The patch below does not apply to the 6.17-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.17.y git checkout FETCH_HEAD git cherry-pick -x 6a5e9b9738a32229e2673d4eccfcbfe2ef3a1ab4 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2025101637-delegate-oversold-c71e@gregkh' --subject-prefix 'PATCH 6.17.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 6a5e9b9738a32229e2673d4eccfcbfe2ef3a1ab4 Mon Sep 17 00:00:00 2001 From: Viken Dadhaniya viken.dadhaniya@oss.qualcomm.com Date: Mon, 30 Jun 2025 12:13:38 +0530 Subject: [PATCH] arm64: dts: qcom: qcs615: add missing dt property in QUP SEs

Add the missing required-opps and operating-points-v2 properties to several I2C, SPI, and UART nodes in the QUP SEs.

Fixes: f6746dc9e379 ("arm64: dts: qcom: qcs615: Add QUPv3 configuration") Cc: stable@vger.kernel.org Signed-off-by: Viken Dadhaniya viken.dadhaniya@oss.qualcomm.com Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@oss.qualcomm.com Link: https://lore.kernel.org/r/20250630064338.2487409-1-viken.dadhaniya@oss.qualc... Signed-off-by: Bjorn Andersson andersson@kernel.org

diff --git a/arch/arm64/boot/dts/qcom/sm6150.dtsi b/arch/arm64/boot/dts/qcom/sm6150.dtsi index bfbb21035492..e033b53f0f0f 100644 --- a/arch/arm64/boot/dts/qcom/sm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6150.dtsi @@ -631,6 +631,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, interconnect-names = "qup-core", "qup-config"; power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; };

@@ -654,6 +655,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, "qup-config", "qup-memory"; power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", @@ -681,6 +683,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, "qup-config", "qup-memory"; power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", @@ -703,6 +706,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, interconnect-names = "qup-core", "qup-config"; power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, <&gpi_dma0 1 2 QCOM_GPI_SPI>; dma-names = "tx", @@ -728,6 +732,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, interconnect-names = "qup-core", "qup-config"; power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; };

@@ -751,6 +756,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, "qup-config", "qup-memory"; power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx",