1, hub->change_bits);
} else { /* The power session is gone; tell hub_wq */
From: Larry Finger Larry.Finger@lwfinger.net
commit 499c405b2b80bb3a04425ba3541d20305e014d3e upstream.
In routine rtw_hostapd_ioctl(), the user-controlled p->length is assumed to be at least the size of struct ieee_param size, but this assumption is never checked. This could result in out-of-bounds read/write on kernel heap in case a p->length less than the size of struct ieee_param is specified by the user. If p->length is allowed to be greater than the size of the struct, then a malicious user could be wasting kernel memory. Fixes commit a2c60d42d97c ("Add files for new driver - part 16").
Reported by: Pietro Oliva pietroliva@gmail.com Cc: Pietro Oliva pietroliva@gmail.com Cc: Stable stable@vger.kernel.org Fixes: a2c60d42d97c ("staging: r8188eu: Add files for new driver - part 16") Signed-off-by: Larry Finger Larry.Finger@lwfinger.net Link: https://lore.kernel.org/r/20200210180235.21691-2-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/staging/rtl8188eu/os_dep/ioctl_linux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c +++ b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c @@ -2859,7 +2859,7 @@ static int rtw_hostapd_ioctl(struct net_ goto out; }
- if (!p->pointer) { + if (!p->pointer || p->length != sizeof(struct ieee_param)) { ret = -EINVAL; goto out; }
From: Larry Finger Larry.Finger@lwfinger.net
commit 4ddf8ab8d15ddbc52eefb44eb64e38466ce1f70f upstream.
In routine wpa_supplicant_ioctl(), the user-controlled p->length is checked to be at least the size of struct ieee_param size, but the code does not detect the case where p->length is greater than the size of the struct, thus a malicious user could be wasting kernel memory. Fixes commit a2c60d42d97c ("Add files for new driver - part 16").
Reported by: Pietro Oliva pietroliva@gmail.com Cc: Pietro Oliva pietroliva@gmail.com Cc: Stable stable@vger.kernel.org Fixes commit a2c60d42d97c ("Add files for new driver - part 16"). Signed-off-by: Larry Finger Larry.Finger@lwfinger.net Link: https://lore.kernel.org/r/20200210180235.21691-4-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/staging/rtl8188eu/os_dep/ioctl_linux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c +++ b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c @@ -2052,7 +2052,7 @@ static int wpa_supplicant_ioctl(struct n struct ieee_param *param; uint ret = 0;
- if (p->length < sizeof(struct ieee_param) || !p->pointer) { + if (!p->pointer || p->length != sizeof(struct ieee_param)) { ret = -EINVAL; goto out; }
From: Borislav Petkov bp@suse.de
commit 6e5cf31fbe651bed7ba1df768f2e123531132417 upstream.
threshold_create_bank() creates a bank descriptor per MCA error thresholding counter which can be controlled over sysfs. It publishes the pointer to that bank in a per-CPU variable and then goes on to create additional thresholding blocks if the bank has such.
However, that creation of additional blocks in allocate_threshold_blocks() can fail, leading to a use-after-free through the per-CPU pointer.
Therefore, publish that pointer only after all blocks have been setup successfully.
Fixes: 019f34fccfd5 ("x86, MCE, AMD: Move shared bank to node descriptor") Reported-by: Saar Amar Saar.Amar@microsoft.com Reported-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Borislav Petkov bp@suse.de Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20200128140846.phctkvx5btiexvbx@kili.mountain Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/x86/kernel/cpu/mcheck/mce_amd.c | 33 ++++++++++++++++----------------- 1 file changed, 16 insertions(+), 17 deletions(-)
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -879,8 +879,9 @@ static const char *get_name(unsigned int return buf_mcatype; }
-static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank, - unsigned int block, u32 address) +static int allocate_threshold_blocks(unsigned int cpu, struct threshold_bank *tb, + unsigned int bank, unsigned int block, + u32 address) { struct threshold_block *b = NULL; u32 low, high; @@ -924,16 +925,12 @@ static int allocate_threshold_blocks(uns
INIT_LIST_HEAD(&b->miscj);
- if (per_cpu(threshold_banks, cpu)[bank]->blocks) { - list_add(&b->miscj, - &per_cpu(threshold_banks, cpu)[bank]->blocks->miscj); - } else { - per_cpu(threshold_banks, cpu)[bank]->blocks = b; - } + if (tb->blocks) + list_add(&b->miscj, &tb->blocks->miscj); + else + tb->blocks = b;
- err = kobject_init_and_add(&b->kobj, &threshold_ktype, - per_cpu(threshold_banks, cpu)[bank]->kobj, - get_name(bank, b)); + err = kobject_init_and_add(&b->kobj, &threshold_ktype, tb->kobj, get_name(bank, b)); if (err) goto out_free; recurse: @@ -941,7 +938,7 @@ recurse: if (!address) return 0;
- err = allocate_threshold_blocks(cpu, bank, block, address); + err = allocate_threshold_blocks(cpu, tb, bank, block, address); if (err) goto out_free;
@@ -1026,8 +1023,6 @@ static int threshold_create_bank(unsigne goto out_free; }
- per_cpu(threshold_banks, cpu)[bank] = b; - if (is_shared_bank(bank)) { atomic_set(&b->cpus, 1);
@@ -1038,9 +1033,13 @@ static int threshold_create_bank(unsigne } }
- err = allocate_threshold_blocks(cpu, bank, 0, msr_ops.misc(bank)); - if (!err) - goto out; + err = allocate_threshold_blocks(cpu, b, bank, 0, msr_ops.misc(bank)); + if (err) + goto out_free; + + per_cpu(threshold_banks, cpu)[bank] = b; + + return 0;
out_free: kfree(b);
From: Thomas Gleixner tglx@linutronix.de
commit 51dede9c05df2b78acd6dcf6a17d21f0877d2d7b upstream.
Accessing the MCA thresholding controls in sysfs concurrently with CPU hotplug can lead to a couple of KASAN-reported issues:
BUG: KASAN: use-after-free in sysfs_file_ops+0x155/0x180 Read of size 8 at addr ffff888367578940 by task grep/4019
and
BUG: KASAN: use-after-free in show_error_count+0x15c/0x180 Read of size 2 at addr ffff888368a05514 by task grep/4454
for example. Both result from the fact that the threshold block creation/teardown code frees the descriptor memory itself instead of defining proper ->release function and leaving it to the driver core to take care of that, after all sysfs accesses have completed.
Do that and get rid of the custom freeing code, fixing the above UAFs in the process.
[ bp: write commit message. ]
Fixes: 95268664390b ("[PATCH] x86_64: mce_amd support for family 0x10 processors") Signed-off-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Borislav Petkov bp@suse.de Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200214082801.13836-1-bp@alien8.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/x86/kernel/cpu/mcheck/mce_amd.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -846,9 +846,12 @@ static const struct sysfs_ops threshold_ .store = store, };
+static void threshold_block_release(struct kobject *kobj); + static struct kobj_type threshold_ktype = { .sysfs_ops = &threshold_ops, .default_attrs = default_attrs, + .release = threshold_block_release, };
static const char *get_name(unsigned int bank, struct threshold_block *b) @@ -1073,8 +1076,12 @@ static int threshold_create_device(unsig return err; }
-static void deallocate_threshold_block(unsigned int cpu, - unsigned int bank) +static void threshold_block_release(struct kobject *kobj) +{ + kfree(to_block(kobj)); +} + +static void deallocate_threshold_block(unsigned int cpu, unsigned int bank) { struct threshold_block *pos = NULL; struct threshold_block *tmp = NULL; @@ -1084,13 +1091,11 @@ static void deallocate_threshold_block(u return;
list_for_each_entry_safe(pos, tmp, &head->blocks->miscj, miscj) { - kobject_put(&pos->kobj); list_del(&pos->miscj); - kfree(pos); + kobject_put(&pos->kobj); }
- kfree(per_cpu(threshold_banks, cpu)[bank]->blocks); - per_cpu(threshold_banks, cpu)[bank]->blocks = NULL; + kobject_put(&head->blocks->kobj); }
static void __threshold_remove_blocks(struct threshold_bank *b)
From: Nicolas Ferre nicolas.ferre@microchip.com
commit 04b5bfe3dc94e64d0590c54045815cb5183fb095 upstream.
In atmel_shutdown() we call atmel_stop_rx() and atmel_stop_tx() functions. Prevent the rx restart that is implemented in RS485 or ISO7816 modes when calling atmel_stop_tx() by using the atomic information tasklet_shutdown that is already in place for this purpose.
Fixes: 98f2082c3ac4 ("tty/serial: atmel: enforce tasklet init and termination sequences") Signed-off-by: Nicolas Ferre nicolas.ferre@microchip.com Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20200210152053.8289-1-nicolas.ferre@microchip.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/tty/serial/atmel_serial.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -501,7 +501,8 @@ static void atmel_stop_tx(struct uart_po atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask);
if (atmel_uart_is_half_duplex(port)) - atmel_start_rx(port); + if (!atomic_read(&atmel_port->tasklet_shutdown)) + atmel_start_rx(port);
}
From: Fugang Duan fugang.duan@nxp.com
commit f76707831829530ffdd3888bebc108aecefccaa0 upstream.
There has oops as below happen on i.MX8MP EVK platform that has 6G bytes DDR memory.
when (xmit->tail < xmit->head) && (xmit->head == 0), it setups one sg entry with sg->length is zero: sg_set_buf(sgl + 1, xmit->buf, xmit->head);
if xmit->buf is allocated from >4G address space, and SDMA only support <4G address space, then dma_map_sg() will call swiotlb_map() to do bounce buffer copying and mapping.
But swiotlb_map() don't allow sg entry's length is zero, otherwise report BUG_ON().
So the patch is to correct the tx DMA scatter list.
Oops: [ 287.675715] kernel BUG at kernel/dma/swiotlb.c:497! [ 287.680592] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 287.686075] Modules linked in: [ 287.689133] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.3-00016-g3fdc4e0-dirty #10 [ 287.696872] Hardware name: FSL i.MX8MP EVK (DT) [ 287.701402] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 287.706199] pc : swiotlb_tbl_map_single+0x1fc/0x310 [ 287.711076] lr : swiotlb_map+0x60/0x148 [ 287.714909] sp : ffff800010003c00 [ 287.718221] x29: ffff800010003c00 x28: 0000000000000000 [ 287.723533] x27: 0000000000000040 x26: ffff800011ae0000 [ 287.728844] x25: ffff800011ae09f8 x24: 0000000000000000 [ 287.734155] x23: 00000001b7af9000 x22: 0000000000000000 [ 287.739465] x21: ffff000176409c10 x20: 00000000001f7ffe [ 287.744776] x19: ffff000176409c10 x18: 000000000000002e [ 287.750087] x17: 0000000000000000 x16: 0000000000000000 [ 287.755397] x15: 0000000000000000 x14: 0000000000000000 [ 287.760707] x13: ffff00017f334000 x12: 0000000000000001 [ 287.766018] x11: 00000000001fffff x10: 0000000000000000 [ 287.771328] x9 : 0000000000000003 x8 : 0000000000000000 [ 287.776638] x7 : 0000000000000000 x6 : 0000000000000000 [ 287.781949] x5 : 0000000000200000 x4 : 0000000000000000 [ 287.787259] x3 : 0000000000000001 x2 : 00000001b7af9000 [ 287.792570] x1 : 00000000fbfff000 x0 : 0000000000000000 [ 287.797881] Call trace: [ 287.800328] swiotlb_tbl_map_single+0x1fc/0x310 [ 287.804859] swiotlb_map+0x60/0x148 [ 287.808347] dma_direct_map_page+0xf0/0x130 [ 287.812530] dma_direct_map_sg+0x78/0xe0 [ 287.816453] imx_uart_dma_tx+0x134/0x2f8 [ 287.820374] imx_uart_dma_tx_callback+0xd8/0x168 [ 287.824992] vchan_complete+0x194/0x200 [ 287.828828] tasklet_action_common.isra.0+0x154/0x1a0 [ 287.833879] tasklet_action+0x24/0x30 [ 287.837540] __do_softirq+0x120/0x23c [ 287.841202] irq_exit+0xb8/0xd8 [ 287.844343] __handle_domain_irq+0x64/0xb8 [ 287.848438] gic_handle_irq+0x5c/0x148 [ 287.852185] el1_irq+0xb8/0x180 [ 287.855327] cpuidle_enter_state+0x84/0x360 [ 287.859508] cpuidle_enter+0x34/0x48 [ 287.863083] call_cpuidle+0x18/0x38 [ 287.866571] do_idle+0x1e0/0x280 [ 287.869798] cpu_startup_entry+0x20/0x40 [ 287.873721] rest_init+0xd4/0xe0 [ 287.876949] arch_call_rest_init+0xc/0x14 [ 287.880958] start_kernel+0x420/0x44c [ 287.884622] Code: 9124c021 9417aff8 a94363f7 17ffffd5 (d4210000) [ 287.890718] ---[ end trace 5bc44c4ab6b009ce ]--- [ 287.895334] Kernel panic - not syncing: Fatal exception in interrupt [ 287.901686] SMP: stopping secondary CPUs [ 288.905607] SMP: failed to stop secondary CPUs 0-1 [ 288.910395] Kernel Offset: disabled [ 288.913882] CPU features: 0x0002,2000200c [ 288.917888] Memory Limit: none [ 288.920944] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Reported-by: Eagle Zhou eagle.zhou@nxp.com Tested-by: Eagle Zhou eagle.zhou@nxp.com Signed-off-by: Fugang Duan fugang.duan@nxp.com Cc: stable stable@vger.kernel.org Fixes: 7942f8577f2a ("serial: imx: TX DMA: clean up sg initialization") Reviewed-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Link: https://lore.kernel.org/r/1581401761-6378-1-git-send-email-fugang.duan@nxp.c... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/tty/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -532,7 +532,7 @@ static void imx_dma_tx(struct imx_port *
sport->tx_bytes = uart_circ_chars_pending(xmit);
- if (xmit->tail < xmit->head) { + if (xmit->tail < xmit->head || xmit->head == 0) { sport->dma_tx_nents = 1; sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes); } else {
From: Ioanna Alifieraki ioanna-maria.alifieraki@canonical.com
commit edf28f4061afe4c2d9eb1c3323d90e882c1d6800 upstream.
This reverts commit a97955844807e327df11aa33869009d14d6b7de0.
Commit a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()") removes a lock that is needed. This leads to a process looping infinitely in exit_sem() and can also lead to a crash. There is a reproducer available in [1] and with the commit reverted the issue does not reproduce anymore.
Using the reproducer found in [1] is fairly easy to reach a point where one of the child processes is looping infinitely in exit_sem between for(;;) and if (semid == -1) block, while it's trying to free its last sem_undo structure which has already been freed by freeary().
Each sem_undo struct is on two lists: one per semaphore set (list_id) and one per process (list_proc). The list_id list tracks undos by semaphore set, and the list_proc by process.
Undo structures are removed either by freeary() or by exit_sem(). The freeary function is invoked when the user invokes a syscall to remove a semaphore set. During this operation freeary() traverses the list_id associated with the semaphore set and removes the undo structures from both the list_id and list_proc lists.
For this case, exit_sem() is called at process exit. Each process contains a struct sem_undo_list (referred to as "ulp") which contains the head for the list_proc list. When the process exits, exit_sem() traverses this list to remove each sem_undo struct. As in freeary(), whenever a sem_undo struct is removed from list_proc, it is also removed from the list_id list.
Removing elements from list_id is safe for both exit_sem() and freeary() due to sem_lock(). Removing elements from list_proc is not safe; freeary() locks &un->ulp->lock when it performs list_del_rcu(&un->list_proc) but exit_sem() does not (locking was removed by commit a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()").
This can result in the following situation while executing the reproducer [1] : Consider a child process in exit_sem() and the parent in freeary() (because of semctl(sid[i], NSEM, IPC_RMID)).
- The list_proc for the child contains the last two undo structs A and B (the rest have been removed either by exit_sem() or freeary()).
- The semid for A is 1 and semid for B is 2.
- exit_sem() removes A and at the same time freeary() removes B.
- Since A and B have different semid sem_lock() will acquire different locks for each process and both can proceed.
The bug is that they remove A and B from the same list_proc at the same time because only freeary() acquires the ulp lock. When exit_sem() removes A it makes ulp->list_proc.next to point at B and at the same time freeary() removes B setting B->semid=-1.
At the next iteration of for(;;) loop exit_sem() will try to remove B.
The only way to break from for(;;) is for (&un->list_proc == &ulp->list_proc) to be true which is not. Then exit_sem() will check if B->semid=-1 which is and will continue looping in for(;;) until the memory for B is reallocated and the value at B->semid is changed.
At that point, exit_sem() will crash attempting to unlink B from the lists (this can be easily triggered by running the reproducer [1] a second time).
To prove this scenario instrumentation was added to keep information about each sem_undo (un) struct that is removed per process and per semaphore set (sma).
CPU0 CPU1 [caller holds sem_lock(sma for A)] ... freeary() exit_sem() ... ... ... sem_lock(sma for B) spin_lock(A->ulp->lock) ... list_del_rcu(un_A->list_proc) list_del_rcu(un_B->list_proc)
Undo structures A and B have different semid and sem_lock() operations proceed. However they belong to the same list_proc list and they are removed at the same time. This results into ulp->list_proc.next pointing to the address of B which is already removed.
After reverting commit a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()") the issue was no longer reproducible.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1694779
Link: http://lkml.kernel.org/r/20191211191318.11860-1-ioanna-maria.alifieraki@cano... Fixes: a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()") Signed-off-by: Ioanna Alifieraki ioanna-maria.alifieraki@canonical.com Acked-by: Manfred Spraul manfred@colorfullife.com Acked-by: Herton R. Krzesinski herton@redhat.com Cc: Arnd Bergmann arnd@arndb.de Cc: Catalin Marinas catalin.marinas@arm.com Cc: malat@debian.org Cc: Joel Fernandes (Google) joel@joelfernandes.org Cc: Davidlohr Bueso dave@stgolabs.net Cc: Jay Vosburgh jay.vosburgh@canonical.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- ipc/sem.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
--- a/ipc/sem.c +++ b/ipc/sem.c @@ -2159,11 +2159,9 @@ void exit_sem(struct task_struct *tsk) ipc_assert_locked_object(&sma->sem_perm); list_del(&un->list_id);
- /* we are the last process using this ulp, acquiring ulp->lock - * isn't required. Besides that, we are also protected against - * IPC_RMID as we hold sma->sem_perm lock now - */ + spin_lock(&ulp->lock); list_del_rcu(&un->list_proc); + spin_unlock(&ulp->lock);
/* perform adjustments registered in un */ for (i = 0; i < sma->sem_nsems; i++) {
From: Mathias Nyman mathias.nyman@linux.intel.com
commit a3ae87dce3a5abe0b57c811bab02b2564b574106 upstream.
Intel Comet Lake based platform require the XHCI_PME_STUCK_QUIRK quirk as well. Without this xHC can not enter D3 in runtime suspend.
Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20200210134553.9144-5-mathias.nyman@linux.intel.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/host/xhci-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -53,6 +53,7 @@ #define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8 #define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8 #define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0 +#define PCI_DEVICE_ID_INTEL_CML_XHCI 0xa3af
#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142
@@ -170,7 +171,8 @@ static void xhci_pci_quirks(struct devic pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) { + pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_CML_XHCI)) { xhci->quirks |= XHCI_PME_STUCK_QUIRK; } if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
From: Miaohe Lin linmiaohe@huawei.com
commit 7455a8327674e1a7c9a1f5dd1b0743ab6713f6d1 upstream.
Commit 13db77347db1 ("KVM: x86: don't notify userspace IOAPIC on edge EOI") said, edge-triggered interrupts don't set a bit in TMR, which means that IOAPIC isn't notified on EOI. And var level indicates level-triggered interrupt. But commit 3159d36ad799 ("KVM: x86: use generic function for MSI parsing") replace var level with irq.level by mistake. Fix it by changing irq.level to irq.trig_mode.
Cc: stable@vger.kernel.org Fixes: 3159d36ad799 ("KVM: x86: use generic function for MSI parsing") Signed-off-by: Miaohe Lin linmiaohe@huawei.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/x86/kvm/irq_comm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/irq_comm.c +++ b/arch/x86/kvm/irq_comm.c @@ -436,7 +436,7 @@ void kvm_scan_ioapic_routes(struct kvm_v
kvm_set_msi_irq(vcpu->kvm, entry, &irq);
- if (irq.level && kvm_apic_match_dest(vcpu, NULL, 0, + if (irq.trig_mode && kvm_apic_match_dest(vcpu, NULL, 0, irq.dest_id, irq.dest_mode)) __set_bit(irq.vector, ioapic_handled_vectors); }
From: Al Viro viro@zeniv.linux.org.uk
[ Upstream commit 1b3bce4d6bf839304a90951b4b25a5863533bf2a ]
Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/vt/vt_ioctl.c | 68 ++++++++++++++++----------------------- 1 file changed, 27 insertions(+), 41 deletions(-)
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 638eb9bbd59fa..d4c1b100f3b6d 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -850,58 +850,44 @@ int vt_ioctl(struct tty_struct *tty,
case VT_RESIZEX: { - struct vt_consize __user *vtconsize = up; - ushort ll,cc,vlin,clin,vcol,ccol; + struct vt_consize v; if (!perm) return -EPERM; - if (!access_ok(VERIFY_READ, vtconsize, - sizeof(struct vt_consize))) { - ret = -EFAULT; - break; - } + if (copy_from_user(&v, up, sizeof(struct vt_consize))) + return -EFAULT; /* FIXME: Should check the copies properly */ - __get_user(ll, &vtconsize->v_rows); - __get_user(cc, &vtconsize->v_cols); - __get_user(vlin, &vtconsize->v_vlin); - __get_user(clin, &vtconsize->v_clin); - __get_user(vcol, &vtconsize->v_vcol); - __get_user(ccol, &vtconsize->v_ccol); - vlin = vlin ? vlin : vc->vc_scan_lines; - if (clin) { - if (ll) { - if (ll != vlin/clin) { - /* Parameters don't add up */ - ret = -EINVAL; - break; - } - } else - ll = vlin/clin; + if (!v.v_vlin) + v.v_vlin = vc->vc_scan_lines; + if (v.v_clin) { + int rows = v.v_vlin/v.v_clin; + if (v.v_rows != rows) { + if (v.v_rows) /* Parameters don't add up */ + return -EINVAL; + v.v_rows = rows; + } } - if (vcol && ccol) { - if (cc) { - if (cc != vcol/ccol) { - ret = -EINVAL; - break; - } - } else - cc = vcol/ccol; + if (v.v_vcol && v.v_ccol) { + int cols = v.v_vcol/v.v_ccol; + if (v.v_cols != cols) { + if (v.v_cols) + return -EINVAL; + v.v_cols = cols; + } }
- if (clin > 32) { - ret = -EINVAL; - break; - } - + if (v.v_clin > 32) + return -EINVAL; + for (i = 0; i < MAX_NR_CONSOLES; i++) { if (!vc_cons[i].d) continue; console_lock(); - if (vlin) - vc_cons[i].d->vc_scan_lines = vlin; - if (clin) - vc_cons[i].d->vc_font.height = clin; + if (v.v_vlin) + vc_cons[i].d->vc_scan_lines = v.v_vlin; + if (v.v_clin) + vc_cons[i].d->vc_font.height = v.v_clin; vc_cons[i].d->vc_resize_user = 1; - vc_resize(vc_cons[i].d, cc, ll); + vc_resize(vc_cons[i].d, v.v_cols, v.v_rows); console_unlock(); } break;
From: Eric Dumazet edumazet@google.com
[ Upstream commit 6cd1ed50efd88261298577cd92a14f2768eddeeb ]
We need to make sure vc_cons[i].d is not NULL after grabbing console_lock(), or risk a crash.
general protection fault, probably for non-canonical address 0xdffffc0000000068: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000340-0x0000000000000347] CPU: 1 PID: 19462 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883 Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40 RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000 RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340 RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f FS: 00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tty_ioctl+0xa37/0x14f0 drivers/tty/tty_io.c:2660 vfs_ioctl fs/ioctl.c:47 [inline] ksys_ioctl+0x123/0x180 fs/ioctl.c:763 __do_sys_ioctl fs/ioctl.c:772 [inline] __se_sys_ioctl fs/ioctl.c:770 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45b399 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f7d13c11c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f7d13c126d4 RCX: 000000000045b399 RDX: 0000000020000080 RSI: 000000000000560a RDI: 0000000000000003 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000666 R14: 00000000004c7f04 R15: 000000000075bf2c Modules linked in: ---[ end trace 80970faf7a67eb77 ]--- RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883 Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40 RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000 RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340 RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f FS: 00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet edumazet@google.com Cc: stable stable@vger.kernel.org Reported-by: syzbot syzkaller@googlegroups.com Link: https://lore.kernel.org/r/20200210190721.200418-1-edumazet@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/vt/vt_ioctl.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index d4c1b100f3b6d..e8efb270dc8f9 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -879,15 +879,20 @@ int vt_ioctl(struct tty_struct *tty, return -EINVAL;
for (i = 0; i < MAX_NR_CONSOLES; i++) { + struct vc_data *vcp; + if (!vc_cons[i].d) continue; console_lock(); - if (v.v_vlin) - vc_cons[i].d->vc_scan_lines = v.v_vlin; - if (v.v_clin) - vc_cons[i].d->vc_font.height = v.v_clin; - vc_cons[i].d->vc_resize_user = 1; - vc_resize(vc_cons[i].d, v.v_cols, v.v_rows); + vcp = vc_cons[i].d; + if (vcp) { + if (v.v_vlin) + vcp->vc_scan_lines = v.v_vlin; + if (v.v_clin) + vcp->vc_font.height = v.v_clin; + vcp->vc_resize_user = 1; + vc_resize(vcp, v.v_cols, v.v_rows); + } console_unlock(); } break;
From: Michael Neuling mikey@neuling.org
[ Upstream commit 92fb8690bd04cb421d987d246deac60eef85d272 ]
Unfortunately userspace can construct a sigcontext which enables suspend. Thus userspace can force Linux into a path where trechkpt is executed.
This patch blocks this from happening on POWER9 by sanity checking sigcontexts passed in.
ptrace doesn't have this problem as only MSR SE and BE can be changed via ptrace.
This patch also adds a number of WARN_ON()s in case we ever enter suspend when we shouldn't. This should not happen, but if it does the symptoms are soft lockup warnings which are not obviously TM related, so the WARN_ON()s should make it obvious what's happening.
Signed-off-by: Michael Neuling mikey@neuling.org Signed-off-by: Cyril Bur cyrilbur@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/process.c | 2 ++ arch/powerpc/kernel/signal_32.c | 4 ++++ arch/powerpc/kernel/signal_64.c | 5 +++++ 3 files changed, 11 insertions(+)
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 54c95e7c74cce..1a08c43a51f8c 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -890,6 +890,8 @@ static inline void tm_reclaim_task(struct task_struct *tsk) if (!MSR_TM_ACTIVE(thr->regs->msr)) goto out_and_saveregs;
+ WARN_ON(tm_suspend_disabled); + TM_DEBUG("--- tm_reclaim on pid %d (NIP=%lx, " "ccr=%lx, msr=%lx, trap=%lx)\n", tsk->pid, thr->regs->nip, diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index a378b1e80a1aa..bec09db6981ea 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -519,6 +519,8 @@ static int save_tm_user_regs(struct pt_regs *regs, { unsigned long msr = regs->msr;
+ WARN_ON(tm_suspend_disabled); + /* Remove TM bits from thread's MSR. The MSR in the sigcontext * just indicates to userland that we were doing a transaction, but we * don't want to return in transactional state. This also ensures @@ -769,6 +771,8 @@ static long restore_tm_user_regs(struct pt_regs *regs, int i; #endif
+ if (tm_suspend_disabled) + return 1; /* * restore general registers but not including MSR or SOFTE. Also * take care of keeping r2 (TLS) intact if not a signal. diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index f4c46b0ec611a..9d8fd0c74b314 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -214,6 +214,8 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc,
BUG_ON(!MSR_TM_ACTIVE(regs->msr));
+ WARN_ON(tm_suspend_disabled); + /* Remove TM bits from thread's MSR. The MSR in the sigcontext * just indicates to userland that we were doing a transaction, but we * don't want to return in transactional state. This also ensures @@ -430,6 +432,9 @@ static long restore_tm_sigcontexts(struct task_struct *tsk,
BUG_ON(tsk != current);
+ if (tm_suspend_disabled) + return -EINVAL; + /* copy the GPRs */ err |= __copy_from_user(regs->gpr, tm_sc->gp_regs, sizeof(regs->gpr)); err |= __copy_from_user(&tsk->thread.ckpt_regs, sc->gp_regs,
From: Gustavo Romero gromero@linux.vnet.ibm.com
[ Upstream commit 1c200e63d055ec0125e44a5e386b9b78aada7eb3 ]
Currently it's possible that a thread on PPC64 LE has its endianness flipped inadvertently to Big-Endian resulting in a crash once the process is back from the signal handler.
If giveup_all() is called when regs->msr has the bits MSR.FP and MSR.VEC disabled (and hence MSR.VSX disabled too) it returns without calling check_if_tm_restore_required() which copies regs->msr to ckpt_regs->msr if the process caught a signal whilst in transactional mode. Then once in setup_tm_sigcontexts() MSR from ckpt_regs.msr is used, but since check_if_tm_restore_required() was not called previuosly, gp_regs[PT_MSR] gets a copy of invalid MSR bits as MSR in ckpt_regs was not updated from regs->msr and so is zeroed. Later when leaving the signal handler once in sys_rt_sigreturn() the TS bits of gp_regs[PT_MSR] are checked to determine if restore_tm_sigcontexts() must be called to pull in the correct MSR state into the user context. Because TS bits are zeroed restore_tm_sigcontexts() is never called and MSR restored from the user context on returning from the signal handler has the MSR.LE (the endianness bit) forced to zero (Big-Endian). That leads, for instance, to 'nop' being treated as an illegal instruction in the following sequence:
tbegin. beq 1f trap tend. 1: nop
on PPC64 LE machines and the process dies just after returning from the signal handler.
PPC64 BE is also affected but in a subtle way since forcing Big-Endian on a BE machine does not change the endianness.
This commit fixes the issue described above by ensuring that once in setup_tm_sigcontexts() the MSR used is from regs->msr instead of from ckpt_regs->msr and by ensuring that we pull in only the MSR.FP, MSR.VEC, and MSR.VSX bits from ckpt_regs->msr.
The fix was tested both on LE and BE machines and no regression regarding the powerpc/tm selftests was observed.
Signed-off-by: Gustavo Romero gromero@linux.vnet.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/signal_64.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 9d8fd0c74b314..459c4adf47841 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -207,7 +207,7 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc, elf_vrreg_t __user *tm_v_regs = sigcontext_vmx_regs(tm_sc); #endif struct pt_regs *regs = tsk->thread.regs; - unsigned long msr = tsk->thread.ckpt_regs.msr; + unsigned long msr = tsk->thread.regs->msr; long err = 0;
BUG_ON(tsk != current); @@ -216,6 +216,12 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc,
WARN_ON(tm_suspend_disabled);
+ /* Restore checkpointed FP, VEC, and VSX bits from ckpt_regs as + * it contains the correct FP, VEC, VSX state after we treclaimed + * the transaction and giveup_all() was called on reclaiming. + */ + msr |= tsk->thread.ckpt_regs.msr & (MSR_FP | MSR_VEC | MSR_VSX); + /* Remove TM bits from thread's MSR. The MSR in the sigcontext * just indicates to userland that we were doing a transaction, but we * don't want to return in transactional state. This also ensures
From: Gustavo Luiz Duarte gustavold@linux.ibm.com
[ Upstream commit 2464cc4c345699adea52c7aef75707207cb8a2f6 ]
After a treclaim, we expect to be in non-transactional state. If we don't clear the current thread's MSR[TS] before we get preempted, then tm_recheckpoint_new_task() will recheckpoint and we get rescheduled in suspended transaction state.
When handling a signal caught in transactional state, handle_rt_signal64() calls get_tm_stackpointer() that treclaims the transaction using tm_reclaim_current() but without clearing the thread's MSR[TS]. This can cause the TM Bad Thing exception below if later we pagefault and get preempted trying to access the user's sigframe, using __put_user(). Afterwards, when we are rescheduled back into do_page_fault() (but now in suspended state since the thread's MSR[TS] was not cleared), upon executing 'rfid' after completion of the page fault handling, the exception is raised because a transition from suspended to non-transactional state is invalid.
Unexpected TM Bad Thing exception at c00000000000de44 (msr 0x8000000302a03031) tm_scratch=800000010280b033 Oops: Unrecoverable exception, sig: 6 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 25 PID: 15547 Comm: a.out Not tainted 5.4.0-rc2 #32 NIP: c00000000000de44 LR: c000000000034728 CTR: 0000000000000000 REGS: c00000003fe7bd70 TRAP: 0700 Not tainted (5.4.0-rc2) MSR: 8000000302a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[SE]> CR: 44000884 XER: 00000000 CFAR: c00000000000dda4 IRQMASK: 0 PACATMSCRATCH: 800000010280b033 GPR00: c000000000034728 c000000f65a17c80 c000000001662800 00007fffacf3fd78 GPR04: 0000000000001000 0000000000001000 0000000000000000 c000000f611f8af0 GPR08: 0000000000000000 0000000078006001 0000000000000000 000c000000000000 GPR12: c000000f611f84b0 c00000003ffcb200 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000f611f8140 GPR24: 0000000000000000 00007fffacf3fd68 c000000f65a17d90 c000000f611f7800 GPR28: c000000f65a17e90 c000000f65a17e90 c000000001685e18 00007fffacf3f000 NIP [c00000000000de44] fast_exception_return+0xf4/0x1b0 LR [c000000000034728] handle_rt_signal64+0x78/0xc50 Call Trace: [c000000f65a17c80] [c000000000034710] handle_rt_signal64+0x60/0xc50 (unreliable) [c000000f65a17d30] [c000000000023640] do_notify_resume+0x330/0x460 [c000000f65a17e20] [c00000000000dcc4] ret_from_except_lite+0x70/0x74 Instruction dump: 7c4ff120 e8410170 7c5a03a6 38400000 f8410060 e8010070 e8410080 e8610088 60000000 60000000 e8810090 e8210078 <4c000024> 48000000 e8610178 88ed0989 ---[ end trace 93094aa44b442f87 ]---
The simplified sequence of events that triggers the above exception is:
... # userspace in NON-TRANSACTIONAL state tbegin # userspace in TRANSACTIONAL state signal delivery # kernelspace in SUSPENDED state handle_rt_signal64() get_tm_stackpointer() treclaim # kernelspace in NON-TRANSACTIONAL state __put_user() page fault happens. We will never get back here because of the TM Bad Thing exception.
page fault handling kicks in and we voluntarily preempt ourselves do_page_fault() __schedule() __switch_to(other_task)
our task is rescheduled and we recheckpoint because the thread's MSR[TS] was not cleared __switch_to(our_task) switch_to_tm() tm_recheckpoint_new_task() trechkpt # kernelspace in SUSPENDED state
The page fault handling resumes, but now we are in suspended transaction state do_page_fault() completes rfid <----- trying to get back where the page fault happened (we were non-transactional back then) TM Bad Thing # illegal transition from suspended to non-transactional
This patch fixes that issue by clearing the current thread's MSR[TS] just after treclaim in get_tm_stackpointer() so that we stay in non-transactional state in case we are preempted. In order to make treclaim and clearing the thread's MSR[TS] atomic from a preemption perspective when CONFIG_PREEMPT is set, preempt_disable/enable() is used. It's also necessary to save the previous value of the thread's MSR before get_tm_stackpointer() is called so that it can be exposed to the signal handler later in setup_tm_sigcontexts() to inform the userspace MSR at the moment of the signal delivery.
Found with tm-signal-context-force-tm kernel selftest.
Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9 Signed-off-by: Gustavo Luiz Duarte gustavold@linux.ibm.com Acked-by: Michael Neuling mikey@neuling.org Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20200211033831.11165-1-gustavold@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/signal.c | 17 +++++++++++++++-- arch/powerpc/kernel/signal_32.c | 28 ++++++++++++++-------------- arch/powerpc/kernel/signal_64.c | 22 ++++++++++------------ 3 files changed, 39 insertions(+), 28 deletions(-)
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 3600c0d99ae94..2dbb066d95194 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -189,14 +189,27 @@ unsigned long get_tm_stackpointer(struct task_struct *tsk) * normal/non-checkpointed stack pointer. */
+ unsigned long ret = tsk->thread.regs->gpr[1]; + #ifdef CONFIG_PPC_TRANSACTIONAL_MEM BUG_ON(tsk != current);
if (MSR_TM_ACTIVE(tsk->thread.regs->msr)) { + preempt_disable(); tm_reclaim_current(TM_CAUSE_SIGNAL); if (MSR_TM_TRANSACTIONAL(tsk->thread.regs->msr)) - return tsk->thread.ckpt_regs.gpr[1]; + ret = tsk->thread.ckpt_regs.gpr[1]; + + /* + * If we treclaim, we must clear the current thread's TM bits + * before re-enabling preemption. Otherwise we might be + * preempted and have the live MSR[TS] changed behind our back + * (tm_recheckpoint_new_task() would recheckpoint). Besides, we + * enter the signal handler in non-transactional state. + */ + tsk->thread.regs->msr &= ~MSR_TS_MASK; + preempt_enable(); } #endif - return tsk->thread.regs->gpr[1]; + return ret; } diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index bec09db6981ea..1bf5eb9f8405a 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -515,19 +515,11 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, */ static int save_tm_user_regs(struct pt_regs *regs, struct mcontext __user *frame, - struct mcontext __user *tm_frame, int sigret) + struct mcontext __user *tm_frame, int sigret, + unsigned long msr) { - unsigned long msr = regs->msr; - WARN_ON(tm_suspend_disabled);
- /* Remove TM bits from thread's MSR. The MSR in the sigcontext - * just indicates to userland that we were doing a transaction, but we - * don't want to return in transactional state. This also ensures - * that flush_fp_to_thread won't set TIF_RESTORE_TM again. - */ - regs->msr &= ~MSR_TS_MASK; - /* Save both sets of general registers */ if (save_general_regs(¤t->thread.ckpt_regs, frame) || save_general_regs(regs, tm_frame)) @@ -1006,6 +998,10 @@ int handle_rt_signal32(struct ksignal *ksig, sigset_t *oldset, int sigret; unsigned long tramp; struct pt_regs *regs = tsk->thread.regs; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + /* Save the thread's msr before get_tm_stackpointer() changes it */ + unsigned long msr = regs->msr; +#endif
BUG_ON(tsk != current);
@@ -1038,13 +1034,13 @@ int handle_rt_signal32(struct ksignal *ksig, sigset_t *oldset,
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM tm_frame = &rt_sf->uc_transact.uc_mcontext; - if (MSR_TM_ACTIVE(regs->msr)) { + if (MSR_TM_ACTIVE(msr)) { if (__put_user((unsigned long)&rt_sf->uc_transact, &rt_sf->uc.uc_link) || __put_user((unsigned long)tm_frame, &rt_sf->uc_transact.uc_regs)) goto badframe; - if (save_tm_user_regs(regs, frame, tm_frame, sigret)) + if (save_tm_user_regs(regs, frame, tm_frame, sigret, msr)) goto badframe; } else @@ -1451,6 +1447,10 @@ int handle_signal32(struct ksignal *ksig, sigset_t *oldset, int sigret; unsigned long tramp; struct pt_regs *regs = tsk->thread.regs; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + /* Save the thread's msr before get_tm_stackpointer() changes it */ + unsigned long msr = regs->msr; +#endif
BUG_ON(tsk != current);
@@ -1484,9 +1484,9 @@ int handle_signal32(struct ksignal *ksig, sigset_t *oldset,
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM tm_mctx = &frame->mctx_transact; - if (MSR_TM_ACTIVE(regs->msr)) { + if (MSR_TM_ACTIVE(msr)) { if (save_tm_user_regs(regs, &frame->mctx, &frame->mctx_transact, - sigret)) + sigret, msr)) goto badframe; } else diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 459c4adf47841..bde4c1b9a0ba8 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -192,7 +192,8 @@ static long setup_sigcontext(struct sigcontext __user *sc, static long setup_tm_sigcontexts(struct sigcontext __user *sc, struct sigcontext __user *tm_sc, struct task_struct *tsk, - int signr, sigset_t *set, unsigned long handler) + int signr, sigset_t *set, unsigned long handler, + unsigned long msr) { /* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the * process never used altivec yet (MSR_VEC is zero in pt_regs of @@ -207,12 +208,11 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc, elf_vrreg_t __user *tm_v_regs = sigcontext_vmx_regs(tm_sc); #endif struct pt_regs *regs = tsk->thread.regs; - unsigned long msr = tsk->thread.regs->msr; long err = 0;
BUG_ON(tsk != current);
- BUG_ON(!MSR_TM_ACTIVE(regs->msr)); + BUG_ON(!MSR_TM_ACTIVE(msr));
WARN_ON(tm_suspend_disabled);
@@ -222,13 +222,6 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc, */ msr |= tsk->thread.ckpt_regs.msr & (MSR_FP | MSR_VEC | MSR_VSX);
- /* Remove TM bits from thread's MSR. The MSR in the sigcontext - * just indicates to userland that we were doing a transaction, but we - * don't want to return in transactional state. This also ensures - * that flush_fp_to_thread won't set TIF_RESTORE_TM again. - */ - regs->msr &= ~MSR_TS_MASK; - #ifdef CONFIG_ALTIVEC err |= __put_user(v_regs, &sc->v_regs); err |= __put_user(tm_v_regs, &tm_sc->v_regs); @@ -805,6 +798,10 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set, unsigned long newsp = 0; long err = 0; struct pt_regs *regs = tsk->thread.regs; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + /* Save the thread's msr before get_tm_stackpointer() changes it */ + unsigned long msr = regs->msr; +#endif
BUG_ON(tsk != current);
@@ -822,7 +819,7 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set, err |= __put_user(0, &frame->uc.uc_flags); err |= __save_altstack(&frame->uc.uc_stack, regs->gpr[1]); #ifdef CONFIG_PPC_TRANSACTIONAL_MEM - if (MSR_TM_ACTIVE(regs->msr)) { + if (MSR_TM_ACTIVE(msr)) { /* The ucontext_t passed to userland points to the second * ucontext_t (for transactional state) with its uc_link ptr. */ @@ -830,7 +827,8 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set, err |= setup_tm_sigcontexts(&frame->uc.uc_mcontext, &frame->uc_transact.uc_mcontext, tsk, ksig->sig, NULL, - (unsigned long)ksig->ka.sa.sa_handler); + (unsigned long)ksig->ka.sa.sa_handler, + msr); } else #endif {
From: Miles Chen miles.chen@mediatek.com
[ Upstream commit ee050dc83bc326ad5ef8ee93bca344819371e7a5 ]
Replace "depot_save_stack" with "stack_depot_save" in code comments because depot_save_stack() was replaced in commit c0cfc337264c ("lib/stackdepot: Provide functions which operate on plain storage arrays") and removed in commit 56d8f079c51a ("lib/stackdepot: Remove obsolete functions")
Signed-off-by: Miles Chen miles.chen@mediatek.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Link: https://lkml.kernel.org/r/20190815113246.18478-1-miles.chen@mediatek.com Signed-off-by: Sasha Levin sashal@kernel.org --- lib/stackdepot.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/lib/stackdepot.c b/lib/stackdepot.c index f87d138e96724..1724cb0d6283f 100644 --- a/lib/stackdepot.c +++ b/lib/stackdepot.c @@ -96,7 +96,7 @@ static bool init_stack_slab(void **prealloc) stack_slabs[depot_index + 1] = *prealloc; /* * This smp_store_release pairs with smp_load_acquire() from - * |next_slab_inited| above and in depot_save_stack(). + * |next_slab_inited| above and in stack_depot_save(). */ smp_store_release(&next_slab_inited, 1); } @@ -123,7 +123,7 @@ static struct stack_record *depot_alloc_stack(unsigned long *entries, int size, depot_offset = 0; /* * smp_store_release() here pairs with smp_load_acquire() from - * |next_slab_inited| in depot_save_stack() and + * |next_slab_inited| in stack_depot_save() and * init_stack_slab(). */ if (depot_index + 1 < STACK_ALLOC_MAX_SLABS)
From: Alexander Potapenko glider@google.com
[ Upstream commit 305e519ce48e935702c32241f07d393c3c8fed3e ]
Walter Wu has reported a potential case in which init_stack_slab() is called after stack_slabs[STACK_ALLOC_MAX_SLABS - 1] has already been initialized. In that case init_stack_slab() will overwrite stack_slabs[STACK_ALLOC_MAX_SLABS], which may result in a memory corruption.
Link: http://lkml.kernel.org/r/20200218102950.260263-1-glider@google.com Fixes: cd11016e5f521 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Alexander Potapenko glider@google.com Reported-by: Walter Wu walter-zh.wu@mediatek.com Cc: Dmitry Vyukov dvyukov@google.com Cc: Matthias Brugger matthias.bgg@gmail.com Cc: Thomas Gleixner tglx@linutronix.de Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Kate Stewart kstewart@linuxfoundation.org Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- lib/stackdepot.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/lib/stackdepot.c b/lib/stackdepot.c index 1724cb0d6283f..54fe55b6bbc0a 100644 --- a/lib/stackdepot.c +++ b/lib/stackdepot.c @@ -92,15 +92,19 @@ static bool init_stack_slab(void **prealloc) return true; if (stack_slabs[depot_index] == NULL) { stack_slabs[depot_index] = *prealloc; + *prealloc = NULL; } else { - stack_slabs[depot_index + 1] = *prealloc; + /* If this is the last depot slab, do not touch the next one. */ + if (depot_index + 1 < STACK_ALLOC_MAX_SLABS) { + stack_slabs[depot_index + 1] = *prealloc; + *prealloc = NULL; + } /* * This smp_store_release pairs with smp_load_acquire() from * |next_slab_inited| above and in stack_depot_save(). */ smp_store_release(&next_slab_inited, 1); } - *prealloc = NULL; return true; }
From: Paolo Bonzini pbonzini@redhat.com
[ Upstream commit 07721feee46b4b248402133228235318199b05ec ]
vmx_check_intercept is not yet fully implemented. To avoid emulating instructions disallowed by the L1 hypervisor, refuse to emulate instructions by default.
Cc: stable@vger.kernel.org [Made commit, added commit msg - Oliver] Signed-off-by: Oliver Upton oupton@google.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kvm/vmx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -11354,7 +11354,7 @@ static int vmx_check_intercept(struct kv }
/* TODO: check more intercepts... */ - return X86EMUL_CONTINUE; + return X86EMUL_UNHANDLEABLE; }
#ifdef CONFIG_X86_64
From: Jann Horn jannh@google.com
[ Upstream commit 6ab405114b0b229151ef06f4e31c7834dd09d0c0 ]
Check whether inputs from userspace are too long (explicit length field too big or string not null-terminated) to avoid out-of-bounds reads.
As far as I can tell, this can at worst lead to very limited kernel heap memory disclosure or oopses.
This bug can be triggered by an unprivileged user even if the xt_bpf module is not loaded: iptables is available in network namespaces, and the xt_bpf module can be autoloaded.
Triggering the bug with a classic BPF filter with fake length 0x1000 causes the following KASAN report:
================================================================== BUG: KASAN: slab-out-of-bounds in bpf_prog_create+0x84/0xf0 Read of size 32768 at addr ffff8801eff2c494 by task test/4627
CPU: 0 PID: 4627 Comm: test Not tainted 4.15.0-rc1+ #1 [...] Call Trace: dump_stack+0x5c/0x85 print_address_description+0x6a/0x260 kasan_report+0x254/0x370 ? bpf_prog_create+0x84/0xf0 memcpy+0x1f/0x50 bpf_prog_create+0x84/0xf0 bpf_mt_check+0x90/0xd6 [xt_bpf] [...] Allocated by task 4627: kasan_kmalloc+0xa0/0xd0 __kmalloc_node+0x47/0x60 xt_alloc_table_info+0x41/0x70 [x_tables] [...] The buggy address belongs to the object at ffff8801eff2c3c0 which belongs to the cache kmalloc-2048 of size 2048 The buggy address is located 212 bytes inside of 2048-byte region [ffff8801eff2c3c0, ffff8801eff2cbc0) [...] ==================================================================
Fixes: e6f30c731718 ("netfilter: x_tables: add xt_bpf match") Signed-off-by: Jann Horn jannh@google.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Zubin Mithra zsm@chromium.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/xt_bpf.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/net/netfilter/xt_bpf.c b/net/netfilter/xt_bpf.c index dffee9d47ec4b..7b993f25aab92 100644 --- a/net/netfilter/xt_bpf.c +++ b/net/netfilter/xt_bpf.c @@ -25,6 +25,9 @@ static int bpf_mt_check(const struct xt_mtchk_param *par) struct xt_bpf_info *info = par->matchinfo; struct sock_fprog_kern program;
+ if (info->bpf_program_num_elem > XT_BPF_MAX_NUM_INSTR) + return -EINVAL; + program.len = info->bpf_program_num_elem; program.filter = info->bpf_program;
From: Qian Cai cai@lca.pw
commit 35df4299a6487f323b0aca120ea3f485dfee2ae3 upstream.
EXT4_I(inode)->i_disksize could be accessed concurrently as noticed by KCSAN,
BUG: KCSAN: data-race in ext4_write_end [ext4] / ext4_writepages [ext4]
write to 0xffff91c6713b00f8 of 8 bytes by task 49268 on cpu 127: ext4_write_end+0x4e3/0x750 [ext4] ext4_update_i_disksize at fs/ext4/ext4.h:3032 (inlined by) ext4_update_inode_size at fs/ext4/ext4.h:3046 (inlined by) ext4_write_end at fs/ext4/inode.c:1287 generic_perform_write+0x208/0x2a0 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe
read to 0xffff91c6713b00f8 of 8 bytes by task 24872 on cpu 37: ext4_writepages+0x10ac/0x1d00 [ext4] mpage_map_and_submit_extent at fs/ext4/inode.c:2468 (inlined by) ext4_writepages at fs/ext4/inode.c:2772 do_writepages+0x5e/0x130 __writeback_single_inode+0xeb/0xb20 writeback_sb_inodes+0x429/0x900 __writeback_inodes_wb+0xc4/0x150 wb_writeback+0x4bd/0x870 wb_workfn+0x6b4/0x960 process_one_work+0x54c/0xbe0 worker_thread+0x80/0x650 kthread+0x1e0/0x200 ret_from_fork+0x27/0x50
Reported by Kernel Concurrency Sanitizer on: CPU: 37 PID: 24872 Comm: kworker/u261:2 Tainted: G W O L 5.5.0-next-20200204+ #5 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Workqueue: writeback wb_workfn (flush-7:0)
Since only the read is operating as lockless (outside of the "i_data_sem"), load tearing could introduce a logic bug. Fix it by adding READ_ONCE() for the read and WRITE_ONCE() for the write.
Signed-off-by: Qian Cai cai@lca.pw Link: https://lore.kernel.org/r/1581085751-31793-1-git-send-email-cai@lca.pw Signed-off-by: Theodore Ts'o tytso@mit.edu Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/ext4/ext4.h | 2 +- fs/ext4/inode.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
--- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -2851,7 +2851,7 @@ static inline void ext4_update_i_disksiz !inode_is_locked(inode)); down_write(&EXT4_I(inode)->i_data_sem); if (newsize > EXT4_I(inode)->i_disksize) - EXT4_I(inode)->i_disksize = newsize; + WRITE_ONCE(EXT4_I(inode)->i_disksize, newsize); up_write(&EXT4_I(inode)->i_data_sem); }
--- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2475,7 +2475,7 @@ update_disksize: * truncate are avoided by checking i_size under i_data_sem. */ disksize = ((loff_t)mpd->first_page) << PAGE_SHIFT; - if (disksize > EXT4_I(inode)->i_disksize) { + if (disksize > READ_ONCE(EXT4_I(inode)->i_disksize)) { int err2; loff_t i_size;
From: Shijie Luo luoshijie1@huawei.com
commit 9424ef56e13a1f14c57ea161eed3ecfdc7b2770e upstream.
We tested a soft lockup problem in linux 4.19 which could also be found in linux 5.x.
When dir inode takes up a large number of blocks, and if the directory is growing when we are searching, it's possible the restart branch could be called many times, and the do while loop could hold cpu a long time.
Here is the call trace in linux 4.19.
[ 473.756186] Call trace: [ 473.756196] dump_backtrace+0x0/0x198 [ 473.756199] show_stack+0x24/0x30 [ 473.756205] dump_stack+0xa4/0xcc [ 473.756210] watchdog_timer_fn+0x300/0x3e8 [ 473.756215] __hrtimer_run_queues+0x114/0x358 [ 473.756217] hrtimer_interrupt+0x104/0x2d8 [ 473.756222] arch_timer_handler_virt+0x38/0x58 [ 473.756226] handle_percpu_devid_irq+0x90/0x248 [ 473.756231] generic_handle_irq+0x34/0x50 [ 473.756234] __handle_domain_irq+0x68/0xc0 [ 473.756236] gic_handle_irq+0x6c/0x150 [ 473.756238] el1_irq+0xb8/0x140 [ 473.756286] ext4_es_lookup_extent+0xdc/0x258 [ext4] [ 473.756310] ext4_map_blocks+0x64/0x5c0 [ext4] [ 473.756333] ext4_getblk+0x6c/0x1d0 [ext4] [ 473.756356] ext4_bread_batch+0x7c/0x1f8 [ext4] [ 473.756379] ext4_find_entry+0x124/0x3f8 [ext4] [ 473.756402] ext4_lookup+0x8c/0x258 [ext4] [ 473.756407] __lookup_hash+0x8c/0xe8 [ 473.756411] filename_create+0xa0/0x170 [ 473.756413] do_mkdirat+0x6c/0x140 [ 473.756415] __arm64_sys_mkdirat+0x28/0x38 [ 473.756419] el0_svc_common+0x78/0x130 [ 473.756421] el0_svc_handler+0x38/0x78 [ 473.756423] el0_svc+0x8/0xc [ 485.755156] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [tmp:5149]
Add cond_resched() to avoid soft lockup and to provide a better system responding.
Link: https://lore.kernel.org/r/20200215080206.13293-1-luoshijie1@huawei.com Signed-off-by: Shijie Luo luoshijie1@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Reviewed-by: Jan Kara jack@suse.cz Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/ext4/namei.c | 1 + 1 file changed, 1 insertion(+)
--- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -1445,6 +1445,7 @@ restart: /* * We deal with the read-ahead logic here. */ + cond_resched(); if (ra_ptr >= ra_max) { /* Refill the readahead buffer */ ra_ptr = 0;
From: Jan Kara jack@suse.cz
commit 9db176bceb5c5df4990486709da386edadc6bd1d upstream.
When CONFIG_QFMT_V2 is configured as a module, the test in ext4_feature_set_ok() fails and so mount of filesystems with quota or project features fails. Fix the test to use IS_ENABLED macro which works properly even for modules.
Link: https://lore.kernel.org/r/20200221100835.9332-1-jack@suse.cz Fixes: d65d87a07476 ("ext4: improve explanation of a mount failure caused by a misconfigured kernel") Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Theodore Ts'o tytso@mit.edu Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/ext4/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2743,7 +2743,7 @@ static int ext4_feature_set_ok(struct su return 0; }
-#if !defined(CONFIG_QUOTA) || !defined(CONFIG_QFMT_V2) +#if !IS_ENABLED(CONFIG_QUOTA) || !IS_ENABLED(CONFIG_QFMT_V2) if (!readonly && (ext4_has_feature_quota(sb) || ext4_has_feature_project(sb))) { ext4_msg(sb, KERN_ERR,
From: Eric Biggers ebiggers@google.com
commit bbd55937de8f2754adc5792b0f8e5ff7d9c0420e upstream.
In preparation for making s_journal_flag_rwsem synchronize ext4_writepages() with changes to both the EXTENTS and JOURNAL_DATA flags (rather than just JOURNAL_DATA as it does currently), rename it to s_writepages_rwsem.
Link: https://lore.kernel.org/r/20200219183047.47417-2-ebiggers@kernel.org Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Theodore Ts'o tytso@mit.edu Reviewed-by: Jan Kara jack@suse.cz Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/ext4/ext4.h | 2 +- fs/ext4/inode.c | 10 +++++----- fs/ext4/super.c | 6 +++--- 3 files changed, 9 insertions(+), 9 deletions(-)
--- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1515,7 +1515,7 @@ struct ext4_sb_info { struct ratelimit_state s_msg_ratelimit_state;
/* Barrier between changing inodes' journal flags and writepages ops. */ - struct percpu_rw_semaphore s_journal_flag_rwsem; + struct percpu_rw_semaphore s_writepages_rwsem;
/* Encryption support */ #ifdef CONFIG_EXT4_FS_ENCRYPTION --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2652,7 +2652,7 @@ static int ext4_writepages(struct addres struct blk_plug plug; bool give_up_on_write = false;
- percpu_down_read(&sbi->s_journal_flag_rwsem); + percpu_down_read(&sbi->s_writepages_rwsem); trace_ext4_writepages(inode, wbc);
if (dax_mapping(mapping)) { @@ -2853,7 +2853,7 @@ retry: out_writepages: trace_ext4_writepages_result(inode, wbc, ret, nr_to_write - wbc->nr_to_write); - percpu_up_read(&sbi->s_journal_flag_rwsem); + percpu_up_read(&sbi->s_writepages_rwsem); return ret; }
@@ -5688,7 +5688,7 @@ int ext4_change_inode_journal_flag(struc } }
- percpu_down_write(&sbi->s_journal_flag_rwsem); + percpu_down_write(&sbi->s_writepages_rwsem); jbd2_journal_lock_updates(journal);
/* @@ -5705,7 +5705,7 @@ int ext4_change_inode_journal_flag(struc err = jbd2_journal_flush(journal); if (err < 0) { jbd2_journal_unlock_updates(journal); - percpu_up_write(&sbi->s_journal_flag_rwsem); + percpu_up_write(&sbi->s_writepages_rwsem); ext4_inode_resume_unlocked_dio(inode); return err; } @@ -5714,7 +5714,7 @@ int ext4_change_inode_journal_flag(struc ext4_set_aops(inode);
jbd2_journal_unlock_updates(journal); - percpu_up_write(&sbi->s_journal_flag_rwsem); + percpu_up_write(&sbi->s_writepages_rwsem);
if (val) up_write(&EXT4_I(inode)->i_mmap_sem); --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -865,7 +865,7 @@ static void ext4_put_super(struct super_ percpu_counter_destroy(&sbi->s_freeinodes_counter); percpu_counter_destroy(&sbi->s_dirs_counter); percpu_counter_destroy(&sbi->s_dirtyclusters_counter); - percpu_free_rwsem(&sbi->s_journal_flag_rwsem); + percpu_free_rwsem(&sbi->s_writepages_rwsem); brelse(sbi->s_sbh); #ifdef CONFIG_QUOTA for (i = 0; i < EXT4_MAXQUOTAS; i++) @@ -4223,7 +4223,7 @@ no_journal: err = percpu_counter_init(&sbi->s_dirtyclusters_counter, 0, GFP_KERNEL); if (!err) - err = percpu_init_rwsem(&sbi->s_journal_flag_rwsem); + err = percpu_init_rwsem(&sbi->s_writepages_rwsem);
if (err) { ext4_msg(sb, KERN_ERR, "insufficient memory"); @@ -4322,7 +4322,7 @@ failed_mount6: percpu_counter_destroy(&sbi->s_freeinodes_counter); percpu_counter_destroy(&sbi->s_dirs_counter); percpu_counter_destroy(&sbi->s_dirtyclusters_counter); - percpu_free_rwsem(&sbi->s_journal_flag_rwsem); + percpu_free_rwsem(&sbi->s_writepages_rwsem); failed_mount5: ext4_ext_release(sb); ext4_release_system_zone(sb);
From: Eric Biggers ebiggers@google.com
commit cb85f4d23f794e24127f3e562cb3b54b0803f456 upstream.
If EXT4_EXTENTS_FL is set on an inode while ext4_writepages() is running on it, the following warning in ext4_add_complete_io() can be hit:
WARNING: CPU: 1 PID: 0 at fs/ext4/page-io.c:234 ext4_put_io_end_defer+0xf0/0x120
Here's a minimal reproducer (not 100% reliable) (root isn't required):
while true; do sync done & while true; do rm -f file touch file chattr -e file echo X >> file chattr +e file done
The problem is that in ext4_writepages(), ext4_should_dioread_nolock() (which only returns true on extent-based files) is checked once to set the number of reserved journal credits, and also again later to select the flags for ext4_map_blocks() and copy the reserved journal handle to ext4_io_end::handle. But if EXT4_EXTENTS_FL is being concurrently set, the first check can see dioread_nolock disabled while the later one can see it enabled, causing the reserved handle to unexpectedly be NULL.
Since changing EXT4_EXTENTS_FL is uncommon, and there may be other races related to doing so as well, fix this by synchronizing changing EXT4_EXTENTS_FL with ext4_writepages() via the existing s_writepages_rwsem (previously called s_journal_flag_rwsem).
This was originally reported by syzbot without a reproducer at https://syzkaller.appspot.com/bug?extid=2202a584a00fffd19fbf, but now that dioread_nolock is the default I also started seeing this when running syzkaller locally.
Link: https://lore.kernel.org/r/20200219183047.47417-3-ebiggers@kernel.org Reported-by: syzbot+2202a584a00fffd19fbf@syzkaller.appspotmail.com Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io") Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Theodore Ts'o tytso@mit.edu Reviewed-by: Jan Kara jack@suse.cz Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/ext4/ext4.h | 5 ++++- fs/ext4/migrate.c | 27 +++++++++++++++++++-------- 2 files changed, 23 insertions(+), 9 deletions(-)
--- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1514,7 +1514,10 @@ struct ext4_sb_info { struct ratelimit_state s_warning_ratelimit_state; struct ratelimit_state s_msg_ratelimit_state;
- /* Barrier between changing inodes' journal flags and writepages ops. */ + /* + * Barrier between writepages ops and changing any inode's JOURNAL_DATA + * or EXTENTS flag. + */ struct percpu_rw_semaphore s_writepages_rwsem;
/* Encryption support */ --- a/fs/ext4/migrate.c +++ b/fs/ext4/migrate.c @@ -434,6 +434,7 @@ static int free_ext_block(handle_t *hand
int ext4_ext_migrate(struct inode *inode) { + struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); handle_t *handle; int retval = 0, i; __le32 *i_data; @@ -458,6 +459,8 @@ int ext4_ext_migrate(struct inode *inode */ return retval;
+ percpu_down_write(&sbi->s_writepages_rwsem); + /* * Worst case we can touch the allocation bitmaps, a bgd * block, and a block to link in the orphan list. We do need @@ -468,7 +471,7 @@ int ext4_ext_migrate(struct inode *inode
if (IS_ERR(handle)) { retval = PTR_ERR(handle); - return retval; + goto out_unlock; } goal = (((inode->i_ino - 1) / EXT4_INODES_PER_GROUP(inode->i_sb)) * EXT4_INODES_PER_GROUP(inode->i_sb)) + 1; @@ -479,7 +482,7 @@ int ext4_ext_migrate(struct inode *inode if (IS_ERR(tmp_inode)) { retval = PTR_ERR(tmp_inode); ext4_journal_stop(handle); - return retval; + goto out_unlock; } i_size_write(tmp_inode, i_size_read(inode)); /* @@ -521,7 +524,7 @@ int ext4_ext_migrate(struct inode *inode */ ext4_orphan_del(NULL, tmp_inode); retval = PTR_ERR(handle); - goto out; + goto out_tmp_inode; }
ei = EXT4_I(inode); @@ -602,10 +605,11 @@ err_out: /* Reset the extent details */ ext4_ext_tree_init(handle, tmp_inode); ext4_journal_stop(handle); -out: +out_tmp_inode: unlock_new_inode(tmp_inode); iput(tmp_inode); - +out_unlock: + percpu_up_write(&sbi->s_writepages_rwsem); return retval; }
@@ -615,7 +619,8 @@ out: int ext4_ind_migrate(struct inode *inode) { struct ext4_extent_header *eh; - struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es; + struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); + struct ext4_super_block *es = sbi->s_es; struct ext4_inode_info *ei = EXT4_I(inode); struct ext4_extent *ex; unsigned int i, len; @@ -639,9 +644,13 @@ int ext4_ind_migrate(struct inode *inode if (test_opt(inode->i_sb, DELALLOC)) ext4_alloc_da_blocks(inode);
+ percpu_down_write(&sbi->s_writepages_rwsem); + handle = ext4_journal_start(inode, EXT4_HT_MIGRATE, 1); - if (IS_ERR(handle)) - return PTR_ERR(handle); + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); + goto out_unlock; + }
down_write(&EXT4_I(inode)->i_data_sem); ret = ext4_ext_check_inode(inode); @@ -676,5 +685,7 @@ int ext4_ind_migrate(struct inode *inode errout: ext4_journal_stop(handle); up_write(&EXT4_I(inode)->i_data_sem); +out_unlock: + percpu_up_write(&sbi->s_writepages_rwsem); return ret; }
From: Oliver Upton oupton@google.com
commit e71237d3ff1abf9f3388337cfebf53b96df2020d upstream.
Checks against the IO bitmap are useful for both instruction emulation and VM-exit reflection. Refactor the IO bitmap checks into a helper function.
Signed-off-by: Oliver Upton oupton@google.com Reviewed-by: Vitaly Kuznetsov vkuznets@redhat.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/x86/kvm/vmx.c | 40 +++++++++++++++++++++++++++------------- 1 file changed, 27 insertions(+), 13 deletions(-)
--- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -4641,6 +4641,26 @@ static bool cs_ss_rpl_check(struct kvm_v (ss.selector & SEGMENT_RPL_MASK)); }
+static bool nested_vmx_check_io_bitmaps(struct kvm_vcpu *vcpu, + unsigned int port, int size); +static bool nested_vmx_exit_handled_io(struct kvm_vcpu *vcpu, + struct vmcs12 *vmcs12) +{ + unsigned long exit_qualification; + unsigned int port; + int size; + + if (!nested_cpu_has(vmcs12, CPU_BASED_USE_IO_BITMAPS)) + return nested_cpu_has(vmcs12, CPU_BASED_UNCOND_IO_EXITING); + + exit_qualification = vmcs_readl(EXIT_QUALIFICATION); + + port = exit_qualification >> 16; + size = (exit_qualification & 7) + 1; + + return nested_vmx_check_io_bitmaps(vcpu, port, size); +} + /* * Check if guest state is valid. Returns true if valid, false if * not. @@ -8026,23 +8046,17 @@ static int (*const kvm_vmx_exit_handlers static const int kvm_vmx_max_exit_handlers = ARRAY_SIZE(kvm_vmx_exit_handlers);
-static bool nested_vmx_exit_handled_io(struct kvm_vcpu *vcpu, - struct vmcs12 *vmcs12) +/* + * Return true if an IO instruction with the specified port and size should cause + * a VM-exit into L1. + */ +bool nested_vmx_check_io_bitmaps(struct kvm_vcpu *vcpu, unsigned int port, + int size) { - unsigned long exit_qualification; + struct vmcs12 *vmcs12 = get_vmcs12(vcpu); gpa_t bitmap, last_bitmap; - unsigned int port; - int size; u8 b;
- if (!nested_cpu_has(vmcs12, CPU_BASED_USE_IO_BITMAPS)) - return nested_cpu_has(vmcs12, CPU_BASED_UNCOND_IO_EXITING); - - exit_qualification = vmcs_readl(EXIT_QUALIFICATION); - - port = exit_qualification >> 16; - size = (exit_qualification & 7) + 1; - last_bitmap = (gpa_t)-1; b = -1;
From: Oliver Upton oupton@google.com
commit 35a571346a94fb93b5b3b6a599675ef3384bc75c upstream.
Consult the 'unconditional IO exiting' and 'use IO bitmaps' VM-execution controls when checking instruction interception. If the 'use IO bitmaps' VM-execution control is 1, check the instruction access against the IO bitmaps to determine if the instruction causes a VM-exit.
Signed-off-by: Oliver Upton oupton@google.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/x86/kvm/vmx.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 52 insertions(+), 7 deletions(-)
--- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -4647,7 +4647,7 @@ static bool nested_vmx_exit_handled_io(s struct vmcs12 *vmcs12) { unsigned long exit_qualification; - unsigned int port; + unsigned short port; int size;
if (!nested_cpu_has(vmcs12, CPU_BASED_USE_IO_BITMAPS)) @@ -11349,6 +11349,39 @@ static void nested_vmx_entry_failure(str to_vmx(vcpu)->nested.sync_shadow_vmcs = true; }
+static int vmx_check_intercept_io(struct kvm_vcpu *vcpu, + struct x86_instruction_info *info) +{ + struct vmcs12 *vmcs12 = get_vmcs12(vcpu); + unsigned short port; + bool intercept; + int size; + + if (info->intercept == x86_intercept_in || + info->intercept == x86_intercept_ins) { + port = info->src_val; + size = info->dst_bytes; + } else { + port = info->dst_val; + size = info->src_bytes; + } + + /* + * If the 'use IO bitmaps' VM-execution control is 0, IO instruction + * VM-exits depend on the 'unconditional IO exiting' VM-execution + * control. + * + * Otherwise, IO instruction VM-exits are controlled by the IO bitmaps. + */ + if (!nested_cpu_has(vmcs12, CPU_BASED_USE_IO_BITMAPS)) + intercept = nested_cpu_has(vmcs12, + CPU_BASED_UNCOND_IO_EXITING); + else + intercept = nested_vmx_check_io_bitmaps(vcpu, port, size); + + return intercept ? X86EMUL_UNHANDLEABLE : X86EMUL_CONTINUE; +} + static int vmx_check_intercept(struct kvm_vcpu *vcpu, struct x86_instruction_info *info, enum x86_intercept_stage stage) @@ -11356,18 +11389,30 @@ static int vmx_check_intercept(struct kv struct vmcs12 *vmcs12 = get_vmcs12(vcpu); struct x86_emulate_ctxt *ctxt = &vcpu->arch.emulate_ctxt;
+ switch (info->intercept) { /* * RDPID causes #UD if disabled through secondary execution controls. * Because it is marked as EmulateOnUD, we need to intercept it here. */ - if (info->intercept == x86_intercept_rdtscp && - !nested_cpu_has2(vmcs12, SECONDARY_EXEC_RDTSCP)) { - ctxt->exception.vector = UD_VECTOR; - ctxt->exception.error_code_valid = false; - return X86EMUL_PROPAGATE_FAULT; - } + case x86_intercept_rdtscp: + if (!nested_cpu_has2(vmcs12, SECONDARY_EXEC_RDTSCP)) { + ctxt->exception.vector = UD_VECTOR; + ctxt->exception.error_code_valid = false; + return X86EMUL_PROPAGATE_FAULT; + } + break; + + case x86_intercept_in: + case x86_intercept_ins: + case x86_intercept_out: + case x86_intercept_outs: + return vmx_check_intercept_io(vcpu, info);
/* TODO: check more intercepts... */ + default: + break; + } + return X86EMUL_UNHANDLEABLE; }
From: Miaohe Lin linmiaohe@huawei.com
commit 23520b2def95205f132e167cf5b25c609975e959 upstream.
When pv_eoi_get_user() fails, 'val' may remain uninitialized and the return value of pv_eoi_get_pending() becomes random. Fix the issue by initializing the variable.
Reviewed-by: Vitaly Kuznetsov vkuznets@redhat.com Signed-off-by: Miaohe Lin linmiaohe@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/x86/kvm/lapic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
--- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -532,9 +532,11 @@ static inline bool pv_eoi_enabled(struct static bool pv_eoi_get_pending(struct kvm_vcpu *vcpu) { u8 val; - if (pv_eoi_get_user(vcpu, &val) < 0) + if (pv_eoi_get_user(vcpu, &val) < 0) { apic_debug("Can't read EOI MSR value: 0x%llx\n", (unsigned long long)vcpu->arch.pv_eoi.msr_val); + return false; + } return val & 0x1; }
From: Filipe Manana fdmanana@suse.com
commit e75fd33b3f744f644061a4f9662bd63f5434f806 upstream.
In btrfs_wait_ordered_range() once we find an ordered extent that has finished with an error we exit the loop and don't wait for any other ordered extents that might be still in progress.
All the users of btrfs_wait_ordered_range() expect that there are no more ordered extents in progress after that function returns. So past fixes such like the ones from the two following commits:
ff612ba7849964 ("btrfs: fix panic during relocation after ENOSPC before writeback happens")
28aeeac1dd3080 ("Btrfs: fix panic when starting bg cache writeout after IO error")
don't work when there are multiple ordered extents in the range.
Fix that by making btrfs_wait_ordered_range() wait for all ordered extents even after it finds one that had an error.
Link: https://github.com/kdave/btrfs-progs/issues/228#issuecomment-569777554 CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo wqu@suse.com Reviewed-by: Josef Bacik josef@toxicpanda.com Signed-off-by: Filipe Manana fdmanana@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/btrfs/ordered-data.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
--- a/fs/btrfs/ordered-data.c +++ b/fs/btrfs/ordered-data.c @@ -837,10 +837,15 @@ int btrfs_wait_ordered_range(struct inod } btrfs_start_ordered_extent(inode, ordered, 1); end = ordered->file_offset; + /* + * If the ordered extent had an error save the error but don't + * exit without waiting first for all other ordered extents in + * the range to complete. + */ if (test_bit(BTRFS_ORDERED_IOERR, &ordered->flags)) ret = -EIO; btrfs_put_ordered_extent(ordered); - if (ret || end == 0 || end == start) + if (end == 0 || end == start) break; end--; }
From: Bart Van Assche bvanassche@acm.org
commit 76261ada16dcc3be610396a46d35acc3efbda682 upstream.
Since commit 04060db41178 introduces soft lockups when toggling network interfaces, revert it.
Link: https://marc.info/?l=target-devel&m=158157054906196 Cc: Rahul Kundu rahul.kundu@chelsio.com Cc: Mike Marciniszyn mike.marciniszyn@intel.com Cc: Sagi Grimberg sagi@grimberg.me Reported-by: Dakshaja Uppalapati dakshaja@chelsio.com Fixes: 04060db41178 ("scsi: RDMA/isert: Fix a recently introduced regression related to logout") Signed-off-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/infiniband/ulp/isert/ib_isert.c | 12 ++++++++++++ drivers/target/iscsi/iscsi_target.c | 6 +++--- 2 files changed, 15 insertions(+), 3 deletions(-)
--- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -2555,6 +2555,17 @@ isert_wait4logout(struct isert_conn *ise } }
+static void +isert_wait4cmds(struct iscsi_conn *conn) +{ + isert_info("iscsi_conn %p\n", conn); + + if (conn->sess) { + target_sess_cmd_list_set_waiting(conn->sess->se_sess); + target_wait_for_sess_cmds(conn->sess->se_sess); + } +} + /** * isert_put_unsol_pending_cmds() - Drop commands waiting for * unsolicitate dataout @@ -2602,6 +2613,7 @@ static void isert_wait_conn(struct iscsi
ib_drain_qp(isert_conn->qp); isert_put_unsol_pending_cmds(conn); + isert_wait4cmds(conn); isert_wait4logout(isert_conn);
queue_work(isert_release_wq, &isert_conn->release_work); --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -4162,6 +4162,9 @@ int iscsit_close_connection( iscsit_stop_nopin_response_timer(conn); iscsit_stop_nopin_timer(conn);
+ if (conn->conn_transport->iscsit_wait_conn) + conn->conn_transport->iscsit_wait_conn(conn); + /* * During Connection recovery drop unacknowledged out of order * commands for this connection, and prepare the other commands @@ -4247,9 +4250,6 @@ int iscsit_close_connection( target_sess_cmd_list_set_waiting(sess->se_sess); target_wait_for_sess_cmds(sess->se_sess);
- if (conn->conn_transport->iscsit_wait_conn) - conn->conn_transport->iscsit_wait_conn(conn); - ahash_request_free(conn->conn_tx_hash); if (conn->conn_rx_hash) { struct crypto_ahash *tfm;
From: Bart Van Assche bvanassche@acm.org
commit 807b9515b7d044cf77df31f1af9d842a76ecd5cb upstream.
Since commit e9d3009cb936 introduced a regression and since the fix for that regression was not perfect, revert this commit.
Link: https://marc.info/?l=target-devel&m=158157054906195 Cc: Rahul Kundu rahul.kundu@chelsio.com Cc: Mike Marciniszyn mike.marciniszyn@intel.com Cc: Sagi Grimberg sagi@grimberg.me Reported-by: Dakshaja Uppalapati dakshaja@chelsio.com Fixes: e9d3009cb936 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session") Signed-off-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/target/iscsi/iscsi_target.c | 10 ++-------- include/scsi/iscsi_proto.h | 1 - 2 files changed, 2 insertions(+), 9 deletions(-)
--- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1168,9 +1168,7 @@ int iscsit_setup_scsi_cmd(struct iscsi_c hdr->cmdsn, be32_to_cpu(hdr->data_length), payload_length, conn->cid);
- if (target_get_sess_cmd(&cmd->se_cmd, true) < 0) - return iscsit_add_reject_cmd(cmd, - ISCSI_REASON_WAITING_FOR_LOGOUT, buf); + target_get_sess_cmd(&cmd->se_cmd, true);
cmd->sense_reason = transport_lookup_cmd_lun(&cmd->se_cmd, scsilun_to_int(&hdr->lun)); @@ -1988,9 +1986,7 @@ iscsit_handle_task_mgt_cmd(struct iscsi_ conn->sess->se_sess, 0, DMA_NONE, TCM_SIMPLE_TAG, cmd->sense_buffer + 2);
- if (target_get_sess_cmd(&cmd->se_cmd, true) < 0) - return iscsit_add_reject_cmd(cmd, - ISCSI_REASON_WAITING_FOR_LOGOUT, buf); + target_get_sess_cmd(&cmd->se_cmd, true);
/* * TASK_REASSIGN for ERL=2 / connection stays inside of @@ -4247,8 +4243,6 @@ int iscsit_close_connection( * must wait until they have completed. */ iscsit_check_conn_usage_count(conn); - target_sess_cmd_list_set_waiting(sess->se_sess); - target_wait_for_sess_cmds(sess->se_sess);
ahash_request_free(conn->conn_tx_hash); if (conn->conn_rx_hash) { --- a/include/scsi/iscsi_proto.h +++ b/include/scsi/iscsi_proto.h @@ -638,7 +638,6 @@ struct iscsi_reject { #define ISCSI_REASON_BOOKMARK_INVALID 9 #define ISCSI_REASON_BOOKMARK_NO_RESOURCES 10 #define ISCSI_REASON_NEGOTIATION_RESET 11 -#define ISCSI_REASON_WAITING_FOR_LOGOUT 12
/* Max. number of Key=Value pairs in a text message */ #define MAX_KEY_VALUE_PAIRS 8192
From: Jack Pham jackp@codeaurora.org
commit c724417baf162bd3e035659e22cdf990cfb0d917 upstream.
SuperSpeedPlus peripherals must report their bMaxPower of the configuration descriptor in units of 8mA as per the USB 3.2 specification. The current switch statement in encode_bMaxPower() only checks for USB_SPEED_SUPER but not USB_SPEED_SUPER_PLUS so the latter falls back to USB 2.0 encoding which uses 2mA units. Replace the switch with a simple if/else.
Fixes: eae5820b852f ("usb: gadget: composite: Write SuperSpeedPlus config descriptors") Signed-off-by: Jack Pham jackp@codeaurora.org Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/gadget/composite.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -437,12 +437,10 @@ static u8 encode_bMaxPower(enum usb_devi val = CONFIG_USB_GADGET_VBUS_DRAW; if (!val) return 0; - switch (speed) { - case USB_SPEED_SUPER: - return DIV_ROUND_UP(val, 8); - default: + if (speed < USB_SPEED_SUPER) return DIV_ROUND_UP(val, 2); - } + else + return DIV_ROUND_UP(val, 8); }
static int config_buf(struct usb_configuration *config,
From: Dan Carpenter dan.carpenter@oracle.com
commit b7db58105b80fa9232719c8329b995b3addfab55 upstream.
When we call kobject_put() and it's the last reference to the kobject then it calls gb_audio_module_release() and frees module. We dereference "module" on the next line which is a use after free.
Fixes: c77f85bbc91a ("greybus: audio: Fix incorrect counting of 'ida'") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Acked-by: Viresh Kumar viresh.kumar@linaro.org Reviewed-by: Vaibhav Agarwal vaibhav.sr@gmail.com Link: https://lore.kernel.org/r/20200205123217.jreendkyxulqsool@kili.mountain Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/staging/greybus/audio_manager.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/greybus/audio_manager.c +++ b/drivers/staging/greybus/audio_manager.c @@ -90,8 +90,8 @@ void gb_audio_manager_remove_all(void)
list_for_each_entry_safe(module, next, &modules_list, list) { list_del(&module->list); - kobject_put(&module->kobj); ida_simple_remove(&module_id, module->id); + kobject_put(&module->kobj); }
is_empty = list_empty(&modules_list);
From: Aditya Pakki pakki001@umn.edu
commit 2c2a7552dd6465e8fde6bc9cccf8d66ed1c1eb72 upstream.
In crypt_scatterlist, if the crypt_stat argument is not set up correctly, the kernel crashes. Instead, by returning an error code upstream, the error is handled safely.
The issue is detected via a static analysis tool written by us.
Fixes: 237fead619984 (ecryptfs: fs/Makefile and fs/Kconfig) Signed-off-by: Aditya Pakki pakki001@umn.edu Signed-off-by: Tyler Hicks code@tyhicks.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/ecryptfs/crypto.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
--- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -339,8 +339,10 @@ static int crypt_scatterlist(struct ecry struct extent_crypt_result ecr; int rc = 0;
- BUG_ON(!crypt_stat || !crypt_stat->tfm - || !(crypt_stat->flags & ECRYPTFS_STRUCT_INITIALIZED)); + if (!crypt_stat || !crypt_stat->tfm + || !(crypt_stat->flags & ECRYPTFS_STRUCT_INITIALIZED)) + return -EINVAL; + if (unlikely(ecryptfs_verbosity > 0)) { ecryptfs_printk(KERN_DEBUG, "Key size [%zd]; key:\n", crypt_stat->key_size);
From: Takashi Iwai tiwai@suse.de
commit dfa9a5efe8b932a84b3b319250aa3ac60c20f876 upstream.
The rawmidi state flags (opened, append, active_sensing) are stored in bit fields that can be potentially racy when concurrently accessed without any locks. Although the current code should be fine, there is also no any real benefit by keeping the bitfields for this kind of short number of members.
This patch changes those bit fields flags to the simple bool fields. There should be no size increase of the snd_rawmidi_substream by this change.
Reported-by: syzbot+576cc007eb9f2c968200@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200214111316.26939-4-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- include/sound/rawmidi.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
--- a/include/sound/rawmidi.h +++ b/include/sound/rawmidi.h @@ -92,9 +92,9 @@ struct snd_rawmidi_substream { struct list_head list; /* list of all substream for given stream */ int stream; /* direction */ int number; /* substream number */ - unsigned int opened: 1, /* open flag */ - append: 1, /* append flag (merge more streams) */ - active_sensing: 1; /* send active sensing when close */ + bool opened; /* open flag */ + bool append; /* append flag (merge more streams) */ + bool active_sensing; /* send active sensing when close */ int use_count; /* use counter (for output) */ size_t bytes; struct snd_rawmidi *rmidi;
From: Takashi Iwai tiwai@suse.de
commit bb51e669fa49feb5904f452b2991b240ef31bc97 upstream.
The queue flags are represented in bit fields and the concurrent access may result in unexpected results. Although the current code should be mostly OK as it's only reading a field while writing other fields as KCSAN reported, it's safer to cover both with a proper spinlock protection.
This patch fixes the possible concurrent read by protecting with q->owner_lock. Also the queue owner field is protected as well since it's the field to be protected by the lock itself.
Reported-by: syzbot+65c6c92d04304d0a8efc@syzkaller.appspotmail.com Reported-by: syzbot+e60ddfa48717579799dd@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200214111316.26939-2-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- sound/core/seq/seq_queue.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-)
--- a/sound/core/seq/seq_queue.c +++ b/sound/core/seq/seq_queue.c @@ -415,6 +415,7 @@ int snd_seq_queue_check_access(int queue int snd_seq_queue_set_owner(int queueid, int client, int locked) { struct snd_seq_queue *q = queueptr(queueid); + unsigned long flags;
if (q == NULL) return -EINVAL; @@ -424,8 +425,10 @@ int snd_seq_queue_set_owner(int queueid, return -EPERM; }
+ spin_lock_irqsave(&q->owner_lock, flags); q->locked = locked ? 1 : 0; q->owner = client; + spin_unlock_irqrestore(&q->owner_lock, flags); queue_access_unlock(q); queuefree(q);
@@ -564,15 +567,17 @@ void snd_seq_queue_client_termination(in unsigned long flags; int i; struct snd_seq_queue *q; + bool matched;
for (i = 0; i < SNDRV_SEQ_MAX_QUEUES; i++) { if ((q = queueptr(i)) == NULL) continue; spin_lock_irqsave(&q->owner_lock, flags); - if (q->owner == client) + matched = (q->owner == client); + if (matched) q->klocked = 1; spin_unlock_irqrestore(&q->owner_lock, flags); - if (q->owner == client) { + if (matched) { if (q->timer->running) snd_seq_timer_stop(q->timer); snd_seq_timer_reset(q->timer); @@ -764,6 +769,8 @@ void snd_seq_info_queues_read(struct snd int i, bpm; struct snd_seq_queue *q; struct snd_seq_timer *tmr; + bool locked; + int owner;
for (i = 0; i < SNDRV_SEQ_MAX_QUEUES; i++) { if ((q = queueptr(i)) == NULL) @@ -775,9 +782,14 @@ void snd_seq_info_queues_read(struct snd else bpm = 0;
+ spin_lock_irq(&q->owner_lock); + locked = q->locked; + owner = q->owner; + spin_unlock_irq(&q->owner_lock); + snd_iprintf(buffer, "queue %d: [%s]\n", q->queue, q->name); - snd_iprintf(buffer, "owned by client : %d\n", q->owner); - snd_iprintf(buffer, "lock status : %s\n", q->locked ? "Locked" : "Free"); + snd_iprintf(buffer, "owned by client : %d\n", owner); + snd_iprintf(buffer, "lock status : %s\n", locked ? "Locked" : "Free"); snd_iprintf(buffer, "queued time events : %d\n", snd_seq_prioq_avail(q->timeq)); snd_iprintf(buffer, "queued tick events : %d\n", snd_seq_prioq_avail(q->tickq)); snd_iprintf(buffer, "timer state : %s\n", tmr->running ? "Running" : "Stopped");
From: Takashi Iwai tiwai@suse.de
commit dc7497795e014d84699c3b8809ed6df35352dd74 upstream.
snd_seq_check_queue() passes the current tick and time of the given queue as a pointer to snd_seq_prioq_cell_out(), but those might be updated concurrently by the seq timer update.
Fix it by retrieving the current tick and time via the proper helper functions at first, and pass those values to snd_seq_prioq_cell_out() later in the loops.
snd_seq_timer_get_cur_time() takes a new argument and adjusts with the current system time only when it's requested so; this update isn't needed for snd_seq_check_queue(), as it's called either from the interrupt handler or right after queuing.
Also, snd_seq_timer_get_cur_tick() is changed to read the value in the spinlock for the concurrency, too.
Reported-by: syzbot+fd5e0eaa1a32999173b2@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200214111316.26939-3-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- sound/core/seq/seq_clientmgr.c | 4 ++-- sound/core/seq/seq_queue.c | 9 ++++++--- sound/core/seq/seq_timer.c | 13 ++++++++++--- sound/core/seq/seq_timer.h | 3 ++- 4 files changed, 20 insertions(+), 9 deletions(-)
--- a/sound/core/seq/seq_clientmgr.c +++ b/sound/core/seq/seq_clientmgr.c @@ -564,7 +564,7 @@ static int update_timestamp_of_queue(str event->queue = queue; event->flags &= ~SNDRV_SEQ_TIME_STAMP_MASK; if (real_time) { - event->time.time = snd_seq_timer_get_cur_time(q->timer); + event->time.time = snd_seq_timer_get_cur_time(q->timer, true); event->flags |= SNDRV_SEQ_TIME_STAMP_REAL; } else { event->time.tick = snd_seq_timer_get_cur_tick(q->timer); @@ -1639,7 +1639,7 @@ static int snd_seq_ioctl_get_queue_statu tmr = queue->timer; status->events = queue->tickq->cells + queue->timeq->cells;
- status->time = snd_seq_timer_get_cur_time(tmr); + status->time = snd_seq_timer_get_cur_time(tmr, true); status->tick = snd_seq_timer_get_cur_tick(tmr);
status->running = tmr->running; --- a/sound/core/seq/seq_queue.c +++ b/sound/core/seq/seq_queue.c @@ -261,6 +261,8 @@ void snd_seq_check_queue(struct snd_seq_ { unsigned long flags; struct snd_seq_event_cell *cell; + snd_seq_tick_time_t cur_tick; + snd_seq_real_time_t cur_time;
if (q == NULL) return; @@ -277,17 +279,18 @@ void snd_seq_check_queue(struct snd_seq_
__again: /* Process tick queue... */ + cur_tick = snd_seq_timer_get_cur_tick(q->timer); for (;;) { - cell = snd_seq_prioq_cell_out(q->tickq, - &q->timer->tick.cur_tick); + cell = snd_seq_prioq_cell_out(q->tickq, &cur_tick); if (!cell) break; snd_seq_dispatch_event(cell, atomic, hop); }
/* Process time queue... */ + cur_time = snd_seq_timer_get_cur_time(q->timer, false); for (;;) { - cell = snd_seq_prioq_cell_out(q->timeq, &q->timer->cur_time); + cell = snd_seq_prioq_cell_out(q->timeq, &cur_time); if (!cell) break; snd_seq_dispatch_event(cell, atomic, hop); --- a/sound/core/seq/seq_timer.c +++ b/sound/core/seq/seq_timer.c @@ -436,14 +436,15 @@ int snd_seq_timer_continue(struct snd_se }
/* return current 'real' time. use timeofday() to get better granularity. */ -snd_seq_real_time_t snd_seq_timer_get_cur_time(struct snd_seq_timer *tmr) +snd_seq_real_time_t snd_seq_timer_get_cur_time(struct snd_seq_timer *tmr, + bool adjust_ktime) { snd_seq_real_time_t cur_time; unsigned long flags;
spin_lock_irqsave(&tmr->lock, flags); cur_time = tmr->cur_time; - if (tmr->running) { + if (adjust_ktime && tmr->running) { struct timespec64 tm;
ktime_get_ts64(&tm); @@ -460,7 +461,13 @@ snd_seq_real_time_t snd_seq_timer_get_cu high PPQ values) */ snd_seq_tick_time_t snd_seq_timer_get_cur_tick(struct snd_seq_timer *tmr) { - return tmr->tick.cur_tick; + snd_seq_tick_time_t cur_tick; + unsigned long flags; + + spin_lock_irqsave(&tmr->lock, flags); + cur_tick = tmr->tick.cur_tick; + spin_unlock_irqrestore(&tmr->lock, flags); + return cur_tick; }
--- a/sound/core/seq/seq_timer.h +++ b/sound/core/seq/seq_timer.h @@ -135,7 +135,8 @@ int snd_seq_timer_set_ppq(struct snd_seq int snd_seq_timer_set_position_tick(struct snd_seq_timer *tmr, snd_seq_tick_time_t position); int snd_seq_timer_set_position_time(struct snd_seq_timer *tmr, snd_seq_real_time_t position); int snd_seq_timer_set_skew(struct snd_seq_timer *tmr, unsigned int skew, unsigned int base); -snd_seq_real_time_t snd_seq_timer_get_cur_time(struct snd_seq_timer *tmr); +snd_seq_real_time_t snd_seq_timer_get_cur_time(struct snd_seq_timer *tmr, + bool adjust_ktime); snd_seq_tick_time_t snd_seq_timer_get_cur_tick(struct snd_seq_timer *tmr);
extern int seq_default_timer_class;
From: Cong Wang xiyou.wangcong@gmail.com
commit 8d0015a7ab76b8b1e89a3e5f5710a6e5103f2dd5 upstream.
The user-specified hashtable size is unbound, this could easily lead to an OOM or a hung task as we hold the global mutex while allocating and initializing the new hashtable.
Add a max value to cap both cfg->size and cfg->max, as suggested by Florian.
Reported-and-tested-by: syzbot+adf6c6c2be1c3a718121@syzkaller.appspotmail.com Signed-off-by: Cong Wang xiyou.wangcong@gmail.com Reviewed-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- net/netfilter/xt_hashlimit.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
--- a/net/netfilter/xt_hashlimit.c +++ b/net/netfilter/xt_hashlimit.c @@ -735,6 +735,8 @@ hashlimit_mt(const struct sk_buff *skb, return hashlimit_mt_common(skb, par, hinfo, &info->cfg, 2); }
+#define HASHLIMIT_MAX_SIZE 1048576 + static int hashlimit_mt_check_common(const struct xt_mtchk_param *par, struct xt_hashlimit_htable **hinfo, struct hashlimit_cfg2 *cfg, @@ -745,6 +747,14 @@ static int hashlimit_mt_check_common(con
if (cfg->gc_interval == 0 || cfg->expire == 0) return -EINVAL; + if (cfg->size > HASHLIMIT_MAX_SIZE) { + cfg->size = HASHLIMIT_MAX_SIZE; + pr_info_ratelimited("size too large, truncated to %u\n", cfg->size); + } + if (cfg->max > HASHLIMIT_MAX_SIZE) { + cfg->max = HASHLIMIT_MAX_SIZE; + pr_info_ratelimited("max too large, truncated to %u\n", cfg->max); + } if (par->family == NFPROTO_IPV4) { if (cfg->srcmask > 32 || cfg->dstmask > 32) return -EINVAL;
From: Prabhakar Kushwaha pkushwaha@marvell.com
commit 10a663a1b15134a5a714aa515e11425a44d4fdf7 upstream.
device_shutdown() called from reboot or power_shutdown expect all devices to be shutdown. Same is true for even ahci pci driver. As no ahci shutdown function is implemented, the ata subsystem always remains alive with DMA & interrupt support. File system related calls should not be honored after device_shutdown().
So defining ahci pci driver shutdown to freeze hardware (mask interrupt, stop DMA engine and free DMA resources).
