On Mon Mar 24, 2025 at 4:30 PM CET, gregkh wrote:

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

The reason it doesn't apply is because this commit is missing: 5c96e6330197 ("arm64: dts: rockchip: adapt regulator nodenames to preferred form")

And that will likely affect many dts backports now and in the future. The same issue applies to the other stable kernel failures. The change is (essentially) a ``regulator-`` prefix on the regulator node names.

thanks,

greg k-h

Cheers, Diederik

------------------ original commit in Linus's tree ------------------

From bd1c959f37f384b477f51572331b0dc828bd009a Mon Sep 17 00:00:00 2001 From: Dragan Simic dsimic@manjaro.org Date: Sun, 2 Mar 2025 19:48:03 +0100 Subject: [PATCH] arm64: dts: rockchip: Add avdd HDMI supplies to RockPro64 board dtsi

Add missing "avdd-0v9-supply" and "avdd-1v8-supply" properties to the "hdmi" node in the Pine64 RockPro64 board dtsi file. To achieve this, also add the associated "vcca_0v9" regulator that produces the 0.9 V supply, [1][2] which hasn't been defined previously in the board dtsi file.

This also eliminates the following warnings from the kernel log:

dwhdmi-rockchip ff940000.hdmi: supply avdd-0v9 not found, using dummy regulator dwhdmi-rockchip ff940000.hdmi: supply avdd-1v8 not found, using dummy regulator

There are no functional changes to the way board works with these additions, because the "vcc1v8_dvp" and "vcca_0v9" regulators are always enabled, [1][2] but these additions improve the accuracy of hardware description.

These changes apply to the both supported hardware revisions of the Pine64 RockPro64, i.e. to the production-run revisions 2.0 and 2.1. [1][2]

[1] https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf [2] https://files.pine64.org/doc/rockpro64/rockpro64_v20-SCH.pdf

Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Rockpro64") Cc: stable@vger.kernel.org Suggested-by: Diederik de Haas didi.debian@cknow.org Signed-off-by: Dragan Simic dsimic@manjaro.org Tested-by: Diederik de Haas didi.debian@cknow.org Link: https://lore.kernel.org/r/df3d7e8fe74ed5e727e085b18c395260537bb5ac.174094109... Signed-off-by: Heiko Stuebner heiko@sntech.de

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index 69a9d6170649..47dc198706c8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -227,6 +227,16 @@ vcc5v0_usb: regulator-vcc5v0-usb { vin-supply = <&vcc12v_dcin>; };

• vcca_0v9: regulator-vcca-0v9 {

• compatible = "regulator-fixed";
  

• regulator-name = "vcca_0v9";
  

• regulator-always-on;
  

• regulator-boot-on;
  

• regulator-min-microvolt = <900000>;
  

• regulator-max-microvolt = <900000>;
  

• vin-supply = <&vcc3v3_sys>;
  

• };
• vdd_log: regulator-vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>;

@@ -312,6 +322,8 @@ &gmac { }; &hdmi {

• avdd-0v9-supply = <&vcca_0v9>;
• avdd-1v8-supply = <&vcc1v8_dvp>; ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec>;