From: Hector Martin marcan@marcan.st

[ Upstream commit f5468beeab1b1adfc63c2717b1f29ef3f49a5fab ]

TX launch polarity needs to be the opposite of RX capture polarity, to generate the right bit slot alignment.

Reviewed-by: Neal Gompa neal@gompa.dev Signed-off-by: Hector Martin marcan@marcan.st Signed-off-by: James Calligeros jcalligeros99@gmail.com Link: https://patch.msgid.link/20250218-apple-codec-changes-v2-28-932760fd7e07@gma... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/tas2764.c | 10 +++++++++- sound/soc/codecs/tas2764.h | 6 ++++++ 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/tas2764.c b/sound/soc/codecs/tas2764.c index 1951bae95b315..273bf4027a6e5 100644 --- a/sound/soc/codecs/tas2764.c +++ b/sound/soc/codecs/tas2764.c @@ -315,7 +315,7 @@ static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) { struct snd_soc_component *component = dai->component; struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component); - u8 tdm_rx_start_slot = 0, asi_cfg_0 = 0, asi_cfg_1 = 0; + u8 tdm_rx_start_slot = 0, asi_cfg_0 = 0, asi_cfg_1 = 0, asi_cfg_4 = 0; int ret;

switch (fmt & SND_SOC_DAIFMT_INV_MASK) { @@ -324,12 +324,14 @@ static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) fallthrough; case SND_SOC_DAIFMT_NB_NF: asi_cfg_1 = TAS2764_TDM_CFG1_RX_RISING; + asi_cfg_4 = TAS2764_TDM_CFG4_TX_FALLING; break; case SND_SOC_DAIFMT_IB_IF: asi_cfg_0 ^= TAS2764_TDM_CFG0_FRAME_START; fallthrough; case SND_SOC_DAIFMT_IB_NF: asi_cfg_1 = TAS2764_TDM_CFG1_RX_FALLING; + asi_cfg_4 = TAS2764_TDM_CFG4_TX_RISING; break; }

@@ -339,6 +341,12 @@ static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) if (ret < 0) return ret;

+ ret = snd_soc_component_update_bits(component, TAS2764_TDM_CFG4, + TAS2764_TDM_CFG4_TX_MASK, + asi_cfg_4); + if (ret < 0) + return ret; + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: asi_cfg_0 ^= TAS2764_TDM_CFG0_FRAME_START; diff --git a/sound/soc/codecs/tas2764.h b/sound/soc/codecs/tas2764.h index b18a637bd9fa3..337bc611bee96 100644 --- a/sound/soc/codecs/tas2764.h +++ b/sound/soc/codecs/tas2764.h @@ -75,6 +75,12 @@ #define TAS2764_TDM_CFG3_RXS_SHIFT 0x4 #define TAS2764_TDM_CFG3_MASK GENMASK(3, 0)

+/* TDM Configuration Reg4 */ +#define TAS2764_TDM_CFG4 TAS2764_REG(0X0, 0x0d) +#define TAS2764_TDM_CFG4_TX_MASK BIT(0) +#define TAS2764_TDM_CFG4_TX_RISING 0x0 +#define TAS2764_TDM_CFG4_TX_FALLING BIT(0) + /* TDM Configuration Reg5 */ #define TAS2764_TDM_CFG5 TAS2764_REG(0X0, 0x0e) #define TAS2764_TDM_CFG5_VSNS_MASK BIT(6)

From: Kan Liang kan.liang@linux.intel.com

[ Upstream commit a26b24b2e21f6222635a95426b9ef9eec63d69b1 ]

Freqency mode is the current default mode of Linux perf. A period of 1 is used as a starting period. The period is auto-adjusted on each tick or an overflow, to meet the frequency target.

The start period of 1 is too low and may trigger some issues:

- Many HWs do not support period 1 well. https://lore.kernel.org/lkml/875xs2oh69.ffs@tglx/

- For an event that occurs frequently, period 1 is too far away from the real period. Lots of samples are generated at the beginning. The distribution of samples may not be even.

- A low starting period for frequently occurring events also challenges virtualization, which has a longer path to handle a PMI.

The limit_period value only checks the minimum acceptable value for HW. It cannot be used to set the start period, because some events may need a very low period. The limit_period cannot be set too high. It doesn't help with the events that occur frequently.

It's hard to find a universal starting period for all events. The idea implemented by this patch is to only give an estimate for the popular HW and HW cache events. For the rest of the events, start from the lowest possible recommended value.

Signed-off-by: Kan Liang kan.liang@linux.intel.com Signed-off-by: Ingo Molnar mingo@kernel.org Cc: Peter Zijlstra peterz@infradead.org Link: https://lore.kernel.org/r/20250117151913.3043942-3-kan.liang@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/events/intel/core.c | 85 ++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+)

diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index b70e1522a27ac..286ae1d9778d1 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -3717,6 +3717,85 @@ static inline bool intel_pmu_has_cap(struct perf_event *event, int idx) return test_bit(idx, (unsigned long *)&intel_cap->capabilities); }

+static u64 intel_pmu_freq_start_period(struct perf_event *event) +{ + int type = event->attr.type; + u64 config, factor; + s64 start; + + /* + * The 127 is the lowest possible recommended SAV (sample after value) + * for a 4000 freq (default freq), according to the event list JSON file. + * Also, assume the workload is idle 50% time. + */ + factor = 64 * 4000; + if (type != PERF_TYPE_HARDWARE && type != PERF_TYPE_HW_CACHE) + goto end; + + /* + * The estimation of the start period in the freq mode is + * based on the below assumption. + * + * For a cycles or an instructions event, 1GHZ of the + * underlying platform, 1 IPC. The workload is idle 50% time. + * The start period = 1,000,000,000 * 1 / freq / 2. + * = 500,000,000 / freq + * + * Usually, the branch-related events occur less than the + * instructions event. According to the Intel event list JSON + * file, the SAV (sample after value) of a branch-related event + * is usually 1/4 of an instruction event. + * The start period of branch-related events = 125,000,000 / freq. + * + * The cache-related events occurs even less. The SAV is usually + * 1/20 of an instruction event. + * The start period of cache-related events = 25,000,000 / freq. + */ + config = event->attr.config & PERF_HW_EVENT_MASK; + if (type == PERF_TYPE_HARDWARE) { + switch (config) { + case PERF_COUNT_HW_CPU_CYCLES: + case PERF_COUNT_HW_INSTRUCTIONS: + case PERF_COUNT_HW_BUS_CYCLES: + case PERF_COUNT_HW_STALLED_CYCLES_FRONTEND: + case PERF_COUNT_HW_STALLED_CYCLES_BACKEND: + case PERF_COUNT_HW_REF_CPU_CYCLES: + factor = 500000000; + break; + case PERF_COUNT_HW_BRANCH_INSTRUCTIONS: + case PERF_COUNT_HW_BRANCH_MISSES: + factor = 125000000; + break; + case PERF_COUNT_HW_CACHE_REFERENCES: + case PERF_COUNT_HW_CACHE_MISSES: + factor = 25000000; + break; + default: + goto end; + } + } + + if (type == PERF_TYPE_HW_CACHE) + factor = 25000000; +end: + /* + * Usually, a prime or a number with less factors (close to prime) + * is chosen as an SAV, which makes it less likely that the sampling + * period synchronizes with some periodic event in the workload. + * Minus 1 to make it at least avoiding values near power of twos + * for the default freq. + */ + start = DIV_ROUND_UP_ULL(factor, event->attr.sample_freq) - 1; + + if (start > x86_pmu.max_period) + start = x86_pmu.max_period; + + if (x86_pmu.limit_period) + x86_pmu.limit_period(event, &start); + + return start; +} + static int intel_pmu_hw_config(struct perf_event *event) { int ret = x86_pmu_hw_config(event); @@ -3728,6 +3807,12 @@ static int intel_pmu_hw_config(struct perf_event *event) if (ret) return ret;

+ if (event->attr.freq && event->attr.sample_freq) { + event->hw.sample_period = intel_pmu_freq_start_period(event); + event->hw.last_period = event->hw.sample_period; + local64_set(&event->hw.period_left, event->hw.sample_period); + } + if (event->attr.precise_ip) { if ((event->attr.config & INTEL_ARCH_EVENT_MASK) == INTEL_FIXED_VLBR_EVENT) return -EINVAL;

From: "Matthieu Baerts (NGI0)" matttbe@kernel.org

[ Upstream commit db75a16813aabae3b78c06b1b99f5e314c1f55d3 ]

Recently, some fallback have been initiated, while the connection was not supposed to fallback.

Add a safety check with a warning to detect when an wrong attempt to fallback is being done. This should help detecting any future issues quicker.

Acked-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-3-f550f636b435@ker... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/mptcp/protocol.h | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h index 6026f0bcdea60..b92646ddbf077 100644 --- a/net/mptcp/protocol.h +++ b/net/mptcp/protocol.h @@ -870,6 +870,8 @@ static inline void __mptcp_do_fallback(struct mptcp_sock *msk) pr_debug("TCP fallback already done (msk=%p)\n", msk); return; } + if (WARN_ON_ONCE(!READ_ONCE(msk->allow_infinite_fallback))) + return; set_bit(MPTCP_FALLBACK_DONE, &msk->flags); }

From: Ming Lei ming.lei@redhat.com

[ Upstream commit b654f7a51ffb386131de42aa98ed831f8c126546 ]

Device mapper bioset often has big bio_slab size, which can be more than 1000, then 8byte can't hold the slab name any more, cause the kmem_cache allocation warning of 'kmem_cache of name 'bio-108' already exists'.

Fix the warning by extending bio_slab->name to 12 bytes, but fix output of /proc/slabinfo

Reported-by: Guangwu Zhang guazhang@redhat.com Signed-off-by: Ming Lei ming.lei@redhat.com Link: https://lore.kernel.org/r/20250228132656.2838008-1-ming.lei@redhat.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/bio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/bio.c b/block/bio.c index 92399883bc5e1..029dba492ac2d 100644 --- a/block/bio.c +++ b/block/bio.c @@ -73,7 +73,7 @@ struct bio_slab { struct kmem_cache *slab; unsigned int slab_ref; unsigned int slab_size; - char name[8]; + char name[12]; }; static DEFINE_MUTEX(bio_slab_lock); static DEFINE_XARRAY(bio_slabs);