Signed-off-by: Prabhakar Kushwaha pkushwaha@marvell.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/ata/ahci.c | 7 +++++++ drivers/ata/libata-core.c | 21 +++++++++++++++++++++ include/linux/libata.h | 1 + 3 files changed, 29 insertions(+)
--- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -86,6 +86,7 @@ enum board_ids {
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static void ahci_remove_one(struct pci_dev *dev); +static void ahci_shutdown_one(struct pci_dev *dev); static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, @@ -582,6 +583,7 @@ static struct pci_driver ahci_pci_driver .id_table = ahci_pci_tbl, .probe = ahci_init_one, .remove = ahci_remove_one, + .shutdown = ahci_shutdown_one, .driver = { .pm = &ahci_pci_pm_ops, }, @@ -1775,6 +1777,11 @@ static int ahci_init_one(struct pci_dev return 0; }
+static void ahci_shutdown_one(struct pci_dev *pdev) +{ + ata_pci_shutdown_one(pdev); +} + static void ahci_remove_one(struct pci_dev *pdev) { pm_runtime_get_noresume(&pdev->dev); --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6580,6 +6580,26 @@ void ata_pci_remove_one(struct pci_dev * ata_host_detach(host); }
+void ata_pci_shutdown_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int i; + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ap->pflags |= ATA_PFLAG_FROZEN; + + /* Disable port interrupts */ + if (ap->ops->freeze) + ap->ops->freeze(ap); + + /* Stop the port DMA engines */ + if (ap->ops->port_stop) + ap->ops->port_stop(ap); + } +} + /* move to PCI subsystem */ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) { @@ -7200,6 +7220,7 @@ EXPORT_SYMBOL_GPL(ata_timing_cycle2mode)
#ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); +EXPORT_SYMBOL_GPL(ata_pci_shutdown_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); #ifdef CONFIG_PM EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend); --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1222,6 +1222,7 @@ struct pci_bits { };
extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits); +extern void ata_pci_shutdown_one(struct pci_dev *pdev); extern void ata_pci_remove_one(struct pci_dev *pdev);
#ifdef CONFIG_PM
From: Thomas Gleixner tglx@linutronix.de
commit 8645e56a4ad6dcbf504872db7f14a2f67db88ef2 upstream.
xen_maybe_preempt_hcall() is called from the exception entry point xen_do_hypervisor_callback with interrupts disabled.
_cond_resched() evades the might_sleep() check in cond_resched() which would have caught that and schedule_debug() unfortunately lacks a check for irqs_disabled().
Enable interrupts around the call and use cond_resched() to catch future issues.
Fixes: fdfd811ddde3 ("x86/xen: allow privcmd hypercalls to be preempted") Signed-off-by: Thomas Gleixner tglx@linutronix.de Link: https://lore.kernel.org/r/878skypjrh.fsf@nanos.tec.linutronix.de Reviewed-by: Juergen Gross jgross@suse.com Signed-off-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/xen/preempt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/xen/preempt.c +++ b/drivers/xen/preempt.c @@ -37,7 +37,9 @@ asmlinkage __visible void xen_maybe_pree * cpu. */ __this_cpu_write(xen_in_preemptible_hcall, false); - _cond_resched(); + local_irq_enable(); + cond_resched(); + local_irq_disable(); __this_cpu_write(xen_in_preemptible_hcall, true); } }
From: Nathan Chancellor natechancellor@gmail.com
commit 380324734956c64cd060e1db4304f3117ac15809 upstream.
Clang warns:
In file included from ../arch/s390/purgatory/purgatory.c:10: In file included from ../include/linux/kexec.h:18: In file included from ../include/linux/crash_core.h:6: In file included from ../include/linux/elfcore.h:5: In file included from ../include/linux/user.h:1: In file included from ../arch/s390/include/asm/user.h:11: ../arch/s390/include/asm/page.h:45:6: warning: converting the result of '<<' to a boolean always evaluates to false [-Wtautological-constant-compare] if (PAGE_DEFAULT_KEY) ^ ../arch/s390/include/asm/page.h:23:44: note: expanded from macro 'PAGE_DEFAULT_KEY' #define PAGE_DEFAULT_KEY (PAGE_DEFAULT_ACC << 4) ^ 1 warning generated.
Explicitly compare this against zero to silence the warning as it is intended to be used in a boolean context.
Fixes: de3fa841e429 ("s390/mm: fix compile for PAGE_DEFAULT_KEY != 0") Link: https://github.com/ClangBuiltLinux/linux/issues/860 Link: https://lkml.kernel.org/r/20200214064207.10381-1-natechancellor@gmail.com Acked-by: Christian Borntraeger borntraeger@de.ibm.com Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/s390/include/asm/page.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/s390/include/asm/page.h +++ b/arch/s390/include/asm/page.h @@ -35,7 +35,7 @@ void __storage_key_init_range(unsigned l
static inline void storage_key_init_range(unsigned long start, unsigned long end) { - if (PAGE_DEFAULT_KEY) + if (PAGE_DEFAULT_KEY != 0) __storage_key_init_range(start, end); }
On Thu, Feb 27, 2020 at 02:34:34PM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.9.215 release. There are 165 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 29 Feb 2020 13:21:24 +0000. Anything received after that time might be too late.
Building powerpc:defconfig ... failed -------------- Error log: In file included from include/linux/bug.h:4:0, from include/linux/thread_info.h:11, from include/asm-generic/preempt.h:4, from ./arch/powerpc/include/generated/asm/preempt.h:1, from include/linux/preempt.h:59, from include/linux/spinlock.h:50, from include/linux/seqlock.h:35, from include/linux/time.h:5, from include/uapi/linux/timex.h:56, from include/linux/timex.h:56, from include/linux/sched.h:19, from arch/powerpc/kernel/signal_32.c:20: arch/powerpc/kernel/signal_32.c: In function ‘save_tm_user_regs’: arch/powerpc/kernel/signal_32.c:521:10: error: ‘tm_suspend_disabled’ undeclared
Also affects v4.14.y.
Guenter
On Thu, Feb 27, 2020 at 10:44:31AM -0800, Guenter Roeck wrote:
On Thu, Feb 27, 2020 at 02:34:34PM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.9.215 release. There are 165 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 29 Feb 2020 13:21:24 +0000. Anything received after that time might be too late.
Building powerpc:defconfig ... failed
Error log: In file included from include/linux/bug.h:4:0, from include/linux/thread_info.h:11, from include/asm-generic/preempt.h:4, from ./arch/powerpc/include/generated/asm/preempt.h:1, from include/linux/preempt.h:59, from include/linux/spinlock.h:50, from include/linux/seqlock.h:35, from include/linux/time.h:5, from include/uapi/linux/timex.h:56, from include/linux/timex.h:56, from include/linux/sched.h:19, from arch/powerpc/kernel/signal_32.c:20: arch/powerpc/kernel/signal_32.c: In function ‘save_tm_user_regs’: arch/powerpc/kernel/signal_32.c:521:10: error: ‘tm_suspend_disabled’ undeclared
Also affects v4.14.y.
Thanks for letting me know, I've now dropped 3 powerpc patches from 4.14 and 4.9 and will push out a -rc2 for those trees in a few minutes.
greg k-h
On 27/02/2020 13:34, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.9.215 release. There are 165 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 29 Feb 2020 13:21:24 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.215-rc1... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y and the diffstat can be found below.
thanks,
greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.9: 8 builds: 8 pass, 0 fail 16 boots: 16 pass, 0 fail 24 tests: 24 pass, 0 fail
Linux version: 4.9.215-rc1-gb8e4943d6bee Boards tested: tegra124-jetson-tk1, tegra20-ventana, tegra210-p2371-2180, tegra30-cardhu-a04
Cheers Jon
On Thu, Feb 27, 2020 at 02:34:34PM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.9.215 release. There are 165 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 29 Feb 2020 13:21:24 +0000. Anything received after that time might be too late.
Build results: total: 172 pass: 170 fail: 2 Failed builds: powerpc:defconfig powerpc:allmodconfig Qemu test results: total: 375 pass: 361 fail: 14 Failed tests: ppc64:mac99:ppc64_book3s_defconfig:smp:nvme:rootfs ppc64:pseries:pseries_defconfig:initrd ppc64:pseries:pseries_defconfig:scsi:rootfs ppc64:pseries:pseries_defconfig:usb:rootfs ppc64:pseries:pseries_defconfig:sdhci:mmc:rootfs ppc64:pseries:pseries_defconfig:nvme:rootfs ppc64:pseries:pseries_defconfig:little:initrd ppc64:pseries:pseries_defconfig:little:scsi:rootfs ppc64:pseries:pseries_defconfig:little:usb:rootfs ppc64:pseries:pseries_defconfig:little:scsi[MEGASAS]:rootfs ppc64:pseries:pseries_defconfig:little:scsi[FUSION]:rootfs ppc64:pseries:pseries_defconfig:little:sdhci:mmc:rootfs ppc64:pseries:pseries_defconfig:little:nvme:rootfs ppc64:powernv:powernv_defconfig:initrd
Failures as already reported.
Guenter
On Thu, 27 Feb 2020 at 19:15, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 4.9.215 release. There are 165 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 29 Feb 2020 13:21:24 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.215-rc1... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. No regressions on arm64, arm, x86_64, and i386.
Summary ------------------------------------------------------------------------
kernel: 4.9.215-rc1 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git git branch: linux-4.9.y git commit: b8e4943d6bee55c8a2c077fc7639d0b8e8127e1a git describe: v4.9.214-166-gb8e4943d6bee Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.214-166...
No regressions (compared to build v4.9.214)
No fixes (compared to build v4.9.214)
Ran 26738 total tests in the following environments and test suites.
Environments -------------- - dragonboard-410c - arm64 - hi6220-hikey - arm64 - i386 - juno-r2 - arm64 - qemu_arm - qemu_arm64 - qemu_i386 - qemu_x86_64 - x15 - arm - x86_64
Test Suites ----------- * build * install-android-platform-tools-r2600 * kselftest * libhugetlbfs * linux-log-parser * ltp-cap_bounds-tests * ltp-commands-tests * ltp-containers-tests * ltp-cpuhotplug-tests * ltp-dio-tests * ltp-fcntl-locktests-tests * ltp-filecaps-tests * ltp-fs-tests * ltp-fs_bind-tests * ltp-fs_perms_simple-tests * ltp-fsx-tests * ltp-hugetlb-tests * ltp-io-tests * ltp-ipc-tests * ltp-math-tests * ltp-mm-tests * ltp-nptl-tests * ltp-pty-tests * ltp-sched-tests * ltp-securebits-tests * ltp-syscalls-tests * perf * v4l2-compliance * ltp-cve-tests * network-basic-tests * spectre-meltdown-checker-test * ltp-open-posix-tests * kvm-unit-tests * ltp-cap_bounds-64k-page_size-tests * ltp-cap_bounds-kasan-tests * ltp-commands-64k-page_size-tests * ltp-commands-kasan-tests * ltp-containers-64k-page_size-tests * ltp-containers-kasan-tests * ltp-cpuhotplug-64k-page_size-tests * ltp-cpuhotplug-kasan-tests * ltp-crypto-64k-page_size-tests * ltp-crypto-kasan-tests * ltp-crypto-tests * ltp-cve-64k-page_size-tests * ltp-cve-kasan-tests * ltp-dio-64k-page_size-tests * ltp-dio-kasan-tests * ltp-fcntl-locktests-64k-page_size-tests * ltp-fcntl-locktests-kasan-tests * ltp-filecaps-64k-page_size-tests * ltp-filecaps-kasan-tests * ltp-fs-64k-page_size-tests * ltp-fs-kasan-tests * ltp-fs_bind-64k-page_size-tests * ltp-fs_bind-kasan-tests * ltp-fs_perms_simple-64k-page_size-tests * ltp-fs_perms_simple-kasan-tests * ltp-fsx-64k-page_size-tests * ltp-fsx-kasan-tests * ltp-hugetlb-64k-page_size-tests * ltp-hugetlb-kasan-tests * ltp-io-64k-page_size-tests * ltp-io-kasan-tests * ltp-ipc-64k-page_size-tests * ltp-ipc-kasan-tests * ltp-math-64k-page_size-tests * ltp-math-kasan-tests * ltp-mm-64k-page_size-tests * ltp-mm-kasan-tests * ltp-nptl-64k-page_size-tests * ltp-nptl-kasan-tests * ltp-pty-64k-page_size-tests * ltp-pty-kasan-tests * ltp-sched-64k-page_size-tests * ltp-sched-kasan-tests * ltp-securebits-64k-page_size-tests * ltp-securebits-kasan-tests * ltp-syscalls-64k-page_size-tests * ltp-syscalls-compat-tests * ltp-syscalls-kasan-tests * prep-tmp-disk * ssuite
On 2/27/20 6:34 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.9.215 release. There are 165 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 29 Feb 2020 13:21:24 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.215-rc1... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y and the diffstat can be found below.
thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
thanks, -- Shuah
On Thu, Feb 27, 2020 at 02:34:34PM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.9.215 release. There are 165 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 29 Feb 2020 13:21:24 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.215-rc1...
-rc2 is out to hopefully resolve the powerpc build issues that were found: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.215-rc2...
On 2/28/20 3:59 AM, Greg Kroah-Hartman wrote:
On Thu, Feb 27, 2020 at 02:34:34PM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.9.215 release. There are 165 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 29 Feb 2020 13:21:24 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.215-rc1...
-rc2 is out to hopefully resolve the powerpc build issues that were found: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.215-rc2...
For v4.9.214-163-g176b68c72aeb:
Build results: total: 172 pass: 172 fail: 0 Qemu test results: total: 375 pass: 375 fail: 0
Guenter
linux-stable-mirror@lists.linaro.org